Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 244 insertions, 0 deletions

diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
new file mode 100644
index 000000000..56866aaa2
--- /dev/null
+++ b/kernel/dma/Kconfig
@@ -0,0 +1,244 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config NO_DMA
+	bool
+
+config HAS_DMA
+	bool
+	depends on !NO_DMA
+	default y
+
+config DMA_OPS
+	depends on HAS_DMA
+	bool
+
+#
+# IOMMU drivers that can bypass the IOMMU code and optionally use the direct
+# mapping fast path should select this option and set the dma_ops_bypass
+# flag in struct device where applicable
+#
+config DMA_OPS_BYPASS
+	bool
+
+# Lets platform IOMMU driver choose between bypass and IOMMU
+config ARCH_HAS_DMA_MAP_DIRECT
+	bool
+
+config NEED_SG_DMA_LENGTH
+	bool
+
+config NEED_DMA_MAP_STATE
+	bool
+
+config ARCH_DMA_ADDR_T_64BIT
+	def_bool 64BIT || PHYS_ADDR_T_64BIT
+
+config ARCH_HAS_DMA_SET_MASK
+	bool
+
+#
+# Select this option if the architecture needs special handling for
+# DMA_ATTR_WRITE_COMBINE.  Normally the "uncached" mapping should be what
+# people thing of when saying write combine, so very few platforms should
+# need to enable this.
+#
+config ARCH_HAS_DMA_WRITE_COMBINE
+	bool
+
+#
+# Select if the architectures provides the arch_dma_mark_clean hook
+#
+config ARCH_HAS_DMA_MARK_CLEAN
+	bool
+
+config DMA_DECLARE_COHERENT
+	bool
+
+config ARCH_HAS_SETUP_DMA_OPS
+	bool
+
+config ARCH_HAS_TEARDOWN_DMA_OPS
+	bool
+
+config ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	bool
+
+config ARCH_HAS_SYNC_DMA_FOR_CPU
+	bool
+	select NEED_DMA_MAP_STATE
+
+config ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+	bool
+
+config ARCH_HAS_DMA_PREP_COHERENT
+	bool
+
+config ARCH_HAS_FORCE_DMA_UNENCRYPTED
+	bool
+
+config SWIOTLB
+	bool
+	select NEED_DMA_MAP_STATE
+
+config DMA_RESTRICTED_POOL
+	bool "DMA Restricted Pool"
+	depends on OF && OF_RESERVED_MEM && SWIOTLB
+	help
+	  This enables support for restricted DMA pools which provide a level of
+	  DMA memory protection on systems with limited hardware protection
+	  capabilities, such as those lacking an IOMMU.
+
+	  For more information see
+	  <Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt>
+	  and <kernel/dma/swiotlb.c>.
+	  If unsure, say "n".
+
+#
+# Should be selected if we can mmap non-coherent mappings to userspace.
+# The only thing that is really required is a way to set an uncached bit
+# in the pagetables
+#
+config DMA_NONCOHERENT_MMAP
+	default y if !MMU
+	bool
+
+config DMA_COHERENT_POOL
+	select GENERIC_ALLOCATOR
+	bool
+
+config DMA_GLOBAL_POOL
+	select DMA_DECLARE_COHERENT
+	bool
+
+config DMA_DIRECT_REMAP
+	bool
+	select DMA_COHERENT_POOL
+	select DMA_NONCOHERENT_MMAP
+
+config DMA_CMA
+	bool "DMA Contiguous Memory Allocator"
+	depends on HAVE_DMA_CONTIGUOUS && CMA
+	help
+	  This enables the Contiguous Memory Allocator which allows drivers
+	  to allocate big physically-contiguous blocks of memory for use with
+	  hardware components that do not support I/O map nor scatter-gather.
+
+	  You can disable CMA by specifying "cma=0" on the kernel's command
+	  line.
+
+	  For more information see <kernel/dma/contiguous.c>.
+	  If unsure, say "n".
+
+if  DMA_CMA
+
+config DMA_PERNUMA_CMA
+	bool "Enable separate DMA Contiguous Memory Area for each NUMA Node"
+	default NUMA && ARM64
+	help
+	  Enable this option to get pernuma CMA areas so that devices like
+	  ARM64 SMMU can get local memory by DMA coherent APIs.
+
+	  You can set the size of pernuma CMA by specifying "cma_pernuma=size"
+	  on the kernel's command line.
+
+comment "Default contiguous memory area size:"
+
+config CMA_SIZE_MBYTES
+	int "Size in Mega Bytes"
+	depends on !CMA_SIZE_SEL_PERCENTAGE
+	default 0 if X86
+	default 16
+	help
+	  Defines the size (in MiB) of the default memory area for Contiguous
+	  Memory Allocator.  If the size of 0 is selected, CMA is disabled by
+	  default, but it can be enabled by passing cma=size[MG] to the kernel.
+
+
+config CMA_SIZE_PERCENTAGE
+	int "Percentage of total memory"
+	depends on !CMA_SIZE_SEL_MBYTES
+	default 0 if X86
+	default 10
+	help
+	  Defines the size of the default memory area for Contiguous Memory
+	  Allocator as a percentage of the total memory in the system.
+	  If 0 percent is selected, CMA is disabled by default, but it can be
+	  enabled by passing cma=size[MG] to the kernel.
+
+choice
+	prompt "Selected region size"
+	default CMA_SIZE_SEL_MBYTES
+
+config CMA_SIZE_SEL_MBYTES
+	bool "Use mega bytes value only"
+
+config CMA_SIZE_SEL_PERCENTAGE
+	bool "Use percentage value only"
+
+config CMA_SIZE_SEL_MIN
+	bool "Use lower value (minimum)"
+
+config CMA_SIZE_SEL_MAX
+	bool "Use higher value (maximum)"
+
+endchoice
+
+config CMA_ALIGNMENT
+	int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
+	range 2 12
+	default 8
+	help
+	  DMA mapping framework by default aligns all buffers to the smallest
+	  PAGE_SIZE order which is greater than or equal to the requested buffer
+	  size. This works well for buffers up to a few hundreds kilobytes, but
+	  for larger buffers it just a memory waste. With this parameter you can
+	  specify the maximum PAGE_SIZE order for contiguous buffers. Larger
+	  buffers will be aligned only to this specified order. The order is
+	  expressed as a power of two multiplied by the PAGE_SIZE.
+
+	  For example, if your system defaults to 4KiB pages, the order value
+	  of 8 means that the buffers will be aligned up to 1MiB only.
+
+	  If unsure, leave the default value "8".
+
+endif
+
+config DMA_API_DEBUG
+	bool "Enable debugging of DMA-API usage"
+	select NEED_DMA_MAP_STATE
+	help
+	  Enable this option to debug the use of the DMA API by device drivers.
+	  With this option you will be able to detect common bugs in device
+	  drivers like double-freeing of DMA mappings or freeing mappings that
+	  were never allocated.
+
+	  This option causes a performance degradation.  Use only if you want to
+	  debug device drivers and dma interactions.
+
+	  If unsure, say N.
+
+config DMA_API_DEBUG_SG
+	bool "Debug DMA scatter-gather usage"
+	default y
+	depends on DMA_API_DEBUG
+	help
+	  Perform extra checking that callers of dma_map_sg() have respected the
+	  appropriate segment length/boundary limits for the given device when
+	  preparing DMA scatterlists.
+
+	  This is particularly likely to have been overlooked in cases where the
+	  dma_map_sg() API is used for general bulk mapping of pages rather than
+	  preparing literal scatter-gather descriptors, where there is a risk of
+	  unexpected behaviour from DMA API implementations if the scatterlist
+	  is technically out-of-spec.
+
+	  If unsure, say N.
+
+config DMA_MAP_BENCHMARK
+	bool "Enable benchmarking of streaming DMA mapping"
+	depends on DEBUG_FS
+	help
+	  Provides /sys/kernel/debug/dma_map_benchmark that helps with testing
+	  performance of dma_(un)map_page.
+
+	  See tools/testing/selftests/dma/dma_map_benchmark.c