Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2833 insertions, 0 deletions

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
new file mode 100644
index 000000000..95541b99a
--- /dev/null
+++ b/lib/Kconfig.debug
@@ -0,0 +1,2833 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Kernel hacking"
+
+menu "printk and dmesg options"
+
+config PRINTK_TIME
+	bool "Show timing information on printks"
+	depends on PRINTK
+	help
+	  Selecting this option causes time stamps of the printk()
+	  messages to be added to the output of the syslog() system
+	  call and at the console.
+
+	  The timestamp is always recorded internally, and exported
+	  to /dev/kmsg. This flag just specifies if the timestamp should
+	  be included, not that the timestamp is recorded.
+
+	  The behavior is also controlled by the kernel command line
+	  parameter printk.time=1. See Documentation/admin-guide/kernel-parameters.rst
+
+config PRINTK_CALLER
+	bool "Show caller information on printks"
+	depends on PRINTK
+	help
+	  Selecting this option causes printk() to add a caller "thread id" (if
+	  in task context) or a caller "processor id" (if not in task context)
+	  to every message.
+
+	  This option is intended for environments where multiple threads
+	  concurrently call printk() for many times, for it is difficult to
+	  interpret without knowing where these lines (or sometimes individual
+	  line which was divided into multiple lines due to race) came from.
+
+	  Since toggling after boot makes the code racy, currently there is
+	  no option to enable/disable at the kernel command line parameter or
+	  sysfs interface.
+
+config STACKTRACE_BUILD_ID
+	bool "Show build ID information in stacktraces"
+	depends on PRINTK
+	help
+	  Selecting this option adds build ID information for symbols in
+	  stacktraces printed with the printk format '%p[SR]b'.
+
+	  This option is intended for distros where debuginfo is not easily
+	  accessible but can be downloaded given the build ID of the vmlinux or
+	  kernel module where the function is located.
+
+config CONSOLE_LOGLEVEL_DEFAULT
+	int "Default console loglevel (1-15)"
+	range 1 15
+	default "7"
+	help
+	  Default loglevel to determine what will be printed on the console.
+
+	  Setting a default here is equivalent to passing in loglevel=<x> in
+	  the kernel bootargs. loglevel=<x> continues to override whatever
+	  value is specified here as well.
+
+	  Note: This does not affect the log level of un-prefixed printk()
+	  usage in the kernel. That is controlled by the MESSAGE_LOGLEVEL_DEFAULT
+	  option.
+
+config CONSOLE_LOGLEVEL_QUIET
+	int "quiet console loglevel (1-15)"
+	range 1 15
+	default "4"
+	help
+	  loglevel to use when "quiet" is passed on the kernel commandline.
+
+	  When "quiet" is passed on the kernel commandline this loglevel
+	  will be used as the loglevel. IOW passing "quiet" will be the
+	  equivalent of passing "loglevel=<CONSOLE_LOGLEVEL_QUIET>"
+
+config MESSAGE_LOGLEVEL_DEFAULT
+	int "Default message log level (1-7)"
+	range 1 7
+	default "4"
+	help
+	  Default log level for printk statements with no specified priority.
+
+	  This was hard-coded to KERN_WARNING since at least 2.6.10 but folks
+	  that are auditing their logs closely may want to set it to a lower
+	  priority.
+
+	  Note: This does not affect what message level gets printed on the console
+	  by default. To change that, use loglevel=<x> in the kernel bootargs,
+	  or pick a different CONSOLE_LOGLEVEL_DEFAULT configuration value.
+
+config BOOT_PRINTK_DELAY
+	bool "Delay each boot printk message by N milliseconds"
+	depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY
+	help
+	  This build option allows you to read kernel boot messages
+	  by inserting a short delay after each one.  The delay is
+	  specified in milliseconds on the kernel command line,
+	  using "boot_delay=N".
+
+	  It is likely that you would also need to use "lpj=M" to preset
+	  the "loops per jiffie" value.
+	  See a previous boot log for the "lpj" value to use for your
+	  system, and then set "lpj=M" before setting "boot_delay=N".
+	  NOTE:  Using this option may adversely affect SMP systems.
+	  I.e., processors other than the first one may not boot up.
+	  BOOT_PRINTK_DELAY also may cause LOCKUP_DETECTOR to detect
+	  what it believes to be lockup conditions.
+
+config DYNAMIC_DEBUG
+	bool "Enable dynamic printk() support"
+	default n
+	depends on PRINTK
+	depends on (DEBUG_FS || PROC_FS)
+	select DYNAMIC_DEBUG_CORE
+	help
+
+	  Compiles debug level messages into the kernel, which would not
+	  otherwise be available at runtime. These messages can then be
+	  enabled/disabled based on various levels of scope - per source file,
+	  function, module, format string, and line number. This mechanism
+	  implicitly compiles in all pr_debug() and dev_dbg() calls, which
+	  enlarges the kernel text size by about 2%.
+
+	  If a source file is compiled with DEBUG flag set, any
+	  pr_debug() calls in it are enabled by default, but can be
+	  disabled at runtime as below.  Note that DEBUG flag is
+	  turned on by many CONFIG_*DEBUG* options.
+
+	  Usage:
+
+	  Dynamic debugging is controlled via the 'dynamic_debug/control' file,
+	  which is contained in the 'debugfs' filesystem or procfs.
+	  Thus, the debugfs or procfs filesystem must first be mounted before
+	  making use of this feature.
+	  We refer the control file as: <debugfs>/dynamic_debug/control. This
+	  file contains a list of the debug statements that can be enabled. The
+	  format for each line of the file is:
+
+		filename:lineno [module]function flags format
+
+	  filename : source file of the debug statement
+	  lineno : line number of the debug statement
+	  module : module that contains the debug statement
+	  function : function that contains the debug statement
+	  flags : '=p' means the line is turned 'on' for printing
+	  format : the format used for the debug statement
+
+	  From a live system:
+
+		nullarbor:~ # cat <debugfs>/dynamic_debug/control
+		# filename:lineno [module]function flags format
+		fs/aio.c:222 [aio]__put_ioctx =_ "__put_ioctx:\040freeing\040%p\012"
+		fs/aio.c:248 [aio]ioctx_alloc =_ "ENOMEM:\040nr_events\040too\040high\012"
+		fs/aio.c:1770 [aio]sys_io_cancel =_ "calling\040cancel\012"
+
+	  Example usage:
+
+		// enable the message at line 1603 of file svcsock.c
+		nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+						<debugfs>/dynamic_debug/control
+
+		// enable all the messages in file svcsock.c
+		nullarbor:~ # echo -n 'file svcsock.c +p' >
+						<debugfs>/dynamic_debug/control
+
+		// enable all the messages in the NFS server module
+		nullarbor:~ # echo -n 'module nfsd +p' >
+						<debugfs>/dynamic_debug/control
+
+		// enable all 12 messages in the function svc_process()
+		nullarbor:~ # echo -n 'func svc_process +p' >
+						<debugfs>/dynamic_debug/control
+
+		// disable all 12 messages in the function svc_process()
+		nullarbor:~ # echo -n 'func svc_process -p' >
+						<debugfs>/dynamic_debug/control
+
+	  See Documentation/admin-guide/dynamic-debug-howto.rst for additional
+	  information.
+
+config DYNAMIC_DEBUG_CORE
+	bool "Enable core function of dynamic debug support"
+	depends on PRINTK
+	depends on (DEBUG_FS || PROC_FS)
+	help
+	  Enable core functional support of dynamic debug. It is useful
+	  when you want to tie dynamic debug to your kernel modules with
+	  DYNAMIC_DEBUG_MODULE defined for each of them, especially for
+	  the case of embedded system where the kernel image size is
+	  sensitive for people.
+
+config SYMBOLIC_ERRNAME
+	bool "Support symbolic error names in printf"
+	default y if PRINTK
+	help
+	  If you say Y here, the kernel's printf implementation will
+	  be able to print symbolic error names such as ENOSPC instead
+	  of the number 28. It makes the kernel image slightly larger
+	  (about 3KB), but can make the kernel logs easier to read.
+
+config DEBUG_BUGVERBOSE
+	bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EXPERT
+	depends on BUG && (GENERIC_BUG || HAVE_DEBUG_BUGVERBOSE)
+	default y
+	help
+	  Say Y here to make BUG() panics output the file name and line number
+	  of the BUG call as well as the EIP and oops trace.  This aids
+	  debugging but costs about 70-100K of memory.
+
+endmenu # "printk and dmesg options"
+
+config DEBUG_KERNEL
+	bool "Kernel debugging"
+	help
+	  Say Y here if you are developing drivers or trying to debug and
+	  identify kernel problems.
+
+config DEBUG_MISC
+	bool "Miscellaneous debug code"
+	default DEBUG_KERNEL
+	depends on DEBUG_KERNEL
+	help
+	  Say Y here if you need to enable miscellaneous debug code that should
+	  be under a more specific debug option but isn't.
+
+menu "Compile-time checks and compiler options"
+
+config DEBUG_INFO
+	bool
+	help
+	  A kernel debug info option other than "None" has been selected
+	  in the "Debug information" choice below, indicating that debug
+	  information will be generated for build targets.
+
+# Clang is known to generate .{s,u}leb128 with symbol deltas with DWARF5, which
+# some targets may not support: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
+config AS_HAS_NON_CONST_LEB128
+	def_bool $(as-instr,.uleb128 .Lexpr_end4 - .Lexpr_start3\n.Lexpr_start3:\n.Lexpr_end4:)
+
+choice
+	prompt "Debug information"
+	depends on DEBUG_KERNEL
+	help
+	  Selecting something other than "None" results in a kernel image
+	  that will include debugging info resulting in a larger kernel image.
+	  This adds debug symbols to the kernel and modules (gcc -g), and
+	  is needed if you intend to use kernel crashdump or binary object
+	  tools like crash, kgdb, LKCD, gdb, etc on the kernel.
+
+	  Choose which version of DWARF debug info to emit. If unsure,
+	  select "Toolchain default".
+
+config DEBUG_INFO_NONE
+	bool "Disable debug information"
+	help
+	  Do not build the kernel with debugging information, which will
+	  result in a faster and smaller build.
+
+config DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
+	bool "Rely on the toolchain's implicit default DWARF version"
+	select DEBUG_INFO
+	depends on !CC_IS_CLANG || AS_IS_LLVM || CLANG_VERSION < 140000 || (AS_IS_GNU && AS_VERSION >= 23502 && AS_HAS_NON_CONST_LEB128)
+	help
+	  The implicit default version of DWARF debug info produced by a
+	  toolchain changes over time.
+
+	  This can break consumers of the debug info that haven't upgraded to
+	  support newer revisions, and prevent testing newer versions, but
+	  those should be less common scenarios.
+
+config DEBUG_INFO_DWARF4
+	bool "Generate DWARF Version 4 debuginfo"
+	select DEBUG_INFO
+	depends on !CC_IS_CLANG || AS_IS_LLVM || (AS_IS_GNU && AS_VERSION >= 23502)
+	help
+	  Generate DWARF v4 debug info. This requires gcc 4.5+, binutils 2.35.2
+	  if using clang without clang's integrated assembler, and gdb 7.0+.
+
+	  If you have consumers of DWARF debug info that are not ready for
+	  newer revisions of DWARF, you may wish to choose this or have your
+	  config select this.
+
+config DEBUG_INFO_DWARF5
+	bool "Generate DWARF Version 5 debuginfo"
+	select DEBUG_INFO
+	depends on !CC_IS_CLANG || AS_IS_LLVM || (AS_IS_GNU && AS_VERSION >= 23502 && AS_HAS_NON_CONST_LEB128)
+	help
+	  Generate DWARF v5 debug info. Requires binutils 2.35.2, gcc 5.0+ (gcc
+	  5.0+ accepts the -gdwarf-5 flag but only had partial support for some
+	  draft features until 7.0), and gdb 8.0+.
+
+	  Changes to the structure of debug info in Version 5 allow for around
+	  15-18% savings in resulting image and debug info section sizes as
+	  compared to DWARF Version 4. DWARF Version 5 standardizes previous
+	  extensions such as accelerators for symbol indexing and the format
+	  for fission (.dwo/.dwp) files. Users may not want to select this
+	  config if they rely on tooling that has not yet been updated to
+	  support DWARF Version 5.
+
+endchoice # "Debug information"
+
+if DEBUG_INFO
+
+config DEBUG_INFO_REDUCED
+	bool "Reduce debugging information"
+	help
+	  If you say Y here gcc is instructed to generate less debugging
+	  information for structure types. This means that tools that
+	  need full debugging information (like kgdb or systemtap) won't
+	  be happy. But if you merely need debugging information to
+	  resolve line numbers there is no loss. Advantage is that
+	  build directory object sizes shrink dramatically over a full
+	  DEBUG_INFO build and compile times are reduced too.
+	  Only works with newer gcc versions.
+
+config DEBUG_INFO_COMPRESSED
+	bool "Compressed debugging information"
+	depends on $(cc-option,-gz=zlib)
+	depends on $(ld-option,--compress-debug-sections=zlib)
+	help
+	  Compress the debug information using zlib.  Requires GCC 5.0+ or Clang
+	  5.0+, binutils 2.26+, and zlib.
+
+	  Users of dpkg-deb via scripts/package/builddeb may find an increase in
+	  size of their debug .deb packages with this config set, due to the
+	  debug info being compressed with zlib, then the object files being
+	  recompressed with a different compression scheme. But this is still
+	  preferable to setting $KDEB_COMPRESS to "none" which would be even
+	  larger.
+
+config DEBUG_INFO_SPLIT
+	bool "Produce split debuginfo in .dwo files"
+	depends on $(cc-option,-gsplit-dwarf)
+	help
+	  Generate debug info into separate .dwo files. This significantly
+	  reduces the build directory size for builds with DEBUG_INFO,
+	  because it stores the information only once on disk in .dwo
+	  files instead of multiple times in object files and executables.
+	  In addition the debug information is also compressed.
+
+	  Requires recent gcc (4.7+) and recent gdb/binutils.
+	  Any tool that packages or reads debug information would need
+	  to know about the .dwo files and include them.
+	  Incompatible with older versions of ccache.
+
+config DEBUG_INFO_BTF
+	bool "Generate BTF typeinfo"
+	depends on !DEBUG_INFO_SPLIT && !DEBUG_INFO_REDUCED
+	depends on !GCC_PLUGIN_RANDSTRUCT || COMPILE_TEST
+	depends on BPF_SYSCALL
+	depends on !DEBUG_INFO_DWARF5 || PAHOLE_VERSION >= 121
+	help
+	  Generate deduplicated BTF type information from DWARF debug info.
+	  Turning this on expects presence of pahole tool, which will convert
+	  DWARF type info into equivalent deduplicated BTF type info.
+
+config PAHOLE_HAS_SPLIT_BTF
+	def_bool PAHOLE_VERSION >= 119
+
+config PAHOLE_HAS_BTF_TAG
+	def_bool PAHOLE_VERSION >= 123
+	depends on CC_IS_CLANG
+	help
+	  Decide whether pahole emits btf_tag attributes (btf_type_tag and
+	  btf_decl_tag) or not. Currently only clang compiler implements
+	  these attributes, so make the config depend on CC_IS_CLANG.
+
+config PAHOLE_HAS_LANG_EXCLUDE
+	def_bool PAHOLE_VERSION >= 124
+	help
+	  Support for the --lang_exclude flag which makes pahole exclude
+	  compilation units from the supplied language. Used in Kbuild to
+	  omit Rust CUs which are not supported in version 1.24 of pahole,
+	  otherwise it would emit malformed kernel and module binaries when
+	  using DEBUG_INFO_BTF_MODULES.
+
+config DEBUG_INFO_BTF_MODULES
+	def_bool y
+	depends on DEBUG_INFO_BTF && MODULES && PAHOLE_HAS_SPLIT_BTF
+	help
+	  Generate compact split BTF type information for kernel modules.
+
+config MODULE_ALLOW_BTF_MISMATCH
+	bool "Allow loading modules with non-matching BTF type info"
+	depends on DEBUG_INFO_BTF_MODULES
+	help
+	  For modules whose split BTF does not match vmlinux, load without
+	  BTF rather than refusing to load. The default behavior with
+	  module BTF enabled is to reject modules with such mismatches;
+	  this option will still load module BTF where possible but ignore
+	  it when a mismatch is found.
+
+config GDB_SCRIPTS
+	bool "Provide GDB scripts for kernel debugging"
+	help
+	  This creates the required links to GDB helper scripts in the
+	  build directory. If you load vmlinux into gdb, the helper
+	  scripts will be automatically imported by gdb as well, and
+	  additional functions are available to analyze a Linux kernel
+	  instance. See Documentation/dev-tools/gdb-kernel-debugging.rst
+	  for further details.
+
+endif # DEBUG_INFO
+
+config FRAME_WARN
+	int "Warn for stack frames larger than"
+	range 0 8192
+	default 0 if KMSAN
+	default 2048 if GCC_PLUGIN_LATENT_ENTROPY
+	default 2048 if PARISC
+	default 1536 if (!64BIT && XTENSA)
+	default 1280 if KASAN && !64BIT
+	default 1024 if !64BIT
+	default 2048 if 64BIT
+	help
+	  Tell the compiler to warn at build time for stack frames larger than this.
+	  Setting this too low will cause a lot of warnings.
+	  Setting it to 0 disables the warning.
+
+config STRIP_ASM_SYMS
+	bool "Strip assembler-generated symbols during link"
+	default n
+	help
+	  Strip internal assembler-generated symbols during a link (symbols
+	  that look like '.Lxxx') so they don't pollute the output of
+	  get_wchan() and suchlike.
+
+config READABLE_ASM
+	bool "Generate readable assembler code"
+	depends on DEBUG_KERNEL
+	depends on CC_IS_GCC
+	help
+	  Disable some compiler optimizations that tend to generate human unreadable
+	  assembler output. This may make the kernel slightly slower, but it helps
+	  to keep kernel developers who have to stare a lot at assembler listings
+	  sane.
+
+config HEADERS_INSTALL
+	bool "Install uapi headers to usr/include"
+	depends on !UML
+	help
+	  This option will install uapi headers (headers exported to user-space)
+	  into the usr/include directory for use during the kernel build.
+	  This is unneeded for building the kernel itself, but needed for some
+	  user-space program samples. It is also needed by some features such
+	  as uapi header sanity checks.
+
+config DEBUG_SECTION_MISMATCH
+	bool "Enable full Section mismatch analysis"
+	depends on CC_IS_GCC
+	help
+	  The section mismatch analysis checks if there are illegal
+	  references from one section to another section.
+	  During linktime or runtime, some sections are dropped;
+	  any use of code/data previously in these sections would
+	  most likely result in an oops.
+	  In the code, functions and variables are annotated with
+	  __init,, etc. (see the full list in include/linux/init.h),
+	  which results in the code/data being placed in specific sections.
+	  The section mismatch analysis is always performed after a full
+	  kernel build, and enabling this option causes the following
+	  additional step to occur:
+	  - Add the option -fno-inline-functions-called-once to gcc commands.
+	    When inlining a function annotated with __init in a non-init
+	    function, we would lose the section information and thus
+	    the analysis would not catch the illegal reference.
+	    This option tells gcc to inline less (but it does result in
+	    a larger kernel).
+
+config SECTION_MISMATCH_WARN_ONLY
+	bool "Make section mismatch errors non-fatal"
+	default y
+	help
+	  If you say N here, the build process will fail if there are any
+	  section mismatch, instead of just throwing warnings.
+
+	  If unsure, say Y.
+
+config DEBUG_FORCE_FUNCTION_ALIGN_64B
+	bool "Force all function address 64B aligned"
+	depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
+	help
+	  There are cases that a commit from one domain changes the function
+	  address alignment of other domains, and cause magic performance
+	  bump (regression or improvement). Enable this option will help to
+	  verify if the bump is caused by function alignment changes, while
+	  it will slightly increase the kernel size and affect icache usage.
+
+	  It is mainly for debug and performance tuning use.
+
+#
+# Select this config option from the architecture Kconfig, if it
+# is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+	bool
+
+config FRAME_POINTER
+	bool "Compile the kernel with frame pointers"
+	depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
+	default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
+	help
+	  If you say Y here the resulting kernel image will be slightly
+	  larger and slower, but it gives very useful debugging information
+	  in case of kernel bugs. (precise oopses/stacktraces/warnings)
+
+config OBJTOOL
+	bool
+
+config STACK_VALIDATION
+	bool "Compile-time stack metadata validation"
+	depends on HAVE_STACK_VALIDATION && UNWINDER_FRAME_POINTER
+	select OBJTOOL
+	default n
+	help
+	  Validate frame pointer rules at compile-time.  This helps ensure that
+	  runtime stack traces are more reliable.
+
+	  For more information, see
+	  tools/objtool/Documentation/objtool.txt.
+
+config NOINSTR_VALIDATION
+	bool
+	depends on HAVE_NOINSTR_VALIDATION && DEBUG_ENTRY
+	select OBJTOOL
+	default y
+
+config VMLINUX_MAP
+	bool "Generate vmlinux.map file when linking"
+	depends on EXPERT
+	help
+	  Selecting this option will pass "-Map=vmlinux.map" to ld
+	  when linking vmlinux. That file can be useful for verifying
+	  and debugging magic section games, and for seeing which
+	  pieces of code get eliminated with
+	  CONFIG_LD_DEAD_CODE_DATA_ELIMINATION.
+
+config DEBUG_FORCE_WEAK_PER_CPU
+	bool "Force weak per-cpu definitions"
+	depends on DEBUG_KERNEL
+	help
+	  s390 and alpha require percpu variables in modules to be
+	  defined weak to work around addressing range issue which
+	  puts the following two restrictions on percpu variable
+	  definitions.
+
+	  1. percpu symbols must be unique whether static or not
+	  2. percpu variables can't be defined inside a function
+
+	  To ensure that generic code follows the above rules, this
+	  option forces all percpu variables to be defined as weak.
+
+endmenu # "Compiler options"
+
+menu "Generic Kernel Debugging Instruments"
+
+config MAGIC_SYSRQ
+	bool "Magic SysRq key"
+	depends on !UML
+	help
+	  If you say Y here, you will have some control over the system even
+	  if the system crashes for example during kernel debugging (e.g., you
+	  will be able to flush the buffer cache to disk, reboot the system
+	  immediately or dump some status information). This is accomplished
+	  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+	  also works on a serial console (on PC hardware at least), if you
+	  send a BREAK and then within 5 seconds a command keypress. The
+	  keys are documented in <file:Documentation/admin-guide/sysrq.rst>.
+	  Don't say Y unless you really know what this hack does.
+
+config MAGIC_SYSRQ_DEFAULT_ENABLE
+	hex "Enable magic SysRq key functions by default"
+	depends on MAGIC_SYSRQ
+	default 0x1
+	help
+	  Specifies which SysRq key functions are enabled by default.
+	  This may be set to 1 or 0 to enable or disable them all, or
+	  to a bitmask as described in Documentation/admin-guide/sysrq.rst.
+
+config MAGIC_SYSRQ_SERIAL
+	bool "Enable magic SysRq key over serial"
+	depends on MAGIC_SYSRQ
+	default y
+	help
+	  Many embedded boards have a disconnected TTL level serial which can
+	  generate some garbage that can lead to spurious false sysrq detects.
+	  This option allows you to decide whether you want to enable the
+	  magic SysRq key.
+
+config MAGIC_SYSRQ_SERIAL_SEQUENCE
+	string "Char sequence that enables magic SysRq over serial"
+	depends on MAGIC_SYSRQ_SERIAL
+	default ""
+	help
+	  Specifies a sequence of characters that can follow BREAK to enable
+	  SysRq on a serial console.
+
+	  If unsure, leave an empty string and the option will not be enabled.
+
+config DEBUG_FS
+	bool "Debug Filesystem"
+	help
+	  debugfs is a virtual file system that kernel developers use to put
+	  debugging files into.  Enable this option to be able to read and
+	  write to these files.
+
+	  For detailed documentation on the debugfs API, see
+	  Documentation/filesystems/.
+
+	  If unsure, say N.
+
+choice
+	prompt "Debugfs default access"
+	depends on DEBUG_FS
+	default DEBUG_FS_ALLOW_ALL
+	help
+	  This selects the default access restrictions for debugfs.
+	  It can be overridden with kernel command line option
+	  debugfs=[on,no-mount,off]. The restrictions apply for API access
+	  and filesystem registration.
+
+config DEBUG_FS_ALLOW_ALL
+	bool "Access normal"
+	help
+	  No restrictions apply. Both API and filesystem registration
+	  is on. This is the normal default operation.
+
+config DEBUG_FS_DISALLOW_MOUNT
+	bool "Do not register debugfs as filesystem"
+	help
+	  The API is open but filesystem is not loaded. Clients can still do
+	  their work and read with debug tools that do not need
+	  debugfs filesystem.
+
+config DEBUG_FS_ALLOW_NONE
+	bool "No access"
+	help
+	  Access is off. Clients get -PERM when trying to create nodes in
+	  debugfs tree and debugfs is not registered as a filesystem.
+	  Client can then back-off or continue without debugfs access.
+
+endchoice
+
+source "lib/Kconfig.kgdb"
+source "lib/Kconfig.ubsan"
+source "lib/Kconfig.kcsan"
+
+endmenu
+
+menu "Networking Debugging"
+
+source "net/Kconfig.debug"
+
+endmenu # "Networking Debugging"
+
+menu "Memory Debugging"
+
+source "mm/Kconfig.debug"
+
+config DEBUG_OBJECTS
+	bool "Debug object operations"
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here, additional code will be inserted into the
+	  kernel to track the life time of various objects and validate
+	  the operations on those objects.
+
+config DEBUG_OBJECTS_SELFTEST
+	bool "Debug objects selftest"
+	depends on DEBUG_OBJECTS
+	help
+	  This enables the selftest of the object debug code.
+
+config DEBUG_OBJECTS_FREE
+	bool "Debug objects in freed memory"
+	depends on DEBUG_OBJECTS
+	help
+	  This enables checks whether a k/v free operation frees an area
+	  which contains an object which has not been deactivated
+	  properly. This can make kmalloc/kfree-intensive workloads
+	  much slower.
+
+config DEBUG_OBJECTS_TIMERS
+	bool "Debug timer objects"
+	depends on DEBUG_OBJECTS
+	help
+	  If you say Y here, additional code will be inserted into the
+	  timer routines to track the life time of timer objects and
+	  validate the timer operations.
+
+config DEBUG_OBJECTS_WORK
+	bool "Debug work objects"
+	depends on DEBUG_OBJECTS
+	help
+	  If you say Y here, additional code will be inserted into the
+	  work queue routines to track the life time of work objects and
+	  validate the work operations.
+
+config DEBUG_OBJECTS_RCU_HEAD
+	bool "Debug RCU callbacks objects"
+	depends on DEBUG_OBJECTS
+	help
+	  Enable this to turn on debugging of RCU list heads (call_rcu() usage).
+
+config DEBUG_OBJECTS_PERCPU_COUNTER
+	bool "Debug percpu counter objects"
+	depends on DEBUG_OBJECTS
+	help
+	  If you say Y here, additional code will be inserted into the
+	  percpu counter routines to track the life time of percpu counter
+	  objects and validate the percpu counter operations.
+
+config DEBUG_OBJECTS_ENABLE_DEFAULT
+	int "debug_objects bootup default value (0-1)"
+	range 0 1
+	default "1"
+	depends on DEBUG_OBJECTS
+	help
+	  Debug objects boot parameter default value
+
+config SHRINKER_DEBUG
+	bool "Enable shrinker debugging support"
+	depends on DEBUG_FS
+	help
+	  Say Y to enable the shrinker debugfs interface which provides
+	  visibility into the kernel memory shrinkers subsystem.
+	  Disable it to avoid an extra memory footprint.
+
+config HAVE_DEBUG_KMEMLEAK
+	bool
+
+config DEBUG_KMEMLEAK
+	bool "Kernel memory leak detector"
+	depends on DEBUG_KERNEL && HAVE_DEBUG_KMEMLEAK
+	select DEBUG_FS
+	select STACKTRACE if STACKTRACE_SUPPORT
+	select KALLSYMS
+	select CRC32
+	help
+	  Say Y here if you want to enable the memory leak
+	  detector. The memory allocation/freeing is traced in a way
+	  similar to the Boehm's conservative garbage collector, the
+	  difference being that the orphan objects are not freed but
+	  only shown in /sys/kernel/debug/kmemleak. Enabling this
+	  feature will introduce an overhead to memory
+	  allocations. See Documentation/dev-tools/kmemleak.rst for more
+	  details.
+
+	  Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
+	  of finding leaks due to the slab objects poisoning.
+
+	  In order to access the kmemleak file, debugfs needs to be
+	  mounted (usually at /sys/kernel/debug).
+
+config DEBUG_KMEMLEAK_MEM_POOL_SIZE
+	int "Kmemleak memory pool size"
+	depends on DEBUG_KMEMLEAK
+	range 200 1000000
+	default 16000
+	help
+	  Kmemleak must track all the memory allocations to avoid
+	  reporting false positives. Since memory may be allocated or
+	  freed before kmemleak is fully initialised, use a static pool
+	  of metadata objects to track such callbacks. After kmemleak is
+	  fully initialised, this memory pool acts as an emergency one
+	  if slab allocations fail.
+
+config DEBUG_KMEMLEAK_TEST
+	tristate "Simple test for the kernel memory leak detector"
+	depends on DEBUG_KMEMLEAK && m
+	help
+	  This option enables a module that explicitly leaks memory.
+
+	  If unsure, say N.
+
+config DEBUG_KMEMLEAK_DEFAULT_OFF
+	bool "Default kmemleak to off"
+	depends on DEBUG_KMEMLEAK
+	help
+	  Say Y here to disable kmemleak by default. It can then be enabled
+	  on the command line via kmemleak=on.
+
+config DEBUG_KMEMLEAK_AUTO_SCAN
+	bool "Enable kmemleak auto scan thread on boot up"
+	default y
+	depends on DEBUG_KMEMLEAK
+	help
+	  Depending on the cpu, kmemleak scan may be cpu intensive and can
+	  stall user tasks at times. This option enables/disables automatic
+	  kmemleak scan at boot up.
+
+	  Say N here to disable kmemleak auto scan thread to stop automatic
+	  scanning. Disabling this option disables automatic reporting of
+	  memory leaks.
+
+	  If unsure, say Y.
+
+config DEBUG_STACK_USAGE
+	bool "Stack utilization instrumentation"
+	depends on DEBUG_KERNEL && !IA64
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config SCHED_STACK_END_CHECK
+	bool "Detect stack corruption on calls to schedule()"
+	depends on DEBUG_KERNEL
+	default n
+	help
+	  This option checks for a stack overrun on calls to schedule().
+	  If the stack end location is found to be over written always panic as
+	  the content of the corrupted region can no longer be trusted.
+	  This is to ensure no erroneous behaviour occurs which could result in
+	  data corruption or a sporadic crash at a later stage once the region
+	  is examined. The runtime overhead introduced is minimal.
+
+config ARCH_HAS_DEBUG_VM_PGTABLE
+	bool
+	help
+	  An architecture should select this when it can successfully
+	  build and run DEBUG_VM_PGTABLE.
+
+config DEBUG_VM_IRQSOFF
+	def_bool DEBUG_VM && !PREEMPT_RT
+
+config DEBUG_VM
+	bool "Debug VM"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to turn on extended checks in the virtual-memory system
+	  that may impact performance.
+
+	  If unsure, say N.
+
+config DEBUG_VM_MAPLE_TREE
+	bool "Debug VM maple trees"
+	depends on DEBUG_VM
+	select DEBUG_MAPLE_TREE
+	help
+	  Enable VM maple tree debugging information and extra validations.
+
+	  If unsure, say N.
+
+config DEBUG_VM_RB
+	bool "Debug VM red-black trees"
+	depends on DEBUG_VM
+	help
+	  Enable VM red-black tree debugging information and extra validations.
+
+	  If unsure, say N.
+
+config DEBUG_VM_PGFLAGS
+	bool "Debug page-flags operations"
+	depends on DEBUG_VM
+	help
+	  Enables extra validation on page flags operations.
+
+	  If unsure, say N.
+
+config DEBUG_VM_PGTABLE
+	bool "Debug arch page table for semantics compliance"
+	depends on MMU
+	depends on ARCH_HAS_DEBUG_VM_PGTABLE
+	default y if DEBUG_VM
+	help
+	  This option provides a debug method which can be used to test
+	  architecture page table helper functions on various platforms in
+	  verifying if they comply with expected generic MM semantics. This
+	  will help architecture code in making sure that any changes or
+	  new additions of these helpers still conform to expected
+	  semantics of the generic MM. Platforms will have to opt in for
+	  this through ARCH_HAS_DEBUG_VM_PGTABLE.
+
+	  If unsure, say N.
+
+config ARCH_HAS_DEBUG_VIRTUAL
+	bool
+
+config DEBUG_VIRTUAL
+	bool "Debug VM translations"
+	depends on DEBUG_KERNEL && ARCH_HAS_DEBUG_VIRTUAL
+	help
+	  Enable some costly sanity checks in virtual to page code. This can
+	  catch mistakes with virt_to_page() and friends.
+
+	  If unsure, say N.
+
+config DEBUG_NOMMU_REGIONS
+	bool "Debug the global anon/private NOMMU mapping region tree"
+	depends on DEBUG_KERNEL && !MMU
+	help
+	  This option causes the global tree of anonymous and private mapping
+	  regions to be regularly checked for invalid topology.
+
+config DEBUG_MEMORY_INIT
+	bool "Debug memory initialisation" if EXPERT
+	default !EXPERT
+	help
+	  Enable this for additional checks during memory initialisation.
+	  The sanity checks verify aspects of the VM such as the memory model
+	  and other information provided by the architecture. Verbose
+	  information will be printed at KERN_DEBUG loglevel depending
+	  on the mminit_loglevel= command-line option.
+
+	  If unsure, say Y
+
+config MEMORY_NOTIFIER_ERROR_INJECT
+	tristate "Memory hotplug notifier error injection module"
+	depends on MEMORY_HOTPLUG && NOTIFIER_ERROR_INJECTION
+	help
+	  This option provides the ability to inject artificial errors to
+	  memory hotplug notifier chain callbacks.  It is controlled through
+	  debugfs interface under /sys/kernel/debug/notifier-error-inject/memory
+
+	  If the notifier call chain should be failed with some events
+	  notified, write the error code to "actions/<notifier event>/error".
+
+	  Example: Inject memory hotplug offline error (-12 == -ENOMEM)
+
+	  # cd /sys/kernel/debug/notifier-error-inject/memory
+	  # echo -12 > actions/MEM_GOING_OFFLINE/error
+	  # echo offline > /sys/devices/system/memory/memoryXXX/state
+	  bash: echo: write error: Cannot allocate memory
+
+	  To compile this code as a module, choose M here: the module will
+	  be called memory-notifier-error-inject.
+
+	  If unsure, say N.
+
+config DEBUG_PER_CPU_MAPS
+	bool "Debug access to per_cpu maps"
+	depends on DEBUG_KERNEL
+	depends on SMP
+	help
+	  Say Y to verify that the per_cpu map being accessed has
+	  been set up. This adds a fair amount of code to kernel memory
+	  and decreases performance.
+
+	  Say N if unsure.
+
+config DEBUG_KMAP_LOCAL
+	bool "Debug kmap_local temporary mappings"
+	depends on DEBUG_KERNEL && KMAP_LOCAL
+	help
+	  This option enables additional error checking for the kmap_local
+	  infrastructure.  Disable for production use.
+
+config ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP
+	bool
+
+config DEBUG_KMAP_LOCAL_FORCE_MAP
+	bool "Enforce kmap_local temporary mappings"
+	depends on DEBUG_KERNEL && ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP
+	select KMAP_LOCAL
+	select DEBUG_KMAP_LOCAL
+	help
+	  This option enforces temporary mappings through the kmap_local
+	  mechanism for non-highmem pages and on non-highmem systems.
+	  Disable this for production systems!
+
+config DEBUG_HIGHMEM
+	bool "Highmem debugging"
+	depends on DEBUG_KERNEL && HIGHMEM
+	select DEBUG_KMAP_LOCAL_FORCE_MAP if ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP
+	select DEBUG_KMAP_LOCAL
+	help
+	  This option enables additional error checking for high memory
+	  systems.  Disable for production systems.
+
+config HAVE_DEBUG_STACKOVERFLOW
+	bool
+
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL && HAVE_DEBUG_STACKOVERFLOW
+	help
+	  Say Y here if you want to check for overflows of kernel, IRQ
+	  and exception stacks (if your architecture uses them). This
+	  option will show detailed messages if free stack space drops
+	  below a certain limit.
+
+	  These kinds of bugs usually occur when call-chains in the
+	  kernel get too deep, especially when interrupts are
+	  involved.
+
+	  Use this in cases where you see apparently random memory
+	  corruption, especially if it appears in 'struct thread_info'
+
+	  If in doubt, say "N".
+
+source "lib/Kconfig.kasan"
+source "lib/Kconfig.kfence"
+source "lib/Kconfig.kmsan"
+
+endmenu # "Memory Debugging"
+
+config DEBUG_SHIRQ
+	bool "Debug shared IRQ handlers"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to generate a spurious interrupt just before a shared
+	  interrupt handler is deregistered (generating one when registering
+	  is currently disabled). Drivers need to handle this correctly. Some
+	  don't and need to be caught.
+
+menu "Debug Oops, Lockups and Hangs"
+
+config PANIC_ON_OOPS
+	bool "Panic on Oops"
+	help
+	  Say Y here to enable the kernel to panic when it oopses. This
+	  has the same effect as setting oops=panic on the kernel command
+	  line.
+
+	  This feature is useful to ensure that the kernel does not do
+	  anything erroneous after an oops which could result in data
+	  corruption or other issues.
+
+	  Say N if unsure.
+
+config PANIC_ON_OOPS_VALUE
+	int
+	range 0 1
+	default 0 if !PANIC_ON_OOPS
+	default 1 if PANIC_ON_OOPS
+
+config PANIC_TIMEOUT
+	int "panic timeout"
+	default 0
+	help
+	  Set the timeout value (in seconds) until a reboot occurs when
+	  the kernel panics. If n = 0, then we wait forever. A timeout
+	  value n > 0 will wait n seconds before rebooting, while a timeout
+	  value n < 0 will reboot immediately.
+
+config LOCKUP_DETECTOR
+	bool
+
+config SOFTLOCKUP_DETECTOR
+	bool "Detect Soft Lockups"
+	depends on DEBUG_KERNEL && !S390
+	select LOCKUP_DETECTOR
+	help
+	  Say Y here to enable the kernel to act as a watchdog to detect
+	  soft lockups.
+
+	  Softlockups are bugs that cause the kernel to loop in kernel
+	  mode for more than 20 seconds, without giving other tasks a
+	  chance to run.  The current stack trace is displayed upon
+	  detection and the system will stay locked up.
+
+config BOOTPARAM_SOFTLOCKUP_PANIC
+	bool "Panic (Reboot) On Soft Lockups"
+	depends on SOFTLOCKUP_DETECTOR
+	help
+	  Say Y here to enable the kernel to panic on "soft lockups",
+	  which are bugs that cause the kernel to loop in kernel
+	  mode for more than 20 seconds (configurable using the watchdog_thresh
+	  sysctl), without giving other tasks a chance to run.
+
+	  The panic can be used in combination with panic_timeout,
+	  to cause the system to reboot automatically after a
+	  lockup has been detected. This feature is useful for
+	  high-availability systems that have uptime guarantees and
+	  where a lockup must be resolved ASAP.
+
+	  Say N if unsure.
+
+config HARDLOCKUP_DETECTOR_PERF
+	bool
+	select SOFTLOCKUP_DETECTOR
+
+#
+# Enables a timestamp based low pass filter to compensate for perf based
+# hard lockup detection which runs too fast due to turbo modes.
+#
+config HARDLOCKUP_CHECK_TIMESTAMP
+	bool
+
+#
+# arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
+# lockup detector rather than the perf based detector.
+#
+config HARDLOCKUP_DETECTOR
+	bool "Detect Hard Lockups"
+	depends on DEBUG_KERNEL && !S390
+	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH
+	select LOCKUP_DETECTOR
+	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF
+	help
+	  Say Y here to enable the kernel to act as a watchdog to detect
+	  hard lockups.
+
+	  Hardlockups are bugs that cause the CPU to loop in kernel mode
+	  for more than 10 seconds, without letting other interrupts have a
+	  chance to run.  The current stack trace is displayed upon detection
+	  and the system will stay locked up.
+
+config BOOTPARAM_HARDLOCKUP_PANIC
+	bool "Panic (Reboot) On Hard Lockups"
+	depends on HARDLOCKUP_DETECTOR
+	help
+	  Say Y here to enable the kernel to panic on "hard lockups",
+	  which are bugs that cause the kernel to loop in kernel
+	  mode with interrupts disabled for more than 10 seconds (configurable
+	  using the watchdog_thresh sysctl).
+
+	  Say N if unsure.
+
+config DETECT_HUNG_TASK
+	bool "Detect Hung Tasks"
+	depends on DEBUG_KERNEL
+	default SOFTLOCKUP_DETECTOR
+	help
+	  Say Y here to enable the kernel to detect "hung tasks",
+	  which are bugs that cause the task to be stuck in
+	  uninterruptible "D" state indefinitely.
+
+	  When a hung task is detected, the kernel will print the
+	  current stack trace (which you should report), but the
+	  task will stay in uninterruptible state. If lockdep is
+	  enabled then all held locks will also be reported. This
+	  feature has negligible overhead.
+
+config DEFAULT_HUNG_TASK_TIMEOUT
+	int "Default timeout for hung task detection (in seconds)"
+	depends on DETECT_HUNG_TASK
+	default 120
+	help
+	  This option controls the default timeout (in seconds) used
+	  to determine when a task has become non-responsive and should
+	  be considered hung.
+
+	  It can be adjusted at runtime via the kernel.hung_task_timeout_secs
+	  sysctl or by writing a value to
+	  /proc/sys/kernel/hung_task_timeout_secs.
+
+	  A timeout of 0 disables the check.  The default is two minutes.
+	  Keeping the default should be fine in most cases.
+
+config BOOTPARAM_HUNG_TASK_PANIC
+	bool "Panic (Reboot) On Hung Tasks"
+	depends on DETECT_HUNG_TASK
+	help
+	  Say Y here to enable the kernel to panic on "hung tasks",
+	  which are bugs that cause the kernel to leave a task stuck
+	  in uninterruptible "D" state.
+
+	  The panic can be used in combination with panic_timeout,
+	  to cause the system to reboot automatically after a
+	  hung task has been detected. This feature is useful for
+	  high-availability systems that have uptime guarantees and
+	  where a hung tasks must be resolved ASAP.
+
+	  Say N if unsure.
+
+config WQ_WATCHDOG
+	bool "Detect Workqueue Stalls"
+	depends on DEBUG_KERNEL
+	help
+	  Say Y here to enable stall detection on workqueues.  If a
+	  worker pool doesn't make forward progress on a pending work
+	  item for over a given amount of time, 30s by default, a
+	  warning message is printed along with dump of workqueue
+	  state.  This can be configured through kernel parameter
+	  "workqueue.watchdog_thresh" and its sysfs counterpart.
+
+config TEST_LOCKUP
+	tristate "Test module to generate lockups"
+	depends on m
+	help
+	  This builds the "test_lockup" module that helps to make sure
+	  that watchdogs and lockup detectors are working properly.
+
+	  Depending on module parameters it could emulate soft or hard
+	  lockup, "hung task", or locking arbitrary lock for a long time.
+	  Also it could generate series of lockups with cooling-down periods.
+
+	  If unsure, say N.
+
+endmenu # "Debug lockups and hangs"
+
+menu "Scheduler Debugging"
+
+config SCHED_DEBUG
+	bool "Collect scheduler debugging info"
+	depends on DEBUG_KERNEL && PROC_FS
+	default y
+	help
+	  If you say Y here, the /proc/sched_debug file will be provided
+	  that can help debug the scheduler. The runtime overhead of this
+	  option is minimal.
+
+config SCHED_INFO
+	bool
+	default n
+
+config SCHEDSTATS
+	bool "Collect scheduler statistics"
+	depends on DEBUG_KERNEL && PROC_FS
+	select SCHED_INFO
+	help
+	  If you say Y here, additional code will be inserted into the
+	  scheduler and related routines to collect statistics about
+	  scheduler behavior and provide them in /proc/schedstat.  These
+	  stats may be useful for both tuning and debugging the scheduler
+	  If you aren't debugging the scheduler or trying to tune a specific
+	  application, you can say N to avoid the very slight overhead
+	  this adds.
+
+endmenu
+
+config DEBUG_TIMEKEEPING
+	bool "Enable extra timekeeping sanity checking"
+	help
+	  This option will enable additional timekeeping sanity checks
+	  which may be helpful when diagnosing issues where timekeeping
+	  problems are suspected.
+
+	  This may include checks in the timekeeping hotpaths, so this
+	  option may have a (very small) performance impact to some
+	  workloads.
+
+	  If unsure, say N.
+
+config DEBUG_PREEMPT
+	bool "Debug preemptible kernel"
+	depends on DEBUG_KERNEL && PREEMPTION && TRACE_IRQFLAGS_SUPPORT
+	help
+	  If you say Y here then the kernel will use a debug variant of the
+	  commonly used smp_processor_id() function and will print warnings
+	  if kernel code uses it in a preemption-unsafe way. Also, the kernel
+	  will detect preemption count underflows.
+
+	  This option has potential to introduce high runtime overhead,
+	  depending on workload as it triggers debugging routines for each
+	  this_cpu operation. It should only be used for debugging purposes.
+
+menu "Lock Debugging (spinlocks, mutexes, etc...)"
+
+config LOCK_DEBUGGING_SUPPORT
+	bool
+	depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+	default y
+
+config PROVE_LOCKING
+	bool "Lock debugging: prove locking correctness"
+	depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+	select LOCKDEP
+	select DEBUG_SPINLOCK
+	select DEBUG_MUTEXES if !PREEMPT_RT
+	select DEBUG_RT_MUTEXES if RT_MUTEXES
+	select DEBUG_RWSEMS
+	select DEBUG_WW_MUTEX_SLOWPATH
+	select DEBUG_LOCK_ALLOC
+	select PREEMPT_COUNT if !ARCH_NO_PREEMPT
+	select TRACE_IRQFLAGS
+	default n
+	help
+	 This feature enables the kernel to prove that all locking
+	 that occurs in the kernel runtime is mathematically
+	 correct: that under no circumstance could an arbitrary (and
+	 not yet triggered) combination of observed locking
+	 sequences (on an arbitrary number of CPUs, running an
+	 arbitrary number of tasks and interrupt contexts) cause a
+	 deadlock.
+
+	 In short, this feature enables the kernel to report locking
+	 related deadlocks before they actually occur.
+
+	 The proof does not depend on how hard and complex a
+	 deadlock scenario would be to trigger: how many
+	 participant CPUs, tasks and irq-contexts would be needed
+	 for it to trigger. The proof also does not depend on
+	 timing: if a race and a resulting deadlock is possible
+	 theoretically (no matter how unlikely the race scenario
+	 is), it will be proven so and will immediately be
+	 reported by the kernel (once the event is observed that
+	 makes the deadlock theoretically possible).
+
+	 If a deadlock is impossible (i.e. the locking rules, as
+	 observed by the kernel, are mathematically correct), the
+	 kernel reports nothing.
+
+	 NOTE: this feature can also be enabled for rwlocks, mutexes
+	 and rwsems - in which case all dependencies between these
+	 different locking variants are observed and mapped too, and
+	 the proof of observed correctness is also maintained for an
+	 arbitrary combination of these separate locking variants.
+
+	 For more details, see Documentation/locking/lockdep-design.rst.
+
+config PROVE_RAW_LOCK_NESTING
+	bool "Enable raw_spinlock - spinlock nesting checks"
+	depends on PROVE_LOCKING
+	default n
+	help
+	 Enable the raw_spinlock vs. spinlock nesting checks which ensure
+	 that the lock nesting rules for PREEMPT_RT enabled kernels are
+	 not violated.
+
+	 NOTE: There are known nesting problems. So if you enable this
+	 option expect lockdep splats until these problems have been fully
+	 addressed which is work in progress. This config switch allows to
+	 identify and analyze these problems. It will be removed and the
+	 check permanently enabled once the main issues have been fixed.
+
+	 If unsure, select N.
+
+config LOCK_STAT
+	bool "Lock usage statistics"
+	depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+	select LOCKDEP
+	select DEBUG_SPINLOCK
+	select DEBUG_MUTEXES if !PREEMPT_RT
+	select DEBUG_RT_MUTEXES if RT_MUTEXES
+	select DEBUG_LOCK_ALLOC
+	default n
+	help
+	 This feature enables tracking lock contention points
+
+	 For more details, see Documentation/locking/lockstat.rst
+
+	 This also enables lock events required by "perf lock",
+	 subcommand of perf.
+	 If you want to use "perf lock", you also need to turn on
+	 CONFIG_EVENT_TRACING.
+
+	 CONFIG_LOCK_STAT defines "contended" and "acquired" lock events.
+	 (CONFIG_LOCKDEP defines "acquire" and "release" events.)
+
+config DEBUG_RT_MUTEXES
+	bool "RT Mutex debugging, deadlock detection"
+	depends on DEBUG_KERNEL && RT_MUTEXES
+	help
+	 This allows rt mutex semantics violations and rt mutex related
+	 deadlocks (lockups) to be detected and reported automatically.
+
+config DEBUG_SPINLOCK
+	bool "Spinlock and rw-lock debugging: basic checks"
+	depends on DEBUG_KERNEL
+	select UNINLINE_SPIN_UNLOCK
+	help
+	  Say Y here and build SMP to catch missing spinlock initialization
+	  and certain other kinds of spinlock errors commonly made.  This is
+	  best used in conjunction with the NMI watchdog so that spinlock
+	  deadlocks are also debuggable.
+
+config DEBUG_MUTEXES
+	bool "Mutex debugging: basic checks"
+	depends on DEBUG_KERNEL && !PREEMPT_RT
+	help
+	 This feature allows mutex semantics violations to be detected and
+	 reported.
+
+config DEBUG_WW_MUTEX_SLOWPATH
+	bool "Wait/wound mutex debugging: Slowpath testing"
+	depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+	select DEBUG_LOCK_ALLOC
+	select DEBUG_SPINLOCK
+	select DEBUG_MUTEXES if !PREEMPT_RT
+	select DEBUG_RT_MUTEXES if PREEMPT_RT
+	help
+	 This feature enables slowpath testing for w/w mutex users by
+	 injecting additional -EDEADLK wound/backoff cases. Together with
+	 the full mutex checks enabled with (CONFIG_PROVE_LOCKING) this
+	 will test all possible w/w mutex interface abuse with the
+	 exception of simply not acquiring all the required locks.
+	 Note that this feature can introduce significant overhead, so
+	 it really should not be enabled in a production or distro kernel,
+	 even a debug kernel.  If you are a driver writer, enable it.  If
+	 you are a distro, do not.
+
+config DEBUG_RWSEMS
+	bool "RW Semaphore debugging: basic checks"
+	depends on DEBUG_KERNEL
+	help
+	  This debugging feature allows mismatched rw semaphore locks
+	  and unlocks to be detected and reported.
+
+config DEBUG_LOCK_ALLOC
+	bool "Lock debugging: detect incorrect freeing of live locks"
+	depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+	select DEBUG_SPINLOCK
+	select DEBUG_MUTEXES if !PREEMPT_RT
+	select DEBUG_RT_MUTEXES if RT_MUTEXES
+	select LOCKDEP
+	help
+	 This feature will check whether any held lock (spinlock, rwlock,
+	 mutex or rwsem) is incorrectly freed by the kernel, via any of the
+	 memory-freeing routines (kfree(), kmem_cache_free(), free_pages(),
+	 vfree(), etc.), whether a live lock is incorrectly reinitialized via
+	 spin_lock_init()/mutex_init()/etc., or whether there is any lock
+	 held during task exit.
+
+config LOCKDEP
+	bool
+	depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
+	select STACKTRACE
+	select KALLSYMS
+	select KALLSYMS_ALL
+
+config LOCKDEP_SMALL
+	bool
+
+config LOCKDEP_BITS
+	int "Bitsize for MAX_LOCKDEP_ENTRIES"
+	depends on LOCKDEP && !LOCKDEP_SMALL
+	range 10 30
+	default 15
+	help
+	  Try increasing this value if you hit "BUG: MAX_LOCKDEP_ENTRIES too low!" message.
+
+config LOCKDEP_CHAINS_BITS
+	int "Bitsize for MAX_LOCKDEP_CHAINS"
+	depends on LOCKDEP && !LOCKDEP_SMALL
+	range 10 30
+	default 16
+	help
+	  Try increasing this value if you hit "BUG: MAX_LOCKDEP_CHAINS too low!" message.
+
+config LOCKDEP_STACK_TRACE_BITS
+	int "Bitsize for MAX_STACK_TRACE_ENTRIES"
+	depends on LOCKDEP && !LOCKDEP_SMALL
+	range 10 30
+	default 19
+	help
+	  Try increasing this value if you hit "BUG: MAX_STACK_TRACE_ENTRIES too low!" message.
+
+config LOCKDEP_STACK_TRACE_HASH_BITS
+	int "Bitsize for STACK_TRACE_HASH_SIZE"
+	depends on LOCKDEP && !LOCKDEP_SMALL
+	range 10 30
+	default 14
+	help
+	  Try increasing this value if you need large MAX_STACK_TRACE_ENTRIES.
+
+config LOCKDEP_CIRCULAR_QUEUE_BITS
+	int "Bitsize for elements in circular_queue struct"
+	depends on LOCKDEP
+	range 10 30
+	default 12
+	help
+	  Try increasing this value if you hit "lockdep bfs error:-1" warning due to __cq_enqueue() failure.
+
+config DEBUG_LOCKDEP
+	bool "Lock dependency engine debugging"
+	depends on DEBUG_KERNEL && LOCKDEP
+	select DEBUG_IRQFLAGS
+	help
+	  If you say Y here, the lock dependency engine will do
+	  additional runtime checks to debug itself, at the price
+	  of more runtime overhead.
+
+config DEBUG_ATOMIC_SLEEP
+	bool "Sleep inside atomic section checking"
+	select PREEMPT_COUNT
+	depends on DEBUG_KERNEL
+	depends on !ARCH_NO_PREEMPT
+	help
+	  If you say Y here, various routines which may sleep will become very
+	  noisy if they are called inside atomic sections: when a spinlock is
+	  held, inside an rcu read side critical section, inside preempt disabled
+	  sections, inside an interrupt, etc...
+
+config DEBUG_LOCKING_API_SELFTESTS
+	bool "Locking API boot-time self-tests"
+	depends on DEBUG_KERNEL
+	help
+	  Say Y here if you want the kernel to run a short self-test during
+	  bootup. The self-test checks whether common types of locking bugs
+	  are detected by debugging mechanisms or not. (if you disable
+	  lock debugging then those bugs won't be detected of course.)
+	  The following locking APIs are covered: spinlocks, rwlocks,
+	  mutexes and rwsems.
+
+config LOCK_TORTURE_TEST
+	tristate "torture tests for locking"
+	depends on DEBUG_KERNEL
+	select TORTURE_TEST
+	help
+	  This option provides a kernel module that runs torture tests
+	  on kernel locking primitives.  The kernel module may be built
+	  after the fact on the running kernel to be tested, if desired.
+
+	  Say Y here if you want kernel locking-primitive torture tests
+	  to be built into the kernel.
+	  Say M if you want these torture tests to build as a module.
+	  Say N if you are unsure.
+
+config WW_MUTEX_SELFTEST
+	tristate "Wait/wound mutex selftests"
+	help
+	  This option provides a kernel module that runs tests on the
+	  on the struct ww_mutex locking API.
+
+	  It is recommended to enable DEBUG_WW_MUTEX_SLOWPATH in conjunction
+	  with this test harness.
+
+	  Say M if you want these self tests to build as a module.
+	  Say N if you are unsure.
+
+config SCF_TORTURE_TEST
+	tristate "torture tests for smp_call_function*()"
+	depends on DEBUG_KERNEL
+	select TORTURE_TEST
+	help
+	  This option provides a kernel module that runs torture tests
+	  on the smp_call_function() family of primitives.  The kernel
+	  module may be built after the fact on the running kernel to
+	  be tested, if desired.
+
+config CSD_LOCK_WAIT_DEBUG
+	bool "Debugging for csd_lock_wait(), called from smp_call_function*()"
+	depends on DEBUG_KERNEL
+	depends on 64BIT
+	default n
+	help
+	  This option enables debug prints when CPUs are slow to respond
+	  to the smp_call_function*() IPI wrappers.  These debug prints
+	  include the IPI handler function currently executing (if any)
+	  and relevant stack traces.
+
+endmenu # lock debugging
+
+config TRACE_IRQFLAGS
+	depends on TRACE_IRQFLAGS_SUPPORT
+	bool
+	help
+	  Enables hooks to interrupt enabling and disabling for
+	  either tracing or lock debugging.
+
+config TRACE_IRQFLAGS_NMI
+	def_bool y
+	depends on TRACE_IRQFLAGS
+	depends on TRACE_IRQFLAGS_NMI_SUPPORT
+
+config DEBUG_IRQFLAGS
+	bool "Debug IRQ flag manipulation"
+	help
+	  Enables checks for potentially unsafe enabling or disabling of
+	  interrupts, such as calling raw_local_irq_restore() when interrupts
+	  are enabled.
+
+config STACKTRACE
+	bool "Stack backtrace support"
+	depends on STACKTRACE_SUPPORT
+	help
+	  This option causes the kernel to create a /proc/pid/stack for
+	  every process, showing its current stack trace.
+	  It is also used by various kernel debugging features that require
+	  stack trace generation.
+
+config WARN_ALL_UNSEEDED_RANDOM
+	bool "Warn for all uses of unseeded randomness"
+	default n
+	help
+	  Some parts of the kernel contain bugs relating to their use of
+	  cryptographically secure random numbers before it's actually possible
+	  to generate those numbers securely. This setting ensures that these
+	  flaws don't go unnoticed, by enabling a message, should this ever
+	  occur. This will allow people with obscure setups to know when things
+	  are going wrong, so that they might contact developers about fixing
+	  it.
+
+	  Unfortunately, on some models of some architectures getting
+	  a fully seeded CRNG is extremely difficult, and so this can
+	  result in dmesg getting spammed for a surprisingly long
+	  time.  This is really bad from a security perspective, and
+	  so architecture maintainers really need to do what they can
+	  to get the CRNG seeded sooner after the system is booted.
+	  However, since users cannot do anything actionable to
+	  address this, by default this option is disabled.
+
+	  Say Y here if you want to receive warnings for all uses of
+	  unseeded randomness.  This will be of use primarily for
+	  those developers interested in improving the security of
+	  Linux kernels running on their architecture (or
+	  subarchitecture).
+
+config DEBUG_KOBJECT
+	bool "kobject debugging"
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here, some extra kobject debugging messages will be sent
+	  to the syslog.
+
+config DEBUG_KOBJECT_RELEASE
+	bool "kobject release debugging"
+	depends on DEBUG_OBJECTS_TIMERS
+	help
+	  kobjects are reference counted objects.  This means that their
+	  last reference count put is not predictable, and the kobject can
+	  live on past the point at which a driver decides to drop its
+	  initial reference to the kobject gained on allocation.  An
+	  example of this would be a struct device which has just been
+	  unregistered.
+
+	  However, some buggy drivers assume that after such an operation,
+	  the memory backing the kobject can be immediately freed.  This
+	  goes completely against the principles of a refcounted object.
+
+	  If you say Y here, the kernel will delay the release of kobjects
+	  on the last reference count to improve the visibility of this
+	  kind of kobject release bug.
+
+config HAVE_DEBUG_BUGVERBOSE
+	bool
+
+menu "Debug kernel data structures"
+
+config DEBUG_LIST
+	bool "Debug linked list manipulation"
+	depends on DEBUG_KERNEL || BUG_ON_DATA_CORRUPTION
+	help
+	  Enable this to turn on extended checks in the linked-list
+	  walking routines.
+
+	  If unsure, say N.
+
+config DEBUG_PLIST
+	bool "Debug priority linked list manipulation"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to turn on extended checks in the priority-ordered
+	  linked-list (plist) walking routines.  This checks the entire
+	  list multiple times during each manipulation.
+
+	  If unsure, say N.
+
+config DEBUG_SG
+	bool "Debug SG table operations"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to turn on checks on scatter-gather tables. This can
+	  help find problems with drivers that do not properly initialize
+	  their sg tables.
+
+	  If unsure, say N.
+
+config DEBUG_NOTIFIERS
+	bool "Debug notifier call chains"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to turn on sanity checking for notifier call chains.
+	  This is most useful for kernel developers to make sure that
+	  modules properly unregister themselves from notifier chains.
+	  This is a relatively cheap check but if you care about maximum
+	  performance, say N.
+
+config BUG_ON_DATA_CORRUPTION
+	bool "Trigger a BUG when data corruption is detected"
+	select DEBUG_LIST
+	help
+	  Select this option if the kernel should BUG when it encounters
+	  data corruption in kernel memory structures when they get checked
+	  for validity.
+
+	  If unsure, say N.
+
+config DEBUG_MAPLE_TREE
+	bool "Debug maple trees"
+	depends on DEBUG_KERNEL
+	help
+	  Enable maple tree debugging information and extra validations.
+
+	  If unsure, say N.
+
+endmenu
+
+config DEBUG_CREDENTIALS
+	bool "Debug credential management"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to turn on some debug checking for credential
+	  management.  The additional code keeps track of the number of
+	  pointers from task_structs to any given cred struct, and checks to
+	  see that this number never exceeds the usage count of the cred
+	  struct.
+
+	  Furthermore, if SELinux is enabled, this also checks that the
+	  security pointer in the cred struct is never seen to be invalid.
+
+	  If unsure, say N.
+
+source "kernel/rcu/Kconfig.debug"
+
+config DEBUG_WQ_FORCE_RR_CPU
+	bool "Force round-robin CPU selection for unbound work items"
+	depends on DEBUG_KERNEL
+	default n
+	help
+	  Workqueue used to implicitly guarantee that work items queued
+	  without explicit CPU specified are put on the local CPU.  This
+	  guarantee is no longer true and while local CPU is still
+	  preferred work items may be put on foreign CPUs.  Kernel
+	  parameter "workqueue.debug_force_rr_cpu" is added to force
+	  round-robin CPU selection to flush out usages which depend on the
+	  now broken guarantee.  This config option enables the debug
+	  feature by default.  When enabled, memory and cache locality will
+	  be impacted.
+
+config CPU_HOTPLUG_STATE_CONTROL
+	bool "Enable CPU hotplug state control"
+	depends on DEBUG_KERNEL
+	depends on HOTPLUG_CPU
+	default n
+	help
+	  Allows to write steps between "offline" and "online" to the CPUs
+	  sysfs target file so states can be stepped granular. This is a debug
+	  option for now as the hotplug machinery cannot be stopped and
+	  restarted at arbitrary points yet.
+
+	  Say N if your are unsure.
+
+config LATENCYTOP
+	bool "Latency measuring infrastructure"
+	depends on DEBUG_KERNEL
+	depends on STACKTRACE_SUPPORT
+	depends on PROC_FS
+	depends on FRAME_POINTER || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86
+	select KALLSYMS
+	select KALLSYMS_ALL
+	select STACKTRACE
+	select SCHEDSTATS
+	help
+	  Enable this option if you want to use the LatencyTOP tool
+	  to find out which userspace is blocking on what kernel operations.
+
+source "kernel/trace/Kconfig"
+
+config PROVIDE_OHCI1394_DMA_INIT
+	bool "Remote debugging over FireWire early on boot"
+	depends on PCI && X86
+	help
+	  If you want to debug problems which hang or crash the kernel early
+	  on boot and the crashing machine has a FireWire port, you can use
+	  this feature to remotely access the memory of the crashed machine
+	  over FireWire. This employs remote DMA as part of the OHCI1394
+	  specification which is now the standard for FireWire controllers.
+
+	  With remote DMA, you can monitor the printk buffer remotely using
+	  firescope and access all memory below 4GB using fireproxy from gdb.
+	  Even controlling a kernel debugger is possible using remote DMA.
+
+	  Usage:
+
+	  If ohci1394_dma=early is used as boot parameter, it will initialize
+	  all OHCI1394 controllers which are found in the PCI config space.
+
+	  As all changes to the FireWire bus such as enabling and disabling
+	  devices cause a bus reset and thereby disable remote DMA for all
+	  devices, be sure to have the cable plugged and FireWire enabled on
+	  the debugging host before booting the debug target for debugging.
+
+	  This code (~1k) is freed after boot. By then, the firewire stack
+	  in charge of the OHCI-1394 controllers should be used instead.
+
+	  See Documentation/core-api/debugging-via-ohci1394.rst for more information.
+
+source "samples/Kconfig"
+
+config ARCH_HAS_DEVMEM_IS_ALLOWED
+	bool
+
+config STRICT_DEVMEM
+	bool "Filter access to /dev/mem"
+	depends on MMU && DEVMEM
+	depends on ARCH_HAS_DEVMEM_IS_ALLOWED || GENERIC_LIB_DEVMEM_IS_ALLOWED
+	default y if PPC || X86 || ARM64
+	help
+	  If this option is disabled, you allow userspace (root) access to all
+	  of memory, including kernel and userspace memory. Accidental
+	  access to this is obviously disastrous, but specific access can
+	  be used by people debugging the kernel. Note that with PAT support
+	  enabled, even in this case there are restrictions on /dev/mem
+	  use due to the cache aliasing requirements.
+
+	  If this option is switched on, and IO_STRICT_DEVMEM=n, the /dev/mem
+	  file only allows userspace access to PCI space and the BIOS code and
+	  data regions.  This is sufficient for dosemu and X and all common
+	  users of /dev/mem.
+
+	  If in doubt, say Y.
+
+config IO_STRICT_DEVMEM
+	bool "Filter I/O access to /dev/mem"
+	depends on STRICT_DEVMEM
+	help
+	  If this option is disabled, you allow userspace (root) access to all
+	  io-memory regardless of whether a driver is actively using that
+	  range.  Accidental access to this is obviously disastrous, but
+	  specific access can be used by people debugging kernel drivers.
+
+	  If this option is switched on, the /dev/mem file only allows
+	  userspace access to *idle* io-memory ranges (see /proc/iomem) This
+	  may break traditional users of /dev/mem (dosemu, legacy X, etc...)
+	  if the driver using a given range cannot be disabled.
+
+	  If in doubt, say Y.
+
+menu "$(SRCARCH) Debugging"
+
+source "arch/$(SRCARCH)/Kconfig.debug"
+
+endmenu
+
+menu "Kernel Testing and Coverage"
+
+source "lib/kunit/Kconfig"
+
+config NOTIFIER_ERROR_INJECTION
+	tristate "Notifier error injection"
+	depends on DEBUG_KERNEL
+	select DEBUG_FS
+	help
+	  This option provides the ability to inject artificial errors to
+	  specified notifier chain callbacks. It is useful to test the error
+	  handling of notifier call chain failures.
+
+	  Say N if unsure.
+
+config PM_NOTIFIER_ERROR_INJECT
+	tristate "PM notifier error injection module"
+	depends on PM && NOTIFIER_ERROR_INJECTION
+	default m if PM_DEBUG
+	help
+	  This option provides the ability to inject artificial errors to
+	  PM notifier chain callbacks.  It is controlled through debugfs
+	  interface /sys/kernel/debug/notifier-error-inject/pm
+
+	  If the notifier call chain should be failed with some events
+	  notified, write the error code to "actions/<notifier event>/error".
+
+	  Example: Inject PM suspend error (-12 = -ENOMEM)
+
+	  # cd /sys/kernel/debug/notifier-error-inject/pm/
+	  # echo -12 > actions/PM_SUSPEND_PREPARE/error
+	  # echo mem > /sys/power/state
+	  bash: echo: write error: Cannot allocate memory
+
+	  To compile this code as a module, choose M here: the module will
+	  be called pm-notifier-error-inject.
+
+	  If unsure, say N.
+
+config OF_RECONFIG_NOTIFIER_ERROR_INJECT
+	tristate "OF reconfig notifier error injection module"
+	depends on OF_DYNAMIC && NOTIFIER_ERROR_INJECTION
+	help
+	  This option provides the ability to inject artificial errors to
+	  OF reconfig notifier chain callbacks.  It is controlled
+	  through debugfs interface under
+	  /sys/kernel/debug/notifier-error-inject/OF-reconfig/
+
+	  If the notifier call chain should be failed with some events
+	  notified, write the error code to "actions/<notifier event>/error".
+
+	  To compile this code as a module, choose M here: the module will
+	  be called of-reconfig-notifier-error-inject.
+
+	  If unsure, say N.
+
+config NETDEV_NOTIFIER_ERROR_INJECT
+	tristate "Netdev notifier error injection module"
+	depends on NET && NOTIFIER_ERROR_INJECTION
+	help
+	  This option provides the ability to inject artificial errors to
+	  netdevice notifier chain callbacks.  It is controlled through debugfs
+	  interface /sys/kernel/debug/notifier-error-inject/netdev
+
+	  If the notifier call chain should be failed with some events
+	  notified, write the error code to "actions/<notifier event>/error".
+
+	  Example: Inject netdevice mtu change error (-22 = -EINVAL)
+
+	  # cd /sys/kernel/debug/notifier-error-inject/netdev
+	  # echo -22 > actions/NETDEV_CHANGEMTU/error
+	  # ip link set eth0 mtu 1024
+	  RTNETLINK answers: Invalid argument
+
+	  To compile this code as a module, choose M here: the module will
+	  be called netdev-notifier-error-inject.
+
+	  If unsure, say N.
+
+config FUNCTION_ERROR_INJECTION
+	bool "Fault-injections of functions"
+	depends on HAVE_FUNCTION_ERROR_INJECTION && KPROBES
+	help
+	  Add fault injections into various functions that are annotated with
+	  ALLOW_ERROR_INJECTION() in the kernel. BPF may also modify the return
+	  value of theses functions. This is useful to test error paths of code.
+
+	  If unsure, say N
+
+config FAULT_INJECTION
+	bool "Fault-injection framework"
+	depends on DEBUG_KERNEL
+	help
+	  Provide fault-injection framework.
+	  For more details, see Documentation/fault-injection/.
+
+config FAILSLAB
+	bool "Fault-injection capability for kmalloc"
+	depends on FAULT_INJECTION
+	depends on SLAB || SLUB
+	help
+	  Provide fault-injection capability for kmalloc.
+
+config FAIL_PAGE_ALLOC
+	bool "Fault-injection capability for alloc_pages()"
+	depends on FAULT_INJECTION
+	help
+	  Provide fault-injection capability for alloc_pages().
+
+config FAULT_INJECTION_USERCOPY
+	bool "Fault injection capability for usercopy functions"
+	depends on FAULT_INJECTION
+	help
+	  Provides fault-injection capability to inject failures
+	  in usercopy functions (copy_from_user(), get_user(), ...).
+
+config FAIL_MAKE_REQUEST
+	bool "Fault-injection capability for disk IO"
+	depends on FAULT_INJECTION && BLOCK
+	help
+	  Provide fault-injection capability for disk IO.
+
+config FAIL_IO_TIMEOUT
+	bool "Fault-injection capability for faking disk interrupts"
+	depends on FAULT_INJECTION && BLOCK
+	help
+	  Provide fault-injection capability on end IO handling. This
+	  will make the block layer "forget" an interrupt as configured,
+	  thus exercising the error handling.
+
+	  Only works with drivers that use the generic timeout handling,
+	  for others it won't do anything.
+
+config FAIL_FUTEX
+	bool "Fault-injection capability for futexes"
+	select DEBUG_FS
+	depends on FAULT_INJECTION && FUTEX
+	help
+	  Provide fault-injection capability for futexes.
+
+config FAULT_INJECTION_DEBUG_FS
+	bool "Debugfs entries for fault-injection capabilities"
+	depends on FAULT_INJECTION && SYSFS && DEBUG_FS
+	help
+	  Enable configuration of fault-injection capabilities via debugfs.
+
+config FAIL_FUNCTION
+	bool "Fault-injection capability for functions"
+	depends on FAULT_INJECTION_DEBUG_FS && FUNCTION_ERROR_INJECTION
+	help
+	  Provide function-based fault-injection capability.
+	  This will allow you to override a specific function with a return
+	  with given return value. As a result, function caller will see
+	  an error value and have to handle it. This is useful to test the
+	  error handling in various subsystems.
+
+config FAIL_MMC_REQUEST
+	bool "Fault-injection capability for MMC IO"
+	depends on FAULT_INJECTION_DEBUG_FS && MMC
+	help
+	  Provide fault-injection capability for MMC IO.
+	  This will make the mmc core return data errors. This is
+	  useful to test the error handling in the mmc block device
+	  and to test how the mmc host driver handles retries from
+	  the block device.
+
+config FAIL_SUNRPC
+	bool "Fault-injection capability for SunRPC"
+	depends on FAULT_INJECTION_DEBUG_FS && SUNRPC_DEBUG
+	help
+	  Provide fault-injection capability for SunRPC and
+	  its consumers.
+
+config FAULT_INJECTION_STACKTRACE_FILTER
+	bool "stacktrace filter for fault-injection capabilities"
+	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
+	depends on !X86_64
+	select STACKTRACE
+	depends on FRAME_POINTER || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86
+	help
+	  Provide stacktrace filter for fault-injection capabilities
+
+config ARCH_HAS_KCOV
+	bool
+	help
+	  An architecture should select this when it can successfully
+	  build and run with CONFIG_KCOV. This typically requires
+	  disabling instrumentation for some early boot code.
+
+config CC_HAS_SANCOV_TRACE_PC
+	def_bool $(cc-option,-fsanitize-coverage=trace-pc)
+
+
+config KCOV
+	bool "Code coverage for fuzzing"
+	depends on ARCH_HAS_KCOV
+	depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
+	depends on !ARCH_WANTS_NO_INSTR || HAVE_NOINSTR_HACK || \
+		   GCC_VERSION >= 120000 || CLANG_VERSION >= 130000
+	select DEBUG_FS
+	select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
+	select OBJTOOL if HAVE_NOINSTR_HACK
+	help
+	  KCOV exposes kernel code coverage information in a form suitable
+	  for coverage-guided fuzzing (randomized testing).
+
+	  If RANDOMIZE_BASE is enabled, PC values will not be stable across
+	  different machines and across reboots. If you need stable PC values,
+	  disable RANDOMIZE_BASE.
+
+	  For more details, see Documentation/dev-tools/kcov.rst.
+
+config KCOV_ENABLE_COMPARISONS
+	bool "Enable comparison operands collection by KCOV"
+	depends on KCOV
+	depends on $(cc-option,-fsanitize-coverage=trace-cmp)
+	help
+	  KCOV also exposes operands of every comparison in the instrumented
+	  code along with operand sizes and PCs of the comparison instructions.
+	  These operands can be used by fuzzing engines to improve the quality
+	  of fuzzing coverage.
+
+config KCOV_INSTRUMENT_ALL
+	bool "Instrument all code by default"
+	depends on KCOV
+	default y
+	help
+	  If you are doing generic system call fuzzing (like e.g. syzkaller),
+	  then you will want to instrument the whole kernel and you should
+	  say y here. If you are doing more targeted fuzzing (like e.g.
+	  filesystem fuzzing with AFL) then you will want to enable coverage
+	  for more specific subsets of files, and should say n here.
+
+config KCOV_IRQ_AREA_SIZE
+	hex "Size of interrupt coverage collection area in words"
+	depends on KCOV
+	default 0x40000
+	help
+	  KCOV uses preallocated per-cpu areas to collect coverage from
+	  soft interrupts. This specifies the size of those areas in the
+	  number of unsigned long words.
+
+menuconfig RUNTIME_TESTING_MENU
+	bool "Runtime Testing"
+	def_bool y
+
+if RUNTIME_TESTING_MENU
+
+config LKDTM
+	tristate "Linux Kernel Dump Test Tool Module"
+	depends on DEBUG_FS
+	help
+	This module enables testing of the different dumping mechanisms by
+	inducing system failures at predefined crash points.
+	If you don't need it: say N
+	Choose M here to compile this code as a module. The module will be
+	called lkdtm.
+
+	Documentation on how to use the module can be found in
+	Documentation/fault-injection/provoke-crashes.rst
+
+config CPUMASK_KUNIT_TEST
+	tristate "KUnit test for cpumask" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Enable to turn on cpumask tests, running at boot or module load time.
+
+	  For more information on KUnit and unit tests in general, please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config TEST_LIST_SORT
+	tristate "Linked list sorting test" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Enable this to turn on 'list_sort()' function test. This test is
+	  executed only once during system boot (so affects only boot time),
+	  or at module load time.
+
+	  If unsure, say N.
+
+config TEST_MIN_HEAP
+	tristate "Min heap test"
+	depends on DEBUG_KERNEL || m
+	help
+	  Enable this to turn on min heap function tests. This test is
+	  executed only once during system boot (so affects only boot time),
+	  or at module load time.
+
+	  If unsure, say N.
+
+config TEST_SORT
+	tristate "Array-based sort test" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+	default KUNIT_ALL_TESTS
+	help
+	  This option enables the self-test function of 'sort()' at boot,
+	  or at module load time.
+
+	  If unsure, say N.
+
+config TEST_DIV64
+	tristate "64bit/32bit division and modulo test"
+	depends on DEBUG_KERNEL || m
+	help
+	  Enable this to turn on 'do_div()' function test. This test is
+	  executed only once during system boot (so affects only boot time),
+	  or at module load time.
+
+	  If unsure, say N.
+
+config KPROBES_SANITY_TEST
+	tristate "Kprobes sanity tests" if !KUNIT_ALL_TESTS
+	depends on DEBUG_KERNEL
+	depends on KPROBES
+	depends on KUNIT
+	select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+	default KUNIT_ALL_TESTS
+	help
+	  This option provides for testing basic kprobes functionality on
+	  boot. Samples of kprobe and kretprobe are inserted and
+	  verified for functionality.
+
+	  Say N if you are unsure.
+
+config FPROBE_SANITY_TEST
+	bool "Self test for fprobe"
+	depends on DEBUG_KERNEL
+	depends on FPROBE
+	depends on KUNIT=y
+	help
+	  This option will enable testing the fprobe when the system boot.
+	  A series of tests are made to verify that the fprobe is functioning
+	  properly.
+
+	  Say N if you are unsure.
+
+config BACKTRACE_SELF_TEST
+	tristate "Self test for the backtrace code"
+	depends on DEBUG_KERNEL
+	help
+	  This option provides a kernel module that can be used to test
+	  the kernel stack backtrace code. This option is not useful
+	  for distributions or general kernels, but only for kernel
+	  developers working on architecture code.
+
+	  Note that if you want to also test saved backtraces, you will
+	  have to enable STACKTRACE as well.
+
+	  Say N if you are unsure.
+
+config TEST_REF_TRACKER
+	tristate "Self test for reference tracker"
+	depends on DEBUG_KERNEL && STACKTRACE_SUPPORT
+	select REF_TRACKER
+	help
+	  This option provides a kernel module performing tests
+	  using reference tracker infrastructure.
+
+	  Say N if you are unsure.
+
+config RBTREE_TEST
+	tristate "Red-Black tree test"
+	depends on DEBUG_KERNEL
+	help
+	  A benchmark measuring the performance of the rbtree library.
+	  Also includes rbtree invariant checks.
+
+config REED_SOLOMON_TEST
+	tristate "Reed-Solomon library test"
+	depends on DEBUG_KERNEL || m
+	select REED_SOLOMON
+	select REED_SOLOMON_ENC16
+	select REED_SOLOMON_DEC16
+	help
+	  This option enables the self-test function of rslib at boot,
+	  or at module load time.
+
+	  If unsure, say N.
+
+config INTERVAL_TREE_TEST
+	tristate "Interval tree test"
+	depends on DEBUG_KERNEL
+	select INTERVAL_TREE
+	help
+	  A benchmark measuring the performance of the interval tree library
+
+config PERCPU_TEST
+	tristate "Per cpu operations test"
+	depends on m && DEBUG_KERNEL
+	help
+	  Enable this option to build test module which validates per-cpu
+	  operations.
+
+	  If unsure, say N.
+
+config ATOMIC64_SELFTEST
+	tristate "Perform an atomic64_t self-test"
+	help
+	  Enable this option to test the atomic64_t functions at boot or
+	  at module load time.
+
+	  If unsure, say N.
+
+config ASYNC_RAID6_TEST
+	tristate "Self test for hardware accelerated raid6 recovery"
+	depends on ASYNC_RAID6_RECOV
+	select ASYNC_MEMCPY
+	help
+	  This is a one-shot self test that permutes through the
+	  recovery of all the possible two disk failure scenarios for a
+	  N-disk array.  Recovery is performed with the asynchronous
+	  raid6 recovery routines, and will optionally use an offload
+	  engine if one is available.
+
+	  If unsure, say N.
+
+config TEST_HEXDUMP
+	tristate "Test functions located in the hexdump module at runtime"
+
+config STRING_SELFTEST
+	tristate "Test string functions at runtime"
+
+config TEST_STRING_HELPERS
+	tristate "Test functions located in the string_helpers module at runtime"
+
+config TEST_STRSCPY
+	tristate "Test strscpy*() family of functions at runtime"
+
+config TEST_KSTRTOX
+	tristate "Test kstrto*() family of functions at runtime"
+
+config TEST_PRINTF
+	tristate "Test printf() family of functions at runtime"
+
+config TEST_SCANF
+	tristate "Test scanf() family of functions at runtime"
+
+config TEST_BITMAP
+	tristate "Test bitmap_*() family of functions at runtime"
+	help
+	  Enable this option to test the bitmap functions at boot.
+
+	  If unsure, say N.
+
+config TEST_UUID
+	tristate "Test functions located in the uuid module at runtime"
+
+config TEST_XARRAY
+	tristate "Test the XArray code at runtime"
+
+config TEST_MAPLE_TREE
+	select DEBUG_MAPLE_TREE
+	tristate "Test the Maple Tree code at runtime"
+
+config TEST_RHASHTABLE
+	tristate "Perform selftest on resizable hash table"
+	help
+	  Enable this option to test the rhashtable functions at boot.
+
+	  If unsure, say N.
+
+config TEST_SIPHASH
+	tristate "Perform selftest on siphash functions"
+	help
+	  Enable this option to test the kernel's siphash (<linux/siphash.h>) hash
+	  functions on boot (or module load).
+
+	  This is intended to help people writing architecture-specific
+	  optimized versions.  If unsure, say N.
+
+config TEST_IDA
+	tristate "Perform selftest on IDA functions"
+
+config TEST_PARMAN
+	tristate "Perform selftest on priority array manager"
+	depends on PARMAN
+	help
+	  Enable this option to test priority array manager on boot
+	  (or module load).
+
+	  If unsure, say N.
+
+config TEST_IRQ_TIMINGS
+	bool "IRQ timings selftest"
+	depends on IRQ_TIMINGS
+	help
+	  Enable this option to test the irq timings code on boot.
+
+	  If unsure, say N.
+
+config TEST_LKM
+	tristate "Test module loading with 'hello world' module"
+	depends on m
+	help
+	  This builds the "test_module" module that emits "Hello, world"
+	  on printk when loaded. It is designed to be used for basic
+	  evaluation of the module loading subsystem (for example when
+	  validating module verification). It lacks any extra dependencies,
+	  and will not normally be loaded by the system unless explicitly
+	  requested by name.
+
+	  If unsure, say N.
+
+config TEST_BITOPS
+	tristate "Test module for compilation of bitops operations"
+	depends on m
+	help
+	  This builds the "test_bitops" module that is much like the
+	  TEST_LKM module except that it does a basic exercise of the
+	  set/clear_bit macros and get_count_order/long to make sure there are
+	  no compiler warnings from C=1 sparse checker or -Wextra
+	  compilations. It has no dependencies and doesn't run or load unless
+	  explicitly requested by name.  for example: modprobe test_bitops.
+
+	  If unsure, say N.
+
+config TEST_VMALLOC
+	tristate "Test module for stress/performance analysis of vmalloc allocator"
+	default n
+       depends on MMU
+	depends on m
+	help
+	  This builds the "test_vmalloc" module that should be used for
+	  stress and performance analysis. So, any new change for vmalloc
+	  subsystem can be evaluated from performance and stability point
+	  of view.
+
+	  If unsure, say N.
+
+config TEST_USER_COPY
+	tristate "Test user/kernel boundary protections"
+	depends on m
+	help
+	  This builds the "test_user_copy" module that runs sanity checks
+	  on the copy_to/from_user infrastructure, making sure basic
+	  user/kernel boundary testing is working. If it fails to load,
+	  a regression has been detected in the user/kernel memory boundary
+	  protections.
+
+	  If unsure, say N.
+
+config TEST_BPF
+	tristate "Test BPF filter functionality"
+	depends on m && NET
+	help
+	  This builds the "test_bpf" module that runs various test vectors
+	  against the BPF interpreter or BPF JIT compiler depending on the
+	  current setting. This is in particular useful for BPF JIT compiler
+	  development, but also to run regression tests against changes in
+	  the interpreter code. It also enables test stubs for eBPF maps and
+	  verifier used by user space verifier testsuite.
+
+	  If unsure, say N.
+
+config TEST_BLACKHOLE_DEV
+	tristate "Test blackhole netdev functionality"
+	depends on m && NET
+	help
+	  This builds the "test_blackhole_dev" module that validates the
+	  data path through this blackhole netdev.
+
+	  If unsure, say N.
+
+config FIND_BIT_BENCHMARK
+	tristate "Test find_bit functions"
+	help
+	  This builds the "test_find_bit" module that measure find_*_bit()
+	  functions performance.
+
+	  If unsure, say N.
+
+config TEST_FIRMWARE
+	tristate "Test firmware loading via userspace interface"
+	depends on FW_LOADER
+	help
+	  This builds the "test_firmware" module that creates a userspace
+	  interface for testing firmware loading. This can be used to
+	  control the triggering of firmware loading without needing an
+	  actual firmware-using device. The contents can be rechecked by
+	  userspace.
+
+	  If unsure, say N.
+
+config TEST_SYSCTL
+	tristate "sysctl test driver"
+	depends on PROC_SYSCTL
+	help
+	  This builds the "test_sysctl" module. This driver enables to test the
+	  proc sysctl interfaces available to drivers safely without affecting
+	  production knobs which might alter system functionality.
+
+	  If unsure, say N.
+
+config BITFIELD_KUNIT
+	tristate "KUnit test bitfield functions at runtime" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Enable this option to test the bitfield functions at boot.
+
+	  KUnit tests run during boot and output the results to the debug log
+	  in TAP format (http://testanything.org/). Only useful for kernel devs
+	  running the KUnit test harness, and not intended for inclusion into a
+	  production build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config HASH_KUNIT_TEST
+	tristate "KUnit Test for integer hash functions" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Enable this option to test the kernel's string (<linux/stringhash.h>), and
+	  integer (<linux/hash.h>) hash functions on boot.
+
+	  KUnit tests run during boot and output the results to the debug log
+	  in TAP format (https://testanything.org/). Only useful for kernel devs
+	  running the KUnit test harness, and not intended for inclusion into a
+	  production build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  This is intended to help people writing architecture-specific
+	  optimized versions. If unsure, say N.
+
+config RESOURCE_KUNIT_TEST
+	tristate "KUnit test for resource API" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the resource API unit test.
+	  Tests the logic of API provided by resource.c and ioport.h.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config SYSCTL_KUNIT_TEST
+	tristate "KUnit test for sysctl" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the proc sysctl unit test, which runs on boot.
+	  Tests the API contract and implementation correctness of sysctl.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config LIST_KUNIT_TEST
+	tristate "KUnit Test for Kernel Linked-list structures" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the linked list KUnit test suite.
+	  It tests that the API and basic functionality of the list_head type
+	  and associated macros.
+
+	  KUnit tests run during boot and output the results to the debug log
+	  in TAP format (https://testanything.org/). Only useful for kernel devs
+	  running the KUnit test harness, and not intended for inclusion into a
+	  production build.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config LINEAR_RANGES_TEST
+	tristate "KUnit test for linear_ranges"
+	depends on KUNIT
+	select LINEAR_RANGES
+	help
+	  This builds the linear_ranges unit test, which runs on boot.
+	  Tests the linear_ranges logic correctness.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config CMDLINE_KUNIT_TEST
+	tristate "KUnit test for cmdline API" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the cmdline API unit test.
+	  Tests the logic of API provided by cmdline.c.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config BITS_TEST
+	tristate "KUnit test for bits.h" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the bits unit test.
+	  Tests the logic of macros defined in bits.h.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config SLUB_KUNIT_TEST
+	tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+	depends on SLUB_DEBUG && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds SLUB allocator unit test.
+	  Tests SLUB cache debugging functionality.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config RATIONAL_KUNIT_TEST
+	tristate "KUnit test for rational.c" if !KUNIT_ALL_TESTS
+	depends on KUNIT && RATIONAL
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the rational math unit test.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config MEMCPY_KUNIT_TEST
+	tristate "Test memcpy(), memmove(), and memset() functions at runtime" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Builds unit tests for memcpy(), memmove(), and memset() functions.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config IS_SIGNED_TYPE_KUNIT_TEST
+	tristate "Test is_signed_type() macro" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Builds unit tests for the is_signed_type() macro.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config OVERFLOW_KUNIT_TEST
+	tristate "Test check_*_overflow() functions at runtime" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Builds unit tests for the check_*_overflow(), size_*(), allocation, and
+	  related functions.
+
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
+config STACKINIT_KUNIT_TEST
+	tristate "Test level of stack variable initialization" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Test if the kernel is zero-initializing stack variables and
+	  padding. Coverage is controlled by compiler flags,
+	  CONFIG_INIT_STACK_ALL_PATTERN, CONFIG_INIT_STACK_ALL_ZERO,
+	  CONFIG_GCC_PLUGIN_STRUCTLEAK, CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF,
+	  or CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL.
+
+config FORTIFY_KUNIT_TEST
+	tristate "Test fortified str*() and mem*() function internals at runtime" if !KUNIT_ALL_TESTS
+	depends on KUNIT && FORTIFY_SOURCE
+	default KUNIT_ALL_TESTS
+	help
+	  Builds unit tests for checking internals of FORTIFY_SOURCE as used
+	  by the str*() and mem*() family of functions. For testing runtime
+	  traps of FORTIFY_SOURCE, see LKDTM's "FORTIFY_*" tests.
+
+config HW_BREAKPOINT_KUNIT_TEST
+	bool "Test hw_breakpoint constraints accounting" if !KUNIT_ALL_TESTS
+	depends on HAVE_HW_BREAKPOINT
+	depends on KUNIT=y
+	default KUNIT_ALL_TESTS
+	help
+	  Tests for hw_breakpoint constraints accounting.
+
+	  If unsure, say N.
+
+config TEST_UDELAY
+	tristate "udelay test driver"
+	help
+	  This builds the "udelay_test" module that helps to make sure
+	  that udelay() is working properly.
+
+	  If unsure, say N.
+
+config TEST_STATIC_KEYS
+	tristate "Test static keys"
+	depends on m
+	help
+	  Test the static key interfaces.
+
+	  If unsure, say N.
+
+config TEST_DYNAMIC_DEBUG
+	tristate "Test DYNAMIC_DEBUG"
+	depends on DYNAMIC_DEBUG
+	help
+	  This module registers a tracer callback to count enabled
+	  pr_debugs in a 'do_debugging' function, then alters their
+	  enablements, calls the function, and compares counts.
+
+	  If unsure, say N.
+
+config TEST_KMOD
+	tristate "kmod stress tester"
+	depends on m
+	depends on NETDEVICES && NET_CORE && INET # for TUN
+	depends on BLOCK
+	depends on PAGE_SIZE_LESS_THAN_256KB # for BTRFS
+	select TEST_LKM
+	select XFS_FS
+	select TUN
+	select BTRFS_FS
+	help
+	  Test the kernel's module loading mechanism: kmod. kmod implements
+	  support to load modules using the Linux kernel's usermode helper.
+	  This test provides a series of tests against kmod.
+
+	  Although technically you can either build test_kmod as a module or
+	  into the kernel we disallow building it into the kernel since
+	  it stress tests request_module() and this will very likely cause
+	  some issues by taking over precious threads available from other
+	  module load requests, ultimately this could be fatal.
+
+	  To run tests run:
+
+	  tools/testing/selftests/kmod/kmod.sh --help
+
+	  If unsure, say N.
+
+config TEST_DEBUG_VIRTUAL
+	tristate "Test CONFIG_DEBUG_VIRTUAL feature"
+	depends on DEBUG_VIRTUAL
+	help
+	  Test the kernel's ability to detect incorrect calls to
+	  virt_to_phys() done against the non-linear part of the
+	  kernel's virtual address map.
+
+	  If unsure, say N.
+
+config TEST_MEMCAT_P
+	tristate "Test memcat_p() helper function"
+	help
+	  Test the memcat_p() helper for correctly merging two
+	  pointer arrays together.
+
+	  If unsure, say N.
+
+config TEST_LIVEPATCH
+	tristate "Test livepatching"
+	default n
+	depends on DYNAMIC_DEBUG
+	depends on LIVEPATCH
+	depends on m
+	help
+	  Test kernel livepatching features for correctness.  The tests will
+	  load test modules that will be livepatched in various scenarios.
+
+	  To run all the livepatching tests:
+
+	  make -C tools/testing/selftests TARGETS=livepatch run_tests
+
+	  Alternatively, individual tests may be invoked:
+
+	  tools/testing/selftests/livepatch/test-callbacks.sh
+	  tools/testing/selftests/livepatch/test-livepatch.sh
+	  tools/testing/selftests/livepatch/test-shadow-vars.sh
+
+	  If unsure, say N.
+
+config TEST_OBJAGG
+	tristate "Perform selftest on object aggreration manager"
+	default n
+	depends on OBJAGG
+	help
+	  Enable this option to test object aggregation manager on boot
+	  (or module load).
+
+config TEST_MEMINIT
+	tristate "Test heap/page initialization"
+	help
+	  Test if the kernel is zero-initializing heap and page allocations.
+	  This can be useful to test init_on_alloc and init_on_free features.
+
+	  If unsure, say N.
+
+config TEST_HMM
+	tristate "Test HMM (Heterogeneous Memory Management)"
+	depends on TRANSPARENT_HUGEPAGE
+	depends on DEVICE_PRIVATE
+	select HMM_MIRROR
+	select MMU_NOTIFIER
+	help
+	  This is a pseudo device driver solely for testing HMM.
+	  Say M here if you want to build the HMM test module.
+	  Doing so will allow you to run tools/testing/selftest/vm/hmm-tests.
+
+	  If unsure, say N.
+
+config TEST_FREE_PAGES
+	tristate "Test freeing pages"
+	help
+	  Test that a memory leak does not occur due to a race between
+	  freeing a block of pages and a speculative page reference.
+	  Loading this module is safe if your kernel has the bug fixed.
+	  If the bug is not fixed, it will leak gigabytes of memory and
+	  probably OOM your system.
+
+config TEST_FPU
+	tristate "Test floating point operations in kernel space"
+	depends on X86 && !KCOV_INSTRUMENT_ALL
+	help
+	  Enable this option to add /sys/kernel/debug/selftest_helpers/test_fpu
+	  which will trigger a sequence of floating point operations. This is used
+	  for self-testing floating point control register setting in
+	  kernel_fpu_begin().
+
+	  If unsure, say N.
+
+config TEST_CLOCKSOURCE_WATCHDOG
+	tristate "Test clocksource watchdog in kernel space"
+	depends on CLOCKSOURCE_WATCHDOG
+	help
+	  Enable this option to create a kernel module that will trigger
+	  a test of the clocksource watchdog.  This module may be loaded
+	  via modprobe or insmod in which case it will run upon being
+	  loaded, or it may be built in, in which case it will run
+	  shortly after boot.
+
+	  If unsure, say N.
+
+endif # RUNTIME_TESTING_MENU
+
+config ARCH_USE_MEMTEST
+	bool
+	help
+	  An architecture should select this when it uses early_memtest()
+	  during boot process.
+
+config MEMTEST
+	bool "Memtest"
+	depends on ARCH_USE_MEMTEST
+	help
+	  This option adds a kernel parameter 'memtest', which allows memtest
+	  to be set and executed.
+	        memtest=0, mean disabled; -- default
+	        memtest=1, mean do 1 test pattern;
+	        ...
+	        memtest=17, mean do 17 test patterns.
+	  If you are unsure how to answer this question, answer N.
+
+
+
+config HYPERV_TESTING
+	bool "Microsoft Hyper-V driver testing"
+	default n
+	depends on HYPERV && DEBUG_FS
+	help
+	  Select this option to enable Hyper-V vmbus testing.
+
+endmenu # "Kernel Testing and Coverage"
+
+menu "Rust hacking"
+
+config RUST_DEBUG_ASSERTIONS
+	bool "Debug assertions"
+	depends on RUST
+	help
+	  Enables rustc's `-Cdebug-assertions` codegen option.
+
+	  This flag lets you turn `cfg(debug_assertions)` conditional
+	  compilation on or off. This can be used to enable extra debugging
+	  code in development but not in production. For example, it controls
+	  the behavior of the standard library's `debug_assert!` macro.
+
+	  Note that this will apply to all Rust code, including `core`.
+
+	  If unsure, say N.
+
+config RUST_OVERFLOW_CHECKS
+	bool "Overflow checks"
+	default y
+	depends on RUST
+	help
+	  Enables rustc's `-Coverflow-checks` codegen option.
+
+	  This flag allows you to control the behavior of runtime integer
+	  overflow. When overflow-checks are enabled, a Rust panic will occur
+	  on overflow.
+
+	  Note that this will apply to all Rust code, including `core`.
+
+	  If unsure, say Y.
+
+endmenu # "Rust"
+
+source "Documentation/Kconfig"
+
+endmenu # Kernel hacking