Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1445 insertions, 0 deletions

diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c
new file mode 100644
index 000000000..4b8aac1a3
--- /dev/null
+++ b/sound/soc/ti/omap-mcbsp.c
@@ -0,0 +1,1445 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap-mcbsp.c  --  OMAP ALSA SoC DAI driver using McBSP port
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
+ *          Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "omap-mcbsp-priv.h"
+#include "omap-mcbsp.h"
+#include "sdma-pcm.h"
+
+#define OMAP_MCBSP_RATES	(SNDRV_PCM_RATE_8000_96000)
+
+enum {
+	OMAP_MCBSP_WORD_8 = 0,
+	OMAP_MCBSP_WORD_12,
+	OMAP_MCBSP_WORD_16,
+	OMAP_MCBSP_WORD_20,
+	OMAP_MCBSP_WORD_24,
+	OMAP_MCBSP_WORD_32,
+};
+
+static void omap_mcbsp_dump_reg(struct omap_mcbsp *mcbsp)
+{
+	dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
+	dev_dbg(mcbsp->dev, "DRR2:  0x%04x\n", MCBSP_READ(mcbsp, DRR2));
+	dev_dbg(mcbsp->dev, "DRR1:  0x%04x\n", MCBSP_READ(mcbsp, DRR1));
+	dev_dbg(mcbsp->dev, "DXR2:  0x%04x\n", MCBSP_READ(mcbsp, DXR2));
+	dev_dbg(mcbsp->dev, "DXR1:  0x%04x\n", MCBSP_READ(mcbsp, DXR1));
+	dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", MCBSP_READ(mcbsp, SPCR2));
+	dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", MCBSP_READ(mcbsp, SPCR1));
+	dev_dbg(mcbsp->dev, "RCR2:  0x%04x\n", MCBSP_READ(mcbsp, RCR2));
+	dev_dbg(mcbsp->dev, "RCR1:  0x%04x\n", MCBSP_READ(mcbsp, RCR1));
+	dev_dbg(mcbsp->dev, "XCR2:  0x%04x\n", MCBSP_READ(mcbsp, XCR2));
+	dev_dbg(mcbsp->dev, "XCR1:  0x%04x\n", MCBSP_READ(mcbsp, XCR1));
+	dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", MCBSP_READ(mcbsp, SRGR2));
+	dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", MCBSP_READ(mcbsp, SRGR1));
+	dev_dbg(mcbsp->dev, "PCR0:  0x%04x\n", MCBSP_READ(mcbsp, PCR0));
+	dev_dbg(mcbsp->dev, "***********************\n");
+}
+
+static int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id)
+{
+	struct clk *fck_src;
+	const char *src;
+	int r;
+
+	if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+		src = "pad_fck";
+	else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+		src = "prcm_fck";
+	else
+		return -EINVAL;
+
+	fck_src = clk_get(mcbsp->dev, src);
+	if (IS_ERR(fck_src)) {
+		dev_err(mcbsp->dev, "CLKS: could not clk_get() %s\n", src);
+		return -EINVAL;
+	}
+
+	if (mcbsp->active)
+		pm_runtime_put_sync(mcbsp->dev);
+
+	r = clk_set_parent(mcbsp->fclk, fck_src);
+	if (r)
+		dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n",
+			src);
+
+	if (mcbsp->active)
+		pm_runtime_get_sync(mcbsp->dev);
+
+	clk_put(fck_src);
+
+	return r;
+}
+
+static irqreturn_t omap_mcbsp_irq_handler(int irq, void *data)
+{
+	struct omap_mcbsp *mcbsp = data;
+	u16 irqst;
+
+	irqst = MCBSP_READ(mcbsp, IRQST);
+	dev_dbg(mcbsp->dev, "IRQ callback : 0x%x\n", irqst);
+
+	if (irqst & RSYNCERREN)
+		dev_err(mcbsp->dev, "RX Frame Sync Error!\n");
+	if (irqst & RFSREN)
+		dev_dbg(mcbsp->dev, "RX Frame Sync\n");
+	if (irqst & REOFEN)
+		dev_dbg(mcbsp->dev, "RX End Of Frame\n");
+	if (irqst & RRDYEN)
+		dev_dbg(mcbsp->dev, "RX Buffer Threshold Reached\n");
+	if (irqst & RUNDFLEN)
+		dev_err(mcbsp->dev, "RX Buffer Underflow!\n");
+	if (irqst & ROVFLEN)
+		dev_err(mcbsp->dev, "RX Buffer Overflow!\n");
+
+	if (irqst & XSYNCERREN)
+		dev_err(mcbsp->dev, "TX Frame Sync Error!\n");
+	if (irqst & XFSXEN)
+		dev_dbg(mcbsp->dev, "TX Frame Sync\n");
+	if (irqst & XEOFEN)
+		dev_dbg(mcbsp->dev, "TX End Of Frame\n");
+	if (irqst & XRDYEN)
+		dev_dbg(mcbsp->dev, "TX Buffer threshold Reached\n");
+	if (irqst & XUNDFLEN)
+		dev_err(mcbsp->dev, "TX Buffer Underflow!\n");
+	if (irqst & XOVFLEN)
+		dev_err(mcbsp->dev, "TX Buffer Overflow!\n");
+	if (irqst & XEMPTYEOFEN)
+		dev_dbg(mcbsp->dev, "TX Buffer empty at end of frame\n");
+
+	MCBSP_WRITE(mcbsp, IRQST, irqst);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *data)
+{
+	struct omap_mcbsp *mcbsp = data;
+	u16 irqst_spcr2;
+
+	irqst_spcr2 = MCBSP_READ(mcbsp, SPCR2);
+	dev_dbg(mcbsp->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
+
+	if (irqst_spcr2 & XSYNC_ERR) {
+		dev_err(mcbsp->dev, "TX Frame Sync Error! : 0x%x\n",
+			irqst_spcr2);
+		/* Writing zero to XSYNC_ERR clears the IRQ */
+		MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2));
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *data)
+{
+	struct omap_mcbsp *mcbsp = data;
+	u16 irqst_spcr1;
+
+	irqst_spcr1 = MCBSP_READ(mcbsp, SPCR1);
+	dev_dbg(mcbsp->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
+
+	if (irqst_spcr1 & RSYNC_ERR) {
+		dev_err(mcbsp->dev, "RX Frame Sync Error! : 0x%x\n",
+			irqst_spcr1);
+		/* Writing zero to RSYNC_ERR clears the IRQ */
+		MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1));
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * omap_mcbsp_config simply write a config to the
+ * appropriate McBSP.
+ * You either call this function or set the McBSP registers
+ * by yourself before calling omap_mcbsp_start().
+ */
+static void omap_mcbsp_config(struct omap_mcbsp *mcbsp,
+			      const struct omap_mcbsp_reg_cfg *config)
+{
+	dev_dbg(mcbsp->dev, "Configuring McBSP%d  phys_base: 0x%08lx\n",
+		mcbsp->id, mcbsp->phys_base);
+
+	/* We write the given config */
+	MCBSP_WRITE(mcbsp, SPCR2, config->spcr2);
+	MCBSP_WRITE(mcbsp, SPCR1, config->spcr1);
+	MCBSP_WRITE(mcbsp, RCR2, config->rcr2);
+	MCBSP_WRITE(mcbsp, RCR1, config->rcr1);
+	MCBSP_WRITE(mcbsp, XCR2, config->xcr2);
+	MCBSP_WRITE(mcbsp, XCR1, config->xcr1);
+	MCBSP_WRITE(mcbsp, SRGR2, config->srgr2);
+	MCBSP_WRITE(mcbsp, SRGR1, config->srgr1);
+	MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
+	MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
+	MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
+	if (mcbsp->pdata->has_ccr) {
+		MCBSP_WRITE(mcbsp, XCCR, config->xccr);
+		MCBSP_WRITE(mcbsp, RCCR, config->rccr);
+	}
+	/* Enable wakeup behavior */
+	if (mcbsp->pdata->has_wakeup)
+		MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
+
+	/* Enable TX/RX sync error interrupts by default */
+	if (mcbsp->irq)
+		MCBSP_WRITE(mcbsp, IRQEN, RSYNCERREN | XSYNCERREN |
+			    RUNDFLEN | ROVFLEN | XUNDFLEN | XOVFLEN);
+}
+
+/**
+ * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register
+ * @mcbsp: omap_mcbsp struct for the McBSP instance
+ * @stream: Stream direction (playback/capture)
+ *
+ * Returns the address of mcbsp data transmit register or data receive register
+ * to be used by DMA for transferring/receiving data
+ */
+static int omap_mcbsp_dma_reg_params(struct omap_mcbsp *mcbsp,
+				     unsigned int stream)
+{
+	int data_reg;
+
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (mcbsp->pdata->reg_size == 2)
+			data_reg = OMAP_MCBSP_REG_DXR1;
+		else
+			data_reg = OMAP_MCBSP_REG_DXR;
+	} else {
+		if (mcbsp->pdata->reg_size == 2)
+			data_reg = OMAP_MCBSP_REG_DRR1;
+		else
+			data_reg = OMAP_MCBSP_REG_DRR;
+	}
+
+	return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
+}
+
+/*
+ * omap_mcbsp_set_rx_threshold configures the transmit threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH2 register.
+ */
+static void omap_mcbsp_set_tx_threshold(struct omap_mcbsp *mcbsp, u16 threshold)
+{
+	if (threshold && threshold <= mcbsp->max_tx_thres)
+		MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
+}
+
+/*
+ * omap_mcbsp_set_rx_threshold configures the receive threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH1 register.
+ */
+static void omap_mcbsp_set_rx_threshold(struct omap_mcbsp *mcbsp, u16 threshold)
+{
+	if (threshold && threshold <= mcbsp->max_rx_thres)
+		MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
+}
+
+/*
+ * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO
+ */
+static u16 omap_mcbsp_get_tx_delay(struct omap_mcbsp *mcbsp)
+{
+	u16 buffstat;
+
+	/* Returns the number of free locations in the buffer */
+	buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
+
+	/* Number of slots are different in McBSP ports */
+	return mcbsp->pdata->buffer_size - buffstat;
+}
+
+/*
+ * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO
+ * to reach the threshold value (when the DMA will be triggered to read it)
+ */
+static u16 omap_mcbsp_get_rx_delay(struct omap_mcbsp *mcbsp)
+{
+	u16 buffstat, threshold;
+
+	/* Returns the number of used locations in the buffer */
+	buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
+	/* RX threshold */
+	threshold = MCBSP_READ(mcbsp, THRSH1);
+
+	/* Return the number of location till we reach the threshold limit */
+	if (threshold <= buffstat)
+		return 0;
+	else
+		return threshold - buffstat;
+}
+
+static int omap_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+	void *reg_cache;
+	int err;
+
+	reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
+	if (!reg_cache)
+		return -ENOMEM;
+
+	spin_lock(&mcbsp->lock);
+	if (!mcbsp->free) {
+		dev_err(mcbsp->dev, "McBSP%d is currently in use\n", mcbsp->id);
+		err = -EBUSY;
+		goto err_kfree;
+	}
+
+	mcbsp->free = false;
+	mcbsp->reg_cache = reg_cache;
+	spin_unlock(&mcbsp->lock);
+
+	if(mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+		mcbsp->pdata->ops->request(mcbsp->id - 1);
+
+	/*
+	 * Make sure that transmitter, receiver and sample-rate generator are
+	 * not running before activating IRQs.
+	 */
+	MCBSP_WRITE(mcbsp, SPCR1, 0);
+	MCBSP_WRITE(mcbsp, SPCR2, 0);
+
+	if (mcbsp->irq) {
+		err = request_irq(mcbsp->irq, omap_mcbsp_irq_handler, 0,
+				  "McBSP", (void *)mcbsp);
+		if (err != 0) {
+			dev_err(mcbsp->dev, "Unable to request IRQ\n");
+			goto err_clk_disable;
+		}
+	} else {
+		err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, 0,
+				  "McBSP TX", (void *)mcbsp);
+		if (err != 0) {
+			dev_err(mcbsp->dev, "Unable to request TX IRQ\n");
+			goto err_clk_disable;
+		}
+
+		err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, 0,
+				  "McBSP RX", (void *)mcbsp);
+		if (err != 0) {
+			dev_err(mcbsp->dev, "Unable to request RX IRQ\n");
+			goto err_free_irq;
+		}
+	}
+
+	return 0;
+err_free_irq:
+	free_irq(mcbsp->tx_irq, (void *)mcbsp);
+err_clk_disable:
+	if(mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+		mcbsp->pdata->ops->free(mcbsp->id - 1);
+
+	/* Disable wakeup behavior */
+	if (mcbsp->pdata->has_wakeup)
+		MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
+
+	spin_lock(&mcbsp->lock);
+	mcbsp->free = true;
+	mcbsp->reg_cache = NULL;
+err_kfree:
+	spin_unlock(&mcbsp->lock);
+	kfree(reg_cache);
+
+	return err;
+}
+
+static void omap_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+	void *reg_cache;
+
+	if(mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+		mcbsp->pdata->ops->free(mcbsp->id - 1);
+
+	/* Disable wakeup behavior */
+	if (mcbsp->pdata->has_wakeup)
+		MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
+
+	/* Disable interrupt requests */
+	if (mcbsp->irq) {
+		MCBSP_WRITE(mcbsp, IRQEN, 0);
+
+		free_irq(mcbsp->irq, (void *)mcbsp);
+	} else {
+		free_irq(mcbsp->rx_irq, (void *)mcbsp);
+		free_irq(mcbsp->tx_irq, (void *)mcbsp);
+	}
+
+	reg_cache = mcbsp->reg_cache;
+
+	/*
+	 * Select CLKS source from internal source unconditionally before
+	 * marking the McBSP port as free.
+	 * If the external clock source via MCBSP_CLKS pin has been selected the
+	 * system will refuse to enter idle if the CLKS pin source is not reset
+	 * back to internal source.
+	 */
+	if (!mcbsp_omap1())
+		omap2_mcbsp_set_clks_src(mcbsp, MCBSP_CLKS_PRCM_SRC);
+
+	spin_lock(&mcbsp->lock);
+	if (mcbsp->free)
+		dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
+	else
+		mcbsp->free = true;
+	mcbsp->reg_cache = NULL;
+	spin_unlock(&mcbsp->lock);
+
+	kfree(reg_cache);
+}
+
+/*
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
+ */
+static void omap_mcbsp_start(struct omap_mcbsp *mcbsp, int stream)
+{
+	int tx = (stream == SNDRV_PCM_STREAM_PLAYBACK);
+	int rx = !tx;
+	int enable_srg = 0;
+	u16 w;
+
+	if (mcbsp->st_data)
+		omap_mcbsp_st_start(mcbsp);
+
+	/* Only enable SRG, if McBSP is master */
+	w = MCBSP_READ_CACHE(mcbsp, PCR0);
+	if (w & (FSXM | FSRM | CLKXM | CLKRM))
+		enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+				MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
+
+	if (enable_srg) {
+		/* Start the sample generator */
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
+	}
+
+	/* Enable transmitter and receiver */
+	tx &= 1;
+	w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+	MCBSP_WRITE(mcbsp, SPCR2, w | tx);
+
+	rx &= 1;
+	w = MCBSP_READ_CACHE(mcbsp, SPCR1);
+	MCBSP_WRITE(mcbsp, SPCR1, w | rx);
+
+	/*
+	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+	 * REVISIT: 100us may give enough time for two CLKSRG, however
+	 * due to some unknown PM related, clock gating etc. reason it
+	 * is now at 500us.
+	 */
+	udelay(500);
+
+	if (enable_srg) {
+		/* Start frame sync */
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
+	}
+
+	if (mcbsp->pdata->has_ccr) {
+		/* Release the transmitter and receiver */
+		w = MCBSP_READ_CACHE(mcbsp, XCCR);
+		w &= ~(tx ? XDISABLE : 0);
+		MCBSP_WRITE(mcbsp, XCCR, w);
+		w = MCBSP_READ_CACHE(mcbsp, RCCR);
+		w &= ~(rx ? RDISABLE : 0);
+		MCBSP_WRITE(mcbsp, RCCR, w);
+	}
+
+	/* Dump McBSP Regs */
+	omap_mcbsp_dump_reg(mcbsp);
+}
+
+static void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int stream)
+{
+	int tx = (stream == SNDRV_PCM_STREAM_PLAYBACK);
+	int rx = !tx;
+	int idle;
+	u16 w;
+
+	/* Reset transmitter */
+	tx &= 1;
+	if (mcbsp->pdata->has_ccr) {
+		w = MCBSP_READ_CACHE(mcbsp, XCCR);
+		w |= (tx ? XDISABLE : 0);
+		MCBSP_WRITE(mcbsp, XCCR, w);
+	}
+	w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+	MCBSP_WRITE(mcbsp, SPCR2, w & ~tx);
+
+	/* Reset receiver */
+	rx &= 1;
+	if (mcbsp->pdata->has_ccr) {
+		w = MCBSP_READ_CACHE(mcbsp, RCCR);
+		w |= (rx ? RDISABLE : 0);
+		MCBSP_WRITE(mcbsp, RCCR, w);
+	}
+	w = MCBSP_READ_CACHE(mcbsp, SPCR1);
+	MCBSP_WRITE(mcbsp, SPCR1, w & ~rx);
+
+	idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+			MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
+
+	if (idle) {
+		/* Reset the sample rate generator */
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+		MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
+	}
+
+	if (mcbsp->st_data)
+		omap_mcbsp_st_stop(mcbsp);
+}
+
+#define max_thres(m)			(mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val)		((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop)					\
+static ssize_t prop##_show(struct device *dev,				\
+			struct device_attribute *attr, char *buf)	\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+									\
+	return sysfs_emit(buf, "%u\n", mcbsp->prop);			\
+}									\
+									\
+static ssize_t prop##_store(struct device *dev,				\
+				struct device_attribute *attr,		\
+				const char *buf, size_t size)		\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+	unsigned long val;						\
+	int status;							\
+									\
+	status = kstrtoul(buf, 0, &val);				\
+	if (status)							\
+		return status;						\
+									\
+	if (!valid_threshold(mcbsp, val))				\
+		return -EDOM;						\
+									\
+	mcbsp->prop = val;						\
+	return size;							\
+}									\
+									\
+static DEVICE_ATTR_RW(prop)
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const char * const dma_op_modes[] = {
+	"element", "threshold",
+};
+
+static ssize_t dma_op_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	int dma_op_mode, i = 0;
+	ssize_t len = 0;
+	const char * const *s;
+
+	dma_op_mode = mcbsp->dma_op_mode;
+
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+		if (dma_op_mode == i)
+			len += sysfs_emit_at(buf, len, "[%s] ", *s);
+		else
+			len += sysfs_emit_at(buf, len, "%s ", *s);
+	}
+	len += sysfs_emit_at(buf, len, "\n");
+
+	return len;
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t size)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	int i;
+
+	i = sysfs_match_string(dma_op_modes, buf);
+	if (i < 0)
+		return i;
+
+	spin_lock_irq(&mcbsp->lock);
+	if (!mcbsp->free) {
+		size = -EBUSY;
+		goto unlock;
+	}
+	mcbsp->dma_op_mode = i;
+
+unlock:
+	spin_unlock_irq(&mcbsp->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(dma_op_mode);
+
+static const struct attribute *additional_attrs[] = {
+	&dev_attr_max_tx_thres.attr,
+	&dev_attr_max_rx_thres.attr,
+	&dev_attr_dma_op_mode.attr,
+	NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+	.attrs = (struct attribute **)additional_attrs,
+};
+
+/*
+ * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
+ * 730 has only 2 McBSP, and both of them are MPU peripherals.
+ */
+static int omap_mcbsp_init(struct platform_device *pdev)
+{
+	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
+	struct resource *res;
+	int ret;
+
+	spin_lock_init(&mcbsp->lock);
+	mcbsp->free = true;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
+	if (!res)
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	mcbsp->io_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mcbsp->io_base))
+		return PTR_ERR(mcbsp->io_base);
+
+	mcbsp->phys_base = res->start;
+	mcbsp->reg_cache_size = resource_size(res);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
+	if (!res)
+		mcbsp->phys_dma_base = mcbsp->phys_base;
+	else
+		mcbsp->phys_dma_base = res->start;
+
+	/*
+	 * OMAP1, 2 uses two interrupt lines: TX, RX
+	 * OMAP2430, OMAP3 SoC have combined IRQ line as well.
+	 * OMAP4 and newer SoC only have the combined IRQ line.
+	 * Use the combined IRQ if available since it gives better debugging
+	 * possibilities.
+	 */
+	mcbsp->irq = platform_get_irq_byname(pdev, "common");
+	if (mcbsp->irq == -ENXIO) {
+		mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
+
+		if (mcbsp->tx_irq == -ENXIO) {
+			mcbsp->irq = platform_get_irq(pdev, 0);
+			mcbsp->tx_irq = 0;
+		} else {
+			mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
+			mcbsp->irq = 0;
+		}
+	}
+
+	if (!pdev->dev.of_node) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
+		if (!res) {
+			dev_err(&pdev->dev, "invalid tx DMA channel\n");
+			return -ENODEV;
+		}
+		mcbsp->dma_req[0] = res->start;
+		mcbsp->dma_data[0].filter_data = &mcbsp->dma_req[0];
+
+		res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
+		if (!res) {
+			dev_err(&pdev->dev, "invalid rx DMA channel\n");
+			return -ENODEV;
+		}
+		mcbsp->dma_req[1] = res->start;
+		mcbsp->dma_data[1].filter_data = &mcbsp->dma_req[1];
+	} else {
+		mcbsp->dma_data[0].filter_data = "tx";
+		mcbsp->dma_data[1].filter_data = "rx";
+	}
+
+	mcbsp->dma_data[0].addr = omap_mcbsp_dma_reg_params(mcbsp,
+						SNDRV_PCM_STREAM_PLAYBACK);
+	mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp,
+						SNDRV_PCM_STREAM_CAPTURE);
+
+	mcbsp->fclk = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(mcbsp->fclk)) {
+		ret = PTR_ERR(mcbsp->fclk);
+		dev_err(mcbsp->dev, "unable to get fck: %d\n", ret);
+		return ret;
+	}
+
+	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+	if (mcbsp->pdata->buffer_size) {
+		/*
+		 * Initially configure the maximum thresholds to a safe value.
+		 * The McBSP FIFO usage with these values should not go under
+		 * 16 locations.
+		 * If the whole FIFO without safety buffer is used, than there
+		 * is a possibility that the DMA will be not able to push the
+		 * new data on time, causing channel shifts in runtime.
+		 */
+		mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+		mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
+
+		ret = devm_device_add_group(mcbsp->dev, &additional_attr_group);
+		if (ret) {
+			dev_err(mcbsp->dev,
+				"Unable to create additional controls\n");
+			return ret;
+		}
+	}
+
+	return omap_mcbsp_st_init(pdev);
+}
+
+/*
+ * Stream DMA parameters. DMA request line and port address are set runtime
+ * since they are different between OMAP1 and later OMAPs
+ */
+static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream,
+		unsigned int packet_size)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	int words;
+
+	/* No need to proceed further if McBSP does not have FIFO */
+	if (mcbsp->pdata->buffer_size == 0)
+		return;
+
+	/*
+	 * Configure McBSP threshold based on either:
+	 * packet_size, when the sDMA is in packet mode, or based on the
+	 * period size in THRESHOLD mode, otherwise use McBSP threshold = 1
+	 * for mono streams.
+	 */
+	if (packet_size)
+		words = packet_size;
+	else
+		words = 1;
+
+	/* Configure McBSP internal buffer usage */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		omap_mcbsp_set_tx_threshold(mcbsp, words);
+	else
+		omap_mcbsp_set_rx_threshold(mcbsp, words);
+}
+
+static int omap_mcbsp_hwrule_min_buffersize(struct snd_pcm_hw_params *params,
+				    struct snd_pcm_hw_rule *rule)
+{
+	struct snd_interval *buffer_size = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_BUFFER_SIZE);
+	struct snd_interval *channels = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct omap_mcbsp *mcbsp = rule->private;
+	struct snd_interval frames;
+	int size;
+
+	snd_interval_any(&frames);
+	size = mcbsp->pdata->buffer_size;
+
+	frames.min = size / channels->min;
+	frames.integer = 1;
+	return snd_interval_refine(buffer_size, &frames);
+}
+
+static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
+				  struct snd_soc_dai *cpu_dai)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	int err = 0;
+
+	if (!snd_soc_dai_active(cpu_dai))
+		err = omap_mcbsp_request(mcbsp);
+
+	/*
+	 * OMAP3 McBSP FIFO is word structured.
+	 * McBSP2 has 1024 + 256 = 1280 word long buffer,
+	 * McBSP1,3,4,5 has 128 word long buffer
+	 * This means that the size of the FIFO depends on the sample format.
+	 * For example on McBSP3:
+	 * 16bit samples: size is 128 * 2 = 256 bytes
+	 * 32bit samples: size is 128 * 4 = 512 bytes
+	 * It is simpler to place constraint for buffer and period based on
+	 * channels.
+	 * McBSP3 as example again (16 or 32 bit samples):
+	 * 1 channel (mono): size is 128 frames (128 words)
+	 * 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words)
+	 * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words)
+	 */
+	if (mcbsp->pdata->buffer_size) {
+		/*
+		* Rule for the buffer size. We should not allow
+		* smaller buffer than the FIFO size to avoid underruns.
+		* This applies only for the playback stream.
+		*/
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			snd_pcm_hw_rule_add(substream->runtime, 0,
+					    SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+					    omap_mcbsp_hwrule_min_buffersize,
+					    mcbsp,
+					    SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+
+		/* Make sure, that the period size is always even */
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
+	}
+
+	return err;
+}
+
+static void omap_mcbsp_dai_shutdown(struct snd_pcm_substream *substream,
+				    struct snd_soc_dai *cpu_dai)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+	int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+	int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+
+	if (mcbsp->latency[stream2])
+		cpu_latency_qos_update_request(&mcbsp->pm_qos_req,
+					       mcbsp->latency[stream2]);
+	else if (mcbsp->latency[stream1])
+		cpu_latency_qos_remove_request(&mcbsp->pm_qos_req);
+
+	mcbsp->latency[stream1] = 0;
+
+	if (!snd_soc_dai_active(cpu_dai)) {
+		omap_mcbsp_free(mcbsp);
+		mcbsp->configured = 0;
+	}
+}
+
+static int omap_mcbsp_dai_prepare(struct snd_pcm_substream *substream,
+				  struct snd_soc_dai *cpu_dai)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	struct pm_qos_request *pm_qos_req = &mcbsp->pm_qos_req;
+	int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+	int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+	int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+	int latency = mcbsp->latency[stream2];
+
+	/* Prevent omap hardware from hitting off between FIFO fills */
+	if (!latency || mcbsp->latency[stream1] < latency)
+		latency = mcbsp->latency[stream1];
+
+	if (cpu_latency_qos_request_active(pm_qos_req))
+		cpu_latency_qos_update_request(pm_qos_req, latency);
+	else if (latency)
+		cpu_latency_qos_add_request(pm_qos_req, latency);
+
+	return 0;
+}
+
+static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+				  struct snd_soc_dai *cpu_dai)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		mcbsp->active++;
+		omap_mcbsp_start(mcbsp, substream->stream);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		omap_mcbsp_stop(mcbsp, substream->stream);
+		mcbsp->active--;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static snd_pcm_sframes_t omap_mcbsp_dai_delay(
+			struct snd_pcm_substream *substream,
+			struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	u16 fifo_use;
+	snd_pcm_sframes_t delay;
+
+	/* No need to proceed further if McBSP does not have FIFO */
+	if (mcbsp->pdata->buffer_size == 0)
+		return 0;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		fifo_use = omap_mcbsp_get_tx_delay(mcbsp);
+	else
+		fifo_use = omap_mcbsp_get_rx_delay(mcbsp);
+
+	/*
+	 * Divide the used locations with the channel count to get the
+	 * FIFO usage in samples (don't care about partial samples in the
+	 * buffer).
+	 */
+	delay = fifo_use / substream->runtime->channels;
+
+	return delay;
+}
+
+static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
+				    struct snd_pcm_hw_params *params,
+				    struct snd_soc_dai *cpu_dai)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
+	struct snd_dmaengine_dai_dma_data *dma_data;
+	int wlen, channels, wpf;
+	int pkt_size = 0;
+	unsigned int format, div, framesize, master;
+	unsigned int buffer_size = mcbsp->pdata->buffer_size;
+
+	dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
+	channels = params_channels(params);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		wlen = 16;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		wlen = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (buffer_size) {
+		int latency;
+
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+			int period_words, max_thrsh;
+			int divider = 0;
+
+			period_words = params_period_bytes(params) / (wlen / 8);
+			if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+				max_thrsh = mcbsp->max_tx_thres;
+			else
+				max_thrsh = mcbsp->max_rx_thres;
+			/*
+			 * Use sDMA packet mode if McBSP is in threshold mode:
+			 * If period words less than the FIFO size the packet
+			 * size is set to the number of period words, otherwise
+			 * Look for the biggest threshold value which divides
+			 * the period size evenly.
+			 */
+			divider = period_words / max_thrsh;
+			if (period_words % max_thrsh)
+				divider++;
+			while (period_words % divider &&
+				divider < period_words)
+				divider++;
+			if (divider == period_words)
+				return -EINVAL;
+
+			pkt_size = period_words / divider;
+		} else if (channels > 1) {
+			/* Use packet mode for non mono streams */
+			pkt_size = channels;
+		}
+
+		latency = (buffer_size - pkt_size) / channels;
+		latency = latency * USEC_PER_SEC /
+			  (params->rate_num / params->rate_den);
+		mcbsp->latency[substream->stream] = latency;
+
+		omap_mcbsp_set_threshold(substream, pkt_size);
+	}
+
+	dma_data->maxburst = pkt_size;
+
+	if (mcbsp->configured) {
+		/* McBSP already configured by another stream */
+		return 0;
+	}
+
+	regs->rcr2	&= ~(RPHASE | RFRLEN2(0x7f) | RWDLEN2(7));
+	regs->xcr2	&= ~(RPHASE | XFRLEN2(0x7f) | XWDLEN2(7));
+	regs->rcr1	&= ~(RFRLEN1(0x7f) | RWDLEN1(7));
+	regs->xcr1	&= ~(XFRLEN1(0x7f) | XWDLEN1(7));
+	format = mcbsp->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+	wpf = channels;
+	if (channels == 2 && (format == SND_SOC_DAIFMT_I2S ||
+			      format == SND_SOC_DAIFMT_LEFT_J)) {
+		/* Use dual-phase frames */
+		regs->rcr2	|= RPHASE;
+		regs->xcr2	|= XPHASE;
+		/* Set 1 word per (McBSP) frame for phase1 and phase2 */
+		wpf--;
+		regs->rcr2	|= RFRLEN2(wpf - 1);
+		regs->xcr2	|= XFRLEN2(wpf - 1);
+	}
+
+	regs->rcr1	|= RFRLEN1(wpf - 1);
+	regs->xcr1	|= XFRLEN1(wpf - 1);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		/* Set word lengths */
+		regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_16);
+		regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_16);
+		regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_16);
+		regs->xcr1	|= XWDLEN1(OMAP_MCBSP_WORD_16);
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		/* Set word lengths */
+		regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_32);
+		regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_32);
+		regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_32);
+		regs->xcr1	|= XWDLEN1(OMAP_MCBSP_WORD_32);
+		break;
+	default:
+		/* Unsupported PCM format */
+		return -EINVAL;
+	}
+
+	/* In McBSP master modes, FRAME (i.e. sample rate) is generated
+	 * by _counting_ BCLKs. Calculate frame size in BCLKs */
+	master = mcbsp->fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK;
+	if (master == SND_SOC_DAIFMT_BP_FP) {
+		div = mcbsp->clk_div ? mcbsp->clk_div : 1;
+		framesize = (mcbsp->in_freq / div) / params_rate(params);
+
+		if (framesize < wlen * channels) {
+			printk(KERN_ERR "%s: not enough bandwidth for desired rate and "
+					"channels\n", __func__);
+			return -EINVAL;
+		}
+	} else
+		framesize = wlen * channels;
+
+	/* Set FS period and length in terms of bit clock periods */
+	regs->srgr2	&= ~FPER(0xfff);
+	regs->srgr1	&= ~FWID(0xff);
+	switch (format) {
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_LEFT_J:
+		regs->srgr2	|= FPER(framesize - 1);
+		regs->srgr1	|= FWID((framesize >> 1) - 1);
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		regs->srgr2	|= FPER(framesize - 1);
+		regs->srgr1	|= FWID(0);
+		break;
+	}
+
+	omap_mcbsp_config(mcbsp, &mcbsp->cfg_regs);
+	mcbsp->wlen = wlen;
+	mcbsp->configured = 1;
+
+	return 0;
+}
+
+/*
+ * This must be called before _set_clkdiv and _set_sysclk since McBSP register
+ * cache is initialized here
+ */
+static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+				      unsigned int fmt)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
+	bool inv_fs = false;
+
+	if (mcbsp->configured)
+		return 0;
+
+	mcbsp->fmt = fmt;
+	memset(regs, 0, sizeof(*regs));
+	/* Generic McBSP register settings */
+	regs->spcr2	|= XINTM(3) | FREE;
+	regs->spcr1	|= RINTM(3);
+	/* RFIG and XFIG are not defined in 2430 and on OMAP3+ */
+	if (!mcbsp->pdata->has_ccr) {
+		regs->rcr2	|= RFIG;
+		regs->xcr2	|= XFIG;
+	}
+
+	/* Configure XCCR/RCCR only for revisions which have ccr registers */
+	if (mcbsp->pdata->has_ccr) {
+		regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE;
+		regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		/* 1-bit data delay */
+		regs->rcr2	|= RDATDLY(1);
+		regs->xcr2	|= XDATDLY(1);
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		/* 0-bit data delay */
+		regs->rcr2	|= RDATDLY(0);
+		regs->xcr2	|= XDATDLY(0);
+		regs->spcr1	|= RJUST(2);
+		/* Invert FS polarity configuration */
+		inv_fs = true;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		/* 1-bit data delay */
+		regs->rcr2      |= RDATDLY(1);
+		regs->xcr2      |= XDATDLY(1);
+		/* Invert FS polarity configuration */
+		inv_fs = true;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		/* 0-bit data delay */
+		regs->rcr2      |= RDATDLY(0);
+		regs->xcr2      |= XDATDLY(0);
+		/* Invert FS polarity configuration */
+		inv_fs = true;
+		break;
+	default:
+		/* Unsupported data format */
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BP_FP:
+		/* McBSP master. Set FS and bit clocks as outputs */
+		regs->pcr0	|= FSXM | FSRM |
+				   CLKXM | CLKRM;
+		/* Sample rate generator drives the FS */
+		regs->srgr2	|= FSGM;
+		break;
+	case SND_SOC_DAIFMT_BC_FP:
+		/* McBSP slave. FS clock as output */
+		regs->srgr2	|= FSGM;
+		regs->pcr0	|= FSXM | FSRM;
+		break;
+	case SND_SOC_DAIFMT_BC_FC:
+		/* McBSP slave */
+		break;
+	default:
+		/* Unsupported master/slave configuration */
+		return -EINVAL;
+	}
+
+	/* Set bit clock (CLKX/CLKR) and FS polarities */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		/*
+		 * Normal BCLK + FS.
+		 * FS active low. TX data driven on falling edge of bit clock
+		 * and RX data sampled on rising edge of bit clock.
+		 */
+		regs->pcr0	|= FSXP | FSRP |
+				   CLKXP | CLKRP;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		regs->pcr0	|= CLKXP | CLKRP;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		regs->pcr0	|= FSXP | FSRP;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (inv_fs)
+		regs->pcr0 ^= FSXP | FSRP;
+
+	return 0;
+}
+
+static int omap_mcbsp_dai_set_clkdiv(struct snd_soc_dai *cpu_dai,
+				     int div_id, int div)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
+
+	if (div_id != OMAP_MCBSP_CLKGDV)
+		return -ENODEV;
+
+	mcbsp->clk_div = div;
+	regs->srgr1	&= ~CLKGDV(0xff);
+	regs->srgr1	|= CLKGDV(div - 1);
+
+	return 0;
+}
+
+static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+					 int clk_id, unsigned int freq,
+					 int dir)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
+	struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
+	int err = 0;
+
+	if (mcbsp->active) {
+		if (freq == mcbsp->in_freq)
+			return 0;
+		else
+			return -EBUSY;
+	}
+
+	mcbsp->in_freq = freq;
+	regs->srgr2 &= ~CLKSM;
+	regs->pcr0 &= ~SCLKME;
+
+	switch (clk_id) {
+	case OMAP_MCBSP_SYSCLK_CLK:
+		regs->srgr2	|= CLKSM;
+		break;
+	case OMAP_MCBSP_SYSCLK_CLKS_FCLK:
+		if (mcbsp_omap1()) {
+			err = -EINVAL;
+			break;
+		}
+		err = omap2_mcbsp_set_clks_src(mcbsp,
+					       MCBSP_CLKS_PRCM_SRC);
+		break;
+	case OMAP_MCBSP_SYSCLK_CLKS_EXT:
+		if (mcbsp_omap1()) {
+			err = 0;
+			break;
+		}
+		err = omap2_mcbsp_set_clks_src(mcbsp,
+					       MCBSP_CLKS_PAD_SRC);
+		break;
+
+	case OMAP_MCBSP_SYSCLK_CLKX_EXT:
+		regs->srgr2	|= CLKSM;
+		regs->pcr0	|= SCLKME;
+		/*
+		 * If McBSP is master but yet the CLKX/CLKR pin drives the SRG,
+		 * disable output on those pins. This enables to inject the
+		 * reference clock through CLKX/CLKR. For this to work
+		 * set_dai_sysclk() _needs_ to be called after set_dai_fmt().
+		 */
+		regs->pcr0	&= ~CLKXM;
+		break;
+	case OMAP_MCBSP_SYSCLK_CLKR_EXT:
+		regs->pcr0	|= SCLKME;
+		/* Disable ouput on CLKR pin in master mode */
+		regs->pcr0	&= ~CLKRM;
+		break;
+	default:
+		err = -ENODEV;
+	}
+
+	return err;
+}
+
+static const struct snd_soc_dai_ops mcbsp_dai_ops = {
+	.startup	= omap_mcbsp_dai_startup,
+	.shutdown	= omap_mcbsp_dai_shutdown,
+	.prepare	= omap_mcbsp_dai_prepare,
+	.trigger	= omap_mcbsp_dai_trigger,
+	.delay		= omap_mcbsp_dai_delay,
+	.hw_params	= omap_mcbsp_dai_hw_params,
+	.set_fmt	= omap_mcbsp_dai_set_dai_fmt,
+	.set_clkdiv	= omap_mcbsp_dai_set_clkdiv,
+	.set_sysclk	= omap_mcbsp_dai_set_dai_sysclk,
+};
+
+static int omap_mcbsp_probe(struct snd_soc_dai *dai)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai);
+
+	pm_runtime_enable(mcbsp->dev);
+
+	snd_soc_dai_init_dma_data(dai,
+				  &mcbsp->dma_data[SNDRV_PCM_STREAM_PLAYBACK],
+				  &mcbsp->dma_data[SNDRV_PCM_STREAM_CAPTURE]);
+
+	return 0;
+}
+
+static int omap_mcbsp_remove(struct snd_soc_dai *dai)
+{
+	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai);
+
+	pm_runtime_disable(mcbsp->dev);
+
+	return 0;
+}
+
+static struct snd_soc_dai_driver omap_mcbsp_dai = {
+	.probe = omap_mcbsp_probe,
+	.remove = omap_mcbsp_remove,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 16,
+		.rates = OMAP_MCBSP_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 16,
+		.rates = OMAP_MCBSP_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
+	},
+	.ops = &mcbsp_dai_ops,
+};
+
+static const struct snd_soc_component_driver omap_mcbsp_component = {
+	.name			= "omap-mcbsp",
+	.legacy_dai_naming	= 1,
+};
+
+static struct omap_mcbsp_platform_data omap2420_pdata = {
+	.reg_step = 4,
+	.reg_size = 2,
+};
+
+static struct omap_mcbsp_platform_data omap2430_pdata = {
+	.reg_step = 4,
+	.reg_size = 4,
+	.has_ccr = true,
+};
+
+static struct omap_mcbsp_platform_data omap3_pdata = {
+	.reg_step = 4,
+	.reg_size = 4,
+	.has_ccr = true,
+	.has_wakeup = true,
+};
+
+static struct omap_mcbsp_platform_data omap4_pdata = {
+	.reg_step = 4,
+	.reg_size = 4,
+	.has_ccr = true,
+	.has_wakeup = true,
+};
+
+static const struct of_device_id omap_mcbsp_of_match[] = {
+	{
+		.compatible = "ti,omap2420-mcbsp",
+		.data = &omap2420_pdata,
+	},
+	{
+		.compatible = "ti,omap2430-mcbsp",
+		.data = &omap2430_pdata,
+	},
+	{
+		.compatible = "ti,omap3-mcbsp",
+		.data = &omap3_pdata,
+	},
+	{
+		.compatible = "ti,omap4-mcbsp",
+		.data = &omap4_pdata,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, omap_mcbsp_of_match);
+
+static int asoc_mcbsp_probe(struct platform_device *pdev)
+{
+	struct omap_mcbsp_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct omap_mcbsp *mcbsp;
+	const struct of_device_id *match;
+	int ret;
+
+	match = of_match_device(omap_mcbsp_of_match, &pdev->dev);
+	if (match) {
+		struct device_node *node = pdev->dev.of_node;
+		struct omap_mcbsp_platform_data *pdata_quirk = pdata;
+		int buffer_size;
+
+		pdata = devm_kzalloc(&pdev->dev,
+				     sizeof(struct omap_mcbsp_platform_data),
+				     GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		memcpy(pdata, match->data, sizeof(*pdata));
+		if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size))
+			pdata->buffer_size = buffer_size;
+		if (pdata_quirk)
+			pdata->force_ick_on = pdata_quirk->force_ick_on;
+	} else if (!pdata) {
+		dev_err(&pdev->dev, "missing platform data.\n");
+		return -EINVAL;
+	}
+	mcbsp = devm_kzalloc(&pdev->dev, sizeof(struct omap_mcbsp), GFP_KERNEL);
+	if (!mcbsp)
+		return -ENOMEM;
+
+	mcbsp->id = pdev->id;
+	mcbsp->pdata = pdata;
+	mcbsp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, mcbsp);
+
+	ret = omap_mcbsp_init(pdev);
+	if (ret)
+		return ret;
+
+	if (mcbsp->pdata->reg_size == 2) {
+		omap_mcbsp_dai.playback.formats = SNDRV_PCM_FMTBIT_S16_LE;
+		omap_mcbsp_dai.capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
+	}
+
+	ret = devm_snd_soc_register_component(&pdev->dev,
+					      &omap_mcbsp_component,
+					      &omap_mcbsp_dai, 1);
+	if (ret)
+		return ret;
+
+	return sdma_pcm_platform_register(&pdev->dev, "tx", "rx");
+}
+
+static int asoc_mcbsp_remove(struct platform_device *pdev)
+{
+	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
+
+	if (mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+		mcbsp->pdata->ops->free(mcbsp->id);
+
+	if (cpu_latency_qos_request_active(&mcbsp->pm_qos_req))
+		cpu_latency_qos_remove_request(&mcbsp->pm_qos_req);
+
+	return 0;
+}
+
+static struct platform_driver asoc_mcbsp_driver = {
+	.driver = {
+			.name = "omap-mcbsp",
+			.of_match_table = omap_mcbsp_of_match,
+	},
+
+	.probe = asoc_mcbsp_probe,
+	.remove = asoc_mcbsp_remove,
+};
+
+module_platform_driver(asoc_mcbsp_driver);
+
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
+MODULE_DESCRIPTION("OMAP I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-mcbsp");