Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 542 insertions, 0 deletions

diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c
new file mode 100644
index 000000000..d173971e5
--- /dev/null
+++ b/sound/usb/line6/pod.c
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ */
+
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+/*
+	Locate name in binary program dump
+*/
+#define	POD_NAME_OFFSET 0
+#define	POD_NAME_LENGTH 16
+
+/*
+	Other constants
+*/
+#define POD_CONTROL_SIZE 0x80
+#define POD_BUFSIZE_DUMPREQ 7
+#define POD_STARTUP_DELAY 1000
+
+/*
+	Stages of POD startup procedure
+*/
+enum {
+	POD_STARTUP_VERSIONREQ,
+	POD_STARTUP_SETUP,
+	POD_STARTUP_DONE,
+};
+
+enum {
+	LINE6_BASSPODXT,
+	LINE6_BASSPODXTLIVE,
+	LINE6_BASSPODXTPRO,
+	LINE6_POCKETPOD,
+	LINE6_PODXT,
+	LINE6_PODXTLIVE_POD,
+	LINE6_PODXTPRO,
+};
+
+struct usb_line6_pod {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Instrument monitor level */
+	int monitor_level;
+
+	/* Current progress in startup procedure */
+	int startup_progress;
+
+	/* Serial number of device */
+	u32 serial_number;
+
+	/* Firmware version (x 100) */
+	int firmware_version;
+
+	/* Device ID */
+	int device_id;
+};
+
+#define line6_to_pod(x)		container_of(x, struct usb_line6_pod, line6)
+
+#define POD_SYSEX_CODE 3
+
+/* *INDENT-OFF* */
+
+enum {
+	POD_SYSEX_SAVE      = 0x24,
+	POD_SYSEX_SYSTEM    = 0x56,
+	POD_SYSEX_SYSTEMREQ = 0x57,
+	/* POD_SYSEX_UPDATE    = 0x6c, */  /* software update! */
+	POD_SYSEX_STORE     = 0x71,
+	POD_SYSEX_FINISH    = 0x72,
+	POD_SYSEX_DUMPMEM   = 0x73,
+	POD_SYSEX_DUMP      = 0x74,
+	POD_SYSEX_DUMPREQ   = 0x75
+
+	/* dumps entire internal memory of PODxt Pro */
+	/* POD_SYSEX_DUMPMEM2  = 0x76 */
+};
+
+enum {
+	POD_MONITOR_LEVEL  = 0x04,
+	POD_SYSTEM_INVALID = 0x10000
+};
+
+/* *INDENT-ON* */
+
+enum {
+	POD_DUMP_MEMORY = 2
+};
+
+enum {
+	POD_BUSY_READ,
+	POD_BUSY_WRITE,
+	POD_CHANNEL_DIRTY,
+	POD_SAVE_PRESSED,
+	POD_BUSY_MIDISEND
+};
+
+static const struct snd_ratden pod_ratden = {
+	.num_min = 78125,
+	.num_max = 78125,
+	.num_step = 1,
+	.den = 2
+};
+
+static struct line6_pcm_properties pod_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				  .rates = SNDRV_PCM_RATE_KNOT,
+				  .rate_min = 39062,
+				  .rate_max = 39063,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				 .rates = SNDRV_PCM_RATE_KNOT,
+				 .rate_min = 39062,
+				 .rate_max = 39063,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &pod_ratden},
+	.bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
+};
+
+
+static const char pod_version_header[] = {
+	0xf0, 0x7e, 0x7f, 0x06, 0x02
+};
+
+static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
+				    int size)
+{
+	return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
+					size);
+}
+
+/*
+	Process a completely received message.
+*/
+static void line6_pod_process_message(struct usb_line6 *line6)
+{
+	struct usb_line6_pod *pod = line6_to_pod(line6);
+	const unsigned char *buf = pod->line6.buffer_message;
+
+	if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
+		pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
+		pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
+				 (int) buf[10];
+		if (pod->startup_progress == POD_STARTUP_VERSIONREQ) {
+			pod->startup_progress = POD_STARTUP_SETUP;
+			schedule_delayed_work(&line6->startup_work, 0);
+		}
+		return;
+	}
+
+	/* Only look for sysex messages from this device */
+	if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) &&
+	    buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) {
+		return;
+	}
+	if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0)
+		return;
+
+	if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) {
+		short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) |
+			      ((int)buf[9] << 4) | (int)buf[10];
+		pod->monitor_level = value;
+	}
+}
+
+/*
+	Send system parameter (from integer).
+*/
+static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
+				    int code)
+{
+	char *sysex;
+	static const int size = 5;
+
+	sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
+	if (!sysex)
+		return -ENOMEM;
+	sysex[SYSEX_DATA_OFS] = code;
+	sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
+	line6_send_sysex_message(&pod->line6, sysex, size);
+	kfree(sysex);
+	return 0;
+}
+
+/*
+	"read" request on "serial_number" special file.
+*/
+static ssize_t serial_number_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_pod *pod = card->private_data;
+
+	return sysfs_emit(buf, "%u\n", pod->serial_number);
+}
+
+/*
+	"read" request on "firmware_version" special file.
+*/
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_pod *pod = card->private_data;
+
+	return sysfs_emit(buf, "%d.%02d\n", pod->firmware_version / 100,
+			  pod->firmware_version % 100);
+}
+
+/*
+	"read" request on "device_id" special file.
+*/
+static ssize_t device_id_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_pod *pod = card->private_data;
+
+	return sysfs_emit(buf, "%d\n", pod->device_id);
+}
+
+/*
+	POD startup procedure.
+	This is a sequence of functions with special requirements (e.g., must
+	not run immediately after initialization, must not run in interrupt
+	context). After the last one has finished, the device is ready to use.
+*/
+
+static void pod_startup(struct usb_line6 *line6)
+{
+	struct usb_line6_pod *pod = line6_to_pod(line6);
+
+	switch (pod->startup_progress) {
+	case POD_STARTUP_VERSIONREQ:
+		/* request firmware version: */
+		line6_version_request_async(line6);
+		break;
+	case POD_STARTUP_SETUP:
+		/* serial number: */
+		line6_read_serial_number(&pod->line6, &pod->serial_number);
+
+		/* ALSA audio interface: */
+		if (snd_card_register(line6->card))
+			dev_err(line6->ifcdev, "Failed to register POD card.\n");
+		pod->startup_progress = POD_STARTUP_DONE;
+		break;
+	default:
+		break;
+	}
+}
+
+/* POD special files: */
+static DEVICE_ATTR_RO(device_id);
+static DEVICE_ATTR_RO(firmware_version);
+static DEVICE_ATTR_RO(serial_number);
+
+static struct attribute *pod_dev_attrs[] = {
+	&dev_attr_device_id.attr,
+	&dev_attr_firmware_version.attr,
+	&dev_attr_serial_number.attr,
+	NULL
+};
+
+static const struct attribute_group pod_dev_attr_group = {
+	.name = "pod",
+	.attrs = pod_dev_attrs,
+};
+
+/* control info callback */
+static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 65535;
+	return 0;
+}
+
+/* control get callback */
+static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
+
+	ucontrol->value.integer.value[0] = pod->monitor_level;
+	return 0;
+}
+
+/* control put callback */
+static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
+
+	if (ucontrol->value.integer.value[0] == pod->monitor_level)
+		return 0;
+
+	pod->monitor_level = ucontrol->value.integer.value[0];
+	pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
+				 POD_MONITOR_LEVEL);
+	return 1;
+}
+
+/* control definition */
+static const struct snd_kcontrol_new pod_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_pod_control_monitor_info,
+	.get = snd_pod_control_monitor_get,
+	.put = snd_pod_control_monitor_put
+};
+
+/*
+	 Try to init POD device.
+*/
+static int pod_init(struct usb_line6 *line6,
+		    const struct usb_device_id *id)
+{
+	int err;
+	struct usb_line6_pod *pod = line6_to_pod(line6);
+
+	line6->process_message = line6_pod_process_message;
+	line6->startup = pod_startup;
+
+	/* create sysfs entries: */
+	err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group);
+	if (err < 0)
+		return err;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &pod_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register monitor control: */
+	err = snd_ctl_add(line6->card,
+			  snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
+	if (err < 0)
+		return err;
+
+	/*
+	   When the sound card is registered at this point, the PODxt Live
+	   displays "Invalid Code Error 07", so we do it later in the event
+	   handler.
+	 */
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
+		pod->monitor_level = POD_SYSTEM_INVALID;
+
+		/* initiate startup procedure: */
+		schedule_delayed_work(&line6->startup_work,
+				      msecs_to_jiffies(POD_STARTUP_DELAY));
+	}
+
+	return 0;
+}
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id pod_id_table[] = {
+	{ LINE6_DEVICE(0x4250),    .driver_info = LINE6_BASSPODXT },
+	{ LINE6_DEVICE(0x4642),    .driver_info = LINE6_BASSPODXTLIVE },
+	{ LINE6_DEVICE(0x4252),    .driver_info = LINE6_BASSPODXTPRO },
+	{ LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD },
+	{ LINE6_DEVICE(0x5044),    .driver_info = LINE6_PODXT },
+	{ LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD },
+	{ LINE6_DEVICE(0x5050),    .driver_info = LINE6_PODXTPRO },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, pod_id_table);
+
+static const struct line6_properties pod_properties_table[] = {
+	[LINE6_BASSPODXT] = {
+		.id = "BassPODxt",
+		.name = "BassPODxt",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_BASSPODXTLIVE] = {
+		.id = "BassPODxtLive",
+		.name = "BassPODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_BASSPODXTPRO] = {
+		.id = "BassPODxtPro",
+		.name = "BassPODxt Pro",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_POCKETPOD] = {
+		.id = "PocketPOD",
+		.name = "Pocket POD",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI,
+		.altsetting = 0,
+		.ep_ctrl_r = 0x82,
+		.ep_ctrl_w = 0x02,
+		/* no audio channel */
+	},
+	[LINE6_PODXT] = {
+		.id = "PODxt",
+		.name = "PODxt",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODXTLIVE_POD] = {
+		.id = "PODxtLive",
+		.name = "PODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODXTPRO] = {
+		.id = "PODxtPro",
+		.name = "PODxt Pro",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int pod_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-POD",
+			   &pod_properties_table[id->driver_info],
+			   pod_init, sizeof(struct usb_line6_pod));
+}
+
+static struct usb_driver pod_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = pod_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = line6_resume,
+#endif
+	.id_table = pod_id_table,
+};
+
+module_usb_driver(pod_driver);
+
+MODULE_DESCRIPTION("Line 6 POD USB driver");
+MODULE_LICENSE("GPL");