Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 398 insertions, 0 deletions

diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
new file mode 100644
index 000000000..c1fdba26b
--- /dev/null
+++ b/tools/perf/Documentation/perf-top.txt
@@ -0,0 +1,398 @@
+perf-top(1)
+===========
+
+NAME
+----
+perf-top - System profiling tool.
+
+SYNOPSIS
+--------
+[verse]
+'perf top' [-e <EVENT> | --event=EVENT] [<options>]
+
+DESCRIPTION
+-----------
+This command generates and displays a performance counter profile in real time.
+
+
+OPTIONS
+-------
+-a::
+--all-cpus::
+        System-wide collection.  (default)
+
+-c <count>::
+--count=<count>::
+	Event period to sample.
+
+-C <cpu-list>::
+--cpu=<cpu>::
+Monitor only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Default is to monitor all CPUS.
+
+-d <seconds>::
+--delay=<seconds>::
+	Number of seconds to delay between refreshes.
+
+-e <event>::
+--event=<event>::
+	Select the PMU event. Selection can be a symbolic event name
+	(use 'perf list' to list all events) or a raw PMU event in the form
+	of rN where N is a hexadecimal value that represents the raw register
+	encoding with the layout of the event control registers as described
+	by entries in /sys/bus/event_source/devices/cpu/format/*.
+
+-E <entries>::
+--entries=<entries>::
+	Display this many functions.
+
+-f <count>::
+--count-filter=<count>::
+	Only display functions with more events than this.
+
+--group::
+        Put the counters into a counter group.
+
+--group-sort-idx::
+	Sort the output by the event at the index n in group. If n is invalid,
+	sort by the first event. It can support multiple groups with different
+	amount of events. WARNING: This should be used on grouped events.
+
+-F <freq>::
+--freq=<freq>::
+	Profile at this frequency. Use 'max' to use the currently maximum
+	allowed frequency, i.e. the value in the kernel.perf_event_max_sample_rate
+	sysctl.
+
+-i::
+--inherit::
+	Child tasks do not inherit counters.
+
+-k <path>::
+--vmlinux=<path>::
+	Path to vmlinux.  Required for annotation functionality.
+
+--ignore-vmlinux::
+	Ignore vmlinux files.
+
+--kallsyms=<file>::
+	kallsyms pathname
+
+-m <pages>::
+--mmap-pages=<pages>::
+	Number of mmap data pages (must be a power of two) or size
+	specification with appended unit character - B/K/M/G. The
+	size is rounded up to have nearest pages power of two value.
+
+-p <pid>::
+--pid=<pid>::
+	Profile events on existing Process ID (comma separated list).
+
+-t <tid>::
+--tid=<tid>::
+        Profile events on existing thread ID (comma separated list).
+
+-u::
+--uid=::
+        Record events in threads owned by uid. Name or number.
+
+-r <priority>::
+--realtime=<priority>::
+	Collect data with this RT SCHED_FIFO priority.
+
+--sym-annotate=<symbol>::
+        Annotate this symbol.
+
+-K::
+--hide_kernel_symbols::
+        Hide kernel symbols.
+
+-U::
+--hide_user_symbols::
+        Hide user symbols.
+
+--demangle-kernel::
+        Demangle kernel symbols.
+
+-D::
+--dump-symtab::
+        Dump the symbol table used for profiling.
+
+-v::
+--verbose::
+	Be more verbose (show counter open errors, etc).
+
+-z::
+--zero::
+	Zero history across display updates.
+
+-s::
+--sort::
+	Sort by key(s): pid, comm, dso, symbol, parent, srcline, weight,
+	local_weight, abort, in_tx, transaction, overhead, sample, period.
+	Please see description of --sort in the perf-report man page.
+
+--fields=::
+	Specify output field - multiple keys can be specified in CSV format.
+	Following fields are available:
+	overhead, overhead_sys, overhead_us, overhead_children, sample and period.
+	Also it can contain any sort key(s).
+
+	By default, every sort keys not specified in --field will be appended
+	automatically.
+
+-n::
+--show-nr-samples::
+	Show a column with the number of samples.
+
+--show-total-period::
+	Show a column with the sum of periods.
+
+--dsos::
+	Only consider symbols in these dsos.  This option will affect the
+	percentage of the overhead column.  See --percentage for more info.
+
+--comms::
+	Only consider symbols in these comms.  This option will affect the
+	percentage of the overhead column.  See --percentage for more info.
+
+--symbols::
+	Only consider these symbols.  This option will affect the
+	percentage of the overhead column.  See --percentage for more info.
+
+-M::
+--disassembler-style=:: Set disassembler style for objdump.
+
+--prefix=PREFIX::
+--prefix-strip=N::
+        Remove first N entries from source file path names in executables
+        and add PREFIX. This allows to display source code compiled on systems
+        with different file system layout.
+
+--source::
+	Interleave source code with assembly code. Enabled by default,
+	disable with --no-source.
+
+--asm-raw::
+	Show raw instruction encoding of assembly instructions.
+
+-g::
+	Enables call-graph (stack chain/backtrace) recording.
+
+--call-graph [mode,type,min[,limit],order[,key][,branch]]::
+	Setup and enable call-graph (stack chain/backtrace) recording,
+	implies -g.  See `--call-graph` section in perf-record and
+	perf-report man pages for details.
+
+--children::
+	Accumulate callchain of children to parent entry so that then can
+	show up in the output.  The output will have a new "Children" column
+	and will be sorted on the data.  It requires -g/--call-graph option
+	enabled.  See the `overhead calculation' section for more details.
+	Enabled by default, disable with --no-children.
+
+--max-stack::
+	Set the stack depth limit when parsing the callchain, anything
+	beyond the specified depth will be ignored. This is a trade-off
+	between information loss and faster processing especially for
+	workloads that can have a very long callchain stack.
+
+	Default: /proc/sys/kernel/perf_event_max_stack when present, 127 otherwise.
+
+--ignore-callees=<regex>::
+        Ignore callees of the function(s) matching the given regex.
+        This has the effect of collecting the callers of each such
+        function into one place in the call-graph tree.
+
+--percent-limit::
+	Do not show entries which have an overhead under that percent.
+	(Default: 0).
+
+--percentage::
+	Determine how to display the overhead percentage of filtered entries.
+	Filters can be applied by --comms, --dsos and/or --symbols options and
+	Zoom operations on the TUI (thread, dso, etc).
+
+	"relative" means it's relative to filtered entries only so that the
+	sum of shown entries will be always 100%. "absolute" means it retains
+	the original value before and after the filter is applied.
+
+-w::
+--column-widths=<width[,width...]>::
+	Force each column width to the provided list, for large terminal
+	readability.  0 means no limit (default behavior).
+
+--proc-map-timeout::
+	When processing pre-existing threads /proc/XXX/mmap, it may take
+	a long time, because the file may be huge. A time out is needed
+	in such cases.
+	This option sets the time out limit. The default value is 500 ms.
+
+
+-b::
+--branch-any::
+	Enable taken branch stack sampling. Any type of taken branch may be sampled.
+	This is a shortcut for --branch-filter any. See --branch-filter for more infos.
+
+-j::
+--branch-filter::
+	Enable taken branch stack sampling. Each sample captures a series of consecutive
+	taken branches. The number of branches captured with each sample depends on the
+	underlying hardware, the type of branches of interest, and the executed code.
+	It is possible to select the types of branches captured by enabling filters.
+	For a full list of modifiers please see the perf record manpage.
+
+	The option requires at least one branch type among any, any_call, any_ret, ind_call, cond.
+	The privilege levels may be omitted, in which case, the privilege levels of the associated
+	event are applied to the branch filter. Both kernel (k) and hypervisor (hv) privilege
+	levels are subject to permissions.  When sampling on multiple events, branch stack sampling
+	is enabled for all the sampling events. The sampled branch type is the same for all events.
+	The various filters must be specified as a comma separated list: --branch-filter any_ret,u,k
+	Note that this feature may not be available on all processors.
+
+--raw-trace::
+	When displaying traceevent output, do not use print fmt or plugins.
+
+--hierarchy::
+	Enable hierarchy output.
+
+--overwrite::
+	Enable this to use just the most recent records, which helps in high core count
+	machines such as Knights Landing/Mill, but right now is disabled by default as
+	the pausing used in this technique is leading to loss of metadata events such
+	as PERF_RECORD_MMAP which makes 'perf top' unable to resolve samples, leading
+	to lots of unknown samples appearing on the UI. Enable this if you are in such
+	machines and profiling a workload that doesn't creates short lived threads and/or
+	doesn't uses many executable mmap operations. Work is being planed to solve
+	this situation, till then, this will remain disabled by default.
+
+--force::
+	Don't do ownership validation.
+
+--num-thread-synthesize::
+	The number of threads to run when synthesizing events for existing processes.
+	By default, the number of threads equals to the number of online CPUs.
+
+--namespaces::
+	Record events of type PERF_RECORD_NAMESPACES and display it with the
+	'cgroup_id' sort key.
+
+-G name::
+--cgroup name::
+monitor only in the container (cgroup) called "name". This option is available only
+in per-cpu mode. The cgroup filesystem must be mounted. All threads belonging to
+container "name" are monitored when they run on the monitored CPUs. Multiple cgroups
+can be provided. Each cgroup is applied to the corresponding event, i.e., first cgroup
+to first event, second cgroup to second event and so on. It is possible to provide
+an empty cgroup (monitor all the time) using, e.g., -G foo,,bar. Cgroups must have
+corresponding events, i.e., they always refer to events defined earlier on the command
+line. If the user wants to track multiple events for a specific cgroup, the user can
+use '-e e1 -e e2 -G foo,foo' or just use '-e e1 -e e2 -G foo'.
+
+--all-cgroups::
+	Record events of type PERF_RECORD_CGROUP and display it with the
+	'cgroup' sort key.
+
+--switch-on EVENT_NAME::
+	Only consider events after this event is found.
+
+	E.g.:
+
+           Find out where broadcast packets are handled
+
+		perf probe -L icmp_rcv
+
+	   Insert a probe there:
+
+		perf probe icmp_rcv:59
+
+	   Start perf top and ask it to only consider the cycles events when a
+           broadcast packet arrives This will show a menu with two entries and
+           will start counting when a broadcast packet arrives:
+
+		perf top -e cycles,probe:icmp_rcv --switch-on=probe:icmp_rcv
+
+	   Alternatively one can ask for --group and then two overhead columns
+           will appear, the first for cycles and the second for the switch-on event.
+
+		perf top --group -e cycles,probe:icmp_rcv --switch-on=probe:icmp_rcv
+
+	This may be interesting to measure a workload only after some initialization
+	phase is over, i.e. insert a perf probe at that point and use the above
+	examples replacing probe:icmp_rcv with the just-after-init probe.
+
+--switch-off EVENT_NAME::
+	Stop considering events after this event is found.
+
+--show-on-off-events::
+	Show the --switch-on/off events too. This has no effect in 'perf top' now
+	but probably we'll make the default not to show the switch-on/off events
+        on the --group mode and if there is only one event besides the off/on ones,
+	go straight to the histogram browser, just like 'perf top' with no events
+	explicitly specified does.
+
+--stitch-lbr::
+	Show callgraph with stitched LBRs, which may have more complete
+	callgraph. The option must be used with --call-graph lbr recording.
+	Disabled by default. In common cases with call stack overflows,
+	it can recreate better call stacks than the default lbr call stack
+	output. But this approach is not full proof. There can be cases
+	where it creates incorrect call stacks from incorrect matches.
+	The known limitations include exception handing such as
+	setjmp/longjmp will have calls/returns not match.
+
+ifdef::HAVE_LIBPFM[]
+--pfm-events events::
+Select a PMU event using libpfm4 syntax (see http://perfmon2.sf.net)
+including support for event filters. For example '--pfm-events
+inst_retired:any_p:u:c=1:i'. More than one event can be passed to the
+option using the comma separator. Hardware events and generic hardware
+events cannot be mixed together. The latter must be used with the -e
+option. The -e option and this one can be mixed and matched.  Events
+can be grouped using the {} notation.
+endif::HAVE_LIBPFM[]
+
+INTERACTIVE PROMPTING KEYS
+--------------------------
+
+[d]::
+	Display refresh delay.
+
+[e]::
+	Number of entries to display.
+
+[E]::
+	Event to display when multiple counters are active.
+
+[f]::
+	Profile display filter (>= hit count).
+
+[F]::
+	Annotation display filter (>= % of total).
+
+[s]::
+	Annotate symbol.
+
+[S]::
+	Stop annotation, return to full profile display.
+
+[K]::
+	Hide kernel symbols.
+
+[U]::
+	Hide user symbols.
+
+[z]::
+	Toggle event count zeroing across display updates.
+
+[qQ]::
+	Quit.
+
+Pressing any unmapped key displays a menu, and prompts for input.
+
+include::callchain-overhead-calculation.txt[]
+
+SEE ALSO
+--------
+linkperf:perf-stat[1], linkperf:perf-list[1], linkperf:perf-report[1]