diff options
Diffstat (limited to 'Documentation/admin-guide/perf/hisi-pmu.rst')
| -rw-r--r-- | Documentation/admin-guide/perf/hisi-pmu.rst | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst new file mode 100644 index 000000000..546979360 --- /dev/null +++ b/Documentation/admin-guide/perf/hisi-pmu.rst @@ -0,0 +1,114 @@ +====================================================== +HiSilicon SoC uncore Performance Monitoring Unit (PMU) +====================================================== + +The HiSilicon SoC chip includes various independent system device PMUs +such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are +independent and have hardware logic to gather statistics and performance +information. + +The HiSilicon SoC encapsulates multiple CPU and IO dies. Each CPU cluster +(CCL) is made up of 4 cpu cores sharing one L3 cache; each CPU die is +called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has +two HHAs (0 - 1) and four DDRCs (0 - 3), respectively. + +HiSilicon SoC uncore PMU driver +------------------------------- + +Each device PMU has separate registers for event counting, control and +interrupt, and the PMU driver shall register perf PMU drivers like L3C, +HHA and DDRC etc. The available events and configuration options shall +be described in the sysfs, see: + +/sys/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>/, or +/sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>. +The "perf list" command shall list the available events from sysfs. + +Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU +name will appear in event listing as hisi_sccl<sccl-id>_module<index-id>. +where "sccl-id" is the identifier of the SCCL and "index-id" is the index of +module. + +e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in +SCCL ID #3. + +e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in +SCCL ID #1. + +The driver also provides a "cpumask" sysfs attribute, which shows the CPU core +ID used to count the uncore PMU event. + +Example usage of perf:: + + $# perf list + hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event] + ------------------------------------------ + hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event] + ------------------------------------------ + hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event] + ------------------------------------------ + hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event] + ------------------------------------------ + + $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5 + $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5 + +For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same +as PMU v1, but some new functions are added to the hardware. + +(a) L3C PMU supports filtering by core/thread within the cluster which can be +specified as a bitmap:: + + $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5 + +This will only count the operations from core/thread 0 and 1 in this cluster. + +(b) Tracetag allow the user to chose to count only read, write or atomic +operations via the tt_req parameeter in perf. The default value counts all +operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101 +represents write operations, 3'b110 represents atomic store operations and +3'b111 represents atomic non-store operations, other values are reserved:: + + $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 + +This will only count the read operations in this cluster. + +(c) Datasrc allows the user to check where the data comes from. It is 5 bits. +Some important codes are as follows: +5'b00001: comes from L3C in this die; +5'b01000: comes from L3C in the cross-die; +5'b01001: comes from L3C which is in another socket; +5'b01110: comes from the local DDR; +5'b01111: comes from the cross-die DDR; +5'b10000: comes from cross-socket DDR; +etc, it is mainly helpful to find that the data source is nearest from the CPU +cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be +configured in perf command:: + + $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/, + hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5 + +(d)Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die +contains several Compute Clusters (CCLs). The I/O dies are called Super I/O +clusters (SICL) containing multiple I/O clusters (ICLs). Each CCL/ICL in the +SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit +CCL/ICL-ID. For I/O die, the ICL-ID is followed by: +5'b00000: I/O_MGMT_ICL; +5'b00001: Network_ICL; +5'b00011: HAC_ICL; +5'b10000: PCIe_ICL; + +Users could configure IDs to count data come from specific CCL/ICL, by setting +srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting +tgtid_cmd & tgtid_msk. A set bit in srcid_msk/tgtid_msk means the PMU will not +check the bit when matching against the srcid_cmd/tgtid_cmd. + +If all of these options are disabled, it can works by the default value that +doesn't distinguish the filter condition and ID information and will return +the total counter values in the PMU counters. + +The current driver does not support sampling. So "perf record" is unsupported. +Also attach to a task is unsupported as the events are all uncore. + +Note: Please contact the maintainer for a complete list of events supported for +the PMU devices in the SoC and its information if needed. |