diff options
Diffstat (limited to '')
29 files changed, 2481 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml new file mode 100644 index 000000000..75d5d9730 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner sunxi Message Box + +maintainers: + - Samuel Holland <samuel@sholland.org> + +description: | + The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a + two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt + is raised for received messages, but software must poll to know when a + transmitted message has been acknowledged by the remote user. Each FIFO can + hold four 32-bit messages; when a FIFO is full, clients must wait before + attempting more transmissions. + + Refer to ./mailbox.txt for generic information about mailbox device-tree + bindings. + +properties: + compatible: + oneOf: + - items: + - enum: + - allwinner,sun8i-a83t-msgbox + - allwinner,sun8i-h3-msgbox + - allwinner,sun9i-a80-msgbox + - allwinner,sun50i-a64-msgbox + - allwinner,sun50i-h6-msgbox + - const: allwinner,sun6i-a31-msgbox + - const: allwinner,sun6i-a31-msgbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: bus clock + + resets: + maxItems: 1 + description: bus reset + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + description: first cell is the channel number (0-7) + +required: + - compatible + - reg + - clocks + - resets + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-h3-ccu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/sun8i-h3-ccu.h> + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-h3-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt new file mode 100644 index 000000000..c4dd93f1f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt @@ -0,0 +1,48 @@ +Altera Mailbox Driver +===================== + +Required properties: +- compatible : "altr,mailbox-1.0". +- reg : physical base address of the mailbox and length of + memory mapped region. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be 1. + +Optional properties: +- interrupts : interrupt number. The interrupt specifier format + depends on the interrupt controller parent. + +Example: + mbox_tx: mailbox@100 { + compatible = "altr,mailbox-1.0"; + reg = <0x100 0x8>; + interrupt-parent = < &gic_0 >; + interrupts = <5>; + #mbox-cells = <1>; + }; + + mbox_rx: mailbox@200 { + compatible = "altr,mailbox-1.0"; + reg = <0x200 0x8>; + interrupt-parent = < &gic_0 >; + interrupts = <6>; + #mbox-cells = <1>; + }; + +Mailbox client +=============== +"mboxes" and the optional "mbox-names" (please see +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value +of the mboxes property should contain a phandle to the mailbox controller +device node and second argument is the channel index. It must be 0 (hardware +support only one channel).The equivalent "mbox-names" property value can be +used to give a name to the communication channel to be used by the client user. + +Example: + mclient0: mclient0@400 { + compatible = "client-1.0"; + reg = <0x400 0x10>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mbox_tx 0>, + <&mbox_rx 0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml new file mode 100644 index 000000000..dfd26b998 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Message-Handling-Unit Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller + that has 3 independent channels/links to communicate with remote processor(s). + MHU links are hardwired on a platform. A link raises interrupt for any + received data. However, there is no specified way of knowing if the sent + data has been read by the remote. This driver assumes the sender polls + STAT register and the remote clears it after having read the data. + +properties: + compatible: + enum: + - amlogic,meson-gxbb-mhu + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + description: + Contains the interrupt information corresponding to each of the 3 links + of MHU. + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@c883c404 { + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0xc883c404 0x4c>; + interrupts = <208>, <209>, <210>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml new file mode 100644 index 000000000..5c5c328b3 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/apple,mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Mailbox Controller + +maintainers: + - Hector Martin <marcan@marcan.st> + - Sven Peter <sven@svenpeter.dev> + +description: + The Apple mailbox consists of two FIFOs used to exchange 64+32 bit + messages between the main CPU and a co-processor. Multiple instances + of this mailbox can be found on Apple SoCs. + One of the two FIFOs is used to send data to a co-processor while the other + FIFO is used for the other direction. + Various clients implement different IPC protocols based on these simple + messages and shared memory buffers. + +properties: + compatible: + oneOf: + - description: + ASC mailboxes are the most common variant found on the M1 used + for example for the display controller, the system management + controller and the NVMe coprocessor. + items: + - enum: + - apple,t8103-asc-mailbox + - apple,t6000-asc-mailbox + - const: apple,asc-mailbox-v4 + + - description: + M3 mailboxes are an older variant with a slightly different MMIO + interface still found on the M1. It is used for the Thunderbolt + co-processors. + items: + - enum: + - apple,t8103-m3-mailbox + - apple,t6000-m3-mailbox + - const: apple,m3-mailbox-v2 + + reg: + maxItems: 1 + + interrupts: + items: + - description: send fifo is empty interrupt + - description: send fifo is not empty interrupt + - description: receive fifo is empty interrupt + - description: receive fifo is not empty interrupt + + interrupt-names: + items: + - const: send-empty + - const: send-not-empty + - const: recv-empty + - const: recv-not-empty + + "#mbox-cells": + const: 0 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@77408000 { + compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x77408000 0x4000>; + interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml new file mode 100644 index 000000000..d9a4f4a02 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHU Mailbox Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3 + independent channels/links to communicate with remote processor(s). MHU links + are hardwired on a platform. A link raises interrupt for any received data. + However, there is no specified way of knowing if the sent data has been read + by the remote. This driver assumes the sender polls STAT register and the + remote clears it after having read the data. The last channel is specified to + be a 'Secure' resource, hence can't be used by Linux running NS. + + The MHU hardware also allows operations in doorbell mode. The MHU drives the + interrupt signal using a 32-bit register, with all 32-bits logically ORed + together. It provides a set of registers to enable software to set, clear and + check the status of each of the bits of this register independently. The use + of 32 bits per interrupt line enables software to provide more information + about the source of the interrupt. For example, each bit of the register can + be associated with a type of event that can contribute to raising the + interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote + processor. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,mhu + - arm,mhu-doorbell + required: + - compatible + +properties: + compatible: + oneOf: + - description: Data transfer mode + items: + - const: arm,mhu + - const: arm,primecell + + - description: Doorbell mode + items: + - const: arm,mhu-doorbell + - const: arm,primecell + + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: low-priority non-secure + - description: high-priority non-secure + - description: Secure + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + '#mbox-cells': + description: | + Set to 1 in data transfer mode and represents index of the channel. + Set to 2 in doorbell mode and represents index of the channel and doorbell + number. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + # Data transfer mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuA: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + }; + + firmware { + scpi { + compatible = "arm,scpi"; + mboxes = <&mhuA 1>; /* HP-NonSecure */ + shmem = <&cpu_scp_hpri>; /* HP-NonSecure */ + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + }; + }; + + # Doorbell mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuB: mailbox@2b2f0000 { + #mbox-cells = <2>; + compatible = "arm,mhu-doorbell", "arm,primecell"; + reg = <0 0x2b2f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + }; + + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */ + <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, + <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + + mboxes = <&mhuB 1 2>, /* HP-NonSecure, 3rd doorbell */ + <&mhuB 1 3>; /* HP-NonSecure, 4th doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_hpri0>, + <&cpu_scp_hpri1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml new file mode 100644 index 000000000..a4f1fe636 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhuv2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHUv2 Mailbox Controller + +maintainers: + - Tushar Khandelwal <tushar.khandelwal@arm.com> + - Viresh Kumar <viresh.kumar@linaro.org> + +description: | + The Arm Message Handling Unit (MHU) Version 2 is a mailbox controller that has + between 1 and 124 channel windows (each 32-bit wide) to provide unidirectional + communication with remote processor(s), where the number of channel windows + are implementation dependent. + + Given the unidirectional nature of the controller, an MHUv2 mailbox may only + be written to or read from. If a pair of MHU controllers is implemented + between two processing elements to provide bidirectional communication, these + must be specified as two separate mailboxes. + + If the interrupts property is present in device tree node, then its treated as + a "receiver" mailbox, otherwise a "sender". + + An MHU controller must be specified along with the supported transport + protocols. The transport protocols determine the method of data transmission + as well as the number of provided mailbox channels. + + Following are the possible transport protocols. + + - Data-transfer: Each transfer is made of one or more words, using one or more + channel windows. + + - Doorbell: Each transfer is made up of single bit flag, using any one of the + bits in a channel window. A channel window can support up to 32 doorbells + and the entire window shall be used in doorbell protocol. Optionally, data + may be transmitted through a shared memory region, wherein the MHU is used + strictly as an interrupt generation mechanism but that is out of the scope + of these bindings. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,mhuv2-tx + - arm,mhuv2-rx + required: + - compatible + +properties: + compatible: + oneOf: + - description: Sender mode + items: + - const: arm,mhuv2-tx + - const: arm,primecell + + - description: Receiver-mode + items: + - const: arm,mhuv2-rx + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + description: | + The MHUv2 controller always implements an interrupt in the "receiver" + mode, while the interrupt in the "sender" mode was not available in the + version MHUv2.0, but the later versions do have it. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + arm,mhuv2-protocols: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + The MHUv2 controller may contain up to 124 channel windows (each 32-bit + wide). The hardware and the DT bindings allows any combination of those to + be used for various transport protocols. + + This property allows a platform to describe how these channel windows are + used in various transport protocols. The entries in this property shall be + present as an array of tuples, where each tuple describes details about + one of the transport protocol being implemented over some channel + window(s). + + The first field of a tuple signifies the transfer protocol, 0 is reserved + for doorbell protocol, and 1 is reserved for data-transfer protocol. + Using any other value in the first field of a tuple makes it invalid. + + The second field of a tuple signifies the number of channel windows where + the protocol would be used and should be set to a non zero value. For + doorbell protocol this field signifies the number of 32-bit channel + windows that implement the doorbell protocol. For data-transfer protocol, + this field signifies the number of 32-bit channel windows that implement + the data-transfer protocol. + + The total number of channel windows specified here shouldn't be more than + the ones implemented by the platform, though one can specify lesser number + of windows here than what the platform implements. + + mhu: mailbox@2b1f0000 { + ... + + arm,mhuv2-protocols = <0 2>, <1 1>, <1 5>, <1 7>; + } + + The above example defines the protocols of an ARM MHUv2 mailbox + controller, where a total of 15 channel windows are used. The first two + windows are used in doorbell protocol (64 doorbells), followed by 1, 5 and + 7 windows (separately) used in data-transfer protocol. + + minItems: 1 + maxItems: 124 + items: + items: + - enum: [ 0, 1 ] + - minimum: 0 + maximum: 124 + + + '#mbox-cells': + description: | + It is always set to 2. The first argument in the consumers 'mboxes' + property represents the channel window group, which may be used in + doorbell, or data-transfer protocol, and the second argument (only + relevant in doorbell protocol, should be 0 otherwise) represents the + doorbell number within the 32 bit wide channel window. + + From the example given above for arm,mhuv2-protocols, here is how a client + node can reference them. + + mboxes = <&mhu 0 5>; // Channel Window Group 0, doorbell 5. + mboxes = <&mhu 1 7>; // Channel Window Group 1, doorbell 7. + mboxes = <&mhu 2 0>; // Channel Window Group 2, data transfer protocol with 1 window. + mboxes = <&mhu 3 0>; // Channel Window Group 3, data transfer protocol with 5 windows. + mboxes = <&mhu 4 0>; // Channel Window Group 4, data transfer protocol with 7 windows. + + const: 2 + +if: + # Interrupt is compulsory for receiver + properties: + compatible: + contains: + const: arm,mhuv2-rx +then: + required: + - interrupts + +required: + - compatible + - reg + - '#mbox-cells' + - arm,mhuv2-protocols + +additionalProperties: false + +examples: + # Multiple transport protocols implemented by the mailbox controllers + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhu_tx: mailbox@2b1f0000 { + #mbox-cells = <2>; + compatible = "arm,mhuv2-tx", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + clocks = <&clock 0>; + clock-names = "apb_pclk"; + interrupts = <0 45 4>; + arm,mhuv2-protocols = <1 5>, <1 2>, <1 5>, <1 7>, <0 2>; + }; + + mhu_rx: mailbox@2b1f1000 { + #mbox-cells = <2>; + compatible = "arm,mhuv2-rx", "arm,primecell"; + reg = <0 0x2b1f1000 0 0x1000>; + clocks = <&clock 0>; + clock-names = "apb_pclk"; + interrupts = <0 46 4>; + arm,mhuv2-protocols = <1 1>, <1 7>, <0 2>; + }; + + mhu_client: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0 0x596e8000 0 0x88000>; + clocks = <&adma_lpcg 0>, <&adma_lpcg 1>, <&adma_lpcg 2>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd 0>, <&pd 1>, <&pd 2>, <&pd 3>; + mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1"; + mboxes = <&mhu_tx 2 0>, //data-transfer protocol with 5 windows, mhu-tx + <&mhu_tx 3 0>, //data-transfer protocol with 7 windows, mhu-tx + <&mhu_rx 2 27>, //doorbell protocol channel 2, doorbell 27, mhu-rx + <&mhu_rx 0 0>; //data-transfer protocol with 1 window, mhu-rx + memory-region = <&dsp_reserved>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt new file mode 100644 index 000000000..b48d7d300 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt @@ -0,0 +1,26 @@ +Broadcom BCM2835 VideoCore mailbox IPC + +Required properties: + +- compatible: Should be "brcm,bcm2835-mbox" +- reg: Specifies base physical address and size of the registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- #mbox-cells: Specifies the number of cells needed to encode a mailbox + channel. The value shall be 0, since there is only one + mailbox channel implemented by the device. + +Example: + +mailbox: mailbox@7e00b880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; +}; + +firmware: firmware { + compatible = "raspberrypi,firmware"; + mboxes = <&mailbox>; + #power-domain-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt new file mode 100644 index 000000000..752ae6b00 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -0,0 +1,59 @@ +Broadcom FlexRM Ring Manager +============================ +The Broadcom FlexRM ring manager provides a set of rings which can be +used to submit work to offload engines. An SoC may have multiple FlexRM +hardware blocks. There is one device tree entry per FlexRM block. The +FlexRM driver will create a mailbox-controller instance for given FlexRM +hardware block where each mailbox channel is a separate FlexRM ring. + +Required properties: +-------------------- +- compatible: Should be "brcm,iproc-flexrm-mbox" +- reg: Specifies base physical address and size of the FlexRM + ring registers +- msi-parent: Phandles (and potential Device IDs) to MSI controllers + The FlexRM engine will send MSIs (instead of wired + interrupts) to CPU. There is one MSI for each FlexRM ring. + Refer devicetree/bindings/interrupt-controller/msi.txt +- #mbox-cells: Specifies the number of cells needed to encode a mailbox + channel. This should be 3. + + The 1st cell is the mailbox channel number. + + The 2nd cell contains MSI completion threshold. This is the + number of completion messages for which FlexRM will inject + one MSI interrupt to CPU. + + The 3nd cell contains MSI timer value representing time for + which FlexRM will wait to accumulate N completion messages + where N is the value specified by 2nd cell above. If FlexRM + does not get required number of completion messages in time + specified by this cell then it will inject one MSI interrupt + to CPU provided atleast one completion message is available. + +Optional properties: +-------------------- +- dma-coherent: Present if DMA operations made by the FlexRM engine (such + as DMA descriptor access, access to buffers pointed by DMA + descriptors and read/write pointer updates to DDR) are + cache coherent with the CPU. + +Example: +-------- +crypto_mbox: mbox@67000000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x67000000 0x200000>; + msi-parent = <&gic_its 0x7f00>; + #mbox-cells = <3>; +}; + +crypto@672c0000 { + compatible = "brcm,spu2-v2-crypto"; + reg = <0x672c0000 0x1000>; + mboxes = <&crypto_mbox 0 0x1 0xffff>, + <&crypto_mbox 1 0x1 0xffff>, + <&crypto_mbox 16 0x1 0xffff>, + <&crypto_mbox 17 0x1 0xffff>, + <&crypto_mbox 30 0x1 0xffff>, + <&crypto_mbox 31 0x1 0xffff>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt new file mode 100644 index 000000000..9bcdf2087 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt @@ -0,0 +1,25 @@ +The PDC driver manages data transfer to and from various offload engines +on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is +one device tree entry per block. On some chips, the PDC functionality is +handled by the FA2 (Northstar Plus). + +Required properties: +- compatible : Should be "brcm,iproc-pdc-mbox" or "brcm,iproc-fa2-mbox" for + FA2/Northstar Plus. +- reg: Should contain PDC registers location and length. +- interrupts: Should contain the IRQ line for the PDC. +- #mbox-cells: 1 +- brcm,rx-status-len: Length of metadata preceding received frames, in bytes. + +Optional properties: +- brcm,use-bcm-hdr: present if a BCM header precedes each frame. + +Example: + pdc0: iproc-pdc0@612c0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */ + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; /* one cell per mailbox channel */ + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml new file mode 100644 index 000000000..191c1ce15 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/fsl,mu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX Messaging Unit (MU) + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: | + The Messaging Unit module enables two processors within the SoC to + communicate and coordinate by passing messages (e.g. data, status + and control) through the MU interface. The MU also provides the ability + for one processor to signal the other processor using interrupts. + + Because the MU manages the messaging between processors, the MU uses + different clocks (from each side of the different peripheral buses). + Therefore, the MU must synchronize the accesses from one side to the + other. The MU accomplishes synchronization using two sets of matching + registers (Processor A-facing, Processor B-facing). + +properties: + compatible: + oneOf: + - const: fsl,imx6sx-mu + - const: fsl,imx7ulp-mu + - const: fsl,imx8ulp-mu + - const: fsl,imx8-mu-scu + - const: fsl,imx8-mu-seco + - const: fsl,imx93-mu-s4 + - const: fsl,imx8ulp-mu-s4 + - items: + - const: fsl,imx93-mu + - const: fsl,imx8ulp-mu + - items: + - enum: + - fsl,imx7s-mu + - fsl,imx8mq-mu + - fsl,imx8mm-mu + - fsl,imx8mn-mu + - fsl,imx8mp-mu + - fsl,imx8qm-mu + - fsl,imx8qxp-mu + - const: fsl,imx6sx-mu + - description: To communicate with i.MX8 SCU with fast IPC + items: + - const: fsl,imx8-mu-scu + - enum: + - fsl,imx8qm-mu + - fsl,imx8qxp-mu + - const: fsl,imx6sx-mu + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: tx + - const: rx + + "#mbox-cells": + description: | + <&phandle type channel> + phandle : Label name of controller + type : Channel type + channel : Channel number + + This MU support 5 type of unidirectional channels, each type + has 4 channels except RST channel which only has 1 channel. + A total of 17 channels. Following types are + supported: + 0 - TX channel with 32bit transmit register and IRQ transmit + acknowledgment support. + 1 - RX channel with 32bit receive register and IRQ support + 2 - TX doorbell channel. Without own register and no ACK support. + 3 - RX doorbell channel. + 4 - RST channel + const: 2 + + clocks: + maxItems: 1 + + fsl,mu-side-b: + description: boolean, if present, means it is for side B MU. + type: boolean + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +allOf: + - if: + properties: + compatible: + enum: + - fsl,imx93-mu-s4 + then: + properties: + interrupt-names: + minItems: 2 + interrupts: + minItems: 2 + + else: + properties: + interrupts: + maxItems: 1 + not: + required: + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt new file mode 100644 index 000000000..3e5b45374 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt @@ -0,0 +1,51 @@ +Hisilicon Hi3660 Mailbox Controller + +Hisilicon Hi3660 mailbox controller supports up to 32 channels. Messages +are passed between processors, including application & communication +processors, MCU, HIFI, etc. Each channel is unidirectional and accessed +by using MMIO registers; it supports maximum to 8 words message. + +Controller +---------- + +Required properties: +- compatible: : Shall be "hisilicon,hi3660-mbox" +- reg: : Offset and length of the device's register set +- #mbox-cells: : Must be 3 + <&phandle channel dst_irq ack_irq> + phandle : Label name of controller + channel : Channel number + dst_irq : Remote interrupt vector + ack_irq : Local interrupt vector + +- interrupts: : Contains the two IRQ lines for mailbox. + +Example: + +mailbox: mailbox@e896b000 { + compatible = "hisilicon,hi3660-mbox"; + reg = <0x0 0xe896b000 0x0 0x1000>; + interrupts = <0x0 0xc0 0x4>, + <0x0 0xc1 0x4>; + #mbox-cells = <3>; +}; + +Client +------ + +Required properties: +- compatible : See the client docs +- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Controller docs above) + +Optional properties +- mbox-names : Name given to channels seen in the 'mboxes' property. + +Example: + +stub_clock: stub_clock@e896b500 { + compatible = "hisilicon,hi3660-stub-clk"; + reg = <0x0 0xe896b500 0x0 0x0100>; + #clock-cells = <1>; + mboxes = <&mailbox 13 3 0>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt new file mode 100644 index 000000000..044b17f3a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt @@ -0,0 +1,74 @@ +Hisilicon Hi6220 Mailbox Driver +=============================== + +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel +is unidirectional with a maximum message size of 8 words. I/O is +performed using register access (there is no DMA) and the cell +raises an interrupt when messages are received. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "hisilicon,hi6220-mbox" +- reg: Contains the mailbox register address range (base + address and length); the first item is for IPC + registers, the second item is shared buffer for + slots. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Must be 3. + <&phandle slot_id dst_irq ack_irq> + phandle: Label name of mailbox controller + slot_id: Slot id used either for TX or RX + dst_irq: IRQ identifier index number which used by MCU + ack_irq: IRQ identifier index number with generating a + TX/RX interrupt to application processor, + mailbox driver uses it to acknowledge interrupt +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the SoCs use. + +Optional Properties: +-------------------- +- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver + use this flag to ask MCU to enable "automatic idle + flag" mode or IRQ generated mode to acknowledge a TX + completion. + +Example: +-------- + + mailbox: mailbox@f7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox */ + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + +Mailbox client +=============== + +Required properties: +-------------------- +- compatible: Many (See the client docs). +- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Mailbox Device Node above). + +Optional Properties: +-------------------- +- mbox-names: Name given to channels seen in the 'mboxes' property. + +Example: +-------- + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mailbox.txt b/Documentation/devicetree/bindings/mailbox/mailbox.txt new file mode 100644 index 000000000..af8ecee2a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mailbox.txt @@ -0,0 +1,60 @@ +* Generic Mailbox Controller and client driver bindings + +Generic binding to provide a way for Mailbox controller drivers to +assign appropriate mailbox channel to client drivers. + +* Mailbox Controller + +Required property: +- #mbox-cells: Must be at least 1. Number of cells in a mailbox + specifier. + +Example: + mailbox: mailbox { + ... + #mbox-cells = <1>; + }; + + +* Mailbox Client + +Required property: +- mboxes: List of phandle and mailbox channel specifiers. + +Optional property: +- mbox-names: List of identifier strings for each mailbox channel. +- shmem : List of phandle pointing to the shared memory(SHM) area between the + users of these mailboxes for IPC, one for each mailbox. This shared + memory can be part of any memory reserved for the purpose of this + communication between the mailbox client and the remote. + + +Example: + pwr_cntrl: power { + ... + mbox-names = "pwr-ctrl", "rpc"; + mboxes = <&mailbox 0 &mailbox 1>; + }; + +Example with shared memory(shmem): + + sram: sram@50000000 { + compatible = "mmio-sram"; + reg = <0x50000000 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x10000>; + + cl_shmem: shmem@0 { + compatible = "client-shmem"; + reg = <0x0 0x200>; + }; + }; + + client@2e000000 { + ... + mboxes = <&mailbox 0>; + shmem = <&cl_shmem>; + .. + }; diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt new file mode 100644 index 000000000..282ab81a4 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt @@ -0,0 +1,16 @@ +* rWTM BIU Mailbox driver for Armada 37xx + +Required properties: +- compatible: must be "marvell,armada-3700-rwtm-mailbox" +- reg: physical base address of the mailbox and length of memory mapped + region +- interrupts: the IRQ line for the mailbox +- #mbox-cells: must be 1 + +Example: + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml new file mode 100644 index 000000000..c579ac074 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Global Command Engine Mailbox + +maintainers: + - Houlong Wei <houlong.wei@mediatek.com> + +description: + The Global Command Engine (GCE) is used to help read/write registers with + critical time limitation, such as updating display configuration during the + vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. + +properties: + compatible: + enum: + - mediatek,mt6779-gce + - mediatek,mt8173-gce + - mediatek,mt8183-gce + - mediatek,mt8186-gce + - mediatek,mt8192-gce + - mediatek,mt8195-gce + + "#mbox-cells": + const: 2 + description: + The first cell describes the Thread ID of the GCE, + the second cell describes the priority of the GCE thread + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Global Command Engine clock + + clock-names: + items: + - const: gce + +required: + - compatible + - "#mbox-cells" + - reg + - interrupts + - clocks + +allOf: + - if: + not: + properties: + compatible: + contains: + const: mediatek,mt8195-gce + then: + required: + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + gce: mailbox@10212000 { + compatible = "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + #mbox-cells = <2>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml new file mode 100644 index 000000000..935937c67 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +properties: + compatible: + const: microchip,mpfs-mailbox + + reg: + oneOf: + - items: + - description: mailbox control & data registers + - description: mailbox interrupt registers + deprecated: true + - items: + - description: mailbox control registers + - description: mailbox interrupt registers + - description: mailbox data registers + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + mbox: mailbox@37020000 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>, + <0x0 0x37020800 0x0 0x100>; + interrupt-parent = <&L1>; + interrupts = <96>; + #mbox-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml new file mode 100644 index 000000000..72c1d9e82 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek ADSP mailbox + +maintainers: + - Allen-KH Cheng <Allen-KH.Cheng@mediatek.com> + +description: | + The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC + to communicate with ADSP by passing messages through two mailbox channels. + The MTK ADSP mailbox IPC also provides the ability for one processor to + signal the other processor using interrupts. + +properties: + compatible: + enum: + - mediatek,mt8195-adsp-mbox + - mediatek,mt8186-adsp-mbox + + "#mbox-cells": + const: 0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - "#mbox-cells" + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + adsp_mailbox0:mailbox@10816000 { + compatible = "mediatek,mt8195-adsp-mbox"; + #mbox-cells = <0>; + reg = <0x10816000 0x1000>; + interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml new file mode 100644 index 000000000..a3e87516d --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/nvidia,tegra186-hsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Hardware Synchronization Primitives (HSP) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The HSP modules are used for the processors to share resources and + communicate together. It provides a set of hardware synchronization + primitives for interprocessor communication. So the interprocessor + communication (IPC) protocols can use hardware synchronization + primitives, when operating between two processors not in an SMP + relationship. + + The features that HSP supported are shared mailboxes, shared + semaphores, arbitrated semaphores and doorbells. + + The mbox specifier of the "mboxes" property in the client node should + contain two cells. The first cell determines the HSP type and the + second cell is used to identify the mailbox that the client is going + to use. + + For shared mailboxes, the first cell composed of two fields: + - bits 15..8: + A bit mask of flags that further specifies the type of shared + mailbox to be used (based on the data size). If no flag is + specified then, 32-bit shared mailbox is used. + - bits 7..0: + Defines the type of the mailbox to be used. This field should be + TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes. + + For doorbells, the second cell specifies the index of the doorbell to + use. + + For shared mailboxes, the second cell is composed of two fields: + - bits 31..24: + A bit mask of flags that further specify how the shared mailbox + will be used. Valid flags are: + - bit 31: + Defines the direction of the mailbox. If set, the mailbox + will be used as a producer (i.e. used to send data). If + cleared, the mailbox is the consumer of data sent by a + producer. + + - bits 23..0: + The index of the shared mailbox to use. The number of available + mailboxes may vary by instance of the HSP block and SoC + generation. + + The following file contains definitions that can be used to + construct mailbox specifiers: + + <dt-bindings/mailbox/tegra186-hsp.h> + +properties: + $nodename: + pattern: "^hsp@[0-9a-f]+$" + + compatible: + oneOf: + - const: nvidia,tegra186-hsp + - const: nvidia,tegra194-hsp + - items: + - const: nvidia,tegra234-hsp + - const: nvidia,tegra194-hsp + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 9 + + interrupt-names: + oneOf: + # shared interrupts are optional + - items: + - const: doorbell + + - items: + - const: doorbell + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + + - items: + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + + "#mbox-cells": + const: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/tegra186-hsp.h> + + hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x03c00000 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; + }; + + client { + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_CCPLEX>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml new file mode 100644 index 000000000..f24fd84b4 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm APCS global block bindings + +description: + This binding describes the APCS "global" block found in various Qualcomm + platforms. + +maintainers: + - Jassi Brar <jassisinghbrar@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,ipq6018-apcs-apps-global + - qcom,ipq8074-apcs-apps-global + - qcom,msm8976-apcs-kpss-global + - qcom,msm8996-apcs-hmss-global + - qcom,msm8998-apcs-hmss-global + - qcom,qcm2290-apcs-hmss-global + - qcom,sc7180-apss-shared + - qcom,sc8180x-apss-shared + - qcom,sdm660-apcs-hmss-global + - qcom,sdm845-apss-shared + - qcom,sm6125-apcs-hmss-global + - qcom,sm6115-apcs-hmss-global + - qcom,sm8150-apss-shared + - items: + - enum: + - qcom,msm8916-apcs-kpss-global + - qcom,msm8939-apcs-kpss-global + - qcom,msm8953-apcs-kpss-global + - qcom,msm8994-apcs-kpss-global + - qcom,qcs404-apcs-apps-global + - const: syscon + reg: + maxItems: 1 + + clocks: + description: phandles to the parent clocks of the clock driver + minItems: 2 + maxItems: 3 + + '#mbox-cells': + const: 1 + + '#clock-cells': + enum: [0, 1] + + clock-names: + minItems: 2 + maxItems: 3 + +required: + - compatible + - reg + - '#mbox-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + enum: + - qcom,msm8916-apcs-kpss-global + - qcom,msm8994-apcs-kpss-global + - qcom,msm8996-apcs-hmss-global + - qcom,msm8998-apcs-hmss-global + - qcom,qcs404-apcs-apps-global + - qcom,sc7180-apss-shared + - qcom,sdm660-apcs-hmss-global + - qcom,sdm845-apss-shared + - qcom,sm6125-apcs-hmss-global + - qcom,sm8150-apss-shared + then: + properties: + clocks: + items: + - description: primary pll parent of the clock driver + - description: auxiliary parent + clock-names: + items: + - const: pll + - const: aux + - if: + properties: + compatible: + enum: + - qcom,sdx55-apcs-gcc + then: + properties: + clocks: + items: + - description: primary pll parent of the clock driver + - description: auxiliary parent + - description: reference clock + clock-names: + items: + - const: pll + - const: aux + - const: ref + - if: + properties: + compatible: + enum: + - qcom,ipq6018-apcs-apps-global + - qcom,ipq8074-apcs-apps-global + then: + properties: + clocks: + items: + - description: primary pll parent of the clock driver + - description: XO clock + clock-names: + items: + - const: pll + - const: xo + - if: + properties: + compatible: + enum: + - qcom,ipq6018-apcs-apps-global + - qcom,ipq8074-apcs-apps-global + then: + properties: + '#clock-cells': + const: 1 + else: + properties: + '#clock-cells': + const: 0 + +examples: + + # Example apcs with msm8996 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x9820000 0x1000>; + + #mbox-cells = <1>; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + mbox-names = "rpm_hlos"; + }; + + # Example apcs with qcs404 + - | + #define GCC_APSS_AHB_CLK_SRC 1 + #define GCC_GPLL0_AO_OUT_MAIN 123 + apcs: mailbox@b011000 { + compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml new file mode 100644 index 000000000..baca4786f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + The Inter-Processor Communication Controller (IPCC) is a centralized hardware + to route interrupts across various subsystems. It involves a three-level + addressing scheme called protocol, client and signal. For example, consider an + entity on the Application Processor Subsystem (APSS) that wants to listen to + Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such + a case, the client would be Modem (client-id is 2) and the signal would be + SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC) + protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h + for the list of such IDs. + +properties: + compatible: + items: + - enum: + - qcom,sm6350-ipcc + - qcom,sm6375-ipcc + - qcom,sm8250-ipcc + - qcom,sm8350-ipcc + - qcom,sm8450-ipcc + - qcom,sc7280-ipcc + - const: qcom,ipcc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: + The first cell is the client-id, the second cell is the signal-id and the + third cell is the interrupt type. + + "#mbox-cells": + const: 2 + description: + The first cell is the client-id, and the second cell is the signal-id. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0x408000 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt new file mode 100644 index 000000000..b6bb84acf --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt @@ -0,0 +1,32 @@ +Rockchip mailbox + +The Rockchip mailbox is used by the Rockchip CPU cores to communicate +requests to MCU processor. + +Refer to ./mailbox.txt for generic information about mailbox device-tree +bindings. + +Required properties: + + - compatible: should be one of the following. + - "rockchip,rk3368-mbox" for rk3368 + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be 1 + +Example: +-------- + +/* RK3368 */ +mbox: mbox@ff6b0000 { + compatible = "rockchip,rk3368-mailbox"; + reg = <0x0 0xff6b0000 0x0 0x1000>, + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml new file mode 100644 index 000000000..80feba82c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Spreadtrum mailbox controller bindings + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,sc9860-mailbox + - sprd,sc9863a-mailbox + + reg: + items: + - description: inbox registers' base address + - description: outbox registers' base address + + interrupts: + minItems: 2 + maxItems: 3 + + interrupt-names: + minItems: 2 + items: + - const: inbox + - const: outbox + - const: supp-outbox + + clocks: + maxItems: 1 + + clock-names: + items: + - const: enable + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - "#mbox-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox: mailbox@400a0000 { + compatible = "sprd,sc9860-mailbox"; + reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>; + #mbox-cells = <1>; + clock-names = "enable"; + clocks = <&aon_gate 53>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "inbox", "outbox"; + }; +... diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml new file mode 100644 index 000000000..2c8b47285 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 IPC controller bindings + +description: + The IPCC block provides a non blocking signaling mechanism to post and + retrieve messages in an atomic way between two processors. + It provides the signaling for N bidirectionnal channels. The number of + channels (N) can be read from a dedicated register. + +maintainers: + - Fabien Dessenne <fabien.dessenne@foss.st.com> + - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> + +properties: + compatible: + const: st,stm32mp1-ipcc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + items: + - description: rx channel occupied + - description: tx channel free + + interrupt-names: + items: + - const: rx + - const: tx + + wakeup-source: true + + "#mbox-cells": + const: 1 + + st,proc-id: + description: Processor id using the mailbox (0 or 1) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + +required: + - compatible + - reg + - st,proc-id + - clocks + - interrupt-names + - "#mbox-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + ipcc: mailbox@4c001000 { + compatible = "st,stm32mp1-ipcc"; + #mbox-cells = <1>; + reg = <0x4c001000 0x400>; + st,proc-id = <0>; + interrupts-extended = <&exti 61 1>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + clocks = <&rcc_clk IPCC>; + wakeup-source; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt b/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt new file mode 100644 index 000000000..351f61267 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt @@ -0,0 +1,51 @@ +ST Microelectronics Mailbox Driver + +Each ST Mailbox IP currently consists of 4 instances of 32 channels. Messages +are passed between Application and Remote processors using shared memory. + +Controller +---------- + +Required properties: +- compatible : Should be "st,stih407-mailbox" +- reg : Offset and length of the device's register set +- mbox-name : Name of the mailbox +- #mbox-cells: : Must be 2 + <&phandle instance channel direction> + phandle : Label name of controller + instance : Instance number + channel : Channel number + +Optional properties +- interrupts : Contains the IRQ line for a Rx mailbox + +Example: + +mailbox0: mailbox@0 { + compatible = "st,stih407-mailbox"; + reg = <0x08f00000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>; + #mbox-cells = <2>; + mbox-name = "a9"; +}; + +Client +------ + +Required properties: +- compatible : Many (See the client docs) +- reg : Shared (between Application and Remote) memory address +- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Controller docs above) + +Optional properties +- mbox-names : Name given to channels seen in the 'mboxes' property. + +Example: + +mailbox_test { + compatible = "mailbox-test"; + reg = <0x[shared_memory_address], [shared_memory_size]>; + mboxes = <&mailbox2 0 1>, <&mailbox0 2 1>; + mbox-names = "tx", "rx"; +}; diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt new file mode 100644 index 000000000..ebf0e3710 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt @@ -0,0 +1,50 @@ +Texas Instruments' Message Manager Driver +======================================== + +The Texas Instruments' Message Manager is a mailbox controller that has +configurable queues selectable at SoC(System on Chip) integration. The Message +manager is broken up into queues in different address regions that are called +"proxies" - each instance is unidirectional and is instantiated at SoC +integration level to indicate receive or transmit path. + +Message Manager Device Node: +=========================== +Required properties: +-------------------- +- compatible: Shall be: "ti,k2g-message-manager" +- reg-names queue_proxy_region - Map the queue proxy region. + queue_state_debug_region - Map the queue state debug + region. +- reg: Contains the register map per reg-names. +- #mbox-cells Shall be 2. Contains the queue ID and proxy ID in that + order referring to the transfer path. +- interrupt-names: Contains interrupt names matching the rx transfer path + for a given SoC. Receive interrupts shall be of the + format: "rx_<QID>". + For ti,k2g-message-manager, this shall contain: + "rx_005", "rx_057" +- interrupts: Contains the interrupt information corresponding to + interrupt-names property. + +Example(K2G): +------------ + + msgmgr: msgmgr@2a00000 { + compatible = "ti,k2g-message-manager"; + #mbox-cells = <2>; + reg-names = "queue_proxy_region", "queue_state_debug_region"; + reg = <0x02a00000 0x400000>, <0x028c3400 0x400>; + interrupt-names = "rx_005", "rx_057"; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmmc: pmmc { + [...] + mbox-names = "rx", "tx"; + # RX queue ID is 5, proxy ID is 2 + # TX queue ID is 0, proxy ID is 0 + mboxes= <&msgmgr 5 2>, + <&msgmgr 0 0>; + [...] + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml new file mode 100644 index 000000000..d433e496e --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml @@ -0,0 +1,299 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP2+ and K3 Mailbox devices + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + The OMAP Mailbox hardware facilitates communication between different + processors using a queued mailbox interrupt mechanism. The IP block is + external to the various processor subsystems and is connected on an + interconnect bus. The communication is achieved through a set of registers + for message storage and interrupt configuration registers. + + Each mailbox IP block/cluster has a certain number of h/w fifo queues and + output interrupt lines. An output interrupt line is routed to an interrupt + controller within a processor subsystem, and there can be more than one line + going to a specific processor's interrupt controller. The interrupt line + connections are fixed for an instance and are dictated by the IP integration + into the SoC (excluding the SoCs that have an Interrupt Crossbar or an + Interrupt Router IP). Each interrupt line is programmable through a set of + interrupt configuration registers, and have a rx and tx interrupt source per + h/w fifo. Communication between different processors is achieved through the + appropriate programming of the rx and tx interrupt sources on the appropriate + interrupt lines. + + The number of h/w fifo queues and interrupt lines dictate the usable + registers. All the current OMAP SoCs except for the newest DRA7xx SoC has a + single IP instance. DRA7xx has multiple instances with different number of + h/w fifo queues and interrupt lines between different instances. The interrupt + lines can also be routed to different processor sub-systems on DRA7xx as they + are routed through the Crossbar, a kind of interrupt router/multiplexer. The + K3 AM65x, J721E and J7200 SoCs has each of these instances form a cluster and + combine multiple clusters into a single IP block present within the Main + NavSS. The interrupt lines from all these clusters are multiplexed and routed + to different processor subsystems over a limited number of common interrupt + output lines of an Interrupt Router. The AM64x SoCS also uses a single IP + block comprising of multiple clusters, but the number of clusters are + smaller, and the interrupt output lines are connected directly to various + processors. + + Mailbox Controller Nodes + ========================= + A Mailbox device node is used to represent a Mailbox IP instance/cluster + within a SoC. The sub-mailboxes (actual communication channels) are + represented as child nodes of this parent node. + + Mailbox Users + ============== + A device needing to communicate with a target processor device should specify + them using the common mailbox binding properties, "mboxes" and the optional + "mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt + for details). Each value of the mboxes property should contain a phandle to + the mailbox controller device node and an args specifier that will be the + phandle to the intended sub-mailbox child node to be used for communication. + The equivalent "mbox-names" property value can be used to give a name to the + communication channel to be used by the client user. + +$defs: + omap-mbox-descriptor: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + The omap-mbox-descriptor is made of up of 3 cells and represents a single + uni-directional communication channel. A typical sub-mailbox device uses + two such channels - one for transmitting (Tx) and one for receiving (Rx). + items: + - description: + mailbox fifo id used either for transmitting on ti,mbox-tx channel or + for receiving on ti,mbox-rx channel (fifo_id). This is the hardware + fifo number within a mailbox cluster. + - description: + irq identifier index number to use from the parent's interrupts data. + Should be 0 for most of the cases, a positive index value is seen only + on mailboxes that have multiple interrupt lines connected to the MPU + processor (irq_id). This is an index number in the listed interrupts + property in the DT nodes. + - description: + mailbox user id for identifying the interrupt line associated with + generating a tx/rx fifo interrupt (usr_id). This is the hardware + user id number within a mailbox cluster. + + omap-sub-mailbox: + type: object + description: + The omap-sub-mailbox is a child node within a Mailbox controller device + node and represents the actual communication channel used to send and + receive messages between the host processor and a remote processor. Each + child node should have a unique node name across all the different mailbox + device nodes. + + properties: + ti,mbox-tx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Tx fifo. + + ti,mbox-rx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Rx fifo. + + ti,mbox-send-noirq: + type: boolean + description: + Quirk flag to allow the client user of this sub-mailbox to send + messages without triggering a Tx ready interrupt, and to control + the Tx ticker. Should be used only on sub-mailboxes used to + communicate with WkupM3 remote processor on AM33xx/AM43xx SoCs. + + required: + - ti,mbox-tx + - ti,mbox-rx + +properties: + compatible: + enum: + - ti,omap2-mailbox # for OMAP2420, OMAP2430 SoCs + - ti,omap3-mailbox # for OMAP3430, OMAP3630 SoCs + - ti,omap4-mailbox # for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs + - ti,am654-mailbox # for K3 AM65x, J721E and J7200 SoCs + - ti,am64-mailbox # for K3 AM64x SoCs + + reg: + maxItems: 1 + + interrupts: + description: + Contains the interrupt information for the mailbox device. The format is + dependent on which interrupt controller the Mailbox device uses. The + number of interrupts listed will at most be the value specified in + ti,mbox-num-users property, but is usually limited by the number of + interrupts reaching the main processor. An interrupt-parent property + is required on SoCs where the interrupt lines are connected through a + Interrupt Router before reaching the main processor's GIC. + + "#mbox-cells": + const: 1 + description: + The specifier is a phandle to an omap-sub-mailbox device. + + ti,mbox-num-users: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of targets (processor devices) that the mailbox device can + interrupt. + + ti,mbox-num-fifos: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of h/w fifo queues within the mailbox IP block. + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + description: + Name of the hwmod associated with the mailbox. This should be defined + in the mailbox node only if the node is not defined as a child node of + a corresponding sysc interconnect node. + + This property is only needed on some legacy OMAP SoCs which have not + yet been converted to the ti,sysc interconnect hierarachy, but is + otherwise considered obsolete. + +patternProperties: + "^mbox-[a-z0-9-]+$": + $ref: "#/$defs/omap-sub-mailbox" + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - ti,mbox-num-users + - ti,mbox-num-fifos + +allOf: + - if: + properties: + compatible: + enum: + - ti,am654-mailbox + - ti,am64-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 16 + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap4-mailbox + then: + properties: + ti,mbox-num-users: + enum: [3, 4] + ti,mbox-num-fifos: + enum: [8, 12] + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap3-mailbox + then: + properties: + ti,mbox-num-users: + const: 2 + ti,mbox-num-fifos: + const: 2 + interrupts: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + enum: + - ti,omap2-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 6 + interrupts: + minItems: 1 + maxItems: 2 + +additionalProperties: false + +examples: + - | + /* OMAP4 */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + + mbox_ipu: mbox-ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox-dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + + dsp { + mboxes = <&mailbox &mbox_dsp>; + }; + + - | + /* AM33xx */ + mailbox1: mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480c8000 0x200>; + interrupts = <77>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + + mbox_wkupm3: mbox-wkup-m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + ti,mbox-send-noirq; + }; + }; + + - | + /* AM65x */ + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x31f80000 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml new file mode 100644 index 000000000..eea822861 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/ti,secure-proxy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' Secure Proxy + +maintainers: + - Nishanth Menon <nm@ti.com> + +description: | + The Texas Instruments' secure proxy is a mailbox controller that has + configurable queues selectable at SoC(System on Chip) integration. The + Message manager is broken up into different address regions that are + called "threads" or "proxies" - each instance is unidirectional and is + instantiated at SoC integration level by system controller to indicate + receive or transmit path. + +properties: + $nodename: + pattern: "^mailbox@[0-9a-f]+$" + + compatible: + const: ti,am654-secure-proxy + + "#mbox-cells": + const: 1 + description: + Contains the secure proxy thread ID used for the specific transfer path. + + reg-names: + items: + - const: target_data + - const: rt + - const: scfg + + reg: + minItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 100 + items: + pattern: "^rx_[0-9]{3}$" + description: + Contains the interrupt name information for the Rx interrupt path for + secure proxy thread in the form 'rx_<PID>'. + + interrupts: + minItems: 1 + maxItems: 100 + description: + Contains the interrupt information for the Rx interrupt path for secure + proxy. + +required: + - compatible + - reg-names + - reg + - interrupt-names + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + secure_proxy: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x32c00000 0x100000>, + <0x32400000 0x100000>, + <0x32800000 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt new file mode 100644 index 000000000..e46451bb2 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt @@ -0,0 +1,35 @@ +The APM X-Gene SLIMpro mailbox is used to communicate messages between +the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple +interrupt based door bell mechanism and can exchange simple messages using the +internal registers. + +There are total of 8 interrupts in this mailbox. Each used for an individual +door bell (or mailbox channel). + +Required properties: +- compatible: Should be as "apm,xgene-slimpro-mbox". + +- reg: Contains the mailbox register address range. + +- interrupts: 8 interrupts must be from 0 to 7, interrupt 0 define the + the interrupt for mailbox channel 0 and interrupt 1 for + mailbox channel 1 and so likewise for the reminder. + +- #mbox-cells: only one to specify the mailbox channel number. + +Example: + +Mailbox Node: + mailbox: mailbox@10540000 { + compatible = "apm,xgene-slimpro-mbox"; + reg = <0x0 0x10540000 0x0 0xa000>; + #mbox-cells = <1>; + interrupts = <0x0 0x0 0x4>, + <0x0 0x1 0x4>, + <0x0 0x2 0x4>, + <0x0 0x3 0x4>, + <0x0 0x4 0x4>, + <0x0 0x5 0x4>, + <0x0 0x6 0x4>, + <0x0 0x7 0x4>, + }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml new file mode 100644 index 000000000..2193141dd --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xilinx IPI(Inter Processor Interrupt) mailbox controller + +description: | + The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage + messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI + agent owns registers used for notification and buffers for message. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ + TF-A | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | + Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + +maintainers: + - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + +properties: + compatible: + const: xlnx,zynqmp-ipi-mailbox + + method: + description: | + The method of calling the PM-API firmware layer. + Permitted values are. + - "smc" : SMC #0, following the SMCCC + - "hvc" : HVC #0, following the SMCCC + + $ref: /schemas/types.yaml#/definitions/string + enum: + - smc + - hvc + default: smc + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + xlnx,ipi-id: + description: | + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + interrupts: + maxItems: 1 + + ranges: true + +patternProperties: + '^mailbox@[0-9a-f]+$': + description: Internal ipi mailbox node + type: object # DT nodes are json objects + properties: + xlnx,ipi-id: + description: + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + '#mbox-cells': + const: 1 + description: + It contains tx(0) or rx(1) channel IPI id number. + + reg: + maxItems: 4 + + reg-names: + items: + - const: local_request_region + - const: local_response_region + - const: remote_request_region + - const: remote_response_region + + required: + - reg + - reg-names + - "#mbox-cells" + +additionalProperties: false + +required: + - compatible + - interrupts + - '#address-cells' + - '#size-cells' + - xlnx,ipi-id + +examples: + - | + #include<dt-bindings/interrupt-controller/arm-gic.h> + + amba { + #address-cells = <0x2>; + #size-cells = <0x2>; + zynqmp-mailbox { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + xlnx,ipi-id = <0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mailbox: mailbox@ff9905c0 { + reg = <0x0 0xff9905c0 0x0 0x20>, + <0x0 0xff9905e0 0x0 0x20>, + <0x0 0xff990e80 0x0 0x20>, + <0x0 0xff990ea0 0x0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + }; + }; + +... |