diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-385-synology-ds116.dts')
| -rw-r--r-- | arch/arm/boot/dts/armada-385-synology-ds116.dts | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts new file mode 100644 index 000000000..2622af73c --- /dev/null +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Synology DS116 NAS + * + * Copyright (C) 2017 Willy Tarreau <w@1wt.eu> + */ + +/dts-v1/; +#include "armada-385.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Synology DS116"; + compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + serial@12000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + serial@12100 { + /* A PIC16F1829 is connected to uart1 at 9600 bps, + * and takes single-character orders : + * "1" : power off // already handled by the poweroff node + * "2" : short beep + * "3" : long beep + * "4" : turn the power LED ON + * "5" : flash the power LED + * "6" : turn the power LED OFF + * "7" : turn the status LED OFF + * "8" : turn the status LED ON + * "9" : flash the status LED + * "A" : flash the motherboard LED (D8) + * "B" : turn the motherboard LED OFF + * "C" : hard reset + */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + }; + + poweroff@12100 { + compatible = "synology,power-off"; + reg = <0x12100 0x100>; + clocks = <&coreclk 0>; + }; + + ethernet@70000 { + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + status = "okay"; + }; + + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + sata@a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata0_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata0>; + }; + }; + + bm@c8000 { + status = "okay"; + }; + + usb3@f0000 { + usb-phy = <&usb3_0_phy>; + status = "okay"; + }; + + usb3@f8000 { + usb-phy = <&usb3_1_phy>; + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>, + <&gpio1 17 GPIO_ACTIVE_HIGH>, + <&gpio1 16 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 1500 1 + 2500 2 + 3000 3 + 3400 4 + 3700 5 + 3900 6 + 4000 7>; + #cooling-cells = <2>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* The green part is on gpio0.20 which is also used by + * sata0, and accesses to SATA disk 0 make it blink so it + * doesn't need to be declared here. + */ + orange { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + label = "ds116:orange:disk"; + default-state = "off"; + }; + }; + }; + + usb3_0_phy: usb3_0_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_0_vbus>; + #phy-cells = <0>; + }; + + usb3_1_phy: usb3_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_1_vbus>; + #phy-cells = <0>; + }; + + reg_usb3_0_vbus: usb3-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus0"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + reg_usb3_1_vbus: usb3-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus1"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci1_vbus_pins>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-boot-on; + gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "macronix,mx25l6405d", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + /* Note: there is a redboot partition table despite u-boot + * being used. The names presented here are the same as those + * found in the FIS directory. There is also a small device + * tree in the last 64kB of the RedBoot partition which is not + * enumerated. The MAC address and the serial number are listed + * in the "vendor" partition. + */ + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x000f0000>; + read-only; + }; + + partition@c0000 { + label = "zImage"; + reg = <0x000f0000 0x002d0000>; + }; + + partition@390000 { + label = "rd.gz"; + reg = <0x003c0000 0x00410000>; + }; + + partition@7d0000 { + label = "vendor"; + reg = <0x007d0000 0x00010000>; + read-only; + }; + + partition@7e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + + partition@7f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; + read-only; + }; + }; +}; + +&pinctrl { + /* use only one pin for UART1, as mpp20 is used by sata0 */ + uart1_pins: uart-pins-1 { + marvell,pins = "mpp19"; + marvell,function = "ua1"; + }; + + xhci0_vbus_pins: xhci0_vbus_pins { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + xhci1_vbus_pins: xhci1_vbus_pins { + marvell,pins = "mpp59"; + marvell,function = "gpio"; + }; +}; |