diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-388-gp.dts')
| -rw-r--r-- | arch/arm/boot/dts/armada-388-gp.dts | 406 |
1 files changed, 406 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts new file mode 100644 index 000000000..e2ba50520 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -0,0 +1,406 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Marvell Armada 385 development board + * (RD-88F6820-GP) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 388 DB-88F6820-GP"; + compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + + expander0: pca9555@20 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + pinctrl-0 = <&pca0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20>; + }; + + expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x21>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + serial@12000 { + /* + * Exported on the micro USB connector CON16 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + /* GE1 CON15 */ + ethernet@30000 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + }; + + /* CON4 */ + usb@58000 { + vcc-supply = <®_usb2_0_vbus>; + status = "okay"; + }; + + /* GE0 CON1 */ + ethernet@70000 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + }; + + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + + sata@a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata0_pins>, <&sata1_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata0>; + }; + + sata1: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata1>; + }; + }; + + bm@c8000 { + status = "okay"; + }; + + sata@e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata2_pins>, <&sata3_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata2: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata2>; + }; + + sata3: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata3>; + }; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + no-1-8-v; + /* + * A388-GP board v1.5 and higher replace + * hitherto card detection method based on GPIO + * with the one using DAT3 pin. As they are + * incompatible, software-based polling is + * enabled with 'broken-cd' property. For boards + * older than v1.5 it can be replaced with: + * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;', + * whereas for the newer ones following can be + * used instead: + * 'dat3-cd;' + * 'cd-inverted;' + */ + broken-cd; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + /* CON5 */ + usb3@f0000 { + usb-phy = <&usb2_1_phy>; + status = "okay"; + }; + + /* CON7 */ + usb3@f8000 { + usb-phy = <&usb3_phy>; + status = "okay"; + }; + }; + + bm-bppi { + status = "okay"; + }; + + pcie { + status = "okay"; + /* + * One PCIe units is accessible through + * standard PCIe slot on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * The two other PCIe units are accessible + * through mini PCIe slot on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 3000 1>; + }; + }; + + usb2_1_phy: usb2_1_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb2_1_vbus>; + #phy-cells = <0>; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + #phy-cells = <0>; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_0_vbus: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander1 14 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_1_vbus: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-boot-on; + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; + + reg_sata1: pwr-sata1 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-boot-on; + gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata1>; + }; + + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata1>; + }; + + reg_sata2: pwr-sata2 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata2"; + enable-active-high; + regulator-boot-on; + gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata2: v5-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata2>; + }; + + reg_12v_sata2: v12-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata2>; + }; + + reg_sata3: pwr-sata3 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata3"; + enable-active-high; + regulator-boot-on; + gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata3: v5-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata3>; + }; + + reg_12v_sata3: v12-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata3"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata3>; + }; +}; + +&pinctrl { + pca0_pins: pca0_pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; |