diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-xp-mv78260.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/armada-xp-mv78260.dtsi | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi new file mode 100644 index 000000000..6c6fbb9fa --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * Contains definitions specific to the Armada XP MV78260 SoC that are not + * common to all Armada XP SoCs. + */ + +#include "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78260 SoC"; + compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + clock-latency = <1000000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + clock-latency = <1000000>; + }; + }; + + soc { + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4 only. + */ + pciec: pcie@82000000 { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + + pcie1: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 58>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 0>, + <0 0 0 2 &pcie1_intc 1>, + <0 0 0 3 &pcie1_intc 2>, + <0 0 0 4 &pcie1_intc 3>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + + pcie1_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie2: pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 59>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 0>, + <0 0 0 2 &pcie2_intc 1>, + <0 0 0 3 &pcie2_intc 2>, + <0 0 0 4 &pcie2_intc 3>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + + pcie2_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie3: pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 60>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3_intc 0>, + <0 0 0 2 &pcie3_intc 1>, + <0 0 0 3 &pcie3_intc 2>, + <0 0 0 4 &pcie3_intc 3>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + + pcie3_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie4: pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 61>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie4_intc 0>, + <0 0 0 2 &pcie4_intc 1>, + <0 0 0 3 &pcie4_intc 2>, + <0 0 0 4 &pcie4_intc 3>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + + pcie4_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie5: pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 62>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie5_intc 0>, + <0 0 0 2 &pcie5_intc 1>, + <0 0 0 3 &pcie5_intc 2>, + <0 0 0 4 &pcie5_intc 3>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + + pcie5_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie6: pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 63>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie6_intc 0>, + <0 0 0 2 &pcie6_intc 1>, + <0 0 0 3 &pcie6_intc 2>, + <0 0 0 4 &pcie6_intc 3>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + + pcie6_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie7: pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 64>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie7_intc 0>, + <0 0 0 2 &pcie7_intc 1>, + <0 0 0 3 &pcie7_intc 2>, + <0 0 0 4 &pcie7_intc 3>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + + pcie7_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie8: pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 65>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie8_intc 0>, + <0 0 0 2 &pcie8_intc 1>, + <0 0 0 3 &pcie8_intc 2>, + <0 0 0 4 &pcie8_intc 3>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + + pcie8_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + pcie9: pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-names = "intx"; + interrupts-extended = <&mpic 99>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + bus-range = <0x00 0xff>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie9_intc 0>, + <0 0 0 2 &pcie9_intc 1>, + <0 0 0 3 &pcie9_intc 2>, + <0 0 0 4 &pcie9_intc 3>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + + pcie9_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + internal-regs { + gpio0: gpio@18100 { + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; + }; + + gpio1: gpio@18140 { + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; + }; + + gpio2: gpio@18180 { + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <91>; + }; + + eth3: ethernet@34000 { + compatible = "marvell,armada-xp-neta"; + reg = <0x34000 0x4000>; + interrupts = <14>; + clocks = <&gateclk 1>; + status = "disabled"; + }; + }; + }; +}; + +&pinctrl { + compatible = "marvell,mv78260-pinctrl"; +}; |