diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts')
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts | 569 |
1 files changed, 569 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts new file mode 100644 index 000000000..8f543cca7 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for Lenovo Hr630 platform + * + * Copyright (C) 2019-present Lenovo + */ + +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HR630 BMC"; + compatible = "lenovo,hr630-bmc", "aspeed,ast2500"; + + aliases { + i2c14 = &i2c_rbp; + i2c15 = &i2c_fbp1; + i2c16 = &i2c_fbp2; + i2c17 = &i2c_fbp3; + i2c18 = &i2c_riser2; + i2c19 = &i2c_pcie4; + i2c20 = &i2c_riser1; + i2c21 = &i2c_ocp; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=tty0 console=ttyS4,115200 earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x00100000>; /* 1M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, + <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default>; +}; + +&i2c0 { + status = "okay"; + /* temp1 inlet */ + tmp75@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; +}; + +&i2c1 { + status = "okay"; + /* temp2 outlet */ + tmp75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + + i2c-switch@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@70 next. */ + + i2c_rbp: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_fbp1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_fbp2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_fbp3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + i2c-switch@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@76 next. */ + + i2c_riser2: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_pcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_riser1: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_ocp: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + eeprom@57 { + compatible = "atmel,24c256"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@12 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@13 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; +}; + +&gpio { + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + + pin_gpio_f0 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "IRQ_BMC_PCH_NMI_R"; + }; + + pin_gpio_f3 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS0_RST_OUT_N"; + }; + + pin_gpio_f4 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT0_FAULT_LED"; + }; + + pin_gpio_f5 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT1_FAULT_LED"; + }; + + pin_gpio_g4 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FAN_PWR_CTL_N"; + }; + + pin_gpio_g7 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_PCIE_I2CMUX_N"; + }; + + pin_gpio_h2 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU1_FFS_N_R"; + }; + + pin_gpio_h3 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU2_FFS_N_R"; + }; + + pin_gpio_i3 { + gpio-hog; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_INTRUDED_COVER"; + }; + + pin_gpio_j2 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_BIOS_UPDATE_N"; + }; + + pin_gpio_j3 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_HDD_I2CMUX_N"; + }; + + pin_gpio_s2 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_VGA_SW"; + }; + + pin_gpio_s4 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + output; + line-name = "VBAT_EN_N"; + }; + + pin_gpio_s6 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PU_BMC_GPIOS6"; + }; + + pin_gpio_y0 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S0"; + }; + + pin_gpio_y1 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S1"; + }; + + pin_gpio_z0 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_INT_N"; + }; + + pin_gpio_z2 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_RESET_N"; + }; + + pin_gpio_z3 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_PCH_SCI_LPC_N"; + }; + + pin_gpio_z7 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_POST_CMPLT_N"; + }; + + pin_gpio_aa0 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "HOST_BMC_USB_SEL"; + }; + + pin_gpio_aa5 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS1_RST_OUT_N"; + }; + +}; |