diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 413 |
1 files changed, 413 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi new file mode 100644 index 000000000..37697fac9 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +// +// Device Tree Source for General Electric B1x5Pv2 +// patient monitor series +// +// Copyright 2018-2021 General Electric Company +// Copyright 2018-2021 Collabora + +#include <dt-bindings/input/input.h> +#include "imx6dl-qmx6.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + /* Do not allow frequencies above 800MHz */ + cpus { + cpu@0 { + operating-points = < + /* kHz uV */ + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 792000 1175000 + 396000 1175000 + >; + }; + + cpu@1 { + operating-points = < + /* kHz uV */ + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 792000 1175000 + 396000 1175000 + >; + }; + }; + + reg_syspwr: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "SYS_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + reg_5v_pmc: regulator-5v-pmc { + compatible = "regulator-fixed"; + regulator-name = "5V PMC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_syspwr>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_syspwr>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_syspwr>; + }; + + reg_5v0_audio: regulator-5v0-audio { + compatible = "regulator-fixed"; + regulator-name = "5V0_AUDIO"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v>; + gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * This must be always-on for da7212, which has some not + * properly documented dependencies for it's speaker supply + * pin. The issue manifests as speaker volume being very low. + */ + regulator-always-on; + }; + + + reg_3v3_audio: regulator-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "3V3_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_3v3>; + pinctrl-0 = <&pinctrl_q7_hda_reset>; + pinctrl-names = "default"; + gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_2v5_audio: regulator-2v5-audio { + compatible = "regulator-fixed"; + regulator-name = "2V5_AUDIO"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <®_3v3_audio>; + + }; + + reg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + regulator-name = "WLAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_sdio_power>; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <70000>; + }; + + reg_bl: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "LED_VCC"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_syspwr>; + pinctrl-0 = <&pinctrl_q7_lcd_power>; + pinctrl-names = "default"; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "LCD_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v>; + }; + + usb_power: regulator-usb-power { + compatible = "regulator-fixed"; + regulator-name = "USB POWER"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v>; + }; + + charger: battery-charger { + compatible = "gpio-charger"; /* ti,bq24172 */ + charger-type = "mains"; + gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>; + charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>, + <&tca6424a 12 GPIO_ACTIVE_HIGH>; + charge-current-limit-mapping = <1300000 0x0>, + <700000 0x1>, + <0 0x2>; + charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>; + }; + + poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_spi_cs1>; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + }; + + power-button-key { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_sleep_button>; + + power-button { + label = "power button"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + }; + + rotary-encoder-key { + compatible = "gpio-keys"; + + rotary-encoder-event { + label = "rotary-encoder press"; + gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_ENTER>; + linux,can-disable; + }; + }; + + rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>; + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>; + rotary-encoder,relative-axis; + rotary-encoder,steps-per-period = <2>; + wakeup-source; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>; + + led-alarm1 { + label = "alarm:red"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + + led-alarm2 { + label = "alarm:yellow"; + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + }; + + led-alarm3 { + label = "alarm:blue"; + gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_backlight_enable>; + power-supply = <®_bl>; + pwms = <&pwm4 0 5000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <179>; + enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + panel { + backlight = <&backlight>; + power-supply = <®_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = "Speaker", "Ext Spk"; + simple-audio-card,audio-routing = "Ext Spk", "LINE"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; +}; + +&audmux { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + battery: battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>; + sbs,i2c-retry-count = <5>; + power-supplies = <&charger>; + }; + + codec: audio-codec@1a { + compatible = "dlg,da7212"; + reg = <0x1a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_2v5_audio>; + VDDSP-supply = <®_5v0_audio>; + VDDMIC-supply = <®_3v3_audio>; + VDDIO-supply = <®_3v3_audio>; + clocks = <&clk_ext_audio_codec>; + clock-names = "mclk"; + }; +}; + +&i2c5 { + tca6424a: gpio-controller@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + interrupt-parent = <&gpio7>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio6>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN", + "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF", + "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0", + "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "", + "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", + "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2"; + + }; + + tmp75: temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + vs-supply = <®_3v3>; + interrupt-parent = <&tca6424a>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm4 { + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <&usb_power>; + disable-over-current; + dr_mode = "host"; + status = "okay"; + + /* + * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N. + * On QMX6 this is not connceted to the i.MX6, but to the USB Hub + * from &usbh1. This means, that we cannot easily detect and handle + * over-current events. Fortunately the regulator limits the current + * automatically, so the hardware is still protected. + */ +}; + +&usdhc4 { + /* WiFi module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + vmmc-supply = <®_wlan>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_q7_gpio7>; + + interrupt-parent = <&gpio4>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + + tcxo-clock-frequency = <26000000>; + }; +}; |