diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 385 |
1 files changed, 385 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts new file mode 100644 index 000000000..864dc5018 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 Eckelmann AG. + * Copyright (C) 2013 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "imx6dl.dtsi" + +/ { + model = "Eckelmann CI 4X10 Board"; + compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl"; + + chosen { + stdout-path = &uart3; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + rmii_clk: clock-rmii { + /* This clock is provided by the phy (KSZ8091RNB) */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; + dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; + dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "everspin,mr25h256"; + reg = <0>; + spi-max-frequency = <15000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&gpio2 { + gpio-line-names = "buzzer", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", "", "", "in2", + "prio2", "prio1", "aux", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio6 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "in1", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + temperature-sensor@49 { + compatible = "ad,ad7414"; + reg = <0x49>; + }; + + rtc@51 { + compatible = "nxp,pcf2127"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */ + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */ + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */ + + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0 + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0 + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0 + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + /* without SION i2c doesn't detect bus busy */ + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018 + >; + }; + + pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 + >; + }; + + pinctrl_siox: sioxgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */ + >; + }; + + pinctrl_uart1_dte: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart2_dte: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart3_dce: uart3grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010 + >; + }; + + pinctrl_uart4_dce: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010 + >; + }; + + pinctrl_uart5_dce: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */ + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&rmii_clk>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_dce>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_dce>; + rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_dce>; + rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; |