diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6ull-colibri-aster.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6ull-colibri-aster.dtsi | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi new file mode 100644 index 000000000..c9133ba2d --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&ecspi1 { + status = "okay"; + + num-cs = <2>; + cs-gpios = < + &gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */ + &gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */ + >; +}; + +/* + * Following SODIMM Pins should not be accessed as GPIO on Aster board: + * 134 - AIN5_SCL (no connection) + * 127 - Voltage Level Translator OE# signal (IC11 and IC12) + * + * To configure GPIO to LED5, please disable FEC2 and uncomment the following: + * &iomuxc { + * pinctrl-names = "default"; + * pinctrl-0 = < + * &pinctrl_gpio1 + * &pinctrl_gpio2 + * &pinctrl_gpio3 + * &pinctrl_gpio4 + * &pinctrl_gpio6 - for non-WiFi modules only + * &pinctrl_gpio7 + * &pinctrl_gpio_aster + * >; + * + * pinctrl_gpio_aster: gpio-aster { + * fsl,pins = < + * MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0 + * >; + * }; + * }; + */ + +&i2c1 { + status = "okay"; + + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; |