diff options
Diffstat (limited to 'arch/arm/boot/dts/imxrt1050.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imxrt1050.dtsi | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi new file mode 100644 index 000000000..03e6a858a --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include "armv7-m.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/imxrt1050-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + }; + + soc { + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + anatop: anatop@400d8000 { + compatible = "fsl,imxrt-anatop"; + reg = <0x400d8000 0x4000>; + }; + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <80>, <81>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <82>, <83>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <84>, <85>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@401c4000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c4000 0x4000>; + interrupts = <86>, <87>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@400c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x400c0000 0x4000>; + interrupts = <88>, <89>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + reg = <0x401ec000 0x4000>; + interrupts = <100>; + clocks = <&osc3M>; + clock-names = "per"; + }; + }; +}; |