diff options
Diffstat (limited to 'arch/arm/mach-sa1100/collie.c')
| -rw-r--r-- | arch/arm/mach-sa1100/collie.c | 462 |
1 files changed, 462 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c new file mode 100644 index 000000000..14c33ed05 --- /dev/null +++ b/arch/arm/mach-sa1100/collie.c @@ -0,0 +1,462 @@ +/* + * linux/arch/arm/mach-sa1100/collie.c + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains all Collie-specific tweaks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ChangeLog: + * 2006 Pavel Machek <pavel@ucw.cz> + * 03-06-2004 John Lenz <lenz@cs.wisc.edu> + * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net> + * 04-16-2001 Lineo Japan,Inc. ... + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/delay.h> +#include <linux/platform_data/sa11x0-serial.h> +#include <linux/platform_device.h> +#include <linux/mfd/ucb1x00.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/timer.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/power/gpio-charger.h> + +#include <video/sa1100fb.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <mach/collie.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <linux/platform_data/irda-sa11x0.h> + +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> +#include <asm/hardware/locomo.h> +#include <linux/platform_data/mfd-mcp-sa11x0.h> +#include <mach/irqs.h> + +#include "generic.h" + +static struct resource collie_scoop_resources[] = { + [0] = DEFINE_RES_MEM(0x40800000, SZ_4K), +}; + +static struct scoop_config collie_scoop_setup = { + .io_dir = COLLIE_SCOOP_IO_DIR, + .io_out = COLLIE_SCOOP_IO_OUT, + .gpio_base = COLLIE_SCOOP_GPIO_BASE, +}; + +struct platform_device colliescoop_device = { + .name = "sharp-scoop", + .id = -1, + .dev = { + .platform_data = &collie_scoop_setup, + }, + .num_resources = ARRAY_SIZE(collie_scoop_resources), + .resource = collie_scoop_resources, +}; + +static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = { + { + .dev = &colliescoop_device.dev, + .irq = COLLIE_IRQ_GPIO_CF_IRQ, + .cd_irq = COLLIE_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", + }, +}; + +static struct scoop_pcmcia_config collie_pcmcia_config = { + .devs = &collie_pcmcia_scoop[0], + .num_devs = 1, +}; + +static struct ucb1x00_plat_data collie_ucb1x00_data = { + .gpio_base = COLLIE_TC35143_GPIO_BASE, +}; + +static struct mcp_plat_data collie_mcp_data = { + .mccr0 = MCCR0_ADM | MCCR0_ExtClk, + .sclk_rate = 9216000, + .codec_pdata = &collie_ucb1x00_data, +}; + +/* Battery management GPIOs */ +static struct gpiod_lookup_table collie_battery_gpiod_table = { + /* the MCP codec mcp0 has the ucb1x00 as attached device */ + .dev_id = "ucb1x00", + .table = { + /* This is found on the main GPIO on the SA1100 */ + GPIO_LOOKUP("gpio", COLLIE_GPIO_CO, + "main battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio", COLLIE_GPIO_MAIN_BAT_LOW, + "main battery low", GPIO_ACTIVE_HIGH), + /* + * This is GPIO 0 on the Scoop expander, which is registered + * from common/scoop.c with this gpio chip label. + */ + GPIO_LOOKUP("sharp-scoop", 0, + "main charge on", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static int collie_ir_startup(struct device *dev) +{ + int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA"); + if (rc) + return rc; + rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1); + + if (!rc) + return 0; + + gpio_free(COLLIE_GPIO_IR_ON); + return rc; +} + +static void collie_ir_shutdown(struct device *dev) +{ + gpio_free(COLLIE_GPIO_IR_ON); +} + +static int collie_ir_set_power(struct device *dev, unsigned int state) +{ + gpio_set_value(COLLIE_GPIO_IR_ON, !state); + return 0; +} + +static struct irda_platform_data collie_ir_data = { + .startup = collie_ir_startup, + .shutdown = collie_ir_shutdown, + .set_power = collie_ir_set_power, +}; + +/* + * Collie AC IN + */ +static struct gpiod_lookup_table collie_power_gpiod_table = { + .dev_id = "gpio-charger", + .table = { + GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static char *collie_ac_supplied_to[] = { + "main-battery", + "backup-battery", +}; + +static struct gpio_charger_platform_data collie_power_data = { + .name = "charger", + .type = POWER_SUPPLY_TYPE_MAINS, + .supplied_to = collie_ac_supplied_to, + .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to), +}; + +static struct platform_device collie_power_device = { + .name = "gpio-charger", + .id = -1, + .dev.platform_data = &collie_power_data, +}; + +#ifdef CONFIG_SHARP_LOCOMO +/* + * low-level UART features. + */ +struct platform_device collie_locomo_device; + +static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl) +{ + if (mctrl & TIOCM_RTS) + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0); + else + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1); + + if (mctrl & TIOCM_DTR) + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0); + else + locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1); +} + +static u_int collie_uart_get_mctrl(struct uart_port *port) +{ + int ret = TIOCM_CD; + unsigned int r; + + r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); + if (r == -ENODEV) + return ret; + if (r & LOCOMO_GPIO_CTS) + ret |= TIOCM_CTS; + if (r & LOCOMO_GPIO_DSR) + ret |= TIOCM_DSR; + + return ret; +} + +static struct sa1100_port_fns collie_port_fns __initdata = { + .set_mctrl = collie_uart_set_mctrl, + .get_mctrl = collie_uart_get_mctrl, +}; + +static int collie_uart_probe(struct locomo_dev *dev) +{ + return 0; +} + +static struct locomo_driver collie_uart_driver = { + .drv = { + .name = "collie_uart", + }, + .devid = LOCOMO_DEVID_UART, + .probe = collie_uart_probe, +}; + +static int __init collie_uart_init(void) +{ + return locomo_driver_register(&collie_uart_driver); +} +device_initcall(collie_uart_init); + +#endif + + +static struct resource locomo_resources[] = { + [0] = DEFINE_RES_MEM(0x40000000, SZ_8K), + [1] = DEFINE_RES_IRQ(IRQ_GPIO25), +}; + +static struct locomo_platform_data locomo_info = { + .irq_base = IRQ_BOARD_START, +}; + +struct platform_device collie_locomo_device = { + .name = "locomo", + .id = 0, + .dev = { + .platform_data = &locomo_info, + }, + .num_resources = ARRAY_SIZE(locomo_resources), + .resource = locomo_resources, +}; + +static struct gpio_keys_button collie_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_RESERVED, + .gpio = COLLIE_GPIO_ON_KEY, + .desc = "On key", + .wakeup = 1, + .active_low = 1, + }, + { + .type = EV_PWR, + .code = KEY_WAKEUP, + .gpio = COLLIE_GPIO_WAKEUP, + .desc = "Sync", + .wakeup = 1, + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data collie_gpio_keys_data = { + .buttons = collie_gpio_keys, + .nbuttons = ARRAY_SIZE(collie_gpio_keys), +}; + +static struct platform_device collie_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &collie_gpio_keys_data, + }, +}; + +static struct platform_device *devices[] __initdata = { + &collie_locomo_device, + &colliescoop_device, + &collie_power_device, + &collie_gpio_keys_device, +}; + +static struct mtd_partition collie_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x000C0000, + .mask_flags = MTD_WRITEABLE + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x00100000, + }, { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x00e20000, + }, { + .name = "bootblock", + .offset = MTDPART_OFS_APPEND, + .size = 0x00020000, + .mask_flags = MTD_WRITEABLE + } +}; + +static int collie_flash_init(void) +{ + int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable"); + if (rc) + return rc; + + rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1); + if (rc) + gpio_free(COLLIE_GPIO_VPEN); + + return rc; +} + +static void collie_set_vpp(int vpp) +{ + gpio_set_value(COLLIE_GPIO_VPEN, vpp); +} + +static void collie_flash_exit(void) +{ + gpio_free(COLLIE_GPIO_VPEN); +} + +static struct flash_platform_data collie_flash_data = { + .map_name = "cfi_probe", + .init = collie_flash_init, + .set_vpp = collie_set_vpp, + .exit = collie_flash_exit, + .parts = collie_partitions, + .nr_parts = ARRAY_SIZE(collie_partitions), +}; + +static struct resource collie_flash_resources[] = { + DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M), +}; + +static struct sa1100fb_mach_info collie_lcd_info = { + .pixclock = 171521, .bpp = 16, + .xres = 320, .yres = 240, + + .hsync_len = 5, .vsync_len = 1, + .left_margin = 11, .upper_margin = 2, + .right_margin = 30, .lower_margin = 0, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), + +#ifdef CONFIG_BACKLIGHT_LOCOMO + .lcd_power = locomolcd_power +#endif +}; + +static void __init collie_init(void) +{ + int ret = 0; + + /* cpu initialize */ + GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | + GPIO_MCP_CLK | GPIO_32_768kHz; + + GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | + GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | + GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | + _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON | + _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; + + PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | + PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | + PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; + + PWER = 0; + + PGSR = _COLLIE_GPIO_nREMOCON_ON; + + PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4; + + PCFR = PCFR_OPDE; + + GPSR |= _COLLIE_GPIO_UCB1x00_RESET; + + sa11x0_ppc_configure_mcp(); + + + platform_scoop_config = &collie_pcmcia_config; + + gpiod_add_lookup_table(&collie_power_gpiod_table); + gpiod_add_lookup_table(&collie_battery_gpiod_table); + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) { + printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); + } + + sa11x0_register_lcd(&collie_lcd_info); + sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, + ARRAY_SIZE(collie_flash_resources)); + sa11x0_register_mcp(&collie_mcp_data); + sa11x0_register_irda(&collie_ir_data); + + sharpsl_save_param(); +} + +static struct map_desc collie_io_desc[] __initdata = { + { /* 32M main flash (cs0) */ + .virtual = 0xe8000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x02000000, + .type = MT_DEVICE + }, { /* 32M boot flash (cs1) */ + .virtual = 0xea000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x02000000, + .type = MT_DEVICE + } +}; + +static void __init collie_map_io(void) +{ + sa1100_map_io(); + iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc)); + +#ifdef CONFIG_SHARP_LOCOMO + sa1100_register_uart_fns(&collie_port_fns); +#endif + sa1100_register_uart(0, 3); + sa1100_register_uart(1, 1); +} + +MACHINE_START(COLLIE, "Sharp-Collie") + .map_io = collie_map_io, + .nr_irqs = SA1100_NR_IRQS, + .init_irq = sa1100_init_irq, + .init_time = sa1100_timer_init, + .init_machine = collie_init, + .init_late = sa11x0_init_late, + .restart = sa11x0_restart, +MACHINE_END |