diff options
Diffstat (limited to 'arch/arm/mach-tegra/pm.c')
| -rw-r--r-- | arch/arm/mach-tegra/pm.c | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c new file mode 100644 index 000000000..b21f51b8e --- /dev/null +++ b/arch/arm/mach-tegra/pm.c @@ -0,0 +1,453 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CPU complex suspend & resume functions for Tegra SoCs + * + * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved. + */ + +#include <linux/clk/tegra.h> +#include <linux/cpumask.h> +#include <linux/cpu_pm.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/suspend.h> + +#include <linux/firmware/trusted_foundations.h> + +#include <soc/tegra/flowctrl.h> +#include <soc/tegra/fuse.h> +#include <soc/tegra/pm.h> +#include <soc/tegra/pmc.h> + +#include <asm/cacheflush.h> +#include <asm/firmware.h> +#include <asm/idmap.h> +#include <asm/proc-fns.h> +#include <asm/smp_plat.h> +#include <asm/suspend.h> +#include <asm/tlbflush.h> + +#include "iomap.h" +#include "pm.h" +#include "reset.h" +#include "sleep.h" + +#ifdef CONFIG_PM_SLEEP +static DEFINE_SPINLOCK(tegra_lp2_lock); +static u32 iram_save_size; +static void *iram_save_addr; +struct tegra_lp1_iram tegra_lp1_iram; +void (*tegra_tear_down_cpu)(void); +void (*tegra_sleep_core_finish)(unsigned long v2p); +static int (*tegra_sleep_func)(unsigned long v2p); + +static void tegra_tear_down_cpu_init(void) +{ + switch (tegra_get_chip_id()) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra_tear_down_cpu = tegra20_tear_down_cpu; + break; + case TEGRA30: + case TEGRA114: + case TEGRA124: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) + tegra_tear_down_cpu = tegra30_tear_down_cpu; + break; + } +} + +/* + * restore_cpu_complex + * + * restores cpu clock setting, clears flow controller + * + * Always called on CPU 0. + */ +static void restore_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Restore the CPU clock settings */ + tegra_cpu_clock_resume(); + + flowctrl_cpu_suspend_exit(cpu); +} + +/* + * suspend_cpu_complex + * + * saves pll state for use by restart_plls, prepares flow controller for + * transition to suspend state + * + * Must always be called on cpu 0. + */ +static void suspend_cpu_complex(void) +{ + int cpu = smp_processor_id(); + + BUG_ON(cpu != 0); + +#ifdef CONFIG_SMP + cpu = cpu_logical_map(cpu); +#endif + + /* Save the CPU clock settings */ + tegra_cpu_clock_suspend(); + + flowctrl_cpu_suspend_enter(cpu); +} + +void tegra_pm_clear_cpu_in_lp2(void) +{ + int phy_cpu_id = cpu_logical_map(smp_processor_id()); + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 &= ~BIT(phy_cpu_id); + + spin_unlock(&tegra_lp2_lock); +} + +void tegra_pm_set_cpu_in_lp2(void) +{ + int phy_cpu_id = cpu_logical_map(smp_processor_id()); + u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; + + spin_lock(&tegra_lp2_lock); + + BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id))); + *cpu_in_lp2 |= BIT(phy_cpu_id); + + spin_unlock(&tegra_lp2_lock); +} + +static int tegra_sleep_cpu(unsigned long v2p) +{ + if (tegra_cpu_car_ops->rail_off_ready && + WARN_ON(!tegra_cpu_rail_off_ready())) + return -EBUSY; + + /* + * L2 cache disabling using kernel API only allowed when all + * secondary CPU's are offline. Cache have to be disabled with + * MMU-on if cache maintenance is done via Trusted Foundations + * firmware. Note that CPUIDLE won't ever enter powergate on Tegra30 + * if any of secondary CPU's is online and this is the LP2-idle + * code-path only for Tegra20/30. + */ +#ifdef CONFIG_OUTER_CACHE + if (trusted_foundations_registered() && outer_cache.disable) + outer_cache.disable(); +#endif + /* + * Note that besides of setting up CPU reset vector this firmware + * call may also do the following, depending on the FW version: + * 1) Disable L2. But this doesn't matter since we already + * disabled the L2. + * 2) Disable D-cache. This need to be taken into account in + * particular by the tegra_disable_clean_inv_dcache() which + * shall avoid the re-disable. + */ + call_firmware_op(prepare_idle, TF_PM_MODE_LP2); + + setup_mm_for_reboot(); + tegra_sleep_cpu_finish(v2p); + + /* should never here */ + BUG(); + + return 0; +} + +static void tegra_pm_set(enum tegra_suspend_mode mode) +{ + u32 value; + + switch (tegra_get_chip_id()) { + case TEGRA20: + case TEGRA30: + break; + default: + /* Turn off CRAIL */ + value = flowctrl_read_cpu_csr(0); + value &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK; + value |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL; + flowctrl_write_cpu_csr(0, value); + break; + } + + tegra_pmc_enter_suspend_mode(mode); +} + +int tegra_pm_enter_lp2(void) +{ + int err; + + tegra_pm_set(TEGRA_SUSPEND_LP2); + + cpu_cluster_pm_enter(); + suspend_cpu_complex(); + + err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. This is always a no-op on Tegra114+. + */ + outer_resume(); + + restore_cpu_complex(); + cpu_cluster_pm_exit(); + + call_firmware_op(prepare_idle, TF_PM_MODE_NONE); + + return err; +} + +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode) +{ + /* + * The Tegra devices support suspending to LP1 or lower currently. + */ + if (mode > TEGRA_SUSPEND_LP1) + return TEGRA_SUSPEND_LP1; + + return mode; +} + +static int tegra_sleep_core(unsigned long v2p) +{ + /* + * Cache have to be disabled with MMU-on if cache maintenance is done + * via Trusted Foundations firmware. This is a no-op on Tegra114+. + */ + if (trusted_foundations_registered()) + outer_disable(); + + call_firmware_op(prepare_idle, TF_PM_MODE_LP1); + + setup_mm_for_reboot(); + tegra_sleep_core_finish(v2p); + + /* should never here */ + BUG(); + + return 0; +} + +/* + * tegra_lp1_iram_hook + * + * Hooking the address of LP1 reset vector and SDRAM self-refresh code in + * SDRAM. These codes not be copied to IRAM in this fuction. We need to + * copy these code to IRAM before LP0/LP1 suspend and restore the content + * of IRAM after resume. + */ +static bool tegra_lp1_iram_hook(void) +{ + switch (tegra_get_chip_id()) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_lp1_iram_hook(); + break; + case TEGRA30: + case TEGRA114: + case TEGRA124: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) + tegra30_lp1_iram_hook(); + break; + default: + break; + } + + if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr) + return false; + + iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr; + iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL); + if (!iram_save_addr) + return false; + + return true; +} + +static bool tegra_sleep_core_init(void) +{ + switch (tegra_get_chip_id()) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_sleep_core_init(); + break; + case TEGRA30: + case TEGRA114: + case TEGRA124: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) + tegra30_sleep_core_init(); + break; + default: + break; + } + + if (!tegra_sleep_core_finish) + return false; + + return true; +} + +static void tegra_suspend_enter_lp1(void) +{ + /* copy the reset vector & SDRAM shutdown code into IRAM */ + memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), + iram_save_size); + memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), + tegra_lp1_iram.start_addr, iram_save_size); + + *((u32 *)tegra_cpu_lp1_mask) = 1; +} + +static void tegra_suspend_exit_lp1(void) +{ + /* restore IRAM */ + memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr, + iram_save_size); + + *(u32 *)tegra_cpu_lp1_mask = 0; +} + +static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { + [TEGRA_SUSPEND_NONE] = "none", + [TEGRA_SUSPEND_LP2] = "LP2", + [TEGRA_SUSPEND_LP1] = "LP1", + [TEGRA_SUSPEND_LP0] = "LP0", +}; + +static int tegra_suspend_enter(suspend_state_t state) +{ + enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); + + if (WARN_ON(mode < TEGRA_SUSPEND_NONE || + mode >= TEGRA_MAX_SUSPEND_MODE)) + return -EINVAL; + + pr_info("Entering suspend state %s\n", lp_state[mode]); + + tegra_pm_set(mode); + + local_fiq_disable(); + + suspend_cpu_complex(); + switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_suspend_enter_lp1(); + break; + case TEGRA_SUSPEND_LP2: + tegra_pm_set_cpu_in_lp2(); + break; + default: + break; + } + + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func); + + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. + */ + outer_resume(); + + switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_suspend_exit_lp1(); + break; + case TEGRA_SUSPEND_LP2: + tegra_pm_clear_cpu_in_lp2(); + break; + default: + break; + } + restore_cpu_complex(); + + local_fiq_enable(); + + call_firmware_op(prepare_idle, TF_PM_MODE_NONE); + + return 0; +} + +static const struct platform_suspend_ops tegra_suspend_ops = { + .valid = suspend_valid_only_mem, + .enter = tegra_suspend_enter, +}; + +void tegra_pm_init_suspend(void) +{ + enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); + + if (mode == TEGRA_SUSPEND_NONE) + return; + + tegra_tear_down_cpu_init(); + + if (mode >= TEGRA_SUSPEND_LP1) { + if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) { + pr_err("%s: unable to allocate memory for SDRAM" + "self-refresh -- LP0/LP1 unavailable\n", + __func__); + tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2); + mode = TEGRA_SUSPEND_LP2; + } + } + + /* set up sleep function for cpu_suspend */ + switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_sleep_func = tegra_sleep_core; + break; + case TEGRA_SUSPEND_LP2: + tegra_sleep_func = tegra_sleep_cpu; + break; + default: + break; + } + + suspend_set_ops(&tegra_suspend_ops); +} + +int tegra_pm_park_secondary_cpu(unsigned long cpu) +{ + if (cpu > 0) { + tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS); + + if (tegra_get_chip_id() == TEGRA20) + tegra20_hotplug_shutdown(); + else + tegra30_hotplug_shutdown(); + } + + return -EINVAL; +} +#endif |