diff options
Diffstat (limited to 'arch/sparc/kernel/syscalls.S')
| -rw-r--r-- | arch/sparc/kernel/syscalls.S | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S new file mode 100644 index 000000000..0e8ab0602 --- /dev/null +++ b/arch/sparc/kernel/syscalls.S @@ -0,0 +1,301 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + /* SunOS's execv() call only specifies the argv argument, the + * environment settings are the same as the calling processes. + */ +sys64_execve: + set sys_execve, %g1 + jmpl %g1, %g0 + flushw + +sys64_execveat: + set sys_execveat, %g1 + jmpl %g1, %g0 + flushw + +#ifdef CONFIG_COMPAT +sunos_execv: + mov %g0, %o2 +sys32_execve: + set compat_sys_execve, %g1 + jmpl %g1, %g0 + flushw + +sys32_execveat: + set compat_sys_execveat, %g1 + jmpl %g1, %g0 + flushw +#endif + + .align 32 +#ifdef CONFIG_COMPAT +sys32_sigstack: + ba,pt %xcc, do_sys32_sigstack + mov %i6, %o2 +#endif + .align 32 +#ifdef CONFIG_COMPAT +sys32_sigreturn: + add %sp, PTREGS_OFF, %o0 + call do_sigreturn32 + add %o7, 1f-.-4, %o7 + nop +#endif +sys_rt_sigreturn: + add %sp, PTREGS_OFF, %o0 + call do_rt_sigreturn + add %o7, 1f-.-4, %o7 + nop +#ifdef CONFIG_COMPAT +sys32_rt_sigreturn: + add %sp, PTREGS_OFF, %o0 + call do_rt_sigreturn32 + add %o7, 1f-.-4, %o7 + nop +#endif + .align 32 +1: ldx [%g6 + TI_FLAGS], %l5 + andcc %l5, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0 + be,pt %icc, rtrap + nop + call syscall_trace_leave + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + nop + + /* This is how fork() was meant to be done, 8 instruction entry. + * + * I questioned the following code briefly, let me clear things + * up so you must not reason on it like I did. + * + * Know the fork_kpsr etc. we use in the sparc32 port? We don't + * need it here because the only piece of window state we copy to + * the child is the CWP register. Even if the parent sleeps, + * we are safe because we stuck it into pt_regs of the parent + * so it will not change. + * + * XXX This raises the question, whether we can do the same on + * XXX sparc32 to get rid of fork_kpsr _and_ fork_kwim. The + * XXX answer is yes. We stick fork_kpsr in UREG_G0 and + * XXX fork_kwim in UREG_G1 (global registers are considered + * XXX volatile across a system call in the sparc ABI I think + * XXX if it isn't we can use regs->y instead, anyone who depends + * XXX upon the Y register being preserved across a fork deserves + * XXX to lose). + * + * In fact we should take advantage of that fact for other things + * during system calls... + */ + .align 32 +sys_vfork: + flushw + ba,pt %xcc, sparc_vfork + add %sp, PTREGS_OFF, %o0 + + .align 32 +sys_fork: + flushw + ba,pt %xcc, sparc_fork + add %sp, PTREGS_OFF, %o0 + + .align 32 +sys_clone: + flushw + ba,pt %xcc, sparc_clone + add %sp, PTREGS_OFF, %o0 + + .globl ret_from_fork +ret_from_fork: + /* Clear current_thread_info()->new_child. */ + stb %g0, [%g6 + TI_NEW_CHILD] + call schedule_tail + mov %g7, %o0 + ldx [%sp + PTREGS_OFF + PT_V9_I0], %o0 + brnz,pt %o0, ret_sys_call + ldx [%g6 + TI_FLAGS], %l0 + ldx [%sp + PTREGS_OFF + PT_V9_G1], %l1 + call %l1 + ldx [%sp + PTREGS_OFF + PT_V9_G2], %o0 + ba,pt %xcc, ret_sys_call + mov 0, %o0 + + .globl sparc_exit_group + .type sparc_exit_group,#function +sparc_exit_group: + sethi %hi(sys_exit_group), %g7 + ba,pt %xcc, 1f + or %g7, %lo(sys_exit_group), %g7 + .size sparc_exit_group,.-sparc_exit_group + + .globl sparc_exit + .type sparc_exit,#function +sparc_exit: + sethi %hi(sys_exit), %g7 + or %g7, %lo(sys_exit), %g7 +1: rdpr %pstate, %g2 + wrpr %g2, PSTATE_IE, %pstate + rdpr %otherwin, %g1 + rdpr %cansave, %g3 + add %g3, %g1, %g3 + wrpr %g3, 0x0, %cansave + wrpr %g0, 0x0, %otherwin + wrpr %g2, 0x0, %pstate + jmpl %g7, %g0 + stb %g0, [%g6 + TI_WSAVED] + .size sparc_exit,.-sparc_exit + +linux_sparc_ni_syscall: + sethi %hi(sys_ni_syscall), %l7 + ba,pt %xcc, 4f + or %l7, %lo(sys_ni_syscall), %l7 + +linux_syscall_trace32: + call syscall_trace_enter + add %sp, PTREGS_OFF, %o0 + brnz,pn %o0, 3f + mov -ENOSYS, %o0 + + /* Syscall tracing can modify the registers. */ + ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 + sethi %hi(sys_call_table32), %l7 + ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0 + or %l7, %lo(sys_call_table32), %l7 + ldx [%sp + PTREGS_OFF + PT_V9_I1], %i1 + ldx [%sp + PTREGS_OFF + PT_V9_I2], %i2 + ldx [%sp + PTREGS_OFF + PT_V9_I3], %i3 + ldx [%sp + PTREGS_OFF + PT_V9_I4], %i4 + ldx [%sp + PTREGS_OFF + PT_V9_I5], %i5 + + cmp %g1, NR_syscalls + bgeu,pn %xcc, 3f + mov -ENOSYS, %o0 + + sll %g1, 2, %l4 + srl %i0, 0, %o0 + lduw [%l7 + %l4], %l7 + srl %i4, 0, %o4 + srl %i1, 0, %o1 + srl %i2, 0, %o2 + ba,pt %xcc, 5f + srl %i3, 0, %o3 + +linux_syscall_trace: + call syscall_trace_enter + add %sp, PTREGS_OFF, %o0 + brnz,pn %o0, 3f + mov -ENOSYS, %o0 + + /* Syscall tracing can modify the registers. */ + ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 + sethi %hi(sys_call_table64), %l7 + ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0 + or %l7, %lo(sys_call_table64), %l7 + ldx [%sp + PTREGS_OFF + PT_V9_I1], %i1 + ldx [%sp + PTREGS_OFF + PT_V9_I2], %i2 + ldx [%sp + PTREGS_OFF + PT_V9_I3], %i3 + ldx [%sp + PTREGS_OFF + PT_V9_I4], %i4 + ldx [%sp + PTREGS_OFF + PT_V9_I5], %i5 + + cmp %g1, NR_syscalls + bgeu,pn %xcc, 3f + mov -ENOSYS, %o0 + + sll %g1, 2, %l4 + mov %i0, %o0 + lduw [%l7 + %l4], %l7 + mov %i1, %o1 + mov %i2, %o2 + mov %i3, %o3 + b,pt %xcc, 2f + mov %i4, %o4 + + + /* Linux 32-bit system calls enter here... */ + .align 32 + .globl linux_sparc_syscall32 +linux_sparc_syscall32: + /* Direct access to user regs, much faster. */ + cmp %g1, NR_syscalls ! IEU1 Group + bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI + srl %i0, 0, %o0 ! IEU0 + sll %g1, 2, %l4 ! IEU0 Group + srl %i4, 0, %o4 ! IEU1 + lduw [%l7 + %l4], %l7 ! Load + srl %i1, 0, %o1 ! IEU0 Group + ldx [%g6 + TI_FLAGS], %l0 ! Load + + srl %i3, 0, %o3 ! IEU0 + srl %i2, 0, %o2 ! IEU0 Group + andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0 + bne,pn %icc, linux_syscall_trace32 ! CTI + mov %i0, %l5 ! IEU1 +5: call %l7 ! CTI Group brk forced + srl %i5, 0, %o5 ! IEU1 + ba,pt %xcc, 3f + sra %o0, 0, %o0 + + /* Linux native system calls enter here... */ + .align 32 + .globl linux_sparc_syscall +linux_sparc_syscall: + /* Direct access to user regs, much faster. */ + cmp %g1, NR_syscalls ! IEU1 Group + bgeu,pn %xcc, linux_sparc_ni_syscall ! CTI + mov %i0, %o0 ! IEU0 + sll %g1, 2, %l4 ! IEU0 Group + mov %i1, %o1 ! IEU1 + lduw [%l7 + %l4], %l7 ! Load +4: mov %i2, %o2 ! IEU0 Group + ldx [%g6 + TI_FLAGS], %l0 ! Load + + mov %i3, %o3 ! IEU1 + mov %i4, %o4 ! IEU0 Group + andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0 + bne,pn %icc, linux_syscall_trace ! CTI Group + mov %i0, %l5 ! IEU0 +2: call %l7 ! CTI Group brk forced + mov %i5, %o5 ! IEU0 + nop + +3: stx %o0, [%sp + PTREGS_OFF + PT_V9_I0] +ret_sys_call: + ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %g3 + mov %ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2 + sllx %g2, 32, %g2 + + cmp %o0, -ERESTART_RESTARTBLOCK + bgeu,pn %xcc, 1f + andcc %l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT|_TIF_NOHZ), %g0 + ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc + +2: + /* System call success, clear Carry condition code. */ + andn %g3, %g2, %g3 +3: + stx %g3, [%sp + PTREGS_OFF + PT_V9_TSTATE] + bne,pn %icc, linux_syscall_trace2 + add %l1, 0x4, %l2 ! npc = npc+4 + stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC] + ba,pt %xcc, rtrap + stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC] + +1: + /* Check if force_successful_syscall_return() + * was invoked. + */ + ldub [%g6 + TI_SYS_NOERROR], %l2 + brnz,pn %l2, 2b + ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc + /* System call failure, set Carry condition code. + * Also, get abs(errno) to return to the process. + */ + sub %g0, %o0, %o0 + stx %o0, [%sp + PTREGS_OFF + PT_V9_I0] + ba,pt %xcc, 3b + or %g3, %g2, %g3 + +linux_syscall_trace2: + call syscall_trace_leave + add %sp, PTREGS_OFF, %o0 + stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC] + ba,pt %xcc, rtrap + stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC] |