diff options
Diffstat (limited to '')
| -rw-r--r-- | block/blk-pm.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/block/blk-pm.c b/block/blk-pm.c new file mode 100644 index 000000000..2dad62cc1 --- /dev/null +++ b/block/blk-pm.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/blk-mq.h> +#include <linux/blk-pm.h> +#include <linux/blkdev.h> +#include <linux/pm_runtime.h> +#include "blk-mq.h" +#include "blk-mq-tag.h" + +/** + * blk_pm_runtime_init - Block layer runtime PM initialization routine + * @q: the queue of the device + * @dev: the device the queue belongs to + * + * Description: + * Initialize runtime-PM-related fields for @q and start auto suspend for + * @dev. Drivers that want to take advantage of request-based runtime PM + * should call this function after @dev has been initialized, and its + * request queue @q has been allocated, and runtime PM for it can not happen + * yet(either due to disabled/forbidden or its usage_count > 0). In most + * cases, driver should call this function before any I/O has taken place. + * + * This function takes care of setting up using auto suspend for the device, + * the autosuspend delay is set to -1 to make runtime suspend impossible + * until an updated value is either set by user or by driver. Drivers do + * not need to touch other autosuspend settings. + * + * The block layer runtime PM is request based, so only works for drivers + * that use request as their IO unit instead of those directly use bio's. + */ +void blk_pm_runtime_init(struct request_queue *q, struct device *dev) +{ + q->dev = dev; + q->rpm_status = RPM_ACTIVE; + pm_runtime_set_autosuspend_delay(q->dev, -1); + pm_runtime_use_autosuspend(q->dev); +} +EXPORT_SYMBOL(blk_pm_runtime_init); + +/** + * blk_pre_runtime_suspend - Pre runtime suspend check + * @q: the queue of the device + * + * Description: + * This function will check if runtime suspend is allowed for the device + * by examining if there are any requests pending in the queue. If there + * are requests pending, the device can not be runtime suspended; otherwise, + * the queue's status will be updated to SUSPENDING and the driver can + * proceed to suspend the device. + * + * For the not allowed case, we mark last busy for the device so that + * runtime PM core will try to autosuspend it some time later. + * + * This function should be called near the start of the device's + * runtime_suspend callback. + * + * Return: + * 0 - OK to runtime suspend the device + * -EBUSY - Device should not be runtime suspended + */ +int blk_pre_runtime_suspend(struct request_queue *q) +{ + int ret = 0; + + if (!q->dev) + return ret; + + WARN_ON_ONCE(q->rpm_status != RPM_ACTIVE); + + spin_lock_irq(&q->queue_lock); + q->rpm_status = RPM_SUSPENDING; + spin_unlock_irq(&q->queue_lock); + + /* + * Increase the pm_only counter before checking whether any + * non-PM blk_queue_enter() calls are in progress to avoid that any + * new non-PM blk_queue_enter() calls succeed before the pm_only + * counter is decreased again. + */ + blk_set_pm_only(q); + ret = -EBUSY; + /* Switch q_usage_counter from per-cpu to atomic mode. */ + blk_freeze_queue_start(q); + /* + * Wait until atomic mode has been reached. Since that + * involves calling call_rcu(), it is guaranteed that later + * blk_queue_enter() calls see the pm-only state. See also + * http://lwn.net/Articles/573497/. + */ + percpu_ref_switch_to_atomic_sync(&q->q_usage_counter); + if (percpu_ref_is_zero(&q->q_usage_counter)) + ret = 0; + /* Switch q_usage_counter back to per-cpu mode. */ + blk_mq_unfreeze_queue(q); + + if (ret < 0) { + spin_lock_irq(&q->queue_lock); + q->rpm_status = RPM_ACTIVE; + pm_runtime_mark_last_busy(q->dev); + spin_unlock_irq(&q->queue_lock); + + blk_clear_pm_only(q); + } + + return ret; +} +EXPORT_SYMBOL(blk_pre_runtime_suspend); + +/** + * blk_post_runtime_suspend - Post runtime suspend processing + * @q: the queue of the device + * @err: return value of the device's runtime_suspend function + * + * Description: + * Update the queue's runtime status according to the return value of the + * device's runtime suspend function and mark last busy for the device so + * that PM core will try to auto suspend the device at a later time. + * + * This function should be called near the end of the device's + * runtime_suspend callback. + */ +void blk_post_runtime_suspend(struct request_queue *q, int err) +{ + if (!q->dev) + return; + + spin_lock_irq(&q->queue_lock); + if (!err) { + q->rpm_status = RPM_SUSPENDED; + } else { + q->rpm_status = RPM_ACTIVE; + pm_runtime_mark_last_busy(q->dev); + } + spin_unlock_irq(&q->queue_lock); + + if (err) + blk_clear_pm_only(q); +} +EXPORT_SYMBOL(blk_post_runtime_suspend); + +/** + * blk_pre_runtime_resume - Pre runtime resume processing + * @q: the queue of the device + * + * Description: + * Update the queue's runtime status to RESUMING in preparation for the + * runtime resume of the device. + * + * This function should be called near the start of the device's + * runtime_resume callback. + */ +void blk_pre_runtime_resume(struct request_queue *q) +{ + if (!q->dev) + return; + + spin_lock_irq(&q->queue_lock); + q->rpm_status = RPM_RESUMING; + spin_unlock_irq(&q->queue_lock); +} +EXPORT_SYMBOL(blk_pre_runtime_resume); + +/** + * blk_post_runtime_resume - Post runtime resume processing + * @q: the queue of the device + * + * Description: + * For historical reasons, this routine merely calls blk_set_runtime_active() + * to do the real work of restarting the queue. It does this regardless of + * whether the device's runtime-resume succeeded; even if it failed the + * driver or error handler will need to communicate with the device. + * + * This function should be called near the end of the device's + * runtime_resume callback. + */ +void blk_post_runtime_resume(struct request_queue *q) +{ + blk_set_runtime_active(q); +} +EXPORT_SYMBOL(blk_post_runtime_resume); + +/** + * blk_set_runtime_active - Force runtime status of the queue to be active + * @q: the queue of the device + * + * If the device is left runtime suspended during system suspend the resume + * hook typically resumes the device and corrects runtime status + * accordingly. However, that does not affect the queue runtime PM status + * which is still "suspended". This prevents processing requests from the + * queue. + * + * This function can be used in driver's resume hook to correct queue + * runtime PM status and re-enable peeking requests from the queue. It + * should be called before first request is added to the queue. + * + * This function is also called by blk_post_runtime_resume() for + * runtime resumes. It does everything necessary to restart the queue. + */ +void blk_set_runtime_active(struct request_queue *q) +{ + int old_status; + + if (!q->dev) + return; + + spin_lock_irq(&q->queue_lock); + old_status = q->rpm_status; + q->rpm_status = RPM_ACTIVE; + pm_runtime_mark_last_busy(q->dev); + pm_request_autosuspend(q->dev); + spin_unlock_irq(&q->queue_lock); + + if (old_status != RPM_ACTIVE) + blk_clear_pm_only(q); +} +EXPORT_SYMBOL(blk_set_runtime_active); |