diff options
Diffstat (limited to 'drivers/atm/lanai.c')
| -rw-r--r-- | drivers/atm/lanai.c | 2603 |
1 files changed, 2603 insertions, 0 deletions
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c new file mode 100644 index 000000000..32d7aa141 --- /dev/null +++ b/drivers/atm/lanai.c @@ -0,0 +1,2603 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* lanai.c -- Copyright 1999-2003 by Mitchell Blank Jr <mitch@sfgoth.com> + * + * This driver supports ATM cards based on the Efficient "Lanai" + * chipset such as the Speedstream 3010 and the ENI-25p. The + * Speedstream 3060 is currently not supported since we don't + * have the code to drive the on-board Alcatel DSL chipset (yet). + * + * Thanks to Efficient for supporting this project with hardware, + * documentation, and by answering my questions. + * + * Things not working yet: + * + * o We don't support the Speedstream 3060 yet - this card has + * an on-board DSL modem chip by Alcatel and the driver will + * need some extra code added to handle it + * + * o Note that due to limitations of the Lanai only one VCC can be + * in CBR at once + * + * o We don't currently parse the EEPROM at all. The code is all + * there as per the spec, but it doesn't actually work. I think + * there may be some issues with the docs. Anyway, do NOT + * enable it yet - bugs in that code may actually damage your + * hardware! Because of this you should hardware an ESI before + * trying to use this in a LANE or MPOA environment. + * + * o AAL0 is stubbed in but the actual rx/tx path isn't written yet: + * vcc_tx_aal0() needs to send or queue a SKB + * vcc_tx_unqueue_aal0() needs to attempt to send queued SKBs + * vcc_rx_aal0() needs to handle AAL0 interrupts + * This isn't too much work - I just wanted to get other things + * done first. + * + * o lanai_change_qos() isn't written yet + * + * o There aren't any ioctl's yet -- I'd like to eventually support + * setting loopback and LED modes that way. + * + * o If the segmentation engine or DMA gets shut down we should restart + * card as per section 17.0i. (see lanai_reset) + * + * o setsockopt(SO_CIRANGE) isn't done (although despite what the + * API says it isn't exactly commonly implemented) + */ + +/* Version history: + * v.1.00 -- 26-JUL-2003 -- PCI/DMA updates + * v.0.02 -- 11-JAN-2000 -- Endian fixes + * v.0.01 -- 30-NOV-1999 -- Initial release + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/atmdev.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <linux/spinlock.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +/* -------------------- TUNABLE PARAMATERS: */ + +/* + * Maximum number of VCIs per card. Setting it lower could theoretically + * save some memory, but since we allocate our vcc list with get_free_pages, + * it's not really likely for most architectures + */ +#define NUM_VCI (1024) + +/* + * Enable extra debugging + */ +#define DEBUG +/* + * Debug _all_ register operations with card, except the memory test. + * Also disables the timed poll to prevent extra chattiness. This + * isn't for normal use + */ +#undef DEBUG_RW + +/* + * The programming guide specifies a full test of the on-board SRAM + * at initialization time. Undefine to remove this + */ +#define FULL_MEMORY_TEST + +/* + * This is the number of (4 byte) service entries that we will + * try to allocate at startup. Note that we will end up with + * one PAGE_SIZE's worth regardless of what this is set to + */ +#define SERVICE_ENTRIES (1024) +/* TODO: make above a module load-time option */ + +/* + * We normally read the onboard EEPROM in order to discover our MAC + * address. Undefine to _not_ do this + */ +/* #define READ_EEPROM */ /* ***DONT ENABLE YET*** */ +/* TODO: make above a module load-time option (also) */ + +/* + * Depth of TX fifo (in 128 byte units; range 2-31) + * Smaller numbers are better for network latency + * Larger numbers are better for PCI latency + * I'm really sure where the best tradeoff is, but the BSD driver uses + * 7 and it seems to work ok. + */ +#define TX_FIFO_DEPTH (7) +/* TODO: make above a module load-time option */ + +/* + * How often (in jiffies) we will try to unstick stuck connections - + * shouldn't need to happen much + */ +#define LANAI_POLL_PERIOD (10*HZ) +/* TODO: make above a module load-time option */ + +/* + * When allocating an AAL5 receiving buffer, try to make it at least + * large enough to hold this many max_sdu sized PDUs + */ +#define AAL5_RX_MULTIPLIER (3) +/* TODO: make above a module load-time option */ + +/* + * Same for transmitting buffer + */ +#define AAL5_TX_MULTIPLIER (3) +/* TODO: make above a module load-time option */ + +/* + * When allocating an AAL0 transmiting buffer, how many cells should fit. + * Remember we'll end up with a PAGE_SIZE of them anyway, so this isn't + * really critical + */ +#define AAL0_TX_MULTIPLIER (40) +/* TODO: make above a module load-time option */ + +/* + * How large should we make the AAL0 receiving buffer. Remember that this + * is shared between all AAL0 VC's + */ +#define AAL0_RX_BUFFER_SIZE (PAGE_SIZE) +/* TODO: make above a module load-time option */ + +/* + * Should we use Lanai's "powerdown" feature when no vcc's are bound? + */ +/* #define USE_POWERDOWN */ +/* TODO: make above a module load-time option (also) */ + +/* -------------------- DEBUGGING AIDS: */ + +#define DEV_LABEL "lanai" + +#ifdef DEBUG + +#define DPRINTK(format, args...) \ + printk(KERN_DEBUG DEV_LABEL ": " format, ##args) +#define APRINTK(truth, format, args...) \ + do { \ + if (unlikely(!(truth))) \ + printk(KERN_ERR DEV_LABEL ": " format, ##args); \ + } while (0) + +#else /* !DEBUG */ + +#define DPRINTK(format, args...) +#define APRINTK(truth, format, args...) + +#endif /* DEBUG */ + +#ifdef DEBUG_RW +#define RWDEBUG(format, args...) \ + printk(KERN_DEBUG DEV_LABEL ": " format, ##args) +#else /* !DEBUG_RW */ +#define RWDEBUG(format, args...) +#endif + +/* -------------------- DATA DEFINITIONS: */ + +#define LANAI_MAPPING_SIZE (0x40000) +#define LANAI_EEPROM_SIZE (128) + +typedef int vci_t; +typedef void __iomem *bus_addr_t; + +/* DMA buffer in host memory for TX, RX, or service list. */ +struct lanai_buffer { + u32 *start; /* From get_free_pages */ + u32 *end; /* One past last byte */ + u32 *ptr; /* Pointer to current host location */ + dma_addr_t dmaaddr; +}; + +struct lanai_vcc_stats { + unsigned rx_nomem; + union { + struct { + unsigned rx_badlen; + unsigned service_trash; + unsigned service_stream; + unsigned service_rxcrc; + } aal5; + struct { + } aal0; + } x; +}; + +struct lanai_dev; /* Forward declaration */ + +/* + * This is the card-specific per-vcc data. Note that unlike some other + * drivers there is NOT a 1-to-1 correspondance between these and + * atm_vcc's - each one of these represents an actual 2-way vcc, but + * an atm_vcc can be 1-way and share with a 1-way vcc in the other + * direction. To make it weirder, there can even be 0-way vccs + * bound to us, waiting to do a change_qos + */ +struct lanai_vcc { + bus_addr_t vbase; /* Base of VCC's registers */ + struct lanai_vcc_stats stats; + int nref; /* # of atm_vcc's who reference us */ + vci_t vci; + struct { + struct lanai_buffer buf; + struct atm_vcc *atmvcc; /* atm_vcc who is receiver */ + } rx; + struct { + struct lanai_buffer buf; + struct atm_vcc *atmvcc; /* atm_vcc who is transmitter */ + int endptr; /* last endptr from service entry */ + struct sk_buff_head backlog; + void (*unqueue)(struct lanai_dev *, struct lanai_vcc *, int); + } tx; +}; + +enum lanai_type { + lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2, + lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB +}; + +struct lanai_dev_stats { + unsigned ovfl_trash; /* # of cells dropped - buffer overflow */ + unsigned vci_trash; /* # of cells dropped - closed vci */ + unsigned hec_err; /* # of cells dropped - bad HEC */ + unsigned atm_ovfl; /* # of cells dropped - rx fifo overflow */ + unsigned pcierr_parity_detect; + unsigned pcierr_serr_set; + unsigned pcierr_master_abort; + unsigned pcierr_m_target_abort; + unsigned pcierr_s_target_abort; + unsigned pcierr_master_parity; + unsigned service_notx; + unsigned service_norx; + unsigned service_rxnotaal5; + unsigned dma_reenable; + unsigned card_reset; +}; + +struct lanai_dev { + bus_addr_t base; + struct lanai_dev_stats stats; + struct lanai_buffer service; + struct lanai_vcc **vccs; +#ifdef USE_POWERDOWN + int nbound; /* number of bound vccs */ +#endif + enum lanai_type type; + vci_t num_vci; /* Currently just NUM_VCI */ + u8 eeprom[LANAI_EEPROM_SIZE]; + u32 serialno, magicno; + struct pci_dev *pci; + DECLARE_BITMAP(backlog_vccs, NUM_VCI); /* VCCs with tx backlog */ + DECLARE_BITMAP(transmit_ready, NUM_VCI); /* VCCs with transmit space */ + struct timer_list timer; + int naal0; + struct lanai_buffer aal0buf; /* AAL0 RX buffers */ + u32 conf1, conf2; /* CONFIG[12] registers */ + u32 status; /* STATUS register */ + spinlock_t endtxlock; + spinlock_t servicelock; + struct atm_vcc *cbrvcc; + int number; + int board_rev; +/* TODO - look at race conditions with maintence of conf1/conf2 */ +/* TODO - transmit locking: should we use _irq not _irqsave? */ +/* TODO - organize above in some rational fashion (see <asm/cache.h>) */ +}; + +/* + * Each device has two bitmaps for each VCC (baclog_vccs and transmit_ready) + * This function iterates one of these, calling a given function for each + * vci with their bit set + */ +static void vci_bitfield_iterate(struct lanai_dev *lanai, + const unsigned long *lp, + void (*func)(struct lanai_dev *,vci_t vci)) +{ + vci_t vci; + + for_each_set_bit(vci, lp, NUM_VCI) + func(lanai, vci); +} + +/* -------------------- BUFFER UTILITIES: */ + +/* + * Lanai needs DMA buffers aligned to 256 bytes of at least 1024 bytes - + * usually any page allocation will do. Just to be safe in case + * PAGE_SIZE is insanely tiny, though... + */ +#define LANAI_PAGE_SIZE ((PAGE_SIZE >= 1024) ? PAGE_SIZE : 1024) + +/* + * Allocate a buffer in host RAM for service list, RX, or TX + * Returns buf->start==NULL if no memory + * Note that the size will be rounded up 2^n bytes, and + * if we can't allocate that we'll settle for something smaller + * until minbytes + */ +static void lanai_buf_allocate(struct lanai_buffer *buf, + size_t bytes, size_t minbytes, struct pci_dev *pci) +{ + int size; + + if (bytes > (128 * 1024)) /* max lanai buffer size */ + bytes = 128 * 1024; + for (size = LANAI_PAGE_SIZE; size < bytes; size *= 2) + ; + if (minbytes < LANAI_PAGE_SIZE) + minbytes = LANAI_PAGE_SIZE; + do { + /* + * Technically we could use non-consistent mappings for + * everything, but the way the lanai uses DMA memory would + * make that a terrific pain. This is much simpler. + */ + buf->start = dma_alloc_coherent(&pci->dev, + size, &buf->dmaaddr, GFP_KERNEL); + if (buf->start != NULL) { /* Success */ + /* Lanai requires 256-byte alignment of DMA bufs */ + APRINTK((buf->dmaaddr & ~0xFFFFFF00) == 0, + "bad dmaaddr: 0x%lx\n", + (unsigned long) buf->dmaaddr); + buf->ptr = buf->start; + buf->end = (u32 *) + (&((unsigned char *) buf->start)[size]); + memset(buf->start, 0, size); + break; + } + size /= 2; + } while (size >= minbytes); +} + +/* size of buffer in bytes */ +static inline size_t lanai_buf_size(const struct lanai_buffer *buf) +{ + return ((unsigned long) buf->end) - ((unsigned long) buf->start); +} + +static void lanai_buf_deallocate(struct lanai_buffer *buf, + struct pci_dev *pci) +{ + if (buf->start != NULL) { + dma_free_coherent(&pci->dev, lanai_buf_size(buf), + buf->start, buf->dmaaddr); + buf->start = buf->end = buf->ptr = NULL; + } +} + +/* size of buffer as "card order" (0=1k .. 7=128k) */ +static int lanai_buf_size_cardorder(const struct lanai_buffer *buf) +{ + int order = get_order(lanai_buf_size(buf)) + (PAGE_SHIFT - 10); + + /* This can only happen if PAGE_SIZE is gigantic, but just in case */ + if (order > 7) + order = 7; + return order; +} + +/* -------------------- PORT I/O UTILITIES: */ + +/* Registers (and their bit-fields) */ +enum lanai_register { + Reset_Reg = 0x00, /* Reset; read for chip type; bits: */ +#define RESET_GET_BOARD_REV(x) (((x)>> 0)&0x03) /* Board revision */ +#define RESET_GET_BOARD_ID(x) (((x)>> 2)&0x03) /* Board ID */ +#define BOARD_ID_LANAI256 (0) /* 25.6M adapter card */ + Endian_Reg = 0x04, /* Endian setting */ + IntStatus_Reg = 0x08, /* Interrupt status */ + IntStatusMasked_Reg = 0x0C, /* Interrupt status (masked) */ + IntAck_Reg = 0x10, /* Interrupt acknowledge */ + IntAckMasked_Reg = 0x14, /* Interrupt acknowledge (masked) */ + IntStatusSet_Reg = 0x18, /* Get status + enable/disable */ + IntStatusSetMasked_Reg = 0x1C, /* Get status + en/di (masked) */ + IntControlEna_Reg = 0x20, /* Interrupt control enable */ + IntControlDis_Reg = 0x24, /* Interrupt control disable */ + Status_Reg = 0x28, /* Status */ +#define STATUS_PROMDATA (0x00000001) /* PROM_DATA pin */ +#define STATUS_WAITING (0x00000002) /* Interrupt being delayed */ +#define STATUS_SOOL (0x00000004) /* SOOL alarm */ +#define STATUS_LOCD (0x00000008) /* LOCD alarm */ +#define STATUS_LED (0x00000010) /* LED (HAPPI) output */ +#define STATUS_GPIN (0x00000020) /* GPIN pin */ +#define STATUS_BUTTBUSY (0x00000040) /* Butt register is pending */ + Config1_Reg = 0x2C, /* Config word 1; bits: */ +#define CONFIG1_PROMDATA (0x00000001) /* PROM_DATA pin */ +#define CONFIG1_PROMCLK (0x00000002) /* PROM_CLK pin */ +#define CONFIG1_SET_READMODE(x) ((x)*0x004) /* PCI BM reads; values: */ +#define READMODE_PLAIN (0) /* Plain memory read */ +#define READMODE_LINE (2) /* Memory read line */ +#define READMODE_MULTIPLE (3) /* Memory read multiple */ +#define CONFIG1_DMA_ENABLE (0x00000010) /* Turn on DMA */ +#define CONFIG1_POWERDOWN (0x00000020) /* Turn off clocks */ +#define CONFIG1_SET_LOOPMODE(x) ((x)*0x080) /* Clock&loop mode; values: */ +#define LOOPMODE_NORMAL (0) /* Normal - no loop */ +#define LOOPMODE_TIME (1) +#define LOOPMODE_DIAG (2) +#define LOOPMODE_LINE (3) +#define CONFIG1_MASK_LOOPMODE (0x00000180) +#define CONFIG1_SET_LEDMODE(x) ((x)*0x0200) /* Mode of LED; values: */ +#define LEDMODE_NOT_SOOL (0) /* !SOOL */ +#define LEDMODE_OFF (1) /* 0 */ +#define LEDMODE_ON (2) /* 1 */ +#define LEDMODE_NOT_LOCD (3) /* !LOCD */ +#define LEDMORE_GPIN (4) /* GPIN */ +#define LEDMODE_NOT_GPIN (7) /* !GPIN */ +#define CONFIG1_MASK_LEDMODE (0x00000E00) +#define CONFIG1_GPOUT1 (0x00001000) /* Toggle for reset */ +#define CONFIG1_GPOUT2 (0x00002000) /* Loopback PHY */ +#define CONFIG1_GPOUT3 (0x00004000) /* Loopback lanai */ + Config2_Reg = 0x30, /* Config word 2; bits: */ +#define CONFIG2_HOWMANY (0x00000001) /* >512 VCIs? */ +#define CONFIG2_PTI7_MODE (0x00000002) /* Make PTI=7 RM, not OAM */ +#define CONFIG2_VPI_CHK_DIS (0x00000004) /* Ignore RX VPI value */ +#define CONFIG2_HEC_DROP (0x00000008) /* Drop cells w/ HEC errors */ +#define CONFIG2_VCI0_NORMAL (0x00000010) /* Treat VCI=0 normally */ +#define CONFIG2_CBR_ENABLE (0x00000020) /* Deal with CBR traffic */ +#define CONFIG2_TRASH_ALL (0x00000040) /* Trashing incoming cells */ +#define CONFIG2_TX_DISABLE (0x00000080) /* Trashing outgoing cells */ +#define CONFIG2_SET_TRASH (0x00000100) /* Turn trashing on */ + Statistics_Reg = 0x34, /* Statistics; bits: */ +#define STATS_GET_FIFO_OVFL(x) (((x)>> 0)&0xFF) /* FIFO overflowed */ +#define STATS_GET_HEC_ERR(x) (((x)>> 8)&0xFF) /* HEC was bad */ +#define STATS_GET_BAD_VCI(x) (((x)>>16)&0xFF) /* VCI not open */ +#define STATS_GET_BUF_OVFL(x) (((x)>>24)&0xFF) /* VCC buffer full */ + ServiceStuff_Reg = 0x38, /* Service stuff; bits: */ +#define SSTUFF_SET_SIZE(x) ((x)*0x20000000) /* size of service buffer */ +#define SSTUFF_SET_ADDR(x) ((x)>>8) /* set address of buffer */ + ServWrite_Reg = 0x3C, /* ServWrite Pointer */ + ServRead_Reg = 0x40, /* ServRead Pointer */ + TxDepth_Reg = 0x44, /* FIFO Transmit Depth */ + Butt_Reg = 0x48, /* Butt register */ + CBR_ICG_Reg = 0x50, + CBR_PTR_Reg = 0x54, + PingCount_Reg = 0x58, /* Ping count */ + DMA_Addr_Reg = 0x5C /* DMA address */ +}; + +static inline bus_addr_t reg_addr(const struct lanai_dev *lanai, + enum lanai_register reg) +{ + return lanai->base + reg; +} + +static inline u32 reg_read(const struct lanai_dev *lanai, + enum lanai_register reg) +{ + u32 t; + t = readl(reg_addr(lanai, reg)); + RWDEBUG("R [0x%08X] 0x%02X = 0x%08X\n", (unsigned int) lanai->base, + (int) reg, t); + return t; +} + +static inline void reg_write(const struct lanai_dev *lanai, u32 val, + enum lanai_register reg) +{ + RWDEBUG("W [0x%08X] 0x%02X < 0x%08X\n", (unsigned int) lanai->base, + (int) reg, val); + writel(val, reg_addr(lanai, reg)); +} + +static inline void conf1_write(const struct lanai_dev *lanai) +{ + reg_write(lanai, lanai->conf1, Config1_Reg); +} + +static inline void conf2_write(const struct lanai_dev *lanai) +{ + reg_write(lanai, lanai->conf2, Config2_Reg); +} + +/* Same as conf2_write(), but defers I/O if we're powered down */ +static inline void conf2_write_if_powerup(const struct lanai_dev *lanai) +{ +#ifdef USE_POWERDOWN + if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0)) + return; +#endif /* USE_POWERDOWN */ + conf2_write(lanai); +} + +static inline void reset_board(const struct lanai_dev *lanai) +{ + DPRINTK("about to reset board\n"); + reg_write(lanai, 0, Reset_Reg); + /* + * If we don't delay a little while here then we can end up + * leaving the card in a VERY weird state and lock up the + * PCI bus. This isn't documented anywhere but I've convinced + * myself after a lot of painful experimentation + */ + udelay(5); +} + +/* -------------------- CARD SRAM UTILITIES: */ + +/* The SRAM is mapped into normal PCI memory space - the only catch is + * that it is only 16-bits wide but must be accessed as 32-bit. The + * 16 high bits will be zero. We don't hide this, since they get + * programmed mostly like discrete registers anyway + */ +#define SRAM_START (0x20000) +#define SRAM_BYTES (0x20000) /* Again, half don't really exist */ + +static inline bus_addr_t sram_addr(const struct lanai_dev *lanai, int offset) +{ + return lanai->base + SRAM_START + offset; +} + +static inline u32 sram_read(const struct lanai_dev *lanai, int offset) +{ + return readl(sram_addr(lanai, offset)); +} + +static inline void sram_write(const struct lanai_dev *lanai, + u32 val, int offset) +{ + writel(val, sram_addr(lanai, offset)); +} + +static int sram_test_word(const struct lanai_dev *lanai, int offset, + u32 pattern) +{ + u32 readback; + sram_write(lanai, pattern, offset); + readback = sram_read(lanai, offset); + if (likely(readback == pattern)) + return 0; + printk(KERN_ERR DEV_LABEL + "(itf %d): SRAM word at %d bad: wrote 0x%X, read 0x%X\n", + lanai->number, offset, + (unsigned int) pattern, (unsigned int) readback); + return -EIO; +} + +static int sram_test_pass(const struct lanai_dev *lanai, u32 pattern) +{ + int offset, result = 0; + for (offset = 0; offset < SRAM_BYTES && result == 0; offset += 4) + result = sram_test_word(lanai, offset, pattern); + return result; +} + +static int sram_test_and_clear(const struct lanai_dev *lanai) +{ +#ifdef FULL_MEMORY_TEST + int result; + DPRINTK("testing SRAM\n"); + if ((result = sram_test_pass(lanai, 0x5555)) != 0) + return result; + if ((result = sram_test_pass(lanai, 0xAAAA)) != 0) + return result; +#endif + DPRINTK("clearing SRAM\n"); + return sram_test_pass(lanai, 0x0000); +} + +/* -------------------- CARD-BASED VCC TABLE UTILITIES: */ + +/* vcc table */ +enum lanai_vcc_offset { + vcc_rxaddr1 = 0x00, /* Location1, plus bits: */ +#define RXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of RX buffer */ +#define RXADDR1_SET_RMMODE(x) ((x)*0x00800) /* RM cell action; values: */ +#define RMMODE_TRASH (0) /* discard */ +#define RMMODE_PRESERVE (1) /* input as AAL0 */ +#define RMMODE_PIPE (2) /* pipe to coscheduler */ +#define RMMODE_PIPEALL (3) /* pipe non-RM too */ +#define RXADDR1_OAM_PRESERVE (0x00002000) /* Input OAM cells as AAL0 */ +#define RXADDR1_SET_MODE(x) ((x)*0x0004000) /* Reassembly mode */ +#define RXMODE_TRASH (0) /* discard */ +#define RXMODE_AAL0 (1) /* non-AAL5 mode */ +#define RXMODE_AAL5 (2) /* AAL5, intr. each PDU */ +#define RXMODE_AAL5_STREAM (3) /* AAL5 w/o per-PDU intr */ + vcc_rxaddr2 = 0x04, /* Location2 */ + vcc_rxcrc1 = 0x08, /* RX CRC claculation space */ + vcc_rxcrc2 = 0x0C, + vcc_rxwriteptr = 0x10, /* RX writeptr, plus bits: */ +#define RXWRITEPTR_LASTEFCI (0x00002000) /* Last PDU had EFCI bit */ +#define RXWRITEPTR_DROPPING (0x00004000) /* Had error, dropping */ +#define RXWRITEPTR_TRASHING (0x00008000) /* Trashing */ + vcc_rxbufstart = 0x14, /* RX bufstart, plus bits: */ +#define RXBUFSTART_CLP (0x00004000) +#define RXBUFSTART_CI (0x00008000) + vcc_rxreadptr = 0x18, /* RX readptr */ + vcc_txicg = 0x1C, /* TX ICG */ + vcc_txaddr1 = 0x20, /* Location1, plus bits: */ +#define TXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of TX buffer */ +#define TXADDR1_ABR (0x00008000) /* use ABR (doesn't work) */ + vcc_txaddr2 = 0x24, /* Location2 */ + vcc_txcrc1 = 0x28, /* TX CRC claculation space */ + vcc_txcrc2 = 0x2C, + vcc_txreadptr = 0x30, /* TX Readptr, plus bits: */ +#define TXREADPTR_GET_PTR(x) ((x)&0x01FFF) +#define TXREADPTR_MASK_DELTA (0x0000E000) /* ? */ + vcc_txendptr = 0x34, /* TX Endptr, plus bits: */ +#define TXENDPTR_CLP (0x00002000) +#define TXENDPTR_MASK_PDUMODE (0x0000C000) /* PDU mode; values: */ +#define PDUMODE_AAL0 (0*0x04000) +#define PDUMODE_AAL5 (2*0x04000) +#define PDUMODE_AAL5STREAM (3*0x04000) + vcc_txwriteptr = 0x38, /* TX Writeptr */ +#define TXWRITEPTR_GET_PTR(x) ((x)&0x1FFF) + vcc_txcbr_next = 0x3C /* # of next CBR VCI in ring */ +#define TXCBR_NEXT_BOZO (0x00008000) /* "bozo bit" */ +}; + +#define CARDVCC_SIZE (0x40) + +static inline bus_addr_t cardvcc_addr(const struct lanai_dev *lanai, + vci_t vci) +{ + return sram_addr(lanai, vci * CARDVCC_SIZE); +} + +static inline u32 cardvcc_read(const struct lanai_vcc *lvcc, + enum lanai_vcc_offset offset) +{ + u32 val; + APRINTK(lvcc->vbase != NULL, "cardvcc_read: unbound vcc!\n"); + val= readl(lvcc->vbase + offset); + RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n", + lvcc->vci, (int) offset, val); + return val; +} + +static inline void cardvcc_write(const struct lanai_vcc *lvcc, + u32 val, enum lanai_vcc_offset offset) +{ + APRINTK(lvcc->vbase != NULL, "cardvcc_write: unbound vcc!\n"); + APRINTK((val & ~0xFFFF) == 0, + "cardvcc_write: bad val 0x%X (vci=%d, addr=0x%02X)\n", + (unsigned int) val, lvcc->vci, (unsigned int) offset); + RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n", + lvcc->vci, (unsigned int) offset, (unsigned int) val); + writel(val, lvcc->vbase + offset); +} + +/* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */ + +/* How many bytes will an AAL5 PDU take to transmit - remember that: + * o we need to add 8 bytes for length, CPI, UU, and CRC + * o we need to round up to 48 bytes for cells + */ +static inline int aal5_size(int size) +{ + int cells = (size + 8 + 47) / 48; + return cells * 48; +} + +/* -------------------- FREE AN ATM SKB: */ + +static inline void lanai_free_skb(struct atm_vcc *atmvcc, struct sk_buff *skb) +{ + if (atmvcc->pop != NULL) + atmvcc->pop(atmvcc, skb); + else + dev_kfree_skb_any(skb); +} + +/* -------------------- TURN VCCS ON AND OFF: */ + +static void host_vcc_start_rx(const struct lanai_vcc *lvcc) +{ + u32 addr1; + if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) { + dma_addr_t dmaaddr = lvcc->rx.buf.dmaaddr; + cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc1); + cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc2); + cardvcc_write(lvcc, 0, vcc_rxwriteptr); + cardvcc_write(lvcc, 0, vcc_rxbufstart); + cardvcc_write(lvcc, 0, vcc_rxreadptr); + cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_rxaddr2); + addr1 = ((dmaaddr >> 8) & 0xFF) | + RXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->rx.buf))| + RXADDR1_SET_RMMODE(RMMODE_TRASH) | /* ??? */ + /* RXADDR1_OAM_PRESERVE | --- no OAM support yet */ + RXADDR1_SET_MODE(RXMODE_AAL5); + } else + addr1 = RXADDR1_SET_RMMODE(RMMODE_PRESERVE) | /* ??? */ + RXADDR1_OAM_PRESERVE | /* ??? */ + RXADDR1_SET_MODE(RXMODE_AAL0); + /* This one must be last! */ + cardvcc_write(lvcc, addr1, vcc_rxaddr1); +} + +static void host_vcc_start_tx(const struct lanai_vcc *lvcc) +{ + dma_addr_t dmaaddr = lvcc->tx.buf.dmaaddr; + cardvcc_write(lvcc, 0, vcc_txicg); + cardvcc_write(lvcc, 0xFFFF, vcc_txcrc1); + cardvcc_write(lvcc, 0xFFFF, vcc_txcrc2); + cardvcc_write(lvcc, 0, vcc_txreadptr); + cardvcc_write(lvcc, 0, vcc_txendptr); + cardvcc_write(lvcc, 0, vcc_txwriteptr); + cardvcc_write(lvcc, + (lvcc->tx.atmvcc->qos.txtp.traffic_class == ATM_CBR) ? + TXCBR_NEXT_BOZO | lvcc->vci : 0, vcc_txcbr_next); + cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_txaddr2); + cardvcc_write(lvcc, + ((dmaaddr >> 8) & 0xFF) | + TXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->tx.buf)), + vcc_txaddr1); +} + +/* Shutdown receiving on card */ +static void lanai_shutdown_rx_vci(const struct lanai_vcc *lvcc) +{ + if (lvcc->vbase == NULL) /* We were never bound to a VCI */ + return; + /* 15.1.1 - set to trashing, wait one cell time (15us) */ + cardvcc_write(lvcc, + RXADDR1_SET_RMMODE(RMMODE_TRASH) | + RXADDR1_SET_MODE(RXMODE_TRASH), vcc_rxaddr1); + udelay(15); + /* 15.1.2 - clear rest of entries */ + cardvcc_write(lvcc, 0, vcc_rxaddr2); + cardvcc_write(lvcc, 0, vcc_rxcrc1); + cardvcc_write(lvcc, 0, vcc_rxcrc2); + cardvcc_write(lvcc, 0, vcc_rxwriteptr); + cardvcc_write(lvcc, 0, vcc_rxbufstart); + cardvcc_write(lvcc, 0, vcc_rxreadptr); +} + +/* Shutdown transmitting on card. + * Unfortunately the lanai needs us to wait until all the data + * drains out of the buffer before we can dealloc it, so this + * can take awhile -- up to 370ms for a full 128KB buffer + * assuming everone else is quiet. In theory the time is + * boundless if there's a CBR VCC holding things up. + */ +static void lanai_shutdown_tx_vci(struct lanai_dev *lanai, + struct lanai_vcc *lvcc) +{ + struct sk_buff *skb; + unsigned long flags, timeout; + int read, write, lastread = -1; + + if (lvcc->vbase == NULL) /* We were never bound to a VCI */ + return; + /* 15.2.1 - wait for queue to drain */ + while ((skb = skb_dequeue(&lvcc->tx.backlog)) != NULL) + lanai_free_skb(lvcc->tx.atmvcc, skb); + read_lock_irqsave(&vcc_sklist_lock, flags); + __clear_bit(lvcc->vci, lanai->backlog_vccs); + read_unlock_irqrestore(&vcc_sklist_lock, flags); + /* + * We need to wait for the VCC to drain but don't wait forever. We + * give each 1K of buffer size 1/128th of a second to clear out. + * TODO: maybe disable CBR if we're about to timeout? + */ + timeout = jiffies + + (((lanai_buf_size(&lvcc->tx.buf) / 1024) * HZ) >> 7); + write = TXWRITEPTR_GET_PTR(cardvcc_read(lvcc, vcc_txwriteptr)); + for (;;) { + read = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)); + if (read == write && /* Is TX buffer empty? */ + (lvcc->tx.atmvcc->qos.txtp.traffic_class != ATM_CBR || + (cardvcc_read(lvcc, vcc_txcbr_next) & + TXCBR_NEXT_BOZO) == 0)) + break; + if (read != lastread) { /* Has there been any progress? */ + lastread = read; + timeout += HZ / 10; + } + if (unlikely(time_after(jiffies, timeout))) { + printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on " + "backlog closing vci %d\n", + lvcc->tx.atmvcc->dev->number, lvcc->vci); + DPRINTK("read, write = %d, %d\n", read, write); + break; + } + msleep(40); + } + /* 15.2.2 - clear out all tx registers */ + cardvcc_write(lvcc, 0, vcc_txreadptr); + cardvcc_write(lvcc, 0, vcc_txwriteptr); + cardvcc_write(lvcc, 0, vcc_txendptr); + cardvcc_write(lvcc, 0, vcc_txcrc1); + cardvcc_write(lvcc, 0, vcc_txcrc2); + cardvcc_write(lvcc, 0, vcc_txaddr2); + cardvcc_write(lvcc, 0, vcc_txaddr1); +} + +/* -------------------- MANAGING AAL0 RX BUFFER: */ + +static inline int aal0_buffer_allocate(struct lanai_dev *lanai) +{ + DPRINTK("aal0_buffer_allocate: allocating AAL0 RX buffer\n"); + lanai_buf_allocate(&lanai->aal0buf, AAL0_RX_BUFFER_SIZE, 80, + lanai->pci); + return (lanai->aal0buf.start == NULL) ? -ENOMEM : 0; +} + +static inline void aal0_buffer_free(struct lanai_dev *lanai) +{ + DPRINTK("aal0_buffer_allocate: freeing AAL0 RX buffer\n"); + lanai_buf_deallocate(&lanai->aal0buf, lanai->pci); +} + +/* -------------------- EEPROM UTILITIES: */ + +/* Offsets of data in the EEPROM */ +#define EEPROM_COPYRIGHT (0) +#define EEPROM_COPYRIGHT_LEN (44) +#define EEPROM_CHECKSUM (62) +#define EEPROM_CHECKSUM_REV (63) +#define EEPROM_MAC (64) +#define EEPROM_MAC_REV (70) +#define EEPROM_SERIAL (112) +#define EEPROM_SERIAL_REV (116) +#define EEPROM_MAGIC (120) +#define EEPROM_MAGIC_REV (124) + +#define EEPROM_MAGIC_VALUE (0x5AB478D2) + +#ifndef READ_EEPROM + +/* Stub functions to use if EEPROM reading is disabled */ +static int eeprom_read(struct lanai_dev *lanai) +{ + printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n", + lanai->number); + memset(&lanai->eeprom[EEPROM_MAC], 0, 6); + return 0; +} + +static int eeprom_validate(struct lanai_dev *lanai) +{ + lanai->serialno = 0; + lanai->magicno = EEPROM_MAGIC_VALUE; + return 0; +} + +#else /* READ_EEPROM */ + +static int eeprom_read(struct lanai_dev *lanai) +{ + int i, address; + u8 data; + u32 tmp; +#define set_config1(x) do { lanai->conf1 = x; conf1_write(lanai); \ + } while (0) +#define clock_h() set_config1(lanai->conf1 | CONFIG1_PROMCLK) +#define clock_l() set_config1(lanai->conf1 &~ CONFIG1_PROMCLK) +#define data_h() set_config1(lanai->conf1 | CONFIG1_PROMDATA) +#define data_l() set_config1(lanai->conf1 &~ CONFIG1_PROMDATA) +#define pre_read() do { data_h(); clock_h(); udelay(5); } while (0) +#define read_pin() (reg_read(lanai, Status_Reg) & STATUS_PROMDATA) +#define send_stop() do { data_l(); udelay(5); clock_h(); udelay(5); \ + data_h(); udelay(5); } while (0) + /* start with both clock and data high */ + data_h(); clock_h(); udelay(5); + for (address = 0; address < LANAI_EEPROM_SIZE; address++) { + data = (address << 1) | 1; /* Command=read + address */ + /* send start bit */ + data_l(); udelay(5); + clock_l(); udelay(5); + for (i = 128; i != 0; i >>= 1) { /* write command out */ + tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) | + ((data & i) ? CONFIG1_PROMDATA : 0); + if (lanai->conf1 != tmp) { + set_config1(tmp); + udelay(5); /* Let new data settle */ + } + clock_h(); udelay(5); clock_l(); udelay(5); + } + /* look for ack */ + data_h(); clock_h(); udelay(5); + if (read_pin() != 0) + goto error; /* No ack seen */ + clock_l(); udelay(5); + /* read back result */ + for (data = 0, i = 7; i >= 0; i--) { + data_h(); clock_h(); udelay(5); + data = (data << 1) | !!read_pin(); + clock_l(); udelay(5); + } + /* look again for ack */ + data_h(); clock_h(); udelay(5); + if (read_pin() == 0) + goto error; /* Spurious ack */ + clock_l(); udelay(5); + send_stop(); + lanai->eeprom[address] = data; + DPRINTK("EEPROM 0x%04X %02X\n", + (unsigned int) address, (unsigned int) data); + } + return 0; + error: + clock_l(); udelay(5); /* finish read */ + send_stop(); + printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n", + lanai->number, address); + return -EIO; +#undef set_config1 +#undef clock_h +#undef clock_l +#undef data_h +#undef data_l +#undef pre_read +#undef read_pin +#undef send_stop +} + +/* read a big-endian 4-byte value out of eeprom */ +static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address) +{ + return be32_to_cpup((const u32 *) &lanai->eeprom[address]); +} + +/* Checksum/validate EEPROM contents */ +static int eeprom_validate(struct lanai_dev *lanai) +{ + int i, s; + u32 v; + const u8 *e = lanai->eeprom; +#ifdef DEBUG + /* First, see if we can get an ASCIIZ string out of the copyright */ + for (i = EEPROM_COPYRIGHT; + i < (EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN); i++) + if (e[i] < 0x20 || e[i] > 0x7E) + break; + if ( i != EEPROM_COPYRIGHT && + i != EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN && e[i] == '\0') + DPRINTK("eeprom: copyright = \"%s\"\n", + (char *) &e[EEPROM_COPYRIGHT]); + else + DPRINTK("eeprom: copyright not found\n"); +#endif + /* Validate checksum */ + for (i = s = 0; i < EEPROM_CHECKSUM; i++) + s += e[i]; + s &= 0xFF; + if (s != e[EEPROM_CHECKSUM]) { + printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad " + "(wanted 0x%02X, got 0x%02X)\n", lanai->number, + (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM]); + return -EIO; + } + s ^= 0xFF; + if (s != e[EEPROM_CHECKSUM_REV]) { + printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum " + "bad (wanted 0x%02X, got 0x%02X)\n", lanai->number, + (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM_REV]); + return -EIO; + } + /* Verify MAC address */ + for (i = 0; i < 6; i++) + if ((e[EEPROM_MAC + i] ^ e[EEPROM_MAC_REV + i]) != 0xFF) { + printk(KERN_ERR DEV_LABEL + "(itf %d) : EEPROM MAC addresses don't match " + "(0x%02X, inverse 0x%02X)\n", lanai->number, + (unsigned int) e[EEPROM_MAC + i], + (unsigned int) e[EEPROM_MAC_REV + i]); + return -EIO; + } + DPRINTK("eeprom: MAC address = %pM\n", &e[EEPROM_MAC]); + /* Verify serial number */ + lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL); + v = eeprom_be4(lanai, EEPROM_SERIAL_REV); + if ((lanai->serialno ^ v) != 0xFFFFFFFF) { + printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers " + "don't match (0x%08X, inverse 0x%08X)\n", lanai->number, + (unsigned int) lanai->serialno, (unsigned int) v); + return -EIO; + } + DPRINTK("eeprom: Serial number = %d\n", (unsigned int) lanai->serialno); + /* Verify magic number */ + lanai->magicno = eeprom_be4(lanai, EEPROM_MAGIC); + v = eeprom_be4(lanai, EEPROM_MAGIC_REV); + if ((lanai->magicno ^ v) != 0xFFFFFFFF) { + printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers " + "don't match (0x%08X, inverse 0x%08X)\n", lanai->number, + lanai->magicno, v); + return -EIO; + } + DPRINTK("eeprom: Magic number = 0x%08X\n", lanai->magicno); + if (lanai->magicno != EEPROM_MAGIC_VALUE) + printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM " + "magic not what expected (got 0x%08X, not 0x%08X)\n", + lanai->number, (unsigned int) lanai->magicno, + (unsigned int) EEPROM_MAGIC_VALUE); + return 0; +} + +#endif /* READ_EEPROM */ + +static inline const u8 *eeprom_mac(const struct lanai_dev *lanai) +{ + return &lanai->eeprom[EEPROM_MAC]; +} + +/* -------------------- INTERRUPT HANDLING UTILITIES: */ + +/* Interrupt types */ +#define INT_STATS (0x00000002) /* Statistics counter overflow */ +#define INT_SOOL (0x00000004) /* SOOL changed state */ +#define INT_LOCD (0x00000008) /* LOCD changed state */ +#define INT_LED (0x00000010) /* LED (HAPPI) changed state */ +#define INT_GPIN (0x00000020) /* GPIN changed state */ +#define INT_PING (0x00000040) /* PING_COUNT fulfilled */ +#define INT_WAKE (0x00000080) /* Lanai wants bus */ +#define INT_CBR0 (0x00000100) /* CBR sched hit VCI 0 */ +#define INT_LOCK (0x00000200) /* Service list overflow */ +#define INT_MISMATCH (0x00000400) /* TX magic list mismatch */ +#define INT_AAL0_STR (0x00000800) /* Non-AAL5 buffer half filled */ +#define INT_AAL0 (0x00001000) /* Non-AAL5 data available */ +#define INT_SERVICE (0x00002000) /* Service list entries available */ +#define INT_TABORTSENT (0x00004000) /* Target abort sent by lanai */ +#define INT_TABORTBM (0x00008000) /* Abort rcv'd as bus master */ +#define INT_TIMEOUTBM (0x00010000) /* No response to bus master */ +#define INT_PCIPARITY (0x00020000) /* Parity error on PCI */ + +/* Sets of the above */ +#define INT_ALL (0x0003FFFE) /* All interrupts */ +#define INT_STATUS (0x0000003C) /* Some status pin changed */ +#define INT_DMASHUT (0x00038000) /* DMA engine got shut down */ +#define INT_SEGSHUT (0x00000700) /* Segmentation got shut down */ + +static inline u32 intr_pending(const struct lanai_dev *lanai) +{ + return reg_read(lanai, IntStatusMasked_Reg); +} + +static inline void intr_enable(const struct lanai_dev *lanai, u32 i) +{ + reg_write(lanai, i, IntControlEna_Reg); +} + +static inline void intr_disable(const struct lanai_dev *lanai, u32 i) +{ + reg_write(lanai, i, IntControlDis_Reg); +} + +/* -------------------- CARD/PCI STATUS: */ + +static void status_message(int itf, const char *name, int status) +{ + static const char *onoff[2] = { "off to on", "on to off" }; + printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n", + itf, name, onoff[!status]); +} + +static void lanai_check_status(struct lanai_dev *lanai) +{ + u32 new = reg_read(lanai, Status_Reg); + u32 changes = new ^ lanai->status; + lanai->status = new; +#define e(flag, name) \ + if (changes & flag) \ + status_message(lanai->number, name, new & flag) + e(STATUS_SOOL, "SOOL"); + e(STATUS_LOCD, "LOCD"); + e(STATUS_LED, "LED"); + e(STATUS_GPIN, "GPIN"); +#undef e +} + +static void pcistatus_got(int itf, const char *name) +{ + printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name); +} + +static void pcistatus_check(struct lanai_dev *lanai, int clearonly) +{ + u16 s; + int result; + result = pci_read_config_word(lanai->pci, PCI_STATUS, &s); + if (result != PCIBIOS_SUCCESSFUL) { + printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: " + "%d\n", lanai->number, result); + return; + } + s &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | + PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY; + if (s == 0) + return; + result = pci_write_config_word(lanai->pci, PCI_STATUS, s); + if (result != PCIBIOS_SUCCESSFUL) + printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: " + "%d\n", lanai->number, result); + if (clearonly) + return; +#define e(flag, name, stat) \ + if (s & flag) { \ + pcistatus_got(lanai->number, name); \ + ++lanai->stats.pcierr_##stat; \ + } + e(PCI_STATUS_DETECTED_PARITY, "parity", parity_detect); + e(PCI_STATUS_SIG_SYSTEM_ERROR, "signalled system", serr_set); + e(PCI_STATUS_REC_MASTER_ABORT, "master", master_abort); + e(PCI_STATUS_REC_TARGET_ABORT, "master target", m_target_abort); + e(PCI_STATUS_SIG_TARGET_ABORT, "slave", s_target_abort); + e(PCI_STATUS_PARITY, "master parity", master_parity); +#undef e +} + +/* -------------------- VCC TX BUFFER UTILITIES: */ + +/* space left in tx buffer in bytes */ +static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr) +{ + int r; + r = endptr * 16; + r -= ((unsigned long) lvcc->tx.buf.ptr) - + ((unsigned long) lvcc->tx.buf.start); + r -= 16; /* Leave "bubble" - if start==end it looks empty */ + if (r < 0) + r += lanai_buf_size(&lvcc->tx.buf); + return r; +} + +/* test if VCC is currently backlogged */ +static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc) +{ + return !skb_queue_empty(&lvcc->tx.backlog); +} + +/* Bit fields in the segmentation buffer descriptor */ +#define DESCRIPTOR_MAGIC (0xD0000000) +#define DESCRIPTOR_AAL5 (0x00008000) +#define DESCRIPTOR_AAL5_STREAM (0x00004000) +#define DESCRIPTOR_CLP (0x00002000) + +/* Add 32-bit descriptor with its padding */ +static inline void vcc_tx_add_aal5_descriptor(struct lanai_vcc *lvcc, + u32 flags, int len) +{ + int pos; + APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 0, + "vcc_tx_add_aal5_descriptor: bad ptr=%p\n", lvcc->tx.buf.ptr); + lvcc->tx.buf.ptr += 4; /* Hope the values REALLY don't matter */ + pos = ((unsigned char *) lvcc->tx.buf.ptr) - + (unsigned char *) lvcc->tx.buf.start; + APRINTK((pos & ~0x0001FFF0) == 0, + "vcc_tx_add_aal5_descriptor: bad pos (%d) before, vci=%d, " + "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci, + lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end); + pos = (pos + len) & (lanai_buf_size(&lvcc->tx.buf) - 1); + APRINTK((pos & ~0x0001FFF0) == 0, + "vcc_tx_add_aal5_descriptor: bad pos (%d) after, vci=%d, " + "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci, + lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end); + lvcc->tx.buf.ptr[-1] = + cpu_to_le32(DESCRIPTOR_MAGIC | DESCRIPTOR_AAL5 | + ((lvcc->tx.atmvcc->atm_options & ATM_ATMOPT_CLP) ? + DESCRIPTOR_CLP : 0) | flags | pos >> 4); + if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end) + lvcc->tx.buf.ptr = lvcc->tx.buf.start; +} + +/* Add 32-bit AAL5 trailer and leave room for its CRC */ +static inline void vcc_tx_add_aal5_trailer(struct lanai_vcc *lvcc, + int len, int cpi, int uu) +{ + APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 8, + "vcc_tx_add_aal5_trailer: bad ptr=%p\n", lvcc->tx.buf.ptr); + lvcc->tx.buf.ptr += 2; + lvcc->tx.buf.ptr[-2] = cpu_to_be32((uu << 24) | (cpi << 16) | len); + if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end) + lvcc->tx.buf.ptr = lvcc->tx.buf.start; +} + +static inline void vcc_tx_memcpy(struct lanai_vcc *lvcc, + const unsigned char *src, int n) +{ + unsigned char *e; + int m; + e = ((unsigned char *) lvcc->tx.buf.ptr) + n; + m = e - (unsigned char *) lvcc->tx.buf.end; + if (m < 0) + m = 0; + memcpy(lvcc->tx.buf.ptr, src, n - m); + if (m != 0) { + memcpy(lvcc->tx.buf.start, src + n - m, m); + e = ((unsigned char *) lvcc->tx.buf.start) + m; + } + lvcc->tx.buf.ptr = (u32 *) e; +} + +static inline void vcc_tx_memzero(struct lanai_vcc *lvcc, int n) +{ + unsigned char *e; + int m; + if (n == 0) + return; + e = ((unsigned char *) lvcc->tx.buf.ptr) + n; + m = e - (unsigned char *) lvcc->tx.buf.end; + if (m < 0) + m = 0; + memset(lvcc->tx.buf.ptr, 0, n - m); + if (m != 0) { + memset(lvcc->tx.buf.start, 0, m); + e = ((unsigned char *) lvcc->tx.buf.start) + m; + } + lvcc->tx.buf.ptr = (u32 *) e; +} + +/* Update "butt" register to specify new WritePtr */ +static inline void lanai_endtx(struct lanai_dev *lanai, + const struct lanai_vcc *lvcc) +{ + int i, ptr = ((unsigned char *) lvcc->tx.buf.ptr) - + (unsigned char *) lvcc->tx.buf.start; + APRINTK((ptr & ~0x0001FFF0) == 0, + "lanai_endtx: bad ptr (%d), vci=%d, start,ptr,end=%p,%p,%p\n", + ptr, lvcc->vci, lvcc->tx.buf.start, lvcc->tx.buf.ptr, + lvcc->tx.buf.end); + + /* + * Since the "butt register" is a shared resounce on the card we + * serialize all accesses to it through this spinlock. This is + * mostly just paranoia since the register is rarely "busy" anyway + * but is needed for correctness. + */ + spin_lock(&lanai->endtxlock); + /* + * We need to check if the "butt busy" bit is set before + * updating the butt register. In theory this should + * never happen because the ATM card is plenty fast at + * updating the register. Still, we should make sure + */ + for (i = 0; reg_read(lanai, Status_Reg) & STATUS_BUTTBUSY; i++) { + if (unlikely(i > 50)) { + printk(KERN_ERR DEV_LABEL "(itf %d): butt register " + "always busy!\n", lanai->number); + break; + } + udelay(5); + } + /* + * Before we tall the card to start work we need to be sure 100% of + * the info in the service buffer has been written before we tell + * the card about it + */ + wmb(); + reg_write(lanai, (ptr << 12) | lvcc->vci, Butt_Reg); + spin_unlock(&lanai->endtxlock); +} + +/* + * Add one AAL5 PDU to lvcc's transmit buffer. Caller garauntees there's + * space available. "pdusize" is the number of bytes the PDU will take + */ +static void lanai_send_one_aal5(struct lanai_dev *lanai, + struct lanai_vcc *lvcc, struct sk_buff *skb, int pdusize) +{ + int pad; + APRINTK(pdusize == aal5_size(skb->len), + "lanai_send_one_aal5: wrong size packet (%d != %d)\n", + pdusize, aal5_size(skb->len)); + vcc_tx_add_aal5_descriptor(lvcc, 0, pdusize); + pad = pdusize - skb->len - 8; + APRINTK(pad >= 0, "pad is negative (%d)\n", pad); + APRINTK(pad < 48, "pad is too big (%d)\n", pad); + vcc_tx_memcpy(lvcc, skb->data, skb->len); + vcc_tx_memzero(lvcc, pad); + vcc_tx_add_aal5_trailer(lvcc, skb->len, 0, 0); + lanai_endtx(lanai, lvcc); + lanai_free_skb(lvcc->tx.atmvcc, skb); + atomic_inc(&lvcc->tx.atmvcc->stats->tx); +} + +/* Try to fill the buffer - don't call unless there is backlog */ +static void vcc_tx_unqueue_aal5(struct lanai_dev *lanai, + struct lanai_vcc *lvcc, int endptr) +{ + int n; + struct sk_buff *skb; + int space = vcc_tx_space(lvcc, endptr); + APRINTK(vcc_is_backlogged(lvcc), + "vcc_tx_unqueue() called with empty backlog (vci=%d)\n", + lvcc->vci); + while (space >= 64) { + skb = skb_dequeue(&lvcc->tx.backlog); + if (skb == NULL) + goto no_backlog; + n = aal5_size(skb->len); + if (n + 16 > space) { + /* No room for this packet - put it back on queue */ + skb_queue_head(&lvcc->tx.backlog, skb); + return; + } + lanai_send_one_aal5(lanai, lvcc, skb, n); + space -= n + 16; + } + if (!vcc_is_backlogged(lvcc)) { + no_backlog: + __clear_bit(lvcc->vci, lanai->backlog_vccs); + } +} + +/* Given an skb that we want to transmit either send it now or queue */ +static void vcc_tx_aal5(struct lanai_dev *lanai, struct lanai_vcc *lvcc, + struct sk_buff *skb) +{ + int space, n; + if (vcc_is_backlogged(lvcc)) /* Already backlogged */ + goto queue_it; + space = vcc_tx_space(lvcc, + TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr))); + n = aal5_size(skb->len); + APRINTK(n + 16 >= 64, "vcc_tx_aal5: n too small (%d)\n", n); + if (space < n + 16) { /* No space for this PDU */ + __set_bit(lvcc->vci, lanai->backlog_vccs); + queue_it: + skb_queue_tail(&lvcc->tx.backlog, skb); + return; + } + lanai_send_one_aal5(lanai, lvcc, skb, n); +} + +static void vcc_tx_unqueue_aal0(struct lanai_dev *lanai, + struct lanai_vcc *lvcc, int endptr) +{ + printk(KERN_INFO DEV_LABEL + ": vcc_tx_unqueue_aal0: not implemented\n"); +} + +static void vcc_tx_aal0(struct lanai_dev *lanai, struct lanai_vcc *lvcc, + struct sk_buff *skb) +{ + printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n"); + /* Remember to increment lvcc->tx.atmvcc->stats->tx */ + lanai_free_skb(lvcc->tx.atmvcc, skb); +} + +/* -------------------- VCC RX BUFFER UTILITIES: */ + +/* unlike the _tx_ cousins, this doesn't update ptr */ +static inline void vcc_rx_memcpy(unsigned char *dest, + const struct lanai_vcc *lvcc, int n) +{ + int m = ((const unsigned char *) lvcc->rx.buf.ptr) + n - + ((const unsigned char *) (lvcc->rx.buf.end)); + if (m < 0) + m = 0; + memcpy(dest, lvcc->rx.buf.ptr, n - m); + memcpy(dest + n - m, lvcc->rx.buf.start, m); + /* Make sure that these copies don't get reordered */ + barrier(); +} + +/* Receive AAL5 data on a VCC with a particular endptr */ +static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr) +{ + int size; + struct sk_buff *skb; + const u32 *x; + u32 *end = &lvcc->rx.buf.start[endptr * 4]; + int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr); + if (n < 0) + n += lanai_buf_size(&lvcc->rx.buf); + APRINTK(n >= 0 && n < lanai_buf_size(&lvcc->rx.buf) && !(n & 15), + "vcc_rx_aal5: n out of range (%d/%zu)\n", + n, lanai_buf_size(&lvcc->rx.buf)); + /* Recover the second-to-last word to get true pdu length */ + if ((x = &end[-2]) < lvcc->rx.buf.start) + x = &lvcc->rx.buf.end[-2]; + /* + * Before we actually read from the buffer, make sure the memory + * changes have arrived + */ + rmb(); + size = be32_to_cpup(x) & 0xffff; + if (unlikely(n != aal5_size(size))) { + /* Make sure size matches padding */ + printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length " + "on vci=%d - size=%d n=%d\n", + lvcc->rx.atmvcc->dev->number, lvcc->vci, size, n); + lvcc->stats.x.aal5.rx_badlen++; + goto out; + } + skb = atm_alloc_charge(lvcc->rx.atmvcc, size, GFP_ATOMIC); + if (unlikely(skb == NULL)) { + lvcc->stats.rx_nomem++; + goto out; + } + skb_put(skb, size); + vcc_rx_memcpy(skb->data, lvcc, size); + ATM_SKB(skb)->vcc = lvcc->rx.atmvcc; + __net_timestamp(skb); + lvcc->rx.atmvcc->push(lvcc->rx.atmvcc, skb); + atomic_inc(&lvcc->rx.atmvcc->stats->rx); + out: + lvcc->rx.buf.ptr = end; + cardvcc_write(lvcc, endptr, vcc_rxreadptr); +} + +static void vcc_rx_aal0(struct lanai_dev *lanai) +{ + printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n"); + /* Remember to get read_lock(&vcc_sklist_lock) while looking up VC */ + /* Remember to increment lvcc->rx.atmvcc->stats->rx */ +} + +/* -------------------- MANAGING HOST-BASED VCC TABLE: */ + +/* Decide whether to use vmalloc or get_zeroed_page for VCC table */ +#if (NUM_VCI * BITS_PER_LONG) <= PAGE_SIZE +#define VCCTABLE_GETFREEPAGE +#else +#include <linux/vmalloc.h> +#endif + +static int vcc_table_allocate(struct lanai_dev *lanai) +{ +#ifdef VCCTABLE_GETFREEPAGE + APRINTK((lanai->num_vci) * sizeof(struct lanai_vcc *) <= PAGE_SIZE, + "vcc table > PAGE_SIZE!"); + lanai->vccs = (struct lanai_vcc **) get_zeroed_page(GFP_KERNEL); + return (lanai->vccs == NULL) ? -ENOMEM : 0; +#else + int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *); + lanai->vccs = vzalloc(bytes); + if (unlikely(lanai->vccs == NULL)) + return -ENOMEM; + return 0; +#endif +} + +static inline void vcc_table_deallocate(const struct lanai_dev *lanai) +{ +#ifdef VCCTABLE_GETFREEPAGE + free_page((unsigned long) lanai->vccs); +#else + vfree(lanai->vccs); +#endif +} + +/* Allocate a fresh lanai_vcc, with the appropriate things cleared */ +static inline struct lanai_vcc *new_lanai_vcc(void) +{ + struct lanai_vcc *lvcc; + lvcc = kzalloc(sizeof(*lvcc), GFP_KERNEL); + if (likely(lvcc != NULL)) { + skb_queue_head_init(&lvcc->tx.backlog); +#ifdef DEBUG + lvcc->vci = -1; +#endif + } + return lvcc; +} + +static int lanai_get_sized_buffer(struct lanai_dev *lanai, + struct lanai_buffer *buf, int max_sdu, int multiplier, + const char *name) +{ + int size; + if (unlikely(max_sdu < 1)) + max_sdu = 1; + max_sdu = aal5_size(max_sdu); + size = (max_sdu + 16) * multiplier + 16; + lanai_buf_allocate(buf, size, max_sdu + 32, lanai->pci); + if (unlikely(buf->start == NULL)) + return -ENOMEM; + if (unlikely(lanai_buf_size(buf) < size)) + printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes " + "for %s buffer, got only %zu\n", lanai->number, size, + name, lanai_buf_size(buf)); + DPRINTK("Allocated %zu byte %s buffer\n", lanai_buf_size(buf), name); + return 0; +} + +/* Setup a RX buffer for a currently unbound AAL5 vci */ +static inline int lanai_setup_rx_vci_aal5(struct lanai_dev *lanai, + struct lanai_vcc *lvcc, const struct atm_qos *qos) +{ + return lanai_get_sized_buffer(lanai, &lvcc->rx.buf, + qos->rxtp.max_sdu, AAL5_RX_MULTIPLIER, "RX"); +} + +/* Setup a TX buffer for a currently unbound AAL5 vci */ +static int lanai_setup_tx_vci(struct lanai_dev *lanai, struct lanai_vcc *lvcc, + const struct atm_qos *qos) +{ + int max_sdu, multiplier; + if (qos->aal == ATM_AAL0) { + lvcc->tx.unqueue = vcc_tx_unqueue_aal0; + max_sdu = ATM_CELL_SIZE - 1; + multiplier = AAL0_TX_MULTIPLIER; + } else { + lvcc->tx.unqueue = vcc_tx_unqueue_aal5; + max_sdu = qos->txtp.max_sdu; + multiplier = AAL5_TX_MULTIPLIER; + } + return lanai_get_sized_buffer(lanai, &lvcc->tx.buf, max_sdu, + multiplier, "TX"); +} + +static inline void host_vcc_bind(struct lanai_dev *lanai, + struct lanai_vcc *lvcc, vci_t vci) +{ + if (lvcc->vbase != NULL) + return; /* We already were bound in the other direction */ + DPRINTK("Binding vci %d\n", vci); +#ifdef USE_POWERDOWN + if (lanai->nbound++ == 0) { + DPRINTK("Coming out of powerdown\n"); + lanai->conf1 &= ~CONFIG1_POWERDOWN; + conf1_write(lanai); + conf2_write(lanai); + } +#endif + lvcc->vbase = cardvcc_addr(lanai, vci); + lanai->vccs[lvcc->vci = vci] = lvcc; +} + +static inline void host_vcc_unbind(struct lanai_dev *lanai, + struct lanai_vcc *lvcc) +{ + if (lvcc->vbase == NULL) + return; /* This vcc was never bound */ + DPRINTK("Unbinding vci %d\n", lvcc->vci); + lvcc->vbase = NULL; + lanai->vccs[lvcc->vci] = NULL; +#ifdef USE_POWERDOWN + if (--lanai->nbound == 0) { + DPRINTK("Going into powerdown\n"); + lanai->conf1 |= CONFIG1_POWERDOWN; + conf1_write(lanai); + } +#endif +} + +/* -------------------- RESET CARD: */ + +static void lanai_reset(struct lanai_dev *lanai) +{ + printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not " + "implemented\n", lanai->number); + /* TODO */ + /* The following is just a hack until we write the real + * resetter - at least ack whatever interrupt sent us + * here + */ + reg_write(lanai, INT_ALL, IntAck_Reg); + lanai->stats.card_reset++; +} + +/* -------------------- SERVICE LIST UTILITIES: */ + +/* + * Allocate service buffer and tell card about it + */ +static int service_buffer_allocate(struct lanai_dev *lanai) +{ + lanai_buf_allocate(&lanai->service, SERVICE_ENTRIES * 4, 8, + lanai->pci); + if (unlikely(lanai->service.start == NULL)) + return -ENOMEM; + DPRINTK("allocated service buffer at %p, size %zu(%d)\n", + lanai->service.start, + lanai_buf_size(&lanai->service), + lanai_buf_size_cardorder(&lanai->service)); + /* Clear ServWrite register to be safe */ + reg_write(lanai, 0, ServWrite_Reg); + /* ServiceStuff register contains size and address of buffer */ + reg_write(lanai, + SSTUFF_SET_SIZE(lanai_buf_size_cardorder(&lanai->service)) | + SSTUFF_SET_ADDR(lanai->service.dmaaddr), + ServiceStuff_Reg); + return 0; +} + +static inline void service_buffer_deallocate(struct lanai_dev *lanai) +{ + lanai_buf_deallocate(&lanai->service, lanai->pci); +} + +/* Bitfields in service list */ +#define SERVICE_TX (0x80000000) /* Was from transmission */ +#define SERVICE_TRASH (0x40000000) /* RXed PDU was trashed */ +#define SERVICE_CRCERR (0x20000000) /* RXed PDU had CRC error */ +#define SERVICE_CI (0x10000000) /* RXed PDU had CI set */ +#define SERVICE_CLP (0x08000000) /* RXed PDU had CLP set */ +#define SERVICE_STREAM (0x04000000) /* RX Stream mode */ +#define SERVICE_GET_VCI(x) (((x)>>16)&0x3FF) +#define SERVICE_GET_END(x) ((x)&0x1FFF) + +/* Handle one thing from the service list - returns true if it marked a + * VCC ready for xmit + */ +static int handle_service(struct lanai_dev *lanai, u32 s) +{ + vci_t vci = SERVICE_GET_VCI(s); + struct lanai_vcc *lvcc; + read_lock(&vcc_sklist_lock); + lvcc = lanai->vccs[vci]; + if (unlikely(lvcc == NULL)) { + read_unlock(&vcc_sklist_lock); + DPRINTK("(itf %d) got service entry 0x%X for nonexistent " + "vcc %d\n", lanai->number, (unsigned int) s, vci); + if (s & SERVICE_TX) + lanai->stats.service_notx++; + else + lanai->stats.service_norx++; + return 0; + } + if (s & SERVICE_TX) { /* segmentation interrupt */ + if (unlikely(lvcc->tx.atmvcc == NULL)) { + read_unlock(&vcc_sklist_lock); + DPRINTK("(itf %d) got service entry 0x%X for non-TX " + "vcc %d\n", lanai->number, (unsigned int) s, vci); + lanai->stats.service_notx++; + return 0; + } + __set_bit(vci, lanai->transmit_ready); + lvcc->tx.endptr = SERVICE_GET_END(s); + read_unlock(&vcc_sklist_lock); + return 1; + } + if (unlikely(lvcc->rx.atmvcc == NULL)) { + read_unlock(&vcc_sklist_lock); + DPRINTK("(itf %d) got service entry 0x%X for non-RX " + "vcc %d\n", lanai->number, (unsigned int) s, vci); + lanai->stats.service_norx++; + return 0; + } + if (unlikely(lvcc->rx.atmvcc->qos.aal != ATM_AAL5)) { + read_unlock(&vcc_sklist_lock); + DPRINTK("(itf %d) got RX service entry 0x%X for non-AAL5 " + "vcc %d\n", lanai->number, (unsigned int) s, vci); + lanai->stats.service_rxnotaal5++; + atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); + return 0; + } + if (likely(!(s & (SERVICE_TRASH | SERVICE_STREAM | SERVICE_CRCERR)))) { + vcc_rx_aal5(lvcc, SERVICE_GET_END(s)); + read_unlock(&vcc_sklist_lock); + return 0; + } + if (s & SERVICE_TRASH) { + int bytes; + read_unlock(&vcc_sklist_lock); + DPRINTK("got trashed rx pdu on vci %d\n", vci); + atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); + lvcc->stats.x.aal5.service_trash++; + bytes = (SERVICE_GET_END(s) * 16) - + (((unsigned long) lvcc->rx.buf.ptr) - + ((unsigned long) lvcc->rx.buf.start)) + 47; + if (bytes < 0) + bytes += lanai_buf_size(&lvcc->rx.buf); + lanai->stats.ovfl_trash += (bytes / 48); + return 0; + } + if (s & SERVICE_STREAM) { + read_unlock(&vcc_sklist_lock); + atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); + lvcc->stats.x.aal5.service_stream++; + printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream " + "PDU on VCI %d!\n", lanai->number, vci); + lanai_reset(lanai); + return 0; + } + DPRINTK("got rx crc error on vci %d\n", vci); + atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); + lvcc->stats.x.aal5.service_rxcrc++; + lvcc->rx.buf.ptr = &lvcc->rx.buf.start[SERVICE_GET_END(s) * 4]; + cardvcc_write(lvcc, SERVICE_GET_END(s), vcc_rxreadptr); + read_unlock(&vcc_sklist_lock); + return 0; +} + +/* Try transmitting on all VCIs that we marked ready to serve */ +static void iter_transmit(struct lanai_dev *lanai, vci_t vci) +{ + struct lanai_vcc *lvcc = lanai->vccs[vci]; + if (vcc_is_backlogged(lvcc)) + lvcc->tx.unqueue(lanai, lvcc, lvcc->tx.endptr); +} + +/* Run service queue -- called from interrupt context or with + * interrupts otherwise disabled and with the lanai->servicelock + * lock held + */ +static void run_service(struct lanai_dev *lanai) +{ + int ntx = 0; + u32 wreg = reg_read(lanai, ServWrite_Reg); + const u32 *end = lanai->service.start + wreg; + while (lanai->service.ptr != end) { + ntx += handle_service(lanai, + le32_to_cpup(lanai->service.ptr++)); + if (lanai->service.ptr >= lanai->service.end) + lanai->service.ptr = lanai->service.start; + } + reg_write(lanai, wreg, ServRead_Reg); + if (ntx != 0) { + read_lock(&vcc_sklist_lock); + vci_bitfield_iterate(lanai, lanai->transmit_ready, + iter_transmit); + bitmap_zero(lanai->transmit_ready, NUM_VCI); + read_unlock(&vcc_sklist_lock); + } +} + +/* -------------------- GATHER STATISTICS: */ + +static void get_statistics(struct lanai_dev *lanai) +{ + u32 statreg = reg_read(lanai, Statistics_Reg); + lanai->stats.atm_ovfl += STATS_GET_FIFO_OVFL(statreg); + lanai->stats.hec_err += STATS_GET_HEC_ERR(statreg); + lanai->stats.vci_trash += STATS_GET_BAD_VCI(statreg); + lanai->stats.ovfl_trash += STATS_GET_BUF_OVFL(statreg); +} + +/* -------------------- POLLING TIMER: */ + +#ifndef DEBUG_RW +/* Try to undequeue 1 backlogged vcc */ +static void iter_dequeue(struct lanai_dev *lanai, vci_t vci) +{ + struct lanai_vcc *lvcc = lanai->vccs[vci]; + int endptr; + if (lvcc == NULL || lvcc->tx.atmvcc == NULL || + !vcc_is_backlogged(lvcc)) { + __clear_bit(vci, lanai->backlog_vccs); + return; + } + endptr = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)); + lvcc->tx.unqueue(lanai, lvcc, endptr); +} +#endif /* !DEBUG_RW */ + +static void lanai_timed_poll(struct timer_list *t) +{ + struct lanai_dev *lanai = from_timer(lanai, t, timer); +#ifndef DEBUG_RW + unsigned long flags; +#ifdef USE_POWERDOWN + if (lanai->conf1 & CONFIG1_POWERDOWN) + return; +#endif /* USE_POWERDOWN */ + local_irq_save(flags); + /* If we can grab the spinlock, check if any services need to be run */ + if (spin_trylock(&lanai->servicelock)) { + run_service(lanai); + spin_unlock(&lanai->servicelock); + } + /* ...and see if any backlogged VCs can make progress */ + /* unfortunately linux has no read_trylock() currently */ + read_lock(&vcc_sklist_lock); + vci_bitfield_iterate(lanai, lanai->backlog_vccs, iter_dequeue); + read_unlock(&vcc_sklist_lock); + local_irq_restore(flags); + + get_statistics(lanai); +#endif /* !DEBUG_RW */ + mod_timer(&lanai->timer, jiffies + LANAI_POLL_PERIOD); +} + +static inline void lanai_timed_poll_start(struct lanai_dev *lanai) +{ + timer_setup(&lanai->timer, lanai_timed_poll, 0); + lanai->timer.expires = jiffies + LANAI_POLL_PERIOD; + add_timer(&lanai->timer); +} + +static inline void lanai_timed_poll_stop(struct lanai_dev *lanai) +{ + del_timer_sync(&lanai->timer); +} + +/* -------------------- INTERRUPT SERVICE: */ + +static inline void lanai_int_1(struct lanai_dev *lanai, u32 reason) +{ + u32 ack = 0; + if (reason & INT_SERVICE) { + ack = INT_SERVICE; + spin_lock(&lanai->servicelock); + run_service(lanai); + spin_unlock(&lanai->servicelock); + } + if (reason & (INT_AAL0_STR | INT_AAL0)) { + ack |= reason & (INT_AAL0_STR | INT_AAL0); + vcc_rx_aal0(lanai); + } + /* The rest of the interrupts are pretty rare */ + if (ack == reason) + goto done; + if (reason & INT_STATS) { + reason &= ~INT_STATS; /* No need to ack */ + get_statistics(lanai); + } + if (reason & INT_STATUS) { + ack |= reason & INT_STATUS; + lanai_check_status(lanai); + } + if (unlikely(reason & INT_DMASHUT)) { + printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA " + "shutdown, reason=0x%08X, address=0x%08X\n", + lanai->number, (unsigned int) (reason & INT_DMASHUT), + (unsigned int) reg_read(lanai, DMA_Addr_Reg)); + if (reason & INT_TABORTBM) { + lanai_reset(lanai); + return; + } + ack |= (reason & INT_DMASHUT); + printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n", + lanai->number); + conf1_write(lanai); + lanai->stats.dma_reenable++; + pcistatus_check(lanai, 0); + } + if (unlikely(reason & INT_TABORTSENT)) { + ack |= (reason & INT_TABORTSENT); + printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n", + lanai->number); + pcistatus_check(lanai, 0); + } + if (unlikely(reason & INT_SEGSHUT)) { + printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " + "segmentation shutdown, reason=0x%08X\n", lanai->number, + (unsigned int) (reason & INT_SEGSHUT)); + lanai_reset(lanai); + return; + } + if (unlikely(reason & (INT_PING | INT_WAKE))) { + printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " + "unexpected interrupt 0x%08X, resetting\n", + lanai->number, + (unsigned int) (reason & (INT_PING | INT_WAKE))); + lanai_reset(lanai); + return; + } +#ifdef DEBUG + if (unlikely(ack != reason)) { + DPRINTK("unacked ints: 0x%08X\n", + (unsigned int) (reason & ~ack)); + ack = reason; + } +#endif + done: + if (ack != 0) + reg_write(lanai, ack, IntAck_Reg); +} + +static irqreturn_t lanai_int(int irq, void *devid) +{ + struct lanai_dev *lanai = devid; + u32 reason; + +#ifdef USE_POWERDOWN + /* + * If we're powered down we shouldn't be generating any interrupts - + * so assume that this is a shared interrupt line and it's for someone + * else + */ + if (unlikely(lanai->conf1 & CONFIG1_POWERDOWN)) + return IRQ_NONE; +#endif + + reason = intr_pending(lanai); + if (reason == 0) + return IRQ_NONE; /* Must be for someone else */ + + do { + if (unlikely(reason == 0xFFFFFFFF)) + break; /* Maybe we've been unplugged? */ + lanai_int_1(lanai, reason); + reason = intr_pending(lanai); + } while (reason != 0); + + return IRQ_HANDLED; +} + +/* TODO - it would be nice if we could use the "delayed interrupt" system + * to some advantage + */ + +/* -------------------- CHECK BOARD ID/REV: */ + +/* + * The board id and revision are stored both in the reset register and + * in the PCI configuration space - the documentation says to check + * each of them. If revp!=NULL we store the revision there + */ +static int check_board_id_and_rev(const char *name, u32 val, int *revp) +{ + DPRINTK("%s says board_id=%d, board_rev=%d\n", name, + (int) RESET_GET_BOARD_ID(val), + (int) RESET_GET_BOARD_REV(val)); + if (RESET_GET_BOARD_ID(val) != BOARD_ID_LANAI256) { + printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a " + "Lanai 25.6\n", name, (int) RESET_GET_BOARD_ID(val)); + return -ENODEV; + } + if (revp != NULL) + *revp = RESET_GET_BOARD_REV(val); + return 0; +} + +/* -------------------- PCI INITIALIZATION/SHUTDOWN: */ + +static int lanai_pci_start(struct lanai_dev *lanai) +{ + struct pci_dev *pci = lanai->pci; + int result; + + if (pci_enable_device(pci) != 0) { + printk(KERN_ERR DEV_LABEL "(itf %d): can't enable " + "PCI device", lanai->number); + return -ENXIO; + } + pci_set_master(pci); + if (dma_set_mask_and_coherent(&pci->dev, DMA_BIT_MASK(32)) != 0) { + printk(KERN_WARNING DEV_LABEL + "(itf %d): No suitable DMA available.\n", lanai->number); + return -EBUSY; + } + result = check_board_id_and_rev("PCI", pci->subsystem_device, NULL); + if (result != 0) + return result; + /* Set latency timer to zero as per lanai docs */ + result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0); + if (result != PCIBIOS_SUCCESSFUL) { + printk(KERN_ERR DEV_LABEL "(itf %d): can't write " + "PCI_LATENCY_TIMER: %d\n", lanai->number, result); + return -EINVAL; + } + pcistatus_check(lanai, 1); + pcistatus_check(lanai, 0); + return 0; +} + +/* -------------------- VPI/VCI ALLOCATION: */ + +/* + * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll + * get a CBRZERO interrupt), and we can use it only if no one is receiving + * AAL0 traffic (since they will use the same queue) - according to the + * docs we shouldn't even use it for AAL0 traffic + */ +static inline int vci0_is_ok(struct lanai_dev *lanai, + const struct atm_qos *qos) +{ + if (qos->txtp.traffic_class == ATM_CBR || qos->aal == ATM_AAL0) + return 0; + if (qos->rxtp.traffic_class != ATM_NONE) { + if (lanai->naal0 != 0) + return 0; + lanai->conf2 |= CONFIG2_VCI0_NORMAL; + conf2_write_if_powerup(lanai); + } + return 1; +} + +/* return true if vci is currently unused, or if requested qos is + * compatible + */ +static int vci_is_ok(struct lanai_dev *lanai, vci_t vci, + const struct atm_vcc *atmvcc) +{ + const struct atm_qos *qos = &atmvcc->qos; + const struct lanai_vcc *lvcc = lanai->vccs[vci]; + if (vci == 0 && !vci0_is_ok(lanai, qos)) + return 0; + if (unlikely(lvcc != NULL)) { + if (qos->rxtp.traffic_class != ATM_NONE && + lvcc->rx.atmvcc != NULL && lvcc->rx.atmvcc != atmvcc) + return 0; + if (qos->txtp.traffic_class != ATM_NONE && + lvcc->tx.atmvcc != NULL && lvcc->tx.atmvcc != atmvcc) + return 0; + if (qos->txtp.traffic_class == ATM_CBR && + lanai->cbrvcc != NULL && lanai->cbrvcc != atmvcc) + return 0; + } + if (qos->aal == ATM_AAL0 && lanai->naal0 == 0 && + qos->rxtp.traffic_class != ATM_NONE) { + const struct lanai_vcc *vci0 = lanai->vccs[0]; + if (vci0 != NULL && vci0->rx.atmvcc != NULL) + return 0; + lanai->conf2 &= ~CONFIG2_VCI0_NORMAL; + conf2_write_if_powerup(lanai); + } + return 1; +} + +static int lanai_normalize_ci(struct lanai_dev *lanai, + const struct atm_vcc *atmvcc, short *vpip, vci_t *vcip) +{ + switch (*vpip) { + case ATM_VPI_ANY: + *vpip = 0; + fallthrough; + case 0: + break; + default: + return -EADDRINUSE; + } + switch (*vcip) { + case ATM_VCI_ANY: + for (*vcip = ATM_NOT_RSV_VCI; *vcip < lanai->num_vci; + (*vcip)++) + if (vci_is_ok(lanai, *vcip, atmvcc)) + return 0; + return -EADDRINUSE; + default: + if (*vcip >= lanai->num_vci || *vcip < 0 || + !vci_is_ok(lanai, *vcip, atmvcc)) + return -EADDRINUSE; + } + return 0; +} + +/* -------------------- MANAGE CBR: */ + +/* + * CBR ICG is stored as a fixed-point number with 4 fractional bits. + * Note that storing a number greater than 2046.0 will result in + * incorrect shaping + */ +#define CBRICG_FRAC_BITS (4) +#define CBRICG_MAX (2046 << CBRICG_FRAC_BITS) + +/* + * ICG is related to PCR with the formula PCR = MAXPCR / (ICG + 1) + * where MAXPCR is (according to the docs) 25600000/(54*8), + * which is equal to (3125<<9)/27. + * + * Solving for ICG, we get: + * ICG = MAXPCR/PCR - 1 + * ICG = (3125<<9)/(27*PCR) - 1 + * ICG = ((3125<<9) - (27*PCR)) / (27*PCR) + * + * The end result is supposed to be a fixed-point number with FRAC_BITS + * bits of a fractional part, so we keep everything in the numerator + * shifted by that much as we compute + * + */ +static int pcr_to_cbricg(const struct atm_qos *qos) +{ + int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */ + int x, icg, pcr = atm_pcr_goal(&qos->txtp); + if (pcr == 0) /* Use maximum bandwidth */ + return 0; + if (pcr < 0) { + rounddown = 1; + pcr = -pcr; + } + x = pcr * 27; + icg = (3125 << (9 + CBRICG_FRAC_BITS)) - (x << CBRICG_FRAC_BITS); + if (rounddown) + icg += x - 1; + icg /= x; + if (icg > CBRICG_MAX) + icg = CBRICG_MAX; + DPRINTK("pcr_to_cbricg: pcr=%d rounddown=%c icg=%d\n", + pcr, rounddown ? 'Y' : 'N', icg); + return icg; +} + +static inline void lanai_cbr_setup(struct lanai_dev *lanai) +{ + reg_write(lanai, pcr_to_cbricg(&lanai->cbrvcc->qos), CBR_ICG_Reg); + reg_write(lanai, lanai->cbrvcc->vci, CBR_PTR_Reg); + lanai->conf2 |= CONFIG2_CBR_ENABLE; + conf2_write(lanai); +} + +static inline void lanai_cbr_shutdown(struct lanai_dev *lanai) +{ + lanai->conf2 &= ~CONFIG2_CBR_ENABLE; + conf2_write(lanai); +} + +/* -------------------- OPERATIONS: */ + +/* setup a newly detected device */ +static int lanai_dev_open(struct atm_dev *atmdev) +{ + struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; + unsigned long raw_base; + int result; + + DPRINTK("In lanai_dev_open()\n"); + /* Basic device fields */ + lanai->number = atmdev->number; + lanai->num_vci = NUM_VCI; + bitmap_zero(lanai->backlog_vccs, NUM_VCI); + bitmap_zero(lanai->transmit_ready, NUM_VCI); + lanai->naal0 = 0; +#ifdef USE_POWERDOWN + lanai->nbound = 0; +#endif + lanai->cbrvcc = NULL; + memset(&lanai->stats, 0, sizeof lanai->stats); + spin_lock_init(&lanai->endtxlock); + spin_lock_init(&lanai->servicelock); + atmdev->ci_range.vpi_bits = 0; + atmdev->ci_range.vci_bits = 0; + while (1 << atmdev->ci_range.vci_bits < lanai->num_vci) + atmdev->ci_range.vci_bits++; + atmdev->link_rate = ATM_25_PCR; + + /* 3.2: PCI initialization */ + if ((result = lanai_pci_start(lanai)) != 0) + goto error; + raw_base = lanai->pci->resource[0].start; + lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE); + if (lanai->base == NULL) { + printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n"); + result = -ENOMEM; + goto error_pci; + } + /* 3.3: Reset lanai and PHY */ + reset_board(lanai); + lanai->conf1 = reg_read(lanai, Config1_Reg); + lanai->conf1 &= ~(CONFIG1_GPOUT1 | CONFIG1_POWERDOWN | + CONFIG1_MASK_LEDMODE); + lanai->conf1 |= CONFIG1_SET_LEDMODE(LEDMODE_NOT_SOOL); + reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg); + udelay(1000); + conf1_write(lanai); + + /* + * 3.4: Turn on endian mode for big-endian hardware + * We don't actually want to do this - the actual bit fields + * in the endian register are not documented anywhere. + * Instead we do the bit-flipping ourselves on big-endian + * hardware. + * + * 3.5: get the board ID/rev by reading the reset register + */ + result = check_board_id_and_rev("register", + reg_read(lanai, Reset_Reg), &lanai->board_rev); + if (result != 0) + goto error_unmap; + + /* 3.6: read EEPROM */ + if ((result = eeprom_read(lanai)) != 0) + goto error_unmap; + if ((result = eeprom_validate(lanai)) != 0) + goto error_unmap; + + /* 3.7: re-reset PHY, do loopback tests, setup PHY */ + reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg); + udelay(1000); + conf1_write(lanai); + /* TODO - loopback tests */ + lanai->conf1 |= (CONFIG1_GPOUT2 | CONFIG1_GPOUT3 | CONFIG1_DMA_ENABLE); + conf1_write(lanai); + + /* 3.8/3.9: test and initialize card SRAM */ + if ((result = sram_test_and_clear(lanai)) != 0) + goto error_unmap; + + /* 3.10: initialize lanai registers */ + lanai->conf1 |= CONFIG1_DMA_ENABLE; + conf1_write(lanai); + if ((result = service_buffer_allocate(lanai)) != 0) + goto error_unmap; + if ((result = vcc_table_allocate(lanai)) != 0) + goto error_service; + lanai->conf2 = (lanai->num_vci >= 512 ? CONFIG2_HOWMANY : 0) | + CONFIG2_HEC_DROP | /* ??? */ CONFIG2_PTI7_MODE; + conf2_write(lanai); + reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg); + reg_write(lanai, 0, CBR_ICG_Reg); /* CBR defaults to no limit */ + if ((result = request_irq(lanai->pci->irq, lanai_int, IRQF_SHARED, + DEV_LABEL, lanai)) != 0) { + printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n"); + goto error_vcctable; + } + mb(); /* Make sure that all that made it */ + intr_enable(lanai, INT_ALL & ~(INT_PING | INT_WAKE)); + /* 3.11: initialize loop mode (i.e. turn looping off) */ + lanai->conf1 = (lanai->conf1 & ~CONFIG1_MASK_LOOPMODE) | + CONFIG1_SET_LOOPMODE(LOOPMODE_NORMAL) | + CONFIG1_GPOUT2 | CONFIG1_GPOUT3; + conf1_write(lanai); + lanai->status = reg_read(lanai, Status_Reg); + /* We're now done initializing this card */ +#ifdef USE_POWERDOWN + lanai->conf1 |= CONFIG1_POWERDOWN; + conf1_write(lanai); +#endif + memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN); + lanai_timed_poll_start(lanai); + printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=%p, irq=%u " + "(%pMF)\n", lanai->number, (int) lanai->pci->revision, + lanai->base, lanai->pci->irq, atmdev->esi); + printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), " + "board_rev=%d\n", lanai->number, + lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno, + (unsigned int) lanai->serialno, lanai->board_rev); + return 0; + + error_vcctable: + vcc_table_deallocate(lanai); + error_service: + service_buffer_deallocate(lanai); + error_unmap: + reset_board(lanai); +#ifdef USE_POWERDOWN + lanai->conf1 = reg_read(lanai, Config1_Reg) | CONFIG1_POWERDOWN; + conf1_write(lanai); +#endif + iounmap(lanai->base); + lanai->base = NULL; + error_pci: + pci_disable_device(lanai->pci); + error: + return result; +} + +/* called when device is being shutdown, and all vcc's are gone - higher + * levels will deallocate the atm device for us + */ +static void lanai_dev_close(struct atm_dev *atmdev) +{ + struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; + if (lanai->base==NULL) + return; + printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n", + lanai->number); + lanai_timed_poll_stop(lanai); +#ifdef USE_POWERDOWN + lanai->conf1 = reg_read(lanai, Config1_Reg) & ~CONFIG1_POWERDOWN; + conf1_write(lanai); +#endif + intr_disable(lanai, INT_ALL); + free_irq(lanai->pci->irq, lanai); + reset_board(lanai); +#ifdef USE_POWERDOWN + lanai->conf1 |= CONFIG1_POWERDOWN; + conf1_write(lanai); +#endif + pci_disable_device(lanai->pci); + vcc_table_deallocate(lanai); + service_buffer_deallocate(lanai); + iounmap(lanai->base); + kfree(lanai); +} + +/* close a vcc */ +static void lanai_close(struct atm_vcc *atmvcc) +{ + struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; + struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data; + if (lvcc == NULL) + return; + clear_bit(ATM_VF_READY, &atmvcc->flags); + clear_bit(ATM_VF_PARTIAL, &atmvcc->flags); + if (lvcc->rx.atmvcc == atmvcc) { + lanai_shutdown_rx_vci(lvcc); + if (atmvcc->qos.aal == ATM_AAL0) { + if (--lanai->naal0 <= 0) + aal0_buffer_free(lanai); + } else + lanai_buf_deallocate(&lvcc->rx.buf, lanai->pci); + lvcc->rx.atmvcc = NULL; + } + if (lvcc->tx.atmvcc == atmvcc) { + if (atmvcc == lanai->cbrvcc) { + if (lvcc->vbase != NULL) + lanai_cbr_shutdown(lanai); + lanai->cbrvcc = NULL; + } + lanai_shutdown_tx_vci(lanai, lvcc); + lanai_buf_deallocate(&lvcc->tx.buf, lanai->pci); + lvcc->tx.atmvcc = NULL; + } + if (--lvcc->nref == 0) { + host_vcc_unbind(lanai, lvcc); + kfree(lvcc); + } + atmvcc->dev_data = NULL; + clear_bit(ATM_VF_ADDR, &atmvcc->flags); +} + +/* open a vcc on the card to vpi/vci */ +static int lanai_open(struct atm_vcc *atmvcc) +{ + struct lanai_dev *lanai; + struct lanai_vcc *lvcc; + int result = 0; + int vci = atmvcc->vci; + short vpi = atmvcc->vpi; + /* we don't support partial open - it's not really useful anyway */ + if ((test_bit(ATM_VF_PARTIAL, &atmvcc->flags)) || + (vpi == ATM_VPI_UNSPEC) || (vci == ATM_VCI_UNSPEC)) + return -EINVAL; + lanai = (struct lanai_dev *) atmvcc->dev->dev_data; + result = lanai_normalize_ci(lanai, atmvcc, &vpi, &vci); + if (unlikely(result != 0)) + goto out; + set_bit(ATM_VF_ADDR, &atmvcc->flags); + if (atmvcc->qos.aal != ATM_AAL0 && atmvcc->qos.aal != ATM_AAL5) + return -EINVAL; + DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number, + (int) vpi, vci); + lvcc = lanai->vccs[vci]; + if (lvcc == NULL) { + lvcc = new_lanai_vcc(); + if (unlikely(lvcc == NULL)) + return -ENOMEM; + atmvcc->dev_data = lvcc; + } + lvcc->nref++; + if (atmvcc->qos.rxtp.traffic_class != ATM_NONE) { + APRINTK(lvcc->rx.atmvcc == NULL, "rx.atmvcc!=NULL, vci=%d\n", + vci); + if (atmvcc->qos.aal == ATM_AAL0) { + if (lanai->naal0 == 0) + result = aal0_buffer_allocate(lanai); + } else + result = lanai_setup_rx_vci_aal5( + lanai, lvcc, &atmvcc->qos); + if (unlikely(result != 0)) + goto out_free; + lvcc->rx.atmvcc = atmvcc; + lvcc->stats.rx_nomem = 0; + lvcc->stats.x.aal5.rx_badlen = 0; + lvcc->stats.x.aal5.service_trash = 0; + lvcc->stats.x.aal5.service_stream = 0; + lvcc->stats.x.aal5.service_rxcrc = 0; + if (atmvcc->qos.aal == ATM_AAL0) + lanai->naal0++; + } + if (atmvcc->qos.txtp.traffic_class != ATM_NONE) { + APRINTK(lvcc->tx.atmvcc == NULL, "tx.atmvcc!=NULL, vci=%d\n", + vci); + result = lanai_setup_tx_vci(lanai, lvcc, &atmvcc->qos); + if (unlikely(result != 0)) + goto out_free; + lvcc->tx.atmvcc = atmvcc; + if (atmvcc->qos.txtp.traffic_class == ATM_CBR) { + APRINTK(lanai->cbrvcc == NULL, + "cbrvcc!=NULL, vci=%d\n", vci); + lanai->cbrvcc = atmvcc; + } + } + host_vcc_bind(lanai, lvcc, vci); + /* + * Make sure everything made it to RAM before we tell the card about + * the VCC + */ + wmb(); + if (atmvcc == lvcc->rx.atmvcc) + host_vcc_start_rx(lvcc); + if (atmvcc == lvcc->tx.atmvcc) { + host_vcc_start_tx(lvcc); + if (lanai->cbrvcc == atmvcc) + lanai_cbr_setup(lanai); + } + set_bit(ATM_VF_READY, &atmvcc->flags); + return 0; + out_free: + lanai_close(atmvcc); + out: + return result; +} + +static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb) +{ + struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; + struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data; + unsigned long flags; + if (unlikely(lvcc == NULL || lvcc->vbase == NULL || + lvcc->tx.atmvcc != atmvcc)) + goto einval; +#ifdef DEBUG + if (unlikely(skb == NULL)) { + DPRINTK("lanai_send: skb==NULL for vci=%d\n", atmvcc->vci); + goto einval; + } + if (unlikely(lanai == NULL)) { + DPRINTK("lanai_send: lanai==NULL for vci=%d\n", atmvcc->vci); + goto einval; + } +#endif + ATM_SKB(skb)->vcc = atmvcc; + switch (atmvcc->qos.aal) { + case ATM_AAL5: + read_lock_irqsave(&vcc_sklist_lock, flags); + vcc_tx_aal5(lanai, lvcc, skb); + read_unlock_irqrestore(&vcc_sklist_lock, flags); + return 0; + case ATM_AAL0: + if (unlikely(skb->len != ATM_CELL_SIZE-1)) + goto einval; + /* NOTE - this next line is technically invalid - we haven't unshared skb */ + cpu_to_be32s((u32 *) skb->data); + read_lock_irqsave(&vcc_sklist_lock, flags); + vcc_tx_aal0(lanai, lvcc, skb); + read_unlock_irqrestore(&vcc_sklist_lock, flags); + return 0; + } + DPRINTK("lanai_send: bad aal=%d on vci=%d\n", (int) atmvcc->qos.aal, + atmvcc->vci); + einval: + lanai_free_skb(atmvcc, skb); + return -EINVAL; +} + +static int lanai_change_qos(struct atm_vcc *atmvcc, + /*const*/ struct atm_qos *qos, int flags) +{ + return -EBUSY; /* TODO: need to write this */ +} + +#ifndef CONFIG_PROC_FS +#define lanai_proc_read NULL +#else +static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page) +{ + struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; + loff_t left = *pos; + struct lanai_vcc *lvcc; + if (left-- == 0) + return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, " + "serial=%u, magic=0x%08X, num_vci=%d\n", + atmdev->number, lanai->type==lanai2 ? "2" : "HB", + (unsigned int) lanai->serialno, + (unsigned int) lanai->magicno, lanai->num_vci); + if (left-- == 0) + return sprintf(page, "revision: board=%d, pci_if=%d\n", + lanai->board_rev, (int) lanai->pci->revision); + if (left-- == 0) + return sprintf(page, "EEPROM ESI: %pM\n", + &lanai->eeprom[EEPROM_MAC]); + if (left-- == 0) + return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, " + "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0, + (lanai->status & STATUS_LOCD) ? 1 : 0, + (lanai->status & STATUS_LED) ? 1 : 0, + (lanai->status & STATUS_GPIN) ? 1 : 0); + if (left-- == 0) + return sprintf(page, "global buffer sizes: service=%zu, " + "aal0_rx=%zu\n", lanai_buf_size(&lanai->service), + lanai->naal0 ? lanai_buf_size(&lanai->aal0buf) : 0); + if (left-- == 0) { + get_statistics(lanai); + return sprintf(page, "cells in error: overflow=%u, " + "closed_vci=%u, bad_HEC=%u, rx_fifo=%u\n", + lanai->stats.ovfl_trash, lanai->stats.vci_trash, + lanai->stats.hec_err, lanai->stats.atm_ovfl); + } + if (left-- == 0) + return sprintf(page, "PCI errors: parity_detect=%u, " + "master_abort=%u, master_target_abort=%u,\n", + lanai->stats.pcierr_parity_detect, + lanai->stats.pcierr_serr_set, + lanai->stats.pcierr_m_target_abort); + if (left-- == 0) + return sprintf(page, " slave_target_abort=%u, " + "master_parity=%u\n", lanai->stats.pcierr_s_target_abort, + lanai->stats.pcierr_master_parity); + if (left-- == 0) + return sprintf(page, " no_tx=%u, " + "no_rx=%u, bad_rx_aal=%u\n", lanai->stats.service_norx, + lanai->stats.service_notx, + lanai->stats.service_rxnotaal5); + if (left-- == 0) + return sprintf(page, "resets: dma=%u, card=%u\n", + lanai->stats.dma_reenable, lanai->stats.card_reset); + /* At this point, "left" should be the VCI we're looking for */ + read_lock(&vcc_sklist_lock); + for (; ; left++) { + if (left >= NUM_VCI) { + left = 0; + goto out; + } + if ((lvcc = lanai->vccs[left]) != NULL) + break; + (*pos)++; + } + /* Note that we re-use "left" here since we're done with it */ + left = sprintf(page, "VCI %4d: nref=%d, rx_nomem=%u", (vci_t) left, + lvcc->nref, lvcc->stats.rx_nomem); + if (lvcc->rx.atmvcc != NULL) { + left += sprintf(&page[left], ",\n rx_AAL=%d", + lvcc->rx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0); + if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) + left += sprintf(&page[left], ", rx_buf_size=%zu, " + "rx_bad_len=%u,\n rx_service_trash=%u, " + "rx_service_stream=%u, rx_bad_crc=%u", + lanai_buf_size(&lvcc->rx.buf), + lvcc->stats.x.aal5.rx_badlen, + lvcc->stats.x.aal5.service_trash, + lvcc->stats.x.aal5.service_stream, + lvcc->stats.x.aal5.service_rxcrc); + } + if (lvcc->tx.atmvcc != NULL) + left += sprintf(&page[left], ",\n tx_AAL=%d, " + "tx_buf_size=%zu, tx_qos=%cBR, tx_backlogged=%c", + lvcc->tx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0, + lanai_buf_size(&lvcc->tx.buf), + lvcc->tx.atmvcc == lanai->cbrvcc ? 'C' : 'U', + vcc_is_backlogged(lvcc) ? 'Y' : 'N'); + page[left++] = '\n'; + page[left] = '\0'; + out: + read_unlock(&vcc_sklist_lock); + return left; +} +#endif /* CONFIG_PROC_FS */ + +/* -------------------- HOOKS: */ + +static const struct atmdev_ops ops = { + .dev_close = lanai_dev_close, + .open = lanai_open, + .close = lanai_close, + .send = lanai_send, + .phy_put = NULL, + .phy_get = NULL, + .change_qos = lanai_change_qos, + .proc_read = lanai_proc_read, + .owner = THIS_MODULE +}; + +/* initialize one probed card */ +static int lanai_init_one(struct pci_dev *pci, + const struct pci_device_id *ident) +{ + struct lanai_dev *lanai; + struct atm_dev *atmdev; + int result; + + lanai = kzalloc(sizeof(*lanai), GFP_KERNEL); + if (lanai == NULL) { + printk(KERN_ERR DEV_LABEL + ": couldn't allocate dev_data structure!\n"); + return -ENOMEM; + } + + atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL); + if (atmdev == NULL) { + printk(KERN_ERR DEV_LABEL + ": couldn't register atm device!\n"); + kfree(lanai); + return -EBUSY; + } + + atmdev->dev_data = lanai; + lanai->pci = pci; + lanai->type = (enum lanai_type) ident->device; + + result = lanai_dev_open(atmdev); + if (result != 0) { + DPRINTK("lanai_start() failed, err=%d\n", -result); + atm_dev_deregister(atmdev); + kfree(lanai); + } + return result; +} + +static const struct pci_device_id lanai_pci_tbl[] = { + { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) }, + { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) }, + { 0, } /* terminal entry */ +}; +MODULE_DEVICE_TABLE(pci, lanai_pci_tbl); + +static struct pci_driver lanai_driver = { + .name = DEV_LABEL, + .id_table = lanai_pci_tbl, + .probe = lanai_init_one, +}; + +module_pci_driver(lanai_driver); + +MODULE_AUTHOR("Mitchell Blank Jr <mitch@sfgoth.com>"); +MODULE_DESCRIPTION("Efficient Networks Speedstream 3010 driver"); +MODULE_LICENSE("GPL"); |