summaryrefslogtreecommitdiffstats
path: root/drivers/clk/clk-si570.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/clk/clk-si570.c529
1 files changed, 529 insertions, 0 deletions
diff --git a/drivers/clk/clk-si570.c b/drivers/clk/clk-si570.c
new file mode 100644
index 000000000..0a6d70c49
--- /dev/null
+++ b/drivers/clk/clk-si570.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Silicon Labs Si570/Si571 Programmable XO/VCXO
+ *
+ * Copyright (C) 2010, 2011 Ericsson AB.
+ * Copyright (C) 2011 Guenter Roeck.
+ * Copyright (C) 2011 - 2021 Xilinx Inc.
+ *
+ * Author: Guenter Roeck <guenter.roeck@ericsson.com>
+ * Sören Brinkmann <soren.brinkmann@xilinx.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* Si570 registers */
+#define SI570_REG_HS_N1 7
+#define SI570_REG_N1_RFREQ0 8
+#define SI570_REG_RFREQ1 9
+#define SI570_REG_RFREQ2 10
+#define SI570_REG_RFREQ3 11
+#define SI570_REG_RFREQ4 12
+#define SI570_REG_CONTROL 135
+#define SI570_REG_FREEZE_DCO 137
+#define SI570_DIV_OFFSET_7PPM 6
+
+#define HS_DIV_SHIFT 5
+#define HS_DIV_MASK 0xe0
+#define HS_DIV_OFFSET 4
+#define N1_6_2_MASK 0x1f
+#define N1_1_0_MASK 0xc0
+#define RFREQ_37_32_MASK 0x3f
+
+#define SI570_MIN_FREQ 10000000L
+#define SI570_MAX_FREQ 1417500000L
+#define SI598_MAX_FREQ 525000000L
+
+#define FDCO_MIN 4850000000LL
+#define FDCO_MAX 5670000000LL
+
+#define SI570_CNTRL_RECALL (1 << 0)
+#define SI570_CNTRL_FREEZE_M (1 << 5)
+#define SI570_CNTRL_NEWFREQ (1 << 6)
+
+#define SI570_FREEZE_DCO (1 << 4)
+
+/**
+ * struct clk_si570:
+ * @hw: Clock hw struct
+ * @regmap: Device's regmap
+ * @div_offset: Rgister offset for dividers
+ * @max_freq: Maximum frequency for this device
+ * @fxtal: Factory xtal frequency
+ * @n1: Clock divider N1
+ * @hs_div: Clock divider HSDIV
+ * @rfreq: Clock multiplier RFREQ
+ * @frequency: Current output frequency
+ * @i2c_client: I2C client pointer
+ */
+struct clk_si570 {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ unsigned int div_offset;
+ u64 max_freq;
+ u64 fxtal;
+ unsigned int n1;
+ unsigned int hs_div;
+ u64 rfreq;
+ u64 frequency;
+ struct i2c_client *i2c_client;
+};
+#define to_clk_si570(_hw) container_of(_hw, struct clk_si570, hw)
+
+enum clk_si570_variant {
+ si57x,
+ si59x
+};
+
+/**
+ * si570_get_divs() - Read clock dividers from HW
+ * @data: Pointer to struct clk_si570
+ * @rfreq: Fractional multiplier (output)
+ * @n1: Divider N1 (output)
+ * @hs_div: Divider HSDIV (output)
+ * Returns 0 on success, negative errno otherwise.
+ *
+ * Retrieve clock dividers and multipliers from the HW.
+ */
+static int si570_get_divs(struct clk_si570 *data, u64 *rfreq,
+ unsigned int *n1, unsigned int *hs_div)
+{
+ int err;
+ u8 reg[6];
+ u64 tmp;
+
+ err = regmap_bulk_read(data->regmap, SI570_REG_HS_N1 + data->div_offset,
+ reg, ARRAY_SIZE(reg));
+ if (err)
+ return err;
+
+ *hs_div = ((reg[0] & HS_DIV_MASK) >> HS_DIV_SHIFT) + HS_DIV_OFFSET;
+ *n1 = ((reg[0] & N1_6_2_MASK) << 2) + ((reg[1] & N1_1_0_MASK) >> 6) + 1;
+ /* Handle invalid cases */
+ if (*n1 > 1)
+ *n1 &= ~1;
+
+ tmp = reg[1] & RFREQ_37_32_MASK;
+ tmp = (tmp << 8) + reg[2];
+ tmp = (tmp << 8) + reg[3];
+ tmp = (tmp << 8) + reg[4];
+ tmp = (tmp << 8) + reg[5];
+ *rfreq = tmp;
+
+ return 0;
+}
+
+/**
+ * si570_get_defaults() - Get default values
+ * @data: Driver data structure
+ * @fout: Factory frequency output
+ * @skip_recall: If true, don't recall NVM into RAM
+ * Returns 0 on success, negative errno otherwise.
+ */
+static int si570_get_defaults(struct clk_si570 *data, u64 fout,
+ bool skip_recall)
+{
+ int err;
+ u64 fdco;
+
+ if (!skip_recall)
+ regmap_write(data->regmap, SI570_REG_CONTROL,
+ SI570_CNTRL_RECALL);
+
+ err = si570_get_divs(data, &data->rfreq, &data->n1, &data->hs_div);
+ if (err)
+ return err;
+
+ /*
+ * Accept optional precision loss to avoid arithmetic overflows.
+ * Acceptable per Silicon Labs Application Note AN334.
+ */
+ fdco = fout * data->n1 * data->hs_div;
+ if (fdco >= (1LL << 36))
+ data->fxtal = div64_u64(fdco << 24, data->rfreq >> 4);
+ else
+ data->fxtal = div64_u64(fdco << 28, data->rfreq);
+
+ data->frequency = fout;
+
+ return 0;
+}
+
+/**
+ * si570_update_rfreq() - Update clock multiplier
+ * @data: Driver data structure
+ * Passes on regmap_bulk_write() return value.
+ */
+static int si570_update_rfreq(struct clk_si570 *data)
+{
+ u8 reg[5];
+
+ reg[0] = ((data->n1 - 1) << 6) |
+ ((data->rfreq >> 32) & RFREQ_37_32_MASK);
+ reg[1] = (data->rfreq >> 24) & 0xff;
+ reg[2] = (data->rfreq >> 16) & 0xff;
+ reg[3] = (data->rfreq >> 8) & 0xff;
+ reg[4] = data->rfreq & 0xff;
+
+ return regmap_bulk_write(data->regmap, SI570_REG_N1_RFREQ0 +
+ data->div_offset, reg, ARRAY_SIZE(reg));
+}
+
+/**
+ * si570_calc_divs() - Caluclate clock dividers
+ * @frequency: Target frequency
+ * @data: Driver data structure
+ * @out_rfreq: RFREG fractional multiplier (output)
+ * @out_n1: Clock divider N1 (output)
+ * @out_hs_div: Clock divider HSDIV (output)
+ * Returns 0 on success, negative errno otherwise.
+ *
+ * Calculate the clock dividers (@out_hs_div, @out_n1) and clock multiplier
+ * (@out_rfreq) for a given target @frequency.
+ */
+static int si570_calc_divs(unsigned long frequency, struct clk_si570 *data,
+ u64 *out_rfreq, unsigned int *out_n1, unsigned int *out_hs_div)
+{
+ int i;
+ unsigned int n1, hs_div;
+ u64 fdco, best_fdco = ULLONG_MAX;
+ static const uint8_t si570_hs_div_values[] = { 11, 9, 7, 6, 5, 4 };
+
+ for (i = 0; i < ARRAY_SIZE(si570_hs_div_values); i++) {
+ hs_div = si570_hs_div_values[i];
+ /* Calculate lowest possible value for n1 */
+ n1 = div_u64(div_u64(FDCO_MIN, hs_div), frequency);
+ if (!n1 || (n1 & 1))
+ n1++;
+ while (n1 <= 128) {
+ fdco = (u64)frequency * (u64)hs_div * (u64)n1;
+ if (fdco > FDCO_MAX)
+ break;
+ if (fdco >= FDCO_MIN && fdco < best_fdco) {
+ *out_n1 = n1;
+ *out_hs_div = hs_div;
+ *out_rfreq = div64_u64(fdco << 28, data->fxtal);
+ best_fdco = fdco;
+ }
+ n1 += (n1 == 1 ? 1 : 2);
+ }
+ }
+
+ if (best_fdco == ULLONG_MAX)
+ return -EINVAL;
+
+ return 0;
+}
+
+static unsigned long si570_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ int err;
+ u64 rfreq, rate;
+ unsigned int n1, hs_div;
+ struct clk_si570 *data = to_clk_si570(hw);
+
+ err = si570_get_divs(data, &rfreq, &n1, &hs_div);
+ if (err) {
+ dev_err(&data->i2c_client->dev, "unable to recalc rate\n");
+ return data->frequency;
+ }
+
+ rfreq = div_u64(rfreq, hs_div * n1);
+ rate = (data->fxtal * rfreq) >> 28;
+
+ return rate;
+}
+
+static long si570_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ int err;
+ u64 rfreq;
+ unsigned int n1, hs_div;
+ struct clk_si570 *data = to_clk_si570(hw);
+
+ if (!rate)
+ return 0;
+
+ if (div64_u64(abs(rate - data->frequency) * 10000LL,
+ data->frequency) < 35) {
+ rfreq = div64_u64((data->rfreq * rate) +
+ div64_u64(data->frequency, 2), data->frequency);
+ n1 = data->n1;
+ hs_div = data->hs_div;
+
+ } else {
+ err = si570_calc_divs(rate, data, &rfreq, &n1, &hs_div);
+ if (err) {
+ dev_err(&data->i2c_client->dev,
+ "unable to round rate\n");
+ return 0;
+ }
+ }
+
+ return rate;
+}
+
+/**
+ * si570_set_frequency() - Adjust output frequency
+ * @data: Driver data structure
+ * @frequency: Target frequency
+ * Returns 0 on success.
+ *
+ * Update output frequency for big frequency changes (> 3,500 ppm).
+ */
+static int si570_set_frequency(struct clk_si570 *data, unsigned long frequency)
+{
+ int err;
+
+ err = si570_calc_divs(frequency, data, &data->rfreq, &data->n1,
+ &data->hs_div);
+ if (err)
+ return err;
+
+ /*
+ * The DCO reg should be accessed with a read-modify-write operation
+ * per AN334
+ */
+ regmap_write(data->regmap, SI570_REG_FREEZE_DCO, SI570_FREEZE_DCO);
+ regmap_write(data->regmap, SI570_REG_HS_N1 + data->div_offset,
+ ((data->hs_div - HS_DIV_OFFSET) << HS_DIV_SHIFT) |
+ (((data->n1 - 1) >> 2) & N1_6_2_MASK));
+ si570_update_rfreq(data);
+ regmap_write(data->regmap, SI570_REG_FREEZE_DCO, 0);
+ regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_NEWFREQ);
+
+ /* Applying a new frequency can take up to 10ms */
+ usleep_range(10000, 12000);
+
+ return 0;
+}
+
+/**
+ * si570_set_frequency_small() - Adjust output frequency
+ * @data: Driver data structure
+ * @frequency: Target frequency
+ * Returns 0 on success.
+ *
+ * Update output frequency for small frequency changes (< 3,500 ppm).
+ */
+static int si570_set_frequency_small(struct clk_si570 *data,
+ unsigned long frequency)
+{
+ /*
+ * This is a re-implementation of DIV_ROUND_CLOSEST
+ * using the div64_u64 function lieu of letting the compiler
+ * insert EABI calls
+ */
+ data->rfreq = div64_u64((data->rfreq * frequency) +
+ div_u64(data->frequency, 2), data->frequency);
+ regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_FREEZE_M);
+ si570_update_rfreq(data);
+ regmap_write(data->regmap, SI570_REG_CONTROL, 0);
+
+ /* Applying a new frequency (small change) can take up to 100us */
+ usleep_range(100, 200);
+
+ return 0;
+}
+
+static int si570_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_si570 *data = to_clk_si570(hw);
+ struct i2c_client *client = data->i2c_client;
+ int err;
+
+ if (rate < SI570_MIN_FREQ || rate > data->max_freq) {
+ dev_err(&client->dev,
+ "requested frequency %lu Hz is out of range\n", rate);
+ return -EINVAL;
+ }
+
+ if (div64_u64(abs(rate - data->frequency) * 10000LL,
+ data->frequency) < 35)
+ err = si570_set_frequency_small(data, rate);
+ else
+ err = si570_set_frequency(data, rate);
+
+ if (err)
+ return err;
+
+ data->frequency = rate;
+
+ return 0;
+}
+
+static const struct clk_ops si570_clk_ops = {
+ .recalc_rate = si570_recalc_rate,
+ .round_rate = si570_round_rate,
+ .set_rate = si570_set_rate,
+};
+
+static bool si570_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case SI570_REG_CONTROL:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool si570_regmap_is_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case SI570_REG_HS_N1 ... (SI570_REG_RFREQ4 + SI570_DIV_OFFSET_7PPM):
+ case SI570_REG_CONTROL:
+ case SI570_REG_FREEZE_DCO:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config si570_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = 137,
+ .writeable_reg = si570_regmap_is_writeable,
+ .volatile_reg = si570_regmap_is_volatile,
+};
+
+static const struct i2c_device_id si570_id[] = {
+ { "si570", si57x },
+ { "si571", si57x },
+ { "si598", si59x },
+ { "si599", si59x },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, si570_id);
+
+static int si570_probe(struct i2c_client *client)
+{
+ struct clk_si570 *data;
+ struct clk_init_data init;
+ const struct i2c_device_id *id = i2c_match_id(si570_id, client);
+ u32 initial_fout, factory_fout, stability;
+ bool skip_recall;
+ int err;
+ enum clk_si570_variant variant = id->driver_data;
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ init.ops = &si570_clk_ops;
+ init.flags = 0;
+ init.num_parents = 0;
+ data->hw.init = &init;
+ data->i2c_client = client;
+
+ if (variant == si57x) {
+ err = of_property_read_u32(client->dev.of_node,
+ "temperature-stability", &stability);
+ if (err) {
+ dev_err(&client->dev,
+ "'temperature-stability' property missing\n");
+ return err;
+ }
+ /* adjust register offsets for 7ppm devices */
+ if (stability == 7)
+ data->div_offset = SI570_DIV_OFFSET_7PPM;
+
+ data->max_freq = SI570_MAX_FREQ;
+ } else {
+ data->max_freq = SI598_MAX_FREQ;
+ }
+
+ if (of_property_read_string(client->dev.of_node, "clock-output-names",
+ &init.name))
+ init.name = client->dev.of_node->name;
+
+ err = of_property_read_u32(client->dev.of_node, "factory-fout",
+ &factory_fout);
+ if (err) {
+ dev_err(&client->dev, "'factory-fout' property missing\n");
+ return err;
+ }
+
+ skip_recall = of_property_read_bool(client->dev.of_node,
+ "silabs,skip-recall");
+
+ data->regmap = devm_regmap_init_i2c(client, &si570_regmap_config);
+ if (IS_ERR(data->regmap)) {
+ dev_err(&client->dev, "failed to allocate register map\n");
+ return PTR_ERR(data->regmap);
+ }
+
+ i2c_set_clientdata(client, data);
+ err = si570_get_defaults(data, factory_fout, skip_recall);
+ if (err)
+ return err;
+
+ err = devm_clk_hw_register(&client->dev, &data->hw);
+ if (err) {
+ dev_err(&client->dev, "clock registration failed\n");
+ return err;
+ }
+ err = of_clk_add_hw_provider(client->dev.of_node, of_clk_hw_simple_get,
+ &data->hw);
+ if (err) {
+ dev_err(&client->dev, "unable to add clk provider\n");
+ return err;
+ }
+
+ /* Read the requested initial output frequency from device tree */
+ if (!of_property_read_u32(client->dev.of_node, "clock-frequency",
+ &initial_fout)) {
+ err = clk_set_rate(data->hw.clk, initial_fout);
+ if (err) {
+ of_clk_del_provider(client->dev.of_node);
+ return err;
+ }
+ }
+
+ /* Display a message indicating that we've successfully registered */
+ dev_info(&client->dev, "registered, current frequency %llu Hz\n",
+ data->frequency);
+
+ return 0;
+}
+
+static void si570_remove(struct i2c_client *client)
+{
+ of_clk_del_provider(client->dev.of_node);
+}
+
+static const struct of_device_id clk_si570_of_match[] = {
+ { .compatible = "silabs,si570" },
+ { .compatible = "silabs,si571" },
+ { .compatible = "silabs,si598" },
+ { .compatible = "silabs,si599" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, clk_si570_of_match);
+
+static struct i2c_driver si570_driver = {
+ .driver = {
+ .name = "si570",
+ .of_match_table = clk_si570_of_match,
+ },
+ .probe_new = si570_probe,
+ .remove = si570_remove,
+ .id_table = si570_id,
+};
+module_i2c_driver(si570_driver);
+
+MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>");
+MODULE_DESCRIPTION("Si570 driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 21:27:36 +0000