diff options
Diffstat (limited to 'drivers/cpufreq')
103 files changed, 41526 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig new file mode 100644 index 000000000..2a84fc633 --- /dev/null +++ b/drivers/cpufreq/Kconfig @@ -0,0 +1,325 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "CPU Frequency scaling" + +config CPU_FREQ + bool "CPU Frequency scaling" + select SRCU + help + CPU Frequency scaling allows you to change the clock speed of + CPUs on the fly. This is a nice method to save power, because + the lower the CPU clock speed, the less power the CPU consumes. + + Note that this driver doesn't automatically change the CPU + clock speed, you need to either enable a dynamic cpufreq governor + (see below) after boot, or use a userspace tool. + + For details, take a look at + <file:Documentation/admin-guide/pm/cpufreq.rst>. + + If in doubt, say N. + +if CPU_FREQ + +config CPU_FREQ_GOV_ATTR_SET + bool + +config CPU_FREQ_GOV_COMMON + select CPU_FREQ_GOV_ATTR_SET + select IRQ_WORK + bool + +config CPU_FREQ_STAT + bool "CPU frequency transition statistics" + help + Export CPU frequency statistics information through sysfs. + + If in doubt, say N. + +choice + prompt "Default CPUFreq governor" + default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ + default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if ARM64 || ARM + default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if X86_INTEL_PSTATE && SMP + default CPU_FREQ_DEFAULT_GOV_PERFORMANCE + help + This option sets which CPUFreq governor shall be loaded at + startup. If in doubt, use the default setting. + +config CPU_FREQ_DEFAULT_GOV_PERFORMANCE + bool "performance" + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'performance' as default. This sets + the frequency statically to the highest frequency supported by + the CPU. + +config CPU_FREQ_DEFAULT_GOV_POWERSAVE + bool "powersave" + select CPU_FREQ_GOV_POWERSAVE + help + Use the CPUFreq governor 'powersave' as default. This sets + the frequency statically to the lowest frequency supported by + the CPU. + +config CPU_FREQ_DEFAULT_GOV_USERSPACE + bool "userspace" + select CPU_FREQ_GOV_USERSPACE + help + Use the CPUFreq governor 'userspace' as default. This allows + you to set the CPU frequency manually or when a userspace + program shall be able to set the CPU dynamically without having + to enable the userspace governor manually. + +config CPU_FREQ_DEFAULT_GOV_ONDEMAND + bool "ondemand" + depends on !(X86_INTEL_PSTATE && SMP) + select CPU_FREQ_GOV_ONDEMAND + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'ondemand' as default. This allows + you to get a full dynamic frequency capable system by simply + loading your cpufreq low-level hardware driver. + Be aware that not all cpufreq drivers support the ondemand + governor. If unsure have a look at the help section of the + driver. Fallback governor will be the performance governor. + +config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE + bool "conservative" + depends on !(X86_INTEL_PSTATE && SMP) + select CPU_FREQ_GOV_CONSERVATIVE + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'conservative' as default. This allows + you to get a full dynamic frequency capable system by simply + loading your cpufreq low-level hardware driver. + Be aware that not all cpufreq drivers support the conservative + governor. If unsure have a look at the help section of the + driver. Fallback governor will be the performance governor. + +config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL + bool "schedutil" + depends on SMP + select CPU_FREQ_GOV_SCHEDUTIL + select CPU_FREQ_GOV_PERFORMANCE + help + Use the 'schedutil' CPUFreq governor by default. If unsure, + have a look at the help section of that governor. The fallback + governor will be 'performance'. + +endchoice + +config CPU_FREQ_GOV_PERFORMANCE + tristate "'performance' governor" + help + This cpufreq governor sets the frequency statically to the + highest available CPU frequency. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_performance. + + If in doubt, say Y. + +config CPU_FREQ_GOV_POWERSAVE + tristate "'powersave' governor" + help + This cpufreq governor sets the frequency statically to the + lowest available CPU frequency. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_powersave. + + If in doubt, say Y. + +config CPU_FREQ_GOV_USERSPACE + tristate "'userspace' governor for userspace frequency scaling" + help + Enable this cpufreq governor when you either want to set the + CPU frequency manually or when a userspace program shall + be able to set the CPU dynamically, like on LART + <http://www.lartmaker.nl/>. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_userspace. + + If in doubt, say Y. + +config CPU_FREQ_GOV_ONDEMAND + tristate "'ondemand' cpufreq policy governor" + select CPU_FREQ_GOV_COMMON + help + 'ondemand' - This driver adds a dynamic cpufreq policy governor. + The governor does a periodic polling and + changes frequency based on the CPU utilization. + The support for this governor depends on CPU capability to + do fast frequency switching (i.e, very low latency frequency + transitions). + + To compile this driver as a module, choose M here: the + module will be called cpufreq_ondemand. + + For details, take a look at + <file:Documentation/admin-guide/pm/cpufreq.rst>. + + If in doubt, say N. + +config CPU_FREQ_GOV_CONSERVATIVE + tristate "'conservative' cpufreq governor" + depends on CPU_FREQ + select CPU_FREQ_GOV_COMMON + help + 'conservative' - this driver is rather similar to the 'ondemand' + governor both in its source code and its purpose, the difference is + its optimisation for better suitability in a battery powered + environment. The frequency is gracefully increased and decreased + rather than jumping to 100% when speed is required. + + If you have a desktop machine then you should really be considering + the 'ondemand' governor instead, however if you are using a laptop, + PDA or even an AMD64 based computer (due to the unacceptable + step-by-step latency issues between the minimum and maximum frequency + transitions in the CPU) you will probably want to use this governor. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_conservative. + + For details, take a look at + <file:Documentation/admin-guide/pm/cpufreq.rst>. + + If in doubt, say N. + +config CPU_FREQ_GOV_SCHEDUTIL + bool "'schedutil' cpufreq policy governor" + depends on CPU_FREQ && SMP + select CPU_FREQ_GOV_ATTR_SET + select IRQ_WORK + help + This governor makes decisions based on the utilization data provided + by the scheduler. It sets the CPU frequency to be proportional to + the utilization/capacity ratio coming from the scheduler. If the + utilization is frequency-invariant, the new frequency is also + proportional to the maximum available frequency. If that is not the + case, it is proportional to the current frequency of the CPU. The + frequency tipping point is at utilization/capacity equal to 80% in + both cases. + + If in doubt, say N. + +comment "CPU frequency scaling drivers" + +config CPUFREQ_DT + tristate "Generic DT based cpufreq driver" + depends on HAVE_CLK && OF + select CPUFREQ_DT_PLATDEV + select PM_OPP + help + This adds a generic DT based cpufreq driver for frequency management. + It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) + systems. + + If in doubt, say N. + +config CPUFREQ_DT_PLATDEV + bool + help + This adds a generic DT based cpufreq platdev driver for frequency + management. This creates a 'cpufreq-dt' platform device, on the + supported platforms. + + If in doubt, say N. + +if X86 +source "drivers/cpufreq/Kconfig.x86" +endif + +if ARM || ARM64 +source "drivers/cpufreq/Kconfig.arm" +endif + +if PPC32 || PPC64 +source "drivers/cpufreq/Kconfig.powerpc" +endif + +if IA64 +config IA64_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + + If in doubt, say N. +endif + +if MIPS +config BMIPS_CPUFREQ + tristate "BMIPS CPUfreq Driver" + help + This option adds a CPUfreq driver for BMIPS processors with + support for configurable CPU frequency. + + For now, BMIPS5 chips are supported (such as the Broadcom 7425). + + If in doubt, say N. + +config LOONGSON2_CPUFREQ + tristate "Loongson2 CPUFreq Driver" + depends on LEMOTE_MACH2F + help + This option adds a CPUFreq driver for loongson processors which + support software configurable cpu frequency. + + Loongson2F and its successors support this feature. + + If in doubt, say N. + +config LOONGSON1_CPUFREQ + tristate "Loongson1 CPUFreq Driver" + depends on LOONGSON1_LS1B + help + This option adds a CPUFreq driver for loongson1 processors which + support software configurable cpu frequency. + + If in doubt, say N. +endif + +if SPARC64 +config SPARC_US3_CPUFREQ + tristate "UltraSPARC-III CPU Frequency driver" + help + This adds the CPUFreq driver for UltraSPARC-III processors. + + If in doubt, say N. + +config SPARC_US2E_CPUFREQ + tristate "UltraSPARC-IIe CPU Frequency driver" + help + This adds the CPUFreq driver for UltraSPARC-IIe processors. + + If in doubt, say N. +endif + +if SUPERH +config SH_CPU_FREQ + tristate "SuperH CPU Frequency driver" + help + This adds the cpufreq driver for SuperH. Any CPU that supports + clock rate rounding through the clock framework can use this + driver. While it will make the kernel slightly larger, this is + harmless for CPUs that don't support rate rounding. The driver + will also generate a notice in the boot log before disabling + itself if the CPU in question is not capable of rate rounding. + + If unsure, say N. +endif + +config QORIQ_CPUFREQ + tristate "CPU frequency scaling driver for Freescale QorIQ SoCs" + depends on OF && COMMON_CLK + depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST + select CLK_QORIQ + help + This adds the CPUFreq driver support for Freescale QorIQ SoCs + which are capable of changing the CPU's frequency dynamically. + +endif +endmenu diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm new file mode 100644 index 000000000..82e5de1f6 --- /dev/null +++ b/drivers/cpufreq/Kconfig.arm @@ -0,0 +1,359 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# ARM CPU Frequency scaling drivers +# + +config ACPI_CPPC_CPUFREQ + tristate "CPUFreq driver based on the ACPI CPPC spec" + depends on ACPI_PROCESSOR + select ACPI_CPPC_LIB + help + This adds a CPUFreq driver which uses CPPC methods + as described in the ACPIv5.1 spec. CPPC stands for + Collaborative Processor Performance Controls. It + is based on an abstract continuous scale of CPU + performance values which allows the remote power + processor to flexibly optimize for power and + performance. CPPC relies on power management firmware + support for its operation. + + If in doubt, say N. + +config ACPI_CPPC_CPUFREQ_FIE + bool "Frequency Invariance support for CPPC cpufreq driver" + depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY + default y + help + This extends frequency invariance support in the CPPC cpufreq driver, + by using CPPC delivered and reference performance counters. + + If in doubt, say N. + +config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM + tristate "Allwinner nvmem based SUN50I CPUFreq driver" + depends on ARCH_SUNXI + depends on NVMEM_SUNXI_SID + select PM_OPP + help + This adds the nvmem based CPUFreq driver for Allwinner + h6 SoC. + + To compile this driver as a module, choose M here: the + module will be called sun50i-cpufreq-nvmem. + +config ARM_ARMADA_37XX_CPUFREQ + tristate "Armada 37xx CPUFreq support" + depends on ARCH_MVEBU && CPUFREQ_DT + help + This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. + The Armada 37xx PMU supports 4 frequency and VDD levels. + +config ARM_ARMADA_8K_CPUFREQ + tristate "Armada 8K CPUFreq driver" + depends on ARCH_MVEBU && CPUFREQ_DT + select ARMADA_AP_CPU_CLK + help + This enables the CPUFreq driver support for Marvell + Armada8k SOCs. + Armada8K device has the AP806 which supports scaling + to any full integer divider. + + If in doubt, say N. + +config ARM_SCPI_CPUFREQ + tristate "SCPI based CPUfreq driver" + depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI + help + This adds the CPUfreq driver support for ARM platforms using SCPI + protocol for CPU power management. + + This driver uses SCPI Message Protocol driver to interact with the + firmware providing the CPU DVFS functionality. + +config ARM_VEXPRESS_SPC_CPUFREQ + tristate "Versatile Express SPC based CPUfreq driver" + depends on ARM_CPU_TOPOLOGY && HAVE_CLK + depends on ARCH_VEXPRESS_SPC + select PM_OPP + help + This add the CPUfreq driver support for Versatile Express + big.LITTLE platforms using SPC for power management. + +config ARM_BRCMSTB_AVS_CPUFREQ + tristate "Broadcom STB AVS CPUfreq driver" + depends on ARCH_BRCMSTB || COMPILE_TEST + default y + help + Some Broadcom STB SoCs use a co-processor running proprietary firmware + ("AVS") to handle voltage and frequency scaling. This driver provides + a standard CPUfreq interface to to the firmware. + + Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS. + +config ARM_HIGHBANK_CPUFREQ + tristate "Calxeda Highbank-based" + depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR + default m + help + This adds the CPUFreq driver for Calxeda Highbank SoC + based boards. + + If in doubt, say N. + +config ARM_IMX6Q_CPUFREQ + tristate "Freescale i.MX6 cpufreq support" + depends on ARCH_MXC + depends on REGULATOR_ANATOP + depends on NVMEM_IMX_OCOTP || COMPILE_TEST + select PM_OPP + help + This adds cpufreq driver support for Freescale i.MX6 series SoCs. + + If in doubt, say N. + +config ARM_IMX_CPUFREQ_DT + tristate "Freescale i.MX8M cpufreq support" + depends on ARCH_MXC && CPUFREQ_DT + help + This adds cpufreq driver support for Freescale i.MX8M series SoCs, + based on cpufreq-dt. + + If in doubt, say N. + +config ARM_KIRKWOOD_CPUFREQ + def_bool MACH_KIRKWOOD + help + This adds the CPUFreq driver for Marvell Kirkwood + SoCs. + +config ARM_MEDIATEK_CPUFREQ + tristate "CPU Frequency scaling support for MediaTek SoCs" + depends on ARCH_MEDIATEK && REGULATOR + select PM_OPP + help + This adds the CPUFreq driver support for MediaTek SoCs. + +config ARM_MEDIATEK_CPUFREQ_HW + tristate "MediaTek CPUFreq HW driver" + depends on ARCH_MEDIATEK || COMPILE_TEST + default m + help + Support for the CPUFreq HW driver. + Some MediaTek chipsets have a HW engine to offload the steps + necessary for changing the frequency of the CPUs. Firmware loaded + in this engine exposes a programming interface to the OS. + The driver implements the cpufreq interface for this HW engine. + Say Y if you want to support CPUFreq HW. + +config ARM_OMAP2PLUS_CPUFREQ + bool "TI OMAP2+" + depends on ARCH_OMAP2PLUS + default ARCH_OMAP2PLUS + +config ARM_QCOM_CPUFREQ_NVMEM + tristate "Qualcomm nvmem based CPUFreq" + depends on ARCH_QCOM + depends on NVMEM_QCOM_QFPROM + depends on QCOM_SMEM + select PM_OPP + help + This adds the CPUFreq driver for Qualcomm Kryo SoC based boards. + + If in doubt, say N. + +config ARM_QCOM_CPUFREQ_HW + tristate "QCOM CPUFreq HW driver" + depends on ARCH_QCOM || COMPILE_TEST + help + Support for the CPUFreq HW driver. + Some QCOM chipsets have a HW engine to offload the steps + necessary for changing the frequency of the CPUs. Firmware loaded + in this engine exposes a programming interface to the OS. + The driver implements the cpufreq interface for this HW engine. + Say Y if you want to support CPUFreq HW. + +config ARM_RASPBERRYPI_CPUFREQ + tristate "Raspberry Pi cpufreq support" + depends on CLK_RASPBERRYPI || COMPILE_TEST + help + This adds the CPUFreq driver for Raspberry Pi + + If in doubt, say N. + +config ARM_S3C_CPUFREQ + bool + help + Internal configuration node for common cpufreq on Samsung SoC + +config ARM_S3C24XX_CPUFREQ + bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" + depends on ARCH_S3C24XX + select ARM_S3C_CPUFREQ + help + This enables the CPUfreq driver for the Samsung S3C24XX family + of CPUs. + + For details, take a look at <file:Documentation/cpu-freq>. + + If in doubt, say N. + +config ARM_S3C24XX_CPUFREQ_DEBUG + bool "Debug CPUfreq Samsung driver core" + depends on ARM_S3C24XX_CPUFREQ + help + Enable s3c_freq_dbg for the Samsung S3C CPUfreq core + +config ARM_S3C24XX_CPUFREQ_IODEBUG + bool "Debug CPUfreq Samsung driver IO timing" + depends on ARM_S3C24XX_CPUFREQ + help + Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core + +config ARM_S3C24XX_CPUFREQ_DEBUGFS + bool "Export debugfs for CPUFreq" + depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS + help + Export status information via debugfs. + +config ARM_S3C2410_CPUFREQ + bool + depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 + help + CPU Frequency scaling support for S3C2410 + +config ARM_S3C2412_CPUFREQ + bool + depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 + default y + select S3C2412_IOTIMING + help + CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. + +config ARM_S3C2416_CPUFREQ + bool "S3C2416 CPU Frequency scaling support" + depends on CPU_S3C2416 + help + This adds the CPUFreq driver for the Samsung S3C2416 and + S3C2450 SoC. The S3C2416 supports changing the rate of the + armdiv clock source and also entering a so called dynamic + voltage scaling mode in which it is possible to reduce the + core voltage of the CPU. + + If in doubt, say N. + +config ARM_S3C2416_CPUFREQ_VCORESCALE + bool "Allow voltage scaling for S3C2416 arm core" + depends on ARM_S3C2416_CPUFREQ && REGULATOR + help + Enable CPU voltage scaling when entering the dvs mode. + It uses information gathered through existing hardware and + tests but not documented in any datasheet. + + If in doubt, say N. + +config ARM_S3C2440_CPUFREQ + bool "S3C2440/S3C2442 CPU Frequency scaling support" + depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) + default y + help + CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + +config ARM_S3C64XX_CPUFREQ + bool "Samsung S3C64XX" + depends on CPU_S3C6410 + default y + help + This adds the CPUFreq driver for Samsung S3C6410 SoC. + + If in doubt, say N. + +config ARM_S5PV210_CPUFREQ + bool "Samsung S5PV210 and S5PC110" + depends on CPU_S5PV210 + default y + help + This adds the CPUFreq driver for Samsung S5PV210 and + S5PC110 SoCs. + + If in doubt, say N. + +config ARM_SA1100_CPUFREQ + bool + +config ARM_SA1110_CPUFREQ + bool + +config ARM_SCMI_CPUFREQ + tristate "SCMI based CPUfreq driver" + depends on ARM_SCMI_PROTOCOL || COMPILE_TEST + select PM_OPP + help + This adds the CPUfreq driver support for ARM platforms using SCMI + protocol for CPU power management. + + This driver uses SCMI Message Protocol driver to interact with the + firmware providing the CPU DVFS functionality. + +config ARM_SPEAR_CPUFREQ + bool "SPEAr CPUFreq support" + depends on PLAT_SPEAR + default y + help + This adds the CPUFreq driver support for SPEAr SOCs. + +config ARM_STI_CPUFREQ + tristate "STi CPUFreq support" + depends on CPUFREQ_DT && SOC_STIH407 + help + This driver uses the generic OPP framework to match the running + platform with a predefined set of suitable values. If not provided + we will fall-back so safe-values contained in Device Tree. Enable + this config option if you wish to add CPUFreq support for STi based + SoCs. + +config ARM_TEGRA20_CPUFREQ + tristate "Tegra20/30 CPUFreq support" + depends on ARCH_TEGRA && CPUFREQ_DT + default y + help + This adds the CPUFreq driver support for Tegra20/30 SOCs. + +config ARM_TEGRA124_CPUFREQ + bool "Tegra124 CPUFreq support" + depends on ARCH_TEGRA && CPUFREQ_DT + default y + help + This adds the CPUFreq driver support for Tegra124 SOCs. + +config ARM_TEGRA186_CPUFREQ + tristate "Tegra186 CPUFreq support" + depends on ARCH_TEGRA && TEGRA_BPMP + help + This adds the CPUFreq driver support for Tegra186 SOCs. + +config ARM_TEGRA194_CPUFREQ + tristate "Tegra194 CPUFreq support" + depends on ARCH_TEGRA_194_SOC && TEGRA_BPMP + default y + help + This adds CPU frequency driver support for Tegra194 SOCs. + +config ARM_TI_CPUFREQ + bool "Texas Instruments CPUFreq support" + depends on ARCH_OMAP2PLUS + default ARCH_OMAP2PLUS + help + This driver enables valid OPPs on the running platform based on + values contained within the SoC in use. Enable this in order to + use the cpufreq-dt driver on all Texas Instruments platforms that + provide dt based operating-points-v2 tables with opp-supported-hw + data provided. Required for cpufreq support on AM335x, AM437x, + DRA7x, and AM57x platforms. + +config ARM_PXA2xx_CPUFREQ + tristate "Intel PXA2xx CPUfreq driver" + depends on PXA27x || PXA25x + help + This add the CPUFreq driver support for Intel PXA2xx SOCs. + + If in doubt, say N. diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc new file mode 100644 index 000000000..58151ca56 --- /dev/null +++ b/drivers/cpufreq/Kconfig.powerpc @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only +config CPU_FREQ_CBE + tristate "CBE frequency scaling" + depends on CBE_RAS && PPC_CELL + default m + help + This adds the cpufreq driver for Cell BE processors. + For details, take a look at <file:Documentation/cpu-freq/>. + If you don't have such processor, say N + +config CPU_FREQ_CBE_PMI + bool "CBE frequency scaling using PMI interface" + depends on CPU_FREQ_CBE + default n + help + Select this, if you want to use the PMI interface to switch + frequencies. Using PMI, the processor will not only be able to run at + lower speed, but also at lower core voltage. + +config CPU_FREQ_MAPLE + bool "Support for Maple 970FX Evaluation Board" + depends on PPC_MAPLE + help + This adds support for frequency switching on Maple 970FX + Evaluation Board and compatible boards (IBM JS2x blades). + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on ADB_PMU && PPC32 + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on PPC_PMAC && PPC64 + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC_PASEMI_CPUFREQ + bool "Support for PA Semi PWRficient" + depends on PPC_PASEMI + default y + help + This adds the support for frequency switching on PA Semi + PWRficient processors. + +config POWERNV_CPUFREQ + tristate "CPU frequency scaling for IBM POWERNV platform" + depends on PPC_POWERNV + default y + help + This adds support for CPU frequency switching on IBM POWERNV + platform diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 new file mode 100644 index 000000000..00476e94d --- /dev/null +++ b/drivers/cpufreq/Kconfig.x86 @@ -0,0 +1,324 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# x86 CPU Frequency scaling drivers +# + +config X86_INTEL_PSTATE + bool "Intel P state control" + depends on X86 + select ACPI_PROCESSOR if ACPI + select ACPI_CPPC_LIB if X86_64 && ACPI && SCHED_MC_PRIO + select CPU_FREQ_GOV_PERFORMANCE + select CPU_FREQ_GOV_SCHEDUTIL if SMP + help + This driver provides a P state for Intel core processors. + The driver implements an internal governor and will become + the scaling driver and governor for Sandy bridge processors. + + When this driver is enabled it will become the preferred + scaling driver for Sandy bridge processors. + + If in doubt, say N. + +config X86_PCC_CPUFREQ + tristate "Processor Clocking Control interface driver" + depends on ACPI && ACPI_PROCESSOR + help + This driver adds support for the PCC interface. + + For details, take a look at: + <file:Documentation/admin-guide/pm/cpufreq_drivers.rst>. + + To compile this driver as a module, choose M here: the + module will be called pcc-cpufreq. + + If in doubt, say N. + +config X86_AMD_PSTATE + bool "AMD Processor P-State driver" + depends on X86 && ACPI + select ACPI_PROCESSOR + select ACPI_CPPC_LIB if X86_64 + select CPU_FREQ_GOV_SCHEDUTIL if SMP + help + This driver adds a CPUFreq driver which utilizes a fine grain + processor performance frequency control range instead of legacy + performance levels. _CPC needs to be present in the ACPI tables + of the system. + + For details, take a look at: + <file:Documentation/admin-guide/pm/amd-pstate.rst>. + + If in doubt, say N. + +config X86_AMD_PSTATE_UT + tristate "selftest for AMD Processor P-State driver" + depends on X86 && ACPI_PROCESSOR + default n + help + This kernel module is used for testing. It's safe to say M here. + + It can also be built-in without X86_AMD_PSTATE enabled. + Currently, only tests for amd-pstate are supported. If X86_AMD_PSTATE + is set disabled, it can tell the users test can only run on amd-pstate + driver, please set X86_AMD_PSTATE enabled. + In the future, comparison tests will be added. It can set amd-pstate + disabled and set acpi-cpufreq enabled to run test cases, then compare + the test results. + +config X86_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + This driver also supports Intel Enhanced Speedstep and newer + AMD CPUs. + + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_ACPI_CPUFREQ_CPB + default y + bool "Legacy cpb sysfs knob support for AMD CPUs" + depends on X86_ACPI_CPUFREQ && CPU_SUP_AMD + help + The powernow-k8 driver used to provide a sysfs knob called "cpb" + to disable the Core Performance Boosting feature of AMD CPUs. This + file has now been superseded by the more generic "boost" entry. + + By enabling this option the acpi_cpufreq driver provides the old + entry in addition to the new boost ones, for compatibility reasons. + +config ELAN_CPUFREQ + tristate "AMD Elan SC400 and SC410" + depends on MELAN + help + This adds the CPUFreq driver for AMD Elan SC400 and SC410 + processors. + + You need to specify the processor maximum speed as boot + parameter: elanfreq=maxspeed (in kHz) or as module + parameter "max_freq". + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config SC520_CPUFREQ + tristate "AMD Elan SC520" + depends on MELAN + help + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + + +config X86_POWERNOW_K6 + tristate "AMD Mobile K6-2/K6-3 PowerNow!" + depends on X86_32 + help + This adds the CPUFreq driver for mobile AMD K6-2+ and mobile + AMD K6-3+ processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7 + tristate "AMD Mobile Athlon/Duron PowerNow!" + depends on X86_32 + help + This adds the CPUFreq driver for mobile AMD K7 mobile processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7_ACPI + bool + depends on X86_POWERNOW_K7 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + depends on X86_32 + default y + +config X86_POWERNOW_K8 + tristate "AMD Opteron/Athlon64 PowerNow!" + depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ + help + This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. + Support for K10 and newer processors is now in acpi-cpufreq. + + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + + For details, take a look at <file:Documentation/cpu-freq/>. + +config X86_AMD_FREQ_SENSITIVITY + tristate "AMD frequency sensitivity feedback powersave bias" + depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD + help + This adds AMD-specific powersave bias function to the ondemand + governor, which allows it to make more power-conscious frequency + change decisions based on feedback from hardware (available on AMD + Family 16h and above). + + Hardware feedback tells software how "sensitive" to frequency changes + the CPUs' workloads are. CPU-bound workloads will be more sensitive + -- they will perform better as frequency increases. Memory/IO-bound + workloads will be less sensitive -- they will not necessarily perform + better as frequency increases. + + If in doubt, say N. + +config X86_GX_SUSPMOD + tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" + depends on X86_32 && PCI + help + This add the CPUFreq driver for NatSemi Geode processors which + support suspend modulation. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO + tristate "Intel Enhanced SpeedStep (deprecated)" + select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 + depends on X86_32 || (X86_64 && ACPI_PROCESSOR) + help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. + This adds the CPUFreq driver for Enhanced SpeedStep enabled + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO_TABLE + bool "Built-in tables for Banias CPUs" + depends on X86_32 && X86_SPEEDSTEP_CENTRINO + default y + help + Use built-in tables for Banias CPUs if ACPI encoding + is not available. + + If in doubt, say N. + +config X86_SPEEDSTEP_ICH + tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" + depends on X86_32 + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all + mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, + ICH3 or ICH4 southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_SMI + tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" + depends on X86_32 + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) + on systems which have an Intel 440BX/ZX/MX southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_P4_CLOCKMOD + tristate "Intel Pentium 4 clock modulation" + help + This adds the CPUFreq driver for Intel Pentium 4 / XEON + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. + + For details, take a look at <file:Documentation/cpu-freq/>. + + Unless you are absolutely sure say N. + +config X86_CPUFREQ_NFORCE2 + tristate "nVidia nForce2 FSB changing" + depends on X86_32 + help + This adds the CPUFreq driver for FSB changing on nVidia nForce2 + platforms. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGRUN + tristate "Transmeta LongRun" + depends on X86_32 + help + This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors + which support LongRun. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGHAUL + tristate "VIA Cyrix III Longhaul" + depends on X86_32 && ACPI_PROCESSOR + help + This adds the CPUFreq driver for VIA Samuel/CyrixIII, + VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T + processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" + depends on X86_32 && ACPI_PROCESSOR + help + This adds the CPUFreq driver for VIA C7 processors. However, this driver + does not have any safeguards to prevent operating the CPU out of spec + and is thus considered dangerous. Please use the regular ACPI cpufreq + driver, enabled by CONFIG_X86_ACPI_CPUFREQ. + + If in doubt, say N. + +comment "shared options" + +config X86_SPEEDSTEP_LIB + tristate + default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) + +config X86_SPEEDSTEP_RELAXED_CAP_CHECK + bool "Relaxed speedstep capability checks" + depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + help + Don't perform all checks for a speedstep capable system which would + normally be done. Some ancient or strange systems, though speedstep + capable, don't always indicate that they are speedstep capable. This + option lets the probing code bypass some of those checks if the + parameter "relaxed_check=1" is passed to the module. + diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile new file mode 100644 index 000000000..49b98c62c --- /dev/null +++ b/drivers/cpufreq/Makefile @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0 +# CPUfreq core +obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o + +# CPUfreq stats +obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o + +# CPUfreq governors +obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o +obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o +obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o +obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o +obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o +obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o +obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o + +obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o +obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o + +# Traces +CFLAGS_amd-pstate-trace.o := -I$(src) +amd_pstate-y := amd-pstate.o amd-pstate-trace.o + +################################################################################## +# x86 drivers. +# Link order matters. K8 is preferred to ACPI because of firmware bugs in early +# K8 systems. This is still the case but acpi-cpufreq errors out so that +# powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers. +# speedstep-* is preferred over p4-clockmod. + +obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o +obj-$(CONFIG_X86_AMD_PSTATE) += amd_pstate.o +obj-$(CONFIG_X86_AMD_PSTATE_UT) += amd-pstate-ut.o +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o +obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o +obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o +obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o +obj-$(CONFIG_X86_LONGHAUL) += longhaul.o +obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o +obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o +obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o +obj-$(CONFIG_X86_LONGRUN) += longrun.o +obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o +obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o +obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o +obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o +obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o +obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o +obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o +obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o +obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o + +################################################################################## +# ARM SoC drivers +obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o +obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ) += armada-8k-cpufreq.o +obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o +obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o +obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o +obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o +obj-$(CONFIG_ARM_IMX_CPUFREQ_DT) += imx-cpufreq-dt.o +obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o +obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o +obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ_HW) += mediatek-cpufreq-hw.o +obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o +obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o +obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o +obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o +obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o +obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o +obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o +obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o +obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o +obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o +obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o +obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o +obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o +obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o +obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o +obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o +obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o +obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o +obj-$(CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM) += sun50i-cpufreq-nvmem.o +obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o +obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o +obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o +obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o +obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o +obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o + + +################################################################################## +# PowerPC platform drivers +obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o +ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o +obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o +obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o +obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o +obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o +obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o + +################################################################################## +# Other platform drivers +obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o +obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o +obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o +obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o +obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o +obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o +obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c new file mode 100644 index 000000000..1bb2b90eb --- /dev/null +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -0,0 +1,1073 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * acpi-cpufreq.c - ACPI Processor P-States Driver + * + * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> + * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> + * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/compiler.h> +#include <linux/dmi.h> +#include <linux/slab.h> + +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/uaccess.h> + +#include <acpi/processor.h> +#include <acpi/cppc_acpi.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpufeature.h> +#include <asm/cpu_device_id.h> + +MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); +MODULE_DESCRIPTION("ACPI Processor P-States Driver"); +MODULE_LICENSE("GPL"); + +enum { + UNDEFINED_CAPABLE = 0, + SYSTEM_INTEL_MSR_CAPABLE, + SYSTEM_AMD_MSR_CAPABLE, + SYSTEM_IO_CAPABLE, +}; + +#define INTEL_MSR_RANGE (0xffff) +#define AMD_MSR_RANGE (0x7) +#define HYGON_MSR_RANGE (0x7) + +#define MSR_K7_HWCR_CPB_DIS (1ULL << 25) + +struct acpi_cpufreq_data { + unsigned int resume; + unsigned int cpu_feature; + unsigned int acpi_perf_cpu; + cpumask_var_t freqdomain_cpus; + void (*cpu_freq_write)(struct acpi_pct_register *reg, u32 val); + u32 (*cpu_freq_read)(struct acpi_pct_register *reg); +}; + +/* acpi_perf_data is a pointer to percpu data. */ +static struct acpi_processor_performance __percpu *acpi_perf_data; + +static inline struct acpi_processor_performance *to_perf_data(struct acpi_cpufreq_data *data) +{ + return per_cpu_ptr(acpi_perf_data, data->acpi_perf_cpu); +} + +static struct cpufreq_driver acpi_cpufreq_driver; + +static unsigned int acpi_pstate_strict; + +static bool boost_state(unsigned int cpu) +{ + u32 lo, hi; + u64 msr; + + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + case X86_VENDOR_CENTAUR: + case X86_VENDOR_ZHAOXIN: + rdmsr_on_cpu(cpu, MSR_IA32_MISC_ENABLE, &lo, &hi); + msr = lo | ((u64)hi << 32); + return !(msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE); + case X86_VENDOR_HYGON: + case X86_VENDOR_AMD: + rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); + msr = lo | ((u64)hi << 32); + return !(msr & MSR_K7_HWCR_CPB_DIS); + } + return false; +} + +static int boost_set_msr(bool enable) +{ + u32 msr_addr; + u64 msr_mask, val; + + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + case X86_VENDOR_CENTAUR: + case X86_VENDOR_ZHAOXIN: + msr_addr = MSR_IA32_MISC_ENABLE; + msr_mask = MSR_IA32_MISC_ENABLE_TURBO_DISABLE; + break; + case X86_VENDOR_HYGON: + case X86_VENDOR_AMD: + msr_addr = MSR_K7_HWCR; + msr_mask = MSR_K7_HWCR_CPB_DIS; + break; + default: + return -EINVAL; + } + + rdmsrl(msr_addr, val); + + if (enable) + val &= ~msr_mask; + else + val |= msr_mask; + + wrmsrl(msr_addr, val); + return 0; +} + +static void boost_set_msr_each(void *p_en) +{ + bool enable = (bool) p_en; + + boost_set_msr(enable); +} + +static int set_boost(struct cpufreq_policy *policy, int val) +{ + on_each_cpu_mask(policy->cpus, boost_set_msr_each, + (void *)(long)val, 1); + pr_debug("CPU %*pbl: Core Boosting %sabled.\n", + cpumask_pr_args(policy->cpus), val ? "en" : "dis"); + + return 0; +} + +static ssize_t show_freqdomain_cpus(struct cpufreq_policy *policy, char *buf) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + + if (unlikely(!data)) + return -ENODEV; + + return cpufreq_show_cpus(data->freqdomain_cpus, buf); +} + +cpufreq_freq_attr_ro(freqdomain_cpus); + +#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB +static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, + size_t count) +{ + int ret; + unsigned int val = 0; + + if (!acpi_cpufreq_driver.set_boost) + return -EINVAL; + + ret = kstrtouint(buf, 10, &val); + if (ret || val > 1) + return -EINVAL; + + cpus_read_lock(); + set_boost(policy, val); + cpus_read_unlock(); + + return count; +} + +static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) +{ + return sprintf(buf, "%u\n", acpi_cpufreq_driver.boost_enabled); +} + +cpufreq_freq_attr_rw(cpb); +#endif + +static int check_est_cpu(unsigned int cpuid) +{ + struct cpuinfo_x86 *cpu = &cpu_data(cpuid); + + return cpu_has(cpu, X86_FEATURE_EST); +} + +static int check_amd_hwpstate_cpu(unsigned int cpuid) +{ + struct cpuinfo_x86 *cpu = &cpu_data(cpuid); + + return cpu_has(cpu, X86_FEATURE_HW_PSTATE); +} + +static unsigned extract_io(struct cpufreq_policy *policy, u32 value) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + struct acpi_processor_performance *perf; + int i; + + perf = to_perf_data(data); + + for (i = 0; i < perf->state_count; i++) { + if (value == perf->states[i].status) + return policy->freq_table[i].frequency; + } + return 0; +} + +static unsigned extract_msr(struct cpufreq_policy *policy, u32 msr) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + struct cpufreq_frequency_table *pos; + struct acpi_processor_performance *perf; + + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + msr &= AMD_MSR_RANGE; + else if (boot_cpu_data.x86_vendor == X86_VENDOR_HYGON) + msr &= HYGON_MSR_RANGE; + else + msr &= INTEL_MSR_RANGE; + + perf = to_perf_data(data); + + cpufreq_for_each_entry(pos, policy->freq_table) + if (msr == perf->states[pos->driver_data].status) + return pos->frequency; + return policy->freq_table[0].frequency; +} + +static unsigned extract_freq(struct cpufreq_policy *policy, u32 val) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + + switch (data->cpu_feature) { + case SYSTEM_INTEL_MSR_CAPABLE: + case SYSTEM_AMD_MSR_CAPABLE: + return extract_msr(policy, val); + case SYSTEM_IO_CAPABLE: + return extract_io(policy, val); + default: + return 0; + } +} + +static u32 cpu_freq_read_intel(struct acpi_pct_register *not_used) +{ + u32 val, dummy __always_unused; + + rdmsr(MSR_IA32_PERF_CTL, val, dummy); + return val; +} + +static void cpu_freq_write_intel(struct acpi_pct_register *not_used, u32 val) +{ + u32 lo, hi; + + rdmsr(MSR_IA32_PERF_CTL, lo, hi); + lo = (lo & ~INTEL_MSR_RANGE) | (val & INTEL_MSR_RANGE); + wrmsr(MSR_IA32_PERF_CTL, lo, hi); +} + +static u32 cpu_freq_read_amd(struct acpi_pct_register *not_used) +{ + u32 val, dummy __always_unused; + + rdmsr(MSR_AMD_PERF_CTL, val, dummy); + return val; +} + +static void cpu_freq_write_amd(struct acpi_pct_register *not_used, u32 val) +{ + wrmsr(MSR_AMD_PERF_CTL, val, 0); +} + +static u32 cpu_freq_read_io(struct acpi_pct_register *reg) +{ + u32 val; + + acpi_os_read_port(reg->address, &val, reg->bit_width); + return val; +} + +static void cpu_freq_write_io(struct acpi_pct_register *reg, u32 val) +{ + acpi_os_write_port(reg->address, val, reg->bit_width); +} + +struct drv_cmd { + struct acpi_pct_register *reg; + u32 val; + union { + void (*write)(struct acpi_pct_register *reg, u32 val); + u32 (*read)(struct acpi_pct_register *reg); + } func; +}; + +/* Called via smp_call_function_single(), on the target CPU */ +static void do_drv_read(void *_cmd) +{ + struct drv_cmd *cmd = _cmd; + + cmd->val = cmd->func.read(cmd->reg); +} + +static u32 drv_read(struct acpi_cpufreq_data *data, const struct cpumask *mask) +{ + struct acpi_processor_performance *perf = to_perf_data(data); + struct drv_cmd cmd = { + .reg = &perf->control_register, + .func.read = data->cpu_freq_read, + }; + int err; + + err = smp_call_function_any(mask, do_drv_read, &cmd, 1); + WARN_ON_ONCE(err); /* smp_call_function_any() was buggy? */ + return cmd.val; +} + +/* Called via smp_call_function_many(), on the target CPUs */ +static void do_drv_write(void *_cmd) +{ + struct drv_cmd *cmd = _cmd; + + cmd->func.write(cmd->reg, cmd->val); +} + +static void drv_write(struct acpi_cpufreq_data *data, + const struct cpumask *mask, u32 val) +{ + struct acpi_processor_performance *perf = to_perf_data(data); + struct drv_cmd cmd = { + .reg = &perf->control_register, + .val = val, + .func.write = data->cpu_freq_write, + }; + int this_cpu; + + this_cpu = get_cpu(); + if (cpumask_test_cpu(this_cpu, mask)) + do_drv_write(&cmd); + + smp_call_function_many(mask, do_drv_write, &cmd, 1); + put_cpu(); +} + +static u32 get_cur_val(const struct cpumask *mask, struct acpi_cpufreq_data *data) +{ + u32 val; + + if (unlikely(cpumask_empty(mask))) + return 0; + + val = drv_read(data, mask); + + pr_debug("%s = %u\n", __func__, val); + + return val; +} + +static unsigned int get_cur_freq_on_cpu(unsigned int cpu) +{ + struct acpi_cpufreq_data *data; + struct cpufreq_policy *policy; + unsigned int freq; + unsigned int cached_freq; + + pr_debug("%s (%d)\n", __func__, cpu); + + policy = cpufreq_cpu_get_raw(cpu); + if (unlikely(!policy)) + return 0; + + data = policy->driver_data; + if (unlikely(!data || !policy->freq_table)) + return 0; + + cached_freq = policy->freq_table[to_perf_data(data)->state].frequency; + freq = extract_freq(policy, get_cur_val(cpumask_of(cpu), data)); + if (freq != cached_freq) { + /* + * The dreaded BIOS frequency change behind our back. + * Force set the frequency on next target call. + */ + data->resume = 1; + } + + pr_debug("cur freq = %u\n", freq); + + return freq; +} + +static unsigned int check_freqs(struct cpufreq_policy *policy, + const struct cpumask *mask, unsigned int freq) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + unsigned int cur_freq; + unsigned int i; + + for (i = 0; i < 100; i++) { + cur_freq = extract_freq(policy, get_cur_val(mask, data)); + if (cur_freq == freq) + return 1; + udelay(10); + } + return 0; +} + +static int acpi_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + struct acpi_processor_performance *perf; + const struct cpumask *mask; + unsigned int next_perf_state = 0; /* Index into perf table */ + int result = 0; + + if (unlikely(!data)) { + return -ENODEV; + } + + perf = to_perf_data(data); + next_perf_state = policy->freq_table[index].driver_data; + if (perf->state == next_perf_state) { + if (unlikely(data->resume)) { + pr_debug("Called after resume, resetting to P%d\n", + next_perf_state); + data->resume = 0; + } else { + pr_debug("Already at target state (P%d)\n", + next_perf_state); + return 0; + } + } + + /* + * The core won't allow CPUs to go away until the governor has been + * stopped, so we can rely on the stability of policy->cpus. + */ + mask = policy->shared_type == CPUFREQ_SHARED_TYPE_ANY ? + cpumask_of(policy->cpu) : policy->cpus; + + drv_write(data, mask, perf->states[next_perf_state].control); + + if (acpi_pstate_strict) { + if (!check_freqs(policy, mask, + policy->freq_table[index].frequency)) { + pr_debug("%s (%d)\n", __func__, policy->cpu); + result = -EAGAIN; + } + } + + if (!result) + perf->state = next_perf_state; + + return result; +} + +static unsigned int acpi_cpufreq_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + struct acpi_processor_performance *perf; + struct cpufreq_frequency_table *entry; + unsigned int next_perf_state, next_freq, index; + + /* + * Find the closest frequency above target_freq. + */ + if (policy->cached_target_freq == target_freq) + index = policy->cached_resolved_idx; + else + index = cpufreq_table_find_index_dl(policy, target_freq, + false); + + entry = &policy->freq_table[index]; + next_freq = entry->frequency; + next_perf_state = entry->driver_data; + + perf = to_perf_data(data); + if (perf->state == next_perf_state) { + if (unlikely(data->resume)) + data->resume = 0; + else + return next_freq; + } + + data->cpu_freq_write(&perf->control_register, + perf->states[next_perf_state].control); + perf->state = next_perf_state; + return next_freq; +} + +static unsigned long +acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) +{ + struct acpi_processor_performance *perf; + + perf = to_perf_data(data); + if (cpu_khz) { + /* search the closest match to cpu_khz */ + unsigned int i; + unsigned long freq; + unsigned long freqn = perf->states[0].core_frequency * 1000; + + for (i = 0; i < (perf->state_count-1); i++) { + freq = freqn; + freqn = perf->states[i+1].core_frequency * 1000; + if ((2 * cpu_khz) > (freqn + freq)) { + perf->state = i; + return freq; + } + } + perf->state = perf->state_count-1; + return freqn; + } else { + /* assume CPU is at P0... */ + perf->state = 0; + return perf->states[0].core_frequency * 1000; + } +} + +static void free_acpi_perf_data(void) +{ + unsigned int i; + + /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */ + for_each_possible_cpu(i) + free_cpumask_var(per_cpu_ptr(acpi_perf_data, i) + ->shared_cpu_map); + free_percpu(acpi_perf_data); +} + +static int cpufreq_boost_online(unsigned int cpu) +{ + /* + * On the CPU_UP path we simply keep the boost-disable flag + * in sync with the current global state. + */ + return boost_set_msr(acpi_cpufreq_driver.boost_enabled); +} + +static int cpufreq_boost_down_prep(unsigned int cpu) +{ + /* + * Clear the boost-disable bit on the CPU_DOWN path so that + * this cpu cannot block the remaining ones from boosting. + */ + return boost_set_msr(1); +} + +/* + * acpi_cpufreq_early_init - initialize ACPI P-States library + * + * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) + * in order to determine correct frequency and voltage pairings. We can + * do _PDC and _PSD and find out the processor dependency for the + * actual init that will happen later... + */ +static int __init acpi_cpufreq_early_init(void) +{ + unsigned int i; + pr_debug("%s\n", __func__); + + acpi_perf_data = alloc_percpu(struct acpi_processor_performance); + if (!acpi_perf_data) { + pr_debug("Memory allocation error for acpi_perf_data.\n"); + return -ENOMEM; + } + for_each_possible_cpu(i) { + if (!zalloc_cpumask_var_node( + &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, + GFP_KERNEL, cpu_to_node(i))) { + + /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */ + free_acpi_perf_data(); + return -ENOMEM; + } + } + + /* Do initialization in ACPI core */ + acpi_processor_preregister_performance(acpi_perf_data); + return 0; +} + +#ifdef CONFIG_SMP +/* + * Some BIOSes do SW_ANY coordination internally, either set it up in hw + * or do it in BIOS firmware and won't inform about it to OS. If not + * detected, this has a side effect of making CPU run at a different speed + * than OS intended it to run at. Detect it and handle it cleanly. + */ +static int bios_with_sw_any_bug; + +static int sw_any_bug_found(const struct dmi_system_id *d) +{ + bios_with_sw_any_bug = 1; + return 0; +} + +static const struct dmi_system_id sw_any_bug_dmi_table[] = { + { + .callback = sw_any_bug_found, + .ident = "Supermicro Server X6DLP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), + DMI_MATCH(DMI_BIOS_VERSION, "080010"), + DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), + }, + }, + { } +}; + +static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) +{ + /* Intel Xeon Processor 7100 Series Specification Update + * https://www.intel.com/Assets/PDF/specupdate/314554.pdf + * AL30: A Machine Check Exception (MCE) Occurring during an + * Enhanced Intel SpeedStep Technology Ratio Change May Cause + * Both Processor Cores to Lock Up. */ + if (c->x86_vendor == X86_VENDOR_INTEL) { + if ((c->x86 == 15) && + (c->x86_model == 6) && + (c->x86_stepping == 8)) { + pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n"); + return -ENODEV; + } + } + return 0; +} +#endif + +#ifdef CONFIG_ACPI_CPPC_LIB +static u64 get_max_boost_ratio(unsigned int cpu) +{ + struct cppc_perf_caps perf_caps; + u64 highest_perf, nominal_perf; + int ret; + + if (acpi_pstate_strict) + return 0; + + ret = cppc_get_perf_caps(cpu, &perf_caps); + if (ret) { + pr_debug("CPU%d: Unable to get performance capabilities (%d)\n", + cpu, ret); + return 0; + } + + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + highest_perf = amd_get_highest_perf(); + else + highest_perf = perf_caps.highest_perf; + + nominal_perf = perf_caps.nominal_perf; + + if (!highest_perf || !nominal_perf) { + pr_debug("CPU%d: highest or nominal performance missing\n", cpu); + return 0; + } + + if (highest_perf < nominal_perf) { + pr_debug("CPU%d: nominal performance above highest\n", cpu); + return 0; + } + + return div_u64(highest_perf << SCHED_CAPACITY_SHIFT, nominal_perf); +} +#else +static inline u64 get_max_boost_ratio(unsigned int cpu) { return 0; } +#endif + +static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_table; + struct acpi_processor_performance *perf; + struct acpi_cpufreq_data *data; + unsigned int cpu = policy->cpu; + struct cpuinfo_x86 *c = &cpu_data(cpu); + unsigned int valid_states = 0; + unsigned int result = 0; + u64 max_boost_ratio; + unsigned int i; +#ifdef CONFIG_SMP + static int blacklisted; +#endif + + pr_debug("%s\n", __func__); + +#ifdef CONFIG_SMP + if (blacklisted) + return blacklisted; + blacklisted = acpi_cpufreq_blacklist(c); + if (blacklisted) + return blacklisted; +#endif + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (!zalloc_cpumask_var(&data->freqdomain_cpus, GFP_KERNEL)) { + result = -ENOMEM; + goto err_free; + } + + perf = per_cpu_ptr(acpi_perf_data, cpu); + data->acpi_perf_cpu = cpu; + policy->driver_data = data; + + if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) + acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; + + result = acpi_processor_register_performance(perf, cpu); + if (result) + goto err_free_mask; + + policy->shared_type = perf->shared_type; + + /* + * Will let policy->cpus know about dependency only when software + * coordination is required. + */ + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || + policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { + cpumask_copy(policy->cpus, perf->shared_cpu_map); + } + cpumask_copy(data->freqdomain_cpus, perf->shared_cpu_map); + +#ifdef CONFIG_SMP + dmi_check_system(sw_any_bug_dmi_table); + if (bios_with_sw_any_bug && !policy_is_shared(policy)) { + policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; + cpumask_copy(policy->cpus, topology_core_cpumask(cpu)); + } + + if (check_amd_hwpstate_cpu(cpu) && boot_cpu_data.x86 < 0x19 && + !acpi_pstate_strict) { + cpumask_clear(policy->cpus); + cpumask_set_cpu(cpu, policy->cpus); + cpumask_copy(data->freqdomain_cpus, + topology_sibling_cpumask(cpu)); + policy->shared_type = CPUFREQ_SHARED_TYPE_HW; + pr_info_once("overriding BIOS provided _PSD data\n"); + } +#endif + + /* capability check */ + if (perf->state_count <= 1) { + pr_debug("No P-States\n"); + result = -ENODEV; + goto err_unreg; + } + + if (perf->control_register.space_id != perf->status_register.space_id) { + result = -ENODEV; + goto err_unreg; + } + + switch (perf->control_register.space_id) { + case ACPI_ADR_SPACE_SYSTEM_IO: + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 == 0xf) { + pr_debug("AMD K8 systems must use native drivers.\n"); + result = -ENODEV; + goto err_unreg; + } + pr_debug("SYSTEM IO addr space\n"); + data->cpu_feature = SYSTEM_IO_CAPABLE; + data->cpu_freq_read = cpu_freq_read_io; + data->cpu_freq_write = cpu_freq_write_io; + break; + case ACPI_ADR_SPACE_FIXED_HARDWARE: + pr_debug("HARDWARE addr space\n"); + if (check_est_cpu(cpu)) { + data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; + data->cpu_freq_read = cpu_freq_read_intel; + data->cpu_freq_write = cpu_freq_write_intel; + break; + } + if (check_amd_hwpstate_cpu(cpu)) { + data->cpu_feature = SYSTEM_AMD_MSR_CAPABLE; + data->cpu_freq_read = cpu_freq_read_amd; + data->cpu_freq_write = cpu_freq_write_amd; + break; + } + result = -ENODEV; + goto err_unreg; + default: + pr_debug("Unknown addr space %d\n", + (u32) (perf->control_register.space_id)); + result = -ENODEV; + goto err_unreg; + } + + freq_table = kcalloc(perf->state_count + 1, sizeof(*freq_table), + GFP_KERNEL); + if (!freq_table) { + result = -ENOMEM; + goto err_unreg; + } + + /* detect transition latency */ + policy->cpuinfo.transition_latency = 0; + for (i = 0; i < perf->state_count; i++) { + if ((perf->states[i].transition_latency * 1000) > + policy->cpuinfo.transition_latency) + policy->cpuinfo.transition_latency = + perf->states[i].transition_latency * 1000; + } + + /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ + if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && + policy->cpuinfo.transition_latency > 20 * 1000) { + policy->cpuinfo.transition_latency = 20 * 1000; + pr_info_once("P-state transition latency capped at 20 uS\n"); + } + + /* table init */ + for (i = 0; i < perf->state_count; i++) { + if (i > 0 && perf->states[i].core_frequency >= + freq_table[valid_states-1].frequency / 1000) + continue; + + freq_table[valid_states].driver_data = i; + freq_table[valid_states].frequency = + perf->states[i].core_frequency * 1000; + valid_states++; + } + freq_table[valid_states].frequency = CPUFREQ_TABLE_END; + + max_boost_ratio = get_max_boost_ratio(cpu); + if (max_boost_ratio) { + unsigned int freq = freq_table[0].frequency; + + /* + * Because the loop above sorts the freq_table entries in the + * descending order, freq is the maximum frequency in the table. + * Assume that it corresponds to the CPPC nominal frequency and + * use it to set cpuinfo.max_freq. + */ + policy->cpuinfo.max_freq = freq * max_boost_ratio >> SCHED_CAPACITY_SHIFT; + } else { + /* + * If the maximum "boost" frequency is unknown, ask the arch + * scale-invariance code to use the "nominal" performance for + * CPU utilization scaling so as to prevent the schedutil + * governor from selecting inadequate CPU frequencies. + */ + arch_set_max_freq_ratio(true); + } + + policy->freq_table = freq_table; + perf->state = 0; + + switch (perf->control_register.space_id) { + case ACPI_ADR_SPACE_SYSTEM_IO: + /* + * The core will not set policy->cur, because + * cpufreq_driver->get is NULL, so we need to set it here. + * However, we have to guess it, because the current speed is + * unknown and not detectable via IO ports. + */ + policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); + break; + case ACPI_ADR_SPACE_FIXED_HARDWARE: + acpi_cpufreq_driver.get = get_cur_freq_on_cpu; + break; + default: + break; + } + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + pr_debug("CPU%u - ACPI performance management activated.\n", cpu); + for (i = 0; i < perf->state_count; i++) + pr_debug(" %cP%d: %d MHz, %d mW, %d uS\n", + (i == perf->state ? '*' : ' '), i, + (u32) perf->states[i].core_frequency, + (u32) perf->states[i].power, + (u32) perf->states[i].transition_latency); + + /* + * the first call to ->target() should result in us actually + * writing something to the appropriate registers. + */ + data->resume = 1; + + policy->fast_switch_possible = !acpi_pstate_strict && + !(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY); + + if (perf->states[0].core_frequency * 1000 != freq_table[0].frequency) + pr_warn(FW_WARN "P-state 0 is not max freq\n"); + + return result; + +err_unreg: + acpi_processor_unregister_performance(cpu); +err_free_mask: + free_cpumask_var(data->freqdomain_cpus); +err_free: + kfree(data); + policy->driver_data = NULL; + + return result; +} + +static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + + pr_debug("%s\n", __func__); + + policy->fast_switch_possible = false; + policy->driver_data = NULL; + acpi_processor_unregister_performance(data->acpi_perf_cpu); + free_cpumask_var(data->freqdomain_cpus); + kfree(policy->freq_table); + kfree(data); + + return 0; +} + +static int acpi_cpufreq_resume(struct cpufreq_policy *policy) +{ + struct acpi_cpufreq_data *data = policy->driver_data; + + pr_debug("%s\n", __func__); + + data->resume = 1; + + return 0; +} + +static struct freq_attr *acpi_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &freqdomain_cpus, +#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB + &cpb, +#endif + NULL, +}; + +static struct cpufreq_driver acpi_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = acpi_cpufreq_target, + .fast_switch = acpi_cpufreq_fast_switch, + .bios_limit = acpi_processor_get_bios_limit, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .resume = acpi_cpufreq_resume, + .name = "acpi-cpufreq", + .attr = acpi_cpufreq_attr, +}; + +static enum cpuhp_state acpi_cpufreq_online; + +static void __init acpi_cpufreq_boost_init(void) +{ + int ret; + + if (!(boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA))) { + pr_debug("Boost capabilities not present in the processor\n"); + return; + } + + acpi_cpufreq_driver.set_boost = set_boost; + acpi_cpufreq_driver.boost_enabled = boost_state(0); + + /* + * This calls the online callback on all online cpu and forces all + * MSRs to the same value. + */ + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "cpufreq/acpi:online", + cpufreq_boost_online, cpufreq_boost_down_prep); + if (ret < 0) { + pr_err("acpi_cpufreq: failed to register hotplug callbacks\n"); + return; + } + acpi_cpufreq_online = ret; +} + +static void acpi_cpufreq_boost_exit(void) +{ + if (acpi_cpufreq_online > 0) + cpuhp_remove_state_nocalls(acpi_cpufreq_online); +} + +static int __init acpi_cpufreq_init(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + /* don't keep reloading if cpufreq_driver exists */ + if (cpufreq_get_current_driver()) + return -EEXIST; + + pr_debug("%s\n", __func__); + + ret = acpi_cpufreq_early_init(); + if (ret) + return ret; + +#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB + /* this is a sysfs file with a strange name and an even stranger + * semantic - per CPU instantiation, but system global effect. + * Lets enable it only on AMD CPUs for compatibility reasons and + * only if configured. This is considered legacy code, which + * will probably be removed at some point in the future. + */ + if (!check_amd_hwpstate_cpu(0)) { + struct freq_attr **attr; + + pr_debug("CPB unsupported, do not expose it\n"); + + for (attr = acpi_cpufreq_attr; *attr; attr++) + if (*attr == &cpb) { + *attr = NULL; + break; + } + } +#endif + acpi_cpufreq_boost_init(); + + ret = cpufreq_register_driver(&acpi_cpufreq_driver); + if (ret) { + free_acpi_perf_data(); + acpi_cpufreq_boost_exit(); + } + return ret; +} + +static void __exit acpi_cpufreq_exit(void) +{ + pr_debug("%s\n", __func__); + + acpi_cpufreq_boost_exit(); + + cpufreq_unregister_driver(&acpi_cpufreq_driver); + + free_acpi_perf_data(); +} + +module_param(acpi_pstate_strict, uint, 0644); +MODULE_PARM_DESC(acpi_pstate_strict, + "value 0 or non-zero. non-zero -> strict ACPI checks are " + "performed during frequency changes."); + +late_initcall(acpi_cpufreq_init); +module_exit(acpi_cpufreq_exit); + +static const struct x86_cpu_id __maybe_unused acpi_cpufreq_ids[] = { + X86_MATCH_FEATURE(X86_FEATURE_ACPI, NULL), + X86_MATCH_FEATURE(X86_FEATURE_HW_PSTATE, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); + +static const struct acpi_device_id __maybe_unused processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, }, + {ACPI_PROCESSOR_DEVICE_HID, }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, processor_device_ids); + +MODULE_ALIAS("acpi"); diff --git a/drivers/cpufreq/amd-pstate-trace.c b/drivers/cpufreq/amd-pstate-trace.c new file mode 100644 index 000000000..891b696dc --- /dev/null +++ b/drivers/cpufreq/amd-pstate-trace.c @@ -0,0 +1,2 @@ +#define CREATE_TRACE_POINTS +#include "amd-pstate-trace.h" diff --git a/drivers/cpufreq/amd-pstate-trace.h b/drivers/cpufreq/amd-pstate-trace.h new file mode 100644 index 000000000..35f38ae67 --- /dev/null +++ b/drivers/cpufreq/amd-pstate-trace.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * amd-pstate-trace.h - AMD Processor P-state Frequency Driver Tracer + * + * Copyright (C) 2021 Advanced Micro Devices, Inc. All Rights Reserved. + * + * Author: Huang Rui <ray.huang@amd.com> + */ + +#if !defined(_AMD_PSTATE_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define _AMD_PSTATE_TRACE_H + +#include <linux/cpufreq.h> +#include <linux/tracepoint.h> +#include <linux/trace_events.h> + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM amd_cpu + +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE amd-pstate-trace + +#define TPS(x) tracepoint_string(x) + +TRACE_EVENT(amd_pstate_perf, + + TP_PROTO(unsigned long min_perf, + unsigned long target_perf, + unsigned long capacity, + u64 freq, + u64 mperf, + u64 aperf, + u64 tsc, + unsigned int cpu_id, + bool changed, + bool fast_switch + ), + + TP_ARGS(min_perf, + target_perf, + capacity, + freq, + mperf, + aperf, + tsc, + cpu_id, + changed, + fast_switch + ), + + TP_STRUCT__entry( + __field(unsigned long, min_perf) + __field(unsigned long, target_perf) + __field(unsigned long, capacity) + __field(unsigned long long, freq) + __field(unsigned long long, mperf) + __field(unsigned long long, aperf) + __field(unsigned long long, tsc) + __field(unsigned int, cpu_id) + __field(bool, changed) + __field(bool, fast_switch) + ), + + TP_fast_assign( + __entry->min_perf = min_perf; + __entry->target_perf = target_perf; + __entry->capacity = capacity; + __entry->freq = freq; + __entry->mperf = mperf; + __entry->aperf = aperf; + __entry->tsc = tsc; + __entry->cpu_id = cpu_id; + __entry->changed = changed; + __entry->fast_switch = fast_switch; + ), + + TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu freq=%llu mperf=%llu aperf=%llu tsc=%llu cpu_id=%u changed=%s fast_switch=%s", + (unsigned long)__entry->min_perf, + (unsigned long)__entry->target_perf, + (unsigned long)__entry->capacity, + (unsigned long long)__entry->freq, + (unsigned long long)__entry->mperf, + (unsigned long long)__entry->aperf, + (unsigned long long)__entry->tsc, + (unsigned int)__entry->cpu_id, + (__entry->changed) ? "true" : "false", + (__entry->fast_switch) ? "true" : "false" + ) +); + +#endif /* _AMD_PSTATE_TRACE_H */ + +/* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . + +#include <trace/define_trace.h> diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c new file mode 100644 index 000000000..b448c8d6a --- /dev/null +++ b/drivers/cpufreq/amd-pstate-ut.c @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: GPL-1.0-or-later +/* + * AMD Processor P-state Frequency Driver Unit Test + * + * Copyright (C) 2022 Advanced Micro Devices, Inc. All Rights Reserved. + * + * Author: Meng Li <li.meng@amd.com> + * + * The AMD P-State Unit Test is a test module for testing the amd-pstate + * driver. 1) It can help all users to verify their processor support + * (SBIOS/Firmware or Hardware). 2) Kernel can have a basic function + * test to avoid the kernel regression during the update. 3) We can + * introduce more functional or performance tests to align the result + * together, it will benefit power and performance scale optimization. + * + * This driver implements basic framework with plans to enhance it with + * additional test cases to improve the depth and coverage of the test. + * + * See Documentation/admin-guide/pm/amd-pstate.rst Unit Tests for + * amd-pstate to get more detail. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/fs.h> +#include <linux/amd-pstate.h> + +#include <acpi/cppc_acpi.h> + +/* + * Abbreviations: + * amd_pstate_ut: used as a shortform for AMD P-State unit test. + * It helps to keep variable names smaller, simpler + */ +enum amd_pstate_ut_result { + AMD_PSTATE_UT_RESULT_PASS, + AMD_PSTATE_UT_RESULT_FAIL, +}; + +struct amd_pstate_ut_struct { + const char *name; + void (*func)(u32 index); + enum amd_pstate_ut_result result; +}; + +/* + * Kernel module for testing the AMD P-State unit test + */ +static void amd_pstate_ut_acpi_cpc_valid(u32 index); +static void amd_pstate_ut_check_enabled(u32 index); +static void amd_pstate_ut_check_perf(u32 index); +static void amd_pstate_ut_check_freq(u32 index); + +static struct amd_pstate_ut_struct amd_pstate_ut_cases[] = { + {"amd_pstate_ut_acpi_cpc_valid", amd_pstate_ut_acpi_cpc_valid }, + {"amd_pstate_ut_check_enabled", amd_pstate_ut_check_enabled }, + {"amd_pstate_ut_check_perf", amd_pstate_ut_check_perf }, + {"amd_pstate_ut_check_freq", amd_pstate_ut_check_freq } +}; + +static bool get_shared_mem(void) +{ + bool result = false; + + if (!boot_cpu_has(X86_FEATURE_CPPC)) + result = true; + + return result; +} + +/* + * check the _CPC object is present in SBIOS. + */ +static void amd_pstate_ut_acpi_cpc_valid(u32 index) +{ + if (acpi_cpc_valid()) + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS; + else { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s the _CPC object is not present in SBIOS!\n", __func__); + } +} + +static void amd_pstate_ut_pstate_enable(u32 index) +{ + int ret = 0; + u64 cppc_enable = 0; + + ret = rdmsrl_safe(MSR_AMD_CPPC_ENABLE, &cppc_enable); + if (ret) { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s rdmsrl_safe MSR_AMD_CPPC_ENABLE ret=%d error!\n", __func__, ret); + return; + } + if (cppc_enable) + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS; + else { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s amd pstate must be enabled!\n", __func__); + } +} + +/* + * check if amd pstate is enabled + */ +static void amd_pstate_ut_check_enabled(u32 index) +{ + if (get_shared_mem()) + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS; + else + amd_pstate_ut_pstate_enable(index); +} + +/* + * check if performance values are reasonable. + * highest_perf >= nominal_perf > lowest_nonlinear_perf > lowest_perf > 0 + */ +static void amd_pstate_ut_check_perf(u32 index) +{ + int cpu = 0, ret = 0; + u32 highest_perf = 0, nominal_perf = 0, lowest_nonlinear_perf = 0, lowest_perf = 0; + u64 cap1 = 0; + struct cppc_perf_caps cppc_perf; + struct cpufreq_policy *policy = NULL; + struct amd_cpudata *cpudata = NULL; + + highest_perf = amd_get_highest_perf(); + + for_each_possible_cpu(cpu) { + policy = cpufreq_cpu_get(cpu); + if (!policy) + break; + cpudata = policy->driver_data; + + if (get_shared_mem()) { + ret = cppc_get_perf_caps(cpu, &cppc_perf); + if (ret) { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s cppc_get_perf_caps ret=%d error!\n", __func__, ret); + goto skip_test; + } + + nominal_perf = cppc_perf.nominal_perf; + lowest_nonlinear_perf = cppc_perf.lowest_nonlinear_perf; + lowest_perf = cppc_perf.lowest_perf; + } else { + ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &cap1); + if (ret) { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s read CPPC_CAP1 ret=%d error!\n", __func__, ret); + goto skip_test; + } + + nominal_perf = AMD_CPPC_NOMINAL_PERF(cap1); + lowest_nonlinear_perf = AMD_CPPC_LOWNONLIN_PERF(cap1); + lowest_perf = AMD_CPPC_LOWEST_PERF(cap1); + } + + if ((highest_perf != READ_ONCE(cpudata->highest_perf)) || + (nominal_perf != READ_ONCE(cpudata->nominal_perf)) || + (lowest_nonlinear_perf != READ_ONCE(cpudata->lowest_nonlinear_perf)) || + (lowest_perf != READ_ONCE(cpudata->lowest_perf))) { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s cpu%d highest=%d %d nominal=%d %d lowest_nonlinear=%d %d lowest=%d %d, they should be equal!\n", + __func__, cpu, highest_perf, cpudata->highest_perf, + nominal_perf, cpudata->nominal_perf, + lowest_nonlinear_perf, cpudata->lowest_nonlinear_perf, + lowest_perf, cpudata->lowest_perf); + goto skip_test; + } + + if (!((highest_perf >= nominal_perf) && + (nominal_perf > lowest_nonlinear_perf) && + (lowest_nonlinear_perf > lowest_perf) && + (lowest_perf > 0))) { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s cpu%d highest=%d >= nominal=%d > lowest_nonlinear=%d > lowest=%d > 0, the formula is incorrect!\n", + __func__, cpu, highest_perf, nominal_perf, + lowest_nonlinear_perf, lowest_perf); + goto skip_test; + } + cpufreq_cpu_put(policy); + } + + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS; + return; +skip_test: + cpufreq_cpu_put(policy); +} + +/* + * Check if frequency values are reasonable. + * max_freq >= nominal_freq > lowest_nonlinear_freq > min_freq > 0 + * check max freq when set support boost mode. + */ +static void amd_pstate_ut_check_freq(u32 index) +{ + int cpu = 0; + struct cpufreq_policy *policy = NULL; + struct amd_cpudata *cpudata = NULL; + + for_each_possible_cpu(cpu) { + policy = cpufreq_cpu_get(cpu); + if (!policy) + break; + cpudata = policy->driver_data; + + if (!((cpudata->max_freq >= cpudata->nominal_freq) && + (cpudata->nominal_freq > cpudata->lowest_nonlinear_freq) && + (cpudata->lowest_nonlinear_freq > cpudata->min_freq) && + (cpudata->min_freq > 0))) { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s cpu%d max=%d >= nominal=%d > lowest_nonlinear=%d > min=%d > 0, the formula is incorrect!\n", + __func__, cpu, cpudata->max_freq, cpudata->nominal_freq, + cpudata->lowest_nonlinear_freq, cpudata->min_freq); + goto skip_test; + } + + if (cpudata->min_freq != policy->min) { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s cpu%d cpudata_min_freq=%d policy_min=%d, they should be equal!\n", + __func__, cpu, cpudata->min_freq, policy->min); + goto skip_test; + } + + if (cpudata->boost_supported) { + if ((policy->max == cpudata->max_freq) || + (policy->max == cpudata->nominal_freq)) + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS; + else { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s cpu%d policy_max=%d should be equal cpu_max=%d or cpu_nominal=%d !\n", + __func__, cpu, policy->max, cpudata->max_freq, + cpudata->nominal_freq); + goto skip_test; + } + } else { + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_FAIL; + pr_err("%s cpu%d must support boost!\n", __func__, cpu); + goto skip_test; + } + cpufreq_cpu_put(policy); + } + + amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS; + return; +skip_test: + cpufreq_cpu_put(policy); +} + +static int __init amd_pstate_ut_init(void) +{ + u32 i = 0, arr_size = ARRAY_SIZE(amd_pstate_ut_cases); + + for (i = 0; i < arr_size; i++) { + amd_pstate_ut_cases[i].func(i); + switch (amd_pstate_ut_cases[i].result) { + case AMD_PSTATE_UT_RESULT_PASS: + pr_info("%-4d %-20s\t success!\n", i+1, amd_pstate_ut_cases[i].name); + break; + case AMD_PSTATE_UT_RESULT_FAIL: + default: + pr_info("%-4d %-20s\t fail!\n", i+1, amd_pstate_ut_cases[i].name); + break; + } + } + + return 0; +} + +static void __exit amd_pstate_ut_exit(void) +{ +} + +module_init(amd_pstate_ut_init); +module_exit(amd_pstate_ut_exit); + +MODULE_AUTHOR("Meng Li <li.meng@amd.com>"); +MODULE_DESCRIPTION("AMD P-state driver Test module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c new file mode 100644 index 000000000..edc294ee5 --- /dev/null +++ b/drivers/cpufreq/amd-pstate.c @@ -0,0 +1,720 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * amd-pstate.c - AMD Processor P-state Frequency Driver + * + * Copyright (C) 2021 Advanced Micro Devices, Inc. All Rights Reserved. + * + * Author: Huang Rui <ray.huang@amd.com> + * + * AMD P-State introduces a new CPU performance scaling design for AMD + * processors using the ACPI Collaborative Performance and Power Control (CPPC) + * feature which works with the AMD SMU firmware providing a finer grained + * frequency control range. It is to replace the legacy ACPI P-States control, + * allows a flexible, low-latency interface for the Linux kernel to directly + * communicate the performance hints to hardware. + * + * AMD P-State is supported on recent AMD Zen base CPU series include some of + * Zen2 and Zen3 processors. _CPC needs to be present in the ACPI tables of AMD + * P-State supported system. And there are two types of hardware implementations + * for AMD P-State: 1) Full MSR Solution and 2) Shared Memory Solution. + * X86_FEATURE_CPPC CPU feature flag is used to distinguish the different types. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/compiler.h> +#include <linux/dmi.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/static_call.h> +#include <linux/amd-pstate.h> + +#include <acpi/processor.h> +#include <acpi/cppc_acpi.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpufeature.h> +#include <asm/cpu_device_id.h> +#include "amd-pstate-trace.h" + +#define AMD_PSTATE_TRANSITION_LATENCY 20000 +#define AMD_PSTATE_TRANSITION_DELAY 1000 + +/* + * TODO: We need more time to fine tune processors with shared memory solution + * with community together. + * + * There are some performance drops on the CPU benchmarks which reports from + * Suse. We are co-working with them to fine tune the shared memory solution. So + * we disable it by default to go acpi-cpufreq on these processors and add a + * module parameter to be able to enable it manually for debugging. + */ +static struct cpufreq_driver amd_pstate_driver; +static int cppc_load __initdata; + +static inline int pstate_enable(bool enable) +{ + return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable); +} + +static int cppc_enable(bool enable) +{ + int cpu, ret = 0; + + for_each_present_cpu(cpu) { + ret = cppc_set_enable(cpu, enable); + if (ret) + return ret; + } + + return ret; +} + +DEFINE_STATIC_CALL(amd_pstate_enable, pstate_enable); + +static inline int amd_pstate_enable(bool enable) +{ + return static_call(amd_pstate_enable)(enable); +} + +static int pstate_init_perf(struct amd_cpudata *cpudata) +{ + u64 cap1; + u32 highest_perf; + + int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1, + &cap1); + if (ret) + return ret; + + /* + * TODO: Introduce AMD specific power feature. + * + * CPPC entry doesn't indicate the highest performance in some ASICs. + */ + highest_perf = amd_get_highest_perf(); + if (highest_perf > AMD_CPPC_HIGHEST_PERF(cap1)) + highest_perf = AMD_CPPC_HIGHEST_PERF(cap1); + + WRITE_ONCE(cpudata->highest_perf, highest_perf); + + WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1)); + WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1)); + WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1)); + + return 0; +} + +static int cppc_init_perf(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + u32 highest_perf; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + highest_perf = amd_get_highest_perf(); + if (highest_perf > cppc_perf.highest_perf) + highest_perf = cppc_perf.highest_perf; + + WRITE_ONCE(cpudata->highest_perf, highest_perf); + + WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf); + WRITE_ONCE(cpudata->lowest_nonlinear_perf, + cppc_perf.lowest_nonlinear_perf); + WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf); + + return 0; +} + +DEFINE_STATIC_CALL(amd_pstate_init_perf, pstate_init_perf); + +static inline int amd_pstate_init_perf(struct amd_cpudata *cpudata) +{ + return static_call(amd_pstate_init_perf)(cpudata); +} + +static void pstate_update_perf(struct amd_cpudata *cpudata, u32 min_perf, + u32 des_perf, u32 max_perf, bool fast_switch) +{ + if (fast_switch) + wrmsrl(MSR_AMD_CPPC_REQ, READ_ONCE(cpudata->cppc_req_cached)); + else + wrmsrl_on_cpu(cpudata->cpu, MSR_AMD_CPPC_REQ, + READ_ONCE(cpudata->cppc_req_cached)); +} + +static void cppc_update_perf(struct amd_cpudata *cpudata, + u32 min_perf, u32 des_perf, + u32 max_perf, bool fast_switch) +{ + struct cppc_perf_ctrls perf_ctrls; + + perf_ctrls.max_perf = max_perf; + perf_ctrls.min_perf = min_perf; + perf_ctrls.desired_perf = des_perf; + + cppc_set_perf(cpudata->cpu, &perf_ctrls); +} + +DEFINE_STATIC_CALL(amd_pstate_update_perf, pstate_update_perf); + +static inline void amd_pstate_update_perf(struct amd_cpudata *cpudata, + u32 min_perf, u32 des_perf, + u32 max_perf, bool fast_switch) +{ + static_call(amd_pstate_update_perf)(cpudata, min_perf, des_perf, + max_perf, fast_switch); +} + +static inline bool amd_pstate_sample(struct amd_cpudata *cpudata) +{ + u64 aperf, mperf, tsc; + unsigned long flags; + + local_irq_save(flags); + rdmsrl(MSR_IA32_APERF, aperf); + rdmsrl(MSR_IA32_MPERF, mperf); + tsc = rdtsc(); + + if (cpudata->prev.mperf == mperf || cpudata->prev.tsc == tsc) { + local_irq_restore(flags); + return false; + } + + local_irq_restore(flags); + + cpudata->cur.aperf = aperf; + cpudata->cur.mperf = mperf; + cpudata->cur.tsc = tsc; + cpudata->cur.aperf -= cpudata->prev.aperf; + cpudata->cur.mperf -= cpudata->prev.mperf; + cpudata->cur.tsc -= cpudata->prev.tsc; + + cpudata->prev.aperf = aperf; + cpudata->prev.mperf = mperf; + cpudata->prev.tsc = tsc; + + cpudata->freq = div64_u64((cpudata->cur.aperf * cpu_khz), cpudata->cur.mperf); + + return true; +} + +static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf, + u32 des_perf, u32 max_perf, bool fast_switch) +{ + u64 prev = READ_ONCE(cpudata->cppc_req_cached); + u64 value = prev; + + des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf); + value &= ~AMD_CPPC_MIN_PERF(~0L); + value |= AMD_CPPC_MIN_PERF(min_perf); + + value &= ~AMD_CPPC_DES_PERF(~0L); + value |= AMD_CPPC_DES_PERF(des_perf); + + value &= ~AMD_CPPC_MAX_PERF(~0L); + value |= AMD_CPPC_MAX_PERF(max_perf); + + if (trace_amd_pstate_perf_enabled() && amd_pstate_sample(cpudata)) { + trace_amd_pstate_perf(min_perf, des_perf, max_perf, cpudata->freq, + cpudata->cur.mperf, cpudata->cur.aperf, cpudata->cur.tsc, + cpudata->cpu, (value != prev), fast_switch); + } + + if (value == prev) + return; + + WRITE_ONCE(cpudata->cppc_req_cached, value); + + amd_pstate_update_perf(cpudata, min_perf, des_perf, + max_perf, fast_switch); +} + +static int amd_pstate_verify(struct cpufreq_policy_data *policy) +{ + cpufreq_verify_within_cpu_limits(policy); + + return 0; +} + +static int amd_pstate_update_freq(struct cpufreq_policy *policy, + unsigned int target_freq, bool fast_switch) +{ + struct cpufreq_freqs freqs; + struct amd_cpudata *cpudata = policy->driver_data; + unsigned long max_perf, min_perf, des_perf, cap_perf; + + if (!cpudata->max_freq) + return -ENODEV; + + cap_perf = READ_ONCE(cpudata->highest_perf); + min_perf = READ_ONCE(cpudata->lowest_perf); + max_perf = cap_perf; + + freqs.old = policy->cur; + freqs.new = target_freq; + + des_perf = DIV_ROUND_CLOSEST(target_freq * cap_perf, + cpudata->max_freq); + + WARN_ON(fast_switch && !policy->fast_switch_enabled); + /* + * If fast_switch is desired, then there aren't any registered + * transition notifiers. See comment for + * cpufreq_enable_fast_switch(). + */ + if (!fast_switch) + cpufreq_freq_transition_begin(policy, &freqs); + + amd_pstate_update(cpudata, min_perf, des_perf, max_perf, fast_switch); + + if (!fast_switch) + cpufreq_freq_transition_end(policy, &freqs, false); + + return 0; +} + +static int amd_pstate_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + return amd_pstate_update_freq(policy, target_freq, false); +} + +static unsigned int amd_pstate_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + if (!amd_pstate_update_freq(policy, target_freq, true)) + return target_freq; + return policy->cur; +} + +static void amd_pstate_adjust_perf(unsigned int cpu, + unsigned long _min_perf, + unsigned long target_perf, + unsigned long capacity) +{ + unsigned long max_perf, min_perf, des_perf, + cap_perf, lowest_nonlinear_perf, max_freq; + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct amd_cpudata *cpudata = policy->driver_data; + unsigned int target_freq; + + cap_perf = READ_ONCE(cpudata->highest_perf); + lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf); + max_freq = READ_ONCE(cpudata->max_freq); + + des_perf = cap_perf; + if (target_perf < capacity) + des_perf = DIV_ROUND_UP(cap_perf * target_perf, capacity); + + min_perf = READ_ONCE(cpudata->highest_perf); + if (_min_perf < capacity) + min_perf = DIV_ROUND_UP(cap_perf * _min_perf, capacity); + + if (min_perf < lowest_nonlinear_perf) + min_perf = lowest_nonlinear_perf; + + max_perf = cap_perf; + if (max_perf < min_perf) + max_perf = min_perf; + + des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf); + target_freq = div_u64(des_perf * max_freq, max_perf); + policy->cur = target_freq; + + amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true); + cpufreq_cpu_put(policy); +} + +static int amd_get_min_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + /* Switch to khz */ + return cppc_perf.lowest_freq * 1000; +} + +static int amd_get_max_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + u32 max_perf, max_freq, nominal_freq, nominal_perf; + u64 boost_ratio; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + nominal_freq = cppc_perf.nominal_freq; + nominal_perf = READ_ONCE(cpudata->nominal_perf); + max_perf = READ_ONCE(cpudata->highest_perf); + + boost_ratio = div_u64(max_perf << SCHED_CAPACITY_SHIFT, + nominal_perf); + + max_freq = nominal_freq * boost_ratio >> SCHED_CAPACITY_SHIFT; + + /* Switch to khz */ + return max_freq * 1000; +} + +static int amd_get_nominal_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + /* Switch to khz */ + return cppc_perf.nominal_freq * 1000; +} + +static int amd_get_lowest_nonlinear_freq(struct amd_cpudata *cpudata) +{ + struct cppc_perf_caps cppc_perf; + u32 lowest_nonlinear_freq, lowest_nonlinear_perf, + nominal_freq, nominal_perf; + u64 lowest_nonlinear_ratio; + + int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf); + if (ret) + return ret; + + nominal_freq = cppc_perf.nominal_freq; + nominal_perf = READ_ONCE(cpudata->nominal_perf); + + lowest_nonlinear_perf = cppc_perf.lowest_nonlinear_perf; + + lowest_nonlinear_ratio = div_u64(lowest_nonlinear_perf << SCHED_CAPACITY_SHIFT, + nominal_perf); + + lowest_nonlinear_freq = nominal_freq * lowest_nonlinear_ratio >> SCHED_CAPACITY_SHIFT; + + /* Switch to khz */ + return lowest_nonlinear_freq * 1000; +} + +static int amd_pstate_set_boost(struct cpufreq_policy *policy, int state) +{ + struct amd_cpudata *cpudata = policy->driver_data; + int ret; + + if (!cpudata->boost_supported) { + pr_err("Boost mode is not supported by this processor or SBIOS\n"); + return -EINVAL; + } + + if (state) + policy->cpuinfo.max_freq = cpudata->max_freq; + else + policy->cpuinfo.max_freq = cpudata->nominal_freq; + + policy->max = policy->cpuinfo.max_freq; + + ret = freq_qos_update_request(&cpudata->req[1], + policy->cpuinfo.max_freq); + if (ret < 0) + return ret; + + return 0; +} + +static void amd_pstate_boost_init(struct amd_cpudata *cpudata) +{ + u32 highest_perf, nominal_perf; + + highest_perf = READ_ONCE(cpudata->highest_perf); + nominal_perf = READ_ONCE(cpudata->nominal_perf); + + if (highest_perf <= nominal_perf) + return; + + cpudata->boost_supported = true; + amd_pstate_driver.boost_enabled = true; +} + +static void amd_perf_ctl_reset(unsigned int cpu) +{ + wrmsrl_on_cpu(cpu, MSR_AMD_PERF_CTL, 0); +} + +static int amd_pstate_cpu_init(struct cpufreq_policy *policy) +{ + int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret; + struct device *dev; + struct amd_cpudata *cpudata; + + /* + * Resetting PERF_CTL_MSR will put the CPU in P0 frequency, + * which is ideal for initialization process. + */ + amd_perf_ctl_reset(policy->cpu); + dev = get_cpu_device(policy->cpu); + if (!dev) + return -ENODEV; + + cpudata = kzalloc(sizeof(*cpudata), GFP_KERNEL); + if (!cpudata) + return -ENOMEM; + + cpudata->cpu = policy->cpu; + + ret = amd_pstate_init_perf(cpudata); + if (ret) + goto free_cpudata1; + + min_freq = amd_get_min_freq(cpudata); + max_freq = amd_get_max_freq(cpudata); + nominal_freq = amd_get_nominal_freq(cpudata); + lowest_nonlinear_freq = amd_get_lowest_nonlinear_freq(cpudata); + + if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) { + dev_err(dev, "min_freq(%d) or max_freq(%d) value is incorrect\n", + min_freq, max_freq); + ret = -EINVAL; + goto free_cpudata1; + } + + policy->cpuinfo.transition_latency = AMD_PSTATE_TRANSITION_LATENCY; + policy->transition_delay_us = AMD_PSTATE_TRANSITION_DELAY; + + policy->min = min_freq; + policy->max = max_freq; + + policy->cpuinfo.min_freq = min_freq; + policy->cpuinfo.max_freq = max_freq; + + /* It will be updated by governor */ + policy->cur = policy->cpuinfo.min_freq; + + if (boot_cpu_has(X86_FEATURE_CPPC)) + policy->fast_switch_possible = true; + + ret = freq_qos_add_request(&policy->constraints, &cpudata->req[0], + FREQ_QOS_MIN, policy->cpuinfo.min_freq); + if (ret < 0) { + dev_err(dev, "Failed to add min-freq constraint (%d)\n", ret); + goto free_cpudata1; + } + + ret = freq_qos_add_request(&policy->constraints, &cpudata->req[1], + FREQ_QOS_MAX, policy->cpuinfo.max_freq); + if (ret < 0) { + dev_err(dev, "Failed to add max-freq constraint (%d)\n", ret); + goto free_cpudata2; + } + + /* Initial processor data capability frequencies */ + cpudata->max_freq = max_freq; + cpudata->min_freq = min_freq; + cpudata->nominal_freq = nominal_freq; + cpudata->lowest_nonlinear_freq = lowest_nonlinear_freq; + + policy->driver_data = cpudata; + + amd_pstate_boost_init(cpudata); + + return 0; + +free_cpudata2: + freq_qos_remove_request(&cpudata->req[0]); +free_cpudata1: + kfree(cpudata); + return ret; +} + +static int amd_pstate_cpu_exit(struct cpufreq_policy *policy) +{ + struct amd_cpudata *cpudata = policy->driver_data; + + freq_qos_remove_request(&cpudata->req[1]); + freq_qos_remove_request(&cpudata->req[0]); + policy->fast_switch_possible = false; + kfree(cpudata); + + return 0; +} + +static int amd_pstate_cpu_resume(struct cpufreq_policy *policy) +{ + int ret; + + ret = amd_pstate_enable(true); + if (ret) + pr_err("failed to enable amd-pstate during resume, return %d\n", ret); + + return ret; +} + +static int amd_pstate_cpu_suspend(struct cpufreq_policy *policy) +{ + int ret; + + ret = amd_pstate_enable(false); + if (ret) + pr_err("failed to disable amd-pstate during suspend, return %d\n", ret); + + return ret; +} + +/* Sysfs attributes */ + +/* + * This frequency is to indicate the maximum hardware frequency. + * If boost is not active but supported, the frequency will be larger than the + * one in cpuinfo. + */ +static ssize_t show_amd_pstate_max_freq(struct cpufreq_policy *policy, + char *buf) +{ + int max_freq; + struct amd_cpudata *cpudata = policy->driver_data; + + max_freq = amd_get_max_freq(cpudata); + if (max_freq < 0) + return max_freq; + + return sprintf(&buf[0], "%u\n", max_freq); +} + +static ssize_t show_amd_pstate_lowest_nonlinear_freq(struct cpufreq_policy *policy, + char *buf) +{ + int freq; + struct amd_cpudata *cpudata = policy->driver_data; + + freq = amd_get_lowest_nonlinear_freq(cpudata); + if (freq < 0) + return freq; + + return sprintf(&buf[0], "%u\n", freq); +} + +/* + * In some of ASICs, the highest_perf is not the one in the _CPC table, so we + * need to expose it to sysfs. + */ +static ssize_t show_amd_pstate_highest_perf(struct cpufreq_policy *policy, + char *buf) +{ + u32 perf; + struct amd_cpudata *cpudata = policy->driver_data; + + perf = READ_ONCE(cpudata->highest_perf); + + return sprintf(&buf[0], "%u\n", perf); +} + +cpufreq_freq_attr_ro(amd_pstate_max_freq); +cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq); + +cpufreq_freq_attr_ro(amd_pstate_highest_perf); + +static struct freq_attr *amd_pstate_attr[] = { + &amd_pstate_max_freq, + &amd_pstate_lowest_nonlinear_freq, + &amd_pstate_highest_perf, + NULL, +}; + +static struct cpufreq_driver amd_pstate_driver = { + .flags = CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_UPDATE_LIMITS, + .verify = amd_pstate_verify, + .target = amd_pstate_target, + .fast_switch = amd_pstate_fast_switch, + .init = amd_pstate_cpu_init, + .exit = amd_pstate_cpu_exit, + .suspend = amd_pstate_cpu_suspend, + .resume = amd_pstate_cpu_resume, + .set_boost = amd_pstate_set_boost, + .name = "amd-pstate", + .attr = amd_pstate_attr, +}; + +static int __init amd_pstate_init(void) +{ + int ret; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return -ENODEV; + /* + * by default the pstate driver is disabled to load + * enable the amd_pstate passive mode driver explicitly + * with amd_pstate=passive in kernel command line + */ + if (!cppc_load) { + pr_debug("driver load is disabled, boot with amd_pstate=passive to enable this\n"); + return -ENODEV; + } + + if (!acpi_cpc_valid()) { + pr_warn_once("the _CPC object is not present in SBIOS or ACPI disabled\n"); + return -ENODEV; + } + + /* don't keep reloading if cpufreq_driver exists */ + if (cpufreq_get_current_driver()) + return -EEXIST; + + /* capability check */ + if (boot_cpu_has(X86_FEATURE_CPPC)) { + pr_debug("AMD CPPC MSR based functionality is supported\n"); + amd_pstate_driver.adjust_perf = amd_pstate_adjust_perf; + } else { + pr_debug("AMD CPPC shared memory based functionality is supported\n"); + static_call_update(amd_pstate_enable, cppc_enable); + static_call_update(amd_pstate_init_perf, cppc_init_perf); + static_call_update(amd_pstate_update_perf, cppc_update_perf); + } + + /* enable amd pstate feature */ + ret = amd_pstate_enable(true); + if (ret) { + pr_err("failed to enable amd-pstate with return %d\n", ret); + return ret; + } + + ret = cpufreq_register_driver(&amd_pstate_driver); + if (ret) + pr_err("failed to register amd_pstate_driver with return %d\n", + ret); + + return ret; +} +device_initcall(amd_pstate_init); + +static int __init amd_pstate_param(char *str) +{ + if (!str) + return -EINVAL; + + if (!strcmp(str, "disable")) { + cppc_load = 0; + pr_info("driver is explicitly disabled\n"); + } else if (!strcmp(str, "passive")) + cppc_load = 1; + + return 0; +} +early_param("amd_pstate", amd_pstate_param); + +MODULE_AUTHOR("Huang Rui <ray.huang@amd.com>"); +MODULE_DESCRIPTION("AMD Processor P-state Frequency Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/amd_freq_sensitivity.c b/drivers/cpufreq/amd_freq_sensitivity.c new file mode 100644 index 000000000..59b19b997 --- /dev/null +++ b/drivers/cpufreq/amd_freq_sensitivity.c @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * amd_freq_sensitivity.c: AMD frequency sensitivity feedback powersave bias + * for the ondemand governor. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * + * Author: Jacob Shin <jacob.shin@amd.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/percpu-defs.h> +#include <linux/init.h> +#include <linux/mod_devicetable.h> + +#include <asm/msr.h> +#include <asm/cpufeature.h> +#include <asm/cpu_device_id.h> + +#include "cpufreq_ondemand.h" + +#define MSR_AMD64_FREQ_SENSITIVITY_ACTUAL 0xc0010080 +#define MSR_AMD64_FREQ_SENSITIVITY_REFERENCE 0xc0010081 +#define CLASS_CODE_SHIFT 56 +#define POWERSAVE_BIAS_MAX 1000 +#define POWERSAVE_BIAS_DEF 400 + +struct cpu_data_t { + u64 actual; + u64 reference; + unsigned int freq_prev; +}; + +static DEFINE_PER_CPU(struct cpu_data_t, cpu_data); + +static unsigned int amd_powersave_bias_target(struct cpufreq_policy *policy, + unsigned int freq_next, + unsigned int relation) +{ + int sensitivity; + long d_actual, d_reference; + struct msr actual, reference; + struct cpu_data_t *data = &per_cpu(cpu_data, policy->cpu); + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *od_data = policy_dbs->dbs_data; + struct od_dbs_tuners *od_tuners = od_data->tuners; + + if (!policy->freq_table) + return freq_next; + + rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, + &actual.l, &actual.h); + rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_REFERENCE, + &reference.l, &reference.h); + actual.h &= 0x00ffffff; + reference.h &= 0x00ffffff; + + /* counter wrapped around, so stay on current frequency */ + if (actual.q < data->actual || reference.q < data->reference) { + freq_next = policy->cur; + goto out; + } + + d_actual = actual.q - data->actual; + d_reference = reference.q - data->reference; + + /* divide by 0, so stay on current frequency as well */ + if (d_reference == 0) { + freq_next = policy->cur; + goto out; + } + + sensitivity = POWERSAVE_BIAS_MAX - + (POWERSAVE_BIAS_MAX * (d_reference - d_actual) / d_reference); + + clamp(sensitivity, 0, POWERSAVE_BIAS_MAX); + + /* this workload is not CPU bound, so choose a lower freq */ + if (sensitivity < od_tuners->powersave_bias) { + if (data->freq_prev == policy->cur) + freq_next = policy->cur; + + if (freq_next > policy->cur) + freq_next = policy->cur; + else if (freq_next < policy->cur) + freq_next = policy->min; + else { + unsigned int index; + + index = cpufreq_table_find_index_h(policy, + policy->cur - 1, + relation & CPUFREQ_RELATION_E); + freq_next = policy->freq_table[index].frequency; + } + + data->freq_prev = freq_next; + } else + data->freq_prev = 0; + +out: + data->actual = actual.q; + data->reference = reference.q; + return freq_next; +} + +static int __init amd_freq_sensitivity_init(void) +{ + u64 val; + struct pci_dev *pcidev; + unsigned int pci_vendor; + + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + pci_vendor = PCI_VENDOR_ID_AMD; + else if (boot_cpu_data.x86_vendor == X86_VENDOR_HYGON) + pci_vendor = PCI_VENDOR_ID_HYGON; + else + return -ENODEV; + + pcidev = pci_get_device(pci_vendor, + PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, NULL); + + if (!pcidev) { + if (!boot_cpu_has(X86_FEATURE_PROC_FEEDBACK)) + return -ENODEV; + } else { + pci_dev_put(pcidev); + } + + if (rdmsrl_safe(MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, &val)) + return -ENODEV; + + if (!(val >> CLASS_CODE_SHIFT)) + return -ENODEV; + + od_register_powersave_bias_handler(amd_powersave_bias_target, + POWERSAVE_BIAS_DEF); + return 0; +} +late_initcall(amd_freq_sensitivity_init); + +static void __exit amd_freq_sensitivity_exit(void) +{ + od_unregister_powersave_bias_handler(); +} +module_exit(amd_freq_sensitivity_exit); + +static const struct x86_cpu_id __maybe_unused amd_freq_sensitivity_ids[] = { + X86_MATCH_FEATURE(X86_FEATURE_PROC_FEEDBACK, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, amd_freq_sensitivity_ids); + +MODULE_AUTHOR("Jacob Shin <jacob.shin@amd.com>"); +MODULE_DESCRIPTION("AMD frequency sensitivity feedback powersave bias for " + "the ondemand governor."); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c new file mode 100644 index 000000000..b74289a95 --- /dev/null +++ b/drivers/cpufreq/armada-37xx-cpufreq.c @@ -0,0 +1,564 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * CPU frequency scaling support for Armada 37xx platform. + * + * Copyright (C) 2017 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include "cpufreq-dt.h" + +/* Clk register set */ +#define ARMADA_37XX_CLK_TBG_SEL 0 +#define ARMADA_37XX_CLK_TBG_SEL_CPU_OFF 22 + +/* Power management in North Bridge register set */ +#define ARMADA_37XX_NB_L0L1 0x18 +#define ARMADA_37XX_NB_L2L3 0x1C +#define ARMADA_37XX_NB_TBG_DIV_OFF 13 +#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7 +#define ARMADA_37XX_NB_CLK_SEL_OFF 11 +#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1 +#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1 +#define ARMADA_37XX_NB_TBG_SEL_OFF 9 +#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3 +#define ARMADA_37XX_NB_VDD_SEL_OFF 6 +#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3 +#define ARMADA_37XX_NB_CONFIG_SHIFT 16 +#define ARMADA_37XX_NB_DYN_MOD 0x24 +#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26) +#define ARMADA_37XX_NB_TBG_EN BIT(28) +#define ARMADA_37XX_NB_DIV_EN BIT(29) +#define ARMADA_37XX_NB_VDD_EN BIT(30) +#define ARMADA_37XX_NB_DFS_EN BIT(31) +#define ARMADA_37XX_NB_CPU_LOAD 0x30 +#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3 +#define ARMADA_37XX_DVFS_LOAD_0 0 +#define ARMADA_37XX_DVFS_LOAD_1 1 +#define ARMADA_37XX_DVFS_LOAD_2 2 +#define ARMADA_37XX_DVFS_LOAD_3 3 + +/* AVS register set */ +#define ARMADA_37XX_AVS_CTL0 0x0 +#define ARMADA_37XX_AVS_ENABLE BIT(30) +#define ARMADA_37XX_AVS_HIGH_VDD_LIMIT 16 +#define ARMADA_37XX_AVS_LOW_VDD_LIMIT 22 +#define ARMADA_37XX_AVS_VDD_MASK 0x3F +#define ARMADA_37XX_AVS_CTL2 0x8 +#define ARMADA_37XX_AVS_LOW_VDD_EN BIT(6) +#define ARMADA_37XX_AVS_VSET(x) (0x1C + 4 * (x)) + +/* + * On Armada 37xx the Power management manages 4 level of CPU load, + * each level can be associated with a CPU clock source, a CPU + * divider, a VDD level, etc... + */ +#define LOAD_LEVEL_NR 4 + +#define MIN_VOLT_MV 1000 +#define MIN_VOLT_MV_FOR_L1_1000MHZ 1108 +#define MIN_VOLT_MV_FOR_L1_1200MHZ 1155 + +/* AVS value for the corresponding voltage (in mV) */ +static int avs_map[] = { + 747, 758, 770, 782, 793, 805, 817, 828, 840, 852, 863, 875, 887, 898, + 910, 922, 933, 945, 957, 968, 980, 992, 1003, 1015, 1027, 1038, 1050, + 1062, 1073, 1085, 1097, 1108, 1120, 1132, 1143, 1155, 1167, 1178, 1190, + 1202, 1213, 1225, 1237, 1248, 1260, 1272, 1283, 1295, 1307, 1318, 1330, + 1342 +}; + +struct armada37xx_cpufreq_state { + struct platform_device *pdev; + struct device *cpu_dev; + struct regmap *regmap; + u32 nb_l0l1; + u32 nb_l2l3; + u32 nb_dyn_mod; + u32 nb_cpu_load; +}; + +static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state; + +struct armada_37xx_dvfs { + u32 cpu_freq_max; + u8 divider[LOAD_LEVEL_NR]; + u32 avs[LOAD_LEVEL_NR]; +}; + +static struct armada_37xx_dvfs armada_37xx_dvfs[] = { + /* + * The cpufreq scaling for 1.2 GHz variant of the SOC is currently + * unstable because we do not know how to configure it properly. + */ + /* {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, */ + {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} }, + {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} }, + {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} }, +}; + +static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) { + if (freq == armada_37xx_dvfs[i].cpu_freq_max) + return &armada_37xx_dvfs[i]; + } + + pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000); + return NULL; +} + +/* + * Setup the four level managed by the hardware. Once the four level + * will be configured then the DVFS will be enabled. + */ +static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base, + struct regmap *clk_base, u8 *divider) +{ + u32 cpu_tbg_sel; + int load_lvl; + + /* Determine to which TBG clock is CPU connected */ + regmap_read(clk_base, ARMADA_37XX_CLK_TBG_SEL, &cpu_tbg_sel); + cpu_tbg_sel >>= ARMADA_37XX_CLK_TBG_SEL_CPU_OFF; + cpu_tbg_sel &= ARMADA_37XX_NB_TBG_SEL_MASK; + + for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) { + unsigned int reg, mask, val, offset = 0; + + if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1) + reg = ARMADA_37XX_NB_L0L1; + else + reg = ARMADA_37XX_NB_L2L3; + + if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 || + load_lvl == ARMADA_37XX_DVFS_LOAD_2) + offset += ARMADA_37XX_NB_CONFIG_SHIFT; + + /* Set cpu clock source, for all the level we use TBG */ + val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF; + mask = (ARMADA_37XX_NB_CLK_SEL_MASK + << ARMADA_37XX_NB_CLK_SEL_OFF); + + /* Set TBG index, for all levels we use the same TBG */ + val = cpu_tbg_sel << ARMADA_37XX_NB_TBG_SEL_OFF; + mask = (ARMADA_37XX_NB_TBG_SEL_MASK + << ARMADA_37XX_NB_TBG_SEL_OFF); + + /* + * Set cpu divider based on the pre-computed array in + * order to have balanced step. + */ + val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF; + mask |= (ARMADA_37XX_NB_TBG_DIV_MASK + << ARMADA_37XX_NB_TBG_DIV_OFF); + + /* Set VDD divider which is actually the load level. */ + val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF; + mask |= (ARMADA_37XX_NB_VDD_SEL_MASK + << ARMADA_37XX_NB_VDD_SEL_OFF); + + val <<= offset; + mask <<= offset; + + regmap_update_bits(base, reg, mask, val); + } +} + +/* + * Find out the armada 37x supported AVS value whose voltage value is + * the round-up closest to the target voltage value. + */ +static u32 armada_37xx_avs_val_match(int target_vm) +{ + u32 avs; + + /* Find out the round-up closest supported voltage value */ + for (avs = 0; avs < ARRAY_SIZE(avs_map); avs++) + if (avs_map[avs] >= target_vm) + break; + + /* + * If all supported voltages are smaller than target one, + * choose the largest supported voltage + */ + if (avs == ARRAY_SIZE(avs_map)) + avs = ARRAY_SIZE(avs_map) - 1; + + return avs; +} + +/* + * For Armada 37xx soc, L0(VSET0) VDD AVS value is set to SVC revision + * value or a default value when SVC is not supported. + * - L0 can be read out from the register of AVS_CTRL_0 and L0 voltage + * can be got from the mapping table of avs_map. + * - L1 voltage should be about 100mv smaller than L0 voltage + * - L2 & L3 voltage should be about 150mv smaller than L0 voltage. + * This function calculates L1 & L2 & L3 AVS values dynamically based + * on L0 voltage and fill all AVS values to the AVS value table. + * When base CPU frequency is 1000 or 1200 MHz then there is additional + * minimal avs value for load L1. + */ +static void __init armada37xx_cpufreq_avs_configure(struct regmap *base, + struct armada_37xx_dvfs *dvfs) +{ + unsigned int target_vm; + int load_level = 0; + u32 l0_vdd_min; + + if (base == NULL) + return; + + /* Get L0 VDD min value */ + regmap_read(base, ARMADA_37XX_AVS_CTL0, &l0_vdd_min); + l0_vdd_min = (l0_vdd_min >> ARMADA_37XX_AVS_LOW_VDD_LIMIT) & + ARMADA_37XX_AVS_VDD_MASK; + if (l0_vdd_min >= ARRAY_SIZE(avs_map)) { + pr_err("L0 VDD MIN %d is not correct.\n", l0_vdd_min); + return; + } + dvfs->avs[0] = l0_vdd_min; + + if (avs_map[l0_vdd_min] <= MIN_VOLT_MV) { + /* + * If L0 voltage is smaller than 1000mv, then all VDD sets + * use L0 voltage; + */ + u32 avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV); + + for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) + dvfs->avs[load_level] = avs_min; + + /* + * Set the avs values for load L0 and L1 when base CPU frequency + * is 1000/1200 MHz to its typical initial values according to + * the Armada 3700 Hardware Specifications. + */ + if (dvfs->cpu_freq_max >= 1000*1000*1000) { + if (dvfs->cpu_freq_max >= 1200*1000*1000) + avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1200MHZ); + else + avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1000MHZ); + dvfs->avs[0] = dvfs->avs[1] = avs_min; + } + + return; + } + + /* + * L1 voltage is equal to L0 voltage - 100mv and it must be + * larger than 1000mv + */ + + target_vm = avs_map[l0_vdd_min] - 100; + target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV; + dvfs->avs[1] = armada_37xx_avs_val_match(target_vm); + + /* + * L2 & L3 voltage is equal to L0 voltage - 150mv and it must + * be larger than 1000mv + */ + target_vm = avs_map[l0_vdd_min] - 150; + target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV; + dvfs->avs[2] = dvfs->avs[3] = armada_37xx_avs_val_match(target_vm); + + /* + * Fix the avs value for load L1 when base CPU frequency is 1000/1200 MHz, + * otherwise the CPU gets stuck when switching from load L1 to load L0. + * Also ensure that avs value for load L1 is not higher than for L0. + */ + if (dvfs->cpu_freq_max >= 1000*1000*1000) { + u32 avs_min_l1; + + if (dvfs->cpu_freq_max >= 1200*1000*1000) + avs_min_l1 = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1200MHZ); + else + avs_min_l1 = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1000MHZ); + + if (avs_min_l1 > dvfs->avs[0]) + avs_min_l1 = dvfs->avs[0]; + + if (dvfs->avs[1] < avs_min_l1) + dvfs->avs[1] = avs_min_l1; + } +} + +static void __init armada37xx_cpufreq_avs_setup(struct regmap *base, + struct armada_37xx_dvfs *dvfs) +{ + unsigned int avs_val = 0; + int load_level = 0; + + if (base == NULL) + return; + + /* Disable AVS before the configuration */ + regmap_update_bits(base, ARMADA_37XX_AVS_CTL0, + ARMADA_37XX_AVS_ENABLE, 0); + + + /* Enable low voltage mode */ + regmap_update_bits(base, ARMADA_37XX_AVS_CTL2, + ARMADA_37XX_AVS_LOW_VDD_EN, + ARMADA_37XX_AVS_LOW_VDD_EN); + + + for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) { + avs_val = dvfs->avs[load_level]; + regmap_update_bits(base, ARMADA_37XX_AVS_VSET(load_level-1), + ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_HIGH_VDD_LIMIT | + ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_LOW_VDD_LIMIT, + avs_val << ARMADA_37XX_AVS_HIGH_VDD_LIMIT | + avs_val << ARMADA_37XX_AVS_LOW_VDD_LIMIT); + } + + /* Enable AVS after the configuration */ + regmap_update_bits(base, ARMADA_37XX_AVS_CTL0, + ARMADA_37XX_AVS_ENABLE, + ARMADA_37XX_AVS_ENABLE); + +} + +static void armada37xx_cpufreq_disable_dvfs(struct regmap *base) +{ + unsigned int reg = ARMADA_37XX_NB_DYN_MOD, + mask = ARMADA_37XX_NB_DFS_EN; + + regmap_update_bits(base, reg, mask, 0); +} + +static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base) +{ + unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD, + mask = ARMADA_37XX_NB_CPU_LOAD_MASK; + + /* Start with the highest load (0) */ + val = ARMADA_37XX_DVFS_LOAD_0; + regmap_update_bits(base, reg, mask, val); + + /* Now enable DVFS for the CPUs */ + reg = ARMADA_37XX_NB_DYN_MOD; + mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN | + ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN | + ARMADA_37XX_NB_DFS_EN; + + regmap_update_bits(base, reg, mask, mask); +} + +static int armada37xx_cpufreq_suspend(struct cpufreq_policy *policy) +{ + struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state; + + regmap_read(state->regmap, ARMADA_37XX_NB_L0L1, &state->nb_l0l1); + regmap_read(state->regmap, ARMADA_37XX_NB_L2L3, &state->nb_l2l3); + regmap_read(state->regmap, ARMADA_37XX_NB_CPU_LOAD, + &state->nb_cpu_load); + regmap_read(state->regmap, ARMADA_37XX_NB_DYN_MOD, &state->nb_dyn_mod); + + return 0; +} + +static int armada37xx_cpufreq_resume(struct cpufreq_policy *policy) +{ + struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state; + + /* Ensure DVFS is disabled otherwise the following registers are RO */ + armada37xx_cpufreq_disable_dvfs(state->regmap); + + regmap_write(state->regmap, ARMADA_37XX_NB_L0L1, state->nb_l0l1); + regmap_write(state->regmap, ARMADA_37XX_NB_L2L3, state->nb_l2l3); + regmap_write(state->regmap, ARMADA_37XX_NB_CPU_LOAD, + state->nb_cpu_load); + + /* + * NB_DYN_MOD register is the one that actually enable back DVFS if it + * was enabled before the suspend operation. This must be done last + * otherwise other registers are not writable. + */ + regmap_write(state->regmap, ARMADA_37XX_NB_DYN_MOD, state->nb_dyn_mod); + + return 0; +} + +static int __init armada37xx_cpufreq_driver_init(void) +{ + struct cpufreq_dt_platform_data pdata; + struct armada_37xx_dvfs *dvfs; + struct platform_device *pdev; + unsigned long freq; + unsigned int base_frequency; + struct regmap *nb_clk_base, *nb_pm_base, *avs_base; + struct device *cpu_dev; + int load_lvl, ret; + struct clk *clk, *parent; + + nb_clk_base = + syscon_regmap_lookup_by_compatible("marvell,armada-3700-periph-clock-nb"); + if (IS_ERR(nb_clk_base)) + return -ENODEV; + + nb_pm_base = + syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm"); + + if (IS_ERR(nb_pm_base)) + return -ENODEV; + + avs_base = + syscon_regmap_lookup_by_compatible("marvell,armada-3700-avs"); + + /* if AVS is not present don't use it but still try to setup dvfs */ + if (IS_ERR(avs_base)) { + pr_info("Syscon failed for Adapting Voltage Scaling: skip it\n"); + avs_base = NULL; + } + /* Before doing any configuration on the DVFS first, disable it */ + armada37xx_cpufreq_disable_dvfs(nb_pm_base); + + /* + * On CPU 0 register the operating points supported (which are + * the nominal CPU frequency and full integer divisions of + * it). + */ + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + dev_err(cpu_dev, "Cannot get CPU\n"); + return -ENODEV; + } + + clk = clk_get(cpu_dev, NULL); + if (IS_ERR(clk)) { + dev_err(cpu_dev, "Cannot get clock for CPU0\n"); + return PTR_ERR(clk); + } + + parent = clk_get_parent(clk); + if (IS_ERR(parent)) { + dev_err(cpu_dev, "Cannot get parent clock for CPU0\n"); + clk_put(clk); + return PTR_ERR(parent); + } + + /* Get parent CPU frequency */ + base_frequency = clk_get_rate(parent); + + if (!base_frequency) { + dev_err(cpu_dev, "Failed to get parent clock rate for CPU\n"); + clk_put(clk); + return -EINVAL; + } + + dvfs = armada_37xx_cpu_freq_info_get(base_frequency); + if (!dvfs) { + clk_put(clk); + return -EINVAL; + } + + armada37xx_cpufreq_state = kmalloc(sizeof(*armada37xx_cpufreq_state), + GFP_KERNEL); + if (!armada37xx_cpufreq_state) { + clk_put(clk); + return -ENOMEM; + } + + armada37xx_cpufreq_state->regmap = nb_pm_base; + + armada37xx_cpufreq_avs_configure(avs_base, dvfs); + armada37xx_cpufreq_avs_setup(avs_base, dvfs); + + armada37xx_cpufreq_dvfs_setup(nb_pm_base, nb_clk_base, dvfs->divider); + clk_put(clk); + + for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; + load_lvl++) { + unsigned long u_volt = avs_map[dvfs->avs[load_lvl]] * 1000; + freq = base_frequency / dvfs->divider[load_lvl]; + ret = dev_pm_opp_add(cpu_dev, freq, u_volt); + if (ret) + goto remove_opp; + + + } + + /* Now that everything is setup, enable the DVFS at hardware level */ + armada37xx_cpufreq_enable_dvfs(nb_pm_base); + + memset(&pdata, 0, sizeof(pdata)); + pdata.suspend = armada37xx_cpufreq_suspend; + pdata.resume = armada37xx_cpufreq_resume; + + pdev = platform_device_register_data(NULL, "cpufreq-dt", -1, &pdata, + sizeof(pdata)); + ret = PTR_ERR_OR_ZERO(pdev); + if (ret) + goto disable_dvfs; + + armada37xx_cpufreq_state->cpu_dev = cpu_dev; + armada37xx_cpufreq_state->pdev = pdev; + platform_set_drvdata(pdev, dvfs); + return 0; + +disable_dvfs: + armada37xx_cpufreq_disable_dvfs(nb_pm_base); +remove_opp: + /* clean-up the already added opp before leaving */ + while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) { + freq = base_frequency / dvfs->divider[load_lvl]; + dev_pm_opp_remove(cpu_dev, freq); + } + + kfree(armada37xx_cpufreq_state); + + return ret; +} +/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */ +late_initcall(armada37xx_cpufreq_driver_init); + +static void __exit armada37xx_cpufreq_driver_exit(void) +{ + struct platform_device *pdev = armada37xx_cpufreq_state->pdev; + struct armada_37xx_dvfs *dvfs = platform_get_drvdata(pdev); + unsigned long freq; + int load_lvl; + + platform_device_unregister(pdev); + + armada37xx_cpufreq_disable_dvfs(armada37xx_cpufreq_state->regmap); + + for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; load_lvl++) { + freq = dvfs->cpu_freq_max / dvfs->divider[load_lvl]; + dev_pm_opp_remove(armada37xx_cpufreq_state->cpu_dev, freq); + } + + kfree(armada37xx_cpufreq_state); +} +module_exit(armada37xx_cpufreq_driver_exit); + +static const struct of_device_id __maybe_unused armada37xx_cpufreq_of_match[] = { + { .compatible = "marvell,armada-3700-nb-pm" }, + { }, +}; +MODULE_DEVICE_TABLE(of, armada37xx_cpufreq_of_match); + +MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>"); +MODULE_DESCRIPTION("Armada 37xx cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/armada-8k-cpufreq.c b/drivers/cpufreq/armada-8k-cpufreq.c new file mode 100644 index 000000000..b0fc5e84f --- /dev/null +++ b/drivers/cpufreq/armada-8k-cpufreq.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * CPUFreq support for Armada 8K + * + * Copyright (C) 2018 Marvell + * + * Omri Itach <omrii@marvell.com> + * Gregory Clement <gregory.clement@bootlin.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> + +/* + * Setup the opps list with the divider for the max frequency, that + * will be filled at runtime. + */ +static const int opps_div[] __initconst = {1, 2, 3, 4}; + +static struct platform_device *armada_8k_pdev; + +struct freq_table { + struct device *cpu_dev; + unsigned int freq[ARRAY_SIZE(opps_div)]; +}; + +/* If the CPUs share the same clock, then they are in the same cluster. */ +static void __init armada_8k_get_sharing_cpus(struct clk *cur_clk, + struct cpumask *cpumask) +{ + int cpu; + + for_each_possible_cpu(cpu) { + struct device *cpu_dev; + struct clk *clk; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_warn("Failed to get cpu%d device\n", cpu); + continue; + } + + clk = clk_get(cpu_dev, 0); + if (IS_ERR(clk)) { + pr_warn("Cannot get clock for CPU %d\n", cpu); + } else { + if (clk_is_match(clk, cur_clk)) + cpumask_set_cpu(cpu, cpumask); + + clk_put(clk); + } + } +} + +static int __init armada_8k_add_opp(struct clk *clk, struct device *cpu_dev, + struct freq_table *freq_tables, + int opps_index) +{ + unsigned int cur_frequency; + unsigned int freq; + int i, ret; + + /* Get nominal (current) CPU frequency. */ + cur_frequency = clk_get_rate(clk); + if (!cur_frequency) { + dev_err(cpu_dev, "Failed to get clock rate for this CPU\n"); + return -EINVAL; + } + + freq_tables[opps_index].cpu_dev = cpu_dev; + + for (i = 0; i < ARRAY_SIZE(opps_div); i++) { + freq = cur_frequency / opps_div[i]; + + ret = dev_pm_opp_add(cpu_dev, freq, 0); + if (ret) + return ret; + + freq_tables[opps_index].freq[i] = freq; + } + + return 0; +} + +static void armada_8k_cpufreq_free_table(struct freq_table *freq_tables) +{ + int opps_index, nb_cpus = num_possible_cpus(); + + for (opps_index = 0 ; opps_index <= nb_cpus; opps_index++) { + int i; + + /* If cpu_dev is NULL then we reached the end of the array */ + if (!freq_tables[opps_index].cpu_dev) + break; + + for (i = 0; i < ARRAY_SIZE(opps_div); i++) { + /* + * A 0Hz frequency is not valid, this meant + * that it was not yet initialized so there is + * no more opp to free + */ + if (freq_tables[opps_index].freq[i] == 0) + break; + + dev_pm_opp_remove(freq_tables[opps_index].cpu_dev, + freq_tables[opps_index].freq[i]); + } + } + + kfree(freq_tables); +} + +static int __init armada_8k_cpufreq_init(void) +{ + int ret = 0, opps_index = 0, cpu, nb_cpus; + struct freq_table *freq_tables; + struct device_node *node; + struct cpumask cpus; + + node = of_find_compatible_node(NULL, NULL, "marvell,ap806-cpu-clock"); + if (!node || !of_device_is_available(node)) { + of_node_put(node); + return -ENODEV; + } + of_node_put(node); + + nb_cpus = num_possible_cpus(); + freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL); + if (!freq_tables) + return -ENOMEM; + cpumask_copy(&cpus, cpu_possible_mask); + + /* + * For each CPU, this loop registers the operating points + * supported (which are the nominal CPU frequency and full integer + * divisions of it). + */ + for_each_cpu(cpu, &cpus) { + struct cpumask shared_cpus; + struct device *cpu_dev; + struct clk *clk; + + cpu_dev = get_cpu_device(cpu); + + if (!cpu_dev) { + pr_err("Cannot get CPU %d\n", cpu); + continue; + } + + clk = clk_get(cpu_dev, 0); + + if (IS_ERR(clk)) { + pr_err("Cannot get clock for CPU %d\n", cpu); + ret = PTR_ERR(clk); + goto remove_opp; + } + + ret = armada_8k_add_opp(clk, cpu_dev, freq_tables, opps_index); + if (ret) { + clk_put(clk); + goto remove_opp; + } + + opps_index++; + cpumask_clear(&shared_cpus); + armada_8k_get_sharing_cpus(clk, &shared_cpus); + dev_pm_opp_set_sharing_cpus(cpu_dev, &shared_cpus); + cpumask_andnot(&cpus, &cpus, &shared_cpus); + clk_put(clk); + } + + armada_8k_pdev = platform_device_register_simple("cpufreq-dt", -1, + NULL, 0); + ret = PTR_ERR_OR_ZERO(armada_8k_pdev); + if (ret) + goto remove_opp; + + platform_set_drvdata(armada_8k_pdev, freq_tables); + + return 0; + +remove_opp: + armada_8k_cpufreq_free_table(freq_tables); + return ret; +} +module_init(armada_8k_cpufreq_init); + +static void __exit armada_8k_cpufreq_exit(void) +{ + struct freq_table *freq_tables = platform_get_drvdata(armada_8k_pdev); + + platform_device_unregister(armada_8k_pdev); + armada_8k_cpufreq_free_table(freq_tables); +} +module_exit(armada_8k_cpufreq_exit); + +static const struct of_device_id __maybe_unused armada_8k_cpufreq_of_match[] = { + { .compatible = "marvell,ap806-cpu-clock" }, + { }, +}; +MODULE_DEVICE_TABLE(of, armada_8k_cpufreq_of_match); + +MODULE_AUTHOR("Gregory Clement <gregory.clement@bootlin.com>"); +MODULE_DESCRIPTION("Armada 8K cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/bmips-cpufreq.c b/drivers/cpufreq/bmips-cpufreq.c new file mode 100644 index 000000000..39221a9a1 --- /dev/null +++ b/drivers/cpufreq/bmips-cpufreq.c @@ -0,0 +1,189 @@ +/* + * CPU frequency scaling for Broadcom BMIPS SoCs + * + * Copyright (c) 2017 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +/* for mips_hpt_frequency */ +#include <asm/time.h> + +#define BMIPS_CPUFREQ_PREFIX "bmips" +#define BMIPS_CPUFREQ_NAME BMIPS_CPUFREQ_PREFIX "-cpufreq" + +#define TRANSITION_LATENCY (25 * 1000) /* 25 us */ + +#define BMIPS5_CLK_DIV_SET_SHIFT 0x7 +#define BMIPS5_CLK_DIV_SHIFT 0x4 +#define BMIPS5_CLK_DIV_MASK 0xf + +enum bmips_type { + BMIPS5000, + BMIPS5200, +}; + +struct cpufreq_compat { + const char *compatible; + unsigned int bmips_type; + unsigned int clk_mult; + unsigned int max_freqs; +}; + +#define BMIPS(c, t, m, f) { \ + .compatible = c, \ + .bmips_type = (t), \ + .clk_mult = (m), \ + .max_freqs = (f), \ +} + +static struct cpufreq_compat bmips_cpufreq_compat[] = { + BMIPS("brcm,bmips5000", BMIPS5000, 8, 4), + BMIPS("brcm,bmips5200", BMIPS5200, 8, 4), + { } +}; + +static struct cpufreq_compat *priv; + +static int htp_freq_to_cpu_freq(unsigned int clk_mult) +{ + return mips_hpt_frequency * clk_mult / 1000; +} + +static struct cpufreq_frequency_table * +bmips_cpufreq_get_freq_table(const struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *table; + unsigned long cpu_freq; + int i; + + cpu_freq = htp_freq_to_cpu_freq(priv->clk_mult); + + table = kmalloc_array(priv->max_freqs + 1, sizeof(*table), GFP_KERNEL); + if (!table) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < priv->max_freqs; i++) { + table[i].frequency = cpu_freq / (1 << i); + table[i].driver_data = i; + } + table[i].frequency = CPUFREQ_TABLE_END; + + return table; +} + +static unsigned int bmips_cpufreq_get(unsigned int cpu) +{ + unsigned int div; + uint32_t mode; + + switch (priv->bmips_type) { + case BMIPS5200: + case BMIPS5000: + mode = read_c0_brcm_mode(); + div = ((mode >> BMIPS5_CLK_DIV_SHIFT) & BMIPS5_CLK_DIV_MASK); + break; + default: + div = 0; + } + + return htp_freq_to_cpu_freq(priv->clk_mult) / (1 << div); +} + +static int bmips_cpufreq_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int div = policy->freq_table[index].driver_data; + + switch (priv->bmips_type) { + case BMIPS5200: + case BMIPS5000: + change_c0_brcm_mode(BMIPS5_CLK_DIV_MASK << BMIPS5_CLK_DIV_SHIFT, + (1 << BMIPS5_CLK_DIV_SET_SHIFT) | + (div << BMIPS5_CLK_DIV_SHIFT)); + break; + default: + return -ENOTSUPP; + } + + return 0; +} + +static int bmips_cpufreq_exit(struct cpufreq_policy *policy) +{ + kfree(policy->freq_table); + + return 0; +} + +static int bmips_cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_table; + + freq_table = bmips_cpufreq_get_freq_table(policy); + if (IS_ERR(freq_table)) { + pr_err("%s: couldn't determine frequency table (%ld).\n", + BMIPS_CPUFREQ_NAME, PTR_ERR(freq_table)); + return PTR_ERR(freq_table); + } + + cpufreq_generic_init(policy, freq_table, TRANSITION_LATENCY); + pr_info("%s: registered\n", BMIPS_CPUFREQ_NAME); + + return 0; +} + +static struct cpufreq_driver bmips_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = bmips_cpufreq_target_index, + .get = bmips_cpufreq_get, + .init = bmips_cpufreq_init, + .exit = bmips_cpufreq_exit, + .attr = cpufreq_generic_attr, + .name = BMIPS_CPUFREQ_PREFIX, +}; + +static int __init bmips_cpufreq_driver_init(void) +{ + struct cpufreq_compat *cc; + struct device_node *np; + + for (cc = bmips_cpufreq_compat; cc->compatible; cc++) { + np = of_find_compatible_node(NULL, "cpu", cc->compatible); + if (np) { + of_node_put(np); + priv = cc; + break; + } + } + + /* We hit the guard element of the array. No compatible CPU found. */ + if (!cc->compatible) + return -ENODEV; + + return cpufreq_register_driver(&bmips_cpufreq_driver); +} +module_init(bmips_cpufreq_driver_init); + +static void __exit bmips_cpufreq_driver_exit(void) +{ + cpufreq_unregister_driver(&bmips_cpufreq_driver); +} +module_exit(bmips_cpufreq_driver_exit); + +MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>"); +MODULE_DESCRIPTION("CPUfreq driver for Broadcom BMIPS SoCs"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c new file mode 100644 index 000000000..f644c5e32 --- /dev/null +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c @@ -0,0 +1,786 @@ +/* + * CPU frequency scaling for Broadcom SoCs with AVS firmware that + * supports DVS or DVFS + * + * Copyright (c) 2016 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * "AVS" is the name of a firmware developed at Broadcom. It derives + * its name from the technique called "Adaptive Voltage Scaling". + * Adaptive voltage scaling was the original purpose of this firmware. + * The AVS firmware still supports "AVS mode", where all it does is + * adaptive voltage scaling. However, on some newer Broadcom SoCs, the + * AVS Firmware, despite its unchanged name, also supports DFS mode and + * DVFS mode. + * + * In the context of this document and the related driver, "AVS" by + * itself always means the Broadcom firmware and never refers to the + * technique called "Adaptive Voltage Scaling". + * + * The Broadcom STB AVS CPUfreq driver provides voltage and frequency + * scaling on Broadcom SoCs using AVS firmware with support for DFS and + * DVFS. The AVS firmware is running on its own co-processor. The + * driver supports both uniprocessor (UP) and symmetric multiprocessor + * (SMP) systems which share clock and voltage across all CPUs. + * + * Actual voltage and frequency scaling is done solely by the AVS + * firmware. This driver does not change frequency or voltage itself. + * It provides a standard CPUfreq interface to the rest of the kernel + * and to userland. It interfaces with the AVS firmware to effect the + * requested changes and to report back the current system status in a + * way that is expected by existing tools. + */ + +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/semaphore.h> + +/* Max number of arguments AVS calls take */ +#define AVS_MAX_CMD_ARGS 4 +/* + * This macro is used to generate AVS parameter register offsets. For + * x >= AVS_MAX_CMD_ARGS, it returns 0 to protect against accidental memory + * access outside of the parameter range. (Offset 0 is the first parameter.) + */ +#define AVS_PARAM_MULT(x) ((x) < AVS_MAX_CMD_ARGS ? (x) : 0) + +/* AVS Mailbox Register offsets */ +#define AVS_MBOX_COMMAND 0x00 +#define AVS_MBOX_STATUS 0x04 +#define AVS_MBOX_VOLTAGE0 0x08 +#define AVS_MBOX_TEMP0 0x0c +#define AVS_MBOX_PV0 0x10 +#define AVS_MBOX_MV0 0x14 +#define AVS_MBOX_PARAM(x) (0x18 + AVS_PARAM_MULT(x) * sizeof(u32)) +#define AVS_MBOX_REVISION 0x28 +#define AVS_MBOX_PSTATE 0x2c +#define AVS_MBOX_HEARTBEAT 0x30 +#define AVS_MBOX_MAGIC 0x34 +#define AVS_MBOX_SIGMA_HVT 0x38 +#define AVS_MBOX_SIGMA_SVT 0x3c +#define AVS_MBOX_VOLTAGE1 0x40 +#define AVS_MBOX_TEMP1 0x44 +#define AVS_MBOX_PV1 0x48 +#define AVS_MBOX_MV1 0x4c +#define AVS_MBOX_FREQUENCY 0x50 + +/* AVS Commands */ +#define AVS_CMD_AVAILABLE 0x00 +#define AVS_CMD_DISABLE 0x10 +#define AVS_CMD_ENABLE 0x11 +#define AVS_CMD_S2_ENTER 0x12 +#define AVS_CMD_S2_EXIT 0x13 +#define AVS_CMD_BBM_ENTER 0x14 +#define AVS_CMD_BBM_EXIT 0x15 +#define AVS_CMD_S3_ENTER 0x16 +#define AVS_CMD_S3_EXIT 0x17 +#define AVS_CMD_BALANCE 0x18 +/* PMAP and P-STATE commands */ +#define AVS_CMD_GET_PMAP 0x30 +#define AVS_CMD_SET_PMAP 0x31 +#define AVS_CMD_GET_PSTATE 0x40 +#define AVS_CMD_SET_PSTATE 0x41 + +/* Different modes AVS supports (for GET_PMAP/SET_PMAP) */ +#define AVS_MODE_AVS 0x0 +#define AVS_MODE_DFS 0x1 +#define AVS_MODE_DVS 0x2 +#define AVS_MODE_DVFS 0x3 + +/* + * PMAP parameter p1 + * unused:31-24, mdiv_p0:23-16, unused:15-14, pdiv:13-10 , ndiv_int:9-0 + */ +#define NDIV_INT_SHIFT 0 +#define NDIV_INT_MASK 0x3ff +#define PDIV_SHIFT 10 +#define PDIV_MASK 0xf +#define MDIV_P0_SHIFT 16 +#define MDIV_P0_MASK 0xff +/* + * PMAP parameter p2 + * mdiv_p4:31-24, mdiv_p3:23-16, mdiv_p2:15:8, mdiv_p1:7:0 + */ +#define MDIV_P1_SHIFT 0 +#define MDIV_P1_MASK 0xff +#define MDIV_P2_SHIFT 8 +#define MDIV_P2_MASK 0xff +#define MDIV_P3_SHIFT 16 +#define MDIV_P3_MASK 0xff +#define MDIV_P4_SHIFT 24 +#define MDIV_P4_MASK 0xff + +/* Different P-STATES AVS supports (for GET_PSTATE/SET_PSTATE) */ +#define AVS_PSTATE_P0 0x0 +#define AVS_PSTATE_P1 0x1 +#define AVS_PSTATE_P2 0x2 +#define AVS_PSTATE_P3 0x3 +#define AVS_PSTATE_P4 0x4 +#define AVS_PSTATE_MAX AVS_PSTATE_P4 + +/* CPU L2 Interrupt Controller Registers */ +#define AVS_CPU_L2_SET0 0x04 +#define AVS_CPU_L2_INT_MASK BIT(31) + +/* AVS Command Status Values */ +#define AVS_STATUS_CLEAR 0x00 +/* Command/notification accepted */ +#define AVS_STATUS_SUCCESS 0xf0 +/* Command/notification rejected */ +#define AVS_STATUS_FAILURE 0xff +/* Invalid command/notification (unknown) */ +#define AVS_STATUS_INVALID 0xf1 +/* Non-AVS modes are not supported */ +#define AVS_STATUS_NO_SUPP 0xf2 +/* Cannot set P-State until P-Map supplied */ +#define AVS_STATUS_NO_MAP 0xf3 +/* Cannot change P-Map after initial P-Map set */ +#define AVS_STATUS_MAP_SET 0xf4 +/* Max AVS status; higher numbers are used for debugging */ +#define AVS_STATUS_MAX 0xff + +/* Other AVS related constants */ +#define AVS_LOOP_LIMIT 10000 +#define AVS_TIMEOUT 300 /* in ms; expected completion is < 10ms */ +#define AVS_FIRMWARE_MAGIC 0xa11600d1 + +#define BRCM_AVS_CPUFREQ_PREFIX "brcmstb-avs" +#define BRCM_AVS_CPUFREQ_NAME BRCM_AVS_CPUFREQ_PREFIX "-cpufreq" +#define BRCM_AVS_CPU_DATA "brcm,avs-cpu-data-mem" +#define BRCM_AVS_CPU_INTR "brcm,avs-cpu-l2-intr" +#define BRCM_AVS_HOST_INTR "sw_intr" + +struct pmap { + unsigned int mode; + unsigned int p1; + unsigned int p2; + unsigned int state; +}; + +struct private_data { + void __iomem *base; + void __iomem *avs_intr_base; + struct device *dev; + struct completion done; + struct semaphore sem; + struct pmap pmap; + int host_irq; +}; + +static void __iomem *__map_region(const char *name) +{ + struct device_node *np; + void __iomem *ptr; + + np = of_find_compatible_node(NULL, NULL, name); + if (!np) + return NULL; + + ptr = of_iomap(np, 0); + of_node_put(np); + + return ptr; +} + +static unsigned long wait_for_avs_command(struct private_data *priv, + unsigned long timeout) +{ + unsigned long time_left = 0; + u32 val; + + /* Event driven, wait for the command interrupt */ + if (priv->host_irq >= 0) + return wait_for_completion_timeout(&priv->done, + msecs_to_jiffies(timeout)); + + /* Polling for command completion */ + do { + time_left = timeout; + val = readl(priv->base + AVS_MBOX_STATUS); + if (val) + break; + + usleep_range(1000, 2000); + } while (--timeout); + + return time_left; +} + +static int __issue_avs_command(struct private_data *priv, unsigned int cmd, + unsigned int num_in, unsigned int num_out, + u32 args[]) +{ + void __iomem *base = priv->base; + unsigned long time_left; + unsigned int i; + int ret; + u32 val; + + ret = down_interruptible(&priv->sem); + if (ret) + return ret; + + /* + * Make sure no other command is currently running: cmd is 0 if AVS + * co-processor is idle. Due to the guard above, we should almost never + * have to wait here. + */ + for (i = 0, val = 1; val != 0 && i < AVS_LOOP_LIMIT; i++) + val = readl(base + AVS_MBOX_COMMAND); + + /* Give the caller a chance to retry if AVS is busy. */ + if (i == AVS_LOOP_LIMIT) { + ret = -EAGAIN; + goto out; + } + + /* Clear status before we begin. */ + writel(AVS_STATUS_CLEAR, base + AVS_MBOX_STATUS); + + /* Provide input parameters */ + for (i = 0; i < num_in; i++) + writel(args[i], base + AVS_MBOX_PARAM(i)); + + /* Protect from spurious interrupts. */ + reinit_completion(&priv->done); + + /* Now issue the command & tell firmware to wake up to process it. */ + writel(cmd, base + AVS_MBOX_COMMAND); + writel(AVS_CPU_L2_INT_MASK, priv->avs_intr_base + AVS_CPU_L2_SET0); + + /* Wait for AVS co-processor to finish processing the command. */ + time_left = wait_for_avs_command(priv, AVS_TIMEOUT); + + /* + * If the AVS status is not in the expected range, it means AVS didn't + * complete our command in time, and we return an error. Also, if there + * is no "time left", we timed out waiting for the interrupt. + */ + val = readl(base + AVS_MBOX_STATUS); + if (time_left == 0 || val == 0 || val > AVS_STATUS_MAX) { + dev_err(priv->dev, "AVS command %#x didn't complete in time\n", + cmd); + dev_err(priv->dev, " Time left: %u ms, AVS status: %#x\n", + jiffies_to_msecs(time_left), val); + ret = -ETIMEDOUT; + goto out; + } + + /* Process returned values */ + for (i = 0; i < num_out; i++) + args[i] = readl(base + AVS_MBOX_PARAM(i)); + + /* Clear status to tell AVS co-processor we are done. */ + writel(AVS_STATUS_CLEAR, base + AVS_MBOX_STATUS); + + /* Convert firmware errors to errno's as much as possible. */ + switch (val) { + case AVS_STATUS_INVALID: + ret = -EINVAL; + break; + case AVS_STATUS_NO_SUPP: + ret = -ENOTSUPP; + break; + case AVS_STATUS_NO_MAP: + ret = -ENOENT; + break; + case AVS_STATUS_MAP_SET: + ret = -EEXIST; + break; + case AVS_STATUS_FAILURE: + ret = -EIO; + break; + } + +out: + up(&priv->sem); + + return ret; +} + +static irqreturn_t irq_handler(int irq, void *data) +{ + struct private_data *priv = data; + + /* AVS command completed execution. Wake up __issue_avs_command(). */ + complete(&priv->done); + + return IRQ_HANDLED; +} + +static char *brcm_avs_mode_to_string(unsigned int mode) +{ + switch (mode) { + case AVS_MODE_AVS: + return "AVS"; + case AVS_MODE_DFS: + return "DFS"; + case AVS_MODE_DVS: + return "DVS"; + case AVS_MODE_DVFS: + return "DVFS"; + } + return NULL; +} + +static void brcm_avs_parse_p1(u32 p1, unsigned int *mdiv_p0, unsigned int *pdiv, + unsigned int *ndiv) +{ + *mdiv_p0 = (p1 >> MDIV_P0_SHIFT) & MDIV_P0_MASK; + *pdiv = (p1 >> PDIV_SHIFT) & PDIV_MASK; + *ndiv = (p1 >> NDIV_INT_SHIFT) & NDIV_INT_MASK; +} + +static void brcm_avs_parse_p2(u32 p2, unsigned int *mdiv_p1, + unsigned int *mdiv_p2, unsigned int *mdiv_p3, + unsigned int *mdiv_p4) +{ + *mdiv_p4 = (p2 >> MDIV_P4_SHIFT) & MDIV_P4_MASK; + *mdiv_p3 = (p2 >> MDIV_P3_SHIFT) & MDIV_P3_MASK; + *mdiv_p2 = (p2 >> MDIV_P2_SHIFT) & MDIV_P2_MASK; + *mdiv_p1 = (p2 >> MDIV_P1_SHIFT) & MDIV_P1_MASK; +} + +static int brcm_avs_get_pmap(struct private_data *priv, struct pmap *pmap) +{ + u32 args[AVS_MAX_CMD_ARGS]; + int ret; + + ret = __issue_avs_command(priv, AVS_CMD_GET_PMAP, 0, 4, args); + if (ret || !pmap) + return ret; + + pmap->mode = args[0]; + pmap->p1 = args[1]; + pmap->p2 = args[2]; + pmap->state = args[3]; + + return 0; +} + +static int brcm_avs_set_pmap(struct private_data *priv, struct pmap *pmap) +{ + u32 args[AVS_MAX_CMD_ARGS]; + + args[0] = pmap->mode; + args[1] = pmap->p1; + args[2] = pmap->p2; + args[3] = pmap->state; + + return __issue_avs_command(priv, AVS_CMD_SET_PMAP, 4, 0, args); +} + +static int brcm_avs_get_pstate(struct private_data *priv, unsigned int *pstate) +{ + u32 args[AVS_MAX_CMD_ARGS]; + int ret; + + ret = __issue_avs_command(priv, AVS_CMD_GET_PSTATE, 0, 1, args); + if (ret) + return ret; + *pstate = args[0]; + + return 0; +} + +static int brcm_avs_set_pstate(struct private_data *priv, unsigned int pstate) +{ + u32 args[AVS_MAX_CMD_ARGS]; + + args[0] = pstate; + + return __issue_avs_command(priv, AVS_CMD_SET_PSTATE, 1, 0, args); + +} + +static u32 brcm_avs_get_voltage(void __iomem *base) +{ + return readl(base + AVS_MBOX_VOLTAGE1); +} + +static u32 brcm_avs_get_frequency(void __iomem *base) +{ + return readl(base + AVS_MBOX_FREQUENCY) * 1000; /* in kHz */ +} + +/* + * We determine which frequencies are supported by cycling through all P-states + * and reading back what frequency we are running at for each P-state. + */ +static struct cpufreq_frequency_table * +brcm_avs_get_freq_table(struct device *dev, struct private_data *priv) +{ + struct cpufreq_frequency_table *table; + unsigned int pstate; + int i, ret; + + /* Remember P-state for later */ + ret = brcm_avs_get_pstate(priv, &pstate); + if (ret) + return ERR_PTR(ret); + + /* + * We allocate space for the 5 different P-STATES AVS, + * plus extra space for a terminating element. + */ + table = devm_kcalloc(dev, AVS_PSTATE_MAX + 1 + 1, sizeof(*table), + GFP_KERNEL); + if (!table) + return ERR_PTR(-ENOMEM); + + for (i = AVS_PSTATE_P0; i <= AVS_PSTATE_MAX; i++) { + ret = brcm_avs_set_pstate(priv, i); + if (ret) + return ERR_PTR(ret); + table[i].frequency = brcm_avs_get_frequency(priv->base); + table[i].driver_data = i; + } + table[i].frequency = CPUFREQ_TABLE_END; + + /* Restore P-state */ + ret = brcm_avs_set_pstate(priv, pstate); + if (ret) + return ERR_PTR(ret); + + return table; +} + +/* + * To ensure the right firmware is running we need to + * - check the MAGIC matches what we expect + * - brcm_avs_get_pmap() doesn't return -ENOTSUPP or -EINVAL + * We need to set up our interrupt handling before calling brcm_avs_get_pmap()! + */ +static bool brcm_avs_is_firmware_loaded(struct private_data *priv) +{ + u32 magic; + int rc; + + rc = brcm_avs_get_pmap(priv, NULL); + magic = readl(priv->base + AVS_MBOX_MAGIC); + + return (magic == AVS_FIRMWARE_MAGIC) && ((rc != -ENOTSUPP) || + (rc != -EINVAL)); +} + +static unsigned int brcm_avs_cpufreq_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct private_data *priv = policy->driver_data; + + cpufreq_cpu_put(policy); + + return brcm_avs_get_frequency(priv->base); +} + +static int brcm_avs_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + return brcm_avs_set_pstate(policy->driver_data, + policy->freq_table[index].driver_data); +} + +static int brcm_avs_suspend(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + int ret; + + ret = brcm_avs_get_pmap(priv, &priv->pmap); + if (ret) + return ret; + + /* + * We can't use the P-state returned by brcm_avs_get_pmap(), since + * that's the initial P-state from when the P-map was downloaded to the + * AVS co-processor, not necessarily the P-state we are running at now. + * So, we get the current P-state explicitly. + */ + ret = brcm_avs_get_pstate(priv, &priv->pmap.state); + if (ret) + return ret; + + /* This is best effort. Nothing to do if it fails. */ + (void)__issue_avs_command(priv, AVS_CMD_S2_ENTER, 0, 0, NULL); + + return 0; +} + +static int brcm_avs_resume(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + int ret; + + /* This is best effort. Nothing to do if it fails. */ + (void)__issue_avs_command(priv, AVS_CMD_S2_EXIT, 0, 0, NULL); + + ret = brcm_avs_set_pmap(priv, &priv->pmap); + if (ret == -EEXIST) { + struct platform_device *pdev = cpufreq_get_driver_data(); + struct device *dev = &pdev->dev; + + dev_warn(dev, "PMAP was already set\n"); + ret = 0; + } + + return ret; +} + +/* + * All initialization code that we only want to execute once goes here. Setup + * code that can be re-tried on every core (if it failed before) can go into + * brcm_avs_cpufreq_init(). + */ +static int brcm_avs_prepare_init(struct platform_device *pdev) +{ + struct private_data *priv; + struct device *dev; + int ret; + + dev = &pdev->dev; + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + sema_init(&priv->sem, 1); + init_completion(&priv->done); + platform_set_drvdata(pdev, priv); + + priv->base = __map_region(BRCM_AVS_CPU_DATA); + if (!priv->base) { + dev_err(dev, "Couldn't find property %s in device tree.\n", + BRCM_AVS_CPU_DATA); + return -ENOENT; + } + + priv->avs_intr_base = __map_region(BRCM_AVS_CPU_INTR); + if (!priv->avs_intr_base) { + dev_err(dev, "Couldn't find property %s in device tree.\n", + BRCM_AVS_CPU_INTR); + ret = -ENOENT; + goto unmap_base; + } + + priv->host_irq = platform_get_irq_byname(pdev, BRCM_AVS_HOST_INTR); + + ret = devm_request_irq(dev, priv->host_irq, irq_handler, + IRQF_TRIGGER_RISING, + BRCM_AVS_HOST_INTR, priv); + if (ret && priv->host_irq >= 0) { + dev_err(dev, "IRQ request failed: %s (%d) -- %d\n", + BRCM_AVS_HOST_INTR, priv->host_irq, ret); + goto unmap_intr_base; + } + + if (brcm_avs_is_firmware_loaded(priv)) + return 0; + + dev_err(dev, "AVS firmware is not loaded or doesn't support DVFS\n"); + ret = -ENODEV; + +unmap_intr_base: + iounmap(priv->avs_intr_base); +unmap_base: + iounmap(priv->base); + + return ret; +} + +static void brcm_avs_prepare_uninit(struct platform_device *pdev) +{ + struct private_data *priv; + + priv = platform_get_drvdata(pdev); + + iounmap(priv->avs_intr_base); + iounmap(priv->base); +} + +static int brcm_avs_cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_table; + struct platform_device *pdev; + struct private_data *priv; + struct device *dev; + int ret; + + pdev = cpufreq_get_driver_data(); + priv = platform_get_drvdata(pdev); + policy->driver_data = priv; + dev = &pdev->dev; + + freq_table = brcm_avs_get_freq_table(dev, priv); + if (IS_ERR(freq_table)) { + ret = PTR_ERR(freq_table); + dev_err(dev, "Couldn't determine frequency table (%d).\n", ret); + return ret; + } + + policy->freq_table = freq_table; + + /* All cores share the same clock and thus the same policy. */ + cpumask_setall(policy->cpus); + + ret = __issue_avs_command(priv, AVS_CMD_ENABLE, 0, 0, NULL); + if (!ret) { + unsigned int pstate; + + ret = brcm_avs_get_pstate(priv, &pstate); + if (!ret) { + policy->cur = freq_table[pstate].frequency; + dev_info(dev, "registered\n"); + return 0; + } + } + + dev_err(dev, "couldn't initialize driver (%d)\n", ret); + + return ret; +} + +static ssize_t show_brcm_avs_pstate(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + unsigned int pstate; + + if (brcm_avs_get_pstate(priv, &pstate)) + return sprintf(buf, "<unknown>\n"); + + return sprintf(buf, "%u\n", pstate); +} + +static ssize_t show_brcm_avs_mode(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + struct pmap pmap; + + if (brcm_avs_get_pmap(priv, &pmap)) + return sprintf(buf, "<unknown>\n"); + + return sprintf(buf, "%s %u\n", brcm_avs_mode_to_string(pmap.mode), + pmap.mode); +} + +static ssize_t show_brcm_avs_pmap(struct cpufreq_policy *policy, char *buf) +{ + unsigned int mdiv_p0, mdiv_p1, mdiv_p2, mdiv_p3, mdiv_p4; + struct private_data *priv = policy->driver_data; + unsigned int ndiv, pdiv; + struct pmap pmap; + + if (brcm_avs_get_pmap(priv, &pmap)) + return sprintf(buf, "<unknown>\n"); + + brcm_avs_parse_p1(pmap.p1, &mdiv_p0, &pdiv, &ndiv); + brcm_avs_parse_p2(pmap.p2, &mdiv_p1, &mdiv_p2, &mdiv_p3, &mdiv_p4); + + return sprintf(buf, "0x%08x 0x%08x %u %u %u %u %u %u %u %u %u\n", + pmap.p1, pmap.p2, ndiv, pdiv, mdiv_p0, mdiv_p1, mdiv_p2, + mdiv_p3, mdiv_p4, pmap.mode, pmap.state); +} + +static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + + return sprintf(buf, "0x%08x\n", brcm_avs_get_voltage(priv->base)); +} + +static ssize_t show_brcm_avs_frequency(struct cpufreq_policy *policy, char *buf) +{ + struct private_data *priv = policy->driver_data; + + return sprintf(buf, "0x%08x\n", brcm_avs_get_frequency(priv->base)); +} + +cpufreq_freq_attr_ro(brcm_avs_pstate); +cpufreq_freq_attr_ro(brcm_avs_mode); +cpufreq_freq_attr_ro(brcm_avs_pmap); +cpufreq_freq_attr_ro(brcm_avs_voltage); +cpufreq_freq_attr_ro(brcm_avs_frequency); + +static struct freq_attr *brcm_avs_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &brcm_avs_pstate, + &brcm_avs_mode, + &brcm_avs_pmap, + &brcm_avs_voltage, + &brcm_avs_frequency, + NULL +}; + +static struct cpufreq_driver brcm_avs_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = brcm_avs_target_index, + .get = brcm_avs_cpufreq_get, + .suspend = brcm_avs_suspend, + .resume = brcm_avs_resume, + .init = brcm_avs_cpufreq_init, + .attr = brcm_avs_cpufreq_attr, + .name = BRCM_AVS_CPUFREQ_PREFIX, +}; + +static int brcm_avs_cpufreq_probe(struct platform_device *pdev) +{ + int ret; + + ret = brcm_avs_prepare_init(pdev); + if (ret) + return ret; + + brcm_avs_driver.driver_data = pdev; + + ret = cpufreq_register_driver(&brcm_avs_driver); + if (ret) + brcm_avs_prepare_uninit(pdev); + + return ret; +} + +static int brcm_avs_cpufreq_remove(struct platform_device *pdev) +{ + int ret; + + ret = cpufreq_unregister_driver(&brcm_avs_driver); + WARN_ON(ret); + + brcm_avs_prepare_uninit(pdev); + + return 0; +} + +static const struct of_device_id brcm_avs_cpufreq_match[] = { + { .compatible = BRCM_AVS_CPU_DATA }, + { } +}; +MODULE_DEVICE_TABLE(of, brcm_avs_cpufreq_match); + +static struct platform_driver brcm_avs_cpufreq_platdrv = { + .driver = { + .name = BRCM_AVS_CPUFREQ_NAME, + .of_match_table = brcm_avs_cpufreq_match, + }, + .probe = brcm_avs_cpufreq_probe, + .remove = brcm_avs_cpufreq_remove, +}; +module_platform_driver(brcm_avs_cpufreq_platdrv); + +MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>"); +MODULE_DESCRIPTION("CPUfreq driver for Broadcom STB AVS"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c new file mode 100644 index 000000000..022e35554 --- /dev/null +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -0,0 +1,1014 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CPPC (Collaborative Processor Performance Control) driver for + * interfacing with the CPUfreq layer and governors. See + * cppc_acpi.c for CPPC specific methods. + * + * (C) Copyright 2014, 2015 Linaro Ltd. + * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org> + */ + +#define pr_fmt(fmt) "CPPC Cpufreq:" fmt + +#include <linux/arch_topology.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/dmi.h> +#include <linux/irq_work.h> +#include <linux/kthread.h> +#include <linux/time.h> +#include <linux/vmalloc.h> +#include <uapi/linux/sched/types.h> + +#include <asm/unaligned.h> + +#include <acpi/cppc_acpi.h> + +/* Minimum struct length needed for the DMI processor entry we want */ +#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48 + +/* Offset in the DMI processor structure for the max frequency */ +#define DMI_PROCESSOR_MAX_SPEED 0x14 + +/* + * This list contains information parsed from per CPU ACPI _CPC and _PSD + * structures: e.g. the highest and lowest supported performance, capabilities, + * desired performance, level requested etc. Depending on the share_type, not + * all CPUs will have an entry in the list. + */ +static LIST_HEAD(cpu_data_list); + +static bool boost_supported; + +struct cppc_workaround_oem_info { + char oem_id[ACPI_OEM_ID_SIZE + 1]; + char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1]; + u32 oem_revision; +}; + +static struct cppc_workaround_oem_info wa_info[] = { + { + .oem_id = "HISI ", + .oem_table_id = "HIP07 ", + .oem_revision = 0, + }, { + .oem_id = "HISI ", + .oem_table_id = "HIP08 ", + .oem_revision = 0, + } +}; + +static struct cpufreq_driver cppc_cpufreq_driver; + +static enum { + FIE_UNSET = -1, + FIE_ENABLED, + FIE_DISABLED +} fie_disabled = FIE_UNSET; + +#ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE +module_param(fie_disabled, int, 0444); +MODULE_PARM_DESC(fie_disabled, "Disable Frequency Invariance Engine (FIE)"); + +/* Frequency invariance support */ +struct cppc_freq_invariance { + int cpu; + struct irq_work irq_work; + struct kthread_work work; + struct cppc_perf_fb_ctrs prev_perf_fb_ctrs; + struct cppc_cpudata *cpu_data; +}; + +static DEFINE_PER_CPU(struct cppc_freq_invariance, cppc_freq_inv); +static struct kthread_worker *kworker_fie; + +static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu); +static int cppc_perf_from_fbctrs(struct cppc_cpudata *cpu_data, + struct cppc_perf_fb_ctrs *fb_ctrs_t0, + struct cppc_perf_fb_ctrs *fb_ctrs_t1); + +/** + * cppc_scale_freq_workfn - CPPC arch_freq_scale updater for frequency invariance + * @work: The work item. + * + * The CPPC driver register itself with the topology core to provide its own + * implementation (cppc_scale_freq_tick()) of topology_scale_freq_tick() which + * gets called by the scheduler on every tick. + * + * Note that the arch specific counters have higher priority than CPPC counters, + * if available, though the CPPC driver doesn't need to have any special + * handling for that. + * + * On an invocation of cppc_scale_freq_tick(), we schedule an irq work (since we + * reach here from hard-irq context), which then schedules a normal work item + * and cppc_scale_freq_workfn() updates the per_cpu arch_freq_scale variable + * based on the counter updates since the last tick. + */ +static void cppc_scale_freq_workfn(struct kthread_work *work) +{ + struct cppc_freq_invariance *cppc_fi; + struct cppc_perf_fb_ctrs fb_ctrs = {0}; + struct cppc_cpudata *cpu_data; + unsigned long local_freq_scale; + u64 perf; + + cppc_fi = container_of(work, struct cppc_freq_invariance, work); + cpu_data = cppc_fi->cpu_data; + + if (cppc_get_perf_ctrs(cppc_fi->cpu, &fb_ctrs)) { + pr_warn("%s: failed to read perf counters\n", __func__); + return; + } + + perf = cppc_perf_from_fbctrs(cpu_data, &cppc_fi->prev_perf_fb_ctrs, + &fb_ctrs); + cppc_fi->prev_perf_fb_ctrs = fb_ctrs; + + perf <<= SCHED_CAPACITY_SHIFT; + local_freq_scale = div64_u64(perf, cpu_data->perf_caps.highest_perf); + + /* This can happen due to counter's overflow */ + if (unlikely(local_freq_scale > 1024)) + local_freq_scale = 1024; + + per_cpu(arch_freq_scale, cppc_fi->cpu) = local_freq_scale; +} + +static void cppc_irq_work(struct irq_work *irq_work) +{ + struct cppc_freq_invariance *cppc_fi; + + cppc_fi = container_of(irq_work, struct cppc_freq_invariance, irq_work); + kthread_queue_work(kworker_fie, &cppc_fi->work); +} + +static void cppc_scale_freq_tick(void) +{ + struct cppc_freq_invariance *cppc_fi = &per_cpu(cppc_freq_inv, smp_processor_id()); + + /* + * cppc_get_perf_ctrs() can potentially sleep, call that from the right + * context. + */ + irq_work_queue(&cppc_fi->irq_work); +} + +static struct scale_freq_data cppc_sftd = { + .source = SCALE_FREQ_SOURCE_CPPC, + .set_freq_scale = cppc_scale_freq_tick, +}; + +static void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy) +{ + struct cppc_freq_invariance *cppc_fi; + int cpu, ret; + + if (fie_disabled) + return; + + for_each_cpu(cpu, policy->cpus) { + cppc_fi = &per_cpu(cppc_freq_inv, cpu); + cppc_fi->cpu = cpu; + cppc_fi->cpu_data = policy->driver_data; + kthread_init_work(&cppc_fi->work, cppc_scale_freq_workfn); + init_irq_work(&cppc_fi->irq_work, cppc_irq_work); + + ret = cppc_get_perf_ctrs(cpu, &cppc_fi->prev_perf_fb_ctrs); + if (ret) { + pr_warn("%s: failed to read perf counters for cpu:%d: %d\n", + __func__, cpu, ret); + + /* + * Don't abort if the CPU was offline while the driver + * was getting registered. + */ + if (cpu_online(cpu)) + return; + } + } + + /* Register for freq-invariance */ + topology_set_scale_freq_source(&cppc_sftd, policy->cpus); +} + +/* + * We free all the resources on policy's removal and not on CPU removal as the + * irq-work are per-cpu and the hotplug core takes care of flushing the pending + * irq-works (hint: smpcfd_dying_cpu()) on CPU hotplug. Even if the kthread-work + * fires on another CPU after the concerned CPU is removed, it won't harm. + * + * We just need to make sure to remove them all on policy->exit(). + */ +static void cppc_cpufreq_cpu_fie_exit(struct cpufreq_policy *policy) +{ + struct cppc_freq_invariance *cppc_fi; + int cpu; + + if (fie_disabled) + return; + + /* policy->cpus will be empty here, use related_cpus instead */ + topology_clear_scale_freq_source(SCALE_FREQ_SOURCE_CPPC, policy->related_cpus); + + for_each_cpu(cpu, policy->related_cpus) { + cppc_fi = &per_cpu(cppc_freq_inv, cpu); + irq_work_sync(&cppc_fi->irq_work); + kthread_cancel_work_sync(&cppc_fi->work); + } +} + +static void __init cppc_freq_invariance_init(void) +{ + struct sched_attr attr = { + .size = sizeof(struct sched_attr), + .sched_policy = SCHED_DEADLINE, + .sched_nice = 0, + .sched_priority = 0, + /* + * Fake (unused) bandwidth; workaround to "fix" + * priority inheritance. + */ + .sched_runtime = 1000000, + .sched_deadline = 10000000, + .sched_period = 10000000, + }; + int ret; + + if (fie_disabled != FIE_ENABLED && fie_disabled != FIE_DISABLED) { + fie_disabled = FIE_ENABLED; + if (cppc_perf_ctrs_in_pcc()) { + pr_info("FIE not enabled on systems with registers in PCC\n"); + fie_disabled = FIE_DISABLED; + } + } + + if (fie_disabled) + return; + + kworker_fie = kthread_create_worker(0, "cppc_fie"); + if (IS_ERR(kworker_fie)) + return; + + ret = sched_setattr_nocheck(kworker_fie->task, &attr); + if (ret) { + pr_warn("%s: failed to set SCHED_DEADLINE: %d\n", __func__, + ret); + kthread_destroy_worker(kworker_fie); + return; + } +} + +static void cppc_freq_invariance_exit(void) +{ + if (fie_disabled) + return; + + kthread_destroy_worker(kworker_fie); + kworker_fie = NULL; +} + +#else +static inline void cppc_cpufreq_cpu_fie_init(struct cpufreq_policy *policy) +{ +} + +static inline void cppc_cpufreq_cpu_fie_exit(struct cpufreq_policy *policy) +{ +} + +static inline void cppc_freq_invariance_init(void) +{ +} + +static inline void cppc_freq_invariance_exit(void) +{ +} +#endif /* CONFIG_ACPI_CPPC_CPUFREQ_FIE */ + +/* Callback function used to retrieve the max frequency from DMI */ +static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private) +{ + const u8 *dmi_data = (const u8 *)dm; + u16 *mhz = (u16 *)private; + + if (dm->type == DMI_ENTRY_PROCESSOR && + dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) { + u16 val = (u16)get_unaligned((const u16 *) + (dmi_data + DMI_PROCESSOR_MAX_SPEED)); + *mhz = val > *mhz ? val : *mhz; + } +} + +/* Look up the max frequency in DMI */ +static u64 cppc_get_dmi_max_khz(void) +{ + u16 mhz = 0; + + dmi_walk(cppc_find_dmi_mhz, &mhz); + + /* + * Real stupid fallback value, just in case there is no + * actual value set. + */ + mhz = mhz ? mhz : 1; + + return (1000 * mhz); +} + +/* + * If CPPC lowest_freq and nominal_freq registers are exposed then we can + * use them to convert perf to freq and vice versa. The conversion is + * extrapolated as an affine function passing by the 2 points: + * - (Low perf, Low freq) + * - (Nominal perf, Nominal perf) + */ +static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data, + unsigned int perf) +{ + struct cppc_perf_caps *caps = &cpu_data->perf_caps; + s64 retval, offset = 0; + static u64 max_khz; + u64 mul, div; + + if (caps->lowest_freq && caps->nominal_freq) { + mul = caps->nominal_freq - caps->lowest_freq; + div = caps->nominal_perf - caps->lowest_perf; + offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div); + } else { + if (!max_khz) + max_khz = cppc_get_dmi_max_khz(); + mul = max_khz; + div = caps->highest_perf; + } + + retval = offset + div64_u64(perf * mul, div); + if (retval >= 0) + return retval; + return 0; +} + +static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data, + unsigned int freq) +{ + struct cppc_perf_caps *caps = &cpu_data->perf_caps; + s64 retval, offset = 0; + static u64 max_khz; + u64 mul, div; + + if (caps->lowest_freq && caps->nominal_freq) { + mul = caps->nominal_perf - caps->lowest_perf; + div = caps->nominal_freq - caps->lowest_freq; + offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div); + } else { + if (!max_khz) + max_khz = cppc_get_dmi_max_khz(); + mul = caps->highest_perf; + div = max_khz; + } + + retval = offset + div64_u64(freq * mul, div); + if (retval >= 0) + return retval; + return 0; +} + +static int cppc_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) + +{ + struct cppc_cpudata *cpu_data = policy->driver_data; + unsigned int cpu = policy->cpu; + struct cpufreq_freqs freqs; + u32 desired_perf; + int ret = 0; + + desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq); + /* Return if it is exactly the same perf */ + if (desired_perf == cpu_data->perf_ctrls.desired_perf) + return ret; + + cpu_data->perf_ctrls.desired_perf = desired_perf; + freqs.old = policy->cur; + freqs.new = target_freq; + + cpufreq_freq_transition_begin(policy, &freqs); + ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); + cpufreq_freq_transition_end(policy, &freqs, ret != 0); + + if (ret) + pr_debug("Failed to set target on CPU:%d. ret:%d\n", + cpu, ret); + + return ret; +} + +static unsigned int cppc_cpufreq_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct cppc_cpudata *cpu_data = policy->driver_data; + unsigned int cpu = policy->cpu; + u32 desired_perf; + int ret; + + desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq); + cpu_data->perf_ctrls.desired_perf = desired_perf; + ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); + + if (ret) { + pr_debug("Failed to set target on CPU:%d. ret:%d\n", + cpu, ret); + return 0; + } + + return target_freq; +} + +static int cppc_verify_policy(struct cpufreq_policy_data *policy) +{ + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +/* + * The PCC subspace describes the rate at which platform can accept commands + * on the shared PCC channel (including READs which do not count towards freq + * transition requests), so ideally we need to use the PCC values as a fallback + * if we don't have a platform specific transition_delay_us + */ +#ifdef CONFIG_ARM64 +#include <asm/cputype.h> + +static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu) +{ + unsigned long implementor = read_cpuid_implementor(); + unsigned long part_num = read_cpuid_part_number(); + + switch (implementor) { + case ARM_CPU_IMP_QCOM: + switch (part_num) { + case QCOM_CPU_PART_FALKOR_V1: + case QCOM_CPU_PART_FALKOR: + return 10000; + } + } + return cppc_get_transition_latency(cpu) / NSEC_PER_USEC; +} +#else +static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu) +{ + return cppc_get_transition_latency(cpu) / NSEC_PER_USEC; +} +#endif + +#if defined(CONFIG_ARM64) && defined(CONFIG_ENERGY_MODEL) + +static DEFINE_PER_CPU(unsigned int, efficiency_class); +static void cppc_cpufreq_register_em(struct cpufreq_policy *policy); + +/* Create an artificial performance state every CPPC_EM_CAP_STEP capacity unit. */ +#define CPPC_EM_CAP_STEP (20) +/* Increase the cost value by CPPC_EM_COST_STEP every performance state. */ +#define CPPC_EM_COST_STEP (1) +/* Add a cost gap correspnding to the energy of 4 CPUs. */ +#define CPPC_EM_COST_GAP (4 * SCHED_CAPACITY_SCALE * CPPC_EM_COST_STEP \ + / CPPC_EM_CAP_STEP) + +static unsigned int get_perf_level_count(struct cpufreq_policy *policy) +{ + struct cppc_perf_caps *perf_caps; + unsigned int min_cap, max_cap; + struct cppc_cpudata *cpu_data; + int cpu = policy->cpu; + + cpu_data = policy->driver_data; + perf_caps = &cpu_data->perf_caps; + max_cap = arch_scale_cpu_capacity(cpu); + min_cap = div_u64((u64)max_cap * perf_caps->lowest_perf, + perf_caps->highest_perf); + if ((min_cap == 0) || (max_cap < min_cap)) + return 0; + return 1 + max_cap / CPPC_EM_CAP_STEP - min_cap / CPPC_EM_CAP_STEP; +} + +/* + * The cost is defined as: + * cost = power * max_frequency / frequency + */ +static inline unsigned long compute_cost(int cpu, int step) +{ + return CPPC_EM_COST_GAP * per_cpu(efficiency_class, cpu) + + step * CPPC_EM_COST_STEP; +} + +static int cppc_get_cpu_power(struct device *cpu_dev, + unsigned long *power, unsigned long *KHz) +{ + unsigned long perf_step, perf_prev, perf, perf_check; + unsigned int min_step, max_step, step, step_check; + unsigned long prev_freq = *KHz; + unsigned int min_cap, max_cap; + struct cpufreq_policy *policy; + + struct cppc_perf_caps *perf_caps; + struct cppc_cpudata *cpu_data; + + policy = cpufreq_cpu_get_raw(cpu_dev->id); + cpu_data = policy->driver_data; + perf_caps = &cpu_data->perf_caps; + max_cap = arch_scale_cpu_capacity(cpu_dev->id); + min_cap = div_u64((u64)max_cap * perf_caps->lowest_perf, + perf_caps->highest_perf); + perf_step = div_u64((u64)CPPC_EM_CAP_STEP * perf_caps->highest_perf, + max_cap); + min_step = min_cap / CPPC_EM_CAP_STEP; + max_step = max_cap / CPPC_EM_CAP_STEP; + + perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, *KHz); + step = perf_prev / perf_step; + + if (step > max_step) + return -EINVAL; + + if (min_step == max_step) { + step = max_step; + perf = perf_caps->highest_perf; + } else if (step < min_step) { + step = min_step; + perf = perf_caps->lowest_perf; + } else { + step++; + if (step == max_step) + perf = perf_caps->highest_perf; + else + perf = step * perf_step; + } + + *KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf); + perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz); + step_check = perf_check / perf_step; + + /* + * To avoid bad integer approximation, check that new frequency value + * increased and that the new frequency will be converted to the + * desired step value. + */ + while ((*KHz == prev_freq) || (step_check != step)) { + perf++; + *KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf); + perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz); + step_check = perf_check / perf_step; + } + + /* + * With an artificial EM, only the cost value is used. Still the power + * is populated such as 0 < power < EM_MAX_POWER. This allows to add + * more sense to the artificial performance states. + */ + *power = compute_cost(cpu_dev->id, step); + + return 0; +} + +static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz, + unsigned long *cost) +{ + unsigned long perf_step, perf_prev; + struct cppc_perf_caps *perf_caps; + struct cpufreq_policy *policy; + struct cppc_cpudata *cpu_data; + unsigned int max_cap; + int step; + + policy = cpufreq_cpu_get_raw(cpu_dev->id); + cpu_data = policy->driver_data; + perf_caps = &cpu_data->perf_caps; + max_cap = arch_scale_cpu_capacity(cpu_dev->id); + + perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, KHz); + perf_step = CPPC_EM_CAP_STEP * perf_caps->highest_perf / max_cap; + step = perf_prev / perf_step; + + *cost = compute_cost(cpu_dev->id, step); + + return 0; +} + +static int populate_efficiency_class(void) +{ + struct acpi_madt_generic_interrupt *gicc; + DECLARE_BITMAP(used_classes, 256) = {}; + int class, cpu, index; + + for_each_possible_cpu(cpu) { + gicc = acpi_cpu_get_madt_gicc(cpu); + class = gicc->efficiency_class; + bitmap_set(used_classes, class, 1); + } + + if (bitmap_weight(used_classes, 256) <= 1) { + pr_debug("Efficiency classes are all equal (=%d). " + "No EM registered", class); + return -EINVAL; + } + + /* + * Squeeze efficiency class values on [0:#efficiency_class-1]. + * Values are per spec in [0:255]. + */ + index = 0; + for_each_set_bit(class, used_classes, 256) { + for_each_possible_cpu(cpu) { + gicc = acpi_cpu_get_madt_gicc(cpu); + if (gicc->efficiency_class == class) + per_cpu(efficiency_class, cpu) = index; + } + index++; + } + cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em; + + return 0; +} + +static void cppc_cpufreq_register_em(struct cpufreq_policy *policy) +{ + struct cppc_cpudata *cpu_data; + struct em_data_callback em_cb = + EM_ADV_DATA_CB(cppc_get_cpu_power, cppc_get_cpu_cost); + + cpu_data = policy->driver_data; + em_dev_register_perf_domain(get_cpu_device(policy->cpu), + get_perf_level_count(policy), &em_cb, + cpu_data->shared_cpu_map, 0); +} + +#else +static int populate_efficiency_class(void) +{ + return 0; +} +#endif + +static struct cppc_cpudata *cppc_cpufreq_get_cpu_data(unsigned int cpu) +{ + struct cppc_cpudata *cpu_data; + int ret; + + cpu_data = kzalloc(sizeof(struct cppc_cpudata), GFP_KERNEL); + if (!cpu_data) + goto out; + + if (!zalloc_cpumask_var(&cpu_data->shared_cpu_map, GFP_KERNEL)) + goto free_cpu; + + ret = acpi_get_psd_map(cpu, cpu_data); + if (ret) { + pr_debug("Err parsing CPU%d PSD data: ret:%d\n", cpu, ret); + goto free_mask; + } + + ret = cppc_get_perf_caps(cpu, &cpu_data->perf_caps); + if (ret) { + pr_debug("Err reading CPU%d perf caps: ret:%d\n", cpu, ret); + goto free_mask; + } + + /* Convert the lowest and nominal freq from MHz to KHz */ + cpu_data->perf_caps.lowest_freq *= 1000; + cpu_data->perf_caps.nominal_freq *= 1000; + + list_add(&cpu_data->node, &cpu_data_list); + + return cpu_data; + +free_mask: + free_cpumask_var(cpu_data->shared_cpu_map); +free_cpu: + kfree(cpu_data); +out: + return NULL; +} + +static void cppc_cpufreq_put_cpu_data(struct cpufreq_policy *policy) +{ + struct cppc_cpudata *cpu_data = policy->driver_data; + + list_del(&cpu_data->node); + free_cpumask_var(cpu_data->shared_cpu_map); + kfree(cpu_data); + policy->driver_data = NULL; +} + +static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct cppc_cpudata *cpu_data; + struct cppc_perf_caps *caps; + int ret; + + cpu_data = cppc_cpufreq_get_cpu_data(cpu); + if (!cpu_data) { + pr_err("Error in acquiring _CPC/_PSD data for CPU%d.\n", cpu); + return -ENODEV; + } + caps = &cpu_data->perf_caps; + policy->driver_data = cpu_data; + + /* + * Set min to lowest nonlinear perf to avoid any efficiency penalty (see + * Section 8.4.7.1.1.5 of ACPI 6.1 spec) + */ + policy->min = cppc_cpufreq_perf_to_khz(cpu_data, + caps->lowest_nonlinear_perf); + policy->max = cppc_cpufreq_perf_to_khz(cpu_data, + caps->nominal_perf); + + /* + * Set cpuinfo.min_freq to Lowest to make the full range of performance + * available if userspace wants to use any perf between lowest & lowest + * nonlinear perf + */ + policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data, + caps->lowest_perf); + policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data, + caps->nominal_perf); + + policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu); + policy->shared_type = cpu_data->shared_type; + + switch (policy->shared_type) { + case CPUFREQ_SHARED_TYPE_HW: + case CPUFREQ_SHARED_TYPE_NONE: + /* Nothing to be done - we'll have a policy for each CPU */ + break; + case CPUFREQ_SHARED_TYPE_ANY: + /* + * All CPUs in the domain will share a policy and all cpufreq + * operations will use a single cppc_cpudata structure stored + * in policy->driver_data. + */ + cpumask_copy(policy->cpus, cpu_data->shared_cpu_map); + break; + default: + pr_debug("Unsupported CPU co-ord type: %d\n", + policy->shared_type); + ret = -EFAULT; + goto out; + } + + policy->fast_switch_possible = cppc_allow_fast_switch(); + policy->dvfs_possible_from_any_cpu = true; + + /* + * If 'highest_perf' is greater than 'nominal_perf', we assume CPU Boost + * is supported. + */ + if (caps->highest_perf > caps->nominal_perf) + boost_supported = true; + + /* Set policy->cur to max now. The governors will adjust later. */ + policy->cur = cppc_cpufreq_perf_to_khz(cpu_data, caps->highest_perf); + cpu_data->perf_ctrls.desired_perf = caps->highest_perf; + + ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); + if (ret) { + pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", + caps->highest_perf, cpu, ret); + goto out; + } + + cppc_cpufreq_cpu_fie_init(policy); + return 0; + +out: + cppc_cpufreq_put_cpu_data(policy); + return ret; +} + +static int cppc_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct cppc_cpudata *cpu_data = policy->driver_data; + struct cppc_perf_caps *caps = &cpu_data->perf_caps; + unsigned int cpu = policy->cpu; + int ret; + + cppc_cpufreq_cpu_fie_exit(policy); + + cpu_data->perf_ctrls.desired_perf = caps->lowest_perf; + + ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); + if (ret) + pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", + caps->lowest_perf, cpu, ret); + + cppc_cpufreq_put_cpu_data(policy); + return 0; +} + +static inline u64 get_delta(u64 t1, u64 t0) +{ + if (t1 > t0 || t0 > ~(u32)0) + return t1 - t0; + + return (u32)t1 - (u32)t0; +} + +static int cppc_perf_from_fbctrs(struct cppc_cpudata *cpu_data, + struct cppc_perf_fb_ctrs *fb_ctrs_t0, + struct cppc_perf_fb_ctrs *fb_ctrs_t1) +{ + u64 delta_reference, delta_delivered; + u64 reference_perf; + + reference_perf = fb_ctrs_t0->reference_perf; + + delta_reference = get_delta(fb_ctrs_t1->reference, + fb_ctrs_t0->reference); + delta_delivered = get_delta(fb_ctrs_t1->delivered, + fb_ctrs_t0->delivered); + + /* Check to avoid divide-by zero and invalid delivered_perf */ + if (!delta_reference || !delta_delivered) + return cpu_data->perf_ctrls.desired_perf; + + return (reference_perf * delta_delivered) / delta_reference; +} + +static unsigned int cppc_cpufreq_get_rate(unsigned int cpu) +{ + struct cppc_perf_fb_ctrs fb_ctrs_t0 = {0}, fb_ctrs_t1 = {0}; + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct cppc_cpudata *cpu_data = policy->driver_data; + u64 delivered_perf; + int ret; + + cpufreq_cpu_put(policy); + + ret = cppc_get_perf_ctrs(cpu, &fb_ctrs_t0); + if (ret) + return ret; + + udelay(2); /* 2usec delay between sampling */ + + ret = cppc_get_perf_ctrs(cpu, &fb_ctrs_t1); + if (ret) + return ret; + + delivered_perf = cppc_perf_from_fbctrs(cpu_data, &fb_ctrs_t0, + &fb_ctrs_t1); + + return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf); +} + +static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state) +{ + struct cppc_cpudata *cpu_data = policy->driver_data; + struct cppc_perf_caps *caps = &cpu_data->perf_caps; + int ret; + + if (!boost_supported) { + pr_err("BOOST not supported by CPU or firmware\n"); + return -EINVAL; + } + + if (state) + policy->max = cppc_cpufreq_perf_to_khz(cpu_data, + caps->highest_perf); + else + policy->max = cppc_cpufreq_perf_to_khz(cpu_data, + caps->nominal_perf); + policy->cpuinfo.max_freq = policy->max; + + ret = freq_qos_update_request(policy->max_freq_req, policy->max); + if (ret < 0) + return ret; + + return 0; +} + +static ssize_t show_freqdomain_cpus(struct cpufreq_policy *policy, char *buf) +{ + struct cppc_cpudata *cpu_data = policy->driver_data; + + return cpufreq_show_cpus(cpu_data->shared_cpu_map, buf); +} +cpufreq_freq_attr_ro(freqdomain_cpus); + +static struct freq_attr *cppc_cpufreq_attr[] = { + &freqdomain_cpus, + NULL, +}; + +static struct cpufreq_driver cppc_cpufreq_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = cppc_verify_policy, + .target = cppc_cpufreq_set_target, + .get = cppc_cpufreq_get_rate, + .fast_switch = cppc_cpufreq_fast_switch, + .init = cppc_cpufreq_cpu_init, + .exit = cppc_cpufreq_cpu_exit, + .set_boost = cppc_cpufreq_set_boost, + .attr = cppc_cpufreq_attr, + .name = "cppc_cpufreq", +}; + +/* + * HISI platform does not support delivered performance counter and + * reference performance counter. It can calculate the performance using the + * platform specific mechanism. We reuse the desired performance register to + * store the real performance calculated by the platform. + */ +static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + struct cppc_cpudata *cpu_data = policy->driver_data; + u64 desired_perf; + int ret; + + cpufreq_cpu_put(policy); + + ret = cppc_get_desired_perf(cpu, &desired_perf); + if (ret < 0) + return -EIO; + + return cppc_cpufreq_perf_to_khz(cpu_data, desired_perf); +} + +static void cppc_check_hisi_workaround(void) +{ + struct acpi_table_header *tbl; + acpi_status status = AE_OK; + int i; + + status = acpi_get_table(ACPI_SIG_PCCT, 0, &tbl); + if (ACPI_FAILURE(status) || !tbl) + return; + + for (i = 0; i < ARRAY_SIZE(wa_info); i++) { + if (!memcmp(wa_info[i].oem_id, tbl->oem_id, ACPI_OEM_ID_SIZE) && + !memcmp(wa_info[i].oem_table_id, tbl->oem_table_id, ACPI_OEM_TABLE_ID_SIZE) && + wa_info[i].oem_revision == tbl->oem_revision) { + /* Overwrite the get() callback */ + cppc_cpufreq_driver.get = hisi_cppc_cpufreq_get_rate; + fie_disabled = FIE_DISABLED; + break; + } + } + + acpi_put_table(tbl); +} + +static int __init cppc_cpufreq_init(void) +{ + int ret; + + if (!acpi_cpc_valid()) + return -ENODEV; + + cppc_check_hisi_workaround(); + cppc_freq_invariance_init(); + populate_efficiency_class(); + + ret = cpufreq_register_driver(&cppc_cpufreq_driver); + if (ret) + cppc_freq_invariance_exit(); + + return ret; +} + +static inline void free_cpu_data(void) +{ + struct cppc_cpudata *iter, *tmp; + + list_for_each_entry_safe(iter, tmp, &cpu_data_list, node) { + free_cpumask_var(iter->shared_cpu_map); + list_del(&iter->node); + kfree(iter); + } + +} + +static void __exit cppc_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&cppc_cpufreq_driver); + cppc_freq_invariance_exit(); + + free_cpu_data(); +} + +module_exit(cppc_cpufreq_exit); +MODULE_AUTHOR("Ashwin Chaugule"); +MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec"); +MODULE_LICENSE("GPL"); + +late_initcall(cppc_cpufreq_init); + +static const struct acpi_device_id cppc_acpi_ids[] __used = { + {ACPI_PROCESSOR_DEVICE_HID, }, + {} +}; + +MODULE_DEVICE_TABLE(acpi, cppc_acpi_ids); diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c new file mode 100644 index 000000000..8514bb62d --- /dev/null +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + */ + +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include "cpufreq-dt.h" + +/* + * Machines for which the cpufreq device is *always* created, mostly used for + * platforms using "operating-points" (V1) property. + */ +static const struct of_device_id allowlist[] __initconst = { + { .compatible = "allwinner,sun4i-a10", }, + { .compatible = "allwinner,sun5i-a10s", }, + { .compatible = "allwinner,sun5i-a13", }, + { .compatible = "allwinner,sun5i-r8", }, + { .compatible = "allwinner,sun6i-a31", }, + { .compatible = "allwinner,sun6i-a31s", }, + { .compatible = "allwinner,sun7i-a20", }, + { .compatible = "allwinner,sun8i-a23", }, + { .compatible = "allwinner,sun8i-a83t", }, + { .compatible = "allwinner,sun8i-h3", }, + + { .compatible = "apm,xgene-shadowcat", }, + + { .compatible = "arm,integrator-ap", }, + { .compatible = "arm,integrator-cp", }, + + { .compatible = "hisilicon,hi3660", }, + + { .compatible = "fsl,imx27", }, + { .compatible = "fsl,imx51", }, + { .compatible = "fsl,imx53", }, + + { .compatible = "marvell,berlin", }, + { .compatible = "marvell,pxa250", }, + { .compatible = "marvell,pxa270", }, + + { .compatible = "samsung,exynos3250", }, + { .compatible = "samsung,exynos4210", }, + { .compatible = "samsung,exynos5250", }, +#ifndef CONFIG_BL_SWITCHER + { .compatible = "samsung,exynos5800", }, +#endif + + { .compatible = "renesas,emev2", }, + { .compatible = "renesas,r7s72100", }, + { .compatible = "renesas,r8a73a4", }, + { .compatible = "renesas,r8a7740", }, + { .compatible = "renesas,r8a7742", }, + { .compatible = "renesas,r8a7743", }, + { .compatible = "renesas,r8a7744", }, + { .compatible = "renesas,r8a7745", }, + { .compatible = "renesas,r8a7778", }, + { .compatible = "renesas,r8a7779", }, + { .compatible = "renesas,r8a7790", }, + { .compatible = "renesas,r8a7791", }, + { .compatible = "renesas,r8a7792", }, + { .compatible = "renesas,r8a7793", }, + { .compatible = "renesas,r8a7794", }, + { .compatible = "renesas,sh73a0", }, + + { .compatible = "rockchip,rk2928", }, + { .compatible = "rockchip,rk3036", }, + { .compatible = "rockchip,rk3066a", }, + { .compatible = "rockchip,rk3066b", }, + { .compatible = "rockchip,rk3188", }, + { .compatible = "rockchip,rk3228", }, + { .compatible = "rockchip,rk3288", }, + { .compatible = "rockchip,rk3328", }, + { .compatible = "rockchip,rk3366", }, + { .compatible = "rockchip,rk3368", }, + { .compatible = "rockchip,rk3399", + .data = &(struct cpufreq_dt_platform_data) + { .have_governor_per_policy = true, }, + }, + + { .compatible = "st-ericsson,u8500", }, + { .compatible = "st-ericsson,u8540", }, + { .compatible = "st-ericsson,u9500", }, + { .compatible = "st-ericsson,u9540", }, + + { .compatible = "ti,omap2", }, + { .compatible = "ti,omap4", }, + { .compatible = "ti,omap5", }, + + { .compatible = "xlnx,zynq-7000", }, + { .compatible = "xlnx,zynqmp", }, + + { } +}; + +/* + * Machines for which the cpufreq device is *not* created, mostly used for + * platforms using "operating-points-v2" property. + */ +static const struct of_device_id blocklist[] __initconst = { + { .compatible = "allwinner,sun50i-h6", }, + + { .compatible = "arm,vexpress", }, + + { .compatible = "calxeda,highbank", }, + { .compatible = "calxeda,ecx-2000", }, + + { .compatible = "fsl,imx7ulp", }, + { .compatible = "fsl,imx7d", }, + { .compatible = "fsl,imx7s", }, + { .compatible = "fsl,imx8mq", }, + { .compatible = "fsl,imx8mm", }, + { .compatible = "fsl,imx8mn", }, + { .compatible = "fsl,imx8mp", }, + + { .compatible = "marvell,armadaxp", }, + + { .compatible = "mediatek,mt2701", }, + { .compatible = "mediatek,mt2712", }, + { .compatible = "mediatek,mt7622", }, + { .compatible = "mediatek,mt7623", }, + { .compatible = "mediatek,mt8167", }, + { .compatible = "mediatek,mt817x", }, + { .compatible = "mediatek,mt8173", }, + { .compatible = "mediatek,mt8176", }, + { .compatible = "mediatek,mt8183", }, + { .compatible = "mediatek,mt8186", }, + { .compatible = "mediatek,mt8365", }, + { .compatible = "mediatek,mt8516", }, + + { .compatible = "nvidia,tegra20", }, + { .compatible = "nvidia,tegra30", }, + { .compatible = "nvidia,tegra124", }, + { .compatible = "nvidia,tegra210", }, + { .compatible = "nvidia,tegra234", }, + + { .compatible = "qcom,apq8096", }, + { .compatible = "qcom,msm8996", }, + { .compatible = "qcom,qcs404", }, + { .compatible = "qcom,sa8155p" }, + { .compatible = "qcom,sa8540p" }, + { .compatible = "qcom,sc7180", }, + { .compatible = "qcom,sc7280", }, + { .compatible = "qcom,sc8180x", }, + { .compatible = "qcom,sc8280xp", }, + { .compatible = "qcom,sdm845", }, + { .compatible = "qcom,sm6115", }, + { .compatible = "qcom,sm6350", }, + { .compatible = "qcom,sm6375", }, + { .compatible = "qcom,sm8150", }, + { .compatible = "qcom,sm8250", }, + { .compatible = "qcom,sm8350", }, + + { .compatible = "st,stih407", }, + { .compatible = "st,stih410", }, + { .compatible = "st,stih418", }, + + { .compatible = "ti,am33xx", }, + { .compatible = "ti,am43", }, + { .compatible = "ti,dra7", }, + { .compatible = "ti,omap3", }, + + { .compatible = "qcom,ipq8064", }, + { .compatible = "qcom,apq8064", }, + { .compatible = "qcom,msm8974", }, + { .compatible = "qcom,msm8960", }, + + { } +}; + +static bool __init cpu0_node_has_opp_v2_prop(void) +{ + struct device_node *np = of_cpu_device_node_get(0); + bool ret = false; + + if (of_property_present(np, "operating-points-v2")) + ret = true; + + of_node_put(np); + return ret; +} + +static int __init cpufreq_dt_platdev_init(void) +{ + struct device_node *np = of_find_node_by_path("/"); + const struct of_device_id *match; + const void *data = NULL; + + if (!np) + return -ENODEV; + + match = of_match_node(allowlist, np); + if (match) { + data = match->data; + goto create_pdev; + } + + if (cpu0_node_has_opp_v2_prop() && !of_match_node(blocklist, np)) + goto create_pdev; + + of_node_put(np); + return -ENODEV; + +create_pdev: + of_node_put(np); + return PTR_ERR_OR_ZERO(platform_device_register_data(NULL, "cpufreq-dt", + -1, data, + sizeof(struct cpufreq_dt_platform_data))); +} +core_initcall(cpufreq_dt_platdev_init); diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c new file mode 100644 index 000000000..4aec4b2a5 --- /dev/null +++ b/drivers/cpufreq/cpufreq-dt.c @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Copyright (C) 2014 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/err.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +#include "cpufreq-dt.h" + +struct private_data { + struct list_head node; + + cpumask_var_t cpus; + struct device *cpu_dev; + struct cpufreq_frequency_table *freq_table; + bool have_static_opps; + int opp_token; +}; + +static LIST_HEAD(priv_list); + +static struct freq_attr *cpufreq_dt_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, /* Extra space for boost-attr if required */ + NULL, +}; + +static struct private_data *cpufreq_dt_find_data(int cpu) +{ + struct private_data *priv; + + list_for_each_entry(priv, &priv_list, node) { + if (cpumask_test_cpu(cpu, priv->cpus)) + return priv; + } + + return NULL; +} + +static int set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct private_data *priv = policy->driver_data; + unsigned long freq = policy->freq_table[index].frequency; + + return dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); +} + +/* + * An earlier version of opp-v1 bindings used to name the regulator + * "cpu0-supply", we still need to handle that for backwards compatibility. + */ +static const char *find_supply_name(struct device *dev) +{ + struct device_node *np; + struct property *pp; + int cpu = dev->id; + const char *name = NULL; + + np = of_node_get(dev->of_node); + + /* This must be valid for sure */ + if (WARN_ON(!np)) + return NULL; + + /* Try "cpu0" for older DTs */ + if (!cpu) { + pp = of_find_property(np, "cpu0-supply", NULL); + if (pp) { + name = "cpu0"; + goto node_put; + } + } + + pp = of_find_property(np, "cpu-supply", NULL); + if (pp) { + name = "cpu"; + goto node_put; + } + + dev_dbg(dev, "no regulator for cpu%d\n", cpu); +node_put: + of_node_put(np); + return name; +} + +static int cpufreq_init(struct cpufreq_policy *policy) +{ + struct private_data *priv; + struct device *cpu_dev; + struct clk *cpu_clk; + unsigned int transition_latency; + int ret; + + priv = cpufreq_dt_find_data(policy->cpu); + if (!priv) { + pr_err("failed to find data for cpu%d\n", policy->cpu); + return -ENODEV; + } + cpu_dev = priv->cpu_dev; + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + ret = PTR_ERR(cpu_clk); + dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret); + return ret; + } + + transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev); + if (!transition_latency) + transition_latency = CPUFREQ_ETERNAL; + + cpumask_copy(policy->cpus, priv->cpus); + policy->driver_data = priv; + policy->clk = cpu_clk; + policy->freq_table = priv->freq_table; + policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; + policy->cpuinfo.transition_latency = transition_latency; + policy->dvfs_possible_from_any_cpu = true; + + /* Support turbo/boost mode */ + if (policy_has_boost_freq(policy)) { + /* This gets disabled by core on driver unregister */ + ret = cpufreq_enable_boost_support(); + if (ret) + goto out_clk_put; + cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs; + } + + return 0; + +out_clk_put: + clk_put(cpu_clk); + + return ret; +} + +static int cpufreq_online(struct cpufreq_policy *policy) +{ + /* We did light-weight tear down earlier, nothing to do here */ + return 0; +} + +static int cpufreq_offline(struct cpufreq_policy *policy) +{ + /* + * Preserve policy->driver_data and don't free resources on light-weight + * tear down. + */ + return 0; +} + +static int cpufreq_exit(struct cpufreq_policy *policy) +{ + clk_put(policy->clk); + return 0; +} + +static struct cpufreq_driver dt_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = set_target, + .get = cpufreq_generic_get, + .init = cpufreq_init, + .exit = cpufreq_exit, + .online = cpufreq_online, + .offline = cpufreq_offline, + .register_em = cpufreq_register_em_with_opp, + .name = "cpufreq-dt", + .attr = cpufreq_dt_attr, + .suspend = cpufreq_generic_suspend, +}; + +static int dt_cpufreq_early_init(struct device *dev, int cpu) +{ + struct private_data *priv; + struct device *cpu_dev; + bool fallback = false; + const char *reg_name[] = { NULL, NULL }; + int ret; + + /* Check if this CPU is already covered by some other policy */ + if (cpufreq_dt_find_data(cpu)) + return 0; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) + return -EPROBE_DEFER; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + if (!alloc_cpumask_var(&priv->cpus, GFP_KERNEL)) + return -ENOMEM; + + cpumask_set_cpu(cpu, priv->cpus); + priv->cpu_dev = cpu_dev; + + /* + * OPP layer will be taking care of regulators now, but it needs to know + * the name of the regulator first. + */ + reg_name[0] = find_supply_name(cpu_dev); + if (reg_name[0]) { + priv->opp_token = dev_pm_opp_set_regulators(cpu_dev, reg_name); + if (priv->opp_token < 0) { + ret = dev_err_probe(cpu_dev, priv->opp_token, + "failed to set regulators\n"); + goto free_cpumask; + } + } + + /* Get OPP-sharing information from "operating-points-v2" bindings */ + ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, priv->cpus); + if (ret) { + if (ret != -ENOENT) + goto out; + + /* + * operating-points-v2 not supported, fallback to all CPUs share + * OPP for backward compatibility if the platform hasn't set + * sharing CPUs. + */ + if (dev_pm_opp_get_sharing_cpus(cpu_dev, priv->cpus)) + fallback = true; + } + + /* + * Initialize OPP tables for all priv->cpus. They will be shared by + * all CPUs which have marked their CPUs shared with OPP bindings. + * + * For platforms not using operating-points-v2 bindings, we do this + * before updating priv->cpus. Otherwise, we will end up creating + * duplicate OPPs for the CPUs. + * + * OPPs might be populated at runtime, don't fail for error here unless + * it is -EPROBE_DEFER. + */ + ret = dev_pm_opp_of_cpumask_add_table(priv->cpus); + if (!ret) { + priv->have_static_opps = true; + } else if (ret == -EPROBE_DEFER) { + goto out; + } + + /* + * The OPP table must be initialized, statically or dynamically, by this + * point. + */ + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_err(cpu_dev, "OPP table can't be empty\n"); + ret = -ENODEV; + goto out; + } + + if (fallback) { + cpumask_setall(priv->cpus); + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, priv->cpus); + if (ret) + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &priv->freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out; + } + + list_add(&priv->node, &priv_list); + return 0; + +out: + if (priv->have_static_opps) + dev_pm_opp_of_cpumask_remove_table(priv->cpus); + dev_pm_opp_put_regulators(priv->opp_token); +free_cpumask: + free_cpumask_var(priv->cpus); + return ret; +} + +static void dt_cpufreq_release(void) +{ + struct private_data *priv, *tmp; + + list_for_each_entry_safe(priv, tmp, &priv_list, node) { + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &priv->freq_table); + if (priv->have_static_opps) + dev_pm_opp_of_cpumask_remove_table(priv->cpus); + dev_pm_opp_put_regulators(priv->opp_token); + free_cpumask_var(priv->cpus); + list_del(&priv->node); + } +} + +static int dt_cpufreq_probe(struct platform_device *pdev) +{ + struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev); + int ret, cpu; + + /* Request resources early so we can return in case of -EPROBE_DEFER */ + for_each_possible_cpu(cpu) { + ret = dt_cpufreq_early_init(&pdev->dev, cpu); + if (ret) + goto err; + } + + if (data) { + if (data->have_governor_per_policy) + dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY; + + dt_cpufreq_driver.resume = data->resume; + if (data->suspend) + dt_cpufreq_driver.suspend = data->suspend; + if (data->get_intermediate) { + dt_cpufreq_driver.target_intermediate = data->target_intermediate; + dt_cpufreq_driver.get_intermediate = data->get_intermediate; + } + } + + ret = cpufreq_register_driver(&dt_cpufreq_driver); + if (ret) { + dev_err(&pdev->dev, "failed register driver: %d\n", ret); + goto err; + } + + return 0; +err: + dt_cpufreq_release(); + return ret; +} + +static int dt_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&dt_cpufreq_driver); + dt_cpufreq_release(); + return 0; +} + +static struct platform_driver dt_cpufreq_platdrv = { + .driver = { + .name = "cpufreq-dt", + }, + .probe = dt_cpufreq_probe, + .remove = dt_cpufreq_remove, +}; +module_platform_driver(dt_cpufreq_platdrv); + +MODULE_ALIAS("platform:cpufreq-dt"); +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Generic cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq-dt.h b/drivers/cpufreq/cpufreq-dt.h new file mode 100644 index 000000000..28c8af7ec --- /dev/null +++ b/drivers/cpufreq/cpufreq-dt.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2016 Linaro + * Viresh Kumar <viresh.kumar@linaro.org> + */ + +#ifndef __CPUFREQ_DT_H__ +#define __CPUFREQ_DT_H__ + +#include <linux/types.h> + +struct cpufreq_policy; + +struct cpufreq_dt_platform_data { + bool have_governor_per_policy; + + unsigned int (*get_intermediate)(struct cpufreq_policy *policy, + unsigned int index); + int (*target_intermediate)(struct cpufreq_policy *policy, + unsigned int index); + int (*suspend)(struct cpufreq_policy *policy); + int (*resume)(struct cpufreq_policy *policy); +}; + +#endif /* __CPUFREQ_DT_H__ */ diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c new file mode 100644 index 000000000..f7a7bcf6f --- /dev/null +++ b/drivers/cpufreq/cpufreq-nforce2.c @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net> + * + * Based upon reverse engineered information + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/delay.h> + +#define NFORCE2_XTAL 25 +#define NFORCE2_BOOTFSB 0x48 +#define NFORCE2_PLLENABLE 0xa8 +#define NFORCE2_PLLREG 0xa4 +#define NFORCE2_PLLADR 0xa0 +#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) + +#define NFORCE2_MIN_FSB 50 +#define NFORCE2_SAFE_DISTANCE 50 + +/* Delay in ms between FSB changes */ +/* #define NFORCE2_DELAY 10 */ + +/* + * nforce2_chipset: + * FSB is changed using the chipset + */ +static struct pci_dev *nforce2_dev; + +/* fid: + * multiplier * 10 + */ +static int fid; + +/* min_fsb, max_fsb: + * minimum and maximum FSB (= FSB at boot time) + */ +static int min_fsb; +static int max_fsb; + +MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); +MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); +MODULE_LICENSE("GPL"); + +module_param(fid, int, 0444); +module_param(min_fsb, int, 0444); + +MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); +MODULE_PARM_DESC(min_fsb, + "Minimum FSB to use, if not defined: current FSB - 50"); + +/** + * nforce2_calc_fsb - calculate FSB + * @pll: PLL value + * + * Calculates FSB from PLL value + */ +static int nforce2_calc_fsb(int pll) +{ + unsigned char mul, div; + + mul = (pll >> 8) & 0xff; + div = pll & 0xff; + + if (div > 0) + return NFORCE2_XTAL * mul / div; + + return 0; +} + +/** + * nforce2_calc_pll - calculate PLL value + * @fsb: FSB + * + * Calculate PLL value for given FSB + */ +static int nforce2_calc_pll(unsigned int fsb) +{ + unsigned char xmul, xdiv; + unsigned char mul = 0, div = 0; + int tried = 0; + + /* Try to calculate multiplier and divider up to 4 times */ + while (((mul == 0) || (div == 0)) && (tried <= 3)) { + for (xdiv = 2; xdiv <= 0x80; xdiv++) + for (xmul = 1; xmul <= 0xfe; xmul++) + if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == + fsb + tried) { + mul = xmul; + div = xdiv; + } + tried++; + } + + if ((mul == 0) || (div == 0)) + return -1; + + return NFORCE2_PLL(mul, div); +} + +/** + * nforce2_write_pll - write PLL value to chipset + * @pll: PLL value + * + * Writes new FSB PLL value to chipset + */ +static void nforce2_write_pll(int pll) +{ + int temp; + + /* Set the pll addr. to 0x00 */ + pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); + + /* Now write the value in all 64 registers */ + for (temp = 0; temp <= 0x3f; temp++) + pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); +} + +/** + * nforce2_fsb_read - Read FSB + * + * Read FSB from chipset + * If bootfsb != 0, return FSB at boot-time + */ +static unsigned int nforce2_fsb_read(int bootfsb) +{ + struct pci_dev *nforce2_sub5; + u32 fsb, temp = 0; + + /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ + nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, + PCI_ANY_ID, PCI_ANY_ID, NULL); + if (!nforce2_sub5) + return 0; + + pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); + fsb /= 1000000; + + /* Check if PLL register is already set */ + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + + if (bootfsb || !temp) + return fsb; + + /* Use PLL register FSB value */ + pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); + fsb = nforce2_calc_fsb(temp); + + return fsb; +} + +/** + * nforce2_set_fsb - set new FSB + * @fsb: New FSB + * + * Sets new FSB + */ +static int nforce2_set_fsb(unsigned int fsb) +{ + u32 temp = 0; + unsigned int tfsb; + int diff; + int pll = 0; + + if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { + pr_err("FSB %d is out of range!\n", fsb); + return -EINVAL; + } + + tfsb = nforce2_fsb_read(0); + if (!tfsb) { + pr_err("Error while reading the FSB\n"); + return -EINVAL; + } + + /* First write? Then set actual value */ + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + if (!temp) { + pll = nforce2_calc_pll(tfsb); + + if (pll < 0) + return -EINVAL; + + nforce2_write_pll(pll); + } + + /* Enable write access */ + temp = 0x01; + pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); + + diff = tfsb - fsb; + + if (!diff) + return 0; + + while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { + if (diff < 0) + tfsb++; + else + tfsb--; + + /* Calculate the PLL reg. value */ + pll = nforce2_calc_pll(tfsb); + if (pll == -1) + return -EINVAL; + + nforce2_write_pll(pll); +#ifdef NFORCE2_DELAY + mdelay(NFORCE2_DELAY); +#endif + } + + temp = 0x40; + pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); + + return 0; +} + +/** + * nforce2_get - get the CPU frequency + * @cpu: CPU number + * + * Returns the CPU frequency + */ +static unsigned int nforce2_get(unsigned int cpu) +{ + if (cpu) + return 0; + return nforce2_fsb_read(0) * fid * 100; +} + +/** + * nforce2_target - set a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * Sets a new CPUFreq policy. + */ +static int nforce2_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ +/* unsigned long flags; */ + struct cpufreq_freqs freqs; + unsigned int target_fsb; + + if ((target_freq > policy->max) || (target_freq < policy->min)) + return -EINVAL; + + target_fsb = target_freq / (fid * 100); + + freqs.old = nforce2_get(policy->cpu); + freqs.new = target_fsb * fid * 100; + + if (freqs.old == freqs.new) + return 0; + + pr_debug("Old CPU frequency %d kHz, new %d kHz\n", + freqs.old, freqs.new); + + cpufreq_freq_transition_begin(policy, &freqs); + + /* Disable IRQs */ + /* local_irq_save(flags); */ + + if (nforce2_set_fsb(target_fsb) < 0) + pr_err("Changing FSB to %d failed\n", target_fsb); + else + pr_debug("Changed FSB successfully to %d\n", + target_fsb); + + /* Enable IRQs */ + /* local_irq_restore(flags); */ + + cpufreq_freq_transition_end(policy, &freqs, 0); + + return 0; +} + +/** + * nforce2_verify - verifies a new CPUFreq policy + * @policy: new policy + */ +static int nforce2_verify(struct cpufreq_policy_data *policy) +{ + unsigned int fsb_pol_max; + + fsb_pol_max = policy->max / (fid * 100); + + if (policy->min < (fsb_pol_max * fid * 100)) + policy->max = (fsb_pol_max + 1) * fid * 100; + + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static int nforce2_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int fsb; + unsigned int rfid; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + /* Get current FSB */ + fsb = nforce2_fsb_read(0); + + if (!fsb) + return -EIO; + + /* FIX: Get FID from CPU */ + if (!fid) { + if (!cpu_khz) { + pr_warn("cpu_khz not set, can't calculate multiplier!\n"); + return -ENODEV; + } + + fid = cpu_khz / (fsb * 100); + rfid = fid % 5; + + if (rfid) { + if (rfid > 2) + fid += 5 - rfid; + else + fid -= rfid; + } + } + + pr_info("FSB currently at %i MHz, FID %d.%d\n", + fsb, fid / 10, fid % 10); + + /* Set maximum FSB to FSB at boot time */ + max_fsb = nforce2_fsb_read(1); + + if (!max_fsb) + return -EIO; + + if (!min_fsb) + min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; + + if (min_fsb < NFORCE2_MIN_FSB) + min_fsb = NFORCE2_MIN_FSB; + + /* cpuinfo and default policy values */ + policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100; + policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100; + + return 0; +} + +static int nforce2_cpu_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver nforce2_driver = { + .name = "nforce2", + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .verify = nforce2_verify, + .target = nforce2_target, + .get = nforce2_get, + .init = nforce2_cpu_init, + .exit = nforce2_cpu_exit, +}; + +#ifdef MODULE +static const struct pci_device_id nforce2_ids[] = { + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 }, + {} +}; +MODULE_DEVICE_TABLE(pci, nforce2_ids); +#endif + +/** + * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic + * + * Detects nForce2 A2 and C1 stepping + * + */ +static int nforce2_detect_chipset(void) +{ + nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NFORCE2, + PCI_ANY_ID, PCI_ANY_ID, NULL); + + if (nforce2_dev == NULL) + return -ENODEV; + + pr_info("Detected nForce2 chipset revision %X\n", + nforce2_dev->revision); + pr_info("FSB changing is maybe unstable and can lead to crashes and data loss\n"); + + return 0; +} + +/** + * nforce2_init - initializes the nForce2 CPUFreq driver + * + * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initialization, and zero on + * success. + */ +static int __init nforce2_init(void) +{ + /* TODO: do we need to detect the processor? */ + + /* detect chipset */ + if (nforce2_detect_chipset()) { + pr_info("No nForce2 chipset\n"); + return -ENODEV; + } + + return cpufreq_register_driver(&nforce2_driver); +} + +/** + * nforce2_exit - unregisters cpufreq module + * + * Unregisters nForce2 FSB change support. + */ +static void __exit nforce2_exit(void) +{ + cpufreq_unregister_driver(&nforce2_driver); +} + +module_init(nforce2_init); +module_exit(nforce2_exit); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c new file mode 100644 index 000000000..c8912756f --- /dev/null +++ b/drivers/cpufreq/cpufreq.c @@ -0,0 +1,2953 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/cpufreq/cpufreq.c + * + * Copyright (C) 2001 Russell King + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * (C) 2013 Viresh Kumar <viresh.kumar@linaro.org> + * + * Oct 2005 - Ashok Raj <ashok.raj@intel.com> + * Added handling for CPU hotplug + * Feb 2006 - Jacob Shin <jacob.shin@amd.com> + * Fix handling for CPU hotplug -- affected CPUs + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/cpu_cooling.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pm_qos.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/syscore_ops.h> +#include <linux/tick.h> +#include <linux/units.h> +#include <trace/events/power.h> + +static LIST_HEAD(cpufreq_policy_list); + +/* Macros to iterate over CPU policies */ +#define for_each_suitable_policy(__policy, __active) \ + list_for_each_entry(__policy, &cpufreq_policy_list, policy_list) \ + if ((__active) == !policy_is_inactive(__policy)) + +#define for_each_active_policy(__policy) \ + for_each_suitable_policy(__policy, true) +#define for_each_inactive_policy(__policy) \ + for_each_suitable_policy(__policy, false) + +/* Iterate over governors */ +static LIST_HEAD(cpufreq_governor_list); +#define for_each_governor(__governor) \ + list_for_each_entry(__governor, &cpufreq_governor_list, governor_list) + +static char default_governor[CPUFREQ_NAME_LEN]; + +/* + * The "cpufreq driver" - the arch- or hardware-dependent low + * level driver of CPUFreq support, and its spinlock. This lock + * also protects the cpufreq_cpu_data array. + */ +static struct cpufreq_driver *cpufreq_driver; +static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); +static DEFINE_RWLOCK(cpufreq_driver_lock); + +static DEFINE_STATIC_KEY_FALSE(cpufreq_freq_invariance); +bool cpufreq_supports_freq_invariance(void) +{ + return static_branch_likely(&cpufreq_freq_invariance); +} + +/* Flag to suspend/resume CPUFreq governors */ +static bool cpufreq_suspended; + +static inline bool has_target(void) +{ + return cpufreq_driver->target_index || cpufreq_driver->target; +} + +/* internal prototypes */ +static unsigned int __cpufreq_get(struct cpufreq_policy *policy); +static int cpufreq_init_governor(struct cpufreq_policy *policy); +static void cpufreq_exit_governor(struct cpufreq_policy *policy); +static void cpufreq_governor_limits(struct cpufreq_policy *policy); +static int cpufreq_set_policy(struct cpufreq_policy *policy, + struct cpufreq_governor *new_gov, + unsigned int new_pol); + +/* + * Two notifier lists: the "policy" list is involved in the + * validation process for a new CPU frequency policy; the + * "transition" list for kernel code that needs to handle + * changes to devices when the CPU clock speed changes. + * The mutex locks both lists. + */ +static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list); +SRCU_NOTIFIER_HEAD_STATIC(cpufreq_transition_notifier_list); + +static int off __read_mostly; +static int cpufreq_disabled(void) +{ + return off; +} +void disable_cpufreq(void) +{ + off = 1; +} +static DEFINE_MUTEX(cpufreq_governor_mutex); + +bool have_governor_per_policy(void) +{ + return !!(cpufreq_driver->flags & CPUFREQ_HAVE_GOVERNOR_PER_POLICY); +} +EXPORT_SYMBOL_GPL(have_governor_per_policy); + +static struct kobject *cpufreq_global_kobject; + +struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) +{ + if (have_governor_per_policy()) + return &policy->kobj; + else + return cpufreq_global_kobject; +} +EXPORT_SYMBOL_GPL(get_governor_parent_kobj); + +static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) +{ + struct kernel_cpustat kcpustat; + u64 cur_wall_time; + u64 idle_time; + u64 busy_time; + + cur_wall_time = jiffies64_to_nsecs(get_jiffies_64()); + + kcpustat_cpu_fetch(&kcpustat, cpu); + + busy_time = kcpustat.cpustat[CPUTIME_USER]; + busy_time += kcpustat.cpustat[CPUTIME_SYSTEM]; + busy_time += kcpustat.cpustat[CPUTIME_IRQ]; + busy_time += kcpustat.cpustat[CPUTIME_SOFTIRQ]; + busy_time += kcpustat.cpustat[CPUTIME_STEAL]; + busy_time += kcpustat.cpustat[CPUTIME_NICE]; + + idle_time = cur_wall_time - busy_time; + if (wall) + *wall = div_u64(cur_wall_time, NSEC_PER_USEC); + + return div_u64(idle_time, NSEC_PER_USEC); +} + +u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) +{ + u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); + + if (idle_time == -1ULL) + return get_cpu_idle_time_jiffy(cpu, wall); + else if (!io_busy) + idle_time += get_cpu_iowait_time_us(cpu, wall); + + return idle_time; +} +EXPORT_SYMBOL_GPL(get_cpu_idle_time); + +/* + * This is a generic cpufreq init() routine which can be used by cpufreq + * drivers of SMP systems. It will do following: + * - validate & show freq table passed + * - set policies transition latency + * - policy->cpus with all possible CPUs + */ +void cpufreq_generic_init(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table, + unsigned int transition_latency) +{ + policy->freq_table = table; + policy->cpuinfo.transition_latency = transition_latency; + + /* + * The driver only supports the SMP configuration where all processors + * share the clock and voltage and clock. + */ + cpumask_setall(policy->cpus); +} +EXPORT_SYMBOL_GPL(cpufreq_generic_init); + +struct cpufreq_policy *cpufreq_cpu_get_raw(unsigned int cpu) +{ + struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); + + return policy && cpumask_test_cpu(cpu, policy->cpus) ? policy : NULL; +} +EXPORT_SYMBOL_GPL(cpufreq_cpu_get_raw); + +unsigned int cpufreq_generic_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); + + if (!policy || IS_ERR(policy->clk)) { + pr_err("%s: No %s associated to cpu: %d\n", + __func__, policy ? "clk" : "policy", cpu); + return 0; + } + + return clk_get_rate(policy->clk) / 1000; +} +EXPORT_SYMBOL_GPL(cpufreq_generic_get); + +/** + * cpufreq_cpu_get - Return policy for a CPU and mark it as busy. + * @cpu: CPU to find the policy for. + * + * Call cpufreq_cpu_get_raw() to obtain a cpufreq policy for @cpu and increment + * the kobject reference counter of that policy. Return a valid policy on + * success or NULL on failure. + * + * The policy returned by this function has to be released with the help of + * cpufreq_cpu_put() to balance its kobject reference counter properly. + */ +struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = NULL; + unsigned long flags; + + if (WARN_ON(cpu >= nr_cpu_ids)) + return NULL; + + /* get the cpufreq driver */ + read_lock_irqsave(&cpufreq_driver_lock, flags); + + if (cpufreq_driver) { + /* get the CPU */ + policy = cpufreq_cpu_get_raw(cpu); + if (policy) + kobject_get(&policy->kobj); + } + + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + + return policy; +} +EXPORT_SYMBOL_GPL(cpufreq_cpu_get); + +/** + * cpufreq_cpu_put - Decrement kobject usage counter for cpufreq policy. + * @policy: cpufreq policy returned by cpufreq_cpu_get(). + */ +void cpufreq_cpu_put(struct cpufreq_policy *policy) +{ + kobject_put(&policy->kobj); +} +EXPORT_SYMBOL_GPL(cpufreq_cpu_put); + +/** + * cpufreq_cpu_release - Unlock a policy and decrement its usage counter. + * @policy: cpufreq policy returned by cpufreq_cpu_acquire(). + */ +void cpufreq_cpu_release(struct cpufreq_policy *policy) +{ + if (WARN_ON(!policy)) + return; + + lockdep_assert_held(&policy->rwsem); + + up_write(&policy->rwsem); + + cpufreq_cpu_put(policy); +} + +/** + * cpufreq_cpu_acquire - Find policy for a CPU, mark it as busy and lock it. + * @cpu: CPU to find the policy for. + * + * Call cpufreq_cpu_get() to get a reference on the cpufreq policy for @cpu and + * if the policy returned by it is not NULL, acquire its rwsem for writing. + * Return the policy if it is active or release it and return NULL otherwise. + * + * The policy returned by this function has to be released with the help of + * cpufreq_cpu_release() in order to release its rwsem and balance its usage + * counter properly. + */ +struct cpufreq_policy *cpufreq_cpu_acquire(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + + if (!policy) + return NULL; + + down_write(&policy->rwsem); + + if (policy_is_inactive(policy)) { + cpufreq_cpu_release(policy); + return NULL; + } + + return policy; +} + +/********************************************************************* + * EXTERNALLY AFFECTING FREQUENCY CHANGES * + *********************************************************************/ + +/** + * adjust_jiffies - Adjust the system "loops_per_jiffy". + * @val: CPUFREQ_PRECHANGE or CPUFREQ_POSTCHANGE. + * @ci: Frequency change information. + * + * This function alters the system "loops_per_jiffy" for the clock + * speed change. Note that loops_per_jiffy cannot be updated on SMP + * systems as each CPU might be scaled differently. So, use the arch + * per-CPU loops_per_jiffy value wherever possible. + */ +static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) +{ +#ifndef CONFIG_SMP + static unsigned long l_p_j_ref; + static unsigned int l_p_j_ref_freq; + + if (ci->flags & CPUFREQ_CONST_LOOPS) + return; + + if (!l_p_j_ref_freq) { + l_p_j_ref = loops_per_jiffy; + l_p_j_ref_freq = ci->old; + pr_debug("saving %lu as reference value for loops_per_jiffy; freq is %u kHz\n", + l_p_j_ref, l_p_j_ref_freq); + } + if (val == CPUFREQ_POSTCHANGE && ci->old != ci->new) { + loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, + ci->new); + pr_debug("scaling loops_per_jiffy to %lu for frequency %u kHz\n", + loops_per_jiffy, ci->new); + } +#endif +} + +/** + * cpufreq_notify_transition - Notify frequency transition and adjust jiffies. + * @policy: cpufreq policy to enable fast frequency switching for. + * @freqs: contain details of the frequency update. + * @state: set to CPUFREQ_PRECHANGE or CPUFREQ_POSTCHANGE. + * + * This function calls the transition notifiers and adjust_jiffies(). + * + * It is called twice on all CPU frequency changes that have external effects. + */ +static void cpufreq_notify_transition(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, + unsigned int state) +{ + int cpu; + + BUG_ON(irqs_disabled()); + + if (cpufreq_disabled()) + return; + + freqs->policy = policy; + freqs->flags = cpufreq_driver->flags; + pr_debug("notification %u of frequency transition to %u kHz\n", + state, freqs->new); + + switch (state) { + case CPUFREQ_PRECHANGE: + /* + * Detect if the driver reported a value as "old frequency" + * which is not equal to what the cpufreq core thinks is + * "old frequency". + */ + if (policy->cur && policy->cur != freqs->old) { + pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n", + freqs->old, policy->cur); + freqs->old = policy->cur; + } + + srcu_notifier_call_chain(&cpufreq_transition_notifier_list, + CPUFREQ_PRECHANGE, freqs); + + adjust_jiffies(CPUFREQ_PRECHANGE, freqs); + break; + + case CPUFREQ_POSTCHANGE: + adjust_jiffies(CPUFREQ_POSTCHANGE, freqs); + pr_debug("FREQ: %u - CPUs: %*pbl\n", freqs->new, + cpumask_pr_args(policy->cpus)); + + for_each_cpu(cpu, policy->cpus) + trace_cpu_frequency(freqs->new, cpu); + + srcu_notifier_call_chain(&cpufreq_transition_notifier_list, + CPUFREQ_POSTCHANGE, freqs); + + cpufreq_stats_record_transition(policy, freqs->new); + policy->cur = freqs->new; + } +} + +/* Do post notifications when there are chances that transition has failed */ +static void cpufreq_notify_post_transition(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, int transition_failed) +{ + cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE); + if (!transition_failed) + return; + + swap(freqs->old, freqs->new); + cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE); +} + +void cpufreq_freq_transition_begin(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs) +{ + + /* + * Catch double invocations of _begin() which lead to self-deadlock. + * ASYNC_NOTIFICATION drivers are left out because the cpufreq core + * doesn't invoke _begin() on their behalf, and hence the chances of + * double invocations are very low. Moreover, there are scenarios + * where these checks can emit false-positive warnings in these + * drivers; so we avoid that by skipping them altogether. + */ + WARN_ON(!(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION) + && current == policy->transition_task); + +wait: + wait_event(policy->transition_wait, !policy->transition_ongoing); + + spin_lock(&policy->transition_lock); + + if (unlikely(policy->transition_ongoing)) { + spin_unlock(&policy->transition_lock); + goto wait; + } + + policy->transition_ongoing = true; + policy->transition_task = current; + + spin_unlock(&policy->transition_lock); + + cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE); +} +EXPORT_SYMBOL_GPL(cpufreq_freq_transition_begin); + +void cpufreq_freq_transition_end(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, int transition_failed) +{ + if (WARN_ON(!policy->transition_ongoing)) + return; + + cpufreq_notify_post_transition(policy, freqs, transition_failed); + + arch_set_freq_scale(policy->related_cpus, + policy->cur, + policy->cpuinfo.max_freq); + + spin_lock(&policy->transition_lock); + policy->transition_ongoing = false; + policy->transition_task = NULL; + spin_unlock(&policy->transition_lock); + + wake_up(&policy->transition_wait); +} +EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end); + +/* + * Fast frequency switching status count. Positive means "enabled", negative + * means "disabled" and 0 means "not decided yet". + */ +static int cpufreq_fast_switch_count; +static DEFINE_MUTEX(cpufreq_fast_switch_lock); + +static void cpufreq_list_transition_notifiers(void) +{ + struct notifier_block *nb; + + pr_info("Registered transition notifiers:\n"); + + mutex_lock(&cpufreq_transition_notifier_list.mutex); + + for (nb = cpufreq_transition_notifier_list.head; nb; nb = nb->next) + pr_info("%pS\n", nb->notifier_call); + + mutex_unlock(&cpufreq_transition_notifier_list.mutex); +} + +/** + * cpufreq_enable_fast_switch - Enable fast frequency switching for policy. + * @policy: cpufreq policy to enable fast frequency switching for. + * + * Try to enable fast frequency switching for @policy. + * + * The attempt will fail if there is at least one transition notifier registered + * at this point, as fast frequency switching is quite fundamentally at odds + * with transition notifiers. Thus if successful, it will make registration of + * transition notifiers fail going forward. + */ +void cpufreq_enable_fast_switch(struct cpufreq_policy *policy) +{ + lockdep_assert_held(&policy->rwsem); + + if (!policy->fast_switch_possible) + return; + + mutex_lock(&cpufreq_fast_switch_lock); + if (cpufreq_fast_switch_count >= 0) { + cpufreq_fast_switch_count++; + policy->fast_switch_enabled = true; + } else { + pr_warn("CPU%u: Fast frequency switching not enabled\n", + policy->cpu); + cpufreq_list_transition_notifiers(); + } + mutex_unlock(&cpufreq_fast_switch_lock); +} +EXPORT_SYMBOL_GPL(cpufreq_enable_fast_switch); + +/** + * cpufreq_disable_fast_switch - Disable fast frequency switching for policy. + * @policy: cpufreq policy to disable fast frequency switching for. + */ +void cpufreq_disable_fast_switch(struct cpufreq_policy *policy) +{ + mutex_lock(&cpufreq_fast_switch_lock); + if (policy->fast_switch_enabled) { + policy->fast_switch_enabled = false; + if (!WARN_ON(cpufreq_fast_switch_count <= 0)) + cpufreq_fast_switch_count--; + } + mutex_unlock(&cpufreq_fast_switch_lock); +} +EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch); + +static unsigned int __resolve_freq(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int idx; + + target_freq = clamp_val(target_freq, policy->min, policy->max); + + if (!policy->freq_table) + return target_freq; + + idx = cpufreq_frequency_table_target(policy, target_freq, relation); + policy->cached_resolved_idx = idx; + policy->cached_target_freq = target_freq; + return policy->freq_table[idx].frequency; +} + +/** + * cpufreq_driver_resolve_freq - Map a target frequency to a driver-supported + * one. + * @policy: associated policy to interrogate + * @target_freq: target frequency to resolve. + * + * The target to driver frequency mapping is cached in the policy. + * + * Return: Lowest driver-supported frequency greater than or equal to the + * given target_freq, subject to policy (min/max) and driver limitations. + */ +unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + return __resolve_freq(policy, target_freq, CPUFREQ_RELATION_LE); +} +EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq); + +unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy) +{ + unsigned int latency; + + if (policy->transition_delay_us) + return policy->transition_delay_us; + + latency = policy->cpuinfo.transition_latency / NSEC_PER_USEC; + if (latency) { + /* + * For platforms that can change the frequency very fast (< 10 + * us), the above formula gives a decent transition delay. But + * for platforms where transition_latency is in milliseconds, it + * ends up giving unrealistic values. + * + * Cap the default transition delay to 10 ms, which seems to be + * a reasonable amount of time after which we should reevaluate + * the frequency. + */ + return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000); + } + + return LATENCY_MULTIPLIER; +} +EXPORT_SYMBOL_GPL(cpufreq_policy_transition_delay_us); + +/********************************************************************* + * SYSFS INTERFACE * + *********************************************************************/ +static ssize_t show_boost(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", cpufreq_driver->boost_enabled); +} + +static ssize_t store_boost(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t count) +{ + int ret, enable; + + ret = sscanf(buf, "%d", &enable); + if (ret != 1 || enable < 0 || enable > 1) + return -EINVAL; + + if (cpufreq_boost_trigger_state(enable)) { + pr_err("%s: Cannot %s BOOST!\n", + __func__, enable ? "enable" : "disable"); + return -EINVAL; + } + + pr_debug("%s: cpufreq BOOST %s\n", + __func__, enable ? "enabled" : "disabled"); + + return count; +} +define_one_global_rw(boost); + +static struct cpufreq_governor *find_governor(const char *str_governor) +{ + struct cpufreq_governor *t; + + for_each_governor(t) + if (!strncasecmp(str_governor, t->name, CPUFREQ_NAME_LEN)) + return t; + + return NULL; +} + +static struct cpufreq_governor *get_governor(const char *str_governor) +{ + struct cpufreq_governor *t; + + mutex_lock(&cpufreq_governor_mutex); + t = find_governor(str_governor); + if (!t) + goto unlock; + + if (!try_module_get(t->owner)) + t = NULL; + +unlock: + mutex_unlock(&cpufreq_governor_mutex); + + return t; +} + +static unsigned int cpufreq_parse_policy(char *str_governor) +{ + if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) + return CPUFREQ_POLICY_PERFORMANCE; + + if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) + return CPUFREQ_POLICY_POWERSAVE; + + return CPUFREQ_POLICY_UNKNOWN; +} + +/** + * cpufreq_parse_governor - parse a governor string only for has_target() + * @str_governor: Governor name. + */ +static struct cpufreq_governor *cpufreq_parse_governor(char *str_governor) +{ + struct cpufreq_governor *t; + + t = get_governor(str_governor); + if (t) + return t; + + if (request_module("cpufreq_%s", str_governor)) + return NULL; + + return get_governor(str_governor); +} + +/* + * cpufreq_per_cpu_attr_read() / show_##file_name() - + * print out cpufreq information + * + * Write out information from cpufreq_driver->policy[cpu]; object must be + * "unsigned int". + */ + +#define show_one(file_name, object) \ +static ssize_t show_##file_name \ +(struct cpufreq_policy *policy, char *buf) \ +{ \ + return sprintf(buf, "%u\n", policy->object); \ +} + +show_one(cpuinfo_min_freq, cpuinfo.min_freq); +show_one(cpuinfo_max_freq, cpuinfo.max_freq); +show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); +show_one(scaling_min_freq, min); +show_one(scaling_max_freq, max); + +__weak unsigned int arch_freq_get_on_cpu(int cpu) +{ + return 0; +} + +static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) +{ + ssize_t ret; + unsigned int freq; + + freq = arch_freq_get_on_cpu(policy->cpu); + if (freq) + ret = sprintf(buf, "%u\n", freq); + else if (cpufreq_driver->setpolicy && cpufreq_driver->get) + ret = sprintf(buf, "%u\n", cpufreq_driver->get(policy->cpu)); + else + ret = sprintf(buf, "%u\n", policy->cur); + return ret; +} + +/* + * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access + */ +#define store_one(file_name, object) \ +static ssize_t store_##file_name \ +(struct cpufreq_policy *policy, const char *buf, size_t count) \ +{ \ + unsigned long val; \ + int ret; \ + \ + ret = sscanf(buf, "%lu", &val); \ + if (ret != 1) \ + return -EINVAL; \ + \ + ret = freq_qos_update_request(policy->object##_freq_req, val);\ + return ret >= 0 ? count : ret; \ +} + +store_one(scaling_min_freq, min); +store_one(scaling_max_freq, max); + +/* + * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware + */ +static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, + char *buf) +{ + unsigned int cur_freq = __cpufreq_get(policy); + + if (cur_freq) + return sprintf(buf, "%u\n", cur_freq); + + return sprintf(buf, "<unknown>\n"); +} + +/* + * show_scaling_governor - show the current policy for the specified CPU + */ +static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) +{ + if (policy->policy == CPUFREQ_POLICY_POWERSAVE) + return sprintf(buf, "powersave\n"); + else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) + return sprintf(buf, "performance\n"); + else if (policy->governor) + return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", + policy->governor->name); + return -EINVAL; +} + +/* + * store_scaling_governor - store policy for the specified CPU + */ +static ssize_t store_scaling_governor(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + char str_governor[16]; + int ret; + + ret = sscanf(buf, "%15s", str_governor); + if (ret != 1) + return -EINVAL; + + if (cpufreq_driver->setpolicy) { + unsigned int new_pol; + + new_pol = cpufreq_parse_policy(str_governor); + if (!new_pol) + return -EINVAL; + + ret = cpufreq_set_policy(policy, NULL, new_pol); + } else { + struct cpufreq_governor *new_gov; + + new_gov = cpufreq_parse_governor(str_governor); + if (!new_gov) + return -EINVAL; + + ret = cpufreq_set_policy(policy, new_gov, + CPUFREQ_POLICY_UNKNOWN); + + module_put(new_gov->owner); + } + + return ret ? ret : count; +} + +/* + * show_scaling_driver - show the cpufreq driver currently loaded + */ +static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf) +{ + return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name); +} + +/* + * show_scaling_available_governors - show the available CPUfreq governors + */ +static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy, + char *buf) +{ + ssize_t i = 0; + struct cpufreq_governor *t; + + if (!has_target()) { + i += sprintf(buf, "performance powersave"); + goto out; + } + + mutex_lock(&cpufreq_governor_mutex); + for_each_governor(t) { + if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) + - (CPUFREQ_NAME_LEN + 2))) + break; + i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name); + } + mutex_unlock(&cpufreq_governor_mutex); +out: + i += sprintf(&buf[i], "\n"); + return i; +} + +ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf) +{ + ssize_t i = 0; + unsigned int cpu; + + for_each_cpu(cpu, mask) { + i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u ", cpu); + if (i >= (PAGE_SIZE - 5)) + break; + } + + /* Remove the extra space at the end */ + i--; + + i += sprintf(&buf[i], "\n"); + return i; +} +EXPORT_SYMBOL_GPL(cpufreq_show_cpus); + +/* + * show_related_cpus - show the CPUs affected by each transition even if + * hw coordination is in use + */ +static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) +{ + return cpufreq_show_cpus(policy->related_cpus, buf); +} + +/* + * show_affected_cpus - show the CPUs affected by each transition + */ +static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf) +{ + return cpufreq_show_cpus(policy->cpus, buf); +} + +static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + unsigned int freq = 0; + unsigned int ret; + + if (!policy->governor || !policy->governor->store_setspeed) + return -EINVAL; + + ret = sscanf(buf, "%u", &freq); + if (ret != 1) + return -EINVAL; + + policy->governor->store_setspeed(policy, freq); + + return count; +} + +static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf) +{ + if (!policy->governor || !policy->governor->show_setspeed) + return sprintf(buf, "<unsupported>\n"); + + return policy->governor->show_setspeed(policy, buf); +} + +/* + * show_bios_limit - show the current cpufreq HW/BIOS limitation + */ +static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf) +{ + unsigned int limit; + int ret; + ret = cpufreq_driver->bios_limit(policy->cpu, &limit); + if (!ret) + return sprintf(buf, "%u\n", limit); + return sprintf(buf, "%u\n", policy->cpuinfo.max_freq); +} + +cpufreq_freq_attr_ro_perm(cpuinfo_cur_freq, 0400); +cpufreq_freq_attr_ro(cpuinfo_min_freq); +cpufreq_freq_attr_ro(cpuinfo_max_freq); +cpufreq_freq_attr_ro(cpuinfo_transition_latency); +cpufreq_freq_attr_ro(scaling_available_governors); +cpufreq_freq_attr_ro(scaling_driver); +cpufreq_freq_attr_ro(scaling_cur_freq); +cpufreq_freq_attr_ro(bios_limit); +cpufreq_freq_attr_ro(related_cpus); +cpufreq_freq_attr_ro(affected_cpus); +cpufreq_freq_attr_rw(scaling_min_freq); +cpufreq_freq_attr_rw(scaling_max_freq); +cpufreq_freq_attr_rw(scaling_governor); +cpufreq_freq_attr_rw(scaling_setspeed); + +static struct attribute *cpufreq_attrs[] = { + &cpuinfo_min_freq.attr, + &cpuinfo_max_freq.attr, + &cpuinfo_transition_latency.attr, + &scaling_min_freq.attr, + &scaling_max_freq.attr, + &affected_cpus.attr, + &related_cpus.attr, + &scaling_governor.attr, + &scaling_driver.attr, + &scaling_available_governors.attr, + &scaling_setspeed.attr, + NULL +}; +ATTRIBUTE_GROUPS(cpufreq); + +#define to_policy(k) container_of(k, struct cpufreq_policy, kobj) +#define to_attr(a) container_of(a, struct freq_attr, attr) + +static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct cpufreq_policy *policy = to_policy(kobj); + struct freq_attr *fattr = to_attr(attr); + ssize_t ret = -EBUSY; + + if (!fattr->show) + return -EIO; + + down_read(&policy->rwsem); + if (likely(!policy_is_inactive(policy))) + ret = fattr->show(policy, buf); + up_read(&policy->rwsem); + + return ret; +} + +static ssize_t store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct cpufreq_policy *policy = to_policy(kobj); + struct freq_attr *fattr = to_attr(attr); + ssize_t ret = -EBUSY; + + if (!fattr->store) + return -EIO; + + down_write(&policy->rwsem); + if (likely(!policy_is_inactive(policy))) + ret = fattr->store(policy, buf, count); + up_write(&policy->rwsem); + + return ret; +} + +static void cpufreq_sysfs_release(struct kobject *kobj) +{ + struct cpufreq_policy *policy = to_policy(kobj); + pr_debug("last reference is dropped\n"); + complete(&policy->kobj_unregister); +} + +static const struct sysfs_ops sysfs_ops = { + .show = show, + .store = store, +}; + +static struct kobj_type ktype_cpufreq = { + .sysfs_ops = &sysfs_ops, + .default_groups = cpufreq_groups, + .release = cpufreq_sysfs_release, +}; + +static void add_cpu_dev_symlink(struct cpufreq_policy *policy, unsigned int cpu, + struct device *dev) +{ + if (unlikely(!dev)) + return; + + if (cpumask_test_and_set_cpu(cpu, policy->real_cpus)) + return; + + dev_dbg(dev, "%s: Adding symlink\n", __func__); + if (sysfs_create_link(&dev->kobj, &policy->kobj, "cpufreq")) + dev_err(dev, "cpufreq symlink creation failed\n"); +} + +static void remove_cpu_dev_symlink(struct cpufreq_policy *policy, int cpu, + struct device *dev) +{ + dev_dbg(dev, "%s: Removing symlink\n", __func__); + sysfs_remove_link(&dev->kobj, "cpufreq"); + cpumask_clear_cpu(cpu, policy->real_cpus); +} + +static int cpufreq_add_dev_interface(struct cpufreq_policy *policy) +{ + struct freq_attr **drv_attr; + int ret = 0; + + /* set up files for this cpu device */ + drv_attr = cpufreq_driver->attr; + while (drv_attr && *drv_attr) { + ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); + if (ret) + return ret; + drv_attr++; + } + if (cpufreq_driver->get) { + ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); + if (ret) + return ret; + } + + ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); + if (ret) + return ret; + + if (cpufreq_driver->bios_limit) { + ret = sysfs_create_file(&policy->kobj, &bios_limit.attr); + if (ret) + return ret; + } + + return 0; +} + +static int cpufreq_init_policy(struct cpufreq_policy *policy) +{ + struct cpufreq_governor *gov = NULL; + unsigned int pol = CPUFREQ_POLICY_UNKNOWN; + int ret; + + if (has_target()) { + /* Update policy governor to the one used before hotplug. */ + gov = get_governor(policy->last_governor); + if (gov) { + pr_debug("Restoring governor %s for cpu %d\n", + gov->name, policy->cpu); + } else { + gov = get_governor(default_governor); + } + + if (!gov) { + gov = cpufreq_default_governor(); + __module_get(gov->owner); + } + + } else { + + /* Use the default policy if there is no last_policy. */ + if (policy->last_policy) { + pol = policy->last_policy; + } else { + pol = cpufreq_parse_policy(default_governor); + /* + * In case the default governor is neither "performance" + * nor "powersave", fall back to the initial policy + * value set by the driver. + */ + if (pol == CPUFREQ_POLICY_UNKNOWN) + pol = policy->policy; + } + if (pol != CPUFREQ_POLICY_PERFORMANCE && + pol != CPUFREQ_POLICY_POWERSAVE) + return -ENODATA; + } + + ret = cpufreq_set_policy(policy, gov, pol); + if (gov) + module_put(gov->owner); + + return ret; +} + +static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu) +{ + int ret = 0; + + /* Has this CPU been taken care of already? */ + if (cpumask_test_cpu(cpu, policy->cpus)) + return 0; + + down_write(&policy->rwsem); + if (has_target()) + cpufreq_stop_governor(policy); + + cpumask_set_cpu(cpu, policy->cpus); + + if (has_target()) { + ret = cpufreq_start_governor(policy); + if (ret) + pr_err("%s: Failed to start governor\n", __func__); + } + up_write(&policy->rwsem); + return ret; +} + +void refresh_frequency_limits(struct cpufreq_policy *policy) +{ + if (!policy_is_inactive(policy)) { + pr_debug("updating policy for CPU %u\n", policy->cpu); + + cpufreq_set_policy(policy, policy->governor, policy->policy); + } +} +EXPORT_SYMBOL(refresh_frequency_limits); + +static void handle_update(struct work_struct *work) +{ + struct cpufreq_policy *policy = + container_of(work, struct cpufreq_policy, update); + + pr_debug("handle_update for cpu %u called\n", policy->cpu); + down_write(&policy->rwsem); + refresh_frequency_limits(policy); + up_write(&policy->rwsem); +} + +static int cpufreq_notifier_min(struct notifier_block *nb, unsigned long freq, + void *data) +{ + struct cpufreq_policy *policy = container_of(nb, struct cpufreq_policy, nb_min); + + schedule_work(&policy->update); + return 0; +} + +static int cpufreq_notifier_max(struct notifier_block *nb, unsigned long freq, + void *data) +{ + struct cpufreq_policy *policy = container_of(nb, struct cpufreq_policy, nb_max); + + schedule_work(&policy->update); + return 0; +} + +static void cpufreq_policy_put_kobj(struct cpufreq_policy *policy) +{ + struct kobject *kobj; + struct completion *cmp; + + down_write(&policy->rwsem); + cpufreq_stats_free_table(policy); + kobj = &policy->kobj; + cmp = &policy->kobj_unregister; + up_write(&policy->rwsem); + kobject_put(kobj); + + /* + * We need to make sure that the underlying kobj is + * actually not referenced anymore by anybody before we + * proceed with unloading. + */ + pr_debug("waiting for dropping of refcount\n"); + wait_for_completion(cmp); + pr_debug("wait complete\n"); +} + +static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu) +{ + struct cpufreq_policy *policy; + struct device *dev = get_cpu_device(cpu); + int ret; + + if (!dev) + return NULL; + + policy = kzalloc(sizeof(*policy), GFP_KERNEL); + if (!policy) + return NULL; + + if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) + goto err_free_policy; + + if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) + goto err_free_cpumask; + + if (!zalloc_cpumask_var(&policy->real_cpus, GFP_KERNEL)) + goto err_free_rcpumask; + + init_completion(&policy->kobj_unregister); + ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, + cpufreq_global_kobject, "policy%u", cpu); + if (ret) { + dev_err(dev, "%s: failed to init policy->kobj: %d\n", __func__, ret); + /* + * The entire policy object will be freed below, but the extra + * memory allocated for the kobject name needs to be freed by + * releasing the kobject. + */ + kobject_put(&policy->kobj); + goto err_free_real_cpus; + } + + freq_constraints_init(&policy->constraints); + + policy->nb_min.notifier_call = cpufreq_notifier_min; + policy->nb_max.notifier_call = cpufreq_notifier_max; + + ret = freq_qos_add_notifier(&policy->constraints, FREQ_QOS_MIN, + &policy->nb_min); + if (ret) { + dev_err(dev, "Failed to register MIN QoS notifier: %d (%*pbl)\n", + ret, cpumask_pr_args(policy->cpus)); + goto err_kobj_remove; + } + + ret = freq_qos_add_notifier(&policy->constraints, FREQ_QOS_MAX, + &policy->nb_max); + if (ret) { + dev_err(dev, "Failed to register MAX QoS notifier: %d (%*pbl)\n", + ret, cpumask_pr_args(policy->cpus)); + goto err_min_qos_notifier; + } + + INIT_LIST_HEAD(&policy->policy_list); + init_rwsem(&policy->rwsem); + spin_lock_init(&policy->transition_lock); + init_waitqueue_head(&policy->transition_wait); + INIT_WORK(&policy->update, handle_update); + + policy->cpu = cpu; + return policy; + +err_min_qos_notifier: + freq_qos_remove_notifier(&policy->constraints, FREQ_QOS_MIN, + &policy->nb_min); +err_kobj_remove: + cpufreq_policy_put_kobj(policy); +err_free_real_cpus: + free_cpumask_var(policy->real_cpus); +err_free_rcpumask: + free_cpumask_var(policy->related_cpus); +err_free_cpumask: + free_cpumask_var(policy->cpus); +err_free_policy: + kfree(policy); + + return NULL; +} + +static void cpufreq_policy_free(struct cpufreq_policy *policy) +{ + unsigned long flags; + int cpu; + + /* + * The callers must ensure the policy is inactive by now, to avoid any + * races with show()/store() callbacks. + */ + if (unlikely(!policy_is_inactive(policy))) + pr_warn("%s: Freeing active policy\n", __func__); + + /* Remove policy from list */ + write_lock_irqsave(&cpufreq_driver_lock, flags); + list_del(&policy->policy_list); + + for_each_cpu(cpu, policy->related_cpus) + per_cpu(cpufreq_cpu_data, cpu) = NULL; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + freq_qos_remove_notifier(&policy->constraints, FREQ_QOS_MAX, + &policy->nb_max); + freq_qos_remove_notifier(&policy->constraints, FREQ_QOS_MIN, + &policy->nb_min); + + /* Cancel any pending policy->update work before freeing the policy. */ + cancel_work_sync(&policy->update); + + if (policy->max_freq_req) { + /* + * Remove max_freq_req after sending CPUFREQ_REMOVE_POLICY + * notification, since CPUFREQ_CREATE_POLICY notification was + * sent after adding max_freq_req earlier. + */ + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_REMOVE_POLICY, policy); + freq_qos_remove_request(policy->max_freq_req); + } + + freq_qos_remove_request(policy->min_freq_req); + kfree(policy->min_freq_req); + + cpufreq_policy_put_kobj(policy); + free_cpumask_var(policy->real_cpus); + free_cpumask_var(policy->related_cpus); + free_cpumask_var(policy->cpus); + kfree(policy); +} + +static int cpufreq_online(unsigned int cpu) +{ + struct cpufreq_policy *policy; + bool new_policy; + unsigned long flags; + unsigned int j; + int ret; + + pr_debug("%s: bringing CPU%u online\n", __func__, cpu); + + /* Check if this CPU already has a policy to manage it */ + policy = per_cpu(cpufreq_cpu_data, cpu); + if (policy) { + WARN_ON(!cpumask_test_cpu(cpu, policy->related_cpus)); + if (!policy_is_inactive(policy)) + return cpufreq_add_policy_cpu(policy, cpu); + + /* This is the only online CPU for the policy. Start over. */ + new_policy = false; + down_write(&policy->rwsem); + policy->cpu = cpu; + policy->governor = NULL; + } else { + new_policy = true; + policy = cpufreq_policy_alloc(cpu); + if (!policy) + return -ENOMEM; + down_write(&policy->rwsem); + } + + if (!new_policy && cpufreq_driver->online) { + /* Recover policy->cpus using related_cpus */ + cpumask_copy(policy->cpus, policy->related_cpus); + + ret = cpufreq_driver->online(policy); + if (ret) { + pr_debug("%s: %d: initialization failed\n", __func__, + __LINE__); + goto out_exit_policy; + } + } else { + cpumask_copy(policy->cpus, cpumask_of(cpu)); + + /* + * Call driver. From then on the cpufreq must be able + * to accept all calls to ->verify and ->setpolicy for this CPU. + */ + ret = cpufreq_driver->init(policy); + if (ret) { + pr_debug("%s: %d: initialization failed\n", __func__, + __LINE__); + goto out_free_policy; + } + + /* + * The initialization has succeeded and the policy is online. + * If there is a problem with its frequency table, take it + * offline and drop it. + */ + ret = cpufreq_table_validate_and_sort(policy); + if (ret) + goto out_offline_policy; + + /* related_cpus should at least include policy->cpus. */ + cpumask_copy(policy->related_cpus, policy->cpus); + } + + /* + * affected cpus must always be the one, which are online. We aren't + * managing offline cpus here. + */ + cpumask_and(policy->cpus, policy->cpus, cpu_online_mask); + + if (new_policy) { + for_each_cpu(j, policy->related_cpus) { + per_cpu(cpufreq_cpu_data, j) = policy; + add_cpu_dev_symlink(policy, j, get_cpu_device(j)); + } + + policy->min_freq_req = kzalloc(2 * sizeof(*policy->min_freq_req), + GFP_KERNEL); + if (!policy->min_freq_req) { + ret = -ENOMEM; + goto out_destroy_policy; + } + + ret = freq_qos_add_request(&policy->constraints, + policy->min_freq_req, FREQ_QOS_MIN, + FREQ_QOS_MIN_DEFAULT_VALUE); + if (ret < 0) { + /* + * So we don't call freq_qos_remove_request() for an + * uninitialized request. + */ + kfree(policy->min_freq_req); + policy->min_freq_req = NULL; + goto out_destroy_policy; + } + + /* + * This must be initialized right here to avoid calling + * freq_qos_remove_request() on uninitialized request in case + * of errors. + */ + policy->max_freq_req = policy->min_freq_req + 1; + + ret = freq_qos_add_request(&policy->constraints, + policy->max_freq_req, FREQ_QOS_MAX, + FREQ_QOS_MAX_DEFAULT_VALUE); + if (ret < 0) { + policy->max_freq_req = NULL; + goto out_destroy_policy; + } + + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_CREATE_POLICY, policy); + } + + if (cpufreq_driver->get && has_target()) { + policy->cur = cpufreq_driver->get(policy->cpu); + if (!policy->cur) { + ret = -EIO; + pr_err("%s: ->get() failed\n", __func__); + goto out_destroy_policy; + } + } + + /* + * Sometimes boot loaders set CPU frequency to a value outside of + * frequency table present with cpufreq core. In such cases CPU might be + * unstable if it has to run on that frequency for long duration of time + * and so its better to set it to a frequency which is specified in + * freq-table. This also makes cpufreq stats inconsistent as + * cpufreq-stats would fail to register because current frequency of CPU + * isn't found in freq-table. + * + * Because we don't want this change to effect boot process badly, we go + * for the next freq which is >= policy->cur ('cur' must be set by now, + * otherwise we will end up setting freq to lowest of the table as 'cur' + * is initialized to zero). + * + * We are passing target-freq as "policy->cur - 1" otherwise + * __cpufreq_driver_target() would simply fail, as policy->cur will be + * equal to target-freq. + */ + if ((cpufreq_driver->flags & CPUFREQ_NEED_INITIAL_FREQ_CHECK) + && has_target()) { + unsigned int old_freq = policy->cur; + + /* Are we running at unknown frequency ? */ + ret = cpufreq_frequency_table_get_index(policy, old_freq); + if (ret == -EINVAL) { + ret = __cpufreq_driver_target(policy, old_freq - 1, + CPUFREQ_RELATION_L); + + /* + * Reaching here after boot in a few seconds may not + * mean that system will remain stable at "unknown" + * frequency for longer duration. Hence, a BUG_ON(). + */ + BUG_ON(ret); + pr_info("%s: CPU%d: Running at unlisted initial frequency: %u KHz, changing to: %u KHz\n", + __func__, policy->cpu, old_freq, policy->cur); + } + } + + if (new_policy) { + ret = cpufreq_add_dev_interface(policy); + if (ret) + goto out_destroy_policy; + + cpufreq_stats_create_table(policy); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + list_add(&policy->policy_list, &cpufreq_policy_list); + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + /* + * Register with the energy model before + * sched_cpufreq_governor_change() is called, which will result + * in rebuilding of the sched domains, which should only be done + * once the energy model is properly initialized for the policy + * first. + * + * Also, this should be called before the policy is registered + * with cooling framework. + */ + if (cpufreq_driver->register_em) + cpufreq_driver->register_em(policy); + } + + ret = cpufreq_init_policy(policy); + if (ret) { + pr_err("%s: Failed to initialize policy for cpu: %d (%d)\n", + __func__, cpu, ret); + goto out_destroy_policy; + } + + up_write(&policy->rwsem); + + kobject_uevent(&policy->kobj, KOBJ_ADD); + + /* Callback for handling stuff after policy is ready */ + if (cpufreq_driver->ready) + cpufreq_driver->ready(policy); + + if (cpufreq_thermal_control_enabled(cpufreq_driver)) + policy->cdev = of_cpufreq_cooling_register(policy); + + pr_debug("initialization complete\n"); + + return 0; + +out_destroy_policy: + for_each_cpu(j, policy->real_cpus) + remove_cpu_dev_symlink(policy, j, get_cpu_device(j)); + +out_offline_policy: + if (cpufreq_driver->offline) + cpufreq_driver->offline(policy); + +out_exit_policy: + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); + +out_free_policy: + cpumask_clear(policy->cpus); + up_write(&policy->rwsem); + + cpufreq_policy_free(policy); + return ret; +} + +/** + * cpufreq_add_dev - the cpufreq interface for a CPU device. + * @dev: CPU device. + * @sif: Subsystem interface structure pointer (not used) + */ +static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) +{ + struct cpufreq_policy *policy; + unsigned cpu = dev->id; + int ret; + + dev_dbg(dev, "%s: adding CPU%u\n", __func__, cpu); + + if (cpu_online(cpu)) { + ret = cpufreq_online(cpu); + if (ret) + return ret; + } + + /* Create sysfs link on CPU registration */ + policy = per_cpu(cpufreq_cpu_data, cpu); + if (policy) + add_cpu_dev_symlink(policy, cpu, dev); + + return 0; +} + +static void __cpufreq_offline(unsigned int cpu, struct cpufreq_policy *policy) +{ + int ret; + + if (has_target()) + cpufreq_stop_governor(policy); + + cpumask_clear_cpu(cpu, policy->cpus); + + if (!policy_is_inactive(policy)) { + /* Nominate a new CPU if necessary. */ + if (cpu == policy->cpu) + policy->cpu = cpumask_any(policy->cpus); + + /* Start the governor again for the active policy. */ + if (has_target()) { + ret = cpufreq_start_governor(policy); + if (ret) + pr_err("%s: Failed to start governor\n", __func__); + } + + return; + } + + if (has_target()) + strncpy(policy->last_governor, policy->governor->name, + CPUFREQ_NAME_LEN); + else + policy->last_policy = policy->policy; + + if (cpufreq_thermal_control_enabled(cpufreq_driver)) { + cpufreq_cooling_unregister(policy->cdev); + policy->cdev = NULL; + } + + if (has_target()) + cpufreq_exit_governor(policy); + + /* + * Perform the ->offline() during light-weight tear-down, as + * that allows fast recovery when the CPU comes back. + */ + if (cpufreq_driver->offline) { + cpufreq_driver->offline(policy); + } else if (cpufreq_driver->exit) { + cpufreq_driver->exit(policy); + policy->freq_table = NULL; + } +} + +static int cpufreq_offline(unsigned int cpu) +{ + struct cpufreq_policy *policy; + + pr_debug("%s: unregistering CPU %u\n", __func__, cpu); + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy) { + pr_debug("%s: No cpu_data found\n", __func__); + return 0; + } + + down_write(&policy->rwsem); + + __cpufreq_offline(cpu, policy); + + up_write(&policy->rwsem); + return 0; +} + +/* + * cpufreq_remove_dev - remove a CPU device + * + * Removes the cpufreq interface for a CPU device. + */ +static void cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) +{ + unsigned int cpu = dev->id; + struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); + + if (!policy) + return; + + down_write(&policy->rwsem); + + if (cpu_online(cpu)) + __cpufreq_offline(cpu, policy); + + remove_cpu_dev_symlink(policy, cpu, dev); + + if (!cpumask_empty(policy->real_cpus)) { + up_write(&policy->rwsem); + return; + } + + /* We did light-weight exit earlier, do full tear down now */ + if (cpufreq_driver->offline) + cpufreq_driver->exit(policy); + + up_write(&policy->rwsem); + + cpufreq_policy_free(policy); +} + +/** + * cpufreq_out_of_sync - Fix up actual and saved CPU frequency difference. + * @policy: Policy managing CPUs. + * @new_freq: New CPU frequency. + * + * Adjust to the current frequency first and clean up later by either calling + * cpufreq_update_policy(), or scheduling handle_update(). + */ +static void cpufreq_out_of_sync(struct cpufreq_policy *policy, + unsigned int new_freq) +{ + struct cpufreq_freqs freqs; + + pr_debug("Warning: CPU frequency out of sync: cpufreq and timing core thinks of %u, is %u kHz\n", + policy->cur, new_freq); + + freqs.old = policy->cur; + freqs.new = new_freq; + + cpufreq_freq_transition_begin(policy, &freqs); + cpufreq_freq_transition_end(policy, &freqs, 0); +} + +static unsigned int cpufreq_verify_current_freq(struct cpufreq_policy *policy, bool update) +{ + unsigned int new_freq; + + new_freq = cpufreq_driver->get(policy->cpu); + if (!new_freq) + return 0; + + /* + * If fast frequency switching is used with the given policy, the check + * against policy->cur is pointless, so skip it in that case. + */ + if (policy->fast_switch_enabled || !has_target()) + return new_freq; + + if (policy->cur != new_freq) { + /* + * For some platforms, the frequency returned by hardware may be + * slightly different from what is provided in the frequency + * table, for example hardware may return 499 MHz instead of 500 + * MHz. In such cases it is better to avoid getting into + * unnecessary frequency updates. + */ + if (abs(policy->cur - new_freq) < KHZ_PER_MHZ) + return policy->cur; + + cpufreq_out_of_sync(policy, new_freq); + if (update) + schedule_work(&policy->update); + } + + return new_freq; +} + +/** + * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur + * @cpu: CPU number + * + * This is the last known freq, without actually getting it from the driver. + * Return value will be same as what is shown in scaling_cur_freq in sysfs. + */ +unsigned int cpufreq_quick_get(unsigned int cpu) +{ + struct cpufreq_policy *policy; + unsigned int ret_freq = 0; + unsigned long flags; + + read_lock_irqsave(&cpufreq_driver_lock, flags); + + if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get) { + ret_freq = cpufreq_driver->get(cpu); + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + return ret_freq; + } + + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + + policy = cpufreq_cpu_get(cpu); + if (policy) { + ret_freq = policy->cur; + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_quick_get); + +/** + * cpufreq_quick_get_max - get the max reported CPU frequency for this CPU + * @cpu: CPU number + * + * Just return the max possible frequency for a given CPU. + */ +unsigned int cpufreq_quick_get_max(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + unsigned int ret_freq = 0; + + if (policy) { + ret_freq = policy->max; + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_quick_get_max); + +/** + * cpufreq_get_hw_max_freq - get the max hardware frequency of the CPU + * @cpu: CPU number + * + * The default return value is the max_freq field of cpuinfo. + */ +__weak unsigned int cpufreq_get_hw_max_freq(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + unsigned int ret_freq = 0; + + if (policy) { + ret_freq = policy->cpuinfo.max_freq; + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_get_hw_max_freq); + +static unsigned int __cpufreq_get(struct cpufreq_policy *policy) +{ + if (unlikely(policy_is_inactive(policy))) + return 0; + + return cpufreq_verify_current_freq(policy, true); +} + +/** + * cpufreq_get - get the current CPU frequency (in kHz) + * @cpu: CPU number + * + * Get the CPU current (static) CPU frequency + */ +unsigned int cpufreq_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + unsigned int ret_freq = 0; + + if (policy) { + down_read(&policy->rwsem); + if (cpufreq_driver->get) + ret_freq = __cpufreq_get(policy); + up_read(&policy->rwsem); + + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_get); + +static struct subsys_interface cpufreq_interface = { + .name = "cpufreq", + .subsys = &cpu_subsys, + .add_dev = cpufreq_add_dev, + .remove_dev = cpufreq_remove_dev, +}; + +/* + * In case platform wants some specific frequency to be configured + * during suspend.. + */ +int cpufreq_generic_suspend(struct cpufreq_policy *policy) +{ + int ret; + + if (!policy->suspend_freq) { + pr_debug("%s: suspend_freq not defined\n", __func__); + return 0; + } + + pr_debug("%s: Setting suspend-freq: %u\n", __func__, + policy->suspend_freq); + + ret = __cpufreq_driver_target(policy, policy->suspend_freq, + CPUFREQ_RELATION_H); + if (ret) + pr_err("%s: unable to set suspend-freq: %u. err: %d\n", + __func__, policy->suspend_freq, ret); + + return ret; +} +EXPORT_SYMBOL(cpufreq_generic_suspend); + +/** + * cpufreq_suspend() - Suspend CPUFreq governors. + * + * Called during system wide Suspend/Hibernate cycles for suspending governors + * as some platforms can't change frequency after this point in suspend cycle. + * Because some of the devices (like: i2c, regulators, etc) they use for + * changing frequency are suspended quickly after this point. + */ +void cpufreq_suspend(void) +{ + struct cpufreq_policy *policy; + + if (!cpufreq_driver) + return; + + if (!has_target() && !cpufreq_driver->suspend) + goto suspend; + + pr_debug("%s: Suspending Governors\n", __func__); + + for_each_active_policy(policy) { + if (has_target()) { + down_write(&policy->rwsem); + cpufreq_stop_governor(policy); + up_write(&policy->rwsem); + } + + if (cpufreq_driver->suspend && cpufreq_driver->suspend(policy)) + pr_err("%s: Failed to suspend driver: %s\n", __func__, + cpufreq_driver->name); + } + +suspend: + cpufreq_suspended = true; +} + +/** + * cpufreq_resume() - Resume CPUFreq governors. + * + * Called during system wide Suspend/Hibernate cycle for resuming governors that + * are suspended with cpufreq_suspend(). + */ +void cpufreq_resume(void) +{ + struct cpufreq_policy *policy; + int ret; + + if (!cpufreq_driver) + return; + + if (unlikely(!cpufreq_suspended)) + return; + + cpufreq_suspended = false; + + if (!has_target() && !cpufreq_driver->resume) + return; + + pr_debug("%s: Resuming Governors\n", __func__); + + for_each_active_policy(policy) { + if (cpufreq_driver->resume && cpufreq_driver->resume(policy)) { + pr_err("%s: Failed to resume driver: %p\n", __func__, + policy); + } else if (has_target()) { + down_write(&policy->rwsem); + ret = cpufreq_start_governor(policy); + up_write(&policy->rwsem); + + if (ret) + pr_err("%s: Failed to start governor for policy: %p\n", + __func__, policy); + } + } +} + +/** + * cpufreq_driver_test_flags - Test cpufreq driver's flags against given ones. + * @flags: Flags to test against the current cpufreq driver's flags. + * + * Assumes that the driver is there, so callers must ensure that this is the + * case. + */ +bool cpufreq_driver_test_flags(u16 flags) +{ + return !!(cpufreq_driver->flags & flags); +} + +/** + * cpufreq_get_current_driver - Return the current driver's name. + * + * Return the name string of the currently registered cpufreq driver or NULL if + * none. + */ +const char *cpufreq_get_current_driver(void) +{ + if (cpufreq_driver) + return cpufreq_driver->name; + + return NULL; +} +EXPORT_SYMBOL_GPL(cpufreq_get_current_driver); + +/** + * cpufreq_get_driver_data - Return current driver data. + * + * Return the private data of the currently registered cpufreq driver, or NULL + * if no cpufreq driver has been registered. + */ +void *cpufreq_get_driver_data(void) +{ + if (cpufreq_driver) + return cpufreq_driver->driver_data; + + return NULL; +} +EXPORT_SYMBOL_GPL(cpufreq_get_driver_data); + +/********************************************************************* + * NOTIFIER LISTS INTERFACE * + *********************************************************************/ + +/** + * cpufreq_register_notifier - Register a notifier with cpufreq. + * @nb: notifier function to register. + * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER. + * + * Add a notifier to one of two lists: either a list of notifiers that run on + * clock rate changes (once before and once after every transition), or a list + * of notifiers that ron on cpufreq policy changes. + * + * This function may sleep and it has the same return values as + * blocking_notifier_chain_register(). + */ +int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) +{ + int ret; + + if (cpufreq_disabled()) + return -EINVAL; + + switch (list) { + case CPUFREQ_TRANSITION_NOTIFIER: + mutex_lock(&cpufreq_fast_switch_lock); + + if (cpufreq_fast_switch_count > 0) { + mutex_unlock(&cpufreq_fast_switch_lock); + return -EBUSY; + } + ret = srcu_notifier_chain_register( + &cpufreq_transition_notifier_list, nb); + if (!ret) + cpufreq_fast_switch_count--; + + mutex_unlock(&cpufreq_fast_switch_lock); + break; + case CPUFREQ_POLICY_NOTIFIER: + ret = blocking_notifier_chain_register( + &cpufreq_policy_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_register_notifier); + +/** + * cpufreq_unregister_notifier - Unregister a notifier from cpufreq. + * @nb: notifier block to be unregistered. + * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER. + * + * Remove a notifier from one of the cpufreq notifier lists. + * + * This function may sleep and it has the same return values as + * blocking_notifier_chain_unregister(). + */ +int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list) +{ + int ret; + + if (cpufreq_disabled()) + return -EINVAL; + + switch (list) { + case CPUFREQ_TRANSITION_NOTIFIER: + mutex_lock(&cpufreq_fast_switch_lock); + + ret = srcu_notifier_chain_unregister( + &cpufreq_transition_notifier_list, nb); + if (!ret && !WARN_ON(cpufreq_fast_switch_count >= 0)) + cpufreq_fast_switch_count++; + + mutex_unlock(&cpufreq_fast_switch_lock); + break; + case CPUFREQ_POLICY_NOTIFIER: + ret = blocking_notifier_chain_unregister( + &cpufreq_policy_notifier_list, nb); + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL(cpufreq_unregister_notifier); + + +/********************************************************************* + * GOVERNORS * + *********************************************************************/ + +/** + * cpufreq_driver_fast_switch - Carry out a fast CPU frequency switch. + * @policy: cpufreq policy to switch the frequency for. + * @target_freq: New frequency to set (may be approximate). + * + * Carry out a fast frequency switch without sleeping. + * + * The driver's ->fast_switch() callback invoked by this function must be + * suitable for being called from within RCU-sched read-side critical sections + * and it is expected to select the minimum available frequency greater than or + * equal to @target_freq (CPUFREQ_RELATION_L). + * + * This function must not be called if policy->fast_switch_enabled is unset. + * + * Governors calling this function must guarantee that it will never be invoked + * twice in parallel for the same policy and that it will never be called in + * parallel with either ->target() or ->target_index() for the same policy. + * + * Returns the actual frequency set for the CPU. + * + * If 0 is returned by the driver's ->fast_switch() callback to indicate an + * error condition, the hardware configuration must be preserved. + */ +unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + unsigned int freq; + int cpu; + + target_freq = clamp_val(target_freq, policy->min, policy->max); + freq = cpufreq_driver->fast_switch(policy, target_freq); + + if (!freq) + return 0; + + policy->cur = freq; + arch_set_freq_scale(policy->related_cpus, freq, + policy->cpuinfo.max_freq); + cpufreq_stats_record_transition(policy, freq); + + if (trace_cpu_frequency_enabled()) { + for_each_cpu(cpu, policy->cpus) + trace_cpu_frequency(freq, cpu); + } + + return freq; +} +EXPORT_SYMBOL_GPL(cpufreq_driver_fast_switch); + +/** + * cpufreq_driver_adjust_perf - Adjust CPU performance level in one go. + * @cpu: Target CPU. + * @min_perf: Minimum (required) performance level (units of @capacity). + * @target_perf: Target (desired) performance level (units of @capacity). + * @capacity: Capacity of the target CPU. + * + * Carry out a fast performance level switch of @cpu without sleeping. + * + * The driver's ->adjust_perf() callback invoked by this function must be + * suitable for being called from within RCU-sched read-side critical sections + * and it is expected to select a suitable performance level equal to or above + * @min_perf and preferably equal to or below @target_perf. + * + * This function must not be called if policy->fast_switch_enabled is unset. + * + * Governors calling this function must guarantee that it will never be invoked + * twice in parallel for the same CPU and that it will never be called in + * parallel with either ->target() or ->target_index() or ->fast_switch() for + * the same CPU. + */ +void cpufreq_driver_adjust_perf(unsigned int cpu, + unsigned long min_perf, + unsigned long target_perf, + unsigned long capacity) +{ + cpufreq_driver->adjust_perf(cpu, min_perf, target_perf, capacity); +} + +/** + * cpufreq_driver_has_adjust_perf - Check "direct fast switch" callback. + * + * Return 'true' if the ->adjust_perf callback is present for the + * current driver or 'false' otherwise. + */ +bool cpufreq_driver_has_adjust_perf(void) +{ + return !!cpufreq_driver->adjust_perf; +} + +/* Must set freqs->new to intermediate frequency */ +static int __target_intermediate(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, int index) +{ + int ret; + + freqs->new = cpufreq_driver->get_intermediate(policy, index); + + /* We don't need to switch to intermediate freq */ + if (!freqs->new) + return 0; + + pr_debug("%s: cpu: %d, switching to intermediate freq: oldfreq: %u, intermediate freq: %u\n", + __func__, policy->cpu, freqs->old, freqs->new); + + cpufreq_freq_transition_begin(policy, freqs); + ret = cpufreq_driver->target_intermediate(policy, index); + cpufreq_freq_transition_end(policy, freqs, ret); + + if (ret) + pr_err("%s: Failed to change to intermediate frequency: %d\n", + __func__, ret); + + return ret; +} + +static int __target_index(struct cpufreq_policy *policy, int index) +{ + struct cpufreq_freqs freqs = {.old = policy->cur, .flags = 0}; + unsigned int restore_freq, intermediate_freq = 0; + unsigned int newfreq = policy->freq_table[index].frequency; + int retval = -EINVAL; + bool notify; + + if (newfreq == policy->cur) + return 0; + + /* Save last value to restore later on errors */ + restore_freq = policy->cur; + + notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION); + if (notify) { + /* Handle switching to intermediate frequency */ + if (cpufreq_driver->get_intermediate) { + retval = __target_intermediate(policy, &freqs, index); + if (retval) + return retval; + + intermediate_freq = freqs.new; + /* Set old freq to intermediate */ + if (intermediate_freq) + freqs.old = freqs.new; + } + + freqs.new = newfreq; + pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n", + __func__, policy->cpu, freqs.old, freqs.new); + + cpufreq_freq_transition_begin(policy, &freqs); + } + + retval = cpufreq_driver->target_index(policy, index); + if (retval) + pr_err("%s: Failed to change cpu frequency: %d\n", __func__, + retval); + + if (notify) { + cpufreq_freq_transition_end(policy, &freqs, retval); + + /* + * Failed after setting to intermediate freq? Driver should have + * reverted back to initial frequency and so should we. Check + * here for intermediate_freq instead of get_intermediate, in + * case we haven't switched to intermediate freq at all. + */ + if (unlikely(retval && intermediate_freq)) { + freqs.old = intermediate_freq; + freqs.new = restore_freq; + cpufreq_freq_transition_begin(policy, &freqs); + cpufreq_freq_transition_end(policy, &freqs, 0); + } + } + + return retval; +} + +int __cpufreq_driver_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int old_target_freq = target_freq; + + if (cpufreq_disabled()) + return -ENODEV; + + target_freq = __resolve_freq(policy, target_freq, relation); + + pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n", + policy->cpu, target_freq, relation, old_target_freq); + + /* + * This might look like a redundant call as we are checking it again + * after finding index. But it is left intentionally for cases where + * exactly same freq is called again and so we can save on few function + * calls. + */ + if (target_freq == policy->cur && + !(cpufreq_driver->flags & CPUFREQ_NEED_UPDATE_LIMITS)) + return 0; + + if (cpufreq_driver->target) { + /* + * If the driver hasn't setup a single inefficient frequency, + * it's unlikely it knows how to decode CPUFREQ_RELATION_E. + */ + if (!policy->efficiencies_available) + relation &= ~CPUFREQ_RELATION_E; + + return cpufreq_driver->target(policy, target_freq, relation); + } + + if (!cpufreq_driver->target_index) + return -EINVAL; + + return __target_index(policy, policy->cached_resolved_idx); +} +EXPORT_SYMBOL_GPL(__cpufreq_driver_target); + +int cpufreq_driver_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + int ret; + + down_write(&policy->rwsem); + + ret = __cpufreq_driver_target(policy, target_freq, relation); + + up_write(&policy->rwsem); + + return ret; +} +EXPORT_SYMBOL_GPL(cpufreq_driver_target); + +__weak struct cpufreq_governor *cpufreq_fallback_governor(void) +{ + return NULL; +} + +static int cpufreq_init_governor(struct cpufreq_policy *policy) +{ + int ret; + + /* Don't start any governor operations if we are entering suspend */ + if (cpufreq_suspended) + return 0; + /* + * Governor might not be initiated here if ACPI _PPC changed + * notification happened, so check it. + */ + if (!policy->governor) + return -EINVAL; + + /* Platform doesn't want dynamic frequency switching ? */ + if (policy->governor->flags & CPUFREQ_GOV_DYNAMIC_SWITCHING && + cpufreq_driver->flags & CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING) { + struct cpufreq_governor *gov = cpufreq_fallback_governor(); + + if (gov) { + pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n", + policy->governor->name, gov->name); + policy->governor = gov; + } else { + return -EINVAL; + } + } + + if (!try_module_get(policy->governor->owner)) + return -EINVAL; + + pr_debug("%s: for CPU %u\n", __func__, policy->cpu); + + if (policy->governor->init) { + ret = policy->governor->init(policy); + if (ret) { + module_put(policy->governor->owner); + return ret; + } + } + + policy->strict_target = !!(policy->governor->flags & CPUFREQ_GOV_STRICT_TARGET); + + return 0; +} + +static void cpufreq_exit_governor(struct cpufreq_policy *policy) +{ + if (cpufreq_suspended || !policy->governor) + return; + + pr_debug("%s: for CPU %u\n", __func__, policy->cpu); + + if (policy->governor->exit) + policy->governor->exit(policy); + + module_put(policy->governor->owner); +} + +int cpufreq_start_governor(struct cpufreq_policy *policy) +{ + int ret; + + if (cpufreq_suspended) + return 0; + + if (!policy->governor) + return -EINVAL; + + pr_debug("%s: for CPU %u\n", __func__, policy->cpu); + + if (cpufreq_driver->get) + cpufreq_verify_current_freq(policy, false); + + if (policy->governor->start) { + ret = policy->governor->start(policy); + if (ret) + return ret; + } + + if (policy->governor->limits) + policy->governor->limits(policy); + + return 0; +} + +void cpufreq_stop_governor(struct cpufreq_policy *policy) +{ + if (cpufreq_suspended || !policy->governor) + return; + + pr_debug("%s: for CPU %u\n", __func__, policy->cpu); + + if (policy->governor->stop) + policy->governor->stop(policy); +} + +static void cpufreq_governor_limits(struct cpufreq_policy *policy) +{ + if (cpufreq_suspended || !policy->governor) + return; + + pr_debug("%s: for CPU %u\n", __func__, policy->cpu); + + if (policy->governor->limits) + policy->governor->limits(policy); +} + +int cpufreq_register_governor(struct cpufreq_governor *governor) +{ + int err; + + if (!governor) + return -EINVAL; + + if (cpufreq_disabled()) + return -ENODEV; + + mutex_lock(&cpufreq_governor_mutex); + + err = -EBUSY; + if (!find_governor(governor->name)) { + err = 0; + list_add(&governor->governor_list, &cpufreq_governor_list); + } + + mutex_unlock(&cpufreq_governor_mutex); + return err; +} +EXPORT_SYMBOL_GPL(cpufreq_register_governor); + +void cpufreq_unregister_governor(struct cpufreq_governor *governor) +{ + struct cpufreq_policy *policy; + unsigned long flags; + + if (!governor) + return; + + if (cpufreq_disabled()) + return; + + /* clear last_governor for all inactive policies */ + read_lock_irqsave(&cpufreq_driver_lock, flags); + for_each_inactive_policy(policy) { + if (!strcmp(policy->last_governor, governor->name)) { + policy->governor = NULL; + strcpy(policy->last_governor, "\0"); + } + } + read_unlock_irqrestore(&cpufreq_driver_lock, flags); + + mutex_lock(&cpufreq_governor_mutex); + list_del(&governor->governor_list); + mutex_unlock(&cpufreq_governor_mutex); +} +EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); + + +/********************************************************************* + * POLICY INTERFACE * + *********************************************************************/ + +/** + * cpufreq_get_policy - get the current cpufreq_policy + * @policy: struct cpufreq_policy into which the current cpufreq_policy + * is written + * @cpu: CPU to find the policy for + * + * Reads the current cpufreq policy. + */ +int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) +{ + struct cpufreq_policy *cpu_policy; + if (!policy) + return -EINVAL; + + cpu_policy = cpufreq_cpu_get(cpu); + if (!cpu_policy) + return -EINVAL; + + memcpy(policy, cpu_policy, sizeof(*policy)); + + cpufreq_cpu_put(cpu_policy); + return 0; +} +EXPORT_SYMBOL(cpufreq_get_policy); + +/** + * cpufreq_set_policy - Modify cpufreq policy parameters. + * @policy: Policy object to modify. + * @new_gov: Policy governor pointer. + * @new_pol: Policy value (for drivers with built-in governors). + * + * Invoke the cpufreq driver's ->verify() callback to sanity-check the frequency + * limits to be set for the policy, update @policy with the verified limits + * values and either invoke the driver's ->setpolicy() callback (if present) or + * carry out a governor update for @policy. That is, run the current governor's + * ->limits() callback (if @new_gov points to the same object as the one in + * @policy) or replace the governor for @policy with @new_gov. + * + * The cpuinfo part of @policy is not updated by this function. + */ +static int cpufreq_set_policy(struct cpufreq_policy *policy, + struct cpufreq_governor *new_gov, + unsigned int new_pol) +{ + struct cpufreq_policy_data new_data; + struct cpufreq_governor *old_gov; + int ret; + + memcpy(&new_data.cpuinfo, &policy->cpuinfo, sizeof(policy->cpuinfo)); + new_data.freq_table = policy->freq_table; + new_data.cpu = policy->cpu; + /* + * PM QoS framework collects all the requests from users and provide us + * the final aggregated value here. + */ + new_data.min = freq_qos_read_value(&policy->constraints, FREQ_QOS_MIN); + new_data.max = freq_qos_read_value(&policy->constraints, FREQ_QOS_MAX); + + pr_debug("setting new policy for CPU %u: %u - %u kHz\n", + new_data.cpu, new_data.min, new_data.max); + + /* + * Verify that the CPU speed can be set within these limits and make sure + * that min <= max. + */ + ret = cpufreq_driver->verify(&new_data); + if (ret) + return ret; + + /* + * Resolve policy min/max to available frequencies. It ensures + * no frequency resolution will neither overshoot the requested maximum + * nor undershoot the requested minimum. + */ + policy->min = new_data.min; + policy->max = new_data.max; + policy->min = __resolve_freq(policy, policy->min, CPUFREQ_RELATION_L); + policy->max = __resolve_freq(policy, policy->max, CPUFREQ_RELATION_H); + trace_cpu_frequency_limits(policy); + + policy->cached_target_freq = UINT_MAX; + + pr_debug("new min and max freqs are %u - %u kHz\n", + policy->min, policy->max); + + if (cpufreq_driver->setpolicy) { + policy->policy = new_pol; + pr_debug("setting range\n"); + return cpufreq_driver->setpolicy(policy); + } + + if (new_gov == policy->governor) { + pr_debug("governor limits update\n"); + cpufreq_governor_limits(policy); + return 0; + } + + pr_debug("governor switch\n"); + + /* save old, working values */ + old_gov = policy->governor; + /* end old governor */ + if (old_gov) { + cpufreq_stop_governor(policy); + cpufreq_exit_governor(policy); + } + + /* start new governor */ + policy->governor = new_gov; + ret = cpufreq_init_governor(policy); + if (!ret) { + ret = cpufreq_start_governor(policy); + if (!ret) { + pr_debug("governor change\n"); + sched_cpufreq_governor_change(policy, old_gov); + return 0; + } + cpufreq_exit_governor(policy); + } + + /* new governor failed, so re-start old one */ + pr_debug("starting governor %s failed\n", policy->governor->name); + if (old_gov) { + policy->governor = old_gov; + if (cpufreq_init_governor(policy)) + policy->governor = NULL; + else + cpufreq_start_governor(policy); + } + + return ret; +} + +/** + * cpufreq_update_policy - Re-evaluate an existing cpufreq policy. + * @cpu: CPU to re-evaluate the policy for. + * + * Update the current frequency for the cpufreq policy of @cpu and use + * cpufreq_set_policy() to re-apply the min and max limits, which triggers the + * evaluation of policy notifiers and the cpufreq driver's ->verify() callback + * for the policy in question, among other things. + */ +void cpufreq_update_policy(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu); + + if (!policy) + return; + + /* + * BIOS might change freq behind our back + * -> ask driver for current freq and notify governors about a change + */ + if (cpufreq_driver->get && has_target() && + (cpufreq_suspended || WARN_ON(!cpufreq_verify_current_freq(policy, false)))) + goto unlock; + + refresh_frequency_limits(policy); + +unlock: + cpufreq_cpu_release(policy); +} +EXPORT_SYMBOL(cpufreq_update_policy); + +/** + * cpufreq_update_limits - Update policy limits for a given CPU. + * @cpu: CPU to update the policy limits for. + * + * Invoke the driver's ->update_limits callback if present or call + * cpufreq_update_policy() for @cpu. + */ +void cpufreq_update_limits(unsigned int cpu) +{ + if (cpufreq_driver->update_limits) + cpufreq_driver->update_limits(cpu); + else + cpufreq_update_policy(cpu); +} +EXPORT_SYMBOL_GPL(cpufreq_update_limits); + +/********************************************************************* + * BOOST * + *********************************************************************/ +static int cpufreq_boost_set_sw(struct cpufreq_policy *policy, int state) +{ + int ret; + + if (!policy->freq_table) + return -ENXIO; + + ret = cpufreq_frequency_table_cpuinfo(policy, policy->freq_table); + if (ret) { + pr_err("%s: Policy frequency update failed\n", __func__); + return ret; + } + + ret = freq_qos_update_request(policy->max_freq_req, policy->max); + if (ret < 0) + return ret; + + return 0; +} + +int cpufreq_boost_trigger_state(int state) +{ + struct cpufreq_policy *policy; + unsigned long flags; + int ret = 0; + + if (cpufreq_driver->boost_enabled == state) + return 0; + + write_lock_irqsave(&cpufreq_driver_lock, flags); + cpufreq_driver->boost_enabled = state; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + cpus_read_lock(); + for_each_active_policy(policy) { + ret = cpufreq_driver->set_boost(policy, state); + if (ret) + goto err_reset_state; + } + cpus_read_unlock(); + + return 0; + +err_reset_state: + cpus_read_unlock(); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + cpufreq_driver->boost_enabled = !state; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + pr_err("%s: Cannot %s BOOST\n", + __func__, state ? "enable" : "disable"); + + return ret; +} + +static bool cpufreq_boost_supported(void) +{ + return cpufreq_driver->set_boost; +} + +static int create_boost_sysfs_file(void) +{ + int ret; + + ret = sysfs_create_file(cpufreq_global_kobject, &boost.attr); + if (ret) + pr_err("%s: cannot register global BOOST sysfs file\n", + __func__); + + return ret; +} + +static void remove_boost_sysfs_file(void) +{ + if (cpufreq_boost_supported()) + sysfs_remove_file(cpufreq_global_kobject, &boost.attr); +} + +int cpufreq_enable_boost_support(void) +{ + if (!cpufreq_driver) + return -EINVAL; + + if (cpufreq_boost_supported()) + return 0; + + cpufreq_driver->set_boost = cpufreq_boost_set_sw; + + /* This will get removed on driver unregister */ + return create_boost_sysfs_file(); +} +EXPORT_SYMBOL_GPL(cpufreq_enable_boost_support); + +int cpufreq_boost_enabled(void) +{ + return cpufreq_driver->boost_enabled; +} +EXPORT_SYMBOL_GPL(cpufreq_boost_enabled); + +/********************************************************************* + * REGISTER / UNREGISTER CPUFREQ DRIVER * + *********************************************************************/ +static enum cpuhp_state hp_online; + +static int cpuhp_cpufreq_online(unsigned int cpu) +{ + cpufreq_online(cpu); + + return 0; +} + +static int cpuhp_cpufreq_offline(unsigned int cpu) +{ + cpufreq_offline(cpu); + + return 0; +} + +/** + * cpufreq_register_driver - register a CPU Frequency driver + * @driver_data: A struct cpufreq_driver containing the values# + * submitted by the CPU Frequency driver. + * + * Registers a CPU Frequency driver to this core code. This code + * returns zero on success, -EEXIST when another driver got here first + * (and isn't unregistered in the meantime). + * + */ +int cpufreq_register_driver(struct cpufreq_driver *driver_data) +{ + unsigned long flags; + int ret; + + if (cpufreq_disabled()) + return -ENODEV; + + /* + * The cpufreq core depends heavily on the availability of device + * structure, make sure they are available before proceeding further. + */ + if (!get_cpu_device(0)) + return -EPROBE_DEFER; + + if (!driver_data || !driver_data->verify || !driver_data->init || + !(driver_data->setpolicy || driver_data->target_index || + driver_data->target) || + (driver_data->setpolicy && (driver_data->target_index || + driver_data->target)) || + (!driver_data->get_intermediate != !driver_data->target_intermediate) || + (!driver_data->online != !driver_data->offline)) + return -EINVAL; + + pr_debug("trying to register driver %s\n", driver_data->name); + + /* Protect against concurrent CPU online/offline. */ + cpus_read_lock(); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + if (cpufreq_driver) { + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + ret = -EEXIST; + goto out; + } + cpufreq_driver = driver_data; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + + /* + * Mark support for the scheduler's frequency invariance engine for + * drivers that implement target(), target_index() or fast_switch(). + */ + if (!cpufreq_driver->setpolicy) { + static_branch_enable_cpuslocked(&cpufreq_freq_invariance); + pr_debug("supports frequency invariance"); + } + + if (driver_data->setpolicy) + driver_data->flags |= CPUFREQ_CONST_LOOPS; + + if (cpufreq_boost_supported()) { + ret = create_boost_sysfs_file(); + if (ret) + goto err_null_driver; + } + + ret = subsys_interface_register(&cpufreq_interface); + if (ret) + goto err_boost_unreg; + + if (unlikely(list_empty(&cpufreq_policy_list))) { + /* if all ->init() calls failed, unregister */ + ret = -ENODEV; + pr_debug("%s: No CPU initialized for driver %s\n", __func__, + driver_data->name); + goto err_if_unreg; + } + + ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ONLINE_DYN, + "cpufreq:online", + cpuhp_cpufreq_online, + cpuhp_cpufreq_offline); + if (ret < 0) + goto err_if_unreg; + hp_online = ret; + ret = 0; + + pr_debug("driver %s up and running\n", driver_data->name); + goto out; + +err_if_unreg: + subsys_interface_unregister(&cpufreq_interface); +err_boost_unreg: + remove_boost_sysfs_file(); +err_null_driver: + write_lock_irqsave(&cpufreq_driver_lock, flags); + cpufreq_driver = NULL; + write_unlock_irqrestore(&cpufreq_driver_lock, flags); +out: + cpus_read_unlock(); + return ret; +} +EXPORT_SYMBOL_GPL(cpufreq_register_driver); + +/* + * cpufreq_unregister_driver - unregister the current CPUFreq driver + * + * Unregister the current CPUFreq driver. Only call this if you have + * the right to do so, i.e. if you have succeeded in initialising before! + * Returns zero if successful, and -EINVAL if the cpufreq_driver is + * currently not initialised. + */ +int cpufreq_unregister_driver(struct cpufreq_driver *driver) +{ + unsigned long flags; + + if (!cpufreq_driver || (driver != cpufreq_driver)) + return -EINVAL; + + pr_debug("unregistering driver %s\n", driver->name); + + /* Protect against concurrent cpu hotplug */ + cpus_read_lock(); + subsys_interface_unregister(&cpufreq_interface); + remove_boost_sysfs_file(); + static_branch_disable_cpuslocked(&cpufreq_freq_invariance); + cpuhp_remove_state_nocalls_cpuslocked(hp_online); + + write_lock_irqsave(&cpufreq_driver_lock, flags); + + cpufreq_driver = NULL; + + write_unlock_irqrestore(&cpufreq_driver_lock, flags); + cpus_read_unlock(); + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_unregister_driver); + +static int __init cpufreq_core_init(void) +{ + struct cpufreq_governor *gov = cpufreq_default_governor(); + + if (cpufreq_disabled()) + return -ENODEV; + + cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj); + BUG_ON(!cpufreq_global_kobject); + + if (!strlen(default_governor)) + strncpy(default_governor, gov->name, CPUFREQ_NAME_LEN); + + return 0; +} +module_param(off, int, 0444); +module_param_string(default_governor, default_governor, CPUFREQ_NAME_LEN, 0444); +core_initcall(cpufreq_core_init); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c new file mode 100644 index 000000000..b6bd0ff35 --- /dev/null +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * drivers/cpufreq/cpufreq_conservative.c + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * Jun Nakajima <jun.nakajima@intel.com> + * (C) 2009 Alexander Clouter <alex@digriz.org.uk> + */ + +#include <linux/slab.h> +#include "cpufreq_governor.h" + +struct cs_policy_dbs_info { + struct policy_dbs_info policy_dbs; + unsigned int down_skip; + unsigned int requested_freq; +}; + +static inline struct cs_policy_dbs_info *to_dbs_info(struct policy_dbs_info *policy_dbs) +{ + return container_of(policy_dbs, struct cs_policy_dbs_info, policy_dbs); +} + +struct cs_dbs_tuners { + unsigned int down_threshold; + unsigned int freq_step; +}; + +/* Conservative governor macros */ +#define DEF_FREQUENCY_UP_THRESHOLD (80) +#define DEF_FREQUENCY_DOWN_THRESHOLD (20) +#define DEF_FREQUENCY_STEP (5) +#define DEF_SAMPLING_DOWN_FACTOR (1) +#define MAX_SAMPLING_DOWN_FACTOR (10) + +static inline unsigned int get_freq_step(struct cs_dbs_tuners *cs_tuners, + struct cpufreq_policy *policy) +{ + unsigned int freq_step = (cs_tuners->freq_step * policy->max) / 100; + + /* max freq cannot be less than 100. But who knows... */ + if (unlikely(freq_step == 0)) + freq_step = DEF_FREQUENCY_STEP; + + return freq_step; +} + +/* + * Every sampling_rate, we check, if current idle time is less than 20% + * (default), then we try to increase frequency. Every sampling_rate * + * sampling_down_factor, we check, if current idle time is more than 80% + * (default), then we try to decrease frequency + * + * Frequency updates happen at minimum steps of 5% (default) of maximum + * frequency + */ +static unsigned int cs_dbs_update(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct cs_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); + unsigned int requested_freq = dbs_info->requested_freq; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int load = dbs_update(policy); + unsigned int freq_step; + + /* + * break out if we 'cannot' reduce the speed as the user might + * want freq_step to be zero + */ + if (cs_tuners->freq_step == 0) + goto out; + + /* + * If requested_freq is out of range, it is likely that the limits + * changed in the meantime, so fall back to current frequency in that + * case. + */ + if (requested_freq > policy->max || requested_freq < policy->min) { + requested_freq = policy->cur; + dbs_info->requested_freq = requested_freq; + } + + freq_step = get_freq_step(cs_tuners, policy); + + /* + * Decrease requested_freq one freq_step for each idle period that + * we didn't update the frequency. + */ + if (policy_dbs->idle_periods < UINT_MAX) { + unsigned int freq_steps = policy_dbs->idle_periods * freq_step; + + if (requested_freq > policy->min + freq_steps) + requested_freq -= freq_steps; + else + requested_freq = policy->min; + + policy_dbs->idle_periods = UINT_MAX; + } + + /* Check for frequency increase */ + if (load > dbs_data->up_threshold) { + dbs_info->down_skip = 0; + + /* if we are already at full speed then break out early */ + if (requested_freq == policy->max) + goto out; + + requested_freq += freq_step; + if (requested_freq > policy->max) + requested_freq = policy->max; + + __cpufreq_driver_target(policy, requested_freq, + CPUFREQ_RELATION_HE); + dbs_info->requested_freq = requested_freq; + goto out; + } + + /* if sampling_down_factor is active break out early */ + if (++dbs_info->down_skip < dbs_data->sampling_down_factor) + goto out; + dbs_info->down_skip = 0; + + /* Check for frequency decrease */ + if (load < cs_tuners->down_threshold) { + /* + * if we cannot reduce the frequency anymore, break out early + */ + if (requested_freq == policy->min) + goto out; + + if (requested_freq > freq_step) + requested_freq -= freq_step; + else + requested_freq = policy->min; + + __cpufreq_driver_target(policy, requested_freq, + CPUFREQ_RELATION_LE); + dbs_info->requested_freq = requested_freq; + } + + out: + return dbs_data->sampling_rate; +} + +/************************** sysfs interface ************************/ + +static ssize_t sampling_down_factor_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) + return -EINVAL; + + dbs_data->sampling_down_factor = input; + return count; +} + +static ssize_t up_threshold_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > 100 || input <= cs_tuners->down_threshold) + return -EINVAL; + + dbs_data->up_threshold = input; + return count; +} + +static ssize_t down_threshold_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + /* cannot be lower than 1 otherwise freq will not fall */ + if (ret != 1 || input < 1 || input > 100 || + input >= dbs_data->up_threshold) + return -EINVAL; + + cs_tuners->down_threshold = input; + return count; +} + +static ssize_t ignore_nice_load_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + if (input > 1) + input = 1; + + if (input == dbs_data->ignore_nice_load) /* nothing to do */ + return count; + + dbs_data->ignore_nice_load = input; + + /* we need to re-evaluate prev_cpu_idle */ + gov_update_cpu_data(dbs_data); + + return count; +} + +static ssize_t freq_step_store(struct gov_attr_set *attr_set, const char *buf, + size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct cs_dbs_tuners *cs_tuners = dbs_data->tuners; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1) + return -EINVAL; + + if (input > 100) + input = 100; + + /* + * no need to test here if freq_step is zero as the user might actually + * want this, they would be crazy though :) + */ + cs_tuners->freq_step = input; + return count; +} + +gov_show_one_common(sampling_rate); +gov_show_one_common(sampling_down_factor); +gov_show_one_common(up_threshold); +gov_show_one_common(ignore_nice_load); +gov_show_one(cs, down_threshold); +gov_show_one(cs, freq_step); + +gov_attr_rw(sampling_rate); +gov_attr_rw(sampling_down_factor); +gov_attr_rw(up_threshold); +gov_attr_rw(ignore_nice_load); +gov_attr_rw(down_threshold); +gov_attr_rw(freq_step); + +static struct attribute *cs_attrs[] = { + &sampling_rate.attr, + &sampling_down_factor.attr, + &up_threshold.attr, + &down_threshold.attr, + &ignore_nice_load.attr, + &freq_step.attr, + NULL +}; +ATTRIBUTE_GROUPS(cs); + +/************************** sysfs end ************************/ + +static struct policy_dbs_info *cs_alloc(void) +{ + struct cs_policy_dbs_info *dbs_info; + + dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL); + return dbs_info ? &dbs_info->policy_dbs : NULL; +} + +static void cs_free(struct policy_dbs_info *policy_dbs) +{ + kfree(to_dbs_info(policy_dbs)); +} + +static int cs_init(struct dbs_data *dbs_data) +{ + struct cs_dbs_tuners *tuners; + + tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); + if (!tuners) + return -ENOMEM; + + tuners->down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD; + tuners->freq_step = DEF_FREQUENCY_STEP; + dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; + dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; + dbs_data->ignore_nice_load = 0; + dbs_data->tuners = tuners; + + return 0; +} + +static void cs_exit(struct dbs_data *dbs_data) +{ + kfree(dbs_data->tuners); +} + +static void cs_start(struct cpufreq_policy *policy) +{ + struct cs_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); + + dbs_info->down_skip = 0; + dbs_info->requested_freq = policy->cur; +} + +static struct dbs_governor cs_governor = { + .gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("conservative"), + .kobj_type = { .default_groups = cs_groups }, + .gov_dbs_update = cs_dbs_update, + .alloc = cs_alloc, + .free = cs_free, + .init = cs_init, + .exit = cs_exit, + .start = cs_start, +}; + +#define CPU_FREQ_GOV_CONSERVATIVE (cs_governor.gov) + +MODULE_AUTHOR("Alexander Clouter <alex@digriz.org.uk>"); +MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for " + "Low Latency Frequency Transition capable processors " + "optimised for use in a battery environment"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE +struct cpufreq_governor *cpufreq_default_governor(void) +{ + return &CPU_FREQ_GOV_CONSERVATIVE; +} +#endif + +cpufreq_governor_init(CPU_FREQ_GOV_CONSERVATIVE); +cpufreq_governor_exit(CPU_FREQ_GOV_CONSERVATIVE); diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c new file mode 100644 index 000000000..85da677c4 --- /dev/null +++ b/drivers/cpufreq/cpufreq_governor.c @@ -0,0 +1,579 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * drivers/cpufreq/cpufreq_governor.c + * + * CPUFREQ governors common code + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * (C) 2003 Jun Nakajima <jun.nakajima@intel.com> + * (C) 2009 Alexander Clouter <alex@digriz.org.uk> + * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/export.h> +#include <linux/kernel_stat.h> +#include <linux/slab.h> + +#include "cpufreq_governor.h" + +#define CPUFREQ_DBS_MIN_SAMPLING_INTERVAL (2 * TICK_NSEC / NSEC_PER_USEC) + +static DEFINE_PER_CPU(struct cpu_dbs_info, cpu_dbs); + +static DEFINE_MUTEX(gov_dbs_data_mutex); + +/* Common sysfs tunables */ +/* + * sampling_rate_store - update sampling rate effective immediately if needed. + * + * If new rate is smaller than the old, simply updating + * dbs.sampling_rate might not be appropriate. For example, if the + * original sampling_rate was 1 second and the requested new sampling rate is 10 + * ms because the user needs immediate reaction from ondemand governor, but not + * sure if higher frequency will be required or not, then, the governor may + * change the sampling rate too late; up to 1 second later. Thus, if we are + * reducing the sampling rate, we need to make the new value effective + * immediately. + * + * This must be called with dbs_data->mutex held, otherwise traversing + * policy_dbs_list isn't safe. + */ +ssize_t sampling_rate_store(struct gov_attr_set *attr_set, const char *buf, + size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct policy_dbs_info *policy_dbs; + unsigned int sampling_interval; + int ret; + + ret = sscanf(buf, "%u", &sampling_interval); + if (ret != 1 || sampling_interval < CPUFREQ_DBS_MIN_SAMPLING_INTERVAL) + return -EINVAL; + + dbs_data->sampling_rate = sampling_interval; + + /* + * We are operating under dbs_data->mutex and so the list and its + * entries can't be freed concurrently. + */ + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { + mutex_lock(&policy_dbs->update_mutex); + /* + * On 32-bit architectures this may race with the + * sample_delay_ns read in dbs_update_util_handler(), but that + * really doesn't matter. If the read returns a value that's + * too big, the sample will be skipped, but the next invocation + * of dbs_update_util_handler() (when the update has been + * completed) will take a sample. + * + * If this runs in parallel with dbs_work_handler(), we may end + * up overwriting the sample_delay_ns value that it has just + * written, but it will be corrected next time a sample is + * taken, so it shouldn't be significant. + */ + gov_update_sample_delay(policy_dbs, 0); + mutex_unlock(&policy_dbs->update_mutex); + } + + return count; +} +EXPORT_SYMBOL_GPL(sampling_rate_store); + +/** + * gov_update_cpu_data - Update CPU load data. + * @dbs_data: Top-level governor data pointer. + * + * Update CPU load data for all CPUs in the domain governed by @dbs_data + * (that may be a single policy or a bunch of them if governor tunables are + * system-wide). + * + * Call under the @dbs_data mutex. + */ +void gov_update_cpu_data(struct dbs_data *dbs_data) +{ + struct policy_dbs_info *policy_dbs; + + list_for_each_entry(policy_dbs, &dbs_data->attr_set.policy_list, list) { + unsigned int j; + + for_each_cpu(j, policy_dbs->policy->cpus) { + struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); + + j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, + dbs_data->io_is_busy); + if (dbs_data->ignore_nice_load) + j_cdbs->prev_cpu_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j); + } + } +} +EXPORT_SYMBOL_GPL(gov_update_cpu_data); + +unsigned int dbs_update(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + unsigned int ignore_nice = dbs_data->ignore_nice_load; + unsigned int max_load = 0, idle_periods = UINT_MAX; + unsigned int sampling_rate, io_busy, j; + + /* + * Sometimes governors may use an additional multiplier to increase + * sample delays temporarily. Apply that multiplier to sampling_rate + * so as to keep the wake-up-from-idle detection logic a bit + * conservative. + */ + sampling_rate = dbs_data->sampling_rate * policy_dbs->rate_mult; + /* + * For the purpose of ondemand, waiting for disk IO is an indication + * that you're performance critical, and not that the system is actually + * idle, so do not add the iowait time to the CPU idle time then. + */ + io_busy = dbs_data->io_is_busy; + + /* Get Absolute Load */ + for_each_cpu(j, policy->cpus) { + struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); + u64 update_time, cur_idle_time; + unsigned int idle_time, time_elapsed; + unsigned int load; + + cur_idle_time = get_cpu_idle_time(j, &update_time, io_busy); + + time_elapsed = update_time - j_cdbs->prev_update_time; + j_cdbs->prev_update_time = update_time; + + idle_time = cur_idle_time - j_cdbs->prev_cpu_idle; + j_cdbs->prev_cpu_idle = cur_idle_time; + + if (ignore_nice) { + u64 cur_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j); + + idle_time += div_u64(cur_nice - j_cdbs->prev_cpu_nice, NSEC_PER_USEC); + j_cdbs->prev_cpu_nice = cur_nice; + } + + if (unlikely(!time_elapsed)) { + /* + * That can only happen when this function is called + * twice in a row with a very short interval between the + * calls, so the previous load value can be used then. + */ + load = j_cdbs->prev_load; + } else if (unlikely((int)idle_time > 2 * sampling_rate && + j_cdbs->prev_load)) { + /* + * If the CPU had gone completely idle and a task has + * just woken up on this CPU now, it would be unfair to + * calculate 'load' the usual way for this elapsed + * time-window, because it would show near-zero load, + * irrespective of how CPU intensive that task actually + * was. This is undesirable for latency-sensitive bursty + * workloads. + * + * To avoid this, reuse the 'load' from the previous + * time-window and give this task a chance to start with + * a reasonably high CPU frequency. However, that + * shouldn't be over-done, lest we get stuck at a high + * load (high frequency) for too long, even when the + * current system load has actually dropped down, so + * clear prev_load to guarantee that the load will be + * computed again next time. + * + * Detecting this situation is easy: an unusually large + * 'idle_time' (as compared to the sampling rate) + * indicates this scenario. + */ + load = j_cdbs->prev_load; + j_cdbs->prev_load = 0; + } else { + if (time_elapsed >= idle_time) { + load = 100 * (time_elapsed - idle_time) / time_elapsed; + } else { + /* + * That can happen if idle_time is returned by + * get_cpu_idle_time_jiffy(). In that case + * idle_time is roughly equal to the difference + * between time_elapsed and "busy time" obtained + * from CPU statistics. Then, the "busy time" + * can end up being greater than time_elapsed + * (for example, if jiffies_64 and the CPU + * statistics are updated by different CPUs), + * so idle_time may in fact be negative. That + * means, though, that the CPU was busy all + * the time (on the rough average) during the + * last sampling interval and 100 can be + * returned as the load. + */ + load = (int)idle_time < 0 ? 100 : 0; + } + j_cdbs->prev_load = load; + } + + if (unlikely((int)idle_time > 2 * sampling_rate)) { + unsigned int periods = idle_time / sampling_rate; + + if (periods < idle_periods) + idle_periods = periods; + } + + if (load > max_load) + max_load = load; + } + + policy_dbs->idle_periods = idle_periods; + + return max_load; +} +EXPORT_SYMBOL_GPL(dbs_update); + +static void dbs_work_handler(struct work_struct *work) +{ + struct policy_dbs_info *policy_dbs; + struct cpufreq_policy *policy; + struct dbs_governor *gov; + + policy_dbs = container_of(work, struct policy_dbs_info, work); + policy = policy_dbs->policy; + gov = dbs_governor_of(policy); + + /* + * Make sure cpufreq_governor_limits() isn't evaluating load or the + * ondemand governor isn't updating the sampling rate in parallel. + */ + mutex_lock(&policy_dbs->update_mutex); + gov_update_sample_delay(policy_dbs, gov->gov_dbs_update(policy)); + mutex_unlock(&policy_dbs->update_mutex); + + /* Allow the utilization update handler to queue up more work. */ + atomic_set(&policy_dbs->work_count, 0); + /* + * If the update below is reordered with respect to the sample delay + * modification, the utilization update handler may end up using a stale + * sample delay value. + */ + smp_wmb(); + policy_dbs->work_in_progress = false; +} + +static void dbs_irq_work(struct irq_work *irq_work) +{ + struct policy_dbs_info *policy_dbs; + + policy_dbs = container_of(irq_work, struct policy_dbs_info, irq_work); + schedule_work_on(smp_processor_id(), &policy_dbs->work); +} + +static void dbs_update_util_handler(struct update_util_data *data, u64 time, + unsigned int flags) +{ + struct cpu_dbs_info *cdbs = container_of(data, struct cpu_dbs_info, update_util); + struct policy_dbs_info *policy_dbs = cdbs->policy_dbs; + u64 delta_ns, lst; + + if (!cpufreq_this_cpu_can_update(policy_dbs->policy)) + return; + + /* + * The work may not be allowed to be queued up right now. + * Possible reasons: + * - Work has already been queued up or is in progress. + * - It is too early (too little time from the previous sample). + */ + if (policy_dbs->work_in_progress) + return; + + /* + * If the reads below are reordered before the check above, the value + * of sample_delay_ns used in the computation may be stale. + */ + smp_rmb(); + lst = READ_ONCE(policy_dbs->last_sample_time); + delta_ns = time - lst; + if ((s64)delta_ns < policy_dbs->sample_delay_ns) + return; + + /* + * If the policy is not shared, the irq_work may be queued up right away + * at this point. Otherwise, we need to ensure that only one of the + * CPUs sharing the policy will do that. + */ + if (policy_dbs->is_shared) { + if (!atomic_add_unless(&policy_dbs->work_count, 1, 1)) + return; + + /* + * If another CPU updated last_sample_time in the meantime, we + * shouldn't be here, so clear the work counter and bail out. + */ + if (unlikely(lst != READ_ONCE(policy_dbs->last_sample_time))) { + atomic_set(&policy_dbs->work_count, 0); + return; + } + } + + policy_dbs->last_sample_time = time; + policy_dbs->work_in_progress = true; + irq_work_queue(&policy_dbs->irq_work); +} + +static void gov_set_update_util(struct policy_dbs_info *policy_dbs, + unsigned int delay_us) +{ + struct cpufreq_policy *policy = policy_dbs->policy; + int cpu; + + gov_update_sample_delay(policy_dbs, delay_us); + policy_dbs->last_sample_time = 0; + + for_each_cpu(cpu, policy->cpus) { + struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu); + + cpufreq_add_update_util_hook(cpu, &cdbs->update_util, + dbs_update_util_handler); + } +} + +static inline void gov_clear_update_util(struct cpufreq_policy *policy) +{ + int i; + + for_each_cpu(i, policy->cpus) + cpufreq_remove_update_util_hook(i); + + synchronize_rcu(); +} + +static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *policy, + struct dbs_governor *gov) +{ + struct policy_dbs_info *policy_dbs; + int j; + + /* Allocate memory for per-policy governor data. */ + policy_dbs = gov->alloc(); + if (!policy_dbs) + return NULL; + + policy_dbs->policy = policy; + mutex_init(&policy_dbs->update_mutex); + atomic_set(&policy_dbs->work_count, 0); + init_irq_work(&policy_dbs->irq_work, dbs_irq_work); + INIT_WORK(&policy_dbs->work, dbs_work_handler); + + /* Set policy_dbs for all CPUs, online+offline */ + for_each_cpu(j, policy->related_cpus) { + struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); + + j_cdbs->policy_dbs = policy_dbs; + } + return policy_dbs; +} + +static void free_policy_dbs_info(struct policy_dbs_info *policy_dbs, + struct dbs_governor *gov) +{ + int j; + + mutex_destroy(&policy_dbs->update_mutex); + + for_each_cpu(j, policy_dbs->policy->related_cpus) { + struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); + + j_cdbs->policy_dbs = NULL; + j_cdbs->update_util.func = NULL; + } + gov->free(policy_dbs); +} + +static void cpufreq_dbs_data_release(struct kobject *kobj) +{ + struct dbs_data *dbs_data = to_dbs_data(to_gov_attr_set(kobj)); + struct dbs_governor *gov = dbs_data->gov; + + gov->exit(dbs_data); + kfree(dbs_data); +} + +int cpufreq_dbs_governor_init(struct cpufreq_policy *policy) +{ + struct dbs_governor *gov = dbs_governor_of(policy); + struct dbs_data *dbs_data; + struct policy_dbs_info *policy_dbs; + int ret = 0; + + /* State should be equivalent to EXIT */ + if (policy->governor_data) + return -EBUSY; + + policy_dbs = alloc_policy_dbs_info(policy, gov); + if (!policy_dbs) + return -ENOMEM; + + /* Protect gov->gdbs_data against concurrent updates. */ + mutex_lock(&gov_dbs_data_mutex); + + dbs_data = gov->gdbs_data; + if (dbs_data) { + if (WARN_ON(have_governor_per_policy())) { + ret = -EINVAL; + goto free_policy_dbs_info; + } + policy_dbs->dbs_data = dbs_data; + policy->governor_data = policy_dbs; + + gov_attr_set_get(&dbs_data->attr_set, &policy_dbs->list); + goto out; + } + + dbs_data = kzalloc(sizeof(*dbs_data), GFP_KERNEL); + if (!dbs_data) { + ret = -ENOMEM; + goto free_policy_dbs_info; + } + + dbs_data->gov = gov; + gov_attr_set_init(&dbs_data->attr_set, &policy_dbs->list); + + ret = gov->init(dbs_data); + if (ret) + goto free_policy_dbs_info; + + /* + * The sampling interval should not be less than the transition latency + * of the CPU and it also cannot be too small for dbs_update() to work + * correctly. + */ + dbs_data->sampling_rate = max_t(unsigned int, + CPUFREQ_DBS_MIN_SAMPLING_INTERVAL, + cpufreq_policy_transition_delay_us(policy)); + + if (!have_governor_per_policy()) + gov->gdbs_data = dbs_data; + + policy_dbs->dbs_data = dbs_data; + policy->governor_data = policy_dbs; + + gov->kobj_type.sysfs_ops = &governor_sysfs_ops; + gov->kobj_type.release = cpufreq_dbs_data_release; + ret = kobject_init_and_add(&dbs_data->attr_set.kobj, &gov->kobj_type, + get_governor_parent_kobj(policy), + "%s", gov->gov.name); + if (!ret) + goto out; + + /* Failure, so roll back. */ + pr_err("initialization failed (dbs_data kobject init error %d)\n", ret); + + kobject_put(&dbs_data->attr_set.kobj); + + policy->governor_data = NULL; + + if (!have_governor_per_policy()) + gov->gdbs_data = NULL; + gov->exit(dbs_data); + kfree(dbs_data); + +free_policy_dbs_info: + free_policy_dbs_info(policy_dbs, gov); + +out: + mutex_unlock(&gov_dbs_data_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_init); + +void cpufreq_dbs_governor_exit(struct cpufreq_policy *policy) +{ + struct dbs_governor *gov = dbs_governor_of(policy); + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + unsigned int count; + + /* Protect gov->gdbs_data against concurrent updates. */ + mutex_lock(&gov_dbs_data_mutex); + + count = gov_attr_set_put(&dbs_data->attr_set, &policy_dbs->list); + + policy->governor_data = NULL; + + if (!count && !have_governor_per_policy()) + gov->gdbs_data = NULL; + + free_policy_dbs_info(policy_dbs, gov); + + mutex_unlock(&gov_dbs_data_mutex); +} +EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_exit); + +int cpufreq_dbs_governor_start(struct cpufreq_policy *policy) +{ + struct dbs_governor *gov = dbs_governor_of(policy); + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + unsigned int sampling_rate, ignore_nice, j; + unsigned int io_busy; + + if (!policy->cur) + return -EINVAL; + + policy_dbs->is_shared = policy_is_shared(policy); + policy_dbs->rate_mult = 1; + + sampling_rate = dbs_data->sampling_rate; + ignore_nice = dbs_data->ignore_nice_load; + io_busy = dbs_data->io_is_busy; + + for_each_cpu(j, policy->cpus) { + struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j); + + j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, io_busy); + /* + * Make the first invocation of dbs_update() compute the load. + */ + j_cdbs->prev_load = 0; + + if (ignore_nice) + j_cdbs->prev_cpu_nice = kcpustat_field(&kcpustat_cpu(j), CPUTIME_NICE, j); + } + + gov->start(policy); + + gov_set_update_util(policy_dbs, sampling_rate); + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_start); + +void cpufreq_dbs_governor_stop(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + + gov_clear_update_util(policy_dbs->policy); + irq_work_sync(&policy_dbs->irq_work); + cancel_work_sync(&policy_dbs->work); + atomic_set(&policy_dbs->work_count, 0); + policy_dbs->work_in_progress = false; +} +EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_stop); + +void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs; + + /* Protect gov->gdbs_data against cpufreq_dbs_governor_exit() */ + mutex_lock(&gov_dbs_data_mutex); + policy_dbs = policy->governor_data; + if (!policy_dbs) + goto out; + + mutex_lock(&policy_dbs->update_mutex); + cpufreq_policy_apply_limits(policy); + gov_update_sample_delay(policy_dbs, 0); + mutex_unlock(&policy_dbs->update_mutex); + +out: + mutex_unlock(&gov_dbs_data_mutex); +} +EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_limits); diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h new file mode 100644 index 000000000..168c23fd7 --- /dev/null +++ b/drivers/cpufreq/cpufreq_governor.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * drivers/cpufreq/cpufreq_governor.h + * + * Header file for CPUFreq governors common code + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * (C) 2003 Jun Nakajima <jun.nakajima@intel.com> + * (C) 2009 Alexander Clouter <alex@digriz.org.uk> + * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org> + */ + +#ifndef _CPUFREQ_GOVERNOR_H +#define _CPUFREQ_GOVERNOR_H + +#include <linux/atomic.h> +#include <linux/irq_work.h> +#include <linux/cpufreq.h> +#include <linux/sched/cpufreq.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/mutex.h> + +/* Ondemand Sampling types */ +enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE}; + +/* + * Abbreviations: + * dbs: used as a shortform for demand based switching It helps to keep variable + * names smaller, simpler + * cdbs: common dbs + * od_*: On-demand governor + * cs_*: Conservative governor + */ + +/* Governor demand based switching data (per-policy or global). */ +struct dbs_data { + struct gov_attr_set attr_set; + struct dbs_governor *gov; + void *tuners; + unsigned int ignore_nice_load; + unsigned int sampling_rate; + unsigned int sampling_down_factor; + unsigned int up_threshold; + unsigned int io_is_busy; +}; + +static inline struct dbs_data *to_dbs_data(struct gov_attr_set *attr_set) +{ + return container_of(attr_set, struct dbs_data, attr_set); +} + +#define gov_show_one(_gov, file_name) \ +static ssize_t file_name##_show \ +(struct gov_attr_set *attr_set, char *buf) \ +{ \ + struct dbs_data *dbs_data = to_dbs_data(attr_set); \ + struct _gov##_dbs_tuners *tuners = dbs_data->tuners; \ + return sprintf(buf, "%u\n", tuners->file_name); \ +} + +#define gov_show_one_common(file_name) \ +static ssize_t file_name##_show \ +(struct gov_attr_set *attr_set, char *buf) \ +{ \ + struct dbs_data *dbs_data = to_dbs_data(attr_set); \ + return sprintf(buf, "%u\n", dbs_data->file_name); \ +} + +#define gov_attr_ro(_name) \ +static struct governor_attr _name = __ATTR_RO(_name) + +#define gov_attr_rw(_name) \ +static struct governor_attr _name = __ATTR_RW(_name) + +/* Common to all CPUs of a policy */ +struct policy_dbs_info { + struct cpufreq_policy *policy; + /* + * Per policy mutex that serializes load evaluation from limit-change + * and work-handler. + */ + struct mutex update_mutex; + + u64 last_sample_time; + s64 sample_delay_ns; + atomic_t work_count; + struct irq_work irq_work; + struct work_struct work; + /* dbs_data may be shared between multiple policy objects */ + struct dbs_data *dbs_data; + struct list_head list; + /* Multiplier for increasing sample delay temporarily. */ + unsigned int rate_mult; + unsigned int idle_periods; /* For conservative */ + /* Status indicators */ + bool is_shared; /* This object is used by multiple CPUs */ + bool work_in_progress; /* Work is being queued up or in progress */ +}; + +static inline void gov_update_sample_delay(struct policy_dbs_info *policy_dbs, + unsigned int delay_us) +{ + policy_dbs->sample_delay_ns = delay_us * NSEC_PER_USEC; +} + +/* Per cpu structures */ +struct cpu_dbs_info { + u64 prev_cpu_idle; + u64 prev_update_time; + u64 prev_cpu_nice; + /* + * Used to keep track of load in the previous interval. However, when + * explicitly set to zero, it is used as a flag to ensure that we copy + * the previous load to the current interval only once, upon the first + * wake-up from idle. + */ + unsigned int prev_load; + struct update_util_data update_util; + struct policy_dbs_info *policy_dbs; +}; + +/* Common Governor data across policies */ +struct dbs_governor { + struct cpufreq_governor gov; + struct kobj_type kobj_type; + + /* + * Common data for platforms that don't set + * CPUFREQ_HAVE_GOVERNOR_PER_POLICY + */ + struct dbs_data *gdbs_data; + + unsigned int (*gov_dbs_update)(struct cpufreq_policy *policy); + struct policy_dbs_info *(*alloc)(void); + void (*free)(struct policy_dbs_info *policy_dbs); + int (*init)(struct dbs_data *dbs_data); + void (*exit)(struct dbs_data *dbs_data); + void (*start)(struct cpufreq_policy *policy); +}; + +static inline struct dbs_governor *dbs_governor_of(struct cpufreq_policy *policy) +{ + return container_of(policy->governor, struct dbs_governor, gov); +} + +/* Governor callback routines */ +int cpufreq_dbs_governor_init(struct cpufreq_policy *policy); +void cpufreq_dbs_governor_exit(struct cpufreq_policy *policy); +int cpufreq_dbs_governor_start(struct cpufreq_policy *policy); +void cpufreq_dbs_governor_stop(struct cpufreq_policy *policy); +void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy); + +#define CPUFREQ_DBS_GOVERNOR_INITIALIZER(_name_) \ + { \ + .name = _name_, \ + .flags = CPUFREQ_GOV_DYNAMIC_SWITCHING, \ + .owner = THIS_MODULE, \ + .init = cpufreq_dbs_governor_init, \ + .exit = cpufreq_dbs_governor_exit, \ + .start = cpufreq_dbs_governor_start, \ + .stop = cpufreq_dbs_governor_stop, \ + .limits = cpufreq_dbs_governor_limits, \ + } + +/* Governor specific operations */ +struct od_ops { + unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy, + unsigned int freq_next, unsigned int relation); +}; + +unsigned int dbs_update(struct cpufreq_policy *policy); +void od_register_powersave_bias_handler(unsigned int (*f) + (struct cpufreq_policy *, unsigned int, unsigned int), + unsigned int powersave_bias); +void od_unregister_powersave_bias_handler(void); +ssize_t sampling_rate_store(struct gov_attr_set *attr_set, const char *buf, + size_t count); +void gov_update_cpu_data(struct dbs_data *dbs_data); +#endif /* _CPUFREQ_GOVERNOR_H */ diff --git a/drivers/cpufreq/cpufreq_governor_attr_set.c b/drivers/cpufreq/cpufreq_governor_attr_set.c new file mode 100644 index 000000000..771770ea0 --- /dev/null +++ b/drivers/cpufreq/cpufreq_governor_attr_set.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abstract code for CPUFreq governor tunable sysfs attributes. + * + * Copyright (C) 2016, Intel Corporation + * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + */ + +#include "cpufreq_governor.h" + +static inline struct governor_attr *to_gov_attr(struct attribute *attr) +{ + return container_of(attr, struct governor_attr, attr); +} + +static ssize_t governor_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct governor_attr *gattr = to_gov_attr(attr); + + return gattr->show(to_gov_attr_set(kobj), buf); +} + +static ssize_t governor_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct gov_attr_set *attr_set = to_gov_attr_set(kobj); + struct governor_attr *gattr = to_gov_attr(attr); + int ret; + + mutex_lock(&attr_set->update_lock); + ret = attr_set->usage_count ? gattr->store(attr_set, buf, count) : -EBUSY; + mutex_unlock(&attr_set->update_lock); + return ret; +} + +const struct sysfs_ops governor_sysfs_ops = { + .show = governor_show, + .store = governor_store, +}; +EXPORT_SYMBOL_GPL(governor_sysfs_ops); + +void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node) +{ + INIT_LIST_HEAD(&attr_set->policy_list); + mutex_init(&attr_set->update_lock); + attr_set->usage_count = 1; + list_add(list_node, &attr_set->policy_list); +} +EXPORT_SYMBOL_GPL(gov_attr_set_init); + +void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node) +{ + mutex_lock(&attr_set->update_lock); + attr_set->usage_count++; + list_add(list_node, &attr_set->policy_list); + mutex_unlock(&attr_set->update_lock); +} +EXPORT_SYMBOL_GPL(gov_attr_set_get); + +unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node) +{ + unsigned int count; + + mutex_lock(&attr_set->update_lock); + list_del(list_node); + count = --attr_set->usage_count; + mutex_unlock(&attr_set->update_lock); + if (count) + return count; + + mutex_destroy(&attr_set->update_lock); + kobject_put(&attr_set->kobj); + return 0; +} +EXPORT_SYMBOL_GPL(gov_attr_set_put); diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c new file mode 100644 index 000000000..c52d19d67 --- /dev/null +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -0,0 +1,486 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * drivers/cpufreq/cpufreq_ondemand.c + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * Jun Nakajima <jun.nakajima@intel.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpu.h> +#include <linux/percpu-defs.h> +#include <linux/slab.h> +#include <linux/tick.h> +#include <linux/sched/cpufreq.h> + +#include "cpufreq_ondemand.h" + +/* On-demand governor macros */ +#define DEF_FREQUENCY_UP_THRESHOLD (80) +#define DEF_SAMPLING_DOWN_FACTOR (1) +#define MAX_SAMPLING_DOWN_FACTOR (100000) +#define MICRO_FREQUENCY_UP_THRESHOLD (95) +#define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000) +#define MIN_FREQUENCY_UP_THRESHOLD (1) +#define MAX_FREQUENCY_UP_THRESHOLD (100) + +static struct od_ops od_ops; + +static unsigned int default_powersave_bias; + +/* + * Not all CPUs want IO time to be accounted as busy; this depends on how + * efficient idling at a higher frequency/voltage is. + * Pavel Machek says this is not so for various generations of AMD and old + * Intel systems. + * Mike Chan (android.com) claims this is also not true for ARM. + * Because of this, whitelist specific known (series) of CPUs by default, and + * leave all others up to the user. + */ +static int should_io_be_busy(void) +{ +#if defined(CONFIG_X86) + /* + * For Intel, Core 2 (model 15) and later have an efficient idle. + */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model >= 15) + return 1; +#endif + return 0; +} + +/* + * Find right freq to be set now with powersave_bias on. + * Returns the freq_hi to be used right now and will set freq_hi_delay_us, + * freq_lo, and freq_lo_delay_us in percpu area for averaging freqs. + */ +static unsigned int generic_powersave_bias_target(struct cpufreq_policy *policy, + unsigned int freq_next, unsigned int relation) +{ + unsigned int freq_req, freq_reduc, freq_avg; + unsigned int freq_hi, freq_lo; + unsigned int index; + unsigned int delay_hi_us; + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + struct cpufreq_frequency_table *freq_table = policy->freq_table; + + if (!freq_table) { + dbs_info->freq_lo = 0; + dbs_info->freq_lo_delay_us = 0; + return freq_next; + } + + index = cpufreq_frequency_table_target(policy, freq_next, relation); + freq_req = freq_table[index].frequency; + freq_reduc = freq_req * od_tuners->powersave_bias / 1000; + freq_avg = freq_req - freq_reduc; + + /* Find freq bounds for freq_avg in freq_table */ + index = cpufreq_table_find_index_h(policy, freq_avg, + relation & CPUFREQ_RELATION_E); + freq_lo = freq_table[index].frequency; + index = cpufreq_table_find_index_l(policy, freq_avg, + relation & CPUFREQ_RELATION_E); + freq_hi = freq_table[index].frequency; + + /* Find out how long we have to be in hi and lo freqs */ + if (freq_hi == freq_lo) { + dbs_info->freq_lo = 0; + dbs_info->freq_lo_delay_us = 0; + return freq_lo; + } + delay_hi_us = (freq_avg - freq_lo) * dbs_data->sampling_rate; + delay_hi_us += (freq_hi - freq_lo) / 2; + delay_hi_us /= freq_hi - freq_lo; + dbs_info->freq_hi_delay_us = delay_hi_us; + dbs_info->freq_lo = freq_lo; + dbs_info->freq_lo_delay_us = dbs_data->sampling_rate - delay_hi_us; + return freq_hi; +} + +static void ondemand_powersave_bias_init(struct cpufreq_policy *policy) +{ + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); + + dbs_info->freq_lo = 0; +} + +static void dbs_freq_increase(struct cpufreq_policy *policy, unsigned int freq) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + + if (od_tuners->powersave_bias) + freq = od_ops.powersave_bias_target(policy, freq, + CPUFREQ_RELATION_HE); + else if (policy->cur == policy->max) + return; + + __cpufreq_driver_target(policy, freq, od_tuners->powersave_bias ? + CPUFREQ_RELATION_LE : CPUFREQ_RELATION_HE); +} + +/* + * Every sampling_rate, we check, if current idle time is less than 20% + * (default), then we try to increase frequency. Else, we adjust the frequency + * proportional to load. + */ +static void od_update(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + unsigned int load = dbs_update(policy); + + dbs_info->freq_lo = 0; + + /* Check for frequency increase */ + if (load > dbs_data->up_threshold) { + /* If switching to max speed, apply sampling_down_factor */ + if (policy->cur < policy->max) + policy_dbs->rate_mult = dbs_data->sampling_down_factor; + dbs_freq_increase(policy, policy->max); + } else { + /* Calculate the next frequency proportional to load */ + unsigned int freq_next, min_f, max_f; + + min_f = policy->cpuinfo.min_freq; + max_f = policy->cpuinfo.max_freq; + freq_next = min_f + load * (max_f - min_f) / 100; + + /* No longer fully busy, reset rate_mult */ + policy_dbs->rate_mult = 1; + + if (od_tuners->powersave_bias) + freq_next = od_ops.powersave_bias_target(policy, + freq_next, + CPUFREQ_RELATION_LE); + + __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_CE); + } +} + +static unsigned int od_dbs_update(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); + int sample_type = dbs_info->sample_type; + + /* Common NORMAL_SAMPLE setup */ + dbs_info->sample_type = OD_NORMAL_SAMPLE; + /* + * OD_SUB_SAMPLE doesn't make sense if sample_delay_ns is 0, so ignore + * it then. + */ + if (sample_type == OD_SUB_SAMPLE && policy_dbs->sample_delay_ns > 0) { + __cpufreq_driver_target(policy, dbs_info->freq_lo, + CPUFREQ_RELATION_HE); + return dbs_info->freq_lo_delay_us; + } + + od_update(policy); + + if (dbs_info->freq_lo) { + /* Setup SUB_SAMPLE */ + dbs_info->sample_type = OD_SUB_SAMPLE; + return dbs_info->freq_hi_delay_us; + } + + return dbs_data->sampling_rate * policy_dbs->rate_mult; +} + +/************************** sysfs interface ************************/ +static struct dbs_governor od_dbs_gov; + +static ssize_t io_is_busy_store(struct gov_attr_set *attr_set, const char *buf, + size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + dbs_data->io_is_busy = !!input; + + /* we need to re-evaluate prev_cpu_idle */ + gov_update_cpu_data(dbs_data); + + return count; +} + +static ssize_t up_threshold_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || + input < MIN_FREQUENCY_UP_THRESHOLD) { + return -EINVAL; + } + + dbs_data->up_threshold = input; + return count; +} + +static ssize_t sampling_down_factor_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct policy_dbs_info *policy_dbs; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) + return -EINVAL; + + dbs_data->sampling_down_factor = input; + + /* Reset down sampling multiplier in case it was active */ + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { + /* + * Doing this without locking might lead to using different + * rate_mult values in od_update() and od_dbs_update(). + */ + mutex_lock(&policy_dbs->update_mutex); + policy_dbs->rate_mult = 1; + mutex_unlock(&policy_dbs->update_mutex); + } + + return count; +} + +static ssize_t ignore_nice_load_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + if (input > 1) + input = 1; + + if (input == dbs_data->ignore_nice_load) { /* nothing to do */ + return count; + } + dbs_data->ignore_nice_load = input; + + /* we need to re-evaluate prev_cpu_idle */ + gov_update_cpu_data(dbs_data); + + return count; +} + +static ssize_t powersave_bias_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + struct policy_dbs_info *policy_dbs; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1) + return -EINVAL; + + if (input > 1000) + input = 1000; + + od_tuners->powersave_bias = input; + + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) + ondemand_powersave_bias_init(policy_dbs->policy); + + return count; +} + +gov_show_one_common(sampling_rate); +gov_show_one_common(up_threshold); +gov_show_one_common(sampling_down_factor); +gov_show_one_common(ignore_nice_load); +gov_show_one_common(io_is_busy); +gov_show_one(od, powersave_bias); + +gov_attr_rw(sampling_rate); +gov_attr_rw(io_is_busy); +gov_attr_rw(up_threshold); +gov_attr_rw(sampling_down_factor); +gov_attr_rw(ignore_nice_load); +gov_attr_rw(powersave_bias); + +static struct attribute *od_attrs[] = { + &sampling_rate.attr, + &up_threshold.attr, + &sampling_down_factor.attr, + &ignore_nice_load.attr, + &powersave_bias.attr, + &io_is_busy.attr, + NULL +}; +ATTRIBUTE_GROUPS(od); + +/************************** sysfs end ************************/ + +static struct policy_dbs_info *od_alloc(void) +{ + struct od_policy_dbs_info *dbs_info; + + dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL); + return dbs_info ? &dbs_info->policy_dbs : NULL; +} + +static void od_free(struct policy_dbs_info *policy_dbs) +{ + kfree(to_dbs_info(policy_dbs)); +} + +static int od_init(struct dbs_data *dbs_data) +{ + struct od_dbs_tuners *tuners; + u64 idle_time; + int cpu; + + tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); + if (!tuners) + return -ENOMEM; + + cpu = get_cpu(); + idle_time = get_cpu_idle_time_us(cpu, NULL); + put_cpu(); + if (idle_time != -1ULL) { + /* Idle micro accounting is supported. Use finer thresholds */ + dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; + } else { + dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; + } + + dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; + dbs_data->ignore_nice_load = 0; + tuners->powersave_bias = default_powersave_bias; + dbs_data->io_is_busy = should_io_be_busy(); + + dbs_data->tuners = tuners; + return 0; +} + +static void od_exit(struct dbs_data *dbs_data) +{ + kfree(dbs_data->tuners); +} + +static void od_start(struct cpufreq_policy *policy) +{ + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); + + dbs_info->sample_type = OD_NORMAL_SAMPLE; + ondemand_powersave_bias_init(policy); +} + +static struct od_ops od_ops = { + .powersave_bias_target = generic_powersave_bias_target, +}; + +static struct dbs_governor od_dbs_gov = { + .gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"), + .kobj_type = { .default_groups = od_groups }, + .gov_dbs_update = od_dbs_update, + .alloc = od_alloc, + .free = od_free, + .init = od_init, + .exit = od_exit, + .start = od_start, +}; + +#define CPU_FREQ_GOV_ONDEMAND (od_dbs_gov.gov) + +static void od_set_powersave_bias(unsigned int powersave_bias) +{ + unsigned int cpu; + cpumask_var_t done; + + if (!alloc_cpumask_var(&done, GFP_KERNEL)) + return; + + default_powersave_bias = powersave_bias; + cpumask_clear(done); + + cpus_read_lock(); + for_each_online_cpu(cpu) { + struct cpufreq_policy *policy; + struct policy_dbs_info *policy_dbs; + struct dbs_data *dbs_data; + struct od_dbs_tuners *od_tuners; + + if (cpumask_test_cpu(cpu, done)) + continue; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy || policy->governor != &CPU_FREQ_GOV_ONDEMAND) + continue; + + policy_dbs = policy->governor_data; + if (!policy_dbs) + continue; + + cpumask_or(done, done, policy->cpus); + + dbs_data = policy_dbs->dbs_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; + } + cpus_read_unlock(); + + free_cpumask_var(done); +} + +void od_register_powersave_bias_handler(unsigned int (*f) + (struct cpufreq_policy *, unsigned int, unsigned int), + unsigned int powersave_bias) +{ + od_ops.powersave_bias_target = f; + od_set_powersave_bias(powersave_bias); +} +EXPORT_SYMBOL_GPL(od_register_powersave_bias_handler); + +void od_unregister_powersave_bias_handler(void) +{ + od_ops.powersave_bias_target = generic_powersave_bias_target; + od_set_powersave_bias(0); +} +EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler); + +MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>"); +MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>"); +MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " + "Low Latency Frequency Transition capable processors"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND +struct cpufreq_governor *cpufreq_default_governor(void) +{ + return &CPU_FREQ_GOV_ONDEMAND; +} +#endif + +cpufreq_governor_init(CPU_FREQ_GOV_ONDEMAND); +cpufreq_governor_exit(CPU_FREQ_GOV_ONDEMAND); diff --git a/drivers/cpufreq/cpufreq_ondemand.h b/drivers/cpufreq/cpufreq_ondemand.h new file mode 100644 index 000000000..1af8e5c4b --- /dev/null +++ b/drivers/cpufreq/cpufreq_ondemand.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Header file for CPUFreq ondemand governor and related code. + * + * Copyright (C) 2016, Intel Corporation + * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + */ + +#include "cpufreq_governor.h" + +struct od_policy_dbs_info { + struct policy_dbs_info policy_dbs; + unsigned int freq_lo; + unsigned int freq_lo_delay_us; + unsigned int freq_hi_delay_us; + unsigned int sample_type:1; +}; + +static inline struct od_policy_dbs_info *to_dbs_info(struct policy_dbs_info *policy_dbs) +{ + return container_of(policy_dbs, struct od_policy_dbs_info, policy_dbs); +} + +struct od_dbs_tuners { + unsigned int powersave_bias; +}; diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c new file mode 100644 index 000000000..addd93f2a --- /dev/null +++ b/drivers/cpufreq/cpufreq_performance.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/cpufreq/cpufreq_performance.c + * + * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/module.h> + +static void cpufreq_gov_performance_limits(struct cpufreq_policy *policy) +{ + pr_debug("setting to %u kHz\n", policy->max); + __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); +} + +static struct cpufreq_governor cpufreq_gov_performance = { + .name = "performance", + .owner = THIS_MODULE, + .flags = CPUFREQ_GOV_STRICT_TARGET, + .limits = cpufreq_gov_performance_limits, +}; + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE +struct cpufreq_governor *cpufreq_default_governor(void) +{ + return &cpufreq_gov_performance; +} +#endif +#ifndef CONFIG_CPU_FREQ_GOV_PERFORMANCE_MODULE +struct cpufreq_governor *cpufreq_fallback_governor(void) +{ + return &cpufreq_gov_performance; +} +#endif + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("CPUfreq policy governor 'performance'"); +MODULE_LICENSE("GPL"); + +cpufreq_governor_init(cpufreq_gov_performance); +cpufreq_governor_exit(cpufreq_gov_performance); diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c new file mode 100644 index 000000000..8d830d860 --- /dev/null +++ b/drivers/cpufreq/cpufreq_powersave.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/cpufreq/cpufreq_powersave.c + * + * Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/module.h> + +static void cpufreq_gov_powersave_limits(struct cpufreq_policy *policy) +{ + pr_debug("setting to %u kHz\n", policy->min); + __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); +} + +static struct cpufreq_governor cpufreq_gov_powersave = { + .name = "powersave", + .limits = cpufreq_gov_powersave_limits, + .owner = THIS_MODULE, + .flags = CPUFREQ_GOV_STRICT_TARGET, +}; + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("CPUfreq policy governor 'powersave'"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE +struct cpufreq_governor *cpufreq_default_governor(void) +{ + return &cpufreq_gov_powersave; +} +#endif + +cpufreq_governor_init(cpufreq_gov_powersave); +cpufreq_governor_exit(cpufreq_gov_powersave); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c new file mode 100644 index 000000000..6e57df7a2 --- /dev/null +++ b/drivers/cpufreq/cpufreq_stats.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * drivers/cpufreq/cpufreq_stats.c + * + * Copyright (C) 2003-2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * (C) 2004 Zou Nan hai <nanhai.zou@intel.com>. + */ + +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/sched/clock.h> +#include <linux/slab.h> + +struct cpufreq_stats { + unsigned int total_trans; + unsigned long long last_time; + unsigned int max_state; + unsigned int state_num; + unsigned int last_index; + u64 *time_in_state; + unsigned int *freq_table; + unsigned int *trans_table; + + /* Deferred reset */ + unsigned int reset_pending; + unsigned long long reset_time; +}; + +static void cpufreq_stats_update(struct cpufreq_stats *stats, + unsigned long long time) +{ + unsigned long long cur_time = local_clock(); + + stats->time_in_state[stats->last_index] += cur_time - time; + stats->last_time = cur_time; +} + +static void cpufreq_stats_reset_table(struct cpufreq_stats *stats) +{ + unsigned int count = stats->max_state; + + memset(stats->time_in_state, 0, count * sizeof(u64)); + memset(stats->trans_table, 0, count * count * sizeof(int)); + stats->last_time = local_clock(); + stats->total_trans = 0; + + /* Adjust for the time elapsed since reset was requested */ + WRITE_ONCE(stats->reset_pending, 0); + /* + * Prevent the reset_time read from being reordered before the + * reset_pending accesses in cpufreq_stats_record_transition(). + */ + smp_rmb(); + cpufreq_stats_update(stats, READ_ONCE(stats->reset_time)); +} + +static ssize_t show_total_trans(struct cpufreq_policy *policy, char *buf) +{ + struct cpufreq_stats *stats = policy->stats; + + if (READ_ONCE(stats->reset_pending)) + return sprintf(buf, "%d\n", 0); + else + return sprintf(buf, "%u\n", stats->total_trans); +} +cpufreq_freq_attr_ro(total_trans); + +static ssize_t show_time_in_state(struct cpufreq_policy *policy, char *buf) +{ + struct cpufreq_stats *stats = policy->stats; + bool pending = READ_ONCE(stats->reset_pending); + unsigned long long time; + ssize_t len = 0; + int i; + + for (i = 0; i < stats->state_num; i++) { + if (pending) { + if (i == stats->last_index) { + /* + * Prevent the reset_time read from occurring + * before the reset_pending read above. + */ + smp_rmb(); + time = local_clock() - READ_ONCE(stats->reset_time); + } else { + time = 0; + } + } else { + time = stats->time_in_state[i]; + if (i == stats->last_index) + time += local_clock() - stats->last_time; + } + + len += sprintf(buf + len, "%u %llu\n", stats->freq_table[i], + nsec_to_clock_t(time)); + } + return len; +} +cpufreq_freq_attr_ro(time_in_state); + +/* We don't care what is written to the attribute */ +static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf, + size_t count) +{ + struct cpufreq_stats *stats = policy->stats; + + /* + * Defer resetting of stats to cpufreq_stats_record_transition() to + * avoid races. + */ + WRITE_ONCE(stats->reset_time, local_clock()); + /* + * The memory barrier below is to prevent the readers of reset_time from + * seeing a stale or partially updated value. + */ + smp_wmb(); + WRITE_ONCE(stats->reset_pending, 1); + + return count; +} +cpufreq_freq_attr_wo(reset); + +static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) +{ + struct cpufreq_stats *stats = policy->stats; + bool pending = READ_ONCE(stats->reset_pending); + ssize_t len = 0; + int i, j, count; + + len += scnprintf(buf + len, PAGE_SIZE - len, " From : To\n"); + len += scnprintf(buf + len, PAGE_SIZE - len, " : "); + for (i = 0; i < stats->state_num; i++) { + if (len >= PAGE_SIZE - 1) + break; + len += scnprintf(buf + len, PAGE_SIZE - len, "%9u ", + stats->freq_table[i]); + } + if (len >= PAGE_SIZE - 1) + return PAGE_SIZE - 1; + + len += scnprintf(buf + len, PAGE_SIZE - len, "\n"); + + for (i = 0; i < stats->state_num; i++) { + if (len >= PAGE_SIZE - 1) + break; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%9u: ", + stats->freq_table[i]); + + for (j = 0; j < stats->state_num; j++) { + if (len >= PAGE_SIZE - 1) + break; + + if (pending) + count = 0; + else + count = stats->trans_table[i * stats->max_state + j]; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%9u ", count); + } + if (len >= PAGE_SIZE - 1) + break; + len += scnprintf(buf + len, PAGE_SIZE - len, "\n"); + } + + if (len >= PAGE_SIZE - 1) { + pr_warn_once("cpufreq transition table exceeds PAGE_SIZE. Disabling\n"); + return -EFBIG; + } + return len; +} +cpufreq_freq_attr_ro(trans_table); + +static struct attribute *default_attrs[] = { + &total_trans.attr, + &time_in_state.attr, + &reset.attr, + &trans_table.attr, + NULL +}; +static const struct attribute_group stats_attr_group = { + .attrs = default_attrs, + .name = "stats" +}; + +static int freq_table_get_index(struct cpufreq_stats *stats, unsigned int freq) +{ + int index; + for (index = 0; index < stats->max_state; index++) + if (stats->freq_table[index] == freq) + return index; + return -1; +} + +void cpufreq_stats_free_table(struct cpufreq_policy *policy) +{ + struct cpufreq_stats *stats = policy->stats; + + /* Already freed */ + if (!stats) + return; + + pr_debug("%s: Free stats table\n", __func__); + + sysfs_remove_group(&policy->kobj, &stats_attr_group); + kfree(stats->time_in_state); + kfree(stats); + policy->stats = NULL; +} + +void cpufreq_stats_create_table(struct cpufreq_policy *policy) +{ + unsigned int i = 0, count; + struct cpufreq_stats *stats; + unsigned int alloc_size; + struct cpufreq_frequency_table *pos; + + count = cpufreq_table_count_valid_entries(policy); + if (!count) + return; + + /* stats already initialized */ + if (policy->stats) + return; + + stats = kzalloc(sizeof(*stats), GFP_KERNEL); + if (!stats) + return; + + alloc_size = count * sizeof(int) + count * sizeof(u64); + + alloc_size += count * count * sizeof(int); + + /* Allocate memory for time_in_state/freq_table/trans_table in one go */ + stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL); + if (!stats->time_in_state) + goto free_stat; + + stats->freq_table = (unsigned int *)(stats->time_in_state + count); + + stats->trans_table = stats->freq_table + count; + + stats->max_state = count; + + /* Find valid-unique entries */ + cpufreq_for_each_valid_entry(pos, policy->freq_table) + if (freq_table_get_index(stats, pos->frequency) == -1) + stats->freq_table[i++] = pos->frequency; + + stats->state_num = i; + stats->last_time = local_clock(); + stats->last_index = freq_table_get_index(stats, policy->cur); + + policy->stats = stats; + if (!sysfs_create_group(&policy->kobj, &stats_attr_group)) + return; + + /* We failed, release resources */ + policy->stats = NULL; + kfree(stats->time_in_state); +free_stat: + kfree(stats); +} + +void cpufreq_stats_record_transition(struct cpufreq_policy *policy, + unsigned int new_freq) +{ + struct cpufreq_stats *stats = policy->stats; + int old_index, new_index; + + if (unlikely(!stats)) + return; + + if (unlikely(READ_ONCE(stats->reset_pending))) + cpufreq_stats_reset_table(stats); + + old_index = stats->last_index; + new_index = freq_table_get_index(stats, new_freq); + + /* We can't do stats->time_in_state[-1]= .. */ + if (unlikely(old_index == -1 || new_index == -1 || old_index == new_index)) + return; + + cpufreq_stats_update(stats, stats->last_time); + + stats->last_index = new_index; + stats->trans_table[old_index * stats->max_state + new_index]++; + stats->total_trans++; +} diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c new file mode 100644 index 000000000..50a4d7846 --- /dev/null +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * linux/drivers/cpufreq/cpufreq_userspace.c + * + * Copyright (C) 2001 Russell King + * (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +static DEFINE_PER_CPU(unsigned int, cpu_is_managed); +static DEFINE_MUTEX(userspace_mutex); + +/** + * cpufreq_set - set the CPU frequency + * @policy: pointer to policy struct where freq is being set + * @freq: target frequency in kHz + * + * Sets the CPU frequency to freq. + */ +static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) +{ + int ret = -EINVAL; + unsigned int *setspeed = policy->governor_data; + + pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq); + + mutex_lock(&userspace_mutex); + if (!per_cpu(cpu_is_managed, policy->cpu)) + goto err; + + *setspeed = freq; + + ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L); + err: + mutex_unlock(&userspace_mutex); + return ret; +} + +static ssize_t show_speed(struct cpufreq_policy *policy, char *buf) +{ + return sprintf(buf, "%u\n", policy->cur); +} + +static int cpufreq_userspace_policy_init(struct cpufreq_policy *policy) +{ + unsigned int *setspeed; + + setspeed = kzalloc(sizeof(*setspeed), GFP_KERNEL); + if (!setspeed) + return -ENOMEM; + + policy->governor_data = setspeed; + return 0; +} + +static void cpufreq_userspace_policy_exit(struct cpufreq_policy *policy) +{ + mutex_lock(&userspace_mutex); + kfree(policy->governor_data); + policy->governor_data = NULL; + mutex_unlock(&userspace_mutex); +} + +static int cpufreq_userspace_policy_start(struct cpufreq_policy *policy) +{ + unsigned int *setspeed = policy->governor_data; + + BUG_ON(!policy->cur); + pr_debug("started managing cpu %u\n", policy->cpu); + + mutex_lock(&userspace_mutex); + per_cpu(cpu_is_managed, policy->cpu) = 1; + *setspeed = policy->cur; + mutex_unlock(&userspace_mutex); + return 0; +} + +static void cpufreq_userspace_policy_stop(struct cpufreq_policy *policy) +{ + unsigned int *setspeed = policy->governor_data; + + pr_debug("managing cpu %u stopped\n", policy->cpu); + + mutex_lock(&userspace_mutex); + per_cpu(cpu_is_managed, policy->cpu) = 0; + *setspeed = 0; + mutex_unlock(&userspace_mutex); +} + +static void cpufreq_userspace_policy_limits(struct cpufreq_policy *policy) +{ + unsigned int *setspeed = policy->governor_data; + + mutex_lock(&userspace_mutex); + + pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n", + policy->cpu, policy->min, policy->max, policy->cur, *setspeed); + + if (policy->max < *setspeed) + __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); + else if (policy->min > *setspeed) + __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L); + else + __cpufreq_driver_target(policy, *setspeed, CPUFREQ_RELATION_L); + + mutex_unlock(&userspace_mutex); +} + +static struct cpufreq_governor cpufreq_gov_userspace = { + .name = "userspace", + .init = cpufreq_userspace_policy_init, + .exit = cpufreq_userspace_policy_exit, + .start = cpufreq_userspace_policy_start, + .stop = cpufreq_userspace_policy_stop, + .limits = cpufreq_userspace_policy_limits, + .store_setspeed = cpufreq_set, + .show_setspeed = show_speed, + .owner = THIS_MODULE, +}; + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>, " + "Russell King <rmk@arm.linux.org.uk>"); +MODULE_DESCRIPTION("CPUfreq policy governor 'userspace'"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE +struct cpufreq_governor *cpufreq_default_governor(void) +{ + return &cpufreq_gov_userspace; +} +#endif + +cpufreq_governor_init(cpufreq_gov_userspace); +cpufreq_governor_exit(cpufreq_gov_userspace); diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c new file mode 100644 index 000000000..ebb3a8102 --- /dev/null +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CPU frequency scaling for DaVinci + * + * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/ + * + * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King + * + * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Updated to support OMAP3 + * Rajendra Nayak <rnayak@ti.com> + */ +#include <linux/types.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/platform_data/davinci-cpufreq.h> +#include <linux/platform_device.h> +#include <linux/export.h> + +struct davinci_cpufreq { + struct device *dev; + struct clk *armclk; + struct clk *asyncclk; + unsigned long asyncrate; +}; +static struct davinci_cpufreq cpufreq; + +static int davinci_target(struct cpufreq_policy *policy, unsigned int idx) +{ + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct clk *armclk = cpufreq.armclk; + unsigned int old_freq, new_freq; + int ret = 0; + + old_freq = policy->cur; + new_freq = pdata->freq_table[idx].frequency; + + /* if moving to higher frequency, up the voltage beforehand */ + if (pdata->set_voltage && new_freq > old_freq) { + ret = pdata->set_voltage(idx); + if (ret) + return ret; + } + + ret = clk_set_rate(armclk, new_freq * 1000); + if (ret) + return ret; + + if (cpufreq.asyncclk) { + ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate); + if (ret) + return ret; + } + + /* if moving to lower freq, lower the voltage after lowering freq */ + if (pdata->set_voltage && new_freq < old_freq) + pdata->set_voltage(idx); + + return 0; +} + +static int davinci_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; + struct cpufreq_frequency_table *freq_table = pdata->freq_table; + + if (policy->cpu != 0) + return -EINVAL; + + /* Finish platform specific initialization */ + if (pdata->init) { + result = pdata->init(); + if (result) + return result; + } + + policy->clk = cpufreq.armclk; + + /* + * Time measurement across the target() function yields ~1500-1800us + * time taken with no drivers on notification list. + * Setting the latency to 2000 us to accommodate addition of drivers + * to pre/post change notification list. + */ + cpufreq_generic_init(policy, freq_table, 2000 * 1000); + return 0; +} + +static struct cpufreq_driver davinci_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = davinci_target, + .get = cpufreq_generic_get, + .init = davinci_cpu_init, + .name = "davinci", + .attr = cpufreq_generic_attr, +}; + +static int __init davinci_cpufreq_probe(struct platform_device *pdev) +{ + struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; + struct clk *asyncclk; + + if (!pdata) + return -EINVAL; + if (!pdata->freq_table) + return -EINVAL; + + cpufreq.dev = &pdev->dev; + + cpufreq.armclk = clk_get(NULL, "arm"); + if (IS_ERR(cpufreq.armclk)) { + dev_err(cpufreq.dev, "Unable to get ARM clock\n"); + return PTR_ERR(cpufreq.armclk); + } + + asyncclk = clk_get(cpufreq.dev, "async"); + if (!IS_ERR(asyncclk)) { + cpufreq.asyncclk = asyncclk; + cpufreq.asyncrate = clk_get_rate(asyncclk); + } + + return cpufreq_register_driver(&davinci_driver); +} + +static int __exit davinci_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&davinci_driver); + + clk_put(cpufreq.armclk); + + if (cpufreq.asyncclk) + clk_put(cpufreq.asyncclk); + + return 0; +} + +static struct platform_driver davinci_cpufreq_driver = { + .driver = { + .name = "cpufreq-davinci", + }, + .remove = __exit_p(davinci_cpufreq_remove), +}; + +int __init davinci_cpufreq_init(void) +{ + return platform_driver_probe(&davinci_cpufreq_driver, + davinci_cpufreq_probe); +} + diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c new file mode 100644 index 000000000..ab93bce8a --- /dev/null +++ b/drivers/cpufreq/e_powersaver.c @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Based on documentation provided by Dave Jones. Thanks! + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/delay.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> +#include <asm/tsc.h> + +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) +#include <linux/acpi.h> +#include <acpi/processor.h> +#endif + +#define EPS_BRAND_C7M 0 +#define EPS_BRAND_C7 1 +#define EPS_BRAND_EDEN 2 +#define EPS_BRAND_C3 3 +#define EPS_BRAND_C7D 4 + +struct eps_cpu_data { + u32 fsb; +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) + u32 bios_limit; +#endif + struct cpufreq_frequency_table freq_table[]; +}; + +static struct eps_cpu_data *eps_cpu[NR_CPUS]; + +/* Module parameters */ +static int freq_failsafe_off; +static int voltage_failsafe_off; +static int set_max_voltage; + +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) +static int ignore_acpi_limit; + +static struct acpi_processor_performance *eps_acpi_cpu_perf; + +/* Minimum necessary to get acpi_processor_get_bios_limit() working */ +static int eps_acpi_init(void) +{ + eps_acpi_cpu_perf = kzalloc(sizeof(*eps_acpi_cpu_perf), + GFP_KERNEL); + if (!eps_acpi_cpu_perf) + return -ENOMEM; + + if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map, + GFP_KERNEL)) { + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + return -ENOMEM; + } + + if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) { + free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map); + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + return -EIO; + } + return 0; +} + +static int eps_acpi_exit(struct cpufreq_policy *policy) +{ + if (eps_acpi_cpu_perf) { + acpi_processor_unregister_performance(0); + free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map); + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + } + return 0; +} +#endif + +static unsigned int eps_get(unsigned int cpu) +{ + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (cpu) + return 0; + centaur = eps_cpu[cpu]; + if (centaur == NULL) + return 0; + + /* Return current frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + return centaur->fsb * ((lo >> 8) & 0xff); +} + +static int eps_set_state(struct eps_cpu_data *centaur, + struct cpufreq_policy *policy, + u32 dest_state) +{ + u32 lo, hi; + int i; + + /* Wait while CPU is busy */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i = 0; + while (lo & ((1 << 16) | (1 << 17))) { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + return -ENODEV; + } + } + /* Set new multiplier and voltage */ + wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); + /* Wait until transition end */ + i = 0; + do { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + return -ENODEV; + } + } while (lo & ((1 << 16) | (1 << 17))); + +#ifdef DEBUG + { + u8 current_multiplier, current_voltage; + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + pr_info("Current multiplier = %d\n", current_multiplier); + } +#endif + return 0; +} + +static int eps_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct eps_cpu_data *centaur; + unsigned int cpu = policy->cpu; + unsigned int dest_state; + int ret; + + if (unlikely(eps_cpu[cpu] == NULL)) + return -ENODEV; + centaur = eps_cpu[cpu]; + + /* Make frequency transition */ + dest_state = centaur->freq_table[index].driver_data & 0xffff; + ret = eps_set_state(centaur, policy, dest_state); + if (ret) + pr_err("Timeout!\n"); + return ret; +} + +static int eps_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + u32 lo, hi; + u64 val; + u8 current_multiplier, current_voltage; + u8 max_multiplier, max_voltage; + u8 min_multiplier, min_voltage; + u8 brand = 0; + u32 fsb; + struct eps_cpu_data *centaur; + struct cpuinfo_x86 *c = &cpu_data(0); + struct cpufreq_frequency_table *f_table; + int k, step, voltage; + int states; +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) + unsigned int limit; +#endif + + if (policy->cpu != 0) + return -ENODEV; + + /* Check brand */ + pr_info("Detected VIA "); + + switch (c->x86_model) { + case 10: + rdmsr(0x1153, lo, hi); + brand = (((lo >> 2) ^ lo) >> 18) & 3; + pr_cont("Model A "); + break; + case 13: + rdmsr(0x1154, lo, hi); + brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff; + pr_cont("Model D "); + break; + } + + switch (brand) { + case EPS_BRAND_C7M: + pr_cont("C7-M\n"); + break; + case EPS_BRAND_C7: + pr_cont("C7\n"); + break; + case EPS_BRAND_EDEN: + pr_cont("Eden\n"); + break; + case EPS_BRAND_C7D: + pr_cont("C7-D\n"); + break; + case EPS_BRAND_C3: + pr_cont("C3\n"); + return -ENODEV; + } + /* Enable Enhanced PowerSaver */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; + wrmsrl(MSR_IA32_MISC_ENABLE, val); + /* Can be locked at 0 */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + pr_info("Can't enable Enhanced PowerSaver\n"); + return -ENODEV; + } + } + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + pr_info("Current multiplier = %d\n", current_multiplier); + + /* Print limits */ + max_voltage = hi & 0xff; + pr_info("Highest voltage = %dmV\n", max_voltage * 16 + 700); + max_multiplier = (hi >> 8) & 0xff; + pr_info("Highest multiplier = %d\n", max_multiplier); + min_voltage = (hi >> 16) & 0xff; + pr_info("Lowest voltage = %dmV\n", min_voltage * 16 + 700); + min_multiplier = (hi >> 24) & 0xff; + pr_info("Lowest multiplier = %d\n", min_multiplier); + + /* Sanity checks */ + if (current_multiplier == 0 || max_multiplier == 0 + || min_multiplier == 0) + return -EINVAL; + if (current_multiplier > max_multiplier + || max_multiplier <= min_multiplier) + return -EINVAL; + if (current_voltage > 0x1f || max_voltage > 0x1f) + return -EINVAL; + if (max_voltage < min_voltage + || current_voltage < min_voltage + || current_voltage > max_voltage) + return -EINVAL; + + /* Check for systems using underclocked CPU */ + if (!freq_failsafe_off && max_multiplier != current_multiplier) { + pr_info("Your processor is running at different frequency then its maximum. Aborting.\n"); + pr_info("You can use freq_failsafe_off option to disable this check.\n"); + return -EINVAL; + } + if (!voltage_failsafe_off && max_voltage != current_voltage) { + pr_info("Your processor is running at different voltage then its maximum. Aborting.\n"); + pr_info("You can use voltage_failsafe_off option to disable this check.\n"); + return -EINVAL; + } + + /* Calc FSB speed */ + fsb = cpu_khz / current_multiplier; + +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) + /* Check for ACPI processor speed limit */ + if (!ignore_acpi_limit && !eps_acpi_init()) { + if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) { + pr_info("ACPI limit %u.%uGHz\n", + limit/1000000, + (limit%1000000)/10000); + eps_acpi_exit(policy); + /* Check if max_multiplier is in BIOS limits */ + if (limit && max_multiplier * fsb > limit) { + pr_info("Aborting\n"); + return -EINVAL; + } + } + } +#endif + + /* Allow user to set lower maximum voltage then that reported + * by processor */ + if (brand == EPS_BRAND_C7M && set_max_voltage) { + u32 v; + + /* Change mV to something hardware can use */ + v = (set_max_voltage - 700) / 16; + /* Check if voltage is within limits */ + if (v >= min_voltage && v <= max_voltage) { + pr_info("Setting %dmV as maximum\n", v * 16 + 700); + max_voltage = v; + } + } + + /* Calc number of p-states supported */ + if (brand == EPS_BRAND_C7M) + states = max_multiplier - min_multiplier + 1; + else + states = 2; + + /* Allocate private data and frequency table for current cpu */ + centaur = kzalloc(struct_size(centaur, freq_table, states + 1), + GFP_KERNEL); + if (!centaur) + return -ENOMEM; + eps_cpu[0] = centaur; + + /* Copy basic values */ + centaur->fsb = fsb; +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) + centaur->bios_limit = limit; +#endif + + /* Fill frequency and MSR value table */ + f_table = ¢aur->freq_table[0]; + if (brand != EPS_BRAND_C7M) { + f_table[0].frequency = fsb * min_multiplier; + f_table[0].driver_data = (min_multiplier << 8) | min_voltage; + f_table[1].frequency = fsb * max_multiplier; + f_table[1].driver_data = (max_multiplier << 8) | max_voltage; + f_table[2].frequency = CPUFREQ_TABLE_END; + } else { + k = 0; + step = ((max_voltage - min_voltage) * 256) + / (max_multiplier - min_multiplier); + for (i = min_multiplier; i <= max_multiplier; i++) { + voltage = (k * step) / 256 + min_voltage; + f_table[k].frequency = fsb * i; + f_table[k].driver_data = (i << 8) | voltage; + k++; + } + f_table[k].frequency = CPUFREQ_TABLE_END; + } + + policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ + policy->freq_table = ¢aur->freq_table[0]; + + return 0; +} + +static int eps_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + + /* Bye */ + kfree(eps_cpu[cpu]); + eps_cpu[cpu] = NULL; + return 0; +} + +static struct cpufreq_driver eps_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = eps_target, + .init = eps_cpu_init, + .exit = eps_cpu_exit, + .get = eps_get, + .name = "e_powersaver", + .attr = cpufreq_generic_attr, +}; + + +/* This driver will work only on Centaur C7 processors with + * Enhanced SpeedStep/PowerSaver registers */ +static const struct x86_cpu_id eps_cpu_id[] = { + X86_MATCH_VENDOR_FAM_FEATURE(CENTAUR, 6, X86_FEATURE_EST, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, eps_cpu_id); + +static int __init eps_init(void) +{ + if (!x86_match_cpu(eps_cpu_id) || boot_cpu_data.x86_model < 10) + return -ENODEV; + if (cpufreq_register_driver(&eps_driver)) + return -EINVAL; + return 0; +} + +static void __exit eps_exit(void) +{ + cpufreq_unregister_driver(&eps_driver); +} + +/* Allow user to overclock his machine or to change frequency to higher after + * unloading module */ +module_param(freq_failsafe_off, int, 0644); +MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check"); +module_param(voltage_failsafe_off, int, 0644); +MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check"); +#if IS_ENABLED(CONFIG_ACPI_PROCESSOR) +module_param(ignore_acpi_limit, int, 0644); +MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit"); +#endif +module_param(set_max_voltage, int, 0644); +MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only"); + +MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); +MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); +MODULE_LICENSE("GPL"); + +module_init(eps_init); +module_exit(eps_exit); diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c new file mode 100644 index 000000000..4ce5eb35d --- /dev/null +++ b/drivers/cpufreq/elanfreq.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * elanfreq: cpufreq driver for the AMD ELAN family + * + * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> + * + * Parts of this code are (c) Sven Geggus <sven@geggus.net> + * + * All Rights Reserved. + * + * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> +#include <linux/timex.h> +#include <linux/io.h> + +#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ +#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ + +/* Module parameter */ +static int max_freq; + +struct s_elan_multiplier { + int clock; /* frequency in kHz */ + int val40h; /* PMU Force Mode register */ + int val80h; /* CPU Clock Speed Register */ +}; + +/* + * It is important that the frequencies + * are listed in ascending order here! + */ +static struct s_elan_multiplier elan_multiplier[] = { + {1000, 0x02, 0x18}, + {2000, 0x02, 0x10}, + {4000, 0x02, 0x08}, + {8000, 0x00, 0x00}, + {16000, 0x00, 0x02}, + {33000, 0x00, 0x04}, + {66000, 0x01, 0x04}, + {99000, 0x01, 0x05} +}; + +static struct cpufreq_frequency_table elanfreq_table[] = { + {0, 0, 1000}, + {0, 1, 2000}, + {0, 2, 4000}, + {0, 3, 8000}, + {0, 4, 16000}, + {0, 5, 33000}, + {0, 6, 66000}, + {0, 7, 99000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + + +/** + * elanfreq_get_cpu_frequency: determine current cpu speed + * + * Finds out at which frequency the CPU of the Elan SOC runs + * at the moment. Frequencies from 1 to 33 MHz are generated + * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" + * and have the rest of the chip running with 33 MHz. + */ + +static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg; /* Clock Speed Register */ + + local_irq_disable(); + outb_p(0x80, REG_CSCIR); + clockspeed_reg = inb_p(REG_CSCDR); + local_irq_enable(); + + if ((clockspeed_reg & 0xE0) == 0xE0) + return 0; + + /* Are we in CPU clock multiplied mode (66/99 MHz)? */ + if ((clockspeed_reg & 0xE0) == 0xC0) { + if ((clockspeed_reg & 0x01) == 0) + return 66000; + else + return 99000; + } + + /* 33 MHz is not 32 MHz... */ + if ((clockspeed_reg & 0xE0) == 0xA0) + return 33000; + + return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; +} + + +static int elanfreq_target(struct cpufreq_policy *policy, + unsigned int state) +{ + /* + * Access to the Elan's internal registers is indexed via + * 0x22: Chip Setup & Control Register Index Register (CSCI) + * 0x23: Chip Setup & Control Register Data Register (CSCD) + * + */ + + /* + * 0x40 is the Power Management Unit's Force Mode Register. + * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) + */ + + local_irq_disable(); + outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x00, REG_CSCDR); + local_irq_enable(); /* wait till internal pipelines and */ + udelay(1000); /* buffers have cleaned up */ + + local_irq_disable(); + + /* now, set the CPU clock speed register (0x80) */ + outb_p(0x80, REG_CSCIR); + outb_p(elan_multiplier[state].val80h, REG_CSCDR); + + /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ + outb_p(0x40, REG_CSCIR); + outb_p(elan_multiplier[state].val40h, REG_CSCDR); + udelay(10000); + local_irq_enable(); + + return 0; +} +/* + * Module init and exit code + */ + +static int elanfreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + struct cpufreq_frequency_table *pos; + + /* capability check */ + if ((c->x86_vendor != X86_VENDOR_AMD) || + (c->x86 != 4) || (c->x86_model != 10)) + return -ENODEV; + + /* max freq */ + if (!max_freq) + max_freq = elanfreq_get_cpu_frequency(0); + + /* table init */ + cpufreq_for_each_entry(pos, elanfreq_table) + if (pos->frequency > max_freq) + pos->frequency = CPUFREQ_ENTRY_INVALID; + + policy->freq_table = elanfreq_table; + return 0; +} + + +#ifndef MODULE +/** + * elanfreq_setup - elanfreq command line parameter parsing + * + * elanfreq command line parameter. Use: + * elanfreq=66000 + * to set the maximum CPU frequency to 66 MHz. Note that in + * case you do not give this boot parameter, the maximum + * frequency will fall back to _current_ CPU frequency which + * might be lower. If you build this as a module, use the + * max_freq module parameter instead. + */ +static int __init elanfreq_setup(char *str) +{ + max_freq = simple_strtoul(str, &str, 0); + pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); + return 1; +} +__setup("elanfreq=", elanfreq_setup); +#endif + + +static struct cpufreq_driver elanfreq_driver = { + .get = elanfreq_get_cpu_frequency, + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = elanfreq_target, + .init = elanfreq_cpu_init, + .name = "elanfreq", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id elan_id[] = { + X86_MATCH_VENDOR_FAM_MODEL(AMD, 4, 10, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, elan_id); + +static int __init elanfreq_init(void) +{ + if (!x86_match_cpu(elan_id)) + return -ENODEV; + return cpufreq_register_driver(&elanfreq_driver); +} + + +static void __exit elanfreq_exit(void) +{ + cpufreq_unregister_driver(&elanfreq_driver); +} + + +module_param(max_freq, int, 0444); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " + "Sven Geggus <sven@geggus.net>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); + +module_init(elanfreq_init); +module_exit(elanfreq_exit); diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c new file mode 100644 index 000000000..67e56cf63 --- /dev/null +++ b/drivers/cpufreq/freq_table.c @@ -0,0 +1,370 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/cpufreq/freq_table.c + * + * Copyright (C) 2002 - 2003 Dominik Brodowski + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> + +/********************************************************************* + * FREQUENCY TABLE HELPERS * + *********************************************************************/ + +bool policy_has_boost_freq(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos, *table = policy->freq_table; + + if (!table) + return false; + + cpufreq_for_each_valid_entry(pos, table) + if (pos->flags & CPUFREQ_BOOST_FREQ) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(policy_has_boost_freq); + +int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + unsigned int min_freq = ~0; + unsigned int max_freq = 0; + unsigned int freq; + + cpufreq_for_each_valid_entry(pos, table) { + freq = pos->frequency; + + if (!cpufreq_boost_enabled() + && (pos->flags & CPUFREQ_BOOST_FREQ)) + continue; + + pr_debug("table entry %u: %u kHz\n", (int)(pos - table), freq); + if (freq < min_freq) + min_freq = freq; + if (freq > max_freq) + max_freq = freq; + } + + policy->min = policy->cpuinfo.min_freq = min_freq; + policy->max = max_freq; + /* + * If the driver has set its own cpuinfo.max_freq above max_freq, leave + * it as is. + */ + if (policy->cpuinfo.max_freq < max_freq) + policy->max = policy->cpuinfo.max_freq = max_freq; + + if (policy->min == ~0) + return -EINVAL; + else + return 0; +} + +int cpufreq_frequency_table_verify(struct cpufreq_policy_data *policy, + struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + unsigned int freq, next_larger = ~0; + bool found = false; + + pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n", + policy->min, policy->max, policy->cpu); + + cpufreq_verify_within_cpu_limits(policy); + + cpufreq_for_each_valid_entry(pos, table) { + freq = pos->frequency; + + if ((freq >= policy->min) && (freq <= policy->max)) { + found = true; + break; + } + + if ((next_larger > freq) && (freq > policy->max)) + next_larger = freq; + } + + if (!found) { + policy->max = next_larger; + cpufreq_verify_within_cpu_limits(policy); + } + + pr_debug("verification lead to (%u - %u kHz) for cpu %u\n", + policy->min, policy->max, policy->cpu); + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_verify); + +/* + * Generic routine to verify policy & frequency table, requires driver to set + * policy->freq_table prior to it. + */ +int cpufreq_generic_frequency_table_verify(struct cpufreq_policy_data *policy) +{ + if (!policy->freq_table) + return -ENODEV; + + return cpufreq_frequency_table_verify(policy, policy->freq_table); +} +EXPORT_SYMBOL_GPL(cpufreq_generic_frequency_table_verify); + +int cpufreq_table_index_unsorted(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_frequency_table optimal = { + .driver_data = ~0, + .frequency = 0, + }; + struct cpufreq_frequency_table suboptimal = { + .driver_data = ~0, + .frequency = 0, + }; + struct cpufreq_frequency_table *pos; + struct cpufreq_frequency_table *table = policy->freq_table; + unsigned int freq, diff, i = 0; + int index; + + pr_debug("request for target %u kHz (relation: %u) for cpu %u\n", + target_freq, relation, policy->cpu); + + switch (relation) { + case CPUFREQ_RELATION_H: + suboptimal.frequency = ~0; + break; + case CPUFREQ_RELATION_L: + case CPUFREQ_RELATION_C: + optimal.frequency = ~0; + break; + } + + cpufreq_for_each_valid_entry_idx(pos, table, i) { + freq = pos->frequency; + + if ((freq < policy->min) || (freq > policy->max)) + continue; + if (freq == target_freq) { + optimal.driver_data = i; + break; + } + switch (relation) { + case CPUFREQ_RELATION_H: + if (freq < target_freq) { + if (freq >= optimal.frequency) { + optimal.frequency = freq; + optimal.driver_data = i; + } + } else { + if (freq <= suboptimal.frequency) { + suboptimal.frequency = freq; + suboptimal.driver_data = i; + } + } + break; + case CPUFREQ_RELATION_L: + if (freq > target_freq) { + if (freq <= optimal.frequency) { + optimal.frequency = freq; + optimal.driver_data = i; + } + } else { + if (freq >= suboptimal.frequency) { + suboptimal.frequency = freq; + suboptimal.driver_data = i; + } + } + break; + case CPUFREQ_RELATION_C: + diff = abs(freq - target_freq); + if (diff < optimal.frequency || + (diff == optimal.frequency && + freq > table[optimal.driver_data].frequency)) { + optimal.frequency = diff; + optimal.driver_data = i; + } + break; + } + } + if (optimal.driver_data > i) { + if (suboptimal.driver_data > i) { + WARN(1, "Invalid frequency table: %d\n", policy->cpu); + return 0; + } + + index = suboptimal.driver_data; + } else + index = optimal.driver_data; + + pr_debug("target index is %u, freq is:%u kHz\n", index, + table[index].frequency); + return index; +} +EXPORT_SYMBOL_GPL(cpufreq_table_index_unsorted); + +int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy, + unsigned int freq) +{ + struct cpufreq_frequency_table *pos, *table = policy->freq_table; + int idx; + + if (unlikely(!table)) { + pr_debug("%s: Unable to find frequency table\n", __func__); + return -ENOENT; + } + + cpufreq_for_each_valid_entry_idx(pos, table, idx) + if (pos->frequency == freq) + return idx; + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_index); + +/* + * show_available_freqs - show available frequencies for the specified CPU + */ +static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf, + bool show_boost) +{ + ssize_t count = 0; + struct cpufreq_frequency_table *pos, *table = policy->freq_table; + + if (!table) + return -ENODEV; + + cpufreq_for_each_valid_entry(pos, table) { + /* + * show_boost = true and driver_data = BOOST freq + * display BOOST freqs + * + * show_boost = false and driver_data = BOOST freq + * show_boost = true and driver_data != BOOST freq + * continue - do not display anything + * + * show_boost = false and driver_data != BOOST freq + * display NON BOOST freqs + */ + if (show_boost ^ (pos->flags & CPUFREQ_BOOST_FREQ)) + continue; + + count += sprintf(&buf[count], "%d ", pos->frequency); + } + count += sprintf(&buf[count], "\n"); + + return count; + +} + +#define cpufreq_attr_available_freq(_name) \ +struct freq_attr cpufreq_freq_attr_##_name##_freqs = \ +__ATTR_RO(_name##_frequencies) + +/* + * scaling_available_frequencies_show - show available normal frequencies for + * the specified CPU + */ +static ssize_t scaling_available_frequencies_show(struct cpufreq_policy *policy, + char *buf) +{ + return show_available_freqs(policy, buf, false); +} +cpufreq_attr_available_freq(scaling_available); +EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs); + +/* + * scaling_boost_frequencies_show - show available boost frequencies for + * the specified CPU + */ +static ssize_t scaling_boost_frequencies_show(struct cpufreq_policy *policy, + char *buf) +{ + return show_available_freqs(policy, buf, true); +} +cpufreq_attr_available_freq(scaling_boost); +EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_boost_freqs); + +struct freq_attr *cpufreq_generic_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; +EXPORT_SYMBOL_GPL(cpufreq_generic_attr); + +static int set_freq_table_sorted(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos, *table = policy->freq_table; + struct cpufreq_frequency_table *prev = NULL; + int ascending = 0; + + policy->freq_table_sorted = CPUFREQ_TABLE_UNSORTED; + + cpufreq_for_each_valid_entry(pos, table) { + if (!prev) { + prev = pos; + continue; + } + + if (pos->frequency == prev->frequency) { + pr_warn("Duplicate freq-table entries: %u\n", + pos->frequency); + return -EINVAL; + } + + /* Frequency increased from prev to pos */ + if (pos->frequency > prev->frequency) { + /* But frequency was decreasing earlier */ + if (ascending < 0) { + pr_debug("Freq table is unsorted\n"); + return 0; + } + + ascending++; + } else { + /* Frequency decreased from prev to pos */ + + /* But frequency was increasing earlier */ + if (ascending > 0) { + pr_debug("Freq table is unsorted\n"); + return 0; + } + + ascending--; + } + + prev = pos; + } + + if (ascending > 0) + policy->freq_table_sorted = CPUFREQ_TABLE_SORTED_ASCENDING; + else + policy->freq_table_sorted = CPUFREQ_TABLE_SORTED_DESCENDING; + + pr_debug("Freq table is sorted in %s order\n", + ascending > 0 ? "ascending" : "descending"); + + return 0; +} + +int cpufreq_table_validate_and_sort(struct cpufreq_policy *policy) +{ + int ret; + + if (!policy->freq_table) + return 0; + + ret = cpufreq_frequency_table_cpuinfo(policy, policy->freq_table); + if (ret) + return ret; + + return set_freq_table_sorted(policy); +} + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("CPUfreq frequency table helpers"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c new file mode 100644 index 000000000..75b3ef7ec --- /dev/null +++ b/drivers/cpufreq/gx-suspmod.c @@ -0,0 +1,498 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Cyrix MediaGX and NatSemi Geode Suspend Modulation + * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * (C) 2002 Hiroshi Miura <miura@da-cha.org> + * All Rights Reserved + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + * + * Theoretical note: + * + * (see Geode(tm) CS5530 manual (rev.4.1) page.56) + * + * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 + * are based on Suspend Modulation. + * + * Suspend Modulation works by asserting and de-asserting the SUSP# pin + * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# + * the CPU enters an idle state. GX1 stops its core clock when SUSP# is + * asserted then power consumption is reduced. + * + * Suspend Modulation's OFF/ON duration are configurable + * with 'Suspend Modulation OFF Count Register' + * and 'Suspend Modulation ON Count Register'. + * These registers are 8bit counters that represent the number of + * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) + * to the processor. + * + * These counters define a ratio which is the effective frequency + * of operation of the system. + * + * OFF Count + * F_eff = Fgx * ---------------------- + * OFF Count + ON Count + * + * 0 <= On Count, Off Count <= 255 + * + * From these limits, we can get register values + * + * off_duration + on_duration <= MAX_DURATION + * on_duration = off_duration * (stock_freq - freq) / freq + * + * off_duration = (freq * DURATION) / stock_freq + * on_duration = DURATION - off_duration + * + *--------------------------------------------------------------------------- + * + * ChangeLog: + * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> + * - fix on/off register mistake + * - fix cpu_khz calc when it stops cpu modulation. + * + * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> + * - rewrite for Cyrix MediaGX Cx5510/5520 and + * NatSemi Geode Cs5530(A). + * + * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * - cs5530_mod patch for 2.4.19-rc1. + * + *--------------------------------------------------------------------------- + * + * Todo + * Test on machines with 5510, 5530, 5530A + */ + +/************************************************************************ + * Suspend Modulation - Definitions * + ************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/errno.h> +#include <linux/slab.h> + +#include <asm/cpu_device_id.h> +#include <asm/processor-cyrix.h> + +/* PCI config registers, all at F0 */ +#define PCI_PMER1 0x80 /* power management enable register 1 */ +#define PCI_PMER2 0x81 /* power management enable register 2 */ +#define PCI_PMER3 0x82 /* power management enable register 3 */ +#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ +#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ +#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ +#define PCI_MODON 0x95 /* suspend modulation ON counter register */ +#define PCI_SUSCFG 0x96 /* suspend configuration register */ + +/* PMER1 bits */ +#define GPM (1<<0) /* global power management */ +#define GIT (1<<1) /* globally enable PM device idle timers */ +#define GTR (1<<2) /* globally enable IO traps */ +#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ +#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ + +/* SUSCFG bits */ +#define SUSMOD (1<<0) /* enable/disable suspend modulation */ +/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */ +#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ + /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ +#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ +/* the below is supported only with cs5530A */ +#define PWRSVE_ISA (1<<3) /* stop ISA clock */ +#define PWRSVE (1<<4) /* active idle */ + +struct gxfreq_params { + u8 on_duration; + u8 off_duration; + u8 pci_suscfg; + u8 pci_pmer1; + u8 pci_pmer2; + struct pci_dev *cs55x0; +}; + +static struct gxfreq_params *gx_params; +static int stock_freq; + +/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ +static int pci_busclk; +module_param(pci_busclk, int, 0444); + +/* maximum duration for which the cpu may be suspended + * (32us * MAX_DURATION). If no parameter is given, this defaults + * to 255. + * Note that this leads to a maximum of 8 ms(!) where the CPU clock + * is suspended -- processing power is just 0.39% of what it used to be, + * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ +static int max_duration = 255; +module_param(max_duration, int, 0444); + +/* For the default policy, we want at least some processing power + * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) + */ +#define POLICY_MIN_DIV 20 + + +/** + * we can detect a core multiplier from dir0_lsb + * from GX1 datasheet p.56, + * MULT[3:0]: + * 0000 = SYSCLK multiplied by 4 (test only) + * 0001 = SYSCLK multiplied by 10 + * 0010 = SYSCLK multiplied by 4 + * 0011 = SYSCLK multiplied by 6 + * 0100 = SYSCLK multiplied by 9 + * 0101 = SYSCLK multiplied by 5 + * 0110 = SYSCLK multiplied by 7 + * 0111 = SYSCLK multiplied by 8 + * of 33.3MHz + **/ +static int gx_freq_mult[16] = { + 4, 10, 4, 6, 9, 5, 7, 8, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + + +/**************************************************************** + * Low Level chipset interface * + ****************************************************************/ +static struct pci_device_id gx_chipset_tbl[] __initdata = { + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), }, + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, + { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, gx_chipset_tbl); + +static void gx_write_byte(int reg, int value) +{ + pci_write_config_byte(gx_params->cs55x0, reg, value); +} + +/** + * gx_detect_chipset: + * + **/ +static struct pci_dev * __init gx_detect_chipset(void) +{ + struct pci_dev *gx_pci = NULL; + + /* detect which companion chip is used */ + for_each_pci_dev(gx_pci) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) + return gx_pci; + } + + pr_debug("error: no supported chipset found!\n"); + return NULL; +} + +/** + * gx_get_cpuspeed: + * + * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi + * Geode CPU runs. + */ +static unsigned int gx_get_cpuspeed(unsigned int cpu) +{ + if ((gx_params->pci_suscfg & SUSMOD) == 0) + return stock_freq; + + return (stock_freq * gx_params->off_duration) + / (gx_params->on_duration + gx_params->off_duration); +} + +/** + * gx_validate_speed: + * determine current cpu speed + * + **/ + +static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, + u8 *off_duration) +{ + unsigned int i; + u8 tmp_on, tmp_off; + int old_tmp_freq = stock_freq; + int tmp_freq; + + *off_duration = 1; + *on_duration = 0; + + for (i = max_duration; i > 0; i--) { + tmp_off = ((khz * i) / stock_freq) & 0xff; + tmp_on = i - tmp_off; + tmp_freq = (stock_freq * tmp_off) / i; + /* if this relation is closer to khz, use this. If it's equal, + * prefer it, too - lower latency */ + if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) { + *on_duration = tmp_on; + *off_duration = tmp_off; + old_tmp_freq = tmp_freq; + } + } + + return old_tmp_freq; +} + + +/** + * gx_set_cpuspeed: + * set cpu speed in khz. + **/ + +static void gx_set_cpuspeed(struct cpufreq_policy *policy, unsigned int khz) +{ + u8 suscfg, pmer1; + unsigned int new_khz; + unsigned long flags; + struct cpufreq_freqs freqs; + + freqs.old = gx_get_cpuspeed(0); + + new_khz = gx_validate_speed(khz, &gx_params->on_duration, + &gx_params->off_duration); + + freqs.new = new_khz; + + cpufreq_freq_transition_begin(policy, &freqs); + local_irq_save(flags); + + if (new_khz != stock_freq) { + /* if new khz == 100% of CPU speed, it is special case */ + switch (gx_params->cs55x0->device) { + case PCI_DEVICE_ID_CYRIX_5530_LEGACY: + pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; + /* FIXME: need to test other values -- Zwane,Miura */ + /* typical 2 to 4ms */ + gx_write_byte(PCI_IRQTC, 4); + /* typical 50 to 100ms */ + gx_write_byte(PCI_VIDTC, 100); + gx_write_byte(PCI_PMER1, pmer1); + + if (gx_params->cs55x0->revision < 0x10) { + /* CS5530(rev 1.2, 1.3) */ + suscfg = gx_params->pci_suscfg|SUSMOD; + } else { + /* CS5530A,B.. */ + suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; + } + break; + case PCI_DEVICE_ID_CYRIX_5520: + case PCI_DEVICE_ID_CYRIX_5510: + suscfg = gx_params->pci_suscfg | SUSMOD; + break; + default: + local_irq_restore(flags); + pr_debug("fatal: try to set unknown chipset.\n"); + return; + } + } else { + suscfg = gx_params->pci_suscfg & ~(SUSMOD); + gx_params->off_duration = 0; + gx_params->on_duration = 0; + pr_debug("suspend modulation disabled: cpu runs 100%% speed.\n"); + } + + gx_write_byte(PCI_MODOFF, gx_params->off_duration); + gx_write_byte(PCI_MODON, gx_params->on_duration); + + gx_write_byte(PCI_SUSCFG, suscfg); + pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); + + local_irq_restore(flags); + + gx_params->pci_suscfg = suscfg; + + cpufreq_freq_transition_end(policy, &freqs, 0); + + pr_debug("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", + gx_params->on_duration * 32, gx_params->off_duration * 32); + pr_debug("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); +} + +/**************************************************************** + * High level functions * + ****************************************************************/ + +/* + * cpufreq_gx_verify: test if frequency range is valid + * + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. + */ + +static int cpufreq_gx_verify(struct cpufreq_policy_data *policy) +{ + unsigned int tmp_freq = 0; + u8 tmp1, tmp2; + + if (!stock_freq || !policy) + return -EINVAL; + + policy->cpu = 0; + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); + + /* it needs to be assured that at least one supported frequency is + * within policy->min and policy->max. If it is not, policy->max + * needs to be increased until one frequency is supported. + * policy->min may not be decreased, though. This way we guarantee a + * specific processing capacity. + */ + tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); + if (tmp_freq < policy->min) + tmp_freq += stock_freq / max_duration; + policy->min = tmp_freq; + if (policy->min > policy->max) + policy->max = tmp_freq; + tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); + if (tmp_freq > policy->max) + tmp_freq -= stock_freq / max_duration; + policy->max = tmp_freq; + if (policy->max < policy->min) + policy->max = policy->min; + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); + + return 0; +} + +/* + * cpufreq_gx_target: + * + */ +static int cpufreq_gx_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + u8 tmp1, tmp2; + unsigned int tmp_freq; + + if (!stock_freq || !policy) + return -EINVAL; + + policy->cpu = 0; + + tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2); + while (tmp_freq < policy->min) { + tmp_freq += stock_freq / max_duration; + tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); + } + while (tmp_freq > policy->max) { + tmp_freq -= stock_freq / max_duration; + tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); + } + + gx_set_cpuspeed(policy, tmp_freq); + + return 0; +} + +static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int maxfreq; + + if (!policy || policy->cpu != 0) + return -ENODEV; + + /* determine maximum frequency */ + if (pci_busclk) + maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; + else if (cpu_khz) + maxfreq = cpu_khz; + else + maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; + + stock_freq = maxfreq; + + pr_debug("cpu max frequency is %d.\n", maxfreq); + + /* setup basic struct for cpufreq API */ + policy->cpu = 0; + + if (max_duration < POLICY_MIN_DIV) + policy->min = maxfreq / max_duration; + else + policy->min = maxfreq / POLICY_MIN_DIV; + policy->max = maxfreq; + policy->cpuinfo.min_freq = maxfreq / max_duration; + policy->cpuinfo.max_freq = maxfreq; + + return 0; +} + +/* + * cpufreq_gx_init: + * MediaGX/Geode GX initialize cpufreq driver + */ +static struct cpufreq_driver gx_suspmod_driver = { + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .get = gx_get_cpuspeed, + .verify = cpufreq_gx_verify, + .target = cpufreq_gx_target, + .init = cpufreq_gx_cpu_init, + .name = "gx-suspmod", +}; + +static int __init cpufreq_gx_init(void) +{ + int ret; + struct gxfreq_params *params; + struct pci_dev *gx_pci; + + /* Test if we have the right hardware */ + gx_pci = gx_detect_chipset(); + if (gx_pci == NULL) + return -ENODEV; + + /* check whether module parameters are sane */ + if (max_duration > 0xff) + max_duration = 0xff; + + pr_debug("geode suspend modulation available.\n"); + + params = kzalloc(sizeof(*params), GFP_KERNEL); + if (params == NULL) + return -ENOMEM; + + params->cs55x0 = gx_pci; + gx_params = params; + + /* keep cs55x0 configurations */ + pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg)); + pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); + pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); + pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); + pci_read_config_byte(params->cs55x0, PCI_MODOFF, + &(params->off_duration)); + + ret = cpufreq_register_driver(&gx_suspmod_driver); + if (ret) { + kfree(params); + return ret; /* register error! */ + } + + return 0; +} + +static void __exit cpufreq_gx_exit(void) +{ + cpufreq_unregister_driver(&gx_suspmod_driver); + pci_dev_put(gx_params->cs55x0); + kfree(gx_params); +} + +MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>"); +MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); +MODULE_LICENSE("GPL"); + +module_init(cpufreq_gx_init); +module_exit(cpufreq_gx_exit); + diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c new file mode 100644 index 000000000..a45864701 --- /dev/null +++ b/drivers/cpufreq/highbank-cpufreq.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Calxeda, Inc. + * + * This driver provides the clk notifier callbacks that are used when + * the cpufreq-dt driver changes to frequency to alert the highbank + * EnergyCore Management Engine (ECME) about the need to change + * voltage. The ECME interfaces with the actual voltage regulators. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/pl320-ipc.h> +#include <linux/platform_device.h> + +#define HB_CPUFREQ_CHANGE_NOTE 0x80000001 +#define HB_CPUFREQ_IPC_LEN 7 +#define HB_CPUFREQ_VOLT_RETRIES 15 + +static int hb_voltage_change(unsigned int freq) +{ + u32 msg[HB_CPUFREQ_IPC_LEN] = {HB_CPUFREQ_CHANGE_NOTE, freq / 1000000}; + + return pl320_ipc_transmit(msg); +} + +static int hb_cpufreq_clk_notify(struct notifier_block *nb, + unsigned long action, void *hclk) +{ + struct clk_notifier_data *clk_data = hclk; + int i = 0; + + if (action == PRE_RATE_CHANGE) { + if (clk_data->new_rate > clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > HB_CPUFREQ_VOLT_RETRIES) + return NOTIFY_BAD; + } else if (action == POST_RATE_CHANGE) { + if (clk_data->new_rate < clk_data->old_rate) + while (hb_voltage_change(clk_data->new_rate)) + if (i++ > HB_CPUFREQ_VOLT_RETRIES) + return NOTIFY_BAD; + } + + return NOTIFY_DONE; +} + +static struct notifier_block hb_cpufreq_clk_nb = { + .notifier_call = hb_cpufreq_clk_notify, +}; + +static int __init hb_cpufreq_driver_init(void) +{ + struct platform_device_info devinfo = { .name = "cpufreq-dt", }; + struct device *cpu_dev; + struct clk *cpu_clk; + struct device_node *np; + int ret; + + if ((!of_machine_is_compatible("calxeda,highbank")) && + (!of_machine_is_compatible("calxeda,ecx-2000"))) + return -ENODEV; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("failed to get highbank cpufreq device\n"); + return -ENODEV; + } + + np = of_node_get(cpu_dev->of_node); + if (!np) { + pr_err("failed to find highbank cpufreq node\n"); + return -ENOENT; + } + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + ret = PTR_ERR(cpu_clk); + pr_err("failed to get cpu0 clock: %d\n", ret); + goto out_put_node; + } + + ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb); + if (ret) { + pr_err("failed to register clk notifier: %d\n", ret); + goto out_put_node; + } + + /* Instantiate cpufreq-dt */ + platform_device_register_full(&devinfo); + +out_put_node: + of_node_put(np); + return ret; +} +module_init(hb_cpufreq_driver_init); + +static const struct of_device_id __maybe_unused hb_cpufreq_of_match[] = { + { .compatible = "calxeda,highbank" }, + { .compatible = "calxeda,ecx-2000" }, + { }, +}; +MODULE_DEVICE_TABLE(of, hb_cpufreq_of_match); + +MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>"); +MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c new file mode 100644 index 000000000..c6bdc4555 --- /dev/null +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file provides the ACPI based P-state support. This + * module works with generic cpufreq infrastructure. Most of + * the code is based on i386 version + * (arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c) + * + * Copyright (C) 2005 Intel Corp + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/proc_fs.h> +#include <asm/io.h> +#include <linux/uaccess.h> +#include <asm/pal.h> + +#include <linux/acpi.h> +#include <acpi/processor.h> + +MODULE_AUTHOR("Venkatesh Pallipadi"); +MODULE_DESCRIPTION("ACPI Processor P-States Driver"); +MODULE_LICENSE("GPL"); + +struct cpufreq_acpi_io { + struct acpi_processor_performance acpi_data; + unsigned int resume; +}; + +struct cpufreq_acpi_req { + unsigned int cpu; + unsigned int state; +}; + +static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; + +static struct cpufreq_driver acpi_cpufreq_driver; + + +static int +processor_set_pstate ( + u32 value) +{ + s64 retval; + + pr_debug("processor_set_pstate\n"); + + retval = ia64_pal_set_pstate((u64)value); + + if (retval) { + pr_debug("Failed to set freq to 0x%x, with error 0x%llx\n", + value, retval); + return -ENODEV; + } + return (int)retval; +} + + +static int +processor_get_pstate ( + u32 *value) +{ + u64 pstate_index = 0; + s64 retval; + + pr_debug("processor_get_pstate\n"); + + retval = ia64_pal_get_pstate(&pstate_index, + PAL_GET_PSTATE_TYPE_INSTANT); + *value = (u32) pstate_index; + + if (retval) + pr_debug("Failed to get current freq with " + "error 0x%llx, idx 0x%x\n", retval, *value); + + return (int)retval; +} + + +/* To be used only after data->acpi_data is initialized */ +static unsigned +extract_clock ( + struct cpufreq_acpi_io *data, + unsigned value) +{ + unsigned long i; + + pr_debug("extract_clock\n"); + + for (i = 0; i < data->acpi_data.state_count; i++) { + if (value == data->acpi_data.states[i].status) + return data->acpi_data.states[i].core_frequency; + } + return data->acpi_data.states[i-1].core_frequency; +} + + +static long +processor_get_freq ( + void *arg) +{ + struct cpufreq_acpi_req *req = arg; + unsigned int cpu = req->cpu; + struct cpufreq_acpi_io *data = acpi_io_data[cpu]; + u32 value; + int ret; + + pr_debug("processor_get_freq\n"); + if (smp_processor_id() != cpu) + return -EAGAIN; + + /* processor_get_pstate gets the instantaneous frequency */ + ret = processor_get_pstate(&value); + if (ret) { + pr_warn("get performance failed with error %d\n", ret); + return ret; + } + return 1000 * extract_clock(data, value); +} + + +static long +processor_set_freq ( + void *arg) +{ + struct cpufreq_acpi_req *req = arg; + unsigned int cpu = req->cpu; + struct cpufreq_acpi_io *data = acpi_io_data[cpu]; + int ret, state = req->state; + u32 value; + + pr_debug("processor_set_freq\n"); + if (smp_processor_id() != cpu) + return -EAGAIN; + + if (state == data->acpi_data.state) { + if (unlikely(data->resume)) { + pr_debug("Called after resume, resetting to P%d\n", state); + data->resume = 0; + } else { + pr_debug("Already at target state (P%d)\n", state); + return 0; + } + } + + pr_debug("Transitioning from P%d to P%d\n", + data->acpi_data.state, state); + + /* + * First we write the target state's 'control' value to the + * control_register. + */ + value = (u32) data->acpi_data.states[state].control; + + pr_debug("Transitioning to state: 0x%08x\n", value); + + ret = processor_set_pstate(value); + if (ret) { + pr_warn("Transition failed with error %d\n", ret); + return -ENODEV; + } + + data->acpi_data.state = state; + return 0; +} + + +static unsigned int +acpi_cpufreq_get ( + unsigned int cpu) +{ + struct cpufreq_acpi_req req; + long ret; + + req.cpu = cpu; + ret = work_on_cpu(cpu, processor_get_freq, &req); + + return ret > 0 ? (unsigned int) ret : 0; +} + + +static int +acpi_cpufreq_target ( + struct cpufreq_policy *policy, + unsigned int index) +{ + struct cpufreq_acpi_req req; + + req.cpu = policy->cpu; + req.state = index; + + return work_on_cpu(req.cpu, processor_set_freq, &req); +} + +static int +acpi_cpufreq_cpu_init ( + struct cpufreq_policy *policy) +{ + unsigned int i; + unsigned int cpu = policy->cpu; + struct cpufreq_acpi_io *data; + unsigned int result = 0; + struct cpufreq_frequency_table *freq_table; + + pr_debug("acpi_cpufreq_cpu_init\n"); + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return (-ENOMEM); + + acpi_io_data[cpu] = data; + + result = acpi_processor_register_performance(&data->acpi_data, cpu); + + if (result) + goto err_free; + + /* capability check */ + if (data->acpi_data.state_count <= 1) { + pr_debug("No P-States\n"); + result = -ENODEV; + goto err_unreg; + } + + if ((data->acpi_data.control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) || + (data->acpi_data.status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE)) { + pr_debug("Unsupported address space [%d, %d]\n", + (u32) (data->acpi_data.control_register.space_id), + (u32) (data->acpi_data.status_register.space_id)); + result = -ENODEV; + goto err_unreg; + } + + /* alloc freq_table */ + freq_table = kcalloc(data->acpi_data.state_count + 1, + sizeof(*freq_table), + GFP_KERNEL); + if (!freq_table) { + result = -ENOMEM; + goto err_unreg; + } + + /* detect transition latency */ + policy->cpuinfo.transition_latency = 0; + for (i=0; i<data->acpi_data.state_count; i++) { + if ((data->acpi_data.states[i].transition_latency * 1000) > + policy->cpuinfo.transition_latency) { + policy->cpuinfo.transition_latency = + data->acpi_data.states[i].transition_latency * 1000; + } + } + + /* table init */ + for (i = 0; i <= data->acpi_data.state_count; i++) + { + if (i < data->acpi_data.state_count) { + freq_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; + } else { + freq_table[i].frequency = CPUFREQ_TABLE_END; + } + } + + policy->freq_table = freq_table; + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + pr_info("CPU%u - ACPI performance management activated\n", cpu); + + for (i = 0; i < data->acpi_data.state_count; i++) + pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", + (i == data->acpi_data.state?'*':' '), i, + (u32) data->acpi_data.states[i].core_frequency, + (u32) data->acpi_data.states[i].power, + (u32) data->acpi_data.states[i].transition_latency, + (u32) data->acpi_data.states[i].bus_master_latency, + (u32) data->acpi_data.states[i].status, + (u32) data->acpi_data.states[i].control); + + /* the first call to ->target() should result in us actually + * writing something to the appropriate registers. */ + data->resume = 1; + + return (result); + + err_unreg: + acpi_processor_unregister_performance(cpu); + err_free: + kfree(data); + acpi_io_data[cpu] = NULL; + + return (result); +} + + +static int +acpi_cpufreq_cpu_exit ( + struct cpufreq_policy *policy) +{ + struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; + + pr_debug("acpi_cpufreq_cpu_exit\n"); + + if (data) { + acpi_io_data[policy->cpu] = NULL; + acpi_processor_unregister_performance(policy->cpu); + kfree(policy->freq_table); + kfree(data); + } + + return (0); +} + + +static struct cpufreq_driver acpi_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = acpi_cpufreq_target, + .get = acpi_cpufreq_get, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .name = "acpi-cpufreq", + .attr = cpufreq_generic_attr, +}; + + +static int __init +acpi_cpufreq_init (void) +{ + pr_debug("acpi_cpufreq_init\n"); + + return cpufreq_register_driver(&acpi_cpufreq_driver); +} + + +static void __exit +acpi_cpufreq_exit (void) +{ + pr_debug("acpi_cpufreq_exit\n"); + + cpufreq_unregister_driver(&acpi_cpufreq_driver); +} + +late_initcall(acpi_cpufreq_init); +module_exit(acpi_cpufreq_exit); diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c new file mode 100644 index 000000000..535867a7d --- /dev/null +++ b/drivers/cpufreq/imx-cpufreq-dt.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 NXP + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include "cpufreq-dt.h" + +#define OCOTP_CFG3_SPEED_GRADE_SHIFT 8 +#define OCOTP_CFG3_SPEED_GRADE_MASK (0x3 << 8) +#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK (0xf << 8) +#define OCOTP_CFG3_MKT_SEGMENT_SHIFT 6 +#define OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 6) +#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT 5 +#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 5) + +#define IMX7ULP_MAX_RUN_FREQ 528000 + +/* cpufreq-dt device registered by imx-cpufreq-dt */ +static struct platform_device *cpufreq_dt_pdev; +static struct device *cpu_dev; +static int cpufreq_opp_token; + +enum IMX7ULP_CPUFREQ_CLKS { + ARM, + CORE, + SCS_SEL, + HSRUN_CORE, + HSRUN_SCS_SEL, + FIRC, +}; + +static struct clk_bulk_data imx7ulp_clks[] = { + { .id = "arm" }, + { .id = "core" }, + { .id = "scs_sel" }, + { .id = "hsrun_core" }, + { .id = "hsrun_scs_sel" }, + { .id = "firc" }, +}; + +static unsigned int imx7ulp_get_intermediate(struct cpufreq_policy *policy, + unsigned int index) +{ + return clk_get_rate(imx7ulp_clks[FIRC].clk); +} + +static int imx7ulp_target_intermediate(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int newfreq = policy->freq_table[index].frequency; + + clk_set_parent(imx7ulp_clks[SCS_SEL].clk, imx7ulp_clks[FIRC].clk); + clk_set_parent(imx7ulp_clks[HSRUN_SCS_SEL].clk, imx7ulp_clks[FIRC].clk); + + if (newfreq > IMX7ULP_MAX_RUN_FREQ) + clk_set_parent(imx7ulp_clks[ARM].clk, + imx7ulp_clks[HSRUN_CORE].clk); + else + clk_set_parent(imx7ulp_clks[ARM].clk, imx7ulp_clks[CORE].clk); + + return 0; +} + +static struct cpufreq_dt_platform_data imx7ulp_data = { + .target_intermediate = imx7ulp_target_intermediate, + .get_intermediate = imx7ulp_get_intermediate, +}; + +static int imx_cpufreq_dt_probe(struct platform_device *pdev) +{ + struct platform_device *dt_pdev; + u32 cell_value, supported_hw[2]; + int speed_grade, mkt_segment; + int ret; + + cpu_dev = get_cpu_device(0); + + if (!of_property_present(cpu_dev->of_node, "cpu-supply")) + return -ENODEV; + + if (of_machine_is_compatible("fsl,imx7ulp")) { + ret = clk_bulk_get(cpu_dev, ARRAY_SIZE(imx7ulp_clks), + imx7ulp_clks); + if (ret) + return ret; + + dt_pdev = platform_device_register_data(NULL, "cpufreq-dt", + -1, &imx7ulp_data, + sizeof(imx7ulp_data)); + if (IS_ERR(dt_pdev)) { + clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks); + ret = PTR_ERR(dt_pdev); + dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret); + return ret; + } + + cpufreq_dt_pdev = dt_pdev; + + return 0; + } + + ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value); + if (ret) + return ret; + + if (of_machine_is_compatible("fsl,imx8mn") || + of_machine_is_compatible("fsl,imx8mp")) + speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK) + >> OCOTP_CFG3_SPEED_GRADE_SHIFT; + else + speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) + >> OCOTP_CFG3_SPEED_GRADE_SHIFT; + + if (of_machine_is_compatible("fsl,imx8mp")) + mkt_segment = (cell_value & IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK) + >> IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT; + else + mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) + >> OCOTP_CFG3_MKT_SEGMENT_SHIFT; + + /* + * Early samples without fuses written report "0 0" which may NOT + * match any OPP defined in DT. So clamp to minimum OPP defined in + * DT to avoid warning for "no OPPs". + * + * Applies to i.MX8M series SoCs. + */ + if (mkt_segment == 0 && speed_grade == 0) { + if (of_machine_is_compatible("fsl,imx8mm") || + of_machine_is_compatible("fsl,imx8mq")) + speed_grade = 1; + if (of_machine_is_compatible("fsl,imx8mn") || + of_machine_is_compatible("fsl,imx8mp")) + speed_grade = 0xb; + } + + supported_hw[0] = BIT(speed_grade); + supported_hw[1] = BIT(mkt_segment); + dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n", + speed_grade, mkt_segment, supported_hw[0], supported_hw[1]); + + cpufreq_opp_token = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2); + if (cpufreq_opp_token < 0) { + ret = cpufreq_opp_token; + dev_err(&pdev->dev, "Failed to set supported opp: %d\n", ret); + return ret; + } + + cpufreq_dt_pdev = platform_device_register_data( + &pdev->dev, "cpufreq-dt", -1, NULL, 0); + if (IS_ERR(cpufreq_dt_pdev)) { + dev_pm_opp_put_supported_hw(cpufreq_opp_token); + ret = PTR_ERR(cpufreq_dt_pdev); + dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret); + return ret; + } + + return 0; +} + +static int imx_cpufreq_dt_remove(struct platform_device *pdev) +{ + platform_device_unregister(cpufreq_dt_pdev); + if (!of_machine_is_compatible("fsl,imx7ulp")) + dev_pm_opp_put_supported_hw(cpufreq_opp_token); + else + clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks); + + return 0; +} + +static struct platform_driver imx_cpufreq_dt_driver = { + .probe = imx_cpufreq_dt_probe, + .remove = imx_cpufreq_dt_remove, + .driver = { + .name = "imx-cpufreq-dt", + }, +}; +module_platform_driver(imx_cpufreq_dt_driver); + +MODULE_ALIAS("platform:imx-cpufreq-dt"); +MODULE_DESCRIPTION("Freescale i.MX cpufreq speed grading driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c new file mode 100644 index 000000000..39b0362a3 --- /dev/null +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -0,0 +1,549 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#define PU_SOC_VOLTAGE_NORMAL 1250000 +#define PU_SOC_VOLTAGE_HIGH 1275000 +#define FREQ_1P2_GHZ 1200000000 + +static struct regulator *arm_reg; +static struct regulator *pu_reg; +static struct regulator *soc_reg; + +enum IMX6_CPUFREQ_CLKS { + ARM, + PLL1_SYS, + STEP, + PLL1_SW, + PLL2_PFD2_396M, + /* MX6UL requires two more clks */ + PLL2_BUS, + SECONDARY_SEL, +}; +#define IMX6Q_CPUFREQ_CLK_NUM 5 +#define IMX6UL_CPUFREQ_CLK_NUM 7 + +static int num_clks; +static struct clk_bulk_data clks[] = { + { .id = "arm" }, + { .id = "pll1_sys" }, + { .id = "step" }, + { .id = "pll1_sw" }, + { .id = "pll2_pfd2_396m" }, + { .id = "pll2_bus" }, + { .id = "secondary_sel" }, +}; + +static struct device *cpu_dev; +static struct cpufreq_frequency_table *freq_table; +static unsigned int max_freq; +static unsigned int transition_latency; + +static u32 *imx6_soc_volt; +static u32 soc_opp_count; + +static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct dev_pm_opp *opp; + unsigned long freq_hz, volt, volt_old; + unsigned int old_freq, new_freq; + bool pll1_sys_temp_enabled = false; + int ret; + + new_freq = freq_table[index].frequency; + freq_hz = new_freq * 1000; + old_freq = clk_get_rate(clks[ARM].clk) / 1000; + + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); + if (IS_ERR(opp)) { + dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz); + return PTR_ERR(opp); + } + + volt = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + volt_old = regulator_get_voltage(arm_reg); + + dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", + old_freq / 1000, volt_old / 1000, + new_freq / 1000, volt / 1000); + + /* scaling up? scale voltage before frequency */ + if (new_freq > old_freq) { + if (!IS_ERR(pu_reg)) { + ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0); + if (ret) { + dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret); + return ret; + } + } + ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0); + if (ret) { + dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret); + return ret; + } + ret = regulator_set_voltage_tol(arm_reg, volt, 0); + if (ret) { + dev_err(cpu_dev, + "failed to scale vddarm up: %d\n", ret); + return ret; + } + } + + /* + * The setpoints are selected per PLL/PDF frequencies, so we need to + * reprogram PLL for frequency scaling. The procedure of reprogramming + * PLL1 is as below. + * For i.MX6UL, it has a secondary clk mux, the cpu frequency change + * flow is slightly different from other i.MX6 OSC. + * The cpu frequeny change flow for i.MX6(except i.MX6UL) is as below: + * - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it + * - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it + * - Disable pll2_pfd2_396m_clk + */ + if (of_machine_is_compatible("fsl,imx6ul") || + of_machine_is_compatible("fsl,imx6ull")) { + /* + * When changing pll1_sw_clk's parent to pll1_sys_clk, + * CPU may run at higher than 528MHz, this will lead to + * the system unstable if the voltage is lower than the + * voltage of 528MHz, so lower the CPU frequency to one + * half before changing CPU frequency. + */ + clk_set_rate(clks[ARM].clk, (old_freq >> 1) * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_BUS].clk); + else + clk_set_parent(clks[SECONDARY_SEL].clk, + clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[STEP].clk, clks[SECONDARY_SEL].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); + if (freq_hz > clk_get_rate(clks[PLL2_BUS].clk)) { + clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + } + } else { + clk_set_parent(clks[STEP].clk, clks[PLL2_PFD2_396M].clk); + clk_set_parent(clks[PLL1_SW].clk, clks[STEP].clk); + if (freq_hz > clk_get_rate(clks[PLL2_PFD2_396M].clk)) { + clk_set_rate(clks[PLL1_SYS].clk, new_freq * 1000); + clk_set_parent(clks[PLL1_SW].clk, clks[PLL1_SYS].clk); + } else { + /* pll1_sys needs to be enabled for divider rate change to work. */ + pll1_sys_temp_enabled = true; + clk_prepare_enable(clks[PLL1_SYS].clk); + } + } + + /* Ensure the arm clock divider is what we expect */ + ret = clk_set_rate(clks[ARM].clk, new_freq * 1000); + if (ret) { + int ret1; + + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); + ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0); + if (ret1) + dev_warn(cpu_dev, + "failed to restore vddarm voltage: %d\n", ret1); + return ret; + } + + /* PLL1 is only needed until after ARM-PODF is set. */ + if (pll1_sys_temp_enabled) + clk_disable_unprepare(clks[PLL1_SYS].clk); + + /* scaling down? scale voltage after frequency */ + if (new_freq < old_freq) { + ret = regulator_set_voltage_tol(arm_reg, volt, 0); + if (ret) + dev_warn(cpu_dev, + "failed to scale vddarm down: %d\n", ret); + ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0); + if (ret) + dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret); + if (!IS_ERR(pu_reg)) { + ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0); + if (ret) + dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret); + } + } + + return 0; +} + +static int imx6q_cpufreq_init(struct cpufreq_policy *policy) +{ + policy->clk = clks[ARM].clk; + cpufreq_generic_init(policy, freq_table, transition_latency); + policy->suspend_freq = max_freq; + + return 0; +} + +static struct cpufreq_driver imx6q_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = imx6q_set_target, + .get = cpufreq_generic_get, + .init = imx6q_cpufreq_init, + .register_em = cpufreq_register_em_with_opp, + .name = "imx6q-cpufreq", + .attr = cpufreq_generic_attr, + .suspend = cpufreq_generic_suspend, +}; + +static void imx6x_disable_freq_in_opp(struct device *dev, unsigned long freq) +{ + int ret = dev_pm_opp_disable(dev, freq); + + if (ret < 0 && ret != -ENODEV) + dev_warn(dev, "failed to disable %ldMHz OPP\n", freq / 1000000); +} + +#define OCOTP_CFG3 0x440 +#define OCOTP_CFG3_SPEED_SHIFT 16 +#define OCOTP_CFG3_SPEED_1P2GHZ 0x3 +#define OCOTP_CFG3_SPEED_996MHZ 0x2 +#define OCOTP_CFG3_SPEED_852MHZ 0x1 + +static int imx6q_opp_check_speed_grading(struct device *dev) +{ + struct device_node *np; + void __iomem *base; + u32 val; + int ret; + + if (of_property_present(dev->of_node, "nvmem-cells")) { + ret = nvmem_cell_read_u32(dev, "speed_grade", &val); + if (ret) + return ret; + } else { + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp"); + if (!np) + return -ENOENT; + + base = of_iomap(np, 0); + of_node_put(np); + if (!base) { + dev_err(dev, "failed to map ocotp\n"); + return -EFAULT; + } + + /* + * SPEED_GRADING[1:0] defines the max speed of ARM: + * 2b'11: 1200000000Hz; + * 2b'10: 996000000Hz; + * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. + * 2b'00: 792000000Hz; + * We need to set the max speed of ARM according to fuse map. + */ + val = readl_relaxed(base + OCOTP_CFG3); + iounmap(base); + } + + val >>= OCOTP_CFG3_SPEED_SHIFT; + val &= 0x3; + + if (val < OCOTP_CFG3_SPEED_996MHZ) + imx6x_disable_freq_in_opp(dev, 996000000); + + if (of_machine_is_compatible("fsl,imx6q") || + of_machine_is_compatible("fsl,imx6qp")) { + if (val != OCOTP_CFG3_SPEED_852MHZ) + imx6x_disable_freq_in_opp(dev, 852000000); + + if (val != OCOTP_CFG3_SPEED_1P2GHZ) + imx6x_disable_freq_in_opp(dev, 1200000000); + } + + return 0; +} + +#define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3 + +static int imx6ul_opp_check_speed_grading(struct device *dev) +{ + u32 val; + int ret = 0; + + if (of_property_present(dev->of_node, "nvmem-cells")) { + ret = nvmem_cell_read_u32(dev, "speed_grade", &val); + if (ret) + return ret; + } else { + struct device_node *np; + void __iomem *base; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "fsl,imx6ull-ocotp"); + if (!np) + return -ENOENT; + + base = of_iomap(np, 0); + of_node_put(np); + if (!base) { + dev_err(dev, "failed to map ocotp\n"); + return -EFAULT; + } + + val = readl_relaxed(base + OCOTP_CFG3); + iounmap(base); + } + + /* + * Speed GRADING[1:0] defines the max speed of ARM: + * 2b'00: Reserved; + * 2b'01: 528000000Hz; + * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL; + * 2b'11: 900000000Hz on i.MX6ULL only; + * We need to set the max speed of ARM according to fuse map. + */ + val >>= OCOTP_CFG3_SPEED_SHIFT; + val &= 0x3; + + if (of_machine_is_compatible("fsl,imx6ul")) + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) + imx6x_disable_freq_in_opp(dev, 696000000); + + if (of_machine_is_compatible("fsl,imx6ull")) { + if (val < OCOTP_CFG3_6ULL_SPEED_792MHZ) + imx6x_disable_freq_in_opp(dev, 792000000); + + if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ) + imx6x_disable_freq_in_opp(dev, 900000000); + } + + return ret; +} + +static int imx6q_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + struct dev_pm_opp *opp; + unsigned long min_volt, max_volt; + int num, ret; + const struct property *prop; + const __be32 *val; + u32 nr, i, j; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("failed to get cpu0 device\n"); + return -ENODEV; + } + + np = of_node_get(cpu_dev->of_node); + if (!np) { + dev_err(cpu_dev, "failed to find cpu0 node\n"); + return -ENOENT; + } + + if (of_machine_is_compatible("fsl,imx6ul") || + of_machine_is_compatible("fsl,imx6ull")) + num_clks = IMX6UL_CPUFREQ_CLK_NUM; + else + num_clks = IMX6Q_CPUFREQ_CLK_NUM; + + ret = clk_bulk_get(cpu_dev, num_clks, clks); + if (ret) + goto put_node; + + arm_reg = regulator_get(cpu_dev, "arm"); + pu_reg = regulator_get_optional(cpu_dev, "pu"); + soc_reg = regulator_get(cpu_dev, "soc"); + if (PTR_ERR(arm_reg) == -EPROBE_DEFER || + PTR_ERR(soc_reg) == -EPROBE_DEFER || + PTR_ERR(pu_reg) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + dev_dbg(cpu_dev, "regulators not ready, defer\n"); + goto put_reg; + } + if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) { + dev_err(cpu_dev, "failed to get regulators\n"); + ret = -ENOENT; + goto put_reg; + } + + ret = dev_pm_opp_of_add_table(cpu_dev); + if (ret < 0) { + dev_err(cpu_dev, "failed to init OPP table: %d\n", ret); + goto put_reg; + } + + if (of_machine_is_compatible("fsl,imx6ul") || + of_machine_is_compatible("fsl,imx6ull")) { + ret = imx6ul_opp_check_speed_grading(cpu_dev); + } else { + ret = imx6q_opp_check_speed_grading(cpu_dev); + } + if (ret) { + dev_err_probe(cpu_dev, ret, "failed to read ocotp\n"); + goto out_free_opp; + } + + num = dev_pm_opp_get_opp_count(cpu_dev); + if (num < 0) { + ret = num; + dev_err(cpu_dev, "no OPP table is found: %d\n", ret); + goto out_free_opp; + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out_free_opp; + } + + /* Make imx6_soc_volt array's size same as arm opp number */ + imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt), + GFP_KERNEL); + if (imx6_soc_volt == NULL) { + ret = -ENOMEM; + goto free_freq_table; + } + + prop = of_find_property(np, "fsl,soc-operating-points", NULL); + if (!prop || !prop->value) + goto soc_opp_out; + + /* + * Each OPP is a set of tuples consisting of frequency and + * voltage like <freq-kHz vol-uV>. + */ + nr = prop->length / sizeof(u32); + if (nr % 2 || (nr / 2) < num) + goto soc_opp_out; + + for (j = 0; j < num; j++) { + val = prop->value; + for (i = 0; i < nr / 2; i++) { + unsigned long freq = be32_to_cpup(val++); + unsigned long volt = be32_to_cpup(val++); + if (freq_table[j].frequency == freq) { + imx6_soc_volt[soc_opp_count++] = volt; + break; + } + } + } + +soc_opp_out: + /* use fixed soc opp volt if no valid soc opp info found in dtb */ + if (soc_opp_count != num) { + dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n"); + for (j = 0; j < num; j++) + imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL; + if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ) + imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH; + } + + if (of_property_read_u32(np, "clock-latency", &transition_latency)) + transition_latency = CPUFREQ_ETERNAL; + + /* + * Calculate the ramp time for max voltage change in the + * VDDSOC and VDDPU regulators. + */ + ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]); + if (ret > 0) + transition_latency += ret * 1000; + if (!IS_ERR(pu_reg)) { + ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]); + if (ret > 0) + transition_latency += ret * 1000; + } + + /* + * OPP is maintained in order of increasing frequency, and + * freq_table initialised from OPP is therefore sorted in the + * same order. + */ + max_freq = freq_table[--num].frequency; + opp = dev_pm_opp_find_freq_exact(cpu_dev, + freq_table[0].frequency * 1000, true); + min_volt = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + opp = dev_pm_opp_find_freq_exact(cpu_dev, max_freq * 1000, true); + max_volt = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt); + if (ret > 0) + transition_latency += ret * 1000; + + ret = cpufreq_register_driver(&imx6q_cpufreq_driver); + if (ret) { + dev_err(cpu_dev, "failed register driver: %d\n", ret); + goto free_freq_table; + } + + of_node_put(np); + return 0; + +free_freq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_free_opp: + dev_pm_opp_of_remove_table(cpu_dev); +put_reg: + if (!IS_ERR(arm_reg)) + regulator_put(arm_reg); + if (!IS_ERR(pu_reg)) + regulator_put(pu_reg); + if (!IS_ERR(soc_reg)) + regulator_put(soc_reg); + + clk_bulk_put(num_clks, clks); +put_node: + of_node_put(np); + + return ret; +} + +static int imx6q_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&imx6q_cpufreq_driver); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); + dev_pm_opp_of_remove_table(cpu_dev); + regulator_put(arm_reg); + if (!IS_ERR(pu_reg)) + regulator_put(pu_reg); + regulator_put(soc_reg); + + clk_bulk_put(num_clks, clks); + + return 0; +} + +static struct platform_driver imx6q_cpufreq_platdrv = { + .driver = { + .name = "imx6q-cpufreq", + }, + .probe = imx6q_cpufreq_probe, + .remove = imx6q_cpufreq_remove, +}; +module_platform_driver(imx6q_cpufreq_platdrv); + +MODULE_ALIAS("platform:imx6q-cpufreq"); +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c new file mode 100644 index 000000000..abdd26f7d --- /dev/null +++ b/drivers/cpufreq/intel_pstate.c @@ -0,0 +1,3537 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * intel_pstate.c: Native P state management for Intel processors + * + * (C) Copyright 2012 Intel Corporation + * Author: Dirk Brandewie <dirk.j.brandewie@intel.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/ktime.h> +#include <linux/hrtimer.h> +#include <linux/tick.h> +#include <linux/slab.h> +#include <linux/sched/cpufreq.h> +#include <linux/list.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/sysfs.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/acpi.h> +#include <linux/vmalloc.h> +#include <linux/pm_qos.h> +#include <trace/events/power.h> + +#include <asm/cpu.h> +#include <asm/div64.h> +#include <asm/msr.h> +#include <asm/cpu_device_id.h> +#include <asm/cpufeature.h> +#include <asm/intel-family.h> +#include "../drivers/thermal/intel/thermal_interrupt.h" + +#define INTEL_PSTATE_SAMPLING_INTERVAL (10 * NSEC_PER_MSEC) + +#define INTEL_CPUFREQ_TRANSITION_LATENCY 20000 +#define INTEL_CPUFREQ_TRANSITION_DELAY_HWP 5000 +#define INTEL_CPUFREQ_TRANSITION_DELAY 500 + +#ifdef CONFIG_ACPI +#include <acpi/processor.h> +#include <acpi/cppc_acpi.h> +#endif + +#define FRAC_BITS 8 +#define int_tofp(X) ((int64_t)(X) << FRAC_BITS) +#define fp_toint(X) ((X) >> FRAC_BITS) + +#define ONE_EIGHTH_FP ((int64_t)1 << (FRAC_BITS - 3)) + +#define EXT_BITS 6 +#define EXT_FRAC_BITS (EXT_BITS + FRAC_BITS) +#define fp_ext_toint(X) ((X) >> EXT_FRAC_BITS) +#define int_ext_tofp(X) ((int64_t)(X) << EXT_FRAC_BITS) + +static inline int32_t mul_fp(int32_t x, int32_t y) +{ + return ((int64_t)x * (int64_t)y) >> FRAC_BITS; +} + +static inline int32_t div_fp(s64 x, s64 y) +{ + return div64_s64((int64_t)x << FRAC_BITS, y); +} + +static inline int ceiling_fp(int32_t x) +{ + int mask, ret; + + ret = fp_toint(x); + mask = (1 << FRAC_BITS) - 1; + if (x & mask) + ret += 1; + return ret; +} + +static inline u64 mul_ext_fp(u64 x, u64 y) +{ + return (x * y) >> EXT_FRAC_BITS; +} + +static inline u64 div_ext_fp(u64 x, u64 y) +{ + return div64_u64(x << EXT_FRAC_BITS, y); +} + +/** + * struct sample - Store performance sample + * @core_avg_perf: Ratio of APERF/MPERF which is the actual average + * performance during last sample period + * @busy_scaled: Scaled busy value which is used to calculate next + * P state. This can be different than core_avg_perf + * to account for cpu idle period + * @aperf: Difference of actual performance frequency clock count + * read from APERF MSR between last and current sample + * @mperf: Difference of maximum performance frequency clock count + * read from MPERF MSR between last and current sample + * @tsc: Difference of time stamp counter between last and + * current sample + * @time: Current time from scheduler + * + * This structure is used in the cpudata structure to store performance sample + * data for choosing next P State. + */ +struct sample { + int32_t core_avg_perf; + int32_t busy_scaled; + u64 aperf; + u64 mperf; + u64 tsc; + u64 time; +}; + +/** + * struct pstate_data - Store P state data + * @current_pstate: Current requested P state + * @min_pstate: Min P state possible for this platform + * @max_pstate: Max P state possible for this platform + * @max_pstate_physical:This is physical Max P state for a processor + * This can be higher than the max_pstate which can + * be limited by platform thermal design power limits + * @perf_ctl_scaling: PERF_CTL P-state to frequency scaling factor + * @scaling: Scaling factor between performance and frequency + * @turbo_pstate: Max Turbo P state possible for this platform + * @min_freq: @min_pstate frequency in cpufreq units + * @max_freq: @max_pstate frequency in cpufreq units + * @turbo_freq: @turbo_pstate frequency in cpufreq units + * + * Stores the per cpu model P state limits and current P state. + */ +struct pstate_data { + int current_pstate; + int min_pstate; + int max_pstate; + int max_pstate_physical; + int perf_ctl_scaling; + int scaling; + int turbo_pstate; + unsigned int min_freq; + unsigned int max_freq; + unsigned int turbo_freq; +}; + +/** + * struct vid_data - Stores voltage information data + * @min: VID data for this platform corresponding to + * the lowest P state + * @max: VID data corresponding to the highest P State. + * @turbo: VID data for turbo P state + * @ratio: Ratio of (vid max - vid min) / + * (max P state - Min P State) + * + * Stores the voltage data for DVFS (Dynamic Voltage and Frequency Scaling) + * This data is used in Atom platforms, where in addition to target P state, + * the voltage data needs to be specified to select next P State. + */ +struct vid_data { + int min; + int max; + int turbo; + int32_t ratio; +}; + +/** + * struct global_params - Global parameters, mostly tunable via sysfs. + * @no_turbo: Whether or not to use turbo P-states. + * @turbo_disabled: Whether or not turbo P-states are available at all, + * based on the MSR_IA32_MISC_ENABLE value and whether or + * not the maximum reported turbo P-state is different from + * the maximum reported non-turbo one. + * @turbo_disabled_mf: The @turbo_disabled value reflected by cpuinfo.max_freq. + * @min_perf_pct: Minimum capacity limit in percent of the maximum turbo + * P-state capacity. + * @max_perf_pct: Maximum capacity limit in percent of the maximum turbo + * P-state capacity. + */ +struct global_params { + bool no_turbo; + bool turbo_disabled; + bool turbo_disabled_mf; + int max_perf_pct; + int min_perf_pct; +}; + +/** + * struct cpudata - Per CPU instance data storage + * @cpu: CPU number for this instance data + * @policy: CPUFreq policy value + * @update_util: CPUFreq utility callback information + * @update_util_set: CPUFreq utility callback is set + * @iowait_boost: iowait-related boost fraction + * @last_update: Time of the last update. + * @pstate: Stores P state limits for this CPU + * @vid: Stores VID limits for this CPU + * @last_sample_time: Last Sample time + * @aperf_mperf_shift: APERF vs MPERF counting frequency difference + * @prev_aperf: Last APERF value read from APERF MSR + * @prev_mperf: Last MPERF value read from MPERF MSR + * @prev_tsc: Last timestamp counter (TSC) value + * @prev_cummulative_iowait: IO Wait time difference from last and + * current sample + * @sample: Storage for storing last Sample data + * @min_perf_ratio: Minimum capacity in terms of PERF or HWP ratios + * @max_perf_ratio: Maximum capacity in terms of PERF or HWP ratios + * @acpi_perf_data: Stores ACPI perf information read from _PSS + * @valid_pss_table: Set to true for valid ACPI _PSS entries found + * @epp_powersave: Last saved HWP energy performance preference + * (EPP) or energy performance bias (EPB), + * when policy switched to performance + * @epp_policy: Last saved policy used to set EPP/EPB + * @epp_default: Power on default HWP energy performance + * preference/bias + * @epp_cached Cached HWP energy-performance preference value + * @hwp_req_cached: Cached value of the last HWP Request MSR + * @hwp_cap_cached: Cached value of the last HWP Capabilities MSR + * @last_io_update: Last time when IO wake flag was set + * @sched_flags: Store scheduler flags for possible cross CPU update + * @hwp_boost_min: Last HWP boosted min performance + * @suspended: Whether or not the driver has been suspended. + * @hwp_notify_work: workqueue for HWP notifications. + * + * This structure stores per CPU instance data for all CPUs. + */ +struct cpudata { + int cpu; + + unsigned int policy; + struct update_util_data update_util; + bool update_util_set; + + struct pstate_data pstate; + struct vid_data vid; + + u64 last_update; + u64 last_sample_time; + u64 aperf_mperf_shift; + u64 prev_aperf; + u64 prev_mperf; + u64 prev_tsc; + u64 prev_cummulative_iowait; + struct sample sample; + int32_t min_perf_ratio; + int32_t max_perf_ratio; +#ifdef CONFIG_ACPI + struct acpi_processor_performance acpi_perf_data; + bool valid_pss_table; +#endif + unsigned int iowait_boost; + s16 epp_powersave; + s16 epp_policy; + s16 epp_default; + s16 epp_cached; + u64 hwp_req_cached; + u64 hwp_cap_cached; + u64 last_io_update; + unsigned int sched_flags; + u32 hwp_boost_min; + bool suspended; + struct delayed_work hwp_notify_work; +}; + +static struct cpudata **all_cpu_data; + +/** + * struct pstate_funcs - Per CPU model specific callbacks + * @get_max: Callback to get maximum non turbo effective P state + * @get_max_physical: Callback to get maximum non turbo physical P state + * @get_min: Callback to get minimum P state + * @get_turbo: Callback to get turbo P state + * @get_scaling: Callback to get frequency scaling factor + * @get_cpu_scaling: Get frequency scaling factor for a given cpu + * @get_aperf_mperf_shift: Callback to get the APERF vs MPERF frequency difference + * @get_val: Callback to convert P state to actual MSR write value + * @get_vid: Callback to get VID data for Atom platforms + * + * Core and Atom CPU models have different way to get P State limits. This + * structure is used to store those callbacks. + */ +struct pstate_funcs { + int (*get_max)(int cpu); + int (*get_max_physical)(int cpu); + int (*get_min)(int cpu); + int (*get_turbo)(int cpu); + int (*get_scaling)(void); + int (*get_cpu_scaling)(int cpu); + int (*get_aperf_mperf_shift)(void); + u64 (*get_val)(struct cpudata*, int pstate); + void (*get_vid)(struct cpudata *); +}; + +static struct pstate_funcs pstate_funcs __read_mostly; + +static int hwp_active __read_mostly; +static int hwp_mode_bdw __read_mostly; +static bool per_cpu_limits __read_mostly; +static bool hwp_boost __read_mostly; + +static struct cpufreq_driver *intel_pstate_driver __read_mostly; + +#ifdef CONFIG_ACPI +static bool acpi_ppc; +#endif + +static struct global_params global; + +static DEFINE_MUTEX(intel_pstate_driver_lock); +static DEFINE_MUTEX(intel_pstate_limits_lock); + +#ifdef CONFIG_ACPI + +static bool intel_pstate_acpi_pm_profile_server(void) +{ + if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER || + acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER) + return true; + + return false; +} + +static bool intel_pstate_get_ppc_enable_status(void) +{ + if (intel_pstate_acpi_pm_profile_server()) + return true; + + return acpi_ppc; +} + +#ifdef CONFIG_ACPI_CPPC_LIB + +/* The work item is needed to avoid CPU hotplug locking issues */ +static void intel_pstste_sched_itmt_work_fn(struct work_struct *work) +{ + sched_set_itmt_support(); +} + +static DECLARE_WORK(sched_itmt_work, intel_pstste_sched_itmt_work_fn); + +#define CPPC_MAX_PERF U8_MAX + +static void intel_pstate_set_itmt_prio(int cpu) +{ + struct cppc_perf_caps cppc_perf; + static u32 max_highest_perf = 0, min_highest_perf = U32_MAX; + int ret; + + ret = cppc_get_perf_caps(cpu, &cppc_perf); + if (ret) + return; + + /* + * On some systems with overclocking enabled, CPPC.highest_perf is hardcoded to 0xff. + * In this case we can't use CPPC.highest_perf to enable ITMT. + * In this case we can look at MSR_HWP_CAPABILITIES bits [8:0] to decide. + */ + if (cppc_perf.highest_perf == CPPC_MAX_PERF) + cppc_perf.highest_perf = HWP_HIGHEST_PERF(READ_ONCE(all_cpu_data[cpu]->hwp_cap_cached)); + + /* + * The priorities can be set regardless of whether or not + * sched_set_itmt_support(true) has been called and it is valid to + * update them at any time after it has been called. + */ + sched_set_itmt_core_prio(cppc_perf.highest_perf, cpu); + + if (max_highest_perf <= min_highest_perf) { + if (cppc_perf.highest_perf > max_highest_perf) + max_highest_perf = cppc_perf.highest_perf; + + if (cppc_perf.highest_perf < min_highest_perf) + min_highest_perf = cppc_perf.highest_perf; + + if (max_highest_perf > min_highest_perf) { + /* + * This code can be run during CPU online under the + * CPU hotplug locks, so sched_set_itmt_support() + * cannot be called from here. Queue up a work item + * to invoke it. + */ + schedule_work(&sched_itmt_work); + } + } +} + +static int intel_pstate_get_cppc_guaranteed(int cpu) +{ + struct cppc_perf_caps cppc_perf; + int ret; + + ret = cppc_get_perf_caps(cpu, &cppc_perf); + if (ret) + return ret; + + if (cppc_perf.guaranteed_perf) + return cppc_perf.guaranteed_perf; + + return cppc_perf.nominal_perf; +} +#else /* CONFIG_ACPI_CPPC_LIB */ +static inline void intel_pstate_set_itmt_prio(int cpu) +{ +} +#endif /* CONFIG_ACPI_CPPC_LIB */ + +static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + int ret; + int i; + + if (hwp_active) { + intel_pstate_set_itmt_prio(policy->cpu); + return; + } + + if (!intel_pstate_get_ppc_enable_status()) + return; + + cpu = all_cpu_data[policy->cpu]; + + ret = acpi_processor_register_performance(&cpu->acpi_perf_data, + policy->cpu); + if (ret) + return; + + /* + * Check if the control value in _PSS is for PERF_CTL MSR, which should + * guarantee that the states returned by it map to the states in our + * list directly. + */ + if (cpu->acpi_perf_data.control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) + goto err; + + /* + * If there is only one entry _PSS, simply ignore _PSS and continue as + * usual without taking _PSS into account + */ + if (cpu->acpi_perf_data.state_count < 2) + goto err; + + pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu); + for (i = 0; i < cpu->acpi_perf_data.state_count; i++) { + pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n", + (i == cpu->acpi_perf_data.state ? '*' : ' '), i, + (u32) cpu->acpi_perf_data.states[i].core_frequency, + (u32) cpu->acpi_perf_data.states[i].power, + (u32) cpu->acpi_perf_data.states[i].control); + } + + cpu->valid_pss_table = true; + pr_debug("_PPC limits will be enforced\n"); + + return; + + err: + cpu->valid_pss_table = false; + acpi_processor_unregister_performance(policy->cpu); +} + +static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + + cpu = all_cpu_data[policy->cpu]; + if (!cpu->valid_pss_table) + return; + + acpi_processor_unregister_performance(policy->cpu); +} +#else /* CONFIG_ACPI */ +static inline void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) +{ +} + +static inline void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) +{ +} + +static inline bool intel_pstate_acpi_pm_profile_server(void) +{ + return false; +} +#endif /* CONFIG_ACPI */ + +#ifndef CONFIG_ACPI_CPPC_LIB +static inline int intel_pstate_get_cppc_guaranteed(int cpu) +{ + return -ENOTSUPP; +} +#endif /* CONFIG_ACPI_CPPC_LIB */ + +static int intel_pstate_freq_to_hwp_rel(struct cpudata *cpu, int freq, + unsigned int relation) +{ + if (freq == cpu->pstate.turbo_freq) + return cpu->pstate.turbo_pstate; + + if (freq == cpu->pstate.max_freq) + return cpu->pstate.max_pstate; + + switch (relation) { + case CPUFREQ_RELATION_H: + return freq / cpu->pstate.scaling; + case CPUFREQ_RELATION_C: + return DIV_ROUND_CLOSEST(freq, cpu->pstate.scaling); + } + + return DIV_ROUND_UP(freq, cpu->pstate.scaling); +} + +static int intel_pstate_freq_to_hwp(struct cpudata *cpu, int freq) +{ + return intel_pstate_freq_to_hwp_rel(cpu, freq, CPUFREQ_RELATION_L); +} + +/** + * intel_pstate_hybrid_hwp_adjust - Calibrate HWP performance levels. + * @cpu: Target CPU. + * + * On hybrid processors, HWP may expose more performance levels than there are + * P-states accessible through the PERF_CTL interface. If that happens, the + * scaling factor between HWP performance levels and CPU frequency will be less + * than the scaling factor between P-state values and CPU frequency. + * + * In that case, adjust the CPU parameters used in computations accordingly. + */ +static void intel_pstate_hybrid_hwp_adjust(struct cpudata *cpu) +{ + int perf_ctl_max_phys = cpu->pstate.max_pstate_physical; + int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling; + int perf_ctl_turbo = pstate_funcs.get_turbo(cpu->cpu); + int scaling = cpu->pstate.scaling; + int freq; + + pr_debug("CPU%d: perf_ctl_max_phys = %d\n", cpu->cpu, perf_ctl_max_phys); + pr_debug("CPU%d: perf_ctl_turbo = %d\n", cpu->cpu, perf_ctl_turbo); + pr_debug("CPU%d: perf_ctl_scaling = %d\n", cpu->cpu, perf_ctl_scaling); + pr_debug("CPU%d: HWP_CAP guaranteed = %d\n", cpu->cpu, cpu->pstate.max_pstate); + pr_debug("CPU%d: HWP_CAP highest = %d\n", cpu->cpu, cpu->pstate.turbo_pstate); + pr_debug("CPU%d: HWP-to-frequency scaling factor: %d\n", cpu->cpu, scaling); + + cpu->pstate.turbo_freq = rounddown(cpu->pstate.turbo_pstate * scaling, + perf_ctl_scaling); + cpu->pstate.max_freq = rounddown(cpu->pstate.max_pstate * scaling, + perf_ctl_scaling); + + freq = perf_ctl_max_phys * perf_ctl_scaling; + cpu->pstate.max_pstate_physical = intel_pstate_freq_to_hwp(cpu, freq); + + freq = cpu->pstate.min_pstate * perf_ctl_scaling; + cpu->pstate.min_freq = freq; + /* + * Cast the min P-state value retrieved via pstate_funcs.get_min() to + * the effective range of HWP performance levels. + */ + cpu->pstate.min_pstate = intel_pstate_freq_to_hwp(cpu, freq); +} + +static inline void update_turbo_state(void) +{ + u64 misc_en; + struct cpudata *cpu; + + cpu = all_cpu_data[0]; + rdmsrl(MSR_IA32_MISC_ENABLE, misc_en); + global.turbo_disabled = + (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE || + cpu->pstate.max_pstate == cpu->pstate.turbo_pstate); +} + +static int min_perf_pct_min(void) +{ + struct cpudata *cpu = all_cpu_data[0]; + int turbo_pstate = cpu->pstate.turbo_pstate; + + return turbo_pstate ? + (cpu->pstate.min_pstate * 100 / turbo_pstate) : 0; +} + +static s16 intel_pstate_get_epb(struct cpudata *cpu_data) +{ + u64 epb; + int ret; + + if (!boot_cpu_has(X86_FEATURE_EPB)) + return -ENXIO; + + ret = rdmsrl_on_cpu(cpu_data->cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); + if (ret) + return (s16)ret; + + return (s16)(epb & 0x0f); +} + +static s16 intel_pstate_get_epp(struct cpudata *cpu_data, u64 hwp_req_data) +{ + s16 epp; + + if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { + /* + * When hwp_req_data is 0, means that caller didn't read + * MSR_HWP_REQUEST, so need to read and get EPP. + */ + if (!hwp_req_data) { + epp = rdmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, + &hwp_req_data); + if (epp) + return epp; + } + epp = (hwp_req_data >> 24) & 0xff; + } else { + /* When there is no EPP present, HWP uses EPB settings */ + epp = intel_pstate_get_epb(cpu_data); + } + + return epp; +} + +static int intel_pstate_set_epb(int cpu, s16 pref) +{ + u64 epb; + int ret; + + if (!boot_cpu_has(X86_FEATURE_EPB)) + return -ENXIO; + + ret = rdmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); + if (ret) + return ret; + + epb = (epb & ~0x0f) | pref; + wrmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, epb); + + return 0; +} + +/* + * EPP/EPB display strings corresponding to EPP index in the + * energy_perf_strings[] + * index String + *------------------------------------- + * 0 default + * 1 performance + * 2 balance_performance + * 3 balance_power + * 4 power + */ + +enum energy_perf_value_index { + EPP_INDEX_DEFAULT = 0, + EPP_INDEX_PERFORMANCE, + EPP_INDEX_BALANCE_PERFORMANCE, + EPP_INDEX_BALANCE_POWERSAVE, + EPP_INDEX_POWERSAVE, +}; + +static const char * const energy_perf_strings[] = { + [EPP_INDEX_DEFAULT] = "default", + [EPP_INDEX_PERFORMANCE] = "performance", + [EPP_INDEX_BALANCE_PERFORMANCE] = "balance_performance", + [EPP_INDEX_BALANCE_POWERSAVE] = "balance_power", + [EPP_INDEX_POWERSAVE] = "power", + NULL +}; +static unsigned int epp_values[] = { + [EPP_INDEX_DEFAULT] = 0, /* Unused index */ + [EPP_INDEX_PERFORMANCE] = HWP_EPP_PERFORMANCE, + [EPP_INDEX_BALANCE_PERFORMANCE] = HWP_EPP_BALANCE_PERFORMANCE, + [EPP_INDEX_BALANCE_POWERSAVE] = HWP_EPP_BALANCE_POWERSAVE, + [EPP_INDEX_POWERSAVE] = HWP_EPP_POWERSAVE, +}; + +static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data, int *raw_epp) +{ + s16 epp; + int index = -EINVAL; + + *raw_epp = 0; + epp = intel_pstate_get_epp(cpu_data, 0); + if (epp < 0) + return epp; + + if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { + if (epp == epp_values[EPP_INDEX_PERFORMANCE]) + return EPP_INDEX_PERFORMANCE; + if (epp == epp_values[EPP_INDEX_BALANCE_PERFORMANCE]) + return EPP_INDEX_BALANCE_PERFORMANCE; + if (epp == epp_values[EPP_INDEX_BALANCE_POWERSAVE]) + return EPP_INDEX_BALANCE_POWERSAVE; + if (epp == epp_values[EPP_INDEX_POWERSAVE]) + return EPP_INDEX_POWERSAVE; + *raw_epp = epp; + return 0; + } else if (boot_cpu_has(X86_FEATURE_EPB)) { + /* + * Range: + * 0x00-0x03 : Performance + * 0x04-0x07 : Balance performance + * 0x08-0x0B : Balance power + * 0x0C-0x0F : Power + * The EPB is a 4 bit value, but our ranges restrict the + * value which can be set. Here only using top two bits + * effectively. + */ + index = (epp >> 2) + 1; + } + + return index; +} + +static int intel_pstate_set_epp(struct cpudata *cpu, u32 epp) +{ + int ret; + + /* + * Use the cached HWP Request MSR value, because in the active mode the + * register itself may be updated by intel_pstate_hwp_boost_up() or + * intel_pstate_hwp_boost_down() at any time. + */ + u64 value = READ_ONCE(cpu->hwp_req_cached); + + value &= ~GENMASK_ULL(31, 24); + value |= (u64)epp << 24; + /* + * The only other updater of hwp_req_cached in the active mode, + * intel_pstate_hwp_set(), is called under the same lock as this + * function, so it cannot run in parallel with the update below. + */ + WRITE_ONCE(cpu->hwp_req_cached, value); + ret = wrmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, value); + if (!ret) + cpu->epp_cached = epp; + + return ret; +} + +static int intel_pstate_set_energy_pref_index(struct cpudata *cpu_data, + int pref_index, bool use_raw, + u32 raw_epp) +{ + int epp = -EINVAL; + int ret; + + if (!pref_index) + epp = cpu_data->epp_default; + + if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { + if (use_raw) + epp = raw_epp; + else if (epp == -EINVAL) + epp = epp_values[pref_index]; + + /* + * To avoid confusion, refuse to set EPP to any values different + * from 0 (performance) if the current policy is "performance", + * because those values would be overridden. + */ + if (epp > 0 && cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) + return -EBUSY; + + ret = intel_pstate_set_epp(cpu_data, epp); + } else { + if (epp == -EINVAL) + epp = (pref_index - 1) << 2; + ret = intel_pstate_set_epb(cpu_data->cpu, epp); + } + + return ret; +} + +static ssize_t show_energy_performance_available_preferences( + struct cpufreq_policy *policy, char *buf) +{ + int i = 0; + int ret = 0; + + while (energy_perf_strings[i] != NULL) + ret += sprintf(&buf[ret], "%s ", energy_perf_strings[i++]); + + ret += sprintf(&buf[ret], "\n"); + + return ret; +} + +cpufreq_freq_attr_ro(energy_performance_available_preferences); + +static struct cpufreq_driver intel_pstate; + +static ssize_t store_energy_performance_preference( + struct cpufreq_policy *policy, const char *buf, size_t count) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + char str_preference[21]; + bool raw = false; + ssize_t ret; + u32 epp = 0; + + ret = sscanf(buf, "%20s", str_preference); + if (ret != 1) + return -EINVAL; + + ret = match_string(energy_perf_strings, -1, str_preference); + if (ret < 0) { + if (!boot_cpu_has(X86_FEATURE_HWP_EPP)) + return ret; + + ret = kstrtouint(buf, 10, &epp); + if (ret) + return ret; + + if (epp > 255) + return -EINVAL; + + raw = true; + } + + /* + * This function runs with the policy R/W semaphore held, which + * guarantees that the driver pointer will not change while it is + * running. + */ + if (!intel_pstate_driver) + return -EAGAIN; + + mutex_lock(&intel_pstate_limits_lock); + + if (intel_pstate_driver == &intel_pstate) { + ret = intel_pstate_set_energy_pref_index(cpu, ret, raw, epp); + } else { + /* + * In the passive mode the governor needs to be stopped on the + * target CPU before the EPP update and restarted after it, + * which is super-heavy-weight, so make sure it is worth doing + * upfront. + */ + if (!raw) + epp = ret ? epp_values[ret] : cpu->epp_default; + + if (cpu->epp_cached != epp) { + int err; + + cpufreq_stop_governor(policy); + ret = intel_pstate_set_epp(cpu, epp); + err = cpufreq_start_governor(policy); + if (!ret) + ret = err; + } else { + ret = 0; + } + } + + mutex_unlock(&intel_pstate_limits_lock); + + return ret ?: count; +} + +static ssize_t show_energy_performance_preference( + struct cpufreq_policy *policy, char *buf) +{ + struct cpudata *cpu_data = all_cpu_data[policy->cpu]; + int preference, raw_epp; + + preference = intel_pstate_get_energy_pref_index(cpu_data, &raw_epp); + if (preference < 0) + return preference; + + if (raw_epp) + return sprintf(buf, "%d\n", raw_epp); + else + return sprintf(buf, "%s\n", energy_perf_strings[preference]); +} + +cpufreq_freq_attr_rw(energy_performance_preference); + +static ssize_t show_base_frequency(struct cpufreq_policy *policy, char *buf) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + int ratio, freq; + + ratio = intel_pstate_get_cppc_guaranteed(policy->cpu); + if (ratio <= 0) { + u64 cap; + + rdmsrl_on_cpu(policy->cpu, MSR_HWP_CAPABILITIES, &cap); + ratio = HWP_GUARANTEED_PERF(cap); + } + + freq = ratio * cpu->pstate.scaling; + if (cpu->pstate.scaling != cpu->pstate.perf_ctl_scaling) + freq = rounddown(freq, cpu->pstate.perf_ctl_scaling); + + return sprintf(buf, "%d\n", freq); +} + +cpufreq_freq_attr_ro(base_frequency); + +static struct freq_attr *hwp_cpufreq_attrs[] = { + &energy_performance_preference, + &energy_performance_available_preferences, + &base_frequency, + NULL, +}; + +static void __intel_pstate_get_hwp_cap(struct cpudata *cpu) +{ + u64 cap; + + rdmsrl_on_cpu(cpu->cpu, MSR_HWP_CAPABILITIES, &cap); + WRITE_ONCE(cpu->hwp_cap_cached, cap); + cpu->pstate.max_pstate = HWP_GUARANTEED_PERF(cap); + cpu->pstate.turbo_pstate = HWP_HIGHEST_PERF(cap); +} + +static void intel_pstate_get_hwp_cap(struct cpudata *cpu) +{ + int scaling = cpu->pstate.scaling; + + __intel_pstate_get_hwp_cap(cpu); + + cpu->pstate.max_freq = cpu->pstate.max_pstate * scaling; + cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * scaling; + if (scaling != cpu->pstate.perf_ctl_scaling) { + int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling; + + cpu->pstate.max_freq = rounddown(cpu->pstate.max_freq, + perf_ctl_scaling); + cpu->pstate.turbo_freq = rounddown(cpu->pstate.turbo_freq, + perf_ctl_scaling); + } +} + +static void intel_pstate_hwp_set(unsigned int cpu) +{ + struct cpudata *cpu_data = all_cpu_data[cpu]; + int max, min; + u64 value; + s16 epp; + + max = cpu_data->max_perf_ratio; + min = cpu_data->min_perf_ratio; + + if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) + min = max; + + rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value); + + value &= ~HWP_MIN_PERF(~0L); + value |= HWP_MIN_PERF(min); + + value &= ~HWP_MAX_PERF(~0L); + value |= HWP_MAX_PERF(max); + + if (cpu_data->epp_policy == cpu_data->policy) + goto skip_epp; + + cpu_data->epp_policy = cpu_data->policy; + + if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) { + epp = intel_pstate_get_epp(cpu_data, value); + cpu_data->epp_powersave = epp; + /* If EPP read was failed, then don't try to write */ + if (epp < 0) + goto skip_epp; + + epp = 0; + } else { + /* skip setting EPP, when saved value is invalid */ + if (cpu_data->epp_powersave < 0) + goto skip_epp; + + /* + * No need to restore EPP when it is not zero. This + * means: + * - Policy is not changed + * - user has manually changed + * - Error reading EPB + */ + epp = intel_pstate_get_epp(cpu_data, value); + if (epp) + goto skip_epp; + + epp = cpu_data->epp_powersave; + } + if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { + value &= ~GENMASK_ULL(31, 24); + value |= (u64)epp << 24; + } else { + intel_pstate_set_epb(cpu, epp); + } +skip_epp: + WRITE_ONCE(cpu_data->hwp_req_cached, value); + wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); +} + +static void intel_pstate_disable_hwp_interrupt(struct cpudata *cpudata); + +static void intel_pstate_hwp_offline(struct cpudata *cpu) +{ + u64 value = READ_ONCE(cpu->hwp_req_cached); + int min_perf; + + intel_pstate_disable_hwp_interrupt(cpu); + + if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { + /* + * In case the EPP has been set to "performance" by the + * active mode "performance" scaling algorithm, replace that + * temporary value with the cached EPP one. + */ + value &= ~GENMASK_ULL(31, 24); + value |= HWP_ENERGY_PERF_PREFERENCE(cpu->epp_cached); + /* + * However, make sure that EPP will be set to "performance" when + * the CPU is brought back online again and the "performance" + * scaling algorithm is still in effect. + */ + cpu->epp_policy = CPUFREQ_POLICY_UNKNOWN; + } + + /* + * Clear the desired perf field in the cached HWP request value to + * prevent nonzero desired values from being leaked into the active + * mode. + */ + value &= ~HWP_DESIRED_PERF(~0L); + WRITE_ONCE(cpu->hwp_req_cached, value); + + value &= ~GENMASK_ULL(31, 0); + min_perf = HWP_LOWEST_PERF(READ_ONCE(cpu->hwp_cap_cached)); + + /* Set hwp_max = hwp_min */ + value |= HWP_MAX_PERF(min_perf); + value |= HWP_MIN_PERF(min_perf); + + /* Set EPP to min */ + if (boot_cpu_has(X86_FEATURE_HWP_EPP)) + value |= HWP_ENERGY_PERF_PREFERENCE(HWP_EPP_POWERSAVE); + + wrmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, value); +} + +#define POWER_CTL_EE_ENABLE 1 +#define POWER_CTL_EE_DISABLE 2 + +static int power_ctl_ee_state; + +static void set_power_ctl_ee_state(bool input) +{ + u64 power_ctl; + + mutex_lock(&intel_pstate_driver_lock); + rdmsrl(MSR_IA32_POWER_CTL, power_ctl); + if (input) { + power_ctl &= ~BIT(MSR_IA32_POWER_CTL_BIT_EE); + power_ctl_ee_state = POWER_CTL_EE_ENABLE; + } else { + power_ctl |= BIT(MSR_IA32_POWER_CTL_BIT_EE); + power_ctl_ee_state = POWER_CTL_EE_DISABLE; + } + wrmsrl(MSR_IA32_POWER_CTL, power_ctl); + mutex_unlock(&intel_pstate_driver_lock); +} + +static void intel_pstate_hwp_enable(struct cpudata *cpudata); + +static void intel_pstate_hwp_reenable(struct cpudata *cpu) +{ + intel_pstate_hwp_enable(cpu); + wrmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, READ_ONCE(cpu->hwp_req_cached)); +} + +static int intel_pstate_suspend(struct cpufreq_policy *policy) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + + pr_debug("CPU %d suspending\n", cpu->cpu); + + cpu->suspended = true; + + /* disable HWP interrupt and cancel any pending work */ + intel_pstate_disable_hwp_interrupt(cpu); + + return 0; +} + +static int intel_pstate_resume(struct cpufreq_policy *policy) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + + pr_debug("CPU %d resuming\n", cpu->cpu); + + /* Only restore if the system default is changed */ + if (power_ctl_ee_state == POWER_CTL_EE_ENABLE) + set_power_ctl_ee_state(true); + else if (power_ctl_ee_state == POWER_CTL_EE_DISABLE) + set_power_ctl_ee_state(false); + + if (cpu->suspended && hwp_active) { + mutex_lock(&intel_pstate_limits_lock); + + /* Re-enable HWP, because "online" has not done that. */ + intel_pstate_hwp_reenable(cpu); + + mutex_unlock(&intel_pstate_limits_lock); + } + + cpu->suspended = false; + + return 0; +} + +static void intel_pstate_update_policies(void) +{ + int cpu; + + for_each_possible_cpu(cpu) + cpufreq_update_policy(cpu); +} + +static void __intel_pstate_update_max_freq(struct cpudata *cpudata, + struct cpufreq_policy *policy) +{ + policy->cpuinfo.max_freq = global.turbo_disabled_mf ? + cpudata->pstate.max_freq : cpudata->pstate.turbo_freq; + refresh_frequency_limits(policy); +} + +static void intel_pstate_update_max_freq(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu); + + if (!policy) + return; + + __intel_pstate_update_max_freq(all_cpu_data[cpu], policy); + + cpufreq_cpu_release(policy); +} + +static void intel_pstate_update_limits(unsigned int cpu) +{ + mutex_lock(&intel_pstate_driver_lock); + + update_turbo_state(); + /* + * If turbo has been turned on or off globally, policy limits for + * all CPUs need to be updated to reflect that. + */ + if (global.turbo_disabled_mf != global.turbo_disabled) { + global.turbo_disabled_mf = global.turbo_disabled; + arch_set_max_freq_ratio(global.turbo_disabled); + for_each_possible_cpu(cpu) + intel_pstate_update_max_freq(cpu); + } else { + cpufreq_update_policy(cpu); + } + + mutex_unlock(&intel_pstate_driver_lock); +} + +/************************** sysfs begin ************************/ +#define show_one(file_name, object) \ + static ssize_t show_##file_name \ + (struct kobject *kobj, struct kobj_attribute *attr, char *buf) \ + { \ + return sprintf(buf, "%u\n", global.object); \ + } + +static ssize_t intel_pstate_show_status(char *buf); +static int intel_pstate_update_status(const char *buf, size_t size); + +static ssize_t show_status(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + ssize_t ret; + + mutex_lock(&intel_pstate_driver_lock); + ret = intel_pstate_show_status(buf); + mutex_unlock(&intel_pstate_driver_lock); + + return ret; +} + +static ssize_t store_status(struct kobject *a, struct kobj_attribute *b, + const char *buf, size_t count) +{ + char *p = memchr(buf, '\n', count); + int ret; + + mutex_lock(&intel_pstate_driver_lock); + ret = intel_pstate_update_status(buf, p ? p - buf : count); + mutex_unlock(&intel_pstate_driver_lock); + + return ret < 0 ? ret : count; +} + +static ssize_t show_turbo_pct(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + struct cpudata *cpu; + int total, no_turbo, turbo_pct; + uint32_t turbo_fp; + + mutex_lock(&intel_pstate_driver_lock); + + if (!intel_pstate_driver) { + mutex_unlock(&intel_pstate_driver_lock); + return -EAGAIN; + } + + cpu = all_cpu_data[0]; + + total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; + no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1; + turbo_fp = div_fp(no_turbo, total); + turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100))); + + mutex_unlock(&intel_pstate_driver_lock); + + return sprintf(buf, "%u\n", turbo_pct); +} + +static ssize_t show_num_pstates(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + struct cpudata *cpu; + int total; + + mutex_lock(&intel_pstate_driver_lock); + + if (!intel_pstate_driver) { + mutex_unlock(&intel_pstate_driver_lock); + return -EAGAIN; + } + + cpu = all_cpu_data[0]; + total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; + + mutex_unlock(&intel_pstate_driver_lock); + + return sprintf(buf, "%u\n", total); +} + +static ssize_t show_no_turbo(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + ssize_t ret; + + mutex_lock(&intel_pstate_driver_lock); + + if (!intel_pstate_driver) { + mutex_unlock(&intel_pstate_driver_lock); + return -EAGAIN; + } + + update_turbo_state(); + if (global.turbo_disabled) + ret = sprintf(buf, "%u\n", global.turbo_disabled); + else + ret = sprintf(buf, "%u\n", global.no_turbo); + + mutex_unlock(&intel_pstate_driver_lock); + + return ret; +} + +static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + mutex_lock(&intel_pstate_driver_lock); + + if (!intel_pstate_driver) { + mutex_unlock(&intel_pstate_driver_lock); + return -EAGAIN; + } + + mutex_lock(&intel_pstate_limits_lock); + + update_turbo_state(); + if (global.turbo_disabled) { + pr_notice_once("Turbo disabled by BIOS or unavailable on processor\n"); + mutex_unlock(&intel_pstate_limits_lock); + mutex_unlock(&intel_pstate_driver_lock); + return -EPERM; + } + + global.no_turbo = clamp_t(int, input, 0, 1); + + if (global.no_turbo) { + struct cpudata *cpu = all_cpu_data[0]; + int pct = cpu->pstate.max_pstate * 100 / cpu->pstate.turbo_pstate; + + /* Squash the global minimum into the permitted range. */ + if (global.min_perf_pct > pct) + global.min_perf_pct = pct; + } + + mutex_unlock(&intel_pstate_limits_lock); + + intel_pstate_update_policies(); + arch_set_max_freq_ratio(global.no_turbo); + + mutex_unlock(&intel_pstate_driver_lock); + + return count; +} + +static void update_qos_request(enum freq_qos_req_type type) +{ + struct freq_qos_request *req; + struct cpufreq_policy *policy; + int i; + + for_each_possible_cpu(i) { + struct cpudata *cpu = all_cpu_data[i]; + unsigned int freq, perf_pct; + + policy = cpufreq_cpu_get(i); + if (!policy) + continue; + + req = policy->driver_data; + cpufreq_cpu_put(policy); + + if (!req) + continue; + + if (hwp_active) + intel_pstate_get_hwp_cap(cpu); + + if (type == FREQ_QOS_MIN) { + perf_pct = global.min_perf_pct; + } else { + req++; + perf_pct = global.max_perf_pct; + } + + freq = DIV_ROUND_UP(cpu->pstate.turbo_freq * perf_pct, 100); + + if (freq_qos_update_request(req, freq) < 0) + pr_warn("Failed to update freq constraint: CPU%d\n", i); + } +} + +static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + mutex_lock(&intel_pstate_driver_lock); + + if (!intel_pstate_driver) { + mutex_unlock(&intel_pstate_driver_lock); + return -EAGAIN; + } + + mutex_lock(&intel_pstate_limits_lock); + + global.max_perf_pct = clamp_t(int, input, global.min_perf_pct, 100); + + mutex_unlock(&intel_pstate_limits_lock); + + if (intel_pstate_driver == &intel_pstate) + intel_pstate_update_policies(); + else + update_qos_request(FREQ_QOS_MAX); + + mutex_unlock(&intel_pstate_driver_lock); + + return count; +} + +static ssize_t store_min_perf_pct(struct kobject *a, struct kobj_attribute *b, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + mutex_lock(&intel_pstate_driver_lock); + + if (!intel_pstate_driver) { + mutex_unlock(&intel_pstate_driver_lock); + return -EAGAIN; + } + + mutex_lock(&intel_pstate_limits_lock); + + global.min_perf_pct = clamp_t(int, input, + min_perf_pct_min(), global.max_perf_pct); + + mutex_unlock(&intel_pstate_limits_lock); + + if (intel_pstate_driver == &intel_pstate) + intel_pstate_update_policies(); + else + update_qos_request(FREQ_QOS_MIN); + + mutex_unlock(&intel_pstate_driver_lock); + + return count; +} + +static ssize_t show_hwp_dynamic_boost(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%u\n", hwp_boost); +} + +static ssize_t store_hwp_dynamic_boost(struct kobject *a, + struct kobj_attribute *b, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = kstrtouint(buf, 10, &input); + if (ret) + return ret; + + mutex_lock(&intel_pstate_driver_lock); + hwp_boost = !!input; + intel_pstate_update_policies(); + mutex_unlock(&intel_pstate_driver_lock); + + return count; +} + +static ssize_t show_energy_efficiency(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + u64 power_ctl; + int enable; + + rdmsrl(MSR_IA32_POWER_CTL, power_ctl); + enable = !!(power_ctl & BIT(MSR_IA32_POWER_CTL_BIT_EE)); + return sprintf(buf, "%d\n", !enable); +} + +static ssize_t store_energy_efficiency(struct kobject *a, struct kobj_attribute *b, + const char *buf, size_t count) +{ + bool input; + int ret; + + ret = kstrtobool(buf, &input); + if (ret) + return ret; + + set_power_ctl_ee_state(input); + + return count; +} + +show_one(max_perf_pct, max_perf_pct); +show_one(min_perf_pct, min_perf_pct); + +define_one_global_rw(status); +define_one_global_rw(no_turbo); +define_one_global_rw(max_perf_pct); +define_one_global_rw(min_perf_pct); +define_one_global_ro(turbo_pct); +define_one_global_ro(num_pstates); +define_one_global_rw(hwp_dynamic_boost); +define_one_global_rw(energy_efficiency); + +static struct attribute *intel_pstate_attributes[] = { + &status.attr, + &no_turbo.attr, + NULL +}; + +static const struct attribute_group intel_pstate_attr_group = { + .attrs = intel_pstate_attributes, +}; + +static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[]; + +static struct kobject *intel_pstate_kobject; + +static void __init intel_pstate_sysfs_expose_params(void) +{ + int rc; + + intel_pstate_kobject = kobject_create_and_add("intel_pstate", + &cpu_subsys.dev_root->kobj); + if (WARN_ON(!intel_pstate_kobject)) + return; + + rc = sysfs_create_group(intel_pstate_kobject, &intel_pstate_attr_group); + if (WARN_ON(rc)) + return; + + if (!boot_cpu_has(X86_FEATURE_HYBRID_CPU)) { + rc = sysfs_create_file(intel_pstate_kobject, &turbo_pct.attr); + WARN_ON(rc); + + rc = sysfs_create_file(intel_pstate_kobject, &num_pstates.attr); + WARN_ON(rc); + } + + /* + * If per cpu limits are enforced there are no global limits, so + * return without creating max/min_perf_pct attributes + */ + if (per_cpu_limits) + return; + + rc = sysfs_create_file(intel_pstate_kobject, &max_perf_pct.attr); + WARN_ON(rc); + + rc = sysfs_create_file(intel_pstate_kobject, &min_perf_pct.attr); + WARN_ON(rc); + + if (x86_match_cpu(intel_pstate_cpu_ee_disable_ids)) { + rc = sysfs_create_file(intel_pstate_kobject, &energy_efficiency.attr); + WARN_ON(rc); + } +} + +static void __init intel_pstate_sysfs_remove(void) +{ + if (!intel_pstate_kobject) + return; + + sysfs_remove_group(intel_pstate_kobject, &intel_pstate_attr_group); + + if (!boot_cpu_has(X86_FEATURE_HYBRID_CPU)) { + sysfs_remove_file(intel_pstate_kobject, &num_pstates.attr); + sysfs_remove_file(intel_pstate_kobject, &turbo_pct.attr); + } + + if (!per_cpu_limits) { + sysfs_remove_file(intel_pstate_kobject, &max_perf_pct.attr); + sysfs_remove_file(intel_pstate_kobject, &min_perf_pct.attr); + + if (x86_match_cpu(intel_pstate_cpu_ee_disable_ids)) + sysfs_remove_file(intel_pstate_kobject, &energy_efficiency.attr); + } + + kobject_put(intel_pstate_kobject); +} + +static void intel_pstate_sysfs_expose_hwp_dynamic_boost(void) +{ + int rc; + + if (!hwp_active) + return; + + rc = sysfs_create_file(intel_pstate_kobject, &hwp_dynamic_boost.attr); + WARN_ON_ONCE(rc); +} + +static void intel_pstate_sysfs_hide_hwp_dynamic_boost(void) +{ + if (!hwp_active) + return; + + sysfs_remove_file(intel_pstate_kobject, &hwp_dynamic_boost.attr); +} + +/************************** sysfs end ************************/ + +static void intel_pstate_notify_work(struct work_struct *work) +{ + struct cpudata *cpudata = + container_of(to_delayed_work(work), struct cpudata, hwp_notify_work); + struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpudata->cpu); + + if (policy) { + intel_pstate_get_hwp_cap(cpudata); + __intel_pstate_update_max_freq(cpudata, policy); + + cpufreq_cpu_release(policy); + } + + wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_STATUS, 0); +} + +static DEFINE_SPINLOCK(hwp_notify_lock); +static cpumask_t hwp_intr_enable_mask; + +void notify_hwp_interrupt(void) +{ + unsigned int this_cpu = smp_processor_id(); + struct cpudata *cpudata; + unsigned long flags; + u64 value; + + if (!READ_ONCE(hwp_active) || !boot_cpu_has(X86_FEATURE_HWP_NOTIFY)) + return; + + rdmsrl_safe(MSR_HWP_STATUS, &value); + if (!(value & 0x01)) + return; + + spin_lock_irqsave(&hwp_notify_lock, flags); + + if (!cpumask_test_cpu(this_cpu, &hwp_intr_enable_mask)) + goto ack_intr; + + /* + * Currently we never free all_cpu_data. And we can't reach here + * without this allocated. But for safety for future changes, added + * check. + */ + if (unlikely(!READ_ONCE(all_cpu_data))) + goto ack_intr; + + /* + * The free is done during cleanup, when cpufreq registry is failed. + * We wouldn't be here if it fails on init or switch status. But for + * future changes, added check. + */ + cpudata = READ_ONCE(all_cpu_data[this_cpu]); + if (unlikely(!cpudata)) + goto ack_intr; + + schedule_delayed_work(&cpudata->hwp_notify_work, msecs_to_jiffies(10)); + + spin_unlock_irqrestore(&hwp_notify_lock, flags); + + return; + +ack_intr: + wrmsrl_safe(MSR_HWP_STATUS, 0); + spin_unlock_irqrestore(&hwp_notify_lock, flags); +} + +static void intel_pstate_disable_hwp_interrupt(struct cpudata *cpudata) +{ + unsigned long flags; + + if (!boot_cpu_has(X86_FEATURE_HWP_NOTIFY)) + return; + + /* wrmsrl_on_cpu has to be outside spinlock as this can result in IPC */ + wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00); + + spin_lock_irqsave(&hwp_notify_lock, flags); + if (cpumask_test_and_clear_cpu(cpudata->cpu, &hwp_intr_enable_mask)) + cancel_delayed_work(&cpudata->hwp_notify_work); + spin_unlock_irqrestore(&hwp_notify_lock, flags); +} + +static void intel_pstate_enable_hwp_interrupt(struct cpudata *cpudata) +{ + /* Enable HWP notification interrupt for guaranteed performance change */ + if (boot_cpu_has(X86_FEATURE_HWP_NOTIFY)) { + unsigned long flags; + + spin_lock_irqsave(&hwp_notify_lock, flags); + INIT_DELAYED_WORK(&cpudata->hwp_notify_work, intel_pstate_notify_work); + cpumask_set_cpu(cpudata->cpu, &hwp_intr_enable_mask); + spin_unlock_irqrestore(&hwp_notify_lock, flags); + + /* wrmsrl_on_cpu has to be outside spinlock as this can result in IPC */ + wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x01); + wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_STATUS, 0); + } +} + +static void intel_pstate_update_epp_defaults(struct cpudata *cpudata) +{ + cpudata->epp_default = intel_pstate_get_epp(cpudata, 0); + + /* + * If this CPU gen doesn't call for change in balance_perf + * EPP return. + */ + if (epp_values[EPP_INDEX_BALANCE_PERFORMANCE] == HWP_EPP_BALANCE_PERFORMANCE) + return; + + /* + * If powerup EPP is something other than chipset default 0x80 and + * - is more performance oriented than 0x80 (default balance_perf EPP) + * - But less performance oriented than performance EPP + * then use this as new balance_perf EPP. + */ + if (cpudata->epp_default < HWP_EPP_BALANCE_PERFORMANCE && + cpudata->epp_default > HWP_EPP_PERFORMANCE) { + epp_values[EPP_INDEX_BALANCE_PERFORMANCE] = cpudata->epp_default; + return; + } + + /* + * Use hard coded value per gen to update the balance_perf + * and default EPP. + */ + cpudata->epp_default = epp_values[EPP_INDEX_BALANCE_PERFORMANCE]; + intel_pstate_set_epp(cpudata, cpudata->epp_default); +} + +static void intel_pstate_hwp_enable(struct cpudata *cpudata) +{ + /* First disable HWP notification interrupt till we activate again */ + if (boot_cpu_has(X86_FEATURE_HWP_NOTIFY)) + wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00); + + wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1); + + intel_pstate_enable_hwp_interrupt(cpudata); + + if (cpudata->epp_default >= 0) + return; + + intel_pstate_update_epp_defaults(cpudata); +} + +static int atom_get_min_pstate(int not_used) +{ + u64 value; + + rdmsrl(MSR_ATOM_CORE_RATIOS, value); + return (value >> 8) & 0x7F; +} + +static int atom_get_max_pstate(int not_used) +{ + u64 value; + + rdmsrl(MSR_ATOM_CORE_RATIOS, value); + return (value >> 16) & 0x7F; +} + +static int atom_get_turbo_pstate(int not_used) +{ + u64 value; + + rdmsrl(MSR_ATOM_CORE_TURBO_RATIOS, value); + return value & 0x7F; +} + +static u64 atom_get_val(struct cpudata *cpudata, int pstate) +{ + u64 val; + int32_t vid_fp; + u32 vid; + + val = (u64)pstate << 8; + if (global.no_turbo && !global.turbo_disabled) + val |= (u64)1 << 32; + + vid_fp = cpudata->vid.min + mul_fp( + int_tofp(pstate - cpudata->pstate.min_pstate), + cpudata->vid.ratio); + + vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max); + vid = ceiling_fp(vid_fp); + + if (pstate > cpudata->pstate.max_pstate) + vid = cpudata->vid.turbo; + + return val | vid; +} + +static int silvermont_get_scaling(void) +{ + u64 value; + int i; + /* Defined in Table 35-6 from SDM (Sept 2015) */ + static int silvermont_freq_table[] = { + 83300, 100000, 133300, 116700, 80000}; + + rdmsrl(MSR_FSB_FREQ, value); + i = value & 0x7; + WARN_ON(i > 4); + + return silvermont_freq_table[i]; +} + +static int airmont_get_scaling(void) +{ + u64 value; + int i; + /* Defined in Table 35-10 from SDM (Sept 2015) */ + static int airmont_freq_table[] = { + 83300, 100000, 133300, 116700, 80000, + 93300, 90000, 88900, 87500}; + + rdmsrl(MSR_FSB_FREQ, value); + i = value & 0xF; + WARN_ON(i > 8); + + return airmont_freq_table[i]; +} + +static void atom_get_vid(struct cpudata *cpudata) +{ + u64 value; + + rdmsrl(MSR_ATOM_CORE_VIDS, value); + cpudata->vid.min = int_tofp((value >> 8) & 0x7f); + cpudata->vid.max = int_tofp((value >> 16) & 0x7f); + cpudata->vid.ratio = div_fp( + cpudata->vid.max - cpudata->vid.min, + int_tofp(cpudata->pstate.max_pstate - + cpudata->pstate.min_pstate)); + + rdmsrl(MSR_ATOM_CORE_TURBO_VIDS, value); + cpudata->vid.turbo = value & 0x7f; +} + +static int core_get_min_pstate(int cpu) +{ + u64 value; + + rdmsrl_on_cpu(cpu, MSR_PLATFORM_INFO, &value); + return (value >> 40) & 0xFF; +} + +static int core_get_max_pstate_physical(int cpu) +{ + u64 value; + + rdmsrl_on_cpu(cpu, MSR_PLATFORM_INFO, &value); + return (value >> 8) & 0xFF; +} + +static int core_get_tdp_ratio(int cpu, u64 plat_info) +{ + /* Check how many TDP levels present */ + if (plat_info & 0x600000000) { + u64 tdp_ctrl; + u64 tdp_ratio; + int tdp_msr; + int err; + + /* Get the TDP level (0, 1, 2) to get ratios */ + err = rdmsrl_safe_on_cpu(cpu, MSR_CONFIG_TDP_CONTROL, &tdp_ctrl); + if (err) + return err; + + /* TDP MSR are continuous starting at 0x648 */ + tdp_msr = MSR_CONFIG_TDP_NOMINAL + (tdp_ctrl & 0x03); + err = rdmsrl_safe_on_cpu(cpu, tdp_msr, &tdp_ratio); + if (err) + return err; + + /* For level 1 and 2, bits[23:16] contain the ratio */ + if (tdp_ctrl & 0x03) + tdp_ratio >>= 16; + + tdp_ratio &= 0xff; /* ratios are only 8 bits long */ + pr_debug("tdp_ratio %x\n", (int)tdp_ratio); + + return (int)tdp_ratio; + } + + return -ENXIO; +} + +static int core_get_max_pstate(int cpu) +{ + u64 tar; + u64 plat_info; + int max_pstate; + int tdp_ratio; + int err; + + rdmsrl_on_cpu(cpu, MSR_PLATFORM_INFO, &plat_info); + max_pstate = (plat_info >> 8) & 0xFF; + + tdp_ratio = core_get_tdp_ratio(cpu, plat_info); + if (tdp_ratio <= 0) + return max_pstate; + + if (hwp_active) { + /* Turbo activation ratio is not used on HWP platforms */ + return tdp_ratio; + } + + err = rdmsrl_safe_on_cpu(cpu, MSR_TURBO_ACTIVATION_RATIO, &tar); + if (!err) { + int tar_levels; + + /* Do some sanity checking for safety */ + tar_levels = tar & 0xff; + if (tdp_ratio - 1 == tar_levels) { + max_pstate = tar_levels; + pr_debug("max_pstate=TAC %x\n", max_pstate); + } + } + + return max_pstate; +} + +static int core_get_turbo_pstate(int cpu) +{ + u64 value; + int nont, ret; + + rdmsrl_on_cpu(cpu, MSR_TURBO_RATIO_LIMIT, &value); + nont = core_get_max_pstate(cpu); + ret = (value) & 255; + if (ret <= nont) + ret = nont; + return ret; +} + +static inline int core_get_scaling(void) +{ + return 100000; +} + +static u64 core_get_val(struct cpudata *cpudata, int pstate) +{ + u64 val; + + val = (u64)pstate << 8; + if (global.no_turbo && !global.turbo_disabled) + val |= (u64)1 << 32; + + return val; +} + +static int knl_get_aperf_mperf_shift(void) +{ + return 10; +} + +static int knl_get_turbo_pstate(int cpu) +{ + u64 value; + int nont, ret; + + rdmsrl_on_cpu(cpu, MSR_TURBO_RATIO_LIMIT, &value); + nont = core_get_max_pstate(cpu); + ret = (((value) >> 8) & 0xFF); + if (ret <= nont) + ret = nont; + return ret; +} + +static void hybrid_get_type(void *data) +{ + u8 *cpu_type = data; + + *cpu_type = get_this_hybrid_cpu_type(); +} + +static int hybrid_get_cpu_scaling(int cpu) +{ + u8 cpu_type = 0; + + smp_call_function_single(cpu, hybrid_get_type, &cpu_type, 1); + /* P-cores have a smaller perf level-to-freqency scaling factor. */ + if (cpu_type == 0x40) + return 78741; + + return core_get_scaling(); +} + +static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) +{ + trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu); + cpu->pstate.current_pstate = pstate; + /* + * Generally, there is no guarantee that this code will always run on + * the CPU being updated, so force the register update to run on the + * right CPU. + */ + wrmsrl_on_cpu(cpu->cpu, MSR_IA32_PERF_CTL, + pstate_funcs.get_val(cpu, pstate)); +} + +static void intel_pstate_set_min_pstate(struct cpudata *cpu) +{ + intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate); +} + +static void intel_pstate_max_within_limits(struct cpudata *cpu) +{ + int pstate = max(cpu->pstate.min_pstate, cpu->max_perf_ratio); + + update_turbo_state(); + intel_pstate_set_pstate(cpu, pstate); +} + +static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) +{ + int perf_ctl_max_phys = pstate_funcs.get_max_physical(cpu->cpu); + int perf_ctl_scaling = pstate_funcs.get_scaling(); + + cpu->pstate.min_pstate = pstate_funcs.get_min(cpu->cpu); + cpu->pstate.max_pstate_physical = perf_ctl_max_phys; + cpu->pstate.perf_ctl_scaling = perf_ctl_scaling; + + if (hwp_active && !hwp_mode_bdw) { + __intel_pstate_get_hwp_cap(cpu); + + if (pstate_funcs.get_cpu_scaling) { + cpu->pstate.scaling = pstate_funcs.get_cpu_scaling(cpu->cpu); + if (cpu->pstate.scaling != perf_ctl_scaling) + intel_pstate_hybrid_hwp_adjust(cpu); + } else { + cpu->pstate.scaling = perf_ctl_scaling; + } + } else { + cpu->pstate.scaling = perf_ctl_scaling; + cpu->pstate.max_pstate = pstate_funcs.get_max(cpu->cpu); + cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(cpu->cpu); + } + + if (cpu->pstate.scaling == perf_ctl_scaling) { + cpu->pstate.min_freq = cpu->pstate.min_pstate * perf_ctl_scaling; + cpu->pstate.max_freq = cpu->pstate.max_pstate * perf_ctl_scaling; + cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * perf_ctl_scaling; + } + + if (pstate_funcs.get_aperf_mperf_shift) + cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift(); + + if (pstate_funcs.get_vid) + pstate_funcs.get_vid(cpu); + + intel_pstate_set_min_pstate(cpu); +} + +/* + * Long hold time will keep high perf limits for long time, + * which negatively impacts perf/watt for some workloads, + * like specpower. 3ms is based on experiements on some + * workoads. + */ +static int hwp_boost_hold_time_ns = 3 * NSEC_PER_MSEC; + +static inline void intel_pstate_hwp_boost_up(struct cpudata *cpu) +{ + u64 hwp_req = READ_ONCE(cpu->hwp_req_cached); + u64 hwp_cap = READ_ONCE(cpu->hwp_cap_cached); + u32 max_limit = (hwp_req & 0xff00) >> 8; + u32 min_limit = (hwp_req & 0xff); + u32 boost_level1; + + /* + * Cases to consider (User changes via sysfs or boot time): + * If, P0 (Turbo max) = P1 (Guaranteed max) = min: + * No boost, return. + * If, P0 (Turbo max) > P1 (Guaranteed max) = min: + * Should result in one level boost only for P0. + * If, P0 (Turbo max) = P1 (Guaranteed max) > min: + * Should result in two level boost: + * (min + p1)/2 and P1. + * If, P0 (Turbo max) > P1 (Guaranteed max) > min: + * Should result in three level boost: + * (min + p1)/2, P1 and P0. + */ + + /* If max and min are equal or already at max, nothing to boost */ + if (max_limit == min_limit || cpu->hwp_boost_min >= max_limit) + return; + + if (!cpu->hwp_boost_min) + cpu->hwp_boost_min = min_limit; + + /* level at half way mark between min and guranteed */ + boost_level1 = (HWP_GUARANTEED_PERF(hwp_cap) + min_limit) >> 1; + + if (cpu->hwp_boost_min < boost_level1) + cpu->hwp_boost_min = boost_level1; + else if (cpu->hwp_boost_min < HWP_GUARANTEED_PERF(hwp_cap)) + cpu->hwp_boost_min = HWP_GUARANTEED_PERF(hwp_cap); + else if (cpu->hwp_boost_min == HWP_GUARANTEED_PERF(hwp_cap) && + max_limit != HWP_GUARANTEED_PERF(hwp_cap)) + cpu->hwp_boost_min = max_limit; + else + return; + + hwp_req = (hwp_req & ~GENMASK_ULL(7, 0)) | cpu->hwp_boost_min; + wrmsrl(MSR_HWP_REQUEST, hwp_req); + cpu->last_update = cpu->sample.time; +} + +static inline void intel_pstate_hwp_boost_down(struct cpudata *cpu) +{ + if (cpu->hwp_boost_min) { + bool expired; + + /* Check if we are idle for hold time to boost down */ + expired = time_after64(cpu->sample.time, cpu->last_update + + hwp_boost_hold_time_ns); + if (expired) { + wrmsrl(MSR_HWP_REQUEST, cpu->hwp_req_cached); + cpu->hwp_boost_min = 0; + } + } + cpu->last_update = cpu->sample.time; +} + +static inline void intel_pstate_update_util_hwp_local(struct cpudata *cpu, + u64 time) +{ + cpu->sample.time = time; + + if (cpu->sched_flags & SCHED_CPUFREQ_IOWAIT) { + bool do_io = false; + + cpu->sched_flags = 0; + /* + * Set iowait_boost flag and update time. Since IO WAIT flag + * is set all the time, we can't just conclude that there is + * some IO bound activity is scheduled on this CPU with just + * one occurrence. If we receive at least two in two + * consecutive ticks, then we treat as boost candidate. + */ + if (time_before64(time, cpu->last_io_update + 2 * TICK_NSEC)) + do_io = true; + + cpu->last_io_update = time; + + if (do_io) + intel_pstate_hwp_boost_up(cpu); + + } else { + intel_pstate_hwp_boost_down(cpu); + } +} + +static inline void intel_pstate_update_util_hwp(struct update_util_data *data, + u64 time, unsigned int flags) +{ + struct cpudata *cpu = container_of(data, struct cpudata, update_util); + + cpu->sched_flags |= flags; + + if (smp_processor_id() == cpu->cpu) + intel_pstate_update_util_hwp_local(cpu, time); +} + +static inline void intel_pstate_calc_avg_perf(struct cpudata *cpu) +{ + struct sample *sample = &cpu->sample; + + sample->core_avg_perf = div_ext_fp(sample->aperf, sample->mperf); +} + +static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time) +{ + u64 aperf, mperf; + unsigned long flags; + u64 tsc; + + local_irq_save(flags); + rdmsrl(MSR_IA32_APERF, aperf); + rdmsrl(MSR_IA32_MPERF, mperf); + tsc = rdtsc(); + if (cpu->prev_mperf == mperf || cpu->prev_tsc == tsc) { + local_irq_restore(flags); + return false; + } + local_irq_restore(flags); + + cpu->last_sample_time = cpu->sample.time; + cpu->sample.time = time; + cpu->sample.aperf = aperf; + cpu->sample.mperf = mperf; + cpu->sample.tsc = tsc; + cpu->sample.aperf -= cpu->prev_aperf; + cpu->sample.mperf -= cpu->prev_mperf; + cpu->sample.tsc -= cpu->prev_tsc; + + cpu->prev_aperf = aperf; + cpu->prev_mperf = mperf; + cpu->prev_tsc = tsc; + /* + * First time this function is invoked in a given cycle, all of the + * previous sample data fields are equal to zero or stale and they must + * be populated with meaningful numbers for things to work, so assume + * that sample.time will always be reset before setting the utilization + * update hook and make the caller skip the sample then. + */ + if (cpu->last_sample_time) { + intel_pstate_calc_avg_perf(cpu); + return true; + } + return false; +} + +static inline int32_t get_avg_frequency(struct cpudata *cpu) +{ + return mul_ext_fp(cpu->sample.core_avg_perf, cpu_khz); +} + +static inline int32_t get_avg_pstate(struct cpudata *cpu) +{ + return mul_ext_fp(cpu->pstate.max_pstate_physical, + cpu->sample.core_avg_perf); +} + +static inline int32_t get_target_pstate(struct cpudata *cpu) +{ + struct sample *sample = &cpu->sample; + int32_t busy_frac; + int target, avg_pstate; + + busy_frac = div_fp(sample->mperf << cpu->aperf_mperf_shift, + sample->tsc); + + if (busy_frac < cpu->iowait_boost) + busy_frac = cpu->iowait_boost; + + sample->busy_scaled = busy_frac * 100; + + target = global.no_turbo || global.turbo_disabled ? + cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; + target += target >> 2; + target = mul_fp(target, busy_frac); + if (target < cpu->pstate.min_pstate) + target = cpu->pstate.min_pstate; + + /* + * If the average P-state during the previous cycle was higher than the + * current target, add 50% of the difference to the target to reduce + * possible performance oscillations and offset possible performance + * loss related to moving the workload from one CPU to another within + * a package/module. + */ + avg_pstate = get_avg_pstate(cpu); + if (avg_pstate > target) + target += (avg_pstate - target) >> 1; + + return target; +} + +static int intel_pstate_prepare_request(struct cpudata *cpu, int pstate) +{ + int min_pstate = max(cpu->pstate.min_pstate, cpu->min_perf_ratio); + int max_pstate = max(min_pstate, cpu->max_perf_ratio); + + return clamp_t(int, pstate, min_pstate, max_pstate); +} + +static void intel_pstate_update_pstate(struct cpudata *cpu, int pstate) +{ + if (pstate == cpu->pstate.current_pstate) + return; + + cpu->pstate.current_pstate = pstate; + wrmsrl(MSR_IA32_PERF_CTL, pstate_funcs.get_val(cpu, pstate)); +} + +static void intel_pstate_adjust_pstate(struct cpudata *cpu) +{ + int from = cpu->pstate.current_pstate; + struct sample *sample; + int target_pstate; + + update_turbo_state(); + + target_pstate = get_target_pstate(cpu); + target_pstate = intel_pstate_prepare_request(cpu, target_pstate); + trace_cpu_frequency(target_pstate * cpu->pstate.scaling, cpu->cpu); + intel_pstate_update_pstate(cpu, target_pstate); + + sample = &cpu->sample; + trace_pstate_sample(mul_ext_fp(100, sample->core_avg_perf), + fp_toint(sample->busy_scaled), + from, + cpu->pstate.current_pstate, + sample->mperf, + sample->aperf, + sample->tsc, + get_avg_frequency(cpu), + fp_toint(cpu->iowait_boost * 100)); +} + +static void intel_pstate_update_util(struct update_util_data *data, u64 time, + unsigned int flags) +{ + struct cpudata *cpu = container_of(data, struct cpudata, update_util); + u64 delta_ns; + + /* Don't allow remote callbacks */ + if (smp_processor_id() != cpu->cpu) + return; + + delta_ns = time - cpu->last_update; + if (flags & SCHED_CPUFREQ_IOWAIT) { + /* Start over if the CPU may have been idle. */ + if (delta_ns > TICK_NSEC) { + cpu->iowait_boost = ONE_EIGHTH_FP; + } else if (cpu->iowait_boost >= ONE_EIGHTH_FP) { + cpu->iowait_boost <<= 1; + if (cpu->iowait_boost > int_tofp(1)) + cpu->iowait_boost = int_tofp(1); + } else { + cpu->iowait_boost = ONE_EIGHTH_FP; + } + } else if (cpu->iowait_boost) { + /* Clear iowait_boost if the CPU may have been idle. */ + if (delta_ns > TICK_NSEC) + cpu->iowait_boost = 0; + else + cpu->iowait_boost >>= 1; + } + cpu->last_update = time; + delta_ns = time - cpu->sample.time; + if ((s64)delta_ns < INTEL_PSTATE_SAMPLING_INTERVAL) + return; + + if (intel_pstate_sample(cpu, time)) + intel_pstate_adjust_pstate(cpu); +} + +static struct pstate_funcs core_funcs = { + .get_max = core_get_max_pstate, + .get_max_physical = core_get_max_pstate_physical, + .get_min = core_get_min_pstate, + .get_turbo = core_get_turbo_pstate, + .get_scaling = core_get_scaling, + .get_val = core_get_val, +}; + +static const struct pstate_funcs silvermont_funcs = { + .get_max = atom_get_max_pstate, + .get_max_physical = atom_get_max_pstate, + .get_min = atom_get_min_pstate, + .get_turbo = atom_get_turbo_pstate, + .get_val = atom_get_val, + .get_scaling = silvermont_get_scaling, + .get_vid = atom_get_vid, +}; + +static const struct pstate_funcs airmont_funcs = { + .get_max = atom_get_max_pstate, + .get_max_physical = atom_get_max_pstate, + .get_min = atom_get_min_pstate, + .get_turbo = atom_get_turbo_pstate, + .get_val = atom_get_val, + .get_scaling = airmont_get_scaling, + .get_vid = atom_get_vid, +}; + +static const struct pstate_funcs knl_funcs = { + .get_max = core_get_max_pstate, + .get_max_physical = core_get_max_pstate_physical, + .get_min = core_get_min_pstate, + .get_turbo = knl_get_turbo_pstate, + .get_aperf_mperf_shift = knl_get_aperf_mperf_shift, + .get_scaling = core_get_scaling, + .get_val = core_get_val, +}; + +#define X86_MATCH(model, policy) \ + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, INTEL_FAM6_##model, \ + X86_FEATURE_APERFMPERF, &policy) + +static const struct x86_cpu_id intel_pstate_cpu_ids[] = { + X86_MATCH(SANDYBRIDGE, core_funcs), + X86_MATCH(SANDYBRIDGE_X, core_funcs), + X86_MATCH(ATOM_SILVERMONT, silvermont_funcs), + X86_MATCH(IVYBRIDGE, core_funcs), + X86_MATCH(HASWELL, core_funcs), + X86_MATCH(BROADWELL, core_funcs), + X86_MATCH(IVYBRIDGE_X, core_funcs), + X86_MATCH(HASWELL_X, core_funcs), + X86_MATCH(HASWELL_L, core_funcs), + X86_MATCH(HASWELL_G, core_funcs), + X86_MATCH(BROADWELL_G, core_funcs), + X86_MATCH(ATOM_AIRMONT, airmont_funcs), + X86_MATCH(SKYLAKE_L, core_funcs), + X86_MATCH(BROADWELL_X, core_funcs), + X86_MATCH(SKYLAKE, core_funcs), + X86_MATCH(BROADWELL_D, core_funcs), + X86_MATCH(XEON_PHI_KNL, knl_funcs), + X86_MATCH(XEON_PHI_KNM, knl_funcs), + X86_MATCH(ATOM_GOLDMONT, core_funcs), + X86_MATCH(ATOM_GOLDMONT_PLUS, core_funcs), + X86_MATCH(SKYLAKE_X, core_funcs), + X86_MATCH(COMETLAKE, core_funcs), + X86_MATCH(ICELAKE_X, core_funcs), + X86_MATCH(TIGERLAKE, core_funcs), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); + +static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] __initconst = { + X86_MATCH(BROADWELL_D, core_funcs), + X86_MATCH(BROADWELL_X, core_funcs), + X86_MATCH(SKYLAKE_X, core_funcs), + X86_MATCH(ICELAKE_X, core_funcs), + X86_MATCH(SAPPHIRERAPIDS_X, core_funcs), + {} +}; + +static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[] = { + X86_MATCH(KABYLAKE, core_funcs), + {} +}; + +static const struct x86_cpu_id intel_pstate_hwp_boost_ids[] = { + X86_MATCH(SKYLAKE_X, core_funcs), + X86_MATCH(SKYLAKE, core_funcs), + {} +}; + +static int intel_pstate_init_cpu(unsigned int cpunum) +{ + struct cpudata *cpu; + + cpu = all_cpu_data[cpunum]; + + if (!cpu) { + cpu = kzalloc(sizeof(*cpu), GFP_KERNEL); + if (!cpu) + return -ENOMEM; + + WRITE_ONCE(all_cpu_data[cpunum], cpu); + + cpu->cpu = cpunum; + + cpu->epp_default = -EINVAL; + + if (hwp_active) { + const struct x86_cpu_id *id; + + intel_pstate_hwp_enable(cpu); + + id = x86_match_cpu(intel_pstate_hwp_boost_ids); + if (id && intel_pstate_acpi_pm_profile_server()) + hwp_boost = true; + } + } else if (hwp_active) { + /* + * Re-enable HWP in case this happens after a resume from ACPI + * S3 if the CPU was offline during the whole system/resume + * cycle. + */ + intel_pstate_hwp_reenable(cpu); + } + + cpu->epp_powersave = -EINVAL; + cpu->epp_policy = 0; + + intel_pstate_get_cpu_pstates(cpu); + + pr_debug("controlling: cpu %d\n", cpunum); + + return 0; +} + +static void intel_pstate_set_update_util_hook(unsigned int cpu_num) +{ + struct cpudata *cpu = all_cpu_data[cpu_num]; + + if (hwp_active && !hwp_boost) + return; + + if (cpu->update_util_set) + return; + + /* Prevent intel_pstate_update_util() from using stale data. */ + cpu->sample.time = 0; + cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, + (hwp_active ? + intel_pstate_update_util_hwp : + intel_pstate_update_util)); + cpu->update_util_set = true; +} + +static void intel_pstate_clear_update_util_hook(unsigned int cpu) +{ + struct cpudata *cpu_data = all_cpu_data[cpu]; + + if (!cpu_data->update_util_set) + return; + + cpufreq_remove_update_util_hook(cpu); + cpu_data->update_util_set = false; + synchronize_rcu(); +} + +static int intel_pstate_get_max_freq(struct cpudata *cpu) +{ + return global.turbo_disabled || global.no_turbo ? + cpu->pstate.max_freq : cpu->pstate.turbo_freq; +} + +static void intel_pstate_update_perf_limits(struct cpudata *cpu, + unsigned int policy_min, + unsigned int policy_max) +{ + int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling; + int32_t max_policy_perf, min_policy_perf; + + max_policy_perf = policy_max / perf_ctl_scaling; + if (policy_max == policy_min) { + min_policy_perf = max_policy_perf; + } else { + min_policy_perf = policy_min / perf_ctl_scaling; + min_policy_perf = clamp_t(int32_t, min_policy_perf, + 0, max_policy_perf); + } + + /* + * HWP needs some special consideration, because HWP_REQUEST uses + * abstract values to represent performance rather than pure ratios. + */ + if (hwp_active && cpu->pstate.scaling != perf_ctl_scaling) { + int freq; + + freq = max_policy_perf * perf_ctl_scaling; + max_policy_perf = intel_pstate_freq_to_hwp(cpu, freq); + freq = min_policy_perf * perf_ctl_scaling; + min_policy_perf = intel_pstate_freq_to_hwp(cpu, freq); + } + + pr_debug("cpu:%d min_policy_perf:%d max_policy_perf:%d\n", + cpu->cpu, min_policy_perf, max_policy_perf); + + /* Normalize user input to [min_perf, max_perf] */ + if (per_cpu_limits) { + cpu->min_perf_ratio = min_policy_perf; + cpu->max_perf_ratio = max_policy_perf; + } else { + int turbo_max = cpu->pstate.turbo_pstate; + int32_t global_min, global_max; + + /* Global limits are in percent of the maximum turbo P-state. */ + global_max = DIV_ROUND_UP(turbo_max * global.max_perf_pct, 100); + global_min = DIV_ROUND_UP(turbo_max * global.min_perf_pct, 100); + global_min = clamp_t(int32_t, global_min, 0, global_max); + + pr_debug("cpu:%d global_min:%d global_max:%d\n", cpu->cpu, + global_min, global_max); + + cpu->min_perf_ratio = max(min_policy_perf, global_min); + cpu->min_perf_ratio = min(cpu->min_perf_ratio, max_policy_perf); + cpu->max_perf_ratio = min(max_policy_perf, global_max); + cpu->max_perf_ratio = max(min_policy_perf, cpu->max_perf_ratio); + + /* Make sure min_perf <= max_perf */ + cpu->min_perf_ratio = min(cpu->min_perf_ratio, + cpu->max_perf_ratio); + + } + pr_debug("cpu:%d max_perf_ratio:%d min_perf_ratio:%d\n", cpu->cpu, + cpu->max_perf_ratio, + cpu->min_perf_ratio); +} + +static int intel_pstate_set_policy(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + + if (!policy->cpuinfo.max_freq) + return -ENODEV; + + pr_debug("set_policy cpuinfo.max %u policy->max %u\n", + policy->cpuinfo.max_freq, policy->max); + + cpu = all_cpu_data[policy->cpu]; + cpu->policy = policy->policy; + + mutex_lock(&intel_pstate_limits_lock); + + intel_pstate_update_perf_limits(cpu, policy->min, policy->max); + + if (cpu->policy == CPUFREQ_POLICY_PERFORMANCE) { + /* + * NOHZ_FULL CPUs need this as the governor callback may not + * be invoked on them. + */ + intel_pstate_clear_update_util_hook(policy->cpu); + intel_pstate_max_within_limits(cpu); + } else { + intel_pstate_set_update_util_hook(policy->cpu); + } + + if (hwp_active) { + /* + * When hwp_boost was active before and dynamically it + * was turned off, in that case we need to clear the + * update util hook. + */ + if (!hwp_boost) + intel_pstate_clear_update_util_hook(policy->cpu); + intel_pstate_hwp_set(policy->cpu); + } + /* + * policy->cur is never updated with the intel_pstate driver, but it + * is used as a stale frequency value. So, keep it within limits. + */ + policy->cur = policy->min; + + mutex_unlock(&intel_pstate_limits_lock); + + return 0; +} + +static void intel_pstate_adjust_policy_max(struct cpudata *cpu, + struct cpufreq_policy_data *policy) +{ + if (!hwp_active && + cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate && + policy->max < policy->cpuinfo.max_freq && + policy->max > cpu->pstate.max_freq) { + pr_debug("policy->max > max non turbo frequency\n"); + policy->max = policy->cpuinfo.max_freq; + } +} + +static void intel_pstate_verify_cpu_policy(struct cpudata *cpu, + struct cpufreq_policy_data *policy) +{ + int max_freq; + + update_turbo_state(); + if (hwp_active) { + intel_pstate_get_hwp_cap(cpu); + max_freq = global.no_turbo || global.turbo_disabled ? + cpu->pstate.max_freq : cpu->pstate.turbo_freq; + } else { + max_freq = intel_pstate_get_max_freq(cpu); + } + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, max_freq); + + intel_pstate_adjust_policy_max(cpu, policy); +} + +static int intel_pstate_verify_policy(struct cpufreq_policy_data *policy) +{ + intel_pstate_verify_cpu_policy(all_cpu_data[policy->cpu], policy); + + return 0; +} + +static int intel_cpufreq_cpu_offline(struct cpufreq_policy *policy) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + + pr_debug("CPU %d going offline\n", cpu->cpu); + + if (cpu->suspended) + return 0; + + /* + * If the CPU is an SMT thread and it goes offline with the performance + * settings different from the minimum, it will prevent its sibling + * from getting to lower performance levels, so force the minimum + * performance on CPU offline to prevent that from happening. + */ + if (hwp_active) + intel_pstate_hwp_offline(cpu); + else + intel_pstate_set_min_pstate(cpu); + + intel_pstate_exit_perf_limits(policy); + + return 0; +} + +static int intel_pstate_cpu_online(struct cpufreq_policy *policy) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + + pr_debug("CPU %d going online\n", cpu->cpu); + + intel_pstate_init_acpi_perf_limits(policy); + + if (hwp_active) { + /* + * Re-enable HWP and clear the "suspended" flag to let "resume" + * know that it need not do that. + */ + intel_pstate_hwp_reenable(cpu); + cpu->suspended = false; + } + + return 0; +} + +static int intel_pstate_cpu_offline(struct cpufreq_policy *policy) +{ + intel_pstate_clear_update_util_hook(policy->cpu); + + return intel_cpufreq_cpu_offline(policy); +} + +static int intel_pstate_cpu_exit(struct cpufreq_policy *policy) +{ + pr_debug("CPU %d exiting\n", policy->cpu); + + policy->fast_switch_possible = false; + + return 0; +} + +static int __intel_pstate_cpu_init(struct cpufreq_policy *policy) +{ + struct cpudata *cpu; + int rc; + + rc = intel_pstate_init_cpu(policy->cpu); + if (rc) + return rc; + + cpu = all_cpu_data[policy->cpu]; + + cpu->max_perf_ratio = 0xFF; + cpu->min_perf_ratio = 0; + + /* cpuinfo and default policy values */ + policy->cpuinfo.min_freq = cpu->pstate.min_freq; + update_turbo_state(); + global.turbo_disabled_mf = global.turbo_disabled; + policy->cpuinfo.max_freq = global.turbo_disabled ? + cpu->pstate.max_freq : cpu->pstate.turbo_freq; + + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + + intel_pstate_init_acpi_perf_limits(policy); + + policy->fast_switch_possible = true; + + return 0; +} + +static int intel_pstate_cpu_init(struct cpufreq_policy *policy) +{ + int ret = __intel_pstate_cpu_init(policy); + + if (ret) + return ret; + + /* + * Set the policy to powersave to provide a valid fallback value in case + * the default cpufreq governor is neither powersave nor performance. + */ + policy->policy = CPUFREQ_POLICY_POWERSAVE; + + if (hwp_active) { + struct cpudata *cpu = all_cpu_data[policy->cpu]; + + cpu->epp_cached = intel_pstate_get_epp(cpu, 0); + } + + return 0; +} + +static struct cpufreq_driver intel_pstate = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = intel_pstate_verify_policy, + .setpolicy = intel_pstate_set_policy, + .suspend = intel_pstate_suspend, + .resume = intel_pstate_resume, + .init = intel_pstate_cpu_init, + .exit = intel_pstate_cpu_exit, + .offline = intel_pstate_cpu_offline, + .online = intel_pstate_cpu_online, + .update_limits = intel_pstate_update_limits, + .name = "intel_pstate", +}; + +static int intel_cpufreq_verify_policy(struct cpufreq_policy_data *policy) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + + intel_pstate_verify_cpu_policy(cpu, policy); + intel_pstate_update_perf_limits(cpu, policy->min, policy->max); + + return 0; +} + +/* Use of trace in passive mode: + * + * In passive mode the trace core_busy field (also known as the + * performance field, and lablelled as such on the graphs; also known as + * core_avg_perf) is not needed and so is re-assigned to indicate if the + * driver call was via the normal or fast switch path. Various graphs + * output from the intel_pstate_tracer.py utility that include core_busy + * (or performance or core_avg_perf) have a fixed y-axis from 0 to 100%, + * so we use 10 to indicate the normal path through the driver, and + * 90 to indicate the fast switch path through the driver. + * The scaled_busy field is not used, and is set to 0. + */ + +#define INTEL_PSTATE_TRACE_TARGET 10 +#define INTEL_PSTATE_TRACE_FAST_SWITCH 90 + +static void intel_cpufreq_trace(struct cpudata *cpu, unsigned int trace_type, int old_pstate) +{ + struct sample *sample; + + if (!trace_pstate_sample_enabled()) + return; + + if (!intel_pstate_sample(cpu, ktime_get())) + return; + + sample = &cpu->sample; + trace_pstate_sample(trace_type, + 0, + old_pstate, + cpu->pstate.current_pstate, + sample->mperf, + sample->aperf, + sample->tsc, + get_avg_frequency(cpu), + fp_toint(cpu->iowait_boost * 100)); +} + +static void intel_cpufreq_hwp_update(struct cpudata *cpu, u32 min, u32 max, + u32 desired, bool fast_switch) +{ + u64 prev = READ_ONCE(cpu->hwp_req_cached), value = prev; + + value &= ~HWP_MIN_PERF(~0L); + value |= HWP_MIN_PERF(min); + + value &= ~HWP_MAX_PERF(~0L); + value |= HWP_MAX_PERF(max); + + value &= ~HWP_DESIRED_PERF(~0L); + value |= HWP_DESIRED_PERF(desired); + + if (value == prev) + return; + + WRITE_ONCE(cpu->hwp_req_cached, value); + if (fast_switch) + wrmsrl(MSR_HWP_REQUEST, value); + else + wrmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, value); +} + +static void intel_cpufreq_perf_ctl_update(struct cpudata *cpu, + u32 target_pstate, bool fast_switch) +{ + if (fast_switch) + wrmsrl(MSR_IA32_PERF_CTL, + pstate_funcs.get_val(cpu, target_pstate)); + else + wrmsrl_on_cpu(cpu->cpu, MSR_IA32_PERF_CTL, + pstate_funcs.get_val(cpu, target_pstate)); +} + +static int intel_cpufreq_update_pstate(struct cpufreq_policy *policy, + int target_pstate, bool fast_switch) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + int old_pstate = cpu->pstate.current_pstate; + + target_pstate = intel_pstate_prepare_request(cpu, target_pstate); + if (hwp_active) { + int max_pstate = policy->strict_target ? + target_pstate : cpu->max_perf_ratio; + + intel_cpufreq_hwp_update(cpu, target_pstate, max_pstate, 0, + fast_switch); + } else if (target_pstate != old_pstate) { + intel_cpufreq_perf_ctl_update(cpu, target_pstate, fast_switch); + } + + cpu->pstate.current_pstate = target_pstate; + + intel_cpufreq_trace(cpu, fast_switch ? INTEL_PSTATE_TRACE_FAST_SWITCH : + INTEL_PSTATE_TRACE_TARGET, old_pstate); + + return target_pstate; +} + +static int intel_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + struct cpufreq_freqs freqs; + int target_pstate; + + update_turbo_state(); + + freqs.old = policy->cur; + freqs.new = target_freq; + + cpufreq_freq_transition_begin(policy, &freqs); + + target_pstate = intel_pstate_freq_to_hwp_rel(cpu, freqs.new, relation); + target_pstate = intel_cpufreq_update_pstate(policy, target_pstate, false); + + freqs.new = target_pstate * cpu->pstate.scaling; + + cpufreq_freq_transition_end(policy, &freqs, false); + + return 0; +} + +static unsigned int intel_cpufreq_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct cpudata *cpu = all_cpu_data[policy->cpu]; + int target_pstate; + + update_turbo_state(); + + target_pstate = intel_pstate_freq_to_hwp(cpu, target_freq); + + target_pstate = intel_cpufreq_update_pstate(policy, target_pstate, true); + + return target_pstate * cpu->pstate.scaling; +} + +static void intel_cpufreq_adjust_perf(unsigned int cpunum, + unsigned long min_perf, + unsigned long target_perf, + unsigned long capacity) +{ + struct cpudata *cpu = all_cpu_data[cpunum]; + u64 hwp_cap = READ_ONCE(cpu->hwp_cap_cached); + int old_pstate = cpu->pstate.current_pstate; + int cap_pstate, min_pstate, max_pstate, target_pstate; + + update_turbo_state(); + cap_pstate = global.turbo_disabled ? HWP_GUARANTEED_PERF(hwp_cap) : + HWP_HIGHEST_PERF(hwp_cap); + + /* Optimization: Avoid unnecessary divisions. */ + + target_pstate = cap_pstate; + if (target_perf < capacity) + target_pstate = DIV_ROUND_UP(cap_pstate * target_perf, capacity); + + min_pstate = cap_pstate; + if (min_perf < capacity) + min_pstate = DIV_ROUND_UP(cap_pstate * min_perf, capacity); + + if (min_pstate < cpu->pstate.min_pstate) + min_pstate = cpu->pstate.min_pstate; + + if (min_pstate < cpu->min_perf_ratio) + min_pstate = cpu->min_perf_ratio; + + max_pstate = min(cap_pstate, cpu->max_perf_ratio); + if (max_pstate < min_pstate) + max_pstate = min_pstate; + + target_pstate = clamp_t(int, target_pstate, min_pstate, max_pstate); + + intel_cpufreq_hwp_update(cpu, min_pstate, max_pstate, target_pstate, true); + + cpu->pstate.current_pstate = target_pstate; + intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_FAST_SWITCH, old_pstate); +} + +static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct freq_qos_request *req; + struct cpudata *cpu; + struct device *dev; + int ret, freq; + + dev = get_cpu_device(policy->cpu); + if (!dev) + return -ENODEV; + + ret = __intel_pstate_cpu_init(policy); + if (ret) + return ret; + + policy->cpuinfo.transition_latency = INTEL_CPUFREQ_TRANSITION_LATENCY; + /* This reflects the intel_pstate_get_cpu_pstates() setting. */ + policy->cur = policy->cpuinfo.min_freq; + + req = kcalloc(2, sizeof(*req), GFP_KERNEL); + if (!req) { + ret = -ENOMEM; + goto pstate_exit; + } + + cpu = all_cpu_data[policy->cpu]; + + if (hwp_active) { + u64 value; + + policy->transition_delay_us = INTEL_CPUFREQ_TRANSITION_DELAY_HWP; + + intel_pstate_get_hwp_cap(cpu); + + rdmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, &value); + WRITE_ONCE(cpu->hwp_req_cached, value); + + cpu->epp_cached = intel_pstate_get_epp(cpu, value); + } else { + policy->transition_delay_us = INTEL_CPUFREQ_TRANSITION_DELAY; + } + + freq = DIV_ROUND_UP(cpu->pstate.turbo_freq * global.min_perf_pct, 100); + + ret = freq_qos_add_request(&policy->constraints, req, FREQ_QOS_MIN, + freq); + if (ret < 0) { + dev_err(dev, "Failed to add min-freq constraint (%d)\n", ret); + goto free_req; + } + + freq = DIV_ROUND_UP(cpu->pstate.turbo_freq * global.max_perf_pct, 100); + + ret = freq_qos_add_request(&policy->constraints, req + 1, FREQ_QOS_MAX, + freq); + if (ret < 0) { + dev_err(dev, "Failed to add max-freq constraint (%d)\n", ret); + goto remove_min_req; + } + + policy->driver_data = req; + + return 0; + +remove_min_req: + freq_qos_remove_request(req); +free_req: + kfree(req); +pstate_exit: + intel_pstate_exit_perf_limits(policy); + + return ret; +} + +static int intel_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct freq_qos_request *req; + + req = policy->driver_data; + + freq_qos_remove_request(req + 1); + freq_qos_remove_request(req); + kfree(req); + + return intel_pstate_cpu_exit(policy); +} + +static int intel_cpufreq_suspend(struct cpufreq_policy *policy) +{ + intel_pstate_suspend(policy); + + if (hwp_active) { + struct cpudata *cpu = all_cpu_data[policy->cpu]; + u64 value = READ_ONCE(cpu->hwp_req_cached); + + /* + * Clear the desired perf field in MSR_HWP_REQUEST in case + * intel_cpufreq_adjust_perf() is in use and the last value + * written by it may not be suitable. + */ + value &= ~HWP_DESIRED_PERF(~0L); + wrmsrl_on_cpu(cpu->cpu, MSR_HWP_REQUEST, value); + WRITE_ONCE(cpu->hwp_req_cached, value); + } + + return 0; +} + +static struct cpufreq_driver intel_cpufreq = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = intel_cpufreq_verify_policy, + .target = intel_cpufreq_target, + .fast_switch = intel_cpufreq_fast_switch, + .init = intel_cpufreq_cpu_init, + .exit = intel_cpufreq_cpu_exit, + .offline = intel_cpufreq_cpu_offline, + .online = intel_pstate_cpu_online, + .suspend = intel_cpufreq_suspend, + .resume = intel_pstate_resume, + .update_limits = intel_pstate_update_limits, + .name = "intel_cpufreq", +}; + +static struct cpufreq_driver *default_driver; + +static void intel_pstate_driver_cleanup(void) +{ + unsigned int cpu; + + cpus_read_lock(); + for_each_online_cpu(cpu) { + if (all_cpu_data[cpu]) { + if (intel_pstate_driver == &intel_pstate) + intel_pstate_clear_update_util_hook(cpu); + + spin_lock(&hwp_notify_lock); + kfree(all_cpu_data[cpu]); + WRITE_ONCE(all_cpu_data[cpu], NULL); + spin_unlock(&hwp_notify_lock); + } + } + cpus_read_unlock(); + + intel_pstate_driver = NULL; +} + +static int intel_pstate_register_driver(struct cpufreq_driver *driver) +{ + int ret; + + if (driver == &intel_pstate) + intel_pstate_sysfs_expose_hwp_dynamic_boost(); + + memset(&global, 0, sizeof(global)); + global.max_perf_pct = 100; + + intel_pstate_driver = driver; + ret = cpufreq_register_driver(intel_pstate_driver); + if (ret) { + intel_pstate_driver_cleanup(); + return ret; + } + + global.min_perf_pct = min_perf_pct_min(); + + return 0; +} + +static ssize_t intel_pstate_show_status(char *buf) +{ + if (!intel_pstate_driver) + return sprintf(buf, "off\n"); + + return sprintf(buf, "%s\n", intel_pstate_driver == &intel_pstate ? + "active" : "passive"); +} + +static int intel_pstate_update_status(const char *buf, size_t size) +{ + if (size == 3 && !strncmp(buf, "off", size)) { + if (!intel_pstate_driver) + return -EINVAL; + + if (hwp_active) + return -EBUSY; + + cpufreq_unregister_driver(intel_pstate_driver); + intel_pstate_driver_cleanup(); + return 0; + } + + if (size == 6 && !strncmp(buf, "active", size)) { + if (intel_pstate_driver) { + if (intel_pstate_driver == &intel_pstate) + return 0; + + cpufreq_unregister_driver(intel_pstate_driver); + } + + return intel_pstate_register_driver(&intel_pstate); + } + + if (size == 7 && !strncmp(buf, "passive", size)) { + if (intel_pstate_driver) { + if (intel_pstate_driver == &intel_cpufreq) + return 0; + + cpufreq_unregister_driver(intel_pstate_driver); + intel_pstate_sysfs_hide_hwp_dynamic_boost(); + } + + return intel_pstate_register_driver(&intel_cpufreq); + } + + return -EINVAL; +} + +static int no_load __initdata; +static int no_hwp __initdata; +static int hwp_only __initdata; +static unsigned int force_load __initdata; + +static int __init intel_pstate_msrs_not_valid(void) +{ + if (!pstate_funcs.get_max(0) || + !pstate_funcs.get_min(0) || + !pstate_funcs.get_turbo(0)) + return -ENODEV; + + return 0; +} + +static void __init copy_cpu_funcs(struct pstate_funcs *funcs) +{ + pstate_funcs.get_max = funcs->get_max; + pstate_funcs.get_max_physical = funcs->get_max_physical; + pstate_funcs.get_min = funcs->get_min; + pstate_funcs.get_turbo = funcs->get_turbo; + pstate_funcs.get_scaling = funcs->get_scaling; + pstate_funcs.get_val = funcs->get_val; + pstate_funcs.get_vid = funcs->get_vid; + pstate_funcs.get_aperf_mperf_shift = funcs->get_aperf_mperf_shift; +} + +#ifdef CONFIG_ACPI + +static bool __init intel_pstate_no_acpi_pss(void) +{ + int i; + + for_each_possible_cpu(i) { + acpi_status status; + union acpi_object *pss; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_processor *pr = per_cpu(processors, i); + + if (!pr) + continue; + + status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer); + if (ACPI_FAILURE(status)) + continue; + + pss = buffer.pointer; + if (pss && pss->type == ACPI_TYPE_PACKAGE) { + kfree(pss); + return false; + } + + kfree(pss); + } + + pr_debug("ACPI _PSS not found\n"); + return true; +} + +static bool __init intel_pstate_no_acpi_pcch(void) +{ + acpi_status status; + acpi_handle handle; + + status = acpi_get_handle(NULL, "\\_SB", &handle); + if (ACPI_FAILURE(status)) + goto not_found; + + if (acpi_has_method(handle, "PCCH")) + return false; + +not_found: + pr_debug("ACPI PCCH not found\n"); + return true; +} + +static bool __init intel_pstate_has_acpi_ppc(void) +{ + int i; + + for_each_possible_cpu(i) { + struct acpi_processor *pr = per_cpu(processors, i); + + if (!pr) + continue; + if (acpi_has_method(pr->handle, "_PPC")) + return true; + } + pr_debug("ACPI _PPC not found\n"); + return false; +} + +enum { + PSS, + PPC, +}; + +/* Hardware vendor-specific info that has its own power management modes */ +static struct acpi_platform_list plat_info[] __initdata = { + {"HP ", "ProLiant", 0, ACPI_SIG_FADT, all_versions, NULL, PSS}, + {"ORACLE", "X4-2 ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4-2L ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4-2B ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X3-2 ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X3-2L ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X3-2B ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4470M2 ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4270M3 ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4270M2 ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4170M2 ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4170 M3", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X4275 M3", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "X6-2 ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + {"ORACLE", "Sudbury ", 0, ACPI_SIG_FADT, all_versions, NULL, PPC}, + { } /* End */ +}; + +#define BITMASK_OOB (BIT(8) | BIT(18)) + +static bool __init intel_pstate_platform_pwr_mgmt_exists(void) +{ + const struct x86_cpu_id *id; + u64 misc_pwr; + int idx; + + id = x86_match_cpu(intel_pstate_cpu_oob_ids); + if (id) { + rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr); + if (misc_pwr & BITMASK_OOB) { + pr_debug("Bit 8 or 18 in the MISC_PWR_MGMT MSR set\n"); + pr_debug("P states are controlled in Out of Band mode by the firmware/hardware\n"); + return true; + } + } + + idx = acpi_match_platform_list(plat_info); + if (idx < 0) + return false; + + switch (plat_info[idx].data) { + case PSS: + if (!intel_pstate_no_acpi_pss()) + return false; + + return intel_pstate_no_acpi_pcch(); + case PPC: + return intel_pstate_has_acpi_ppc() && !force_load; + } + + return false; +} + +static void intel_pstate_request_control_from_smm(void) +{ + /* + * It may be unsafe to request P-states control from SMM if _PPC support + * has not been enabled. + */ + if (acpi_ppc) + acpi_processor_pstate_control(); +} +#else /* CONFIG_ACPI not enabled */ +static inline bool intel_pstate_platform_pwr_mgmt_exists(void) { return false; } +static inline bool intel_pstate_has_acpi_ppc(void) { return false; } +static inline void intel_pstate_request_control_from_smm(void) {} +#endif /* CONFIG_ACPI */ + +#define INTEL_PSTATE_HWP_BROADWELL 0x01 + +#define X86_MATCH_HWP(model, hwp_mode) \ + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, INTEL_FAM6_##model, \ + X86_FEATURE_HWP, hwp_mode) + +static const struct x86_cpu_id hwp_support_ids[] __initconst = { + X86_MATCH_HWP(BROADWELL_X, INTEL_PSTATE_HWP_BROADWELL), + X86_MATCH_HWP(BROADWELL_D, INTEL_PSTATE_HWP_BROADWELL), + X86_MATCH_HWP(ANY, 0), + {} +}; + +static bool intel_pstate_hwp_is_enabled(void) +{ + u64 value; + + rdmsrl(MSR_PM_ENABLE, value); + return !!(value & 0x1); +} + +static const struct x86_cpu_id intel_epp_balance_perf[] = { + /* + * Set EPP value as 102, this is the max suggested EPP + * which can result in one core turbo frequency for + * AlderLake Mobile CPUs. + */ + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, 102), + {} +}; + +static int __init intel_pstate_init(void) +{ + static struct cpudata **_all_cpu_data; + const struct x86_cpu_id *id; + int rc; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) + return -ENODEV; + + id = x86_match_cpu(hwp_support_ids); + if (id) { + bool hwp_forced = intel_pstate_hwp_is_enabled(); + + if (hwp_forced) + pr_info("HWP enabled by BIOS\n"); + else if (no_load) + return -ENODEV; + + copy_cpu_funcs(&core_funcs); + /* + * Avoid enabling HWP for processors without EPP support, + * because that means incomplete HWP implementation which is a + * corner case and supporting it is generally problematic. + * + * If HWP is enabled already, though, there is no choice but to + * deal with it. + */ + if ((!no_hwp && boot_cpu_has(X86_FEATURE_HWP_EPP)) || hwp_forced) { + WRITE_ONCE(hwp_active, 1); + hwp_mode_bdw = id->driver_data; + intel_pstate.attr = hwp_cpufreq_attrs; + intel_cpufreq.attr = hwp_cpufreq_attrs; + intel_cpufreq.flags |= CPUFREQ_NEED_UPDATE_LIMITS; + intel_cpufreq.adjust_perf = intel_cpufreq_adjust_perf; + if (!default_driver) + default_driver = &intel_pstate; + + if (boot_cpu_has(X86_FEATURE_HYBRID_CPU)) + pstate_funcs.get_cpu_scaling = hybrid_get_cpu_scaling; + + goto hwp_cpu_matched; + } + pr_info("HWP not enabled\n"); + } else { + if (no_load) + return -ENODEV; + + id = x86_match_cpu(intel_pstate_cpu_ids); + if (!id) { + pr_info("CPU model not supported\n"); + return -ENODEV; + } + + copy_cpu_funcs((struct pstate_funcs *)id->driver_data); + } + + if (intel_pstate_msrs_not_valid()) { + pr_info("Invalid MSRs\n"); + return -ENODEV; + } + /* Without HWP start in the passive mode. */ + if (!default_driver) + default_driver = &intel_cpufreq; + +hwp_cpu_matched: + /* + * The Intel pstate driver will be ignored if the platform + * firmware has its own power management modes. + */ + if (intel_pstate_platform_pwr_mgmt_exists()) { + pr_info("P-states controlled by the platform\n"); + return -ENODEV; + } + + if (!hwp_active && hwp_only) + return -ENOTSUPP; + + pr_info("Intel P-state driver initializing\n"); + + _all_cpu_data = vzalloc(array_size(sizeof(void *), num_possible_cpus())); + if (!_all_cpu_data) + return -ENOMEM; + + WRITE_ONCE(all_cpu_data, _all_cpu_data); + + intel_pstate_request_control_from_smm(); + + intel_pstate_sysfs_expose_params(); + + if (hwp_active) { + const struct x86_cpu_id *id = x86_match_cpu(intel_epp_balance_perf); + + if (id) + epp_values[EPP_INDEX_BALANCE_PERFORMANCE] = id->driver_data; + } + + mutex_lock(&intel_pstate_driver_lock); + rc = intel_pstate_register_driver(default_driver); + mutex_unlock(&intel_pstate_driver_lock); + if (rc) { + intel_pstate_sysfs_remove(); + return rc; + } + + if (hwp_active) { + const struct x86_cpu_id *id; + + id = x86_match_cpu(intel_pstate_cpu_ee_disable_ids); + if (id) { + set_power_ctl_ee_state(false); + pr_info("Disabling energy efficiency optimization\n"); + } + + pr_info("HWP enabled\n"); + } else if (boot_cpu_has(X86_FEATURE_HYBRID_CPU)) { + pr_warn("Problematic setup: Hybrid processor with disabled HWP\n"); + } + + return 0; +} +device_initcall(intel_pstate_init); + +static int __init intel_pstate_setup(char *str) +{ + if (!str) + return -EINVAL; + + if (!strcmp(str, "disable")) + no_load = 1; + else if (!strcmp(str, "active")) + default_driver = &intel_pstate; + else if (!strcmp(str, "passive")) + default_driver = &intel_cpufreq; + + if (!strcmp(str, "no_hwp")) + no_hwp = 1; + + if (!strcmp(str, "force")) + force_load = 1; + if (!strcmp(str, "hwp_only")) + hwp_only = 1; + if (!strcmp(str, "per_cpu_perf_limits")) + per_cpu_limits = true; + +#ifdef CONFIG_ACPI + if (!strcmp(str, "support_acpi_ppc")) + acpi_ppc = true; +#endif + + return 0; +} +early_param("intel_pstate", intel_pstate_setup); + +MODULE_AUTHOR("Dirk Brandewie <dirk.j.brandewie@intel.com>"); +MODULE_DESCRIPTION("'intel_pstate' - P state driver Intel Core processors"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c new file mode 100644 index 000000000..70ad8fe1d --- /dev/null +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood + * + * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <asm/proc-fns.h> + +#define CPU_SW_INT_BLK BIT(28) + +static struct priv +{ + struct clk *cpu_clk; + struct clk *ddr_clk; + struct clk *powersave_clk; + struct device *dev; + void __iomem *base; +} priv; + +#define STATE_CPU_FREQ 0x01 +#define STATE_DDR_FREQ 0x02 + +/* + * Kirkwood can swap the clock to the CPU between two clocks: + * + * - cpu clk + * - ddr clk + * + * The frequencies are set at runtime before registering this table. + */ +static struct cpufreq_frequency_table kirkwood_freq_table[] = { + {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */ + {0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */ + {0, 0, CPUFREQ_TABLE_END}, +}; + +static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) +{ + return clk_get_rate(priv.powersave_clk) / 1000; +} + +static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int state = kirkwood_freq_table[index].driver_data; + unsigned long reg; + + local_irq_disable(); + + /* Disable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg |= CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + switch (state) { + case STATE_CPU_FREQ: + clk_set_parent(priv.powersave_clk, priv.cpu_clk); + break; + case STATE_DDR_FREQ: + clk_set_parent(priv.powersave_clk, priv.ddr_clk); + break; + } + + /* Wait-for-Interrupt, while the hardware changes frequency */ + cpu_do_idle(); + + /* Enable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg &= ~CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + local_irq_enable(); + + return 0; +} + +/* Module init and exit code */ +static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + cpufreq_generic_init(policy, kirkwood_freq_table, 5000); + return 0; +} + +static struct cpufreq_driver kirkwood_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .get = kirkwood_cpufreq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = kirkwood_cpufreq_target, + .init = kirkwood_cpufreq_cpu_init, + .name = "kirkwood-cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int kirkwood_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + int err; + + priv.dev = &pdev->dev; + + priv.base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv.base)) + return PTR_ERR(priv.base); + + np = of_cpu_device_node_get(0); + if (!np) { + dev_err(&pdev->dev, "failed to get cpu device node\n"); + return -ENODEV; + } + + priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk"); + if (IS_ERR(priv.cpu_clk)) { + dev_err(priv.dev, "Unable to get cpuclk\n"); + err = PTR_ERR(priv.cpu_clk); + goto out_node; + } + + err = clk_prepare_enable(priv.cpu_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare cpuclk\n"); + goto out_node; + } + + kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000; + + priv.ddr_clk = of_clk_get_by_name(np, "ddrclk"); + if (IS_ERR(priv.ddr_clk)) { + dev_err(priv.dev, "Unable to get ddrclk\n"); + err = PTR_ERR(priv.ddr_clk); + goto out_cpu; + } + + err = clk_prepare_enable(priv.ddr_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare ddrclk\n"); + goto out_cpu; + } + kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000; + + priv.powersave_clk = of_clk_get_by_name(np, "powersave"); + if (IS_ERR(priv.powersave_clk)) { + dev_err(priv.dev, "Unable to get powersave\n"); + err = PTR_ERR(priv.powersave_clk); + goto out_ddr; + } + err = clk_prepare_enable(priv.powersave_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare powersave clk\n"); + goto out_ddr; + } + + err = cpufreq_register_driver(&kirkwood_cpufreq_driver); + if (err) { + dev_err(priv.dev, "Failed to register cpufreq driver\n"); + goto out_powersave; + } + + of_node_put(np); + return 0; + +out_powersave: + clk_disable_unprepare(priv.powersave_clk); +out_ddr: + clk_disable_unprepare(priv.ddr_clk); +out_cpu: + clk_disable_unprepare(priv.cpu_clk); +out_node: + of_node_put(np); + + return err; +} + +static int kirkwood_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&kirkwood_cpufreq_driver); + + clk_disable_unprepare(priv.powersave_clk); + clk_disable_unprepare(priv.ddr_clk); + clk_disable_unprepare(priv.cpu_clk); + + return 0; +} + +static struct platform_driver kirkwood_cpufreq_platform_driver = { + .probe = kirkwood_cpufreq_probe, + .remove = kirkwood_cpufreq_remove, + .driver = { + .name = "kirkwood-cpufreq", + }, +}; + +module_platform_driver(kirkwood_cpufreq_platform_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch"); +MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU"); +MODULE_ALIAS("platform:kirkwood-cpufreq"); diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c new file mode 100644 index 000000000..3e000e1a7 --- /dev/null +++ b/drivers/cpufreq/longhaul.c @@ -0,0 +1,1000 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2001-2004 Dave Jones. + * (C) 2002 Padraig Brady. <padraig@antefacto.com> + * + * Based upon datasheets & sample CPUs kindly provided by VIA. + * + * VIA have currently 3 different versions of Longhaul. + * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. + * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. + * Version 2 of longhaul is backward compatible with v1, but adds + * LONGHAUL MSR for purpose of both frequency and voltage scaling. + * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). + * Version 3 of longhaul got renamed to Powersaver and redesigned + * to use only the POWERSAVER MSR at 0x110a. + * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. + * It's pretty much the same feature wise to longhaul v2, though + * there is provision for scaling FSB too, but this doesn't work + * too well in practice so we don't even try to use this. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/acpi.h> + +#include <asm/msr.h> +#include <asm/cpu_device_id.h> +#include <acpi/processor.h> + +#include "longhaul.h" + +#define TYPE_LONGHAUL_V1 1 +#define TYPE_LONGHAUL_V2 2 +#define TYPE_POWERSAVER 3 + +#define CPU_SAMUEL 1 +#define CPU_SAMUEL2 2 +#define CPU_EZRA 3 +#define CPU_EZRA_T 4 +#define CPU_NEHEMIAH 5 +#define CPU_NEHEMIAH_C 6 + +/* Flags */ +#define USE_ACPI_C3 (1 << 1) +#define USE_NORTHBRIDGE (1 << 2) + +static int cpu_model; +static unsigned int numscales = 16; +static unsigned int fsb; + +static const struct mV_pos *vrm_mV_table; +static const unsigned char *mV_vrm_table; + +static unsigned int highest_speed, lowest_speed; /* kHz */ +static unsigned int minmult, maxmult; +static int can_scale_voltage; +static struct acpi_processor *pr; +static struct acpi_processor_cx *cx; +static u32 acpi_regs_addr; +static u8 longhaul_flags; +static unsigned int longhaul_index; + +/* Module parameters */ +static int scale_voltage; +static int disable_acpi_c3; +static int revid_errata; +static int enable; + +/* Clock ratios multiplied by 10 */ +static int mults[32]; +static int eblcr[32]; +static int longhaul_version; +static struct cpufreq_frequency_table *longhaul_table; + +static char speedbuffer[8]; + +static char *print_speed(int speed) +{ + if (speed < 1000) { + snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); + return speedbuffer; + } + + if (speed%1000 == 0) + snprintf(speedbuffer, sizeof(speedbuffer), + "%dGHz", speed/1000); + else + snprintf(speedbuffer, sizeof(speedbuffer), + "%d.%dGHz", speed/1000, (speed%1000)/100); + + return speedbuffer; +} + + +static unsigned int calc_speed(int mult) +{ + int khz; + khz = (mult/10)*fsb; + if (mult%10) + khz += fsb/2; + khz *= 1000; + return khz; +} + + +static int longhaul_get_cpu_mult(void) +{ + unsigned long invalue = 0, lo, hi; + + rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); + invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; + if (longhaul_version == TYPE_LONGHAUL_V2 || + longhaul_version == TYPE_POWERSAVER) { + if (lo & (1<<27)) + invalue += 16; + } + return eblcr[invalue]; +} + +/* For processor with BCR2 MSR */ + +static void do_longhaul1(unsigned int mults_index) +{ + union msr_bcr2 bcr2; + + rdmsrl(MSR_VIA_BCR2, bcr2.val); + /* Enable software clock multiplier */ + bcr2.bits.ESOFTBF = 1; + bcr2.bits.CLOCKMUL = mults_index & 0xff; + + /* Sync to timer tick */ + safe_halt(); + /* Change frequency on next halt or sleep */ + wrmsrl(MSR_VIA_BCR2, bcr2.val); + /* Invoke transition */ + ACPI_FLUSH_CPU_CACHE(); + halt(); + + /* Disable software clock multiplier */ + local_irq_disable(); + rdmsrl(MSR_VIA_BCR2, bcr2.val); + bcr2.bits.ESOFTBF = 0; + wrmsrl(MSR_VIA_BCR2, bcr2.val); +} + +/* For processor with Longhaul MSR */ + +static void do_powersaver(int cx_address, unsigned int mults_index, + unsigned int dir) +{ + union msr_longhaul longhaul; + u32 t; + + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Setup new frequency */ + if (!revid_errata) + longhaul.bits.RevisionKey = longhaul.bits.RevisionID; + else + longhaul.bits.RevisionKey = 0; + longhaul.bits.SoftBusRatio = mults_index & 0xf; + longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; + /* Setup new voltage */ + if (can_scale_voltage) + longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; + /* Sync to timer tick */ + safe_halt(); + /* Raise voltage if necessary */ + if (can_scale_voltage && dir) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + } + + /* Change frequency on next halt or sleep */ + longhaul.bits.EnableSoftBusRatio = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + /* Disable bus ratio bit */ + longhaul.bits.EnableSoftBusRatio = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + + /* Reduce voltage if necessary */ + if (can_scale_voltage && !dir) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + } +} + +/** + * longhaul_set_cpu_frequency() + * @mults_index : bitpattern of the new multiplier. + * + * Sets a new clock ratio. + */ + +static int longhaul_setstate(struct cpufreq_policy *policy, + unsigned int table_index) +{ + unsigned int mults_index; + int speed, mult; + struct cpufreq_freqs freqs; + unsigned long flags; + unsigned int pic1_mask, pic2_mask; + u16 bm_status = 0; + u32 bm_timeout = 1000; + unsigned int dir = 0; + + mults_index = longhaul_table[table_index].driver_data; + /* Safety precautions */ + mult = mults[mults_index & 0x1f]; + if (mult == -1) + return -EINVAL; + + speed = calc_speed(mult); + if ((speed > highest_speed) || (speed < lowest_speed)) + return -EINVAL; + + /* Voltage transition before frequency transition? */ + if (can_scale_voltage && longhaul_index < table_index) + dir = 1; + + freqs.old = calc_speed(longhaul_get_cpu_mult()); + freqs.new = speed; + + pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", + fsb, mult/10, mult%10, print_speed(speed/1000)); +retry_loop: + preempt_disable(); + local_irq_save(flags); + + pic2_mask = inb(0xA1); + pic1_mask = inb(0x21); /* works on C3. save mask. */ + outb(0xFF, 0xA1); /* Overkill */ + outb(0xFE, 0x21); /* TMR0 only */ + + /* Wait while PCI bus is busy. */ + if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE + || ((pr != NULL) && pr->flags.bm_control))) { + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + while (bm_status && bm_timeout) { + outw(1 << 4, acpi_regs_addr); + bm_timeout--; + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + } + } + + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Disable AGP and PCI arbiters */ + outb(3, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { + /* Disable bus master arbitration */ + acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); + } + switch (longhaul_version) { + + /* + * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) + * Software controlled multipliers only. + */ + case TYPE_LONGHAUL_V1: + do_longhaul1(mults_index); + break; + + /* + * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] + * + * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) + * Nehemiah can do FSB scaling too, but this has never been proven + * to work in practice. + */ + case TYPE_LONGHAUL_V2: + case TYPE_POWERSAVER: + if (longhaul_flags & USE_ACPI_C3) { + /* Don't allow wakeup */ + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0); + do_powersaver(cx->address, mults_index, dir); + } else { + do_powersaver(0, mults_index, dir); + } + break; + } + + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Enable arbiters */ + outb(0, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { + /* Enable bus master arbitration */ + acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); + } + outb(pic2_mask, 0xA1); /* restore mask */ + outb(pic1_mask, 0x21); + + local_irq_restore(flags); + preempt_enable(); + + freqs.new = calc_speed(longhaul_get_cpu_mult()); + /* Check if requested frequency is set. */ + if (unlikely(freqs.new != speed)) { + pr_info("Failed to set requested frequency!\n"); + /* Revision ID = 1 but processor is expecting revision key + * equal to 0. Jumpers at the bottom of processor will change + * multiplier and FSB, but will not change bits in Longhaul + * MSR nor enable voltage scaling. */ + if (!revid_errata) { + pr_info("Enabling \"Ignore Revision ID\" option\n"); + revid_errata = 1; + msleep(200); + goto retry_loop; + } + /* Why ACPI C3 sometimes doesn't work is a mystery for me. + * But it does happen. Processor is entering ACPI C3 state, + * but it doesn't change frequency. I tried poking various + * bits in northbridge registers, but without success. */ + if (longhaul_flags & USE_ACPI_C3) { + pr_info("Disabling ACPI C3 support\n"); + longhaul_flags &= ~USE_ACPI_C3; + if (revid_errata) { + pr_info("Disabling \"Ignore Revision ID\" option\n"); + revid_errata = 0; + } + msleep(200); + goto retry_loop; + } + /* This shouldn't happen. Longhaul ver. 2 was reported not + * working on processors without voltage scaling, but with + * RevID = 1. RevID errata will make things right. Just + * to be 100% sure. */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + pr_info("Switching to Longhaul ver. 1\n"); + longhaul_version = TYPE_LONGHAUL_V1; + msleep(200); + goto retry_loop; + } + } + + if (!bm_timeout) { + pr_info("Warning: Timeout while waiting for idle PCI bus\n"); + return -EBUSY; + } + + return 0; +} + +/* + * Centaur decided to make life a little more tricky. + * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. + * Samuel2 and above have to try and guess what the FSB is. + * We do this by assuming we booted at maximum multiplier, and interpolate + * between that value multiplied by possible FSBs and cpu_mhz which + * was calculated at boot time. Really ugly, but no other way to do this. + */ + +#define ROUNDING 0xf + +static int guess_fsb(int mult) +{ + int speed = cpu_khz / 1000; + int i; + int speeds[] = { 666, 1000, 1333, 2000 }; + int f_max, f_min; + + for (i = 0; i < 4; i++) { + f_max = ((speeds[i] * mult) + 50) / 100; + f_max += (ROUNDING / 2); + f_min = f_max - ROUNDING; + if ((speed <= f_max) && (speed >= f_min)) + return speeds[i] / 10; + } + return 0; +} + + +static int longhaul_get_ranges(void) +{ + unsigned int i, j, k = 0; + unsigned int ratio; + int mult; + + /* Get current frequency */ + mult = longhaul_get_cpu_mult(); + if (mult == -1) { + pr_info("Invalid (reserved) multiplier!\n"); + return -EINVAL; + } + fsb = guess_fsb(mult); + if (fsb == 0) { + pr_info("Invalid (reserved) FSB!\n"); + return -EINVAL; + } + /* Get max multiplier - as we always did. + * Longhaul MSR is useful only when voltage scaling is enabled. + * C3 is booting at max anyway. */ + maxmult = mult; + /* Get min multiplier */ + switch (cpu_model) { + case CPU_NEHEMIAH: + minmult = 50; + break; + case CPU_NEHEMIAH_C: + minmult = 40; + break; + default: + minmult = 30; + break; + } + + pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n", + minmult/10, minmult%10, maxmult/10, maxmult%10); + + highest_speed = calc_speed(maxmult); + lowest_speed = calc_speed(minmult); + pr_debug("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, + print_speed(lowest_speed/1000), + print_speed(highest_speed/1000)); + + if (lowest_speed == highest_speed) { + pr_info("highestspeed == lowest, aborting\n"); + return -EINVAL; + } + if (lowest_speed > highest_speed) { + pr_info("nonsense! lowest (%d > %d) !\n", + lowest_speed, highest_speed); + return -EINVAL; + } + + longhaul_table = kcalloc(numscales + 1, sizeof(*longhaul_table), + GFP_KERNEL); + if (!longhaul_table) + return -ENOMEM; + + for (j = 0; j < numscales; j++) { + ratio = mults[j]; + if (ratio == -1) + continue; + if (ratio > maxmult || ratio < minmult) + continue; + longhaul_table[k].frequency = calc_speed(ratio); + longhaul_table[k].driver_data = j; + k++; + } + if (k <= 1) { + kfree(longhaul_table); + return -ENODEV; + } + /* Sort */ + for (j = 0; j < k - 1; j++) { + unsigned int min_f, min_i; + min_f = longhaul_table[j].frequency; + min_i = j; + for (i = j + 1; i < k; i++) { + if (longhaul_table[i].frequency < min_f) { + min_f = longhaul_table[i].frequency; + min_i = i; + } + } + if (min_i != j) { + swap(longhaul_table[j].frequency, + longhaul_table[min_i].frequency); + swap(longhaul_table[j].driver_data, + longhaul_table[min_i].driver_data); + } + } + + longhaul_table[k].frequency = CPUFREQ_TABLE_END; + + /* Find index we are running on */ + for (j = 0; j < k; j++) { + if (mults[longhaul_table[j].driver_data & 0x1f] == mult) { + longhaul_index = j; + break; + } + } + return 0; +} + + +static void longhaul_setup_voltagescaling(void) +{ + struct cpufreq_frequency_table *freq_pos; + union msr_longhaul longhaul; + struct mV_pos minvid, maxvid, vid; + unsigned int j, speed, pos, kHz_step, numvscales; + int min_vid_speed; + + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!(longhaul.bits.RevisionID & 1)) { + pr_info("Voltage scaling not supported by CPU\n"); + return; + } + + if (!longhaul.bits.VRMRev) { + pr_info("VRM 8.5\n"); + vrm_mV_table = &vrm85_mV[0]; + mV_vrm_table = &mV_vrm85[0]; + } else { + pr_info("Mobile VRM\n"); + if (cpu_model < CPU_NEHEMIAH) + return; + vrm_mV_table = &mobilevrm_mV[0]; + mV_vrm_table = &mV_mobilevrm[0]; + } + + minvid = vrm_mV_table[longhaul.bits.MinimumVID]; + maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; + + if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { + pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n", + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); + return; + } + + if (minvid.mV == maxvid.mV) { + pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n", + maxvid.mV/1000, maxvid.mV%1000); + return; + } + + /* How many voltage steps*/ + numvscales = maxvid.pos - minvid.pos + 1; + pr_info("Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", + maxvid.mV/1000, maxvid.mV%1000, + minvid.mV/1000, minvid.mV%1000, + numvscales); + + /* Calculate max frequency at min voltage */ + j = longhaul.bits.MinMHzBR; + if (longhaul.bits.MinMHzBR4) + j += 16; + min_vid_speed = eblcr[j]; + if (min_vid_speed == -1) + return; + switch (longhaul.bits.MinMHzFSB) { + case 0: + min_vid_speed *= 13333; + break; + case 1: + min_vid_speed *= 10000; + break; + case 3: + min_vid_speed *= 6666; + break; + default: + return; + } + if (min_vid_speed >= highest_speed) + return; + /* Calculate kHz for one voltage step */ + kHz_step = (highest_speed - min_vid_speed) / numvscales; + + cpufreq_for_each_entry_idx(freq_pos, longhaul_table, j) { + speed = freq_pos->frequency; + if (speed > min_vid_speed) + pos = (speed - min_vid_speed) / kHz_step + minvid.pos; + else + pos = minvid.pos; + freq_pos->driver_data |= mV_vrm_table[pos] << 8; + vid = vrm_mV_table[mV_vrm_table[pos]]; + pr_info("f: %d kHz, index: %d, vid: %d mV\n", + speed, j, vid.mV); + } + + can_scale_voltage = 1; + pr_info("Voltage scaling enabled\n"); +} + + +static int longhaul_target(struct cpufreq_policy *policy, + unsigned int table_index) +{ + unsigned int i; + unsigned int dir = 0; + u8 vid, current_vid; + int retval = 0; + + if (!can_scale_voltage) + retval = longhaul_setstate(policy, table_index); + else { + /* On test system voltage transitions exceeding single + * step up or down were turning motherboard off. Both + * "ondemand" and "userspace" are unsafe. C7 is doing + * this in hardware, C3 is old and we need to do this + * in software. */ + i = longhaul_index; + current_vid = (longhaul_table[longhaul_index].driver_data >> 8); + current_vid &= 0x1f; + if (table_index > longhaul_index) + dir = 1; + while (i != table_index) { + vid = (longhaul_table[i].driver_data >> 8) & 0x1f; + if (vid != current_vid) { + retval = longhaul_setstate(policy, i); + current_vid = vid; + msleep(200); + } + if (dir) + i++; + else + i--; + } + retval = longhaul_setstate(policy, table_index); + } + + longhaul_index = table_index; + return retval; +} + + +static unsigned int longhaul_get(unsigned int cpu) +{ + if (cpu) + return 0; + return calc_speed(longhaul_get_cpu_mult()); +} + +static acpi_status longhaul_walk_callback(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_device *d = acpi_fetch_acpi_dev(obj_handle); + + if (!d) + return 0; + + *return_value = acpi_driver_data(d); + return 1; +} + +/* VIA don't support PM2 reg, but have something similar */ +static int enable_arbiter_disable(void) +{ + struct pci_dev *dev; + int status = 1; + int reg; + u8 pci_cmd; + + /* Find PLE133 host bridge */ + reg = 0x78; + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, + NULL); + /* Find PM133/VT8605 host bridge */ + if (dev == NULL) + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8605_0, NULL); + /* Find CLE266 host bridge */ + if (dev == NULL) { + reg = 0x76; + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_862X_0, NULL); + /* Find CN400 V-Link host bridge */ + if (dev == NULL) + dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); + } + if (dev != NULL) { + /* Enable access to port 0x22 */ + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + pci_cmd |= 1<<7; + pci_write_config_byte(dev, reg, pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + pr_err("Can't enable access to port 0x22\n"); + status = 0; + } + } + pci_dev_put(dev); + return status; + } + return 0; +} + +static int longhaul_setup_southbridge(void) +{ + struct pci_dev *dev; + u8 pci_cmd; + + /* Find VT8235 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev == NULL) + /* Find VT8237 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8237, NULL); + if (dev != NULL) { + /* Set transition time to max */ + pci_read_config_byte(dev, 0xec, &pci_cmd); + pci_cmd &= ~(1 << 2); + pci_write_config_byte(dev, 0xec, pci_cmd); + pci_read_config_byte(dev, 0xe4, &pci_cmd); + pci_cmd &= ~(1 << 7); + pci_write_config_byte(dev, 0xe4, pci_cmd); + pci_read_config_byte(dev, 0xe5, &pci_cmd); + pci_cmd |= 1 << 7; + pci_write_config_byte(dev, 0xe5, pci_cmd); + /* Get address of ACPI registers block*/ + pci_read_config_byte(dev, 0x81, &pci_cmd); + if (pci_cmd & 1 << 7) { + pci_read_config_dword(dev, 0x88, &acpi_regs_addr); + acpi_regs_addr &= 0xff00; + pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr); + } + + pci_dev_put(dev); + return 1; + } + return 0; +} + +static int longhaul_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + char *cpuname = NULL; + int ret; + u32 lo, hi; + + /* Check what we have on this motherboard */ + switch (c->x86_model) { + case 6: + cpu_model = CPU_SAMUEL; + cpuname = "C3 'Samuel' [C5A]"; + longhaul_version = TYPE_LONGHAUL_V1; + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); + break; + + case 7: + switch (c->x86_stepping) { + case 0: + longhaul_version = TYPE_LONGHAUL_V1; + cpu_model = CPU_SAMUEL2; + cpuname = "C3 'Samuel 2' [C5B]"; + /* Note, this is not a typo, early Samuel2's had + * Samuel1 ratios. */ + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); + break; + case 1 ... 15: + longhaul_version = TYPE_LONGHAUL_V2; + if (c->x86_stepping < 8) { + cpu_model = CPU_SAMUEL2; + cpuname = "C3 'Samuel 2' [C5B]"; + } else { + cpu_model = CPU_EZRA; + cpuname = "C3 'Ezra' [C5C]"; + } + memcpy(mults, ezra_mults, sizeof(ezra_mults)); + memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); + break; + } + break; + + case 8: + cpu_model = CPU_EZRA_T; + cpuname = "C3 'Ezra-T' [C5M]"; + longhaul_version = TYPE_POWERSAVER; + numscales = 32; + memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); + memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); + break; + + case 9: + longhaul_version = TYPE_POWERSAVER; + numscales = 32; + memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); + memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); + switch (c->x86_stepping) { + case 0 ... 1: + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah A' [C5XLOE]"; + break; + case 2 ... 4: + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah B' [C5XLOH]"; + break; + case 5 ... 15: + cpu_model = CPU_NEHEMIAH_C; + cpuname = "C3 'Nehemiah C' [C5P]"; + break; + } + break; + + default: + cpuname = "Unknown"; + break; + } + /* Check Longhaul ver. 2 */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + rdmsr(MSR_VIA_LONGHAUL, lo, hi); + if (lo == 0 && hi == 0) + /* Looks like MSR isn't present */ + longhaul_version = TYPE_LONGHAUL_V1; + } + + pr_info("VIA %s CPU detected. ", cpuname); + switch (longhaul_version) { + case TYPE_LONGHAUL_V1: + case TYPE_LONGHAUL_V2: + pr_cont("Longhaul v%d supported\n", longhaul_version); + break; + case TYPE_POWERSAVER: + pr_cont("Powersaver supported\n"); + break; + } + + /* Doesn't hurt */ + longhaul_setup_southbridge(); + + /* Find ACPI data for processor */ + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, &longhaul_walk_callback, NULL, + NULL, (void *)&pr); + + /* Check ACPI support for C3 state */ + if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { + cx = &pr->power.states[ACPI_STATE_C3]; + if (cx->address > 0 && cx->latency <= 1000) + longhaul_flags |= USE_ACPI_C3; + } + /* Disable if it isn't working */ + if (disable_acpi_c3) + longhaul_flags &= ~USE_ACPI_C3; + /* Check if northbridge is friendly */ + if (enable_arbiter_disable()) + longhaul_flags |= USE_NORTHBRIDGE; + + /* Check ACPI support for bus master arbiter disable */ + if (!(longhaul_flags & USE_ACPI_C3 + || longhaul_flags & USE_NORTHBRIDGE) + && ((pr == NULL) || !(pr->flags.bm_control))) { + pr_err("No ACPI support: Unsupported northbridge\n"); + return -ENODEV; + } + + if (longhaul_flags & USE_NORTHBRIDGE) + pr_info("Using northbridge support\n"); + if (longhaul_flags & USE_ACPI_C3) + pr_info("Using ACPI support\n"); + + ret = longhaul_get_ranges(); + if (ret != 0) + return ret; + + if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) + longhaul_setup_voltagescaling(); + + policy->transition_delay_us = 200000; /* usec */ + policy->freq_table = longhaul_table; + + return 0; +} + +static struct cpufreq_driver longhaul_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = longhaul_target, + .get = longhaul_get, + .init = longhaul_cpu_init, + .name = "longhaul", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id longhaul_id[] = { + X86_MATCH_VENDOR_FAM(CENTAUR, 6, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, longhaul_id); + +static int __init longhaul_init(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + + if (!x86_match_cpu(longhaul_id)) + return -ENODEV; + + if (!enable) { + pr_err("Option \"enable\" not set - Aborting\n"); + return -ENODEV; + } +#ifdef CONFIG_SMP + if (num_online_cpus() > 1) { + pr_err("More than 1 CPU detected, longhaul disabled\n"); + return -ENODEV; + } +#endif +#ifdef CONFIG_X86_IO_APIC + if (boot_cpu_has(X86_FEATURE_APIC)) { + pr_err("APIC detected. Longhaul is currently broken in this configuration.\n"); + return -ENODEV; + } +#endif + switch (c->x86_model) { + case 6 ... 9: + return cpufreq_register_driver(&longhaul_driver); + case 10: + pr_err("Use acpi-cpufreq driver for VIA C7\n"); + } + + return -ENODEV; +} + + +static void __exit longhaul_exit(void) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(0); + int i; + + for (i = 0; i < numscales; i++) { + if (mults[i] == maxmult) { + struct cpufreq_freqs freqs; + + freqs.old = policy->cur; + freqs.new = longhaul_table[i].frequency; + freqs.flags = 0; + + cpufreq_freq_transition_begin(policy, &freqs); + longhaul_setstate(policy, i); + cpufreq_freq_transition_end(policy, &freqs, 0); + break; + } + } + + cpufreq_cpu_put(policy); + cpufreq_unregister_driver(&longhaul_driver); + kfree(longhaul_table); +} + +/* Even if BIOS is exporting ACPI C3 state, and it is used + * with success when CPU is idle, this state doesn't + * trigger frequency transition in some cases. */ +module_param(disable_acpi_c3, int, 0644); +MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); +/* Change CPU voltage with frequency. Very useful to save + * power, but most VIA C3 processors aren't supporting it. */ +module_param(scale_voltage, int, 0644); +MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); +/* Force revision key to 0 for processors which doesn't + * support voltage scaling, but are introducing itself as + * such. */ +module_param(revid_errata, int, 0644); +MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); +/* By default driver is disabled to prevent incompatible + * system freeze. */ +module_param(enable, int, 0644); +MODULE_PARM_DESC(enable, "Enable driver"); + +MODULE_AUTHOR("Dave Jones"); +MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); +MODULE_LICENSE("GPL"); + +late_initcall(longhaul_init); +module_exit(longhaul_exit); diff --git a/drivers/cpufreq/longhaul.h b/drivers/cpufreq/longhaul.h new file mode 100644 index 000000000..89c4cc297 --- /dev/null +++ b/drivers/cpufreq/longhaul.h @@ -0,0 +1,352 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * longhaul.h + * (C) 2003 Dave Jones. + * + * VIA-specific information + */ + +union msr_bcr2 { + struct { + unsigned Reseved:19, // 18:0 + ESOFTBF:1, // 19 + Reserved2:3, // 22:20 + CLOCKMUL:4, // 26:23 + Reserved3:5; // 31:27 + } bits; + unsigned long val; +}; + +union msr_longhaul { + struct { + unsigned RevisionID:4, // 3:0 + RevisionKey:4, // 7:4 + EnableSoftBusRatio:1, // 8 + EnableSoftVID:1, // 9 + EnableSoftBSEL:1, // 10 + Reserved:3, // 11:13 + SoftBusRatio4:1, // 14 + VRMRev:1, // 15 + SoftBusRatio:4, // 19:16 + SoftVID:5, // 24:20 + Reserved2:3, // 27:25 + SoftBSEL:2, // 29:28 + Reserved3:2, // 31:30 + MaxMHzBR:4, // 35:32 + MaximumVID:5, // 40:36 + MaxMHzFSB:2, // 42:41 + MaxMHzBR4:1, // 43 + Reserved4:4, // 47:44 + MinMHzBR:4, // 51:48 + MinimumVID:5, // 56:52 + MinMHzFSB:2, // 58:57 + MinMHzBR4:1, // 59 + Reserved5:4; // 63:60 + } bits; + unsigned long long val; +}; + +/* + * Clock ratio tables. Div/Mod by 10 to get ratio. + * The eblcr values specify the ratio read from the CPU. + * The mults values specify what to write to the CPU. + */ + +/* + * VIA C3 Samuel 1 & Samuel 2 (stepping 0) + */ +static const int samuel1_mults[16] = { + -1, /* 0000 -> RESERVED */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + -1, /* 0011 -> RESERVED */ + -1, /* 0100 -> RESERVED */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + -1, /* 1110 -> RESERVED */ + -1, /* 1111 -> RESERVED */ +}; + +static const int samuel1_eblcr[16] = { + 50, /* 0000 -> RESERVED */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + -1, /* 0011 -> RESERVED */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + -1, /* 0111 -> RESERVED */ + -1, /* 1000 -> RESERVED */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + -1, /* 1100 -> RESERVED */ + 75, /* 1101 -> 7.5x */ + -1, /* 1110 -> RESERVED */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 Samuel2 Stepping 1->15 + */ +static const int samuel2_eblcr[16] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 110, /* 0111 -> 11.0x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 130, /* 1110 -> 13.0x */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 Ezra + */ +static const int ezra_mults[16] = { + 100, /* 0000 -> 10.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ +}; + +static const int ezra_eblcr[16] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 (Ezra-T) [C5M]. + */ +static const int ezrat_mults[32] = { + 100, /* 0000 -> 10.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ + + -1, /* 0000 -> RESERVED (10.0x) */ + 110, /* 0001 -> 11.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> RESERVED (9.0x)*/ + 105, /* 0100 -> 10.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 135, /* 0111 -> 13.5x */ + 140, /* 1000 -> 14.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 130, /* 1011 -> 13.0x */ + 145, /* 1100 -> 14.5x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + -1, /* 1111 -> RESERVED (12.0x) */ +}; + +static const int ezrat_eblcr[32] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ + + -1, /* 0000 -> RESERVED (9.0x) */ + 110, /* 0001 -> 11.0x */ + 120, /* 0010 -> 12.0x */ + -1, /* 0011 -> RESERVED (10.0x)*/ + 135, /* 0100 -> 13.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 105, /* 0111 -> 10.5x */ + 130, /* 1000 -> 13.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 140, /* 1011 -> 14.0x */ + -1, /* 1100 -> RESERVED (12.0x) */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + 145, /* 1111 -> 14.5x */ +}; + +/* + * VIA C3 Nehemiah */ + +static const int nehemiah_mults[32] = { + 100, /* 0000 -> 10.0x */ + -1, /* 0001 -> 16.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + -1, /* 0101 -> RESERVED */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ + -1, /* 0000 -> 10.0x */ + 110, /* 0001 -> 11.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> 9.0x */ + 105, /* 0100 -> 10.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 135, /* 0111 -> 13.5x */ + 140, /* 1000 -> 14.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 130, /* 1011 -> 13.0x */ + 145, /* 1100 -> 14.5x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + -1, /* 1111 -> 12.0x */ +}; + +static const int nehemiah_eblcr[32] = { + 50, /* 0000 -> 5.0x */ + 160, /* 0001 -> 16.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + -1, /* 0101 -> RESERVED */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ + 90, /* 0000 -> 9.0x */ + 110, /* 0001 -> 11.0x */ + 120, /* 0010 -> 12.0x */ + 100, /* 0011 -> 10.0x */ + 135, /* 0100 -> 13.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 105, /* 0111 -> 10.5x */ + 130, /* 1000 -> 13.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 140, /* 1011 -> 14.0x */ + 120, /* 1100 -> 12.0x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + 145 /* 1111 -> 14.5x */ +}; + +/* + * Voltage scales. Div/Mod by 1000 to get actual voltage. + * Which scale to use depends on the VRM type in use. + */ + +struct mV_pos { + unsigned short mV; + unsigned short pos; +}; + +static const struct mV_pos vrm85_mV[32] = { + {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, + {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, + {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, + {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, + {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, + {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, + {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, + {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} +}; + +static const unsigned char mV_vrm85[32] = { + 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, + 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, + 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, + 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 +}; + +static const struct mV_pos mobilevrm_mV[32] = { + {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, + {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, + {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, + {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, + {975, 15}, {950, 14}, {925, 13}, {900, 12}, + {875, 11}, {850, 10}, {825, 9}, {800, 8}, + {775, 7}, {750, 6}, {725, 5}, {700, 4}, + {675, 3}, {650, 2}, {625, 1}, {600, 0} +}; + +static const unsigned char mV_mobilevrm[32] = { + 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, + 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, + 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, + 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 +}; + diff --git a/drivers/cpufreq/longrun.c b/drivers/cpufreq/longrun.c new file mode 100644 index 000000000..1caaec7c2 --- /dev/null +++ b/drivers/cpufreq/longrun.c @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/timex.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpu_device_id.h> + +static struct cpufreq_driver longrun_driver; + +/** + * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz + * values into per cent values. In TMTA microcode, the following is valid: + * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) + */ +static unsigned int longrun_low_freq, longrun_high_freq; + + +/** + * longrun_get_policy - get the current LongRun policy + * @policy: struct cpufreq_policy where current policy is written into + * + * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS + * and MSR_TMTA_LONGRUN_CTRL + */ +static void longrun_get_policy(struct cpufreq_policy *policy) +{ + u32 msr_lo, msr_hi; + + rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + pr_debug("longrun flags are %x - %x\n", msr_lo, msr_hi); + if (msr_lo & 0x01) + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + else + policy->policy = CPUFREQ_POLICY_POWERSAVE; + + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + pr_debug("longrun ctrl is %x - %x\n", msr_lo, msr_hi); + msr_lo &= 0x0000007F; + msr_hi &= 0x0000007F; + + if (longrun_high_freq <= longrun_low_freq) { + /* Assume degenerate Longrun table */ + policy->min = policy->max = longrun_high_freq; + } else { + policy->min = longrun_low_freq + msr_lo * + ((longrun_high_freq - longrun_low_freq) / 100); + policy->max = longrun_low_freq + msr_hi * + ((longrun_high_freq - longrun_low_freq) / 100); + } + policy->cpu = 0; +} + + +/** + * longrun_set_policy - sets a new CPUFreq policy + * @policy: new policy + * + * Sets a new CPUFreq policy on LongRun-capable processors. This function + * has to be called with cpufreq_driver locked. + */ +static int longrun_set_policy(struct cpufreq_policy *policy) +{ + u32 msr_lo, msr_hi; + u32 pctg_lo, pctg_hi; + + if (!policy) + return -EINVAL; + + if (longrun_high_freq <= longrun_low_freq) { + /* Assume degenerate Longrun table */ + pctg_lo = pctg_hi = 100; + } else { + pctg_lo = (policy->min - longrun_low_freq) / + ((longrun_high_freq - longrun_low_freq) / 100); + pctg_hi = (policy->max - longrun_low_freq) / + ((longrun_high_freq - longrun_low_freq) / 100); + } + + if (pctg_hi > 100) + pctg_hi = 100; + if (pctg_lo > pctg_hi) + pctg_lo = pctg_hi; + + /* performance or economy mode */ + rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + msr_lo &= 0xFFFFFFFE; + switch (policy->policy) { + case CPUFREQ_POLICY_PERFORMANCE: + msr_lo |= 0x00000001; + break; + case CPUFREQ_POLICY_POWERSAVE: + break; + } + wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + + /* lower and upper boundary */ + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + msr_lo &= 0xFFFFFF80; + msr_hi &= 0xFFFFFF80; + msr_lo |= pctg_lo; + msr_hi |= pctg_hi; + wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + + return 0; +} + + +/** + * longrun_verify_poliy - verifies a new CPUFreq policy + * @policy: the policy to verify + * + * Validates a new CPUFreq policy. This function has to be called with + * cpufreq_driver locked. + */ +static int longrun_verify_policy(struct cpufreq_policy_data *policy) +{ + if (!policy) + return -EINVAL; + + policy->cpu = 0; + cpufreq_verify_within_cpu_limits(policy); + + return 0; +} + +static unsigned int longrun_get(unsigned int cpu) +{ + u32 eax, ebx, ecx, edx; + + if (cpu) + return 0; + + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + pr_debug("cpuid eax is %u\n", eax); + + return eax * 1000; +} + +/** + * longrun_determine_freqs - determines the lowest and highest possible core frequency + * @low_freq: an int to put the lowest frequency into + * @high_freq: an int to put the highest frequency into + * + * Determines the lowest and highest possible core frequencies on this CPU. + * This is necessary to calculate the performance percentage according to + * TMTA rules: + * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) + */ +static int longrun_determine_freqs(unsigned int *low_freq, + unsigned int *high_freq) +{ + u32 msr_lo, msr_hi; + u32 save_lo, save_hi; + u32 eax, ebx, ecx, edx; + u32 try_hi; + struct cpuinfo_x86 *c = &cpu_data(0); + + if (!low_freq || !high_freq) + return -EINVAL; + + if (cpu_has(c, X86_FEATURE_LRTI)) { + /* if the LongRun Table Interface is present, the + * detection is a bit easier: + * For minimum frequency, read out the maximum + * level (msr_hi), write that into "currently + * selected level", and read out the frequency. + * For maximum frequency, read out level zero. + */ + /* minimum */ + rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); + wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); + rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); + *low_freq = msr_lo * 1000; /* to kHz */ + + /* maximum */ + wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); + rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); + *high_freq = msr_lo * 1000; /* to kHz */ + + pr_debug("longrun table interface told %u - %u kHz\n", + *low_freq, *high_freq); + + if (*low_freq > *high_freq) + *low_freq = *high_freq; + return 0; + } + + /* set the upper border to the value determined during TSC init */ + *high_freq = (cpu_khz / 1000); + *high_freq = *high_freq * 1000; + pr_debug("high frequency is %u kHz\n", *high_freq); + + /* get current borders */ + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + save_lo = msr_lo & 0x0000007F; + save_hi = msr_hi & 0x0000007F; + + /* if current perf_pctg is larger than 90%, we need to decrease the + * upper limit to make the calculation more accurate. + */ + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + /* try decreasing in 10% steps, some processors react only + * on some barrier values */ + for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { + /* set to 0 to try_hi perf_pctg */ + msr_lo &= 0xFFFFFF80; + msr_hi &= 0xFFFFFF80; + msr_hi |= try_hi; + wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + + /* read out current core MHz and current perf_pctg */ + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + + /* restore values */ + wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); + } + pr_debug("percentage is %u %%, freq is %u MHz\n", ecx, eax); + + /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) + * eqals + * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) + * + * high_freq * perf_pctg is stored tempoarily into "ebx". + */ + ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ + + if ((ecx > 95) || (ecx == 0) || (eax < ebx)) + return -EIO; + + edx = ((eax - ebx) * 100) / (100 - ecx); + *low_freq = edx * 1000; /* back to kHz */ + + pr_debug("low frequency is %u kHz\n", *low_freq); + + if (*low_freq > *high_freq) + *low_freq = *high_freq; + + return 0; +} + + +static int longrun_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + /* detect low and high frequency */ + result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); + if (result) + return result; + + /* cpuinfo and default policy values */ + policy->cpuinfo.min_freq = longrun_low_freq; + policy->cpuinfo.max_freq = longrun_high_freq; + longrun_get_policy(policy); + + return 0; +} + + +static struct cpufreq_driver longrun_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = longrun_verify_policy, + .setpolicy = longrun_set_policy, + .get = longrun_get, + .init = longrun_cpu_init, + .name = "longrun", +}; + +static const struct x86_cpu_id longrun_ids[] = { + X86_MATCH_VENDOR_FEATURE(TRANSMETA, X86_FEATURE_LONGRUN, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, longrun_ids); + +/** + * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver + * + * Initializes the LongRun support. + */ +static int __init longrun_init(void) +{ + if (!x86_match_cpu(longrun_ids)) + return -ENODEV; + return cpufreq_register_driver(&longrun_driver); +} + + +/** + * longrun_exit - unregisters LongRun support + */ +static void __exit longrun_exit(void) +{ + cpufreq_unregister_driver(&longrun_driver); +} + + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " + "Efficeon processors."); +MODULE_LICENSE("GPL"); + +module_init(longrun_init); +module_exit(longrun_exit); diff --git a/drivers/cpufreq/loongson1-cpufreq.c b/drivers/cpufreq/loongson1-cpufreq.c new file mode 100644 index 000000000..fb72d709d --- /dev/null +++ b/drivers/cpufreq/loongson1-cpufreq.c @@ -0,0 +1,222 @@ +/* + * CPU Frequency Scaling for Loongson 1 SoC + * + * Copyright (C) 2014-2016 Zhang, Keguang <keguang.zhang@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <cpufreq.h> +#include <loongson1.h> + +struct ls1x_cpufreq { + struct device *dev; + struct clk *clk; /* CPU clk */ + struct clk *mux_clk; /* MUX of CPU clk */ + struct clk *pll_clk; /* PLL clk */ + struct clk *osc_clk; /* OSC clk */ + unsigned int max_freq; + unsigned int min_freq; +}; + +static struct ls1x_cpufreq *cpufreq; + +static int ls1x_cpufreq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return NOTIFY_OK; +} + +static struct notifier_block ls1x_cpufreq_notifier_block = { + .notifier_call = ls1x_cpufreq_notifier +}; + +static int ls1x_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct device *cpu_dev = get_cpu_device(policy->cpu); + unsigned int old_freq, new_freq; + + old_freq = policy->cur; + new_freq = policy->freq_table[index].frequency; + + /* + * The procedure of reconfiguring CPU clk is as below. + * + * - Reparent CPU clk to OSC clk + * - Reset CPU clock (very important) + * - Reconfigure CPU DIV + * - Reparent CPU clk back to CPU DIV clk + */ + + clk_set_parent(policy->clk, cpufreq->osc_clk); + __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU, + LS1X_CLK_PLL_DIV); + __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU), + LS1X_CLK_PLL_DIV); + clk_set_rate(cpufreq->mux_clk, new_freq * 1000); + clk_set_parent(policy->clk, cpufreq->mux_clk); + dev_dbg(cpu_dev, "%u KHz --> %u KHz\n", old_freq, new_freq); + + return 0; +} + +static int ls1x_cpufreq_init(struct cpufreq_policy *policy) +{ + struct device *cpu_dev = get_cpu_device(policy->cpu); + struct cpufreq_frequency_table *freq_tbl; + unsigned int pll_freq, freq; + int steps, i; + + pll_freq = clk_get_rate(cpufreq->pll_clk) / 1000; + + steps = 1 << DIV_CPU_WIDTH; + freq_tbl = kcalloc(steps, sizeof(*freq_tbl), GFP_KERNEL); + if (!freq_tbl) + return -ENOMEM; + + for (i = 0; i < (steps - 1); i++) { + freq = pll_freq / (i + 1); + if ((freq < cpufreq->min_freq) || (freq > cpufreq->max_freq)) + freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID; + else + freq_tbl[i].frequency = freq; + dev_dbg(cpu_dev, + "cpufreq table: index %d: frequency %d\n", i, + freq_tbl[i].frequency); + } + freq_tbl[i].frequency = CPUFREQ_TABLE_END; + + policy->clk = cpufreq->clk; + cpufreq_generic_init(policy, freq_tbl, 0); + + return 0; +} + +static int ls1x_cpufreq_exit(struct cpufreq_policy *policy) +{ + kfree(policy->freq_table); + return 0; +} + +static struct cpufreq_driver ls1x_cpufreq_driver = { + .name = "cpufreq-ls1x", + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = ls1x_cpufreq_target, + .get = cpufreq_generic_get, + .init = ls1x_cpufreq_init, + .exit = ls1x_cpufreq_exit, + .attr = cpufreq_generic_attr, +}; + +static int ls1x_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_notifier(&ls1x_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + cpufreq_unregister_driver(&ls1x_cpufreq_driver); + + return 0; +} + +static int ls1x_cpufreq_probe(struct platform_device *pdev) +{ + struct plat_ls1x_cpufreq *pdata = dev_get_platdata(&pdev->dev); + struct clk *clk; + int ret; + + if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) { + dev_err(&pdev->dev, "platform data missing\n"); + return -EINVAL; + } + + cpufreq = + devm_kzalloc(&pdev->dev, sizeof(struct ls1x_cpufreq), GFP_KERNEL); + if (!cpufreq) + return -ENOMEM; + + cpufreq->dev = &pdev->dev; + + clk = devm_clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get %s clock\n", + pdata->clk_name); + return PTR_ERR(clk); + } + cpufreq->clk = clk; + + clk = clk_get_parent(clk); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get parent of %s clock\n", + __clk_get_name(cpufreq->clk)); + return PTR_ERR(clk); + } + cpufreq->mux_clk = clk; + + clk = clk_get_parent(clk); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get parent of %s clock\n", + __clk_get_name(cpufreq->mux_clk)); + return PTR_ERR(clk); + } + cpufreq->pll_clk = clk; + + clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get %s clock\n", + pdata->osc_clk_name); + return PTR_ERR(clk); + } + cpufreq->osc_clk = clk; + + cpufreq->max_freq = pdata->max_freq; + cpufreq->min_freq = pdata->min_freq; + + ret = cpufreq_register_driver(&ls1x_cpufreq_driver); + if (ret) { + dev_err(&pdev->dev, + "failed to register CPUFreq driver: %d\n", ret); + return ret; + } + + ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + if (ret) { + dev_err(&pdev->dev, + "failed to register CPUFreq notifier: %d\n",ret); + cpufreq_unregister_driver(&ls1x_cpufreq_driver); + } + + return ret; +} + +static struct platform_driver ls1x_cpufreq_platdrv = { + .probe = ls1x_cpufreq_probe, + .remove = ls1x_cpufreq_remove, + .driver = { + .name = "ls1x-cpufreq", + }, +}; + +module_platform_driver(ls1x_cpufreq_platdrv); + +MODULE_ALIAS("platform:ls1x-cpufreq"); +MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>"); +MODULE_DESCRIPTION("Loongson1 CPUFreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c new file mode 100644 index 000000000..afc59b292 --- /dev/null +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -0,0 +1,184 @@ +/* + * Cpufreq driver for the loongson-2 processors + * + * The 2E revision of loongson processor not support this feature. + * + * Copyright (C) 2006 - 2008 Lemote Inc. & Institute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <asm/idle.h> + +#include <asm/mach-loongson2ef/loongson.h> + +static uint nowait; + +static void (*saved_cpu_wait) (void); + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data); + +static struct notifier_block loongson2_cpufreq_notifier_block = { + .notifier_call = loongson2_cpu_freq_notifier +}; + +static int loongson2_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return 0; +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int loongson2_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int freq; + + freq = + ((cpu_clock_freq / 1000) * + loongson2_clockmod_table[index].driver_data) / 8; + + /* setting the cpu frequency */ + loongson2_cpu_set_rate(freq); + + return 0; +} + +static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int i; + unsigned long rate; + int ret; + + rate = cpu_clock_freq / 1000; + if (!rate) + return -EINVAL; + + /* clock table init */ + for (i = 2; + (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END); + i++) + loongson2_clockmod_table[i].frequency = (rate * i) / 8; + + ret = loongson2_cpu_set_rate(rate); + if (ret) + return ret; + + cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0); + return 0; +} + +static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver loongson2_cpufreq_driver = { + .name = "loongson2", + .init = loongson2_cpufreq_cpu_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = loongson2_cpufreq_target, + .get = cpufreq_generic_get, + .exit = loongson2_cpufreq_exit, + .attr = cpufreq_generic_attr, +}; + +static const struct platform_device_id platform_device_ids[] = { + { + .name = "loongson2_cpufreq", + }, + {} +}; + +MODULE_DEVICE_TABLE(platform, platform_device_ids); + +static struct platform_driver platform_driver = { + .driver = { + .name = "loongson2_cpufreq", + }, + .id_table = platform_device_ids, +}; + +/* + * This is the simple version of Loongson-2 wait, Maybe we need do this in + * interrupt disabled context. + */ + +static DEFINE_SPINLOCK(loongson2_wait_lock); + +static void loongson2_cpu_wait(void) +{ + unsigned long flags; + u32 cpu_freq; + + spin_lock_irqsave(&loongson2_wait_lock, flags); + cpu_freq = readl(LOONGSON_CHIPCFG); + /* Put CPU into wait mode */ + writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG); + /* Restore CPU state */ + writel(cpu_freq, LOONGSON_CHIPCFG); + spin_unlock_irqrestore(&loongson2_wait_lock, flags); + local_irq_enable(); +} + +static int __init cpufreq_init(void) +{ + int ret; + + /* Register platform stuff */ + ret = platform_driver_register(&platform_driver); + if (ret) + return ret; + + pr_info("Loongson-2F CPU frequency driver\n"); + + cpufreq_register_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + ret = cpufreq_register_driver(&loongson2_cpufreq_driver); + + if (!ret && !nowait) { + saved_cpu_wait = cpu_wait; + cpu_wait = loongson2_cpu_wait; + } + + return ret; +} + +static void __exit cpufreq_exit(void) +{ + if (!nowait && saved_cpu_wait) + cpu_wait = saved_cpu_wait; + cpufreq_unregister_driver(&loongson2_cpufreq_driver); + cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + platform_driver_unregister(&platform_driver); +} + +module_init(cpufreq_init); +module_exit(cpufreq_exit); + +module_param(nowait, uint, 0644); +MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait"); + +MODULE_AUTHOR("Yanhua <yanh@lemote.com>"); +MODULE_DESCRIPTION("cpufreq driver for Loongson2F"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c new file mode 100644 index 000000000..28d346062 --- /dev/null +++ b/drivers/cpufreq/maple-cpufreq.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011 Dmitry Eremin-Solenikov + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#undef DEBUG + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <linux/time.h> +#include <linux/of_device.h> + +#define DBG(fmt...) pr_debug(fmt) + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table maple_cpu_freqs[] = { + {0, CPUFREQ_HIGH, 0}, + {0, CPUFREQ_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retrieved from the device-tree + */ +static int maple_pmode_cur; + +static const u32 *maple_pmode_data; +static int maple_pmode_max; + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int maple_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; + + local_irq_save(flags); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + maple_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + local_irq_restore(flags); + + maple_pmode_cur = speed_mode; + ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int maple_scom_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= maple_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* + * Common interface to the cpufreq core + */ + +static int maple_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + return maple_scom_switch_freq(index); +} + +static unsigned int maple_cpufreq_get_speed(unsigned int cpu) +{ + return maple_cpu_freqs[maple_pmode_cur].frequency; +} + +static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + cpufreq_generic_init(policy, maple_cpu_freqs, 12000); + return 0; +} + +static struct cpufreq_driver maple_cpufreq_driver = { + .name = "maple", + .flags = CPUFREQ_CONST_LOOPS, + .init = maple_cpufreq_cpu_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = maple_cpufreq_target, + .get = maple_cpufreq_get_speed, + .attr = cpufreq_generic_attr, +}; + +static int __init maple_cpufreq_init(void) +{ + struct device_node *cpunode; + unsigned int psize; + unsigned long max_freq; + const u32 *valp; + u32 pvr_hi; + int rc = -ENODEV; + + /* + * Behave here like powermac driver which checks machine compatibility + * to ease merging of two drivers in future. + */ + if (!of_machine_is_compatible("Momentum,Maple") && + !of_machine_is_compatible("Momentum,Apache")) + return 0; + + /* Get first CPU node */ + cpunode = of_cpu_device_node_get(0); + if (cpunode == NULL) { + pr_err("Can't find any CPU 0 node\n"); + goto bail_noprops; + } + + /* Check 970FX for now */ + /* we actually don't care on which CPU to access PVR */ + pvr_hi = PVR_VER(mfspr(SPRN_PVR)); + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + pr_err("Unsupported CPU version (%x)\n", pvr_hi); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + /* + * On Maple this property is provided by PIBS in dual-processor config, + * not provided by PIBS in CPU0 config and also not provided by SLOF, + * so YMMV + */ + maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize); + if (!maple_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + maple_pmode_max = psize / sizeof(u32) - 1; + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) + goto bail_noprops; + max_freq = (*valp)/1000; + maple_cpu_freqs[0].frequency = max_freq; + maple_cpu_freqs[1].frequency = max_freq/2; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + msleep(10); + maple_pmode_cur = -1; + maple_scom_switch_freq(maple_scom_query_freq()); + + pr_info("Registering Maple CPU frequency driver\n"); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + maple_cpu_freqs[1].frequency/1000, + maple_cpu_freqs[0].frequency/1000, + maple_cpu_freqs[maple_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&maple_cpufreq_driver); + +bail_noprops: + of_node_put(cpunode); + + return rc; +} + +module_init(maple_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c new file mode 100644 index 000000000..f0e0a35c7 --- /dev/null +++ b/drivers/cpufreq/mediatek-cpufreq-hw.c @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 MediaTek Inc. + */ + +#include <linux/bitfield.h> +#include <linux/cpufreq.h> +#include <linux/energy_model.h> +#include <linux/init.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/slab.h> + +#define LUT_MAX_ENTRIES 32U +#define LUT_FREQ GENMASK(11, 0) +#define LUT_ROW_SIZE 0x4 +#define CPUFREQ_HW_STATUS BIT(0) +#define SVS_HW_STATUS BIT(1) +#define POLL_USEC 1000 +#define TIMEOUT_USEC 300000 + +enum { + REG_FREQ_LUT_TABLE, + REG_FREQ_ENABLE, + REG_FREQ_PERF_STATE, + REG_FREQ_HW_STATE, + REG_EM_POWER_TBL, + REG_FREQ_LATENCY, + + REG_ARRAY_SIZE, +}; + +struct mtk_cpufreq_data { + struct cpufreq_frequency_table *table; + void __iomem *reg_bases[REG_ARRAY_SIZE]; + struct resource *res; + void __iomem *base; + int nr_opp; +}; + +static const u16 cpufreq_mtk_offsets[REG_ARRAY_SIZE] = { + [REG_FREQ_LUT_TABLE] = 0x0, + [REG_FREQ_ENABLE] = 0x84, + [REG_FREQ_PERF_STATE] = 0x88, + [REG_FREQ_HW_STATE] = 0x8c, + [REG_EM_POWER_TBL] = 0x90, + [REG_FREQ_LATENCY] = 0x110, +}; + +static int __maybe_unused +mtk_cpufreq_get_cpu_power(struct device *cpu_dev, unsigned long *uW, + unsigned long *KHz) +{ + struct mtk_cpufreq_data *data; + struct cpufreq_policy *policy; + int i; + + policy = cpufreq_cpu_get_raw(cpu_dev->id); + if (!policy) + return 0; + + data = policy->driver_data; + + for (i = 0; i < data->nr_opp; i++) { + if (data->table[i].frequency < *KHz) + break; + } + i--; + + *KHz = data->table[i].frequency; + /* Provide micro-Watts value to the Energy Model */ + *uW = readl_relaxed(data->reg_bases[REG_EM_POWER_TBL] + + i * LUT_ROW_SIZE); + + return 0; +} + +static int mtk_cpufreq_hw_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + struct mtk_cpufreq_data *data = policy->driver_data; + + writel_relaxed(index, data->reg_bases[REG_FREQ_PERF_STATE]); + + return 0; +} + +static unsigned int mtk_cpufreq_hw_get(unsigned int cpu) +{ + struct mtk_cpufreq_data *data; + struct cpufreq_policy *policy; + unsigned int index; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy) + return 0; + + data = policy->driver_data; + + index = readl_relaxed(data->reg_bases[REG_FREQ_PERF_STATE]); + index = min(index, LUT_MAX_ENTRIES - 1); + + return data->table[index].frequency; +} + +static unsigned int mtk_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct mtk_cpufreq_data *data = policy->driver_data; + unsigned int index; + + index = cpufreq_table_find_index_dl(policy, target_freq, false); + + writel_relaxed(index, data->reg_bases[REG_FREQ_PERF_STATE]); + + return policy->freq_table[index].frequency; +} + +static int mtk_cpu_create_freq_table(struct platform_device *pdev, + struct mtk_cpufreq_data *data) +{ + struct device *dev = &pdev->dev; + u32 temp, i, freq, prev_freq = 0; + void __iomem *base_table; + + data->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1, + sizeof(*data->table), GFP_KERNEL); + if (!data->table) + return -ENOMEM; + + base_table = data->reg_bases[REG_FREQ_LUT_TABLE]; + + for (i = 0; i < LUT_MAX_ENTRIES; i++) { + temp = readl_relaxed(base_table + (i * LUT_ROW_SIZE)); + freq = FIELD_GET(LUT_FREQ, temp) * 1000; + + if (freq == prev_freq) + break; + + data->table[i].frequency = freq; + + dev_dbg(dev, "index=%d freq=%d\n", i, data->table[i].frequency); + + prev_freq = freq; + } + + data->table[i].frequency = CPUFREQ_TABLE_END; + data->nr_opp = i; + + return 0; +} + +static int mtk_cpu_resources_init(struct platform_device *pdev, + struct cpufreq_policy *policy, + const u16 *offsets) +{ + struct mtk_cpufreq_data *data; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *base; + int ret, i; + int index; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + index = of_perf_domain_get_sharing_cpumask(policy->cpu, "performance-domains", + "#performance-domain-cells", + policy->cpus); + if (index < 0) + return index; + + res = platform_get_resource(pdev, IORESOURCE_MEM, index); + if (!res) { + dev_err(dev, "failed to get mem resource %d\n", index); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), res->name)) { + dev_err(dev, "failed to request resource %pR\n", res); + return -EBUSY; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "failed to map resource %pR\n", res); + ret = -ENOMEM; + goto release_region; + } + + data->base = base; + data->res = res; + + for (i = REG_FREQ_LUT_TABLE; i < REG_ARRAY_SIZE; i++) + data->reg_bases[i] = base + offsets[i]; + + ret = mtk_cpu_create_freq_table(pdev, data); + if (ret) { + dev_info(dev, "Domain-%d failed to create freq table\n", index); + return ret; + } + + policy->freq_table = data->table; + policy->driver_data = data; + + return 0; +release_region: + release_mem_region(res->start, resource_size(res)); + return ret; +} + +static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) +{ + struct platform_device *pdev = cpufreq_get_driver_data(); + int sig, pwr_hw = CPUFREQ_HW_STATUS | SVS_HW_STATUS; + struct mtk_cpufreq_data *data; + unsigned int latency; + int ret; + + /* Get the bases of cpufreq for domains */ + ret = mtk_cpu_resources_init(pdev, policy, platform_get_drvdata(pdev)); + if (ret) { + dev_info(&pdev->dev, "CPUFreq resource init failed\n"); + return ret; + } + + data = policy->driver_data; + + latency = readl_relaxed(data->reg_bases[REG_FREQ_LATENCY]) * 1000; + if (!latency) + latency = CPUFREQ_ETERNAL; + + policy->cpuinfo.transition_latency = latency; + policy->fast_switch_possible = true; + + /* HW should be in enabled state to proceed now */ + writel_relaxed(0x1, data->reg_bases[REG_FREQ_ENABLE]); + if (readl_poll_timeout(data->reg_bases[REG_FREQ_HW_STATE], sig, + (sig & pwr_hw) == pwr_hw, POLL_USEC, + TIMEOUT_USEC)) { + if (!(sig & CPUFREQ_HW_STATUS)) { + pr_info("cpufreq hardware of CPU%d is not enabled\n", + policy->cpu); + return -ENODEV; + } + + pr_info("SVS of CPU%d is not enabled\n", policy->cpu); + } + + return 0; +} + +static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) +{ + struct mtk_cpufreq_data *data = policy->driver_data; + struct resource *res = data->res; + void __iomem *base = data->base; + + /* HW should be in paused state now */ + writel_relaxed(0x0, data->reg_bases[REG_FREQ_ENABLE]); + iounmap(base); + release_mem_region(res->start, resource_size(res)); + + return 0; +} + +static void mtk_cpufreq_register_em(struct cpufreq_policy *policy) +{ + struct em_data_callback em_cb = EM_DATA_CB(mtk_cpufreq_get_cpu_power); + struct mtk_cpufreq_data *data = policy->driver_data; + + em_dev_register_perf_domain(get_cpu_device(policy->cpu), data->nr_opp, + &em_cb, policy->cpus, true); +} + +static struct cpufreq_driver cpufreq_mtk_hw_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = mtk_cpufreq_hw_target_index, + .get = mtk_cpufreq_hw_get, + .init = mtk_cpufreq_hw_cpu_init, + .exit = mtk_cpufreq_hw_cpu_exit, + .register_em = mtk_cpufreq_register_em, + .fast_switch = mtk_cpufreq_hw_fast_switch, + .name = "mtk-cpufreq-hw", + .attr = cpufreq_generic_attr, +}; + +static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev) +{ + const void *data; + int ret; + + data = of_device_get_match_data(&pdev->dev); + if (!data) + return -EINVAL; + + platform_set_drvdata(pdev, (void *) data); + cpufreq_mtk_hw_driver.driver_data = pdev; + + ret = cpufreq_register_driver(&cpufreq_mtk_hw_driver); + if (ret) + dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n"); + + return ret; +} + +static int mtk_cpufreq_hw_driver_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&cpufreq_mtk_hw_driver); +} + +static const struct of_device_id mtk_cpufreq_hw_match[] = { + { .compatible = "mediatek,cpufreq-hw", .data = &cpufreq_mtk_offsets }, + {} +}; + +static struct platform_driver mtk_cpufreq_hw_driver = { + .probe = mtk_cpufreq_hw_driver_probe, + .remove = mtk_cpufreq_hw_driver_remove, + .driver = { + .name = "mtk-cpufreq-hw", + .of_match_table = mtk_cpufreq_hw_match, + }, +}; +module_platform_driver(mtk_cpufreq_hw_driver); + +MODULE_AUTHOR("Hector Yuan <hector.yuan@mediatek.com>"); +MODULE_DESCRIPTION("Mediatek cpufreq-hw driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c new file mode 100644 index 000000000..fef68cb2b --- /dev/null +++ b/drivers/cpufreq/mediatek-cpufreq.c @@ -0,0 +1,807 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015 Linaro Ltd. + * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org> + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regulator/consumer.h> + +struct mtk_cpufreq_platform_data { + int min_volt_shift; + int max_volt_shift; + int proc_max_volt; + int sram_min_volt; + int sram_max_volt; + bool ccifreq_supported; +}; + +/* + * The struct mtk_cpu_dvfs_info holds necessary information for doing CPU DVFS + * on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in + * Mediatek SoCs has two voltage inputs, Vproc and Vsram. In some cases the two + * voltage inputs need to be controlled under a hardware limitation: + * 100mV < Vsram - Vproc < 200mV + * + * When scaling the clock frequency of a CPU clock domain, the clock source + * needs to be switched to another stable PLL clock temporarily until + * the original PLL becomes stable at target frequency. + */ +struct mtk_cpu_dvfs_info { + struct cpumask cpus; + struct device *cpu_dev; + struct device *cci_dev; + struct regulator *proc_reg; + struct regulator *sram_reg; + struct clk *cpu_clk; + struct clk *inter_clk; + struct list_head list_head; + int intermediate_voltage; + bool need_voltage_tracking; + int vproc_on_boot; + int pre_vproc; + /* Avoid race condition for regulators between notify and policy */ + struct mutex reg_lock; + struct notifier_block opp_nb; + unsigned int opp_cpu; + unsigned long current_freq; + const struct mtk_cpufreq_platform_data *soc_data; + int vtrack_max; + bool ccifreq_bound; +}; + +static struct platform_device *cpufreq_pdev; + +static LIST_HEAD(dvfs_info_list); + +static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu) +{ + struct mtk_cpu_dvfs_info *info; + + list_for_each_entry(info, &dvfs_info_list, list_head) { + if (cpumask_test_cpu(cpu, &info->cpus)) + return info; + } + + return NULL; +} + +static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info, + int new_vproc) +{ + const struct mtk_cpufreq_platform_data *soc_data = info->soc_data; + struct regulator *proc_reg = info->proc_reg; + struct regulator *sram_reg = info->sram_reg; + int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret; + int retry = info->vtrack_max; + + pre_vproc = regulator_get_voltage(proc_reg); + if (pre_vproc < 0) { + dev_err(info->cpu_dev, + "invalid Vproc value: %d\n", pre_vproc); + return pre_vproc; + } + + pre_vsram = regulator_get_voltage(sram_reg); + if (pre_vsram < 0) { + dev_err(info->cpu_dev, "invalid Vsram value: %d\n", pre_vsram); + return pre_vsram; + } + + new_vsram = clamp(new_vproc + soc_data->min_volt_shift, + soc_data->sram_min_volt, soc_data->sram_max_volt); + + do { + if (pre_vproc <= new_vproc) { + vsram = clamp(pre_vproc + soc_data->max_volt_shift, + soc_data->sram_min_volt, new_vsram); + ret = regulator_set_voltage(sram_reg, vsram, + soc_data->sram_max_volt); + + if (ret) + return ret; + + if (vsram == soc_data->sram_max_volt || + new_vsram == soc_data->sram_min_volt) + vproc = new_vproc; + else + vproc = vsram - soc_data->min_volt_shift; + + ret = regulator_set_voltage(proc_reg, vproc, + soc_data->proc_max_volt); + if (ret) { + regulator_set_voltage(sram_reg, pre_vsram, + soc_data->sram_max_volt); + return ret; + } + } else if (pre_vproc > new_vproc) { + vproc = max(new_vproc, + pre_vsram - soc_data->max_volt_shift); + ret = regulator_set_voltage(proc_reg, vproc, + soc_data->proc_max_volt); + if (ret) + return ret; + + if (vproc == new_vproc) + vsram = new_vsram; + else + vsram = max(new_vsram, + vproc + soc_data->min_volt_shift); + + ret = regulator_set_voltage(sram_reg, vsram, + soc_data->sram_max_volt); + if (ret) { + regulator_set_voltage(proc_reg, pre_vproc, + soc_data->proc_max_volt); + return ret; + } + } + + pre_vproc = vproc; + pre_vsram = vsram; + + if (--retry < 0) { + dev_err(info->cpu_dev, + "over loop count, failed to set voltage\n"); + return -EINVAL; + } + } while (vproc != new_vproc || vsram != new_vsram); + + return 0; +} + +static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc) +{ + const struct mtk_cpufreq_platform_data *soc_data = info->soc_data; + int ret; + + if (info->need_voltage_tracking) + ret = mtk_cpufreq_voltage_tracking(info, vproc); + else + ret = regulator_set_voltage(info->proc_reg, vproc, + soc_data->proc_max_volt); + if (!ret) + info->pre_vproc = vproc; + + return ret; +} + +static bool is_ccifreq_ready(struct mtk_cpu_dvfs_info *info) +{ + struct device_link *sup_link; + + if (info->ccifreq_bound) + return true; + + sup_link = device_link_add(info->cpu_dev, info->cci_dev, + DL_FLAG_AUTOREMOVE_CONSUMER); + if (!sup_link) { + dev_err(info->cpu_dev, "cpu%d: sup_link is NULL\n", info->opp_cpu); + return false; + } + + if (sup_link->supplier->links.status != DL_DEV_DRIVER_BOUND) + return false; + + info->ccifreq_bound = true; + + return true; +} + +static int mtk_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct cpufreq_frequency_table *freq_table = policy->freq_table; + struct clk *cpu_clk = policy->clk; + struct clk *armpll = clk_get_parent(cpu_clk); + struct mtk_cpu_dvfs_info *info = policy->driver_data; + struct device *cpu_dev = info->cpu_dev; + struct dev_pm_opp *opp; + long freq_hz, pre_freq_hz; + int vproc, pre_vproc, inter_vproc, target_vproc, ret; + + inter_vproc = info->intermediate_voltage; + + pre_freq_hz = clk_get_rate(cpu_clk); + + mutex_lock(&info->reg_lock); + + if (unlikely(info->pre_vproc <= 0)) + pre_vproc = regulator_get_voltage(info->proc_reg); + else + pre_vproc = info->pre_vproc; + + if (pre_vproc < 0) { + dev_err(cpu_dev, "invalid Vproc value: %d\n", pre_vproc); + ret = pre_vproc; + goto out; + } + + freq_hz = freq_table[index].frequency * 1000; + + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); + if (IS_ERR(opp)) { + dev_err(cpu_dev, "cpu%d: failed to find OPP for %ld\n", + policy->cpu, freq_hz); + ret = PTR_ERR(opp); + goto out; + } + vproc = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + /* + * If MediaTek cci is supported but is not ready, we will use the value + * of max(target cpu voltage, booting voltage) to prevent high freqeuncy + * low voltage crash. + */ + if (info->soc_data->ccifreq_supported && !is_ccifreq_ready(info)) + vproc = max(vproc, info->vproc_on_boot); + + /* + * If the new voltage or the intermediate voltage is higher than the + * current voltage, scale up voltage first. + */ + target_vproc = max(inter_vproc, vproc); + if (pre_vproc <= target_vproc) { + ret = mtk_cpufreq_set_voltage(info, target_vproc); + if (ret) { + dev_err(cpu_dev, + "cpu%d: failed to scale up voltage!\n", policy->cpu); + mtk_cpufreq_set_voltage(info, pre_vproc); + goto out; + } + } + + /* Reparent the CPU clock to intermediate clock. */ + ret = clk_set_parent(cpu_clk, info->inter_clk); + if (ret) { + dev_err(cpu_dev, + "cpu%d: failed to re-parent cpu clock!\n", policy->cpu); + mtk_cpufreq_set_voltage(info, pre_vproc); + goto out; + } + + /* Set the original PLL to target rate. */ + ret = clk_set_rate(armpll, freq_hz); + if (ret) { + dev_err(cpu_dev, + "cpu%d: failed to scale cpu clock rate!\n", policy->cpu); + clk_set_parent(cpu_clk, armpll); + mtk_cpufreq_set_voltage(info, pre_vproc); + goto out; + } + + /* Set parent of CPU clock back to the original PLL. */ + ret = clk_set_parent(cpu_clk, armpll); + if (ret) { + dev_err(cpu_dev, + "cpu%d: failed to re-parent cpu clock!\n", policy->cpu); + mtk_cpufreq_set_voltage(info, inter_vproc); + goto out; + } + + /* + * If the new voltage is lower than the intermediate voltage or the + * original voltage, scale down to the new voltage. + */ + if (vproc < inter_vproc || vproc < pre_vproc) { + ret = mtk_cpufreq_set_voltage(info, vproc); + if (ret) { + dev_err(cpu_dev, + "cpu%d: failed to scale down voltage!\n", policy->cpu); + clk_set_parent(cpu_clk, info->inter_clk); + clk_set_rate(armpll, pre_freq_hz); + clk_set_parent(cpu_clk, armpll); + goto out; + } + } + + info->current_freq = freq_hz; + +out: + mutex_unlock(&info->reg_lock); + + return ret; +} + +#define DYNAMIC_POWER "dynamic-power-coefficient" + +static int mtk_cpufreq_opp_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct dev_pm_opp *opp = data; + struct dev_pm_opp *new_opp; + struct mtk_cpu_dvfs_info *info; + unsigned long freq, volt; + struct cpufreq_policy *policy; + int ret = 0; + + info = container_of(nb, struct mtk_cpu_dvfs_info, opp_nb); + + if (event == OPP_EVENT_ADJUST_VOLTAGE) { + freq = dev_pm_opp_get_freq(opp); + + mutex_lock(&info->reg_lock); + if (info->current_freq == freq) { + volt = dev_pm_opp_get_voltage(opp); + ret = mtk_cpufreq_set_voltage(info, volt); + if (ret) + dev_err(info->cpu_dev, + "failed to scale voltage: %d\n", ret); + } + mutex_unlock(&info->reg_lock); + } else if (event == OPP_EVENT_DISABLE) { + freq = dev_pm_opp_get_freq(opp); + + /* case of current opp item is disabled */ + if (info->current_freq == freq) { + freq = 1; + new_opp = dev_pm_opp_find_freq_ceil(info->cpu_dev, + &freq); + if (IS_ERR(new_opp)) { + dev_err(info->cpu_dev, + "all opp items are disabled\n"); + ret = PTR_ERR(new_opp); + return notifier_from_errno(ret); + } + + dev_pm_opp_put(new_opp); + policy = cpufreq_cpu_get(info->opp_cpu); + if (policy) { + cpufreq_driver_target(policy, freq / 1000, + CPUFREQ_RELATION_L); + cpufreq_cpu_put(policy); + } + } + } + + return notifier_from_errno(ret); +} + +static struct device *of_get_cci(struct device *cpu_dev) +{ + struct device_node *np; + struct platform_device *pdev; + + np = of_parse_phandle(cpu_dev->of_node, "mediatek,cci", 0); + if (!np) + return ERR_PTR(-ENODEV); + + pdev = of_find_device_by_node(np); + of_node_put(np); + if (!pdev) + return ERR_PTR(-ENODEV); + + return &pdev->dev; +} + +static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) +{ + struct device *cpu_dev; + struct dev_pm_opp *opp; + unsigned long rate; + int ret; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + dev_err(cpu_dev, "failed to get cpu%d device\n", cpu); + return -ENODEV; + } + info->cpu_dev = cpu_dev; + + info->ccifreq_bound = false; + if (info->soc_data->ccifreq_supported) { + info->cci_dev = of_get_cci(info->cpu_dev); + if (IS_ERR(info->cci_dev)) { + ret = PTR_ERR(info->cci_dev); + dev_err(cpu_dev, "cpu%d: failed to get cci device\n", cpu); + return -ENODEV; + } + } + + info->cpu_clk = clk_get(cpu_dev, "cpu"); + if (IS_ERR(info->cpu_clk)) { + ret = PTR_ERR(info->cpu_clk); + return dev_err_probe(cpu_dev, ret, + "cpu%d: failed to get cpu clk\n", cpu); + } + + info->inter_clk = clk_get(cpu_dev, "intermediate"); + if (IS_ERR(info->inter_clk)) { + ret = PTR_ERR(info->inter_clk); + dev_err_probe(cpu_dev, ret, + "cpu%d: failed to get intermediate clk\n", cpu); + goto out_free_mux_clock; + } + + info->proc_reg = regulator_get_optional(cpu_dev, "proc"); + if (IS_ERR(info->proc_reg)) { + ret = PTR_ERR(info->proc_reg); + dev_err_probe(cpu_dev, ret, + "cpu%d: failed to get proc regulator\n", cpu); + goto out_free_inter_clock; + } + + ret = regulator_enable(info->proc_reg); + if (ret) { + dev_warn(cpu_dev, "cpu%d: failed to enable vproc\n", cpu); + goto out_free_proc_reg; + } + + /* Both presence and absence of sram regulator are valid cases. */ + info->sram_reg = regulator_get_optional(cpu_dev, "sram"); + if (IS_ERR(info->sram_reg)) { + ret = PTR_ERR(info->sram_reg); + if (ret == -EPROBE_DEFER) + goto out_disable_proc_reg; + + info->sram_reg = NULL; + } else { + ret = regulator_enable(info->sram_reg); + if (ret) { + dev_warn(cpu_dev, "cpu%d: failed to enable vsram\n", cpu); + goto out_free_sram_reg; + } + } + + /* Get OPP-sharing information from "operating-points-v2" bindings */ + ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus); + if (ret) { + dev_err(cpu_dev, + "cpu%d: failed to get OPP-sharing information\n", cpu); + goto out_disable_sram_reg; + } + + ret = dev_pm_opp_of_cpumask_add_table(&info->cpus); + if (ret) { + dev_warn(cpu_dev, "cpu%d: no OPP table\n", cpu); + goto out_disable_sram_reg; + } + + ret = clk_prepare_enable(info->cpu_clk); + if (ret) + goto out_free_opp_table; + + ret = clk_prepare_enable(info->inter_clk); + if (ret) + goto out_disable_mux_clock; + + if (info->soc_data->ccifreq_supported) { + info->vproc_on_boot = regulator_get_voltage(info->proc_reg); + if (info->vproc_on_boot < 0) { + ret = info->vproc_on_boot; + dev_err(info->cpu_dev, + "invalid Vproc value: %d\n", info->vproc_on_boot); + goto out_disable_inter_clock; + } + } + + /* Search a safe voltage for intermediate frequency. */ + rate = clk_get_rate(info->inter_clk); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); + if (IS_ERR(opp)) { + dev_err(cpu_dev, "cpu%d: failed to get intermediate opp\n", cpu); + ret = PTR_ERR(opp); + goto out_disable_inter_clock; + } + info->intermediate_voltage = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + mutex_init(&info->reg_lock); + info->current_freq = clk_get_rate(info->cpu_clk); + + info->opp_cpu = cpu; + info->opp_nb.notifier_call = mtk_cpufreq_opp_notifier; + ret = dev_pm_opp_register_notifier(cpu_dev, &info->opp_nb); + if (ret) { + dev_err(cpu_dev, "cpu%d: failed to register opp notifier\n", cpu); + goto out_disable_inter_clock; + } + + /* + * If SRAM regulator is present, software "voltage tracking" is needed + * for this CPU power domain. + */ + info->need_voltage_tracking = (info->sram_reg != NULL); + + /* + * We assume min voltage is 0 and tracking target voltage using + * min_volt_shift for each iteration. + * The vtrack_max is 3 times of expeted iteration count. + */ + info->vtrack_max = 3 * DIV_ROUND_UP(max(info->soc_data->sram_max_volt, + info->soc_data->proc_max_volt), + info->soc_data->min_volt_shift); + + return 0; + +out_disable_inter_clock: + clk_disable_unprepare(info->inter_clk); + +out_disable_mux_clock: + clk_disable_unprepare(info->cpu_clk); + +out_free_opp_table: + dev_pm_opp_of_cpumask_remove_table(&info->cpus); + +out_disable_sram_reg: + if (info->sram_reg) + regulator_disable(info->sram_reg); + +out_free_sram_reg: + if (info->sram_reg) + regulator_put(info->sram_reg); + +out_disable_proc_reg: + regulator_disable(info->proc_reg); + +out_free_proc_reg: + regulator_put(info->proc_reg); + +out_free_inter_clock: + clk_put(info->inter_clk); + +out_free_mux_clock: + clk_put(info->cpu_clk); + + return ret; +} + +static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info) +{ + regulator_disable(info->proc_reg); + regulator_put(info->proc_reg); + if (info->sram_reg) { + regulator_disable(info->sram_reg); + regulator_put(info->sram_reg); + } + clk_disable_unprepare(info->cpu_clk); + clk_put(info->cpu_clk); + clk_disable_unprepare(info->inter_clk); + clk_put(info->inter_clk); + dev_pm_opp_of_cpumask_remove_table(&info->cpus); + dev_pm_opp_unregister_notifier(info->cpu_dev, &info->opp_nb); +} + +static int mtk_cpufreq_init(struct cpufreq_policy *policy) +{ + struct mtk_cpu_dvfs_info *info; + struct cpufreq_frequency_table *freq_table; + int ret; + + info = mtk_cpu_dvfs_info_lookup(policy->cpu); + if (!info) { + pr_err("dvfs info for cpu%d is not initialized.\n", + policy->cpu); + return -EINVAL; + } + + ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table); + if (ret) { + dev_err(info->cpu_dev, + "failed to init cpufreq table for cpu%d: %d\n", + policy->cpu, ret); + return ret; + } + + cpumask_copy(policy->cpus, &info->cpus); + policy->freq_table = freq_table; + policy->driver_data = info; + policy->clk = info->cpu_clk; + + return 0; +} + +static int mtk_cpufreq_exit(struct cpufreq_policy *policy) +{ + struct mtk_cpu_dvfs_info *info = policy->driver_data; + + dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table); + + return 0; +} + +static struct cpufreq_driver mtk_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = mtk_cpufreq_set_target, + .get = cpufreq_generic_get, + .init = mtk_cpufreq_init, + .exit = mtk_cpufreq_exit, + .register_em = cpufreq_register_em_with_opp, + .name = "mtk-cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int mtk_cpufreq_probe(struct platform_device *pdev) +{ + const struct mtk_cpufreq_platform_data *data; + struct mtk_cpu_dvfs_info *info, *tmp; + int cpu, ret; + + data = dev_get_platdata(&pdev->dev); + if (!data) { + dev_err(&pdev->dev, + "failed to get mtk cpufreq platform data\n"); + return -ENODEV; + } + + for_each_possible_cpu(cpu) { + info = mtk_cpu_dvfs_info_lookup(cpu); + if (info) + continue; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) { + ret = -ENOMEM; + goto release_dvfs_info_list; + } + + info->soc_data = data; + ret = mtk_cpu_dvfs_info_init(info, cpu); + if (ret) { + dev_err(&pdev->dev, + "failed to initialize dvfs info for cpu%d\n", + cpu); + goto release_dvfs_info_list; + } + + list_add(&info->list_head, &dvfs_info_list); + } + + ret = cpufreq_register_driver(&mtk_cpufreq_driver); + if (ret) { + dev_err(&pdev->dev, "failed to register mtk cpufreq driver\n"); + goto release_dvfs_info_list; + } + + return 0; + +release_dvfs_info_list: + list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) { + mtk_cpu_dvfs_info_release(info); + list_del(&info->list_head); + } + + return ret; +} + +static struct platform_driver mtk_cpufreq_platdrv = { + .driver = { + .name = "mtk-cpufreq", + }, + .probe = mtk_cpufreq_probe, +}; + +static const struct mtk_cpufreq_platform_data mt2701_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 200000, + .proc_max_volt = 1150000, + .sram_min_volt = 0, + .sram_max_volt = 1150000, + .ccifreq_supported = false, +}; + +static const struct mtk_cpufreq_platform_data mt7622_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 200000, + .proc_max_volt = 1350000, + .sram_min_volt = 0, + .sram_max_volt = 1350000, + .ccifreq_supported = false, +}; + +static const struct mtk_cpufreq_platform_data mt7623_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 200000, + .proc_max_volt = 1300000, + .ccifreq_supported = false, +}; + +static const struct mtk_cpufreq_platform_data mt8183_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 200000, + .proc_max_volt = 1150000, + .sram_min_volt = 0, + .sram_max_volt = 1150000, + .ccifreq_supported = true, +}; + +static const struct mtk_cpufreq_platform_data mt8186_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 250000, + .proc_max_volt = 1118750, + .sram_min_volt = 850000, + .sram_max_volt = 1118750, + .ccifreq_supported = true, +}; + +static const struct mtk_cpufreq_platform_data mt8516_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 200000, + .proc_max_volt = 1310000, + .sram_min_volt = 0, + .sram_max_volt = 1310000, + .ccifreq_supported = false, +}; + +/* List of machines supported by this driver */ +static const struct of_device_id mtk_cpufreq_machines[] __initconst = { + { .compatible = "mediatek,mt2701", .data = &mt2701_platform_data }, + { .compatible = "mediatek,mt2712", .data = &mt2701_platform_data }, + { .compatible = "mediatek,mt7622", .data = &mt7622_platform_data }, + { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data }, + { .compatible = "mediatek,mt8167", .data = &mt8516_platform_data }, + { .compatible = "mediatek,mt817x", .data = &mt2701_platform_data }, + { .compatible = "mediatek,mt8173", .data = &mt2701_platform_data }, + { .compatible = "mediatek,mt8176", .data = &mt2701_platform_data }, + { .compatible = "mediatek,mt8183", .data = &mt8183_platform_data }, + { .compatible = "mediatek,mt8186", .data = &mt8186_platform_data }, + { .compatible = "mediatek,mt8365", .data = &mt2701_platform_data }, + { .compatible = "mediatek,mt8516", .data = &mt8516_platform_data }, + { } +}; +MODULE_DEVICE_TABLE(of, mtk_cpufreq_machines); + +static int __init mtk_cpufreq_driver_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + const struct mtk_cpufreq_platform_data *data; + int err; + + np = of_find_node_by_path("/"); + if (!np) + return -ENODEV; + + match = of_match_node(mtk_cpufreq_machines, np); + of_node_put(np); + if (!match) { + pr_debug("Machine is not compatible with mtk-cpufreq\n"); + return -ENODEV; + } + data = match->data; + + err = platform_driver_register(&mtk_cpufreq_platdrv); + if (err) + return err; + + /* + * Since there's no place to hold device registration code and no + * device tree based way to match cpufreq driver yet, both the driver + * and the device registration codes are put here to handle defer + * probing. + */ + cpufreq_pdev = platform_device_register_data(NULL, "mtk-cpufreq", -1, + data, sizeof(*data)); + if (IS_ERR(cpufreq_pdev)) { + pr_err("failed to register mtk-cpufreq platform device\n"); + platform_driver_unregister(&mtk_cpufreq_platdrv); + return PTR_ERR(cpufreq_pdev); + } + + return 0; +} +module_init(mtk_cpufreq_driver_init) + +static void __exit mtk_cpufreq_driver_exit(void) +{ + platform_device_unregister(cpufreq_pdev); + platform_driver_unregister(&mtk_cpufreq_platdrv); +} +module_exit(mtk_cpufreq_driver_exit) + +MODULE_DESCRIPTION("MediaTek CPUFreq driver"); +MODULE_AUTHOR("Pi-Cheng Chen <pi-cheng.chen@linaro.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/mvebu-cpufreq.c b/drivers/cpufreq/mvebu-cpufreq.c new file mode 100644 index 000000000..7f3cfe668 --- /dev/null +++ b/drivers/cpufreq/mvebu-cpufreq.c @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CPUFreq support for Armada 370/XP platforms. + * + * Copyright (C) 2012-2016 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory Clement <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + */ + +#define pr_fmt(fmt) "mvebu-pmsu: " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/resource.h> + +static int __init armada_xp_pmsu_cpufreq_init(void) +{ + struct device_node *np; + struct resource res; + int ret, cpu; + + if (!of_machine_is_compatible("marvell,armadaxp")) + return 0; + + /* + * In order to have proper cpufreq handling, we need to ensure + * that the Device Tree description of the CPU clock includes + * the definition of the PMU DFS registers. If not, we do not + * register the clock notifier and the cpufreq driver. This + * piece of code is only for compatibility with old Device + * Trees. + */ + np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock"); + if (!np) + return 0; + + ret = of_address_to_resource(np, 1, &res); + if (ret) { + pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n"); + of_node_put(np); + return 0; + } + + of_node_put(np); + + /* + * For each CPU, this loop registers the operating points + * supported (which are the nominal CPU frequency and half of + * it), and registers the clock notifier that will take care + * of doing the PMSU part of a frequency transition. + */ + for_each_possible_cpu(cpu) { + struct device *cpu_dev; + struct clk *clk; + int ret; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("Cannot get CPU %d\n", cpu); + continue; + } + + clk = clk_get(cpu_dev, NULL); + if (IS_ERR(clk)) { + pr_err("Cannot get clock for CPU %d\n", cpu); + return PTR_ERR(clk); + } + + ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0); + if (ret) { + clk_put(clk); + return ret; + } + + ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0); + if (ret) { + dev_pm_opp_remove(cpu_dev, clk_get_rate(clk)); + clk_put(clk); + dev_err(cpu_dev, "Failed to register OPPs\n"); + return ret; + } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, + cpumask_of(cpu_dev->id)); + if (ret) + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); + clk_put(clk); + } + + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + return 0; +} +device_initcall(armada_xp_pmsu_cpufreq_init); diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c new file mode 100644 index 000000000..1b50df06c --- /dev/null +++ b/drivers/cpufreq/omap-cpufreq.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CPU frequency scaling for OMAP using OPP information + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King + * + * Copyright (C) 2007-2011 Texas Instruments, Inc. + * - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pm_opp.h> +#include <linux/cpu.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#include <asm/smp_plat.h> +#include <asm/cpu.h> + +/* OPP tolerance in percentage */ +#define OPP_TOLERANCE 4 + +static struct cpufreq_frequency_table *freq_table; +static atomic_t freq_table_users = ATOMIC_INIT(0); +static struct device *mpu_dev; +static struct regulator *mpu_reg; + +static int omap_target(struct cpufreq_policy *policy, unsigned int index) +{ + int r, ret; + struct dev_pm_opp *opp; + unsigned long freq, volt = 0, volt_old = 0, tol = 0; + unsigned int old_freq, new_freq; + + old_freq = policy->cur; + new_freq = freq_table[index].frequency; + + freq = new_freq * 1000; + ret = clk_round_rate(policy->clk, freq); + if (ret < 0) { + dev_warn(mpu_dev, + "CPUfreq: Cannot find matching frequency for %lu\n", + freq); + return ret; + } + freq = ret; + + if (mpu_reg) { + opp = dev_pm_opp_find_freq_ceil(mpu_dev, &freq); + if (IS_ERR(opp)) { + dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", + __func__, new_freq); + return -EINVAL; + } + volt = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + tol = volt * OPP_TOLERANCE / 100; + volt_old = regulator_get_voltage(mpu_reg); + } + + dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n", + old_freq / 1000, volt_old ? volt_old / 1000 : -1, + new_freq / 1000, volt ? volt / 1000 : -1); + + /* scaling up? scale voltage before frequency */ + if (mpu_reg && (new_freq > old_freq)) { + r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); + if (r < 0) { + dev_warn(mpu_dev, "%s: unable to scale voltage up.\n", + __func__); + return r; + } + } + + ret = clk_set_rate(policy->clk, new_freq * 1000); + + /* scaling down? scale voltage after frequency */ + if (mpu_reg && (new_freq < old_freq)) { + r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol); + if (r < 0) { + dev_warn(mpu_dev, "%s: unable to scale voltage down.\n", + __func__); + clk_set_rate(policy->clk, old_freq * 1000); + return r; + } + } + + return ret; +} + +static inline void freq_table_free(void) +{ + if (atomic_dec_and_test(&freq_table_users)) + dev_pm_opp_free_cpufreq_table(mpu_dev, &freq_table); +} + +static int omap_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + policy->clk = clk_get(NULL, "cpufreq_ck"); + if (IS_ERR(policy->clk)) + return PTR_ERR(policy->clk); + + if (!freq_table) { + result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table); + if (result) { + dev_err(mpu_dev, + "%s: cpu%d: failed creating freq table[%d]\n", + __func__, policy->cpu, result); + clk_put(policy->clk); + return result; + } + } + + atomic_inc_return(&freq_table_users); + + /* FIXME: what's the actual transition time? */ + cpufreq_generic_init(policy, freq_table, 300 * 1000); + + return 0; +} + +static int omap_cpu_exit(struct cpufreq_policy *policy) +{ + freq_table_free(); + clk_put(policy->clk); + return 0; +} + +static struct cpufreq_driver omap_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = omap_target, + .get = cpufreq_generic_get, + .init = omap_cpu_init, + .exit = omap_cpu_exit, + .register_em = cpufreq_register_em_with_opp, + .name = "omap", + .attr = cpufreq_generic_attr, +}; + +static int omap_cpufreq_probe(struct platform_device *pdev) +{ + mpu_dev = get_cpu_device(0); + if (!mpu_dev) { + pr_warn("%s: unable to get the MPU device\n", __func__); + return -EINVAL; + } + + mpu_reg = regulator_get(mpu_dev, "vcc"); + if (IS_ERR(mpu_reg)) { + pr_warn("%s: unable to get MPU regulator\n", __func__); + mpu_reg = NULL; + } else { + /* + * Ensure physical regulator is present. + * (e.g. could be dummy regulator.) + */ + if (regulator_get_voltage(mpu_reg) < 0) { + pr_warn("%s: physical regulator not present for MPU\n", + __func__); + regulator_put(mpu_reg); + mpu_reg = NULL; + } + } + + return cpufreq_register_driver(&omap_driver); +} + +static int omap_cpufreq_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&omap_driver); +} + +static struct platform_driver omap_cpufreq_platdrv = { + .driver = { + .name = "omap-cpufreq", + }, + .probe = omap_cpufreq_probe, + .remove = omap_cpufreq_remove, +}; +module_platform_driver(omap_cpufreq_platdrv); + +MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c new file mode 100644 index 000000000..ef0a3216a --- /dev/null +++ b/drivers/cpufreq/p4-clockmod.c @@ -0,0 +1,273 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Pentium 4/Xeon CPU on demand clock modulation/speed scaling + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * (C) 2002 Arjan van de Ven <arjanv@redhat.com> + * (C) 2002 Tora T. Engstad + * All Rights Reserved + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + * + * Date Errata Description + * 20020525 N44, O17 12.5% or 25% DC causes lockup + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/timex.h> + +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/timer.h> +#include <asm/cpu_device_id.h> + +#include "speedstep-lib.h" + +/* + * Duty Cycle (3bits), note DC_DISABLE is not specified in + * intel docs i just use it to mean disable + */ +enum { + DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, + DC_64PT, DC_75PT, DC_88PT, DC_DISABLE +}; + +#define DC_ENTRIES 8 + + +static int has_N44_O17_errata[NR_CPUS]; +static unsigned int stock_freq; +static struct cpufreq_driver p4clockmod_driver; +static unsigned int cpufreq_p4_get(unsigned int cpu); + +static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) +{ + u32 l, h; + + if ((newstate > DC_DISABLE) || (newstate == DC_RESV)) + return -EINVAL; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); + + if (l & 0x01) + pr_debug("CPU#%d currently thermal throttled\n", cpu); + + if (has_N44_O17_errata[cpu] && + (newstate == DC_25PT || newstate == DC_DFLT)) + newstate = DC_38PT; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); + if (newstate == DC_DISABLE) { + pr_debug("CPU#%d disabling modulation\n", cpu); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); + } else { + pr_debug("CPU#%d setting duty cycle to %d%%\n", + cpu, ((125 * newstate) / 10)); + /* bits 63 - 5 : reserved + * bit 4 : enable/disable + * bits 3-1 : duty cycle + * bit 0 : reserved + */ + l = (l & ~14); + l = l | (1<<4) | ((newstate & 0x7)<<1); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); + } + + return 0; +} + + +static struct cpufreq_frequency_table p4clockmod_table[] = { + {0, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {0, DC_DFLT, 0}, + {0, DC_25PT, 0}, + {0, DC_38PT, 0}, + {0, DC_50PT, 0}, + {0, DC_64PT, 0}, + {0, DC_75PT, 0}, + {0, DC_88PT, 0}, + {0, DC_DISABLE, 0}, + {0, DC_RESV, CPUFREQ_TABLE_END}, +}; + + +static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index) +{ + int i; + + /* run on each logical CPU, + * see section 13.15.3 of IA32 Intel Architecture Software + * Developer's Manual, Volume 3 + */ + for_each_cpu(i, policy->cpus) + cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data); + + return 0; +} + + +static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x06) { + if (cpu_has(c, X86_FEATURE_EST)) + pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n"); + switch (c->x86_model) { + case 0x0E: /* Core */ + case 0x0F: /* Core Duo */ + case 0x16: /* Celeron Core */ + case 0x1C: /* Atom */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); + case 0x0D: /* Pentium M (Dothan) */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + fallthrough; + case 0x09: /* Pentium M (Banias) */ + return speedstep_get_frequency(SPEEDSTEP_CPU_PM); + } + } + + if (c->x86 != 0xF) + return 0; + + /* on P-4s, the TSC runs with constant frequency independent whether + * throttling is active or not. */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { + pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n"); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); + } + + return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); +} + + + +static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(policy->cpu); + int cpuid = 0; + unsigned int i; + +#ifdef CONFIG_SMP + cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu)); +#endif + + /* Errata workaround */ + cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping; + switch (cpuid) { + case 0x0f07: + case 0x0f0a: + case 0x0f11: + case 0x0f12: + has_N44_O17_errata[policy->cpu] = 1; + pr_debug("has errata -- disabling low frequencies\n"); + } + + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && + c->x86_model < 2) { + /* switch to maximum frequency and measure result */ + cpufreq_p4_setdc(policy->cpu, DC_DISABLE); + recalibrate_cpu_khz(); + } + /* get max frequency */ + stock_freq = cpufreq_p4_get_frequency(c); + if (!stock_freq) + return -EINVAL; + + /* table init */ + for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { + if ((i < 2) && (has_N44_O17_errata[policy->cpu])) + p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + p4clockmod_table[i].frequency = (stock_freq * i)/8; + } + + /* cpuinfo and default policy values */ + + /* the transition latency is set to be 1 higher than the maximum + * transition latency of the ondemand governor */ + policy->cpuinfo.transition_latency = 10000001; + policy->freq_table = &p4clockmod_table[0]; + + return 0; +} + + +static unsigned int cpufreq_p4_get(unsigned int cpu) +{ + u32 l, h; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); + + if (l & 0x10) { + l = l >> 1; + l &= 0x7; + } else + l = DC_DISABLE; + + if (l != DC_DISABLE) + return stock_freq * l / 8; + + return stock_freq; +} + +static struct cpufreq_driver p4clockmod_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cpufreq_p4_target, + .init = cpufreq_p4_cpu_init, + .get = cpufreq_p4_get, + .name = "p4-clockmod", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id cpufreq_p4_id[] = { + X86_MATCH_VENDOR_FEATURE(INTEL, X86_FEATURE_ACC, NULL), + {} +}; + +/* + * Intentionally no MODULE_DEVICE_TABLE here: this driver should not + * be auto loaded. Please don't add one. + */ + +static int __init cpufreq_p4_init(void) +{ + int ret; + + /* + * THERM_CONTROL is architectural for IA32 now, so + * we can rely on the capability checks + */ + if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI)) + return -ENODEV; + + ret = cpufreq_register_driver(&p4clockmod_driver); + if (!ret) + pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); + + return ret; +} + + +static void __exit cpufreq_p4_exit(void) +{ + cpufreq_unregister_driver(&p4clockmod_driver); +} + + +MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); +MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); +MODULE_LICENSE("GPL"); + +late_initcall(cpufreq_p4_init); +module_exit(cpufreq_p4_exit); diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c new file mode 100644 index 000000000..039a66bbe --- /dev/null +++ b/drivers/cpufreq/pasemi-cpufreq.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Authors: Egor Martovetsky <egor@pasemi.com> + * Olof Johansson <olof@lixom.net> + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + */ + +#include <linux/cpufreq.h> +#include <linux/timer.h> +#include <linux/module.h> +#include <linux/of_address.h> + +#include <asm/hw_irq.h> +#include <asm/io.h> +#include <asm/time.h> +#include <asm/smp.h> + +#include <platforms/pasemi/pasemi.h> + +#define SDCASR_REG 0x0100 +#define SDCASR_REG_STRIDE 0x1000 +#define SDCPWR_CFGA0_REG 0x0100 +#define SDCPWR_PWST0_REG 0x0000 +#define SDCPWR_GIZTIME_REG 0x0440 + +/* SDCPWR_GIZTIME_REG fields */ +#define SDCPWR_GIZTIME_GR 0x80000000 +#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff + +/* Offset of ASR registers from SDC base */ +#define SDCASR_OFFSET 0x120000 + +static void __iomem *sdcpwr_mapbase; +static void __iomem *sdcasr_mapbase; + +/* Current astate, is used when waking up from power savings on + * one core, in case the other core has switched states during + * the idle time. + */ +static int current_astate; + +/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ +static struct cpufreq_frequency_table pas_freqs[] = { + {0, 0, 0}, + {0, 1, 0}, + {0, 2, 0}, + {0, 3, 0}, + {0, 4, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* + * hardware specific functions + */ + +static int get_astate_freq(int astate) +{ + u32 ret; + ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); + + return ret & 0x3f; +} + +static int get_cur_astate(int cpu) +{ + u32 ret; + + ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); + ret = (ret >> (cpu * 4)) & 0x7; + + return ret; +} + +static int get_gizmo_latency(void) +{ + u32 giztime, ret; + + giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); + + /* just provide the upper bound */ + if (giztime & SDCPWR_GIZTIME_GR) + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; + else + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; + + return ret; +} + +static void set_astate(int cpu, unsigned int astate) +{ + unsigned long flags; + + /* Return if called before init has run */ + if (unlikely(!sdcasr_mapbase)) + return; + + local_irq_save(flags); + + out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); + + local_irq_restore(flags); +} + +int check_astate(void) +{ + return get_cur_astate(hard_smp_processor_id()); +} + +void restore_astate(int cpu) +{ + set_astate(cpu, current_astate); +} + +/* + * cpufreq functions + */ + +static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos; + const u32 *max_freqp; + u32 max_freq; + int cur_astate, idx; + struct resource res; + struct device_node *cpu, *dn; + int err = -ENODEV; + + cpu = of_get_cpu_node(policy->cpu, NULL); + if (!cpu) + goto out; + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + of_node_put(cpu); + if (!max_freqp) { + err = -EINVAL; + goto out; + } + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-sdc"); + if (!dn) + goto out; + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out; + sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); + if (!sdcasr_mapbase) { + err = -EINVAL; + goto out; + } + + dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gizmo"); + if (!dn) { + err = -ENODEV; + goto out_unmap_sdcasr; + } + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out_unmap_sdcasr; + sdcpwr_mapbase = ioremap(res.start, 0x1000); + if (!sdcpwr_mapbase) { + err = -EINVAL; + goto out_unmap_sdcasr; + } + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + cpufreq_for_each_entry_idx(pos, pas_freqs, idx) { + pos->frequency = get_astate_freq(pos->driver_data) * 100000; + pr_debug("%d: %d\n", idx, pos->frequency); + } + + cur_astate = get_cur_astate(policy->cpu); + pr_debug("current astate is at %d\n",cur_astate); + + policy->cur = pas_freqs[cur_astate].frequency; + ppc_proc_freq = policy->cur * 1000ul; + + cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency()); + return 0; + +out_unmap_sdcasr: + iounmap(sdcasr_mapbase); +out: + return err; +} + +static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state >= SYSTEM_RUNNING) + return 0; + + if (sdcasr_mapbase) + iounmap(sdcasr_mapbase); + if (sdcpwr_mapbase) + iounmap(sdcpwr_mapbase); + + return 0; +} + +static int pas_cpufreq_target(struct cpufreq_policy *policy, + unsigned int pas_astate_new) +{ + int i; + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + pas_freqs[pas_astate_new].frequency, + pas_freqs[pas_astate_new].driver_data); + + current_astate = pas_astate_new; + + for_each_online_cpu(i) + set_astate(i, pas_astate_new); + + ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul; + return 0; +} + +static struct cpufreq_driver pas_cpufreq_driver = { + .name = "pas-cpufreq", + .flags = CPUFREQ_CONST_LOOPS, + .init = pas_cpufreq_cpu_init, + .exit = pas_cpufreq_cpu_exit, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pas_cpufreq_target, + .attr = cpufreq_generic_attr, +}; + +/* + * module init and destoy + */ + +static int __init pas_cpufreq_init(void) +{ + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) + return -ENODEV; + + return cpufreq_register_driver(&pas_cpufreq_driver); +} + +static void __exit pas_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pas_cpufreq_driver); +} + +module_init(pas_cpufreq_init); +module_exit(pas_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c new file mode 100644 index 000000000..9f3fc7a07 --- /dev/null +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -0,0 +1,632 @@ +/* + * pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface + * + * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com> + * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. + * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON + * INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/compiler.h> +#include <linux/slab.h> + +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> + +#include <acpi/processor.h> + +#define PCC_VERSION "1.10.00" +#define POLL_LOOPS 300 + +#define CMD_COMPLETE 0x1 +#define CMD_GET_FREQ 0x0 +#define CMD_SET_FREQ 0x1 + +#define BUF_SZ 4 + +struct pcc_register_resource { + u8 descriptor; + u16 length; + u8 space_id; + u8 bit_width; + u8 bit_offset; + u8 access_size; + u64 address; +} __attribute__ ((packed)); + +struct pcc_memory_resource { + u8 descriptor; + u16 length; + u8 space_id; + u8 resource_usage; + u8 type_specific; + u64 granularity; + u64 minimum; + u64 maximum; + u64 translation_offset; + u64 address_length; +} __attribute__ ((packed)); + +static struct cpufreq_driver pcc_cpufreq_driver; + +struct pcc_header { + u32 signature; + u16 length; + u8 major; + u8 minor; + u32 features; + u16 command; + u16 status; + u32 latency; + u32 minimum_time; + u32 maximum_time; + u32 nominal; + u32 throttled_frequency; + u32 minimum_frequency; +}; + +static void __iomem *pcch_virt_addr; +static struct pcc_header __iomem *pcch_hdr; + +static DEFINE_SPINLOCK(pcc_lock); + +static struct acpi_generic_address doorbell; + +static u64 doorbell_preserve; +static u64 doorbell_write; + +static u8 OSC_UUID[16] = {0x9F, 0x2C, 0x9B, 0x63, 0x91, 0x70, 0x1f, 0x49, + 0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46}; + +struct pcc_cpu { + u32 input_offset; + u32 output_offset; +}; + +static struct pcc_cpu __percpu *pcc_cpu_info; + +static int pcc_cpufreq_verify(struct cpufreq_policy_data *policy) +{ + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static inline void pcc_cmd(void) +{ + u64 doorbell_value; + int i; + + acpi_read(&doorbell_value, &doorbell); + acpi_write((doorbell_value & doorbell_preserve) | doorbell_write, + &doorbell); + + for (i = 0; i < POLL_LOOPS; i++) { + if (ioread16(&pcch_hdr->status) & CMD_COMPLETE) + break; + } +} + +static inline void pcc_clear_mapping(void) +{ + if (pcch_virt_addr) + iounmap(pcch_virt_addr); + pcch_virt_addr = NULL; +} + +static unsigned int pcc_get_freq(unsigned int cpu) +{ + struct pcc_cpu *pcc_cpu_data; + unsigned int curr_freq; + unsigned int freq_limit; + u16 status; + u32 input_buffer; + u32 output_buffer; + + spin_lock(&pcc_lock); + + pr_debug("get: get_freq for CPU %d\n", cpu); + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + input_buffer = 0x1; + iowrite32(input_buffer, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + iowrite16(CMD_GET_FREQ, &pcch_hdr->command); + + pcc_cmd(); + + output_buffer = + ioread32(pcch_virt_addr + pcc_cpu_data->output_offset); + + /* Clear the input buffer - we are done with the current command */ + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + + status = ioread16(&pcch_hdr->status); + if (status != CMD_COMPLETE) { + pr_debug("get: FAILED: for CPU %d, status is %d\n", + cpu, status); + goto cmd_incomplete; + } + iowrite16(0, &pcch_hdr->status); + curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff)) + / 100) * 1000); + + pr_debug("get: SUCCESS: (virtual) output_offset for cpu %d is " + "0x%p, contains a value of: 0x%x. Speed is: %d MHz\n", + cpu, (pcch_virt_addr + pcc_cpu_data->output_offset), + output_buffer, curr_freq); + + freq_limit = (output_buffer >> 8) & 0xff; + if (freq_limit != 0xff) { + pr_debug("get: frequency for cpu %d is being temporarily" + " capped at %d\n", cpu, curr_freq); + } + + spin_unlock(&pcc_lock); + return curr_freq; + +cmd_incomplete: + iowrite16(0, &pcch_hdr->status); + spin_unlock(&pcc_lock); + return 0; +} + +static int pcc_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct pcc_cpu *pcc_cpu_data; + struct cpufreq_freqs freqs; + u16 status; + u32 input_buffer; + int cpu; + + cpu = policy->cpu; + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + pr_debug("target: CPU %d should go to target freq: %d " + "(virtual) input_offset is 0x%p\n", + cpu, target_freq, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + + freqs.old = policy->cur; + freqs.new = target_freq; + cpufreq_freq_transition_begin(policy, &freqs); + spin_lock(&pcc_lock); + + input_buffer = 0x1 | (((target_freq * 100) + / (ioread32(&pcch_hdr->nominal) * 1000)) << 8); + iowrite32(input_buffer, + (pcch_virt_addr + pcc_cpu_data->input_offset)); + iowrite16(CMD_SET_FREQ, &pcch_hdr->command); + + pcc_cmd(); + + /* Clear the input buffer - we are done with the current command */ + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + + status = ioread16(&pcch_hdr->status); + iowrite16(0, &pcch_hdr->status); + + cpufreq_freq_transition_end(policy, &freqs, status != CMD_COMPLETE); + spin_unlock(&pcc_lock); + + if (status != CMD_COMPLETE) { + pr_debug("target: FAILED for cpu %d, with status: 0x%x\n", + cpu, status); + return -EINVAL; + } + + pr_debug("target: was SUCCESSFUL for cpu %d\n", cpu); + + return 0; +} + +static int pcc_get_offset(int cpu) +{ + acpi_status status; + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *pccp, *offset; + struct pcc_cpu *pcc_cpu_data; + struct acpi_processor *pr; + int ret = 0; + + pr = per_cpu(processors, cpu); + pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + + if (!pr) + return -ENODEV; + + status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + pccp = buffer.pointer; + if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) { + ret = -ENODEV; + goto out_free; + } + + offset = &(pccp->package.elements[0]); + if (!offset || offset->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto out_free; + } + + pcc_cpu_data->input_offset = offset->integer.value; + + offset = &(pccp->package.elements[1]); + if (!offset || offset->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto out_free; + } + + pcc_cpu_data->output_offset = offset->integer.value; + + memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); + memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ); + + pr_debug("pcc_get_offset: for CPU %d: pcc_cpu_data " + "input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n", + cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset); +out_free: + kfree(buffer.pointer); + return ret; +} + +static int __init pcc_cpufreq_do_osc(acpi_handle *handle) +{ + acpi_status status; + struct acpi_object_list input; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object in_params[4]; + union acpi_object *out_obj; + u32 capabilities[2]; + u32 errors; + u32 supported; + int ret = 0; + + input.count = 4; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = 16; + in_params[0].buffer.pointer = OSC_UUID; + in_params[1].type = ACPI_TYPE_INTEGER; + in_params[1].integer.value = 1; + in_params[2].type = ACPI_TYPE_INTEGER; + in_params[2].integer.value = 2; + in_params[3].type = ACPI_TYPE_BUFFER; + in_params[3].buffer.length = 8; + in_params[3].buffer.pointer = (u8 *)&capabilities; + + capabilities[0] = OSC_QUERY_ENABLE; + capabilities[1] = 0x1; + + status = acpi_evaluate_object(*handle, "_OSC", &input, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!output.length) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + ret = -ENODEV; + goto out_free; + } + + supported = *((u32 *)(out_obj->buffer.pointer + 4)); + if (!(supported & 0x1)) { + ret = -ENODEV; + goto out_free; + } + + kfree(output.pointer); + capabilities[0] = 0x0; + capabilities[1] = 0x1; + + status = acpi_evaluate_object(*handle, "_OSC", &input, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!output.length) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + ret = -ENODEV; + goto out_free; + } + + supported = *((u32 *)(out_obj->buffer.pointer + 4)); + if (!(supported & 0x1)) { + ret = -ENODEV; + goto out_free; + } + +out_free: + kfree(output.pointer); + return ret; +} + +static int __init pcc_cpufreq_probe(void) +{ + acpi_status status; + struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; + struct pcc_memory_resource *mem_resource; + struct pcc_register_resource *reg_resource; + union acpi_object *out_obj, *member; + acpi_handle handle, osc_handle; + int ret = 0; + + status = acpi_get_handle(NULL, "\\_SB", &handle); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (!acpi_has_method(handle, "PCCH")) + return -ENODEV; + + status = acpi_get_handle(handle, "_OSC", &osc_handle); + if (ACPI_SUCCESS(status)) { + ret = pcc_cpufreq_do_osc(&osc_handle); + if (ret) + pr_debug("probe: _OSC evaluation did not succeed\n"); + /* Firmware's use of _OSC is optional */ + ret = 0; + } + + status = acpi_evaluate_object(handle, "PCCH", NULL, &output); + if (ACPI_FAILURE(status)) + return -ENODEV; + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_PACKAGE) { + ret = -ENODEV; + goto out_free; + } + + member = &out_obj->package.elements[0]; + if (member->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } + + mem_resource = (struct pcc_memory_resource *)member->buffer.pointer; + + pr_debug("probe: mem_resource descriptor: 0x%x," + " length: %d, space_id: %d, resource_usage: %d," + " type_specific: %d, granularity: 0x%llx," + " minimum: 0x%llx, maximum: 0x%llx," + " translation_offset: 0x%llx, address_length: 0x%llx\n", + mem_resource->descriptor, mem_resource->length, + mem_resource->space_id, mem_resource->resource_usage, + mem_resource->type_specific, mem_resource->granularity, + mem_resource->minimum, mem_resource->maximum, + mem_resource->translation_offset, + mem_resource->address_length); + + if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) { + ret = -ENODEV; + goto out_free; + } + + pcch_virt_addr = ioremap(mem_resource->minimum, + mem_resource->address_length); + if (pcch_virt_addr == NULL) { + pr_debug("probe: could not map shared mem region\n"); + ret = -ENOMEM; + goto out_free; + } + pcch_hdr = pcch_virt_addr; + + pr_debug("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr); + pr_debug("probe: PCCH header is at physical address: 0x%llx," + " signature: 0x%x, length: %d bytes, major: %d, minor: %d," + " supported features: 0x%x, command field: 0x%x," + " status field: 0x%x, nominal latency: %d us\n", + mem_resource->minimum, ioread32(&pcch_hdr->signature), + ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major), + ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features), + ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status), + ioread32(&pcch_hdr->latency)); + + pr_debug("probe: min time between commands: %d us," + " max time between commands: %d us," + " nominal CPU frequency: %d MHz," + " minimum CPU frequency: %d MHz," + " minimum CPU frequency without throttling: %d MHz\n", + ioread32(&pcch_hdr->minimum_time), + ioread32(&pcch_hdr->maximum_time), + ioread32(&pcch_hdr->nominal), + ioread32(&pcch_hdr->throttled_frequency), + ioread32(&pcch_hdr->minimum_frequency)); + + member = &out_obj->package.elements[1]; + if (member->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto pcch_free; + } + + reg_resource = (struct pcc_register_resource *)member->buffer.pointer; + + doorbell.space_id = reg_resource->space_id; + doorbell.bit_width = reg_resource->bit_width; + doorbell.bit_offset = reg_resource->bit_offset; + doorbell.access_width = 4; + doorbell.address = reg_resource->address; + + pr_debug("probe: doorbell: space_id is %d, bit_width is %d, " + "bit_offset is %d, access_width is %d, address is 0x%llx\n", + doorbell.space_id, doorbell.bit_width, doorbell.bit_offset, + doorbell.access_width, reg_resource->address); + + member = &out_obj->package.elements[2]; + if (member->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto pcch_free; + } + + doorbell_preserve = member->integer.value; + + member = &out_obj->package.elements[3]; + if (member->type != ACPI_TYPE_INTEGER) { + ret = -ENODEV; + goto pcch_free; + } + + doorbell_write = member->integer.value; + + pr_debug("probe: doorbell_preserve: 0x%llx," + " doorbell_write: 0x%llx\n", + doorbell_preserve, doorbell_write); + + pcc_cpu_info = alloc_percpu(struct pcc_cpu); + if (!pcc_cpu_info) { + ret = -ENOMEM; + goto pcch_free; + } + + printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency" + " limits: %d MHz, %d MHz\n", PCC_VERSION, + ioread32(&pcch_hdr->minimum_frequency), + ioread32(&pcch_hdr->nominal)); + kfree(output.pointer); + return ret; +pcch_free: + pcc_clear_mapping(); +out_free: + kfree(output.pointer); + return ret; +} + +static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + unsigned int result = 0; + + if (!pcch_virt_addr) { + result = -1; + goto out; + } + + result = pcc_get_offset(cpu); + if (result) { + pr_debug("init: PCCP evaluation failed\n"); + goto out; + } + + policy->max = policy->cpuinfo.max_freq = + ioread32(&pcch_hdr->nominal) * 1000; + policy->min = policy->cpuinfo.min_freq = + ioread32(&pcch_hdr->minimum_frequency) * 1000; + + pr_debug("init: policy->max is %d, policy->min is %d\n", + policy->max, policy->min); +out: + return result; +} + +static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver pcc_cpufreq_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .get = pcc_get_freq, + .verify = pcc_cpufreq_verify, + .target = pcc_cpufreq_target, + .init = pcc_cpufreq_cpu_init, + .exit = pcc_cpufreq_cpu_exit, + .name = "pcc-cpufreq", +}; + +static int __init pcc_cpufreq_init(void) +{ + int ret; + + /* Skip initialization if another cpufreq driver is there. */ + if (cpufreq_get_current_driver()) + return -EEXIST; + + if (acpi_disabled) + return -ENODEV; + + ret = pcc_cpufreq_probe(); + if (ret) { + pr_debug("pcc_cpufreq_init: PCCH evaluation failed\n"); + return ret; + } + + if (num_present_cpus() > 4) { + pcc_cpufreq_driver.flags |= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING; + pr_err("%s: Too many CPUs, dynamic performance scaling disabled\n", + __func__); + pr_err("%s: Try to enable another scaling driver through BIOS settings\n", + __func__); + pr_err("%s: and complain to the system vendor\n", __func__); + } + + ret = cpufreq_register_driver(&pcc_cpufreq_driver); + + return ret; +} + +static void __exit pcc_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pcc_cpufreq_driver); + + pcc_clear_mapping(); + + free_percpu(pcc_cpu_info); +} + +static const struct acpi_device_id __maybe_unused processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, }, + {ACPI_PROCESSOR_DEVICE_HID, }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, processor_device_ids); + +MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar"); +MODULE_VERSION(PCC_VERSION); +MODULE_DESCRIPTION("Processor Clocking Control interface driver"); +MODULE_LICENSE("GPL"); + +late_initcall(pcc_cpufreq_init); +module_exit(pcc_cpufreq_exit); diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c new file mode 100644 index 000000000..4b8ee2014 --- /dev/null +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -0,0 +1,693 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/hardirq.h> +#include <linux/of_device.h> + +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/pmac_feature.h> +#include <asm/mmu_context.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/mpic.h> +#include <asm/keylargo.h> +#include <asm/switch_to.h> + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; +static unsigned long transition_latency; + +/* + * Different models uses different mechanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {0, CPUFREQ_HIGH, 0}, + {0, CPUFREQ_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_PPC_BOOK3S_32 + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_PPC_BOOK3S_32 + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occurring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + switch_mmu_context(NULL, current->active_mm, NULL); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* + * Restore decrementer; we'll take a decrementer interrupt + * as soon as interrupts are re-enabled and the generic + * clockevents code will reprogram it with the right value. + */ + set_dec(1); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode) +{ + unsigned long l3cr; + static unsigned long prev_l3cr; + + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int index) +{ + int rc; + + rc = do_set_cpu_speed(policy, index); + + ppc_proc_freq = cur_freq * 1000ul; + return rc; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency); + return 0; +} + +static u32 read_gpio(struct device_node *np) +{ + const u32 *reg = of_get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(policy, CPUFREQ_HIGH); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(policy, sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH); + + ppc_proc_freq = cur_freq * 1000ul; + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .attr = cpufreq_generic_attr, + .name = "powermac", +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + const u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + of_node_put(volt_gpio_np); + of_node_put(freq_gpio_np); + of_node_put(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + const u32 *freqs, *ratio; + + freqs = of_get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + pr_err("bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", + NULL); + if (ratio == NULL) { + pr_err("processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = of_get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = of_get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + of_node_put(volt_gpio_np); + if (!voltage_gpio){ + pr_err("missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr; + const u32 *value; + + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = of_get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + of_node_put(volt_gpio_np); + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + const u32 *value; + + if (strstr(boot_command_line, "nocpufreq")) + return 0; + + /* Get first CPU node */ + cpunode = of_cpu_device_node_get(0); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = of_get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + + /* Check for 7447A based MacRISC3 */ + if (of_machine_is_compatible("MacRISC3") && + of_get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + + /* Allow dynamic switching */ + transition_latency = 8000000; + pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING; + /* Check for other MacRISC3 machines */ + } else if (of_machine_is_compatible("PowerBook3,4") || + of_machine_is_compatible("PowerBook3,5") || + of_machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (of_machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 550 */ + else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + hi_freq = cur_freq; + low_freq = 500000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (of_machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + of_node_put(cpunode); + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; + + pr_info("Registering PowerMac CPU frequency driver\n"); + pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c new file mode 100644 index 000000000..ba9c31d98 --- /dev/null +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -0,0 +1,674 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#undef DEBUG + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <linux/of_device.h> + +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/smu.h> +#include <asm/pmac_pfunc.h> + +#define DBG(fmt...) pr_debug(fmt) + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {0, CPUFREQ_HIGH, 0}, + {0, CPUFREQ_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retrieved from the device-tree + */ +static int g5_pmode_cur; + +static void (*g5_switch_volt)(int speed_mode); +static int (*g5_switch_freq)(int speed_mode); +static int (*g5_query_freq)(void); + +static unsigned long transition_latency; + +#ifdef CONFIG_PMAC_SMU + +static const u32 *g5_pmode_data; +static int g5_pmode_max; + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* + * SMU based voltage switching for Neo2 platforms + */ + +static void g5_smu_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION_ONSTACK(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +/* + * Platform function based voltage/vdnap switching for Neo2 + */ + +static struct pmf_function *pfunc_set_vdnap0; +static struct pmf_function *pfunc_vdnap0_complete; + +static void g5_vdnap_switch_volt(int speed_mode) +{ + struct pmf_args args; + u32 slew, done = 0; + unsigned long timeout; + + slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; + args.count = 1; + args.u[0].p = &slew; + + pmf_call_one(pfunc_set_vdnap0, &args); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_vdnap0_complete, &args); + if (done) + break; + usleep_range(1000, 1000); + } + if (done == 0) + pr_warn("Timeout in clock slewing !\n"); +} + + +/* + * SCOM based frequency switching for 970FX rev3 + */ +static int g5_scom_switch_freq(int speed_mode) +{ + unsigned long flags; + int to; + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + local_irq_save(flags); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + local_irq_restore(flags); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_scom_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* + * Platform function based voltage switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu0_volt_high; +static struct pmf_function *pfunc_cpu0_volt_low; +static struct pmf_function *pfunc_cpu1_volt_high; +static struct pmf_function *pfunc_cpu1_volt_low; + +static void g5_pfunc_switch_volt(int speed_mode) +{ + if (speed_mode == CPUFREQ_HIGH) { + if (pfunc_cpu0_volt_high) + pmf_call_one(pfunc_cpu0_volt_high, NULL); + if (pfunc_cpu1_volt_high) + pmf_call_one(pfunc_cpu1_volt_high, NULL); + } else { + if (pfunc_cpu0_volt_low) + pmf_call_one(pfunc_cpu0_volt_low, NULL); + if (pfunc_cpu1_volt_low) + pmf_call_one(pfunc_cpu1_volt_low, NULL); + } + usleep_range(10000, 10000); /* should be faster , to fix */ +} + +/* + * Platform function based frequency switching for PowerMac7,2 & 7,3 + */ + +static struct pmf_function *pfunc_cpu_setfreq_high; +static struct pmf_function *pfunc_cpu_setfreq_low; +static struct pmf_function *pfunc_cpu_getfreq; +static struct pmf_function *pfunc_slewing_done; + +static int g5_pfunc_switch_freq(int speed_mode) +{ + struct pmf_args args; + u32 done = 0; + unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Do it */ + if (speed_mode == CPUFREQ_HIGH) + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); + else + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + pr_warn("pfunc switch error %d\n", rc); + + /* It's an irq GPIO so we should be able to just block here, + * I'll do that later after I've properly tested the IRQ code for + * platform functions + */ + timeout = jiffies + HZ/10; + while(!time_after(jiffies, timeout)) { + args.count = 1; + args.u[0].p = &done; + pmf_call_one(pfunc_slewing_done, &args); + if (done) + break; + usleep_range(500, 500); + } + if (done == 0) + pr_warn("Timeout in clock slewing !\n"); + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + return 0; +} + +static int g5_pfunc_query_freq(void) +{ + struct pmf_args args; + u32 val = 0; + + args.count = 1; + args.u[0].p = &val; + pmf_call_one(pfunc_cpu_getfreq, &args); + return val ? CPUFREQ_HIGH : CPUFREQ_LOW; +} + + +/* + * Common interface to the cpufreq core + */ + +static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) +{ + return g5_switch_freq(index); +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + cpufreq_generic_init(policy, g5_cpu_freqs, transition_latency); + return 0; +} + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = cpufreq_generic_attr, +}; + + +#ifdef CONFIG_PMAC_SMU + +static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) +{ + unsigned int psize, ssize; + unsigned long max_freq; + char *freq_method, *volt_method; + const u32 *valp; + u32 pvr_hi; + int use_volts_vdnap = 0; + int use_volts_smu = 0; + int rc = -ENODEV; + + /* Check supported platforms */ + if (of_machine_is_compatible("PowerMac8,1") || + of_machine_is_compatible("PowerMac8,2") || + of_machine_is_compatible("PowerMac9,1") || + of_machine_is_compatible("PowerMac12,1")) + use_volts_smu = 1; + else if (of_machine_is_compatible("PowerMac11,2")) + use_volts_vdnap = 1; + else + return -ENODEV; + + /* Check 970FX for now */ + valp = of_get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + pvr_hi = (*valp) >> 16; + if (pvr_hi != 0x3c && pvr_hi != 0x44) { + pr_err("Unsupported CPU version\n"); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + if (use_volts_smu) { + const struct smu_sdbp_header *shdr; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - sizeof(*shdr); + g5_fvt_count = ssize / sizeof(*g5_fvt_table); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + g5_switch_volt = g5_smu_switch_volt; + volt_method = "SMU"; + } else if (use_volts_vdnap) { + struct device_node *root; + + root = of_find_node_by_path("/"); + if (root == NULL) { + pr_err("Can't find root of device tree\n"); + goto bail_noprops; + } + pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); + pfunc_vdnap0_complete = + pmf_find_function(root, "slewing-done"); + of_node_put(root); + if (pfunc_set_vdnap0 == NULL || + pfunc_vdnap0_complete == NULL) { + pr_err("Can't find required platform function\n"); + goto bail_noprops; + } + + g5_switch_volt = g5_vdnap_switch_volt; + volt_method = "GPIO"; + } else { + g5_switch_volt = g5_dummy_switch_volt; + volt_method = "none"; + } + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Set callbacks */ + transition_latency = 12000; + g5_switch_freq = g5_scom_switch_freq; + g5_query_freq = g5_scom_query_freq; + freq_method = "SCOM"; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + pr_info("Registering G5 CPU frequency driver\n"); + pr_info("Frequency method: %s, Voltage method: %s\n", + freq_method, volt_method); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +#endif /* CONFIG_PMAC_SMU */ + + +static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) +{ + struct device_node *cpuid = NULL, *hwclock = NULL; + const u8 *eeprom = NULL; + const u32 *valp; + u64 max_freq, min_freq, ih, il; + int has_volt = 1, rc = 0; + + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + + /* Lookup the cpuid eeprom node */ + cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); + if (cpuid != NULL) + eeprom = of_get_property(cpuid, "cpuid", NULL); + if (eeprom == NULL) { + pr_err("Can't find cpuid EEPROM !\n"); + rc = -ENODEV; + goto bail; + } + + /* Lookup the i2c hwclock */ + for_each_node_by_name(hwclock, "i2c-hwclock") { + const char *loc = of_get_property(hwclock, + "hwctrl-location", NULL); + if (loc == NULL) + continue; + if (strcmp(loc, "CPU CLOCK")) + continue; + if (!of_get_property(hwclock, "platform-get-frequency", NULL)) + continue; + break; + } + if (hwclock == NULL) { + pr_err("Can't find i2c clock chip !\n"); + rc = -ENODEV; + goto bail; + } + + DBG("cpufreq: i2c clock chip found: %pOF\n", hwclock); + + /* Now get all the platform functions */ + pfunc_cpu_getfreq = + pmf_find_function(hwclock, "get-frequency"); + pfunc_cpu_setfreq_high = + pmf_find_function(hwclock, "set-frequency-high"); + pfunc_cpu_setfreq_low = + pmf_find_function(hwclock, "set-frequency-low"); + pfunc_slewing_done = + pmf_find_function(hwclock, "slewing-done"); + pfunc_cpu0_volt_high = + pmf_find_function(hwclock, "set-voltage-high-0"); + pfunc_cpu0_volt_low = + pmf_find_function(hwclock, "set-voltage-low-0"); + pfunc_cpu1_volt_high = + pmf_find_function(hwclock, "set-voltage-high-1"); + pfunc_cpu1_volt_low = + pmf_find_function(hwclock, "set-voltage-low-1"); + + /* Check we have minimum requirements */ + if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || + pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { + pr_err("Can't find platform functions !\n"); + rc = -ENODEV; + goto bail; + } + + /* Check that we have complete sets */ + if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; + has_volt = 0; + } + if (!has_volt || + pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; + } + + /* Note: The device tree also contains a "platform-set-values" + * function for which I haven't quite figured out the usage. It + * might have to be called on init and/or wakeup, I'm not too sure + * but things seem to work fine without it so far ... + */ + + /* Get max frequency from device-tree */ + valp = of_get_property(cpunode, "clock-frequency", NULL); + if (!valp) { + pr_err("Can't find CPU frequency !\n"); + rc = -ENODEV; + goto bail; + } + + max_freq = (*valp)/1000; + + /* Now calculate reduced frequency by using the cpuid input freq + * ratio. This requires 64 bits math unless we are willing to lose + * some precision + */ + ih = *((u32 *)(eeprom + 0x10)); + il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + pr_warn("No low frequency mode available on this model !\n"); + rc = -ENODEV; + goto bail; + } + + min_freq = 0; + if (ih != 0 && il != 0) + min_freq = (max_freq * il) / ih; + + /* Sanity check */ + if (min_freq >= max_freq || min_freq < 1000) { + pr_err("Can't calculate low frequency !\n"); + rc = -ENXIO; + goto bail; + } + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = min_freq; + + /* Based on a measurement on Xserve G5, rounded up. */ + transition_latency = 10 * NSEC_PER_MSEC; + + /* Set callbacks */ + g5_switch_volt = g5_pfunc_switch_volt; + g5_switch_freq = g5_pfunc_switch_freq; + g5_query_freq = g5_pfunc_query_freq; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_volt(CPUFREQ_HIGH); + msleep(10); + g5_pmode_cur = -1; + g5_switch_freq(g5_query_freq()); + + pr_info("Registering G5 CPU frequency driver\n"); + pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n", + has_volt ? "i2c/pfunc" : "none"); + pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + bail: + if (rc != 0) { + pmf_put_function(pfunc_cpu_getfreq); + pmf_put_function(pfunc_cpu_setfreq_high); + pmf_put_function(pfunc_cpu_setfreq_low); + pmf_put_function(pfunc_slewing_done); + pmf_put_function(pfunc_cpu0_volt_high); + pmf_put_function(pfunc_cpu0_volt_low); + pmf_put_function(pfunc_cpu1_volt_high); + pmf_put_function(pfunc_cpu1_volt_low); + } + of_node_put(hwclock); + of_node_put(cpuid); + of_node_put(cpunode); + + return rc; +} + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpunode; + int rc = 0; + + /* Get first CPU node */ + cpunode = of_cpu_device_node_get(0); + if (cpunode == NULL) { + pr_err("Can't find any CPU node\n"); + return -ENODEV; + } + + if (of_machine_is_compatible("PowerMac7,2") || + of_machine_is_compatible("PowerMac7,3") || + of_machine_is_compatible("RackMac3,1")) + rc = g5_pm72_cpufreq_init(cpunode); +#ifdef CONFIG_PMAC_SMU + else + rc = g5_neo2_cpufreq_init(cpunode); +#endif /* CONFIG_PMAC_SMU */ + + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c new file mode 100644 index 000000000..41eefef95 --- /dev/null +++ b/drivers/cpufreq/powernow-k6.c @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, + * Dominik Brodowski. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/timex.h> +#include <linux/io.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> + +#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long + as it is unused */ + +static unsigned int busfreq; /* FSB, in 10 kHz */ +static unsigned int max_multiplier; + +static unsigned int param_busfreq = 0; +static unsigned int param_max_multiplier = 0; + +module_param_named(max_multiplier, param_max_multiplier, uint, S_IRUGO); +MODULE_PARM_DESC(max_multiplier, "Maximum multiplier (allowed values: 20 30 35 40 45 50 55 60)"); + +module_param_named(bus_frequency, param_busfreq, uint, S_IRUGO); +MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz"); + +/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */ +static struct cpufreq_frequency_table clock_ratio[] = { + {0, 60, /* 110 -> 6.0x */ 0}, + {0, 55, /* 011 -> 5.5x */ 0}, + {0, 50, /* 001 -> 5.0x */ 0}, + {0, 45, /* 000 -> 4.5x */ 0}, + {0, 40, /* 010 -> 4.0x */ 0}, + {0, 35, /* 111 -> 3.5x */ 0}, + {0, 30, /* 101 -> 3.0x */ 0}, + {0, 20, /* 100 -> 2.0x */ 0}, + {0, 0, CPUFREQ_TABLE_END} +}; + +static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 }; +static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 }; + +static const struct { + unsigned freq; + unsigned mult; +} usual_frequency_table[] = { + { 350000, 35 }, // 100 * 3.5 + { 400000, 40 }, // 100 * 4 + { 450000, 45 }, // 100 * 4.5 + { 475000, 50 }, // 95 * 5 + { 500000, 50 }, // 100 * 5 + { 506250, 45 }, // 112.5 * 4.5 + { 533500, 55 }, // 97 * 5.5 + { 550000, 55 }, // 100 * 5.5 + { 562500, 50 }, // 112.5 * 5 + { 570000, 60 }, // 95 * 6 + { 600000, 60 }, // 100 * 6 + { 618750, 55 }, // 112.5 * 5.5 + { 660000, 55 }, // 120 * 5.5 + { 675000, 60 }, // 112.5 * 6 + { 720000, 60 }, // 120 * 6 +}; + +#define FREQ_RANGE 3000 + +/** + * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier + * + * Returns the current setting of the frequency multiplier. Core clock + * speed is frequency of the Front-Side Bus multiplied with this value. + */ +static int powernow_k6_get_cpu_multiplier(void) +{ + unsigned long invalue = 0; + u32 msrval; + + local_irq_disable(); + + msrval = POWERNOW_IOPORT + 0x1; + wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ + invalue = inl(POWERNOW_IOPORT + 0x8); + msrval = POWERNOW_IOPORT + 0x0; + wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ + + local_irq_enable(); + + return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data; +} + +static void powernow_k6_set_cpu_multiplier(unsigned int best_i) +{ + unsigned long outvalue, invalue; + unsigned long msrval; + unsigned long cr0; + + /* we now need to transform best_i to the BVC format, see AMD#23446 */ + + /* + * The processor doesn't respond to inquiry cycles while changing the + * frequency, so we must disable cache. + */ + local_irq_disable(); + cr0 = read_cr0(); + write_cr0(cr0 | X86_CR0_CD); + wbinvd(); + + outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5); + + msrval = POWERNOW_IOPORT + 0x1; + wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ + invalue = inl(POWERNOW_IOPORT + 0x8); + invalue = invalue & 0x1f; + outvalue = outvalue | invalue; + outl(outvalue, (POWERNOW_IOPORT + 0x8)); + msrval = POWERNOW_IOPORT + 0x0; + wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ + + write_cr0(cr0); + local_irq_enable(); +} + +/** + * powernow_k6_target - set the PowerNow! multiplier + * @best_i: clock_ratio[best_i] is the target multiplier + * + * Tries to change the PowerNow! multiplier + */ +static int powernow_k6_target(struct cpufreq_policy *policy, + unsigned int best_i) +{ + + if (clock_ratio[best_i].driver_data > max_multiplier) { + pr_err("invalid target frequency\n"); + return -EINVAL; + } + + powernow_k6_set_cpu_multiplier(best_i); + + return 0; +} + +static int powernow_k6_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos; + unsigned int i, f; + unsigned khz; + + if (policy->cpu != 0) + return -ENODEV; + + max_multiplier = 0; + khz = cpu_khz; + for (i = 0; i < ARRAY_SIZE(usual_frequency_table); i++) { + if (khz >= usual_frequency_table[i].freq - FREQ_RANGE && + khz <= usual_frequency_table[i].freq + FREQ_RANGE) { + khz = usual_frequency_table[i].freq; + max_multiplier = usual_frequency_table[i].mult; + break; + } + } + if (param_max_multiplier) { + cpufreq_for_each_entry(pos, clock_ratio) + if (pos->driver_data == param_max_multiplier) { + max_multiplier = param_max_multiplier; + goto have_max_multiplier; + } + pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n"); + return -EINVAL; + } + + if (!max_multiplier) { + pr_warn("unknown frequency %u, cannot determine current multiplier\n", + khz); + pr_warn("use module parameters max_multiplier and bus_frequency\n"); + return -EOPNOTSUPP; + } + +have_max_multiplier: + param_max_multiplier = max_multiplier; + + if (param_busfreq) { + if (param_busfreq >= 50000 && param_busfreq <= 150000) { + busfreq = param_busfreq / 10; + goto have_busfreq; + } + pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n"); + return -EINVAL; + } + + busfreq = khz / max_multiplier; +have_busfreq: + param_busfreq = busfreq * 10; + + /* table init */ + cpufreq_for_each_entry(pos, clock_ratio) { + f = pos->driver_data; + if (f > max_multiplier) + pos->frequency = CPUFREQ_ENTRY_INVALID; + else + pos->frequency = busfreq * f; + } + + /* cpuinfo and default policy values */ + policy->cpuinfo.transition_latency = 500000; + policy->freq_table = clock_ratio; + + return 0; +} + + +static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int i; + + for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + if (clock_ratio[i].driver_data == max_multiplier) { + struct cpufreq_freqs freqs; + + freqs.old = policy->cur; + freqs.new = clock_ratio[i].frequency; + freqs.flags = 0; + + cpufreq_freq_transition_begin(policy, &freqs); + powernow_k6_target(policy, i); + cpufreq_freq_transition_end(policy, &freqs, 0); + break; + } + } + return 0; +} + +static unsigned int powernow_k6_get(unsigned int cpu) +{ + unsigned int ret; + ret = (busfreq * powernow_k6_get_cpu_multiplier()); + return ret; +} + +static struct cpufreq_driver powernow_k6_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernow_k6_target, + .init = powernow_k6_cpu_init, + .exit = powernow_k6_cpu_exit, + .get = powernow_k6_get, + .name = "powernow-k6", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id powernow_k6_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(AMD, 5, 12, NULL), + X86_MATCH_VENDOR_FAM_MODEL(AMD, 5, 13, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, powernow_k6_ids); + +/** + * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver + * + * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported + * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero + * on success. + */ +static int __init powernow_k6_init(void) +{ + if (!x86_match_cpu(powernow_k6_ids)) + return -ENODEV; + + if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { + pr_info("PowerNow IOPORT region already used\n"); + return -EIO; + } + + if (cpufreq_register_driver(&powernow_k6_driver)) { + release_region(POWERNOW_IOPORT, 16); + return -EINVAL; + } + + return 0; +} + + +/** + * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support + * + * Unregisters AMD K6-2+ / K6-3+ PowerNow! support. + */ +static void __exit powernow_k6_exit(void) +{ + cpufreq_unregister_driver(&powernow_k6_driver); + release_region(POWERNOW_IOPORT, 16); +} + + +MODULE_AUTHOR("Arjan van de Ven, Dave Jones, " + "Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); +MODULE_LICENSE("GPL"); + +module_init(powernow_k6_init); +module_exit(powernow_k6_exit); diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c new file mode 100644 index 000000000..5d515fc34 --- /dev/null +++ b/drivers/cpufreq/powernow-k7.c @@ -0,0 +1,696 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * AMD K7 Powernow driver. + * (C) 2003 Dave Jones on behalf of SuSE Labs. + * + * Based upon datasheets & sample CPUs kindly provided by AMD. + * + * Errata 5: + * CPU may fail to execute a FID/VID change in presence of interrupt. + * - We cli/sti on stepping A0 CPUs around the FID/VID transition. + * Errata 15: + * CPU with half frequency multipliers may hang upon wakeup from disconnect. + * - We disable half multipliers if ACPI is used on A0 stepping CPUs. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/dmi.h> +#include <linux/timex.h> +#include <linux/io.h> + +#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ +#include <asm/msr.h> +#include <asm/cpu_device_id.h> + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +#include <linux/acpi.h> +#include <acpi/processor.h> +#endif + +#include "powernow-k7.h" + +struct psb_s { + u8 signature[10]; + u8 tableversion; + u8 flags; + u16 settlingtime; + u8 reserved1; + u8 numpst; +}; + +struct pst_s { + u32 cpuid; + u8 fsbspeed; + u8 maxfid; + u8 startvid; + u8 numpstates; +}; + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +union powernow_acpi_control_t { + struct { + unsigned long fid:5, + vid:5, + sgtc:20, + res1:2; + } bits; + unsigned long val; +}; +#endif + +/* divide by 1000 to get VCore voltage in V. */ +static const int mobile_vid_table[32] = { + 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, + 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, + 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, + 1075, 1050, 1025, 1000, 975, 950, 925, 0, +}; + +/* divide by 10 to get FID. */ +static const int fid_codes[32] = { + 110, 115, 120, 125, 50, 55, 60, 65, + 70, 75, 80, 85, 90, 95, 100, 105, + 30, 190, 40, 200, 130, 135, 140, 210, + 150, 225, 160, 165, 170, 180, -1, -1, +}; + +/* This parameter is used in order to force ACPI instead of legacy method for + * configuration purpose. + */ + +static int acpi_force; + +static struct cpufreq_frequency_table *powernow_table; + +static unsigned int can_scale_bus; +static unsigned int can_scale_vid; +static unsigned int minimum_speed = -1; +static unsigned int maximum_speed; +static unsigned int number_scales; +static unsigned int fsb; +static unsigned int latency; +static char have_a0; + +static int check_fsb(unsigned int fsbspeed) +{ + int delta; + unsigned int f = fsb / 1000; + + delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; + return delta < 5; +} + +static const struct x86_cpu_id powernow_k7_cpuids[] = { + X86_MATCH_VENDOR_FAM(AMD, 6, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids); + +static int check_powernow(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + unsigned int maxei, eax, ebx, ecx, edx; + + if (!x86_match_cpu(powernow_k7_cpuids)) + return 0; + + /* Get maximum capabilities */ + maxei = cpuid_eax(0x80000000); + if (maxei < 0x80000007) { /* Any powernow info ? */ +#ifdef MODULE + pr_info("No powernow capabilities detected\n"); +#endif + return 0; + } + + if ((c->x86_model == 6) && (c->x86_stepping == 0)) { + pr_info("K7 660[A0] core detected, enabling errata workarounds\n"); + have_a0 = 1; + } + + cpuid(0x80000007, &eax, &ebx, &ecx, &edx); + + /* Check we can actually do something before we say anything.*/ + if (!(edx & (1 << 1 | 1 << 2))) + return 0; + + pr_info("PowerNOW! Technology present. Can scale: "); + + if (edx & 1 << 1) { + pr_cont("frequency"); + can_scale_bus = 1; + } + + if ((edx & (1 << 1 | 1 << 2)) == 0x6) + pr_cont(" and "); + + if (edx & 1 << 2) { + pr_cont("voltage"); + can_scale_vid = 1; + } + + pr_cont("\n"); + return 1; +} + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +static void invalidate_entry(unsigned int entry) +{ + powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} +#endif + +static int get_ranges(unsigned char *pst) +{ + unsigned int j; + unsigned int speed; + u8 fid, vid; + + powernow_table = kzalloc((sizeof(*powernow_table) * + (number_scales + 1)), GFP_KERNEL); + if (!powernow_table) + return -ENOMEM; + + for (j = 0 ; j < number_scales; j++) { + fid = *pst++; + + powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; + powernow_table[j].driver_data = fid; /* lower 8 bits */ + + speed = powernow_table[j].frequency; + + if ((fid_codes[fid] % 10) == 5) { +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + if (have_a0 == 1) + invalidate_entry(j); +#endif + } + + if (speed < minimum_speed) + minimum_speed = speed; + if (speed > maximum_speed) + maximum_speed = speed; + + vid = *pst++; + powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ + + pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, + mobile_vid_table[vid]/1000, + mobile_vid_table[vid]%1000); + } + powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; + powernow_table[number_scales].driver_data = 0; + + return 0; +} + + +static void change_FID(int fid) +{ + union msr_fidvidctl fidvidctl; + + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + if (fidvidctl.bits.FID != fid) { + fidvidctl.bits.SGTC = latency; + fidvidctl.bits.FID = fid; + fidvidctl.bits.VIDC = 0; + fidvidctl.bits.FIDC = 1; + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + } +} + + +static void change_VID(int vid) +{ + union msr_fidvidctl fidvidctl; + + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + if (fidvidctl.bits.VID != vid) { + fidvidctl.bits.SGTC = latency; + fidvidctl.bits.VID = vid; + fidvidctl.bits.FIDC = 0; + fidvidctl.bits.VIDC = 1; + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); + } +} + + +static int powernow_target(struct cpufreq_policy *policy, unsigned int index) +{ + u8 fid, vid; + struct cpufreq_freqs freqs; + union msr_fidvidstatus fidvidstatus; + int cfid; + + /* fid are the lower 8 bits of the index we stored into + * the cpufreq frequency table in powernow_decode_bios, + * vid are the upper 8 bits. + */ + + fid = powernow_table[index].driver_data & 0xFF; + vid = (powernow_table[index].driver_data & 0xFF00) >> 8; + + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); + cfid = fidvidstatus.bits.CFID; + freqs.old = fsb * fid_codes[cfid] / 10; + + freqs.new = powernow_table[index].frequency; + + /* Now do the magic poking into the MSRs. */ + + if (have_a0 == 1) /* A0 errata 5 */ + local_irq_disable(); + + if (freqs.old > freqs.new) { + /* Going down, so change FID first */ + change_FID(fid); + change_VID(vid); + } else { + /* Going up, so change VID first */ + change_VID(vid); + change_FID(fid); + } + + + if (have_a0 == 1) + local_irq_enable(); + + return 0; +} + + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + +static struct acpi_processor_performance *acpi_processor_perf; + +static int powernow_acpi_init(void) +{ + int i; + int retval = 0; + union powernow_acpi_control_t pc; + + if (acpi_processor_perf != NULL && powernow_table != NULL) { + retval = -EINVAL; + goto err0; + } + + acpi_processor_perf = kzalloc(sizeof(*acpi_processor_perf), GFP_KERNEL); + if (!acpi_processor_perf) { + retval = -ENOMEM; + goto err0; + } + + if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, + GFP_KERNEL)) { + retval = -ENOMEM; + goto err05; + } + + if (acpi_processor_register_performance(acpi_processor_perf, 0)) { + retval = -EIO; + goto err1; + } + + if (acpi_processor_perf->control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { + retval = -ENODEV; + goto err2; + } + + if (acpi_processor_perf->status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { + retval = -ENODEV; + goto err2; + } + + number_scales = acpi_processor_perf->state_count; + + if (number_scales < 2) { + retval = -ENODEV; + goto err2; + } + + powernow_table = kzalloc((sizeof(*powernow_table) * + (number_scales + 1)), GFP_KERNEL); + if (!powernow_table) { + retval = -ENOMEM; + goto err2; + } + + pc.val = (unsigned long) acpi_processor_perf->states[0].control; + for (i = 0; i < number_scales; i++) { + u8 fid, vid; + struct acpi_processor_px *state = + &acpi_processor_perf->states[i]; + unsigned int speed, speed_mhz; + + pc.val = (unsigned long) state->control; + pr_debug("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", + i, + (u32) state->core_frequency, + (u32) state->power, + (u32) state->transition_latency, + (u32) state->control, + pc.bits.sgtc); + + vid = pc.bits.vid; + fid = pc.bits.fid; + + powernow_table[i].frequency = fsb * fid_codes[fid] / 10; + powernow_table[i].driver_data = fid; /* lower 8 bits */ + powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ + + speed = powernow_table[i].frequency; + speed_mhz = speed / 1000; + + /* processor_perflib will multiply the MHz value by 1000 to + * get a KHz value (e.g. 1266000). However, powernow-k7 works + * with true KHz values (e.g. 1266768). To ensure that all + * powernow frequencies are available, we must ensure that + * ACPI doesn't restrict them, so we round up the MHz value + * to ensure that perflib's computed KHz value is greater than + * or equal to powernow's KHz value. + */ + if (speed % 1000 > 0) + speed_mhz++; + + if ((fid_codes[fid] % 10) == 5) { + if (have_a0 == 1) + invalidate_entry(i); + } + + pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed_mhz, vid, + mobile_vid_table[vid]/1000, + mobile_vid_table[vid]%1000); + + if (state->core_frequency != speed_mhz) { + state->core_frequency = speed_mhz; + pr_debug(" Corrected ACPI frequency to %d\n", + speed_mhz); + } + + if (latency < pc.bits.sgtc) + latency = pc.bits.sgtc; + + if (speed < minimum_speed) + minimum_speed = speed; + if (speed > maximum_speed) + maximum_speed = speed; + } + + powernow_table[i].frequency = CPUFREQ_TABLE_END; + powernow_table[i].driver_data = 0; + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + return 0; + +err2: + acpi_processor_unregister_performance(0); +err1: + free_cpumask_var(acpi_processor_perf->shared_cpu_map); +err05: + kfree(acpi_processor_perf); +err0: + pr_warn("ACPI perflib can not be used on this platform\n"); + acpi_processor_perf = NULL; + return retval; +} +#else +static int powernow_acpi_init(void) +{ + pr_info("no support for ACPI processor found - please recompile your kernel with ACPI processor\n"); + return -EINVAL; +} +#endif + +static void print_pst_entry(struct pst_s *pst, unsigned int j) +{ + pr_debug("PST:%d (@%p)\n", j, pst); + pr_debug(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); +} + +static int powernow_decode_bios(int maxfid, int startvid) +{ + struct psb_s *psb; + struct pst_s *pst; + unsigned int i, j; + unsigned char *p; + unsigned int etuple; + unsigned int ret; + + etuple = cpuid_eax(0x80000001); + + for (i = 0xC0000; i < 0xffff0 ; i += 16) { + + p = phys_to_virt(i); + + if (memcmp(p, "AMDK7PNOW!", 10) == 0) { + pr_debug("Found PSB header at %p\n", p); + psb = (struct psb_s *) p; + pr_debug("Table version: 0x%x\n", psb->tableversion); + if (psb->tableversion != 0x12) { + pr_info("Sorry, only v1.2 tables supported right now\n"); + return -ENODEV; + } + + pr_debug("Flags: 0x%x\n", psb->flags); + if ((psb->flags & 1) == 0) + pr_debug("Mobile voltage regulator\n"); + else + pr_debug("Desktop voltage regulator\n"); + + latency = psb->settlingtime; + if (latency < 100) { + pr_info("BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n", + latency); + latency = 100; + } + pr_debug("Settling Time: %d microseconds.\n", + psb->settlingtime); + pr_debug("Has %d PST tables. (Only dumping ones " + "relevant to this CPU).\n", + psb->numpst); + + p += sizeof(*psb); + + pst = (struct pst_s *) p; + + for (j = 0; j < psb->numpst; j++) { + pst = (struct pst_s *) p; + number_scales = pst->numpstates; + + if ((etuple == pst->cpuid) && + check_fsb(pst->fsbspeed) && + (maxfid == pst->maxfid) && + (startvid == pst->startvid)) { + print_pst_entry(pst, j); + p = (char *)pst + sizeof(*pst); + ret = get_ranges(p); + return ret; + } else { + unsigned int k; + p = (char *)pst + sizeof(*pst); + for (k = 0; k < number_scales; k++) + p += 2; + } + } + pr_info("No PST tables match this cpuid (0x%x)\n", + etuple); + pr_info("This is indicative of a broken BIOS\n"); + + return -EINVAL; + } + p++; + } + + return -ENODEV; +} + + +/* + * We use the fact that the bus frequency is somehow + * a multiple of 100000/3 khz, then we compute sgtc according + * to this multiple. + * That way, we match more how AMD thinks all of that work. + * We will then get the same kind of behaviour already tested under + * the "well-known" other OS. + */ +static int fixup_sgtc(void) +{ + unsigned int sgtc; + unsigned int m; + + m = fsb / 3333; + if ((m % 10) >= 5) + m += 5; + + m /= 10; + + sgtc = 100 * m * latency; + sgtc = sgtc / 3; + if (sgtc > 0xfffff) { + pr_warn("SGTC too large %d\n", sgtc); + sgtc = 0xfffff; + } + return sgtc; +} + +static unsigned int powernow_get(unsigned int cpu) +{ + union msr_fidvidstatus fidvidstatus; + unsigned int cfid; + + if (cpu) + return 0; + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); + cfid = fidvidstatus.bits.CFID; + + return fsb * fid_codes[cfid] / 10; +} + + +static int acer_cpufreq_pst(const struct dmi_system_id *d) +{ + pr_warn("%s laptop with broken PST tables in BIOS detected\n", + d->ident); + pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); + pr_warn("cpufreq scaling has been disabled as a result of this\n"); + return 0; +} + +/* + * Some Athlon laptops have really fucked PST tables. + * A BIOS update is all that can save them. + * Mention this, and disable cpufreq. + */ +static const struct dmi_system_id powernow_dmi_table[] = { + { + .callback = acer_cpufreq_pst, + .ident = "Acer Aspire", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), + DMI_MATCH(DMI_BIOS_VERSION, "3A71"), + }, + }, + { } +}; + +static int powernow_cpu_init(struct cpufreq_policy *policy) +{ + union msr_fidvidstatus fidvidstatus; + int result; + + if (policy->cpu != 0) + return -ENODEV; + + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); + + recalibrate_cpu_khz(); + + fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; + if (!fsb) { + pr_warn("can not determine bus frequency\n"); + return -EINVAL; + } + pr_debug("FSB: %3dMHz\n", fsb/1000); + + if (dmi_check_system(powernow_dmi_table) || acpi_force) { + pr_info("PSB/PST known to be broken - trying ACPI instead\n"); + result = powernow_acpi_init(); + } else { + result = powernow_decode_bios(fidvidstatus.bits.MFID, + fidvidstatus.bits.SVID); + if (result) { + pr_info("Trying ACPI perflib\n"); + maximum_speed = 0; + minimum_speed = -1; + latency = 0; + result = powernow_acpi_init(); + if (result) { + pr_info("ACPI and legacy methods failed\n"); + } + } else { + /* SGTC use the bus clock as timer */ + latency = fixup_sgtc(); + pr_info("SGTC: %d\n", latency); + } + } + + if (result) + return result; + + pr_info("Minimum speed %d MHz - Maximum speed %d MHz\n", + minimum_speed/1000, maximum_speed/1000); + + policy->cpuinfo.transition_latency = + cpufreq_scale(2000000UL, fsb, latency); + policy->freq_table = powernow_table; + + return 0; +} + +static int powernow_cpu_exit(struct cpufreq_policy *policy) +{ +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + if (acpi_processor_perf) { + acpi_processor_unregister_performance(0); + free_cpumask_var(acpi_processor_perf->shared_cpu_map); + kfree(acpi_processor_perf); + } +#endif + + kfree(powernow_table); + return 0; +} + +static struct cpufreq_driver powernow_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernow_target, + .get = powernow_get, +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + .bios_limit = acpi_processor_get_bios_limit, +#endif + .init = powernow_cpu_init, + .exit = powernow_cpu_exit, + .name = "powernow-k7", + .attr = cpufreq_generic_attr, +}; + +static int __init powernow_init(void) +{ + if (check_powernow() == 0) + return -ENODEV; + return cpufreq_register_driver(&powernow_driver); +} + + +static void __exit powernow_exit(void) +{ + cpufreq_unregister_driver(&powernow_driver); +} + +module_param(acpi_force, int, 0444); +MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); + +MODULE_AUTHOR("Dave Jones"); +MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); +MODULE_LICENSE("GPL"); + +late_initcall(powernow_init); +module_exit(powernow_exit); + diff --git a/drivers/cpufreq/powernow-k7.h b/drivers/cpufreq/powernow-k7.h new file mode 100644 index 000000000..4bc673fae --- /dev/null +++ b/drivers/cpufreq/powernow-k7.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * (C) 2003 Dave Jones. + * + * AMD-specific information + */ + +union msr_fidvidctl { + struct { + unsigned FID:5, // 4:0 + reserved1:3, // 7:5 + VID:5, // 12:8 + reserved2:3, // 15:13 + FIDC:1, // 16 + VIDC:1, // 17 + reserved3:2, // 19:18 + FIDCHGRATIO:1, // 20 + reserved4:11, // 31-21 + SGTC:20, // 32:51 + reserved5:12; // 63:52 + } bits; + unsigned long long val; +}; + +union msr_fidvidstatus { + struct { + unsigned CFID:5, // 4:0 + reserved1:3, // 7:5 + SFID:5, // 12:8 + reserved2:3, // 15:13 + MFID:5, // 20:16 + reserved3:11, // 31:21 + CVID:5, // 36:32 + reserved4:3, // 39:37 + SVID:5, // 44:40 + reserved5:3, // 47:45 + MVID:5, // 52:48 + reserved6:11; // 63:53 + } bits; + unsigned long long val; +}; diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c new file mode 100644 index 000000000..b10f7a1b7 --- /dev/null +++ b/drivers/cpufreq/powernow-k8.c @@ -0,0 +1,1221 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (c) 2003-2012 Advanced Micro Devices, Inc. + * + * Maintainer: + * Andreas Herrmann <herrmann.der.user@googlemail.com> + * + * Based on the powernow-k7.c module written by Dave Jones. + * (C) 2003 Dave Jones on behalf of SuSE Labs + * (C) 2004 Dominik Brodowski <linux@brodo.de> + * (C) 2004 Pavel Machek <pavel@ucw.cz> + * Based upon datasheets & sample CPUs kindly provided by AMD. + * + * Valuable input gratefully received from Dave Jones, Pavel Machek, + * Dominik Brodowski, Jacob Shin, and others. + * Originally developed by Paul Devriendt. + * + * Processor information obtained from Chapter 9 (Power and Thermal + * Management) of the "BIOS and Kernel Developer's Guide (BKDG) for + * the AMD Athlon 64 and AMD Opteron Processors" and section "2.x + * Power Management" in BKDGs for newer AMD CPU families. + * + * Tables for specific CPUs can be inferred from AMD's processor + * power and thermal data sheets, (e.g. 30417.pdf, 30430.pdf, 43375.pdf) + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/cpumask.h> +#include <linux/io.h> +#include <linux/delay.h> + +#include <asm/msr.h> +#include <asm/cpu_device_id.h> + +#include <linux/acpi.h> +#include <linux/mutex.h> +#include <acpi/processor.h> + +#define VERSION "version 2.20.00" +#include "powernow-k8.h" + +/* serialize freq changes */ +static DEFINE_MUTEX(fidvid_mutex); + +static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); + +static struct cpufreq_driver cpufreq_amd64_driver; + +/* Return a frequency in MHz, given an input fid */ +static u32 find_freq_from_fid(u32 fid) +{ + return 800 + (fid * 100); +} + +/* Return a frequency in KHz, given an input fid */ +static u32 find_khz_freq_from_fid(u32 fid) +{ + return 1000 * find_freq_from_fid(fid); +} + +/* Return the vco fid for an input fid + * + * Each "low" fid has corresponding "high" fid, and you can get to "low" fids + * only from corresponding high fids. This returns "high" fid corresponding to + * "low" one. + */ +static u32 convert_fid_to_vco_fid(u32 fid) +{ + if (fid < HI_FID_TABLE_BOTTOM) + return 8 + (2 * fid); + else + return fid; +} + +/* + * Return 1 if the pending bit is set. Unless we just instructed the processor + * to transition to a new state, seeing this bit set is really bad news. + */ +static int pending_bit_stuck(void) +{ + u32 lo, hi __always_unused; + + rdmsr(MSR_FIDVID_STATUS, lo, hi); + return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; +} + +/* + * Update the global current fid / vid values from the status msr. + * Returns 1 on error. + */ +static int query_current_values_with_pending_wait(struct powernow_k8_data *data) +{ + u32 lo, hi; + u32 i = 0; + + do { + if (i++ > 10000) { + pr_debug("detected change pending stuck\n"); + return 1; + } + rdmsr(MSR_FIDVID_STATUS, lo, hi); + } while (lo & MSR_S_LO_CHANGE_PENDING); + + data->currvid = hi & MSR_S_HI_CURRENT_VID; + data->currfid = lo & MSR_S_LO_CURRENT_FID; + + return 0; +} + +/* the isochronous relief time */ +static void count_off_irt(struct powernow_k8_data *data) +{ + udelay((1 << data->irt) * 10); +} + +/* the voltage stabilization time */ +static void count_off_vst(struct powernow_k8_data *data) +{ + udelay(data->vstable * VST_UNITS_20US); +} + +/* need to init the control msr to a safe value (for each cpu) */ +static void fidvid_msr_init(void) +{ + u32 lo, hi; + u8 fid, vid; + + rdmsr(MSR_FIDVID_STATUS, lo, hi); + vid = hi & MSR_S_HI_CURRENT_VID; + fid = lo & MSR_S_LO_CURRENT_FID; + lo = fid | (vid << MSR_C_LO_VID_SHIFT); + hi = MSR_C_HI_STP_GNT_BENIGN; + pr_debug("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); + wrmsr(MSR_FIDVID_CTL, lo, hi); +} + +/* write the new fid value along with the other control fields to the msr */ +static int write_new_fid(struct powernow_k8_data *data, u32 fid) +{ + u32 lo; + u32 savevid = data->currvid; + u32 i = 0; + + if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { + pr_err("internal error - overflow on fid write\n"); + return 1; + } + + lo = fid; + lo |= (data->currvid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; + + pr_debug("writing fid 0x%x, lo 0x%x, hi 0x%x\n", + fid, lo, data->plllock * PLL_LOCK_CONVERSION); + + do { + wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); + if (i++ > 100) { + pr_err("Hardware error - pending bit very stuck - no further pstate changes possible\n"); + return 1; + } + } while (query_current_values_with_pending_wait(data)); + + count_off_irt(data); + + if (savevid != data->currvid) { + pr_err("vid change on fid trans, old 0x%x, new 0x%x\n", + savevid, data->currvid); + return 1; + } + + if (fid != data->currfid) { + pr_err("fid trans failed, fid 0x%x, curr 0x%x\n", fid, + data->currfid); + return 1; + } + + return 0; +} + +/* Write a new vid to the hardware */ +static int write_new_vid(struct powernow_k8_data *data, u32 vid) +{ + u32 lo; + u32 savefid = data->currfid; + int i = 0; + + if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { + pr_err("internal error - overflow on vid write\n"); + return 1; + } + + lo = data->currfid; + lo |= (vid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; + + pr_debug("writing vid 0x%x, lo 0x%x, hi 0x%x\n", + vid, lo, STOP_GRANT_5NS); + + do { + wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); + if (i++ > 100) { + pr_err("internal error - pending bit very stuck - no further pstate changes possible\n"); + return 1; + } + } while (query_current_values_with_pending_wait(data)); + + if (savefid != data->currfid) { + pr_err("fid changed on vid trans, old 0x%x new 0x%x\n", + savefid, data->currfid); + return 1; + } + + if (vid != data->currvid) { + pr_err("vid trans failed, vid 0x%x, curr 0x%x\n", + vid, data->currvid); + return 1; + } + + return 0; +} + +/* + * Reduce the vid by the max of step or reqvid. + * Decreasing vid codes represent increasing voltages: + * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. + */ +static int decrease_vid_code_by_step(struct powernow_k8_data *data, + u32 reqvid, u32 step) +{ + if ((data->currvid - reqvid) > step) + reqvid = data->currvid - step; + + if (write_new_vid(data, reqvid)) + return 1; + + count_off_vst(data); + + return 0; +} + +/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ +static int transition_fid_vid(struct powernow_k8_data *data, + u32 reqfid, u32 reqvid) +{ + if (core_voltage_pre_transition(data, reqvid, reqfid)) + return 1; + + if (core_frequency_transition(data, reqfid)) + return 1; + + if (core_voltage_post_transition(data, reqvid)) + return 1; + + if (query_current_values_with_pending_wait(data)) + return 1; + + if ((reqfid != data->currfid) || (reqvid != data->currvid)) { + pr_err("failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", + smp_processor_id(), + reqfid, reqvid, data->currfid, data->currvid); + return 1; + } + + pr_debug("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", + smp_processor_id(), data->currfid, data->currvid); + + return 0; +} + +/* Phase 1 - core voltage transition ... setup voltage */ +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid, u32 reqfid) +{ + u32 rvosteps = data->rvo; + u32 savefid = data->currfid; + u32 maxvid, lo __always_unused, rvomult = 1; + + pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid, reqvid, data->rvo); + + if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) + rvomult = 2; + rvosteps *= rvomult; + rdmsr(MSR_FIDVID_STATUS, lo, maxvid); + maxvid = 0x1f & (maxvid >> 16); + pr_debug("ph1 maxvid=0x%x\n", maxvid); + if (reqvid < maxvid) /* lower numbers are higher voltages */ + reqvid = maxvid; + + while (data->currvid > reqvid) { + pr_debug("ph1: curr 0x%x, req vid 0x%x\n", + data->currvid, reqvid); + if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) + return 1; + } + + while ((rvosteps > 0) && + ((rvomult * data->rvo + data->currvid) > reqvid)) { + if (data->currvid == maxvid) { + rvosteps = 0; + } else { + pr_debug("ph1: changing vid for rvo, req 0x%x\n", + data->currvid - 1); + if (decrease_vid_code_by_step(data, data->currvid-1, 1)) + return 1; + rvosteps--; + } + } + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (savefid != data->currfid) { + pr_err("ph1 err, currfid changed 0x%x\n", data->currfid); + return 1; + } + + pr_debug("ph1 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +/* Phase 2 - core frequency transition */ +static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) +{ + u32 vcoreqfid, vcocurrfid, vcofiddiff; + u32 fid_interval, savevid = data->currvid; + + if (data->currfid == reqfid) { + pr_err("ph2 null fid transition 0x%x\n", data->currfid); + return 0; + } + + pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid, reqfid); + + vcoreqfid = convert_fid_to_vco_fid(reqfid); + vcocurrfid = convert_fid_to_vco_fid(data->currfid); + vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid + : vcoreqfid - vcocurrfid; + + if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) + vcofiddiff = 0; + + while (vcofiddiff > 2) { + (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); + + if (reqfid > data->currfid) { + if (data->currfid > LO_FID_TABLE_TOP) { + if (write_new_fid(data, + data->currfid + fid_interval)) + return 1; + } else { + if (write_new_fid + (data, + 2 + convert_fid_to_vco_fid(data->currfid))) + return 1; + } + } else { + if (write_new_fid(data, data->currfid - fid_interval)) + return 1; + } + + vcocurrfid = convert_fid_to_vco_fid(data->currfid); + vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid + : vcoreqfid - vcocurrfid; + } + + if (write_new_fid(data, reqfid)) + return 1; + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (data->currfid != reqfid) { + pr_err("ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", + data->currfid, reqfid); + return 1; + } + + if (savevid != data->currvid) { + pr_err("ph2: vid changed, save 0x%x, curr 0x%x\n", + savevid, data->currvid); + return 1; + } + + pr_debug("ph2 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +/* Phase 3 - core voltage transition flow ... jump to the final vid. */ +static int core_voltage_post_transition(struct powernow_k8_data *data, + u32 reqvid) +{ + u32 savefid = data->currfid; + u32 savereqvid = reqvid; + + pr_debug("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid); + + if (reqvid != data->currvid) { + if (write_new_vid(data, reqvid)) + return 1; + + if (savefid != data->currfid) { + pr_err("ph3: bad fid change, save 0x%x, curr 0x%x\n", + savefid, data->currfid); + return 1; + } + + if (data->currvid != reqvid) { + pr_err("ph3: failed vid transition\n, req 0x%x, curr 0x%x", + reqvid, data->currvid); + return 1; + } + } + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (savereqvid != data->currvid) { + pr_debug("ph3 failed, currvid 0x%x\n", data->currvid); + return 1; + } + + if (savefid != data->currfid) { + pr_debug("ph3 failed, currfid changed 0x%x\n", + data->currfid); + return 1; + } + + pr_debug("ph3 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +static const struct x86_cpu_id powernow_k8_ids[] = { + /* IO based frequency switching */ + X86_MATCH_VENDOR_FAM(AMD, 0xf, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids); + +static void check_supported_cpu(void *_rc) +{ + u32 eax, ebx, ecx, edx; + int *rc = _rc; + + *rc = -ENODEV; + + eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + + if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { + if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || + ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { + pr_info("Processor cpuid %x not supported\n", eax); + return; + } + + eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); + if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { + pr_info("No frequency change capabilities detected\n"); + return; + } + + cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); + if ((edx & P_STATE_TRANSITION_CAPABLE) + != P_STATE_TRANSITION_CAPABLE) { + pr_info("Power state transitions not supported\n"); + return; + } + *rc = 0; + } +} + +static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, + u8 maxvid) +{ + unsigned int j; + u8 lastfid = 0xff; + + for (j = 0; j < data->numps; j++) { + if (pst[j].vid > LEAST_VID) { + pr_err(FW_BUG "vid %d invalid : 0x%x\n", j, + pst[j].vid); + return -EINVAL; + } + if (pst[j].vid < data->rvo) { + /* vid + rvo >= 0 */ + pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (pst[j].vid < maxvid + data->rvo) { + /* vid + rvo >= maxvid */ + pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (pst[j].fid > MAX_FID) { + pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { + /* Only first fid is allowed to be in "low" range */ + pr_err(FW_BUG "two low fids - %d : 0x%x\n", j, + pst[j].fid); + return -EINVAL; + } + if (pst[j].fid < lastfid) + lastfid = pst[j].fid; + } + if (lastfid & 1) { + pr_err(FW_BUG "lastfid invalid\n"); + return -EINVAL; + } + if (lastfid > LO_FID_TABLE_TOP) + pr_info(FW_BUG "first fid not from lo freq table\n"); + + return 0; +} + +static void invalidate_entry(struct cpufreq_frequency_table *powernow_table, + unsigned int entry) +{ + powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} + +static void print_basics(struct powernow_k8_data *data) +{ + int j; + for (j = 0; j < data->numps; j++) { + if (data->powernow_table[j].frequency != + CPUFREQ_ENTRY_INVALID) { + pr_info("fid 0x%x (%d MHz), vid 0x%x\n", + data->powernow_table[j].driver_data & 0xff, + data->powernow_table[j].frequency/1000, + data->powernow_table[j].driver_data >> 8); + } + } + if (data->batps) + pr_info("Only %d pstates on battery\n", data->batps); +} + +static int fill_powernow_table(struct powernow_k8_data *data, + struct pst_s *pst, u8 maxvid) +{ + struct cpufreq_frequency_table *powernow_table; + unsigned int j; + + if (data->batps) { + /* use ACPI support to get full speed on mains power */ + pr_warn("Only %d pstates usable (use ACPI driver for full range\n", + data->batps); + data->numps = data->batps; + } + + for (j = 1; j < data->numps; j++) { + if (pst[j-1].fid >= pst[j].fid) { + pr_err("PST out of sequence\n"); + return -EINVAL; + } + } + + if (data->numps < 2) { + pr_err("no p states to transition\n"); + return -ENODEV; + } + + if (check_pst_table(data, pst, maxvid)) + return -EINVAL; + + powernow_table = kzalloc((sizeof(*powernow_table) + * (data->numps + 1)), GFP_KERNEL); + if (!powernow_table) + return -ENOMEM; + + for (j = 0; j < data->numps; j++) { + int freq; + powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */ + powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8 bits */ + freq = find_khz_freq_from_fid(pst[j].fid); + powernow_table[j].frequency = freq; + } + powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; + powernow_table[data->numps].driver_data = 0; + + if (query_current_values_with_pending_wait(data)) { + kfree(powernow_table); + return -EIO; + } + + pr_debug("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); + data->powernow_table = powernow_table; + if (cpumask_first(topology_core_cpumask(data->cpu)) == data->cpu) + print_basics(data); + + for (j = 0; j < data->numps; j++) + if ((pst[j].fid == data->currfid) && + (pst[j].vid == data->currvid)) + return 0; + + pr_debug("currfid/vid do not match PST, ignoring\n"); + return 0; +} + +/* Find and validate the PSB/PST table in BIOS. */ +static int find_psb_table(struct powernow_k8_data *data) +{ + struct psb_s *psb; + unsigned int i; + u32 mvs; + u8 maxvid; + u32 cpst = 0; + u32 thiscpuid; + + for (i = 0xc0000; i < 0xffff0; i += 0x10) { + /* Scan BIOS looking for the signature. */ + /* It can not be at ffff0 - it is too big. */ + + psb = phys_to_virt(i); + if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) + continue; + + pr_debug("found PSB header at 0x%p\n", psb); + + pr_debug("table vers: 0x%x\n", psb->tableversion); + if (psb->tableversion != PSB_VERSION_1_4) { + pr_err(FW_BUG "PSB table is not v1.4\n"); + return -ENODEV; + } + + pr_debug("flags: 0x%x\n", psb->flags1); + if (psb->flags1) { + pr_err(FW_BUG "unknown flags\n"); + return -ENODEV; + } + + data->vstable = psb->vstable; + pr_debug("voltage stabilization time: %d(*20us)\n", + data->vstable); + + pr_debug("flags2: 0x%x\n", psb->flags2); + data->rvo = psb->flags2 & 3; + data->irt = ((psb->flags2) >> 2) & 3; + mvs = ((psb->flags2) >> 4) & 3; + data->vidmvs = 1 << mvs; + data->batps = ((psb->flags2) >> 6) & 3; + + pr_debug("ramp voltage offset: %d\n", data->rvo); + pr_debug("isochronous relief time: %d\n", data->irt); + pr_debug("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); + + pr_debug("numpst: 0x%x\n", psb->num_tables); + cpst = psb->num_tables; + if ((psb->cpuid == 0x00000fc0) || + (psb->cpuid == 0x00000fe0)) { + thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + if ((thiscpuid == 0x00000fc0) || + (thiscpuid == 0x00000fe0)) + cpst = 1; + } + if (cpst != 1) { + pr_err(FW_BUG "numpst must be 1\n"); + return -ENODEV; + } + + data->plllock = psb->plllocktime; + pr_debug("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); + pr_debug("maxfid: 0x%x\n", psb->maxfid); + pr_debug("maxvid: 0x%x\n", psb->maxvid); + maxvid = psb->maxvid; + + data->numps = psb->numps; + pr_debug("numpstates: 0x%x\n", data->numps); + return fill_powernow_table(data, + (struct pst_s *)(psb+1), maxvid); + } + /* + * If you see this message, complain to BIOS manufacturer. If + * he tells you "we do not support Linux" or some similar + * nonsense, remember that Windows 2000 uses the same legacy + * mechanism that the old Linux PSB driver uses. Tell them it + * is broken with Windows 2000. + * + * The reference to the AMD documentation is chapter 9 in the + * BIOS and Kernel Developer's Guide, which is available on + * www.amd.com + */ + pr_err(FW_BUG "No PSB or ACPI _PSS objects\n"); + pr_err("Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup\n"); + return -ENODEV; +} + +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, + unsigned int index) +{ + u64 control; + + if (!data->acpi_data.state_count) + return; + + control = data->acpi_data.states[index].control; + data->irt = (control >> IRT_SHIFT) & IRT_MASK; + data->rvo = (control >> RVO_SHIFT) & RVO_MASK; + data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; + data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; + data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); + data->vstable = (control >> VST_SHIFT) & VST_MASK; +} + +static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) +{ + struct cpufreq_frequency_table *powernow_table; + int ret_val = -ENODEV; + u64 control, status; + + if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { + pr_debug("register performance failed: bad ACPI data\n"); + return -EIO; + } + + /* verify the data contained in the ACPI structures */ + if (data->acpi_data.state_count <= 1) { + pr_debug("No ACPI P-States\n"); + goto err_out; + } + + control = data->acpi_data.control_register.space_id; + status = data->acpi_data.status_register.space_id; + + if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + pr_debug("Invalid control/status registers (%llx - %llx)\n", + control, status); + goto err_out; + } + + /* fill in data->powernow_table */ + powernow_table = kzalloc((sizeof(*powernow_table) + * (data->acpi_data.state_count + 1)), GFP_KERNEL); + if (!powernow_table) + goto err_out; + + /* fill in data */ + data->numps = data->acpi_data.state_count; + powernow_k8_acpi_pst_values(data, 0); + + ret_val = fill_powernow_table_fidvid(data, powernow_table); + if (ret_val) + goto err_out_mem; + + powernow_table[data->acpi_data.state_count].frequency = + CPUFREQ_TABLE_END; + data->powernow_table = powernow_table; + + if (cpumask_first(topology_core_cpumask(data->cpu)) == data->cpu) + print_basics(data); + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { + pr_err("unable to alloc powernow_k8_data cpumask\n"); + ret_val = -ENOMEM; + goto err_out_mem; + } + + return 0; + +err_out_mem: + kfree(powernow_table); + +err_out: + acpi_processor_unregister_performance(data->cpu); + + /* data->acpi_data.state_count informs us at ->exit() + * whether ACPI was used */ + data->acpi_data.state_count = 0; + + return ret_val; +} + +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) +{ + int i; + + for (i = 0; i < data->acpi_data.state_count; i++) { + u32 fid; + u32 vid; + u32 freq, index; + u64 status, control; + + if (data->exttype) { + status = data->acpi_data.states[i].status; + fid = status & EXT_FID_MASK; + vid = (status >> VID_SHIFT) & EXT_VID_MASK; + } else { + control = data->acpi_data.states[i].control; + fid = control & FID_MASK; + vid = (control >> VID_SHIFT) & VID_MASK; + } + + pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); + + index = fid | (vid<<8); + powernow_table[i].driver_data = index; + + freq = find_khz_freq_from_fid(fid); + powernow_table[i].frequency = freq; + + /* verify frequency is OK */ + if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { + pr_debug("invalid freq %u kHz, ignoring\n", freq); + invalidate_entry(powernow_table, i); + continue; + } + + /* verify voltage is OK - + * BIOSs are using "off" to indicate invalid */ + if (vid == VID_OFF) { + pr_debug("invalid vid %u, ignoring\n", vid); + invalidate_entry(powernow_table, i); + continue; + } + + if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { + pr_info("invalid freq entries %u kHz vs. %u kHz\n", + freq, (unsigned int) + (data->acpi_data.states[i].core_frequency + * 1000)); + invalidate_entry(powernow_table, i); + continue; + } + } + return 0; +} + +static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) +{ + if (data->acpi_data.state_count) + acpi_processor_unregister_performance(data->cpu); + free_cpumask_var(data->acpi_data.shared_cpu_map); +} + +static int get_transition_latency(struct powernow_k8_data *data) +{ + int max_latency = 0; + int i; + for (i = 0; i < data->acpi_data.state_count; i++) { + int cur_latency = data->acpi_data.states[i].transition_latency + + data->acpi_data.states[i].bus_master_latency; + if (cur_latency > max_latency) + max_latency = cur_latency; + } + if (max_latency == 0) { + pr_err(FW_WARN "Invalid zero transition latency\n"); + max_latency = 1; + } + /* value in usecs, needs to be in nanoseconds */ + return 1000 * max_latency; +} + +/* Take a frequency, and issue the fid/vid transition command */ +static int transition_frequency_fidvid(struct powernow_k8_data *data, + unsigned int index, + struct cpufreq_policy *policy) +{ + u32 fid = 0; + u32 vid = 0; + int res; + struct cpufreq_freqs freqs; + + pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index); + + /* fid/vid correctness check for k8 */ + /* fid are the lower 8 bits of the index we stored into + * the cpufreq frequency table in find_psb_table, vid + * are the upper 8 bits. + */ + fid = data->powernow_table[index].driver_data & 0xFF; + vid = (data->powernow_table[index].driver_data & 0xFF00) >> 8; + + pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); + + if (query_current_values_with_pending_wait(data)) + return 1; + + if ((data->currvid == vid) && (data->currfid == fid)) { + pr_debug("target matches current values (fid 0x%x, vid 0x%x)\n", + fid, vid); + return 0; + } + + pr_debug("cpu %d, changing to fid 0x%x, vid 0x%x\n", + smp_processor_id(), fid, vid); + freqs.old = find_khz_freq_from_fid(data->currfid); + freqs.new = find_khz_freq_from_fid(fid); + + cpufreq_freq_transition_begin(policy, &freqs); + res = transition_fid_vid(data, fid, vid); + cpufreq_freq_transition_end(policy, &freqs, res); + + return res; +} + +struct powernowk8_target_arg { + struct cpufreq_policy *pol; + unsigned newstate; +}; + +static long powernowk8_target_fn(void *arg) +{ + struct powernowk8_target_arg *pta = arg; + struct cpufreq_policy *pol = pta->pol; + unsigned newstate = pta->newstate; + struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); + u32 checkfid; + u32 checkvid; + int ret; + + if (!data) + return -EINVAL; + + checkfid = data->currfid; + checkvid = data->currvid; + + if (pending_bit_stuck()) { + pr_err("failing targ, change pending bit set\n"); + return -EIO; + } + + pr_debug("targ: cpu %d, %d kHz, min %d, max %d\n", + pol->cpu, data->powernow_table[newstate].frequency, pol->min, + pol->max); + + if (query_current_values_with_pending_wait(data)) + return -EIO; + + pr_debug("targ: curr fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); + + if ((checkvid != data->currvid) || + (checkfid != data->currfid)) { + pr_info("error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, + checkvid, data->currvid); + } + + mutex_lock(&fidvid_mutex); + + powernow_k8_acpi_pst_values(data, newstate); + + ret = transition_frequency_fidvid(data, newstate, pol); + + if (ret) { + pr_err("transition frequency failed\n"); + mutex_unlock(&fidvid_mutex); + return 1; + } + mutex_unlock(&fidvid_mutex); + + pol->cur = find_khz_freq_from_fid(data->currfid); + + return 0; +} + +/* Driver entry point to switch to the target frequency */ +static int powernowk8_target(struct cpufreq_policy *pol, unsigned index) +{ + struct powernowk8_target_arg pta = { .pol = pol, .newstate = index }; + + return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); +} + +struct init_on_cpu { + struct powernow_k8_data *data; + int rc; +}; + +static void powernowk8_cpu_init_on_cpu(void *_init_on_cpu) +{ + struct init_on_cpu *init_on_cpu = _init_on_cpu; + + if (pending_bit_stuck()) { + pr_err("failing init, change pending bit set\n"); + init_on_cpu->rc = -ENODEV; + return; + } + + if (query_current_values_with_pending_wait(init_on_cpu->data)) { + init_on_cpu->rc = -ENODEV; + return; + } + + fidvid_msr_init(); + + init_on_cpu->rc = 0; +} + +#define MISSING_PSS_MSG \ + FW_BUG "No compatible ACPI _PSS objects found.\n" \ + FW_BUG "First, make sure Cool'N'Quiet is enabled in the BIOS.\n" \ + FW_BUG "If that doesn't help, try upgrading your BIOS.\n" + +/* per CPU init entry point to the driver */ +static int powernowk8_cpu_init(struct cpufreq_policy *pol) +{ + struct powernow_k8_data *data; + struct init_on_cpu init_on_cpu; + int rc, cpu; + + smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); + if (rc) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->cpu = pol->cpu; + + if (powernow_k8_cpu_init_acpi(data)) { + /* + * Use the PSB BIOS structure. This is only available on + * an UP version, and is deprecated by AMD. + */ + if (num_online_cpus() != 1) { + pr_err_once(MISSING_PSS_MSG); + goto err_out; + } + if (pol->cpu != 0) { + pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n"); + goto err_out; + } + rc = find_psb_table(data); + if (rc) + goto err_out; + + /* Take a crude guess here. + * That guess was in microseconds, so multiply with 1000 */ + pol->cpuinfo.transition_latency = ( + ((data->rvo + 8) * data->vstable * VST_UNITS_20US) + + ((1 << data->irt) * 30)) * 1000; + } else /* ACPI _PSS objects available */ + pol->cpuinfo.transition_latency = get_transition_latency(data); + + /* only run on specific CPU from here on */ + init_on_cpu.data = data; + smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, + &init_on_cpu, 1); + rc = init_on_cpu.rc; + if (rc != 0) + goto err_out_exit_acpi; + + cpumask_copy(pol->cpus, topology_core_cpumask(pol->cpu)); + data->available_cores = pol->cpus; + pol->freq_table = data->powernow_table; + + pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); + + /* Point all the CPUs in this policy to the same data */ + for_each_cpu(cpu, pol->cpus) + per_cpu(powernow_data, cpu) = data; + + return 0; + +err_out_exit_acpi: + powernow_k8_cpu_exit_acpi(data); + +err_out: + kfree(data); + return -ENODEV; +} + +static int powernowk8_cpu_exit(struct cpufreq_policy *pol) +{ + struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); + int cpu; + + if (!data) + return -EINVAL; + + powernow_k8_cpu_exit_acpi(data); + + kfree(data->powernow_table); + kfree(data); + /* pol->cpus will be empty here, use related_cpus instead. */ + for_each_cpu(cpu, pol->related_cpus) + per_cpu(powernow_data, cpu) = NULL; + + return 0; +} + +static void query_values_on_cpu(void *_err) +{ + int *err = _err; + struct powernow_k8_data *data = __this_cpu_read(powernow_data); + + *err = query_current_values_with_pending_wait(data); +} + +static unsigned int powernowk8_get(unsigned int cpu) +{ + struct powernow_k8_data *data = per_cpu(powernow_data, cpu); + unsigned int khz = 0; + int err; + + if (!data) + return 0; + + smp_call_function_single(cpu, query_values_on_cpu, &err, true); + if (err) + goto out; + + khz = find_khz_freq_from_fid(data->currfid); + + +out: + return khz; +} + +static struct cpufreq_driver cpufreq_amd64_driver = { + .flags = CPUFREQ_ASYNC_NOTIFICATION, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernowk8_target, + .bios_limit = acpi_processor_get_bios_limit, + .init = powernowk8_cpu_init, + .exit = powernowk8_cpu_exit, + .get = powernowk8_get, + .name = "powernow-k8", + .attr = cpufreq_generic_attr, +}; + +static void __request_acpi_cpufreq(void) +{ + const char drv[] = "acpi-cpufreq"; + const char *cur_drv; + + cur_drv = cpufreq_get_current_driver(); + if (!cur_drv) + goto request; + + if (strncmp(cur_drv, drv, min_t(size_t, strlen(cur_drv), strlen(drv)))) + pr_warn("WTF driver: %s\n", cur_drv); + + return; + + request: + pr_warn("This CPU is not supported anymore, using acpi-cpufreq instead.\n"); + request_module(drv); +} + +/* driver entry point for init */ +static int powernowk8_init(void) +{ + unsigned int i, supported_cpus = 0; + int ret; + + if (!x86_match_cpu(powernow_k8_ids)) + return -ENODEV; + + if (boot_cpu_has(X86_FEATURE_HW_PSTATE)) { + __request_acpi_cpufreq(); + return -ENODEV; + } + + cpus_read_lock(); + for_each_online_cpu(i) { + smp_call_function_single(i, check_supported_cpu, &ret, 1); + if (!ret) + supported_cpus++; + } + + if (supported_cpus != num_online_cpus()) { + cpus_read_unlock(); + return -ENODEV; + } + cpus_read_unlock(); + + ret = cpufreq_register_driver(&cpufreq_amd64_driver); + if (ret) + return ret; + + pr_info("Found %d %s (%d cpu cores) (" VERSION ")\n", + num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); + + return ret; +} + +/* driver entry point for term */ +static void __exit powernowk8_exit(void) +{ + pr_debug("exit\n"); + + cpufreq_unregister_driver(&cpufreq_amd64_driver); +} + +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>"); +MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@amd.com>"); +MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); +MODULE_LICENSE("GPL"); + +late_initcall(powernowk8_init); +module_exit(powernowk8_exit); diff --git a/drivers/cpufreq/powernow-k8.h b/drivers/cpufreq/powernow-k8.h new file mode 100644 index 000000000..83331ceb6 --- /dev/null +++ b/drivers/cpufreq/powernow-k8.h @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * (c) 2003-2006 Advanced Micro Devices, Inc. + */ + +struct powernow_k8_data { + unsigned int cpu; + + u32 numps; /* number of p-states */ + u32 batps; /* number of p-states supported on battery */ + + /* these values are constant when the PSB is used to determine + * vid/fid pairings, but are modified during the ->target() call + * when ACPI is used */ + u32 rvo; /* ramp voltage offset */ + u32 irt; /* isochronous relief time */ + u32 vidmvs; /* usable value calculated from mvs */ + u32 vstable; /* voltage stabilization time, units 20 us */ + u32 plllock; /* pll lock time, units 1 us */ + u32 exttype; /* extended interface = 1 */ + + /* keep track of the current fid / vid or pstate */ + u32 currvid; + u32 currfid; + + /* the powernow_table includes all frequency and vid/fid pairings: + * fid are the lower 8 bits of the index, vid are the upper 8 bits. + * frequency is in kHz */ + struct cpufreq_frequency_table *powernow_table; + + /* the acpi table needs to be kept. it's only available if ACPI was + * used to determine valid frequency/vid/fid states */ + struct acpi_processor_performance acpi_data; + + /* we need to keep track of associated cores, but let cpufreq + * handle hotplug events - so just point at cpufreq pol->cpus + * structure */ + struct cpumask *available_cores; +}; + +/* processor's cpuid instruction support */ +#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */ +#define CPUID_XFAM 0x0ff00000 /* extended family */ +#define CPUID_XFAM_K8 0 +#define CPUID_XMOD 0x000f0000 /* extended model */ +#define CPUID_XMOD_REV_MASK 0x000c0000 +#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */ +#define CPUID_USE_XFAM_XMOD 0x00000f00 +#define CPUID_GET_MAX_CAPABILITIES 0x80000000 +#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 +#define P_STATE_TRANSITION_CAPABLE 6 + +/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ +/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */ +/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */ +/* the register number is placed in ecx, and the data is returned in edx:eax. */ + +#define MSR_FIDVID_CTL 0xc0010041 +#define MSR_FIDVID_STATUS 0xc0010042 + +/* Field definitions within the FID VID Low Control MSR : */ +#define MSR_C_LO_INIT_FID_VID 0x00010000 +#define MSR_C_LO_NEW_VID 0x00003f00 +#define MSR_C_LO_NEW_FID 0x0000003f +#define MSR_C_LO_VID_SHIFT 8 + +/* Field definitions within the FID VID High Control MSR : */ +#define MSR_C_HI_STP_GNT_TO 0x000fffff + +/* Field definitions within the FID VID Low Status MSR : */ +#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ +#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 +#define MSR_S_LO_MAX_FID 0x003f0000 +#define MSR_S_LO_START_FID 0x00003f00 +#define MSR_S_LO_CURRENT_FID 0x0000003f + +/* Field definitions within the FID VID High Status MSR : */ +#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 +#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 +#define MSR_S_HI_START_VID 0x00003f00 +#define MSR_S_HI_CURRENT_VID 0x0000003f +#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 + +/* + * There are restrictions frequencies have to follow: + * - only 1 entry in the low fid table ( <=1.4GHz ) + * - lowest entry in the high fid table must be >= 2 * the entry in the + * low fid table + * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry + * in the low fid table + * - the parts can only step at <= 200 MHz intervals, odd fid values are + * supported in revision G and later revisions. + * - lowest frequency must be >= interprocessor hypertransport link speed + * (only applies to MP systems obviously) + */ + +/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */ +#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */ +#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */ + +#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */ +#define HI_VCOFREQ_TABLE_BOTTOM 1600 + +#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ + +#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ +#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ + +#define MIN_FREQ 800 /* Min and max freqs, per spec */ +#define MAX_FREQ 5000 + +#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */ +#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ + +#define VID_OFF 0x3f + +#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ + +#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ + +#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ +#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */ + +/* + * Most values of interest are encoded in a single field of the _PSS + * entries: the "control" value. + */ + +#define IRT_SHIFT 30 +#define RVO_SHIFT 28 +#define EXT_TYPE_SHIFT 27 +#define PLL_L_SHIFT 20 +#define MVS_SHIFT 18 +#define VST_SHIFT 11 +#define VID_SHIFT 6 +#define IRT_MASK 3 +#define RVO_MASK 3 +#define EXT_TYPE_MASK 1 +#define PLL_L_MASK 0x7f +#define MVS_MASK 3 +#define VST_MASK 0x7f +#define VID_MASK 0x1f +#define FID_MASK 0x1f +#define EXT_VID_MASK 0x3f +#define EXT_FID_MASK 0x3f + + +/* + * Version 1.4 of the PSB table. This table is constructed by BIOS and is + * to tell the OS's power management driver which VIDs and FIDs are + * supported by this particular processor. + * If the data in the PSB / PST is wrong, then this driver will program the + * wrong values into hardware, which is very likely to lead to a crash. + */ + +#define PSB_ID_STRING "AMDK7PNOW!" +#define PSB_ID_STRING_LEN 10 + +#define PSB_VERSION_1_4 0x14 + +struct psb_s { + u8 signature[10]; + u8 tableversion; + u8 flags1; + u16 vstable; + u8 flags2; + u8 num_tables; + u32 cpuid; + u8 plllocktime; + u8 maxfid; + u8 maxvid; + u8 numps; +}; + +/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */ +struct pst_s { + u8 fid; + u8 vid; +}; + +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid, u32 regfid); +static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); +static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); + +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); + +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c new file mode 100644 index 000000000..fddbd1ea1 --- /dev/null +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -0,0 +1,1166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * POWERNV cpufreq driver for the IBM POWER processors + * + * (C) Copyright IBM 2014 + * + * Author: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com> + */ + +#define pr_fmt(fmt) "powernv-cpufreq: " fmt + +#include <linux/kernel.h> +#include <linux/sysfs.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/cpufreq.h> +#include <linux/smp.h> +#include <linux/of.h> +#include <linux/reboot.h> +#include <linux/slab.h> +#include <linux/cpu.h> +#include <linux/hashtable.h> +#include <trace/events/power.h> + +#include <asm/cputhreads.h> +#include <asm/firmware.h> +#include <asm/reg.h> +#include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */ +#include <asm/opal.h> +#include <linux/timer.h> + +#define POWERNV_MAX_PSTATES_ORDER 8 +#define POWERNV_MAX_PSTATES (1UL << (POWERNV_MAX_PSTATES_ORDER)) +#define PMSR_PSAFE_ENABLE (1UL << 30) +#define PMSR_SPR_EM_DISABLE (1UL << 31) +#define MAX_PSTATE_SHIFT 32 +#define LPSTATE_SHIFT 48 +#define GPSTATE_SHIFT 56 +#define MAX_NR_CHIPS 32 + +#define MAX_RAMP_DOWN_TIME 5120 +/* + * On an idle system we want the global pstate to ramp-down from max value to + * min over a span of ~5 secs. Also we want it to initially ramp-down slowly and + * then ramp-down rapidly later on. + * + * This gives a percentage rampdown for time elapsed in milliseconds. + * ramp_down_percentage = ((ms * ms) >> 18) + * ~= 3.8 * (sec * sec) + * + * At 0 ms ramp_down_percent = 0 + * At 5120 ms ramp_down_percent = 100 + */ +#define ramp_down_percent(time) ((time * time) >> 18) + +/* Interval after which the timer is queued to bring down global pstate */ +#define GPSTATE_TIMER_INTERVAL 2000 + +/** + * struct global_pstate_info - Per policy data structure to maintain history of + * global pstates + * @highest_lpstate_idx: The local pstate index from which we are + * ramping down + * @elapsed_time: Time in ms spent in ramping down from + * highest_lpstate_idx + * @last_sampled_time: Time from boot in ms when global pstates were + * last set + * @last_lpstate_idx: Last set value of local pstate and global + * @last_gpstate_idx: pstate in terms of cpufreq table index + * @timer: Is used for ramping down if cpu goes idle for + * a long time with global pstate held high + * @gpstate_lock: A spinlock to maintain synchronization between + * routines called by the timer handler and + * governer's target_index calls + * @policy: Associated CPUFreq policy + */ +struct global_pstate_info { + int highest_lpstate_idx; + unsigned int elapsed_time; + unsigned int last_sampled_time; + int last_lpstate_idx; + int last_gpstate_idx; + spinlock_t gpstate_lock; + struct timer_list timer; + struct cpufreq_policy *policy; +}; + +static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1]; + +static DEFINE_HASHTABLE(pstate_revmap, POWERNV_MAX_PSTATES_ORDER); +/** + * struct pstate_idx_revmap_data: Entry in the hashmap pstate_revmap + * indexed by a function of pstate id. + * + * @pstate_id: pstate id for this entry. + * + * @cpufreq_table_idx: Index into the powernv_freqs + * cpufreq_frequency_table for frequency + * corresponding to pstate_id. + * + * @hentry: hlist_node that hooks this entry into the pstate_revmap + * hashtable + */ +struct pstate_idx_revmap_data { + u8 pstate_id; + unsigned int cpufreq_table_idx; + struct hlist_node hentry; +}; + +static bool rebooting, throttled, occ_reset; + +static const char * const throttle_reason[] = { + "No throttling", + "Power Cap", + "Processor Over Temperature", + "Power Supply Failure", + "Over Current", + "OCC Reset" +}; + +enum throttle_reason_type { + NO_THROTTLE = 0, + POWERCAP, + CPU_OVERTEMP, + POWER_SUPPLY_FAILURE, + OVERCURRENT, + OCC_RESET_THROTTLE, + OCC_MAX_REASON +}; + +static struct chip { + unsigned int id; + bool throttled; + bool restore; + u8 throttle_reason; + cpumask_t mask; + struct work_struct throttle; + int throttle_turbo; + int throttle_sub_turbo; + int reason[OCC_MAX_REASON]; +} *chips; + +static int nr_chips; +static DEFINE_PER_CPU(struct chip *, chip_info); + +/* + * Note: + * The set of pstates consists of contiguous integers. + * powernv_pstate_info stores the index of the frequency table for + * max, min and nominal frequencies. It also stores number of + * available frequencies. + * + * powernv_pstate_info.nominal indicates the index to the highest + * non-turbo frequency. + */ +static struct powernv_pstate_info { + unsigned int min; + unsigned int max; + unsigned int nominal; + unsigned int nr_pstates; + bool wof_enabled; +} powernv_pstate_info; + +static inline u8 extract_pstate(u64 pmsr_val, unsigned int shift) +{ + return ((pmsr_val >> shift) & 0xFF); +} + +#define extract_local_pstate(x) extract_pstate(x, LPSTATE_SHIFT) +#define extract_global_pstate(x) extract_pstate(x, GPSTATE_SHIFT) +#define extract_max_pstate(x) extract_pstate(x, MAX_PSTATE_SHIFT) + +/* Use following functions for conversions between pstate_id and index */ + +/* + * idx_to_pstate : Returns the pstate id corresponding to the + * frequency in the cpufreq frequency table + * powernv_freqs indexed by @i. + * + * If @i is out of bound, this will return the pstate + * corresponding to the nominal frequency. + */ +static inline u8 idx_to_pstate(unsigned int i) +{ + if (unlikely(i >= powernv_pstate_info.nr_pstates)) { + pr_warn_once("idx_to_pstate: index %u is out of bound\n", i); + return powernv_freqs[powernv_pstate_info.nominal].driver_data; + } + + return powernv_freqs[i].driver_data; +} + +/* + * pstate_to_idx : Returns the index in the cpufreq frequencytable + * powernv_freqs for the frequency whose corresponding + * pstate id is @pstate. + * + * If no frequency corresponding to @pstate is found, + * this will return the index of the nominal + * frequency. + */ +static unsigned int pstate_to_idx(u8 pstate) +{ + unsigned int key = pstate % POWERNV_MAX_PSTATES; + struct pstate_idx_revmap_data *revmap_data; + + hash_for_each_possible(pstate_revmap, revmap_data, hentry, key) { + if (revmap_data->pstate_id == pstate) + return revmap_data->cpufreq_table_idx; + } + + pr_warn_once("pstate_to_idx: pstate 0x%x not found\n", pstate); + return powernv_pstate_info.nominal; +} + +static inline void reset_gpstates(struct cpufreq_policy *policy) +{ + struct global_pstate_info *gpstates = policy->driver_data; + + gpstates->highest_lpstate_idx = 0; + gpstates->elapsed_time = 0; + gpstates->last_sampled_time = 0; + gpstates->last_lpstate_idx = 0; + gpstates->last_gpstate_idx = 0; +} + +/* + * Initialize the freq table based on data obtained + * from the firmware passed via device-tree + */ +static int init_powernv_pstates(void) +{ + struct device_node *power_mgt; + int i, nr_pstates = 0; + const __be32 *pstate_ids, *pstate_freqs; + u32 len_ids, len_freqs; + u32 pstate_min, pstate_max, pstate_nominal; + u32 pstate_turbo, pstate_ultra_turbo; + int rc = -ENODEV; + + power_mgt = of_find_node_by_path("/ibm,opal/power-mgt"); + if (!power_mgt) { + pr_warn("power-mgt node not found\n"); + return -ENODEV; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-min", &pstate_min)) { + pr_warn("ibm,pstate-min node not found\n"); + goto out; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-max", &pstate_max)) { + pr_warn("ibm,pstate-max node not found\n"); + goto out; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-nominal", + &pstate_nominal)) { + pr_warn("ibm,pstate-nominal not found\n"); + goto out; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-ultra-turbo", + &pstate_ultra_turbo)) { + powernv_pstate_info.wof_enabled = false; + goto next; + } + + if (of_property_read_u32(power_mgt, "ibm,pstate-turbo", + &pstate_turbo)) { + powernv_pstate_info.wof_enabled = false; + goto next; + } + + if (pstate_turbo == pstate_ultra_turbo) + powernv_pstate_info.wof_enabled = false; + else + powernv_pstate_info.wof_enabled = true; + +next: + pr_info("cpufreq pstate min 0x%x nominal 0x%x max 0x%x\n", pstate_min, + pstate_nominal, pstate_max); + pr_info("Workload Optimized Frequency is %s in the platform\n", + (powernv_pstate_info.wof_enabled) ? "enabled" : "disabled"); + + pstate_ids = of_get_property(power_mgt, "ibm,pstate-ids", &len_ids); + if (!pstate_ids) { + pr_warn("ibm,pstate-ids not found\n"); + goto out; + } + + pstate_freqs = of_get_property(power_mgt, "ibm,pstate-frequencies-mhz", + &len_freqs); + if (!pstate_freqs) { + pr_warn("ibm,pstate-frequencies-mhz not found\n"); + goto out; + } + + if (len_ids != len_freqs) { + pr_warn("Entries in ibm,pstate-ids and " + "ibm,pstate-frequencies-mhz does not match\n"); + } + + nr_pstates = min(len_ids, len_freqs) / sizeof(u32); + if (!nr_pstates) { + pr_warn("No PStates found\n"); + goto out; + } + + powernv_pstate_info.nr_pstates = nr_pstates; + pr_debug("NR PStates %d\n", nr_pstates); + + for (i = 0; i < nr_pstates; i++) { + u32 id = be32_to_cpu(pstate_ids[i]); + u32 freq = be32_to_cpu(pstate_freqs[i]); + struct pstate_idx_revmap_data *revmap_data; + unsigned int key; + + pr_debug("PState id %d freq %d MHz\n", id, freq); + powernv_freqs[i].frequency = freq * 1000; /* kHz */ + powernv_freqs[i].driver_data = id & 0xFF; + + revmap_data = kmalloc(sizeof(*revmap_data), GFP_KERNEL); + if (!revmap_data) { + rc = -ENOMEM; + goto out; + } + + revmap_data->pstate_id = id & 0xFF; + revmap_data->cpufreq_table_idx = i; + key = (revmap_data->pstate_id) % POWERNV_MAX_PSTATES; + hash_add(pstate_revmap, &revmap_data->hentry, key); + + if (id == pstate_max) + powernv_pstate_info.max = i; + if (id == pstate_nominal) + powernv_pstate_info.nominal = i; + if (id == pstate_min) + powernv_pstate_info.min = i; + + if (powernv_pstate_info.wof_enabled && id == pstate_turbo) { + int j; + + for (j = i - 1; j >= (int)powernv_pstate_info.max; j--) + powernv_freqs[j].flags = CPUFREQ_BOOST_FREQ; + } + } + + /* End of list marker entry */ + powernv_freqs[i].frequency = CPUFREQ_TABLE_END; + + of_node_put(power_mgt); + return 0; +out: + of_node_put(power_mgt); + return rc; +} + +/* Returns the CPU frequency corresponding to the pstate_id. */ +static unsigned int pstate_id_to_freq(u8 pstate_id) +{ + int i; + + i = pstate_to_idx(pstate_id); + if (i >= powernv_pstate_info.nr_pstates || i < 0) { + pr_warn("PState id 0x%x outside of PState table, reporting nominal id 0x%x instead\n", + pstate_id, idx_to_pstate(powernv_pstate_info.nominal)); + i = powernv_pstate_info.nominal; + } + + return powernv_freqs[i].frequency; +} + +/* + * cpuinfo_nominal_freq_show - Show the nominal CPU frequency as indicated by + * the firmware + */ +static ssize_t cpuinfo_nominal_freq_show(struct cpufreq_policy *policy, + char *buf) +{ + return sprintf(buf, "%u\n", + powernv_freqs[powernv_pstate_info.nominal].frequency); +} + +static struct freq_attr cpufreq_freq_attr_cpuinfo_nominal_freq = + __ATTR_RO(cpuinfo_nominal_freq); + +#define SCALING_BOOST_FREQS_ATTR_INDEX 2 + +static struct freq_attr *powernv_cpu_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &cpufreq_freq_attr_cpuinfo_nominal_freq, + &cpufreq_freq_attr_scaling_boost_freqs, + NULL, +}; + +#define throttle_attr(name, member) \ +static ssize_t name##_show(struct cpufreq_policy *policy, char *buf) \ +{ \ + struct chip *chip = per_cpu(chip_info, policy->cpu); \ + \ + return sprintf(buf, "%u\n", chip->member); \ +} \ + \ +static struct freq_attr throttle_attr_##name = __ATTR_RO(name) \ + +throttle_attr(unthrottle, reason[NO_THROTTLE]); +throttle_attr(powercap, reason[POWERCAP]); +throttle_attr(overtemp, reason[CPU_OVERTEMP]); +throttle_attr(supply_fault, reason[POWER_SUPPLY_FAILURE]); +throttle_attr(overcurrent, reason[OVERCURRENT]); +throttle_attr(occ_reset, reason[OCC_RESET_THROTTLE]); +throttle_attr(turbo_stat, throttle_turbo); +throttle_attr(sub_turbo_stat, throttle_sub_turbo); + +static struct attribute *throttle_attrs[] = { + &throttle_attr_unthrottle.attr, + &throttle_attr_powercap.attr, + &throttle_attr_overtemp.attr, + &throttle_attr_supply_fault.attr, + &throttle_attr_overcurrent.attr, + &throttle_attr_occ_reset.attr, + &throttle_attr_turbo_stat.attr, + &throttle_attr_sub_turbo_stat.attr, + NULL, +}; + +static const struct attribute_group throttle_attr_grp = { + .name = "throttle_stats", + .attrs = throttle_attrs, +}; + +/* Helper routines */ + +/* Access helpers to power mgt SPR */ + +static inline unsigned long get_pmspr(unsigned long sprn) +{ + switch (sprn) { + case SPRN_PMCR: + return mfspr(SPRN_PMCR); + + case SPRN_PMICR: + return mfspr(SPRN_PMICR); + + case SPRN_PMSR: + return mfspr(SPRN_PMSR); + } + BUG(); +} + +static inline void set_pmspr(unsigned long sprn, unsigned long val) +{ + switch (sprn) { + case SPRN_PMCR: + mtspr(SPRN_PMCR, val); + return; + + case SPRN_PMICR: + mtspr(SPRN_PMICR, val); + return; + } + BUG(); +} + +/* + * Use objects of this type to query/update + * pstates on a remote CPU via smp_call_function. + */ +struct powernv_smp_call_data { + unsigned int freq; + u8 pstate_id; + u8 gpstate_id; +}; + +/* + * powernv_read_cpu_freq: Reads the current frequency on this CPU. + * + * Called via smp_call_function. + * + * Note: The caller of the smp_call_function should pass an argument of + * the type 'struct powernv_smp_call_data *' along with this function. + * + * The current frequency on this CPU will be returned via + * ((struct powernv_smp_call_data *)arg)->freq; + */ +static void powernv_read_cpu_freq(void *arg) +{ + unsigned long pmspr_val; + struct powernv_smp_call_data *freq_data = arg; + + pmspr_val = get_pmspr(SPRN_PMSR); + freq_data->pstate_id = extract_local_pstate(pmspr_val); + freq_data->freq = pstate_id_to_freq(freq_data->pstate_id); + + pr_debug("cpu %d pmsr %016lX pstate_id 0x%x frequency %d kHz\n", + raw_smp_processor_id(), pmspr_val, freq_data->pstate_id, + freq_data->freq); +} + +/* + * powernv_cpufreq_get: Returns the CPU frequency as reported by the + * firmware for CPU 'cpu'. This value is reported through the sysfs + * file cpuinfo_cur_freq. + */ +static unsigned int powernv_cpufreq_get(unsigned int cpu) +{ + struct powernv_smp_call_data freq_data; + + smp_call_function_any(cpu_sibling_mask(cpu), powernv_read_cpu_freq, + &freq_data, 1); + + return freq_data.freq; +} + +/* + * set_pstate: Sets the pstate on this CPU. + * + * This is called via an smp_call_function. + * + * The caller must ensure that freq_data is of the type + * (struct powernv_smp_call_data *) and the pstate_id which needs to be set + * on this CPU should be present in freq_data->pstate_id. + */ +static void set_pstate(void *data) +{ + unsigned long val; + struct powernv_smp_call_data *freq_data = data; + unsigned long pstate_ul = freq_data->pstate_id; + unsigned long gpstate_ul = freq_data->gpstate_id; + + val = get_pmspr(SPRN_PMCR); + val = val & 0x0000FFFFFFFFFFFFULL; + + pstate_ul = pstate_ul & 0xFF; + gpstate_ul = gpstate_ul & 0xFF; + + /* Set both global(bits 56..63) and local(bits 48..55) PStates */ + val = val | (gpstate_ul << 56) | (pstate_ul << 48); + + pr_debug("Setting cpu %d pmcr to %016lX\n", + raw_smp_processor_id(), val); + set_pmspr(SPRN_PMCR, val); +} + +/* + * get_nominal_index: Returns the index corresponding to the nominal + * pstate in the cpufreq table + */ +static inline unsigned int get_nominal_index(void) +{ + return powernv_pstate_info.nominal; +} + +static void powernv_cpufreq_throttle_check(void *data) +{ + struct chip *chip; + unsigned int cpu = smp_processor_id(); + unsigned long pmsr; + u8 pmsr_pmax; + unsigned int pmsr_pmax_idx; + + pmsr = get_pmspr(SPRN_PMSR); + chip = this_cpu_read(chip_info); + + /* Check for Pmax Capping */ + pmsr_pmax = extract_max_pstate(pmsr); + pmsr_pmax_idx = pstate_to_idx(pmsr_pmax); + if (pmsr_pmax_idx != powernv_pstate_info.max) { + if (chip->throttled) + goto next; + chip->throttled = true; + if (pmsr_pmax_idx > powernv_pstate_info.nominal) { + pr_warn_once("CPU %d on Chip %u has Pmax(0x%x) reduced below that of nominal frequency(0x%x)\n", + cpu, chip->id, pmsr_pmax, + idx_to_pstate(powernv_pstate_info.nominal)); + chip->throttle_sub_turbo++; + } else { + chip->throttle_turbo++; + } + trace_powernv_throttle(chip->id, + throttle_reason[chip->throttle_reason], + pmsr_pmax); + } else if (chip->throttled) { + chip->throttled = false; + trace_powernv_throttle(chip->id, + throttle_reason[chip->throttle_reason], + pmsr_pmax); + } + + /* Check if Psafe_mode_active is set in PMSR. */ +next: + if (pmsr & PMSR_PSAFE_ENABLE) { + throttled = true; + pr_info("Pstate set to safe frequency\n"); + } + + /* Check if SPR_EM_DISABLE is set in PMSR */ + if (pmsr & PMSR_SPR_EM_DISABLE) { + throttled = true; + pr_info("Frequency Control disabled from OS\n"); + } + + if (throttled) { + pr_info("PMSR = %16lx\n", pmsr); + pr_warn("CPU Frequency could be throttled\n"); + } +} + +/** + * calc_global_pstate - Calculate global pstate + * @elapsed_time: Elapsed time in milliseconds + * @local_pstate_idx: New local pstate + * @highest_lpstate_idx: pstate from which its ramping down + * + * Finds the appropriate global pstate based on the pstate from which its + * ramping down and the time elapsed in ramping down. It follows a quadratic + * equation which ensures that it reaches ramping down to pmin in 5sec. + */ +static inline int calc_global_pstate(unsigned int elapsed_time, + int highest_lpstate_idx, + int local_pstate_idx) +{ + int index_diff; + + /* + * Using ramp_down_percent we get the percentage of rampdown + * that we are expecting to be dropping. Difference between + * highest_lpstate_idx and powernv_pstate_info.min will give a absolute + * number of how many pstates we will drop eventually by the end of + * 5 seconds, then just scale it get the number pstates to be dropped. + */ + index_diff = ((int)ramp_down_percent(elapsed_time) * + (powernv_pstate_info.min - highest_lpstate_idx)) / 100; + + /* Ensure that global pstate is >= to local pstate */ + if (highest_lpstate_idx + index_diff >= local_pstate_idx) + return local_pstate_idx; + else + return highest_lpstate_idx + index_diff; +} + +static inline void queue_gpstate_timer(struct global_pstate_info *gpstates) +{ + unsigned int timer_interval; + + /* + * Setting up timer to fire after GPSTATE_TIMER_INTERVAL ms, But + * if it exceeds MAX_RAMP_DOWN_TIME ms for ramp down time. + * Set timer such that it fires exactly at MAX_RAMP_DOWN_TIME + * seconds of ramp down time. + */ + if ((gpstates->elapsed_time + GPSTATE_TIMER_INTERVAL) + > MAX_RAMP_DOWN_TIME) + timer_interval = MAX_RAMP_DOWN_TIME - gpstates->elapsed_time; + else + timer_interval = GPSTATE_TIMER_INTERVAL; + + mod_timer(&gpstates->timer, jiffies + msecs_to_jiffies(timer_interval)); +} + +/** + * gpstate_timer_handler + * + * @t: Timer context used to fetch global pstate info struct + * + * This handler brings down the global pstate closer to the local pstate + * according quadratic equation. Queues a new timer if it is still not equal + * to local pstate + */ +static void gpstate_timer_handler(struct timer_list *t) +{ + struct global_pstate_info *gpstates = from_timer(gpstates, t, timer); + struct cpufreq_policy *policy = gpstates->policy; + int gpstate_idx, lpstate_idx; + unsigned long val; + unsigned int time_diff = jiffies_to_msecs(jiffies) + - gpstates->last_sampled_time; + struct powernv_smp_call_data freq_data; + + if (!spin_trylock(&gpstates->gpstate_lock)) + return; + /* + * If the timer has migrated to the different cpu then bring + * it back to one of the policy->cpus + */ + if (!cpumask_test_cpu(raw_smp_processor_id(), policy->cpus)) { + gpstates->timer.expires = jiffies + msecs_to_jiffies(1); + add_timer_on(&gpstates->timer, cpumask_first(policy->cpus)); + spin_unlock(&gpstates->gpstate_lock); + return; + } + + /* + * If PMCR was last updated was using fast_swtich then + * We may have wrong in gpstate->last_lpstate_idx + * value. Hence, read from PMCR to get correct data. + */ + val = get_pmspr(SPRN_PMCR); + freq_data.gpstate_id = extract_global_pstate(val); + freq_data.pstate_id = extract_local_pstate(val); + if (freq_data.gpstate_id == freq_data.pstate_id) { + reset_gpstates(policy); + spin_unlock(&gpstates->gpstate_lock); + return; + } + + gpstates->last_sampled_time += time_diff; + gpstates->elapsed_time += time_diff; + + if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) { + gpstate_idx = pstate_to_idx(freq_data.pstate_id); + lpstate_idx = gpstate_idx; + reset_gpstates(policy); + gpstates->highest_lpstate_idx = gpstate_idx; + } else { + lpstate_idx = pstate_to_idx(freq_data.pstate_id); + gpstate_idx = calc_global_pstate(gpstates->elapsed_time, + gpstates->highest_lpstate_idx, + lpstate_idx); + } + freq_data.gpstate_id = idx_to_pstate(gpstate_idx); + gpstates->last_gpstate_idx = gpstate_idx; + gpstates->last_lpstate_idx = lpstate_idx; + /* + * If local pstate is equal to global pstate, rampdown is over + * So timer is not required to be queued. + */ + if (gpstate_idx != gpstates->last_lpstate_idx) + queue_gpstate_timer(gpstates); + + set_pstate(&freq_data); + spin_unlock(&gpstates->gpstate_lock); +} + +/* + * powernv_cpufreq_target_index: Sets the frequency corresponding to + * the cpufreq table entry indexed by new_index on the cpus in the + * mask policy->cpus + */ +static int powernv_cpufreq_target_index(struct cpufreq_policy *policy, + unsigned int new_index) +{ + struct powernv_smp_call_data freq_data; + unsigned int cur_msec, gpstate_idx; + struct global_pstate_info *gpstates = policy->driver_data; + + if (unlikely(rebooting) && new_index != get_nominal_index()) + return 0; + + if (!throttled) { + /* we don't want to be preempted while + * checking if the CPU frequency has been throttled + */ + preempt_disable(); + powernv_cpufreq_throttle_check(NULL); + preempt_enable(); + } + + cur_msec = jiffies_to_msecs(get_jiffies_64()); + + freq_data.pstate_id = idx_to_pstate(new_index); + if (!gpstates) { + freq_data.gpstate_id = freq_data.pstate_id; + goto no_gpstate; + } + + spin_lock(&gpstates->gpstate_lock); + + if (!gpstates->last_sampled_time) { + gpstate_idx = new_index; + gpstates->highest_lpstate_idx = new_index; + goto gpstates_done; + } + + if (gpstates->last_gpstate_idx < new_index) { + gpstates->elapsed_time += cur_msec - + gpstates->last_sampled_time; + + /* + * If its has been ramping down for more than MAX_RAMP_DOWN_TIME + * we should be resetting all global pstate related data. Set it + * equal to local pstate to start fresh. + */ + if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) { + reset_gpstates(policy); + gpstates->highest_lpstate_idx = new_index; + gpstate_idx = new_index; + } else { + /* Elaspsed_time is less than 5 seconds, continue to rampdown */ + gpstate_idx = calc_global_pstate(gpstates->elapsed_time, + gpstates->highest_lpstate_idx, + new_index); + } + } else { + reset_gpstates(policy); + gpstates->highest_lpstate_idx = new_index; + gpstate_idx = new_index; + } + + /* + * If local pstate is equal to global pstate, rampdown is over + * So timer is not required to be queued. + */ + if (gpstate_idx != new_index) + queue_gpstate_timer(gpstates); + else + del_timer_sync(&gpstates->timer); + +gpstates_done: + freq_data.gpstate_id = idx_to_pstate(gpstate_idx); + gpstates->last_sampled_time = cur_msec; + gpstates->last_gpstate_idx = gpstate_idx; + gpstates->last_lpstate_idx = new_index; + + spin_unlock(&gpstates->gpstate_lock); + +no_gpstate: + /* + * Use smp_call_function to send IPI and execute the + * mtspr on target CPU. We could do that without IPI + * if current CPU is within policy->cpus (core) + */ + smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1); + return 0; +} + +static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int base, i; + struct kernfs_node *kn; + struct global_pstate_info *gpstates; + + base = cpu_first_thread_sibling(policy->cpu); + + for (i = 0; i < threads_per_core; i++) + cpumask_set_cpu(base + i, policy->cpus); + + kn = kernfs_find_and_get(policy->kobj.sd, throttle_attr_grp.name); + if (!kn) { + int ret; + + ret = sysfs_create_group(&policy->kobj, &throttle_attr_grp); + if (ret) { + pr_info("Failed to create throttle stats directory for cpu %d\n", + policy->cpu); + return ret; + } + } else { + kernfs_put(kn); + } + + policy->freq_table = powernv_freqs; + policy->fast_switch_possible = true; + + if (pvr_version_is(PVR_POWER9)) + return 0; + + /* Initialise Gpstate ramp-down timer only on POWER8 */ + gpstates = kzalloc(sizeof(*gpstates), GFP_KERNEL); + if (!gpstates) + return -ENOMEM; + + policy->driver_data = gpstates; + + /* initialize timer */ + gpstates->policy = policy; + timer_setup(&gpstates->timer, gpstate_timer_handler, + TIMER_PINNED | TIMER_DEFERRABLE); + gpstates->timer.expires = jiffies + + msecs_to_jiffies(GPSTATE_TIMER_INTERVAL); + spin_lock_init(&gpstates->gpstate_lock); + + return 0; +} + +static int powernv_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct powernv_smp_call_data freq_data; + struct global_pstate_info *gpstates = policy->driver_data; + + freq_data.pstate_id = idx_to_pstate(powernv_pstate_info.min); + freq_data.gpstate_id = idx_to_pstate(powernv_pstate_info.min); + smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1); + if (gpstates) + del_timer_sync(&gpstates->timer); + + kfree(policy->driver_data); + + return 0; +} + +static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb, + unsigned long action, void *unused) +{ + int cpu; + struct cpufreq_policy *cpu_policy; + + rebooting = true; + for_each_online_cpu(cpu) { + cpu_policy = cpufreq_cpu_get(cpu); + if (!cpu_policy) + continue; + powernv_cpufreq_target_index(cpu_policy, get_nominal_index()); + cpufreq_cpu_put(cpu_policy); + } + + return NOTIFY_DONE; +} + +static struct notifier_block powernv_cpufreq_reboot_nb = { + .notifier_call = powernv_cpufreq_reboot_notifier, +}; + +static void powernv_cpufreq_work_fn(struct work_struct *work) +{ + struct chip *chip = container_of(work, struct chip, throttle); + struct cpufreq_policy *policy; + unsigned int cpu; + cpumask_t mask; + + cpus_read_lock(); + cpumask_and(&mask, &chip->mask, cpu_online_mask); + smp_call_function_any(&mask, + powernv_cpufreq_throttle_check, NULL, 0); + + if (!chip->restore) + goto out; + + chip->restore = false; + for_each_cpu(cpu, &mask) { + int index; + + policy = cpufreq_cpu_get(cpu); + if (!policy) + continue; + index = cpufreq_table_find_index_c(policy, policy->cur, false); + powernv_cpufreq_target_index(policy, index); + cpumask_andnot(&mask, &mask, policy->cpus); + cpufreq_cpu_put(policy); + } +out: + cpus_read_unlock(); +} + +static int powernv_cpufreq_occ_msg(struct notifier_block *nb, + unsigned long msg_type, void *_msg) +{ + struct opal_msg *msg = _msg; + struct opal_occ_msg omsg; + int i; + + if (msg_type != OPAL_MSG_OCC) + return 0; + + omsg.type = be64_to_cpu(msg->params[0]); + + switch (omsg.type) { + case OCC_RESET: + occ_reset = true; + pr_info("OCC (On Chip Controller - enforces hard thermal/power limits) Resetting\n"); + /* + * powernv_cpufreq_throttle_check() is called in + * target() callback which can detect the throttle state + * for governors like ondemand. + * But static governors will not call target() often thus + * report throttling here. + */ + if (!throttled) { + throttled = true; + pr_warn("CPU frequency is throttled for duration\n"); + } + + break; + case OCC_LOAD: + pr_info("OCC Loading, CPU frequency is throttled until OCC is started\n"); + break; + case OCC_THROTTLE: + omsg.chip = be64_to_cpu(msg->params[1]); + omsg.throttle_status = be64_to_cpu(msg->params[2]); + + if (occ_reset) { + occ_reset = false; + throttled = false; + pr_info("OCC Active, CPU frequency is no longer throttled\n"); + + for (i = 0; i < nr_chips; i++) { + chips[i].restore = true; + schedule_work(&chips[i].throttle); + } + + return 0; + } + + for (i = 0; i < nr_chips; i++) + if (chips[i].id == omsg.chip) + break; + + if (omsg.throttle_status >= 0 && + omsg.throttle_status <= OCC_MAX_THROTTLE_STATUS) { + chips[i].throttle_reason = omsg.throttle_status; + chips[i].reason[omsg.throttle_status]++; + } + + if (!omsg.throttle_status) + chips[i].restore = true; + + schedule_work(&chips[i].throttle); + } + return 0; +} + +static struct notifier_block powernv_cpufreq_opal_nb = { + .notifier_call = powernv_cpufreq_occ_msg, + .next = NULL, + .priority = 0, +}; + +static unsigned int powernv_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + int index; + struct powernv_smp_call_data freq_data; + + index = cpufreq_table_find_index_dl(policy, target_freq, false); + freq_data.pstate_id = powernv_freqs[index].driver_data; + freq_data.gpstate_id = powernv_freqs[index].driver_data; + set_pstate(&freq_data); + + return powernv_freqs[index].frequency; +} + +static struct cpufreq_driver powernv_cpufreq_driver = { + .name = "powernv-cpufreq", + .flags = CPUFREQ_CONST_LOOPS, + .init = powernv_cpufreq_cpu_init, + .exit = powernv_cpufreq_cpu_exit, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernv_cpufreq_target_index, + .fast_switch = powernv_fast_switch, + .get = powernv_cpufreq_get, + .attr = powernv_cpu_freq_attr, +}; + +static int init_chip_info(void) +{ + unsigned int *chip; + unsigned int cpu, i; + unsigned int prev_chip_id = UINT_MAX; + cpumask_t *chip_cpu_mask; + int ret = 0; + + chip = kcalloc(num_possible_cpus(), sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + /* Allocate a chip cpu mask large enough to fit mask for all chips */ + chip_cpu_mask = kcalloc(MAX_NR_CHIPS, sizeof(cpumask_t), GFP_KERNEL); + if (!chip_cpu_mask) { + ret = -ENOMEM; + goto free_and_return; + } + + for_each_possible_cpu(cpu) { + unsigned int id = cpu_to_chip_id(cpu); + + if (prev_chip_id != id) { + prev_chip_id = id; + chip[nr_chips++] = id; + } + cpumask_set_cpu(cpu, &chip_cpu_mask[nr_chips-1]); + } + + chips = kcalloc(nr_chips, sizeof(struct chip), GFP_KERNEL); + if (!chips) { + ret = -ENOMEM; + goto out_free_chip_cpu_mask; + } + + for (i = 0; i < nr_chips; i++) { + chips[i].id = chip[i]; + cpumask_copy(&chips[i].mask, &chip_cpu_mask[i]); + INIT_WORK(&chips[i].throttle, powernv_cpufreq_work_fn); + for_each_cpu(cpu, &chips[i].mask) + per_cpu(chip_info, cpu) = &chips[i]; + } + +out_free_chip_cpu_mask: + kfree(chip_cpu_mask); +free_and_return: + kfree(chip); + return ret; +} + +static inline void clean_chip_info(void) +{ + int i; + + /* flush any pending work items */ + if (chips) + for (i = 0; i < nr_chips; i++) + cancel_work_sync(&chips[i].throttle); + kfree(chips); +} + +static inline void unregister_all_notifiers(void) +{ + opal_message_notifier_unregister(OPAL_MSG_OCC, + &powernv_cpufreq_opal_nb); + unregister_reboot_notifier(&powernv_cpufreq_reboot_nb); +} + +static int __init powernv_cpufreq_init(void) +{ + int rc = 0; + + /* Don't probe on pseries (guest) platforms */ + if (!firmware_has_feature(FW_FEATURE_OPAL)) + return -ENODEV; + + /* Discover pstates from device tree and init */ + rc = init_powernv_pstates(); + if (rc) + goto out; + + /* Populate chip info */ + rc = init_chip_info(); + if (rc) + goto out; + + if (powernv_pstate_info.wof_enabled) + powernv_cpufreq_driver.boost_enabled = true; + else + powernv_cpu_freq_attr[SCALING_BOOST_FREQS_ATTR_INDEX] = NULL; + + rc = cpufreq_register_driver(&powernv_cpufreq_driver); + if (rc) { + pr_info("Failed to register the cpufreq driver (%d)\n", rc); + goto cleanup; + } + + if (powernv_pstate_info.wof_enabled) + cpufreq_enable_boost_support(); + + register_reboot_notifier(&powernv_cpufreq_reboot_nb); + opal_message_notifier_register(OPAL_MSG_OCC, &powernv_cpufreq_opal_nb); + + return 0; +cleanup: + clean_chip_info(); +out: + pr_info("Platform driver disabled. System does not support PState control\n"); + return rc; +} +module_init(powernv_cpufreq_init); + +static void __exit powernv_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&powernv_cpufreq_driver); + unregister_all_notifiers(); + clean_chip_info(); +} +module_exit(powernv_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>"); diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c new file mode 100644 index 000000000..e3313ce63 --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * cpufreq driver for the cell processor + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + */ + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/cell-regs.h> + +#include "ppc_cbe_cpufreq.h" + +/* the CBE supports an 8 step frequency scaling */ +static struct cpufreq_frequency_table cbe_freqs[] = { + {0, 1, 0}, + {0, 2, 0}, + {0, 3, 0}, + {0, 4, 0}, + {0, 5, 0}, + {0, 6, 0}, + {0, 8, 0}, + {0, 10, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* + * hardware specific functions + */ + +static int set_pmode(unsigned int cpu, unsigned int slow_mode) +{ + int rc; + + if (cbe_cpufreq_has_pmi) + rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); + else + rc = cbe_cpufreq_set_pmode(cpu, slow_mode); + + pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); + + return rc; +} + +/* + * cpufreq functions + */ + +static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos; + const u32 *max_freqp; + u32 max_freq; + int cur_pmode; + struct device_node *cpu; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + return -ENODEV; + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + /* + * Let's check we can actually get to the CELL regs + */ + if (!cbe_get_cpu_pmd_regs(policy->cpu) || + !cbe_get_cpu_mic_tm_regs(policy->cpu)) { + pr_info("invalid CBE regs pointers for cpufreq\n"); + of_node_put(cpu); + return -EINVAL; + } + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + + of_node_put(cpu); + + if (!max_freqp) + return -EINVAL; + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + cpufreq_for_each_entry(pos, cbe_freqs) { + pos->frequency = max_freq / pos->driver_data; + pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency); + } + + /* if DEBUG is enabled set_pmode() measures the latency + * of a transition */ + policy->cpuinfo.transition_latency = 25000; + + cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); + pr_debug("current pmode is at %d\n",cur_pmode); + + policy->cur = cbe_freqs[cur_pmode].frequency; + +#ifdef CONFIG_SMP + cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); +#endif + + policy->freq_table = cbe_freqs; + cbe_cpufreq_pmi_policy_init(policy); + return 0; +} + +static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + cbe_cpufreq_pmi_policy_exit(policy); + return 0; +} + +static int cbe_cpufreq_target(struct cpufreq_policy *policy, + unsigned int cbe_pmode_new) +{ + pr_debug("setting frequency for cpu %d to %d kHz, " \ + "1/%d of max frequency\n", + policy->cpu, + cbe_freqs[cbe_pmode_new].frequency, + cbe_freqs[cbe_pmode_new].driver_data); + + return set_pmode(policy->cpu, cbe_pmode_new); +} + +static struct cpufreq_driver cbe_cpufreq_driver = { + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cbe_cpufreq_target, + .init = cbe_cpufreq_cpu_init, + .exit = cbe_cpufreq_cpu_exit, + .name = "cbe-cpufreq", + .flags = CPUFREQ_CONST_LOOPS, +}; + +/* + * module init and destoy + */ + +static int __init cbe_cpufreq_init(void) +{ + int ret; + + if (!machine_is(cell)) + return -ENODEV; + + cbe_cpufreq_pmi_init(); + + ret = cpufreq_register_driver(&cbe_cpufreq_driver); + if (ret) + cbe_cpufreq_pmi_exit(); + + return ret; +} + +static void __exit cbe_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&cbe_cpufreq_driver); + cbe_cpufreq_pmi_exit(); +} + +module_init(cbe_cpufreq_init); +module_exit(cbe_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h new file mode 100644 index 000000000..00cd8633b --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ppc_cbe_cpufreq.h + * + * This file contains the definitions used by the cbe_cpufreq driver. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + * + */ + +#include <linux/cpufreq.h> +#include <linux/types.h> + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode); +int cbe_cpufreq_get_pmode(int cpu); + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode); + +#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI) +extern bool cbe_cpufreq_has_pmi; +void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy); +void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy); +void cbe_cpufreq_pmi_init(void); +void cbe_cpufreq_pmi_exit(void); +#else +#define cbe_cpufreq_has_pmi (0) +static inline void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy) {} +static inline void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy) {} +static inline void cbe_cpufreq_pmi_init(void) {} +static inline void cbe_cpufreq_pmi_exit(void) {} +#endif diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c new file mode 100644 index 000000000..04830cd95 --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq_pervasive.c @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * pervasive backend for the cbe_cpufreq driver + * + * This driver makes use of the pervasive unit to + * engage the desired frequency. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <asm/machdep.h> +#include <asm/hw_irq.h> +#include <asm/cell-regs.h> + +#include "ppc_cbe_cpufreq.h" + +/* to write to MIC register */ +static u64 MIC_Slow_Fast_Timer_table[] = { + [0 ... 7] = 0x007fc00000000000ull, +}; + +/* more values for the MIC */ +static u64 MIC_Slow_Next_Timer_table[] = { + 0x0000240000000000ull, + 0x0000268000000000ull, + 0x000029C000000000ull, + 0x00002D0000000000ull, + 0x0000300000000000ull, + 0x0000334000000000ull, + 0x000039C000000000ull, + 0x00003FC000000000ull, +}; + + +int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode) +{ + struct cbe_pmd_regs __iomem *pmd_regs; + struct cbe_mic_tm_regs __iomem *mic_tm_regs; + unsigned long flags; + u64 value; +#ifdef DEBUG + long time; +#endif + + local_irq_save(flags); + + mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + +#ifdef DEBUG + time = jiffies; +#endif + + out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); + + out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); + out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); + + value = in_be64(&pmd_regs->pmcr); + /* set bits to zero */ + value &= 0xFFFFFFFFFFFFFFF8ull; + /* set bits to next pmode */ + value |= pmode; + + out_be64(&pmd_regs->pmcr, value); + +#ifdef DEBUG + /* wait until new pmode appears in status register */ + value = in_be64(&pmd_regs->pmsr) & 0x07; + while (value != pmode) { + cpu_relax(); + value = in_be64(&pmd_regs->pmsr) & 0x07; + } + + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "pervasive unit\n", time); +#endif + local_irq_restore(flags); + + return 0; +} + + +int cbe_cpufreq_get_pmode(int cpu) +{ + int ret; + struct cbe_pmd_regs __iomem *pmd_regs; + + pmd_regs = cbe_get_cpu_pmd_regs(cpu); + ret = in_be64(&pmd_regs->pmsr) & 0x07; + + return ret; +} + diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c new file mode 100644 index 000000000..4fba3637b --- /dev/null +++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * pmi backend for the cbe_cpufreq driver + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 + * + * Author: Christian Krafft <krafft@de.ibm.com> + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/pm_qos.h> +#include <linux/slab.h> + +#include <asm/processor.h> +#include <asm/pmi.h> +#include <asm/cell-regs.h> + +#ifdef DEBUG +#include <asm/time.h> +#endif + +#include "ppc_cbe_cpufreq.h" + +bool cbe_cpufreq_has_pmi = false; +EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi); + +/* + * hardware specific functions + */ + +int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode) +{ + int ret; + pmi_message_t pmi_msg; +#ifdef DEBUG + long time; +#endif + pmi_msg.type = PMI_TYPE_FREQ_CHANGE; + pmi_msg.data1 = cbe_cpu_to_node(cpu); + pmi_msg.data2 = pmode; + +#ifdef DEBUG + time = jiffies; +#endif + pmi_send_message(pmi_msg); + +#ifdef DEBUG + time = jiffies - time; + time = jiffies_to_msecs(time); + pr_debug("had to wait %lu ms for a transition using " \ + "PMI\n", time); +#endif + ret = pmi_msg.data2; + pr_debug("PMI returned slow mode %d\n", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi); + + +static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg) +{ + struct cpufreq_policy *policy; + struct freq_qos_request *req; + u8 node, slow_mode; + int cpu, ret; + + BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); + + node = pmi_msg.data1; + slow_mode = pmi_msg.data2; + + cpu = cbe_node_to_cpu(node); + + pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode); + + policy = cpufreq_cpu_get(cpu); + if (!policy) { + pr_warn("cpufreq policy not found cpu%d\n", cpu); + return; + } + + req = policy->driver_data; + + ret = freq_qos_update_request(req, + policy->freq_table[slow_mode].frequency); + if (ret < 0) + pr_warn("Failed to update freq constraint: %d\n", ret); + else + pr_debug("limiting node %d to slow mode %d\n", node, slow_mode); + + cpufreq_cpu_put(policy); +} + +static struct pmi_handler cbe_pmi_handler = { + .type = PMI_TYPE_FREQ_CHANGE, + .handle_pmi_message = cbe_cpufreq_handle_pmi, +}; + +void cbe_cpufreq_pmi_policy_init(struct cpufreq_policy *policy) +{ + struct freq_qos_request *req; + int ret; + + if (!cbe_cpufreq_has_pmi) + return; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return; + + ret = freq_qos_add_request(&policy->constraints, req, FREQ_QOS_MAX, + policy->freq_table[0].frequency); + if (ret < 0) { + pr_err("Failed to add freq constraint (%d)\n", ret); + kfree(req); + return; + } + + policy->driver_data = req; +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_init); + +void cbe_cpufreq_pmi_policy_exit(struct cpufreq_policy *policy) +{ + struct freq_qos_request *req = policy->driver_data; + + if (cbe_cpufreq_has_pmi) { + freq_qos_remove_request(req); + kfree(req); + } +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_policy_exit); + +void cbe_cpufreq_pmi_init(void) +{ + if (!pmi_register_handler(&cbe_pmi_handler)) + cbe_cpufreq_has_pmi = true; +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_init); + +void cbe_cpufreq_pmi_exit(void) +{ + pmi_unregister_handler(&cbe_pmi_handler); + cbe_cpufreq_has_pmi = false; +} +EXPORT_SYMBOL_GPL(cbe_cpufreq_pmi_exit); diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c new file mode 100644 index 000000000..ed1ae061a --- /dev/null +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2002,2003 Intrinsyc Software + * + * History: + * 31-Jul-2002 : Initial version [FB] + * 29-Jan-2003 : added PXA255 support [FB] + * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) + * + * Note: + * This driver may change the memory bus clock rate, but will not do any + * platform specific access timing changes... for example if you have flash + * memory connected to CS0, you will need to register a platform specific + * notifier which will adjust the memory access strobes to maintain a + * minimum strobe width. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/io.h> + +#ifdef DEBUG +static unsigned int freq_debug; +module_param(freq_debug, uint, 0); +MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); +#else +#define freq_debug 0 +#endif + +static struct regulator *vcc_core; + +static unsigned int pxa27x_maxfreq; +module_param(pxa27x_maxfreq, uint, 0); +MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" + "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)"); + +struct pxa_cpufreq_data { + struct clk *clk_core; +}; +static struct pxa_cpufreq_data pxa_cpufreq_data; + +struct pxa_freqs { + unsigned int khz; + int vmin; + int vmax; +}; + +/* + * PXA255 definitions + */ +static const struct pxa_freqs pxa255_run_freqs[] = +{ + /* CPU MEMBUS run turbo PXbus SDRAM */ + { 99500, -1, -1}, /* 99, 99, 50, 50 */ + {132700, -1, -1}, /* 133, 133, 66, 66 */ + {199100, -1, -1}, /* 199, 199, 99, 99 */ + {265400, -1, -1}, /* 265, 265, 133, 66 */ + {331800, -1, -1}, /* 331, 331, 166, 83 */ + {398100, -1, -1}, /* 398, 398, 196, 99 */ +}; + +/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ +static const struct pxa_freqs pxa255_turbo_freqs[] = +{ + /* CPU run turbo PXbus SDRAM */ + { 99500, -1, -1}, /* 99, 99, 50, 50 */ + {199100, -1, -1}, /* 99, 199, 50, 99 */ + {298500, -1, -1}, /* 99, 287, 50, 99 */ + {298600, -1, -1}, /* 199, 287, 99, 99 */ + {398100, -1, -1}, /* 199, 398, 99, 99 */ +}; + +#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) +#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) + +static struct cpufreq_frequency_table + pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1]; +static struct cpufreq_frequency_table + pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; + +static unsigned int pxa255_turbo_table; +module_param(pxa255_turbo_table, uint, 0); +MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)"); + +static struct pxa_freqs pxa27x_freqs[] = { + {104000, 900000, 1705000 }, + {156000, 1000000, 1705000 }, + {208000, 1180000, 1705000 }, + {312000, 1250000, 1705000 }, + {416000, 1350000, 1705000 }, + {520000, 1450000, 1705000 }, + {624000, 1550000, 1705000 } +}; + +#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) +static struct cpufreq_frequency_table + pxa27x_freq_table[NUM_PXA27x_FREQS+1]; + +#ifdef CONFIG_REGULATOR + +static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq) +{ + int ret = 0; + int vmin, vmax; + + if (!cpu_is_pxa27x()) + return 0; + + vmin = pxa_freq->vmin; + vmax = pxa_freq->vmax; + if ((vmin == -1) || (vmax == -1)) + return 0; + + ret = regulator_set_voltage(vcc_core, vmin, vmax); + if (ret) + pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax); + return ret; +} + +static void pxa_cpufreq_init_voltages(void) +{ + vcc_core = regulator_get(NULL, "vcc_core"); + if (IS_ERR(vcc_core)) { + pr_info("Didn't find vcc_core regulator\n"); + vcc_core = NULL; + } else { + pr_info("Found vcc_core regulator\n"); + } +} +#else +static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq) +{ + return 0; +} + +static void pxa_cpufreq_init_voltages(void) { } +#endif + +static void find_freq_tables(struct cpufreq_frequency_table **freq_table, + const struct pxa_freqs **pxa_freqs) +{ + if (cpu_is_pxa25x()) { + if (!pxa255_turbo_table) { + *pxa_freqs = pxa255_run_freqs; + *freq_table = pxa255_run_freq_table; + } else { + *pxa_freqs = pxa255_turbo_freqs; + *freq_table = pxa255_turbo_freq_table; + } + } else if (cpu_is_pxa27x()) { + *pxa_freqs = pxa27x_freqs; + *freq_table = pxa27x_freq_table; + } else { + BUG(); + } +} + +static void pxa27x_guess_max_freq(void) +{ + if (!pxa27x_maxfreq) { + pxa27x_maxfreq = 416000; + pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", + pxa27x_maxfreq); + } else { + pxa27x_maxfreq *= 1000; + } +} + +static unsigned int pxa_cpufreq_get(unsigned int cpu) +{ + struct pxa_cpufreq_data *data = cpufreq_get_driver_data(); + + return (unsigned int) clk_get_rate(data->clk_core) / 1000; +} + +static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx) +{ + struct cpufreq_frequency_table *pxa_freqs_table; + const struct pxa_freqs *pxa_freq_settings; + struct pxa_cpufreq_data *data = cpufreq_get_driver_data(); + unsigned int new_freq_cpu; + int ret = 0; + + /* Get the current policy */ + find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); + + new_freq_cpu = pxa_freq_settings[idx].khz; + + if (freq_debug) + pr_debug("Changing CPU frequency from %d Mhz to %d Mhz\n", + policy->cur / 1000, new_freq_cpu / 1000); + + if (vcc_core && new_freq_cpu > policy->cur) { + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + if (ret) + return ret; + } + + clk_set_rate(data->clk_core, new_freq_cpu * 1000); + + /* + * Even if voltage setting fails, we don't report it, as the frequency + * change succeeded. The voltage reduction is not a critical failure, + * only power savings will suffer from this. + * + * Note: if the voltage change fails, and a return value is returned, a + * bug is triggered (seems a deadlock). Should anybody find out where, + * the "return 0" should become a "return ret". + */ + if (vcc_core && new_freq_cpu < policy->cur) + ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); + + return 0; +} + +static int pxa_cpufreq_init(struct cpufreq_policy *policy) +{ + int i; + unsigned int freq; + struct cpufreq_frequency_table *pxa255_freq_table; + const struct pxa_freqs *pxa255_freqs; + + /* try to guess pxa27x cpu */ + if (cpu_is_pxa27x()) + pxa27x_guess_max_freq(); + + pxa_cpufreq_init_voltages(); + + /* set default policy and cpuinfo */ + policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ + + /* Generate pxa25x the run cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { + pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; + pxa255_run_freq_table[i].driver_data = i; + } + pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; + + /* Generate pxa25x the turbo cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { + pxa255_turbo_freq_table[i].frequency = + pxa255_turbo_freqs[i].khz; + pxa255_turbo_freq_table[i].driver_data = i; + } + pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; + + pxa255_turbo_table = !!pxa255_turbo_table; + + /* Generate the pxa27x cpufreq_frequency_table struct */ + for (i = 0; i < NUM_PXA27x_FREQS; i++) { + freq = pxa27x_freqs[i].khz; + if (freq > pxa27x_maxfreq) + break; + pxa27x_freq_table[i].frequency = freq; + pxa27x_freq_table[i].driver_data = i; + } + pxa27x_freq_table[i].driver_data = i; + pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; + + /* + * Set the policy's minimum and maximum frequencies from the tables + * just constructed. This sets cpuinfo.mxx_freq, min and max. + */ + if (cpu_is_pxa25x()) { + find_freq_tables(&pxa255_freq_table, &pxa255_freqs); + pr_info("using %s frequency table\n", + pxa255_turbo_table ? "turbo" : "run"); + + policy->freq_table = pxa255_freq_table; + } + else if (cpu_is_pxa27x()) { + policy->freq_table = pxa27x_freq_table; + } + + pr_info("frequency change support initialized\n"); + + return 0; +} + +static struct cpufreq_driver pxa_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pxa_set_target, + .init = pxa_cpufreq_init, + .get = pxa_cpufreq_get, + .name = "PXA2xx", + .driver_data = &pxa_cpufreq_data, +}; + +static int __init pxa_cpu_init(void) +{ + int ret = -ENODEV; + + pxa_cpufreq_data.clk_core = clk_get_sys(NULL, "core"); + if (IS_ERR(pxa_cpufreq_data.clk_core)) + return PTR_ERR(pxa_cpufreq_data.clk_core); + + if (cpu_is_pxa25x() || cpu_is_pxa27x()) + ret = cpufreq_register_driver(&pxa_cpufreq_driver); + return ret; +} + +static void __exit pxa_cpu_exit(void) +{ + cpufreq_unregister_driver(&pxa_cpufreq_driver); +} + + +MODULE_AUTHOR("Intrinsyc Software Inc."); +MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture"); +MODULE_LICENSE("GPL"); +module_init(pxa_cpu_init); +module_exit(pxa_cpu_exit); diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c new file mode 100644 index 000000000..4afa48d17 --- /dev/null +++ b/drivers/cpufreq/pxa3xx-cpufreq.c @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2008 Marvell International Ltd. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/clk/pxa.h> +#include <linux/slab.h> +#include <linux/io.h> + +#define HSS_104M (0) +#define HSS_156M (1) +#define HSS_208M (2) +#define HSS_312M (3) + +#define SMCFS_78M (0) +#define SMCFS_104M (2) +#define SMCFS_208M (5) + +#define SFLFS_104M (0) +#define SFLFS_156M (1) +#define SFLFS_208M (2) +#define SFLFS_312M (3) + +#define XSPCLK_156M (0) +#define XSPCLK_NONE (3) + +#define DMCFS_26M (0) +#define DMCFS_260M (3) + +#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */ +#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */ +#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */ +#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */ +#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */ + +#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */ +#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */ +#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */ +#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */ +#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */ +#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */ +#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */ + +#define ACCR_SMCFS(x) (((x) & 0x7) << 23) +#define ACCR_SFLFS(x) (((x) & 0x3) << 18) +#define ACCR_XSPCLK(x) (((x) & 0x3) << 16) +#define ACCR_HSS(x) (((x) & 0x3) << 14) +#define ACCR_DMCFS(x) (((x) & 0x3) << 12) +#define ACCR_XN(x) (((x) & 0x7) << 8) +#define ACCR_XL(x) ((x) & 0x1f) + +struct pxa3xx_freq_info { + unsigned int cpufreq_mhz; + unsigned int core_xl : 5; + unsigned int core_xn : 3; + unsigned int hss : 2; + unsigned int dmcfs : 2; + unsigned int smcfs : 3; + unsigned int sflfs : 2; + unsigned int df_clkdiv : 3; + + int vcc_core; /* in mV */ + int vcc_sram; /* in mV */ +}; + +#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \ +{ \ + .cpufreq_mhz = cpufreq, \ + .core_xl = _xl, \ + .core_xn = _xn, \ + .hss = HSS_##_hss##M, \ + .dmcfs = DMCFS_##_dmc##M, \ + .smcfs = SMCFS_##_smc##M, \ + .sflfs = SFLFS_##_sfl##M, \ + .df_clkdiv = _dfi, \ + .vcc_core = vcore, \ + .vcc_sram = vsram, \ +} + +static struct pxa3xx_freq_info pxa300_freqs[] = { + /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ + OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ + OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ + OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ + OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ +}; + +static struct pxa3xx_freq_info pxa320_freqs[] = { + /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ + OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ + OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ + OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ + OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ + OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */ +}; + +static unsigned int pxa3xx_freqs_num; +static struct pxa3xx_freq_info *pxa3xx_freqs; +static struct cpufreq_frequency_table *pxa3xx_freqs_table; + +static int setup_freqs_table(struct cpufreq_policy *policy, + struct pxa3xx_freq_info *freqs, int num) +{ + struct cpufreq_frequency_table *table; + int i; + + table = kcalloc(num + 1, sizeof(*table), GFP_KERNEL); + if (table == NULL) + return -ENOMEM; + + for (i = 0; i < num; i++) { + table[i].driver_data = i; + table[i].frequency = freqs[i].cpufreq_mhz * 1000; + } + table[num].driver_data = i; + table[num].frequency = CPUFREQ_TABLE_END; + + pxa3xx_freqs = freqs; + pxa3xx_freqs_num = num; + pxa3xx_freqs_table = table; + + policy->freq_table = table; + + return 0; +} + +static void __update_core_freq(struct pxa3xx_freq_info *info) +{ + u32 mask, disable, enable, xclkcfg; + + mask = ACCR_XN_MASK | ACCR_XL_MASK; + disable = mask | ACCR_XSPCLK_MASK; + enable = ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl); + /* No clock until core PLL is re-locked */ + enable |= ACCR_XSPCLK(XSPCLK_NONE); + xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */ + + pxa3xx_clk_update_accr(disable, enable, xclkcfg, mask); +} + +static void __update_bus_freq(struct pxa3xx_freq_info *info) +{ + u32 mask, disable, enable; + + mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK | + ACCR_DMCFS_MASK; + disable = mask; + enable = ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) | + ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs); + + pxa3xx_clk_update_accr(disable, enable, 0, mask); +} + +static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) +{ + return pxa3xx_get_clk_frequency_khz(0); +} + +static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, unsigned int index) +{ + struct pxa3xx_freq_info *next; + unsigned long flags; + + if (policy->cpu != 0) + return -EINVAL; + + next = &pxa3xx_freqs[index]; + + local_irq_save(flags); + __update_core_freq(next); + __update_bus_freq(next); + local_irq_restore(flags); + + return 0; +} + +static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret = -EINVAL; + + /* set default policy and cpuinfo */ + policy->min = policy->cpuinfo.min_freq = 104000; + policy->max = policy->cpuinfo.max_freq = + (cpu_is_pxa320()) ? 806000 : 624000; + policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ + + if (cpu_is_pxa300() || cpu_is_pxa310()) + ret = setup_freqs_table(policy, pxa300_freqs, + ARRAY_SIZE(pxa300_freqs)); + + if (cpu_is_pxa320()) + ret = setup_freqs_table(policy, pxa320_freqs, + ARRAY_SIZE(pxa320_freqs)); + + if (ret) { + pr_err("failed to setup frequency table\n"); + return ret; + } + + pr_info("CPUFREQ support for PXA3xx initialized\n"); + return 0; +} + +static struct cpufreq_driver pxa3xx_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pxa3xx_cpufreq_set, + .init = pxa3xx_cpufreq_init, + .get = pxa3xx_cpufreq_get, + .name = "pxa3xx-cpufreq", +}; + +static int __init cpufreq_init(void) +{ + if (cpu_is_pxa3xx()) + return cpufreq_register_driver(&pxa3xx_cpufreq_driver); + + return 0; +} +module_init(cpufreq_init); + +static void __exit cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pxa3xx_cpufreq_driver); +} +module_exit(cpufreq_exit); + +MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c new file mode 100644 index 000000000..749b60c78 --- /dev/null +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/bitfield.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/interconnect.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/units.h> + +#define LUT_MAX_ENTRIES 40U +#define LUT_SRC GENMASK(31, 30) +#define LUT_L_VAL GENMASK(7, 0) +#define LUT_CORE_COUNT GENMASK(18, 16) +#define LUT_VOLT GENMASK(11, 0) +#define CLK_HW_DIV 2 +#define LUT_TURBO_IND 1 + +#define GT_IRQ_STATUS BIT(2) + +struct qcom_cpufreq_soc_data { + u32 reg_enable; + u32 reg_domain_state; + u32 reg_dcvs_ctrl; + u32 reg_freq_lut; + u32 reg_volt_lut; + u32 reg_intr_clr; + u32 reg_current_vote; + u32 reg_perf_state; + u8 lut_row_size; +}; + +struct qcom_cpufreq_data { + void __iomem *base; + struct resource *res; + const struct qcom_cpufreq_soc_data *soc_data; + + /* + * Mutex to synchronize between de-init sequence and re-starting LMh + * polling/interrupts + */ + struct mutex throttle_lock; + int throttle_irq; + char irq_name[15]; + bool cancel_throttle; + struct delayed_work throttle_work; + struct cpufreq_policy *policy; + + bool per_core_dcvs; +}; + +static unsigned long cpu_hw_rate, xo_rate; +static bool icc_scaling_enabled; + +static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy, + unsigned long freq_khz) +{ + unsigned long freq_hz = freq_khz * 1000; + struct dev_pm_opp *opp; + struct device *dev; + int ret; + + dev = get_cpu_device(policy->cpu); + if (!dev) + return -ENODEV; + + opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); + if (IS_ERR(opp)) + return PTR_ERR(opp); + + ret = dev_pm_opp_set_opp(dev, opp); + dev_pm_opp_put(opp); + return ret; +} + +static int qcom_cpufreq_update_opp(struct device *cpu_dev, + unsigned long freq_khz, + unsigned long volt) +{ + unsigned long freq_hz = freq_khz * 1000; + int ret; + + /* Skip voltage update if the opp table is not available */ + if (!icc_scaling_enabled) + return dev_pm_opp_add(cpu_dev, freq_hz, volt); + + ret = dev_pm_opp_adjust_voltage(cpu_dev, freq_hz, volt, volt, volt); + if (ret) { + dev_err(cpu_dev, "Voltage update failed freq=%ld\n", freq_khz); + return ret; + } + + return dev_pm_opp_enable(cpu_dev, freq_hz); +} + +static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; + unsigned long freq = policy->freq_table[index].frequency; + unsigned int i; + + writel_relaxed(index, data->base + soc_data->reg_perf_state); + + if (data->per_core_dcvs) + for (i = 1; i < cpumask_weight(policy->related_cpus); i++) + writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); + + if (icc_scaling_enabled) + qcom_cpufreq_set_bw(policy, freq); + + return 0; +} + +static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data) +{ + unsigned int lval; + + if (data->soc_data->reg_current_vote) + lval = readl_relaxed(data->base + data->soc_data->reg_current_vote) & 0x3ff; + else + lval = readl_relaxed(data->base + data->soc_data->reg_domain_state) & 0xff; + + return lval * xo_rate; +} + +/* Get the frequency requested by the cpufreq core for the CPU */ +static unsigned int qcom_cpufreq_get_freq(unsigned int cpu) +{ + struct qcom_cpufreq_data *data; + const struct qcom_cpufreq_soc_data *soc_data; + struct cpufreq_policy *policy; + unsigned int index; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy) + return 0; + + data = policy->driver_data; + soc_data = data->soc_data; + + index = readl_relaxed(data->base + soc_data->reg_perf_state); + index = min(index, LUT_MAX_ENTRIES - 1); + + return policy->freq_table[index].frequency; +} + +static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) +{ + struct qcom_cpufreq_data *data; + struct cpufreq_policy *policy; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy) + return 0; + + data = policy->driver_data; + + if (data->throttle_irq >= 0) + return qcom_lmh_get_throttle_freq(data) / HZ_PER_KHZ; + + return qcom_cpufreq_get_freq(cpu); +} + +static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; + unsigned int index; + unsigned int i; + + index = policy->cached_resolved_idx; + writel_relaxed(index, data->base + soc_data->reg_perf_state); + + if (data->per_core_dcvs) + for (i = 1; i < cpumask_weight(policy->related_cpus); i++) + writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4); + + return policy->freq_table[index].frequency; +} + +static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, + struct cpufreq_policy *policy) +{ + u32 data, src, lval, i, core_count, prev_freq = 0, freq; + u32 volt; + struct cpufreq_frequency_table *table; + struct dev_pm_opp *opp; + unsigned long rate; + int ret; + struct qcom_cpufreq_data *drv_data = policy->driver_data; + const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data; + + table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); + if (!table) + return -ENOMEM; + + ret = dev_pm_opp_of_add_table(cpu_dev); + if (!ret) { + /* Disable all opps and cross-validate against LUT later */ + icc_scaling_enabled = true; + for (rate = 0; ; rate++) { + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); + if (IS_ERR(opp)) + break; + + dev_pm_opp_put(opp); + dev_pm_opp_disable(cpu_dev, rate); + } + } else if (ret != -ENODEV) { + dev_err(cpu_dev, "Invalid opp table in device tree\n"); + kfree(table); + return ret; + } else { + policy->fast_switch_possible = true; + icc_scaling_enabled = false; + } + + for (i = 0; i < LUT_MAX_ENTRIES; i++) { + data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut + + i * soc_data->lut_row_size); + src = FIELD_GET(LUT_SRC, data); + lval = FIELD_GET(LUT_L_VAL, data); + core_count = FIELD_GET(LUT_CORE_COUNT, data); + + data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut + + i * soc_data->lut_row_size); + volt = FIELD_GET(LUT_VOLT, data) * 1000; + + if (src) + freq = xo_rate * lval / 1000; + else + freq = cpu_hw_rate / 1000; + + if (freq != prev_freq && core_count != LUT_TURBO_IND) { + if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) { + table[i].frequency = freq; + dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, + freq, core_count); + } else { + dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq); + table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + } else if (core_count == LUT_TURBO_IND) { + table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + /* + * Two of the same frequencies with the same core counts means + * end of table + */ + if (i > 0 && prev_freq == freq) { + struct cpufreq_frequency_table *prev = &table[i - 1]; + + /* + * Only treat the last frequency that might be a boost + * as the boost frequency + */ + if (prev->frequency == CPUFREQ_ENTRY_INVALID) { + if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) { + prev->frequency = prev_freq; + prev->flags = CPUFREQ_BOOST_FREQ; + } else { + dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", + freq); + } + } + + break; + } + + prev_freq = freq; + } + + table[i].frequency = CPUFREQ_TABLE_END; + policy->freq_table = table; + dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); + + return 0; +} + +static void qcom_get_related_cpus(int index, struct cpumask *m) +{ + struct device_node *cpu_np; + struct of_phandle_args args; + int cpu, ret; + + for_each_possible_cpu(cpu) { + cpu_np = of_cpu_device_node_get(cpu); + if (!cpu_np) + continue; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, + &args); + of_node_put(cpu_np); + if (ret < 0) + continue; + + if (index == args.args[0]) + cpumask_set_cpu(cpu, m); + } +} + +static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) +{ + struct cpufreq_policy *policy = data->policy; + int cpu = cpumask_first(policy->related_cpus); + struct device *dev = get_cpu_device(cpu); + unsigned long freq_hz, throttled_freq; + struct dev_pm_opp *opp; + + /* + * Get the h/w throttled frequency, normalize it using the + * registered opp table and use it to calculate thermal pressure. + */ + freq_hz = qcom_lmh_get_throttle_freq(data); + + opp = dev_pm_opp_find_freq_floor(dev, &freq_hz); + if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE) + opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz); + + if (IS_ERR(opp)) { + dev_warn(dev, "Can't find the OPP for throttling: %pe!\n", opp); + } else { + dev_pm_opp_put(opp); + } + + throttled_freq = freq_hz / HZ_PER_KHZ; + + /* Update thermal pressure (the boost frequencies are accepted) */ + arch_update_thermal_pressure(policy->related_cpus, throttled_freq); + + /* + * In the unlikely case policy is unregistered do not enable + * polling or h/w interrupt + */ + mutex_lock(&data->throttle_lock); + if (data->cancel_throttle) + goto out; + + /* + * If h/w throttled frequency is higher than what cpufreq has requested + * for, then stop polling and switch back to interrupt mechanism. + */ + if (throttled_freq >= qcom_cpufreq_get_freq(cpu)) + enable_irq(data->throttle_irq); + else + mod_delayed_work(system_highpri_wq, &data->throttle_work, + msecs_to_jiffies(10)); + +out: + mutex_unlock(&data->throttle_lock); +} + +static void qcom_lmh_dcvs_poll(struct work_struct *work) +{ + struct qcom_cpufreq_data *data; + + data = container_of(work, struct qcom_cpufreq_data, throttle_work.work); + qcom_lmh_dcvs_notify(data); +} + +static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data) +{ + struct qcom_cpufreq_data *c_data = data; + + /* Disable interrupt and enable polling */ + disable_irq_nosync(c_data->throttle_irq); + schedule_delayed_work(&c_data->throttle_work, 0); + + if (c_data->soc_data->reg_intr_clr) + writel_relaxed(GT_IRQ_STATUS, + c_data->base + c_data->soc_data->reg_intr_clr); + + return IRQ_HANDLED; +} + +static const struct qcom_cpufreq_soc_data qcom_soc_data = { + .reg_enable = 0x0, + .reg_dcvs_ctrl = 0xbc, + .reg_freq_lut = 0x110, + .reg_volt_lut = 0x114, + .reg_current_vote = 0x704, + .reg_perf_state = 0x920, + .lut_row_size = 32, +}; + +static const struct qcom_cpufreq_soc_data epss_soc_data = { + .reg_enable = 0x0, + .reg_domain_state = 0x20, + .reg_dcvs_ctrl = 0xb0, + .reg_freq_lut = 0x100, + .reg_volt_lut = 0x200, + .reg_intr_clr = 0x308, + .reg_perf_state = 0x320, + .lut_row_size = 4, +}; + +static const struct of_device_id qcom_cpufreq_hw_match[] = { + { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data }, + { .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match); + +static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + struct platform_device *pdev = cpufreq_get_driver_data(); + int ret; + + /* + * Look for LMh interrupt. If no interrupt line is specified / + * if there is an error, allow cpufreq to be enabled as usual. + */ + data->throttle_irq = platform_get_irq_optional(pdev, index); + if (data->throttle_irq == -ENXIO) + return 0; + if (data->throttle_irq < 0) + return data->throttle_irq; + + data->cancel_throttle = false; + data->policy = policy; + + mutex_init(&data->throttle_lock); + INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll); + + snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu); + ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq, + IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data); + if (ret) { + dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret); + return 0; + } + + ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus); + if (ret) + dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n", + data->irq_name, data->throttle_irq); + + return 0; +} + +static int qcom_cpufreq_hw_cpu_online(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + struct platform_device *pdev = cpufreq_get_driver_data(); + int ret; + + if (data->throttle_irq <= 0) + return 0; + + mutex_lock(&data->throttle_lock); + data->cancel_throttle = false; + mutex_unlock(&data->throttle_lock); + + ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus); + if (ret) + dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n", + data->irq_name, data->throttle_irq); + + return ret; +} + +static int qcom_cpufreq_hw_cpu_offline(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + + if (data->throttle_irq <= 0) + return 0; + + mutex_lock(&data->throttle_lock); + data->cancel_throttle = true; + mutex_unlock(&data->throttle_lock); + + cancel_delayed_work_sync(&data->throttle_work); + irq_set_affinity_and_hint(data->throttle_irq, NULL); + disable_irq_nosync(data->throttle_irq); + + return 0; +} + +static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data) +{ + if (data->throttle_irq <= 0) + return; + + free_irq(data->throttle_irq, data); +} + +static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) +{ + struct platform_device *pdev = cpufreq_get_driver_data(); + struct device *dev = &pdev->dev; + struct of_phandle_args args; + struct device_node *cpu_np; + struct device *cpu_dev; + struct resource *res; + void __iomem *base; + struct qcom_cpufreq_data *data; + int ret, index; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + + cpu_np = of_cpu_device_node_get(policy->cpu); + if (!cpu_np) + return -EINVAL; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, &args); + of_node_put(cpu_np); + if (ret) + return ret; + + index = args.args[0]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, index); + if (!res) { + dev_err(dev, "failed to get mem resource %d\n", index); + return -ENODEV; + } + + if (!request_mem_region(res->start, resource_size(res), res->name)) { + dev_err(dev, "failed to request resource %pR\n", res); + return -EBUSY; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(dev, "failed to map resource %pR\n", res); + ret = -ENOMEM; + goto release_region; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto unmap_base; + } + + data->soc_data = of_device_get_match_data(&pdev->dev); + data->base = base; + data->res = res; + + /* HW should be in enabled state to proceed */ + if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) { + dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); + ret = -ENODEV; + goto error; + } + + if (readl_relaxed(base + data->soc_data->reg_dcvs_ctrl) & 0x1) + data->per_core_dcvs = true; + + qcom_get_related_cpus(index, policy->cpus); + if (cpumask_empty(policy->cpus)) { + dev_err(dev, "Domain-%d failed to get related CPUs\n", index); + ret = -ENOENT; + goto error; + } + + policy->driver_data = data; + policy->dvfs_possible_from_any_cpu = true; + + ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy); + if (ret) { + dev_err(dev, "Domain-%d failed to read LUT\n", index); + goto error; + } + + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_err(cpu_dev, "Failed to add OPPs\n"); + ret = -ENODEV; + goto error; + } + + if (policy_has_boost_freq(policy)) { + ret = cpufreq_enable_boost_support(); + if (ret) + dev_warn(cpu_dev, "failed to enable boost: %d\n", ret); + } + + ret = qcom_cpufreq_hw_lmh_init(policy, index); + if (ret) + goto error; + + return 0; +error: + kfree(data); +unmap_base: + iounmap(base); +release_region: + release_mem_region(res->start, resource_size(res)); + return ret; +} + +static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) +{ + struct device *cpu_dev = get_cpu_device(policy->cpu); + struct qcom_cpufreq_data *data = policy->driver_data; + struct resource *res = data->res; + void __iomem *base = data->base; + + dev_pm_opp_remove_all_dynamic(cpu_dev); + dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); + qcom_cpufreq_hw_lmh_exit(data); + kfree(policy->freq_table); + kfree(data); + iounmap(base); + release_mem_region(res->start, resource_size(res)); + + return 0; +} + +static void qcom_cpufreq_ready(struct cpufreq_policy *policy) +{ + struct qcom_cpufreq_data *data = policy->driver_data; + + if (data->throttle_irq >= 0) + enable_irq(data->throttle_irq); +} + +static struct freq_attr *qcom_cpufreq_hw_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &cpufreq_freq_attr_scaling_boost_freqs, + NULL +}; + +static struct cpufreq_driver cpufreq_qcom_hw_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = qcom_cpufreq_hw_target_index, + .get = qcom_cpufreq_hw_get, + .init = qcom_cpufreq_hw_cpu_init, + .exit = qcom_cpufreq_hw_cpu_exit, + .online = qcom_cpufreq_hw_cpu_online, + .offline = qcom_cpufreq_hw_cpu_offline, + .register_em = cpufreq_register_em_with_opp, + .fast_switch = qcom_cpufreq_hw_fast_switch, + .name = "qcom-cpufreq-hw", + .attr = qcom_cpufreq_hw_attr, + .ready = qcom_cpufreq_ready, +}; + +static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + struct clk *clk; + int ret; + + clk = clk_get(&pdev->dev, "xo"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + xo_rate = clk_get_rate(clk); + clk_put(clk); + + clk = clk_get(&pdev->dev, "alternate"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV; + clk_put(clk); + + cpufreq_qcom_hw_driver.driver_data = pdev; + + /* Check for optional interconnect paths on CPU0 */ + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -EPROBE_DEFER; + + ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL); + if (ret) + return ret; + + ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver); + if (ret) + dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n"); + else + dev_dbg(&pdev->dev, "QCOM CPUFreq HW driver initialized\n"); + + return ret; +} + +static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver); +} + +static struct platform_driver qcom_cpufreq_hw_driver = { + .probe = qcom_cpufreq_hw_driver_probe, + .remove = qcom_cpufreq_hw_driver_remove, + .driver = { + .name = "qcom-cpufreq-hw", + .of_match_table = qcom_cpufreq_hw_match, + }, +}; + +static int __init qcom_cpufreq_hw_init(void) +{ + return platform_driver_register(&qcom_cpufreq_hw_driver); +} +postcore_initcall(qcom_cpufreq_hw_init); + +static void __exit qcom_cpufreq_hw_exit(void) +{ + platform_driver_unregister(&qcom_cpufreq_hw_driver); +} +module_exit(qcom_cpufreq_hw_exit); + +MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c new file mode 100644 index 000000000..a577586b2 --- /dev/null +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +/* + * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, + * the CPU frequency subset and voltage value of each OPP varies + * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables + * defines the voltage and frequency value based on the msm-id in SMEM + * and speedbin blown in the efuse combination. + * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC + * to provide the OPP framework with required information. + * This is used to determine the voltage and frequency value for each OPP of + * operating-points-v2 table when it is parsed by the OPP framework. + */ + +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/soc/qcom/smem.h> + +#define MSM_ID_SMEM 137 + +enum _msm_id { + MSM8996V3 = 0xF6ul, + APQ8096V3 = 0x123ul, + MSM8996SG = 0x131ul, + APQ8096SG = 0x138ul, +}; + +enum _msm8996_version { + MSM8996_V3, + MSM8996_SG, + NUM_OF_MSM8996_VERSIONS, +}; + +struct qcom_cpufreq_drv; + +struct qcom_cpufreq_match_data { + int (*get_version)(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, + char **pvs_name, + struct qcom_cpufreq_drv *drv); + const char **genpd_names; +}; + +struct qcom_cpufreq_drv { + int *opp_tokens; + u32 versions; + const struct qcom_cpufreq_match_data *data; +}; + +static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; + +static void get_krait_bin_format_a(struct device *cpu_dev, + int *speed, int *pvs, int *pvs_ver, + u8 *buf) +{ + u32 pte_efuse; + + pte_efuse = *((u32 *)buf); + + *speed = pte_efuse & 0xf; + if (*speed == 0xf) + *speed = (pte_efuse >> 4) & 0xf; + + if (*speed == 0xf) { + *speed = 0; + dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed); + } else { + dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); + } + + *pvs = (pte_efuse >> 10) & 0x7; + if (*pvs == 0x7) + *pvs = (pte_efuse >> 13) & 0x7; + + if (*pvs == 0x7) { + *pvs = 0; + dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs); + } else { + dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); + } +} + +static void get_krait_bin_format_b(struct device *cpu_dev, + int *speed, int *pvs, int *pvs_ver, + u8 *buf) +{ + u32 pte_efuse, redundant_sel; + + pte_efuse = *((u32 *)buf); + redundant_sel = (pte_efuse >> 24) & 0x7; + + *pvs_ver = (pte_efuse >> 4) & 0x3; + + switch (redundant_sel) { + case 1: + *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); + *speed = (pte_efuse >> 27) & 0xf; + break; + case 2: + *pvs = (pte_efuse >> 27) & 0xf; + *speed = pte_efuse & 0x7; + break; + default: + /* 4 bits of PVS are in efuse register bits 31, 8-6. */ + *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); + *speed = pte_efuse & 0x7; + } + + /* Check SPEED_BIN_BLOW_STATUS */ + if (pte_efuse & BIT(3)) { + dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); + } else { + dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n"); + *speed = 0; + } + + /* Check PVS_BLOW_STATUS */ + pte_efuse = *(((u32 *)buf) + 1); + pte_efuse &= BIT(21); + if (pte_efuse) { + dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); + } else { + dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n"); + *pvs = 0; + } + + dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver); +} + +static enum _msm8996_version qcom_cpufreq_get_msm_id(void) +{ + size_t len; + u32 *msm_id; + enum _msm8996_version version; + + msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); + if (IS_ERR(msm_id)) + return NUM_OF_MSM8996_VERSIONS; + + /* The first 4 bytes are format, next to them is the actual msm-id */ + msm_id++; + + switch ((enum _msm_id)*msm_id) { + case MSM8996V3: + case APQ8096V3: + version = MSM8996_V3; + break; + case MSM8996SG: + case APQ8096SG: + version = MSM8996_SG; + break; + default: + version = NUM_OF_MSM8996_VERSIONS; + } + + return version; +} + +static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, + char **pvs_name, + struct qcom_cpufreq_drv *drv) +{ + size_t len; + u8 *speedbin; + enum _msm8996_version msm8996_version; + *pvs_name = NULL; + + msm8996_version = qcom_cpufreq_get_msm_id(); + if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { + dev_err(cpu_dev, "Not Snapdragon 820/821!"); + return -ENODEV; + } + + speedbin = nvmem_cell_read(speedbin_nvmem, &len); + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); + + switch (msm8996_version) { + case MSM8996_V3: + drv->versions = 1 << (unsigned int)(*speedbin); + break; + case MSM8996_SG: + drv->versions = 1 << ((unsigned int)(*speedbin) + 4); + break; + default: + BUG(); + break; + } + + kfree(speedbin); + return 0; +} + +static int qcom_cpufreq_krait_name_version(struct device *cpu_dev, + struct nvmem_cell *speedbin_nvmem, + char **pvs_name, + struct qcom_cpufreq_drv *drv) +{ + int speed = 0, pvs = 0, pvs_ver = 0; + u8 *speedbin; + size_t len; + int ret = 0; + + speedbin = nvmem_cell_read(speedbin_nvmem, &len); + + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); + + switch (len) { + case 4: + get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver, + speedbin); + break; + case 8: + get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver, + speedbin); + break; + default: + dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n"); + ret = -ENODEV; + goto len_error; + } + + snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", + speed, pvs, pvs_ver); + + drv->versions = (1 << speed); + +len_error: + kfree(speedbin); + return ret; +} + +static const struct qcom_cpufreq_match_data match_data_kryo = { + .get_version = qcom_cpufreq_kryo_name_version, +}; + +static const struct qcom_cpufreq_match_data match_data_krait = { + .get_version = qcom_cpufreq_krait_name_version, +}; + +static const char *qcs404_genpd_names[] = { "cpr", NULL }; + +static const struct qcom_cpufreq_match_data match_data_qcs404 = { + .genpd_names = qcs404_genpd_names, +}; + +static int qcom_cpufreq_probe(struct platform_device *pdev) +{ + struct qcom_cpufreq_drv *drv; + struct nvmem_cell *speedbin_nvmem; + struct device_node *np; + struct device *cpu_dev; + char pvs_name_buffer[] = "speedXX-pvsXX-vXX"; + char *pvs_name = pvs_name_buffer; + unsigned cpu; + const struct of_device_id *match; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!np) + return -ENOENT; + + ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu"); + if (!ret) { + of_node_put(np); + return -ENOENT; + } + + drv = kzalloc(sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + match = pdev->dev.platform_data; + drv->data = match->data; + if (!drv->data) { + ret = -ENODEV; + goto free_drv; + } + + if (drv->data->get_version) { + speedbin_nvmem = of_nvmem_cell_get(np, NULL); + if (IS_ERR(speedbin_nvmem)) { + ret = dev_err_probe(cpu_dev, PTR_ERR(speedbin_nvmem), + "Could not get nvmem cell\n"); + goto free_drv; + } + + ret = drv->data->get_version(cpu_dev, + speedbin_nvmem, &pvs_name, drv); + if (ret) { + nvmem_cell_put(speedbin_nvmem); + goto free_drv; + } + nvmem_cell_put(speedbin_nvmem); + } + of_node_put(np); + + drv->opp_tokens = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tokens), + GFP_KERNEL); + if (!drv->opp_tokens) { + ret = -ENOMEM; + goto free_drv; + } + + for_each_possible_cpu(cpu) { + struct dev_pm_opp_config config = { + .supported_hw = NULL, + }; + + cpu_dev = get_cpu_device(cpu); + if (NULL == cpu_dev) { + ret = -ENODEV; + goto free_opp; + } + + if (drv->data->get_version) { + config.supported_hw = &drv->versions; + config.supported_hw_count = 1; + + if (pvs_name) + config.prop_name = pvs_name; + } + + if (drv->data->genpd_names) { + config.genpd_names = drv->data->genpd_names; + config.virt_devs = NULL; + } + + if (config.supported_hw || config.genpd_names) { + drv->opp_tokens[cpu] = dev_pm_opp_set_config(cpu_dev, &config); + if (drv->opp_tokens[cpu] < 0) { + ret = drv->opp_tokens[cpu]; + dev_err(cpu_dev, "Failed to set OPP config\n"); + goto free_opp; + } + } + } + + cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, + NULL, 0); + if (!IS_ERR(cpufreq_dt_pdev)) { + platform_set_drvdata(pdev, drv); + return 0; + } + + ret = PTR_ERR(cpufreq_dt_pdev); + dev_err(cpu_dev, "Failed to register platform device\n"); + +free_opp: + for_each_possible_cpu(cpu) + dev_pm_opp_clear_config(drv->opp_tokens[cpu]); + kfree(drv->opp_tokens); +free_drv: + kfree(drv); + + return ret; +} + +static int qcom_cpufreq_remove(struct platform_device *pdev) +{ + struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev); + unsigned int cpu; + + platform_device_unregister(cpufreq_dt_pdev); + + for_each_possible_cpu(cpu) + dev_pm_opp_clear_config(drv->opp_tokens[cpu]); + + kfree(drv->opp_tokens); + kfree(drv); + + return 0; +} + +static struct platform_driver qcom_cpufreq_driver = { + .probe = qcom_cpufreq_probe, + .remove = qcom_cpufreq_remove, + .driver = { + .name = "qcom-cpufreq-nvmem", + }, +}; + +static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { + { .compatible = "qcom,apq8096", .data = &match_data_kryo }, + { .compatible = "qcom,msm8996", .data = &match_data_kryo }, + { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, + { .compatible = "qcom,ipq8064", .data = &match_data_krait }, + { .compatible = "qcom,apq8064", .data = &match_data_krait }, + { .compatible = "qcom,msm8974", .data = &match_data_krait }, + { .compatible = "qcom,msm8960", .data = &match_data_krait }, + {}, +}; +MODULE_DEVICE_TABLE(of, qcom_cpufreq_match_list); + +/* + * Since the driver depends on smem and nvmem drivers, which may + * return EPROBE_DEFER, all the real activity is done in the probe, + * which may be defered as well. The init here is only registering + * the driver and the platform device. + */ +static int __init qcom_cpufreq_init(void) +{ + struct device_node *np = of_find_node_by_path("/"); + const struct of_device_id *match; + int ret; + + if (!np) + return -ENODEV; + + match = of_match_node(qcom_cpufreq_match_list, np); + of_node_put(np); + if (!match) + return -ENODEV; + + ret = platform_driver_register(&qcom_cpufreq_driver); + if (unlikely(ret < 0)) + return ret; + + cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem", + -1, match, sizeof(*match)); + ret = PTR_ERR_OR_ZERO(cpufreq_pdev); + if (0 == ret) + return 0; + + platform_driver_unregister(&qcom_cpufreq_driver); + return ret; +} +module_init(qcom_cpufreq_init); + +static void __exit qcom_cpufreq_exit(void) +{ + platform_device_unregister(cpufreq_pdev); + platform_driver_unregister(&qcom_cpufreq_driver); +} +module_exit(qcom_cpufreq_exit); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c new file mode 100644 index 000000000..573b417e1 --- /dev/null +++ b/drivers/cpufreq/qoriq-cpufreq.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * CPU Frequency Scaling driver for Freescale QorIQ SoCs. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/cpufreq.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/smp.h> +#include <linux/platform_device.h> + +/** + * struct cpu_data + * @pclk: the parent clock of cpu + * @table: frequency table + */ +struct cpu_data { + struct clk **pclk; + struct cpufreq_frequency_table *table; +}; + +/** + * struct soc_data - SoC specific data + * @flags: SOC_xxx + */ +struct soc_data { + u32 flags; +}; + +static u32 get_bus_freq(void) +{ + struct device_node *soc; + u32 sysfreq; + struct clk *pltclk; + int ret; + + /* get platform freq by searching bus-frequency property */ + soc = of_find_node_by_type(NULL, "soc"); + if (soc) { + ret = of_property_read_u32(soc, "bus-frequency", &sysfreq); + of_node_put(soc); + if (!ret) + return sysfreq; + } + + /* get platform freq by its clock name */ + pltclk = clk_get(NULL, "cg-pll0-div1"); + if (IS_ERR(pltclk)) { + pr_err("%s: can't get bus frequency %ld\n", + __func__, PTR_ERR(pltclk)); + return PTR_ERR(pltclk); + } + + return clk_get_rate(pltclk); +} + +static struct clk *cpu_to_clk(int cpu) +{ + struct device_node *np; + struct clk *clk; + + if (!cpu_present(cpu)) + return NULL; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + return NULL; + + clk = of_clk_get(np, 0); + of_node_put(np); + return clk; +} + +/* traverse cpu nodes to get cpu mask of sharing clock wire */ +static void set_affected_cpus(struct cpufreq_policy *policy) +{ + struct cpumask *dstp = policy->cpus; + struct clk *clk; + int i; + + for_each_present_cpu(i) { + clk = cpu_to_clk(i); + if (IS_ERR(clk)) { + pr_err("%s: no clock for cpu %d\n", __func__, i); + continue; + } + + if (clk_is_match(policy->clk, clk)) + cpumask_set_cpu(i, dstp); + } +} + +/* reduce the duplicated frequencies in frequency table */ +static void freq_table_redup(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j; + + for (i = 1; i < count; i++) { + for (j = 0; j < i; j++) { + if (freq_table[j].frequency == CPUFREQ_ENTRY_INVALID || + freq_table[j].frequency != + freq_table[i].frequency) + continue; + + freq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + break; + } + } +} + +/* sort the frequencies in frequency table in descenting order */ +static void freq_table_sort(struct cpufreq_frequency_table *freq_table, + int count) +{ + int i, j, ind; + unsigned int freq, max_freq; + struct cpufreq_frequency_table table; + + for (i = 0; i < count - 1; i++) { + max_freq = freq_table[i].frequency; + ind = i; + for (j = i + 1; j < count; j++) { + freq = freq_table[j].frequency; + if (freq == CPUFREQ_ENTRY_INVALID || + freq <= max_freq) + continue; + ind = j; + max_freq = freq; + } + + if (ind != i) { + /* exchange the frequencies */ + table.driver_data = freq_table[i].driver_data; + table.frequency = freq_table[i].frequency; + freq_table[i].driver_data = freq_table[ind].driver_data; + freq_table[i].frequency = freq_table[ind].frequency; + freq_table[ind].driver_data = table.driver_data; + freq_table[ind].frequency = table.frequency; + } + } +} + +static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct device_node *np; + int i, count; + u32 freq; + struct clk *clk; + const struct clk_hw *hwclk; + struct cpufreq_frequency_table *table; + struct cpu_data *data; + unsigned int cpu = policy->cpu; + u64 u64temp; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + goto err_np; + + policy->clk = of_clk_get(np, 0); + if (IS_ERR(policy->clk)) { + pr_err("%s: no clock information\n", __func__); + goto err_nomem2; + } + + hwclk = __clk_get_hw(policy->clk); + count = clk_hw_get_num_parents(hwclk); + + data->pclk = kcalloc(count, sizeof(struct clk *), GFP_KERNEL); + if (!data->pclk) + goto err_nomem2; + + table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL); + if (!table) + goto err_pclk; + + for (i = 0; i < count; i++) { + clk = clk_hw_get_parent_by_index(hwclk, i)->clk; + data->pclk[i] = clk; + freq = clk_get_rate(clk); + table[i].frequency = freq / 1000; + table[i].driver_data = i; + } + freq_table_redup(table, count); + freq_table_sort(table, count); + table[i].frequency = CPUFREQ_TABLE_END; + policy->freq_table = table; + data->table = table; + + /* update ->cpus if we have cluster, no harm if not */ + set_affected_cpus(policy); + policy->driver_data = data; + + /* Minimum transition latency is 12 platform clocks */ + u64temp = 12ULL * NSEC_PER_SEC; + do_div(u64temp, get_bus_freq()); + policy->cpuinfo.transition_latency = u64temp + 1; + + of_node_put(np); + + return 0; + +err_pclk: + kfree(data->pclk); +err_nomem2: + kfree(data); +err_np: + of_node_put(np); + + return -ENODEV; +} + +static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct cpu_data *data = policy->driver_data; + + kfree(data->pclk); + kfree(data->table); + kfree(data); + policy->driver_data = NULL; + + return 0; +} + +static int qoriq_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct clk *parent; + struct cpu_data *data = policy->driver_data; + + parent = data->pclk[data->table[index].driver_data]; + return clk_set_parent(policy->clk, parent); +} + +static struct cpufreq_driver qoriq_cpufreq_driver = { + .name = "qoriq_cpufreq", + .flags = CPUFREQ_CONST_LOOPS | + CPUFREQ_IS_COOLING_DEV, + .init = qoriq_cpufreq_cpu_init, + .exit = qoriq_cpufreq_cpu_exit, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = qoriq_cpufreq_target, + .get = cpufreq_generic_get, + .attr = cpufreq_generic_attr, +}; + +static const struct of_device_id qoriq_cpufreq_blacklist[] = { + /* e6500 cannot use cpufreq due to erratum A-008083 */ + { .compatible = "fsl,b4420-clockgen", }, + { .compatible = "fsl,b4860-clockgen", }, + { .compatible = "fsl,t2080-clockgen", }, + { .compatible = "fsl,t4240-clockgen", }, + {} +}; + +static int qoriq_cpufreq_probe(struct platform_device *pdev) +{ + int ret; + struct device_node *np; + + np = of_find_matching_node(NULL, qoriq_cpufreq_blacklist); + if (np) { + of_node_put(np); + dev_info(&pdev->dev, "Disabling due to erratum A-008083"); + return -ENODEV; + } + + ret = cpufreq_register_driver(&qoriq_cpufreq_driver); + if (ret) + return ret; + + dev_info(&pdev->dev, "Freescale QorIQ CPU frequency scaling driver\n"); + return 0; +} + +static int qoriq_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&qoriq_cpufreq_driver); + + return 0; +} + +static struct platform_driver qoriq_cpufreq_platform_driver = { + .driver = { + .name = "qoriq-cpufreq", + }, + .probe = qoriq_cpufreq_probe, + .remove = qoriq_cpufreq_remove, +}; +module_platform_driver(qoriq_cpufreq_platform_driver); + +MODULE_ALIAS("platform:qoriq-cpufreq"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>"); +MODULE_DESCRIPTION("cpufreq driver for Freescale QorIQ series SoCs"); diff --git a/drivers/cpufreq/raspberrypi-cpufreq.c b/drivers/cpufreq/raspberrypi-cpufreq.c new file mode 100644 index 000000000..2bc7d9734 --- /dev/null +++ b/drivers/cpufreq/raspberrypi-cpufreq.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raspberry Pi cpufreq driver + * + * Copyright (C) 2019, Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + */ + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> + +#define RASPBERRYPI_FREQ_INTERVAL 100000000 + +static struct platform_device *cpufreq_dt; + +static int raspberrypi_cpufreq_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + unsigned long min, max; + unsigned long rate; + struct clk *clk; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("Cannot get CPU for cpufreq driver\n"); + return -ENODEV; + } + + clk = clk_get(cpu_dev, NULL); + if (IS_ERR(clk)) { + dev_err(cpu_dev, "Cannot get clock for CPU0\n"); + return PTR_ERR(clk); + } + + /* + * The max and min frequencies are configurable in the Raspberry Pi + * firmware, so we query them at runtime. + */ + min = roundup(clk_round_rate(clk, 0), RASPBERRYPI_FREQ_INTERVAL); + max = roundup(clk_round_rate(clk, ULONG_MAX), RASPBERRYPI_FREQ_INTERVAL); + clk_put(clk); + + for (rate = min; rate <= max; rate += RASPBERRYPI_FREQ_INTERVAL) { + ret = dev_pm_opp_add(cpu_dev, rate, 0); + if (ret) + goto remove_opp; + } + + cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + ret = PTR_ERR_OR_ZERO(cpufreq_dt); + if (ret) { + dev_err(cpu_dev, "Failed to create platform device, %d\n", ret); + goto remove_opp; + } + + return 0; + +remove_opp: + dev_pm_opp_remove_all_dynamic(cpu_dev); + + return ret; +} + +static int raspberrypi_cpufreq_remove(struct platform_device *pdev) +{ + struct device *cpu_dev; + + cpu_dev = get_cpu_device(0); + if (cpu_dev) + dev_pm_opp_remove_all_dynamic(cpu_dev); + + platform_device_unregister(cpufreq_dt); + + return 0; +} + +/* + * Since the driver depends on clk-raspberrypi, which may return EPROBE_DEFER, + * all the activity is performed in the probe, which may be defered as well. + */ +static struct platform_driver raspberrypi_cpufreq_driver = { + .driver = { + .name = "raspberrypi-cpufreq", + }, + .probe = raspberrypi_cpufreq_probe, + .remove = raspberrypi_cpufreq_remove, +}; +module_platform_driver(raspberrypi_cpufreq_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de"); +MODULE_DESCRIPTION("Raspberry Pi cpufreq driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:raspberrypi-cpufreq"); diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c new file mode 100644 index 000000000..5dcfbf0bf --- /dev/null +++ b/drivers/cpufreq/s3c2410-cpufreq.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 CPU Frequency scaling +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#define S3C2410_CLKDIVN_PDIVN (1<<0) +#define S3C2410_CLKDIVN_HDIVN (1<<1) + +/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ + +static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + u32 clkdiv = 0; + + if (cfg->divs.h_divisor == 2) + clkdiv |= S3C2410_CLKDIVN_HDIVN; + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2410_CLKDIVN_PDIVN; + + s3c24xx_write_clkdivn(clkdiv); +} + +static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long hclk, fclk, pclk; + unsigned int hdiv, pdiv; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + hclk_max = cfg->max.hclk; + + cfg->freq.armclk = fclk; + + s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", + __func__, fclk, hclk_max); + + hdiv = (fclk > cfg->max.hclk) ? 2 : 1; + hclk = fclk / hdiv; + + if (hclk > cfg->max.hclk) { + s3c_freq_dbg("%s: hclk too big\n", __func__); + return -EINVAL; + } + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + pclk = hclk / pdiv; + + if (pclk > cfg->max.pclk) { + s3c_freq_dbg("%s: pclk too big\n", __func__); + return -EINVAL; + } + + pdiv *= hdiv; + + /* record the result */ + cfg->divs.p_divisor = pdiv; + cfg->divs.h_divisor = hdiv; + + return 0; +} + +static struct s3c_cpufreq_info s3c2410_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + /* transition latency is about 5ms worst-case, so + * set 10ms to be sure */ + .latency = 10000000, + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 12, + + .need_pll = 1, + + .name = "s3c2410", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + + .set_fvco = s3c2410_set_fvco, + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2410_cpufreq_setdivs, + .calc_divs = s3c2410_cpufreq_calcdivs, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), +}; + +static int s3c2410_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + return s3c_cpufreq_register(&s3c2410_cpufreq_info); +} + +static struct subsys_interface s3c2410_cpufreq_interface = { + .name = "s3c2410_cpufreq", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_cpufreq_add, +}; + +static int __init s3c2410_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2410_cpufreq_interface); +} +arch_initcall(s3c2410_cpufreq_init); + +static int s3c2410a_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + /* alter the maximum freq settings for S3C2410A. If a board knows + * it only has a maximum of 200, then it should register its own + * limits. */ + + s3c2410_cpufreq_info.max.fclk = 266000000; + s3c2410_cpufreq_info.max.hclk = 133000000; + s3c2410_cpufreq_info.max.pclk = 66500000; + s3c2410_cpufreq_info.name = "s3c2410a"; + + return s3c2410_cpufreq_add(dev, sif); +} + +static struct subsys_interface s3c2410a_cpufreq_interface = { + .name = "s3c2410a_cpufreq", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410a_cpufreq_add, +}; + +static int __init s3c2410a_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2410a_cpufreq_interface); +} +arch_initcall(s3c2410a_cpufreq_init); diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c new file mode 100644 index 000000000..5945945ea --- /dev/null +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2412 CPU Frequency scalling +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#define S3C2412_CLKDIVN_PDIVN (1<<2) +#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) +#define S3C2412_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_DVSEN (1<<4) +#define S3C2412_CLKDIVN_HALFHCLK (1<<5) +#define S3C2412_CLKDIVN_USB48DIV (1<<6) +#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) +#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) +#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) +#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) +#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) +#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) + +/* our clock resources. */ +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv, armdiv, dvs; + unsigned long hclk, fclk, armclk, armdiv_clk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + /* We can't run hclk above armclk as at the best we have to + * have armclk and hclk in dvs mode. */ + + if (hclk_max > armclk) + hclk_max = armclk; + + s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", + __func__, fclk, armclk, hclk_max); + s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", + __func__, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->freq.pclk); + + armdiv = fclk / armclk; + + if (armdiv < 1) + armdiv = 1; + if (armdiv > 2) + armdiv = 2; + + cfg->divs.arm_divisor = armdiv; + armdiv_clk = fclk / armdiv; + + hdiv = armdiv_clk / hclk_max; + if (hdiv < 1) + hdiv = 1; + + cfg->freq.hclk = hclk = armdiv_clk / hdiv; + + /* set dvs depending on whether we reached armclk or not. */ + cfg->divs.dvs = dvs = armclk < armdiv_clk; + + /* update the actual armclk we achieved. */ + cfg->freq.armclk = dvs ? hclk : armdiv_clk; + + s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", + __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); + + if (hdiv > 4) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + cfg->freq.pclk = hclk / pdiv; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv * armdiv; + cfg->divs.p_divisor = pdiv * armdiv; + + return 0; + +invalid: + return -EINVAL; +} + +static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv; + unsigned long olddiv; + + olddiv = clkdiv = s3c24xx_read_clkdivn(); + + /* clear off current clock info */ + + clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; + clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; + clkdiv &= ~S3C2412_CLKDIVN_PDIVN; + + if (cfg->divs.arm_divisor == 2) + clkdiv |= S3C2412_CLKDIVN_ARMDIVN; + + clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2412_CLKDIVN_PDIVN; + + s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); + s3c24xx_write_clkdivn(clkdiv); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +/* set the default cpu frequency information, based on an 200MHz part + * as we have no other way of detecting the speed rating in software. + */ + +static struct s3c_cpufreq_info s3c2412_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + .latency = 5000000, /* 5ms */ + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 16, + + .name = "s3c2412", + .set_refresh = s3c2412_cpufreq_setrefresh, + .set_divs = s3c2412_cpufreq_setdivs, + .calc_divs = s3c2412_cpufreq_calcdivs, + + .calc_iotiming = s3c2412_iotiming_calc, + .set_iotiming = s3c2412_iotiming_set, + .get_iotiming = s3c2412_iotiming_get, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), +}; + +static int s3c2412_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + unsigned long fclk_rate; + + hclk = clk_get(NULL, "hclk"); + if (IS_ERR(hclk)) { + pr_err("cannot find hclk clock\n"); + return -ENOENT; + } + + fclk = clk_get(NULL, "fclk"); + if (IS_ERR(fclk)) { + pr_err("cannot find fclk clock\n"); + goto err_fclk; + } + + fclk_rate = clk_get_rate(fclk); + if (fclk_rate > 200000000) { + pr_info("fclk %ld MHz, assuming 266MHz capable part\n", + fclk_rate / 1000000); + s3c2412_cpufreq_info.max.fclk = 266000000; + s3c2412_cpufreq_info.max.hclk = 133000000; + s3c2412_cpufreq_info.max.pclk = 66000000; + } + + armclk = clk_get(NULL, "armclk"); + if (IS_ERR(armclk)) { + pr_err("cannot find arm clock\n"); + goto err_armclk; + } + + xtal = clk_get(NULL, "xtal"); + if (IS_ERR(xtal)) { + pr_err("cannot find xtal clock\n"); + goto err_xtal; + } + + return s3c_cpufreq_register(&s3c2412_cpufreq_info); + +err_xtal: + clk_put(armclk); +err_armclk: + clk_put(fclk); +err_fclk: + clk_put(hclk); + + return -ENOENT; +} + +static struct subsys_interface s3c2412_cpufreq_interface = { + .name = "s3c2412_cpufreq", + .subsys = &s3c2412_subsys, + .add_dev = s3c2412_cpufreq_add, +}; + +static int s3c2412_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2412_cpufreq_interface); +} +arch_initcall(s3c2412_cpufreq_init); diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c new file mode 100644 index 000000000..5c221bc90 --- /dev/null +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * S3C2416/2450 CPUfreq Support + * + * Copyright 2011 Heiko Stuebner <heiko@sntech.de> + * + * based on s3c64xx_cpufreq.c + * + * Copyright 2009 Wolfson Microelectronics plc + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +#include <linux/reboot.h> +#include <linux/module.h> + +static DEFINE_MUTEX(cpufreq_lock); + +struct s3c2416_data { + struct clk *armdiv; + struct clk *armclk; + struct clk *hclk; + + unsigned long regulator_latency; +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + struct regulator *vddarm; +#endif + + struct cpufreq_frequency_table *freq_table; + + bool is_dvs; + bool disable_dvs; +}; + +static struct s3c2416_data s3c2416_cpufreq; + +struct s3c2416_dvfs { + unsigned int vddarm_min; + unsigned int vddarm_max; +}; + +/* pseudo-frequency for dvs mode */ +#define FREQ_DVS 132333 + +/* frequency to sleep and reboot in + * it's essential to leave dvs, as some boards do not reconfigure the + * regulator on reboot + */ +#define FREQ_SLEEP 133333 + +/* Sources for the ARMCLK */ +#define SOURCE_HCLK 0 +#define SOURCE_ARMDIV 1 + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE +/* S3C2416 only supports changing the voltage in the dvs-mode. + * Voltages down to 1.0V seem to work, so we take what the regulator + * can get us. + */ +static struct s3c2416_dvfs s3c2416_dvfs_table[] = { + [SOURCE_HCLK] = { 950000, 1250000 }, + [SOURCE_ARMDIV] = { 1250000, 1350000 }, +}; +#endif + +static struct cpufreq_frequency_table s3c2416_freq_table[] = { + { 0, SOURCE_HCLK, FREQ_DVS }, + { 0, SOURCE_ARMDIV, 133333 }, + { 0, SOURCE_ARMDIV, 266666 }, + { 0, SOURCE_ARMDIV, 400000 }, + { 0, 0, CPUFREQ_TABLE_END }, +}; + +static struct cpufreq_frequency_table s3c2450_freq_table[] = { + { 0, SOURCE_HCLK, FREQ_DVS }, + { 0, SOURCE_ARMDIV, 133500 }, + { 0, SOURCE_ARMDIV, 267000 }, + { 0, SOURCE_ARMDIV, 534000 }, + { 0, 0, CPUFREQ_TABLE_END }, +}; + +static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + + if (cpu != 0) + return 0; + + /* return our pseudo-frequency when in dvs mode */ + if (s3c_freq->is_dvs) + return FREQ_DVS; + + return clk_get_rate(s3c_freq->armclk) / 1000; +} + +static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq, + unsigned int freq) +{ + int ret; + + if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) { + ret = clk_set_rate(s3c_freq->armdiv, freq * 1000); + if (ret < 0) { + pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n", + freq, ret); + return ret; + } + } + + return 0; +} + +static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx) +{ +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + struct s3c2416_dvfs *dvfs; +#endif + int ret; + + if (s3c_freq->is_dvs) { + pr_debug("cpufreq: already in dvs mode, nothing to do\n"); + return 0; + } + + pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n", + clk_get_rate(s3c_freq->hclk) / 1000); + ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk); + if (ret < 0) { + pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret); + return ret; + } + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + /* changing the core voltage is only allowed when in dvs mode */ + if (s3c_freq->vddarm) { + dvfs = &s3c2416_dvfs_table[idx]; + + pr_debug("cpufreq: setting regulator to %d-%d\n", + dvfs->vddarm_min, dvfs->vddarm_max); + ret = regulator_set_voltage(s3c_freq->vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + + /* when lowering the voltage failed, there is nothing to do */ + if (ret != 0) + pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); + } +#endif + + s3c_freq->is_dvs = 1; + + return 0; +} + +static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) +{ +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + struct s3c2416_dvfs *dvfs; +#endif + int ret; + + if (!s3c_freq->is_dvs) { + pr_debug("cpufreq: not in dvs mode, so can't leave\n"); + return 0; + } + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + if (s3c_freq->vddarm) { + dvfs = &s3c2416_dvfs_table[idx]; + + pr_debug("cpufreq: setting regulator to %d-%d\n", + dvfs->vddarm_min, dvfs->vddarm_max); + ret = regulator_set_voltage(s3c_freq->vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("cpufreq: Failed to set VDDARM: %d\n", ret); + return ret; + } + } +#endif + + /* force armdiv to hclk frequency for transition from dvs*/ + if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) { + pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n", + clk_get_rate(s3c_freq->hclk) / 1000); + ret = s3c2416_cpufreq_set_armdiv(s3c_freq, + clk_get_rate(s3c_freq->hclk) / 1000); + if (ret < 0) { + pr_err("cpufreq: Failed to set the armdiv to %lukHz: %d\n", + clk_get_rate(s3c_freq->hclk) / 1000, ret); + return ret; + } + } + + pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n", + clk_get_rate(s3c_freq->armdiv) / 1000); + + ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv); + if (ret < 0) { + pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n", + ret); + return ret; + } + + s3c_freq->is_dvs = 0; + + return 0; +} + +static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + unsigned int new_freq; + int idx, ret, to_dvs = 0; + + mutex_lock(&cpufreq_lock); + + idx = s3c_freq->freq_table[index].driver_data; + + if (idx == SOURCE_HCLK) + to_dvs = 1; + + /* switching to dvs when it's not allowed */ + if (to_dvs && s3c_freq->disable_dvs) { + pr_debug("cpufreq: entering dvs mode not allowed\n"); + ret = -EINVAL; + goto out; + } + + /* When leavin dvs mode, always switch the armdiv to the hclk rate + * The S3C2416 has stability issues when switching directly to + * higher frequencies. + */ + new_freq = (s3c_freq->is_dvs && !to_dvs) + ? clk_get_rate(s3c_freq->hclk) / 1000 + : s3c_freq->freq_table[index].frequency; + + if (to_dvs) { + pr_debug("cpufreq: enter dvs\n"); + ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx); + } else if (s3c_freq->is_dvs) { + pr_debug("cpufreq: leave dvs\n"); + ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx); + } else { + pr_debug("cpufreq: change armdiv to %dkHz\n", new_freq); + ret = s3c2416_cpufreq_set_armdiv(s3c_freq, new_freq); + } + +out: + mutex_unlock(&cpufreq_lock); + + return ret; +} + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE +static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq) +{ + int count, v, i, found; + struct cpufreq_frequency_table *pos; + struct s3c2416_dvfs *dvfs; + + count = regulator_count_voltages(s3c_freq->vddarm); + if (count < 0) { + pr_err("cpufreq: Unable to check supported voltages\n"); + return; + } + + if (!count) + goto out; + + cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) { + dvfs = &s3c2416_dvfs_table[pos->driver_data]; + found = 0; + + /* Check only the min-voltage, more is always ok on S3C2416 */ + for (i = 0; i < count; i++) { + v = regulator_list_voltage(s3c_freq->vddarm, i); + if (v >= dvfs->vddarm_min) + found = 1; + } + + if (!found) { + pr_debug("cpufreq: %dkHz unsupported by regulator\n", + pos->frequency); + pos->frequency = CPUFREQ_ENTRY_INVALID; + } + } + +out: + /* Guessed */ + s3c_freq->regulator_latency = 1 * 1000 * 1000; +} +#endif + +static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + int ret; + struct cpufreq_policy *policy; + + mutex_lock(&cpufreq_lock); + + /* disable further changes */ + s3c_freq->disable_dvs = 1; + + mutex_unlock(&cpufreq_lock); + + /* some boards don't reconfigure the regulator on reboot, which + * could lead to undervolting the cpu when the clock is reset. + * Therefore we always leave the DVS mode on reboot. + */ + if (s3c_freq->is_dvs) { + pr_debug("cpufreq: leave dvs on reboot\n"); + + policy = cpufreq_cpu_get(0); + if (!policy) { + pr_debug("cpufreq: get no policy for cpu0\n"); + return NOTIFY_BAD; + } + + ret = cpufreq_driver_target(policy, FREQ_SLEEP, 0); + cpufreq_cpu_put(policy); + + if (ret < 0) + return NOTIFY_BAD; + } + + return NOTIFY_DONE; +} + +static struct notifier_block s3c2416_cpufreq_reboot_notifier = { + .notifier_call = s3c2416_cpufreq_reboot_notifier_evt, +}; + +static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; + struct cpufreq_frequency_table *pos; + struct clk *msysclk; + unsigned long rate; + int ret; + + if (policy->cpu != 0) + return -EINVAL; + + msysclk = clk_get(NULL, "msysclk"); + if (IS_ERR(msysclk)) { + ret = PTR_ERR(msysclk); + pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret); + return ret; + } + + /* + * S3C2416 and S3C2450 share the same processor-ID and also provide no + * other means to distinguish them other than through the rate of + * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz. + */ + rate = clk_get_rate(msysclk); + if (rate == 800 * 1000 * 1000) { + pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n", + rate / 1000); + s3c_freq->freq_table = s3c2416_freq_table; + policy->cpuinfo.max_freq = 400000; + } else if (rate / 1000 == 534000) { + pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n", + rate / 1000); + s3c_freq->freq_table = s3c2450_freq_table; + policy->cpuinfo.max_freq = 534000; + } + + /* not needed anymore */ + clk_put(msysclk); + + if (s3c_freq->freq_table == NULL) { + pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n", + rate / 1000); + return -ENODEV; + } + + s3c_freq->is_dvs = 0; + + s3c_freq->armdiv = clk_get(NULL, "armdiv"); + if (IS_ERR(s3c_freq->armdiv)) { + ret = PTR_ERR(s3c_freq->armdiv); + pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret); + return ret; + } + + s3c_freq->hclk = clk_get(NULL, "hclk"); + if (IS_ERR(s3c_freq->hclk)) { + ret = PTR_ERR(s3c_freq->hclk); + pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret); + goto err_hclk; + } + + /* chech hclk rate, we only support the common 133MHz for now + * hclk could also run at 66MHz, but this not often used + */ + rate = clk_get_rate(s3c_freq->hclk); + if (rate < 133 * 1000 * 1000) { + pr_err("cpufreq: HCLK not at 133MHz\n"); + ret = -EINVAL; + goto err_armclk; + } + + s3c_freq->armclk = clk_get(NULL, "armclk"); + if (IS_ERR(s3c_freq->armclk)) { + ret = PTR_ERR(s3c_freq->armclk); + pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret); + goto err_armclk; + } + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE + s3c_freq->vddarm = regulator_get(NULL, "vddarm"); + if (IS_ERR(s3c_freq->vddarm)) { + ret = PTR_ERR(s3c_freq->vddarm); + pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); + goto err_vddarm; + } + + s3c2416_cpufreq_cfg_regulator(s3c_freq); +#else + s3c_freq->regulator_latency = 0; +#endif + + cpufreq_for_each_entry(pos, s3c_freq->freq_table) { + /* special handling for dvs mode */ + if (pos->driver_data == 0) { + if (!s3c_freq->hclk) { + pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n", + pos->frequency); + pos->frequency = CPUFREQ_ENTRY_INVALID; + } else { + continue; + } + } + + /* Check for frequencies we can generate */ + rate = clk_round_rate(s3c_freq->armdiv, + pos->frequency * 1000); + rate /= 1000; + if (rate != pos->frequency) { + pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n", + pos->frequency, rate); + pos->frequency = CPUFREQ_ENTRY_INVALID; + } + } + + /* Datasheet says PLL stabalisation time must be at least 300us, + * so but add some fudge. (reference in LOCKCON0 register description) + */ + cpufreq_generic_init(policy, s3c_freq->freq_table, + (500 * 1000) + s3c_freq->regulator_latency); + register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier); + + return 0; + +#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE +err_vddarm: + clk_put(s3c_freq->armclk); +#endif +err_armclk: + clk_put(s3c_freq->hclk); +err_hclk: + clk_put(s3c_freq->armdiv); + + return ret; +} + +static struct cpufreq_driver s3c2416_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s3c2416_cpufreq_set_target, + .get = s3c2416_cpufreq_get_speed, + .init = s3c2416_cpufreq_driver_init, + .name = "s3c2416", + .attr = cpufreq_generic_attr, +}; + +static int __init s3c2416_cpufreq_init(void) +{ + return cpufreq_register_driver(&s3c2416_cpufreq_driver); +} +module_init(s3c2416_cpufreq_init); diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c new file mode 100644 index 000000000..2011fb9c0 --- /dev/null +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@simtec.co.uk> + * + * S3C2440/S3C2442 CPU Frequency scaling +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#define S3C2440_CLKDIVN_PDIVN (1<<0) +#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) +#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) +#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) +#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) +#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) +#define S3C2440_CLKDIVN_UCLK (1<<3) + +#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) +#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) +#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) +#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) +#define S3C2440_CAMDIVN_DVSEN (1<<12) + +#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) + +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static inline int within_khz(unsigned long a, unsigned long b) +{ + long diff = a - b; + + return (diff >= -1000 && diff <= 1000); +} + +/** + * s3c2440_cpufreq_calcdivs - calculate divider settings + * @cfg: The cpu frequency settings. + * + * Calcualte the divider values for the given frequency settings + * specified in @cfg. The values are stored in @cfg for later use + * by the relevant set routine if the request settings can be reached. + */ +static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv; + unsigned long hclk, fclk, armclk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", + __func__, fclk, armclk, hclk_max); + + if (armclk > fclk) { + pr_warn("%s: armclk > fclk\n", __func__); + armclk = fclk; + } + + /* if we are in DVS, we need HCLK to be <= ARMCLK */ + if (armclk < fclk && armclk < hclk_max) + hclk_max = armclk; + + for (hdiv = 1; hdiv < 9; hdiv++) { + if (hdiv == 5 || hdiv == 7) + hdiv++; + + hclk = (fclk / hdiv); + if (hclk <= hclk_max || within_khz(hclk, hclk_max)) + break; + } + + s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); + + if (hdiv > 8) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* calculate a valid armclk */ + + if (armclk < hclk) + armclk = hclk; + + /* if we're running armclk lower than fclk, this really means + * that the system should go into dvs mode, which means that + * armclk is connected to hclk. */ + if (armclk < fclk) { + cfg->divs.dvs = 1; + armclk = hclk; + } else + cfg->divs.dvs = 0; + + cfg->freq.armclk = armclk; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv; + cfg->divs.p_divisor = pdiv; + + return 0; + + invalid: + return -EINVAL; +} + +#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ + S3C2440_CAMDIVN_HCLK4_HALF) + +/** + * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings + * @cfg: The cpu frequency settings. + * + * Set the divisors from the settings in @cfg, which where generated + * during the calculation phase by s3c2440_cpufreq_calcdivs(). + */ +static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv, camdiv; + + s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__, + cfg->divs.h_divisor, cfg->divs.p_divisor); + + clkdiv = s3c24xx_read_clkdivn(); + camdiv = s3c2440_read_camdivn(); + + clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); + camdiv &= ~CAMDIVN_HCLK_HALF; + + switch (cfg->divs.h_divisor) { + case 1: + clkdiv |= S3C2440_CLKDIVN_HDIVN_1; + break; + + case 2: + clkdiv |= S3C2440_CLKDIVN_HDIVN_2; + break; + + case 6: + camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; + fallthrough; + case 3: + clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; + break; + + case 8: + camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; + fallthrough; + case 4: + clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; + break; + + default: + BUG(); /* we don't expect to get here. */ + } + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2440_CLKDIVN_PDIVN; + + /* todo - set pclk. */ + + /* Write the divisors first with hclk intentionally halved so that + * when we write clkdiv we will under-frequency instead of over. We + * then make a short delay and remove the hclk halving if necessary. + */ + + s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF); + s3c24xx_write_clkdivn(clkdiv); + + ndelay(20); + s3c2440_write_camdivn(camdiv); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +static int run_freq_for(unsigned long max_hclk, unsigned long fclk, + int *divs, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + unsigned long freq; + int index = 0; + int div; + + for (div = *divs; div > 0; div = *divs++) { + freq = fclk / div; + + if (freq > max_hclk && div != 1) + continue; + + freq /= 1000; /* table is in kHz */ + index = s3c_cpufreq_addfreq(table, index, table_size, freq); + if (index < 0) + break; + } + + return index; +} + +static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; + +static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + int ret; + + WARN_ON(cfg->info == NULL); + WARN_ON(cfg->board == NULL); + + ret = run_freq_for(cfg->info->max.hclk, + cfg->info->max.fclk, + hclk_divs, + table, table_size); + + s3c_freq_dbg("%s: returning %d\n", __func__, ret); + + return ret; +} + +static struct s3c_cpufreq_info s3c2440_cpufreq_info = { + .max = { + .fclk = 400000000, + .hclk = 133333333, + .pclk = 66666666, + }, + + .locktime_m = 300, + .locktime_u = 300, + .locktime_bits = 16, + + .name = "s3c244x", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + .set_fvco = s3c2410_set_fvco, + + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2440_cpufreq_setdivs, + .calc_divs = s3c2440_cpufreq_calcdivs, + .calc_freqtable = s3c2440_cpufreq_calctable, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), +}; + +static int s3c2440_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + armclk = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { + pr_err("%s: failed to get clocks\n", __func__); + return -ENOENT; + } + + return s3c_cpufreq_register(&s3c2440_cpufreq_info); +} + +static struct subsys_interface s3c2440_cpufreq_interface = { + .name = "s3c2440_cpufreq", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_cpufreq_add, +}; + +static int s3c2440_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2440_cpufreq_interface); +} + +/* arch_initcall adds the clocks we need, so use subsys_initcall. */ +subsys_initcall(s3c2440_cpufreq_init); + +static struct subsys_interface s3c2442_cpufreq_interface = { + .name = "s3c2442_cpufreq", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_cpufreq_add, +}; + +static int s3c2442_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2442_cpufreq_interface); +} +subsys_initcall(s3c2442_cpufreq_init); diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c new file mode 100644 index 000000000..93971dfe7 --- /dev/null +++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX CPU Frequency scaling - debugfs status support +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/err.h> + +#include <linux/soc/samsung/s3c-cpufreq-core.h> + +static struct dentry *dbgfs_root; +static struct dentry *dbgfs_file_io; +static struct dentry *dbgfs_file_info; +static struct dentry *dbgfs_file_board; + +#define print_ns(x) ((x) / 10), ((x) % 10) + +static void show_max(struct seq_file *seq, struct s3c_freq *f) +{ + seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", + f->fclk, f->hclk, f->pclk, f->armclk); +} + +static int board_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + struct s3c_cpufreq_board *brd; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + brd = cfg->board; + if (!brd) { + seq_printf(seq, "no board definition set?\n"); + return 0; + } + + seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); + seq_printf(seq, "auto_io=%u\n", brd->auto_io); + seq_printf(seq, "need_io=%u\n", brd->need_io); + + show_max(seq, &brd->max); + + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(board); + +static int info_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); + seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", + cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); + seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); + seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); + seq_printf(seq, "\n"); + + show_max(seq, &cfg->max); + + seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", + cfg->divs.h_divisor, cfg->divs.p_divisor, + cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); + seq_printf(seq, "\n"); + + seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(info); + +static int io_show(struct seq_file *seq, void *p) +{ + void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); + struct s3c_cpufreq_config *cfg; + struct s3c_iotimings *iot; + union s3c_iobank *iob; + int bank; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + show_bank = cfg->info->debug_io_show; + if (!show_bank) { + seq_printf(seq, "no code to show bank timing\n"); + return 0; + } + + iot = s3c_cpufreq_getiotimings(); + if (!iot) { + seq_printf(seq, "no io timings registered\n"); + return 0; + } + + seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); + + for (bank = 0; bank < MAX_BANKS; bank++) { + iob = &iot->bank[bank]; + + seq_printf(seq, "bank %d: ", bank); + + if (!iob->io_2410) { + seq_printf(seq, "nothing set\n"); + continue; + } + + show_bank(seq, cfg, iob); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(io); + +static int __init s3c_freq_debugfs_init(void) +{ + dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); + if (IS_ERR(dbgfs_root)) { + pr_err("%s: error creating debugfs root\n", __func__); + return PTR_ERR(dbgfs_root); + } + + dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, + NULL, &io_fops); + + dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, + NULL, &info_fops); + + dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, + NULL, &board_fops); + + return 0; +} + +late_initcall(s3c_freq_debugfs_init); + diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c new file mode 100644 index 000000000..7380c32b2 --- /dev/null +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX CPU Frequency scaling +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/cpufreq.h> +#include <linux/cpu.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <linux/slab.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +/* note, cpufreq support deals in kHz, no Hz */ +static struct cpufreq_driver s3c24xx_driver; +static struct s3c_cpufreq_config cpu_cur; +static struct s3c_iotimings s3c24xx_iotiming; +static struct cpufreq_frequency_table *pll_reg; +static unsigned int last_target = ~0; +static unsigned int ftab_size; +static struct cpufreq_frequency_table *ftab; + +static struct clk *_clk_mpll; +static struct clk *_clk_xtal; +static struct clk *clk_fclk; +static struct clk *clk_hclk; +static struct clk *clk_pclk; +static struct clk *clk_arm; + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS +struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) +{ + return &cpu_cur; +} + +struct s3c_iotimings *s3c_cpufreq_getiotimings(void) +{ + return &s3c24xx_iotiming; +} +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */ + +static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) +{ + unsigned long fclk, pclk, hclk, armclk; + + cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); + cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); + cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); + cfg->freq.armclk = armclk = clk_get_rate(clk_arm); + + cfg->pll.driver_data = s3c24xx_read_mpllcon(); + cfg->pll.frequency = fclk; + + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); + + cfg->divs.h_divisor = fclk / hclk; + cfg->divs.p_divisor = fclk / pclk; +} + +static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) +{ + unsigned long pll = cfg->pll.frequency; + + cfg->freq.fclk = pll; + cfg->freq.hclk = pll / cfg->divs.h_divisor; + cfg->freq.pclk = pll / cfg->divs.p_divisor; + + /* convert hclk into 10ths of nanoseconds for io calcs */ + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); +} + +static inline int closer(unsigned int target, unsigned int n, unsigned int c) +{ + int diff_cur = abs(target - c); + int diff_new = abs(target - n); + + return (diff_new < diff_cur); +} + +static void s3c_cpufreq_show(const char *pfx, + struct s3c_cpufreq_config *cfg) +{ + s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", + pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->divs.h_divisor, + cfg->freq.pclk, cfg->divs.p_divisor); +} + +/* functions to wrapper the driver info calls to do the cpu specific work */ + +static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->set_iotiming) + (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); +} + +static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->calc_iotiming) + return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); + + return 0; +} + +static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_refresh)(cfg); +} + +static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_divs)(cfg); +} + +static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + return (cfg->info->calc_divs)(cfg); +} + +static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) +{ + cfg->mpll = _clk_mpll; + (cfg->info->set_fvco)(cfg); +} + +static inline void s3c_cpufreq_updateclk(struct clk *clk, + unsigned int freq) +{ + clk_set_rate(clk, freq); +} + +static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, + unsigned int target_freq, + struct cpufreq_frequency_table *pll) +{ + struct s3c_cpufreq_freqs freqs; + struct s3c_cpufreq_config cpu_new; + unsigned long flags; + + cpu_new = cpu_cur; /* copy new from current */ + + s3c_cpufreq_show("cur", &cpu_cur); + + /* TODO - check for DMA currently outstanding */ + + cpu_new.pll = pll ? *pll : cpu_cur.pll; + + if (pll) + freqs.pll_changing = 1; + + /* update our frequencies */ + + cpu_new.freq.armclk = target_freq; + cpu_new.freq.fclk = cpu_new.pll.frequency; + + if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { + pr_err("no divisors for %d\n", target_freq); + goto err_notpossible; + } + + s3c_freq_dbg("%s: got divs\n", __func__); + + s3c_cpufreq_calc(&cpu_new); + + s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); + + if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { + if (s3c_cpufreq_calcio(&cpu_new) < 0) { + pr_err("%s: no IO timings\n", __func__); + goto err_notpossible; + } + } + + s3c_cpufreq_show("new", &cpu_new); + + /* setup our cpufreq parameters */ + + freqs.old = cpu_cur.freq; + freqs.new = cpu_new.freq; + + freqs.freqs.old = cpu_cur.freq.armclk / 1000; + freqs.freqs.new = cpu_new.freq.armclk / 1000; + + /* update f/h/p clock settings before we issue the change + * notification, so that drivers do not need to do anything + * special if they want to recalculate on CPUFREQ_PRECHANGE. */ + + s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); + s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); + s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); + s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); + + /* start the frequency change */ + cpufreq_freq_transition_begin(policy, &freqs.freqs); + + /* If hclk is staying the same, then we do not need to + * re-write the IO or the refresh timings whilst we are changing + * speed. */ + + local_irq_save(flags); + + /* is our memory clock slowing down? */ + if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { + /* not changing PLL, just set the divisors */ + + s3c_cpufreq_setdivs(&cpu_new); + } else { + if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { + /* slow the cpu down, then set divisors */ + + s3c_cpufreq_setfvco(&cpu_new); + s3c_cpufreq_setdivs(&cpu_new); + } else { + /* set the divisors, then speed up */ + + s3c_cpufreq_setdivs(&cpu_new); + s3c_cpufreq_setfvco(&cpu_new); + } + } + + /* did our memory clock speed up */ + if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + /* update our current settings */ + cpu_cur = cpu_new; + + local_irq_restore(flags); + + /* notify everyone we've done this */ + cpufreq_freq_transition_end(policy, &freqs.freqs, 0); + + s3c_freq_dbg("%s: finished\n", __func__); + return 0; + + err_notpossible: + pr_err("no compatible settings for %d\n", target_freq); + return -EINVAL; +} + +/* s3c_cpufreq_target + * + * called by the cpufreq core to adjust the frequency that the CPU + * is currently running at. + */ + +static int s3c_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_frequency_table *pll; + unsigned int index; + + /* avoid repeated calls which cause a needless amout of duplicated + * logging output (and CPU time as the calculation process is + * done) */ + if (target_freq == last_target) + return 0; + + last_target = target_freq; + + s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", + __func__, policy, target_freq, relation); + + if (ftab) { + index = cpufreq_frequency_table_target(policy, target_freq, + relation); + + s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, + target_freq, index, ftab[index].frequency); + target_freq = ftab[index].frequency; + } + + target_freq *= 1000; /* convert target to Hz */ + + /* find the settings for our new frequency */ + + if (!pll_reg || cpu_cur.lock_pll) { + /* either we've not got any PLL values, or we've locked + * to the current one. */ + pll = NULL; + } else { + struct cpufreq_policy tmp_policy; + + /* we keep the cpu pll table in Hz, to ensure we get an + * accurate value for the PLL output. */ + + tmp_policy.min = policy->min * 1000; + tmp_policy.max = policy->max * 1000; + tmp_policy.cpu = policy->cpu; + tmp_policy.freq_table = pll_reg; + + /* cpufreq_frequency_table_target returns the index + * of the table entry, not the value of + * the table entry's index field. */ + + index = cpufreq_frequency_table_target(&tmp_policy, target_freq, + relation); + pll = pll_reg + index; + + s3c_freq_dbg("%s: target %u => %u\n", + __func__, target_freq, pll->frequency); + + target_freq = pll->frequency; + } + + return s3c_cpufreq_settarget(policy, target_freq, pll); +} + +struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) +{ + struct clk *clk; + + clk = clk_get(dev, name); + if (IS_ERR(clk)) + pr_err("failed to get clock '%s'\n", name); + + return clk; +} + +static int s3c_cpufreq_init(struct cpufreq_policy *policy) +{ + policy->clk = clk_arm; + policy->cpuinfo.transition_latency = cpu_cur.info->latency; + policy->freq_table = ftab; + + return 0; +} + +static int __init s3c_cpufreq_initclks(void) +{ + _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); + _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); + clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || + IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { + pr_err("%s: could not get clock(s)\n", __func__); + return -ENOENT; + } + + pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", + __func__, + clk_get_rate(clk_fclk) / 1000, + clk_get_rate(clk_hclk) / 1000, + clk_get_rate(clk_pclk) / 1000, + clk_get_rate(clk_arm) / 1000); + + return 0; +} + +#ifdef CONFIG_PM +static struct cpufreq_frequency_table suspend_pll; +static unsigned int suspend_freq; + +static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) +{ + suspend_pll.frequency = clk_get_rate(_clk_mpll); + suspend_pll.driver_data = s3c24xx_read_mpllcon(); + suspend_freq = clk_get_rate(clk_arm); + + return 0; +} + +static int s3c_cpufreq_resume(struct cpufreq_policy *policy) +{ + int ret; + + s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); + + last_target = ~0; /* invalidate last_target setting */ + + /* whilst we will be called later on, we try and re-set the + * cpu frequencies as soon as possible so that we do not end + * up resuming devices and then immediately having to re-set + * a number of settings once these devices have restarted. + * + * as a note, it is expected devices are not used until they + * have been un-suspended and at that time they should have + * used the updated clock settings. + */ + + ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); + if (ret) { + pr_err("%s: failed to reset pll/freq\n", __func__); + return ret; + } + + return 0; +} +#else +#define s3c_cpufreq_resume NULL +#define s3c_cpufreq_suspend NULL +#endif + +static struct cpufreq_driver s3c24xx_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .target = s3c_cpufreq_target, + .get = cpufreq_generic_get, + .init = s3c_cpufreq_init, + .suspend = s3c_cpufreq_suspend, + .resume = s3c_cpufreq_resume, + .name = "s3c24xx", +}; + + +int s3c_cpufreq_register(struct s3c_cpufreq_info *info) +{ + if (!info || !info->name) { + pr_err("%s: failed to pass valid information\n", __func__); + return -EINVAL; + } + + pr_info("S3C24XX CPU Frequency driver, %s cpu support\n", + info->name); + + /* check our driver info has valid data */ + + BUG_ON(info->set_refresh == NULL); + BUG_ON(info->set_divs == NULL); + BUG_ON(info->calc_divs == NULL); + + /* info->set_fvco is optional, depending on whether there + * is a need to set the clock code. */ + + cpu_cur.info = info; + + /* Note, driver registering should probably update locktime */ + + return 0; +} + +int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + struct s3c_cpufreq_board *ours; + + if (!board) { + pr_info("%s: no board data\n", __func__); + return -EINVAL; + } + + /* Copy the board information so that each board can make this + * initdata. */ + + ours = kzalloc(sizeof(*ours), GFP_KERNEL); + if (!ours) + return -ENOMEM; + + *ours = *board; + cpu_cur.board = ours; + + return 0; +} + +static int __init s3c_cpufreq_auto_io(void) +{ + int ret; + + if (!cpu_cur.info->get_iotiming) { + pr_err("%s: get_iotiming undefined\n", __func__); + return -ENOENT; + } + + pr_info("%s: working out IO settings\n", __func__); + + ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); + if (ret) + pr_err("%s: failed to get timings\n", __func__); + + return ret; +} + +/* if one or is zero, then return the other, otherwise return the min */ +#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) + +/** + * s3c_cpufreq_freq_min - find the minimum settings for the given freq. + * @dst: The destination structure + * @a: One argument. + * @b: The other argument. + * + * Create a minimum of each frequency entry in the 'struct s3c_freq', + * unless the entry is zero when it is ignored and the non-zero argument + * used. + */ +static void s3c_cpufreq_freq_min(struct s3c_freq *dst, + struct s3c_freq *a, struct s3c_freq *b) +{ + dst->fclk = do_min(a->fclk, b->fclk); + dst->hclk = do_min(a->hclk, b->hclk); + dst->pclk = do_min(a->pclk, b->pclk); + dst->armclk = do_min(a->armclk, b->armclk); +} + +static inline u32 calc_locktime(u32 freq, u32 time_us) +{ + u32 result; + + result = freq * time_us; + result = DIV_ROUND_UP(result, 1000 * 1000); + + return result; +} + +static void s3c_cpufreq_update_loctkime(void) +{ + unsigned int bits = cpu_cur.info->locktime_bits; + u32 rate = (u32)clk_get_rate(_clk_xtal); + u32 val; + + if (bits == 0) { + WARN_ON(1); + return; + } + + val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; + val |= calc_locktime(rate, cpu_cur.info->locktime_m); + + pr_info("%s: new locktime is 0x%08x\n", __func__, val); + s3c24xx_write_locktime(val); +} + +static int s3c_cpufreq_build_freq(void) +{ + int size, ret; + + kfree(ftab); + + size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); + size++; + + ftab = kcalloc(size, sizeof(*ftab), GFP_KERNEL); + if (!ftab) + return -ENOMEM; + + ftab_size = size; + + ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); + s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); + + return 0; +} + +static int __init s3c_cpufreq_initcall(void) +{ + int ret = 0; + + if (cpu_cur.info && cpu_cur.board) { + ret = s3c_cpufreq_initclks(); + if (ret) + goto out; + + /* get current settings */ + s3c_cpufreq_getcur(&cpu_cur); + s3c_cpufreq_show("cur", &cpu_cur); + + if (cpu_cur.board->auto_io) { + ret = s3c_cpufreq_auto_io(); + if (ret) { + pr_err("%s: failed to get io timing\n", + __func__); + goto out; + } + } + + if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { + pr_err("%s: no IO support registered\n", __func__); + ret = -EINVAL; + goto out; + } + + if (!cpu_cur.info->need_pll) + cpu_cur.lock_pll = 1; + + s3c_cpufreq_update_loctkime(); + + s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, + &cpu_cur.info->max); + + if (cpu_cur.info->calc_freqtable) + s3c_cpufreq_build_freq(); + + ret = cpufreq_register_driver(&s3c24xx_driver); + } + + out: + return ret; +} + +late_initcall(s3c_cpufreq_initcall); + +/** + * s3c_plltab_register - register CPU PLL table. + * @plls: The list of PLL entries. + * @plls_no: The size of the PLL entries @plls. + * + * Register the given set of PLLs with the system. + */ +int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no) +{ + struct cpufreq_frequency_table *vals; + unsigned int size; + + size = sizeof(*vals) * (plls_no + 1); + + vals = kzalloc(size, GFP_KERNEL); + if (vals) { + memcpy(vals, plls, size); + pll_reg = vals; + + /* write a terminating entry, we don't store it in the + * table that is stored in the kernel */ + vals += plls_no; + vals->frequency = CPUFREQ_TABLE_END; + + pr_info("%d PLL entries\n", plls_no); + } else + pr_err("no memory for PLL tables\n"); + + return vals ? 0 : -ENOMEM; +} diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c new file mode 100644 index 000000000..c6bdfc308 --- /dev/null +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2009 Wolfson Microelectronics plc + * + * S3C64xx CPUfreq Support + */ + +#define pr_fmt(fmt) "cpufreq: " fmt + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> +#include <linux/module.h> + +static struct regulator *vddarm; +static unsigned long regulator_latency; + +struct s3c64xx_dvfs { + unsigned int vddarm_min; + unsigned int vddarm_max; +}; + +static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { + [0] = { 1000000, 1150000 }, + [1] = { 1050000, 1150000 }, + [2] = { 1100000, 1150000 }, + [3] = { 1200000, 1350000 }, + [4] = { 1300000, 1350000 }, +}; + +static struct cpufreq_frequency_table s3c64xx_freq_table[] = { + { 0, 0, 66000 }, + { 0, 0, 100000 }, + { 0, 0, 133000 }, + { 0, 1, 200000 }, + { 0, 1, 222000 }, + { 0, 1, 266000 }, + { 0, 2, 333000 }, + { 0, 2, 400000 }, + { 0, 2, 532000 }, + { 0, 2, 533000 }, + { 0, 3, 667000 }, + { 0, 4, 800000 }, + { 0, 0, CPUFREQ_TABLE_END }, +}; + +static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct s3c64xx_dvfs *dvfs; + unsigned int old_freq, new_freq; + int ret; + + old_freq = clk_get_rate(policy->clk) / 1000; + new_freq = s3c64xx_freq_table[index].frequency; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data]; + +#ifdef CONFIG_REGULATOR + if (vddarm && new_freq > old_freq) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("Failed to set VDDARM for %dkHz: %d\n", + new_freq, ret); + return ret; + } + } +#endif + + ret = clk_set_rate(policy->clk, new_freq * 1000); + if (ret < 0) { + pr_err("Failed to set rate %dkHz: %d\n", + new_freq, ret); + return ret; + } + +#ifdef CONFIG_REGULATOR + if (vddarm && new_freq < old_freq) { + ret = regulator_set_voltage(vddarm, + dvfs->vddarm_min, + dvfs->vddarm_max); + if (ret != 0) { + pr_err("Failed to set VDDARM for %dkHz: %d\n", + new_freq, ret); + if (clk_set_rate(policy->clk, old_freq * 1000) < 0) + pr_err("Failed to restore original clock rate\n"); + + return ret; + } + } +#endif + + pr_debug("Set actual frequency %lukHz\n", + clk_get_rate(policy->clk) / 1000); + + return 0; +} + +#ifdef CONFIG_REGULATOR +static void s3c64xx_cpufreq_config_regulator(void) +{ + int count, v, i, found; + struct cpufreq_frequency_table *freq; + struct s3c64xx_dvfs *dvfs; + + count = regulator_count_voltages(vddarm); + if (count < 0) { + pr_err("Unable to check supported voltages\n"); + } + + if (!count) + goto out; + + cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) { + dvfs = &s3c64xx_dvfs_table[freq->driver_data]; + found = 0; + + for (i = 0; i < count; i++) { + v = regulator_list_voltage(vddarm, i); + if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max) + found = 1; + } + + if (!found) { + pr_debug("%dkHz unsupported by regulator\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + } + +out: + /* Guess based on having to do an I2C/SPI write; in future we + * will be able to query the regulator performance here. */ + regulator_latency = 1 * 1000 * 1000; +} +#endif + +static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq; + + if (policy->cpu != 0) + return -EINVAL; + + policy->clk = clk_get(NULL, "armclk"); + if (IS_ERR(policy->clk)) { + pr_err("Unable to obtain ARMCLK: %ld\n", + PTR_ERR(policy->clk)); + return PTR_ERR(policy->clk); + } + +#ifdef CONFIG_REGULATOR + vddarm = regulator_get(NULL, "vddarm"); + if (IS_ERR(vddarm)) { + pr_err("Failed to obtain VDDARM: %ld\n", PTR_ERR(vddarm)); + pr_err("Only frequency scaling available\n"); + vddarm = NULL; + } else { + s3c64xx_cpufreq_config_regulator(); + } +#endif + + cpufreq_for_each_entry(freq, s3c64xx_freq_table) { + unsigned long r; + + /* Check for frequencies we can generate */ + r = clk_round_rate(policy->clk, freq->frequency * 1000); + r /= 1000; + if (r != freq->frequency) { + pr_debug("%dkHz unsupported by clock\n", + freq->frequency); + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + /* If we have no regulator then assume startup + * frequency is the maximum we can support. */ + if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000) + freq->frequency = CPUFREQ_ENTRY_INVALID; + } + + /* Datasheet says PLL stabalisation time (if we were to use + * the PLLs, which we don't currently) is ~300us worst case, + * but add some fudge. + */ + cpufreq_generic_init(policy, s3c64xx_freq_table, + (500 * 1000) + regulator_latency); + return 0; +} + +static struct cpufreq_driver s3c64xx_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s3c64xx_cpufreq_set_target, + .get = cpufreq_generic_get, + .init = s3c64xx_cpufreq_driver_init, + .name = "s3c", +}; + +static int __init s3c64xx_cpufreq_init(void) +{ + return cpufreq_register_driver(&s3c64xx_cpufreq_driver); +} +module_init(s3c64xx_cpufreq_init); diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c new file mode 100644 index 000000000..76c888ed8 --- /dev/null +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -0,0 +1,687 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * CPU frequency scaling for S5PC110/S5PV210 +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regulator/consumer.h> + +static void __iomem *clk_base; +static void __iomem *dmc_base[2]; + +#define S5P_CLKREG(x) (clk_base + (x)) + +#define S5P_APLL_LOCK S5P_CLKREG(0x00) +#define S5P_APLL_CON S5P_CLKREG(0x100) +#define S5P_CLK_SRC0 S5P_CLKREG(0x200) +#define S5P_CLK_SRC2 S5P_CLKREG(0x208) +#define S5P_CLK_DIV0 S5P_CLKREG(0x300) +#define S5P_CLK_DIV2 S5P_CLKREG(0x308) +#define S5P_CLK_DIV6 S5P_CLKREG(0x318) +#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000) +#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004) +#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100) +#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104) + +#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100) + +/* CLKSRC0 */ +#define S5P_CLKSRC0_MUX200_SHIFT (16) +#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT) +#define S5P_CLKSRC0_MUX166_MASK (0x1<<20) +#define S5P_CLKSRC0_MUX133_MASK (0x1<<24) + +/* CLKSRC2 */ +#define S5P_CLKSRC2_G3D_SHIFT (0) +#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT) +#define S5P_CLKSRC2_MFC_SHIFT (4) +#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT) + +/* CLKDIV0 */ +#define S5P_CLKDIV0_APLL_SHIFT (0) +#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) +#define S5P_CLKDIV0_A2M_SHIFT (4) +#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) +#define S5P_CLKDIV0_HCLK200_SHIFT (8) +#define S5P_CLKDIV0_HCLK200_MASK (0x7 << S5P_CLKDIV0_HCLK200_SHIFT) +#define S5P_CLKDIV0_PCLK100_SHIFT (12) +#define S5P_CLKDIV0_PCLK100_MASK (0x7 << S5P_CLKDIV0_PCLK100_SHIFT) +#define S5P_CLKDIV0_HCLK166_SHIFT (16) +#define S5P_CLKDIV0_HCLK166_MASK (0xF << S5P_CLKDIV0_HCLK166_SHIFT) +#define S5P_CLKDIV0_PCLK83_SHIFT (20) +#define S5P_CLKDIV0_PCLK83_MASK (0x7 << S5P_CLKDIV0_PCLK83_SHIFT) +#define S5P_CLKDIV0_HCLK133_SHIFT (24) +#define S5P_CLKDIV0_HCLK133_MASK (0xF << S5P_CLKDIV0_HCLK133_SHIFT) +#define S5P_CLKDIV0_PCLK66_SHIFT (28) +#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) + +/* CLKDIV2 */ +#define S5P_CLKDIV2_G3D_SHIFT (0) +#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT) +#define S5P_CLKDIV2_MFC_SHIFT (4) +#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT) + +/* CLKDIV6 */ +#define S5P_CLKDIV6_ONEDRAM_SHIFT (28) +#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT) + +static struct clk *dmc0_clk; +static struct clk *dmc1_clk; +static DEFINE_MUTEX(set_freq_lock); + +/* APLL M,P,S values for 1G/800Mhz */ +#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) +#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) + +/* Use 800MHz when entering sleep mode */ +#define SLEEP_FREQ (800 * 1000) + +/* Tracks if CPU frequency can be updated anymore */ +static bool no_cpufreq_access; + +/* + * DRAM configurations to calculate refresh counter for changing + * frequency of memory. + */ +struct dram_conf { + unsigned long freq; /* HZ */ + unsigned long refresh; /* DRAM refresh counter * 1000 */ +}; + +/* DRAM configuration (DMC0 and DMC1) */ +static struct dram_conf s5pv210_dram_conf[2]; + +enum perf_level { + L0, L1, L2, L3, L4, +}; + +enum s5pv210_mem_type { + LPDDR = 0x1, + LPDDR2 = 0x2, + DDR2 = 0x4, +}; + +enum s5pv210_dmc_port { + DMC0 = 0, + DMC1, +}; + +static struct cpufreq_frequency_table s5pv210_freq_table[] = { + {0, L0, 1000*1000}, + {0, L1, 800*1000}, + {0, L2, 400*1000}, + {0, L3, 200*1000}, + {0, L4, 100*1000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static struct regulator *arm_regulator; +static struct regulator *int_regulator; + +struct s5pv210_dvs_conf { + int arm_volt; /* uV */ + int int_volt; /* uV */ +}; + +static const int arm_volt_max = 1350000; +static const int int_volt_max = 1250000; + +static struct s5pv210_dvs_conf dvs_conf[] = { + [L0] = { + .arm_volt = 1250000, + .int_volt = 1100000, + }, + [L1] = { + .arm_volt = 1200000, + .int_volt = 1100000, + }, + [L2] = { + .arm_volt = 1050000, + .int_volt = 1100000, + }, + [L3] = { + .arm_volt = 950000, + .int_volt = 1100000, + }, + [L4] = { + .arm_volt = 950000, + .int_volt = 1000000, + }, +}; + +static u32 clkdiv_val[5][11] = { + /* + * Clock divider value for following + * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, + * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, + * ONEDRAM, MFC, G3D } + */ + + /* L0 : [1000/200/100][166/83][133/66][200/200] */ + {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L1 : [800/200/100][166/83][133/66][200/200] */ + {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L2 : [400/200/100][166/83][133/66][200/200] */ + {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L3 : [200/200/100][166/83][133/66][200/200] */ + {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L4 : [100/100/100][83/83][66/66][100/100] */ + {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, +}; + +/* + * This function set DRAM refresh counter + * according to operating frequency of DRAM + * ch: DMC port number 0 or 1 + * freq: Operating frequency of DRAM(KHz) + */ +static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) +{ + unsigned long tmp, tmp1; + void __iomem *reg = NULL; + + if (ch == DMC0) { + reg = (dmc_base[0] + 0x30); + } else if (ch == DMC1) { + reg = (dmc_base[1] + 0x30); + } else { + pr_err("Cannot find DMC port\n"); + return; + } + + /* Find current DRAM frequency */ + tmp = s5pv210_dram_conf[ch].freq; + + tmp /= freq; + + tmp1 = s5pv210_dram_conf[ch].refresh; + + tmp1 /= tmp; + + writel_relaxed(tmp1, reg); +} + +static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned long reg; + unsigned int priv_index; + unsigned int pll_changing = 0; + unsigned int bus_speed_changing = 0; + unsigned int old_freq, new_freq; + int arm_volt, int_volt; + int ret = 0; + + mutex_lock(&set_freq_lock); + + if (no_cpufreq_access) { + pr_err("Denied access to %s as it is disabled temporarily\n", + __func__); + ret = -EINVAL; + goto exit; + } + + old_freq = policy->cur; + new_freq = s5pv210_freq_table[index].frequency; + + /* Finding current running level index */ + priv_index = cpufreq_table_find_index_h(policy, old_freq, false); + + arm_volt = dvs_conf[index].arm_volt; + int_volt = dvs_conf[index].int_volt; + + if (new_freq > old_freq) { + ret = regulator_set_voltage(arm_regulator, + arm_volt, arm_volt_max); + if (ret) + goto exit; + + ret = regulator_set_voltage(int_regulator, + int_volt, int_volt_max); + if (ret) + goto exit; + } + + /* Check if there need to change PLL */ + if ((index == L0) || (priv_index == L0)) + pll_changing = 1; + + /* Check if there need to change System bus clock */ + if ((index == L4) || (priv_index == L4)) + bus_speed_changing = 1; + + if (bus_speed_changing) { + /* + * Reconfigure DRAM refresh counter value for minimum + * temporary clock while changing divider. + * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 + */ + if (pll_changing) + s5pv210_set_refresh(DMC1, 83000); + else + s5pv210_set_refresh(DMC1, 100000); + + s5pv210_set_refresh(DMC0, 83000); + } + + /* + * APLL should be changed in this level + * APLL -> MPLL(for stable transition) -> APLL + * Some clock source's clock API are not prepared. + * Do not use clock API in below code. + */ + if (pll_changing) { + /* + * 1. Temporary Change divider for MFC and G3D + * SCLKA2M(200/1=200)->(200/4=50)Mhz + */ + reg = readl_relaxed(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | + (3 << S5P_CLKDIV2_MFC_SHIFT); + writel_relaxed(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = readl_relaxed(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* + * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX + * (200/4=50)->(667/4=166)Mhz + */ + reg = readl_relaxed(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | + (1 << S5P_CLKSRC2_MFC_SHIFT); + writel_relaxed(reg, S5P_CLK_SRC2); + + do { + reg = readl_relaxed(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 3. DMC1 refresh count for 133Mhz if (index == L4) is + * true refresh counter is already programmed in upper + * code. 0x287@83Mhz + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 133000); + + /* 4. SCLKAPLL -> SCLKMPLL */ + reg = readl_relaxed(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); + writel_relaxed(reg, S5P_CLK_SRC0); + + do { + reg = readl_relaxed(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + } + + /* Change divider */ + reg = readl_relaxed(S5P_CLK_DIV0); + + reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | + S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | + S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | + S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); + + reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | + (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | + (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | + (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | + (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | + (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | + (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | + (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); + + writel_relaxed(reg, S5P_CLK_DIV0); + + do { + reg = readl_relaxed(S5P_CLKDIV_STAT0); + } while (reg & 0xff); + + /* ARM MCS value changed */ + reg = readl_relaxed(S5P_ARM_MCS_CON); + reg &= ~0x3; + if (index >= L3) + reg |= 0x3; + else + reg |= 0x1; + + writel_relaxed(reg, S5P_ARM_MCS_CON); + + if (pll_changing) { + /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ + writel_relaxed(0x2cf, S5P_APLL_LOCK); + + /* + * 6. Turn on APLL + * 6-1. Set PMS values + * 6-2. Wait until the PLL is locked + */ + if (index == L0) + writel_relaxed(APLL_VAL_1000, S5P_APLL_CON); + else + writel_relaxed(APLL_VAL_800, S5P_APLL_CON); + + do { + reg = readl_relaxed(S5P_APLL_CON); + } while (!(reg & (0x1 << 29))); + + /* + * 7. Change source clock from SCLKMPLL(667Mhz) + * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX + * (667/4=166)->(200/4=50)Mhz + */ + reg = readl_relaxed(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | + (0 << S5P_CLKSRC2_MFC_SHIFT); + writel_relaxed(reg, S5P_CLK_SRC2); + + do { + reg = readl_relaxed(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 8. Change divider for MFC and G3D + * (200/4=50)->(200/1=200)Mhz + */ + reg = readl_relaxed(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | + (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); + writel_relaxed(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = readl_relaxed(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* 9. Change MPLL to APLL in MSYS_MUX */ + reg = readl_relaxed(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); + writel_relaxed(reg, S5P_CLK_SRC0); + + do { + reg = readl_relaxed(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + /* + * 10. DMC1 refresh counter + * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c + * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 200000); + } + + /* + * L4 level needs to change memory bus speed, hence ONEDRAM clock + * divider and memory refresh parameter should be changed + */ + if (bus_speed_changing) { + reg = readl_relaxed(S5P_CLK_DIV6); + reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; + reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); + writel_relaxed(reg, S5P_CLK_DIV6); + + do { + reg = readl_relaxed(S5P_CLKDIV_STAT1); + } while (reg & (1 << 15)); + + /* Reconfigure DRAM refresh counter value */ + if (index != L4) { + /* + * DMC0 : 166Mhz + * DMC1 : 200Mhz + */ + s5pv210_set_refresh(DMC0, 166000); + s5pv210_set_refresh(DMC1, 200000); + } else { + /* + * DMC0 : 83Mhz + * DMC1 : 100Mhz + */ + s5pv210_set_refresh(DMC0, 83000); + s5pv210_set_refresh(DMC1, 100000); + } + } + + if (new_freq < old_freq) { + regulator_set_voltage(int_regulator, + int_volt, int_volt_max); + + regulator_set_voltage(arm_regulator, + arm_volt, arm_volt_max); + } + + pr_debug("Perf changed[L%d]\n", index); + +exit: + mutex_unlock(&set_freq_lock); + return ret; +} + +static int check_mem_type(void __iomem *dmc_reg) +{ + unsigned long val; + + val = readl_relaxed(dmc_reg + 0x4); + val = (val & (0xf << 8)); + + return val >> 8; +} + +static int s5pv210_cpu_init(struct cpufreq_policy *policy) +{ + unsigned long mem_type; + int ret; + + policy->clk = clk_get(NULL, "armclk"); + if (IS_ERR(policy->clk)) + return PTR_ERR(policy->clk); + + dmc0_clk = clk_get(NULL, "sclk_dmc0"); + if (IS_ERR(dmc0_clk)) { + ret = PTR_ERR(dmc0_clk); + goto out_dmc0; + } + + dmc1_clk = clk_get(NULL, "hclk_msys"); + if (IS_ERR(dmc1_clk)) { + ret = PTR_ERR(dmc1_clk); + goto out_dmc1; + } + + if (policy->cpu != 0) { + ret = -EINVAL; + goto out_dmc1; + } + + /* + * check_mem_type : This driver only support LPDDR & LPDDR2. + * other memory type is not supported. + */ + mem_type = check_mem_type(dmc_base[0]); + + if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { + pr_err("CPUFreq doesn't support this memory type\n"); + ret = -EINVAL; + goto out_dmc1; + } + + /* Find current refresh counter and frequency each DMC */ + s5pv210_dram_conf[0].refresh = (readl_relaxed(dmc_base[0] + 0x30) * 1000); + s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); + + s5pv210_dram_conf[1].refresh = (readl_relaxed(dmc_base[1] + 0x30) * 1000); + s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); + + policy->suspend_freq = SLEEP_FREQ; + cpufreq_generic_init(policy, s5pv210_freq_table, 40000); + return 0; + +out_dmc1: + clk_put(dmc0_clk); +out_dmc0: + clk_put(policy->clk); + return ret; +} + +static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + int ret; + struct cpufreq_policy *policy; + + policy = cpufreq_cpu_get(0); + if (!policy) { + pr_debug("cpufreq: get no policy for cpu0\n"); + return NOTIFY_BAD; + } + + ret = cpufreq_driver_target(policy, SLEEP_FREQ, 0); + cpufreq_cpu_put(policy); + + if (ret < 0) + return NOTIFY_BAD; + + no_cpufreq_access = true; + return NOTIFY_DONE; +} + +static struct cpufreq_driver s5pv210_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s5pv210_target, + .get = cpufreq_generic_get, + .init = s5pv210_cpu_init, + .name = "s5pv210", + .suspend = cpufreq_generic_suspend, + .resume = cpufreq_generic_suspend, /* We need to set SLEEP FREQ again */ +}; + +static struct notifier_block s5pv210_cpufreq_reboot_notifier = { + .notifier_call = s5pv210_cpufreq_reboot_notifier_event, +}; + +static int s5pv210_cpufreq_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np; + int id, result = 0; + + /* + * HACK: This is a temporary workaround to get access to clock + * and DMC controller registers directly and remove static mappings + * and dependencies on platform headers. It is necessary to enable + * S5PV210 multi-platform support and will be removed together with + * this whole driver as soon as S5PV210 gets migrated to use + * cpufreq-dt driver. + */ + arm_regulator = regulator_get(NULL, "vddarm"); + if (IS_ERR(arm_regulator)) + return dev_err_probe(dev, PTR_ERR(arm_regulator), + "failed to get regulator vddarm\n"); + + int_regulator = regulator_get(NULL, "vddint"); + if (IS_ERR(int_regulator)) { + result = dev_err_probe(dev, PTR_ERR(int_regulator), + "failed to get regulator vddint\n"); + goto err_int_regulator; + } + + np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock"); + if (!np) { + dev_err(dev, "failed to find clock controller DT node\n"); + result = -ENODEV; + goto err_clock; + } + + clk_base = of_iomap(np, 0); + of_node_put(np); + if (!clk_base) { + dev_err(dev, "failed to map clock registers\n"); + result = -EFAULT; + goto err_clock; + } + + for_each_compatible_node(np, NULL, "samsung,s5pv210-dmc") { + id = of_alias_get_id(np, "dmc"); + if (id < 0 || id >= ARRAY_SIZE(dmc_base)) { + dev_err(dev, "failed to get alias of dmc node '%pOFn'\n", np); + of_node_put(np); + result = id; + goto err_clk_base; + } + + dmc_base[id] = of_iomap(np, 0); + if (!dmc_base[id]) { + dev_err(dev, "failed to map dmc%d registers\n", id); + of_node_put(np); + result = -EFAULT; + goto err_dmc; + } + } + + for (id = 0; id < ARRAY_SIZE(dmc_base); ++id) { + if (!dmc_base[id]) { + dev_err(dev, "failed to find dmc%d node\n", id); + result = -ENODEV; + goto err_dmc; + } + } + + register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier); + + return cpufreq_register_driver(&s5pv210_driver); + +err_dmc: + for (id = 0; id < ARRAY_SIZE(dmc_base); ++id) + if (dmc_base[id]) { + iounmap(dmc_base[id]); + dmc_base[id] = NULL; + } + +err_clk_base: + iounmap(clk_base); + +err_clock: + regulator_put(int_regulator); + +err_int_regulator: + regulator_put(arm_regulator); + + return result; +} + +static struct platform_driver s5pv210_cpufreq_platdrv = { + .driver = { + .name = "s5pv210-cpufreq", + }, + .probe = s5pv210_cpufreq_probe, +}; +builtin_platform_driver(s5pv210_cpufreq_platdrv); diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c new file mode 100644 index 000000000..252b9fc26 --- /dev/null +++ b/drivers/cpufreq/sa1100-cpufreq.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * cpu-sa1100.c: clock scaling for the SA1100 + * + * Copyright (C) 2000 2001, The Delft University of Technology + * + * Authors: + * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version + * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): + * - major rewrite for linux-2.3.99 + * - rewritten for the more generic power management scheme in + * linux-2.4.5-rmk1 + * + * This software has been developed while working on the LART + * computing board (http://www.lartmaker.nl/), which is + * sponsored by the Mobile Multi-media Communications + * (http://www.mobimedia.org/) and Ubiquitous Communications + * (http://www.ubicom.tudelft.nl/) projects. + * + * The authors can be reached at: + * + * Erik Mouw + * Information and Communication Theory Group + * Faculty of Information Technology and Systems + * Delft University of Technology + * P.O. Box 5031 + * 2600 GA Delft + * The Netherlands + * + * Theory of operations + * ==================== + * + * Clock scaling can be used to lower the power consumption of the CPU + * core. This will give you a somewhat longer running time. + * + * The SA-1100 has a single register to change the core clock speed: + * + * PPCR 0x90020014 PLL config + * + * However, the DRAM timings are closely related to the core clock + * speed, so we need to change these, too. The used registers are: + * + * MDCNFG 0xA0000000 DRAM config + * MDCAS0 0xA0000004 Access waveform + * MDCAS1 0xA0000008 Access waveform + * MDCAS2 0xA000000C Access waveform + * + * Care must be taken to change the DRAM parameters the correct way, + * because otherwise the DRAM becomes unusable and the kernel will + * crash. + * + * The simple solution to avoid a kernel crash is to put the actual + * clock change in ROM and jump to that code from the kernel. The main + * disadvantage is that the ROM has to be modified, which is not + * possible on all SA-1100 platforms. Another disadvantage is that + * jumping to ROM makes clock switching unnecessary complicated. + * + * The idea behind this driver is that the memory configuration can be + * changed while running from DRAM (even with interrupts turned on!) + * as long as all re-configuration steps yield a valid DRAM + * configuration. The advantages are clear: it will run on all SA-1100 + * platforms, and the code is very simple. + * + * If you really want to understand what is going on in + * sa1100_update_dram_timings(), you'll have to read sections 8.2, + * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor + * Developers Manual" (available for free from Intel). + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/io.h> + +#include <asm/cputype.h> + +#include <mach/generic.h> +#include <mach/hardware.h> + +struct sa1100_dram_regs { + int speed; + u32 mdcnfg; + u32 mdcas0; + u32 mdcas1; + u32 mdcas2; +}; + + +static struct cpufreq_driver sa1100_driver; + +static struct sa1100_dram_regs sa1100_dram_settings[] = { + /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ + { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ + { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ + { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ + {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ + {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ + {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ + {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ + {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ + {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ + {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ + {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ + {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ + {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ + {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ + {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ + {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ + { 0, 0, 0, 0, 0 } /* last entry */ +}; + +static void sa1100_update_dram_timings(int current_speed, int new_speed) +{ + struct sa1100_dram_regs *settings = sa1100_dram_settings; + + /* find speed */ + while (settings->speed != 0) { + if (new_speed == settings->speed) + break; + + settings++; + } + + if (settings->speed == 0) { + panic("%s: couldn't find dram setting for speed %d\n", + __func__, new_speed); + } + + /* No risk, no fun: run with interrupts on! */ + if (new_speed > current_speed) { + /* We're going FASTER, so first relax the memory + * timings before changing the core frequency + */ + + /* Half the memory access clock */ + MDCNFG |= MDCNFG_CDB2; + + /* The order of these statements IS important, keep 8 + * pulses!! + */ + MDCAS2 = settings->mdcas2; + MDCAS1 = settings->mdcas1; + MDCAS0 = settings->mdcas0; + MDCNFG = settings->mdcnfg; + } else { + /* We're going SLOWER: first decrease the core + * frequency and then tighten the memory settings. + */ + + /* Half the memory access clock */ + MDCNFG |= MDCNFG_CDB2; + + /* The order of these statements IS important, keep 8 + * pulses!! + */ + MDCAS0 = settings->mdcas0; + MDCAS1 = settings->mdcas1; + MDCAS2 = settings->mdcas2; + MDCNFG = settings->mdcnfg; + } +} + +static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr) +{ + unsigned int cur = sa11x0_getspeed(0); + unsigned int new_freq; + + new_freq = sa11x0_freq_table[ppcr].frequency; + + if (new_freq > cur) + sa1100_update_dram_timings(cur, new_freq); + + PPCR = ppcr; + + if (new_freq < cur) + sa1100_update_dram_timings(cur, new_freq); + + return 0; +} + +static int __init sa1100_cpu_init(struct cpufreq_policy *policy) +{ + cpufreq_generic_init(policy, sa11x0_freq_table, 0); + return 0; +} + +static struct cpufreq_driver sa1100_driver __refdata = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sa1100_target, + .get = sa11x0_getspeed, + .init = sa1100_cpu_init, + .name = "sa1100", +}; + +static int __init sa1100_dram_init(void) +{ + if (cpu_is_sa1100()) + return cpufreq_register_driver(&sa1100_driver); + else + return -ENODEV; +} + +arch_initcall(sa1100_dram_init); diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c new file mode 100644 index 000000000..1a83c8678 --- /dev/null +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/arch/arm/mach-sa1100/cpu-sa1110.c + * + * Copyright (C) 2001 Russell King + * + * Note: there are two erratas that apply to the SA1110 here: + * 7 - SDRAM auto-power-up failure (rev A0) + * 13 - Corruption of internal register reads/writes following + * SDRAM reads (rev A0, B0, B1) + * + * We ignore rev. A0 and B0 devices; I don't think they're worth supporting. + * + * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type + */ +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include <linux/types.h> + +#include <asm/cputype.h> +#include <asm/mach-types.h> + +#include <mach/generic.h> +#include <mach/hardware.h> + +#undef DEBUG + +struct sdram_params { + const char name[20]; + u_char rows; /* bits */ + u_char cas_latency; /* cycles */ + u_char tck; /* clock cycle time (ns) */ + u_char trcd; /* activate to r/w (ns) */ + u_char trp; /* precharge to activate (ns) */ + u_char twr; /* write recovery time (ns) */ + u_short refresh; /* refresh time for array (us) */ +}; + +struct sdram_info { + u_int mdcnfg; + u_int mdrefr; + u_int mdcas[3]; +}; + +static struct sdram_params sdram_tbl[] __initdata = { + { /* Toshiba TC59SM716 CL2 */ + .name = "TC59SM716-CL2", + .rows = 12, + .tck = 10, + .trcd = 20, + .trp = 20, + .twr = 10, + .refresh = 64000, + .cas_latency = 2, + }, { /* Toshiba TC59SM716 CL3 */ + .name = "TC59SM716-CL3", + .rows = 12, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung K4S641632D TC75 */ + .name = "K4S641632D", + .rows = 14, + .tck = 9, + .trcd = 27, + .trp = 20, + .twr = 9, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung K4S281632B-1H */ + .name = "K4S281632B-1H", + .rows = 12, + .tck = 10, + .trp = 20, + .twr = 10, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung KM416S4030CT */ + .name = "KM416S4030CT", + .rows = 13, + .tck = 8, + .trcd = 24, /* 3 CLKs */ + .trp = 24, /* 3 CLKs */ + .twr = 16, /* Trdl: 2 CLKs */ + .refresh = 64000, + .cas_latency = 3, + }, { /* Winbond W982516AH75L CL3 */ + .name = "W982516AH75L", + .rows = 16, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, { /* Micron MT48LC8M16A2TG-75 */ + .name = "MT48LC8M16A2TG-75", + .rows = 12, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, +}; + +static struct sdram_params sdram_params; + +/* + * Given a period in ns and frequency in khz, calculate the number of + * cycles of frequency in period. Note that we round up to the next + * cycle, even if we are only slightly over. + */ +static inline u_int ns_to_cycles(u_int ns, u_int khz) +{ + return (ns * khz + 999999) / 1000000; +} + +/* + * Create the MDCAS register bit pattern. + */ +static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd) +{ + u_int shift; + + rcd = 2 * rcd - 1; + shift = delayed + 1 + rcd; + + mdcas[0] = (1 << rcd) - 1; + mdcas[0] |= 0x55555555 << shift; + mdcas[1] = mdcas[2] = 0x55555555 << (shift & 1); +} + +static void +sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz, + struct sdram_params *sdram) +{ + u_int mem_khz, sd_khz, trp, twr; + + mem_khz = cpu_khz / 2; + sd_khz = mem_khz; + + /* + * If SDCLK would invalidate the SDRAM timings, + * run SDCLK at half speed. + * + * CPU steppings prior to B2 must either run the memory at + * half speed or use delayed read latching (errata 13). + */ + if ((ns_to_cycles(sdram->tck, sd_khz) > 1) || + (read_cpuid_revision() < ARM_CPU_REV_SA1110_B2 && sd_khz < 62000)) + sd_khz /= 2; + + sd->mdcnfg = MDCNFG & 0x007f007f; + + twr = ns_to_cycles(sdram->twr, mem_khz); + + /* trp should always be >1 */ + trp = ns_to_cycles(sdram->trp, mem_khz) - 1; + if (trp < 1) + trp = 1; + + sd->mdcnfg |= trp << 8; + sd->mdcnfg |= trp << 24; + sd->mdcnfg |= sdram->cas_latency << 12; + sd->mdcnfg |= sdram->cas_latency << 28; + sd->mdcnfg |= twr << 14; + sd->mdcnfg |= twr << 30; + + sd->mdrefr = MDREFR & 0xffbffff0; + sd->mdrefr |= 7; + + if (sd_khz != mem_khz) + sd->mdrefr |= MDREFR_K1DB2; + + /* initial number of '1's in MDCAS + 1 */ + set_mdcas(sd->mdcas, sd_khz >= 62000, + ns_to_cycles(sdram->trcd, mem_khz)); + +#ifdef DEBUG + printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", + sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], + sd->mdcas[2]); +#endif +} + +/* + * Set the SDRAM refresh rate. + */ +static inline void sdram_set_refresh(u_int dri) +{ + MDREFR = (MDREFR & 0xffff000f) | (dri << 4); + (void) MDREFR; +} + +/* + * Update the refresh period. We do this such that we always refresh + * the SDRAMs within their permissible period. The refresh period is + * always a multiple of the memory clock (fixed at cpu_clock / 2). + * + * FIXME: we don't currently take account of burst accesses here, + * but neither do Intels DM nor Angel. + */ +static void +sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) +{ + u_int ns_row = (sdram->refresh * 1000) >> sdram->rows; + u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32; + +#ifdef DEBUG + mdelay(250); + printk(KERN_DEBUG "new dri value = %d\n", dri); +#endif + + sdram_set_refresh(dri); +} + +/* + * Ok, set the CPU frequency. + */ +static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr) +{ + struct sdram_params *sdram = &sdram_params; + struct sdram_info sd; + unsigned long flags; + unsigned int unused; + + sdram_calculate_timing(&sd, sa11x0_freq_table[ppcr].frequency, sdram); + +#if 0 + /* + * These values are wrong according to the SA1110 documentation + * and errata, but they seem to work. Need to get a storage + * scope on to the SDRAM signals to work out why. + */ + if (policy->max < 147500) { + sd.mdrefr |= MDREFR_K1DB2; + sd.mdcas[0] = 0xaaaaaa7f; + } else { + sd.mdrefr &= ~MDREFR_K1DB2; + sd.mdcas[0] = 0xaaaaaa9f; + } + sd.mdcas[1] = 0xaaaaaaaa; + sd.mdcas[2] = 0xaaaaaaaa; +#endif + + /* + * The clock could be going away for some time. Set the SDRAMs + * to refresh rapidly (every 64 memory clock cycles). To get + * through the whole array, we need to wait 262144 mclk cycles. + * We wait 20ms to be safe. + */ + sdram_set_refresh(2); + if (!irqs_disabled()) + msleep(20); + else + mdelay(20); + + /* + * Reprogram the DRAM timings with interrupts disabled, and + * ensure that we are doing this within a complete cache line. + * This means that we won't access SDRAM for the duration of + * the programming. + */ + local_irq_save(flags); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); + udelay(10); + __asm__ __volatile__("\n\ + b 2f \n\ + .align 5 \n\ +1: str %3, [%1, #0] @ MDCNFG \n\ + str %4, [%1, #28] @ MDREFR \n\ + str %5, [%1, #4] @ MDCAS0 \n\ + str %6, [%1, #8] @ MDCAS1 \n\ + str %7, [%1, #12] @ MDCAS2 \n\ + str %8, [%2, #0] @ PPCR \n\ + ldr %0, [%1, #0] \n\ + b 3f \n\ +2: b 1b \n\ +3: nop \n\ + nop" + : "=&r" (unused) + : "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg), + "r" (sd.mdrefr), "r" (sd.mdcas[0]), + "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr)); + local_irq_restore(flags); + + /* + * Now, return the SDRAM refresh back to normal. + */ + sdram_update_refresh(sa11x0_freq_table[ppcr].frequency, sdram); + + return 0; +} + +static int __init sa1110_cpu_init(struct cpufreq_policy *policy) +{ + cpufreq_generic_init(policy, sa11x0_freq_table, 0); + return 0; +} + +/* sa1110_driver needs __refdata because it must remain after init registers + * it with cpufreq_register_driver() */ +static struct cpufreq_driver sa1110_driver __refdata = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sa1110_target, + .get = sa11x0_getspeed, + .init = sa1110_cpu_init, + .name = "sa1110", +}; + +static struct sdram_params *sa1110_find_sdram(const char *name) +{ + struct sdram_params *sdram; + + for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); + sdram++) + if (strcmp(name, sdram->name) == 0) + return sdram; + + return NULL; +} + +static char sdram_name[16]; + +static int __init sa1110_clk_init(void) +{ + struct sdram_params *sdram; + const char *name = sdram_name; + + if (!cpu_is_sa1110()) + return -ENODEV; + + if (!name[0]) { + if (machine_is_assabet()) + name = "TC59SM716-CL3"; + if (machine_is_pt_system3()) + name = "K4S641632D"; + if (machine_is_h3100()) + name = "KM416S4030CT"; + if (machine_is_jornada720() || machine_is_h3600()) + name = "K4S281632B-1H"; + if (machine_is_nanoengine()) + name = "MT48LC8M16A2TG-75"; + } + + sdram = sa1110_find_sdram(name); + if (sdram) { + printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d" + " twr: %d refresh: %d cas_latency: %d\n", + sdram->tck, sdram->trcd, sdram->trp, + sdram->twr, sdram->refresh, sdram->cas_latency); + + memcpy(&sdram_params, sdram, sizeof(sdram_params)); + + return cpufreq_register_driver(&sa1110_driver); + } + + return 0; +} + +module_param_string(sdram, sdram_name, sizeof(sdram_name), 0); +arch_initcall(sa1110_clk_init); diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c new file mode 100644 index 000000000..330c8d6cf --- /dev/null +++ b/drivers/cpufreq/sc520_freq.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * sc520_freq.c: cpufreq driver for the AMD Elan sc520 + * + * Copyright (C) 2005 Sean Young <sean@mess.org> + * + * Based on elanfreq.c + * + * 2005-03-30: - initial revision + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> +#include <linux/timex.h> +#include <linux/io.h> + +#include <asm/cpu_device_id.h> +#include <asm/msr.h> + +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_CPUCTL 0x2 /* CPU Control Register */ + +static __u8 __iomem *cpuctl; + +static struct cpufreq_frequency_table sc520_freq_table[] = { + {0, 0x01, 100000}, + {0, 0x02, 133000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg = *cpuctl; + + switch (clockspeed_reg & 0x03) { + default: + pr_err("error: cpuctl register has unexpected value %02x\n", + clockspeed_reg); + fallthrough; + case 0x01: + return 100000; + case 0x02: + return 133000; + } +} + +static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state) +{ + + u8 clockspeed_reg; + + local_irq_disable(); + + clockspeed_reg = *cpuctl & ~0x03; + *cpuctl = clockspeed_reg | sc520_freq_table[state].driver_data; + + local_irq_enable(); + + return 0; +} + +/* + * Module init and exit code + */ + +static int sc520_freq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + + /* capability check */ + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) + return -ENODEV; + + /* cpuinfo and default policy values */ + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->freq_table = sc520_freq_table; + + return 0; +} + + +static struct cpufreq_driver sc520_freq_driver = { + .get = sc520_freq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sc520_freq_target, + .init = sc520_freq_cpu_init, + .name = "sc520_freq", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id sc520_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(AMD, 4, 9, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, sc520_ids); + +static int __init sc520_freq_init(void) +{ + int err; + + if (!x86_match_cpu(sc520_ids)) + return -ENODEV; + + cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); + if (!cpuctl) { + pr_err("sc520_freq: error: failed to remap memory\n"); + return -ENOMEM; + } + + err = cpufreq_register_driver(&sc520_freq_driver); + if (err) + iounmap(cpuctl); + + return err; +} + + +static void __exit sc520_freq_exit(void) +{ + cpufreq_unregister_driver(&sc520_freq_driver); + iounmap(cpuctl); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young <sean@mess.org>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); + +module_init(sc520_freq_init); +module_exit(sc520_freq_exit); + diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c new file mode 100644 index 000000000..028df8a5f --- /dev/null +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * System Control and Power Interface (SCMI) based CPUFreq Interface driver + * + * Copyright (C) 2018-2021 ARM Ltd. + * Sudeep Holla <sudeep.holla@arm.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk-provider.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/energy_model.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/scmi_protocol.h> +#include <linux/types.h> +#include <linux/units.h> + +struct scmi_data { + int domain_id; + int nr_opp; + struct device *cpu_dev; + cpumask_var_t opp_shared_cpus; +}; + +static struct scmi_protocol_handle *ph; +static const struct scmi_perf_proto_ops *perf_ops; + +static unsigned int scmi_cpufreq_get_rate(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); + struct scmi_data *priv = policy->driver_data; + unsigned long rate; + int ret; + + ret = perf_ops->freq_get(ph, priv->domain_id, &rate, false); + if (ret) + return 0; + return rate / 1000; +} + +/* + * perf_ops->freq_set is not a synchronous, the actual OPP change will + * happen asynchronously and can get notified if the events are + * subscribed for by the SCMI firmware + */ +static int +scmi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct scmi_data *priv = policy->driver_data; + u64 freq = policy->freq_table[index].frequency; + + return perf_ops->freq_set(ph, priv->domain_id, freq * 1000, false); +} + +static unsigned int scmi_cpufreq_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + struct scmi_data *priv = policy->driver_data; + + if (!perf_ops->freq_set(ph, priv->domain_id, + target_freq * 1000, true)) + return target_freq; + + return 0; +} + +static int +scmi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) +{ + int cpu, domain, tdomain; + struct device *tcpu_dev; + + domain = perf_ops->device_domain_id(cpu_dev); + if (domain < 0) + return domain; + + for_each_possible_cpu(cpu) { + if (cpu == cpu_dev->id) + continue; + + tcpu_dev = get_cpu_device(cpu); + if (!tcpu_dev) + continue; + + tdomain = perf_ops->device_domain_id(tcpu_dev); + if (tdomain == domain) + cpumask_set_cpu(cpu, cpumask); + } + + return 0; +} + +static int __maybe_unused +scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power, + unsigned long *KHz) +{ + enum scmi_power_scale power_scale = perf_ops->power_scale_get(ph); + unsigned long Hz; + int ret, domain; + + domain = perf_ops->device_domain_id(cpu_dev); + if (domain < 0) + return domain; + + /* Get the power cost of the performance domain. */ + Hz = *KHz * 1000; + ret = perf_ops->est_power_get(ph, domain, &Hz, power); + if (ret) + return ret; + + /* Convert the power to uW if it is mW (ignore bogoW) */ + if (power_scale == SCMI_POWER_MILLIWATTS) + *power *= MICROWATT_PER_MILLIWATT; + + /* The EM framework specifies the frequency in KHz. */ + *KHz = Hz / 1000; + + return 0; +} + +static int scmi_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret, nr_opp; + unsigned int latency; + struct device *cpu_dev; + struct scmi_data *priv; + struct cpufreq_frequency_table *freq_table; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", policy->cpu); + return -ENODEV; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + if (!zalloc_cpumask_var(&priv->opp_shared_cpus, GFP_KERNEL)) { + ret = -ENOMEM; + goto out_free_priv; + } + + /* Obtain CPUs that share SCMI performance controls */ + ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus); + if (ret) { + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); + goto out_free_cpumask; + } + + /* + * Obtain CPUs that share performance levels. + * The OPP 'sharing cpus' info may come from DT through an empty opp + * table and opp-shared. + */ + ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, priv->opp_shared_cpus); + if (ret || cpumask_empty(priv->opp_shared_cpus)) { + /* + * Either opp-table is not set or no opp-shared was found. + * Use the CPU mask from SCMI to designate CPUs sharing an OPP + * table. + */ + cpumask_copy(priv->opp_shared_cpus, policy->cpus); + } + + /* + * A previous CPU may have marked OPPs as shared for a few CPUs, based on + * what OPP core provided. If the current CPU is part of those few, then + * there is no need to add OPPs again. + */ + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); + if (nr_opp <= 0) { + ret = perf_ops->device_opps_add(ph, cpu_dev); + if (ret) { + dev_warn(cpu_dev, "failed to add opps to the device\n"); + goto out_free_cpumask; + } + + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); + if (nr_opp <= 0) { + dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", + __func__, nr_opp); + + ret = -ENODEV; + goto out_free_opp; + } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, priv->opp_shared_cpus); + if (ret) { + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); + + goto out_free_opp; + } + + priv->nr_opp = nr_opp; + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out_free_opp; + } + + priv->cpu_dev = cpu_dev; + priv->domain_id = perf_ops->device_domain_id(cpu_dev); + + policy->driver_data = priv; + policy->freq_table = freq_table; + + /* SCMI allows DVFS request for any domain from any CPU */ + policy->dvfs_possible_from_any_cpu = true; + + latency = perf_ops->transition_latency_get(ph, cpu_dev); + if (!latency) + latency = CPUFREQ_ETERNAL; + + policy->cpuinfo.transition_latency = latency; + + policy->fast_switch_possible = + perf_ops->fast_switch_possible(ph, cpu_dev); + + return 0; + +out_free_opp: + dev_pm_opp_remove_all_dynamic(cpu_dev); + +out_free_cpumask: + free_cpumask_var(priv->opp_shared_cpus); + +out_free_priv: + kfree(priv); + + return ret; +} + +static int scmi_cpufreq_exit(struct cpufreq_policy *policy) +{ + struct scmi_data *priv = policy->driver_data; + + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + dev_pm_opp_remove_all_dynamic(priv->cpu_dev); + free_cpumask_var(priv->opp_shared_cpus); + kfree(priv); + + return 0; +} + +static void scmi_cpufreq_register_em(struct cpufreq_policy *policy) +{ + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); + enum scmi_power_scale power_scale = perf_ops->power_scale_get(ph); + struct scmi_data *priv = policy->driver_data; + bool em_power_scale = false; + + /* + * This callback will be called for each policy, but we don't need to + * register with EM every time. Despite not being part of the same + * policy, some CPUs may still share their perf-domains, and a CPU from + * another policy may already have registered with EM on behalf of CPUs + * of this policy. + */ + if (!priv->nr_opp) + return; + + if (power_scale == SCMI_POWER_MILLIWATTS + || power_scale == SCMI_POWER_MICROWATTS) + em_power_scale = true; + + em_dev_register_perf_domain(get_cpu_device(policy->cpu), priv->nr_opp, + &em_cb, priv->opp_shared_cpus, + em_power_scale); +} + +static struct cpufreq_driver scmi_cpufreq_driver = { + .name = "scmi", + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .attr = cpufreq_generic_attr, + .target_index = scmi_cpufreq_set_target, + .fast_switch = scmi_cpufreq_fast_switch, + .get = scmi_cpufreq_get_rate, + .init = scmi_cpufreq_init, + .exit = scmi_cpufreq_exit, + .register_em = scmi_cpufreq_register_em, +}; + +static int scmi_cpufreq_probe(struct scmi_device *sdev) +{ + int ret; + struct device *dev = &sdev->dev; + const struct scmi_handle *handle; + + handle = sdev->handle; + + if (!handle) + return -ENODEV; + + perf_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_PERF, &ph); + if (IS_ERR(perf_ops)) + return PTR_ERR(perf_ops); + +#ifdef CONFIG_COMMON_CLK + /* dummy clock provider as needed by OPP if clocks property is used */ + if (of_property_present(dev->of_node, "#clock-cells")) { + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); + if (ret) + return dev_err_probe(dev, ret, "%s: registering clock provider failed\n", __func__); + } +#endif + + ret = cpufreq_register_driver(&scmi_cpufreq_driver); + if (ret) { + dev_err(dev, "%s: registering cpufreq failed, err: %d\n", + __func__, ret); + } + + return ret; +} + +static void scmi_cpufreq_remove(struct scmi_device *sdev) +{ + cpufreq_unregister_driver(&scmi_cpufreq_driver); +} + +static const struct scmi_device_id scmi_id_table[] = { + { SCMI_PROTOCOL_PERF, "cpufreq" }, + { }, +}; +MODULE_DEVICE_TABLE(scmi, scmi_id_table); + +static struct scmi_driver scmi_cpufreq_drv = { + .name = "scmi-cpufreq", + .probe = scmi_cpufreq_probe, + .remove = scmi_cpufreq_remove, + .id_table = scmi_id_table, +}; +module_scmi_driver(scmi_cpufreq_drv); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCMI CPUFreq interface driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c new file mode 100644 index 000000000..fd2c16821 --- /dev/null +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * System Control and Power Interface (SCPI) based CPUFreq Interface driver + * + * Copyright (C) 2015 ARM Ltd. + * Sudeep Holla <sudeep.holla@arm.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/scpi_protocol.h> +#include <linux/slab.h> +#include <linux/types.h> + +struct scpi_data { + struct clk *clk; + struct device *cpu_dev; +}; + +static struct scpi_ops *scpi_ops; + +static unsigned int scpi_cpufreq_get_rate(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); + struct scpi_data *priv = policy->driver_data; + unsigned long rate = clk_get_rate(priv->clk); + + return rate / 1000; +} + +static int +scpi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) +{ + u64 rate = policy->freq_table[index].frequency * 1000; + struct scpi_data *priv = policy->driver_data; + int ret; + + ret = clk_set_rate(priv->clk, rate); + + if (ret) + return ret; + + if (clk_get_rate(priv->clk) != rate) + return -EIO; + + return 0; +} + +static int +scpi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) +{ + int cpu, domain, tdomain; + struct device *tcpu_dev; + + domain = scpi_ops->device_domain_id(cpu_dev); + if (domain < 0) + return domain; + + for_each_possible_cpu(cpu) { + if (cpu == cpu_dev->id) + continue; + + tcpu_dev = get_cpu_device(cpu); + if (!tcpu_dev) + continue; + + tdomain = scpi_ops->device_domain_id(tcpu_dev); + if (tdomain == domain) + cpumask_set_cpu(cpu, cpumask); + } + + return 0; +} + +static int scpi_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret; + unsigned int latency; + struct device *cpu_dev; + struct scpi_data *priv; + struct cpufreq_frequency_table *freq_table; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", policy->cpu); + return -ENODEV; + } + + ret = scpi_ops->add_opps_to_device(cpu_dev); + if (ret) { + dev_warn(cpu_dev, "failed to add opps to the device\n"); + return ret; + } + + ret = scpi_get_sharing_cpus(cpu_dev, policy->cpus); + if (ret) { + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); + return ret; + } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); + if (ret) { + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); + return ret; + } + + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n"); + ret = -EPROBE_DEFER; + goto out_free_opp; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out_free_opp; + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out_free_priv; + } + + priv->cpu_dev = cpu_dev; + priv->clk = clk_get(cpu_dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d\n", + __func__, cpu_dev->id); + ret = PTR_ERR(priv->clk); + goto out_free_cpufreq_table; + } + + policy->driver_data = priv; + policy->freq_table = freq_table; + + /* scpi allows DVFS request for any domain from any CPU */ + policy->dvfs_possible_from_any_cpu = true; + + latency = scpi_ops->get_transition_latency(cpu_dev); + if (!latency) + latency = CPUFREQ_ETERNAL; + + policy->cpuinfo.transition_latency = latency; + + policy->fast_switch_possible = false; + + return 0; + +out_free_cpufreq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_free_priv: + kfree(priv); +out_free_opp: + dev_pm_opp_remove_all_dynamic(cpu_dev); + + return ret; +} + +static int scpi_cpufreq_exit(struct cpufreq_policy *policy) +{ + struct scpi_data *priv = policy->driver_data; + + clk_put(priv->clk); + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + dev_pm_opp_remove_all_dynamic(priv->cpu_dev); + kfree(priv); + + return 0; +} + +static struct cpufreq_driver scpi_cpufreq_driver = { + .name = "scpi-cpufreq", + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .attr = cpufreq_generic_attr, + .get = scpi_cpufreq_get_rate, + .init = scpi_cpufreq_init, + .exit = scpi_cpufreq_exit, + .target_index = scpi_cpufreq_set_target, + .register_em = cpufreq_register_em_with_opp, +}; + +static int scpi_cpufreq_probe(struct platform_device *pdev) +{ + int ret; + + scpi_ops = get_scpi_ops(); + if (!scpi_ops) + return -EIO; + + ret = cpufreq_register_driver(&scpi_cpufreq_driver); + if (ret) + dev_err(&pdev->dev, "%s: registering cpufreq failed, err: %d\n", + __func__, ret); + return ret; +} + +static int scpi_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&scpi_cpufreq_driver); + scpi_ops = NULL; + return 0; +} + +static struct platform_driver scpi_cpufreq_platdrv = { + .driver = { + .name = "scpi-cpufreq", + }, + .probe = scpi_cpufreq_probe, + .remove = scpi_cpufreq_remove, +}; +module_platform_driver(scpi_cpufreq_platdrv); + +MODULE_ALIAS("platform:scpi-cpufreq"); +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c new file mode 100644 index 000000000..b8704232c --- /dev/null +++ b/drivers/cpufreq/sh-cpufreq.c @@ -0,0 +1,175 @@ +/* + * cpufreq driver for the SuperH processors. + * + * Copyright (C) 2002 - 2012 Paul Mundt + * Copyright (C) 2002 M. R. Brown + * + * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c + * + * Copyright (C) 2004-2007 Atmel Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) "cpufreq: " fmt + +#include <linux/types.h> +#include <linux/cpufreq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/cpumask.h> +#include <linux/cpu.h> +#include <linux/smp.h> +#include <linux/clk.h> +#include <linux/percpu.h> +#include <linux/sh_clk.h> + +static DEFINE_PER_CPU(struct clk, sh_cpuclk); + +struct cpufreq_target { + struct cpufreq_policy *policy; + unsigned int freq; +}; + +static unsigned int sh_cpufreq_get(unsigned int cpu) +{ + return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000; +} + +static long __sh_cpufreq_target(void *arg) +{ + struct cpufreq_target *target = arg; + struct cpufreq_policy *policy = target->policy; + int cpu = policy->cpu; + struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); + struct cpufreq_freqs freqs; + struct device *dev; + long freq; + + if (smp_processor_id() != cpu) + return -ENODEV; + + dev = get_cpu_device(cpu); + + /* Convert target_freq from kHz to Hz */ + freq = clk_round_rate(cpuclk, target->freq * 1000); + + if (freq < (policy->min * 1000) || freq > (policy->max * 1000)) + return -EINVAL; + + dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000); + + freqs.old = sh_cpufreq_get(cpu); + freqs.new = (freq + 500) / 1000; + freqs.flags = 0; + + cpufreq_freq_transition_begin(target->policy, &freqs); + clk_set_rate(cpuclk, freq); + cpufreq_freq_transition_end(target->policy, &freqs, 0); + + dev_dbg(dev, "set frequency %lu Hz\n", freq); + return 0; +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int sh_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_target data = { .policy = policy, .freq = target_freq }; + + return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data); +} + +static int sh_cpufreq_verify(struct cpufreq_policy_data *policy) +{ + struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu); + struct cpufreq_frequency_table *freq_table; + + freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; + if (freq_table) + return cpufreq_frequency_table_verify(policy, freq_table); + + cpufreq_verify_within_cpu_limits(policy); + + policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000; + policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; + + cpufreq_verify_within_cpu_limits(policy); + return 0; +} + +static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); + struct cpufreq_frequency_table *freq_table; + struct device *dev; + + dev = get_cpu_device(cpu); + + cpuclk = clk_get(dev, "cpu_clk"); + if (IS_ERR(cpuclk)) { + dev_err(dev, "couldn't get CPU clk\n"); + return PTR_ERR(cpuclk); + } + + freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; + if (freq_table) { + policy->freq_table = freq_table; + } else { + dev_notice(dev, "no frequency table found, falling back " + "to rate rounding.\n"); + + policy->min = policy->cpuinfo.min_freq = + (clk_round_rate(cpuclk, 1) + 500) / 1000; + policy->max = policy->cpuinfo.max_freq = + (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; + } + + return 0; +} + +static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); + + clk_put(cpuclk); + + return 0; +} + +static struct cpufreq_driver sh_cpufreq_driver = { + .name = "sh", + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .get = sh_cpufreq_get, + .target = sh_cpufreq_target, + .verify = sh_cpufreq_verify, + .init = sh_cpufreq_cpu_init, + .exit = sh_cpufreq_cpu_exit, + .attr = cpufreq_generic_attr, +}; + +static int __init sh_cpufreq_module_init(void) +{ + pr_notice("SuperH CPU frequency driver.\n"); + return cpufreq_register_driver(&sh_cpufreq_driver); +} + +static void __exit sh_cpufreq_module_exit(void) +{ + cpufreq_unregister_driver(&sh_cpufreq_driver); +} + +module_init(sh_cpufreq_module_init); +module_exit(sh_cpufreq_module_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); +MODULE_DESCRIPTION("cpufreq driver for SuperH"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c new file mode 100644 index 000000000..92acbb25a --- /dev/null +++ b/drivers/cpufreq/sparc-us2e-cpufreq.c @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* us2e_cpufreq.c: UltraSPARC-IIe cpu frequency support + * + * Copyright (C) 2003 David S. Miller (davem@redhat.com) + * + * Many thanks to Dominik Brodowski for fixing up the cpufreq + * infrastructure in order to make this driver easier to implement. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/threads.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <asm/asi.h> +#include <asm/timer.h> + +static struct cpufreq_driver *cpufreq_us2e_driver; + +struct us2e_freq_percpu_info { + struct cpufreq_frequency_table table[6]; +}; + +/* Indexed by cpu number. */ +static struct us2e_freq_percpu_info *us2e_freq_table; + +#define HBIRD_MEM_CNTL0_ADDR 0x1fe0000f010UL +#define HBIRD_ESTAR_MODE_ADDR 0x1fe0000f080UL + +/* UltraSPARC-IIe has five dividers: 1, 2, 4, 6, and 8. These are controlled + * in the ESTAR mode control register. + */ +#define ESTAR_MODE_DIV_1 0x0000000000000000UL +#define ESTAR_MODE_DIV_2 0x0000000000000001UL +#define ESTAR_MODE_DIV_4 0x0000000000000003UL +#define ESTAR_MODE_DIV_6 0x0000000000000002UL +#define ESTAR_MODE_DIV_8 0x0000000000000004UL +#define ESTAR_MODE_DIV_MASK 0x0000000000000007UL + +#define MCTRL0_SREFRESH_ENAB 0x0000000000010000UL +#define MCTRL0_REFR_COUNT_MASK 0x0000000000007f00UL +#define MCTRL0_REFR_COUNT_SHIFT 8 +#define MCTRL0_REFR_INTERVAL 7800 +#define MCTRL0_REFR_CLKS_P_CNT 64 + +static unsigned long read_hbreg(unsigned long addr) +{ + unsigned long ret; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=&r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + return ret; +} + +static void write_hbreg(unsigned long addr, unsigned long val) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); + if (addr == HBIRD_ESTAR_MODE_ADDR) { + /* Need to wait 16 clock cycles for the PLL to lock. */ + udelay(1); + } +} + +static void self_refresh_ctl(int enable) +{ + unsigned long mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); + + if (enable) + mctrl |= MCTRL0_SREFRESH_ENAB; + else + mctrl &= ~MCTRL0_SREFRESH_ENAB; + write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl); + (void) read_hbreg(HBIRD_MEM_CNTL0_ADDR); +} + +static void frob_mem_refresh(int cpu_slowing_down, + unsigned long clock_tick, + unsigned long old_divisor, unsigned long divisor) +{ + unsigned long old_refr_count, refr_count, mctrl; + + refr_count = (clock_tick * MCTRL0_REFR_INTERVAL); + refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL); + + mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); + old_refr_count = (mctrl & MCTRL0_REFR_COUNT_MASK) + >> MCTRL0_REFR_COUNT_SHIFT; + + mctrl &= ~MCTRL0_REFR_COUNT_MASK; + mctrl |= refr_count << MCTRL0_REFR_COUNT_SHIFT; + write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl); + mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); + + if (cpu_slowing_down && !(mctrl & MCTRL0_SREFRESH_ENAB)) { + unsigned long usecs; + + /* We have to wait for both refresh counts (old + * and new) to go to zero. + */ + usecs = (MCTRL0_REFR_CLKS_P_CNT * + (refr_count + old_refr_count) * + 1000000UL * + old_divisor) / clock_tick; + udelay(usecs + 1UL); + } +} + +static void us2e_transition(unsigned long estar, unsigned long new_bits, + unsigned long clock_tick, + unsigned long old_divisor, unsigned long divisor) +{ + estar &= ~ESTAR_MODE_DIV_MASK; + + /* This is based upon the state transition diagram in the IIe manual. */ + if (old_divisor == 2 && divisor == 1) { + self_refresh_ctl(0); + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + frob_mem_refresh(0, clock_tick, old_divisor, divisor); + } else if (old_divisor == 1 && divisor == 2) { + frob_mem_refresh(1, clock_tick, old_divisor, divisor); + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + self_refresh_ctl(1); + } else if (old_divisor == 1 && divisor > 2) { + us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick, + 1, 2); + us2e_transition(estar, new_bits, clock_tick, + 2, divisor); + } else if (old_divisor > 2 && divisor == 1) { + us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick, + old_divisor, 2); + us2e_transition(estar, new_bits, clock_tick, + 2, divisor); + } else if (old_divisor < divisor) { + frob_mem_refresh(0, clock_tick, old_divisor, divisor); + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + } else if (old_divisor > divisor) { + write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); + frob_mem_refresh(1, clock_tick, old_divisor, divisor); + } else { + BUG(); + } +} + +static unsigned long index_to_estar_mode(unsigned int index) +{ + switch (index) { + case 0: + return ESTAR_MODE_DIV_1; + + case 1: + return ESTAR_MODE_DIV_2; + + case 2: + return ESTAR_MODE_DIV_4; + + case 3: + return ESTAR_MODE_DIV_6; + + case 4: + return ESTAR_MODE_DIV_8; + + default: + BUG(); + } +} + +static unsigned long index_to_divisor(unsigned int index) +{ + switch (index) { + case 0: + return 1; + + case 1: + return 2; + + case 2: + return 4; + + case 3: + return 6; + + case 4: + return 8; + + default: + BUG(); + } +} + +static unsigned long estar_to_divisor(unsigned long estar) +{ + unsigned long ret; + + switch (estar & ESTAR_MODE_DIV_MASK) { + case ESTAR_MODE_DIV_1: + ret = 1; + break; + case ESTAR_MODE_DIV_2: + ret = 2; + break; + case ESTAR_MODE_DIV_4: + ret = 4; + break; + case ESTAR_MODE_DIV_6: + ret = 6; + break; + case ESTAR_MODE_DIV_8: + ret = 8; + break; + default: + BUG(); + } + + return ret; +} + +static void __us2e_freq_get(void *arg) +{ + unsigned long *estar = arg; + + *estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); +} + +static unsigned int us2e_freq_get(unsigned int cpu) +{ + unsigned long clock_tick, estar; + + clock_tick = sparc64_get_clock_tick(cpu) / 1000; + if (smp_call_function_single(cpu, __us2e_freq_get, &estar, 1)) + return 0; + + return clock_tick / estar_to_divisor(estar); +} + +static void __us2e_freq_target(void *arg) +{ + unsigned int cpu = smp_processor_id(); + unsigned int *index = arg; + unsigned long new_bits, new_freq; + unsigned long clock_tick, divisor, old_divisor, estar; + + new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000; + new_bits = index_to_estar_mode(*index); + divisor = index_to_divisor(*index); + new_freq /= divisor; + + estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); + + old_divisor = estar_to_divisor(estar); + + if (old_divisor != divisor) { + us2e_transition(estar, new_bits, clock_tick * 1000, + old_divisor, divisor); + } +} + +static int us2e_freq_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int cpu = policy->cpu; + + return smp_call_function_single(cpu, __us2e_freq_target, &index, 1); +} + +static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; + struct cpufreq_frequency_table *table = + &us2e_freq_table[cpu].table[0]; + + table[0].driver_data = 0; + table[0].frequency = clock_tick / 1; + table[1].driver_data = 1; + table[1].frequency = clock_tick / 2; + table[2].driver_data = 2; + table[2].frequency = clock_tick / 4; + table[2].driver_data = 3; + table[2].frequency = clock_tick / 6; + table[2].driver_data = 4; + table[2].frequency = clock_tick / 8; + table[2].driver_data = 5; + table[3].frequency = CPUFREQ_TABLE_END; + + policy->cpuinfo.transition_latency = 0; + policy->cur = clock_tick; + policy->freq_table = table; + + return 0; +} + +static int us2e_freq_cpu_exit(struct cpufreq_policy *policy) +{ + if (cpufreq_us2e_driver) + us2e_freq_target(policy, 0); + + return 0; +} + +static int __init us2e_freq_init(void) +{ + unsigned long manuf, impl, ver; + int ret; + + if (tlb_type != spitfire) + return -ENODEV; + + __asm__("rdpr %%ver, %0" : "=r" (ver)); + manuf = ((ver >> 48) & 0xffff); + impl = ((ver >> 32) & 0xffff); + + if (manuf == 0x17 && impl == 0x13) { + struct cpufreq_driver *driver; + + ret = -ENOMEM; + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (!driver) + goto err_out; + + us2e_freq_table = kzalloc((NR_CPUS * sizeof(*us2e_freq_table)), + GFP_KERNEL); + if (!us2e_freq_table) + goto err_out; + + driver->init = us2e_freq_cpu_init; + driver->verify = cpufreq_generic_frequency_table_verify; + driver->target_index = us2e_freq_target; + driver->get = us2e_freq_get; + driver->exit = us2e_freq_cpu_exit; + strcpy(driver->name, "UltraSPARC-IIe"); + + cpufreq_us2e_driver = driver; + ret = cpufreq_register_driver(driver); + if (ret) + goto err_out; + + return 0; + +err_out: + if (driver) { + kfree(driver); + cpufreq_us2e_driver = NULL; + } + kfree(us2e_freq_table); + us2e_freq_table = NULL; + return ret; + } + + return -ENODEV; +} + +static void __exit us2e_freq_exit(void) +{ + if (cpufreq_us2e_driver) { + cpufreq_unregister_driver(cpufreq_us2e_driver); + kfree(cpufreq_us2e_driver); + cpufreq_us2e_driver = NULL; + kfree(us2e_freq_table); + us2e_freq_table = NULL; + } +} + +MODULE_AUTHOR("David S. Miller <davem@redhat.com>"); +MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-IIe"); +MODULE_LICENSE("GPL"); + +module_init(us2e_freq_init); +module_exit(us2e_freq_exit); diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c new file mode 100644 index 000000000..e41b35b16 --- /dev/null +++ b/drivers/cpufreq/sparc-us3-cpufreq.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* us3_cpufreq.c: UltraSPARC-III cpu frequency support + * + * Copyright (C) 2003 David S. Miller (davem@redhat.com) + * + * Many thanks to Dominik Brodowski for fixing up the cpufreq + * infrastructure in order to make this driver easier to implement. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/threads.h> +#include <linux/slab.h> +#include <linux/init.h> + +#include <asm/head.h> +#include <asm/timer.h> + +static struct cpufreq_driver *cpufreq_us3_driver; + +struct us3_freq_percpu_info { + struct cpufreq_frequency_table table[4]; +}; + +/* Indexed by cpu number. */ +static struct us3_freq_percpu_info *us3_freq_table; + +/* UltraSPARC-III has three dividers: 1, 2, and 32. These are controlled + * in the Safari config register. + */ +#define SAFARI_CFG_DIV_1 0x0000000000000000UL +#define SAFARI_CFG_DIV_2 0x0000000040000000UL +#define SAFARI_CFG_DIV_32 0x0000000080000000UL +#define SAFARI_CFG_DIV_MASK 0x00000000C0000000UL + +static void read_safari_cfg(void *arg) +{ + unsigned long ret, *val = arg; + + __asm__ __volatile__("ldxa [%%g0] %1, %0" + : "=&r" (ret) + : "i" (ASI_SAFARI_CONFIG)); + *val = ret; +} + +static void update_safari_cfg(void *arg) +{ + unsigned long reg, *new_bits = arg; + + read_safari_cfg(®); + reg &= ~SAFARI_CFG_DIV_MASK; + reg |= *new_bits; + + __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" + "membar #Sync" + : /* no outputs */ + : "r" (reg), "i" (ASI_SAFARI_CONFIG) + : "memory"); +} + +static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg) +{ + unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; + unsigned long ret; + + switch (safari_cfg & SAFARI_CFG_DIV_MASK) { + case SAFARI_CFG_DIV_1: + ret = clock_tick / 1; + break; + case SAFARI_CFG_DIV_2: + ret = clock_tick / 2; + break; + case SAFARI_CFG_DIV_32: + ret = clock_tick / 32; + break; + default: + BUG(); + } + + return ret; +} + +static unsigned int us3_freq_get(unsigned int cpu) +{ + unsigned long reg; + + if (smp_call_function_single(cpu, read_safari_cfg, ®, 1)) + return 0; + return get_current_freq(cpu, reg); +} + +static int us3_freq_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int cpu = policy->cpu; + unsigned long new_bits, new_freq; + + new_freq = sparc64_get_clock_tick(cpu) / 1000; + switch (index) { + case 0: + new_bits = SAFARI_CFG_DIV_1; + new_freq /= 1; + break; + case 1: + new_bits = SAFARI_CFG_DIV_2; + new_freq /= 2; + break; + case 2: + new_bits = SAFARI_CFG_DIV_32; + new_freq /= 32; + break; + + default: + BUG(); + } + + return smp_call_function_single(cpu, update_safari_cfg, &new_bits, 1); +} + +static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; + struct cpufreq_frequency_table *table = + &us3_freq_table[cpu].table[0]; + + table[0].driver_data = 0; + table[0].frequency = clock_tick / 1; + table[1].driver_data = 1; + table[1].frequency = clock_tick / 2; + table[2].driver_data = 2; + table[2].frequency = clock_tick / 32; + table[3].driver_data = 0; + table[3].frequency = CPUFREQ_TABLE_END; + + policy->cpuinfo.transition_latency = 0; + policy->cur = clock_tick; + policy->freq_table = table; + + return 0; +} + +static int us3_freq_cpu_exit(struct cpufreq_policy *policy) +{ + if (cpufreq_us3_driver) + us3_freq_target(policy, 0); + + return 0; +} + +static int __init us3_freq_init(void) +{ + unsigned long manuf, impl, ver; + int ret; + + if (tlb_type != cheetah && tlb_type != cheetah_plus) + return -ENODEV; + + __asm__("rdpr %%ver, %0" : "=r" (ver)); + manuf = ((ver >> 48) & 0xffff); + impl = ((ver >> 32) & 0xffff); + + if (manuf == CHEETAH_MANUF && + (impl == CHEETAH_IMPL || + impl == CHEETAH_PLUS_IMPL || + impl == JAGUAR_IMPL || + impl == PANTHER_IMPL)) { + struct cpufreq_driver *driver; + + ret = -ENOMEM; + driver = kzalloc(sizeof(*driver), GFP_KERNEL); + if (!driver) + goto err_out; + + us3_freq_table = kzalloc((NR_CPUS * sizeof(*us3_freq_table)), + GFP_KERNEL); + if (!us3_freq_table) + goto err_out; + + driver->init = us3_freq_cpu_init; + driver->verify = cpufreq_generic_frequency_table_verify; + driver->target_index = us3_freq_target; + driver->get = us3_freq_get; + driver->exit = us3_freq_cpu_exit; + strcpy(driver->name, "UltraSPARC-III"); + + cpufreq_us3_driver = driver; + ret = cpufreq_register_driver(driver); + if (ret) + goto err_out; + + return 0; + +err_out: + if (driver) { + kfree(driver); + cpufreq_us3_driver = NULL; + } + kfree(us3_freq_table); + us3_freq_table = NULL; + return ret; + } + + return -ENODEV; +} + +static void __exit us3_freq_exit(void) +{ + if (cpufreq_us3_driver) { + cpufreq_unregister_driver(cpufreq_us3_driver); + kfree(cpufreq_us3_driver); + cpufreq_us3_driver = NULL; + kfree(us3_freq_table); + us3_freq_table = NULL; + } +} + +MODULE_AUTHOR("David S. Miller <davem@redhat.com>"); +MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-III"); +MODULE_LICENSE("GPL"); + +module_init(us3_freq_init); +module_exit(us3_freq_exit); diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c new file mode 100644 index 000000000..7d0d62a06 --- /dev/null +++ b/drivers/cpufreq/spear-cpufreq.c @@ -0,0 +1,247 @@ +/* + * drivers/cpufreq/spear-cpufreq.c + * + * CPU Frequency Scaling for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Deepak Sikri <deepak.sikri@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> + +/* SPEAr CPUFreq driver data structure */ +static struct { + struct clk *clk; + unsigned int transition_latency; + struct cpufreq_frequency_table *freq_tbl; + u32 cnt; +} spear_cpufreq; + +static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq) +{ + struct clk *sys_pclk; + int pclk; + /* + * In SPEAr1340, cpu clk's parent sys clk can take input from + * following sources + */ + const char *sys_clk_src[] = { + "sys_syn_clk", + "pll1_clk", + "pll2_clk", + "pll3_clk", + }; + + /* + * As sys clk can have multiple source with their own range + * limitation so we choose possible sources accordingly + */ + if (newfreq <= 300000000) + pclk = 0; /* src is sys_syn_clk */ + else if (newfreq > 300000000 && newfreq <= 500000000) + pclk = 3; /* src is pll3_clk */ + else if (newfreq == 600000000) + pclk = 1; /* src is pll1_clk */ + else + return ERR_PTR(-EINVAL); + + /* Get parent to sys clock */ + sys_pclk = clk_get(NULL, sys_clk_src[pclk]); + if (IS_ERR(sys_pclk)) + pr_err("Failed to get %s clock\n", sys_clk_src[pclk]); + + return sys_pclk; +} + +/* + * In SPEAr1340, we cannot use newfreq directly because we need to actually + * access a source clock (clk) which might not be ancestor of cpu at present. + * Hence in SPEAr1340 we would operate on source clock directly before switching + * cpu clock to it. + */ +static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq) +{ + struct clk *sys_clk; + int ret = 0; + + sys_clk = clk_get_parent(spear_cpufreq.clk); + if (IS_ERR(sys_clk)) { + pr_err("failed to get cpu's parent (sys) clock\n"); + return PTR_ERR(sys_clk); + } + + /* Set the rate of the source clock before changing the parent */ + ret = clk_set_rate(sys_pclk, newfreq); + if (ret) { + pr_err("Failed to set sys clk rate to %lu\n", newfreq); + return ret; + } + + ret = clk_set_parent(sys_clk, sys_pclk); + if (ret) { + pr_err("Failed to set sys clk parent\n"); + return ret; + } + + return 0; +} + +static int spear_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + long newfreq; + struct clk *srcclk; + int ret, mult = 1; + + newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000; + + if (of_machine_is_compatible("st,spear1340")) { + /* + * SPEAr1340 is special in the sense that due to the possibility + * of multiple clock sources for cpu clk's parent we can have + * different clock source for different frequency of cpu clk. + * Hence we need to choose one from amongst these possible clock + * sources. + */ + srcclk = spear1340_cpu_get_possible_parent(newfreq); + if (IS_ERR(srcclk)) { + pr_err("Failed to get src clk\n"); + return PTR_ERR(srcclk); + } + + /* SPEAr1340: src clk is always 2 * intended cpu clk */ + mult = 2; + } else { + /* + * src clock to be altered is ancestor of cpu clock. Hence we + * can directly work on cpu clk + */ + srcclk = spear_cpufreq.clk; + } + + newfreq = clk_round_rate(srcclk, newfreq * mult); + if (newfreq <= 0) { + pr_err("clk_round_rate failed for cpu src clock\n"); + return newfreq; + } + + if (mult == 2) + ret = spear1340_set_cpu_rate(srcclk, newfreq); + else + ret = clk_set_rate(spear_cpufreq.clk, newfreq); + + if (ret) + pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret); + + return ret; +} + +static int spear_cpufreq_init(struct cpufreq_policy *policy) +{ + policy->clk = spear_cpufreq.clk; + cpufreq_generic_init(policy, spear_cpufreq.freq_tbl, + spear_cpufreq.transition_latency); + return 0; +} + +static struct cpufreq_driver spear_cpufreq_driver = { + .name = "cpufreq-spear", + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = spear_cpufreq_target, + .get = cpufreq_generic_get, + .init = spear_cpufreq_init, + .attr = cpufreq_generic_attr, +}; + +static int spear_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + const struct property *prop; + struct cpufreq_frequency_table *freq_tbl; + const __be32 *val; + int cnt, i, ret; + + np = of_cpu_device_node_get(0); + if (!np) { + pr_err("No cpu node found\n"); + return -ENODEV; + } + + if (of_property_read_u32(np, "clock-latency", + &spear_cpufreq.transition_latency)) + spear_cpufreq.transition_latency = CPUFREQ_ETERNAL; + + prop = of_find_property(np, "cpufreq_tbl", NULL); + if (!prop || !prop->value) { + pr_err("Invalid cpufreq_tbl\n"); + ret = -ENODEV; + goto out_put_node; + } + + cnt = prop->length / sizeof(u32); + val = prop->value; + + freq_tbl = kcalloc(cnt + 1, sizeof(*freq_tbl), GFP_KERNEL); + if (!freq_tbl) { + ret = -ENOMEM; + goto out_put_node; + } + + for (i = 0; i < cnt; i++) + freq_tbl[i].frequency = be32_to_cpup(val++); + + freq_tbl[i].frequency = CPUFREQ_TABLE_END; + + spear_cpufreq.freq_tbl = freq_tbl; + + of_node_put(np); + + spear_cpufreq.clk = clk_get(NULL, "cpu_clk"); + if (IS_ERR(spear_cpufreq.clk)) { + pr_err("Unable to get CPU clock\n"); + ret = PTR_ERR(spear_cpufreq.clk); + goto out_put_mem; + } + + ret = cpufreq_register_driver(&spear_cpufreq_driver); + if (!ret) + return 0; + + pr_err("failed register driver: %d\n", ret); + clk_put(spear_cpufreq.clk); + +out_put_mem: + kfree(freq_tbl); + return ret; + +out_put_node: + of_node_put(np); + return ret; +} + +static struct platform_driver spear_cpufreq_platdrv = { + .driver = { + .name = "spear-cpufreq", + }, + .probe = spear_cpufreq_probe, +}; +module_platform_driver(spear_cpufreq_platdrv); + +MODULE_AUTHOR("Deepak Sikri <deepak.sikri@st.com>"); +MODULE_DESCRIPTION("SPEAr CPUFreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c new file mode 100644 index 000000000..75b10ecdb --- /dev/null +++ b/drivers/cpufreq/speedstep-centrino.c @@ -0,0 +1,561 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium + * M (part of the Centrino chipset). + * + * Since the original Pentium M, most new Intel CPUs support Enhanced + * SpeedStep. + * + * Despite the "SpeedStep" in the name, this is almost entirely unlike + * traditional SpeedStep. + * + * Modelled on speedstep.c + * + * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/sched.h> /* current */ +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/gfp.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpufeature.h> +#include <asm/cpu_device_id.h> + +#define MAINTAINER "linux-pm@vger.kernel.org" + +#define INTEL_MSR_RANGE (0xffff) + +struct cpu_id +{ + __u8 x86; /* CPU family */ + __u8 x86_model; /* model */ + __u8 x86_stepping; /* stepping */ +}; + +enum { + CPU_BANIAS, + CPU_DOTHAN_A1, + CPU_DOTHAN_A2, + CPU_DOTHAN_B0, + CPU_MP4HT_D0, + CPU_MP4HT_E0, +}; + +static const struct cpu_id cpu_ids[] = { + [CPU_BANIAS] = { 6, 9, 5 }, + [CPU_DOTHAN_A1] = { 6, 13, 1 }, + [CPU_DOTHAN_A2] = { 6, 13, 2 }, + [CPU_DOTHAN_B0] = { 6, 13, 6 }, + [CPU_MP4HT_D0] = {15, 3, 4 }, + [CPU_MP4HT_E0] = {15, 4, 1 }, +}; +#define N_IDS ARRAY_SIZE(cpu_ids) + +struct cpu_model +{ + const struct cpu_id *cpu_id; + const char *model_name; + unsigned max_freq; /* max clock in kHz */ + + struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ +}; +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, + const struct cpu_id *x); + +/* Operating points for current CPU */ +static DEFINE_PER_CPU(struct cpu_model *, centrino_model); +static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu); + +static struct cpufreq_driver centrino_driver; + +#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE + +/* Computes the correct form for IA32_PERF_CTL MSR for a particular + frequency/voltage operating point; frequency in MHz, volts in mV. + This is stored as "driver_data" in the structure. */ +#define OP(mhz, mv) \ + { \ + .frequency = (mhz) * 1000, \ + .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ + } + +/* + * These voltage tables were derived from the Intel Pentium M + * datasheet, document 25261202.pdf, Table 5. I have verified they + * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium + * M. + */ + +/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ +static struct cpufreq_frequency_table banias_900[] = +{ + OP(600, 844), + OP(800, 988), + OP(900, 1004), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ +static struct cpufreq_frequency_table banias_1000[] = +{ + OP(600, 844), + OP(800, 972), + OP(900, 988), + OP(1000, 1004), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ +static struct cpufreq_frequency_table banias_1100[] = +{ + OP( 600, 956), + OP( 800, 1020), + OP( 900, 1100), + OP(1000, 1164), + OP(1100, 1180), + { .frequency = CPUFREQ_TABLE_END } +}; + + +/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ +static struct cpufreq_frequency_table banias_1200[] = +{ + OP( 600, 956), + OP( 800, 1004), + OP( 900, 1020), + OP(1000, 1100), + OP(1100, 1164), + OP(1200, 1180), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.30GHz (Banias) */ +static struct cpufreq_frequency_table banias_1300[] = +{ + OP( 600, 956), + OP( 800, 1260), + OP(1000, 1292), + OP(1200, 1356), + OP(1300, 1388), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.40GHz (Banias) */ +static struct cpufreq_frequency_table banias_1400[] = +{ + OP( 600, 956), + OP( 800, 1180), + OP(1000, 1308), + OP(1200, 1436), + OP(1400, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.50GHz (Banias) */ +static struct cpufreq_frequency_table banias_1500[] = +{ + OP( 600, 956), + OP( 800, 1116), + OP(1000, 1228), + OP(1200, 1356), + OP(1400, 1452), + OP(1500, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.60GHz (Banias) */ +static struct cpufreq_frequency_table banias_1600[] = +{ + OP( 600, 956), + OP( 800, 1036), + OP(1000, 1164), + OP(1200, 1276), + OP(1400, 1420), + OP(1600, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.70GHz (Banias) */ +static struct cpufreq_frequency_table banias_1700[] = +{ + OP( 600, 956), + OP( 800, 1004), + OP(1000, 1116), + OP(1200, 1228), + OP(1400, 1308), + OP(1700, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; +#undef OP + +#define _BANIAS(cpuid, max, name) \ +{ .cpu_id = cpuid, \ + .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ + .max_freq = (max)*1000, \ + .op_points = banias_##max, \ +} +#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) + +/* CPU models, their operating frequency range, and freq/voltage + operating points */ +static struct cpu_model models[] = +{ + _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), + BANIAS(1000), + BANIAS(1100), + BANIAS(1200), + BANIAS(1300), + BANIAS(1400), + BANIAS(1500), + BANIAS(1600), + BANIAS(1700), + + /* NULL model_name is a wildcard */ + { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, + { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, + { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, + + { NULL, } +}; +#undef _BANIAS +#undef BANIAS + +static int centrino_cpu_init_table(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); + struct cpu_model *model; + + for(model = models; model->cpu_id != NULL; model++) + if (centrino_verify_cpu_id(cpu, model->cpu_id) && + (model->model_name == NULL || + strcmp(cpu->x86_model_id, model->model_name) == 0)) + break; + + if (model->cpu_id == NULL) { + /* No match at all */ + pr_debug("no support for CPU model \"%s\": " + "send /proc/cpuinfo to " MAINTAINER "\n", + cpu->x86_model_id); + return -ENOENT; + } + + if (model->op_points == NULL) { + /* Matched a non-match */ + pr_debug("no table support for CPU model \"%s\"\n", + cpu->x86_model_id); + pr_debug("try using the acpi-cpufreq driver\n"); + return -ENOENT; + } + + per_cpu(centrino_model, policy->cpu) = model; + + pr_debug("found \"%s\": max frequency: %dkHz\n", + model->model_name, model->max_freq); + + return 0; +} + +#else +static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) +{ + return -ENODEV; +} +#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ + +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, + const struct cpu_id *x) +{ + if ((c->x86 == x->x86) && + (c->x86_model == x->x86_model) && + (c->x86_stepping == x->x86_stepping)) + return 1; + return 0; +} + +/* To be called only after centrino_model is initialized */ +static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) +{ + int i; + + /* + * Extract clock in kHz from PERF_CTL value + * for centrino, as some DSDTs are buggy. + * Ideally, this can be done using the acpi_data structure. + */ + if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) || + (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) || + (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) { + msr = (msr >> 8) & 0xff; + return msr * 100000; + } + + if ((!per_cpu(centrino_model, cpu)) || + (!per_cpu(centrino_model, cpu)->op_points)) + return 0; + + msr &= 0xffff; + for (i = 0; + per_cpu(centrino_model, cpu)->op_points[i].frequency + != CPUFREQ_TABLE_END; + i++) { + if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data) + return per_cpu(centrino_model, cpu)-> + op_points[i].frequency; + } + if (failsafe) + return per_cpu(centrino_model, cpu)->op_points[i-1].frequency; + else + return 0; +} + +/* Return the current CPU frequency in kHz */ +static unsigned int get_cur_freq(unsigned int cpu) +{ + unsigned l, h; + unsigned clock_freq; + + rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h); + clock_freq = extract_clock(l, cpu, 0); + + if (unlikely(clock_freq == 0)) { + /* + * On some CPUs, we can see transient MSR values (which are + * not present in _PSS), while CPU is doing some automatic + * P-state transition (like TM2). Get the last freq set + * in PERF_CTL. + */ + rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h); + clock_freq = extract_clock(l, cpu, 1); + } + return clock_freq; +} + + +static int centrino_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); + unsigned l, h; + int i; + + /* Only Intel makes Enhanced Speedstep-capable CPUs */ + if (cpu->x86_vendor != X86_VENDOR_INTEL || + !cpu_has(cpu, X86_FEATURE_EST)) + return -ENODEV; + + if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) + centrino_driver.flags |= CPUFREQ_CONST_LOOPS; + + if (policy->cpu != 0) + return -ENODEV; + + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; + + if (i != N_IDS) + per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i]; + + if (!per_cpu(centrino_cpu, policy->cpu)) { + pr_debug("found unsupported CPU with " + "Enhanced SpeedStep: send /proc/cpuinfo to " + MAINTAINER "\n"); + return -ENODEV; + } + + if (centrino_cpu_init_table(policy)) + return -ENODEV; + + /* Check to see if Enhanced SpeedStep is enabled, and try to + enable it if not. */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + + if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; + pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l); + wrmsr(MSR_IA32_MISC_ENABLE, l, h); + + /* check to see if it stuck */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { + pr_info("couldn't enable Enhanced SpeedStep\n"); + return -ENODEV; + } + } + + policy->cpuinfo.transition_latency = 10000; + /* 10uS transition latency */ + policy->freq_table = per_cpu(centrino_model, policy->cpu)->op_points; + + return 0; +} + +static int centrino_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + + if (!per_cpu(centrino_model, cpu)) + return -ENODEV; + + per_cpu(centrino_model, cpu) = NULL; + + return 0; +} + +/** + * centrino_target - set a new CPUFreq policy + * @policy: new policy + * @index: index of target frequency + * + * Sets a new CPUFreq policy. + */ +static int centrino_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; + int retval = 0; + unsigned int j, first_cpu; + struct cpufreq_frequency_table *op_points; + cpumask_var_t covered_cpus; + + if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) + return -ENOMEM; + + if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { + retval = -ENODEV; + goto out; + } + + first_cpu = 1; + op_points = &per_cpu(centrino_model, cpu)->op_points[index]; + for_each_cpu(j, policy->cpus) { + int good_cpu; + + /* + * Support for SMP systems. + * Make sure we are running on CPU that wants to change freq + */ + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + good_cpu = cpumask_any_and(policy->cpus, + cpu_online_mask); + else + good_cpu = j; + + if (good_cpu >= nr_cpu_ids) { + pr_debug("couldn't limit to CPUs in this domain\n"); + retval = -EAGAIN; + if (first_cpu) { + /* We haven't started the transition yet. */ + goto out; + } + break; + } + + msr = op_points->driver_data; + + if (first_cpu) { + rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); + if (msr == (oldmsr & 0xffff)) { + pr_debug("no change needed - msr was and needs " + "to be %x\n", oldmsr); + retval = 0; + goto out; + } + + first_cpu = 0; + /* all but 16 LSB are reserved, treat them with care */ + oldmsr &= ~0xffff; + msr &= 0xffff; + oldmsr |= msr; + } + + wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + break; + + cpumask_set_cpu(j, covered_cpus); + } + + if (unlikely(retval)) { + /* + * We have failed halfway through the frequency change. + * We have sent callbacks to policy->cpus and + * MSRs have already been written on coverd_cpus. + * Best effort undo.. + */ + + for_each_cpu(j, covered_cpus) + wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h); + } + retval = 0; + +out: + free_cpumask_var(covered_cpus); + return retval; +} + +static struct cpufreq_driver centrino_driver = { + .name = "centrino", /* should be speedstep-centrino, + but there's a 16 char limit */ + .init = centrino_cpu_init, + .exit = centrino_cpu_exit, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = centrino_target, + .get = get_cur_freq, + .attr = cpufreq_generic_attr, +}; + +/* + * This doesn't replace the detailed checks above because + * the generic CPU IDs don't have a way to match for steppings + * or ASCII model IDs. + */ +static const struct x86_cpu_id centrino_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, 9, X86_FEATURE_EST, NULL), + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, 13, X86_FEATURE_EST, NULL), + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 15, 3, X86_FEATURE_EST, NULL), + X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 15, 4, X86_FEATURE_EST, NULL), + {} +}; + +/** + * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver + * + * Initializes the Enhanced SpeedStep support. Returns -ENODEV on + * unsupported devices, -ENOENT if there's no voltage table for this + * particular CPU model, -EINVAL on problems during initiatization, + * and zero on success. + * + * This is quite picky. Not only does the CPU have to advertise the + * "est" flag in the cpuid capability flags, we look for a specific + * CPU model and stepping, and we need to have the exact model name in + * our voltage tables. That is, be paranoid about not releasing + * someone's valuable magic smoke. + */ +static int __init centrino_init(void) +{ + if (!x86_match_cpu(centrino_ids)) + return -ENODEV; + return cpufreq_register_driver(¢rino_driver); +} + +static void __exit centrino_exit(void) +{ + cpufreq_unregister_driver(¢rino_driver); +} + +MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); +MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); +MODULE_LICENSE ("GPL"); + +late_initcall(centrino_init); +module_exit(centrino_exit); diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c new file mode 100644 index 000000000..f2076d72b --- /dev/null +++ b/drivers/cpufreq/speedstep-ich.c @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2001 Dave Jones, Arjan van de ven. + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Based upon reverse engineered information, and on Intel documentation + * for chipsets ICH2-M and ICH3-M. + * + * Many thanks to Ducrot Bruno for finding and fixing the last + * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler + * for extensive testing. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + + +/********************************************************************* + * SPEEDSTEP - DEFINITIONS * + *********************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/sched.h> + +#include <asm/cpu_device_id.h> + +#include "speedstep-lib.h" + + +/* speedstep_chipset: + * It is necessary to know which chipset is used. As accesses to + * this device occur at various places in this module, we need a + * static struct pci_dev * pointing to that device. + */ +static struct pci_dev *speedstep_chipset_dev; + + +/* speedstep_processor + */ +static enum speedstep_processor speedstep_processor; + +static u32 pmbase; + +/* + * There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +static struct cpufreq_frequency_table speedstep_freqs[] = { + {0, SPEEDSTEP_HIGH, 0}, + {0, SPEEDSTEP_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + + +/** + * speedstep_find_register - read the PMBASE address + * + * Returns: -ENODEV if no register could be found + */ +static int speedstep_find_register(void) +{ + if (!speedstep_chipset_dev) + return -ENODEV; + + /* get PMBASE */ + pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); + if (!(pmbase & 0x01)) { + pr_err("could not find speedstep register\n"); + return -ENODEV; + } + + pmbase &= 0xFFFFFFFE; + if (!pmbase) { + pr_err("could not find speedstep register\n"); + return -ENODEV; + } + + pr_debug("pmbase is 0x%x\n", pmbase); + return 0; +} + +/** + * speedstep_set_state - set the SpeedStep state + * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + * Tries to change the SpeedStep state. Can be called from + * smp_call_function_single. + */ +static void speedstep_set_state(unsigned int state) +{ + u8 pm2_blk; + u8 value; + unsigned long flags; + + if (state > 0x1) + return; + + /* Disable IRQs */ + local_irq_save(flags); + + /* read state */ + value = inb(pmbase + 0x50); + + pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + /* write new state */ + value &= 0xFE; + value |= state; + + pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); + + /* Disable bus master arbitration */ + pm2_blk = inb(pmbase + 0x20); + pm2_blk |= 0x01; + outb(pm2_blk, (pmbase + 0x20)); + + /* Actual transition */ + outb(value, (pmbase + 0x50)); + + /* Restore bus master arbitration */ + pm2_blk &= 0xfe; + outb(pm2_blk, (pmbase + 0x20)); + + /* check if transition was successful */ + value = inb(pmbase + 0x50); + + /* Enable IRQs */ + local_irq_restore(flags); + + pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + if (state == (value & 0x1)) + pr_debug("change to %u MHz succeeded\n", + speedstep_get_frequency(speedstep_processor) / 1000); + else + pr_err("change failed - I/O error\n"); + + return; +} + +/* Wrapper for smp_call_function_single. */ +static void _speedstep_set_state(void *_state) +{ + speedstep_set_state(*(unsigned int *)_state); +} + +/** + * speedstep_activate - activate SpeedStep control in the chipset + * + * Tries to activate the SpeedStep status and control registers. + * Returns -EINVAL on an unsupported chipset, and zero on success. + */ +static int speedstep_activate(void) +{ + u16 value = 0; + + if (!speedstep_chipset_dev) + return -EINVAL; + + pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); + if (!(value & 0x08)) { + value |= 0x08; + pr_debug("activating SpeedStep (TM) registers\n"); + pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); + } + + return 0; +} + + +/** + * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic + * + * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to + * the LPC bridge / PM module which contains all power-management + * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected + * chipset, or zero on failure. + */ +static unsigned int speedstep_detect_chipset(void) +{ + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801DB_12, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 4; /* 4-M */ + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801CA_12, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 3; /* 3-M */ + + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801BA_10, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) { + /* speedstep.c causes lockups on Dell Inspirons 8000 and + * 8100 which use a pretty old revision of the 82815 + * host bridge. Abort on these systems. + */ + struct pci_dev *hostbridge; + + hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82815_MC, + PCI_ANY_ID, PCI_ANY_ID, + NULL); + + if (!hostbridge) + return 2; /* 2-M */ + + if (hostbridge->revision < 5) { + pr_debug("hostbridge does not support speedstep\n"); + speedstep_chipset_dev = NULL; + pci_dev_put(hostbridge); + return 0; + } + + pci_dev_put(hostbridge); + return 2; /* 2-M */ + } + + return 0; +} + +static void get_freq_data(void *_speed) +{ + unsigned int *speed = _speed; + + *speed = speedstep_get_frequency(speedstep_processor); +} + +static unsigned int speedstep_get(unsigned int cpu) +{ + unsigned int speed; + + /* You're supposed to ensure CPU is online. */ + BUG_ON(smp_call_function_single(cpu, get_freq_data, &speed, 1)); + + pr_debug("detected %u kHz as current frequency\n", speed); + return speed; +} + +/** + * speedstep_target - set a new CPUFreq policy + * @policy: new policy + * @index: index of target frequency + * + * Sets a new CPUFreq policy. + */ +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) +{ + unsigned int policy_cpu; + + policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); + + smp_call_function_single(policy_cpu, _speedstep_set_state, &index, + true); + + return 0; +} + + +struct get_freqs { + struct cpufreq_policy *policy; + int ret; +}; + +static void get_freqs_on_cpu(void *_get_freqs) +{ + struct get_freqs *get_freqs = _get_freqs; + + get_freqs->ret = + speedstep_get_freqs(speedstep_processor, + &speedstep_freqs[SPEEDSTEP_LOW].frequency, + &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + &get_freqs->policy->cpuinfo.transition_latency, + &speedstep_set_state); +} + +static int speedstep_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int policy_cpu; + struct get_freqs gf; + + /* only run on CPU to be set, or on its sibling */ +#ifdef CONFIG_SMP + cpumask_copy(policy->cpus, topology_sibling_cpumask(policy->cpu)); +#endif + policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); + + /* detect low and high frequency and transition latency */ + gf.policy = policy; + smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1); + if (gf.ret) + return gf.ret; + + policy->freq_table = speedstep_freqs; + + return 0; +} + + +static struct cpufreq_driver speedstep_driver = { + .name = "speedstep-ich", + .verify = cpufreq_generic_frequency_table_verify, + .target_index = speedstep_target, + .init = speedstep_cpu_init, + .get = speedstep_get, + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id ss_smi_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(INTEL, 6, 0x8, 0), + X86_MATCH_VENDOR_FAM_MODEL(INTEL, 6, 0xb, 0), + X86_MATCH_VENDOR_FAM_MODEL(INTEL, 15, 0x2, 0), + {} +}; + +/** + * speedstep_init - initializes the SpeedStep CPUFreq driver + * + * Initializes the SpeedStep support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init speedstep_init(void) +{ + if (!x86_match_cpu(ss_smi_ids)) + return -ENODEV; + + /* detect processor */ + speedstep_processor = speedstep_detect_processor(); + if (!speedstep_processor) { + pr_debug("Intel(R) SpeedStep(TM) capable processor " + "not found\n"); + return -ENODEV; + } + + /* detect chipset */ + if (!speedstep_detect_chipset()) { + pr_debug("Intel(R) SpeedStep(TM) for this chipset not " + "(yet) available.\n"); + return -ENODEV; + } + + /* activate speedstep support */ + if (speedstep_activate()) { + pci_dev_put(speedstep_chipset_dev); + return -EINVAL; + } + + if (speedstep_find_register()) + return -ENODEV; + + return cpufreq_register_driver(&speedstep_driver); +} + + +/** + * speedstep_exit - unregisters SpeedStep support + * + * Unregisters SpeedStep support. + */ +static void __exit speedstep_exit(void) +{ + pci_dev_put(speedstep_chipset_dev); + cpufreq_unregister_driver(&speedstep_driver); +} + + +MODULE_AUTHOR("Dave Jones, Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " + "with ICH-M southbridges."); +MODULE_LICENSE("GPL"); + +module_init(speedstep_init); +module_exit(speedstep_exit); diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c new file mode 100644 index 000000000..0b66df4ed --- /dev/null +++ b/drivers/cpufreq/speedstep-lib.c @@ -0,0 +1,479 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Library for common functions for Intel SpeedStep v.1 and v.2 support + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/tsc.h> +#include "speedstep-lib.h" + +#define PFX "speedstep-lib: " + +#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK +static int relaxed_check; +#else +#define relaxed_check 0 +#endif + +/********************************************************************* + * GET PROCESSOR CORE SPEED IN KHZ * + *********************************************************************/ + +static unsigned int pentium3_get_frequency(enum speedstep_processor processor) +{ + /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ + static const struct { + unsigned int ratio; /* Frequency Multiplier (x10) */ + u8 bitmap; /* power on configuration bits + [27, 25:22] (in MSR 0x2a) */ + } msr_decode_mult[] = { + { 30, 0x01 }, + { 35, 0x05 }, + { 40, 0x02 }, + { 45, 0x06 }, + { 50, 0x00 }, + { 55, 0x04 }, + { 60, 0x0b }, + { 65, 0x0f }, + { 70, 0x09 }, + { 75, 0x0d }, + { 80, 0x0a }, + { 85, 0x26 }, + { 90, 0x20 }, + { 100, 0x2b }, + { 0, 0xff } /* error or unknown value */ + }; + + /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ + static const struct { + unsigned int value; /* Front Side Bus speed in MHz */ + u8 bitmap; /* power on configuration bits [18: 19] + (in MSR 0x2a) */ + } msr_decode_fsb[] = { + { 66, 0x0 }, + { 100, 0x2 }, + { 133, 0x1 }, + { 0, 0xff} + }; + + u32 msr_lo, msr_tmp; + int i = 0, j = 0; + + /* read MSR 0x2a - we only need the low 32 bits */ + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + msr_tmp = msr_lo; + + /* decode the FSB */ + msr_tmp &= 0x00c0000; + msr_tmp >>= 18; + while (msr_tmp != msr_decode_fsb[i].bitmap) { + if (msr_decode_fsb[i].bitmap == 0xff) + return 0; + i++; + } + + /* decode the multiplier */ + if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { + pr_debug("workaround for early PIIIs\n"); + msr_lo &= 0x03c00000; + } else + msr_lo &= 0x0bc00000; + msr_lo >>= 22; + while (msr_lo != msr_decode_mult[j].bitmap) { + if (msr_decode_mult[j].bitmap == 0xff) + return 0; + j++; + } + + pr_debug("speed is %u\n", + (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); + + return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; +} + + +static unsigned int pentiumM_get_frequency(void) +{ + u32 msr_lo, msr_tmp; + + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + + /* see table B-2 of 24547212.pdf */ + if (msr_lo & 0x00040000) { + printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", + msr_lo, msr_tmp); + return 0; + } + + msr_tmp = (msr_lo >> 22) & 0x1f; + pr_debug("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * 100 * 1000)); + + return msr_tmp * 100 * 1000; +} + +static unsigned int pentium_core_get_frequency(void) +{ + u32 fsb = 0; + u32 msr_lo, msr_tmp; + int ret; + + rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); + /* see table B-2 of 25366920.pdf */ + switch (msr_lo & 0x07) { + case 5: + fsb = 100000; + break; + case 1: + fsb = 133333; + break; + case 3: + fsb = 166667; + break; + case 2: + fsb = 200000; + break; + case 0: + fsb = 266667; + break; + case 4: + fsb = 333333; + break; + default: + pr_err("PCORE - MSR_FSB_FREQ undefined value\n"); + } + + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", + msr_lo, msr_tmp); + + msr_tmp = (msr_lo >> 22) & 0x1f; + pr_debug("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * fsb)); + + ret = (msr_tmp * fsb); + return ret; +} + + +static unsigned int pentium4_get_frequency(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + u32 msr_lo, msr_hi, mult; + unsigned int fsb = 0; + unsigned int ret; + u8 fsb_code; + + /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency + * to System Bus Frequency Ratio Field in the Processor Frequency + * Configuration Register of the MSR. Therefore the current + * frequency cannot be calculated and has to be measured. + */ + if (c->x86_model < 2) + return cpu_khz; + + rdmsr(0x2c, msr_lo, msr_hi); + + pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); + + /* decode the FSB: see IA-32 Intel (C) Architecture Software + * Developer's Manual, Volume 3: System Prgramming Guide, + * revision #12 in Table B-1: MSRs in the Pentium 4 and + * Intel Xeon Processors, on page B-4 and B-5. + */ + fsb_code = (msr_lo >> 16) & 0x7; + switch (fsb_code) { + case 0: + fsb = 100 * 1000; + break; + case 1: + fsb = 13333 * 10; + break; + case 2: + fsb = 200 * 1000; + break; + } + + if (!fsb) + printk(KERN_DEBUG PFX "couldn't detect FSB speed. " + "Please send an e-mail to <linux@brodo.de>\n"); + + /* Multiplier. */ + mult = msr_lo >> 24; + + pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", + fsb, mult, (fsb * mult)); + + ret = (fsb * mult); + return ret; +} + + +/* Warning: may get called from smp_call_function_single. */ +unsigned int speedstep_get_frequency(enum speedstep_processor processor) +{ + switch (processor) { + case SPEEDSTEP_CPU_PCORE: + return pentium_core_get_frequency(); + case SPEEDSTEP_CPU_PM: + return pentiumM_get_frequency(); + case SPEEDSTEP_CPU_P4D: + case SPEEDSTEP_CPU_P4M: + return pentium4_get_frequency(); + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: + return pentium3_get_frequency(processor); + default: + return 0; + } + return 0; +} +EXPORT_SYMBOL_GPL(speedstep_get_frequency); + + +/********************************************************************* + * DETECT SPEEDSTEP-CAPABLE PROCESSOR * + *********************************************************************/ + +/* Keep in sync with the x86_cpu_id tables in the different modules */ +enum speedstep_processor speedstep_detect_processor(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + u32 ebx, msr_lo, msr_hi; + + pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model); + + if ((c->x86_vendor != X86_VENDOR_INTEL) || + ((c->x86 != 6) && (c->x86 != 0xF))) + return 0; + + if (c->x86 == 0xF) { + /* Intel Mobile Pentium 4-M + * or Intel Mobile Pentium 4 with 533 MHz FSB */ + if (c->x86_model != 2) + return 0; + + ebx = cpuid_ebx(0x00000001); + ebx &= 0x000000FF; + + pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping); + + switch (c->x86_stepping) { + case 4: + /* + * B-stepping [M-P4-M] + * sample has ebx = 0x0f, production has 0x0e. + */ + if ((ebx == 0x0e) || (ebx == 0x0f)) + return SPEEDSTEP_CPU_P4M; + break; + case 7: + /* + * C-stepping [M-P4-M] + * needs to have ebx=0x0e, else it's a celeron: + * cf. 25130917.pdf / page 7, footnote 5 even + * though 25072120.pdf / page 7 doesn't say + * samples are only of B-stepping... + */ + if (ebx == 0x0e) + return SPEEDSTEP_CPU_P4M; + break; + case 9: + /* + * D-stepping [M-P4-M or M-P4/533] + * + * this is totally strange: CPUID 0x0F29 is + * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. + * The latter need to be sorted out as they don't + * support speedstep. + * Celerons with CPUID 0x0F29 may have either + * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything + * specific. + * M-P4-Ms may have either ebx=0xe or 0xf [see above] + * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] + * also, M-P4M HTs have ebx=0x8, too + * For now, they are distinguished by the model_id + * string + */ + if ((ebx == 0x0e) || + (strstr(c->x86_model_id, + "Mobile Intel(R) Pentium(R) 4") != NULL)) + return SPEEDSTEP_CPU_P4M; + break; + default: + break; + } + return 0; + } + + switch (c->x86_model) { + case 0x0B: /* Intel PIII [Tualatin] */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, + * 0x06 for mobile PIII-M */ + ebx = cpuid_ebx(0x00000001); + pr_debug("ebx is %x\n", ebx); + + ebx &= 0x000000FF; + + if (ebx != 0x06) + return 0; + + /* So far all PIII-M processors support SpeedStep. See + * Intel's 24540640.pdf of June 2003 + */ + return SPEEDSTEP_CPU_PIII_T; + + case 0x08: /* Intel PIII [Coppermine] */ + + /* all mobile PIII Coppermines have FSB 100 MHz + * ==> sort out a few desktop PIIIs. */ + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); + pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", + msr_lo, msr_hi); + msr_lo &= 0x00c0000; + if (msr_lo != 0x0080000) + return 0; + + /* + * If the processor is a mobile version, + * platform ID has bit 50 set + * it has SpeedStep technology if either + * bit 56 or 57 is set + */ + rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); + pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", + msr_lo, msr_hi); + if ((msr_hi & (1<<18)) && + (relaxed_check ? 1 : (msr_hi & (3<<24)))) { + if (c->x86_stepping == 0x01) { + pr_debug("early PIII version\n"); + return SPEEDSTEP_CPU_PIII_C_EARLY; + } else + return SPEEDSTEP_CPU_PIII_C; + } + fallthrough; + default: + return 0; + } +} +EXPORT_SYMBOL_GPL(speedstep_detect_processor); + + +/********************************************************************* + * DETECT SPEEDSTEP SPEEDS * + *********************************************************************/ + +unsigned int speedstep_get_freqs(enum speedstep_processor processor, + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)) +{ + unsigned int prev_speed; + unsigned int ret = 0; + unsigned long flags; + ktime_t tv1, tv2; + + if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) + return -EINVAL; + + pr_debug("trying to determine both speeds\n"); + + /* get current speed */ + prev_speed = speedstep_get_frequency(processor); + if (!prev_speed) + return -EIO; + + pr_debug("previous speed is %u\n", prev_speed); + + preempt_disable(); + local_irq_save(flags); + + /* switch to low state */ + set_state(SPEEDSTEP_LOW); + *low_speed = speedstep_get_frequency(processor); + if (!*low_speed) { + ret = -EIO; + goto out; + } + + pr_debug("low speed is %u\n", *low_speed); + + /* start latency measurement */ + if (transition_latency) + tv1 = ktime_get(); + + /* switch to high state */ + set_state(SPEEDSTEP_HIGH); + + /* end latency measurement */ + if (transition_latency) + tv2 = ktime_get(); + + *high_speed = speedstep_get_frequency(processor); + if (!*high_speed) { + ret = -EIO; + goto out; + } + + pr_debug("high speed is %u\n", *high_speed); + + if (*low_speed == *high_speed) { + ret = -ENODEV; + goto out; + } + + /* switch to previous state, if necessary */ + if (*high_speed != prev_speed) + set_state(SPEEDSTEP_LOW); + + if (transition_latency) { + *transition_latency = ktime_to_us(ktime_sub(tv2, tv1)); + pr_debug("transition latency is %u uSec\n", *transition_latency); + + /* convert uSec to nSec and add 20% for safety reasons */ + *transition_latency *= 1200; + + /* check if the latency measurement is too high or too low + * and set it to a safe value (500uSec) in that case + */ + if (*transition_latency > 10000000 || + *transition_latency < 50000) { + pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n", + *transition_latency, 500000); + *transition_latency = 500000; + } + } + +out: + local_irq_restore(flags); + preempt_enable(); + + return ret; +} +EXPORT_SYMBOL_GPL(speedstep_get_freqs); + +#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK +module_param(relaxed_check, int, 0444); +MODULE_PARM_DESC(relaxed_check, + "Don't do all checks for speedstep capability."); +#endif + +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/speedstep-lib.h b/drivers/cpufreq/speedstep-lib.h new file mode 100644 index 000000000..dc762ea78 --- /dev/null +++ b/drivers/cpufreq/speedstep-lib.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Library for common functions for Intel SpeedStep v.1 and v.2 support + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + + + +/* processors */ +enum speedstep_processor { + SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */ + SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */ +/* the following processors are not speedstep-capable and are not auto-detected + * in speedstep_detect_processor(). However, their speed can be detected using + * the speedstep_get_frequency() call. */ + SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */ + SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */ + SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */ +}; + +/* speedstep states -- only two of them */ + +#define SPEEDSTEP_HIGH 0x00000000 +#define SPEEDSTEP_LOW 0x00000001 + + +/* detect a speedstep-capable processor */ +extern enum speedstep_processor speedstep_detect_processor(void); + +/* detect the current speed (in khz) of the processor */ +extern unsigned int speedstep_get_frequency(enum speedstep_processor processor); + + +/* detect the low and high speeds of the processor. The callback + * set_state"'s first argument is either SPEEDSTEP_HIGH or + * SPEEDSTEP_LOW; the second argument is zero so that no + * cpufreq_notify_transition calls are initiated. + */ +extern unsigned int speedstep_get_freqs(enum speedstep_processor processor, + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)); diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c new file mode 100644 index 000000000..0ce9d4b6d --- /dev/null +++ b/drivers/cpufreq/speedstep-smi.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel SpeedStep SMI driver. + * + * (C) 2003 Hiroshi Miura <miura@da-cha.org> + */ + + +/********************************************************************* + * SPEEDSTEP - DEFINITIONS * + *********************************************************************/ + +#define pr_fmt(fmt) "cpufreq: " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <asm/ist.h> +#include <asm/cpu_device_id.h> + +#include "speedstep-lib.h" + +/* speedstep system management interface port/command. + * + * These parameters are got from IST-SMI BIOS call. + * If user gives it, these are used. + * + */ +static int smi_port; +static int smi_cmd; +static unsigned int smi_sig; + +/* info about the processor */ +static enum speedstep_processor speedstep_processor; + +/* + * There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +static struct cpufreq_frequency_table speedstep_freqs[] = { + {0, SPEEDSTEP_HIGH, 0}, + {0, SPEEDSTEP_LOW, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +#define GET_SPEEDSTEP_OWNER 0 +#define GET_SPEEDSTEP_STATE 1 +#define SET_SPEEDSTEP_STATE 2 +#define GET_SPEEDSTEP_FREQS 4 + +/* how often shall the SMI call be tried if it failed, e.g. because + * of DMA activity going on? */ +#define SMI_TRIES 5 + +/** + * speedstep_smi_ownership + */ +static int speedstep_smi_ownership(void) +{ + u32 command, result, magic, dummy; + u32 function = GET_SPEEDSTEP_OWNER; + unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + magic = virt_to_phys(magic_data); + + pr_debug("trying to obtain ownership with command %x at port %x\n", + command, smi_port); + + __asm__ __volatile__( + "push %%ebp\n" + "out %%al, (%%dx)\n" + "pop %%ebp\n" + : "=D" (result), + "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), + "=S" (dummy) + : "a" (command), "b" (function), "c" (0), "d" (smi_port), + "D" (0), "S" (magic) + : "memory" + ); + + pr_debug("result is %x\n", result); + + return result; +} + +/** + * speedstep_smi_get_freqs - get SpeedStep preferred & current freq. + * @low: the low frequency value is placed here + * @high: the high frequency value is placed here + * + * Only available on later SpeedStep-enabled systems, returns false results or + * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing + * shows that the latter occurs if !(ist_info.event & 0xFFFF). + */ +static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) +{ + u32 command, result = 0, edi, high_mhz, low_mhz, dummy; + u32 state = 0; + u32 function = GET_SPEEDSTEP_FREQS; + + if (!(ist_info.event & 0xFFFF)) { + pr_debug("bug #1422 -- can't read freqs from BIOS\n"); + return -ENODEV; + } + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + + pr_debug("trying to determine frequencies with command %x at port %x\n", + command, smi_port); + + __asm__ __volatile__( + "push %%ebp\n" + "out %%al, (%%dx)\n" + "pop %%ebp" + : "=a" (result), + "=b" (high_mhz), + "=c" (low_mhz), + "=d" (state), "=D" (edi), "=S" (dummy) + : "a" (command), + "b" (function), + "c" (state), + "d" (smi_port), "S" (0), "D" (0) + ); + + pr_debug("result %x, low_freq %u, high_freq %u\n", + result, low_mhz, high_mhz); + + /* abort if results are obviously incorrect... */ + if ((high_mhz + low_mhz) < 600) + return -EINVAL; + + *high = high_mhz * 1000; + *low = low_mhz * 1000; + + return result; +} + +/** + * speedstep_set_state - set the SpeedStep state + * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + */ +static void speedstep_set_state(unsigned int state) +{ + unsigned int result = 0, command, new_state, dummy; + unsigned long flags; + unsigned int function = SET_SPEEDSTEP_STATE; + unsigned int retry = 0; + + if (state > 0x1) + return; + + /* Disable IRQs */ + preempt_disable(); + local_irq_save(flags); + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + + pr_debug("trying to set frequency to state %u " + "with command %x at port %x\n", + state, command, smi_port); + + do { + if (retry) { + /* + * We need to enable interrupts, otherwise the blockage + * won't resolve. + * + * We disable preemption so that other processes don't + * run. If other processes were running, they could + * submit more DMA requests, making the blockage worse. + */ + pr_debug("retry %u, previous result %u, waiting...\n", + retry, result); + local_irq_enable(); + mdelay(retry * 50); + local_irq_disable(); + } + retry++; + __asm__ __volatile__( + "push %%ebp\n" + "out %%al, (%%dx)\n" + "pop %%ebp" + : "=b" (new_state), "=D" (result), + "=c" (dummy), "=a" (dummy), + "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (state), + "d" (smi_port), "S" (0), "D" (0) + ); + } while ((new_state != state) && (retry <= SMI_TRIES)); + + /* enable IRQs */ + local_irq_restore(flags); + preempt_enable(); + + if (new_state == state) + pr_debug("change to %u MHz succeeded after %u tries " + "with result %u\n", + (speedstep_freqs[new_state].frequency / 1000), + retry, result); + else + pr_err("change to state %u failed with new_state %u and result %u\n", + state, new_state, result); + + return; +} + + +/** + * speedstep_target - set a new CPUFreq policy + * @policy: new policy + * @index: index of new freq + * + * Sets a new CPUFreq policy/freq. + */ +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) +{ + speedstep_set_state(index); + + return 0; +} + + +static int speedstep_cpu_init(struct cpufreq_policy *policy) +{ + int result; + unsigned int *low, *high; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + result = speedstep_smi_ownership(); + if (result) { + pr_debug("fails in acquiring ownership of a SMI interface.\n"); + return -EINVAL; + } + + /* detect low and high frequency */ + low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; + high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; + + result = speedstep_smi_get_freqs(low, high); + if (result) { + /* fall back to speedstep_lib.c dection mechanism: + * try both states out */ + pr_debug("could not detect low and high frequencies " + "by SMI call.\n"); + result = speedstep_get_freqs(speedstep_processor, + low, high, + NULL, + &speedstep_set_state); + + if (result) { + pr_debug("could not detect two different speeds" + " -- aborting.\n"); + return result; + } else + pr_debug("workaround worked.\n"); + } + + policy->freq_table = speedstep_freqs; + + return 0; +} + +static unsigned int speedstep_get(unsigned int cpu) +{ + if (cpu) + return -ENODEV; + return speedstep_get_frequency(speedstep_processor); +} + + +static int speedstep_resume(struct cpufreq_policy *policy) +{ + int result = speedstep_smi_ownership(); + + if (result) + pr_debug("fails in re-acquiring ownership of a SMI interface.\n"); + + return result; +} + +static struct cpufreq_driver speedstep_driver = { + .name = "speedstep-smi", + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = speedstep_target, + .init = speedstep_cpu_init, + .get = speedstep_get, + .resume = speedstep_resume, + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id ss_smi_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(INTEL, 6, 0x8, 0), + X86_MATCH_VENDOR_FAM_MODEL(INTEL, 6, 0xb, 0), + X86_MATCH_VENDOR_FAM_MODEL(INTEL, 15, 0x2, 0), + {} +}; + +/** + * speedstep_init - initializes the SpeedStep CPUFreq driver + * + * Initializes the SpeedStep support. Returns -ENODEV on unsupported + * BIOS, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init speedstep_init(void) +{ + if (!x86_match_cpu(ss_smi_ids)) + return -ENODEV; + + speedstep_processor = speedstep_detect_processor(); + + switch (speedstep_processor) { + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: + break; + default: + speedstep_processor = 0; + } + + if (!speedstep_processor) { + pr_debug("No supported Intel CPU detected.\n"); + return -ENODEV; + } + + pr_debug("signature:0x%.8x, command:0x%.8x, " + "event:0x%.8x, perf_level:0x%.8x.\n", + ist_info.signature, ist_info.command, + ist_info.event, ist_info.perf_level); + + /* Error if no IST-SMI BIOS or no PARM + sig= 'ISGE' aka 'Intel Speedstep Gate E' */ + if ((ist_info.signature != 0x47534943) && ( + (smi_port == 0) || (smi_cmd == 0))) + return -ENODEV; + + if (smi_sig == 1) + smi_sig = 0x47534943; + else + smi_sig = ist_info.signature; + + /* setup smi_port from MODLULE_PARM or BIOS */ + if ((smi_port > 0xff) || (smi_port < 0)) + return -EINVAL; + else if (smi_port == 0) + smi_port = ist_info.command & 0xff; + + if ((smi_cmd > 0xff) || (smi_cmd < 0)) + return -EINVAL; + else if (smi_cmd == 0) + smi_cmd = (ist_info.command >> 16) & 0xff; + + return cpufreq_register_driver(&speedstep_driver); +} + + +/** + * speedstep_exit - unregisters SpeedStep support + * + * Unregisters SpeedStep support. + */ +static void __exit speedstep_exit(void) +{ + cpufreq_unregister_driver(&speedstep_driver); +} + +module_param_hw(smi_port, int, ioport, 0444); +module_param(smi_cmd, int, 0444); +module_param(smi_sig, uint, 0444); + +MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " + "-- Intel's default setting is 0xb2"); +MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " + "-- Intel's default setting is 0x82"); +MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " + "SMI interface."); + +MODULE_AUTHOR("Hiroshi Miura"); +MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); +MODULE_LICENSE("GPL"); + +module_init(speedstep_init); +module_exit(speedstep_exit); diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c new file mode 100644 index 000000000..1a63aeea8 --- /dev/null +++ b/drivers/cpufreq/sti-cpufreq.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Match running platform with pre-defined OPP values for CPUFreq + * + * Author: Ajit Pal Singh <ajitpal.singh@st.com> + * Lee Jones <lee.jones@linaro.org> + * + * Copyright (C) 2015 STMicroelectronics (R&D) Limited + */ + +#include <linux/cpu.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/regmap.h> + +#define VERSION_ELEMENTS 3 +#define MAX_PCODE_NAME_LEN 7 + +#define VERSION_SHIFT 28 +#define HW_INFO_INDEX 1 +#define MAJOR_ID_INDEX 1 +#define MINOR_ID_INDEX 2 + +/* + * Only match on "suitable for ALL versions" entries + * + * This will be used with the BIT() macro. It sets the + * top bit of a 32bit value and is equal to 0x80000000. + */ +#define DEFAULT_VERSION 31 + +enum { + PCODE = 0, + SUBSTRATE, + DVFS_MAX_REGFIELDS, +}; + +/** + * struct sti_cpufreq_ddata - ST CPUFreq Driver Data + * + * @cpu: CPU's OF node + * @syscfg_eng: Engineering Syscon register map + * @syscfg: Syscon register map + */ +static struct sti_cpufreq_ddata { + struct device *cpu; + struct regmap *syscfg_eng; + struct regmap *syscfg; +} ddata; + +static int sti_cpufreq_fetch_major(void) { + struct device_node *np = ddata.cpu->of_node; + struct device *dev = ddata.cpu; + unsigned int major_offset; + unsigned int socid; + int ret; + + ret = of_property_read_u32_index(np, "st,syscfg", + MAJOR_ID_INDEX, &major_offset); + if (ret) { + dev_err(dev, "No major number offset provided in %pOF [%d]\n", + np, ret); + return ret; + } + + ret = regmap_read(ddata.syscfg, major_offset, &socid); + if (ret) { + dev_err(dev, "Failed to read major number from syscon [%d]\n", + ret); + return ret; + } + + return ((socid >> VERSION_SHIFT) & 0xf) + 1; +} + +static int sti_cpufreq_fetch_minor(void) +{ + struct device *dev = ddata.cpu; + struct device_node *np = dev->of_node; + unsigned int minor_offset; + unsigned int minid; + int ret; + + ret = of_property_read_u32_index(np, "st,syscfg-eng", + MINOR_ID_INDEX, &minor_offset); + if (ret) { + dev_err(dev, + "No minor number offset provided %pOF [%d]\n", + np, ret); + return ret; + } + + ret = regmap_read(ddata.syscfg_eng, minor_offset, &minid); + if (ret) { + dev_err(dev, + "Failed to read the minor number from syscon [%d]\n", + ret); + return ret; + } + + return minid & 0xf; +} + +static int sti_cpufreq_fetch_regmap_field(const struct reg_field *reg_fields, + int hw_info_offset, int field) +{ + struct regmap_field *regmap_field; + struct reg_field reg_field = reg_fields[field]; + struct device *dev = ddata.cpu; + unsigned int value; + int ret; + + reg_field.reg = hw_info_offset; + regmap_field = devm_regmap_field_alloc(dev, + ddata.syscfg_eng, + reg_field); + if (IS_ERR(regmap_field)) { + dev_err(dev, "Failed to allocate reg field\n"); + return PTR_ERR(regmap_field); + } + + ret = regmap_field_read(regmap_field, &value); + if (ret) { + dev_err(dev, "Failed to read %s code\n", + field ? "SUBSTRATE" : "PCODE"); + return ret; + } + + return value; +} + +static const struct reg_field sti_stih407_dvfs_regfields[DVFS_MAX_REGFIELDS] = { + [PCODE] = REG_FIELD(0, 16, 19), + [SUBSTRATE] = REG_FIELD(0, 0, 2), +}; + +static const struct reg_field *sti_cpufreq_match(void) +{ + if (of_machine_is_compatible("st,stih407") || + of_machine_is_compatible("st,stih410") || + of_machine_is_compatible("st,stih418")) + return sti_stih407_dvfs_regfields; + + return NULL; +} + +static int sti_cpufreq_set_opp_info(void) +{ + struct device *dev = ddata.cpu; + struct device_node *np = dev->of_node; + const struct reg_field *reg_fields; + unsigned int hw_info_offset; + unsigned int version[VERSION_ELEMENTS]; + int pcode, substrate, major, minor; + int opp_token, ret; + char name[MAX_PCODE_NAME_LEN]; + struct dev_pm_opp_config config = { + .supported_hw = version, + .supported_hw_count = ARRAY_SIZE(version), + .prop_name = name, + }; + + reg_fields = sti_cpufreq_match(); + if (!reg_fields) { + dev_err(dev, "This SoC doesn't support voltage scaling\n"); + return -ENODEV; + } + + ret = of_property_read_u32_index(np, "st,syscfg-eng", + HW_INFO_INDEX, &hw_info_offset); + if (ret) { + dev_warn(dev, "Failed to read HW info offset from DT\n"); + substrate = DEFAULT_VERSION; + pcode = 0; + goto use_defaults; + } + + pcode = sti_cpufreq_fetch_regmap_field(reg_fields, + hw_info_offset, + PCODE); + if (pcode < 0) { + dev_warn(dev, "Failed to obtain process code\n"); + /* Use default pcode */ + pcode = 0; + } + + substrate = sti_cpufreq_fetch_regmap_field(reg_fields, + hw_info_offset, + SUBSTRATE); + if (substrate) { + dev_warn(dev, "Failed to obtain substrate code\n"); + /* Use default substrate */ + substrate = DEFAULT_VERSION; + } + +use_defaults: + major = sti_cpufreq_fetch_major(); + if (major < 0) { + dev_err(dev, "Failed to obtain major version\n"); + /* Use default major number */ + major = DEFAULT_VERSION; + } + + minor = sti_cpufreq_fetch_minor(); + if (minor < 0) { + dev_err(dev, "Failed to obtain minor version\n"); + /* Use default minor number */ + minor = DEFAULT_VERSION; + } + + snprintf(name, MAX_PCODE_NAME_LEN, "pcode%d", pcode); + + version[0] = BIT(major); + version[1] = BIT(minor); + version[2] = BIT(substrate); + + opp_token = dev_pm_opp_set_config(dev, &config); + if (opp_token < 0) { + dev_err(dev, "Failed to set OPP config\n"); + return opp_token; + } + + dev_dbg(dev, "pcode: %d major: %d minor: %d substrate: %d\n", + pcode, major, minor, substrate); + dev_dbg(dev, "version[0]: %x version[1]: %x version[2]: %x\n", + version[0], version[1], version[2]); + + return 0; +} + +static int sti_cpufreq_fetch_syscon_registers(void) +{ + struct device *dev = ddata.cpu; + struct device_node *np = dev->of_node; + + ddata.syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(ddata.syscfg)) { + dev_err(dev, "\"st,syscfg\" not supplied\n"); + return PTR_ERR(ddata.syscfg); + } + + ddata.syscfg_eng = syscon_regmap_lookup_by_phandle(np, "st,syscfg-eng"); + if (IS_ERR(ddata.syscfg_eng)) { + dev_err(dev, "\"st,syscfg-eng\" not supplied\n"); + return PTR_ERR(ddata.syscfg_eng); + } + + return 0; +} + +static int __init sti_cpufreq_init(void) +{ + int ret; + + if ((!of_machine_is_compatible("st,stih407")) && + (!of_machine_is_compatible("st,stih410")) && + (!of_machine_is_compatible("st,stih418"))) + return -ENODEV; + + ddata.cpu = get_cpu_device(0); + if (!ddata.cpu) { + dev_err(ddata.cpu, "Failed to get device for CPU0\n"); + goto skip_voltage_scaling; + } + + if (!of_get_property(ddata.cpu->of_node, "operating-points-v2", NULL)) { + dev_err(ddata.cpu, "OPP-v2 not supported\n"); + goto skip_voltage_scaling; + } + + ret = sti_cpufreq_fetch_syscon_registers(); + if (ret) + goto skip_voltage_scaling; + + ret = sti_cpufreq_set_opp_info(); + if (!ret) + goto register_cpufreq_dt; + +skip_voltage_scaling: + dev_err(ddata.cpu, "Not doing voltage scaling\n"); + +register_cpufreq_dt: + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + + return 0; +} +module_init(sti_cpufreq_init); + +static const struct of_device_id __maybe_unused sti_cpufreq_of_match[] = { + { .compatible = "st,stih407" }, + { .compatible = "st,stih410" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sti_cpufreq_of_match); + +MODULE_DESCRIPTION("STMicroelectronics CPUFreq/OPP driver"); +MODULE_AUTHOR("Ajitpal Singh <ajitpal.singh@st.com>"); +MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c new file mode 100644 index 000000000..1583a370d --- /dev/null +++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Allwinner CPUFreq nvmem based driver + * + * The sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to + * provide the OPP framework with required information. + * + * Copyright (C) 2019 Yangtao Li <tiny.windzz@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> + +#define MAX_NAME_LEN 7 + +#define NVMEM_MASK 0x7 +#define NVMEM_SHIFT 5 + +static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev; + +/** + * sun50i_cpufreq_get_efuse() - Determine speed grade from efuse value + * @versions: Set to the value parsed from efuse + * + * Returns 0 if success. + */ +static int sun50i_cpufreq_get_efuse(u32 *versions) +{ + struct nvmem_cell *speedbin_nvmem; + struct device_node *np; + struct device *cpu_dev; + u32 *speedbin, efuse_value; + size_t len; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); + if (!np) + return -ENOENT; + + ret = of_device_is_compatible(np, + "allwinner,sun50i-h6-operating-points"); + if (!ret) { + of_node_put(np); + return -ENOENT; + } + + speedbin_nvmem = of_nvmem_cell_get(np, NULL); + of_node_put(np); + if (IS_ERR(speedbin_nvmem)) + return dev_err_probe(cpu_dev, PTR_ERR(speedbin_nvmem), + "Could not get nvmem cell\n"); + + speedbin = nvmem_cell_read(speedbin_nvmem, &len); + nvmem_cell_put(speedbin_nvmem); + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); + + efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK; + + /* + * We treat unexpected efuse values as if the SoC was from + * the slowest bin. Expected efuse values are 1-3, slowest + * to fastest. + */ + if (efuse_value >= 1 && efuse_value <= 3) + *versions = efuse_value - 1; + else + *versions = 0; + + kfree(speedbin); + return 0; +}; + +static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev) +{ + int *opp_tokens; + char name[MAX_NAME_LEN]; + unsigned int cpu; + u32 speed = 0; + int ret; + + opp_tokens = kcalloc(num_possible_cpus(), sizeof(*opp_tokens), + GFP_KERNEL); + if (!opp_tokens) + return -ENOMEM; + + ret = sun50i_cpufreq_get_efuse(&speed); + if (ret) { + kfree(opp_tokens); + return ret; + } + + snprintf(name, MAX_NAME_LEN, "speed%d", speed); + + for_each_possible_cpu(cpu) { + struct device *cpu_dev = get_cpu_device(cpu); + + if (!cpu_dev) { + ret = -ENODEV; + goto free_opp; + } + + opp_tokens[cpu] = dev_pm_opp_set_prop_name(cpu_dev, name); + if (opp_tokens[cpu] < 0) { + ret = opp_tokens[cpu]; + pr_err("Failed to set prop name\n"); + goto free_opp; + } + } + + cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, + NULL, 0); + if (!IS_ERR(cpufreq_dt_pdev)) { + platform_set_drvdata(pdev, opp_tokens); + return 0; + } + + ret = PTR_ERR(cpufreq_dt_pdev); + pr_err("Failed to register platform device\n"); + +free_opp: + for_each_possible_cpu(cpu) + dev_pm_opp_put_prop_name(opp_tokens[cpu]); + kfree(opp_tokens); + + return ret; +} + +static int sun50i_cpufreq_nvmem_remove(struct platform_device *pdev) +{ + int *opp_tokens = platform_get_drvdata(pdev); + unsigned int cpu; + + platform_device_unregister(cpufreq_dt_pdev); + + for_each_possible_cpu(cpu) + dev_pm_opp_put_prop_name(opp_tokens[cpu]); + + kfree(opp_tokens); + + return 0; +} + +static struct platform_driver sun50i_cpufreq_driver = { + .probe = sun50i_cpufreq_nvmem_probe, + .remove = sun50i_cpufreq_nvmem_remove, + .driver = { + .name = "sun50i-cpufreq-nvmem", + }, +}; + +static const struct of_device_id sun50i_cpufreq_match_list[] = { + { .compatible = "allwinner,sun50i-h6" }, + {} +}; +MODULE_DEVICE_TABLE(of, sun50i_cpufreq_match_list); + +static const struct of_device_id *sun50i_cpufreq_match_node(void) +{ + const struct of_device_id *match; + struct device_node *np; + + np = of_find_node_by_path("/"); + match = of_match_node(sun50i_cpufreq_match_list, np); + of_node_put(np); + + return match; +} + +/* + * Since the driver depends on nvmem drivers, which may return EPROBE_DEFER, + * all the real activity is done in the probe, which may be defered as well. + * The init here is only registering the driver and the platform device. + */ +static int __init sun50i_cpufreq_init(void) +{ + const struct of_device_id *match; + int ret; + + match = sun50i_cpufreq_match_node(); + if (!match) + return -ENODEV; + + ret = platform_driver_register(&sun50i_cpufreq_driver); + if (unlikely(ret < 0)) + return ret; + + sun50i_cpufreq_pdev = + platform_device_register_simple("sun50i-cpufreq-nvmem", + -1, NULL, 0); + ret = PTR_ERR_OR_ZERO(sun50i_cpufreq_pdev); + if (ret == 0) + return 0; + + platform_driver_unregister(&sun50i_cpufreq_driver); + return ret; +} +module_init(sun50i_cpufreq_init); + +static void __exit sun50i_cpufreq_exit(void) +{ + platform_device_unregister(sun50i_cpufreq_pdev); + platform_driver_unregister(&sun50i_cpufreq_driver); +} +module_exit(sun50i_cpufreq_exit); + +MODULE_DESCRIPTION("Sun50i-h6 cpufreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c new file mode 100644 index 000000000..7a1ea6fdc --- /dev/null +++ b/drivers/cpufreq/tegra124-cpufreq.c @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Tegra 124 cpufreq driver + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/types.h> + +struct tegra124_cpufreq_priv { + struct clk *cpu_clk; + struct clk *pllp_clk; + struct clk *pllx_clk; + struct clk *dfll_clk; + struct platform_device *cpufreq_dt_pdev; +}; + +static int tegra124_cpu_switch_to_dfll(struct tegra124_cpufreq_priv *priv) +{ + struct clk *orig_parent; + int ret; + + ret = clk_set_rate(priv->dfll_clk, clk_get_rate(priv->cpu_clk)); + if (ret) + return ret; + + orig_parent = clk_get_parent(priv->cpu_clk); + clk_set_parent(priv->cpu_clk, priv->pllp_clk); + + ret = clk_prepare_enable(priv->dfll_clk); + if (ret) + goto out; + + clk_set_parent(priv->cpu_clk, priv->dfll_clk); + + return 0; + +out: + clk_set_parent(priv->cpu_clk, orig_parent); + + return ret; +} + +static int tegra124_cpufreq_probe(struct platform_device *pdev) +{ + struct tegra124_cpufreq_priv *priv; + struct device_node *np; + struct device *cpu_dev; + struct platform_device_info cpufreq_dt_devinfo = {}; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = of_cpu_device_node_get(0); + if (!np) + return -ENODEV; + + priv->cpu_clk = of_clk_get_by_name(np, "cpu_g"); + if (IS_ERR(priv->cpu_clk)) { + ret = PTR_ERR(priv->cpu_clk); + goto out_put_np; + } + + priv->dfll_clk = of_clk_get_by_name(np, "dfll"); + if (IS_ERR(priv->dfll_clk)) { + ret = PTR_ERR(priv->dfll_clk); + goto out_put_cpu_clk; + } + + priv->pllx_clk = of_clk_get_by_name(np, "pll_x"); + if (IS_ERR(priv->pllx_clk)) { + ret = PTR_ERR(priv->pllx_clk); + goto out_put_dfll_clk; + } + + priv->pllp_clk = of_clk_get_by_name(np, "pll_p"); + if (IS_ERR(priv->pllp_clk)) { + ret = PTR_ERR(priv->pllp_clk); + goto out_put_pllx_clk; + } + + ret = tegra124_cpu_switch_to_dfll(priv); + if (ret) + goto out_put_pllp_clk; + + cpufreq_dt_devinfo.name = "cpufreq-dt"; + cpufreq_dt_devinfo.parent = &pdev->dev; + + priv->cpufreq_dt_pdev = + platform_device_register_full(&cpufreq_dt_devinfo); + if (IS_ERR(priv->cpufreq_dt_pdev)) { + ret = PTR_ERR(priv->cpufreq_dt_pdev); + goto out_put_pllp_clk; + } + + platform_set_drvdata(pdev, priv); + + of_node_put(np); + + return 0; + +out_put_pllp_clk: + clk_put(priv->pllp_clk); +out_put_pllx_clk: + clk_put(priv->pllx_clk); +out_put_dfll_clk: + clk_put(priv->dfll_clk); +out_put_cpu_clk: + clk_put(priv->cpu_clk); +out_put_np: + of_node_put(np); + + return ret; +} + +static int __maybe_unused tegra124_cpufreq_suspend(struct device *dev) +{ + struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev); + int err; + + /* + * PLLP rate 408Mhz is below the CPU Fmax at Vmin and is safe to + * use during suspend and resume. So, switch the CPU clock source + * to PLLP and disable DFLL. + */ + err = clk_set_parent(priv->cpu_clk, priv->pllp_clk); + if (err < 0) { + dev_err(dev, "failed to reparent to PLLP: %d\n", err); + return err; + } + + clk_disable_unprepare(priv->dfll_clk); + + return 0; +} + +static int __maybe_unused tegra124_cpufreq_resume(struct device *dev) +{ + struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev); + int err; + + /* + * Warmboot code powers up the CPU with PLLP clock source. + * Enable DFLL clock and switch CPU clock source back to DFLL. + */ + err = clk_prepare_enable(priv->dfll_clk); + if (err < 0) { + dev_err(dev, "failed to enable DFLL clock for CPU: %d\n", err); + goto disable_cpufreq; + } + + err = clk_set_parent(priv->cpu_clk, priv->dfll_clk); + if (err < 0) { + dev_err(dev, "failed to reparent to DFLL clock: %d\n", err); + goto disable_dfll; + } + + return 0; + +disable_dfll: + clk_disable_unprepare(priv->dfll_clk); +disable_cpufreq: + disable_cpufreq(); + + return err; +} + +static const struct dev_pm_ops tegra124_cpufreq_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(tegra124_cpufreq_suspend, + tegra124_cpufreq_resume) +}; + +static struct platform_driver tegra124_cpufreq_platdrv = { + .driver.name = "cpufreq-tegra124", + .driver.pm = &tegra124_cpufreq_pm_ops, + .probe = tegra124_cpufreq_probe, +}; + +static int __init tegra_cpufreq_init(void) +{ + int ret; + struct platform_device *pdev; + + if (!(of_machine_is_compatible("nvidia,tegra124") || + of_machine_is_compatible("nvidia,tegra210"))) + return -ENODEV; + + /* + * Platform driver+device required for handling EPROBE_DEFER with + * the regulator and the DFLL clock + */ + ret = platform_driver_register(&tegra124_cpufreq_platdrv); + if (ret) + return ret; + + pdev = platform_device_register_simple("cpufreq-tegra124", -1, NULL, 0); + if (IS_ERR(pdev)) { + platform_driver_unregister(&tegra124_cpufreq_platdrv); + return PTR_ERR(pdev); + } + + return 0; +} +module_init(tegra_cpufreq_init); + +MODULE_AUTHOR("Tuomas Tynkkynen <ttynkkynen@nvidia.com>"); +MODULE_DESCRIPTION("cpufreq driver for NVIDIA Tegra124"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/tegra186-cpufreq.c b/drivers/cpufreq/tegra186-cpufreq.c new file mode 100644 index 000000000..6c88827f4 --- /dev/null +++ b/drivers/cpufreq/tegra186-cpufreq.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2017, NVIDIA CORPORATION. All rights reserved + */ + +#include <linux/cpufreq.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include <soc/tegra/bpmp.h> +#include <soc/tegra/bpmp-abi.h> + +#define TEGRA186_NUM_CLUSTERS 2 +#define EDVD_OFFSET_A57(core) ((SZ_64K * 6) + (0x20 + (core) * 0x4)) +#define EDVD_OFFSET_DENVER(core) ((SZ_64K * 7) + (0x20 + (core) * 0x4)) +#define EDVD_CORE_VOLT_FREQ_F_SHIFT 0 +#define EDVD_CORE_VOLT_FREQ_F_MASK 0xffff +#define EDVD_CORE_VOLT_FREQ_V_SHIFT 16 + +struct tegra186_cpufreq_cpu { + unsigned int bpmp_cluster_id; + unsigned int edvd_offset; +}; + +static const struct tegra186_cpufreq_cpu tegra186_cpus[] = { + /* CPU0 - A57 Cluster */ + { + .bpmp_cluster_id = 1, + .edvd_offset = EDVD_OFFSET_A57(0) + }, + /* CPU1 - Denver Cluster */ + { + .bpmp_cluster_id = 0, + .edvd_offset = EDVD_OFFSET_DENVER(0) + }, + /* CPU2 - Denver Cluster */ + { + .bpmp_cluster_id = 0, + .edvd_offset = EDVD_OFFSET_DENVER(1) + }, + /* CPU3 - A57 Cluster */ + { + .bpmp_cluster_id = 1, + .edvd_offset = EDVD_OFFSET_A57(1) + }, + /* CPU4 - A57 Cluster */ + { + .bpmp_cluster_id = 1, + .edvd_offset = EDVD_OFFSET_A57(2) + }, + /* CPU5 - A57 Cluster */ + { + .bpmp_cluster_id = 1, + .edvd_offset = EDVD_OFFSET_A57(3) + }, +}; + +struct tegra186_cpufreq_cluster { + struct cpufreq_frequency_table *table; + u32 ref_clk_khz; + u32 div; +}; + +struct tegra186_cpufreq_data { + void __iomem *regs; + struct tegra186_cpufreq_cluster *clusters; + const struct tegra186_cpufreq_cpu *cpus; +}; + +static int tegra186_cpufreq_init(struct cpufreq_policy *policy) +{ + struct tegra186_cpufreq_data *data = cpufreq_get_driver_data(); + unsigned int cluster = data->cpus[policy->cpu].bpmp_cluster_id; + + policy->freq_table = data->clusters[cluster].table; + policy->cpuinfo.transition_latency = 300 * 1000; + policy->driver_data = NULL; + + return 0; +} + +static int tegra186_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct tegra186_cpufreq_data *data = cpufreq_get_driver_data(); + struct cpufreq_frequency_table *tbl = policy->freq_table + index; + unsigned int edvd_offset = data->cpus[policy->cpu].edvd_offset; + u32 edvd_val = tbl->driver_data; + + writel(edvd_val, data->regs + edvd_offset); + + return 0; +} + +static unsigned int tegra186_cpufreq_get(unsigned int cpu) +{ + struct tegra186_cpufreq_data *data = cpufreq_get_driver_data(); + struct tegra186_cpufreq_cluster *cluster; + struct cpufreq_policy *policy; + unsigned int edvd_offset, cluster_id; + u32 ndiv; + + policy = cpufreq_cpu_get(cpu); + if (!policy) + return 0; + + edvd_offset = data->cpus[policy->cpu].edvd_offset; + ndiv = readl(data->regs + edvd_offset) & EDVD_CORE_VOLT_FREQ_F_MASK; + cluster_id = data->cpus[policy->cpu].bpmp_cluster_id; + cluster = &data->clusters[cluster_id]; + cpufreq_cpu_put(policy); + + return (cluster->ref_clk_khz * ndiv) / cluster->div; +} + +static struct cpufreq_driver tegra186_cpufreq_driver = { + .name = "tegra186", + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .get = tegra186_cpufreq_get, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = tegra186_cpufreq_set_target, + .init = tegra186_cpufreq_init, + .attr = cpufreq_generic_attr, +}; + +static struct cpufreq_frequency_table *init_vhint_table( + struct platform_device *pdev, struct tegra_bpmp *bpmp, + struct tegra186_cpufreq_cluster *cluster, unsigned int cluster_id) +{ + struct cpufreq_frequency_table *table; + struct mrq_cpu_vhint_request req; + struct tegra_bpmp_message msg; + struct cpu_vhint_data *data; + int err, i, j, num_rates = 0; + dma_addr_t phys; + void *virt; + + virt = dma_alloc_coherent(bpmp->dev, sizeof(*data), &phys, + GFP_KERNEL); + if (!virt) + return ERR_PTR(-ENOMEM); + + data = (struct cpu_vhint_data *)virt; + + memset(&req, 0, sizeof(req)); + req.addr = phys; + req.cluster_id = cluster_id; + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_CPU_VHINT; + msg.tx.data = &req; + msg.tx.size = sizeof(req); + + err = tegra_bpmp_transfer(bpmp, &msg); + if (err) { + table = ERR_PTR(err); + goto free; + } + if (msg.rx.ret) { + table = ERR_PTR(-EINVAL); + goto free; + } + + for (i = data->vfloor; i <= data->vceil; i++) { + u16 ndiv = data->ndiv[i]; + + if (ndiv < data->ndiv_min || ndiv > data->ndiv_max) + continue; + + /* Only store lowest voltage index for each rate */ + if (i > 0 && ndiv == data->ndiv[i - 1]) + continue; + + num_rates++; + } + + table = devm_kcalloc(&pdev->dev, num_rates + 1, sizeof(*table), + GFP_KERNEL); + if (!table) { + table = ERR_PTR(-ENOMEM); + goto free; + } + + cluster->ref_clk_khz = data->ref_clk_hz / 1000; + cluster->div = data->pdiv * data->mdiv; + + for (i = data->vfloor, j = 0; i <= data->vceil; i++) { + struct cpufreq_frequency_table *point; + u16 ndiv = data->ndiv[i]; + u32 edvd_val = 0; + + if (ndiv < data->ndiv_min || ndiv > data->ndiv_max) + continue; + + /* Only store lowest voltage index for each rate */ + if (i > 0 && ndiv == data->ndiv[i - 1]) + continue; + + edvd_val |= i << EDVD_CORE_VOLT_FREQ_V_SHIFT; + edvd_val |= ndiv << EDVD_CORE_VOLT_FREQ_F_SHIFT; + + point = &table[j++]; + point->driver_data = edvd_val; + point->frequency = (cluster->ref_clk_khz * ndiv) / cluster->div; + } + + table[j].frequency = CPUFREQ_TABLE_END; + +free: + dma_free_coherent(bpmp->dev, sizeof(*data), virt, phys); + + return table; +} + +static int tegra186_cpufreq_probe(struct platform_device *pdev) +{ + struct tegra186_cpufreq_data *data; + struct tegra_bpmp *bpmp; + unsigned int i = 0, err; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->clusters = devm_kcalloc(&pdev->dev, TEGRA186_NUM_CLUSTERS, + sizeof(*data->clusters), GFP_KERNEL); + if (!data->clusters) + return -ENOMEM; + + data->cpus = tegra186_cpus; + + bpmp = tegra_bpmp_get(&pdev->dev); + if (IS_ERR(bpmp)) + return PTR_ERR(bpmp); + + data->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->regs)) { + err = PTR_ERR(data->regs); + goto put_bpmp; + } + + for (i = 0; i < TEGRA186_NUM_CLUSTERS; i++) { + struct tegra186_cpufreq_cluster *cluster = &data->clusters[i]; + + cluster->table = init_vhint_table(pdev, bpmp, cluster, i); + if (IS_ERR(cluster->table)) { + err = PTR_ERR(cluster->table); + goto put_bpmp; + } + } + + tegra186_cpufreq_driver.driver_data = data; + + err = cpufreq_register_driver(&tegra186_cpufreq_driver); + +put_bpmp: + tegra_bpmp_put(bpmp); + + return err; +} + +static int tegra186_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&tegra186_cpufreq_driver); + + return 0; +} + +static const struct of_device_id tegra186_cpufreq_of_match[] = { + { .compatible = "nvidia,tegra186-ccplex-cluster", }, + { } +}; +MODULE_DEVICE_TABLE(of, tegra186_cpufreq_of_match); + +static struct platform_driver tegra186_cpufreq_platform_driver = { + .driver = { + .name = "tegra186-cpufreq", + .of_match_table = tegra186_cpufreq_of_match, + }, + .probe = tegra186_cpufreq_probe, + .remove = tegra186_cpufreq_remove, +}; +module_platform_driver(tegra186_cpufreq_platform_driver); + +MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>"); +MODULE_DESCRIPTION("NVIDIA Tegra186 cpufreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c new file mode 100644 index 000000000..4596c3e32 --- /dev/null +++ b/drivers/cpufreq/tegra194-cpufreq.c @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 - 2022, NVIDIA CORPORATION. All rights reserved + */ + +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/smp_plat.h> + +#include <soc/tegra/bpmp.h> +#include <soc/tegra/bpmp-abi.h> + +#define KHZ 1000 +#define REF_CLK_MHZ 408 /* 408 MHz */ +#define US_DELAY 500 +#define CPUFREQ_TBL_STEP_HZ (50 * KHZ * KHZ) +#define MAX_CNT ~0U + +#define NDIV_MASK 0x1FF + +#define CORE_OFFSET(cpu) (cpu * 8) +#define CMU_CLKS_BASE 0x2000 +#define SCRATCH_FREQ_CORE_REG(data, cpu) (data->regs + CMU_CLKS_BASE + CORE_OFFSET(cpu)) + +#define MMCRAB_CLUSTER_BASE(cl) (0x30000 + (cl * 0x10000)) +#define CLUSTER_ACTMON_BASE(data, cl) \ + (data->regs + (MMCRAB_CLUSTER_BASE(cl) + data->soc->actmon_cntr_base)) +#define CORE_ACTMON_CNTR_REG(data, cl, cpu) (CLUSTER_ACTMON_BASE(data, cl) + CORE_OFFSET(cpu)) + +/* cpufreq transisition latency */ +#define TEGRA_CPUFREQ_TRANSITION_LATENCY (300 * 1000) /* unit in nanoseconds */ + +struct tegra_cpu_ctr { + u32 cpu; + u32 coreclk_cnt, last_coreclk_cnt; + u32 refclk_cnt, last_refclk_cnt; +}; + +struct read_counters_work { + struct work_struct work; + struct tegra_cpu_ctr c; +}; + +struct tegra_cpufreq_ops { + void (*read_counters)(struct tegra_cpu_ctr *c); + void (*set_cpu_ndiv)(struct cpufreq_policy *policy, u64 ndiv); + void (*get_cpu_cluster_id)(u32 cpu, u32 *cpuid, u32 *clusterid); + int (*get_cpu_ndiv)(u32 cpu, u32 cpuid, u32 clusterid, u64 *ndiv); +}; + +struct tegra_cpufreq_soc { + struct tegra_cpufreq_ops *ops; + int maxcpus_per_cluster; + unsigned int num_clusters; + phys_addr_t actmon_cntr_base; +}; + +struct tegra194_cpufreq_data { + void __iomem *regs; + struct cpufreq_frequency_table **tables; + const struct tegra_cpufreq_soc *soc; +}; + +static struct workqueue_struct *read_counters_wq; + +static void tegra_get_cpu_mpidr(void *mpidr) +{ + *((u64 *)mpidr) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK; +} + +static void tegra234_get_cpu_cluster_id(u32 cpu, u32 *cpuid, u32 *clusterid) +{ + u64 mpidr; + + smp_call_function_single(cpu, tegra_get_cpu_mpidr, &mpidr, true); + + if (cpuid) + *cpuid = MPIDR_AFFINITY_LEVEL(mpidr, 1); + if (clusterid) + *clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 2); +} + +static int tegra234_get_cpu_ndiv(u32 cpu, u32 cpuid, u32 clusterid, u64 *ndiv) +{ + struct tegra194_cpufreq_data *data = cpufreq_get_driver_data(); + void __iomem *freq_core_reg; + u64 mpidr_id; + + /* use physical id to get address of per core frequency register */ + mpidr_id = (clusterid * data->soc->maxcpus_per_cluster) + cpuid; + freq_core_reg = SCRATCH_FREQ_CORE_REG(data, mpidr_id); + + *ndiv = readl(freq_core_reg) & NDIV_MASK; + + return 0; +} + +static void tegra234_set_cpu_ndiv(struct cpufreq_policy *policy, u64 ndiv) +{ + struct tegra194_cpufreq_data *data = cpufreq_get_driver_data(); + void __iomem *freq_core_reg; + u32 cpu, cpuid, clusterid; + u64 mpidr_id; + + for_each_cpu_and(cpu, policy->cpus, cpu_online_mask) { + data->soc->ops->get_cpu_cluster_id(cpu, &cpuid, &clusterid); + + /* use physical id to get address of per core frequency register */ + mpidr_id = (clusterid * data->soc->maxcpus_per_cluster) + cpuid; + freq_core_reg = SCRATCH_FREQ_CORE_REG(data, mpidr_id); + + writel(ndiv, freq_core_reg); + } +} + +/* + * This register provides access to two counter values with a single + * 64-bit read. The counter values are used to determine the average + * actual frequency a core has run at over a period of time. + * [63:32] PLLP counter: Counts at fixed frequency (408 MHz) + * [31:0] Core clock counter: Counts on every core clock cycle + */ +static void tegra234_read_counters(struct tegra_cpu_ctr *c) +{ + struct tegra194_cpufreq_data *data = cpufreq_get_driver_data(); + void __iomem *actmon_reg; + u32 cpuid, clusterid; + u64 val; + + data->soc->ops->get_cpu_cluster_id(c->cpu, &cpuid, &clusterid); + actmon_reg = CORE_ACTMON_CNTR_REG(data, clusterid, cpuid); + + val = readq(actmon_reg); + c->last_refclk_cnt = upper_32_bits(val); + c->last_coreclk_cnt = lower_32_bits(val); + udelay(US_DELAY); + val = readq(actmon_reg); + c->refclk_cnt = upper_32_bits(val); + c->coreclk_cnt = lower_32_bits(val); +} + +static struct tegra_cpufreq_ops tegra234_cpufreq_ops = { + .read_counters = tegra234_read_counters, + .get_cpu_cluster_id = tegra234_get_cpu_cluster_id, + .get_cpu_ndiv = tegra234_get_cpu_ndiv, + .set_cpu_ndiv = tegra234_set_cpu_ndiv, +}; + +static const struct tegra_cpufreq_soc tegra234_cpufreq_soc = { + .ops = &tegra234_cpufreq_ops, + .actmon_cntr_base = 0x9000, + .maxcpus_per_cluster = 4, + .num_clusters = 3, +}; + +static const struct tegra_cpufreq_soc tegra239_cpufreq_soc = { + .ops = &tegra234_cpufreq_ops, + .actmon_cntr_base = 0x4000, + .maxcpus_per_cluster = 8, + .num_clusters = 1, +}; + +static void tegra194_get_cpu_cluster_id(u32 cpu, u32 *cpuid, u32 *clusterid) +{ + u64 mpidr; + + smp_call_function_single(cpu, tegra_get_cpu_mpidr, &mpidr, true); + + if (cpuid) + *cpuid = MPIDR_AFFINITY_LEVEL(mpidr, 0); + if (clusterid) + *clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1); +} + +/* + * Read per-core Read-only system register NVFREQ_FEEDBACK_EL1. + * The register provides frequency feedback information to + * determine the average actual frequency a core has run at over + * a period of time. + * [31:0] PLLP counter: Counts at fixed frequency (408 MHz) + * [63:32] Core clock counter: counts on every core clock cycle + * where the core is architecturally clocking + */ +static u64 read_freq_feedback(void) +{ + u64 val = 0; + + asm volatile("mrs %0, s3_0_c15_c0_5" : "=r" (val) : ); + + return val; +} + +static inline u32 map_ndiv_to_freq(struct mrq_cpu_ndiv_limits_response + *nltbl, u16 ndiv) +{ + return nltbl->ref_clk_hz / KHZ * ndiv / (nltbl->pdiv * nltbl->mdiv); +} + +static void tegra194_read_counters(struct tegra_cpu_ctr *c) +{ + u64 val; + + val = read_freq_feedback(); + c->last_refclk_cnt = lower_32_bits(val); + c->last_coreclk_cnt = upper_32_bits(val); + udelay(US_DELAY); + val = read_freq_feedback(); + c->refclk_cnt = lower_32_bits(val); + c->coreclk_cnt = upper_32_bits(val); +} + +static void tegra_read_counters(struct work_struct *work) +{ + struct tegra194_cpufreq_data *data = cpufreq_get_driver_data(); + struct read_counters_work *read_counters_work; + struct tegra_cpu_ctr *c; + + /* + * ref_clk_counter(32 bit counter) runs on constant clk, + * pll_p(408MHz). + * It will take = 2 ^ 32 / 408 MHz to overflow ref clk counter + * = 10526880 usec = 10.527 sec to overflow + * + * Like wise core_clk_counter(32 bit counter) runs on core clock. + * It's synchronized to crab_clk (cpu_crab_clk) which runs at + * freq of cluster. Assuming max cluster clock ~2000MHz, + * It will take = 2 ^ 32 / 2000 MHz to overflow core clk counter + * = ~2.147 sec to overflow + */ + read_counters_work = container_of(work, struct read_counters_work, + work); + c = &read_counters_work->c; + + data->soc->ops->read_counters(c); +} + +/* + * Return instantaneous cpu speed + * Instantaneous freq is calculated as - + * -Takes sample on every query of getting the freq. + * - Read core and ref clock counters; + * - Delay for X us + * - Read above cycle counters again + * - Calculates freq by subtracting current and previous counters + * divided by the delay time or eqv. of ref_clk_counter in delta time + * - Return Kcycles/second, freq in KHz + * + * delta time period = x sec + * = delta ref_clk_counter / (408 * 10^6) sec + * freq in Hz = cycles/sec + * = (delta cycles / x sec + * = (delta cycles * 408 * 10^6) / delta ref_clk_counter + * in KHz = (delta cycles * 408 * 10^3) / delta ref_clk_counter + * + * @cpu - logical cpu whose freq to be updated + * Returns freq in KHz on success, 0 if cpu is offline + */ +static unsigned int tegra194_calculate_speed(u32 cpu) +{ + struct read_counters_work read_counters_work; + struct tegra_cpu_ctr c; + u32 delta_refcnt; + u32 delta_ccnt; + u32 rate_mhz; + + /* + * udelay() is required to reconstruct cpu frequency over an + * observation window. Using workqueue to call udelay() with + * interrupts enabled. + */ + read_counters_work.c.cpu = cpu; + INIT_WORK_ONSTACK(&read_counters_work.work, tegra_read_counters); + queue_work_on(cpu, read_counters_wq, &read_counters_work.work); + flush_work(&read_counters_work.work); + c = read_counters_work.c; + + if (c.coreclk_cnt < c.last_coreclk_cnt) + delta_ccnt = c.coreclk_cnt + (MAX_CNT - c.last_coreclk_cnt); + else + delta_ccnt = c.coreclk_cnt - c.last_coreclk_cnt; + if (!delta_ccnt) + return 0; + + /* ref clock is 32 bits */ + if (c.refclk_cnt < c.last_refclk_cnt) + delta_refcnt = c.refclk_cnt + (MAX_CNT - c.last_refclk_cnt); + else + delta_refcnt = c.refclk_cnt - c.last_refclk_cnt; + if (!delta_refcnt) { + pr_debug("cpufreq: %d is idle, delta_refcnt: 0\n", cpu); + return 0; + } + rate_mhz = ((unsigned long)(delta_ccnt * REF_CLK_MHZ)) / delta_refcnt; + + return (rate_mhz * KHZ); /* in KHz */ +} + +static void tegra194_get_cpu_ndiv_sysreg(void *ndiv) +{ + u64 ndiv_val; + + asm volatile("mrs %0, s3_0_c15_c0_4" : "=r" (ndiv_val) : ); + + *(u64 *)ndiv = ndiv_val; +} + +static int tegra194_get_cpu_ndiv(u32 cpu, u32 cpuid, u32 clusterid, u64 *ndiv) +{ + return smp_call_function_single(cpu, tegra194_get_cpu_ndiv_sysreg, &ndiv, true); +} + +static void tegra194_set_cpu_ndiv_sysreg(void *data) +{ + u64 ndiv_val = *(u64 *)data; + + asm volatile("msr s3_0_c15_c0_4, %0" : : "r" (ndiv_val)); +} + +static void tegra194_set_cpu_ndiv(struct cpufreq_policy *policy, u64 ndiv) +{ + on_each_cpu_mask(policy->cpus, tegra194_set_cpu_ndiv_sysreg, &ndiv, true); +} + +static unsigned int tegra194_get_speed(u32 cpu) +{ + struct tegra194_cpufreq_data *data = cpufreq_get_driver_data(); + struct cpufreq_frequency_table *pos; + u32 cpuid, clusterid; + unsigned int rate; + u64 ndiv; + int ret; + + data->soc->ops->get_cpu_cluster_id(cpu, &cpuid, &clusterid); + + /* reconstruct actual cpu freq using counters */ + rate = tegra194_calculate_speed(cpu); + + /* get last written ndiv value */ + ret = data->soc->ops->get_cpu_ndiv(cpu, cpuid, clusterid, &ndiv); + if (WARN_ON_ONCE(ret)) + return rate; + + /* + * If the reconstructed frequency has acceptable delta from + * the last written value, then return freq corresponding + * to the last written ndiv value from freq_table. This is + * done to return consistent value. + */ + cpufreq_for_each_valid_entry(pos, data->tables[clusterid]) { + if (pos->driver_data != ndiv) + continue; + + if (abs(pos->frequency - rate) > 115200) { + pr_warn("cpufreq: cpu%d,cur:%u,set:%u,set ndiv:%llu\n", + cpu, rate, pos->frequency, ndiv); + } else { + rate = pos->frequency; + } + break; + } + return rate; +} + +static int tegra194_cpufreq_init(struct cpufreq_policy *policy) +{ + struct tegra194_cpufreq_data *data = cpufreq_get_driver_data(); + int maxcpus_per_cluster = data->soc->maxcpus_per_cluster; + u32 start_cpu, cpu; + u32 clusterid; + + data->soc->ops->get_cpu_cluster_id(policy->cpu, NULL, &clusterid); + + if (clusterid >= data->soc->num_clusters || !data->tables[clusterid]) + return -EINVAL; + + start_cpu = rounddown(policy->cpu, maxcpus_per_cluster); + /* set same policy for all cpus in a cluster */ + for (cpu = start_cpu; cpu < (start_cpu + maxcpus_per_cluster); cpu++) { + if (cpu_possible(cpu)) + cpumask_set_cpu(cpu, policy->cpus); + } + policy->freq_table = data->tables[clusterid]; + policy->cpuinfo.transition_latency = TEGRA_CPUFREQ_TRANSITION_LATENCY; + + return 0; +} + +static int tegra194_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct cpufreq_frequency_table *tbl = policy->freq_table + index; + struct tegra194_cpufreq_data *data = cpufreq_get_driver_data(); + + /* + * Each core writes frequency in per core register. Then both cores + * in a cluster run at same frequency which is the maximum frequency + * request out of the values requested by both cores in that cluster. + */ + data->soc->ops->set_cpu_ndiv(policy, (u64)tbl->driver_data); + + return 0; +} + +static struct cpufreq_driver tegra194_cpufreq_driver = { + .name = "tegra194", + .flags = CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = tegra194_cpufreq_set_target, + .get = tegra194_get_speed, + .init = tegra194_cpufreq_init, + .attr = cpufreq_generic_attr, +}; + +static struct tegra_cpufreq_ops tegra194_cpufreq_ops = { + .read_counters = tegra194_read_counters, + .get_cpu_cluster_id = tegra194_get_cpu_cluster_id, + .get_cpu_ndiv = tegra194_get_cpu_ndiv, + .set_cpu_ndiv = tegra194_set_cpu_ndiv, +}; + +static const struct tegra_cpufreq_soc tegra194_cpufreq_soc = { + .ops = &tegra194_cpufreq_ops, + .maxcpus_per_cluster = 2, + .num_clusters = 4, +}; + +static void tegra194_cpufreq_free_resources(void) +{ + destroy_workqueue(read_counters_wq); +} + +static struct cpufreq_frequency_table * +init_freq_table(struct platform_device *pdev, struct tegra_bpmp *bpmp, + unsigned int cluster_id) +{ + struct cpufreq_frequency_table *freq_table; + struct mrq_cpu_ndiv_limits_response resp; + unsigned int num_freqs, ndiv, delta_ndiv; + struct mrq_cpu_ndiv_limits_request req; + struct tegra_bpmp_message msg; + u16 freq_table_step_size; + int err, index; + + memset(&req, 0, sizeof(req)); + req.cluster_id = cluster_id; + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_CPU_NDIV_LIMITS; + msg.tx.data = &req; + msg.tx.size = sizeof(req); + msg.rx.data = &resp; + msg.rx.size = sizeof(resp); + + err = tegra_bpmp_transfer(bpmp, &msg); + if (err) + return ERR_PTR(err); + if (msg.rx.ret == -BPMP_EINVAL) { + /* Cluster not available */ + return NULL; + } + if (msg.rx.ret) + return ERR_PTR(-EINVAL); + + /* + * Make sure frequency table step is a multiple of mdiv to match + * vhint table granularity. + */ + freq_table_step_size = resp.mdiv * + DIV_ROUND_UP(CPUFREQ_TBL_STEP_HZ, resp.ref_clk_hz); + + dev_dbg(&pdev->dev, "cluster %d: frequency table step size: %d\n", + cluster_id, freq_table_step_size); + + delta_ndiv = resp.ndiv_max - resp.ndiv_min; + + if (unlikely(delta_ndiv == 0)) { + num_freqs = 1; + } else { + /* We store both ndiv_min and ndiv_max hence the +1 */ + num_freqs = delta_ndiv / freq_table_step_size + 1; + } + + num_freqs += (delta_ndiv % freq_table_step_size) ? 1 : 0; + + freq_table = devm_kcalloc(&pdev->dev, num_freqs + 1, + sizeof(*freq_table), GFP_KERNEL); + if (!freq_table) + return ERR_PTR(-ENOMEM); + + for (index = 0, ndiv = resp.ndiv_min; + ndiv < resp.ndiv_max; + index++, ndiv += freq_table_step_size) { + freq_table[index].driver_data = ndiv; + freq_table[index].frequency = map_ndiv_to_freq(&resp, ndiv); + } + + freq_table[index].driver_data = resp.ndiv_max; + freq_table[index++].frequency = map_ndiv_to_freq(&resp, resp.ndiv_max); + freq_table[index].frequency = CPUFREQ_TABLE_END; + + return freq_table; +} + +static int tegra194_cpufreq_probe(struct platform_device *pdev) +{ + const struct tegra_cpufreq_soc *soc; + struct tegra194_cpufreq_data *data; + struct tegra_bpmp *bpmp; + int err, i; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + soc = of_device_get_match_data(&pdev->dev); + + if (soc->ops && soc->maxcpus_per_cluster && soc->num_clusters) { + data->soc = soc; + } else { + dev_err(&pdev->dev, "soc data missing\n"); + return -EINVAL; + } + + data->tables = devm_kcalloc(&pdev->dev, data->soc->num_clusters, + sizeof(*data->tables), GFP_KERNEL); + if (!data->tables) + return -ENOMEM; + + if (soc->actmon_cntr_base) { + /* mmio registers are used for frequency request and re-construction */ + data->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->regs)) + return PTR_ERR(data->regs); + } + + platform_set_drvdata(pdev, data); + + bpmp = tegra_bpmp_get(&pdev->dev); + if (IS_ERR(bpmp)) + return PTR_ERR(bpmp); + + read_counters_wq = alloc_workqueue("read_counters_wq", __WQ_LEGACY, 1); + if (!read_counters_wq) { + dev_err(&pdev->dev, "fail to create_workqueue\n"); + err = -EINVAL; + goto put_bpmp; + } + + for (i = 0; i < data->soc->num_clusters; i++) { + data->tables[i] = init_freq_table(pdev, bpmp, i); + if (IS_ERR(data->tables[i])) { + err = PTR_ERR(data->tables[i]); + goto err_free_res; + } + } + + tegra194_cpufreq_driver.driver_data = data; + + err = cpufreq_register_driver(&tegra194_cpufreq_driver); + if (!err) + goto put_bpmp; + +err_free_res: + tegra194_cpufreq_free_resources(); +put_bpmp: + tegra_bpmp_put(bpmp); + return err; +} + +static int tegra194_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&tegra194_cpufreq_driver); + tegra194_cpufreq_free_resources(); + + return 0; +} + +static const struct of_device_id tegra194_cpufreq_of_match[] = { + { .compatible = "nvidia,tegra194-ccplex", .data = &tegra194_cpufreq_soc }, + { .compatible = "nvidia,tegra234-ccplex-cluster", .data = &tegra234_cpufreq_soc }, + { .compatible = "nvidia,tegra239-ccplex-cluster", .data = &tegra239_cpufreq_soc }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, tegra194_cpufreq_of_match); + +static struct platform_driver tegra194_ccplex_driver = { + .driver = { + .name = "tegra194-cpufreq", + .of_match_table = tegra194_cpufreq_of_match, + }, + .probe = tegra194_cpufreq_probe, + .remove = tegra194_cpufreq_remove, +}; +module_platform_driver(tegra194_ccplex_driver); + +MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>"); +MODULE_AUTHOR("Sumit Gupta <sumitg@nvidia.com>"); +MODULE_DESCRIPTION("NVIDIA Tegra194 cpufreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c new file mode 100644 index 000000000..dfd2de4f8 --- /dev/null +++ b/drivers/cpufreq/tegra20-cpufreq.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@google.com> + * Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation + */ + +#include <linux/bits.h> +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/types.h> + +#include <soc/tegra/common.h> +#include <soc/tegra/fuse.h> + +static bool cpu0_node_has_opp_v2_prop(void) +{ + struct device_node *np = of_cpu_device_node_get(0); + bool ret = false; + + if (of_property_present(np, "operating-points-v2")) + ret = true; + + of_node_put(np); + return ret; +} + +static void tegra20_cpufreq_put_supported_hw(void *opp_token) +{ + dev_pm_opp_put_supported_hw((unsigned long) opp_token); +} + +static void tegra20_cpufreq_dt_unregister(void *cpufreq_dt) +{ + platform_device_unregister(cpufreq_dt); +} + +static int tegra20_cpufreq_probe(struct platform_device *pdev) +{ + struct platform_device *cpufreq_dt; + struct device *cpu_dev; + u32 versions[2]; + int err; + + if (!cpu0_node_has_opp_v2_prop()) { + dev_err(&pdev->dev, "operating points not found\n"); + dev_err(&pdev->dev, "please update your device tree\n"); + return -ENODEV; + } + + if (of_machine_is_compatible("nvidia,tegra20")) { + versions[0] = BIT(tegra_sku_info.cpu_process_id); + versions[1] = BIT(tegra_sku_info.soc_speedo_id); + } else { + versions[0] = BIT(tegra_sku_info.cpu_process_id); + versions[1] = BIT(tegra_sku_info.cpu_speedo_id); + } + + dev_info(&pdev->dev, "hardware version 0x%x 0x%x\n", + versions[0], versions[1]); + + cpu_dev = get_cpu_device(0); + if (WARN_ON(!cpu_dev)) + return -ENODEV; + + err = dev_pm_opp_set_supported_hw(cpu_dev, versions, 2); + if (err < 0) { + dev_err(&pdev->dev, "failed to set supported hw: %d\n", err); + return err; + } + + err = devm_add_action_or_reset(&pdev->dev, + tegra20_cpufreq_put_supported_hw, + (void *)((unsigned long) err)); + if (err) + return err; + + cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + err = PTR_ERR_OR_ZERO(cpufreq_dt); + if (err) { + dev_err(&pdev->dev, + "failed to create cpufreq-dt device: %d\n", err); + return err; + } + + err = devm_add_action_or_reset(&pdev->dev, + tegra20_cpufreq_dt_unregister, + cpufreq_dt); + if (err) + return err; + + return 0; +} + +static struct platform_driver tegra20_cpufreq_driver = { + .probe = tegra20_cpufreq_probe, + .driver = { + .name = "tegra20-cpufreq", + }, +}; +module_platform_driver(tegra20_cpufreq_driver); + +MODULE_ALIAS("platform:tegra20-cpufreq"); +MODULE_AUTHOR("Colin Cross <ccross@android.com>"); +MODULE_DESCRIPTION("NVIDIA Tegra20 cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c new file mode 100644 index 000000000..f64180dd2 --- /dev/null +++ b/drivers/cpufreq/ti-cpufreq.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI CPUFreq/OPP hw-supported driver + * + * Copyright (C) 2016-2017 Texas Instruments, Inc. + * Dave Gerlach <d-gerlach@ti.com> + */ + +#include <linux/cpu.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/pm_opp.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define REVISION_MASK 0xF +#define REVISION_SHIFT 28 + +#define AM33XX_800M_ARM_MPU_MAX_FREQ 0x1E2F +#define AM43XX_600M_ARM_MPU_MAX_FREQ 0xFFA + +#define DRA7_EFUSE_HAS_OD_MPU_OPP 11 +#define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15 +#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18 +#define DRA7_EFUSE_HAS_ALL_MPU_OPP 23 +#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24 + +#define DRA7_EFUSE_NOM_MPU_OPP BIT(0) +#define DRA7_EFUSE_OD_MPU_OPP BIT(1) +#define DRA7_EFUSE_HIGH_MPU_OPP BIT(2) +#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3) + +#define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C +#define OMAP3_CONTROL_IDCODE 0x4830A204 +#define OMAP34xx_ProdID_SKUID 0x4830A20C +#define OMAP3_SYSCON_BASE (0x48000000 + 0x2000 + 0x270) + +#define VERSION_COUNT 2 + +struct ti_cpufreq_data; + +struct ti_cpufreq_soc_data { + const char * const *reg_names; + unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data, + unsigned long efuse); + unsigned long efuse_fallback; + unsigned long efuse_offset; + unsigned long efuse_mask; + unsigned long efuse_shift; + unsigned long rev_offset; + bool multi_regulator; +}; + +struct ti_cpufreq_data { + struct device *cpu_dev; + struct device_node *opp_node; + struct regmap *syscon; + const struct ti_cpufreq_soc_data *soc_data; +}; + +static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + if (!efuse) + efuse = opp_data->soc_data->efuse_fallback; + /* AM335x and AM437x use "OPP disable" bits, so invert */ + return ~efuse; +} + +static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + unsigned long calculated_efuse = DRA7_EFUSE_NOM_MPU_OPP; + + /* + * The efuse on dra7 and am57 parts contains a specific + * value indicating the highest available OPP. + */ + + switch (efuse) { + case DRA76_EFUSE_HAS_PLUS_MPU_OPP: + case DRA76_EFUSE_HAS_ALL_MPU_OPP: + calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP; + fallthrough; + case DRA7_EFUSE_HAS_ALL_MPU_OPP: + case DRA7_EFUSE_HAS_HIGH_MPU_OPP: + calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP; + fallthrough; + case DRA7_EFUSE_HAS_OD_MPU_OPP: + calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP; + } + + return calculated_efuse; +} + +static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + /* OPP enable bit ("Speed Binned") */ + return BIT(efuse); +} + +static struct ti_cpufreq_soc_data am3x_soc_data = { + .efuse_xlate = amx3_efuse_xlate, + .efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ, + .efuse_offset = 0x07fc, + .efuse_mask = 0x1fff, + .rev_offset = 0x600, + .multi_regulator = false, +}; + +static struct ti_cpufreq_soc_data am4x_soc_data = { + .efuse_xlate = amx3_efuse_xlate, + .efuse_fallback = AM43XX_600M_ARM_MPU_MAX_FREQ, + .efuse_offset = 0x0610, + .efuse_mask = 0x3f, + .rev_offset = 0x600, + .multi_regulator = false, +}; + +static struct ti_cpufreq_soc_data dra7_soc_data = { + .efuse_xlate = dra7_efuse_xlate, + .efuse_offset = 0x020c, + .efuse_mask = 0xf80000, + .efuse_shift = 19, + .rev_offset = 0x204, + .multi_regulator = true, +}; + +/* + * OMAP35x TRM (SPRUF98K): + * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. + * Control OMAP Status Register 15:0 (Address 0x4800 244C) + * to separate between omap3503, omap3515, omap3525, omap3530 + * and feature presence. + * There are encodings for versions limited to 400/266MHz + * but we ignore. + * Not clear if this also holds for omap34xx. + * some eFuse values e.g. CONTROL_FUSE_OPP1_VDD1 + * are stored in the SYSCON register range + * Register 0x4830A20C [ProdID.SKUID] [0:3] + * 0x0 for normal 600/430MHz device. + * 0x8 for 720/520MHz device. + * Not clear what omap34xx value is. + */ + +static struct ti_cpufreq_soc_data omap34xx_soc_data = { + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP34xx_ProdID_SKUID - OMAP3_SYSCON_BASE, + .efuse_shift = 3, + .efuse_mask = BIT(3), + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = false, +}; + +/* + * AM/DM37x TRM (SPRUGN4M) + * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. + * Control Device Status Register 15:0 (Address 0x4800 244C) + * to separate between am3703, am3715, dm3725, dm3730 + * and feature presence. + * Speed Binned = Bit 9 + * 0 800/600 MHz + * 1 1000/800 MHz + * some eFuse values e.g. CONTROL_FUSE_OPP 1G_VDD1 + * are stored in the SYSCON register range. + * There is no 0x4830A20C [ProdID.SKUID] register (exists but + * seems to always read as 0). + */ + +static const char * const omap3_reg_names[] = {"cpu0", "vbb", NULL}; + +static struct ti_cpufreq_soc_data omap36xx_soc_data = { + .reg_names = omap3_reg_names, + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, + .efuse_shift = 9, + .efuse_mask = BIT(9), + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = true, +}; + +/* + * AM3517 is quite similar to AM/DM37x except that it has no + * high speed grade eFuse and no abb ldo + */ + +static struct ti_cpufreq_soc_data am3517_soc_data = { + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, + .efuse_shift = 0, + .efuse_mask = 0, + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = false, +}; + + +/** + * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC + * @opp_data: pointer to ti_cpufreq_data context + * @efuse_value: Set to the value parsed from efuse + * + * Returns error code if efuse not read properly. + */ +static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data, + u32 *efuse_value) +{ + struct device *dev = opp_data->cpu_dev; + u32 efuse; + int ret; + + ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset, + &efuse); + if (ret == -EIO) { + /* not a syscon register! */ + void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + + opp_data->soc_data->efuse_offset, 4); + + if (!regs) + return -ENOMEM; + efuse = readl(regs); + iounmap(regs); + } + else if (ret) { + dev_err(dev, + "Failed to read the efuse value from syscon: %d\n", + ret); + return ret; + } + + efuse = (efuse & opp_data->soc_data->efuse_mask); + efuse >>= opp_data->soc_data->efuse_shift; + + *efuse_value = opp_data->soc_data->efuse_xlate(opp_data, efuse); + + return 0; +} + +/** + * ti_cpufreq_get_rev() - Parse and return rev value present on SoC + * @opp_data: pointer to ti_cpufreq_data context + * @revision_value: Set to the value parsed from revision register + * + * Returns error code if revision not read properly. + */ +static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data, + u32 *revision_value) +{ + struct device *dev = opp_data->cpu_dev; + u32 revision; + int ret; + + ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset, + &revision); + if (ret == -EIO) { + /* not a syscon register! */ + void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + + opp_data->soc_data->rev_offset, 4); + + if (!regs) + return -ENOMEM; + revision = readl(regs); + iounmap(regs); + } + else if (ret) { + dev_err(dev, + "Failed to read the revision number from syscon: %d\n", + ret); + return ret; + } + + *revision_value = BIT((revision >> REVISION_SHIFT) & REVISION_MASK); + + return 0; +} + +static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data) +{ + struct device *dev = opp_data->cpu_dev; + struct device_node *np = opp_data->opp_node; + + opp_data->syscon = syscon_regmap_lookup_by_phandle(np, + "syscon"); + if (IS_ERR(opp_data->syscon)) { + dev_err(dev, + "\"syscon\" is missing, cannot use OPPv2 table.\n"); + return PTR_ERR(opp_data->syscon); + } + + return 0; +} + +static const struct of_device_id ti_cpufreq_of_match[] = { + { .compatible = "ti,am33xx", .data = &am3x_soc_data, }, + { .compatible = "ti,am3517", .data = &am3517_soc_data, }, + { .compatible = "ti,am43", .data = &am4x_soc_data, }, + { .compatible = "ti,dra7", .data = &dra7_soc_data }, + { .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, }, + { .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, }, + /* legacy */ + { .compatible = "ti,omap3430", .data = &omap34xx_soc_data, }, + { .compatible = "ti,omap3630", .data = &omap36xx_soc_data, }, + {}, +}; + +static const struct of_device_id *ti_cpufreq_match_node(void) +{ + struct device_node *np; + const struct of_device_id *match; + + np = of_find_node_by_path("/"); + match = of_match_node(ti_cpufreq_of_match, np); + of_node_put(np); + + return match; +} + +static int ti_cpufreq_probe(struct platform_device *pdev) +{ + u32 version[VERSION_COUNT]; + const struct of_device_id *match; + struct ti_cpufreq_data *opp_data; + const char * const default_reg_names[] = {"vdd", "vbb", NULL}; + int ret; + struct dev_pm_opp_config config = { + .supported_hw = version, + .supported_hw_count = ARRAY_SIZE(version), + }; + + match = dev_get_platdata(&pdev->dev); + if (!match) + return -ENODEV; + + opp_data = devm_kzalloc(&pdev->dev, sizeof(*opp_data), GFP_KERNEL); + if (!opp_data) + return -ENOMEM; + + opp_data->soc_data = match->data; + + opp_data->cpu_dev = get_cpu_device(0); + if (!opp_data->cpu_dev) { + pr_err("%s: Failed to get device for CPU0\n", __func__); + return -ENODEV; + } + + opp_data->opp_node = dev_pm_opp_of_get_opp_desc_node(opp_data->cpu_dev); + if (!opp_data->opp_node) { + dev_info(opp_data->cpu_dev, + "OPP-v2 not supported, cpufreq-dt will attempt to use legacy tables.\n"); + goto register_cpufreq_dt; + } + + ret = ti_cpufreq_setup_syscon_register(opp_data); + if (ret) + goto fail_put_node; + + /* + * OPPs determine whether or not they are supported based on + * two metrics: + * 0 - SoC Revision + * 1 - eFuse value + */ + ret = ti_cpufreq_get_rev(opp_data, &version[0]); + if (ret) + goto fail_put_node; + + ret = ti_cpufreq_get_efuse(opp_data, &version[1]); + if (ret) + goto fail_put_node; + + if (opp_data->soc_data->multi_regulator) { + if (opp_data->soc_data->reg_names) + config.regulator_names = opp_data->soc_data->reg_names; + else + config.regulator_names = default_reg_names; + } + + ret = dev_pm_opp_set_config(opp_data->cpu_dev, &config); + if (ret < 0) { + dev_err(opp_data->cpu_dev, "Failed to set OPP config\n"); + goto fail_put_node; + } + + of_node_put(opp_data->opp_node); + +register_cpufreq_dt: + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + + return 0; + +fail_put_node: + of_node_put(opp_data->opp_node); + + return ret; +} + +static int __init ti_cpufreq_init(void) +{ + const struct of_device_id *match; + + /* Check to ensure we are on a compatible platform */ + match = ti_cpufreq_match_node(); + if (match) + platform_device_register_data(NULL, "ti-cpufreq", -1, match, + sizeof(*match)); + + return 0; +} +module_init(ti_cpufreq_init); + +static struct platform_driver ti_cpufreq_driver = { + .probe = ti_cpufreq_probe, + .driver = { + .name = "ti-cpufreq", + }, +}; +builtin_platform_driver(ti_cpufreq_driver); + +MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver"); +MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c new file mode 100644 index 000000000..d295f405c --- /dev/null +++ b/drivers/cpufreq/vexpress-spc-cpufreq.c @@ -0,0 +1,579 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Versatile Express SPC CPUFreq Interface driver + * + * Copyright (C) 2013 - 2019 ARM Ltd. + * Sudeep Holla <sudeep.holla@arm.com> + * + * Copyright (C) 2013 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/topology.h> +#include <linux/types.h> + +/* Currently we support only two clusters */ +#define A15_CLUSTER 0 +#define A7_CLUSTER 1 +#define MAX_CLUSTERS 2 + +#ifdef CONFIG_BL_SWITCHER +#include <asm/bL_switcher.h> +static bool bL_switching_enabled; +#define is_bL_switching_enabled() bL_switching_enabled +#define set_switching_enabled(x) (bL_switching_enabled = (x)) +#else +#define is_bL_switching_enabled() false +#define set_switching_enabled(x) do { } while (0) +#define bL_switch_request(...) do { } while (0) +#define bL_switcher_put_enabled() do { } while (0) +#define bL_switcher_get_enabled() do { } while (0) +#endif + +#define ACTUAL_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq << 1 : freq) +#define VIRT_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq >> 1 : freq) + +static struct clk *clk[MAX_CLUSTERS]; +static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1]; +static atomic_t cluster_usage[MAX_CLUSTERS + 1]; + +static unsigned int clk_big_min; /* (Big) clock frequencies */ +static unsigned int clk_little_max; /* Maximum clock frequency (Little) */ + +static DEFINE_PER_CPU(unsigned int, physical_cluster); +static DEFINE_PER_CPU(unsigned int, cpu_last_req_freq); + +static struct mutex cluster_lock[MAX_CLUSTERS]; + +static inline int raw_cpu_to_cluster(int cpu) +{ + return topology_physical_package_id(cpu); +} + +static inline int cpu_to_cluster(int cpu) +{ + return is_bL_switching_enabled() ? + MAX_CLUSTERS : raw_cpu_to_cluster(cpu); +} + +static unsigned int find_cluster_maxfreq(int cluster) +{ + int j; + u32 max_freq = 0, cpu_freq; + + for_each_online_cpu(j) { + cpu_freq = per_cpu(cpu_last_req_freq, j); + + if (cluster == per_cpu(physical_cluster, j) && + max_freq < cpu_freq) + max_freq = cpu_freq; + } + + return max_freq; +} + +static unsigned int clk_get_cpu_rate(unsigned int cpu) +{ + u32 cur_cluster = per_cpu(physical_cluster, cpu); + u32 rate = clk_get_rate(clk[cur_cluster]) / 1000; + + /* For switcher we use virtual A7 clock rates */ + if (is_bL_switching_enabled()) + rate = VIRT_FREQ(cur_cluster, rate); + + return rate; +} + +static unsigned int ve_spc_cpufreq_get_rate(unsigned int cpu) +{ + if (is_bL_switching_enabled()) + return per_cpu(cpu_last_req_freq, cpu); + else + return clk_get_cpu_rate(cpu); +} + +static unsigned int +ve_spc_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) +{ + u32 new_rate, prev_rate; + int ret; + bool bLs = is_bL_switching_enabled(); + + mutex_lock(&cluster_lock[new_cluster]); + + if (bLs) { + prev_rate = per_cpu(cpu_last_req_freq, cpu); + per_cpu(cpu_last_req_freq, cpu) = rate; + per_cpu(physical_cluster, cpu) = new_cluster; + + new_rate = find_cluster_maxfreq(new_cluster); + new_rate = ACTUAL_FREQ(new_cluster, new_rate); + } else { + new_rate = rate; + } + + ret = clk_set_rate(clk[new_cluster], new_rate * 1000); + if (!ret) { + /* + * FIXME: clk_set_rate hasn't returned an error here however it + * may be that clk_change_rate failed due to hardware or + * firmware issues and wasn't able to report that due to the + * current design of the clk core layer. To work around this + * problem we will read back the clock rate and check it is + * correct. This needs to be removed once clk core is fixed. + */ + if (clk_get_rate(clk[new_cluster]) != new_rate * 1000) + ret = -EIO; + } + + if (WARN_ON(ret)) { + if (bLs) { + per_cpu(cpu_last_req_freq, cpu) = prev_rate; + per_cpu(physical_cluster, cpu) = old_cluster; + } + + mutex_unlock(&cluster_lock[new_cluster]); + + return ret; + } + + mutex_unlock(&cluster_lock[new_cluster]); + + /* Recalc freq for old cluster when switching clusters */ + if (old_cluster != new_cluster) { + /* Switch cluster */ + bL_switch_request(cpu, new_cluster); + + mutex_lock(&cluster_lock[old_cluster]); + + /* Set freq of old cluster if there are cpus left on it */ + new_rate = find_cluster_maxfreq(old_cluster); + new_rate = ACTUAL_FREQ(old_cluster, new_rate); + + if (new_rate && + clk_set_rate(clk[old_cluster], new_rate * 1000)) { + pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n", + __func__, ret, old_cluster); + } + mutex_unlock(&cluster_lock[old_cluster]); + } + + return 0; +} + +/* Set clock frequency */ +static int ve_spc_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + u32 cpu = policy->cpu, cur_cluster, new_cluster, actual_cluster; + unsigned int freqs_new; + + cur_cluster = cpu_to_cluster(cpu); + new_cluster = actual_cluster = per_cpu(physical_cluster, cpu); + + freqs_new = freq_table[cur_cluster][index].frequency; + + if (is_bL_switching_enabled()) { + if (actual_cluster == A15_CLUSTER && freqs_new < clk_big_min) + new_cluster = A7_CLUSTER; + else if (actual_cluster == A7_CLUSTER && + freqs_new > clk_little_max) + new_cluster = A15_CLUSTER; + } + + return ve_spc_cpufreq_set_rate(cpu, actual_cluster, new_cluster, + freqs_new); +} + +static inline u32 get_table_count(struct cpufreq_frequency_table *table) +{ + int count; + + for (count = 0; table[count].frequency != CPUFREQ_TABLE_END; count++) + ; + + return count; +} + +/* get the minimum frequency in the cpufreq_frequency_table */ +static inline u32 get_table_min(struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + u32 min_freq = ~0; + + cpufreq_for_each_entry(pos, table) + if (pos->frequency < min_freq) + min_freq = pos->frequency; + return min_freq; +} + +/* get the maximum frequency in the cpufreq_frequency_table */ +static inline u32 get_table_max(struct cpufreq_frequency_table *table) +{ + struct cpufreq_frequency_table *pos; + u32 max_freq = 0; + + cpufreq_for_each_entry(pos, table) + if (pos->frequency > max_freq) + max_freq = pos->frequency; + return max_freq; +} + +static bool search_frequency(struct cpufreq_frequency_table *table, int size, + unsigned int freq) +{ + int count; + + for (count = 0; count < size; count++) { + if (table[count].frequency == freq) + return true; + } + + return false; +} + +static int merge_cluster_tables(void) +{ + int i, j, k = 0, count = 1; + struct cpufreq_frequency_table *table; + + for (i = 0; i < MAX_CLUSTERS; i++) + count += get_table_count(freq_table[i]); + + table = kcalloc(count, sizeof(*table), GFP_KERNEL); + if (!table) + return -ENOMEM; + + freq_table[MAX_CLUSTERS] = table; + + /* Add in reverse order to get freqs in increasing order */ + for (i = MAX_CLUSTERS - 1; i >= 0; i--, count = k) { + for (j = 0; freq_table[i][j].frequency != CPUFREQ_TABLE_END; + j++) { + if (i == A15_CLUSTER && + search_frequency(table, count, freq_table[i][j].frequency)) + continue; /* skip duplicates */ + table[k++].frequency = + VIRT_FREQ(i, freq_table[i][j].frequency); + } + } + + table[k].driver_data = k; + table[k].frequency = CPUFREQ_TABLE_END; + + return 0; +} + +static void _put_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) +{ + u32 cluster = raw_cpu_to_cluster(cpu_dev->id); + + if (!freq_table[cluster]) + return; + + clk_put(clk[cluster]); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); +} + +static void put_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) +{ + u32 cluster = cpu_to_cluster(cpu_dev->id); + int i; + + if (atomic_dec_return(&cluster_usage[cluster])) + return; + + if (cluster < MAX_CLUSTERS) + return _put_cluster_clk_and_freq_table(cpu_dev, cpumask); + + for_each_present_cpu(i) { + struct device *cdev = get_cpu_device(i); + + if (!cdev) + return; + + _put_cluster_clk_and_freq_table(cdev, cpumask); + } + + /* free virtual table */ + kfree(freq_table[cluster]); +} + +static int _get_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) +{ + u32 cluster = raw_cpu_to_cluster(cpu_dev->id); + int ret; + + if (freq_table[cluster]) + return 0; + + /* + * platform specific SPC code must initialise the opp table + * so just check if the OPP count is non-zero + */ + ret = dev_pm_opp_get_opp_count(cpu_dev) <= 0; + if (ret) + goto out; + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]); + if (ret) + goto out; + + clk[cluster] = clk_get(cpu_dev, NULL); + if (!IS_ERR(clk[cluster])) + return 0; + + dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n", + __func__, cpu_dev->id, cluster); + ret = PTR_ERR(clk[cluster]); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); + +out: + dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__, + cluster); + return ret; +} + +static int get_cluster_clk_and_freq_table(struct device *cpu_dev, + const struct cpumask *cpumask) +{ + u32 cluster = cpu_to_cluster(cpu_dev->id); + int i, ret; + + if (atomic_inc_return(&cluster_usage[cluster]) != 1) + return 0; + + if (cluster < MAX_CLUSTERS) { + ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask); + if (ret) + atomic_dec(&cluster_usage[cluster]); + return ret; + } + + /* + * Get data for all clusters and fill virtual cluster with a merge of + * both + */ + for_each_present_cpu(i) { + struct device *cdev = get_cpu_device(i); + + if (!cdev) + return -ENODEV; + + ret = _get_cluster_clk_and_freq_table(cdev, cpumask); + if (ret) + goto put_clusters; + } + + ret = merge_cluster_tables(); + if (ret) + goto put_clusters; + + /* Assuming 2 cluster, set clk_big_min and clk_little_max */ + clk_big_min = get_table_min(freq_table[A15_CLUSTER]); + clk_little_max = VIRT_FREQ(A7_CLUSTER, + get_table_max(freq_table[A7_CLUSTER])); + + return 0; + +put_clusters: + for_each_present_cpu(i) { + struct device *cdev = get_cpu_device(i); + + if (!cdev) + return -ENODEV; + + _put_cluster_clk_and_freq_table(cdev, cpumask); + } + + atomic_dec(&cluster_usage[cluster]); + + return ret; +} + +/* Per-CPU initialization */ +static int ve_spc_cpufreq_init(struct cpufreq_policy *policy) +{ + u32 cur_cluster = cpu_to_cluster(policy->cpu); + struct device *cpu_dev; + int ret; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + + if (cur_cluster < MAX_CLUSTERS) { + int cpu; + + dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus); + + for_each_cpu(cpu, policy->cpus) + per_cpu(physical_cluster, cpu) = cur_cluster; + } else { + /* Assumption: during init, we are always running on A15 */ + per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER; + } + + ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus); + if (ret) + return ret; + + policy->freq_table = freq_table[cur_cluster]; + policy->cpuinfo.transition_latency = 1000000; /* 1 ms */ + + if (is_bL_switching_enabled()) + per_cpu(cpu_last_req_freq, policy->cpu) = + clk_get_cpu_rate(policy->cpu); + + dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu); + return 0; +} + +static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy) +{ + struct device *cpu_dev; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + + put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus); + return 0; +} + +static struct cpufreq_driver ve_spc_cpufreq_driver = { + .name = "vexpress-spc", + .flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY | + CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = ve_spc_cpufreq_set_target, + .get = ve_spc_cpufreq_get_rate, + .init = ve_spc_cpufreq_init, + .exit = ve_spc_cpufreq_exit, + .register_em = cpufreq_register_em_with_opp, + .attr = cpufreq_generic_attr, +}; + +#ifdef CONFIG_BL_SWITCHER +static int bL_cpufreq_switcher_notifier(struct notifier_block *nfb, + unsigned long action, void *_arg) +{ + pr_debug("%s: action: %ld\n", __func__, action); + + switch (action) { + case BL_NOTIFY_PRE_ENABLE: + case BL_NOTIFY_PRE_DISABLE: + cpufreq_unregister_driver(&ve_spc_cpufreq_driver); + break; + + case BL_NOTIFY_POST_ENABLE: + set_switching_enabled(true); + cpufreq_register_driver(&ve_spc_cpufreq_driver); + break; + + case BL_NOTIFY_POST_DISABLE: + set_switching_enabled(false); + cpufreq_register_driver(&ve_spc_cpufreq_driver); + break; + + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +static struct notifier_block bL_switcher_notifier = { + .notifier_call = bL_cpufreq_switcher_notifier, +}; + +static int __bLs_register_notifier(void) +{ + return bL_switcher_register_notifier(&bL_switcher_notifier); +} + +static int __bLs_unregister_notifier(void) +{ + return bL_switcher_unregister_notifier(&bL_switcher_notifier); +} +#else +static int __bLs_register_notifier(void) { return 0; } +static int __bLs_unregister_notifier(void) { return 0; } +#endif + +static int ve_spc_cpufreq_probe(struct platform_device *pdev) +{ + int ret, i; + + set_switching_enabled(bL_switcher_get_enabled()); + + for (i = 0; i < MAX_CLUSTERS; i++) + mutex_init(&cluster_lock[i]); + + if (!is_bL_switching_enabled()) + ve_spc_cpufreq_driver.flags |= CPUFREQ_IS_COOLING_DEV; + + ret = cpufreq_register_driver(&ve_spc_cpufreq_driver); + if (ret) { + pr_info("%s: Failed registering platform driver: %s, err: %d\n", + __func__, ve_spc_cpufreq_driver.name, ret); + } else { + ret = __bLs_register_notifier(); + if (ret) + cpufreq_unregister_driver(&ve_spc_cpufreq_driver); + else + pr_info("%s: Registered platform driver: %s\n", + __func__, ve_spc_cpufreq_driver.name); + } + + bL_switcher_put_enabled(); + return ret; +} + +static int ve_spc_cpufreq_remove(struct platform_device *pdev) +{ + bL_switcher_get_enabled(); + __bLs_unregister_notifier(); + cpufreq_unregister_driver(&ve_spc_cpufreq_driver); + bL_switcher_put_enabled(); + pr_info("%s: Un-registered platform driver: %s\n", __func__, + ve_spc_cpufreq_driver.name); + return 0; +} + +static struct platform_driver ve_spc_cpufreq_platdrv = { + .driver = { + .name = "vexpress-spc-cpufreq", + }, + .probe = ve_spc_cpufreq_probe, + .remove = ve_spc_cpufreq_remove, +}; +module_platform_driver(ve_spc_cpufreq_platdrv); + +MODULE_ALIAS("platform:vexpress-spc-cpufreq"); +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("Vexpress SPC ARM big LITTLE cpufreq driver"); +MODULE_LICENSE("GPL v2"); |