summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/inside-secure/safexcel.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/crypto/inside-secure/safexcel.c')
-rw-r--r--drivers/crypto/inside-secure/safexcel.c2027
1 files changed, 2027 insertions, 0 deletions
diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c
new file mode 100644
index 000000000..ba4613a8e
--- /dev/null
+++ b/drivers/crypto/inside-secure/safexcel.c
@@ -0,0 +1,2027 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Marvell
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#include <crypto/internal/aead.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/skcipher.h>
+
+#include "safexcel.h"
+
+static u32 max_rings = EIP197_MAX_RINGS;
+module_param(max_rings, uint, 0644);
+MODULE_PARM_DESC(max_rings, "Maximum number of rings to use.");
+
+static void eip197_trc_cache_setupvirt(struct safexcel_crypto_priv *priv)
+{
+ int i;
+
+ /*
+ * Map all interfaces/rings to register index 0
+ * so they can share contexts. Without this, the EIP197 will
+ * assume each interface/ring to be in its own memory domain
+ * i.e. have its own subset of UNIQUE memory addresses.
+ * Which would cause records with the SAME memory address to
+ * use DIFFERENT cache buffers, causing both poor cache utilization
+ * AND serious coherence/invalidation issues.
+ */
+ for (i = 0; i < 4; i++)
+ writel(0, priv->base + EIP197_FLUE_IFC_LUT(i));
+
+ /*
+ * Initialize other virtualization regs for cache
+ * These may not be in their reset state ...
+ */
+ for (i = 0; i < priv->config.rings; i++) {
+ writel(0, priv->base + EIP197_FLUE_CACHEBASE_LO(i));
+ writel(0, priv->base + EIP197_FLUE_CACHEBASE_HI(i));
+ writel(EIP197_FLUE_CONFIG_MAGIC,
+ priv->base + EIP197_FLUE_CONFIG(i));
+ }
+ writel(0, priv->base + EIP197_FLUE_OFFSETS);
+ writel(0, priv->base + EIP197_FLUE_ARC4_OFFSET);
+}
+
+static void eip197_trc_cache_banksel(struct safexcel_crypto_priv *priv,
+ u32 addrmid, int *actbank)
+{
+ u32 val;
+ int curbank;
+
+ curbank = addrmid >> 16;
+ if (curbank != *actbank) {
+ val = readl(priv->base + EIP197_CS_RAM_CTRL);
+ val = (val & ~EIP197_CS_BANKSEL_MASK) |
+ (curbank << EIP197_CS_BANKSEL_OFS);
+ writel(val, priv->base + EIP197_CS_RAM_CTRL);
+ *actbank = curbank;
+ }
+}
+
+static u32 eip197_trc_cache_probe(struct safexcel_crypto_priv *priv,
+ int maxbanks, u32 probemask, u32 stride)
+{
+ u32 val, addrhi, addrlo, addrmid, addralias, delta, marker;
+ int actbank;
+
+ /*
+ * And probe the actual size of the physically attached cache data RAM
+ * Using a binary subdivision algorithm downto 32 byte cache lines.
+ */
+ addrhi = 1 << (16 + maxbanks);
+ addrlo = 0;
+ actbank = min(maxbanks - 1, 0);
+ while ((addrhi - addrlo) > stride) {
+ /* write marker to lowest address in top half */
+ addrmid = (addrhi + addrlo) >> 1;
+ marker = (addrmid ^ 0xabadbabe) & probemask; /* Unique */
+ eip197_trc_cache_banksel(priv, addrmid, &actbank);
+ writel(marker,
+ priv->base + EIP197_CLASSIFICATION_RAMS +
+ (addrmid & 0xffff));
+
+ /* write invalid markers to possible aliases */
+ delta = 1 << __fls(addrmid);
+ while (delta >= stride) {
+ addralias = addrmid - delta;
+ eip197_trc_cache_banksel(priv, addralias, &actbank);
+ writel(~marker,
+ priv->base + EIP197_CLASSIFICATION_RAMS +
+ (addralias & 0xffff));
+ delta >>= 1;
+ }
+
+ /* read back marker from top half */
+ eip197_trc_cache_banksel(priv, addrmid, &actbank);
+ val = readl(priv->base + EIP197_CLASSIFICATION_RAMS +
+ (addrmid & 0xffff));
+
+ if ((val & probemask) == marker)
+ /* read back correct, continue with top half */
+ addrlo = addrmid;
+ else
+ /* not read back correct, continue with bottom half */
+ addrhi = addrmid;
+ }
+ return addrhi;
+}
+
+static void eip197_trc_cache_clear(struct safexcel_crypto_priv *priv,
+ int cs_rc_max, int cs_ht_wc)
+{
+ int i;
+ u32 htable_offset, val, offset;
+
+ /* Clear all records in administration RAM */
+ for (i = 0; i < cs_rc_max; i++) {
+ offset = EIP197_CLASSIFICATION_RAMS + i * EIP197_CS_RC_SIZE;
+
+ writel(EIP197_CS_RC_NEXT(EIP197_RC_NULL) |
+ EIP197_CS_RC_PREV(EIP197_RC_NULL),
+ priv->base + offset);
+
+ val = EIP197_CS_RC_NEXT(i + 1) | EIP197_CS_RC_PREV(i - 1);
+ if (i == 0)
+ val |= EIP197_CS_RC_PREV(EIP197_RC_NULL);
+ else if (i == cs_rc_max - 1)
+ val |= EIP197_CS_RC_NEXT(EIP197_RC_NULL);
+ writel(val, priv->base + offset + 4);
+ /* must also initialize the address key due to ECC! */
+ writel(0, priv->base + offset + 8);
+ writel(0, priv->base + offset + 12);
+ }
+
+ /* Clear the hash table entries */
+ htable_offset = cs_rc_max * EIP197_CS_RC_SIZE;
+ for (i = 0; i < cs_ht_wc; i++)
+ writel(GENMASK(29, 0),
+ priv->base + EIP197_CLASSIFICATION_RAMS +
+ htable_offset + i * sizeof(u32));
+}
+
+static int eip197_trc_cache_init(struct safexcel_crypto_priv *priv)
+{
+ u32 val, dsize, asize;
+ int cs_rc_max, cs_ht_wc, cs_trc_rec_wc, cs_trc_lg_rec_wc;
+ int cs_rc_abs_max, cs_ht_sz;
+ int maxbanks;
+
+ /* Setup (dummy) virtualization for cache */
+ eip197_trc_cache_setupvirt(priv);
+
+ /*
+ * Enable the record cache memory access and
+ * probe the bank select width
+ */
+ val = readl(priv->base + EIP197_CS_RAM_CTRL);
+ val &= ~EIP197_TRC_ENABLE_MASK;
+ val |= EIP197_TRC_ENABLE_0 | EIP197_CS_BANKSEL_MASK;
+ writel(val, priv->base + EIP197_CS_RAM_CTRL);
+ val = readl(priv->base + EIP197_CS_RAM_CTRL);
+ maxbanks = ((val&EIP197_CS_BANKSEL_MASK)>>EIP197_CS_BANKSEL_OFS) + 1;
+
+ /* Clear all ECC errors */
+ writel(0, priv->base + EIP197_TRC_ECCCTRL);
+
+ /*
+ * Make sure the cache memory is accessible by taking record cache into
+ * reset. Need data memory access here, not admin access.
+ */
+ val = readl(priv->base + EIP197_TRC_PARAMS);
+ val |= EIP197_TRC_PARAMS_SW_RESET | EIP197_TRC_PARAMS_DATA_ACCESS;
+ writel(val, priv->base + EIP197_TRC_PARAMS);
+
+ /* Probed data RAM size in bytes */
+ dsize = eip197_trc_cache_probe(priv, maxbanks, 0xffffffff, 32);
+
+ /*
+ * Now probe the administration RAM size pretty much the same way
+ * Except that only the lower 30 bits are writable and we don't need
+ * bank selects
+ */
+ val = readl(priv->base + EIP197_TRC_PARAMS);
+ /* admin access now */
+ val &= ~(EIP197_TRC_PARAMS_DATA_ACCESS | EIP197_CS_BANKSEL_MASK);
+ writel(val, priv->base + EIP197_TRC_PARAMS);
+
+ /* Probed admin RAM size in admin words */
+ asize = eip197_trc_cache_probe(priv, 0, 0x3fffffff, 16) >> 4;
+
+ /* Clear any ECC errors detected while probing! */
+ writel(0, priv->base + EIP197_TRC_ECCCTRL);
+
+ /* Sanity check probing results */
+ if (dsize < EIP197_MIN_DSIZE || asize < EIP197_MIN_ASIZE) {
+ dev_err(priv->dev, "Record cache probing failed (%d,%d).",
+ dsize, asize);
+ return -ENODEV;
+ }
+
+ /*
+ * Determine optimal configuration from RAM sizes
+ * Note that we assume that the physical RAM configuration is sane
+ * Therefore, we don't do any parameter error checking here ...
+ */
+
+ /* For now, just use a single record format covering everything */
+ cs_trc_rec_wc = EIP197_CS_TRC_REC_WC;
+ cs_trc_lg_rec_wc = EIP197_CS_TRC_REC_WC;
+
+ /*
+ * Step #1: How many records will physically fit?
+ * Hard upper limit is 1023!
+ */
+ cs_rc_abs_max = min_t(uint, ((dsize >> 2) / cs_trc_lg_rec_wc), 1023);
+ /* Step #2: Need at least 2 words in the admin RAM per record */
+ cs_rc_max = min_t(uint, cs_rc_abs_max, (asize >> 1));
+ /* Step #3: Determine log2 of hash table size */
+ cs_ht_sz = __fls(asize - cs_rc_max) - 2;
+ /* Step #4: determine current size of hash table in dwords */
+ cs_ht_wc = 16 << cs_ht_sz; /* dwords, not admin words */
+ /* Step #5: add back excess words and see if we can fit more records */
+ cs_rc_max = min_t(uint, cs_rc_abs_max, asize - (cs_ht_wc >> 2));
+
+ /* Clear the cache RAMs */
+ eip197_trc_cache_clear(priv, cs_rc_max, cs_ht_wc);
+
+ /* Disable the record cache memory access */
+ val = readl(priv->base + EIP197_CS_RAM_CTRL);
+ val &= ~EIP197_TRC_ENABLE_MASK;
+ writel(val, priv->base + EIP197_CS_RAM_CTRL);
+
+ /* Write head and tail pointers of the record free chain */
+ val = EIP197_TRC_FREECHAIN_HEAD_PTR(0) |
+ EIP197_TRC_FREECHAIN_TAIL_PTR(cs_rc_max - 1);
+ writel(val, priv->base + EIP197_TRC_FREECHAIN);
+
+ /* Configure the record cache #1 */
+ val = EIP197_TRC_PARAMS2_RC_SZ_SMALL(cs_trc_rec_wc) |
+ EIP197_TRC_PARAMS2_HTABLE_PTR(cs_rc_max);
+ writel(val, priv->base + EIP197_TRC_PARAMS2);
+
+ /* Configure the record cache #2 */
+ val = EIP197_TRC_PARAMS_RC_SZ_LARGE(cs_trc_lg_rec_wc) |
+ EIP197_TRC_PARAMS_BLK_TIMER_SPEED(1) |
+ EIP197_TRC_PARAMS_HTABLE_SZ(cs_ht_sz);
+ writel(val, priv->base + EIP197_TRC_PARAMS);
+
+ dev_info(priv->dev, "TRC init: %dd,%da (%dr,%dh)\n",
+ dsize, asize, cs_rc_max, cs_ht_wc + cs_ht_wc);
+ return 0;
+}
+
+static void eip197_init_firmware(struct safexcel_crypto_priv *priv)
+{
+ int pe, i;
+ u32 val;
+
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ /* Configure the token FIFO's */
+ writel(3, EIP197_PE(priv) + EIP197_PE_ICE_PUTF_CTRL(pe));
+ writel(0, EIP197_PE(priv) + EIP197_PE_ICE_PPTF_CTRL(pe));
+
+ /* Clear the ICE scratchpad memory */
+ val = readl(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
+ val |= EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_TIMER |
+ EIP197_PE_ICE_SCRATCH_CTRL_TIMER_EN |
+ EIP197_PE_ICE_SCRATCH_CTRL_SCRATCH_ACCESS |
+ EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_ACCESS;
+ writel(val, EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
+
+ /* clear the scratchpad RAM using 32 bit writes only */
+ for (i = 0; i < EIP197_NUM_OF_SCRATCH_BLOCKS; i++)
+ writel(0, EIP197_PE(priv) +
+ EIP197_PE_ICE_SCRATCH_RAM(pe) + (i << 2));
+
+ /* Reset the IFPP engine to make its program mem accessible */
+ writel(EIP197_PE_ICE_x_CTRL_SW_RESET |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR,
+ EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe));
+
+ /* Reset the IPUE engine to make its program mem accessible */
+ writel(EIP197_PE_ICE_x_CTRL_SW_RESET |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR,
+ EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe));
+
+ /* Enable access to all IFPP program memories */
+ writel(EIP197_PE_ICE_RAM_CTRL_FPP_PROG_EN,
+ EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
+
+ /* bypass the OCE, if present */
+ if (priv->flags & EIP197_OCE)
+ writel(EIP197_DEBUG_OCE_BYPASS, EIP197_PE(priv) +
+ EIP197_PE_DEBUG(pe));
+ }
+
+}
+
+static int eip197_write_firmware(struct safexcel_crypto_priv *priv,
+ const struct firmware *fw)
+{
+ const __be32 *data = (const __be32 *)fw->data;
+ int i;
+
+ /* Write the firmware */
+ for (i = 0; i < fw->size / sizeof(u32); i++)
+ writel(be32_to_cpu(data[i]),
+ priv->base + EIP197_CLASSIFICATION_RAMS +
+ i * sizeof(__be32));
+
+ /* Exclude final 2 NOPs from size */
+ return i - EIP197_FW_TERMINAL_NOPS;
+}
+
+/*
+ * If FW is actual production firmware, then poll for its initialization
+ * to complete and check if it is good for the HW, otherwise just return OK.
+ */
+static bool poll_fw_ready(struct safexcel_crypto_priv *priv, int fpp)
+{
+ int pe, pollcnt;
+ u32 base, pollofs;
+
+ if (fpp)
+ pollofs = EIP197_FW_FPP_READY;
+ else
+ pollofs = EIP197_FW_PUE_READY;
+
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ base = EIP197_PE_ICE_SCRATCH_RAM(pe);
+ pollcnt = EIP197_FW_START_POLLCNT;
+ while (pollcnt &&
+ (readl_relaxed(EIP197_PE(priv) + base +
+ pollofs) != 1)) {
+ pollcnt--;
+ }
+ if (!pollcnt) {
+ dev_err(priv->dev, "FW(%d) for PE %d failed to start\n",
+ fpp, pe);
+ return false;
+ }
+ }
+ return true;
+}
+
+static bool eip197_start_firmware(struct safexcel_crypto_priv *priv,
+ int ipuesz, int ifppsz, int minifw)
+{
+ int pe;
+ u32 val;
+
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ /* Disable access to all program memory */
+ writel(0, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
+
+ /* Start IFPP microengines */
+ if (minifw)
+ val = 0;
+ else
+ val = EIP197_PE_ICE_UENG_START_OFFSET((ifppsz - 1) &
+ EIP197_PE_ICE_UENG_INIT_ALIGN_MASK) |
+ EIP197_PE_ICE_UENG_DEBUG_RESET;
+ writel(val, EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe));
+
+ /* Start IPUE microengines */
+ if (minifw)
+ val = 0;
+ else
+ val = EIP197_PE_ICE_UENG_START_OFFSET((ipuesz - 1) &
+ EIP197_PE_ICE_UENG_INIT_ALIGN_MASK) |
+ EIP197_PE_ICE_UENG_DEBUG_RESET;
+ writel(val, EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe));
+ }
+
+ /* For miniFW startup, there is no initialization, so always succeed */
+ if (minifw)
+ return true;
+
+ /* Wait until all the firmwares have properly started up */
+ if (!poll_fw_ready(priv, 1))
+ return false;
+ if (!poll_fw_ready(priv, 0))
+ return false;
+
+ return true;
+}
+
+static int eip197_load_firmwares(struct safexcel_crypto_priv *priv)
+{
+ const char *fw_name[] = {"ifpp.bin", "ipue.bin"};
+ const struct firmware *fw[FW_NB];
+ char fw_path[37], *dir = NULL;
+ int i, j, ret = 0, pe;
+ int ipuesz, ifppsz, minifw = 0;
+
+ if (priv->version == EIP197D_MRVL)
+ dir = "eip197d";
+ else if (priv->version == EIP197B_MRVL ||
+ priv->version == EIP197_DEVBRD)
+ dir = "eip197b";
+ else
+ return -ENODEV;
+
+retry_fw:
+ for (i = 0; i < FW_NB; i++) {
+ snprintf(fw_path, 37, "inside-secure/%s/%s", dir, fw_name[i]);
+ ret = firmware_request_nowarn(&fw[i], fw_path, priv->dev);
+ if (ret) {
+ if (minifw || priv->version != EIP197B_MRVL)
+ goto release_fw;
+
+ /* Fallback to the old firmware location for the
+ * EIP197b.
+ */
+ ret = firmware_request_nowarn(&fw[i], fw_name[i],
+ priv->dev);
+ if (ret)
+ goto release_fw;
+ }
+ }
+
+ eip197_init_firmware(priv);
+
+ ifppsz = eip197_write_firmware(priv, fw[FW_IFPP]);
+
+ /* Enable access to IPUE program memories */
+ for (pe = 0; pe < priv->config.pes; pe++)
+ writel(EIP197_PE_ICE_RAM_CTRL_PUE_PROG_EN,
+ EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
+
+ ipuesz = eip197_write_firmware(priv, fw[FW_IPUE]);
+
+ if (eip197_start_firmware(priv, ipuesz, ifppsz, minifw)) {
+ dev_dbg(priv->dev, "Firmware loaded successfully\n");
+ return 0;
+ }
+
+ ret = -ENODEV;
+
+release_fw:
+ for (j = 0; j < i; j++)
+ release_firmware(fw[j]);
+
+ if (!minifw) {
+ /* Retry with minifw path */
+ dev_dbg(priv->dev, "Firmware set not (fully) present or init failed, falling back to BCLA mode\n");
+ dir = "eip197_minifw";
+ minifw = 1;
+ goto retry_fw;
+ }
+
+ dev_dbg(priv->dev, "Firmware load failed.\n");
+
+ return ret;
+}
+
+static int safexcel_hw_setup_cdesc_rings(struct safexcel_crypto_priv *priv)
+{
+ u32 cd_size_rnd, val;
+ int i, cd_fetch_cnt;
+
+ cd_size_rnd = (priv->config.cd_size +
+ (BIT(priv->hwconfig.hwdataw) - 1)) >>
+ priv->hwconfig.hwdataw;
+ /* determine number of CD's we can fetch into the CD FIFO as 1 block */
+ if (priv->flags & SAFEXCEL_HW_EIP197) {
+ /* EIP197: try to fetch enough in 1 go to keep all pipes busy */
+ cd_fetch_cnt = (1 << priv->hwconfig.hwcfsize) / cd_size_rnd;
+ cd_fetch_cnt = min_t(uint, cd_fetch_cnt,
+ (priv->config.pes * EIP197_FETCH_DEPTH));
+ } else {
+ /* for the EIP97, just fetch all that fits minus 1 */
+ cd_fetch_cnt = ((1 << priv->hwconfig.hwcfsize) /
+ cd_size_rnd) - 1;
+ }
+ /*
+ * Since we're using command desc's way larger than formally specified,
+ * we need to check whether we can fit even 1 for low-end EIP196's!
+ */
+ if (!cd_fetch_cnt) {
+ dev_err(priv->dev, "Unable to fit even 1 command desc!\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < priv->config.rings; i++) {
+ /* ring base address */
+ writel(lower_32_bits(priv->ring[i].cdr.base_dma),
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
+ writel(upper_32_bits(priv->ring[i].cdr.base_dma),
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
+
+ writel(EIP197_xDR_DESC_MODE_64BIT | EIP197_CDR_DESC_MODE_ADCP |
+ (priv->config.cd_offset << 14) | priv->config.cd_size,
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE);
+ writel(((cd_fetch_cnt *
+ (cd_size_rnd << priv->hwconfig.hwdataw)) << 16) |
+ (cd_fetch_cnt * (priv->config.cd_offset / sizeof(u32))),
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG);
+
+ /* Configure DMA tx control */
+ val = EIP197_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS);
+ val |= EIP197_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS);
+ writel(val, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_DMA_CFG);
+
+ /* clear any pending interrupt */
+ writel(GENMASK(5, 0),
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_STAT);
+ }
+
+ return 0;
+}
+
+static int safexcel_hw_setup_rdesc_rings(struct safexcel_crypto_priv *priv)
+{
+ u32 rd_size_rnd, val;
+ int i, rd_fetch_cnt;
+
+ /* determine number of RD's we can fetch into the FIFO as one block */
+ rd_size_rnd = (EIP197_RD64_FETCH_SIZE +
+ (BIT(priv->hwconfig.hwdataw) - 1)) >>
+ priv->hwconfig.hwdataw;
+ if (priv->flags & SAFEXCEL_HW_EIP197) {
+ /* EIP197: try to fetch enough in 1 go to keep all pipes busy */
+ rd_fetch_cnt = (1 << priv->hwconfig.hwrfsize) / rd_size_rnd;
+ rd_fetch_cnt = min_t(uint, rd_fetch_cnt,
+ (priv->config.pes * EIP197_FETCH_DEPTH));
+ } else {
+ /* for the EIP97, just fetch all that fits minus 1 */
+ rd_fetch_cnt = ((1 << priv->hwconfig.hwrfsize) /
+ rd_size_rnd) - 1;
+ }
+
+ for (i = 0; i < priv->config.rings; i++) {
+ /* ring base address */
+ writel(lower_32_bits(priv->ring[i].rdr.base_dma),
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
+ writel(upper_32_bits(priv->ring[i].rdr.base_dma),
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
+
+ writel(EIP197_xDR_DESC_MODE_64BIT | (priv->config.rd_offset << 14) |
+ priv->config.rd_size,
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE);
+
+ writel(((rd_fetch_cnt *
+ (rd_size_rnd << priv->hwconfig.hwdataw)) << 16) |
+ (rd_fetch_cnt * (priv->config.rd_offset / sizeof(u32))),
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG);
+
+ /* Configure DMA tx control */
+ val = EIP197_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS);
+ val |= EIP197_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS);
+ val |= EIP197_HIA_xDR_WR_RES_BUF | EIP197_HIA_xDR_WR_CTRL_BUF;
+ writel(val,
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DMA_CFG);
+
+ /* clear any pending interrupt */
+ writel(GENMASK(7, 0),
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_STAT);
+
+ /* enable ring interrupt */
+ val = readl(EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CTRL(i));
+ val |= EIP197_RDR_IRQ(i);
+ writel(val, EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CTRL(i));
+ }
+
+ return 0;
+}
+
+static int safexcel_hw_init(struct safexcel_crypto_priv *priv)
+{
+ u32 val;
+ int i, ret, pe, opbuflo, opbufhi;
+
+ dev_dbg(priv->dev, "HW init: using %d pipe(s) and %d ring(s)\n",
+ priv->config.pes, priv->config.rings);
+
+ /*
+ * For EIP197's only set maximum number of TX commands to 2^5 = 32
+ * Skip for the EIP97 as it does not have this field.
+ */
+ if (priv->flags & SAFEXCEL_HW_EIP197) {
+ val = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
+ val |= EIP197_MST_CTRL_TX_MAX_CMD(5);
+ writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
+ }
+
+ /* Configure wr/rd cache values */
+ writel(EIP197_MST_CTRL_RD_CACHE(RD_CACHE_4BITS) |
+ EIP197_MST_CTRL_WD_CACHE(WR_CACHE_4BITS),
+ EIP197_HIA_GEN_CFG(priv) + EIP197_MST_CTRL);
+
+ /* Interrupts reset */
+
+ /* Disable all global interrupts */
+ writel(0, EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ENABLE_CTRL);
+
+ /* Clear any pending interrupt */
+ writel(GENMASK(31, 0), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK);
+
+ /* Processing Engine configuration */
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ /* Data Fetch Engine configuration */
+
+ /* Reset all DFE threads */
+ writel(EIP197_DxE_THR_CTRL_RESET_PE,
+ EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe));
+
+ if (priv->flags & EIP197_PE_ARB)
+ /* Reset HIA input interface arbiter (if present) */
+ writel(EIP197_HIA_RA_PE_CTRL_RESET,
+ EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe));
+
+ /* DMA transfer size to use */
+ val = EIP197_HIA_DFE_CFG_DIS_DEBUG;
+ val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(6) |
+ EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(9);
+ val |= EIP197_HIA_DxE_CFG_MIN_CTRL_SIZE(6) |
+ EIP197_HIA_DxE_CFG_MAX_CTRL_SIZE(7);
+ val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(RD_CACHE_3BITS);
+ val |= EIP197_HIA_DxE_CFG_CTRL_CACHE_CTRL(RD_CACHE_3BITS);
+ writel(val, EIP197_HIA_DFE(priv) + EIP197_HIA_DFE_CFG(pe));
+
+ /* Leave the DFE threads reset state */
+ writel(0, EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe));
+
+ /* Configure the processing engine thresholds */
+ writel(EIP197_PE_IN_xBUF_THRES_MIN(6) |
+ EIP197_PE_IN_xBUF_THRES_MAX(9),
+ EIP197_PE(priv) + EIP197_PE_IN_DBUF_THRES(pe));
+ writel(EIP197_PE_IN_xBUF_THRES_MIN(6) |
+ EIP197_PE_IN_xBUF_THRES_MAX(7),
+ EIP197_PE(priv) + EIP197_PE_IN_TBUF_THRES(pe));
+
+ if (priv->flags & SAFEXCEL_HW_EIP197)
+ /* enable HIA input interface arbiter and rings */
+ writel(EIP197_HIA_RA_PE_CTRL_EN |
+ GENMASK(priv->config.rings - 1, 0),
+ EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe));
+
+ /* Data Store Engine configuration */
+
+ /* Reset all DSE threads */
+ writel(EIP197_DxE_THR_CTRL_RESET_PE,
+ EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe));
+
+ /* Wait for all DSE threads to complete */
+ while ((readl(EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_STAT(pe)) &
+ GENMASK(15, 12)) != GENMASK(15, 12))
+ ;
+
+ /* DMA transfer size to use */
+ if (priv->hwconfig.hwnumpes > 4) {
+ opbuflo = 9;
+ opbufhi = 10;
+ } else {
+ opbuflo = 7;
+ opbufhi = 8;
+ }
+ val = EIP197_HIA_DSE_CFG_DIS_DEBUG;
+ val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(opbuflo) |
+ EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(opbufhi);
+ val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(WR_CACHE_3BITS);
+ val |= EIP197_HIA_DSE_CFG_ALWAYS_BUFFERABLE;
+ /* FIXME: instability issues can occur for EIP97 but disabling
+ * it impacts performance.
+ */
+ if (priv->flags & SAFEXCEL_HW_EIP197)
+ val |= EIP197_HIA_DSE_CFG_EN_SINGLE_WR;
+ writel(val, EIP197_HIA_DSE(priv) + EIP197_HIA_DSE_CFG(pe));
+
+ /* Leave the DSE threads reset state */
+ writel(0, EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe));
+
+ /* Configure the processing engine thresholds */
+ writel(EIP197_PE_OUT_DBUF_THRES_MIN(opbuflo) |
+ EIP197_PE_OUT_DBUF_THRES_MAX(opbufhi),
+ EIP197_PE(priv) + EIP197_PE_OUT_DBUF_THRES(pe));
+
+ /* Processing Engine configuration */
+
+ /* Token & context configuration */
+ val = EIP197_PE_EIP96_TOKEN_CTRL_CTX_UPDATES |
+ EIP197_PE_EIP96_TOKEN_CTRL_NO_TOKEN_WAIT |
+ EIP197_PE_EIP96_TOKEN_CTRL_ENABLE_TIMEOUT;
+ writel(val, EIP197_PE(priv) + EIP197_PE_EIP96_TOKEN_CTRL(pe));
+
+ /* H/W capabilities selection: just enable everything */
+ writel(EIP197_FUNCTION_ALL,
+ EIP197_PE(priv) + EIP197_PE_EIP96_FUNCTION_EN(pe));
+ writel(EIP197_FUNCTION_ALL,
+ EIP197_PE(priv) + EIP197_PE_EIP96_FUNCTION2_EN(pe));
+ }
+
+ /* Command Descriptor Rings prepare */
+ for (i = 0; i < priv->config.rings; i++) {
+ /* Clear interrupts for this ring */
+ writel(GENMASK(31, 0),
+ EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLE_CLR(i));
+
+ /* Disable external triggering */
+ writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG);
+
+ /* Clear the pending prepared counter */
+ writel(EIP197_xDR_PREP_CLR_COUNT,
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PREP_COUNT);
+
+ /* Clear the pending processed counter */
+ writel(EIP197_xDR_PROC_CLR_COUNT,
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_COUNT);
+
+ writel(0,
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PREP_PNTR);
+ writel(0,
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR);
+
+ writel((EIP197_DEFAULT_RING_SIZE * priv->config.cd_offset),
+ EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_SIZE);
+ }
+
+ /* Result Descriptor Ring prepare */
+ for (i = 0; i < priv->config.rings; i++) {
+ /* Disable external triggering*/
+ writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG);
+
+ /* Clear the pending prepared counter */
+ writel(EIP197_xDR_PREP_CLR_COUNT,
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PREP_COUNT);
+
+ /* Clear the pending processed counter */
+ writel(EIP197_xDR_PROC_CLR_COUNT,
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_COUNT);
+
+ writel(0,
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PREP_PNTR);
+ writel(0,
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR);
+
+ /* Ring size */
+ writel((EIP197_DEFAULT_RING_SIZE * priv->config.rd_offset),
+ EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_SIZE);
+ }
+
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ /* Enable command descriptor rings */
+ writel(EIP197_DxE_THR_CTRL_EN | GENMASK(priv->config.rings - 1, 0),
+ EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe));
+
+ /* Enable result descriptor rings */
+ writel(EIP197_DxE_THR_CTRL_EN | GENMASK(priv->config.rings - 1, 0),
+ EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe));
+ }
+
+ /* Clear any HIA interrupt */
+ writel(GENMASK(30, 20), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK);
+
+ if (priv->flags & EIP197_SIMPLE_TRC) {
+ writel(EIP197_STRC_CONFIG_INIT |
+ EIP197_STRC_CONFIG_LARGE_REC(EIP197_CS_TRC_REC_WC) |
+ EIP197_STRC_CONFIG_SMALL_REC(EIP197_CS_TRC_REC_WC),
+ priv->base + EIP197_STRC_CONFIG);
+ writel(EIP197_PE_EIP96_TOKEN_CTRL2_CTX_DONE,
+ EIP197_PE(priv) + EIP197_PE_EIP96_TOKEN_CTRL2(0));
+ } else if (priv->flags & SAFEXCEL_HW_EIP197) {
+ ret = eip197_trc_cache_init(priv);
+ if (ret)
+ return ret;
+ }
+
+ if (priv->flags & EIP197_ICE) {
+ ret = eip197_load_firmwares(priv);
+ if (ret)
+ return ret;
+ }
+
+ return safexcel_hw_setup_cdesc_rings(priv) ?:
+ safexcel_hw_setup_rdesc_rings(priv) ?:
+ 0;
+}
+
+/* Called with ring's lock taken */
+static void safexcel_try_push_requests(struct safexcel_crypto_priv *priv,
+ int ring)
+{
+ int coal = min_t(int, priv->ring[ring].requests, EIP197_MAX_BATCH_SZ);
+
+ if (!coal)
+ return;
+
+ /* Configure when we want an interrupt */
+ writel(EIP197_HIA_RDR_THRESH_PKT_MODE |
+ EIP197_HIA_RDR_THRESH_PROC_PKT(coal),
+ EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_THRESH);
+}
+
+void safexcel_dequeue(struct safexcel_crypto_priv *priv, int ring)
+{
+ struct crypto_async_request *req, *backlog;
+ struct safexcel_context *ctx;
+ int ret, nreq = 0, cdesc = 0, rdesc = 0, commands, results;
+
+ /* If a request wasn't properly dequeued because of a lack of resources,
+ * proceeded it first,
+ */
+ req = priv->ring[ring].req;
+ backlog = priv->ring[ring].backlog;
+ if (req)
+ goto handle_req;
+
+ while (true) {
+ spin_lock_bh(&priv->ring[ring].queue_lock);
+ backlog = crypto_get_backlog(&priv->ring[ring].queue);
+ req = crypto_dequeue_request(&priv->ring[ring].queue);
+ spin_unlock_bh(&priv->ring[ring].queue_lock);
+
+ if (!req) {
+ priv->ring[ring].req = NULL;
+ priv->ring[ring].backlog = NULL;
+ goto finalize;
+ }
+
+handle_req:
+ ctx = crypto_tfm_ctx(req->tfm);
+ ret = ctx->send(req, ring, &commands, &results);
+ if (ret)
+ goto request_failed;
+
+ if (backlog)
+ backlog->complete(backlog, -EINPROGRESS);
+
+ /* In case the send() helper did not issue any command to push
+ * to the engine because the input data was cached, continue to
+ * dequeue other requests as this is valid and not an error.
+ */
+ if (!commands && !results)
+ continue;
+
+ cdesc += commands;
+ rdesc += results;
+ nreq++;
+ }
+
+request_failed:
+ /* Not enough resources to handle all the requests. Bail out and save
+ * the request and the backlog for the next dequeue call (per-ring).
+ */
+ priv->ring[ring].req = req;
+ priv->ring[ring].backlog = backlog;
+
+finalize:
+ if (!nreq)
+ return;
+
+ spin_lock_bh(&priv->ring[ring].lock);
+
+ priv->ring[ring].requests += nreq;
+
+ if (!priv->ring[ring].busy) {
+ safexcel_try_push_requests(priv, ring);
+ priv->ring[ring].busy = true;
+ }
+
+ spin_unlock_bh(&priv->ring[ring].lock);
+
+ /* let the RDR know we have pending descriptors */
+ writel((rdesc * priv->config.rd_offset),
+ EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT);
+
+ /* let the CDR know we have pending descriptors */
+ writel((cdesc * priv->config.cd_offset),
+ EIP197_HIA_CDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT);
+}
+
+inline int safexcel_rdesc_check_errors(struct safexcel_crypto_priv *priv,
+ void *rdp)
+{
+ struct safexcel_result_desc *rdesc = rdp;
+ struct result_data_desc *result_data = rdp + priv->config.res_offset;
+
+ if (likely((!rdesc->last_seg) || /* Rest only valid if last seg! */
+ ((!rdesc->descriptor_overflow) &&
+ (!rdesc->buffer_overflow) &&
+ (!result_data->error_code))))
+ return 0;
+
+ if (rdesc->descriptor_overflow)
+ dev_err(priv->dev, "Descriptor overflow detected");
+
+ if (rdesc->buffer_overflow)
+ dev_err(priv->dev, "Buffer overflow detected");
+
+ if (result_data->error_code & 0x4066) {
+ /* Fatal error (bits 1,2,5,6 & 14) */
+ dev_err(priv->dev,
+ "result descriptor error (%x)",
+ result_data->error_code);
+
+ return -EIO;
+ } else if (result_data->error_code &
+ (BIT(7) | BIT(4) | BIT(3) | BIT(0))) {
+ /*
+ * Give priority over authentication fails:
+ * Blocksize, length & overflow errors,
+ * something wrong with the input!
+ */
+ return -EINVAL;
+ } else if (result_data->error_code & BIT(9)) {
+ /* Authentication failed */
+ return -EBADMSG;
+ }
+
+ /* All other non-fatal errors */
+ return -EINVAL;
+}
+
+inline void safexcel_rdr_req_set(struct safexcel_crypto_priv *priv,
+ int ring,
+ struct safexcel_result_desc *rdesc,
+ struct crypto_async_request *req)
+{
+ int i = safexcel_ring_rdr_rdesc_index(priv, ring, rdesc);
+
+ priv->ring[ring].rdr_req[i] = req;
+}
+
+inline struct crypto_async_request *
+safexcel_rdr_req_get(struct safexcel_crypto_priv *priv, int ring)
+{
+ int i = safexcel_ring_first_rdr_index(priv, ring);
+
+ return priv->ring[ring].rdr_req[i];
+}
+
+void safexcel_complete(struct safexcel_crypto_priv *priv, int ring)
+{
+ struct safexcel_command_desc *cdesc;
+
+ /* Acknowledge the command descriptors */
+ do {
+ cdesc = safexcel_ring_next_rptr(priv, &priv->ring[ring].cdr);
+ if (IS_ERR(cdesc)) {
+ dev_err(priv->dev,
+ "Could not retrieve the command descriptor\n");
+ return;
+ }
+ } while (!cdesc->last_seg);
+}
+
+void safexcel_inv_complete(struct crypto_async_request *req, int error)
+{
+ struct safexcel_inv_result *result = req->data;
+
+ if (error == -EINPROGRESS)
+ return;
+
+ result->error = error;
+ complete(&result->completion);
+}
+
+int safexcel_invalidate_cache(struct crypto_async_request *async,
+ struct safexcel_crypto_priv *priv,
+ dma_addr_t ctxr_dma, int ring)
+{
+ struct safexcel_command_desc *cdesc;
+ struct safexcel_result_desc *rdesc;
+ struct safexcel_token *dmmy;
+ int ret = 0;
+
+ /* Prepare command descriptor */
+ cdesc = safexcel_add_cdesc(priv, ring, true, true, 0, 0, 0, ctxr_dma,
+ &dmmy);
+ if (IS_ERR(cdesc))
+ return PTR_ERR(cdesc);
+
+ cdesc->control_data.type = EIP197_TYPE_EXTENDED;
+ cdesc->control_data.options = 0;
+ cdesc->control_data.context_lo &= ~EIP197_CONTEXT_SIZE_MASK;
+ cdesc->control_data.control0 = CONTEXT_CONTROL_INV_TR;
+
+ /* Prepare result descriptor */
+ rdesc = safexcel_add_rdesc(priv, ring, true, true, 0, 0);
+
+ if (IS_ERR(rdesc)) {
+ ret = PTR_ERR(rdesc);
+ goto cdesc_rollback;
+ }
+
+ safexcel_rdr_req_set(priv, ring, rdesc, async);
+
+ return ret;
+
+cdesc_rollback:
+ safexcel_ring_rollback_wptr(priv, &priv->ring[ring].cdr);
+
+ return ret;
+}
+
+static inline void safexcel_handle_result_descriptor(struct safexcel_crypto_priv *priv,
+ int ring)
+{
+ struct crypto_async_request *req;
+ struct safexcel_context *ctx;
+ int ret, i, nreq, ndesc, tot_descs, handled = 0;
+ bool should_complete;
+
+handle_results:
+ tot_descs = 0;
+
+ nreq = readl(EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT);
+ nreq >>= EIP197_xDR_PROC_xD_PKT_OFFSET;
+ nreq &= EIP197_xDR_PROC_xD_PKT_MASK;
+ if (!nreq)
+ goto requests_left;
+
+ for (i = 0; i < nreq; i++) {
+ req = safexcel_rdr_req_get(priv, ring);
+
+ ctx = crypto_tfm_ctx(req->tfm);
+ ndesc = ctx->handle_result(priv, ring, req,
+ &should_complete, &ret);
+ if (ndesc < 0) {
+ dev_err(priv->dev, "failed to handle result (%d)\n",
+ ndesc);
+ goto acknowledge;
+ }
+
+ if (should_complete) {
+ local_bh_disable();
+ req->complete(req, ret);
+ local_bh_enable();
+ }
+
+ tot_descs += ndesc;
+ handled++;
+ }
+
+acknowledge:
+ if (i)
+ writel(EIP197_xDR_PROC_xD_PKT(i) |
+ (tot_descs * priv->config.rd_offset),
+ EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT);
+
+ /* If the number of requests overflowed the counter, try to proceed more
+ * requests.
+ */
+ if (nreq == EIP197_xDR_PROC_xD_PKT_MASK)
+ goto handle_results;
+
+requests_left:
+ spin_lock_bh(&priv->ring[ring].lock);
+
+ priv->ring[ring].requests -= handled;
+ safexcel_try_push_requests(priv, ring);
+
+ if (!priv->ring[ring].requests)
+ priv->ring[ring].busy = false;
+
+ spin_unlock_bh(&priv->ring[ring].lock);
+}
+
+static void safexcel_dequeue_work(struct work_struct *work)
+{
+ struct safexcel_work_data *data =
+ container_of(work, struct safexcel_work_data, work);
+
+ safexcel_dequeue(data->priv, data->ring);
+}
+
+struct safexcel_ring_irq_data {
+ struct safexcel_crypto_priv *priv;
+ int ring;
+};
+
+static irqreturn_t safexcel_irq_ring(int irq, void *data)
+{
+ struct safexcel_ring_irq_data *irq_data = data;
+ struct safexcel_crypto_priv *priv = irq_data->priv;
+ int ring = irq_data->ring, rc = IRQ_NONE;
+ u32 status, stat;
+
+ status = readl(EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ENABLED_STAT(ring));
+ if (!status)
+ return rc;
+
+ /* RDR interrupts */
+ if (status & EIP197_RDR_IRQ(ring)) {
+ stat = readl(EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_STAT);
+
+ if (unlikely(stat & EIP197_xDR_ERR)) {
+ /*
+ * Fatal error, the RDR is unusable and must be
+ * reinitialized. This should not happen under
+ * normal circumstances.
+ */
+ dev_err(priv->dev, "RDR: fatal error.\n");
+ } else if (likely(stat & EIP197_xDR_THRESH)) {
+ rc = IRQ_WAKE_THREAD;
+ }
+
+ /* ACK the interrupts */
+ writel(stat & 0xff,
+ EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_STAT);
+ }
+
+ /* ACK the interrupts */
+ writel(status, EIP197_HIA_AIC_R(priv) + EIP197_HIA_AIC_R_ACK(ring));
+
+ return rc;
+}
+
+static irqreturn_t safexcel_irq_ring_thread(int irq, void *data)
+{
+ struct safexcel_ring_irq_data *irq_data = data;
+ struct safexcel_crypto_priv *priv = irq_data->priv;
+ int ring = irq_data->ring;
+
+ safexcel_handle_result_descriptor(priv, ring);
+
+ queue_work(priv->ring[ring].workqueue,
+ &priv->ring[ring].work_data.work);
+
+ return IRQ_HANDLED;
+}
+
+static int safexcel_request_ring_irq(void *pdev, int irqid,
+ int is_pci_dev,
+ int ring_id,
+ irq_handler_t handler,
+ irq_handler_t threaded_handler,
+ struct safexcel_ring_irq_data *ring_irq_priv)
+{
+ int ret, irq, cpu;
+ struct device *dev;
+
+ if (IS_ENABLED(CONFIG_PCI) && is_pci_dev) {
+ struct pci_dev *pci_pdev = pdev;
+
+ dev = &pci_pdev->dev;
+ irq = pci_irq_vector(pci_pdev, irqid);
+ if (irq < 0) {
+ dev_err(dev, "unable to get device MSI IRQ %d (err %d)\n",
+ irqid, irq);
+ return irq;
+ }
+ } else if (IS_ENABLED(CONFIG_OF)) {
+ struct platform_device *plf_pdev = pdev;
+ char irq_name[6] = {0}; /* "ringX\0" */
+
+ snprintf(irq_name, 6, "ring%d", irqid);
+ dev = &plf_pdev->dev;
+ irq = platform_get_irq_byname(plf_pdev, irq_name);
+
+ if (irq < 0)
+ return irq;
+ } else {
+ return -ENXIO;
+ }
+
+ ret = devm_request_threaded_irq(dev, irq, handler,
+ threaded_handler, IRQF_ONESHOT,
+ dev_name(dev), ring_irq_priv);
+ if (ret) {
+ dev_err(dev, "unable to request IRQ %d\n", irq);
+ return ret;
+ }
+
+ /* Set affinity */
+ cpu = cpumask_local_spread(ring_id, NUMA_NO_NODE);
+ irq_set_affinity_hint(irq, get_cpu_mask(cpu));
+
+ return irq;
+}
+
+static struct safexcel_alg_template *safexcel_algs[] = {
+ &safexcel_alg_ecb_des,
+ &safexcel_alg_cbc_des,
+ &safexcel_alg_ecb_des3_ede,
+ &safexcel_alg_cbc_des3_ede,
+ &safexcel_alg_ecb_aes,
+ &safexcel_alg_cbc_aes,
+ &safexcel_alg_cfb_aes,
+ &safexcel_alg_ofb_aes,
+ &safexcel_alg_ctr_aes,
+ &safexcel_alg_md5,
+ &safexcel_alg_sha1,
+ &safexcel_alg_sha224,
+ &safexcel_alg_sha256,
+ &safexcel_alg_sha384,
+ &safexcel_alg_sha512,
+ &safexcel_alg_hmac_md5,
+ &safexcel_alg_hmac_sha1,
+ &safexcel_alg_hmac_sha224,
+ &safexcel_alg_hmac_sha256,
+ &safexcel_alg_hmac_sha384,
+ &safexcel_alg_hmac_sha512,
+ &safexcel_alg_authenc_hmac_sha1_cbc_aes,
+ &safexcel_alg_authenc_hmac_sha224_cbc_aes,
+ &safexcel_alg_authenc_hmac_sha256_cbc_aes,
+ &safexcel_alg_authenc_hmac_sha384_cbc_aes,
+ &safexcel_alg_authenc_hmac_sha512_cbc_aes,
+ &safexcel_alg_authenc_hmac_sha1_cbc_des3_ede,
+ &safexcel_alg_authenc_hmac_sha1_ctr_aes,
+ &safexcel_alg_authenc_hmac_sha224_ctr_aes,
+ &safexcel_alg_authenc_hmac_sha256_ctr_aes,
+ &safexcel_alg_authenc_hmac_sha384_ctr_aes,
+ &safexcel_alg_authenc_hmac_sha512_ctr_aes,
+ &safexcel_alg_xts_aes,
+ &safexcel_alg_gcm,
+ &safexcel_alg_ccm,
+ &safexcel_alg_crc32,
+ &safexcel_alg_cbcmac,
+ &safexcel_alg_xcbcmac,
+ &safexcel_alg_cmac,
+ &safexcel_alg_chacha20,
+ &safexcel_alg_chachapoly,
+ &safexcel_alg_chachapoly_esp,
+ &safexcel_alg_sm3,
+ &safexcel_alg_hmac_sm3,
+ &safexcel_alg_ecb_sm4,
+ &safexcel_alg_cbc_sm4,
+ &safexcel_alg_ofb_sm4,
+ &safexcel_alg_cfb_sm4,
+ &safexcel_alg_ctr_sm4,
+ &safexcel_alg_authenc_hmac_sha1_cbc_sm4,
+ &safexcel_alg_authenc_hmac_sm3_cbc_sm4,
+ &safexcel_alg_authenc_hmac_sha1_ctr_sm4,
+ &safexcel_alg_authenc_hmac_sm3_ctr_sm4,
+ &safexcel_alg_sha3_224,
+ &safexcel_alg_sha3_256,
+ &safexcel_alg_sha3_384,
+ &safexcel_alg_sha3_512,
+ &safexcel_alg_hmac_sha3_224,
+ &safexcel_alg_hmac_sha3_256,
+ &safexcel_alg_hmac_sha3_384,
+ &safexcel_alg_hmac_sha3_512,
+ &safexcel_alg_authenc_hmac_sha1_cbc_des,
+ &safexcel_alg_authenc_hmac_sha256_cbc_des3_ede,
+ &safexcel_alg_authenc_hmac_sha224_cbc_des3_ede,
+ &safexcel_alg_authenc_hmac_sha512_cbc_des3_ede,
+ &safexcel_alg_authenc_hmac_sha384_cbc_des3_ede,
+ &safexcel_alg_authenc_hmac_sha256_cbc_des,
+ &safexcel_alg_authenc_hmac_sha224_cbc_des,
+ &safexcel_alg_authenc_hmac_sha512_cbc_des,
+ &safexcel_alg_authenc_hmac_sha384_cbc_des,
+ &safexcel_alg_rfc4106_gcm,
+ &safexcel_alg_rfc4543_gcm,
+ &safexcel_alg_rfc4309_ccm,
+};
+
+static int safexcel_register_algorithms(struct safexcel_crypto_priv *priv)
+{
+ int i, j, ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(safexcel_algs); i++) {
+ safexcel_algs[i]->priv = priv;
+
+ /* Do we have all required base algorithms available? */
+ if ((safexcel_algs[i]->algo_mask & priv->hwconfig.algo_flags) !=
+ safexcel_algs[i]->algo_mask)
+ /* No, so don't register this ciphersuite */
+ continue;
+
+ if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_SKCIPHER)
+ ret = crypto_register_skcipher(&safexcel_algs[i]->alg.skcipher);
+ else if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_AEAD)
+ ret = crypto_register_aead(&safexcel_algs[i]->alg.aead);
+ else
+ ret = crypto_register_ahash(&safexcel_algs[i]->alg.ahash);
+
+ if (ret)
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ for (j = 0; j < i; j++) {
+ /* Do we have all required base algorithms available? */
+ if ((safexcel_algs[j]->algo_mask & priv->hwconfig.algo_flags) !=
+ safexcel_algs[j]->algo_mask)
+ /* No, so don't unregister this ciphersuite */
+ continue;
+
+ if (safexcel_algs[j]->type == SAFEXCEL_ALG_TYPE_SKCIPHER)
+ crypto_unregister_skcipher(&safexcel_algs[j]->alg.skcipher);
+ else if (safexcel_algs[j]->type == SAFEXCEL_ALG_TYPE_AEAD)
+ crypto_unregister_aead(&safexcel_algs[j]->alg.aead);
+ else
+ crypto_unregister_ahash(&safexcel_algs[j]->alg.ahash);
+ }
+
+ return ret;
+}
+
+static void safexcel_unregister_algorithms(struct safexcel_crypto_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(safexcel_algs); i++) {
+ /* Do we have all required base algorithms available? */
+ if ((safexcel_algs[i]->algo_mask & priv->hwconfig.algo_flags) !=
+ safexcel_algs[i]->algo_mask)
+ /* No, so don't unregister this ciphersuite */
+ continue;
+
+ if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_SKCIPHER)
+ crypto_unregister_skcipher(&safexcel_algs[i]->alg.skcipher);
+ else if (safexcel_algs[i]->type == SAFEXCEL_ALG_TYPE_AEAD)
+ crypto_unregister_aead(&safexcel_algs[i]->alg.aead);
+ else
+ crypto_unregister_ahash(&safexcel_algs[i]->alg.ahash);
+ }
+}
+
+static void safexcel_configure(struct safexcel_crypto_priv *priv)
+{
+ u32 mask = BIT(priv->hwconfig.hwdataw) - 1;
+
+ priv->config.pes = priv->hwconfig.hwnumpes;
+ priv->config.rings = min_t(u32, priv->hwconfig.hwnumrings, max_rings);
+ /* Cannot currently support more rings than we have ring AICs! */
+ priv->config.rings = min_t(u32, priv->config.rings,
+ priv->hwconfig.hwnumraic);
+
+ priv->config.cd_size = EIP197_CD64_FETCH_SIZE;
+ priv->config.cd_offset = (priv->config.cd_size + mask) & ~mask;
+ priv->config.cdsh_offset = (EIP197_MAX_TOKENS + mask) & ~mask;
+
+ /* res token is behind the descr, but ofs must be rounded to buswdth */
+ priv->config.res_offset = (EIP197_RD64_FETCH_SIZE + mask) & ~mask;
+ /* now the size of the descr is this 1st part plus the result struct */
+ priv->config.rd_size = priv->config.res_offset +
+ EIP197_RD64_RESULT_SIZE;
+ priv->config.rd_offset = (priv->config.rd_size + mask) & ~mask;
+
+ /* convert dwords to bytes */
+ priv->config.cd_offset *= sizeof(u32);
+ priv->config.cdsh_offset *= sizeof(u32);
+ priv->config.rd_offset *= sizeof(u32);
+ priv->config.res_offset *= sizeof(u32);
+}
+
+static void safexcel_init_register_offsets(struct safexcel_crypto_priv *priv)
+{
+ struct safexcel_register_offsets *offsets = &priv->offsets;
+
+ if (priv->flags & SAFEXCEL_HW_EIP197) {
+ offsets->hia_aic = EIP197_HIA_AIC_BASE;
+ offsets->hia_aic_g = EIP197_HIA_AIC_G_BASE;
+ offsets->hia_aic_r = EIP197_HIA_AIC_R_BASE;
+ offsets->hia_aic_xdr = EIP197_HIA_AIC_xDR_BASE;
+ offsets->hia_dfe = EIP197_HIA_DFE_BASE;
+ offsets->hia_dfe_thr = EIP197_HIA_DFE_THR_BASE;
+ offsets->hia_dse = EIP197_HIA_DSE_BASE;
+ offsets->hia_dse_thr = EIP197_HIA_DSE_THR_BASE;
+ offsets->hia_gen_cfg = EIP197_HIA_GEN_CFG_BASE;
+ offsets->pe = EIP197_PE_BASE;
+ offsets->global = EIP197_GLOBAL_BASE;
+ } else {
+ offsets->hia_aic = EIP97_HIA_AIC_BASE;
+ offsets->hia_aic_g = EIP97_HIA_AIC_G_BASE;
+ offsets->hia_aic_r = EIP97_HIA_AIC_R_BASE;
+ offsets->hia_aic_xdr = EIP97_HIA_AIC_xDR_BASE;
+ offsets->hia_dfe = EIP97_HIA_DFE_BASE;
+ offsets->hia_dfe_thr = EIP97_HIA_DFE_THR_BASE;
+ offsets->hia_dse = EIP97_HIA_DSE_BASE;
+ offsets->hia_dse_thr = EIP97_HIA_DSE_THR_BASE;
+ offsets->hia_gen_cfg = EIP97_HIA_GEN_CFG_BASE;
+ offsets->pe = EIP97_PE_BASE;
+ offsets->global = EIP97_GLOBAL_BASE;
+ }
+}
+
+/*
+ * Generic part of probe routine, shared by platform and PCI driver
+ *
+ * Assumes IO resources have been mapped, private data mem has been allocated,
+ * clocks have been enabled, device pointer has been assigned etc.
+ *
+ */
+static int safexcel_probe_generic(void *pdev,
+ struct safexcel_crypto_priv *priv,
+ int is_pci_dev)
+{
+ struct device *dev = priv->dev;
+ u32 peid, version, mask, val, hiaopt, hwopt, peopt;
+ int i, ret, hwctg;
+
+ priv->context_pool = dmam_pool_create("safexcel-context", dev,
+ sizeof(struct safexcel_context_record),
+ 1, 0);
+ if (!priv->context_pool)
+ return -ENOMEM;
+
+ /*
+ * First try the EIP97 HIA version regs
+ * For the EIP197, this is guaranteed to NOT return any of the test
+ * values
+ */
+ version = readl(priv->base + EIP97_HIA_AIC_BASE + EIP197_HIA_VERSION);
+
+ mask = 0; /* do not swap */
+ if (EIP197_REG_LO16(version) == EIP197_HIA_VERSION_LE) {
+ priv->hwconfig.hiaver = EIP197_VERSION_MASK(version);
+ } else if (EIP197_REG_HI16(version) == EIP197_HIA_VERSION_BE) {
+ /* read back byte-swapped, so complement byte swap bits */
+ mask = EIP197_MST_CTRL_BYTE_SWAP_BITS;
+ priv->hwconfig.hiaver = EIP197_VERSION_SWAP(version);
+ } else {
+ /* So it wasn't an EIP97 ... maybe it's an EIP197? */
+ version = readl(priv->base + EIP197_HIA_AIC_BASE +
+ EIP197_HIA_VERSION);
+ if (EIP197_REG_LO16(version) == EIP197_HIA_VERSION_LE) {
+ priv->hwconfig.hiaver = EIP197_VERSION_MASK(version);
+ priv->flags |= SAFEXCEL_HW_EIP197;
+ } else if (EIP197_REG_HI16(version) ==
+ EIP197_HIA_VERSION_BE) {
+ /* read back byte-swapped, so complement swap bits */
+ mask = EIP197_MST_CTRL_BYTE_SWAP_BITS;
+ priv->hwconfig.hiaver = EIP197_VERSION_SWAP(version);
+ priv->flags |= SAFEXCEL_HW_EIP197;
+ } else {
+ return -ENODEV;
+ }
+ }
+
+ /* Now initialize the reg offsets based on the probing info so far */
+ safexcel_init_register_offsets(priv);
+
+ /*
+ * If the version was read byte-swapped, we need to flip the device
+ * swapping Keep in mind here, though, that what we write will also be
+ * byte-swapped ...
+ */
+ if (mask) {
+ val = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
+ val = val ^ (mask >> 24); /* toggle byte swap bits */
+ writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
+ }
+
+ /*
+ * We're not done probing yet! We may fall through to here if no HIA
+ * was found at all. So, with the endianness presumably correct now and
+ * the offsets setup, *really* probe for the EIP97/EIP197.
+ */
+ version = readl(EIP197_GLOBAL(priv) + EIP197_VERSION);
+ if (((priv->flags & SAFEXCEL_HW_EIP197) &&
+ (EIP197_REG_LO16(version) != EIP197_VERSION_LE) &&
+ (EIP197_REG_LO16(version) != EIP196_VERSION_LE)) ||
+ ((!(priv->flags & SAFEXCEL_HW_EIP197) &&
+ (EIP197_REG_LO16(version) != EIP97_VERSION_LE)))) {
+ /*
+ * We did not find the device that matched our initial probing
+ * (or our initial probing failed) Report appropriate error.
+ */
+ dev_err(priv->dev, "Probing for EIP97/EIP19x failed - no such device (read %08x)\n",
+ version);
+ return -ENODEV;
+ }
+
+ priv->hwconfig.hwver = EIP197_VERSION_MASK(version);
+ hwctg = version >> 28;
+ peid = version & 255;
+
+ /* Detect EIP206 processing pipe */
+ version = readl(EIP197_PE(priv) + + EIP197_PE_VERSION(0));
+ if (EIP197_REG_LO16(version) != EIP206_VERSION_LE) {
+ dev_err(priv->dev, "EIP%d: EIP206 not detected\n", peid);
+ return -ENODEV;
+ }
+ priv->hwconfig.ppver = EIP197_VERSION_MASK(version);
+
+ /* Detect EIP96 packet engine and version */
+ version = readl(EIP197_PE(priv) + EIP197_PE_EIP96_VERSION(0));
+ if (EIP197_REG_LO16(version) != EIP96_VERSION_LE) {
+ dev_err(dev, "EIP%d: EIP96 not detected.\n", peid);
+ return -ENODEV;
+ }
+ priv->hwconfig.pever = EIP197_VERSION_MASK(version);
+
+ hwopt = readl(EIP197_GLOBAL(priv) + EIP197_OPTIONS);
+ hiaopt = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_OPTIONS);
+
+ priv->hwconfig.icever = 0;
+ priv->hwconfig.ocever = 0;
+ priv->hwconfig.psever = 0;
+ if (priv->flags & SAFEXCEL_HW_EIP197) {
+ /* EIP197 */
+ peopt = readl(EIP197_PE(priv) + EIP197_PE_OPTIONS(0));
+
+ priv->hwconfig.hwdataw = (hiaopt >> EIP197_HWDATAW_OFFSET) &
+ EIP197_HWDATAW_MASK;
+ priv->hwconfig.hwcfsize = ((hiaopt >> EIP197_CFSIZE_OFFSET) &
+ EIP197_CFSIZE_MASK) +
+ EIP197_CFSIZE_ADJUST;
+ priv->hwconfig.hwrfsize = ((hiaopt >> EIP197_RFSIZE_OFFSET) &
+ EIP197_RFSIZE_MASK) +
+ EIP197_RFSIZE_ADJUST;
+ priv->hwconfig.hwnumpes = (hiaopt >> EIP197_N_PES_OFFSET) &
+ EIP197_N_PES_MASK;
+ priv->hwconfig.hwnumrings = (hiaopt >> EIP197_N_RINGS_OFFSET) &
+ EIP197_N_RINGS_MASK;
+ if (hiaopt & EIP197_HIA_OPT_HAS_PE_ARB)
+ priv->flags |= EIP197_PE_ARB;
+ if (EIP206_OPT_ICE_TYPE(peopt) == 1) {
+ priv->flags |= EIP197_ICE;
+ /* Detect ICE EIP207 class. engine and version */
+ version = readl(EIP197_PE(priv) +
+ EIP197_PE_ICE_VERSION(0));
+ if (EIP197_REG_LO16(version) != EIP207_VERSION_LE) {
+ dev_err(dev, "EIP%d: ICE EIP207 not detected.\n",
+ peid);
+ return -ENODEV;
+ }
+ priv->hwconfig.icever = EIP197_VERSION_MASK(version);
+ }
+ if (EIP206_OPT_OCE_TYPE(peopt) == 1) {
+ priv->flags |= EIP197_OCE;
+ /* Detect EIP96PP packet stream editor and version */
+ version = readl(EIP197_PE(priv) + EIP197_PE_PSE_VERSION(0));
+ if (EIP197_REG_LO16(version) != EIP96_VERSION_LE) {
+ dev_err(dev, "EIP%d: EIP96PP not detected.\n", peid);
+ return -ENODEV;
+ }
+ priv->hwconfig.psever = EIP197_VERSION_MASK(version);
+ /* Detect OCE EIP207 class. engine and version */
+ version = readl(EIP197_PE(priv) +
+ EIP197_PE_ICE_VERSION(0));
+ if (EIP197_REG_LO16(version) != EIP207_VERSION_LE) {
+ dev_err(dev, "EIP%d: OCE EIP207 not detected.\n",
+ peid);
+ return -ENODEV;
+ }
+ priv->hwconfig.ocever = EIP197_VERSION_MASK(version);
+ }
+ /* If not a full TRC, then assume simple TRC */
+ if (!(hwopt & EIP197_OPT_HAS_TRC))
+ priv->flags |= EIP197_SIMPLE_TRC;
+ /* EIP197 always has SOME form of TRC */
+ priv->flags |= EIP197_TRC_CACHE;
+ } else {
+ /* EIP97 */
+ priv->hwconfig.hwdataw = (hiaopt >> EIP197_HWDATAW_OFFSET) &
+ EIP97_HWDATAW_MASK;
+ priv->hwconfig.hwcfsize = (hiaopt >> EIP97_CFSIZE_OFFSET) &
+ EIP97_CFSIZE_MASK;
+ priv->hwconfig.hwrfsize = (hiaopt >> EIP97_RFSIZE_OFFSET) &
+ EIP97_RFSIZE_MASK;
+ priv->hwconfig.hwnumpes = 1; /* by definition */
+ priv->hwconfig.hwnumrings = (hiaopt >> EIP197_N_RINGS_OFFSET) &
+ EIP197_N_RINGS_MASK;
+ }
+
+ /* Scan for ring AIC's */
+ for (i = 0; i < EIP197_MAX_RING_AIC; i++) {
+ version = readl(EIP197_HIA_AIC_R(priv) +
+ EIP197_HIA_AIC_R_VERSION(i));
+ if (EIP197_REG_LO16(version) != EIP201_VERSION_LE)
+ break;
+ }
+ priv->hwconfig.hwnumraic = i;
+ /* Low-end EIP196 may not have any ring AIC's ... */
+ if (!priv->hwconfig.hwnumraic) {
+ dev_err(priv->dev, "No ring interrupt controller present!\n");
+ return -ENODEV;
+ }
+
+ /* Get supported algorithms from EIP96 transform engine */
+ priv->hwconfig.algo_flags = readl(EIP197_PE(priv) +
+ EIP197_PE_EIP96_OPTIONS(0));
+
+ /* Print single info line describing what we just detected */
+ dev_info(priv->dev, "EIP%d:%x(%d,%d,%d,%d)-HIA:%x(%d,%d,%d),PE:%x/%x(alg:%08x)/%x/%x/%x\n",
+ peid, priv->hwconfig.hwver, hwctg, priv->hwconfig.hwnumpes,
+ priv->hwconfig.hwnumrings, priv->hwconfig.hwnumraic,
+ priv->hwconfig.hiaver, priv->hwconfig.hwdataw,
+ priv->hwconfig.hwcfsize, priv->hwconfig.hwrfsize,
+ priv->hwconfig.ppver, priv->hwconfig.pever,
+ priv->hwconfig.algo_flags, priv->hwconfig.icever,
+ priv->hwconfig.ocever, priv->hwconfig.psever);
+
+ safexcel_configure(priv);
+
+ if (IS_ENABLED(CONFIG_PCI) && priv->version == EIP197_DEVBRD) {
+ /*
+ * Request MSI vectors for global + 1 per ring -
+ * or just 1 for older dev images
+ */
+ struct pci_dev *pci_pdev = pdev;
+
+ ret = pci_alloc_irq_vectors(pci_pdev,
+ priv->config.rings + 1,
+ priv->config.rings + 1,
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
+ if (ret < 0) {
+ dev_err(dev, "Failed to allocate PCI MSI interrupts\n");
+ return ret;
+ }
+ }
+
+ /* Register the ring IRQ handlers and configure the rings */
+ priv->ring = devm_kcalloc(dev, priv->config.rings,
+ sizeof(*priv->ring),
+ GFP_KERNEL);
+ if (!priv->ring)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->config.rings; i++) {
+ char wq_name[9] = {0};
+ int irq;
+ struct safexcel_ring_irq_data *ring_irq;
+
+ ret = safexcel_init_ring_descriptors(priv,
+ &priv->ring[i].cdr,
+ &priv->ring[i].rdr);
+ if (ret) {
+ dev_err(dev, "Failed to initialize rings\n");
+ goto err_cleanup_rings;
+ }
+
+ priv->ring[i].rdr_req = devm_kcalloc(dev,
+ EIP197_DEFAULT_RING_SIZE,
+ sizeof(*priv->ring[i].rdr_req),
+ GFP_KERNEL);
+ if (!priv->ring[i].rdr_req) {
+ ret = -ENOMEM;
+ goto err_cleanup_rings;
+ }
+
+ ring_irq = devm_kzalloc(dev, sizeof(*ring_irq), GFP_KERNEL);
+ if (!ring_irq) {
+ ret = -ENOMEM;
+ goto err_cleanup_rings;
+ }
+
+ ring_irq->priv = priv;
+ ring_irq->ring = i;
+
+ irq = safexcel_request_ring_irq(pdev,
+ EIP197_IRQ_NUMBER(i, is_pci_dev),
+ is_pci_dev,
+ i,
+ safexcel_irq_ring,
+ safexcel_irq_ring_thread,
+ ring_irq);
+ if (irq < 0) {
+ dev_err(dev, "Failed to get IRQ ID for ring %d\n", i);
+ ret = irq;
+ goto err_cleanup_rings;
+ }
+
+ priv->ring[i].irq = irq;
+ priv->ring[i].work_data.priv = priv;
+ priv->ring[i].work_data.ring = i;
+ INIT_WORK(&priv->ring[i].work_data.work,
+ safexcel_dequeue_work);
+
+ snprintf(wq_name, 9, "wq_ring%d", i);
+ priv->ring[i].workqueue =
+ create_singlethread_workqueue(wq_name);
+ if (!priv->ring[i].workqueue) {
+ ret = -ENOMEM;
+ goto err_cleanup_rings;
+ }
+
+ priv->ring[i].requests = 0;
+ priv->ring[i].busy = false;
+
+ crypto_init_queue(&priv->ring[i].queue,
+ EIP197_DEFAULT_RING_SIZE);
+
+ spin_lock_init(&priv->ring[i].lock);
+ spin_lock_init(&priv->ring[i].queue_lock);
+ }
+
+ atomic_set(&priv->ring_used, 0);
+
+ ret = safexcel_hw_init(priv);
+ if (ret) {
+ dev_err(dev, "HW init failed (%d)\n", ret);
+ goto err_cleanup_rings;
+ }
+
+ ret = safexcel_register_algorithms(priv);
+ if (ret) {
+ dev_err(dev, "Failed to register algorithms (%d)\n", ret);
+ goto err_cleanup_rings;
+ }
+
+ return 0;
+
+err_cleanup_rings:
+ for (i = 0; i < priv->config.rings; i++) {
+ if (priv->ring[i].irq)
+ irq_set_affinity_hint(priv->ring[i].irq, NULL);
+ if (priv->ring[i].workqueue)
+ destroy_workqueue(priv->ring[i].workqueue);
+ }
+
+ return ret;
+}
+
+static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->config.rings; i++) {
+ /* clear any pending interrupt */
+ writel(GENMASK(5, 0), EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_STAT);
+ writel(GENMASK(7, 0), EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_STAT);
+
+ /* Reset the CDR base address */
+ writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
+ writel(0, EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
+
+ /* Reset the RDR base address */
+ writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_LO);
+ writel(0, EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI);
+ }
+}
+
+/* for Device Tree platform driver */
+
+static int safexcel_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct safexcel_crypto_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->version = (enum safexcel_eip_version)of_device_get_match_data(dev);
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base)) {
+ dev_err(dev, "failed to get resource\n");
+ return PTR_ERR(priv->base);
+ }
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ ret = PTR_ERR_OR_ZERO(priv->clk);
+ /* The clock isn't mandatory */
+ if (ret != -ENOENT) {
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret) {
+ dev_err(dev, "unable to enable clk (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ priv->reg_clk = devm_clk_get(&pdev->dev, "reg");
+ ret = PTR_ERR_OR_ZERO(priv->reg_clk);
+ /* The clock isn't mandatory */
+ if (ret != -ENOENT) {
+ if (ret)
+ goto err_core_clk;
+
+ ret = clk_prepare_enable(priv->reg_clk);
+ if (ret) {
+ dev_err(dev, "unable to enable reg clk (%d)\n", ret);
+ goto err_core_clk;
+ }
+ }
+
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (ret)
+ goto err_reg_clk;
+
+ /* Generic EIP97/EIP197 device probing */
+ ret = safexcel_probe_generic(pdev, priv, 0);
+ if (ret)
+ goto err_reg_clk;
+
+ return 0;
+
+err_reg_clk:
+ clk_disable_unprepare(priv->reg_clk);
+err_core_clk:
+ clk_disable_unprepare(priv->clk);
+ return ret;
+}
+
+static int safexcel_remove(struct platform_device *pdev)
+{
+ struct safexcel_crypto_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ safexcel_unregister_algorithms(priv);
+ safexcel_hw_reset_rings(priv);
+
+ clk_disable_unprepare(priv->reg_clk);
+ clk_disable_unprepare(priv->clk);
+
+ for (i = 0; i < priv->config.rings; i++) {
+ irq_set_affinity_hint(priv->ring[i].irq, NULL);
+ destroy_workqueue(priv->ring[i].workqueue);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id safexcel_of_match_table[] = {
+ {
+ .compatible = "inside-secure,safexcel-eip97ies",
+ .data = (void *)EIP97IES_MRVL,
+ },
+ {
+ .compatible = "inside-secure,safexcel-eip197b",
+ .data = (void *)EIP197B_MRVL,
+ },
+ {
+ .compatible = "inside-secure,safexcel-eip197d",
+ .data = (void *)EIP197D_MRVL,
+ },
+ /* For backward compatibility and intended for generic use */
+ {
+ .compatible = "inside-secure,safexcel-eip97",
+ .data = (void *)EIP97IES_MRVL,
+ },
+ {
+ .compatible = "inside-secure,safexcel-eip197",
+ .data = (void *)EIP197B_MRVL,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, safexcel_of_match_table);
+
+static struct platform_driver crypto_safexcel = {
+ .probe = safexcel_probe,
+ .remove = safexcel_remove,
+ .driver = {
+ .name = "crypto-safexcel",
+ .of_match_table = safexcel_of_match_table,
+ },
+};
+
+/* PCIE devices - i.e. Inside Secure development boards */
+
+static int safexcel_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct safexcel_crypto_priv *priv;
+ void __iomem *pciebase;
+ int rc;
+ u32 val;
+
+ dev_dbg(dev, "Probing PCIE device: vendor %04x, device %04x, subv %04x, subdev %04x, ctxt %lx\n",
+ ent->vendor, ent->device, ent->subvendor,
+ ent->subdevice, ent->driver_data);
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->version = (enum safexcel_eip_version)ent->driver_data;
+
+ pci_set_drvdata(pdev, priv);
+
+ /* enable the device */
+ rc = pcim_enable_device(pdev);
+ if (rc) {
+ dev_err(dev, "Failed to enable PCI device\n");
+ return rc;
+ }
+
+ /* take ownership of PCI BAR0 */
+ rc = pcim_iomap_regions(pdev, 1, "crypto_safexcel");
+ if (rc) {
+ dev_err(dev, "Failed to map IO region for BAR0\n");
+ return rc;
+ }
+ priv->base = pcim_iomap_table(pdev)[0];
+
+ if (priv->version == EIP197_DEVBRD) {
+ dev_dbg(dev, "Device identified as FPGA based development board - applying HW reset\n");
+
+ rc = pcim_iomap_regions(pdev, 4, "crypto_safexcel");
+ if (rc) {
+ dev_err(dev, "Failed to map IO region for BAR4\n");
+ return rc;
+ }
+
+ pciebase = pcim_iomap_table(pdev)[2];
+ val = readl(pciebase + EIP197_XLX_IRQ_BLOCK_ID_ADDR);
+ if ((val >> 16) == EIP197_XLX_IRQ_BLOCK_ID_VALUE) {
+ dev_dbg(dev, "Detected Xilinx PCIE IRQ block version %d, multiple MSI support enabled\n",
+ (val & 0xff));
+
+ /* Setup MSI identity map mapping */
+ writel(EIP197_XLX_USER_VECT_LUT0_IDENT,
+ pciebase + EIP197_XLX_USER_VECT_LUT0_ADDR);
+ writel(EIP197_XLX_USER_VECT_LUT1_IDENT,
+ pciebase + EIP197_XLX_USER_VECT_LUT1_ADDR);
+ writel(EIP197_XLX_USER_VECT_LUT2_IDENT,
+ pciebase + EIP197_XLX_USER_VECT_LUT2_ADDR);
+ writel(EIP197_XLX_USER_VECT_LUT3_IDENT,
+ pciebase + EIP197_XLX_USER_VECT_LUT3_ADDR);
+
+ /* Enable all device interrupts */
+ writel(GENMASK(31, 0),
+ pciebase + EIP197_XLX_USER_INT_ENB_MSK);
+ } else {
+ dev_err(dev, "Unrecognised IRQ block identifier %x\n",
+ val);
+ return -ENODEV;
+ }
+
+ /* HW reset FPGA dev board */
+ /* assert reset */
+ writel(1, priv->base + EIP197_XLX_GPIO_BASE);
+ wmb(); /* maintain strict ordering for accesses here */
+ /* deassert reset */
+ writel(0, priv->base + EIP197_XLX_GPIO_BASE);
+ wmb(); /* maintain strict ordering for accesses here */
+ }
+
+ /* enable bus mastering */
+ pci_set_master(pdev);
+
+ /* Generic EIP97/EIP197 device probing */
+ rc = safexcel_probe_generic(pdev, priv, 1);
+ return rc;
+}
+
+static void safexcel_pci_remove(struct pci_dev *pdev)
+{
+ struct safexcel_crypto_priv *priv = pci_get_drvdata(pdev);
+ int i;
+
+ safexcel_unregister_algorithms(priv);
+
+ for (i = 0; i < priv->config.rings; i++)
+ destroy_workqueue(priv->ring[i].workqueue);
+
+ safexcel_hw_reset_rings(priv);
+}
+
+static const struct pci_device_id safexcel_pci_ids[] = {
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_XILINX, 0x9038,
+ 0x16ae, 0xc522),
+ .driver_data = EIP197_DEVBRD,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(pci, safexcel_pci_ids);
+
+static struct pci_driver safexcel_pci_driver = {
+ .name = "crypto-safexcel",
+ .id_table = safexcel_pci_ids,
+ .probe = safexcel_pci_probe,
+ .remove = safexcel_pci_remove,
+};
+
+static int __init safexcel_init(void)
+{
+ int ret;
+
+ /* Register PCI driver */
+ ret = pci_register_driver(&safexcel_pci_driver);
+
+ /* Register platform driver */
+ if (IS_ENABLED(CONFIG_OF) && !ret) {
+ ret = platform_driver_register(&crypto_safexcel);
+ if (ret)
+ pci_unregister_driver(&safexcel_pci_driver);
+ }
+
+ return ret;
+}
+
+static void __exit safexcel_exit(void)
+{
+ /* Unregister platform driver */
+ if (IS_ENABLED(CONFIG_OF))
+ platform_driver_unregister(&crypto_safexcel);
+
+ /* Unregister PCI driver if successfully registered before */
+ pci_unregister_driver(&safexcel_pci_driver);
+}
+
+module_init(safexcel_init);
+module_exit(safexcel_exit);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_AUTHOR("Ofer Heifetz <oferh@marvell.com>");
+MODULE_AUTHOR("Igal Liberman <igall@marvell.com>");
+MODULE_DESCRIPTION("Support for SafeXcel cryptographic engines: EIP97 & EIP197");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(CRYPTO_INTERNAL);
+
+MODULE_FIRMWARE("ifpp.bin");
+MODULE_FIRMWARE("ipue.bin");
+MODULE_FIRMWARE("inside-secure/eip197b/ifpp.bin");
+MODULE_FIRMWARE("inside-secure/eip197b/ipue.bin");
+MODULE_FIRMWARE("inside-secure/eip197d/ifpp.bin");
+MODULE_FIRMWARE("inside-secure/eip197d/ipue.bin");
+MODULE_FIRMWARE("inside-secure/eip197_minifw/ifpp.bin");
+MODULE_FIRMWARE("inside-secure/eip197_minifw/ipue.bin");