diff options
Diffstat (limited to 'drivers/crypto/nx/nx-842.h')
-rw-r--r-- | drivers/crypto/nx/nx-842.h | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/drivers/crypto/nx/nx-842.h b/drivers/crypto/nx/nx-842.h new file mode 100644 index 000000000..b66f19ac6 --- /dev/null +++ b/drivers/crypto/nx/nx-842.h @@ -0,0 +1,189 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __NX_842_H__ +#define __NX_842_H__ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/crypto.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <linux/ratelimit.h> + +/* Restrictions on Data Descriptor List (DDL) and Entry (DDE) buffers + * + * From NX P8 workbook, sec 4.9.1 "842 details" + * Each DDE buffer is 128 byte aligned + * Each DDE buffer size is a multiple of 32 bytes (except the last) + * The last DDE buffer size is a multiple of 8 bytes + */ +#define DDE_BUFFER_ALIGN (128) +#define DDE_BUFFER_SIZE_MULT (32) +#define DDE_BUFFER_LAST_MULT (8) + +/* Arbitrary DDL length limit + * Allows max buffer size of MAX-1 to MAX pages + * (depending on alignment) + */ +#define DDL_LEN_MAX (17) + +/* CCW 842 CI/FC masks + * NX P8 workbook, section 4.3.1, figure 4-6 + * "CI/FC Boundary by NX CT type" + */ +#define CCW_CI_842 (0x00003ff8) +#define CCW_FC_842 (0x00000007) + +/* CCW Function Codes (FC) for 842 + * NX P8 workbook, section 4.9, table 4-28 + * "Function Code Definitions for 842 Memory Compression" + */ +#define CCW_FC_842_COMP_NOCRC (0) +#define CCW_FC_842_COMP_CRC (1) +#define CCW_FC_842_DECOMP_NOCRC (2) +#define CCW_FC_842_DECOMP_CRC (3) +#define CCW_FC_842_MOVE (4) + +/* CSB CC Error Types for 842 + * NX P8 workbook, section 4.10.3, table 4-30 + * "Reported Error Types Summary Table" + */ +/* These are all duplicates of existing codes defined in icswx.h. */ +#define CSB_CC_TRANSLATION_DUP1 (80) +#define CSB_CC_TRANSLATION_DUP2 (82) +#define CSB_CC_TRANSLATION_DUP3 (84) +#define CSB_CC_TRANSLATION_DUP4 (86) +#define CSB_CC_TRANSLATION_DUP5 (92) +#define CSB_CC_TRANSLATION_DUP6 (94) +#define CSB_CC_PROTECTION_DUP1 (81) +#define CSB_CC_PROTECTION_DUP2 (83) +#define CSB_CC_PROTECTION_DUP3 (85) +#define CSB_CC_PROTECTION_DUP4 (87) +#define CSB_CC_PROTECTION_DUP5 (93) +#define CSB_CC_PROTECTION_DUP6 (95) +#define CSB_CC_RD_EXTERNAL_DUP1 (89) +#define CSB_CC_RD_EXTERNAL_DUP2 (90) +#define CSB_CC_RD_EXTERNAL_DUP3 (91) +/* These are specific to NX */ +/* 842 codes */ +#define CSB_CC_TPBC_GT_SPBC (64) /* no error, but >1 comp ratio */ +#define CSB_CC_CRC_MISMATCH (65) /* decomp crc mismatch */ +#define CSB_CC_TEMPL_INVALID (66) /* decomp invalid template value */ +#define CSB_CC_TEMPL_OVERFLOW (67) /* decomp template shows data after end */ +/* sym crypt codes */ +#define CSB_CC_DECRYPT_OVERFLOW (64) +/* asym crypt codes */ +#define CSB_CC_MINV_OVERFLOW (128) +/* + * HW error - Job did not finish in the maximum time allowed. + * Job terminated. + */ +#define CSB_CC_HW_EXPIRED_TIMER (224) +/* These are reserved for hypervisor use */ +#define CSB_CC_HYP_RESERVE_START (240) +#define CSB_CC_HYP_RESERVE_END (253) +#define CSB_CC_HYP_RESERVE_P9_END (251) +/* No valid interrupt server (P9 or later). */ +#define CSB_CC_HYP_RESERVE_NO_INTR_SERVER (252) +#define CSB_CC_HYP_NO_HW (254) +#define CSB_CC_HYP_HANG_ABORTED (255) + +/* CCB Completion Modes (CM) for 842 + * NX P8 workbook, section 4.3, figure 4-5 + * "CRB Details - Normal Cop_Req (CL=00, C=1)" + */ +#define CCB_CM_EXTRA_WRITE (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_STORE) +#define CCB_CM_INTERRUPT (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_INTERRUPT) + +#define LEN_ON_SIZE(pa, size) ((size) - ((pa) & ((size) - 1))) +#define LEN_ON_PAGE(pa) LEN_ON_SIZE(pa, PAGE_SIZE) + +static inline unsigned long nx842_get_pa(void *addr) +{ + if (!is_vmalloc_addr(addr)) + return __pa(addr); + + return page_to_phys(vmalloc_to_page(addr)) + offset_in_page(addr); +} + +/** + * This provides the driver's constraints. Different nx842 implementations + * may have varying requirements. The constraints are: + * @alignment: All buffers should be aligned to this + * @multiple: All buffer lengths should be a multiple of this + * @minimum: Buffer lengths must not be less than this amount + * @maximum: Buffer lengths must not be more than this amount + * + * The constraints apply to all buffers and lengths, both input and output, + * for both compression and decompression, except for the minimum which + * only applies to compression input and decompression output; the + * compressed data can be less than the minimum constraint. It can be + * assumed that compressed data will always adhere to the multiple + * constraint. + * + * The driver may succeed even if these constraints are violated; + * however the driver can return failure or suffer reduced performance + * if any constraint is not met. + */ +struct nx842_constraints { + int alignment; + int multiple; + int minimum; + int maximum; +}; + +struct nx842_driver { + char *name; + struct module *owner; + size_t workmem_size; + + struct nx842_constraints *constraints; + + int (*compress)(const unsigned char *in, unsigned int in_len, + unsigned char *out, unsigned int *out_len, + void *wrkmem); + int (*decompress)(const unsigned char *in, unsigned int in_len, + unsigned char *out, unsigned int *out_len, + void *wrkmem); +}; + +struct nx842_crypto_header_group { + __be16 padding; /* unused bytes at start of group */ + __be32 compressed_length; /* compressed bytes in group */ + __be32 uncompressed_length; /* bytes after decompression */ +} __packed; + +struct nx842_crypto_header { + __be16 magic; /* NX842_CRYPTO_MAGIC */ + __be16 ignore; /* decompressed end bytes to ignore */ + u8 groups; /* total groups in this header */ + struct nx842_crypto_header_group group[]; +} __packed; + +#define NX842_CRYPTO_GROUP_MAX (0x20) + +struct nx842_crypto_ctx { + spinlock_t lock; + + u8 *wmem; + u8 *sbounce, *dbounce; + + struct nx842_crypto_header header; + struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX]; + + struct nx842_driver *driver; +}; + +int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver); +void nx842_crypto_exit(struct crypto_tfm *tfm); +int nx842_crypto_compress(struct crypto_tfm *tfm, + const u8 *src, unsigned int slen, + u8 *dst, unsigned int *dlen); +int nx842_crypto_decompress(struct crypto_tfm *tfm, + const u8 *src, unsigned int slen, + u8 *dst, unsigned int *dlen); + +#endif /* __NX_842_H__ */ |