1 files changed, 107 insertions, 0 deletions
diff --git a/drivers/edac/amd8131_edac.h b/drivers/edac/amd8131_edac.h
new file mode 100644
index 000000000..5f362abda
--- /dev/null
+++ b/drivers/edac/amd8131_edac.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ * 		Benjamin Walsh <benjamin.walsh@windriver.com>
+ * 		Hu Yongqi <yongqi.hu@windriver.com>
+ */
+
+#ifndef _AMD8131_EDAC_H_
+#define _AMD8131_EDAC_H_
+
+#define DEVFN_PCIX_BRIDGE_NORTH_A	8
+#define DEVFN_PCIX_BRIDGE_NORTH_B	16
+#define DEVFN_PCIX_BRIDGE_SOUTH_A	24
+#define DEVFN_PCIX_BRIDGE_SOUTH_B	32
+
+/************************************************************
+ *	PCI-X Bridge Status and Command Register, DevA:0x04
+ ************************************************************/
+#define REG_STS_CMD	0x04
+enum sts_cmd_bits {
+	STS_CMD_SSE	= BIT(30),
+	STS_CMD_SERREN	= BIT(8)
+};
+
+/************************************************************
+ *	PCI-X Bridge Interrupt and Bridge Control Register,
+ ************************************************************/
+#define REG_INT_CTLR	0x3c
+enum int_ctlr_bits {
+	INT_CTLR_DTSE	= BIT(27),
+	INT_CTLR_DTS	= BIT(26),
+	INT_CTLR_SERR	= BIT(17),
+	INT_CTLR_PERR	= BIT(16)
+};
+
+/************************************************************
+ *	PCI-X Bridge Memory Base-Limit Register, DevA:0x1C
+ ************************************************************/
+#define REG_MEM_LIM	0x1c
+enum mem_limit_bits {
+	MEM_LIMIT_DPE 	= BIT(31),
+	MEM_LIMIT_RSE 	= BIT(30),
+	MEM_LIMIT_RMA 	= BIT(29),
+	MEM_LIMIT_RTA 	= BIT(28),
+	MEM_LIMIT_STA	= BIT(27),
+	MEM_LIMIT_MDPE	= BIT(24),
+	MEM_LIMIT_MASK	= MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA|
+				MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE
+};
+
+/************************************************************
+ *	Link Configuration And Control Register, side A
+ ************************************************************/
+#define REG_LNK_CTRL_A	0xc4
+
+/************************************************************
+ *	Link Configuration And Control Register, side B
+ ************************************************************/
+#define REG_LNK_CTRL_B  0xc8
+
+enum lnk_ctrl_bits {
+	LNK_CTRL_CRCERR_A	= BIT(9),
+	LNK_CTRL_CRCERR_B	= BIT(8),
+	LNK_CTRL_CRCFEN		= BIT(1)
+};
+
+enum pcix_bridge_inst {
+	NORTH_A = 0,
+	NORTH_B = 1,
+	SOUTH_A = 2,
+	SOUTH_B = 3,
+	NO_BRIDGE = 4
+};
+
+struct amd8131_dev_info {
+	int devfn;
+	enum pcix_bridge_inst inst;
+	struct pci_dev *dev;
+	int edac_idx;	/* pci device index */
+	char *ctl_name;
+	struct edac_pci_ctl_info *edac_dev;
+};
+
+/*
+ * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC
+ * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are
+ * four PCIX Bridges on ATCA-6101 altogether.
+ *
+ * These PCIX Bridges share the same PCI Device ID and are all of
+ * Function Zero, they could be discrimated by their pci_dev->devfn.
+ * They share the same set of init/check/exit methods, and their
+ * private structures are collected in the devices[] array.
+ */
+struct amd8131_info {
+	u16 err_dev;	/* PCI Device ID for AMD8131 APIC*/
+	struct amd8131_dev_info *devices;
+	void (*init)(struct amd8131_dev_info *dev_info);
+	void (*exit)(struct amd8131_dev_info *dev_info);
+	void (*check)(struct edac_pci_ctl_info *edac_dev);
+};
+
+#endif /* _AMD8131_EDAC_H_ */
+