1 files changed, 83 insertions, 0 deletions
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
new file mode 100644
index 000000000..ec00a6f70
--- /dev/null
+++ b/drivers/firewire/Kconfig
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "IEEE 1394 (FireWire) support"
+	depends on PCI || COMPILE_TEST
+	# firewire-core does not depend on PCI but is
+	# not useful without PCI controller driver
+
+config FIREWIRE
+	tristate "FireWire driver stack"
+	select CRC_ITU_T
+	help
+	  This is the new-generation IEEE 1394 (FireWire) driver stack
+	  a.k.a. Juju, a new implementation designed for robustness and
+	  simplicity.
+	  See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+	  for information about migration from the older Linux 1394 stack
+	  to the new driver stack.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called firewire-core.
+
+config FIREWIRE_OHCI
+	tristate "OHCI-1394 controllers"
+	depends on PCI && FIREWIRE && MMU
+	help
+	  Enable this driver if you have a FireWire controller based
+	  on the OHCI specification.  For all practical purposes, this
+	  is the only chipset in use, so say Y here.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-ohci.
+
+config FIREWIRE_SBP2
+	tristate "Storage devices (SBP-2 protocol)"
+	depends on FIREWIRE && SCSI
+	help
+	  This option enables you to use SBP-2 devices connected to a
+	  FireWire bus.  SBP-2 devices include storage devices like
+	  harddisks and DVD drives, also some other FireWire devices
+	  like scanners.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-sbp2.
+
+	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
+	  configuration section.
+
+config FIREWIRE_NET
+	tristate "IP networking over 1394"
+	depends on FIREWIRE && INET
+	help
+	  This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity
+	  with other implementations of RFC 2734/3146 as found on several
+	  operating systems.  Multicast support is currently limited.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-net.
+
+config FIREWIRE_NOSY
+	tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
+	depends on PCI
+	help
+	  Nosy is an IEEE 1394 packet sniffer that is used for protocol
+	  analysis and in development of IEEE 1394 drivers, applications,
+	  or firmwares.
+
+	  This driver lets you use a Texas Instruments PCILynx 1394 to PCI
+	  link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
+	  PCILynx is a nowadays very rare IEEE 1394 controller which is
+	  not OHCI 1394 compliant.
+
+	  The following cards are known to be based on PCILynx or PCILynx-2:
+	  IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
+	  (PCI card), Newer Technology FireWire 2 Go (CardBus card),
+	  Apple Power Mac G3 blue & white and G4 with PCI graphics
+	  (onboard controller).
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called nosy.  Source code of a userspace interface to nosy, called
+	  nosy-dump, can be found in tools/firewire/ of the kernel sources.
+
+	  If unsure, say N.
+
+endmenu