diff options
Diffstat (limited to 'drivers/gpio/gpio-brcmstb.c')
-rw-r--r-- | drivers/gpio/gpio-brcmstb.c | 768 |
1 files changed, 768 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c new file mode 100644 index 000000000..c55b35da6 --- /dev/null +++ b/drivers/gpio/gpio-brcmstb.c @@ -0,0 +1,768 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2015-2017 Broadcom + +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/module.h> +#include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/interrupt.h> + +enum gio_reg_index { + GIO_REG_ODEN = 0, + GIO_REG_DATA, + GIO_REG_IODIR, + GIO_REG_EC, + GIO_REG_EI, + GIO_REG_MASK, + GIO_REG_LEVEL, + GIO_REG_STAT, + NUMBER_OF_GIO_REGISTERS +}; + +#define GIO_BANK_SIZE (NUMBER_OF_GIO_REGISTERS * sizeof(u32)) +#define GIO_BANK_OFF(bank, off) (((bank) * GIO_BANK_SIZE) + (off * sizeof(u32))) +#define GIO_ODEN(bank) GIO_BANK_OFF(bank, GIO_REG_ODEN) +#define GIO_DATA(bank) GIO_BANK_OFF(bank, GIO_REG_DATA) +#define GIO_IODIR(bank) GIO_BANK_OFF(bank, GIO_REG_IODIR) +#define GIO_EC(bank) GIO_BANK_OFF(bank, GIO_REG_EC) +#define GIO_EI(bank) GIO_BANK_OFF(bank, GIO_REG_EI) +#define GIO_MASK(bank) GIO_BANK_OFF(bank, GIO_REG_MASK) +#define GIO_LEVEL(bank) GIO_BANK_OFF(bank, GIO_REG_LEVEL) +#define GIO_STAT(bank) GIO_BANK_OFF(bank, GIO_REG_STAT) + +struct brcmstb_gpio_bank { + struct list_head node; + int id; + struct gpio_chip gc; + struct brcmstb_gpio_priv *parent_priv; + u32 width; + u32 wake_active; + u32 saved_regs[GIO_REG_STAT]; /* Don't save and restore GIO_REG_STAT */ +}; + +struct brcmstb_gpio_priv { + struct list_head bank_list; + void __iomem *reg_base; + struct platform_device *pdev; + struct irq_domain *irq_domain; + struct irq_chip irq_chip; + int parent_irq; + int gpio_base; + int num_gpios; + int parent_wake_irq; +}; + +#define MAX_GPIO_PER_BANK 32 +#define GPIO_BANK(gpio) ((gpio) >> 5) +/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */ +#define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1)) + +static inline struct brcmstb_gpio_priv * +brcmstb_gpio_gc_to_priv(struct gpio_chip *gc) +{ + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + return bank->parent_priv; +} + +static unsigned long +__brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank) +{ + void __iomem *reg_base = bank->parent_priv->reg_base; + + return bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) & + bank->gc.read_reg(reg_base + GIO_MASK(bank->id)); +} + +static unsigned long +brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank) +{ + unsigned long status; + unsigned long flags; + + raw_spin_lock_irqsave(&bank->gc.bgpio_lock, flags); + status = __brcmstb_gpio_get_active_irqs(bank); + raw_spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); + + return status; +} + +static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq, + struct brcmstb_gpio_bank *bank) +{ + return hwirq - (bank->gc.base - bank->parent_priv->gpio_base); +} + +static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank, + unsigned int hwirq, bool enable) +{ + struct gpio_chip *gc = &bank->gc; + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(hwirq, bank)); + u32 imask; + unsigned long flags; + + raw_spin_lock_irqsave(&gc->bgpio_lock, flags); + imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id)); + if (enable) + imask |= mask; + else + imask &= ~mask; + gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask); + raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags); +} + +static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); + /* gc_offset is relative to this gpio_chip; want real offset */ + int hwirq = offset + (gc->base - priv->gpio_base); + + if (hwirq >= priv->num_gpios) + return -ENXIO; + return irq_create_mapping(priv->irq_domain, hwirq); +} + +/* -------------------- IRQ chip functions -------------------- */ + +static void brcmstb_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + + brcmstb_gpio_set_imask(bank, d->hwirq, false); +} + +static void brcmstb_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + + brcmstb_gpio_set_imask(bank, d->hwirq, true); +} + +static void brcmstb_gpio_irq_ack(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); + + gc->write_reg(priv->reg_base + GIO_STAT(bank->id), mask); +} + +static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); + u32 edge_insensitive, iedge_insensitive; + u32 edge_config, iedge_config; + u32 level, ilevel; + unsigned long flags; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + level = mask; + edge_config = 0; + edge_insensitive = 0; + break; + case IRQ_TYPE_LEVEL_HIGH: + level = mask; + edge_config = mask; + edge_insensitive = 0; + break; + case IRQ_TYPE_EDGE_FALLING: + level = 0; + edge_config = 0; + edge_insensitive = 0; + break; + case IRQ_TYPE_EDGE_RISING: + level = 0; + edge_config = mask; + edge_insensitive = 0; + break; + case IRQ_TYPE_EDGE_BOTH: + level = 0; + edge_config = 0; /* don't care, but want known value */ + edge_insensitive = mask; + break; + default: + return -EINVAL; + } + + raw_spin_lock_irqsave(&bank->gc.bgpio_lock, flags); + + iedge_config = bank->gc.read_reg(priv->reg_base + + GIO_EC(bank->id)) & ~mask; + iedge_insensitive = bank->gc.read_reg(priv->reg_base + + GIO_EI(bank->id)) & ~mask; + ilevel = bank->gc.read_reg(priv->reg_base + + GIO_LEVEL(bank->id)) & ~mask; + + bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id), + iedge_config | edge_config); + bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id), + iedge_insensitive | edge_insensitive); + bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id), + ilevel | level); + + raw_spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); + return 0; +} + +static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv, + unsigned int enable) +{ + int ret = 0; + + if (enable) + ret = enable_irq_wake(priv->parent_wake_irq); + else + ret = disable_irq_wake(priv->parent_wake_irq); + if (ret) + dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n", + enable ? "enable" : "disable"); + return ret; +} + +static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + struct brcmstb_gpio_priv *priv = bank->parent_priv; + u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); + + /* + * Do not do anything specific for now, suspend/resume callbacks will + * configure the interrupt mask appropriately + */ + if (enable) + bank->wake_active |= mask; + else + bank->wake_active &= ~mask; + + return brcmstb_gpio_priv_set_wake(priv, enable); +} + +static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data) +{ + struct brcmstb_gpio_priv *priv = data; + + if (!priv || irq != priv->parent_wake_irq) + return IRQ_NONE; + + /* Nothing to do */ + return IRQ_HANDLED; +} + +static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank) +{ + struct brcmstb_gpio_priv *priv = bank->parent_priv; + struct irq_domain *domain = priv->irq_domain; + int hwbase = bank->gc.base - priv->gpio_base; + unsigned long status; + + while ((status = brcmstb_gpio_get_active_irqs(bank))) { + unsigned int offset; + + for_each_set_bit(offset, &status, 32) { + if (offset >= bank->width) + dev_warn(&priv->pdev->dev, + "IRQ for invalid GPIO (bank=%d, offset=%d)\n", + bank->id, offset); + generic_handle_domain_irq(domain, hwbase + offset); + } + } +} + +/* Each UPG GIO block has one IRQ for all banks */ +static void brcmstb_gpio_irq_handler(struct irq_desc *desc) +{ + struct brcmstb_gpio_priv *priv = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + struct brcmstb_gpio_bank *bank; + + /* Interrupts weren't properly cleared during probe */ + BUG_ON(!priv || !chip); + + chained_irq_enter(chip, desc); + list_for_each_entry(bank, &priv->bank_list, node) + brcmstb_gpio_irq_bank_handler(bank); + chained_irq_exit(chip, desc); +} + +static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank( + struct brcmstb_gpio_priv *priv, irq_hw_number_t hwirq) +{ + struct brcmstb_gpio_bank *bank; + int i = 0; + + /* banks are in descending order */ + list_for_each_entry_reverse(bank, &priv->bank_list, node) { + i += bank->gc.ngpio; + if (hwirq < i) + return bank; + } + return NULL; +} + +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key brcmstb_gpio_irq_lock_class; +static struct lock_class_key brcmstb_gpio_irq_request_class; + + +static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct brcmstb_gpio_priv *priv = d->host_data; + struct brcmstb_gpio_bank *bank = + brcmstb_gpio_hwirq_to_bank(priv, hwirq); + struct platform_device *pdev = priv->pdev; + int ret; + + if (!bank) + return -EINVAL; + + dev_dbg(&pdev->dev, "Mapping irq %d for gpio line %d (bank %d)\n", + irq, (int)hwirq, bank->id); + ret = irq_set_chip_data(irq, &bank->gc); + if (ret < 0) + return ret; + irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class, + &brcmstb_gpio_irq_request_class); + irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq); + irq_set_noprobe(irq); + return 0; +} + +static void brcmstb_gpio_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops brcmstb_gpio_irq_domain_ops = { + .map = brcmstb_gpio_irq_map, + .unmap = brcmstb_gpio_irq_unmap, + .xlate = irq_domain_xlate_twocell, +}; + +/* Make sure that the number of banks matches up between properties */ +static int brcmstb_gpio_sanity_check_banks(struct device *dev, + struct device_node *np, struct resource *res) +{ + int res_num_banks = resource_size(res) / GIO_BANK_SIZE; + int num_banks = + of_property_count_u32_elems(np, "brcm,gpio-bank-widths"); + + if (res_num_banks != num_banks) { + dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n", + res_num_banks, num_banks); + return -EINVAL; + } else { + return 0; + } +} + +static int brcmstb_gpio_remove(struct platform_device *pdev) +{ + struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev); + struct brcmstb_gpio_bank *bank; + int offset, virq; + + if (priv->parent_irq > 0) + irq_set_chained_handler_and_data(priv->parent_irq, NULL, NULL); + + /* Remove all IRQ mappings and delete the domain */ + if (priv->irq_domain) { + for (offset = 0; offset < priv->num_gpios; offset++) { + virq = irq_find_mapping(priv->irq_domain, offset); + irq_dispose_mapping(virq); + } + irq_domain_remove(priv->irq_domain); + } + + /* + * You can lose return values below, but we report all errors, and it's + * more important to actually perform all of the steps. + */ + list_for_each_entry(bank, &priv->bank_list, node) + gpiochip_remove(&bank->gc); + + return 0; +} + +static int brcmstb_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); + struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); + int offset; + + if (gc->of_gpio_n_cells != 2) { + WARN_ON(1); + return -EINVAL; + } + + if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) + return -EINVAL; + + offset = gpiospec->args[0] - (gc->base - priv->gpio_base); + if (offset >= gc->ngpio || offset < 0) + return -EINVAL; + + if (unlikely(offset >= bank->width)) { + dev_warn_ratelimited(&priv->pdev->dev, + "Received request for invalid GPIO offset %d\n", + gpiospec->args[0]); + } + + if (flags) + *flags = gpiospec->args[1]; + + return offset; +} + +/* priv->parent_irq and priv->num_gpios must be set before calling */ +static int brcmstb_gpio_irq_setup(struct platform_device *pdev, + struct brcmstb_gpio_priv *priv) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int err; + + priv->irq_domain = + irq_domain_add_linear(np, priv->num_gpios, + &brcmstb_gpio_irq_domain_ops, + priv); + if (!priv->irq_domain) { + dev_err(dev, "Couldn't allocate IRQ domain\n"); + return -ENXIO; + } + + if (of_property_read_bool(np, "wakeup-source")) { + priv->parent_wake_irq = platform_get_irq(pdev, 1); + if (priv->parent_wake_irq < 0) { + priv->parent_wake_irq = 0; + dev_warn(dev, + "Couldn't get wake IRQ - GPIOs will not be able to wake from sleep"); + } else { + /* + * Set wakeup capability so we can process boot-time + * "wakeups" (e.g., from S5 cold boot) + */ + device_set_wakeup_capable(dev, true); + device_wakeup_enable(dev); + err = devm_request_irq(dev, priv->parent_wake_irq, + brcmstb_gpio_wake_irq_handler, + IRQF_SHARED, + "brcmstb-gpio-wake", priv); + + if (err < 0) { + dev_err(dev, "Couldn't request wake IRQ"); + goto out_free_domain; + } + } + } + + priv->irq_chip.name = dev_name(dev); + priv->irq_chip.irq_disable = brcmstb_gpio_irq_mask; + priv->irq_chip.irq_mask = brcmstb_gpio_irq_mask; + priv->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask; + priv->irq_chip.irq_ack = brcmstb_gpio_irq_ack; + priv->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type; + + if (priv->parent_wake_irq) + priv->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake; + + irq_set_chained_handler_and_data(priv->parent_irq, + brcmstb_gpio_irq_handler, priv); + irq_set_status_flags(priv->parent_irq, IRQ_DISABLE_UNLAZY); + + return 0; + +out_free_domain: + irq_domain_remove(priv->irq_domain); + + return err; +} + +static void brcmstb_gpio_bank_save(struct brcmstb_gpio_priv *priv, + struct brcmstb_gpio_bank *bank) +{ + struct gpio_chip *gc = &bank->gc; + unsigned int i; + + for (i = 0; i < GIO_REG_STAT; i++) + bank->saved_regs[i] = gc->read_reg(priv->reg_base + + GIO_BANK_OFF(bank->id, i)); +} + +static void brcmstb_gpio_quiesce(struct device *dev, bool save) +{ + struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev); + struct brcmstb_gpio_bank *bank; + struct gpio_chip *gc; + u32 imask; + + /* disable non-wake interrupt */ + if (priv->parent_irq >= 0) + disable_irq(priv->parent_irq); + + list_for_each_entry(bank, &priv->bank_list, node) { + gc = &bank->gc; + + if (save) + brcmstb_gpio_bank_save(priv, bank); + + /* Unmask GPIOs which have been flagged as wake-up sources */ + if (priv->parent_wake_irq) + imask = bank->wake_active; + else + imask = 0; + gc->write_reg(priv->reg_base + GIO_MASK(bank->id), + imask); + } +} + +static void brcmstb_gpio_shutdown(struct platform_device *pdev) +{ + /* Enable GPIO for S5 cold boot */ + brcmstb_gpio_quiesce(&pdev->dev, false); +} + +#ifdef CONFIG_PM_SLEEP +static void brcmstb_gpio_bank_restore(struct brcmstb_gpio_priv *priv, + struct brcmstb_gpio_bank *bank) +{ + struct gpio_chip *gc = &bank->gc; + unsigned int i; + + for (i = 0; i < GIO_REG_STAT; i++) + gc->write_reg(priv->reg_base + GIO_BANK_OFF(bank->id, i), + bank->saved_regs[i]); +} + +static int brcmstb_gpio_suspend(struct device *dev) +{ + brcmstb_gpio_quiesce(dev, true); + return 0; +} + +static int brcmstb_gpio_resume(struct device *dev) +{ + struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev); + struct brcmstb_gpio_bank *bank; + bool need_wakeup_event = false; + + list_for_each_entry(bank, &priv->bank_list, node) { + need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank); + brcmstb_gpio_bank_restore(priv, bank); + } + + if (priv->parent_wake_irq && need_wakeup_event) + pm_wakeup_event(dev, 0); + + /* enable non-wake interrupt */ + if (priv->parent_irq >= 0) + enable_irq(priv->parent_irq); + + return 0; +} + +#else +#define brcmstb_gpio_suspend NULL +#define brcmstb_gpio_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops brcmstb_gpio_pm_ops = { + .suspend_noirq = brcmstb_gpio_suspend, + .resume_noirq = brcmstb_gpio_resume, +}; + +static int brcmstb_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + void __iomem *reg_base; + struct brcmstb_gpio_priv *priv; + struct resource *res; + struct property *prop; + const __be32 *p; + u32 bank_width; + int num_banks = 0; + int err; + static int gpio_base; + unsigned long flags = 0; + bool need_wakeup_event = false; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + INIT_LIST_HEAD(&priv->bank_list); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(dev, res); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + priv->gpio_base = gpio_base; + priv->reg_base = reg_base; + priv->pdev = pdev; + + if (of_property_read_bool(np, "interrupt-controller")) { + priv->parent_irq = platform_get_irq(pdev, 0); + if (priv->parent_irq <= 0) + return -ENOENT; + } else { + priv->parent_irq = -ENOENT; + } + + if (brcmstb_gpio_sanity_check_banks(dev, np, res)) + return -EINVAL; + + /* + * MIPS endianness is configured by boot strap, which also reverses all + * bus endianness (i.e., big-endian CPU + big endian bus ==> native + * endian I/O). + * + * Other architectures (e.g., ARM) either do not support big endian, or + * else leave I/O in little endian mode. + */ +#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) + flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; +#endif + + of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p, + bank_width) { + struct brcmstb_gpio_bank *bank; + struct gpio_chip *gc; + + /* + * If bank_width is 0, then there is an empty bank in the + * register block. Special handling for this case. + */ + if (bank_width == 0) { + dev_dbg(dev, "Width 0 found: Empty bank @ %d\n", + num_banks); + num_banks++; + gpio_base += MAX_GPIO_PER_BANK; + continue; + } + + bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); + if (!bank) { + err = -ENOMEM; + goto fail; + } + + bank->parent_priv = priv; + bank->id = num_banks; + if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) { + dev_err(dev, "Invalid bank width %d\n", bank_width); + err = -EINVAL; + goto fail; + } else { + bank->width = bank_width; + } + + /* + * Regs are 4 bytes wide, have data reg, no set/clear regs, + * and direction bits have 0 = output and 1 = input + */ + gc = &bank->gc; + err = bgpio_init(gc, dev, 4, + reg_base + GIO_DATA(bank->id), + NULL, NULL, NULL, + reg_base + GIO_IODIR(bank->id), flags); + if (err) { + dev_err(dev, "bgpio_init() failed\n"); + goto fail; + } + + gc->owner = THIS_MODULE; + gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", np); + if (!gc->label) { + err = -ENOMEM; + goto fail; + } + gc->base = gpio_base; + gc->of_gpio_n_cells = 2; + gc->of_xlate = brcmstb_gpio_of_xlate; + /* not all ngpio lines are valid, will use bank width later */ + gc->ngpio = MAX_GPIO_PER_BANK; + gc->offset = bank->id * MAX_GPIO_PER_BANK; + if (priv->parent_irq > 0) + gc->to_irq = brcmstb_gpio_to_irq; + + /* + * Mask all interrupts by default, since wakeup interrupts may + * be retained from S5 cold boot + */ + need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank); + gc->write_reg(reg_base + GIO_MASK(bank->id), 0); + + err = gpiochip_add_data(gc, bank); + if (err) { + dev_err(dev, "Could not add gpiochip for bank %d\n", + bank->id); + goto fail; + } + gpio_base += gc->ngpio; + + dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id, + gc->base, gc->ngpio, bank->width); + + /* Everything looks good, so add bank to list */ + list_add(&bank->node, &priv->bank_list); + + num_banks++; + } + + priv->num_gpios = gpio_base - priv->gpio_base; + if (priv->parent_irq > 0) { + err = brcmstb_gpio_irq_setup(pdev, priv); + if (err) + goto fail; + } + + if (priv->parent_wake_irq && need_wakeup_event) + pm_wakeup_event(dev, 0); + + return 0; + +fail: + (void) brcmstb_gpio_remove(pdev); + return err; +} + +static const struct of_device_id brcmstb_gpio_of_match[] = { + { .compatible = "brcm,brcmstb-gpio" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match); + +static struct platform_driver brcmstb_gpio_driver = { + .driver = { + .name = "brcmstb-gpio", + .of_match_table = brcmstb_gpio_of_match, + .pm = &brcmstb_gpio_pm_ops, + }, + .probe = brcmstb_gpio_probe, + .remove = brcmstb_gpio_remove, + .shutdown = brcmstb_gpio_shutdown, +}; +module_platform_driver(brcmstb_gpio_driver); + +MODULE_AUTHOR("Gregory Fong"); +MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO"); +MODULE_LICENSE("GPL v2"); |