diff options
Diffstat (limited to 'drivers/gpu/drm/gma500')
54 files changed, 23646 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig new file mode 100644 index 000000000..807b989e3 --- /dev/null +++ b/drivers/gpu/drm/gma500/Kconfig @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only +config DRM_GMA500 + tristate "Intel GMA500/600/3600/3650 KMS Framebuffer" + depends on DRM && PCI && X86 && MMU + select DRM_KMS_HELPER + # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915 + select ACPI_VIDEO if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select X86_PLATFORM_DEVICES if ACPI + select ACPI_WMI if ACPI + help + Say yes for an experimental 2D KMS framebuffer driver for the + Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and + Intel GMA3600/3650 (Cedar Trail). diff --git a/drivers/gpu/drm/gma500/Makefile b/drivers/gpu/drm/gma500/Makefile new file mode 100644 index 000000000..63012bf24 --- /dev/null +++ b/drivers/gpu/drm/gma500/Makefile @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# KMS driver for the GMA500 +# + +gma500_gfx-y += \ + backlight.o \ + cdv_device.o \ + cdv_intel_crt.o \ + cdv_intel_display.o \ + cdv_intel_dp.o \ + cdv_intel_hdmi.o \ + cdv_intel_lvds.o \ + framebuffer.o \ + gem.o \ + gma_device.o \ + gma_display.o \ + gtt.o \ + intel_bios.o \ + intel_gmbus.o \ + intel_i2c.o \ + mid_bios.o \ + mmu.o \ + oaktrail_device.o \ + oaktrail_crtc.o \ + oaktrail_hdmi.o \ + oaktrail_hdmi_i2c.o \ + oaktrail_lvds.o \ + oaktrail_lvds_i2c.o \ + power.o \ + psb_device.o \ + psb_drv.o \ + psb_intel_display.o \ + psb_intel_lvds.o \ + psb_intel_modes.o \ + psb_intel_sdvo.o \ + psb_lid.o \ + psb_irq.o + +gma500_gfx-$(CONFIG_ACPI) += opregion.o + +obj-$(CONFIG_DRM_GMA500) += gma500_gfx.o diff --git a/drivers/gpu/drm/gma500/backlight.c b/drivers/gpu/drm/gma500/backlight.c new file mode 100644 index 000000000..577a4987b --- /dev/null +++ b/drivers/gpu/drm/gma500/backlight.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GMA500 Backlight Interface + * + * Copyright (c) 2009-2011, Intel Corporation. + * + * Authors: Eric Knopp + */ + +#include <acpi/video.h> + +#include "psb_drv.h" +#include "psb_intel_reg.h" +#include "psb_intel_drv.h" +#include "intel_bios.h" +#include "power.h" + +void gma_backlight_enable(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + dev_priv->backlight_enabled = true; + dev_priv->ops->backlight_set(dev, dev_priv->backlight_level); +} + +void gma_backlight_disable(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + dev_priv->backlight_enabled = false; + dev_priv->ops->backlight_set(dev, 0); +} + +void gma_backlight_set(struct drm_device *dev, int v) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + dev_priv->backlight_level = v; + if (dev_priv->backlight_enabled) + dev_priv->ops->backlight_set(dev, v); +} + +static int gma_backlight_get_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(bd); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (dev_priv->ops->backlight_get) + return dev_priv->ops->backlight_get(dev); + + return dev_priv->backlight_level; +} + +static int gma_backlight_update_status(struct backlight_device *bd) +{ + struct drm_device *dev = bl_get_data(bd); + int level = backlight_get_brightness(bd); + + /* Percentage 1-100% being valid */ + if (level < 1) + level = 1; + + gma_backlight_set(dev, level); + return 0; +} + +static const struct backlight_ops gma_backlight_ops __maybe_unused = { + .get_brightness = gma_backlight_get_brightness, + .update_status = gma_backlight_update_status, +}; + +int gma_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct backlight_properties props __maybe_unused = {}; + int ret; + + dev_priv->backlight_enabled = true; + dev_priv->backlight_level = 100; + + ret = dev_priv->ops->backlight_init(dev); + if (ret) + return ret; + + if (!acpi_video_backlight_use_native()) { + drm_info(dev, "Skipping %s backlight registration\n", + dev_priv->ops->backlight_name); + return 0; + } + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + props.brightness = dev_priv->backlight_level; + props.max_brightness = PSB_MAX_BRIGHTNESS; + props.type = BACKLIGHT_RAW; + + dev_priv->backlight_device = + backlight_device_register(dev_priv->ops->backlight_name, + dev->dev, dev, + &gma_backlight_ops, &props); + if (IS_ERR(dev_priv->backlight_device)) + return PTR_ERR(dev_priv->backlight_device); +#endif + + return 0; +} + +void gma_backlight_exit(struct drm_device *dev) +{ +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (dev_priv->backlight_device) + backlight_device_unregister(dev_priv->backlight_device); +#endif +} diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c new file mode 100644 index 000000000..306559625 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_device.c @@ -0,0 +1,597 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#include <linux/delay.h> + +#include <drm/drm.h> + +#include "cdv_device.h" +#include "gma_device.h" +#include "intel_bios.h" +#include "psb_drv.h" +#include "psb_intel_reg.h" +#include "psb_reg.h" + +#define VGA_SR_INDEX 0x3c4 +#define VGA_SR_DATA 0x3c5 + +static void cdv_disable_vga(struct drm_device *dev) +{ + u8 sr1; + u32 vga_reg; + + vga_reg = VGACNTRL; + + outb(1, VGA_SR_INDEX); + sr1 = inb(VGA_SR_DATA); + outb(sr1 | 1<<5, VGA_SR_DATA); + udelay(300); + + REG_WRITE(vga_reg, VGA_DISP_DISABLE); + REG_READ(vga_reg); +} + +static int cdv_output_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + drm_mode_create_scaling_mode_property(dev); + + cdv_disable_vga(dev); + + cdv_intel_crt_init(dev, &dev_priv->mode_dev); + cdv_intel_lvds_init(dev, &dev_priv->mode_dev); + + /* These bits indicate HDMI not SDVO on CDV */ + if (REG_READ(SDVOB) & SDVO_DETECTED) { + cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB); + if (REG_READ(DP_B) & DP_DETECTED) + cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_B); + } + + if (REG_READ(SDVOC) & SDVO_DETECTED) { + cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC); + if (REG_READ(DP_C) & DP_DETECTED) + cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_C); + } + return 0; +} + +/* + * Cedartrail Backlght Interfaces + */ + +static int cdv_backlight_combination_mode(struct drm_device *dev) +{ + return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE; +} + +static u32 cdv_get_max_backlight(struct drm_device *dev) +{ + u32 max = REG_READ(BLC_PWM_CTL); + + if (max == 0) { + DRM_DEBUG_KMS("LVDS Panel PWM value is 0!\n"); + /* i915 does this, I believe which means that we should not + * smash PWM control as firmware will take control of it. */ + return 1; + } + + max >>= 16; + if (cdv_backlight_combination_mode(dev)) + max *= 0xff; + return max; +} + +static int cdv_get_brightness(struct drm_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; + + if (cdv_backlight_combination_mode(dev)) { + u8 lbpc; + + val &= ~1; + pci_read_config_byte(pdev, 0xF4, &lbpc); + val *= lbpc; + } + return (val * 100)/cdv_get_max_backlight(dev); +} + +static void cdv_set_brightness(struct drm_device *dev, int level) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 blc_pwm_ctl; + + level *= cdv_get_max_backlight(dev); + level /= 100; + + if (cdv_backlight_combination_mode(dev)) { + u32 max = cdv_get_max_backlight(dev); + u8 lbpc; + + lbpc = level * 0xfe / max + 1; + level /= lbpc; + + pci_write_config_byte(pdev, 0xF4, lbpc); + } + + blc_pwm_ctl = REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + REG_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); +} + +static int cdv_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + dev_priv->backlight_level = cdv_get_brightness(dev); + cdv_set_brightness(dev, dev_priv->backlight_level); + + return 0; +} + +/* + * Provide the Cedarview specific chip logic and low level methods + * for power management + * + * FIXME: we need to implement the apm/ospm base management bits + * for this and the MID devices. + */ + +static inline u32 CDV_MSG_READ32(int domain, uint port, uint offset) +{ + int mcr = (0x10<<24) | (port << 16) | (offset << 8); + uint32_t ret_val = 0; + struct pci_dev *pci_root = pci_get_domain_bus_and_slot(domain, 0, 0); + pci_write_config_dword(pci_root, 0xD0, mcr); + pci_read_config_dword(pci_root, 0xD4, &ret_val); + pci_dev_put(pci_root); + return ret_val; +} + +static inline void CDV_MSG_WRITE32(int domain, uint port, uint offset, + u32 value) +{ + int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0; + struct pci_dev *pci_root = pci_get_domain_bus_and_slot(domain, 0, 0); + pci_write_config_dword(pci_root, 0xD4, value); + pci_write_config_dword(pci_root, 0xD0, mcr); + pci_dev_put(pci_root); +} + +#define PSB_PM_SSC 0x20 +#define PSB_PM_SSS 0x30 +#define PSB_PWRGT_GFX_ON 0x02 +#define PSB_PWRGT_GFX_OFF 0x01 +#define PSB_PWRGT_GFX_D0 0x00 +#define PSB_PWRGT_GFX_D3 0x03 + +static void cdv_init_pm(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 pwr_cnt; + int domain = pci_domain_nr(pdev->bus); + int i; + + dev_priv->apm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT, + PSB_APMBA) & 0xFFFF; + dev_priv->ospm_base = CDV_MSG_READ32(domain, PSB_PUNIT_PORT, + PSB_OSPMBA) & 0xFFFF; + + /* Power status */ + pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); + + /* Enable the GPU */ + pwr_cnt &= ~PSB_PWRGT_GFX_MASK; + pwr_cnt |= PSB_PWRGT_GFX_ON; + outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); + + /* Wait for the GPU power */ + for (i = 0; i < 5; i++) { + u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); + if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0) + return; + udelay(10); + } + dev_err(dev->dev, "GPU: power management timed out.\n"); +} + +static void cdv_errata(struct drm_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + + /* Disable bonus launch. + * CPU and GPU competes for memory and display misses updates and + * flickers. Worst with dual core, dual displays. + * + * Fixes were done to Win 7 gfx driver to disable a feature called + * Bonus Launch to work around the issue, by degrading + * performance. + */ + CDV_MSG_WRITE32(pci_domain_nr(pdev->bus), 3, 0x30, 0x08027108); +} + +/** + * cdv_save_display_registers - save registers lost on suspend + * @dev: our DRM device + * + * Save the state we need in order to be able to restore the interface + * upon resume from suspend + */ +static int cdv_save_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct psb_save_area *regs = &dev_priv->regs; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + + dev_dbg(dev->dev, "Saving GPU registers.\n"); + + pci_read_config_byte(pdev, 0xF4, ®s->cdv.saveLBB); + + regs->cdv.saveDSPCLK_GATE_D = REG_READ(DSPCLK_GATE_D); + regs->cdv.saveRAMCLK_GATE_D = REG_READ(RAMCLK_GATE_D); + + regs->cdv.saveDSPARB = REG_READ(DSPARB); + regs->cdv.saveDSPFW[0] = REG_READ(DSPFW1); + regs->cdv.saveDSPFW[1] = REG_READ(DSPFW2); + regs->cdv.saveDSPFW[2] = REG_READ(DSPFW3); + regs->cdv.saveDSPFW[3] = REG_READ(DSPFW4); + regs->cdv.saveDSPFW[4] = REG_READ(DSPFW5); + regs->cdv.saveDSPFW[5] = REG_READ(DSPFW6); + + regs->cdv.saveADPA = REG_READ(ADPA); + + regs->cdv.savePP_CONTROL = REG_READ(PP_CONTROL); + regs->cdv.savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); + regs->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + regs->saveBLC_PWM_CTL2 = REG_READ(BLC_PWM_CTL2); + regs->cdv.saveLVDS = REG_READ(LVDS); + + regs->cdv.savePFIT_CONTROL = REG_READ(PFIT_CONTROL); + + regs->cdv.savePP_ON_DELAYS = REG_READ(PP_ON_DELAYS); + regs->cdv.savePP_OFF_DELAYS = REG_READ(PP_OFF_DELAYS); + regs->cdv.savePP_CYCLE = REG_READ(PP_CYCLE); + + regs->cdv.saveVGACNTRL = REG_READ(VGACNTRL); + + regs->cdv.saveIER = REG_READ(PSB_INT_ENABLE_R); + regs->cdv.saveIMR = REG_READ(PSB_INT_MASK_R); + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) + connector->funcs->dpms(connector, DRM_MODE_DPMS_OFF); + drm_connector_list_iter_end(&conn_iter); + + return 0; +} + +/** + * cdv_restore_display_registers - restore lost register state + * @dev: our DRM device + * + * Restore register state that was lost during suspend and resume. + * + * FIXME: review + */ +static int cdv_restore_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct psb_save_area *regs = &dev_priv->regs; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + u32 temp; + + pci_write_config_byte(pdev, 0xF4, regs->cdv.saveLBB); + + REG_WRITE(DSPCLK_GATE_D, regs->cdv.saveDSPCLK_GATE_D); + REG_WRITE(RAMCLK_GATE_D, regs->cdv.saveRAMCLK_GATE_D); + + /* BIOS does below anyway */ + REG_WRITE(DPIO_CFG, 0); + REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); + + temp = REG_READ(DPLL_A); + if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { + REG_WRITE(DPLL_A, temp | DPLL_SYNCLOCK_ENABLE); + REG_READ(DPLL_A); + } + + temp = REG_READ(DPLL_B); + if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { + REG_WRITE(DPLL_B, temp | DPLL_SYNCLOCK_ENABLE); + REG_READ(DPLL_B); + } + + udelay(500); + + REG_WRITE(DSPFW1, regs->cdv.saveDSPFW[0]); + REG_WRITE(DSPFW2, regs->cdv.saveDSPFW[1]); + REG_WRITE(DSPFW3, regs->cdv.saveDSPFW[2]); + REG_WRITE(DSPFW4, regs->cdv.saveDSPFW[3]); + REG_WRITE(DSPFW5, regs->cdv.saveDSPFW[4]); + REG_WRITE(DSPFW6, regs->cdv.saveDSPFW[5]); + + REG_WRITE(DSPARB, regs->cdv.saveDSPARB); + REG_WRITE(ADPA, regs->cdv.saveADPA); + + REG_WRITE(BLC_PWM_CTL2, regs->saveBLC_PWM_CTL2); + REG_WRITE(LVDS, regs->cdv.saveLVDS); + REG_WRITE(PFIT_CONTROL, regs->cdv.savePFIT_CONTROL); + REG_WRITE(PFIT_PGM_RATIOS, regs->cdv.savePFIT_PGM_RATIOS); + REG_WRITE(BLC_PWM_CTL, regs->saveBLC_PWM_CTL); + REG_WRITE(PP_ON_DELAYS, regs->cdv.savePP_ON_DELAYS); + REG_WRITE(PP_OFF_DELAYS, regs->cdv.savePP_OFF_DELAYS); + REG_WRITE(PP_CYCLE, regs->cdv.savePP_CYCLE); + REG_WRITE(PP_CONTROL, regs->cdv.savePP_CONTROL); + + REG_WRITE(VGACNTRL, regs->cdv.saveVGACNTRL); + + REG_WRITE(PSB_INT_ENABLE_R, regs->cdv.saveIER); + REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR); + + /* Fix arbitration bug */ + cdv_errata(dev); + + drm_mode_config_reset(dev); + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) + connector->funcs->dpms(connector, DRM_MODE_DPMS_ON); + drm_connector_list_iter_end(&conn_iter); + + /* Resume the modeset for every activated CRTC */ + drm_helper_resume_force_mode(dev); + return 0; +} + +static int cdv_power_down(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 pwr_cnt, pwr_mask, pwr_sts; + int tries = 5; + + pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); + pwr_cnt &= ~PSB_PWRGT_GFX_MASK; + pwr_cnt |= PSB_PWRGT_GFX_OFF; + pwr_mask = PSB_PWRGT_GFX_MASK; + + outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); + + while (tries--) { + pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); + if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D3) + return 0; + udelay(10); + } + return 0; +} + +static int cdv_power_up(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 pwr_cnt, pwr_mask, pwr_sts; + int tries = 5; + + pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); + pwr_cnt &= ~PSB_PWRGT_GFX_MASK; + pwr_cnt |= PSB_PWRGT_GFX_ON; + pwr_mask = PSB_PWRGT_GFX_MASK; + + outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); + + while (tries--) { + pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); + if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D0) + return 0; + udelay(10); + } + return 0; +} + +static void cdv_hotplug_work_func(struct work_struct *work) +{ + struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private, + hotplug_work); + struct drm_device *dev = &dev_priv->dev; + + /* Just fire off a uevent and let userspace tell us what to do */ + drm_helper_hpd_irq_event(dev); +} + +/* The core driver has received a hotplug IRQ. We are in IRQ context + so extract the needed information and kick off queued processing */ + +static int cdv_hotplug_event(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + schedule_work(&dev_priv->hotplug_work); + REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); + return 1; +} + +static void cdv_hotplug_enable(struct drm_device *dev, bool on) +{ + if (on) { + u32 hotplug = REG_READ(PORT_HOTPLUG_EN); + hotplug |= HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN | + HDMID_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN; + REG_WRITE(PORT_HOTPLUG_EN, hotplug); + } else { + REG_WRITE(PORT_HOTPLUG_EN, 0); + REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); + } +} + +static const char *force_audio_names[] = { + "off", + "auto", + "on", +}; + +void cdv_intel_attach_force_audio_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct drm_property *prop; + int i; + + prop = dev_priv->force_audio_property; + if (prop == NULL) { + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, + "audio", + ARRAY_SIZE(force_audio_names)); + if (prop == NULL) + return; + + for (i = 0; i < ARRAY_SIZE(force_audio_names); i++) + drm_property_add_enum(prop, i-1, force_audio_names[i]); + + dev_priv->force_audio_property = prop; + } + drm_object_attach_property(&connector->base, prop, 0); +} + + +static const char *broadcast_rgb_names[] = { + "Full", + "Limited 16:235", +}; + +void cdv_intel_attach_broadcast_rgb_property(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct drm_property *prop; + int i; + + prop = dev_priv->broadcast_rgb_property; + if (prop == NULL) { + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, + "Broadcast RGB", + ARRAY_SIZE(broadcast_rgb_names)); + if (prop == NULL) + return; + + for (i = 0; i < ARRAY_SIZE(broadcast_rgb_names); i++) + drm_property_add_enum(prop, i, broadcast_rgb_names[i]); + + dev_priv->broadcast_rgb_property = prop; + } + + drm_object_attach_property(&connector->base, prop, 0); +} + +/* Cedarview */ +static const struct psb_offset cdv_regmap[2] = { + { + .fp0 = FPA0, + .fp1 = FPA1, + .cntr = DSPACNTR, + .conf = PIPEACONF, + .src = PIPEASRC, + .dpll = DPLL_A, + .dpll_md = DPLL_A_MD, + .htotal = HTOTAL_A, + .hblank = HBLANK_A, + .hsync = HSYNC_A, + .vtotal = VTOTAL_A, + .vblank = VBLANK_A, + .vsync = VSYNC_A, + .stride = DSPASTRIDE, + .size = DSPASIZE, + .pos = DSPAPOS, + .base = DSPABASE, + .surf = DSPASURF, + .addr = DSPABASE, + .status = PIPEASTAT, + .linoff = DSPALINOFF, + .tileoff = DSPATILEOFF, + .palette = PALETTE_A, + }, + { + .fp0 = FPB0, + .fp1 = FPB1, + .cntr = DSPBCNTR, + .conf = PIPEBCONF, + .src = PIPEBSRC, + .dpll = DPLL_B, + .dpll_md = DPLL_B_MD, + .htotal = HTOTAL_B, + .hblank = HBLANK_B, + .hsync = HSYNC_B, + .vtotal = VTOTAL_B, + .vblank = VBLANK_B, + .vsync = VSYNC_B, + .stride = DSPBSTRIDE, + .size = DSPBSIZE, + .pos = DSPBPOS, + .base = DSPBBASE, + .surf = DSPBSURF, + .addr = DSPBBASE, + .status = PIPEBSTAT, + .linoff = DSPBLINOFF, + .tileoff = DSPBTILEOFF, + .palette = PALETTE_B, + } +}; + +static int cdv_chip_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + INIT_WORK(&dev_priv->hotplug_work, cdv_hotplug_work_func); + + dev_priv->use_msi = true; + dev_priv->regmap = cdv_regmap; + gma_get_core_freq(dev); + psb_intel_opregion_init(dev); + psb_intel_init_bios(dev); + cdv_hotplug_enable(dev, false); + return 0; +} + +/* CDV is much like Poulsbo but has MID like SGX offsets and PM */ + +const struct psb_ops cdv_chip_ops = { + .name = "GMA3600/3650", + .pipes = 2, + .crtcs = 2, + .hdmi_mask = (1 << 0) | (1 << 1), + .lvds_mask = (1 << 1), + .sdvo_mask = (1 << 0), + .cursor_needs_phys = 0, + .sgx_offset = MRST_SGX_OFFSET, + .chip_setup = cdv_chip_setup, + .errata = cdv_errata, + + .crtc_helper = &cdv_intel_helper_funcs, + .clock_funcs = &cdv_clock_funcs, + + .output_init = cdv_output_init, + .hotplug = cdv_hotplug_event, + .hotplug_enable = cdv_hotplug_enable, + + .backlight_init = cdv_backlight_init, + .backlight_get = cdv_get_brightness, + .backlight_set = cdv_set_brightness, + .backlight_name = "psb-bl", + + .init_pm = cdv_init_pm, + .save_regs = cdv_save_display_registers, + .restore_regs = cdv_restore_display_registers, + .save_crtc = gma_crtc_save, + .restore_crtc = gma_crtc_restore, + .power_down = cdv_power_down, + .power_up = cdv_power_up, + .update_wm = cdv_update_wm, + .disable_sr = cdv_disable_sr, +}; diff --git a/drivers/gpu/drm/gma500/cdv_device.h b/drivers/gpu/drm/gma500/cdv_device.h new file mode 100644 index 000000000..504d71738 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_device.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright © 2011 Intel Corporation + */ + +struct drm_crtc; +struct drm_device; +struct psb_intel_mode_device; + +extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs; +extern const struct gma_clock_funcs cdv_clock_funcs; +extern void cdv_intel_crt_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev); +extern void cdv_intel_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev); +extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, + int reg); +extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc); +extern void cdv_update_wm(struct drm_device *dev, struct drm_crtc *crtc); +extern void cdv_disable_sr(struct drm_device *dev); diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c new file mode 100644 index 000000000..7ff1e5141 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c @@ -0,0 +1,301 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/pm_runtime.h> + +#include <drm/drm_simple_kms_helper.h> + +#include "cdv_device.h" +#include "intel_bios.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + + +static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + u32 temp, reg; + reg = ADPA; + + temp = REG_READ(reg); + temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); + temp &= ~ADPA_DAC_ENABLE; + + switch (mode) { + case DRM_MODE_DPMS_ON: + temp |= ADPA_DAC_ENABLE; + break; + case DRM_MODE_DPMS_STANDBY: + temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; + break; + case DRM_MODE_DPMS_SUSPEND: + temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + case DRM_MODE_DPMS_OFF: + temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + } + + REG_WRITE(reg, temp); +} + +static enum drm_mode_status cdv_intel_crt_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + /* The lowest clock for CDV is 20000KHz */ + if (mode->clock < 20000) + return MODE_CLOCK_LOW; + + /* The max clock for CDV is 355 instead of 400 */ + if (mode->clock > 355000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static void cdv_intel_crt_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + + struct drm_device *dev = encoder->dev; + struct drm_crtc *crtc = encoder->crtc; + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int dpll_md_reg; + u32 adpa, dpll_md; + u32 adpa_reg; + + if (gma_crtc->pipe == 0) + dpll_md_reg = DPLL_A_MD; + else + dpll_md_reg = DPLL_B_MD; + + adpa_reg = ADPA; + + /* + * Disable separate mode multiplier used when cloning SDVO to CRT + * XXX this needs to be adjusted when we really are cloning + */ + { + dpll_md = REG_READ(dpll_md_reg); + REG_WRITE(dpll_md_reg, + dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); + } + + adpa = 0; + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + adpa |= ADPA_HSYNC_ACTIVE_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + adpa |= ADPA_VSYNC_ACTIVE_HIGH; + + if (gma_crtc->pipe == 0) + adpa |= ADPA_PIPE_A_SELECT; + else + adpa |= ADPA_PIPE_B_SELECT; + + REG_WRITE(adpa_reg, adpa); +} + + +/* + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence. + * + * \return true if CRT is connected. + * \return false if CRT is disconnected. + */ +static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector, + bool force) +{ + struct drm_device *dev = connector->dev; + u32 hotplug_en; + int i, tries = 0, ret = false; + u32 orig; + + /* + * On a CDV thep, CRT detect sequence need to be done twice + * to get a reliable result. + */ + tries = 2; + + orig = hotplug_en = REG_READ(PORT_HOTPLUG_EN); + hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK); + hotplug_en |= CRT_HOTPLUG_FORCE_DETECT; + + hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; + hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; + + for (i = 0; i < tries ; i++) { + unsigned long timeout; + /* turn on the FORCE_DETECT */ + REG_WRITE(PORT_HOTPLUG_EN, hotplug_en); + timeout = jiffies + msecs_to_jiffies(1000); + /* wait for FORCE_DETECT to go off */ + do { + if (!(REG_READ(PORT_HOTPLUG_EN) & + CRT_HOTPLUG_FORCE_DETECT)) + break; + msleep(1); + } while (time_after(timeout, jiffies)); + } + + if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) != + CRT_HOTPLUG_MONITOR_NONE) + ret = true; + + /* clear the interrupt we just generated, if any */ + REG_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS); + + /* and put the bits back */ + REG_WRITE(PORT_HOTPLUG_EN, orig); + return ret; +} + +static enum drm_connector_status cdv_intel_crt_detect( + struct drm_connector *connector, bool force) +{ + if (cdv_intel_crt_detect_hotplug(connector, force)) + return connector_status_connected; + else + return connector_status_disconnected; +} + +static void cdv_intel_crt_destroy(struct drm_connector *connector) +{ + struct gma_connector *gma_connector = to_gma_connector(connector); + struct gma_i2c_chan *ddc_bus = to_gma_i2c_chan(connector->ddc); + + gma_i2c_destroy(ddc_bus); + drm_connector_cleanup(connector); + kfree(gma_connector); +} + +static int cdv_intel_crt_get_modes(struct drm_connector *connector) +{ + return psb_intel_ddc_get_modes(connector, connector->ddc); +} + +static int cdv_intel_crt_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + return 0; +} + +/* + * Routines for controlling stuff on the analog port + */ + +static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = { + .dpms = cdv_intel_crt_dpms, + .prepare = gma_encoder_prepare, + .commit = gma_encoder_commit, + .mode_set = cdv_intel_crt_mode_set, +}; + +static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = cdv_intel_crt_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = cdv_intel_crt_destroy, + .set_property = cdv_intel_crt_set_property, +}; + +static const struct drm_connector_helper_funcs + cdv_intel_crt_connector_helper_funcs = { + .mode_valid = cdv_intel_crt_mode_valid, + .get_modes = cdv_intel_crt_get_modes, + .best_encoder = gma_best_encoder, +}; + +void cdv_intel_crt_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + + struct gma_connector *gma_connector; + struct gma_encoder *gma_encoder; + struct gma_i2c_chan *ddc_bus; + struct drm_connector *connector; + struct drm_encoder *encoder; + int ret; + + gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); + if (!gma_encoder) + return; + + gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); + if (!gma_connector) + goto err_free_encoder; + + /* Set up the DDC bus. */ + ddc_bus = gma_i2c_create(dev, GPIOA, "CRTDDC_A"); + if (!ddc_bus) { + dev_printk(KERN_ERR, dev->dev, "DDC bus registration failed.\n"); + goto err_free_connector; + } + + connector = &gma_connector->base; + connector->polled = DRM_CONNECTOR_POLL_HPD; + ret = drm_connector_init_with_ddc(dev, connector, + &cdv_intel_crt_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + &ddc_bus->base); + if (ret) + goto err_ddc_destroy; + + encoder = &gma_encoder->base; + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC); + if (ret) + goto err_connector_cleanup; + + gma_connector_attach_encoder(gma_connector, gma_encoder); + + gma_encoder->type = INTEL_OUTPUT_ANALOG; + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs); + drm_connector_helper_add(connector, + &cdv_intel_crt_connector_helper_funcs); + + return; + +err_connector_cleanup: + drm_connector_cleanup(&gma_connector->base); +err_ddc_destroy: + gma_i2c_destroy(ddc_bus); +err_free_connector: + kfree(gma_connector); +err_free_encoder: + kfree(gma_encoder); + return; +} diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c new file mode 100644 index 000000000..0c3ddcdc2 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -0,0 +1,973 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2006-2011 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/delay.h> +#include <linux/i2c.h> + +#include <drm/drm_crtc.h> + +#include "cdv_device.h" +#include "framebuffer.h" +#include "gma_display.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, struct gma_clock_t *best_clock); + + +#define CDV_LIMIT_SINGLE_LVDS_96 0 +#define CDV_LIMIT_SINGLE_LVDS_100 1 +#define CDV_LIMIT_DAC_HDMI_27 2 +#define CDV_LIMIT_DAC_HDMI_96 3 +#define CDV_LIMIT_DP_27 4 +#define CDV_LIMIT_DP_100 5 + +static const struct gma_limit_t cdv_intel_limits[] = { + { /* CDV_SINGLE_LVDS_96MHz */ + .dot = {.min = 20000, .max = 115500}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 160}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 158}, + .p = {.min = 28, .max = 140}, + .p1 = {.min = 2, .max = 10}, + .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, + .find_pll = gma_find_best_pll, + }, + { /* CDV_SINGLE_LVDS_100MHz */ + .dot = {.min = 20000, .max = 115500}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 160}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 158}, + .p = {.min = 28, .max = 140}, + .p1 = {.min = 2, .max = 10}, + /* The single-channel range is 25-112Mhz, and dual-channel + * is 80-224Mhz. Prefer single channel as much as possible. + */ + .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14}, + .find_pll = gma_find_best_pll, + }, + { /* CDV_DAC_HDMI_27MHz */ + .dot = {.min = 20000, .max = 400000}, + .vco = {.min = 1809000, .max = 3564000}, + .n = {.min = 1, .max = 1}, + .m = {.min = 67, .max = 132}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 65, .max = 130}, + .p = {.min = 5, .max = 90}, + .p1 = {.min = 1, .max = 9}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, + .find_pll = gma_find_best_pll, + }, + { /* CDV_DAC_HDMI_96MHz */ + .dot = {.min = 20000, .max = 400000}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 160}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 158}, + .p = {.min = 5, .max = 100}, + .p1 = {.min = 1, .max = 10}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5}, + .find_pll = gma_find_best_pll, + }, + { /* CDV_DP_27MHz */ + .dot = {.min = 160000, .max = 272000}, + .vco = {.min = 1809000, .max = 3564000}, + .n = {.min = 1, .max = 1}, + .m = {.min = 67, .max = 132}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 65, .max = 130}, + .p = {.min = 5, .max = 90}, + .p1 = {.min = 1, .max = 9}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10}, + .find_pll = cdv_intel_find_dp_pll, + }, + { /* CDV_DP_100MHz */ + .dot = {.min = 160000, .max = 272000}, + .vco = {.min = 1800000, .max = 3600000}, + .n = {.min = 2, .max = 6}, + .m = {.min = 60, .max = 164}, + .m1 = {.min = 0, .max = 0}, + .m2 = {.min = 58, .max = 162}, + .p = {.min = 5, .max = 100}, + .p1 = {.min = 1, .max = 10}, + .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10}, + .find_pll = cdv_intel_find_dp_pll, + } +}; + +#define _wait_for(COND, MS, W) ({ \ + unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ + int ret__ = 0; \ + while (!(COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + if (W && !in_dbg_master()) \ + msleep(W); \ + } \ + ret__; \ +}) + +#define wait_for(COND, MS) _wait_for(COND, MS, 1) + + +int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val) +{ + int ret; + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle before read\n"); + return ret; + } + + REG_WRITE(SB_ADDR, reg); + REG_WRITE(SB_PCKT, + SET_FIELD(SB_OPCODE_READ, SB_OPCODE) | + SET_FIELD(SB_DEST_DPLL, SB_DEST) | + SET_FIELD(0xf, SB_BYTE_ENABLE)); + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle after read\n"); + return ret; + } + + *val = REG_READ(SB_DATA); + + return 0; +} + +int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val) +{ + int ret; + static bool dpio_debug = true; + u32 temp; + + if (dpio_debug) { + if (cdv_sb_read(dev, reg, &temp) == 0) + DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp); + DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val); + } + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle before write\n"); + return ret; + } + + REG_WRITE(SB_ADDR, reg); + REG_WRITE(SB_DATA, val); + REG_WRITE(SB_PCKT, + SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) | + SET_FIELD(SB_DEST_DPLL, SB_DEST) | + SET_FIELD(0xf, SB_BYTE_ENABLE)); + + ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000); + if (ret) { + DRM_ERROR("timeout waiting for SB to idle after write\n"); + return ret; + } + + if (dpio_debug) { + if (cdv_sb_read(dev, reg, &temp) == 0) + DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp); + } + + return 0; +} + +/* Reset the DPIO configuration register. The BIOS does this at every + * mode set. + */ +void cdv_sb_reset(struct drm_device *dev) +{ + + REG_WRITE(DPIO_CFG, 0); + REG_READ(DPIO_CFG); + REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); +} + +/* Unlike most Intel display engines, on Cedarview the DPLL registers + * are behind this sideband bus. They must be programmed while the + * DPLL reference clock is on in the DPLL control register, but before + * the DPLL is enabled in the DPLL control register. + */ +static int +cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc, + struct gma_clock_t *clock, bool is_lvds, u32 ddi_select) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + u32 m, n_vco, p; + int ret = 0; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB; + u32 ref_value; + u32 lane_reg, lane_value; + + cdv_sb_reset(dev); + + REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS); + + udelay(100); + + /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */ + ref_value = 0x68A701; + + cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value); + + /* We don't know what the other fields of these regs are, so + * leave them in place. + */ + /* + * The BIT 14:13 of 0x8010/0x8030 is used to select the ref clk + * for the pipe A/B. Display spec 1.06 has wrong definition. + * Correct definition is like below: + * + * refclka mean use clock from same PLL + * + * if DPLLA sets 01 and DPLLB sets 01, they use clock from their pll + * + * if DPLLA sets 01 and DPLLB sets 02, both use clk from DPLLA + * + */ + ret = cdv_sb_read(dev, ref_sfr, &ref_value); + if (ret) + return ret; + ref_value &= ~(REF_CLK_MASK); + + /* use DPLL_A for pipeB on CRT/HDMI */ + if (pipe == 1 && !is_lvds && !(ddi_select & DP_MASK)) { + DRM_DEBUG_KMS("use DPLLA for pipe B\n"); + ref_value |= REF_CLK_DPLLA; + } else { + DRM_DEBUG_KMS("use their DPLL for pipe A/B\n"); + ref_value |= REF_CLK_DPLL; + } + ret = cdv_sb_write(dev, ref_sfr, ref_value); + if (ret) + return ret; + + ret = cdv_sb_read(dev, SB_M(pipe), &m); + if (ret) + return ret; + m &= ~SB_M_DIVIDER_MASK; + m |= ((clock->m2) << SB_M_DIVIDER_SHIFT); + ret = cdv_sb_write(dev, SB_M(pipe), m); + if (ret) + return ret; + + ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco); + if (ret) + return ret; + + /* Follow the BIOS to program the N_DIVIDER REG */ + n_vco &= 0xFFFF; + n_vco |= 0x107; + n_vco &= ~(SB_N_VCO_SEL_MASK | + SB_N_DIVIDER_MASK | + SB_N_CB_TUNE_MASK); + + n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT); + + if (clock->vco < 2250000) { + n_vco |= (2 << SB_N_CB_TUNE_SHIFT); + n_vco |= (0 << SB_N_VCO_SEL_SHIFT); + } else if (clock->vco < 2750000) { + n_vco |= (1 << SB_N_CB_TUNE_SHIFT); + n_vco |= (1 << SB_N_VCO_SEL_SHIFT); + } else if (clock->vco < 3300000) { + n_vco |= (0 << SB_N_CB_TUNE_SHIFT); + n_vco |= (2 << SB_N_VCO_SEL_SHIFT); + } else { + n_vco |= (0 << SB_N_CB_TUNE_SHIFT); + n_vco |= (3 << SB_N_VCO_SEL_SHIFT); + } + + ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco); + if (ret) + return ret; + + ret = cdv_sb_read(dev, SB_P(pipe), &p); + if (ret) + return ret; + p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK); + p |= SET_FIELD(clock->p1, SB_P1_DIVIDER); + switch (clock->p2) { + case 5: + p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER); + break; + case 10: + p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER); + break; + case 14: + p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER); + break; + case 7: + p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER); + break; + default: + DRM_ERROR("Bad P2 clock: %d\n", clock->p2); + return -EINVAL; + } + ret = cdv_sb_write(dev, SB_P(pipe), p); + if (ret) + return ret; + + if (ddi_select) { + if ((ddi_select & DDI_MASK) == DDI0_SELECT) { + lane_reg = PSB_LANE0; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + + lane_reg = PSB_LANE1; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + } else { + lane_reg = PSB_LANE2; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + + lane_reg = PSB_LANE3; + cdv_sb_read(dev, lane_reg, &lane_value); + lane_value &= ~(LANE_PLL_MASK); + lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe); + cdv_sb_write(dev, lane_reg, lane_value); + } + } + return 0; +} + +static const struct gma_limit_t *cdv_intel_limit(struct drm_crtc *crtc, + int refclk) +{ + const struct gma_limit_t *limit; + if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + /* + * Now only single-channel LVDS is supported on CDV. If it is + * incorrect, please add the dual-channel LVDS. + */ + if (refclk == 96000) + limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96]; + else + limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100]; + } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + gma_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) { + if (refclk == 27000) + limit = &cdv_intel_limits[CDV_LIMIT_DP_27]; + else + limit = &cdv_intel_limits[CDV_LIMIT_DP_100]; + } else { + if (refclk == 27000) + limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27]; + else + limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96]; + } + return limit; +} + +/* m1 is reserved as 0 in CDV, n is a ring counter */ +static void cdv_intel_clock(int refclk, struct gma_clock_t *clock) +{ + clock->m = clock->m2 + 2; + clock->p = clock->p1 * clock->p2; + clock->vco = (refclk * clock->m) / clock->n; + clock->dot = clock->vco / clock->p; +} + +static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, + struct gma_clock_t *best_clock) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct gma_clock_t clock; + + memset(&clock, 0, sizeof(clock)); + + switch (refclk) { + case 27000: + if (target < 200000) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 1; + clock.m1 = 0; + clock.m2 = 118; + } else { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 1; + clock.m1 = 0; + clock.m2 = 98; + } + break; + + case 100000: + if (target < 200000) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 5; + clock.m1 = 0; + clock.m2 = 160; + } else { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 5; + clock.m1 = 0; + clock.m2 = 133; + } + break; + + default: + return false; + } + + gma_crtc->clock_funcs->clock(refclk, &clock); + memcpy(best_clock, &clock, sizeof(struct gma_clock_t)); + return true; +} + +#define FIFO_PIPEA (1 << 0) +#define FIFO_PIPEB (1 << 1) + +static bool cdv_intel_pipe_enabled(struct drm_device *dev, int pipe) +{ + struct drm_crtc *crtc; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = NULL; + + crtc = dev_priv->pipe_to_crtc_mapping[pipe]; + gma_crtc = to_gma_crtc(crtc); + + if (crtc->primary->fb == NULL || !gma_crtc->active) + return false; + return true; +} + +void cdv_disable_sr(struct drm_device *dev) +{ + if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) { + + /* Disable self-refresh before adjust WM */ + REG_WRITE(FW_BLC_SELF, (REG_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN)); + REG_READ(FW_BLC_SELF); + + gma_wait_for_vblank(dev); + + /* Cedarview workaround to write ovelay plane, which force to leave + * MAX_FIFO state. + */ + REG_WRITE(OV_OVADD, 0/*dev_priv->ovl_offset*/); + REG_READ(OV_OVADD); + + gma_wait_for_vblank(dev); + } + +} + +void cdv_update_wm(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + + /* Is only one pipe enabled? */ + if (cdv_intel_pipe_enabled(dev, 0) ^ cdv_intel_pipe_enabled(dev, 1)) { + u32 fw; + + fw = REG_READ(DSPFW1); + fw &= ~DSP_FIFO_SR_WM_MASK; + fw |= (0x7e << DSP_FIFO_SR_WM_SHIFT); + fw &= ~CURSOR_B_FIFO_WM_MASK; + fw |= (0x4 << CURSOR_B_FIFO_WM_SHIFT); + REG_WRITE(DSPFW1, fw); + + fw = REG_READ(DSPFW2); + fw &= ~CURSOR_A_FIFO_WM_MASK; + fw |= (0x6 << CURSOR_A_FIFO_WM_SHIFT); + fw &= ~DSP_PLANE_C_FIFO_WM_MASK; + fw |= (0x8 << DSP_PLANE_C_FIFO_WM_SHIFT); + REG_WRITE(DSPFW2, fw); + + REG_WRITE(DSPFW3, 0x36000000); + + /* ignore FW4 */ + + /* Is pipe b lvds ? */ + if (gma_crtc->pipe == 1 && + gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + REG_WRITE(DSPFW5, 0x00040330); + } else { + fw = (3 << DSP_PLANE_B_FIFO_WM1_SHIFT) | + (4 << DSP_PLANE_A_FIFO_WM1_SHIFT) | + (3 << CURSOR_B_FIFO_WM1_SHIFT) | + (4 << CURSOR_FIFO_SR_WM1_SHIFT); + REG_WRITE(DSPFW5, fw); + } + + REG_WRITE(DSPFW6, 0x10); + + gma_wait_for_vblank(dev); + + /* enable self-refresh for single pipe active */ + REG_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + REG_READ(FW_BLC_SELF); + gma_wait_for_vblank(dev); + + } else { + + /* HW team suggested values... */ + REG_WRITE(DSPFW1, 0x3f880808); + REG_WRITE(DSPFW2, 0x0b020202); + REG_WRITE(DSPFW3, 0x24000000); + REG_WRITE(DSPFW4, 0x08030202); + REG_WRITE(DSPFW5, 0x01010101); + REG_WRITE(DSPFW6, 0x1d0); + + gma_wait_for_vblank(dev); + + dev_priv->ops->disable_sr(dev); + } +} + +/* + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int cdv_intel_panel_fitter_pipe(struct drm_device *dev) +{ + u32 pfit_control; + + pfit_control = REG_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + return (pfit_control >> 29) & 0x3; +} + +static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + int refclk; + struct gma_clock_t clock; + u32 dpll = 0, dspcntr, pipeconf; + bool ok; + bool is_lvds = false; + bool is_dp = false; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + const struct gma_limit_t *limit; + u32 ddi_select = 0; + bool is_edp = false; + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + struct gma_encoder *gma_encoder = + gma_attached_encoder(connector); + + if (!connector->encoder + || connector->encoder->crtc != crtc) + continue; + + ddi_select = gma_encoder->ddi_select; + switch (gma_encoder->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_ANALOG: + case INTEL_OUTPUT_HDMI: + break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; + case INTEL_OUTPUT_EDP: + is_edp = true; + break; + default: + drm_connector_list_iter_end(&conn_iter); + DRM_ERROR("invalid output type.\n"); + return 0; + } + + break; + } + drm_connector_list_iter_end(&conn_iter); + + if (dev_priv->dplla_96mhz) + /* low-end sku, 96/100 mhz */ + refclk = 96000; + else + /* high-end sku, 27/100 mhz */ + refclk = 27000; + if (is_dp || is_edp) { + /* + * Based on the spec the low-end SKU has only CRT/LVDS. So it is + * unnecessary to consider it for DP/eDP. + * On the high-end SKU, it will use the 27/100M reference clk + * for DP/eDP. When using SSC clock, the ref clk is 100MHz.Otherwise + * it will be 27MHz. From the VBIOS code it seems that the pipe A choose + * 27MHz for DP/eDP while the Pipe B chooses the 100MHz. + */ + if (pipe == 0) + refclk = 27000; + else + refclk = 100000; + } + + if (is_lvds && dev_priv->lvds_use_ssc) { + refclk = dev_priv->lvds_ssc_freq * 1000; + DRM_DEBUG_KMS("Use SSC reference clock %d Mhz\n", dev_priv->lvds_ssc_freq); + } + + drm_mode_debug_printmodeline(adjusted_mode); + + limit = gma_crtc->clock_funcs->limit(crtc, refclk); + + ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, + &clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d", + adjusted_mode->clock, clock.dot); + return 0; + } + + dpll = DPLL_VGA_MODE_DIS; + + if (is_dp || is_edp) { + cdv_intel_dp_set_m_n(crtc, mode, adjusted_mode); + } else { + REG_WRITE(PIPE_GMCH_DATA_M(pipe), 0); + REG_WRITE(PIPE_GMCH_DATA_N(pipe), 0); + REG_WRITE(PIPE_DP_LINK_M(pipe), 0); + REG_WRITE(PIPE_DP_LINK_N(pipe), 0); + } + + dpll |= DPLL_SYNCLOCK_ENABLE; +/* if (is_lvds) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; */ + /* dpll |= (2 << 11); */ + + /* setup pipeconf */ + pipeconf = REG_READ(map->conf); + + pipeconf &= ~(PIPE_BPC_MASK); + if (is_edp) { + switch (dev_priv->edp.bpp) { + case 24: + pipeconf |= PIPE_8BPC; + break; + case 18: + pipeconf |= PIPE_6BPC; + break; + case 30: + pipeconf |= PIPE_10BPC; + break; + default: + pipeconf |= PIPE_8BPC; + break; + } + } else if (is_lvds) { + /* the BPC will be 6 if it is 18-bit LVDS panel */ + if ((REG_READ(LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + pipeconf |= PIPE_8BPC; + else + pipeconf |= PIPE_6BPC; + } else + pipeconf |= PIPE_8BPC; + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + dspcntr |= DISPLAY_PLANE_ENABLE; + pipeconf |= PIPEACONF_ENABLE; + + REG_WRITE(map->dpll, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE); + REG_READ(map->dpll); + + cdv_dpll_set_clock_cdv(dev, crtc, &clock, is_lvds, ddi_select); + + udelay(150); + + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + u32 lvds = REG_READ(LVDS); + + lvds |= + LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | + LVDS_PIPEB_SELECT; + /* Set the B0-B3 data pairs corresponding to + * whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more + * thoroughly into how panels behave in the two modes. + */ + + REG_WRITE(LVDS, lvds); + REG_READ(LVDS); + } + + dpll |= DPLL_VCO_ENABLE; + + /* Disable the panel fitter if it was on our pipe */ + if (cdv_intel_panel_fitter_pipe(dev) == pipe) + REG_WRITE(PFIT_CONTROL, 0); + + DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + drm_mode_debug_printmodeline(mode); + + REG_WRITE(map->dpll, + (REG_READ(map->dpll) & ~DPLL_LOCK) | DPLL_VCO_ENABLE); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */ + + if (!(REG_READ(map->dpll) & DPLL_LOCK)) { + dev_err(dev->dev, "Failed to get DPLL lock\n"); + return -EBUSY; + } + + { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + REG_WRITE(map->dpll_md, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); + } + + REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. + */ + REG_WRITE(map->size, + ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + REG_WRITE(map->pos, 0); + REG_WRITE(map->src, + ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + REG_WRITE(map->conf, pipeconf); + REG_READ(map->conf); + + gma_wait_for_vblank(dev); + + REG_WRITE(map->cntr, dspcntr); + + /* Flush the plane changes */ + { + const struct drm_crtc_helper_funcs *crtc_funcs = + crtc->helper_private; + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + } + + gma_wait_for_vblank(dev); + + return 0; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ + +/* FIXME: why are we using this, should it be cdv_ in this tree ? */ + +static void i8xx_clock(int refclk, struct gma_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +/* Returns the clock of the currently programmed mode of the given pipe. */ +static int cdv_intel_crtc_clock_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + u32 dpll; + u32 fp; + struct gma_clock_t clock; + bool is_lvds; + struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; + + if (gma_power_begin(dev, false)) { + dpll = REG_READ(map->dpll); + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = REG_READ(map->fp0); + else + fp = REG_READ(map->fp1); + is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); + gma_power_end(dev); + } else { + dpll = p->dpll; + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = p->fp0; + else + fp = p->fp1; + + is_lvds = (pipe == 1) && + (dev_priv->regs.psb.saveLVDS & LVDS_PORT_EN); + } + + clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; + clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; + clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; + + if (is_lvds) { + clock.p1 = + ffs((dpll & + DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> + DPLL_FPA01_P1_POST_DIV_SHIFT); + if (clock.p1 == 0) { + clock.p1 = 4; + dev_err(dev->dev, "PLL %d\n", dpll); + } + clock.p2 = 14; + + if ((dpll & PLL_REF_INPUT_MASK) == + PLLB_REF_INPUT_SPREADSPECTRUMIN) { + /* XXX: might not be 66MHz */ + i8xx_clock(66000, &clock); + } else + i8xx_clock(48000, &clock); + } else { + if (dpll & PLL_P1_DIVIDE_BY_TWO) + clock.p1 = 2; + else { + clock.p1 = + ((dpll & + DPLL_FPA01_P1_POST_DIV_MASK_I830) >> + DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; + } + if (dpll & PLL_P2_DIVIDE_BY_4) + clock.p2 = 4; + else + clock.p2 = 2; + + i8xx_clock(48000, &clock); + } + + /* XXX: It would be nice to validate the clocks, but we can't reuse + * i830PllIsValid() because it relies on the xf86_config connector + * configuration being accurate, which it isn't necessarily. + */ + + return clock.dot; +} + +/** Returns the currently programmed mode of the given pipe. */ +struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + struct drm_display_mode *mode; + int htot; + int hsync; + int vtot; + int vsync; + + if (gma_power_begin(dev, false)) { + htot = REG_READ(map->htotal); + hsync = REG_READ(map->hsync); + vtot = REG_READ(map->vtotal); + vsync = REG_READ(map->vsync); + gma_power_end(dev); + } else { + htot = p->htotal; + hsync = p->hsync; + vtot = p->vtotal; + vsync = p->vsync; + } + + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->clock = cdv_intel_crtc_clock_get(dev, crtc); + mode->hdisplay = (htot & 0xffff) + 1; + mode->htotal = ((htot & 0xffff0000) >> 16) + 1; + mode->hsync_start = (hsync & 0xffff) + 1; + mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; + mode->vdisplay = (vtot & 0xffff) + 1; + mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; + mode->vsync_start = (vsync & 0xffff) + 1; + mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + return mode; +} + +const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = { + .dpms = gma_crtc_dpms, + .mode_set = cdv_intel_crtc_mode_set, + .mode_set_base = gma_pipe_set_base, + .prepare = gma_crtc_prepare, + .commit = gma_crtc_commit, + .disable = gma_crtc_disable, +}; + +const struct gma_clock_funcs cdv_clock_funcs = { + .clock = cdv_intel_clock, + .limit = cdv_intel_limit, + .pll_is_valid = gma_pll_is_valid, +}; diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c new file mode 100644 index 000000000..53b967282 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c @@ -0,0 +1,2094 @@ +/* + * Copyright © 2012 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <drm/display/drm_dp_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_simple_kms_helper.h> + +#include "gma_display.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +/** + * struct i2c_algo_dp_aux_data - driver interface structure for i2c over dp + * aux algorithm + * @running: set by the algo indicating whether an i2c is ongoing or whether + * the i2c bus is quiescent + * @address: i2c target address for the currently ongoing transfer + * @aux_ch: driver callback to transfer a single byte of the i2c payload + */ +struct i2c_algo_dp_aux_data { + bool running; + u16 address; + int (*aux_ch) (struct i2c_adapter *adapter, + int mode, uint8_t write_byte, + uint8_t *read_byte); +}; + +/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ +static int +i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + ret = (*algo_data->aux_ch)(adapter, mode, + write_byte, read_byte); + return ret; +} + +/* + * I2C over AUX CH + */ + +/* + * Send the address. If the I2C link is running, this 'restarts' + * the connection with the new address, this is used for doing + * a write followed by a read (as needed for DDC) + */ +static int +i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_START; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + algo_data->address = address; + algo_data->running = true; + return i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); +} + +/* + * Stop the I2C transaction. This closes out the link, sending + * a bare address packet with the MOT bit turned off + */ +static void +i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_STOP; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + if (algo_data->running) { + (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + algo_data->running = false; + } +} + +/* + * Write a single byte to the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + + if (!algo_data->running) + return -EIO; + + return i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); +} + +/* + * Read a single byte from the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + + if (!algo_data->running) + return -EIO; + + return i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); +} + +static int +i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + int ret = 0; + bool reading = false; + int m; + int b; + + for (m = 0; m < num; m++) { + u16 len = msgs[m].len; + u8 *buf = msgs[m].buf; + reading = (msgs[m].flags & I2C_M_RD) != 0; + ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); + if (ret < 0) + break; + if (reading) { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); + if (ret < 0) + break; + } + } else { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); + if (ret < 0) + break; + } + } + if (ret < 0) + break; + } + if (ret >= 0) + ret = num; + i2c_algo_dp_aux_stop(adapter, reading); + DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret); + return ret; +} + +static u32 +i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm i2c_dp_aux_algo = { + .master_xfer = i2c_algo_dp_aux_xfer, + .functionality = i2c_algo_dp_aux_functionality, +}; + +static void +i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) +{ + (void) i2c_algo_dp_aux_address(adapter, 0, false); + (void) i2c_algo_dp_aux_stop(adapter, false); +} + +static int +i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) +{ + adapter->algo = &i2c_dp_aux_algo; + adapter->retries = 3; + i2c_dp_aux_reset_bus(adapter); + return 0; +} + +/* + * FIXME: This is the old dp aux helper, gma500 is the last driver that needs to + * be ported over to the new helper code in drm_dp_helper.c like i915 or radeon. + */ +static int +i2c_dp_aux_add_bus(struct i2c_adapter *adapter) +{ + int error; + + error = i2c_dp_aux_prepare_bus(adapter); + if (error) + return error; + error = i2c_add_adapter(adapter); + return error; +} + +#define _wait_for(COND, MS, W) ({ \ + unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ + int ret__ = 0; \ + while (! (COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + if (W && !in_dbg_master()) msleep(W); \ + } \ + ret__; \ +}) + +#define wait_for(COND, MS) _wait_for(COND, MS, 1) + +#define DP_LINK_CHECK_TIMEOUT (10 * 1000) + +#define DP_LINK_CONFIGURATION_SIZE 9 + +#define CDV_FAST_LINK_TRAIN 1 + +struct cdv_intel_dp { + uint32_t output_reg; + uint32_t DP; + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; + bool has_audio; + int force_audio; + uint32_t color_range; + uint8_t link_bw; + uint8_t lane_count; + uint8_t dpcd[4]; + struct gma_encoder *encoder; + struct i2c_adapter adapter; + struct i2c_algo_dp_aux_data algo; + uint8_t train_set[4]; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + int panel_power_up_delay; + int panel_power_down_delay; + int panel_power_cycle_delay; + int backlight_on_delay; + int backlight_off_delay; + struct drm_display_mode *panel_fixed_mode; /* for eDP */ + bool panel_on; +}; + +struct ddi_regoff { + uint32_t PreEmph1; + uint32_t PreEmph2; + uint32_t VSwing1; + uint32_t VSwing2; + uint32_t VSwing3; + uint32_t VSwing4; + uint32_t VSwing5; +}; + +static struct ddi_regoff ddi_DP_train_table[] = { + {.PreEmph1 = 0x812c, .PreEmph2 = 0x8124, .VSwing1 = 0x8154, + .VSwing2 = 0x8148, .VSwing3 = 0x814C, .VSwing4 = 0x8150, + .VSwing5 = 0x8158,}, + {.PreEmph1 = 0x822c, .PreEmph2 = 0x8224, .VSwing1 = 0x8254, + .VSwing2 = 0x8248, .VSwing3 = 0x824C, .VSwing4 = 0x8250, + .VSwing5 = 0x8258,}, +}; + +static uint32_t dp_vswing_premph_table[] = { + 0x55338954, 0x4000, + 0x554d8954, 0x2000, + 0x55668954, 0, + 0x559ac0d4, 0x6000, +}; +/** + * is_edp - is the given port attached to an eDP panel (either CPU or PCH) + * @encoder: GMA encoder struct + * + * If a CPU or PCH DP output is attached to an eDP panel, this function + * will return true, and false otherwise. + */ +static bool is_edp(struct gma_encoder *encoder) +{ + return encoder->type == INTEL_OUTPUT_EDP; +} + + +static void cdv_intel_dp_start_link_train(struct gma_encoder *encoder); +static void cdv_intel_dp_complete_link_train(struct gma_encoder *encoder); +static void cdv_intel_dp_link_down(struct gma_encoder *encoder); + +static int +cdv_intel_dp_max_lane_count(struct gma_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int max_lane_count = 4; + + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { + max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; + } + } + return max_lane_count; +} + +static int +cdv_intel_dp_max_link_bw(struct gma_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; + + switch (max_link_bw) { + case DP_LINK_BW_1_62: + case DP_LINK_BW_2_7: + break; + default: + max_link_bw = DP_LINK_BW_1_62; + break; + } + return max_link_bw; +} + +static int +cdv_intel_dp_link_clock(uint8_t link_bw) +{ + if (link_bw == DP_LINK_BW_2_7) + return 270000; + else + return 162000; +} + +static int +cdv_intel_dp_link_required(int pixel_clock, int bpp) +{ + return (pixel_clock * bpp + 7) / 8; +} + +static int +cdv_intel_dp_max_data_rate(int max_link_clock, int max_lanes) +{ + return (max_link_clock * max_lanes * 19) / 20; +} + +static void cdv_intel_edp_panel_vdd_on(struct gma_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + u32 pp; + + if (intel_dp->panel_on) { + DRM_DEBUG_KMS("Skip VDD on because of panel on\n"); + return; + } + DRM_DEBUG_KMS("\n"); + + pp = REG_READ(PP_CONTROL); + + pp |= EDP_FORCE_VDD; + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + msleep(intel_dp->panel_power_up_delay); +} + +static void cdv_intel_edp_panel_vdd_off(struct gma_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + u32 pp; + + DRM_DEBUG_KMS("\n"); + pp = REG_READ(PP_CONTROL); + + pp &= ~EDP_FORCE_VDD; + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + +} + +/* Returns true if the panel was already on when called */ +static bool cdv_intel_edp_panel_on(struct gma_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_NONE; + + if (intel_dp->panel_on) + return true; + + DRM_DEBUG_KMS("\n"); + pp = REG_READ(PP_CONTROL); + pp &= ~PANEL_UNLOCK_MASK; + + pp |= (PANEL_UNLOCK_REGS | POWER_TARGET_ON); + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + + if (wait_for(((REG_READ(PP_STATUS) & idle_on_mask) == idle_on_mask), 1000)) { + DRM_DEBUG_KMS("Error in Powering up eDP panel, status %x\n", REG_READ(PP_STATUS)); + intel_dp->panel_on = false; + } else + intel_dp->panel_on = true; + msleep(intel_dp->panel_power_up_delay); + + return false; +} + +static void cdv_intel_edp_panel_off (struct gma_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + u32 pp, idle_off_mask = PP_ON ; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + + DRM_DEBUG_KMS("\n"); + + pp = REG_READ(PP_CONTROL); + + if ((pp & POWER_TARGET_ON) == 0) + return; + + intel_dp->panel_on = false; + pp &= ~PANEL_UNLOCK_MASK; + /* ILK workaround: disable reset around power sequence */ + + pp &= ~POWER_TARGET_ON; + pp &= ~EDP_FORCE_VDD; + pp &= ~EDP_BLC_ENABLE; + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + DRM_DEBUG_KMS("PP_STATUS %x\n", REG_READ(PP_STATUS)); + + if (wait_for((REG_READ(PP_STATUS) & idle_off_mask) == 0, 1000)) { + DRM_DEBUG_KMS("Error in turning off Panel\n"); + } + + msleep(intel_dp->panel_power_cycle_delay); + DRM_DEBUG_KMS("Over\n"); +} + +static void cdv_intel_edp_backlight_on (struct gma_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + u32 pp; + + DRM_DEBUG_KMS("\n"); + /* + * If we enable the backlight right away following a panel power + * on, we may see slight flicker as the panel syncs with the eDP + * link. So delay a bit to make sure the image is solid before + * allowing it to appear. + */ + msleep(300); + pp = REG_READ(PP_CONTROL); + + pp |= EDP_BLC_ENABLE; + REG_WRITE(PP_CONTROL, pp); + gma_backlight_enable(dev); +} + +static void cdv_intel_edp_backlight_off (struct gma_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + u32 pp; + + DRM_DEBUG_KMS("\n"); + gma_backlight_disable(dev); + msleep(10); + pp = REG_READ(PP_CONTROL); + + pp &= ~EDP_BLC_ENABLE; + REG_WRITE(PP_CONTROL, pp); + msleep(intel_dp->backlight_off_delay); +} + +static enum drm_mode_status +cdv_intel_dp_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct gma_encoder *encoder = gma_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int max_link_clock = cdv_intel_dp_link_clock(cdv_intel_dp_max_link_bw(encoder)); + int max_lanes = cdv_intel_dp_max_lane_count(encoder); + struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); + + if (is_edp(encoder) && intel_dp->panel_fixed_mode) { + if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > intel_dp->panel_fixed_mode->vdisplay) + return MODE_PANEL; + } + + /* only refuse the mode on non eDP since we have seen some weird eDP panels + which are outside spec tolerances but somehow work by magic */ + if (!is_edp(encoder) && + (cdv_intel_dp_link_required(mode->clock, dev_priv->edp.bpp) + > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes))) + return MODE_CLOCK_HIGH; + + if (is_edp(encoder)) { + if (cdv_intel_dp_link_required(mode->clock, 24) + > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes)) + return MODE_CLOCK_HIGH; + + } + if (mode->clock < 10000) + return MODE_CLOCK_LOW; + + return MODE_OK; +} + +static uint32_t +pack_aux(uint8_t *src, int src_bytes) +{ + int i; + uint32_t v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((uint32_t) src[i]) << ((3-i) * 8); + return v; +} + +static void +unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +static int +cdv_intel_dp_aux_ch(struct gma_encoder *encoder, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint32_t output_reg = intel_dp->output_reg; + struct drm_device *dev = encoder->base.dev; + uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_data = ch_ctl + 4; + int i; + int recv_bytes; + uint32_t status; + uint32_t aux_clock_divider; + int try, precharge; + + /* The clock divider is based off the hrawclk, + * and would like to run at 2MHz. So, take the + * hrawclk value and divide by 2 and use that + * On CDV platform it uses 200MHz as hrawclk. + * + */ + aux_clock_divider = 200 / 2; + + precharge = 4; + if (is_edp(encoder)) + precharge = 10; + + if (REG_READ(ch_ctl) & DP_AUX_CH_CTL_SEND_BUSY) { + DRM_ERROR("dp_aux_ch not started status 0x%08x\n", + REG_READ(ch_ctl)); + return -EBUSY; + } + + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) + REG_WRITE(ch_data + i, + pack_aux(send + i, send_bytes - i)); + + /* Send the command and wait for it to complete */ + REG_WRITE(ch_ctl, + DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_400us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + for (;;) { + status = REG_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + udelay(100); + } + + /* Clear done status and any errors */ + REG_WRITE(ch_ctl, + status | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + if (status & DP_AUX_CH_CTL_DONE) + break; + } + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); + return -EBUSY; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); + return -EIO; + } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status); + return -ETIMEDOUT; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) + unpack_aux(REG_READ(ch_data + i), + recv + i, recv_bytes - i); + + return recv_bytes; +} + +/* Write data to the aux channel in native mode */ +static int +cdv_intel_dp_aux_native_write(struct gma_encoder *encoder, + uint16_t address, uint8_t *send, int send_bytes) +{ + int ret; + uint8_t msg[20]; + int msg_bytes; + uint8_t ack; + + if (send_bytes > 16) + return -1; + msg[0] = DP_AUX_NATIVE_WRITE << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = send_bytes - 1; + memcpy(&msg[4], send, send_bytes); + msg_bytes = send_bytes + 4; + for (;;) { + ret = cdv_intel_dp_aux_ch(encoder, msg, msg_bytes, &ack, 1); + if (ret < 0) + return ret; + ack >>= 4; + if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_ACK) + break; + else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } + return send_bytes; +} + +/* Write a single byte to the aux channel in native mode */ +static int +cdv_intel_dp_aux_native_write_1(struct gma_encoder *encoder, + uint16_t address, uint8_t byte) +{ + return cdv_intel_dp_aux_native_write(encoder, address, &byte, 1); +} + +/* read bytes from a native aux channel */ +static int +cdv_intel_dp_aux_native_read(struct gma_encoder *encoder, + uint16_t address, uint8_t *recv, int recv_bytes) +{ + uint8_t msg[4]; + int msg_bytes; + uint8_t reply[20]; + int reply_bytes; + uint8_t ack; + int ret; + + msg[0] = DP_AUX_NATIVE_READ << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = recv_bytes - 1; + + msg_bytes = 4; + reply_bytes = recv_bytes + 1; + + for (;;) { + ret = cdv_intel_dp_aux_ch(encoder, msg, msg_bytes, + reply, reply_bytes); + if (ret == 0) + return -EPROTO; + if (ret < 0) + return ret; + ack = reply[0] >> 4; + if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_ACK) { + memcpy(recv, reply + 1, ret - 1); + return ret - 1; + } + else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } +} + +static int +cdv_intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + struct cdv_intel_dp *intel_dp = container_of(adapter, + struct cdv_intel_dp, + adapter); + struct gma_encoder *encoder = intel_dp->encoder; + uint16_t address = algo_data->address; + uint8_t msg[5]; + uint8_t reply[2]; + unsigned retry; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = DP_AUX_I2C_READ << 4; + else + msg[0] = DP_AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= DP_AUX_I2C_MOT << 4; + + msg[1] = address >> 8; + msg[2] = address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } + + for (retry = 0; retry < 5; retry++) { + ret = cdv_intel_dp_aux_ch(encoder, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + DRM_DEBUG_KMS("aux_ch failed %d\n", ret); + return ret; + } + + switch ((reply[0] >> 4) & DP_AUX_NATIVE_REPLY_MASK) { + case DP_AUX_NATIVE_REPLY_ACK: + /* I2C-over-AUX Reply field is only valid + * when paired with AUX ACK. + */ + break; + case DP_AUX_NATIVE_REPLY_NACK: + DRM_DEBUG_KMS("aux_ch native nack\n"); + return -EREMOTEIO; + case DP_AUX_NATIVE_REPLY_DEFER: + udelay(100); + continue; + default: + DRM_ERROR("aux_ch invalid native reply 0x%02x\n", + reply[0]); + return -EREMOTEIO; + } + + switch ((reply[0] >> 4) & DP_AUX_I2C_REPLY_MASK) { + case DP_AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case DP_AUX_I2C_REPLY_NACK: + DRM_DEBUG_KMS("aux_i2c nack\n"); + return -EREMOTEIO; + case DP_AUX_I2C_REPLY_DEFER: + DRM_DEBUG_KMS("aux_i2c defer\n"); + udelay(100); + break; + default: + DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]); + return -EREMOTEIO; + } + } + + DRM_ERROR("too many retries, giving up\n"); + return -EREMOTEIO; +} + +static int +cdv_intel_dp_i2c_init(struct gma_connector *connector, + struct gma_encoder *encoder, const char *name) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int ret; + + DRM_DEBUG_KMS("i2c_init %s\n", name); + + intel_dp->algo.running = false; + intel_dp->algo.address = 0; + intel_dp->algo.aux_ch = cdv_intel_dp_i2c_aux_ch; + + memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter)); + intel_dp->adapter.owner = THIS_MODULE; + intel_dp->adapter.class = I2C_CLASS_DDC; + strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1); + intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0'; + intel_dp->adapter.algo_data = &intel_dp->algo; + intel_dp->adapter.dev.parent = connector->base.kdev; + + if (is_edp(encoder)) + cdv_intel_edp_panel_vdd_on(encoder); + ret = i2c_dp_aux_add_bus(&intel_dp->adapter); + if (is_edp(encoder)) + cdv_intel_edp_panel_vdd_off(encoder); + + return ret; +} + +static void cdv_intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, + struct drm_display_mode *adjusted_mode) +{ + adjusted_mode->hdisplay = fixed_mode->hdisplay; + adjusted_mode->hsync_start = fixed_mode->hsync_start; + adjusted_mode->hsync_end = fixed_mode->hsync_end; + adjusted_mode->htotal = fixed_mode->htotal; + + adjusted_mode->vdisplay = fixed_mode->vdisplay; + adjusted_mode->vsync_start = fixed_mode->vsync_start; + adjusted_mode->vsync_end = fixed_mode->vsync_end; + adjusted_mode->vtotal = fixed_mode->vtotal; + + adjusted_mode->clock = fixed_mode->clock; + + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); +} + +static bool +cdv_intel_dp_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(encoder->dev); + struct gma_encoder *intel_encoder = to_gma_encoder(encoder); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + int lane_count, clock; + int max_lane_count = cdv_intel_dp_max_lane_count(intel_encoder); + int max_clock = cdv_intel_dp_max_link_bw(intel_encoder) == DP_LINK_BW_2_7 ? 1 : 0; + static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; + int refclock = mode->clock; + int bpp = 24; + + if (is_edp(intel_encoder) && intel_dp->panel_fixed_mode) { + cdv_intel_fixed_panel_mode(intel_dp->panel_fixed_mode, adjusted_mode); + refclock = intel_dp->panel_fixed_mode->clock; + bpp = dev_priv->edp.bpp; + } + + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = max_clock; clock >= 0; clock--) { + int link_avail = cdv_intel_dp_max_data_rate(cdv_intel_dp_link_clock(bws[clock]), lane_count); + + if (cdv_intel_dp_link_required(refclock, bpp) <= link_avail) { + intel_dp->link_bw = bws[clock]; + intel_dp->lane_count = lane_count; + adjusted_mode->clock = cdv_intel_dp_link_clock(intel_dp->link_bw); + DRM_DEBUG_KMS("Display port link bw %02x lane " + "count %d clock %d\n", + intel_dp->link_bw, intel_dp->lane_count, + adjusted_mode->clock); + return true; + } + } + } + if (is_edp(intel_encoder)) { + /* okay we failed just pick the highest */ + intel_dp->lane_count = max_lane_count; + intel_dp->link_bw = bws[max_clock]; + adjusted_mode->clock = cdv_intel_dp_link_clock(intel_dp->link_bw); + DRM_DEBUG_KMS("Force picking display port link bw %02x lane " + "count %d clock %d\n", + intel_dp->link_bw, intel_dp->lane_count, + adjusted_mode->clock); + + return true; + } + return false; +} + +struct cdv_intel_dp_m_n { + uint32_t tu; + uint32_t gmch_m; + uint32_t gmch_n; + uint32_t link_m; + uint32_t link_n; +}; + +static void +cdv_intel_reduce_ratio(uint32_t *num, uint32_t *den) +{ + /* + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + }*/ + uint64_t value, m; + m = *num; + value = m * (0x800000); + m = do_div(value, *den); + *num = value; + *den = 0x800000; +} + +static void +cdv_intel_dp_compute_m_n(int bpp, + int nlanes, + int pixel_clock, + int link_clock, + struct cdv_intel_dp_m_n *m_n) +{ + m_n->tu = 64; + m_n->gmch_m = (pixel_clock * bpp + 7) >> 3; + m_n->gmch_n = link_clock * nlanes; + cdv_intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; + cdv_intel_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + +void +cdv_intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_encoder *encoder; + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int lane_count = 4, bpp = 24; + struct cdv_intel_dp_m_n m_n; + int pipe = gma_crtc->pipe; + + /* + * Find the lane count in the intel_encoder private + */ + list_for_each_entry(encoder, &mode_config->encoder_list, head) { + struct gma_encoder *intel_encoder; + struct cdv_intel_dp *intel_dp; + + if (encoder->crtc != crtc) + continue; + + intel_encoder = to_gma_encoder(encoder); + intel_dp = intel_encoder->dev_priv; + if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) { + lane_count = intel_dp->lane_count; + break; + } else if (is_edp(intel_encoder)) { + lane_count = intel_dp->lane_count; + bpp = dev_priv->edp.bpp; + break; + } + } + + /* + * Compute the GMCH and Link ratios. The '3' here is + * the number of bytes_per_pixel post-LUT, which we always + * set up for 8-bits of R/G/B, or 3 bytes total. + */ + cdv_intel_dp_compute_m_n(bpp, lane_count, + mode->clock, adjusted_mode->clock, &m_n); + + { + REG_WRITE(PIPE_GMCH_DATA_M(pipe), + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + REG_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n); + REG_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m); + REG_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n); + } +} + +static void +cdv_intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct gma_encoder *intel_encoder = to_gma_encoder(encoder); + struct drm_crtc *crtc = encoder->crtc; + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + struct drm_device *dev = encoder->dev; + + intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + switch (intel_dp->lane_count) { + case 1: + intel_dp->DP |= DP_PORT_WIDTH_1; + break; + case 2: + intel_dp->DP |= DP_PORT_WIDTH_2; + break; + case 4: + intel_dp->DP |= DP_PORT_WIDTH_4; + break; + } + if (intel_dp->has_audio) + intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; + + memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); + intel_dp->link_configuration[0] = intel_dp->link_bw; + intel_dp->link_configuration[1] = intel_dp->lane_count; + + /* + * Check for DPCD version > 1.1 and enhanced framing support + */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { + intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + intel_dp->DP |= DP_ENHANCED_FRAMING; + } + + /* CPT DP's pipe select is decided in TRANS_DP_CTL */ + if (gma_crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + REG_WRITE(intel_dp->output_reg, (intel_dp->DP | DP_PORT_EN)); + DRM_DEBUG_KMS("DP expected reg is %x\n", intel_dp->DP); + if (is_edp(intel_encoder)) { + uint32_t pfit_control; + cdv_intel_edp_panel_on(intel_encoder); + + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) + pfit_control = PFIT_ENABLE; + else + pfit_control = 0; + + pfit_control |= gma_crtc->pipe << PFIT_PIPE_SHIFT; + + REG_WRITE(PFIT_CONTROL, pfit_control); + } +} + + +/* If the sink supports it, try to set the power state appropriately */ +static void cdv_intel_dp_sink_dpms(struct gma_encoder *encoder, int mode) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int ret, i; + + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (mode != DRM_MODE_DPMS_ON) { + ret = cdv_intel_dp_aux_native_write_1(encoder, DP_SET_POWER, + DP_SET_POWER_D3); + if (ret != 1) + DRM_DEBUG_DRIVER("failed to write sink power state\n"); + } else { + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = cdv_intel_dp_aux_native_write_1(encoder, + DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + udelay(1000); + } + } +} + +static void cdv_intel_dp_prepare(struct drm_encoder *encoder) +{ + struct gma_encoder *intel_encoder = to_gma_encoder(encoder); + int edp = is_edp(intel_encoder); + + if (edp) { + cdv_intel_edp_backlight_off(intel_encoder); + cdv_intel_edp_panel_off(intel_encoder); + cdv_intel_edp_panel_vdd_on(intel_encoder); + } + /* Wake up the sink first */ + cdv_intel_dp_sink_dpms(intel_encoder, DRM_MODE_DPMS_ON); + cdv_intel_dp_link_down(intel_encoder); + if (edp) + cdv_intel_edp_panel_vdd_off(intel_encoder); +} + +static void cdv_intel_dp_commit(struct drm_encoder *encoder) +{ + struct gma_encoder *intel_encoder = to_gma_encoder(encoder); + int edp = is_edp(intel_encoder); + + if (edp) + cdv_intel_edp_panel_on(intel_encoder); + cdv_intel_dp_start_link_train(intel_encoder); + cdv_intel_dp_complete_link_train(intel_encoder); + if (edp) + cdv_intel_edp_backlight_on(intel_encoder); +} + +static void +cdv_intel_dp_dpms(struct drm_encoder *encoder, int mode) +{ + struct gma_encoder *intel_encoder = to_gma_encoder(encoder); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + struct drm_device *dev = encoder->dev; + uint32_t dp_reg = REG_READ(intel_dp->output_reg); + int edp = is_edp(intel_encoder); + + if (mode != DRM_MODE_DPMS_ON) { + if (edp) { + cdv_intel_edp_backlight_off(intel_encoder); + cdv_intel_edp_panel_vdd_on(intel_encoder); + } + cdv_intel_dp_sink_dpms(intel_encoder, mode); + cdv_intel_dp_link_down(intel_encoder); + if (edp) { + cdv_intel_edp_panel_vdd_off(intel_encoder); + cdv_intel_edp_panel_off(intel_encoder); + } + } else { + if (edp) + cdv_intel_edp_panel_on(intel_encoder); + cdv_intel_dp_sink_dpms(intel_encoder, mode); + if (!(dp_reg & DP_PORT_EN)) { + cdv_intel_dp_start_link_train(intel_encoder); + cdv_intel_dp_complete_link_train(intel_encoder); + } + if (edp) + cdv_intel_edp_backlight_on(intel_encoder); + } +} + +/* + * Native read with retry for link status and receiver capability reads for + * cases where the sink may still be asleep. + */ +static bool +cdv_intel_dp_aux_native_read_retry(struct gma_encoder *encoder, uint16_t address, + uint8_t *recv, int recv_bytes) +{ + int ret, i; + + /* + * Sinks are *supposed* to come up within 1ms from an off state, + * but we're also supposed to retry 3 times per the spec. + */ + for (i = 0; i < 3; i++) { + ret = cdv_intel_dp_aux_native_read(encoder, address, recv, + recv_bytes); + if (ret == recv_bytes) + return true; + udelay(1000); + } + + return false; +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +cdv_intel_dp_get_link_status(struct gma_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + return cdv_intel_dp_aux_native_read_retry(encoder, + DP_LANE0_1_STATUS, + intel_dp->link_status, + DP_LINK_STATUS_SIZE); +} + +static uint8_t +cdv_intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int r) +{ + return link_status[r - DP_LANE0_1_STATUS]; +} + +static uint8_t +cdv_intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + uint8_t l = cdv_intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +static uint8_t +cdv_intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + uint8_t l = cdv_intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} + +#define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_LEVEL_3 + +static void +cdv_intel_get_adjust_train(struct gma_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint8_t v = 0; + uint8_t p = 0; + int lane; + + for (lane = 0; lane < intel_dp->lane_count; lane++) { + uint8_t this_v = cdv_intel_get_adjust_request_voltage(intel_dp->link_status, lane); + uint8_t this_p = cdv_intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); + + if (this_v > v) + v = this_v; + if (this_p > p) + p = this_p; + } + + if (v >= CDV_DP_VOLTAGE_MAX) + v = CDV_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + + if (p == DP_TRAIN_PRE_EMPHASIS_MASK) + p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + for (lane = 0; lane < 4; lane++) + intel_dp->train_set[lane] = v | p; +} + + +static uint8_t +cdv_intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_LANE0_1_STATUS + (lane >> 1); + int s = (lane & 1) * 4; + uint8_t l = cdv_intel_dp_link_status(link_status, i); + + return (l >> s) & 0xf; +} + +/* Check for clock recovery is done on all channels */ +static bool +cdv_intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + int lane; + uint8_t lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = cdv_intel_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return false; + } + return true; +} + +/* Check to see if channel eq is done on all channels */ +#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ + DP_LANE_CHANNEL_EQ_DONE|\ + DP_LANE_SYMBOL_LOCKED) +static bool +cdv_intel_channel_eq_ok(struct gma_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint8_t lane_align; + uint8_t lane_status; + int lane; + + lane_align = cdv_intel_dp_link_status(intel_dp->link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return false; + for (lane = 0; lane < intel_dp->lane_count; lane++) { + lane_status = cdv_intel_get_lane_status(intel_dp->link_status, lane); + if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) + return false; + } + return true; +} + +static bool +cdv_intel_dp_set_link_train(struct gma_encoder *encoder, + uint32_t dp_reg_value, + uint8_t dp_train_pat) +{ + struct drm_device *dev = encoder->base.dev; + int ret; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + + REG_WRITE(intel_dp->output_reg, dp_reg_value); + REG_READ(intel_dp->output_reg); + + ret = cdv_intel_dp_aux_native_write_1(encoder, + DP_TRAINING_PATTERN_SET, + dp_train_pat); + + if (ret != 1) { + DRM_DEBUG_KMS("Failure in setting link pattern %x\n", + dp_train_pat); + return false; + } + + return true; +} + + +static bool +cdv_intel_dplink_set_level(struct gma_encoder *encoder, + uint8_t dp_train_pat) +{ + int ret; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + + ret = cdv_intel_dp_aux_native_write(encoder, + DP_TRAINING_LANE0_SET, + intel_dp->train_set, + intel_dp->lane_count); + + if (ret != intel_dp->lane_count) { + DRM_DEBUG_KMS("Failure in setting level %d, lane_cnt= %d\n", + intel_dp->train_set[0], intel_dp->lane_count); + return false; + } + return true; +} + +static void +cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + struct ddi_regoff *ddi_reg; + int vswing, premph, index; + + if (intel_dp->output_reg == DP_B) + ddi_reg = &ddi_DP_train_table[0]; + else + ddi_reg = &ddi_DP_train_table[1]; + + vswing = (signal_level & DP_TRAIN_VOLTAGE_SWING_MASK); + premph = ((signal_level & DP_TRAIN_PRE_EMPHASIS_MASK)) >> + DP_TRAIN_PRE_EMPHASIS_SHIFT; + + if (vswing + premph > 3) + return; +#ifdef CDV_FAST_LINK_TRAIN + return; +#endif + DRM_DEBUG_KMS("Test2\n"); + //return ; + cdv_sb_reset(dev); + /* ;Swing voltage programming + ;gfx_dpio_set_reg(0xc058, 0x0505313A) */ + cdv_sb_write(dev, ddi_reg->VSwing5, 0x0505313A); + + /* ;gfx_dpio_set_reg(0x8154, 0x43406055) */ + cdv_sb_write(dev, ddi_reg->VSwing1, 0x43406055); + + /* ;gfx_dpio_set_reg(0x8148, 0x55338954) + * The VSwing_PreEmph table is also considered based on the vswing/premp + */ + index = (vswing + premph) * 2; + if (premph == 1 && vswing == 1) { + cdv_sb_write(dev, ddi_reg->VSwing2, 0x055738954); + } else + cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]); + + /* ;gfx_dpio_set_reg(0x814c, 0x40802040) */ + if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3) + cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040); + else + cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040); + + /* ;gfx_dpio_set_reg(0x8150, 0x2b405555) */ + /* cdv_sb_write(dev, ddi_reg->VSwing4, 0x2b405555); */ + + /* ;gfx_dpio_set_reg(0x8154, 0xc3406055) */ + cdv_sb_write(dev, ddi_reg->VSwing1, 0xc3406055); + + /* ;Pre emphasis programming + * ;gfx_dpio_set_reg(0xc02c, 0x1f030040) + */ + cdv_sb_write(dev, ddi_reg->PreEmph1, 0x1f030040); + + /* ;gfx_dpio_set_reg(0x8124, 0x00004000) */ + index = 2 * premph + 1; + cdv_sb_write(dev, ddi_reg->PreEmph2, dp_vswing_premph_table[index]); + return; +} + + +/* Enable corresponding port and start training pattern 1 */ +static void +cdv_intel_dp_start_link_train(struct gma_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int i; + uint8_t voltage; + bool clock_recovery = false; + int tries; + u32 reg; + uint32_t DP = intel_dp->DP; + + DP |= DP_PORT_EN; + DP &= ~DP_LINK_TRAIN_MASK; + + reg = DP; + reg |= DP_LINK_TRAIN_PAT_1; + /* Enable output, wait for it to become active */ + REG_WRITE(intel_dp->output_reg, reg); + REG_READ(intel_dp->output_reg); + gma_wait_for_vblank(dev); + + DRM_DEBUG_KMS("Link config\n"); + /* Write the link configuration data */ + cdv_intel_dp_aux_native_write(encoder, DP_LINK_BW_SET, + intel_dp->link_configuration, + 2); + + memset(intel_dp->train_set, 0, 4); + voltage = 0; + tries = 0; + clock_recovery = false; + + DRM_DEBUG_KMS("Start train\n"); + reg = DP | DP_LINK_TRAIN_PAT_1; + + for (;;) { + /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + DRM_DEBUG_KMS("DP Link Train Set %x, Link_config %x, %x\n", + intel_dp->train_set[0], + intel_dp->link_configuration[0], + intel_dp->link_configuration[1]); + + if (!cdv_intel_dp_set_link_train(encoder, reg, DP_TRAINING_PATTERN_1)) { + DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 1\n"); + } + cdv_intel_dp_set_vswing_premph(encoder, intel_dp->train_set[0]); + /* Set training pattern 1 */ + + cdv_intel_dplink_set_level(encoder, DP_TRAINING_PATTERN_1); + + udelay(200); + if (!cdv_intel_dp_get_link_status(encoder)) + break; + + DRM_DEBUG_KMS("DP Link status %x, %x, %x, %x, %x, %x\n", + intel_dp->link_status[0], intel_dp->link_status[1], intel_dp->link_status[2], + intel_dp->link_status[3], intel_dp->link_status[4], intel_dp->link_status[5]); + + if (cdv_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("PT1 train is done\n"); + clock_recovery = true; + break; + } + + /* Check to see if we've tried the max voltage */ + for (i = 0; i < intel_dp->lane_count; i++) + if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == intel_dp->lane_count) + break; + + /* Check to see if we've tried the same voltage 5 times */ + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + + /* Compute new intel_dp->train_set as requested by target */ + cdv_intel_get_adjust_train(encoder); + + } + + if (!clock_recovery) { + DRM_DEBUG_KMS("failure in DP patter 1 training, train set %x\n", intel_dp->train_set[0]); + } + + intel_dp->DP = DP; +} + +static void +cdv_intel_dp_complete_link_train(struct gma_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int tries, cr_tries; + u32 reg; + uint32_t DP = intel_dp->DP; + + /* channel equalization */ + tries = 0; + cr_tries = 0; + + DRM_DEBUG_KMS("\n"); + reg = DP | DP_LINK_TRAIN_PAT_2; + + for (;;) { + + DRM_DEBUG_KMS("DP Link Train Set %x, Link_config %x, %x\n", + intel_dp->train_set[0], + intel_dp->link_configuration[0], + intel_dp->link_configuration[1]); + /* channel eq pattern */ + + if (!cdv_intel_dp_set_link_train(encoder, reg, + DP_TRAINING_PATTERN_2)) { + DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 2\n"); + } + /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + + if (cr_tries > 5) { + DRM_ERROR("failed to train DP, aborting\n"); + cdv_intel_dp_link_down(encoder); + break; + } + + cdv_intel_dp_set_vswing_premph(encoder, intel_dp->train_set[0]); + + cdv_intel_dplink_set_level(encoder, DP_TRAINING_PATTERN_2); + + udelay(1000); + if (!cdv_intel_dp_get_link_status(encoder)) + break; + + DRM_DEBUG_KMS("DP Link status %x, %x, %x, %x, %x, %x\n", + intel_dp->link_status[0], intel_dp->link_status[1], intel_dp->link_status[2], + intel_dp->link_status[3], intel_dp->link_status[4], intel_dp->link_status[5]); + + /* Make sure clock is still ok */ + if (!cdv_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + cdv_intel_dp_start_link_train(encoder); + cr_tries++; + continue; + } + + if (cdv_intel_channel_eq_ok(encoder)) { + DRM_DEBUG_KMS("PT2 train is done\n"); + break; + } + + /* Try 5 times, then try clock recovery if that fails */ + if (tries > 5) { + cdv_intel_dp_link_down(encoder); + cdv_intel_dp_start_link_train(encoder); + tries = 0; + cr_tries++; + continue; + } + + /* Compute new intel_dp->train_set as requested by target */ + cdv_intel_get_adjust_train(encoder); + ++tries; + + } + + reg = DP | DP_LINK_TRAIN_OFF; + + REG_WRITE(intel_dp->output_reg, reg); + REG_READ(intel_dp->output_reg); + cdv_intel_dp_aux_native_write_1(encoder, + DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); +} + +static void +cdv_intel_dp_link_down(struct gma_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint32_t DP = intel_dp->DP; + + if ((REG_READ(intel_dp->output_reg) & DP_PORT_EN) == 0) + return; + + DRM_DEBUG_KMS("\n"); + + + { + DP &= ~DP_LINK_TRAIN_MASK; + REG_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE); + } + REG_READ(intel_dp->output_reg); + + msleep(17); + + REG_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); + REG_READ(intel_dp->output_reg); +} + +static enum drm_connector_status cdv_dp_detect(struct gma_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + enum drm_connector_status status; + + status = connector_status_disconnected; + if (cdv_intel_dp_aux_native_read(encoder, 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd)) + { + if (intel_dp->dpcd[DP_DPCD_REV] != 0) + status = connector_status_connected; + } + if (status == connector_status_connected) + DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n", + intel_dp->dpcd[0], intel_dp->dpcd[1], + intel_dp->dpcd[2], intel_dp->dpcd[3]); + return status; +} + +/* + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. + * + * \return true if DP port is connected. + * \return false if DP port is disconnected. + */ +static enum drm_connector_status +cdv_intel_dp_detect(struct drm_connector *connector, bool force) +{ + struct gma_encoder *encoder = gma_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + enum drm_connector_status status; + struct edid *edid = NULL; + int edp = is_edp(encoder); + + intel_dp->has_audio = false; + + if (edp) + cdv_intel_edp_panel_vdd_on(encoder); + status = cdv_dp_detect(encoder); + if (status != connector_status_connected) { + if (edp) + cdv_intel_edp_panel_vdd_off(encoder); + return status; + } + + if (intel_dp->force_audio) { + intel_dp->has_audio = intel_dp->force_audio > 0; + } else { + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + intel_dp->has_audio = drm_detect_monitor_audio(edid); + kfree(edid); + } + } + if (edp) + cdv_intel_edp_panel_vdd_off(encoder); + + return connector_status_connected; +} + +static int cdv_intel_dp_get_modes(struct drm_connector *connector) +{ + struct gma_encoder *intel_encoder = gma_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + struct edid *edid = NULL; + int ret = 0; + int edp = is_edp(intel_encoder); + + + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + drm_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } + + if (is_edp(intel_encoder)) { + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + cdv_intel_edp_panel_vdd_off(intel_encoder); + if (ret) { + if (edp && !intel_dp->panel_fixed_mode) { + struct drm_display_mode *newmode; + list_for_each_entry(newmode, &connector->probed_modes, + head) { + if (newmode->type & DRM_MODE_TYPE_PREFERRED) { + intel_dp->panel_fixed_mode = + drm_mode_duplicate(dev, newmode); + break; + } + } + } + + return ret; + } + if (!intel_dp->panel_fixed_mode && dev_priv->lfp_lvds_vbt_mode) { + intel_dp->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); + if (intel_dp->panel_fixed_mode) { + intel_dp->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + } + } + if (intel_dp->panel_fixed_mode != NULL) { + struct drm_display_mode *mode; + mode = drm_mode_duplicate(dev, intel_dp->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + return 1; + } + } + + return ret; +} + +static bool +cdv_intel_dp_detect_audio(struct drm_connector *connector) +{ + struct gma_encoder *encoder = gma_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + struct edid *edid; + bool has_audio = false; + int edp = is_edp(encoder); + + if (edp) + cdv_intel_edp_panel_vdd_on(encoder); + + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + has_audio = drm_detect_monitor_audio(edid); + kfree(edid); + } + if (edp) + cdv_intel_edp_panel_vdd_off(encoder); + + return has_audio; +} + +static int +cdv_intel_dp_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t val) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); + struct gma_encoder *encoder = gma_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int ret; + + ret = drm_object_property_set_value(&connector->base, property, val); + if (ret) + return ret; + + if (property == dev_priv->force_audio_property) { + int i = val; + bool has_audio; + + if (i == intel_dp->force_audio) + return 0; + + intel_dp->force_audio = i; + + if (i == 0) + has_audio = cdv_intel_dp_detect_audio(connector); + else + has_audio = i > 0; + + if (has_audio == intel_dp->has_audio) + return 0; + + intel_dp->has_audio = has_audio; + goto done; + } + + if (property == dev_priv->broadcast_rgb_property) { + if (val == !!intel_dp->color_range) + return 0; + + intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0; + goto done; + } + + return -EINVAL; + +done: + if (encoder->base.crtc) { + struct drm_crtc *crtc = encoder->base.crtc; + drm_crtc_helper_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, + crtc->primary->fb); + } + + return 0; +} + +static void +cdv_intel_dp_destroy(struct drm_connector *connector) +{ + struct gma_connector *gma_connector = to_gma_connector(connector); + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = gma_encoder->dev_priv; + + if (is_edp(gma_encoder)) { + /* cdv_intel_panel_destroy_backlight(connector->dev); */ + kfree(intel_dp->panel_fixed_mode); + intel_dp->panel_fixed_mode = NULL; + } + i2c_del_adapter(&intel_dp->adapter); + drm_connector_cleanup(connector); + kfree(gma_connector); +} + +static const struct drm_encoder_helper_funcs cdv_intel_dp_helper_funcs = { + .dpms = cdv_intel_dp_dpms, + .mode_fixup = cdv_intel_dp_mode_fixup, + .prepare = cdv_intel_dp_prepare, + .mode_set = cdv_intel_dp_mode_set, + .commit = cdv_intel_dp_commit, +}; + +static const struct drm_connector_funcs cdv_intel_dp_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = cdv_intel_dp_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = cdv_intel_dp_set_property, + .destroy = cdv_intel_dp_destroy, +}; + +static const struct drm_connector_helper_funcs cdv_intel_dp_connector_helper_funcs = { + .get_modes = cdv_intel_dp_get_modes, + .mode_valid = cdv_intel_dp_mode_valid, + .best_encoder = gma_best_encoder, +}; + +static void cdv_intel_dp_add_properties(struct drm_connector *connector) +{ + cdv_intel_attach_force_audio_property(connector); + cdv_intel_attach_broadcast_rgb_property(connector); +} + +/* check the VBT to see whether the eDP is on DP-D port */ +static bool cdv_intel_dpc_is_edp(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct child_device_config *p_child; + int i; + + if (!dev_priv->child_dev_num) + return false; + + for (i = 0; i < dev_priv->child_dev_num; i++) { + p_child = dev_priv->child_dev + i; + + if (p_child->dvo_port == PORT_IDPC && + p_child->device_type == DEVICE_TYPE_eDP) + return true; + } + return false; +} + +/* Cedarview display clock gating + + We need this disable dot get correct behaviour while enabling + DP/eDP. TODO - investigate if we can turn it back to normality + after enabling */ +static void cdv_disable_intel_clock_gating(struct drm_device *dev) +{ + u32 reg_value; + reg_value = REG_READ(DSPCLK_GATE_D); + + reg_value |= (DPUNIT_PIPEB_GATE_DISABLE | + DPUNIT_PIPEA_GATE_DISABLE | + DPCUNIT_CLOCK_GATE_DISABLE | + DPLSUNIT_CLOCK_GATE_DISABLE | + DPOUNIT_CLOCK_GATE_DISABLE | + DPIOUNIT_CLOCK_GATE_DISABLE); + + REG_WRITE(DSPCLK_GATE_D, reg_value); + + udelay(500); +} + +void +cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, int output_reg) +{ + struct gma_encoder *gma_encoder; + struct gma_connector *gma_connector; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct cdv_intel_dp *intel_dp; + const char *name = NULL; + int type = DRM_MODE_CONNECTOR_DisplayPort; + + gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); + if (!gma_encoder) + return; + gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); + if (!gma_connector) + goto err_connector; + intel_dp = kzalloc(sizeof(struct cdv_intel_dp), GFP_KERNEL); + if (!intel_dp) + goto err_priv; + + if ((output_reg == DP_C) && cdv_intel_dpc_is_edp(dev)) + type = DRM_MODE_CONNECTOR_eDP; + + connector = &gma_connector->base; + encoder = &gma_encoder->base; + + drm_connector_init(dev, connector, &cdv_intel_dp_connector_funcs, type); + drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS); + + gma_connector_attach_encoder(gma_connector, gma_encoder); + + if (type == DRM_MODE_CONNECTOR_DisplayPort) + gma_encoder->type = INTEL_OUTPUT_DISPLAYPORT; + else + gma_encoder->type = INTEL_OUTPUT_EDP; + + + gma_encoder->dev_priv=intel_dp; + intel_dp->encoder = gma_encoder; + intel_dp->output_reg = output_reg; + + drm_encoder_helper_add(encoder, &cdv_intel_dp_helper_funcs); + drm_connector_helper_add(connector, &cdv_intel_dp_connector_helper_funcs); + + connector->polled = DRM_CONNECTOR_POLL_HPD; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + /* Set up the DDC bus. */ + switch (output_reg) { + case DP_B: + name = "DPDDC-B"; + gma_encoder->ddi_select = (DP_MASK | DDI0_SELECT); + break; + case DP_C: + name = "DPDDC-C"; + gma_encoder->ddi_select = (DP_MASK | DDI1_SELECT); + break; + } + + cdv_disable_intel_clock_gating(dev); + + cdv_intel_dp_i2c_init(gma_connector, gma_encoder, name); + /* FIXME:fail check */ + cdv_intel_dp_add_properties(connector); + + if (is_edp(gma_encoder)) { + int ret; + struct edp_power_seq cur; + u32 pp_on, pp_off, pp_div; + u32 pwm_ctrl; + + pp_on = REG_READ(PP_CONTROL); + pp_on &= ~PANEL_UNLOCK_MASK; + pp_on |= PANEL_UNLOCK_REGS; + + REG_WRITE(PP_CONTROL, pp_on); + + pwm_ctrl = REG_READ(BLC_PWM_CTL2); + pwm_ctrl |= PWM_PIPE_B; + REG_WRITE(BLC_PWM_CTL2, pwm_ctrl); + + pp_on = REG_READ(PP_ON_DELAYS); + pp_off = REG_READ(PP_OFF_DELAYS); + pp_div = REG_READ(PP_DIVISOR); + + /* Pull timing values out of registers */ + cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >> + PANEL_POWER_UP_DELAY_SHIFT; + + cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> + PANEL_LIGHT_ON_DELAY_SHIFT; + + cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> + PANEL_LIGHT_OFF_DELAY_SHIFT; + + cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >> + PANEL_POWER_DOWN_DELAY_SHIFT; + + cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >> + PANEL_POWER_CYCLE_DELAY_SHIFT); + + DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", + cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); + + + intel_dp->panel_power_up_delay = cur.t1_t3 / 10; + intel_dp->backlight_on_delay = cur.t8 / 10; + intel_dp->backlight_off_delay = cur.t9 / 10; + intel_dp->panel_power_down_delay = cur.t10 / 10; + intel_dp->panel_power_cycle_delay = (cur.t11_t12 - 1) * 100; + + DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", + intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, + intel_dp->panel_power_cycle_delay); + + DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", + intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + + + cdv_intel_edp_panel_vdd_on(gma_encoder); + ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, + intel_dp->dpcd, + sizeof(intel_dp->dpcd)); + cdv_intel_edp_panel_vdd_off(gma_encoder); + if (ret <= 0) { + /* if this fails, presume the device is a ghost */ + DRM_INFO("failed to retrieve link info, disabling eDP\n"); + drm_encoder_cleanup(encoder); + cdv_intel_dp_destroy(connector); + goto err_connector; + } else { + DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n", + intel_dp->dpcd[0], intel_dp->dpcd[1], + intel_dp->dpcd[2], intel_dp->dpcd[3]); + + } + /* The CDV reference driver moves pnale backlight setup into the displays that + have a backlight: this is a good idea and one we should probably adopt, however + we need to migrate all the drivers before we can do that */ + /*cdv_intel_panel_setup_backlight(dev); */ + } + return; + +err_priv: + kfree(gma_connector); +err_connector: + kfree(gma_encoder); +} diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c new file mode 100644 index 000000000..29ef45f14 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c @@ -0,0 +1,364 @@ +/* + * Copyright © 2006-2011 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * jim liu <jim.liu@intel.com> + */ + +#include <linux/pm_runtime.h> + +#include <drm/drm.h> +#include <drm/drm_crtc.h> +#include <drm/drm_edid.h> +#include <drm/drm_simple_kms_helper.h> + +#include "cdv_device.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +/* hdmi control bits */ +#define HDMI_NULL_PACKETS_DURING_VSYNC (1 << 9) +#define HDMI_BORDER_ENABLE (1 << 7) +#define HDMI_AUDIO_ENABLE (1 << 6) +#define HDMI_VSYNC_ACTIVE_HIGH (1 << 4) +#define HDMI_HSYNC_ACTIVE_HIGH (1 << 3) +/* hdmi-b control bits */ +#define HDMIB_PIPE_B_SELECT (1 << 30) + + +struct mid_intel_hdmi_priv { + u32 hdmi_reg; + u32 save_HDMIB; + bool has_hdmi_sink; + bool has_hdmi_audio; + /* Should set this when detect hotplug */ + bool hdmi_device_connected; + struct drm_device *dev; +}; + +static void cdv_hdmi_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct gma_encoder *gma_encoder = to_gma_encoder(encoder); + struct mid_intel_hdmi_priv *hdmi_priv = gma_encoder->dev_priv; + u32 hdmib; + struct drm_crtc *crtc = encoder->crtc; + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + + hdmib = (2 << 10); + + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + hdmib |= HDMI_VSYNC_ACTIVE_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + hdmib |= HDMI_HSYNC_ACTIVE_HIGH; + + if (gma_crtc->pipe == 1) + hdmib |= HDMIB_PIPE_B_SELECT; + + if (hdmi_priv->has_hdmi_audio) { + hdmib |= HDMI_AUDIO_ENABLE; + hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC; + } + + REG_WRITE(hdmi_priv->hdmi_reg, hdmib); + REG_READ(hdmi_priv->hdmi_reg); +} + +static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct gma_encoder *gma_encoder = to_gma_encoder(encoder); + struct mid_intel_hdmi_priv *hdmi_priv = gma_encoder->dev_priv; + u32 hdmib; + + hdmib = REG_READ(hdmi_priv->hdmi_reg); + + if (mode != DRM_MODE_DPMS_ON) + REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN); + else + REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN); + REG_READ(hdmi_priv->hdmi_reg); +} + +static void cdv_hdmi_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct mid_intel_hdmi_priv *hdmi_priv = gma_encoder->dev_priv; + + hdmi_priv->save_HDMIB = REG_READ(hdmi_priv->hdmi_reg); +} + +static void cdv_hdmi_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct mid_intel_hdmi_priv *hdmi_priv = gma_encoder->dev_priv; + + REG_WRITE(hdmi_priv->hdmi_reg, hdmi_priv->save_HDMIB); + REG_READ(hdmi_priv->hdmi_reg); +} + +static enum drm_connector_status cdv_hdmi_detect( + struct drm_connector *connector, bool force) +{ + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct mid_intel_hdmi_priv *hdmi_priv = gma_encoder->dev_priv; + struct edid *edid = NULL; + enum drm_connector_status status = connector_status_disconnected; + + edid = drm_get_edid(connector, connector->ddc); + + hdmi_priv->has_hdmi_sink = false; + hdmi_priv->has_hdmi_audio = false; + if (edid) { + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + status = connector_status_connected; + hdmi_priv->has_hdmi_sink = + drm_detect_hdmi_monitor(edid); + hdmi_priv->has_hdmi_audio = + drm_detect_monitor_audio(edid); + } + kfree(edid); + } + return status; +} + +static int cdv_hdmi_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_encoder *encoder = connector->encoder; + + if (!strcmp(property->name, "scaling mode") && encoder) { + struct gma_crtc *crtc = to_gma_crtc(encoder->crtc); + bool centre; + uint64_t curValue; + + if (!crtc) + return -1; + + switch (value) { + case DRM_MODE_SCALE_FULLSCREEN: + break; + case DRM_MODE_SCALE_NO_SCALE: + break; + case DRM_MODE_SCALE_ASPECT: + break; + default: + return -1; + } + + if (drm_object_property_get_value(&connector->base, + property, &curValue)) + return -1; + + if (curValue == value) + return 0; + + if (drm_object_property_set_value(&connector->base, + property, value)) + return -1; + + centre = (curValue == DRM_MODE_SCALE_NO_SCALE) || + (value == DRM_MODE_SCALE_NO_SCALE); + + if (crtc->saved_mode.hdisplay != 0 && + crtc->saved_mode.vdisplay != 0) { + if (centre) { + if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode, + encoder->crtc->x, encoder->crtc->y, encoder->crtc->primary->fb)) + return -1; + } else { + const struct drm_encoder_helper_funcs *helpers + = encoder->helper_private; + helpers->mode_set(encoder, &crtc->saved_mode, + &crtc->saved_adjusted_mode); + } + } + } + return 0; +} + +/* + * Return the list of HDMI DDC modes if available. + */ +static int cdv_hdmi_get_modes(struct drm_connector *connector) +{ + struct edid *edid = NULL; + int ret = 0; + + edid = drm_get_edid(connector, connector->ddc); + if (edid) { + drm_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } + return ret; +} + +static enum drm_mode_status cdv_hdmi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + if (mode->clock < 20000) + return MODE_CLOCK_HIGH; + + /* just in case */ + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + /* just in case */ + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + return MODE_NO_INTERLACE; + + return MODE_OK; +} + +static void cdv_hdmi_destroy(struct drm_connector *connector) +{ + struct gma_connector *gma_connector = to_gma_connector(connector); + struct gma_i2c_chan *ddc_bus = to_gma_i2c_chan(connector->ddc); + + gma_i2c_destroy(ddc_bus); + drm_connector_cleanup(connector); + kfree(gma_connector); +} + +static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = { + .dpms = cdv_hdmi_dpms, + .prepare = gma_encoder_prepare, + .mode_set = cdv_hdmi_mode_set, + .commit = gma_encoder_commit, +}; + +static const struct drm_connector_helper_funcs + cdv_hdmi_connector_helper_funcs = { + .get_modes = cdv_hdmi_get_modes, + .mode_valid = cdv_hdmi_mode_valid, + .best_encoder = gma_best_encoder, +}; + +static const struct drm_connector_funcs cdv_hdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = cdv_hdmi_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = cdv_hdmi_set_property, + .destroy = cdv_hdmi_destroy, +}; + +void cdv_hdmi_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev, int reg) +{ + struct gma_encoder *gma_encoder; + struct gma_connector *gma_connector; + struct drm_connector *connector; + struct mid_intel_hdmi_priv *hdmi_priv; + struct gma_i2c_chan *ddc_bus; + int ddc_reg; + int ret; + + gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); + if (!gma_encoder) + return; + + gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); + if (!gma_connector) + goto err_free_encoder; + + hdmi_priv = kzalloc(sizeof(struct mid_intel_hdmi_priv), GFP_KERNEL); + if (!hdmi_priv) + goto err_free_connector; + + connector = &gma_connector->base; + connector->polled = DRM_CONNECTOR_POLL_HPD; + gma_connector->save = cdv_hdmi_save; + gma_connector->restore = cdv_hdmi_restore; + + switch (reg) { + case SDVOB: + ddc_reg = GPIOE; + gma_encoder->ddi_select = DDI0_SELECT; + break; + case SDVOC: + ddc_reg = GPIOD; + gma_encoder->ddi_select = DDI1_SELECT; + break; + default: + DRM_ERROR("unknown reg 0x%x for HDMI\n", reg); + goto err_free_hdmi_priv; + } + + ddc_bus = gma_i2c_create(dev, ddc_reg, + (reg == SDVOB) ? "HDMIB" : "HDMIC"); + if (!ddc_bus) { + dev_err(dev->dev, "No ddc adapter available!\n"); + goto err_free_hdmi_priv; + } + + ret = drm_connector_init_with_ddc(dev, connector, + &cdv_hdmi_connector_funcs, + DRM_MODE_CONNECTOR_DVID, + &ddc_bus->base); + if (ret) + goto err_ddc_destroy; + + ret = drm_simple_encoder_init(dev, &gma_encoder->base, + DRM_MODE_ENCODER_TMDS); + if (ret) + goto err_connector_cleanup; + + gma_connector_attach_encoder(gma_connector, gma_encoder); + gma_encoder->type = INTEL_OUTPUT_HDMI; + hdmi_priv->hdmi_reg = reg; + hdmi_priv->has_hdmi_sink = false; + gma_encoder->dev_priv = hdmi_priv; + + drm_encoder_helper_add(&gma_encoder->base, &cdv_hdmi_helper_funcs); + drm_connector_helper_add(connector, + &cdv_hdmi_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + drm_object_attach_property(&connector->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + + hdmi_priv->dev = dev; + return; + +err_connector_cleanup: + drm_connector_cleanup(connector); +err_ddc_destroy: + gma_i2c_destroy(ddc_bus); +err_free_hdmi_priv: + kfree(hdmi_priv); +err_free_connector: + kfree(gma_connector); +err_free_encoder: + kfree(gma_encoder); +} diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c new file mode 100644 index 000000000..be6efcaaa --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c @@ -0,0 +1,662 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2006-2011 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/dmi.h> +#include <linux/i2c.h> +#include <linux/pm_runtime.h> + +#include <drm/drm_simple_kms_helper.h> + +#include "cdv_device.h" +#include "intel_bios.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +/* + * LVDS I2C backlight control macros + */ +#define BRIGHTNESS_MAX_LEVEL 100 +#define BRIGHTNESS_MASK 0xFF +#define BLC_I2C_TYPE 0x01 +#define BLC_PWM_TYPT 0x02 + +#define BLC_POLARITY_NORMAL 0 +#define BLC_POLARITY_INVERSE 1 + +#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE) +#define PSB_BLC_MIN_PWM_REG_FREQ (0x2) +#define PSB_BLC_PWM_PRECISION_FACTOR (10) +#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) +#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) + +struct cdv_intel_lvds_priv { + /** + * Saved LVDO output states + */ + uint32_t savePP_ON; + uint32_t savePP_OFF; + uint32_t saveLVDS; + uint32_t savePP_CONTROL; + uint32_t savePP_CYCLE; + uint32_t savePFIT_CONTROL; + uint32_t savePFIT_PGM_RATIOS; + uint32_t saveBLC_PWM_CTL; +}; + +/* + * Returns the maximum level of the backlight duty cycle field. + */ +static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 retval; + + if (gma_power_begin(dev, false)) { + retval = ((REG_READ(BLC_PWM_CTL) & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + gma_power_end(dev); + } else + retval = ((dev_priv->regs.saveBLC_PWM_CTL & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + return retval; +} + +/* + * Sets the backlight level. + * + * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight(). + */ +static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 blc_pwm_ctl; + + if (gma_power_begin(dev, false)) { + blc_pwm_ctl = + REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + REG_WRITE(BLC_PWM_CTL, + (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); + gma_power_end(dev); + } else { + blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL & + ~BACKLIGHT_DUTY_CYCLE_MASK; + dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); + } +} + +/* + * Sets the power state for the panel. + */ +static void cdv_intel_lvds_set_power(struct drm_device *dev, + struct drm_encoder *encoder, bool on) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 pp_status; + + if (!gma_power_begin(dev, true)) + return; + + if (on) { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0); + + cdv_intel_lvds_set_backlight(dev, + dev_priv->mode_dev.backlight_duty_cycle); + } else { + cdv_intel_lvds_set_backlight(dev, 0); + + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while (pp_status & PP_ON); + } + gma_power_end(dev); +} + +static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + if (mode == DRM_MODE_DPMS_ON) + cdv_intel_lvds_set_power(dev, encoder, true); + else + cdv_intel_lvds_set_power(dev, encoder, false); + /* XXX: We never power down the LVDS pairs. */ +} + +static void cdv_intel_lvds_save(struct drm_connector *connector) +{ +} + +static void cdv_intel_lvds_restore(struct drm_connector *connector) +{ +} + +static enum drm_mode_status cdv_intel_lvds_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct drm_display_mode *fixed_mode = + dev_priv->mode_dev.panel_fixed_mode; + + /* just in case */ + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + /* just in case */ + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + return MODE_NO_INTERLACE; + + if (fixed_mode) { + if (mode->hdisplay > fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > fixed_mode->vdisplay) + return MODE_PANEL; + } + return MODE_OK; +} + +static bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + struct drm_encoder *tmp_encoder; + struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode; + + /* Should never happen!! */ + list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, + head) { + if (tmp_encoder != encoder + && tmp_encoder->crtc == encoder->crtc) { + pr_err("Can't enable LVDS and another encoder on the same pipe\n"); + return false; + } + } + + /* + * If we have timings from the BIOS for the panel, put them in + * to the adjusted mode. The CRTC will be set up for this mode, + * with the panel scaling set up to source from the H/VDisplay + * of the original mode. + */ + if (panel_fixed_mode != NULL) { + adjusted_mode->hdisplay = panel_fixed_mode->hdisplay; + adjusted_mode->hsync_start = panel_fixed_mode->hsync_start; + adjusted_mode->hsync_end = panel_fixed_mode->hsync_end; + adjusted_mode->htotal = panel_fixed_mode->htotal; + adjusted_mode->vdisplay = panel_fixed_mode->vdisplay; + adjusted_mode->vsync_start = panel_fixed_mode->vsync_start; + adjusted_mode->vsync_end = panel_fixed_mode->vsync_end; + adjusted_mode->vtotal = panel_fixed_mode->vtotal; + adjusted_mode->clock = panel_fixed_mode->clock; + drm_mode_set_crtcinfo(adjusted_mode, + CRTC_INTERLACE_HALVE_V); + } + + /* + * XXX: It would be nice to support lower refresh rates on the + * panels to reduce power consumption, and perhaps match the + * user's requested refresh rate. + */ + + return true; +} + +static void cdv_intel_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (!gma_power_begin(dev, true)) + return; + + mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + cdv_intel_lvds_set_power(dev, encoder, false); + + gma_power_end(dev); +} + +static void cdv_intel_lvds_commit(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (mode_dev->backlight_duty_cycle == 0) + mode_dev->backlight_duty_cycle = + cdv_intel_lvds_get_max_backlight(dev); + + cdv_intel_lvds_set_power(dev, encoder, true); +} + +static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc); + u32 pfit_control; + + /* + * The LVDS pin pair will already have been turned on in the + * cdv_intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + + /* + * Enable automatic panel scaling so that non-native modes fill the + * screen. Should be enabled before the pipe is enabled, according to + * register description and PRM. + */ + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) + pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + else + pfit_control = 0; + + pfit_control |= gma_crtc->pipe << PFIT_PIPE_SHIFT; + + if (dev_priv->lvds_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + + REG_WRITE(PFIT_CONTROL, pfit_control); +} + +/* + * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. + */ +static int cdv_intel_lvds_get_modes(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + int ret; + + ret = psb_intel_ddc_get_modes(connector, connector->ddc); + + if (ret) + return ret; + + if (mode_dev->panel_fixed_mode != NULL) { + struct drm_display_mode *mode = + drm_mode_duplicate(dev, mode_dev->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + return 1; + } + + return 0; +} + +static void cdv_intel_lvds_destroy(struct drm_connector *connector) +{ + struct gma_connector *gma_connector = to_gma_connector(connector); + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + + gma_i2c_destroy(to_gma_i2c_chan(connector->ddc)); + gma_i2c_destroy(gma_encoder->i2c_bus); + drm_connector_cleanup(connector); + kfree(gma_connector); +} + +static int cdv_intel_lvds_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_encoder *encoder = connector->encoder; + + if (!strcmp(property->name, "scaling mode") && encoder) { + struct gma_crtc *crtc = to_gma_crtc(encoder->crtc); + uint64_t curValue; + + if (!crtc) + return -1; + + switch (value) { + case DRM_MODE_SCALE_FULLSCREEN: + break; + case DRM_MODE_SCALE_NO_SCALE: + break; + case DRM_MODE_SCALE_ASPECT: + break; + default: + return -1; + } + + if (drm_object_property_get_value(&connector->base, + property, + &curValue)) + return -1; + + if (curValue == value) + return 0; + + if (drm_object_property_set_value(&connector->base, + property, + value)) + return -1; + + if (crtc->saved_mode.hdisplay != 0 && + crtc->saved_mode.vdisplay != 0) { + if (!drm_crtc_helper_set_mode(encoder->crtc, + &crtc->saved_mode, + encoder->crtc->x, + encoder->crtc->y, + encoder->crtc->primary->fb)) + return -1; + } + } else if (!strcmp(property->name, "backlight") && encoder) { + if (drm_object_property_set_value(&connector->base, + property, + value)) + return -1; + else + gma_backlight_set(encoder->dev, value); + } else if (!strcmp(property->name, "DPMS") && encoder) { + const struct drm_encoder_helper_funcs *helpers = + encoder->helper_private; + helpers->dpms(encoder, value); + } + return 0; +} + +static const struct drm_encoder_helper_funcs + cdv_intel_lvds_helper_funcs = { + .dpms = cdv_intel_lvds_encoder_dpms, + .mode_fixup = cdv_intel_lvds_mode_fixup, + .prepare = cdv_intel_lvds_prepare, + .mode_set = cdv_intel_lvds_mode_set, + .commit = cdv_intel_lvds_commit, +}; + +static const struct drm_connector_helper_funcs + cdv_intel_lvds_connector_helper_funcs = { + .get_modes = cdv_intel_lvds_get_modes, + .mode_valid = cdv_intel_lvds_mode_valid, + .best_encoder = gma_best_encoder, +}; + +static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = cdv_intel_lvds_set_property, + .destroy = cdv_intel_lvds_destroy, +}; + +/* + * Enumerate the child dev array parsed from VBT to check whether + * the LVDS is present. + * If it is present, return 1. + * If it is not present, return false. + * If no child dev is parsed from VBT, it assumes that the LVDS is present. + */ +static bool lvds_is_present_in_vbt(struct drm_device *dev, + u8 *i2c_pin) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int i; + + if (!dev_priv->child_dev_num) + return true; + + for (i = 0; i < dev_priv->child_dev_num; i++) { + struct child_device_config *child = dev_priv->child_dev + i; + + /* If the device type is not LFP, continue. + * We have to check both the new identifiers as well as the + * old for compatibility with some BIOSes. + */ + if (child->device_type != DEVICE_TYPE_INT_LFP && + child->device_type != DEVICE_TYPE_LFP) + continue; + + if (child->i2c_pin) + *i2c_pin = child->i2c_pin; + + /* However, we cannot trust the BIOS writers to populate + * the VBT correctly. Since LVDS requires additional + * information from AIM blocks, a non-zero addin offset is + * a good indicator that the LVDS is actually present. + */ + if (child->addin_offset) + return true; + + /* But even then some BIOS writers perform some black magic + * and instantiate the device without reference to any + * additional data. Trust that if the VBT was written into + * the OpRegion then they have validated the LVDS's existence. + */ + if (dev_priv->opregion.vbt) + return true; + } + + return false; +} + +/** + * cdv_intel_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * @mode_dev: PSB mode device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void cdv_intel_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct gma_encoder *gma_encoder; + struct gma_connector *gma_connector; + struct cdv_intel_lvds_priv *lvds_priv; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_display_mode *scan; + struct drm_crtc *crtc; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_i2c_chan *ddc_bus; + u32 lvds; + int pipe; + int ret; + u8 pin; + + if (!dev_priv->lvds_enabled_in_vbt) + return; + + pin = GMBUS_PORT_PANEL; + if (!lvds_is_present_in_vbt(dev, &pin)) { + DRM_DEBUG_KMS("LVDS is not present in VBT\n"); + return; + } + + gma_encoder = kzalloc(sizeof(struct gma_encoder), + GFP_KERNEL); + if (!gma_encoder) + return; + + gma_connector = kzalloc(sizeof(struct gma_connector), + GFP_KERNEL); + if (!gma_connector) + goto err_free_encoder; + + lvds_priv = kzalloc(sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL); + if (!lvds_priv) + goto err_free_connector; + + gma_encoder->dev_priv = lvds_priv; + + connector = &gma_connector->base; + gma_connector->save = cdv_intel_lvds_save; + gma_connector->restore = cdv_intel_lvds_restore; + encoder = &gma_encoder->base; + + /* Set up the DDC bus. */ + ddc_bus = gma_i2c_create(dev, GPIOC, "LVDSDDC_C"); + if (!ddc_bus) { + dev_printk(KERN_ERR, dev->dev, + "DDC bus registration " "failed.\n"); + goto err_free_lvds_priv; + } + + ret = drm_connector_init_with_ddc(dev, connector, + &cdv_intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS, + &ddc_bus->base); + if (ret) + goto err_destroy_ddc; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); + if (ret) + goto err_connector_cleanup; + + gma_connector_attach_encoder(gma_connector, gma_encoder); + gma_encoder->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs); + drm_connector_helper_add(connector, + &cdv_intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + /*Attach connector properties*/ + drm_object_attach_property(&connector->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + drm_object_attach_property(&connector->base, + dev_priv->backlight_property, + BRIGHTNESS_MAX_LEVEL); + + /** + * Set up I2C bus + * FIXME: distroy i2c_bus when exit + */ + gma_encoder->i2c_bus = gma_i2c_create(dev, GPIOB, "LVDSBLC_B"); + if (!gma_encoder->i2c_bus) { + dev_printk(KERN_ERR, + dev->dev, "I2C bus registration failed.\n"); + goto err_encoder_cleanup; + } + gma_encoder->i2c_bus->slave_addr = 0x2C; + dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus; + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + mutex_lock(&dev->mode_config.mutex); + psb_intel_ddc_get_modes(connector, &ddc_bus->base); + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + goto out; /* FIXME: check for quirks */ + } + } + + /* Failed to get EDID, what about VBT? do we need this?*/ + if (dev_priv->lfp_lvds_vbt_mode) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + } + /* + * If we didn't get EDID, try checking if the panel is already turned + * on. If so, assume that whatever is currently programmed is the + * correct mode. + */ + lvds = REG_READ(LVDS); + pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; + crtc = psb_intel_get_crtc_from_pipe(dev, pipe); + + if (crtc && (lvds & LVDS_PORT_EN)) { + mode_dev->panel_fixed_mode = + cdv_intel_crtc_mode_get(dev, crtc); + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + } + + /* If we still don't have a mode after all that, give up. */ + if (!mode_dev->panel_fixed_mode) { + DRM_DEBUG + ("Found no modes on the lvds, ignoring the LVDS\n"); + goto err_unlock; + } + + /* setup PWM */ + { + u32 pwm; + + pwm = REG_READ(BLC_PWM_CTL2); + if (pipe == 1) + pwm |= PWM_PIPE_B; + else + pwm &= ~PWM_PIPE_B; + pwm |= PWM_ENABLE; + REG_WRITE(BLC_PWM_CTL2, pwm); + } + +out: + mutex_unlock(&dev->mode_config.mutex); + return; + +err_unlock: + mutex_unlock(&dev->mode_config.mutex); + gma_i2c_destroy(gma_encoder->i2c_bus); +err_encoder_cleanup: + drm_encoder_cleanup(encoder); +err_connector_cleanup: + drm_connector_cleanup(connector); +err_destroy_ddc: + gma_i2c_destroy(ddc_bus); +err_free_lvds_priv: + kfree(lvds_priv); +err_free_connector: + kfree(gma_connector); +err_free_encoder: + kfree(gma_encoder); +} diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c new file mode 100644 index 000000000..aa3ecf771 --- /dev/null +++ b/drivers/gpu/drm/gma500/framebuffer.c @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2007-2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/pfn_t.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/tty.h> + +#include <drm/drm.h> +#include <drm/drm_crtc.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_gem_framebuffer_helper.h> + +#include "framebuffer.h" +#include "gem.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +static const struct drm_framebuffer_funcs psb_fb_funcs = { + .destroy = drm_gem_fb_destroy, + .create_handle = drm_gem_fb_create_handle, +}; + +#define CMAP_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16) + +static int psbfb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + struct drm_fb_helper *fb_helper = info->par; + struct drm_framebuffer *fb = fb_helper->fb; + uint32_t v; + + if (!fb) + return -ENOMEM; + + if (regno > 255) + return 1; + + red = CMAP_TOHW(red, info->var.red.length); + blue = CMAP_TOHW(blue, info->var.blue.length); + green = CMAP_TOHW(green, info->var.green.length); + transp = CMAP_TOHW(transp, info->var.transp.length); + + v = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset) | + (transp << info->var.transp.offset); + + if (regno < 16) { + switch (fb->format->cpp[0] * 8) { + case 16: + ((uint32_t *) info->pseudo_palette)[regno] = v; + break; + case 24: + case 32: + ((uint32_t *) info->pseudo_palette)[regno] = v; + break; + } + } + + return 0; +} + +static vm_fault_t psbfb_vm_fault(struct vm_fault *vmf) +{ + struct vm_area_struct *vma = vmf->vma; + struct drm_framebuffer *fb = vma->vm_private_data; + struct drm_device *dev = fb->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_gem_object *pobj = to_psb_gem_object(fb->obj[0]); + int page_num; + int i; + unsigned long address; + vm_fault_t ret = VM_FAULT_SIGBUS; + unsigned long pfn; + unsigned long phys_addr = (unsigned long)dev_priv->stolen_base + pobj->offset; + + page_num = vma_pages(vma); + address = vmf->address - (vmf->pgoff << PAGE_SHIFT); + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + for (i = 0; i < page_num; i++) { + pfn = (phys_addr >> PAGE_SHIFT); + + ret = vmf_insert_mixed(vma, address, + __pfn_to_pfn_t(pfn, PFN_DEV)); + if (unlikely(ret & VM_FAULT_ERROR)) + break; + address += PAGE_SIZE; + phys_addr += PAGE_SIZE; + } + return ret; +} + +static void psbfb_vm_open(struct vm_area_struct *vma) +{ +} + +static void psbfb_vm_close(struct vm_area_struct *vma) +{ +} + +static const struct vm_operations_struct psbfb_vm_ops = { + .fault = psbfb_vm_fault, + .open = psbfb_vm_open, + .close = psbfb_vm_close +}; + +static int psbfb_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + struct drm_fb_helper *fb_helper = info->par; + struct drm_framebuffer *fb = fb_helper->fb; + + if (vma->vm_pgoff != 0) + return -EINVAL; + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) + return -EINVAL; + + /* + * If this is a GEM object then info->screen_base is the virtual + * kernel remapping of the object. FIXME: Review if this is + * suitable for our mmap work + */ + vma->vm_ops = &psbfb_vm_ops; + vma->vm_private_data = (void *)fb; + vma->vm_flags |= VM_IO | VM_MIXEDMAP | VM_DONTEXPAND | VM_DONTDUMP; + return 0; +} + +static const struct fb_ops psbfb_unaccel_ops = { + .owner = THIS_MODULE, + DRM_FB_HELPER_DEFAULT_OPS, + .fb_setcolreg = psbfb_setcolreg, + .fb_fillrect = drm_fb_helper_cfb_fillrect, + .fb_copyarea = drm_fb_helper_cfb_copyarea, + .fb_imageblit = drm_fb_helper_cfb_imageblit, + .fb_mmap = psbfb_mmap, +}; + +/** + * psb_framebuffer_init - initialize a framebuffer + * @dev: our DRM device + * @fb: framebuffer to set up + * @mode_cmd: mode description + * @obj: backing object + * + * Configure and fill in the boilerplate for our frame buffer. Return + * 0 on success or an error code if we fail. + */ +static int psb_framebuffer_init(struct drm_device *dev, + struct drm_framebuffer *fb, + const struct drm_mode_fb_cmd2 *mode_cmd, + struct drm_gem_object *obj) +{ + const struct drm_format_info *info; + int ret; + + /* + * Reject unknown formats, YUV formats, and formats with more than + * 4 bytes per pixel. + */ + info = drm_get_format_info(dev, mode_cmd); + if (!info || !info->depth || info->cpp[0] > 4) + return -EINVAL; + + if (mode_cmd->pitches[0] & 63) + return -EINVAL; + + drm_helper_mode_fill_fb_struct(dev, fb, mode_cmd); + fb->obj[0] = obj; + ret = drm_framebuffer_init(dev, fb, &psb_fb_funcs); + if (ret) { + dev_err(dev->dev, "framebuffer init failed: %d\n", ret); + return ret; + } + return 0; +} + +/** + * psb_framebuffer_create - create a framebuffer backed by gt + * @dev: our DRM device + * @mode_cmd: the description of the requested mode + * @obj: the backing object + * + * Create a framebuffer object backed by the gt, and fill in the + * boilerplate required + * + * TODO: review object references + */ + +static struct drm_framebuffer *psb_framebuffer_create + (struct drm_device *dev, + const struct drm_mode_fb_cmd2 *mode_cmd, + struct drm_gem_object *obj) +{ + struct drm_framebuffer *fb; + int ret; + + fb = kzalloc(sizeof(*fb), GFP_KERNEL); + if (!fb) + return ERR_PTR(-ENOMEM); + + ret = psb_framebuffer_init(dev, fb, mode_cmd, obj); + if (ret) { + kfree(fb); + return ERR_PTR(ret); + } + return fb; +} + +/** + * psbfb_create - create a framebuffer + * @fb_helper: the framebuffer helper + * @sizes: specification of the layout + * + * Create a framebuffer to the specifications provided + */ +static int psbfb_create(struct drm_fb_helper *fb_helper, + struct drm_fb_helper_surface_size *sizes) +{ + struct drm_device *dev = fb_helper->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct fb_info *info; + struct drm_framebuffer *fb; + struct drm_mode_fb_cmd2 mode_cmd; + int size; + int ret; + struct psb_gem_object *backing; + struct drm_gem_object *obj; + u32 bpp, depth; + + mode_cmd.width = sizes->surface_width; + mode_cmd.height = sizes->surface_height; + bpp = sizes->surface_bpp; + depth = sizes->surface_depth; + + /* No 24bit packed */ + if (bpp == 24) + bpp = 32; + + mode_cmd.pitches[0] = ALIGN(mode_cmd.width * DIV_ROUND_UP(bpp, 8), 64); + + size = mode_cmd.pitches[0] * mode_cmd.height; + size = ALIGN(size, PAGE_SIZE); + + /* Allocate the framebuffer in the GTT with stolen page backing */ + backing = psb_gem_create(dev, size, "fb", true, PAGE_SIZE); + if (IS_ERR(backing)) + return PTR_ERR(backing); + obj = &backing->base; + + memset(dev_priv->vram_addr + backing->offset, 0, size); + + info = drm_fb_helper_alloc_fbi(fb_helper); + if (IS_ERR(info)) { + ret = PTR_ERR(info); + goto err_drm_gem_object_put; + } + + mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); + + fb = psb_framebuffer_create(dev, &mode_cmd, obj); + if (IS_ERR(fb)) { + ret = PTR_ERR(fb); + goto err_drm_gem_object_put; + } + + fb_helper->fb = fb; + + info->fbops = &psbfb_unaccel_ops; + + info->fix.smem_start = dev->mode_config.fb_base; + info->fix.smem_len = size; + info->fix.ywrapstep = 0; + info->fix.ypanstep = 0; + + /* Accessed stolen memory directly */ + info->screen_base = dev_priv->vram_addr + backing->offset; + info->screen_size = size; + + if (dev_priv->gtt.stolen_size) { + info->apertures->ranges[0].base = dev->mode_config.fb_base; + info->apertures->ranges[0].size = dev_priv->gtt.stolen_size; + } + + drm_fb_helper_fill_info(info, fb_helper, sizes); + + info->fix.mmio_start = pci_resource_start(pdev, 0); + info->fix.mmio_len = pci_resource_len(pdev, 0); + + /* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */ + + dev_dbg(dev->dev, "allocated %dx%d fb\n", fb->width, fb->height); + + return 0; + +err_drm_gem_object_put: + drm_gem_object_put(obj); + return ret; +} + +/** + * psb_user_framebuffer_create - create framebuffer + * @dev: our DRM device + * @filp: client file + * @cmd: mode request + * + * Create a new framebuffer backed by a userspace GEM object + */ +static struct drm_framebuffer *psb_user_framebuffer_create + (struct drm_device *dev, struct drm_file *filp, + const struct drm_mode_fb_cmd2 *cmd) +{ + struct drm_gem_object *obj; + struct drm_framebuffer *fb; + + /* + * Find the GEM object and thus the gtt range object that is + * to back this space + */ + obj = drm_gem_object_lookup(filp, cmd->handles[0]); + if (obj == NULL) + return ERR_PTR(-ENOENT); + + /* Let the core code do all the work */ + fb = psb_framebuffer_create(dev, cmd, obj); + if (IS_ERR(fb)) + drm_gem_object_put(obj); + + return fb; +} + +static int psbfb_probe(struct drm_fb_helper *fb_helper, + struct drm_fb_helper_surface_size *sizes) +{ + struct drm_device *dev = fb_helper->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned int fb_size; + int bytespp; + + bytespp = sizes->surface_bpp / 8; + if (bytespp == 3) /* no 24bit packed */ + bytespp = 4; + + /* If the mode will not fit in 32bit then switch to 16bit to get + a console on full resolution. The X mode setting server will + allocate its own 32bit GEM framebuffer */ + fb_size = ALIGN(sizes->surface_width * bytespp, 64) * + sizes->surface_height; + fb_size = ALIGN(fb_size, PAGE_SIZE); + + if (fb_size > dev_priv->vram_stolen_size) { + sizes->surface_bpp = 16; + sizes->surface_depth = 16; + } + + return psbfb_create(fb_helper, sizes); +} + +static const struct drm_fb_helper_funcs psb_fb_helper_funcs = { + .fb_probe = psbfb_probe, +}; + +static int psb_fbdev_destroy(struct drm_device *dev, + struct drm_fb_helper *fb_helper) +{ + struct drm_framebuffer *fb = fb_helper->fb; + + drm_fb_helper_unregister_fbi(fb_helper); + + drm_fb_helper_fini(fb_helper); + drm_framebuffer_unregister_private(fb); + drm_framebuffer_cleanup(fb); + + if (fb->obj[0]) + drm_gem_object_put(fb->obj[0]); + kfree(fb); + + return 0; +} + +int psb_fbdev_init(struct drm_device *dev) +{ + struct drm_fb_helper *fb_helper; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int ret; + + fb_helper = kzalloc(sizeof(*fb_helper), GFP_KERNEL); + if (!fb_helper) { + dev_err(dev->dev, "no memory\n"); + return -ENOMEM; + } + + dev_priv->fb_helper = fb_helper; + + drm_fb_helper_prepare(dev, fb_helper, &psb_fb_helper_funcs); + + ret = drm_fb_helper_init(dev, fb_helper); + if (ret) + goto free; + + /* disable all the possible outputs/crtcs before entering KMS mode */ + drm_helper_disable_unused_functions(dev); + + ret = drm_fb_helper_initial_config(fb_helper, 32); + if (ret) + goto fini; + + return 0; + +fini: + drm_fb_helper_fini(fb_helper); +free: + kfree(fb_helper); + return ret; +} + +static void psb_fbdev_fini(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (!dev_priv->fb_helper) + return; + + psb_fbdev_destroy(dev, dev_priv->fb_helper); + kfree(dev_priv->fb_helper); + dev_priv->fb_helper = NULL; +} + +static const struct drm_mode_config_funcs psb_mode_funcs = { + .fb_create = psb_user_framebuffer_create, + .output_poll_changed = drm_fb_helper_output_poll_changed, +}; + +static void psb_setup_outputs(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + + drm_mode_create_scaling_mode_property(dev); + + /* It is ok for this to fail - we just don't get backlight control */ + if (!dev_priv->backlight_property) + dev_priv->backlight_property = drm_property_create_range(dev, 0, + "backlight", 0, 100); + dev_priv->ops->output_init(dev); + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct drm_encoder *encoder = &gma_encoder->base; + int crtc_mask = 0, clone_mask = 0; + + /* valid crtcs */ + switch (gma_encoder->type) { + case INTEL_OUTPUT_ANALOG: + crtc_mask = (1 << 0); + clone_mask = (1 << INTEL_OUTPUT_ANALOG); + break; + case INTEL_OUTPUT_SDVO: + crtc_mask = dev_priv->ops->sdvo_mask; + clone_mask = 0; + break; + case INTEL_OUTPUT_LVDS: + crtc_mask = dev_priv->ops->lvds_mask; + clone_mask = 0; + break; + case INTEL_OUTPUT_MIPI: + crtc_mask = (1 << 0); + clone_mask = 0; + break; + case INTEL_OUTPUT_MIPI2: + crtc_mask = (1 << 2); + clone_mask = 0; + break; + case INTEL_OUTPUT_HDMI: + crtc_mask = dev_priv->ops->hdmi_mask; + clone_mask = (1 << INTEL_OUTPUT_HDMI); + break; + case INTEL_OUTPUT_DISPLAYPORT: + crtc_mask = (1 << 0) | (1 << 1); + clone_mask = 0; + break; + case INTEL_OUTPUT_EDP: + crtc_mask = (1 << 1); + clone_mask = 0; + } + encoder->possible_crtcs = crtc_mask; + encoder->possible_clones = + gma_connector_clones(dev, clone_mask); + } + drm_connector_list_iter_end(&conn_iter); +} + +void psb_modeset_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + int i; + + if (drmm_mode_config_init(dev)) + return; + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + + dev->mode_config.funcs = &psb_mode_funcs; + + /* set memory base */ + /* Oaktrail and Poulsbo should use BAR 2*/ + pci_read_config_dword(pdev, PSB_BSM, (u32 *)&(dev->mode_config.fb_base)); + + /* num pipes is 2 for PSB but 1 for Mrst */ + for (i = 0; i < dev_priv->num_pipe; i++) + psb_intel_crtc_init(dev, i, mode_dev); + + dev->mode_config.max_width = 4096; + dev->mode_config.max_height = 4096; + + psb_setup_outputs(dev); + + if (dev_priv->ops->errata) + dev_priv->ops->errata(dev); + + dev_priv->modeset = true; +} + +void psb_modeset_cleanup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + if (dev_priv->modeset) { + drm_kms_helper_poll_fini(dev); + psb_fbdev_fini(dev); + } +} diff --git a/drivers/gpu/drm/gma500/framebuffer.h b/drivers/gpu/drm/gma500/framebuffer.h new file mode 100644 index 000000000..2fbba4b48 --- /dev/null +++ b/drivers/gpu/drm/gma500/framebuffer.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2008-2011, Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#ifndef _FRAMEBUFFER_H_ +#define _FRAMEBUFFER_H_ + +#include "psb_drv.h" + +extern int gma_connector_clones(struct drm_device *dev, int type_mask); + +#endif + diff --git a/drivers/gpu/drm/gma500/gem.c b/drivers/gpu/drm/gma500/gem.c new file mode 100644 index 000000000..4b7627a72 --- /dev/null +++ b/drivers/gpu/drm/gma500/gem.c @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * psb GEM interface + * + * Copyright (c) 2011, Intel Corporation. + * + * Authors: Alan Cox + * + * TODO: + * - we need to work out if the MMU is relevant (eg for + * accelerated operations on a GEM object) + */ + +#include <linux/pagemap.h> + +#include <asm/set_memory.h> + +#include <drm/drm.h> +#include <drm/drm_vma_manager.h> + +#include "gem.h" +#include "psb_drv.h" + +/* + * PSB GEM object + */ + +int psb_gem_pin(struct psb_gem_object *pobj) +{ + struct drm_gem_object *obj = &pobj->base; + struct drm_device *dev = obj->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 gpu_base = dev_priv->gtt.gatt_start; + struct page **pages; + unsigned int npages; + int ret; + + ret = dma_resv_lock(obj->resv, NULL); + if (drm_WARN_ONCE(dev, ret, "dma_resv_lock() failed, ret=%d\n", ret)) + return ret; + + if (pobj->in_gart || pobj->stolen) + goto out; /* already mapped */ + + pages = drm_gem_get_pages(obj); + if (IS_ERR(pages)) { + ret = PTR_ERR(pages); + goto err_dma_resv_unlock; + } + + npages = obj->size / PAGE_SIZE; + + set_pages_array_wc(pages, npages); + + psb_gtt_insert_pages(dev_priv, &pobj->resource, pages); + psb_mmu_insert_pages(psb_mmu_get_default_pd(dev_priv->mmu), pages, + (gpu_base + pobj->offset), npages, 0, 0, + PSB_MMU_CACHED_MEMORY); + + pobj->pages = pages; + +out: + ++pobj->in_gart; + dma_resv_unlock(obj->resv); + + return 0; + +err_dma_resv_unlock: + dma_resv_unlock(obj->resv); + return ret; +} + +void psb_gem_unpin(struct psb_gem_object *pobj) +{ + struct drm_gem_object *obj = &pobj->base; + struct drm_device *dev = obj->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 gpu_base = dev_priv->gtt.gatt_start; + unsigned long npages; + int ret; + + ret = dma_resv_lock(obj->resv, NULL); + if (drm_WARN_ONCE(dev, ret, "dma_resv_lock() failed, ret=%d\n", ret)) + return; + + WARN_ON(!pobj->in_gart); + + --pobj->in_gart; + + if (pobj->in_gart || pobj->stolen) + goto out; + + npages = obj->size / PAGE_SIZE; + + psb_mmu_remove_pages(psb_mmu_get_default_pd(dev_priv->mmu), + (gpu_base + pobj->offset), npages, 0, 0); + psb_gtt_remove_pages(dev_priv, &pobj->resource); + + /* Reset caching flags */ + set_pages_array_wb(pobj->pages, npages); + + drm_gem_put_pages(obj, pobj->pages, true, false); + pobj->pages = NULL; + +out: + dma_resv_unlock(obj->resv); +} + +static vm_fault_t psb_gem_fault(struct vm_fault *vmf); + +static void psb_gem_free_object(struct drm_gem_object *obj) +{ + struct psb_gem_object *pobj = to_psb_gem_object(obj); + + /* Undo the mmap pin if we are destroying the object */ + if (pobj->mmapping) + psb_gem_unpin(pobj); + + drm_gem_object_release(obj); + + WARN_ON(pobj->in_gart && !pobj->stolen); + + release_resource(&pobj->resource); + kfree(pobj); +} + +static const struct vm_operations_struct psb_gem_vm_ops = { + .fault = psb_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, +}; + +static const struct drm_gem_object_funcs psb_gem_object_funcs = { + .free = psb_gem_free_object, + .vm_ops = &psb_gem_vm_ops, +}; + +struct psb_gem_object * +psb_gem_create(struct drm_device *dev, u64 size, const char *name, bool stolen, u32 align) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_gem_object *pobj; + struct drm_gem_object *obj; + int ret; + + size = roundup(size, PAGE_SIZE); + + pobj = kzalloc(sizeof(*pobj), GFP_KERNEL); + if (!pobj) + return ERR_PTR(-ENOMEM); + obj = &pobj->base; + + /* GTT resource */ + + ret = psb_gtt_allocate_resource(dev_priv, &pobj->resource, name, size, align, stolen, + &pobj->offset); + if (ret) + goto err_kfree; + + if (stolen) { + pobj->stolen = true; + pobj->in_gart = 1; + } + + /* GEM object */ + + obj->funcs = &psb_gem_object_funcs; + + if (stolen) { + drm_gem_private_object_init(dev, obj, size); + } else { + ret = drm_gem_object_init(dev, obj, size); + if (ret) + goto err_release_resource; + + /* Limit the object to 32-bit mappings */ + mapping_set_gfp_mask(obj->filp->f_mapping, GFP_KERNEL | __GFP_DMA32); + } + + return pobj; + +err_release_resource: + release_resource(&pobj->resource); +err_kfree: + kfree(pobj); + return ERR_PTR(ret); +} + +/** + * psb_gem_dumb_create - create a dumb buffer + * @file: our client file + * @dev: our device + * @args: the requested arguments copied from userspace + * + * Allocate a buffer suitable for use for a frame buffer of the + * form described by user space. Give userspace a handle by which + * to reference it. + */ +int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + size_t pitch, size; + struct psb_gem_object *pobj; + struct drm_gem_object *obj; + u32 handle; + int ret; + + pitch = args->width * DIV_ROUND_UP(args->bpp, 8); + pitch = ALIGN(pitch, 64); + + size = pitch * args->height; + size = roundup(size, PAGE_SIZE); + if (!size) + return -EINVAL; + + pobj = psb_gem_create(dev, size, "gem", false, PAGE_SIZE); + if (IS_ERR(pobj)) + return PTR_ERR(pobj); + obj = &pobj->base; + + ret = drm_gem_handle_create(file, obj, &handle); + if (ret) + goto err_drm_gem_object_put; + + drm_gem_object_put(obj); + + args->pitch = pitch; + args->size = size; + args->handle = handle; + + return 0; + +err_drm_gem_object_put: + drm_gem_object_put(obj); + return ret; +} + +/** + * psb_gem_fault - pagefault handler for GEM objects + * @vmf: fault detail + * + * Invoked when a fault occurs on an mmap of a GEM managed area. GEM + * does most of the work for us including the actual map/unmap calls + * but we need to do the actual page work. + * + * This code eventually needs to handle faulting objects in and out + * of the GTT and repacking it when we run out of space. We can put + * that off for now and for our simple uses + * + * The VMA was set up by GEM. In doing so it also ensured that the + * vma->vm_private_data points to the GEM object that is backing this + * mapping. + */ +static vm_fault_t psb_gem_fault(struct vm_fault *vmf) +{ + struct vm_area_struct *vma = vmf->vma; + struct drm_gem_object *obj; + struct psb_gem_object *pobj; + int err; + vm_fault_t ret; + unsigned long pfn; + pgoff_t page_offset; + struct drm_device *dev; + struct drm_psb_private *dev_priv; + + obj = vma->vm_private_data; /* GEM object */ + dev = obj->dev; + dev_priv = to_drm_psb_private(dev); + + pobj = to_psb_gem_object(obj); + + /* Make sure we don't parallel update on a fault, nor move or remove + something from beneath our feet */ + mutex_lock(&dev_priv->mmap_mutex); + + /* For now the mmap pins the object and it stays pinned. As things + stand that will do us no harm */ + if (pobj->mmapping == 0) { + err = psb_gem_pin(pobj); + if (err < 0) { + dev_err(dev->dev, "gma500: pin failed: %d\n", err); + ret = vmf_error(err); + goto fail; + } + pobj->mmapping = 1; + } + + /* Page relative to the VMA start - we must calculate this ourselves + because vmf->pgoff is the fake GEM offset */ + page_offset = (vmf->address - vma->vm_start) >> PAGE_SHIFT; + + /* CPU view of the page, don't go via the GART for CPU writes */ + if (pobj->stolen) + pfn = (dev_priv->stolen_base + pobj->offset) >> PAGE_SHIFT; + else + pfn = page_to_pfn(pobj->pages[page_offset]); + ret = vmf_insert_pfn(vma, vmf->address, pfn); +fail: + mutex_unlock(&dev_priv->mmap_mutex); + + return ret; +} + +/* + * Memory management + */ + +/* Insert vram stolen pages into the GTT. */ +static void psb_gem_mm_populate_stolen(struct drm_psb_private *pdev) +{ + struct drm_device *dev = &pdev->dev; + unsigned int pfn_base; + unsigned int i, num_pages; + uint32_t pte; + + pfn_base = pdev->stolen_base >> PAGE_SHIFT; + num_pages = pdev->vram_stolen_size >> PAGE_SHIFT; + + drm_dbg(dev, "Set up %u stolen pages starting at 0x%08x, GTT offset %dK\n", + num_pages, pfn_base << PAGE_SHIFT, 0); + + for (i = 0; i < num_pages; ++i) { + pte = psb_gtt_mask_pte(pfn_base + i, PSB_MMU_CACHED_MEMORY); + iowrite32(pte, pdev->gtt_map + i); + } + + (void)ioread32(pdev->gtt_map + i - 1); +} + +int psb_gem_mm_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + unsigned long stolen_size, vram_stolen_size; + struct psb_gtt *pg; + int ret; + + mutex_init(&dev_priv->mmap_mutex); + + pg = &dev_priv->gtt; + + pci_read_config_dword(pdev, PSB_BSM, &dev_priv->stolen_base); + vram_stolen_size = pg->gtt_phys_start - dev_priv->stolen_base - PAGE_SIZE; + + stolen_size = vram_stolen_size; + + dev_dbg(dev->dev, "Stolen memory base 0x%x, size %luK\n", + dev_priv->stolen_base, vram_stolen_size / 1024); + + pg->stolen_size = stolen_size; + dev_priv->vram_stolen_size = vram_stolen_size; + + dev_priv->vram_addr = ioremap_wc(dev_priv->stolen_base, stolen_size); + if (!dev_priv->vram_addr) { + dev_err(dev->dev, "Failure to map stolen base.\n"); + ret = -ENOMEM; + goto err_mutex_destroy; + } + + psb_gem_mm_populate_stolen(dev_priv); + + return 0; + +err_mutex_destroy: + mutex_destroy(&dev_priv->mmap_mutex); + return ret; +} + +void psb_gem_mm_fini(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + iounmap(dev_priv->vram_addr); + + mutex_destroy(&dev_priv->mmap_mutex); +} + +/* Re-insert all pinned GEM objects into GTT. */ +static void psb_gem_mm_populate_resources(struct drm_psb_private *pdev) +{ + unsigned int restored = 0, total = 0, size = 0; + struct resource *r = pdev->gtt_mem->child; + struct drm_device *dev = &pdev->dev; + struct psb_gem_object *pobj; + + while (r) { + /* + * TODO: GTT restoration needs a refactoring, so that we don't have to touch + * struct psb_gem_object here. The type represents a GEM object and is + * not related to the GTT itself. + */ + pobj = container_of(r, struct psb_gem_object, resource); + if (pobj->pages) { + psb_gtt_insert_pages(pdev, &pobj->resource, pobj->pages); + size += resource_size(&pobj->resource); + ++restored; + } + r = r->sibling; + ++total; + } + + drm_dbg(dev, "Restored %u of %u gtt ranges (%u KB)", restored, total, (size / 1024)); +} + +int psb_gem_mm_resume(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + unsigned long stolen_size, vram_stolen_size; + struct psb_gtt *pg; + + pg = &dev_priv->gtt; + + pci_read_config_dword(pdev, PSB_BSM, &dev_priv->stolen_base); + vram_stolen_size = pg->gtt_phys_start - dev_priv->stolen_base - PAGE_SIZE; + + stolen_size = vram_stolen_size; + + dev_dbg(dev->dev, "Stolen memory base 0x%x, size %luK\n", dev_priv->stolen_base, + vram_stolen_size / 1024); + + if (stolen_size != pg->stolen_size) { + dev_err(dev->dev, "GTT resume error.\n"); + return -EINVAL; + } + + psb_gem_mm_populate_stolen(dev_priv); + psb_gem_mm_populate_resources(dev_priv); + + return 0; +} diff --git a/drivers/gpu/drm/gma500/gem.h b/drivers/gpu/drm/gma500/gem.h new file mode 100644 index 000000000..27df6ff4e --- /dev/null +++ b/drivers/gpu/drm/gma500/gem.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2014 Patrik Jakobsson + * All Rights Reserved. + * + **************************************************************************/ + +#ifndef _GEM_H +#define _GEM_H + +#include <linux/kernel.h> + +#include <drm/drm_gem.h> + +struct drm_device; + +/* + * PSB GEM object + */ + +struct psb_gem_object { + struct drm_gem_object base; + + struct resource resource; /* GTT resource for our allocation */ + u32 offset; /* GTT offset of our object */ + int in_gart; /* Currently in the GART (ref ct) */ + bool stolen; /* Backed from stolen RAM */ + bool mmapping; /* Is mmappable */ + struct page **pages; /* Backing pages if present */ +}; + +static inline struct psb_gem_object *to_psb_gem_object(struct drm_gem_object *obj) +{ + return container_of(obj, struct psb_gem_object, base); +} + +struct psb_gem_object * +psb_gem_create(struct drm_device *dev, u64 size, const char *name, bool stolen, u32 align); + +int psb_gem_pin(struct psb_gem_object *pobj); +void psb_gem_unpin(struct psb_gem_object *pobj); + +/* + * Memory management + */ + +int psb_gem_mm_init(struct drm_device *dev); +void psb_gem_mm_fini(struct drm_device *dev); +int psb_gem_mm_resume(struct drm_device *dev); + +#endif diff --git a/drivers/gpu/drm/gma500/gma_device.c b/drivers/gpu/drm/gma500/gma_device.c new file mode 100644 index 000000000..954f3a275 --- /dev/null +++ b/drivers/gpu/drm/gma500/gma_device.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#include "psb_drv.h" +#include "gma_device.h" + +void gma_get_core_freq(struct drm_device *dev) +{ + uint32_t clock; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct pci_dev *pci_root = + pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), + 0, 0); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + /*pci_write_config_dword(pci_root, 0xD4, 0x00C32004);*/ + /*pci_write_config_dword(pci_root, 0xD0, 0xE0033000);*/ + + pci_write_config_dword(pci_root, 0xD0, 0xD0050300); + pci_read_config_dword(pci_root, 0xD4, &clock); + pci_dev_put(pci_root); + + switch (clock & 0x07) { + case 0: + dev_priv->core_freq = 100; + break; + case 1: + dev_priv->core_freq = 133; + break; + case 2: + dev_priv->core_freq = 150; + break; + case 3: + dev_priv->core_freq = 178; + break; + case 4: + dev_priv->core_freq = 200; + break; + case 5: + case 6: + case 7: + dev_priv->core_freq = 266; + break; + default: + dev_priv->core_freq = 0; + } +} diff --git a/drivers/gpu/drm/gma500/gma_device.h b/drivers/gpu/drm/gma500/gma_device.h new file mode 100644 index 000000000..a8cf31d4b --- /dev/null +++ b/drivers/gpu/drm/gma500/gma_device.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#ifndef _GMA_DEVICE_H +#define _GMA_DEVICE_H +struct drm_device; + +extern void gma_get_core_freq(struct drm_device *dev); + +#endif diff --git a/drivers/gpu/drm/gma500/gma_display.c b/drivers/gpu/drm/gma500/gma_display.c new file mode 100644 index 000000000..fe7b8436f --- /dev/null +++ b/drivers/gpu/drm/gma500/gma_display.c @@ -0,0 +1,809 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2006-2011 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Patrik Jakobsson <patrik.r.jakobsson@gmail.com> + */ + +#include <linux/delay.h> +#include <linux/highmem.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_vblank.h> + +#include "framebuffer.h" +#include "gem.h" +#include "gma_display.h" +#include "psb_irq.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +/* + * Returns whether any output on the specified pipe is of the specified type + */ +bool gma_pipe_has_type(struct drm_crtc *crtc, int type) +{ + struct drm_device *dev = crtc->dev; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + if (connector->encoder && connector->encoder->crtc == crtc) { + struct gma_encoder *gma_encoder = + gma_attached_encoder(connector); + if (gma_encoder->type == type) { + drm_connector_list_iter_end(&conn_iter); + return true; + } + } + } + drm_connector_list_iter_end(&conn_iter); + + return false; +} + +void gma_wait_for_vblank(struct drm_device *dev) +{ + /* Wait for 20ms, i.e. one cycle at 50hz. */ + mdelay(20); +} + +int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct drm_framebuffer *fb = crtc->primary->fb; + struct psb_gem_object *pobj; + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + unsigned long start, offset; + u32 dspcntr; + int ret = 0; + + if (!gma_power_begin(dev, true)) + return 0; + + /* no fb bound */ + if (!fb) { + dev_err(dev->dev, "No FB bound\n"); + goto gma_pipe_cleaner; + } + + pobj = to_psb_gem_object(fb->obj[0]); + + /* We are displaying this buffer, make sure it is actually loaded + into the GTT */ + ret = psb_gem_pin(pobj); + if (ret < 0) + goto gma_pipe_set_base_exit; + start = pobj->offset; + offset = y * fb->pitches[0] + x * fb->format->cpp[0]; + + REG_WRITE(map->stride, fb->pitches[0]); + + dspcntr = REG_READ(map->cntr); + dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; + + switch (fb->format->cpp[0] * 8) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (fb->format->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + dev_err(dev->dev, "Unknown color depth\n"); + ret = -EINVAL; + goto gma_pipe_set_base_exit; + } + REG_WRITE(map->cntr, dspcntr); + + dev_dbg(dev->dev, + "Writing base %08lX %08lX %d %d\n", start, offset, x, y); + + /* FIXME: Investigate whether this really is the base for psb and why + the linear offset is named base for the other chips. map->surf + should be the base and map->linoff the offset for all chips */ + if (IS_PSB(dev)) { + REG_WRITE(map->base, offset + start); + REG_READ(map->base); + } else { + REG_WRITE(map->base, offset); + REG_READ(map->base); + REG_WRITE(map->surf, start); + REG_READ(map->surf); + } + +gma_pipe_cleaner: + /* If there was a previous display we can now unpin it */ + if (old_fb) + psb_gem_unpin(to_psb_gem_object(old_fb->obj[0])); + +gma_pipe_set_base_exit: + gma_power_end(dev); + return ret; +} + +/* Loads the palette/gamma unit for the CRTC with the prepared values */ +void gma_crtc_load_lut(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; + int palreg = map->palette; + u16 *r, *g, *b; + int i; + + /* The clocks have to be on to load the palette. */ + if (!crtc->enabled) + return; + + r = crtc->gamma_store; + g = r + crtc->gamma_size; + b = g + crtc->gamma_size; + + if (gma_power_begin(dev, false)) { + for (i = 0; i < 256; i++) { + REG_WRITE(palreg + 4 * i, + (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | + (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | + ((*b++ >> 8) + gma_crtc->lut_adj[i])); + } + gma_power_end(dev); + } else { + for (i = 0; i < 256; i++) { + /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */ + dev_priv->regs.pipe[0].palette[i] = + (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) | + (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) | + ((*b++ >> 8) + gma_crtc->lut_adj[i]); + } + + } +} + +static int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, u32 size, + struct drm_modeset_acquire_ctx *ctx) +{ + gma_crtc_load_lut(crtc); + + return 0; +} + +/* + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +void gma_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + u32 temp; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + + if (IS_CDV(dev)) + dev_priv->ops->disable_sr(dev); + + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + if (gma_crtc->active) + break; + + gma_crtc->active = true; + + /* Enable the DPLL */ + temp = REG_READ(map->dpll); + if ((temp & DPLL_VCO_ENABLE) == 0) { + REG_WRITE(map->dpll, temp); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Enable the plane */ + temp = REG_READ(map->cntr); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE(map->cntr, + temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(map->base, REG_READ(map->base)); + } + + udelay(150); + + /* Enable the pipe */ + temp = REG_READ(map->conf); + if ((temp & PIPEACONF_ENABLE) == 0) + REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); + + temp = REG_READ(map->status); + temp &= ~(0xFFFF); + temp |= PIPE_FIFO_UNDERRUN; + REG_WRITE(map->status, temp); + REG_READ(map->status); + + gma_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable + * if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, true); TODO */ + + drm_crtc_vblank_on(crtc); + break; + case DRM_MODE_DPMS_OFF: + if (!gma_crtc->active) + break; + + gma_crtc->active = false; + + /* Give the overlay scaler a chance to disable + * if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Turn off vblank interrupts */ + drm_crtc_vblank_off(crtc); + + /* Wait for vblank for the disable to take effect */ + gma_wait_for_vblank(dev); + + /* Disable plane */ + temp = REG_READ(map->cntr); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE(map->cntr, + temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(map->base, REG_READ(map->base)); + REG_READ(map->base); + } + + /* Disable pipe */ + temp = REG_READ(map->conf); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); + REG_READ(map->conf); + } + + /* Wait for vblank for the disable to take effect. */ + gma_wait_for_vblank(dev); + + udelay(150); + + /* Disable DPLL */ + temp = REG_READ(map->dpll); + if ((temp & DPLL_VCO_ENABLE) != 0) { + REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); + REG_READ(map->dpll); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + + if (IS_CDV(dev)) + dev_priv->ops->update_wm(dev, crtc); + + /* Set FIFO watermarks */ + REG_WRITE(DSPARB, 0x3F3E); +} + +static int gma_crtc_cursor_set(struct drm_crtc *crtc, + struct drm_file *file_priv, uint32_t handle, + uint32_t width, uint32_t height) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; + uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; + uint32_t temp; + size_t addr = 0; + struct psb_gem_object *pobj; + struct psb_gem_object *cursor_pobj = gma_crtc->cursor_pobj; + struct drm_gem_object *obj; + void *tmp_dst; + int ret = 0, i, cursor_pages; + + /* If we didn't get a handle then turn the cursor off */ + if (!handle) { + temp = CURSOR_MODE_DISABLE; + if (gma_power_begin(dev, false)) { + REG_WRITE(control, temp); + REG_WRITE(base, 0); + gma_power_end(dev); + } + + /* Unpin the old GEM object */ + if (gma_crtc->cursor_obj) { + pobj = to_psb_gem_object(gma_crtc->cursor_obj); + psb_gem_unpin(pobj); + drm_gem_object_put(gma_crtc->cursor_obj); + gma_crtc->cursor_obj = NULL; + } + return 0; + } + + /* Currently we only support 64x64 cursors */ + if (width != 64 || height != 64) { + dev_dbg(dev->dev, "We currently only support 64x64 cursors\n"); + return -EINVAL; + } + + obj = drm_gem_object_lookup(file_priv, handle); + if (!obj) { + ret = -ENOENT; + goto unlock; + } + + if (obj->size < width * height * 4) { + dev_dbg(dev->dev, "Buffer is too small\n"); + ret = -ENOMEM; + goto unref_cursor; + } + + pobj = to_psb_gem_object(obj); + + /* Pin the memory into the GTT */ + ret = psb_gem_pin(pobj); + if (ret) { + dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); + goto unref_cursor; + } + + if (dev_priv->ops->cursor_needs_phys) { + if (!cursor_pobj) { + dev_err(dev->dev, "No hardware cursor mem available"); + ret = -ENOMEM; + goto unref_cursor; + } + + cursor_pages = obj->size / PAGE_SIZE; + if (cursor_pages > 4) + cursor_pages = 4; /* Prevent overflow */ + + /* Copy the cursor to cursor mem */ + tmp_dst = dev_priv->vram_addr + cursor_pobj->offset; + for (i = 0; i < cursor_pages; i++) { + memcpy_from_page(tmp_dst, pobj->pages[i], 0, PAGE_SIZE); + tmp_dst += PAGE_SIZE; + } + + addr = gma_crtc->cursor_addr; + } else { + addr = pobj->offset; + gma_crtc->cursor_addr = addr; + } + + temp = 0; + /* set the pipe for the cursor */ + temp |= (pipe << 28); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + + if (gma_power_begin(dev, false)) { + REG_WRITE(control, temp); + REG_WRITE(base, addr); + gma_power_end(dev); + } + + /* unpin the old bo */ + if (gma_crtc->cursor_obj) { + pobj = to_psb_gem_object(gma_crtc->cursor_obj); + psb_gem_unpin(pobj); + drm_gem_object_put(gma_crtc->cursor_obj); + } + + gma_crtc->cursor_obj = obj; +unlock: + return ret; + +unref_cursor: + drm_gem_object_put(obj); + return ret; +} + +static int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + uint32_t temp = 0; + uint32_t addr; + + if (x < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); + x = -x; + } + if (y < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); + y = -y; + } + + temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); + temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); + + addr = gma_crtc->cursor_addr; + + if (gma_power_begin(dev, false)) { + REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); + REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); + gma_power_end(dev); + } + return 0; +} + +void gma_crtc_prepare(struct drm_crtc *crtc) +{ + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); +} + +void gma_crtc_commit(struct drm_crtc *crtc) +{ + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); +} + +void gma_crtc_disable(struct drm_crtc *crtc) +{ + struct psb_gem_object *pobj; + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + + if (crtc->primary->fb) { + pobj = to_psb_gem_object(crtc->primary->fb->obj[0]); + psb_gem_unpin(pobj); + } +} + +void gma_crtc_destroy(struct drm_crtc *crtc) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + + if (gma_crtc->cursor_pobj) + drm_gem_object_put(&gma_crtc->cursor_pobj->base); + + kfree(gma_crtc->crtc_state); + drm_crtc_cleanup(crtc); + kfree(gma_crtc); +} + +int gma_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t page_flip_flags, + struct drm_modeset_acquire_ctx *ctx) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct drm_framebuffer *current_fb = crtc->primary->fb; + struct drm_framebuffer *old_fb = crtc->primary->old_fb; + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + struct drm_device *dev = crtc->dev; + unsigned long flags; + int ret; + + if (!crtc_funcs->mode_set_base) + return -EINVAL; + + /* Using mode_set_base requires the new fb to be set already. */ + crtc->primary->fb = fb; + + if (event) { + spin_lock_irqsave(&dev->event_lock, flags); + + WARN_ON(drm_crtc_vblank_get(crtc) != 0); + + gma_crtc->page_flip_event = event; + spin_unlock_irqrestore(&dev->event_lock, flags); + + /* Call this locked if we want an event at vblank interrupt. */ + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); + if (ret) { + spin_lock_irqsave(&dev->event_lock, flags); + if (gma_crtc->page_flip_event) { + gma_crtc->page_flip_event = NULL; + drm_crtc_vblank_put(crtc); + } + spin_unlock_irqrestore(&dev->event_lock, flags); + } + } else { + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); + } + + /* Restore previous fb in case of failure. */ + if (ret) + crtc->primary->fb = current_fb; + + return ret; +} + +const struct drm_crtc_funcs gma_crtc_funcs = { + .cursor_set = gma_crtc_cursor_set, + .cursor_move = gma_crtc_cursor_move, + .gamma_set = gma_crtc_gamma_set, + .set_config = drm_crtc_helper_set_config, + .destroy = gma_crtc_destroy, + .page_flip = gma_crtc_page_flip, + .enable_vblank = gma_crtc_enable_vblank, + .disable_vblank = gma_crtc_disable_vblank, + .get_vblank_counter = gma_crtc_get_vblank_counter, +}; + +/* + * Save HW states of given crtc + */ +void gma_crtc_save(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; + const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; + uint32_t palette_reg; + int i; + + if (!crtc_state) { + dev_err(dev->dev, "No CRTC state found\n"); + return; + } + + crtc_state->saveDSPCNTR = REG_READ(map->cntr); + crtc_state->savePIPECONF = REG_READ(map->conf); + crtc_state->savePIPESRC = REG_READ(map->src); + crtc_state->saveFP0 = REG_READ(map->fp0); + crtc_state->saveFP1 = REG_READ(map->fp1); + crtc_state->saveDPLL = REG_READ(map->dpll); + crtc_state->saveHTOTAL = REG_READ(map->htotal); + crtc_state->saveHBLANK = REG_READ(map->hblank); + crtc_state->saveHSYNC = REG_READ(map->hsync); + crtc_state->saveVTOTAL = REG_READ(map->vtotal); + crtc_state->saveVBLANK = REG_READ(map->vblank); + crtc_state->saveVSYNC = REG_READ(map->vsync); + crtc_state->saveDSPSTRIDE = REG_READ(map->stride); + + /* NOTE: DSPSIZE DSPPOS only for psb */ + crtc_state->saveDSPSIZE = REG_READ(map->size); + crtc_state->saveDSPPOS = REG_READ(map->pos); + + crtc_state->saveDSPBASE = REG_READ(map->base); + + palette_reg = map->palette; + for (i = 0; i < 256; ++i) + crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2)); +} + +/* + * Restore HW states of given crtc + */ +void gma_crtc_restore(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; + const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; + uint32_t palette_reg; + int i; + + if (!crtc_state) { + dev_err(dev->dev, "No crtc state\n"); + return; + } + + if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { + REG_WRITE(map->dpll, + crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); + REG_READ(map->dpll); + udelay(150); + } + + REG_WRITE(map->fp0, crtc_state->saveFP0); + REG_READ(map->fp0); + + REG_WRITE(map->fp1, crtc_state->saveFP1); + REG_READ(map->fp1); + + REG_WRITE(map->dpll, crtc_state->saveDPLL); + REG_READ(map->dpll); + udelay(150); + + REG_WRITE(map->htotal, crtc_state->saveHTOTAL); + REG_WRITE(map->hblank, crtc_state->saveHBLANK); + REG_WRITE(map->hsync, crtc_state->saveHSYNC); + REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); + REG_WRITE(map->vblank, crtc_state->saveVBLANK); + REG_WRITE(map->vsync, crtc_state->saveVSYNC); + REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); + + REG_WRITE(map->size, crtc_state->saveDSPSIZE); + REG_WRITE(map->pos, crtc_state->saveDSPPOS); + + REG_WRITE(map->src, crtc_state->savePIPESRC); + REG_WRITE(map->base, crtc_state->saveDSPBASE); + REG_WRITE(map->conf, crtc_state->savePIPECONF); + + gma_wait_for_vblank(dev); + + REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); + REG_WRITE(map->base, crtc_state->saveDSPBASE); + + gma_wait_for_vblank(dev); + + palette_reg = map->palette; + for (i = 0; i < 256; ++i) + REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]); +} + +void gma_encoder_prepare(struct drm_encoder *encoder) +{ + const struct drm_encoder_helper_funcs *encoder_funcs = + encoder->helper_private; + /* lvds has its own version of prepare see psb_intel_lvds_prepare */ + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); +} + +void gma_encoder_commit(struct drm_encoder *encoder) +{ + const struct drm_encoder_helper_funcs *encoder_funcs = + encoder->helper_private; + /* lvds has its own version of commit see psb_intel_lvds_commit */ + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); +} + +void gma_encoder_destroy(struct drm_encoder *encoder) +{ + struct gma_encoder *intel_encoder = to_gma_encoder(encoder); + + drm_encoder_cleanup(encoder); + kfree(intel_encoder); +} + +/* Currently there is only a 1:1 mapping of encoders and connectors */ +struct drm_encoder *gma_best_encoder(struct drm_connector *connector) +{ + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + + return &gma_encoder->base; +} + +void gma_connector_attach_encoder(struct gma_connector *connector, + struct gma_encoder *encoder) +{ + connector->encoder = encoder; + drm_connector_attach_encoder(&connector->base, + &encoder->base); +} + +#define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; } + +bool gma_pll_is_valid(struct drm_crtc *crtc, + const struct gma_limit_t *limit, + struct gma_clock_t *clock) +{ + if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) + GMA_PLL_INVALID("p1 out of range"); + if (clock->p < limit->p.min || limit->p.max < clock->p) + GMA_PLL_INVALID("p out of range"); + if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) + GMA_PLL_INVALID("m2 out of range"); + if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) + GMA_PLL_INVALID("m1 out of range"); + /* On CDV m1 is always 0 */ + if (clock->m1 <= clock->m2 && clock->m1 != 0) + GMA_PLL_INVALID("m1 <= m2 && m1 != 0"); + if (clock->m < limit->m.min || limit->m.max < clock->m) + GMA_PLL_INVALID("m out of range"); + if (clock->n < limit->n.min || limit->n.max < clock->n) + GMA_PLL_INVALID("n out of range"); + if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) + GMA_PLL_INVALID("vco out of range"); + /* XXX: We may need to be checking "Dot clock" + * depending on the multiplier, connector, etc., + * rather than just a single range. + */ + if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) + GMA_PLL_INVALID("dot out of range"); + + return true; +} + +bool gma_find_best_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, int refclk, + struct gma_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + const struct gma_clock_funcs *clock_funcs = + to_gma_crtc(crtc)->clock_funcs; + struct gma_clock_t clock; + int err = target; + + if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { + /* + * For LVDS, if the panel is on, just rely on its current + * settings for dual-channel. We haven't figured out how to + * reliably set up different single/dual channel state, if we + * even can. + */ + if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + LVDS_CLKB_POWER_UP) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset(best_clock, 0, sizeof(*best_clock)); + + /* m1 is always 0 on CDV so the outmost loop will run just once */ + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { + for (clock.m2 = limit->m2.min; + (clock.m2 < clock.m1 || clock.m1 == 0) && + clock.m2 <= limit->m2.max; clock.m2++) { + for (clock.n = limit->n.min; + clock.n <= limit->n.max; clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; + clock.p1++) { + int this_err; + + clock_funcs->clock(refclk, &clock); + + if (!clock_funcs->pll_is_valid(crtc, + limit, &clock)) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + + return err != target; +} diff --git a/drivers/gpu/drm/gma500/gma_display.h b/drivers/gpu/drm/gma500/gma_display.h new file mode 100644 index 000000000..c8b611a2f --- /dev/null +++ b/drivers/gpu/drm/gma500/gma_display.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright © 2006-2011 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Patrik Jakobsson <patrik.r.jakobsson@gmail.com> + */ + +#ifndef _GMA_DISPLAY_H_ +#define _GMA_DISPLAY_H_ + +#include <linux/pm_runtime.h> +#include <drm/drm_vblank.h> + +struct drm_encoder; +struct drm_mode_set; + +struct gma_clock_t { + /* given values */ + int n; + int m1, m2; + int p1, p2; + /* derived values */ + int dot; + int vco; + int m; + int p; +}; + +struct gma_range_t { + int min, max; +}; + +struct gma_p2_t { + int dot_limit; + int p2_slow, p2_fast; +}; + +struct gma_limit_t { + struct gma_range_t dot, vco, n, m, m1, m2, p, p1; + struct gma_p2_t p2; + bool (*find_pll)(const struct gma_limit_t *, struct drm_crtc *, + int target, int refclk, + struct gma_clock_t *best_clock); +}; + +struct gma_clock_funcs { + void (*clock)(int refclk, struct gma_clock_t *clock); + const struct gma_limit_t *(*limit)(struct drm_crtc *crtc, int refclk); + bool (*pll_is_valid)(struct drm_crtc *crtc, + const struct gma_limit_t *limit, + struct gma_clock_t *clock); +}; + +/* Common pipe related functions */ +extern bool gma_pipe_has_type(struct drm_crtc *crtc, int type); +extern void gma_wait_for_vblank(struct drm_device *dev); +extern int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb); +extern void gma_crtc_load_lut(struct drm_crtc *crtc); +extern void gma_crtc_dpms(struct drm_crtc *crtc, int mode); +extern void gma_crtc_prepare(struct drm_crtc *crtc); +extern void gma_crtc_commit(struct drm_crtc *crtc); +extern void gma_crtc_disable(struct drm_crtc *crtc); +extern void gma_crtc_destroy(struct drm_crtc *crtc); +extern int gma_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t page_flip_flags, + struct drm_modeset_acquire_ctx *ctx); + +extern void gma_crtc_save(struct drm_crtc *crtc); +extern void gma_crtc_restore(struct drm_crtc *crtc); + +extern const struct drm_crtc_funcs gma_crtc_funcs; + +extern void gma_encoder_prepare(struct drm_encoder *encoder); +extern void gma_encoder_commit(struct drm_encoder *encoder); +extern void gma_encoder_destroy(struct drm_encoder *encoder); + +/* Common clock related functions */ +extern const struct gma_limit_t *gma_limit(struct drm_crtc *crtc, int refclk); +extern void gma_clock(int refclk, struct gma_clock_t *clock); +extern bool gma_pll_is_valid(struct drm_crtc *crtc, + const struct gma_limit_t *limit, + struct gma_clock_t *clock); +extern bool gma_find_best_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, int refclk, + struct gma_clock_t *best_clock); +#endif diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c new file mode 100644 index 000000000..379bc218a --- /dev/null +++ b/drivers/gpu/drm/gma500/gtt.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2007, Intel Corporation. + * All Rights Reserved. + * + * Authors: Thomas Hellstrom <thomas-at-tungstengraphics.com> + * Alan Cox <alan@linux.intel.com> + */ + +#include "gem.h" /* TODO: for struct psb_gem_object, see psb_gtt_restore() */ +#include "psb_drv.h" + + +/* + * GTT resource allocator - manage page mappings in GTT space + */ + +int psb_gtt_allocate_resource(struct drm_psb_private *pdev, struct resource *res, + const char *name, resource_size_t size, resource_size_t align, + bool stolen, u32 *offset) +{ + struct resource *root = pdev->gtt_mem; + resource_size_t start, end; + int ret; + + if (stolen) { + /* The start of the GTT is backed by stolen pages. */ + start = root->start; + end = root->start + pdev->gtt.stolen_size - 1; + } else { + /* The rest is backed by system pages. */ + start = root->start + pdev->gtt.stolen_size; + end = root->end; + } + + res->name = name; + ret = allocate_resource(root, res, size, start, end, align, NULL, NULL); + if (ret) + return ret; + *offset = res->start - root->start; + + return 0; +} + +/** + * psb_gtt_mask_pte - generate GTT pte entry + * @pfn: page number to encode + * @type: type of memory in the GTT + * + * Set the GTT entry for the appropriate memory type. + */ +uint32_t psb_gtt_mask_pte(uint32_t pfn, int type) +{ + uint32_t mask = PSB_PTE_VALID; + + /* Ensure we explode rather than put an invalid low mapping of + a high mapping page into the gtt */ + BUG_ON(pfn & ~(0xFFFFFFFF >> PAGE_SHIFT)); + + if (type & PSB_MMU_CACHED_MEMORY) + mask |= PSB_PTE_CACHED; + if (type & PSB_MMU_RO_MEMORY) + mask |= PSB_PTE_RO; + if (type & PSB_MMU_WO_MEMORY) + mask |= PSB_PTE_WO; + + return (pfn << PAGE_SHIFT) | mask; +} + +static u32 __iomem *psb_gtt_entry(struct drm_psb_private *pdev, const struct resource *res) +{ + unsigned long offset = res->start - pdev->gtt_mem->start; + + return pdev->gtt_map + (offset >> PAGE_SHIFT); +} + +/* Acquires GTT mutex internally. */ +void psb_gtt_insert_pages(struct drm_psb_private *pdev, const struct resource *res, + struct page **pages) +{ + resource_size_t npages, i; + u32 __iomem *gtt_slot; + u32 pte; + + mutex_lock(&pdev->gtt_mutex); + + /* Write our page entries into the GTT itself */ + + npages = resource_size(res) >> PAGE_SHIFT; + gtt_slot = psb_gtt_entry(pdev, res); + + for (i = 0; i < npages; ++i, ++gtt_slot) { + pte = psb_gtt_mask_pte(page_to_pfn(pages[i]), PSB_MMU_CACHED_MEMORY); + iowrite32(pte, gtt_slot); + } + + /* Make sure all the entries are set before we return */ + ioread32(gtt_slot - 1); + + mutex_unlock(&pdev->gtt_mutex); +} + +/* Acquires GTT mutex internally. */ +void psb_gtt_remove_pages(struct drm_psb_private *pdev, const struct resource *res) +{ + resource_size_t npages, i; + u32 __iomem *gtt_slot; + u32 pte; + + mutex_lock(&pdev->gtt_mutex); + + /* Install scratch page for the resource */ + + pte = psb_gtt_mask_pte(page_to_pfn(pdev->scratch_page), PSB_MMU_CACHED_MEMORY); + + npages = resource_size(res) >> PAGE_SHIFT; + gtt_slot = psb_gtt_entry(pdev, res); + + for (i = 0; i < npages; ++i, ++gtt_slot) + iowrite32(pte, gtt_slot); + + /* Make sure all the entries are set before we return */ + ioread32(gtt_slot - 1); + + mutex_unlock(&pdev->gtt_mutex); +} + +static int psb_gtt_enable(struct drm_psb_private *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + int ret; + + ret = pci_read_config_word(pdev, PSB_GMCH_CTRL, &dev_priv->gmch_ctrl); + if (ret) + return pcibios_err_to_errno(ret); + ret = pci_write_config_word(pdev, PSB_GMCH_CTRL, dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED); + if (ret) + return pcibios_err_to_errno(ret); + + dev_priv->pge_ctl = PSB_RVDC32(PSB_PGETBL_CTL); + PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL); + + (void)PSB_RVDC32(PSB_PGETBL_CTL); + + return 0; +} + +static void psb_gtt_disable(struct drm_psb_private *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + + pci_write_config_word(pdev, PSB_GMCH_CTRL, dev_priv->gmch_ctrl); + PSB_WVDC32(dev_priv->pge_ctl, PSB_PGETBL_CTL); + + (void)PSB_RVDC32(PSB_PGETBL_CTL); +} + +void psb_gtt_fini(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + iounmap(dev_priv->gtt_map); + psb_gtt_disable(dev_priv); + mutex_destroy(&dev_priv->gtt_mutex); +} + +/* Clear GTT. Use a scratch page to avoid accidents or scribbles. */ +static void psb_gtt_clear(struct drm_psb_private *pdev) +{ + resource_size_t pfn_base; + unsigned long i; + uint32_t pte; + + pfn_base = page_to_pfn(pdev->scratch_page); + pte = psb_gtt_mask_pte(pfn_base, PSB_MMU_CACHED_MEMORY); + + for (i = 0; i < pdev->gtt.gtt_pages; ++i) + iowrite32(pte, pdev->gtt_map + i); + + (void)ioread32(pdev->gtt_map + i - 1); +} + +static void psb_gtt_init_ranges(struct drm_psb_private *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct psb_gtt *pg = &dev_priv->gtt; + resource_size_t gtt_phys_start, mmu_gatt_start, gtt_start, gtt_pages, + gatt_start, gatt_pages; + struct resource *gtt_mem; + + /* The root resource we allocate address space from */ + gtt_phys_start = dev_priv->pge_ctl & PAGE_MASK; + + /* + * The video MMU has a HW bug when accessing 0x0d0000000. Make + * GATT start at 0x0e0000000. This doesn't actually matter for + * us now, but maybe will if the video acceleration ever gets + * opened up. + */ + mmu_gatt_start = 0xe0000000; + + gtt_start = pci_resource_start(pdev, PSB_GTT_RESOURCE); + gtt_pages = pci_resource_len(pdev, PSB_GTT_RESOURCE) >> PAGE_SHIFT; + + /* CDV doesn't report this. In which case the system has 64 gtt pages */ + if (!gtt_start || !gtt_pages) { + dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n"); + gtt_pages = 64; + gtt_start = dev_priv->pge_ctl; + } + + gatt_start = pci_resource_start(pdev, PSB_GATT_RESOURCE); + gatt_pages = pci_resource_len(pdev, PSB_GATT_RESOURCE) >> PAGE_SHIFT; + + if (!gatt_pages || !gatt_start) { + static struct resource fudge; /* Preferably peppermint */ + + /* + * This can occur on CDV systems. Fudge it in this case. We + * really don't care what imaginary space is being allocated + * at this point. + */ + dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n"); + gatt_start = 0x40000000; + gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT; + + /* + * This is a little confusing but in fact the GTT is providing + * a view from the GPU into memory and not vice versa. As such + * this is really allocating space that is not the same as the + * CPU address space on CDV. + */ + fudge.start = 0x40000000; + fudge.end = 0x40000000 + 128 * 1024 * 1024 - 1; + fudge.name = "fudge"; + fudge.flags = IORESOURCE_MEM; + + gtt_mem = &fudge; + } else { + gtt_mem = &pdev->resource[PSB_GATT_RESOURCE]; + } + + pg->gtt_phys_start = gtt_phys_start; + pg->mmu_gatt_start = mmu_gatt_start; + pg->gtt_start = gtt_start; + pg->gtt_pages = gtt_pages; + pg->gatt_start = gatt_start; + pg->gatt_pages = gatt_pages; + dev_priv->gtt_mem = gtt_mem; +} + +int psb_gtt_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_gtt *pg = &dev_priv->gtt; + int ret; + + mutex_init(&dev_priv->gtt_mutex); + + ret = psb_gtt_enable(dev_priv); + if (ret) + goto err_mutex_destroy; + + psb_gtt_init_ranges(dev_priv); + + dev_priv->gtt_map = ioremap(pg->gtt_phys_start, pg->gtt_pages << PAGE_SHIFT); + if (!dev_priv->gtt_map) { + dev_err(dev->dev, "Failure to map gtt.\n"); + ret = -ENOMEM; + goto err_psb_gtt_disable; + } + + psb_gtt_clear(dev_priv); + + return 0; + +err_psb_gtt_disable: + psb_gtt_disable(dev_priv); +err_mutex_destroy: + mutex_destroy(&dev_priv->gtt_mutex); + return ret; +} + +int psb_gtt_resume(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_gtt *pg = &dev_priv->gtt; + unsigned int old_gtt_pages = pg->gtt_pages; + int ret; + + /* Enable the GTT */ + ret = psb_gtt_enable(dev_priv); + if (ret) + return ret; + + psb_gtt_init_ranges(dev_priv); + + if (old_gtt_pages != pg->gtt_pages) { + dev_err(dev->dev, "GTT resume error.\n"); + ret = -ENODEV; + goto err_psb_gtt_disable; + } + + psb_gtt_clear(dev_priv); + +err_psb_gtt_disable: + psb_gtt_disable(dev_priv); + return ret; +} diff --git a/drivers/gpu/drm/gma500/gtt.h b/drivers/gpu/drm/gma500/gtt.h new file mode 100644 index 000000000..d5a5fd446 --- /dev/null +++ b/drivers/gpu/drm/gma500/gtt.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2007-2008, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#ifndef _PSB_GTT_H_ +#define _PSB_GTT_H_ + +#include <drm/drm_gem.h> + +struct drm_psb_private; + +/* This wants cleaning up with respect to the psb_dev and un-needed stuff */ +struct psb_gtt { + uint32_t gatt_start; + uint32_t mmu_gatt_start; + uint32_t gtt_start; + uint32_t gtt_phys_start; + unsigned gtt_pages; + unsigned gatt_pages; + unsigned long stolen_size; + unsigned long vram_stolen_size; +}; + +/* Exported functions */ +int psb_gtt_init(struct drm_device *dev); +void psb_gtt_fini(struct drm_device *dev); +int psb_gtt_resume(struct drm_device *dev); + +int psb_gtt_allocate_resource(struct drm_psb_private *pdev, struct resource *res, + const char *name, resource_size_t size, resource_size_t align, + bool stolen, u32 *offset); + +uint32_t psb_gtt_mask_pte(uint32_t pfn, int type); +void psb_gtt_insert_pages(struct drm_psb_private *pdev, const struct resource *res, + struct page **pages); +void psb_gtt_remove_pages(struct drm_psb_private *pdev, const struct resource *res); + +#endif diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c new file mode 100644 index 000000000..8245b5603 --- /dev/null +++ b/drivers/gpu/drm/gma500/intel_bios.c @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2006 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <drm/display/drm_dp_helper.h> +#include <drm/drm.h> + +#include "intel_bios.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +#define SLAVE_ADDR1 0x70 +#define SLAVE_ADDR2 0x72 + +static void *find_section(struct bdb_header *bdb, int section_id) +{ + u8 *base = (u8 *)bdb; + int index = 0; + u16 total, current_size; + u8 current_id; + + /* skip to first section */ + index += bdb->header_size; + total = bdb->bdb_size; + + /* walk the sections looking for section_id */ + while (index < total) { + current_id = *(base + index); + index++; + current_size = *((u16 *)(base + index)); + index += 2; + if (current_id == section_id) + return base + index; + index += current_size; + } + + return NULL; +} + +static void +parse_edp(struct drm_psb_private *dev_priv, struct bdb_header *bdb) +{ + struct bdb_edp *edp; + struct edp_power_seq *edp_pps; + struct edp_link_params *edp_link_params; + uint8_t panel_type; + + edp = find_section(bdb, BDB_EDP); + + dev_priv->edp.bpp = 18; + if (!edp) { + if (dev_priv->edp.support) { + DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported, assume %dbpp panel color depth.\n", + dev_priv->edp.bpp); + } + return; + } + + panel_type = dev_priv->panel_type; + switch ((edp->color_depth >> (panel_type * 2)) & 3) { + case EDP_18BPP: + dev_priv->edp.bpp = 18; + break; + case EDP_24BPP: + dev_priv->edp.bpp = 24; + break; + case EDP_30BPP: + dev_priv->edp.bpp = 30; + break; + } + + /* Get the eDP sequencing and link info */ + edp_pps = &edp->power_seqs[panel_type]; + edp_link_params = &edp->link_params[panel_type]; + + dev_priv->edp.pps = *edp_pps; + + DRM_DEBUG_KMS("EDP timing in vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", + dev_priv->edp.pps.t1_t3, dev_priv->edp.pps.t8, + dev_priv->edp.pps.t9, dev_priv->edp.pps.t10, + dev_priv->edp.pps.t11_t12); + + dev_priv->edp.rate = edp_link_params->rate ? DP_LINK_BW_2_7 : + DP_LINK_BW_1_62; + switch (edp_link_params->lanes) { + case 0: + dev_priv->edp.lanes = 1; + break; + case 1: + dev_priv->edp.lanes = 2; + break; + case 3: + default: + dev_priv->edp.lanes = 4; + break; + } + DRM_DEBUG_KMS("VBT reports EDP: Lane_count %d, Lane_rate %d, Bpp %d\n", + dev_priv->edp.lanes, dev_priv->edp.rate, dev_priv->edp.bpp); + + switch (edp_link_params->preemphasis) { + case 0: + dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0; + break; + case 1: + dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1; + break; + case 2: + dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2; + break; + case 3: + dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3; + break; + } + switch (edp_link_params->vswing) { + case 0: + dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0; + break; + case 1: + dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1; + break; + case 2: + dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2; + break; + case 3: + dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3; + break; + } + DRM_DEBUG_KMS("VBT reports EDP: VSwing %d, Preemph %d\n", + dev_priv->edp.vswing, dev_priv->edp.preemphasis); +} + +static u16 +get_blocksize(void *p) +{ + u16 *block_ptr, block_size; + + block_ptr = (u16 *)((char *)p - 2); + block_size = *block_ptr; + return block_size; +} + +static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, + struct lvds_dvo_timing *dvo_timing) +{ + panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | + dvo_timing->hactive_lo; + panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); + panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + + dvo_timing->hsync_pulse_width; + panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + + panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | + dvo_timing->vactive_lo; + panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + + dvo_timing->vsync_off; + panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + + dvo_timing->vsync_pulse_width; + panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); + panel_fixed_mode->clock = dvo_timing->clock * 10; + panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + + if (dvo_timing->hsync_positive) + panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (dvo_timing->vsync_positive) + panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; + + /* Some VBTs have bogus h/vtotal values */ + if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) + panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; + if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) + panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + + drm_mode_set_name(panel_fixed_mode); +} + +static void parse_backlight_data(struct drm_psb_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_lvds_backlight *vbt_lvds_bl = NULL; + struct bdb_lvds_backlight *lvds_bl; + u8 p_type = 0; + void *bl_start = NULL; + struct bdb_lvds_options *lvds_opts + = find_section(bdb, BDB_LVDS_OPTIONS); + + dev_priv->lvds_bl = NULL; + + if (lvds_opts) + p_type = lvds_opts->panel_type; + else + return; + + bl_start = find_section(bdb, BDB_LVDS_BACKLIGHT); + vbt_lvds_bl = (struct bdb_lvds_backlight *)(bl_start + 1) + p_type; + + lvds_bl = kmemdup(vbt_lvds_bl, sizeof(*vbt_lvds_bl), GFP_KERNEL); + if (!lvds_bl) { + dev_err(dev_priv->dev.dev, "out of memory for backlight data\n"); + return; + } + dev_priv->lvds_bl = lvds_bl; +} + +/* Try to find integrated panel data */ +static void parse_lfp_panel_data(struct drm_psb_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_lvds_options *lvds_options; + struct bdb_lvds_lfp_data *lvds_lfp_data; + struct bdb_lvds_lfp_data_entry *entry; + struct lvds_dvo_timing *dvo_timing; + struct drm_display_mode *panel_fixed_mode; + + /* Defaults if we can't find VBT info */ + dev_priv->lvds_dither = 0; + dev_priv->lvds_vbt = 0; + + lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); + if (!lvds_options) + return; + + dev_priv->lvds_dither = lvds_options->pixel_dither; + dev_priv->panel_type = lvds_options->panel_type; + + if (lvds_options->panel_type == 0xff) + return; + + lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); + if (!lvds_lfp_data) + return; + + + entry = &lvds_lfp_data->data[lvds_options->panel_type]; + dvo_timing = &entry->dvo_timing; + + panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), + GFP_KERNEL); + if (panel_fixed_mode == NULL) { + dev_err(dev_priv->dev.dev, "out of memory for fixed panel mode\n"); + return; + } + + dev_priv->lvds_vbt = 1; + fill_detail_timing_data(panel_fixed_mode, dvo_timing); + + if (panel_fixed_mode->htotal > 0 && panel_fixed_mode->vtotal > 0) { + dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; + drm_mode_debug_printmodeline(panel_fixed_mode); + } else { + dev_dbg(dev_priv->dev.dev, "ignoring invalid LVDS VBT\n"); + dev_priv->lvds_vbt = 0; + kfree(panel_fixed_mode); + } + return; +} + +/* Try to find sdvo panel data */ +static void parse_sdvo_panel_data(struct drm_psb_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_sdvo_lvds_options *sdvo_lvds_options; + struct lvds_dvo_timing *dvo_timing; + struct drm_display_mode *panel_fixed_mode; + + dev_priv->sdvo_lvds_vbt_mode = NULL; + + sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); + if (!sdvo_lvds_options) + return; + + dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS); + if (!dvo_timing) + return; + + panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); + + if (!panel_fixed_mode) + return; + + fill_detail_timing_data(panel_fixed_mode, + dvo_timing + sdvo_lvds_options->panel_type); + + dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode; + + return; +} + +static void parse_general_features(struct drm_psb_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_general_features *general; + + /* Set sensible defaults in case we can't find the general block */ + dev_priv->int_tv_support = 1; + dev_priv->int_crt_support = 1; + + general = find_section(bdb, BDB_GENERAL_FEATURES); + if (general) { + dev_priv->int_tv_support = general->int_tv_support; + dev_priv->int_crt_support = general->int_crt_support; + dev_priv->lvds_use_ssc = general->enable_ssc; + + if (dev_priv->lvds_use_ssc) { + dev_priv->lvds_ssc_freq + = general->ssc_freq ? 100 : 96; + } + } +} + +static void +parse_sdvo_device_mapping(struct drm_psb_private *dev_priv, + struct bdb_header *bdb) +{ + struct sdvo_device_mapping *p_mapping; + struct bdb_general_definitions *p_defs; + struct child_device_config *p_child; + int i, child_device_num, count; + u16 block_size; + + p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); + if (!p_defs) { + DRM_DEBUG_KMS("No general definition block is found, unable to construct sdvo mapping.\n"); + return; + } + /* judge whether the size of child device meets the requirements. + * If the child device size obtained from general definition block + * is different with sizeof(struct child_device_config), skip the + * parsing of sdvo device info + */ + if (p_defs->child_dev_size != sizeof(*p_child)) { + /* different child dev size . Ignore it */ + DRM_DEBUG_KMS("different child size is found. Invalid.\n"); + return; + } + /* get the block size of general definitions */ + block_size = get_blocksize(p_defs); + /* get the number of child device */ + child_device_num = (block_size - sizeof(*p_defs)) / + sizeof(*p_child); + count = 0; + for (i = 0; i < child_device_num; i++) { + p_child = &(p_defs->devices[i]); + if (!p_child->device_type) { + /* skip the device block if device type is invalid */ + continue; + } + if (p_child->slave_addr != SLAVE_ADDR1 && + p_child->slave_addr != SLAVE_ADDR2) { + /* + * If the slave address is neither 0x70 nor 0x72, + * it is not a SDVO device. Skip it. + */ + continue; + } + if (p_child->dvo_port != DEVICE_PORT_DVOB && + p_child->dvo_port != DEVICE_PORT_DVOC) { + /* skip the incorrect SDVO port */ + DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n"); + continue; + } + DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on" + " %s port\n", + p_child->slave_addr, + (p_child->dvo_port == DEVICE_PORT_DVOB) ? + "SDVOB" : "SDVOC"); + p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]); + if (!p_mapping->initialized) { + p_mapping->dvo_port = p_child->dvo_port; + p_mapping->slave_addr = p_child->slave_addr; + p_mapping->dvo_wiring = p_child->dvo_wiring; + p_mapping->ddc_pin = p_child->ddc_pin; + p_mapping->i2c_pin = p_child->i2c_pin; + p_mapping->initialized = 1; + DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", + p_mapping->dvo_port, + p_mapping->slave_addr, + p_mapping->dvo_wiring, + p_mapping->ddc_pin, + p_mapping->i2c_pin); + } else { + DRM_DEBUG_KMS("Maybe one SDVO port is shared by " + "two SDVO device.\n"); + } + if (p_child->slave2_addr) { + /* Maybe this is a SDVO device with multiple inputs */ + /* And the mapping info is not added */ + DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this" + " is a SDVO device with multiple inputs.\n"); + } + count++; + } + + if (!count) { + /* No SDVO device info is found */ + DRM_DEBUG_KMS("No SDVO device info is found in VBT\n"); + } + return; +} + + +static void +parse_driver_features(struct drm_psb_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_driver_features *driver; + + driver = find_section(bdb, BDB_DRIVER_FEATURES); + if (!driver) + return; + + if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP) + dev_priv->edp.support = 1; + + dev_priv->lvds_enabled_in_vbt = driver->lvds_config != 0; + DRM_DEBUG_KMS("LVDS VBT config bits: 0x%x\n", driver->lvds_config); + + /* This bit means to use 96Mhz for DPLL_A or not */ + if (driver->primary_lfp_id) + dev_priv->dplla_96mhz = true; + else + dev_priv->dplla_96mhz = false; +} + +static void +parse_device_mapping(struct drm_psb_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_general_definitions *p_defs; + struct child_device_config *p_child, *child_dev_ptr; + int i, child_device_num, count; + u16 block_size; + + p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); + if (!p_defs) { + DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n"); + return; + } + /* judge whether the size of child device meets the requirements. + * If the child device size obtained from general definition block + * is different with sizeof(struct child_device_config), skip the + * parsing of sdvo device info + */ + if (p_defs->child_dev_size != sizeof(*p_child)) { + /* different child dev size . Ignore it */ + DRM_DEBUG_KMS("different child size is found. Invalid.\n"); + return; + } + /* get the block size of general definitions */ + block_size = get_blocksize(p_defs); + /* get the number of child device */ + child_device_num = (block_size - sizeof(*p_defs)) / + sizeof(*p_child); + count = 0; + /* get the number of child devices that are present */ + for (i = 0; i < child_device_num; i++) { + p_child = &(p_defs->devices[i]); + if (!p_child->device_type) { + /* skip the device block if device type is invalid */ + continue; + } + count++; + } + if (!count) { + DRM_DEBUG_KMS("no child dev is parsed from VBT\n"); + return; + } + dev_priv->child_dev = kcalloc(count, sizeof(*p_child), GFP_KERNEL); + if (!dev_priv->child_dev) { + DRM_DEBUG_KMS("No memory space for child devices\n"); + return; + } + + dev_priv->child_dev_num = count; + count = 0; + for (i = 0; i < child_device_num; i++) { + p_child = &(p_defs->devices[i]); + if (!p_child->device_type) { + /* skip the device block if device type is invalid */ + continue; + } + child_dev_ptr = dev_priv->child_dev + count; + count++; + memcpy((void *)child_dev_ptr, (void *)p_child, + sizeof(*p_child)); + } + return; +} + + +/** + * psb_intel_init_bios - initialize VBIOS settings & find VBT + * @dev: DRM device + * + * Loads the Video BIOS and checks that the VBT exists. Sets scratch registers + * to appropriate values. + * + * VBT existence is a sanity check that is relied on by other i830_bios.c code. + * Note that it would be better to use a BIOS call to get the VBT, as BIOSes may + * feed an updated VBT back through that, compared to what we'll fetch using + * this method of groping around in the BIOS data. + * + * Returns 0 on success, nonzero on failure. + */ +int psb_intel_init_bios(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct vbt_header *vbt = NULL; + struct bdb_header *bdb = NULL; + u8 __iomem *bios = NULL; + size_t size; + int i; + + + dev_priv->panel_type = 0xff; + + /* XXX Should this validation be moved to intel_opregion.c? */ + if (dev_priv->opregion.vbt) { + struct vbt_header *vbt = dev_priv->opregion.vbt; + if (memcmp(vbt->signature, "$VBT", 4) == 0) { + DRM_DEBUG_KMS("Using VBT from OpRegion: %20s\n", + vbt->signature); + bdb = (struct bdb_header *)((char *)vbt + vbt->bdb_offset); + } else + dev_priv->opregion.vbt = NULL; + } + + if (bdb == NULL) { + bios = pci_map_rom(pdev, &size); + if (!bios) + return -1; + + /* Scour memory looking for the VBT signature */ + for (i = 0; i + 4 < size; i++) { + if (!memcmp(bios + i, "$VBT", 4)) { + vbt = (struct vbt_header *)(bios + i); + break; + } + } + + if (!vbt) { + dev_err(dev->dev, "VBT signature missing\n"); + pci_unmap_rom(pdev, bios); + return -1; + } + bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset); + } + + /* Grab useful general dxefinitions */ + parse_general_features(dev_priv, bdb); + parse_driver_features(dev_priv, bdb); + parse_lfp_panel_data(dev_priv, bdb); + parse_sdvo_panel_data(dev_priv, bdb); + parse_sdvo_device_mapping(dev_priv, bdb); + parse_device_mapping(dev_priv, bdb); + parse_backlight_data(dev_priv, bdb); + parse_edp(dev_priv, bdb); + + if (bios) + pci_unmap_rom(pdev, bios); + + return 0; +} + +/* + * Destroy and free VBT data + */ +void psb_intel_destroy_bios(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + kfree(dev_priv->sdvo_lvds_vbt_mode); + kfree(dev_priv->lfp_lvds_vbt_mode); + kfree(dev_priv->lvds_bl); +} diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h new file mode 100644 index 000000000..0e6facf21 --- /dev/null +++ b/drivers/gpu/drm/gma500/intel_bios.h @@ -0,0 +1,607 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2006 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#ifndef _INTEL_BIOS_H_ +#define _INTEL_BIOS_H_ + +struct drm_device; + +struct vbt_header { + u8 signature[20]; /**< Always starts with 'VBT$' */ + u16 version; /**< decimal */ + u16 header_size; /**< in bytes */ + u16 vbt_size; /**< in bytes */ + u8 vbt_checksum; + u8 reserved0; + u32 bdb_offset; /**< from beginning of VBT */ + u32 aim_offset[4]; /**< from beginning of VBT */ +} __packed; + + +struct bdb_header { + u8 signature[16]; /**< Always 'BIOS_DATA_BLOCK' */ + u16 version; /**< decimal */ + u16 header_size; /**< in bytes */ + u16 bdb_size; /**< in bytes */ +}; + +/* strictly speaking, this is a "skip" block, but it has interesting info */ +struct vbios_data { + u8 type; /* 0 == desktop, 1 == mobile */ + u8 relstage; + u8 chipset; + u8 lvds_present:1; + u8 tv_present:1; + u8 rsvd2:6; /* finish byte */ + u8 rsvd3[4]; + u8 signon[155]; + u8 copyright[61]; + u16 code_segment; + u8 dos_boot_mode; + u8 bandwidth_percent; + u8 rsvd4; /* popup memory size */ + u8 resize_pci_bios; + u8 rsvd5; /* is crt already on ddc2 */ +} __packed; + +/* + * There are several types of BIOS data blocks (BDBs), each block has + * an ID and size in the first 3 bytes (ID in first, size in next 2). + * Known types are listed below. + */ +#define BDB_GENERAL_FEATURES 1 +#define BDB_GENERAL_DEFINITIONS 2 +#define BDB_OLD_TOGGLE_LIST 3 +#define BDB_MODE_SUPPORT_LIST 4 +#define BDB_GENERIC_MODE_TABLE 5 +#define BDB_EXT_MMIO_REGS 6 +#define BDB_SWF_IO 7 +#define BDB_SWF_MMIO 8 +#define BDB_DOT_CLOCK_TABLE 9 +#define BDB_MODE_REMOVAL_TABLE 10 +#define BDB_CHILD_DEVICE_TABLE 11 +#define BDB_DRIVER_FEATURES 12 +#define BDB_DRIVER_PERSISTENCE 13 +#define BDB_EXT_TABLE_PTRS 14 +#define BDB_DOT_CLOCK_OVERRIDE 15 +#define BDB_DISPLAY_SELECT 16 +/* 17 rsvd */ +#define BDB_DRIVER_ROTATION 18 +#define BDB_DISPLAY_REMOVE 19 +#define BDB_OEM_CUSTOM 20 +#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ +#define BDB_SDVO_LVDS_OPTIONS 22 +#define BDB_SDVO_PANEL_DTDS 23 +#define BDB_SDVO_LVDS_PNP_IDS 24 +#define BDB_SDVO_LVDS_POWER_SEQ 25 +#define BDB_TV_OPTIONS 26 +#define BDB_EDP 27 +#define BDB_LVDS_OPTIONS 40 +#define BDB_LVDS_LFP_DATA_PTRS 41 +#define BDB_LVDS_LFP_DATA 42 +#define BDB_LVDS_BACKLIGHT 43 +#define BDB_LVDS_POWER 44 +#define BDB_SKIP 254 /* VBIOS private block, ignore */ + +struct bdb_general_features { + /* bits 1 */ + u8 panel_fitting:2; + u8 flexaim:1; + u8 msg_enable:1; + u8 clear_screen:3; + u8 color_flip:1; + + /* bits 2 */ + u8 download_ext_vbt:1; + u8 enable_ssc:1; + u8 ssc_freq:1; + u8 enable_lfp_on_override:1; + u8 disable_ssc_ddt:1; + u8 rsvd8:3; /* finish byte */ + + /* bits 3 */ + u8 disable_smooth_vision:1; + u8 single_dvi:1; + u8 rsvd9:6; /* finish byte */ + + /* bits 4 */ + u8 legacy_monitor_detect; + + /* bits 5 */ + u8 int_crt_support:1; + u8 int_tv_support:1; + u8 int_efp_support:1; + u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */ + u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */ + u8 rsvd11:3; /* finish byte */ +} __packed; + +/* pre-915 */ +#define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */ +#define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */ +#define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */ +#define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */ + +/* Pre 915 */ +#define DEVICE_TYPE_NONE 0x00 +#define DEVICE_TYPE_CRT 0x01 +#define DEVICE_TYPE_TV 0x09 +#define DEVICE_TYPE_EFP 0x12 +#define DEVICE_TYPE_LFP 0x22 +/* On 915+ */ +#define DEVICE_TYPE_CRT_DPMS 0x6001 +#define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001 +#define DEVICE_TYPE_TV_COMPOSITE 0x0209 +#define DEVICE_TYPE_TV_MACROVISION 0x0289 +#define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c +#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609 +#define DEVICE_TYPE_TV_SCART 0x0209 +#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009 +#define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012 +#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052 +#define DEVICE_TYPE_EFP_DVI_I 0x6053 +#define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152 +#define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2 +#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062 +#define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162 +#define DEVICE_TYPE_LFP_PANELLINK 0x5012 +#define DEVICE_TYPE_LFP_CMOS_PWR 0x5042 +#define DEVICE_TYPE_LFP_LVDS_PWR 0x5062 +#define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162 +#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2 + +#define DEVICE_CFG_NONE 0x00 +#define DEVICE_CFG_12BIT_DVOB 0x01 +#define DEVICE_CFG_12BIT_DVOC 0x02 +#define DEVICE_CFG_24BIT_DVOBC 0x09 +#define DEVICE_CFG_24BIT_DVOCB 0x0a +#define DEVICE_CFG_DUAL_DVOB 0x11 +#define DEVICE_CFG_DUAL_DVOC 0x12 +#define DEVICE_CFG_DUAL_DVOBC 0x13 +#define DEVICE_CFG_DUAL_LINK_DVOBC 0x19 +#define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a + +#define DEVICE_WIRE_NONE 0x00 +#define DEVICE_WIRE_DVOB 0x01 +#define DEVICE_WIRE_DVOC 0x02 +#define DEVICE_WIRE_DVOBC 0x03 +#define DEVICE_WIRE_DVOBB 0x05 +#define DEVICE_WIRE_DVOCC 0x06 +#define DEVICE_WIRE_DVOB_MASTER 0x0d +#define DEVICE_WIRE_DVOC_MASTER 0x0e + +#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */ +#define DEVICE_PORT_DVOB 0x01 +#define DEVICE_PORT_DVOC 0x02 + +struct child_device_config { + u16 handle; + u16 device_type; + u8 device_id[10]; /* ascii string */ + u16 addin_offset; + u8 dvo_port; /* See Device_PORT_* above */ + u8 i2c_pin; + u8 slave_addr; + u8 ddc_pin; + u16 edid_ptr; + u8 dvo_cfg; /* See DEVICE_CFG_* above */ + u8 dvo2_port; + u8 i2c2_pin; + u8 slave2_addr; + u8 ddc2_pin; + u8 capabilities; + u8 dvo_wiring;/* See DEVICE_WIRE_* above */ + u8 dvo2_wiring; + u16 extended_type; + u8 dvo_function; +} __packed; + + +struct bdb_general_definitions { + /* DDC GPIO */ + u8 crt_ddc_gmbus_pin; + + /* DPMS bits */ + u8 dpms_acpi:1; + u8 skip_boot_crt_detect:1; + u8 dpms_aim:1; + u8 rsvd1:5; /* finish byte */ + + /* boot device bits */ + u8 boot_display[2]; + u8 child_dev_size; + + /* + * Device info: + * If TV is present, it'll be at devices[0]. + * LVDS will be next, either devices[0] or [1], if present. + * On some platforms the number of device is 6. But could be as few as + * 4 if both TV and LVDS are missing. + * And the device num is related with the size of general definition + * block. It is obtained by using the following formula: + * number = (block_size - sizeof(bdb_general_definitions))/ + * sizeof(child_device_config); + */ + struct child_device_config devices[]; +}; + +struct bdb_lvds_options { + u8 panel_type; + u8 rsvd1; + /* LVDS capabilities, stored in a dword */ + u8 pfit_mode:2; + u8 pfit_text_mode_enhanced:1; + u8 pfit_gfx_mode_enhanced:1; + u8 pfit_ratio_auto:1; + u8 pixel_dither:1; + u8 lvds_edid:1; + u8 rsvd2:1; + u8 rsvd4; +} __packed; + +struct bdb_lvds_backlight { + u8 type:2; + u8 pol:1; + u8 gpio:3; + u8 gmbus:2; + u16 freq; + u8 minbrightness; + u8 i2caddr; + u8 brightnesscmd; + /*FIXME: more...*/ +} __packed; + +/* LFP pointer table contains entries to the struct below */ +struct bdb_lvds_lfp_data_ptr { + u16 fp_timing_offset; /* offsets are from start of bdb */ + u8 fp_table_size; + u16 dvo_timing_offset; + u8 dvo_table_size; + u16 panel_pnp_id_offset; + u8 pnp_table_size; +} __packed; + +struct bdb_lvds_lfp_data_ptrs { + u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */ + struct bdb_lvds_lfp_data_ptr ptr[16]; +} __packed; + +/* LFP data has 3 blocks per entry */ +struct lvds_fp_timing { + u16 x_res; + u16 y_res; + u32 lvds_reg; + u32 lvds_reg_val; + u32 pp_on_reg; + u32 pp_on_reg_val; + u32 pp_off_reg; + u32 pp_off_reg_val; + u32 pp_cycle_reg; + u32 pp_cycle_reg_val; + u32 pfit_reg; + u32 pfit_reg_val; + u16 terminator; +} __packed; + +struct lvds_dvo_timing { + u16 clock; /**< In 10khz */ + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_off_lo; + u8 hsync_pulse_width; + u8 vsync_pulse_width:4; + u8 vsync_off:4; + u8 rsvd0:6; + u8 hsync_off_hi:2; + u8 h_image; + u8 v_image; + u8 max_hv; + u8 h_border; + u8 v_border; + u8 rsvd1:3; + u8 digital:2; + u8 vsync_positive:1; + u8 hsync_positive:1; + u8 rsvd2:1; +} __packed; + +struct lvds_pnp_id { + u16 mfg_name; + u16 product_code; + u32 serial; + u8 mfg_week; + u8 mfg_year; +} __packed; + +struct bdb_lvds_lfp_data_entry { + struct lvds_fp_timing fp_timing; + struct lvds_dvo_timing dvo_timing; + struct lvds_pnp_id pnp_id; +} __packed; + +struct bdb_lvds_lfp_data { + struct bdb_lvds_lfp_data_entry data[16]; +} __packed; + +struct aimdb_header { + char signature[16]; + char oem_device[20]; + u16 aimdb_version; + u16 aimdb_header_size; + u16 aimdb_size; +} __packed; + +struct aimdb_block { + u8 aimdb_id; + u16 aimdb_size; +} __packed; + +struct vch_panel_data { + u16 fp_timing_offset; + u8 fp_timing_size; + u16 dvo_timing_offset; + u8 dvo_timing_size; + u16 text_fitting_offset; + u8 text_fitting_size; + u16 graphics_fitting_offset; + u8 graphics_fitting_size; +} __packed; + +struct vch_bdb_22 { + struct aimdb_block aimdb_block; + struct vch_panel_data panels[16]; +} __packed; + +struct bdb_sdvo_lvds_options { + u8 panel_backlight; + u8 h40_set_panel_type; + u8 panel_type; + u8 ssc_clk_freq; + u16 als_low_trip; + u16 als_high_trip; + u8 sclalarcoeff_tab_row_num; + u8 sclalarcoeff_tab_row_size; + u8 coefficient[8]; + u8 panel_misc_bits_1; + u8 panel_misc_bits_2; + u8 panel_misc_bits_3; + u8 panel_misc_bits_4; +} __packed; + +#define BDB_DRIVER_FEATURE_NO_LVDS 0 +#define BDB_DRIVER_FEATURE_INT_LVDS 1 +#define BDB_DRIVER_FEATURE_SDVO_LVDS 2 +#define BDB_DRIVER_FEATURE_EDP 3 + +struct bdb_driver_features { + u8 boot_dev_algorithm:1; + u8 block_display_switch:1; + u8 allow_display_switch:1; + u8 hotplug_dvo:1; + u8 dual_view_zoom:1; + u8 int15h_hook:1; + u8 sprite_in_clone:1; + u8 primary_lfp_id:1; + + u16 boot_mode_x; + u16 boot_mode_y; + u8 boot_mode_bpp; + u8 boot_mode_refresh; + + u16 enable_lfp_primary:1; + u16 selective_mode_pruning:1; + u16 dual_frequency:1; + u16 render_clock_freq:1; /* 0: high freq; 1: low freq */ + u16 nt_clone_support:1; + u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */ + u16 sprite_display_assign:1; /* 0: secondary; 1: primary */ + u16 cui_aspect_scaling:1; + u16 preserve_aspect_ratio:1; + u16 sdvo_device_power_down:1; + u16 crt_hotplug:1; + u16 lvds_config:2; + u16 tv_hotplug:1; + u16 hdmi_config:2; + + u8 static_display:1; + u8 reserved2:7; + u16 legacy_crt_max_x; + u16 legacy_crt_max_y; + u8 legacy_crt_max_refresh; + + u8 hdmi_termination; + u8 custom_vbt_version; +} __packed; + +#define EDP_18BPP 0 +#define EDP_24BPP 1 +#define EDP_30BPP 2 +#define EDP_RATE_1_62 0 +#define EDP_RATE_2_7 1 +#define EDP_LANE_1 0 +#define EDP_LANE_2 1 +#define EDP_LANE_4 3 +#define EDP_PREEMPHASIS_NONE 0 +#define EDP_PREEMPHASIS_3_5dB 1 +#define EDP_PREEMPHASIS_6dB 2 +#define EDP_PREEMPHASIS_9_5dB 3 +#define EDP_VSWING_0_4V 0 +#define EDP_VSWING_0_6V 1 +#define EDP_VSWING_0_8V 2 +#define EDP_VSWING_1_2V 3 + +struct edp_power_seq { + u16 t1_t3; + u16 t8; + u16 t9; + u16 t10; + u16 t11_t12; +} __attribute__ ((packed)); + +struct edp_link_params { + u8 rate:4; + u8 lanes:4; + u8 preemphasis:4; + u8 vswing:4; +} __attribute__ ((packed)); + +struct bdb_edp { + struct edp_power_seq power_seqs[16]; + u32 color_depth; + u32 sdrrs_msa_timing_delay; + struct edp_link_params link_params[16]; +} __attribute__ ((packed)); + +extern int psb_intel_init_bios(struct drm_device *dev); +extern void psb_intel_destroy_bios(struct drm_device *dev); + +/* + * Driver<->VBIOS interaction occurs through scratch bits in + * GR18 & SWF*. + */ + +/* GR18 bits are set on display switch and hotkey events */ +#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ +#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ +#define GR18_HK_NONE (0x0<<3) +#define GR18_HK_LFP_STRETCH (0x1<<3) +#define GR18_HK_TOGGLE_DISP (0x2<<3) +#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ +#define GR18_HK_POPUP_DISABLED (0x6<<3) +#define GR18_HK_POPUP_ENABLED (0x7<<3) +#define GR18_HK_PFIT (0x8<<3) +#define GR18_HK_APM_CHANGE (0xa<<3) +#define GR18_HK_MULTIPLE (0xc<<3) +#define GR18_USER_INT_EN (1<<2) +#define GR18_A0000_FLUSH_EN (1<<1) +#define GR18_SMM_EN (1<<0) + +/* Set by driver, cleared by VBIOS */ +#define SWF00_YRES_SHIFT 16 +#define SWF00_XRES_SHIFT 0 +#define SWF00_RES_MASK 0xffff + +/* Set by VBIOS at boot time and driver at runtime */ +#define SWF01_TV2_FORMAT_SHIFT 8 +#define SWF01_TV1_FORMAT_SHIFT 0 +#define SWF01_TV_FORMAT_MASK 0xffff + +#define SWF10_VBIOS_BLC_I2C_EN (1<<29) +#define SWF10_GTT_OVERRIDE_EN (1<<28) +#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ +#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) +#define SWF10_OLD_TOGGLE 0x0 +#define SWF10_TOGGLE_LIST_1 0x1 +#define SWF10_TOGGLE_LIST_2 0x2 +#define SWF10_TOGGLE_LIST_3 0x3 +#define SWF10_TOGGLE_LIST_4 0x4 +#define SWF10_PANNING_EN (1<<23) +#define SWF10_DRIVER_LOADED (1<<22) +#define SWF10_EXTENDED_DESKTOP (1<<21) +#define SWF10_EXCLUSIVE_MODE (1<<20) +#define SWF10_OVERLAY_EN (1<<19) +#define SWF10_PLANEB_HOLDOFF (1<<18) +#define SWF10_PLANEA_HOLDOFF (1<<17) +#define SWF10_VGA_HOLDOFF (1<<16) +#define SWF10_ACTIVE_DISP_MASK 0xffff +#define SWF10_PIPEB_LFP2 (1<<15) +#define SWF10_PIPEB_EFP2 (1<<14) +#define SWF10_PIPEB_TV2 (1<<13) +#define SWF10_PIPEB_CRT2 (1<<12) +#define SWF10_PIPEB_LFP (1<<11) +#define SWF10_PIPEB_EFP (1<<10) +#define SWF10_PIPEB_TV (1<<9) +#define SWF10_PIPEB_CRT (1<<8) +#define SWF10_PIPEA_LFP2 (1<<7) +#define SWF10_PIPEA_EFP2 (1<<6) +#define SWF10_PIPEA_TV2 (1<<5) +#define SWF10_PIPEA_CRT2 (1<<4) +#define SWF10_PIPEA_LFP (1<<3) +#define SWF10_PIPEA_EFP (1<<2) +#define SWF10_PIPEA_TV (1<<1) +#define SWF10_PIPEA_CRT (1<<0) + +#define SWF11_MEMORY_SIZE_SHIFT 16 +#define SWF11_SV_TEST_EN (1<<15) +#define SWF11_IS_AGP (1<<14) +#define SWF11_DISPLAY_HOLDOFF (1<<13) +#define SWF11_DPMS_REDUCED (1<<12) +#define SWF11_IS_VBE_MODE (1<<11) +#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ +#define SWF11_DPMS_MASK 0x07 +#define SWF11_DPMS_OFF (1<<2) +#define SWF11_DPMS_SUSPEND (1<<1) +#define SWF11_DPMS_STANDBY (1<<0) +#define SWF11_DPMS_ON 0 + +#define SWF14_GFX_PFIT_EN (1<<31) +#define SWF14_TEXT_PFIT_EN (1<<30) +#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */ +#define SWF14_POPUP_EN (1<<28) +#define SWF14_DISPLAY_HOLDOFF (1<<27) +#define SWF14_DISP_DETECT_EN (1<<26) +#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ +#define SWF14_DRIVER_STATUS (1<<24) +#define SWF14_OS_TYPE_WIN9X (1<<23) +#define SWF14_OS_TYPE_WINNT (1<<22) +/* 21:19 rsvd */ +#define SWF14_PM_TYPE_MASK 0x00070000 +#define SWF14_PM_ACPI_VIDEO (0x4 << 16) +#define SWF14_PM_ACPI (0x3 << 16) +#define SWF14_PM_APM_12 (0x2 << 16) +#define SWF14_PM_APM_11 (0x1 << 16) +#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ + /* if GR18 indicates a display switch */ +#define SWF14_DS_PIPEB_LFP2_EN (1<<15) +#define SWF14_DS_PIPEB_EFP2_EN (1<<14) +#define SWF14_DS_PIPEB_TV2_EN (1<<13) +#define SWF14_DS_PIPEB_CRT2_EN (1<<12) +#define SWF14_DS_PIPEB_LFP_EN (1<<11) +#define SWF14_DS_PIPEB_EFP_EN (1<<10) +#define SWF14_DS_PIPEB_TV_EN (1<<9) +#define SWF14_DS_PIPEB_CRT_EN (1<<8) +#define SWF14_DS_PIPEA_LFP2_EN (1<<7) +#define SWF14_DS_PIPEA_EFP2_EN (1<<6) +#define SWF14_DS_PIPEA_TV2_EN (1<<5) +#define SWF14_DS_PIPEA_CRT2_EN (1<<4) +#define SWF14_DS_PIPEA_LFP_EN (1<<3) +#define SWF14_DS_PIPEA_EFP_EN (1<<2) +#define SWF14_DS_PIPEA_TV_EN (1<<1) +#define SWF14_DS_PIPEA_CRT_EN (1<<0) + /* if GR18 indicates a panel fitting request */ +#define SWF14_PFIT_EN (1<<0) /* 0 means disable */ + /* if GR18 indicates an APM change request */ +#define SWF14_APM_HIBERNATE 0x4 +#define SWF14_APM_SUSPEND 0x3 +#define SWF14_APM_STANDBY 0x1 +#define SWF14_APM_RESTORE 0x0 + +/* Add the device class for LFP, TV, HDMI */ +#define DEVICE_TYPE_INT_LFP 0x1022 +#define DEVICE_TYPE_INT_TV 0x1009 +#define DEVICE_TYPE_HDMI 0x60D2 +#define DEVICE_TYPE_DP 0x68C6 +#define DEVICE_TYPE_eDP 0x78C6 + +/* define the DVO port for HDMI output type */ +#define DVO_B 1 +#define DVO_C 2 +#define DVO_D 3 + +/* define the PORT for DP output type */ +#define PORT_IDPB 7 +#define PORT_IDPC 8 +#define PORT_IDPD 9 + +#endif /* _INTEL_BIOS_H_ */ diff --git a/drivers/gpu/drm/gma500/intel_gmbus.c b/drivers/gpu/drm/gma500/intel_gmbus.c new file mode 100644 index 000000000..09cedabf4 --- /dev/null +++ b/drivers/gpu/drm/gma500/intel_gmbus.c @@ -0,0 +1,501 @@ +/* + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * Copyright © 2006-2008,2010 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Chris Wilson <chris@chris-wilson.co.uk> + */ + +#include <linux/delay.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/module.h> + +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +#define _wait_for(COND, MS, W) ({ \ + unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ + int ret__ = 0; \ + while (! (COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + if (W && !(in_dbg_master())) \ + msleep(W); \ + } \ + ret__; \ +}) + +#define wait_for(COND, MS) _wait_for(COND, MS, 1) + +#define GMBUS_REG_READ(reg) ioread32(dev_priv->gmbus_reg + (reg)) +#define GMBUS_REG_WRITE(reg, val) iowrite32((val), dev_priv->gmbus_reg + (reg)) + +/* Intel GPIO access functions */ + +#define I2C_RISEFALL_TIME 20 + +static inline struct intel_gmbus * +to_intel_gmbus(struct i2c_adapter *i2c) +{ + return container_of(i2c, struct intel_gmbus, adapter); +} + +struct intel_gpio { + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo; + struct drm_psb_private *dev_priv; + u32 reg; +}; + +void +gma_intel_i2c_reset(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + GMBUS_REG_WRITE(GMBUS0, 0); +} + +static void intel_i2c_quirk_set(struct drm_psb_private *dev_priv, bool enable) +{ + /* When using bit bashing for I2C, this bit needs to be set to 1 */ + /* FIXME: We are never Pineview, right? + + u32 val; + + if (!IS_PINEVIEW(dev_priv->dev)) + return; + + val = REG_READ(DSPCLK_GATE_D); + if (enable) + val |= DPCUNIT_CLOCK_GATE_DISABLE; + else + val &= ~DPCUNIT_CLOCK_GATE_DISABLE; + REG_WRITE(DSPCLK_GATE_D, val); + + return; + */ +} + +static u32 get_reserved(struct intel_gpio *gpio) +{ + struct drm_psb_private *dev_priv = gpio->dev_priv; + u32 reserved = 0; + + /* On most chips, these bits must be preserved in software. */ + reserved = GMBUS_REG_READ(gpio->reg) & + (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + return reserved; +} + +static int get_clock(void *data) +{ + struct intel_gpio *gpio = data; + struct drm_psb_private *dev_priv = gpio->dev_priv; + u32 reserved = get_reserved(gpio); + GMBUS_REG_WRITE(gpio->reg, reserved | GPIO_CLOCK_DIR_MASK); + GMBUS_REG_WRITE(gpio->reg, reserved); + return (GMBUS_REG_READ(gpio->reg) & GPIO_CLOCK_VAL_IN) != 0; +} + +static int get_data(void *data) +{ + struct intel_gpio *gpio = data; + struct drm_psb_private *dev_priv = gpio->dev_priv; + u32 reserved = get_reserved(gpio); + GMBUS_REG_WRITE(gpio->reg, reserved | GPIO_DATA_DIR_MASK); + GMBUS_REG_WRITE(gpio->reg, reserved); + return (GMBUS_REG_READ(gpio->reg) & GPIO_DATA_VAL_IN) != 0; +} + +static void set_clock(void *data, int state_high) +{ + struct intel_gpio *gpio = data; + struct drm_psb_private *dev_priv = gpio->dev_priv; + u32 reserved = get_reserved(gpio); + u32 clock_bits; + + if (state_high) + clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK; + else + clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK | + GPIO_CLOCK_VAL_MASK; + + GMBUS_REG_WRITE(gpio->reg, reserved | clock_bits); + GMBUS_REG_READ(gpio->reg); /* Posting */ +} + +static void set_data(void *data, int state_high) +{ + struct intel_gpio *gpio = data; + struct drm_psb_private *dev_priv = gpio->dev_priv; + u32 reserved = get_reserved(gpio); + u32 data_bits; + + if (state_high) + data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; + else + data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | + GPIO_DATA_VAL_MASK; + + GMBUS_REG_WRITE(gpio->reg, reserved | data_bits); + GMBUS_REG_READ(gpio->reg); +} + +static struct i2c_adapter * +intel_gpio_create(struct drm_psb_private *dev_priv, u32 pin) +{ + static const int map_pin_to_reg[] = { + 0, + GPIOB, + GPIOA, + GPIOC, + GPIOD, + GPIOE, + 0, + GPIOF, + }; + struct intel_gpio *gpio; + + if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin]) + return NULL; + + gpio = kzalloc(sizeof(struct intel_gpio), GFP_KERNEL); + if (gpio == NULL) + return NULL; + + gpio->reg = map_pin_to_reg[pin]; + gpio->dev_priv = dev_priv; + + snprintf(gpio->adapter.name, sizeof(gpio->adapter.name), + "gma500 GPIO%c", "?BACDE?F"[pin]); + gpio->adapter.owner = THIS_MODULE; + gpio->adapter.algo_data = &gpio->algo; + gpio->adapter.dev.parent = dev_priv->dev.dev; + gpio->algo.setsda = set_data; + gpio->algo.setscl = set_clock; + gpio->algo.getsda = get_data; + gpio->algo.getscl = get_clock; + gpio->algo.udelay = I2C_RISEFALL_TIME; + gpio->algo.timeout = usecs_to_jiffies(2200); + gpio->algo.data = gpio; + + if (i2c_bit_add_bus(&gpio->adapter)) + goto out_free; + + return &gpio->adapter; + +out_free: + kfree(gpio); + return NULL; +} + +static int +intel_i2c_quirk_xfer(struct drm_psb_private *dev_priv, + struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + struct intel_gpio *gpio = container_of(adapter, + struct intel_gpio, + adapter); + int ret; + + gma_intel_i2c_reset(&dev_priv->dev); + + intel_i2c_quirk_set(dev_priv, true); + set_data(gpio, 1); + set_clock(gpio, 1); + udelay(I2C_RISEFALL_TIME); + + ret = adapter->algo->master_xfer(adapter, msgs, num); + + set_data(gpio, 1); + set_clock(gpio, 1); + intel_i2c_quirk_set(dev_priv, false); + + return ret; +} + +static int +gmbus_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + struct drm_psb_private *dev_priv = adapter->algo_data; + int i, reg_offset; + + if (bus->force_bit) + return intel_i2c_quirk_xfer(dev_priv, + bus->force_bit, msgs, num); + + reg_offset = 0; + + GMBUS_REG_WRITE(GMBUS0 + reg_offset, bus->reg0); + + for (i = 0; i < num; i++) { + u16 len = msgs[i].len; + u8 *buf = msgs[i].buf; + + if (msgs[i].flags & I2C_M_RD) { + GMBUS_REG_WRITE(GMBUS1 + reg_offset, + GMBUS_CYCLE_WAIT | + (i + 1 == num ? GMBUS_CYCLE_STOP : 0) | + (len << GMBUS_BYTE_COUNT_SHIFT) | + (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) | + GMBUS_SLAVE_READ | GMBUS_SW_RDY); + GMBUS_REG_READ(GMBUS2+reg_offset); + do { + u32 val, loop = 0; + + if (wait_for(GMBUS_REG_READ(GMBUS2 + reg_offset) & + (GMBUS_SATOER | GMBUS_HW_RDY), 50)) + goto timeout; + if (GMBUS_REG_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) + goto clear_err; + + val = GMBUS_REG_READ(GMBUS3 + reg_offset); + do { + *buf++ = val & 0xff; + val >>= 8; + } while (--len && ++loop < 4); + } while (len); + } else { + u32 val, loop; + + val = loop = 0; + do { + val |= *buf++ << (8 * loop); + } while (--len && ++loop < 4); + + GMBUS_REG_WRITE(GMBUS3 + reg_offset, val); + GMBUS_REG_WRITE(GMBUS1 + reg_offset, + (i + 1 == num ? GMBUS_CYCLE_STOP : GMBUS_CYCLE_WAIT) | + (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) | + (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) | + GMBUS_SLAVE_WRITE | GMBUS_SW_RDY); + GMBUS_REG_READ(GMBUS2+reg_offset); + + while (len) { + if (wait_for(GMBUS_REG_READ(GMBUS2 + reg_offset) & + (GMBUS_SATOER | GMBUS_HW_RDY), 50)) + goto timeout; + if (GMBUS_REG_READ(GMBUS2 + reg_offset) & + GMBUS_SATOER) + goto clear_err; + + val = loop = 0; + do { + val |= *buf++ << (8 * loop); + } while (--len && ++loop < 4); + + GMBUS_REG_WRITE(GMBUS3 + reg_offset, val); + GMBUS_REG_READ(GMBUS2+reg_offset); + } + } + + if (i + 1 < num && wait_for(GMBUS_REG_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50)) + goto timeout; + if (GMBUS_REG_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) + goto clear_err; + } + + goto done; + +clear_err: + /* Toggle the Software Clear Interrupt bit. This has the effect + * of resetting the GMBUS controller and so clearing the + * BUS_ERROR raised by the slave's NAK. + */ + GMBUS_REG_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT); + GMBUS_REG_WRITE(GMBUS1 + reg_offset, 0); + +done: + /* Mark the GMBUS interface as disabled. We will re-enable it at the + * start of the next xfer, till then let it sleep. + */ + GMBUS_REG_WRITE(GMBUS0 + reg_offset, 0); + return i; + +timeout: + DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n", + bus->reg0 & 0xff, bus->adapter.name); + GMBUS_REG_WRITE(GMBUS0 + reg_offset, 0); + + /* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */ + bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff); + if (!bus->force_bit) + return -ENOMEM; + + return intel_i2c_quirk_xfer(dev_priv, bus->force_bit, msgs, num); +} + +static u32 gmbus_func(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + + if (bus->force_bit) + bus->force_bit->algo->functionality(bus->force_bit); + + return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + /* I2C_FUNC_10BIT_ADDR | */ + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL); +} + +static const struct i2c_algorithm gmbus_algorithm = { + .master_xfer = gmbus_xfer, + .functionality = gmbus_func +}; + +/** + * gma_intel_setup_gmbus() - instantiate all Intel i2c GMBuses + * @dev: DRM device + */ +int gma_intel_setup_gmbus(struct drm_device *dev) +{ + static const char *names[GMBUS_NUM_PORTS] = { + "disabled", + "ssc", + "vga", + "panel", + "dpc", + "dpb", + "reserved", + "dpd", + }; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int ret, i; + + dev_priv->gmbus = kcalloc(GMBUS_NUM_PORTS, sizeof(struct intel_gmbus), + GFP_KERNEL); + if (dev_priv->gmbus == NULL) + return -ENOMEM; + + if (IS_MRST(dev)) + dev_priv->gmbus_reg = dev_priv->aux_reg; + else + dev_priv->gmbus_reg = dev_priv->vdc_reg; + + for (i = 0; i < GMBUS_NUM_PORTS; i++) { + struct intel_gmbus *bus = &dev_priv->gmbus[i]; + + bus->adapter.owner = THIS_MODULE; + bus->adapter.class = I2C_CLASS_DDC; + snprintf(bus->adapter.name, + sizeof(bus->adapter.name), + "gma500 gmbus %s", + names[i]); + + bus->adapter.dev.parent = dev->dev; + bus->adapter.algo_data = dev_priv; + + bus->adapter.algo = &gmbus_algorithm; + ret = i2c_add_adapter(&bus->adapter); + if (ret) + goto err; + + /* By default use a conservative clock rate */ + bus->reg0 = i | GMBUS_RATE_100KHZ; + + /* XXX force bit banging until GMBUS is fully debugged */ + bus->force_bit = intel_gpio_create(dev_priv, i); + } + + gma_intel_i2c_reset(&dev_priv->dev); + + return 0; + +err: + while (i--) { + struct intel_gmbus *bus = &dev_priv->gmbus[i]; + i2c_del_adapter(&bus->adapter); + } + kfree(dev_priv->gmbus); + dev_priv->gmbus = NULL; + return ret; +} + +void gma_intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + + /* speed: + * 0x0 = 100 KHz + * 0x1 = 50 KHz + * 0x2 = 400 KHz + * 0x3 = 1000 Khz + */ + bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | (speed << 8); +} + +void gma_intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit) +{ + struct intel_gmbus *bus = to_intel_gmbus(adapter); + + if (force_bit) { + if (bus->force_bit == NULL) { + struct drm_psb_private *dev_priv = adapter->algo_data; + bus->force_bit = intel_gpio_create(dev_priv, + bus->reg0 & 0xff); + } + } else { + if (bus->force_bit) { + i2c_del_adapter(bus->force_bit); + kfree(bus->force_bit); + bus->force_bit = NULL; + } + } +} + +void gma_intel_teardown_gmbus(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int i; + + if (dev_priv->gmbus == NULL) + return; + + for (i = 0; i < GMBUS_NUM_PORTS; i++) { + struct intel_gmbus *bus = &dev_priv->gmbus[i]; + if (bus->force_bit) { + i2c_del_adapter(bus->force_bit); + kfree(bus->force_bit); + } + i2c_del_adapter(&bus->adapter); + } + + dev_priv->gmbus_reg = NULL; /* iounmap is done in driver_unload */ + kfree(dev_priv->gmbus); + dev_priv->gmbus = NULL; +} diff --git a/drivers/gpu/drm/gma500/intel_i2c.c b/drivers/gpu/drm/gma500/intel_i2c.c new file mode 100644 index 000000000..9d02a7b6d --- /dev/null +++ b/drivers/gpu/drm/gma500/intel_i2c.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2006-2007 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> + +#include "psb_drv.h" +#include "psb_intel_reg.h" + +/* + * Intel GPIO access functions + */ + +#define I2C_RISEFALL_TIME 20 + +static int get_clock(void *data) +{ + struct gma_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + u32 val; + + val = REG_READ(chan->reg); + return (val & GPIO_CLOCK_VAL_IN) != 0; +} + +static int get_data(void *data) +{ + struct gma_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + u32 val; + + val = REG_READ(chan->reg); + return (val & GPIO_DATA_VAL_IN) != 0; +} + +static void set_clock(void *data, int state_high) +{ + struct gma_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + u32 reserved = 0, clock_bits; + + /* On most chips, these bits must be preserved in software. */ + reserved = + REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK; + else + clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK | + GPIO_CLOCK_VAL_MASK; + REG_WRITE(chan->reg, reserved | clock_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +static void set_data(void *data, int state_high) +{ + struct gma_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + u32 reserved = 0, data_bits; + + /* On most chips, these bits must be preserved in software. */ + reserved = + REG_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; + else + data_bits = + GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | + GPIO_DATA_VAL_MASK; + + REG_WRITE(chan->reg, reserved | data_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +/** + * gma_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg + * @dev: DRM device + * @reg: GPIO reg to use + * @name: name for this bus + * + * Creates and registers a new i2c bus with the Linux i2c layer, for use + * in output probing and control (e.g. DDC or SDVO control functions). + * + * Possible values for @reg include: + * %GPIOA + * %GPIOB + * %GPIOC + * %GPIOD + * %GPIOE + * %GPIOF + * %GPIOG + * %GPIOH + * see PRM for details on how these different busses are used. + */ +struct gma_i2c_chan *gma_i2c_create(struct drm_device *dev, const u32 reg, + const char *name) +{ + struct gma_i2c_chan *chan; + + chan = kzalloc(sizeof(struct gma_i2c_chan), GFP_KERNEL); + if (!chan) + goto out_free; + + chan->drm_dev = dev; + chan->reg = reg; + snprintf(chan->base.name, I2C_NAME_SIZE, "intel drm %s", name); + chan->base.owner = THIS_MODULE; + chan->base.algo_data = &chan->algo; + chan->base.dev.parent = dev->dev; + chan->algo.setsda = set_data; + chan->algo.setscl = set_clock; + chan->algo.getsda = get_data; + chan->algo.getscl = get_clock; + chan->algo.udelay = 20; + chan->algo.timeout = usecs_to_jiffies(2200); + chan->algo.data = chan; + + i2c_set_adapdata(&chan->base, chan); + + if (i2c_bit_add_bus(&chan->base)) + goto out_free; + + /* JJJ: raise SCL and SDA? */ + set_data(chan, 1); + set_clock(chan, 1); + udelay(20); + + return chan; + +out_free: + kfree(chan); + return NULL; +} + +/** + * gma_i2c_destroy - unregister and free i2c bus resources + * @chan: channel to free + * + * Unregister the adapter from the i2c layer, then free the structure. + */ +void gma_i2c_destroy(struct gma_i2c_chan *chan) +{ + if (!chan) + return; + + i2c_del_adapter(&chan->base); + kfree(chan); +} diff --git a/drivers/gpu/drm/gma500/mid_bios.c b/drivers/gpu/drm/gma500/mid_bios.c new file mode 100644 index 000000000..7e76790c6 --- /dev/null +++ b/drivers/gpu/drm/gma500/mid_bios.c @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +/* TODO + * - Split functions by vbt type + * - Make them all take drm_device + * - Check ioremap failures + */ + +#include <drm/drm.h> + +#include "mid_bios.h" +#include "psb_drv.h" + +static void mid_get_fuse_settings(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct pci_dev *pci_root = + pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), + 0, 0); + uint32_t fuse_value = 0; + uint32_t fuse_value_tmp = 0; + +#define FB_REG06 0xD0810600 +#define FB_MIPI_DISABLE (1 << 11) +#define FB_REG09 0xD0810900 +#define FB_SKU_MASK 0x7000 +#define FB_SKU_SHIFT 12 +#define FB_SKU_100 0 +#define FB_SKU_100L 1 +#define FB_SKU_83 2 + if (pci_root == NULL) { + WARN_ON(1); + return; + } + + + pci_write_config_dword(pci_root, 0xD0, FB_REG06); + pci_read_config_dword(pci_root, 0xD4, &fuse_value); + + /* FB_MIPI_DISABLE doesn't mean LVDS on with Medfield */ + if (IS_MRST(dev)) + dev_priv->iLVDS_enable = fuse_value & FB_MIPI_DISABLE; + + DRM_INFO("internal display is %s\n", + dev_priv->iLVDS_enable ? "LVDS display" : "MIPI display"); + + /* Prevent runtime suspend at start*/ + if (dev_priv->iLVDS_enable) { + dev_priv->is_lvds_on = true; + dev_priv->is_mipi_on = false; + } else { + dev_priv->is_mipi_on = true; + dev_priv->is_lvds_on = false; + } + + dev_priv->video_device_fuse = fuse_value; + + pci_write_config_dword(pci_root, 0xD0, FB_REG09); + pci_read_config_dword(pci_root, 0xD4, &fuse_value); + + dev_dbg(dev->dev, "SKU values is 0x%x.\n", fuse_value); + fuse_value_tmp = (fuse_value & FB_SKU_MASK) >> FB_SKU_SHIFT; + + dev_priv->fuse_reg_value = fuse_value; + + switch (fuse_value_tmp) { + case FB_SKU_100: + dev_priv->core_freq = 200; + break; + case FB_SKU_100L: + dev_priv->core_freq = 100; + break; + case FB_SKU_83: + dev_priv->core_freq = 166; + break; + default: + dev_warn(dev->dev, "Invalid SKU values, SKU value = 0x%08x\n", + fuse_value_tmp); + dev_priv->core_freq = 0; + } + dev_dbg(dev->dev, "LNC core clk is %dMHz.\n", dev_priv->core_freq); + pci_dev_put(pci_root); +} + +/* + * Get the revison ID, B0:D2:F0;0x08 + */ +static void mid_get_pci_revID(struct drm_psb_private *dev_priv) +{ + uint32_t platform_rev_id = 0; + struct pci_dev *pdev = to_pci_dev(dev_priv->dev.dev); + int domain = pci_domain_nr(pdev->bus); + struct pci_dev *pci_gfx_root = + pci_get_domain_bus_and_slot(domain, 0, PCI_DEVFN(2, 0)); + + if (pci_gfx_root == NULL) { + WARN_ON(1); + return; + } + pci_read_config_dword(pci_gfx_root, 0x08, &platform_rev_id); + dev_priv->platform_rev_id = (uint8_t) platform_rev_id; + pci_dev_put(pci_gfx_root); + dev_dbg(dev_priv->dev.dev, "platform_rev_id is %x\n", dev_priv->platform_rev_id); +} + +struct mid_vbt_header { + u32 signature; + u8 revision; +} __packed; + +/* The same for r0 and r1 */ +struct vbt_r0 { + struct mid_vbt_header vbt_header; + u8 size; + u8 checksum; +} __packed; + +struct vbt_r10 { + struct mid_vbt_header vbt_header; + u8 checksum; + u16 size; + u8 panel_count; + u8 primary_panel_idx; + u8 secondary_panel_idx; + u8 __reserved[5]; +} __packed; + +static int read_vbt_r0(u32 addr, struct vbt_r0 *vbt) +{ + void __iomem *vbt_virtual; + + vbt_virtual = ioremap(addr, sizeof(*vbt)); + if (vbt_virtual == NULL) + return -1; + + memcpy_fromio(vbt, vbt_virtual, sizeof(*vbt)); + iounmap(vbt_virtual); + + return 0; +} + +static int read_vbt_r10(u32 addr, struct vbt_r10 *vbt) +{ + void __iomem *vbt_virtual; + + vbt_virtual = ioremap(addr, sizeof(*vbt)); + if (!vbt_virtual) + return -1; + + memcpy_fromio(vbt, vbt_virtual, sizeof(*vbt)); + iounmap(vbt_virtual); + + return 0; +} + +static int mid_get_vbt_data_r0(struct drm_psb_private *dev_priv, u32 addr) +{ + struct vbt_r0 vbt; + void __iomem *gct_virtual; + struct gct_r0 gct; + u8 bpi; + + if (read_vbt_r0(addr, &vbt)) + return -1; + + gct_virtual = ioremap(addr + sizeof(vbt), vbt.size - sizeof(vbt)); + if (!gct_virtual) + return -1; + memcpy_fromio(&gct, gct_virtual, sizeof(gct)); + iounmap(gct_virtual); + + bpi = gct.PD.BootPanelIndex; + dev_priv->gct_data.bpi = bpi; + dev_priv->gct_data.pt = gct.PD.PanelType; + dev_priv->gct_data.DTD = gct.panel[bpi].DTD; + dev_priv->gct_data.Panel_Port_Control = + gct.panel[bpi].Panel_Port_Control; + dev_priv->gct_data.Panel_MIPI_Display_Descriptor = + gct.panel[bpi].Panel_MIPI_Display_Descriptor; + + return 0; +} + +static int mid_get_vbt_data_r1(struct drm_psb_private *dev_priv, u32 addr) +{ + struct vbt_r0 vbt; + void __iomem *gct_virtual; + struct gct_r1 gct; + u8 bpi; + + if (read_vbt_r0(addr, &vbt)) + return -1; + + gct_virtual = ioremap(addr + sizeof(vbt), vbt.size - sizeof(vbt)); + if (!gct_virtual) + return -1; + memcpy_fromio(&gct, gct_virtual, sizeof(gct)); + iounmap(gct_virtual); + + bpi = gct.PD.BootPanelIndex; + dev_priv->gct_data.bpi = bpi; + dev_priv->gct_data.pt = gct.PD.PanelType; + dev_priv->gct_data.DTD = gct.panel[bpi].DTD; + dev_priv->gct_data.Panel_Port_Control = + gct.panel[bpi].Panel_Port_Control; + dev_priv->gct_data.Panel_MIPI_Display_Descriptor = + gct.panel[bpi].Panel_MIPI_Display_Descriptor; + + return 0; +} + +static int mid_get_vbt_data_r10(struct drm_psb_private *dev_priv, u32 addr) +{ + struct vbt_r10 vbt; + void __iomem *gct_virtual; + struct gct_r10 *gct; + struct oaktrail_timing_info *dp_ti = &dev_priv->gct_data.DTD; + struct gct_r10_timing_info *ti; + int ret = -1; + + if (read_vbt_r10(addr, &vbt)) + return -1; + + gct = kmalloc_array(vbt.panel_count, sizeof(*gct), GFP_KERNEL); + if (!gct) + return -ENOMEM; + + gct_virtual = ioremap(addr + sizeof(vbt), + sizeof(*gct) * vbt.panel_count); + if (!gct_virtual) + goto out; + memcpy_fromio(gct, gct_virtual, sizeof(*gct)); + iounmap(gct_virtual); + + dev_priv->gct_data.bpi = vbt.primary_panel_idx; + dev_priv->gct_data.Panel_MIPI_Display_Descriptor = + gct[vbt.primary_panel_idx].Panel_MIPI_Display_Descriptor; + + ti = &gct[vbt.primary_panel_idx].DTD; + dp_ti->pixel_clock = ti->pixel_clock; + dp_ti->hactive_hi = ti->hactive_hi; + dp_ti->hactive_lo = ti->hactive_lo; + dp_ti->hblank_hi = ti->hblank_hi; + dp_ti->hblank_lo = ti->hblank_lo; + dp_ti->hsync_offset_hi = ti->hsync_offset_hi; + dp_ti->hsync_offset_lo = ti->hsync_offset_lo; + dp_ti->hsync_pulse_width_hi = ti->hsync_pulse_width_hi; + dp_ti->hsync_pulse_width_lo = ti->hsync_pulse_width_lo; + dp_ti->vactive_hi = ti->vactive_hi; + dp_ti->vactive_lo = ti->vactive_lo; + dp_ti->vblank_hi = ti->vblank_hi; + dp_ti->vblank_lo = ti->vblank_lo; + dp_ti->vsync_offset_hi = ti->vsync_offset_hi; + dp_ti->vsync_offset_lo = ti->vsync_offset_lo; + dp_ti->vsync_pulse_width_hi = ti->vsync_pulse_width_hi; + dp_ti->vsync_pulse_width_lo = ti->vsync_pulse_width_lo; + + ret = 0; +out: + kfree(gct); + return ret; +} + +static void mid_get_vbt_data(struct drm_psb_private *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 addr; + u8 __iomem *vbt_virtual; + struct mid_vbt_header vbt_header; + struct pci_dev *pci_gfx_root = + pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), + 0, PCI_DEVFN(2, 0)); + int ret = -1; + + /* Get the address of the platform config vbt */ + pci_read_config_dword(pci_gfx_root, 0xFC, &addr); + pci_dev_put(pci_gfx_root); + + dev_dbg(dev->dev, "drm platform config address is %x\n", addr); + + if (!addr) + goto out; + + /* get the virtual address of the vbt */ + vbt_virtual = ioremap(addr, sizeof(vbt_header)); + if (!vbt_virtual) + goto out; + + memcpy_fromio(&vbt_header, vbt_virtual, sizeof(vbt_header)); + iounmap(vbt_virtual); + + if (memcmp(&vbt_header.signature, "$GCT", 4)) + goto out; + + dev_dbg(dev->dev, "GCT revision is %02x\n", vbt_header.revision); + + switch (vbt_header.revision) { + case 0x00: + ret = mid_get_vbt_data_r0(dev_priv, addr); + break; + case 0x01: + ret = mid_get_vbt_data_r1(dev_priv, addr); + break; + case 0x10: + ret = mid_get_vbt_data_r10(dev_priv, addr); + break; + default: + dev_err(dev->dev, "Unknown revision of GCT!\n"); + } + +out: + if (ret) + dev_err(dev->dev, "Unable to read GCT!"); + else + dev_priv->has_gct = true; +} + +int mid_chip_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + mid_get_fuse_settings(dev); + mid_get_vbt_data(dev_priv); + mid_get_pci_revID(dev_priv); + return 0; +} diff --git a/drivers/gpu/drm/gma500/mid_bios.h b/drivers/gpu/drm/gma500/mid_bios.h new file mode 100644 index 000000000..8707f7c89 --- /dev/null +++ b/drivers/gpu/drm/gma500/mid_bios.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ +struct drm_device; + +extern int mid_chip_setup(struct drm_device *dev); + diff --git a/drivers/gpu/drm/gma500/mmu.c b/drivers/gpu/drm/gma500/mmu.c new file mode 100644 index 000000000..a70b01ccd --- /dev/null +++ b/drivers/gpu/drm/gma500/mmu.c @@ -0,0 +1,772 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2007, Intel Corporation. + * + **************************************************************************/ + +#include <linux/highmem.h> + +#include "mmu.h" +#include "psb_drv.h" +#include "psb_reg.h" + +/* + * Code for the SGX MMU: + */ + +/* + * clflush on one processor only: + * clflush should apparently flush the cache line on all processors in an + * SMP system. + */ + +/* + * kmap atomic: + * The usage of the slots must be completely encapsulated within a spinlock, and + * no other functions that may be using the locks for other purposed may be + * called from within the locked region. + * Since the slots are per processor, this will guarantee that we are the only + * user. + */ + +/* + * TODO: Inserting ptes from an interrupt handler: + * This may be desirable for some SGX functionality where the GPU can fault in + * needed pages. For that, we need to make an atomic insert_pages function, that + * may fail. + * If it fails, the caller need to insert the page using a workqueue function, + * but on average it should be fast. + */ + +static inline uint32_t psb_mmu_pt_index(uint32_t offset) +{ + return (offset >> PSB_PTE_SHIFT) & 0x3FF; +} + +static inline uint32_t psb_mmu_pd_index(uint32_t offset) +{ + return offset >> PSB_PDE_SHIFT; +} + +static inline void psb_clflush(void *addr) +{ + __asm__ __volatile__("clflush (%0)\n" : : "r"(addr) : "memory"); +} + +static inline void psb_mmu_clflush(struct psb_mmu_driver *driver, void *addr) +{ + if (!driver->has_clflush) + return; + + mb(); + psb_clflush(addr); + mb(); +} + +static void psb_mmu_flush_pd_locked(struct psb_mmu_driver *driver, int force) +{ + struct drm_device *dev = driver->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (atomic_read(&driver->needs_tlbflush) || force) { + uint32_t val = PSB_RSGX32(PSB_CR_BIF_CTRL); + PSB_WSGX32(val | _PSB_CB_CTRL_INVALDC, PSB_CR_BIF_CTRL); + + /* Make sure data cache is turned off before enabling it */ + wmb(); + PSB_WSGX32(val & ~_PSB_CB_CTRL_INVALDC, PSB_CR_BIF_CTRL); + (void)PSB_RSGX32(PSB_CR_BIF_CTRL); + if (driver->msvdx_mmu_invaldc) + atomic_set(driver->msvdx_mmu_invaldc, 1); + } + atomic_set(&driver->needs_tlbflush, 0); +} + +#if 0 +static void psb_mmu_flush_pd(struct psb_mmu_driver *driver, int force) +{ + down_write(&driver->sem); + psb_mmu_flush_pd_locked(driver, force); + up_write(&driver->sem); +} +#endif + +void psb_mmu_flush(struct psb_mmu_driver *driver) +{ + struct drm_device *dev = driver->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + uint32_t val; + + down_write(&driver->sem); + val = PSB_RSGX32(PSB_CR_BIF_CTRL); + if (atomic_read(&driver->needs_tlbflush)) + PSB_WSGX32(val | _PSB_CB_CTRL_INVALDC, PSB_CR_BIF_CTRL); + else + PSB_WSGX32(val | _PSB_CB_CTRL_FLUSH, PSB_CR_BIF_CTRL); + + /* Make sure data cache is turned off and MMU is flushed before + restoring bank interface control register */ + wmb(); + PSB_WSGX32(val & ~(_PSB_CB_CTRL_FLUSH | _PSB_CB_CTRL_INVALDC), + PSB_CR_BIF_CTRL); + (void)PSB_RSGX32(PSB_CR_BIF_CTRL); + + atomic_set(&driver->needs_tlbflush, 0); + if (driver->msvdx_mmu_invaldc) + atomic_set(driver->msvdx_mmu_invaldc, 1); + up_write(&driver->sem); +} + +void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context) +{ + struct drm_device *dev = pd->driver->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + uint32_t offset = (hw_context == 0) ? PSB_CR_BIF_DIR_LIST_BASE0 : + PSB_CR_BIF_DIR_LIST_BASE1 + hw_context * 4; + + down_write(&pd->driver->sem); + PSB_WSGX32(page_to_pfn(pd->p) << PAGE_SHIFT, offset); + wmb(); + psb_mmu_flush_pd_locked(pd->driver, 1); + pd->hw_context = hw_context; + up_write(&pd->driver->sem); + +} + +static inline unsigned long psb_pd_addr_end(unsigned long addr, + unsigned long end) +{ + addr = (addr + PSB_PDE_MASK + 1) & ~PSB_PDE_MASK; + return (addr < end) ? addr : end; +} + +static inline uint32_t psb_mmu_mask_pte(uint32_t pfn, int type) +{ + uint32_t mask = PSB_PTE_VALID; + + if (type & PSB_MMU_CACHED_MEMORY) + mask |= PSB_PTE_CACHED; + if (type & PSB_MMU_RO_MEMORY) + mask |= PSB_PTE_RO; + if (type & PSB_MMU_WO_MEMORY) + mask |= PSB_PTE_WO; + + return (pfn << PAGE_SHIFT) | mask; +} + +struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver, + int trap_pagefaults, int invalid_type) +{ + struct psb_mmu_pd *pd = kmalloc(sizeof(*pd), GFP_KERNEL); + uint32_t *v; + int i; + + if (!pd) + return NULL; + + pd->p = alloc_page(GFP_DMA32); + if (!pd->p) + goto out_err1; + pd->dummy_pt = alloc_page(GFP_DMA32); + if (!pd->dummy_pt) + goto out_err2; + pd->dummy_page = alloc_page(GFP_DMA32); + if (!pd->dummy_page) + goto out_err3; + + if (!trap_pagefaults) { + pd->invalid_pde = psb_mmu_mask_pte(page_to_pfn(pd->dummy_pt), + invalid_type); + pd->invalid_pte = psb_mmu_mask_pte(page_to_pfn(pd->dummy_page), + invalid_type); + } else { + pd->invalid_pde = 0; + pd->invalid_pte = 0; + } + + v = kmap_local_page(pd->dummy_pt); + for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i) + v[i] = pd->invalid_pte; + + kunmap_local(v); + + v = kmap_local_page(pd->p); + for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i) + v[i] = pd->invalid_pde; + + kunmap_local(v); + + clear_page(kmap(pd->dummy_page)); + kunmap(pd->dummy_page); + + pd->tables = vmalloc_user(sizeof(struct psb_mmu_pt *) * 1024); + if (!pd->tables) + goto out_err4; + + pd->hw_context = -1; + pd->pd_mask = PSB_PTE_VALID; + pd->driver = driver; + + return pd; + +out_err4: + __free_page(pd->dummy_page); +out_err3: + __free_page(pd->dummy_pt); +out_err2: + __free_page(pd->p); +out_err1: + kfree(pd); + return NULL; +} + +static void psb_mmu_free_pt(struct psb_mmu_pt *pt) +{ + __free_page(pt->p); + kfree(pt); +} + +void psb_mmu_free_pagedir(struct psb_mmu_pd *pd) +{ + struct psb_mmu_driver *driver = pd->driver; + struct drm_device *dev = driver->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_mmu_pt *pt; + int i; + + down_write(&driver->sem); + if (pd->hw_context != -1) { + PSB_WSGX32(0, PSB_CR_BIF_DIR_LIST_BASE0 + pd->hw_context * 4); + psb_mmu_flush_pd_locked(driver, 1); + } + + /* Should take the spinlock here, but we don't need to do that + since we have the semaphore in write mode. */ + + for (i = 0; i < 1024; ++i) { + pt = pd->tables[i]; + if (pt) + psb_mmu_free_pt(pt); + } + + vfree(pd->tables); + __free_page(pd->dummy_page); + __free_page(pd->dummy_pt); + __free_page(pd->p); + kfree(pd); + up_write(&driver->sem); +} + +static struct psb_mmu_pt *psb_mmu_alloc_pt(struct psb_mmu_pd *pd) +{ + struct psb_mmu_pt *pt = kmalloc(sizeof(*pt), GFP_KERNEL); + void *v; + uint32_t clflush_add = pd->driver->clflush_add >> PAGE_SHIFT; + uint32_t clflush_count = PAGE_SIZE / clflush_add; + spinlock_t *lock = &pd->driver->lock; + uint8_t *clf; + uint32_t *ptes; + int i; + + if (!pt) + return NULL; + + pt->p = alloc_page(GFP_DMA32); + if (!pt->p) { + kfree(pt); + return NULL; + } + + spin_lock(lock); + + v = kmap_atomic(pt->p); + clf = (uint8_t *) v; + ptes = (uint32_t *) v; + for (i = 0; i < (PAGE_SIZE / sizeof(uint32_t)); ++i) + *ptes++ = pd->invalid_pte; + + if (pd->driver->has_clflush && pd->hw_context != -1) { + mb(); + for (i = 0; i < clflush_count; ++i) { + psb_clflush(clf); + clf += clflush_add; + } + mb(); + } + kunmap_atomic(v); + spin_unlock(lock); + + pt->count = 0; + pt->pd = pd; + pt->index = 0; + + return pt; +} + +static struct psb_mmu_pt *psb_mmu_pt_alloc_map_lock(struct psb_mmu_pd *pd, + unsigned long addr) +{ + uint32_t index = psb_mmu_pd_index(addr); + struct psb_mmu_pt *pt; + uint32_t *v; + spinlock_t *lock = &pd->driver->lock; + + spin_lock(lock); + pt = pd->tables[index]; + while (!pt) { + spin_unlock(lock); + pt = psb_mmu_alloc_pt(pd); + if (!pt) + return NULL; + spin_lock(lock); + + if (pd->tables[index]) { + spin_unlock(lock); + psb_mmu_free_pt(pt); + spin_lock(lock); + pt = pd->tables[index]; + continue; + } + + v = kmap_atomic(pd->p); + pd->tables[index] = pt; + v[index] = (page_to_pfn(pt->p) << 12) | pd->pd_mask; + pt->index = index; + kunmap_atomic((void *) v); + + if (pd->hw_context != -1) { + psb_mmu_clflush(pd->driver, (void *)&v[index]); + atomic_set(&pd->driver->needs_tlbflush, 1); + } + } + pt->v = kmap_atomic(pt->p); + return pt; +} + +static struct psb_mmu_pt *psb_mmu_pt_map_lock(struct psb_mmu_pd *pd, + unsigned long addr) +{ + uint32_t index = psb_mmu_pd_index(addr); + struct psb_mmu_pt *pt; + spinlock_t *lock = &pd->driver->lock; + + spin_lock(lock); + pt = pd->tables[index]; + if (!pt) { + spin_unlock(lock); + return NULL; + } + pt->v = kmap_atomic(pt->p); + return pt; +} + +static void psb_mmu_pt_unmap_unlock(struct psb_mmu_pt *pt) +{ + struct psb_mmu_pd *pd = pt->pd; + uint32_t *v; + + kunmap_atomic(pt->v); + if (pt->count == 0) { + v = kmap_atomic(pd->p); + v[pt->index] = pd->invalid_pde; + pd->tables[pt->index] = NULL; + + if (pd->hw_context != -1) { + psb_mmu_clflush(pd->driver, (void *)&v[pt->index]); + atomic_set(&pd->driver->needs_tlbflush, 1); + } + kunmap_atomic(v); + spin_unlock(&pd->driver->lock); + psb_mmu_free_pt(pt); + return; + } + spin_unlock(&pd->driver->lock); +} + +static inline void psb_mmu_set_pte(struct psb_mmu_pt *pt, unsigned long addr, + uint32_t pte) +{ + pt->v[psb_mmu_pt_index(addr)] = pte; +} + +static inline void psb_mmu_invalidate_pte(struct psb_mmu_pt *pt, + unsigned long addr) +{ + pt->v[psb_mmu_pt_index(addr)] = pt->pd->invalid_pte; +} + +struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver *driver) +{ + struct psb_mmu_pd *pd; + + down_read(&driver->sem); + pd = driver->default_pd; + up_read(&driver->sem); + + return pd; +} + +void psb_mmu_driver_takedown(struct psb_mmu_driver *driver) +{ + struct drm_device *dev = driver->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + PSB_WSGX32(driver->bif_ctrl, PSB_CR_BIF_CTRL); + psb_mmu_free_pagedir(driver->default_pd); + kfree(driver); +} + +struct psb_mmu_driver *psb_mmu_driver_init(struct drm_device *dev, + int trap_pagefaults, + int invalid_type, + atomic_t *msvdx_mmu_invaldc) +{ + struct psb_mmu_driver *driver; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + driver = kmalloc(sizeof(*driver), GFP_KERNEL); + + if (!driver) + return NULL; + + driver->dev = dev; + driver->default_pd = psb_mmu_alloc_pd(driver, trap_pagefaults, + invalid_type); + if (!driver->default_pd) + goto out_err1; + + spin_lock_init(&driver->lock); + init_rwsem(&driver->sem); + down_write(&driver->sem); + atomic_set(&driver->needs_tlbflush, 1); + driver->msvdx_mmu_invaldc = msvdx_mmu_invaldc; + + driver->bif_ctrl = PSB_RSGX32(PSB_CR_BIF_CTRL); + PSB_WSGX32(driver->bif_ctrl | _PSB_CB_CTRL_CLEAR_FAULT, + PSB_CR_BIF_CTRL); + PSB_WSGX32(driver->bif_ctrl & ~_PSB_CB_CTRL_CLEAR_FAULT, + PSB_CR_BIF_CTRL); + + driver->has_clflush = 0; + + if (boot_cpu_has(X86_FEATURE_CLFLUSH)) { + uint32_t tfms, misc, cap0, cap4, clflush_size; + + /* + * clflush size is determined at kernel setup for x86_64 but not + * for i386. We have to do it here. + */ + + cpuid(0x00000001, &tfms, &misc, &cap0, &cap4); + clflush_size = ((misc >> 8) & 0xff) * 8; + driver->has_clflush = 1; + driver->clflush_add = + PAGE_SIZE * clflush_size / sizeof(uint32_t); + driver->clflush_mask = driver->clflush_add - 1; + driver->clflush_mask = ~driver->clflush_mask; + } + + up_write(&driver->sem); + return driver; + +out_err1: + kfree(driver); + return NULL; +} + +static void psb_mmu_flush_ptes(struct psb_mmu_pd *pd, unsigned long address, + uint32_t num_pages, uint32_t desired_tile_stride, + uint32_t hw_tile_stride) +{ + struct psb_mmu_pt *pt; + uint32_t rows = 1; + uint32_t i; + unsigned long addr; + unsigned long end; + unsigned long next; + unsigned long add; + unsigned long row_add; + unsigned long clflush_add = pd->driver->clflush_add; + unsigned long clflush_mask = pd->driver->clflush_mask; + + if (!pd->driver->has_clflush) + return; + + if (hw_tile_stride) + rows = num_pages / desired_tile_stride; + else + desired_tile_stride = num_pages; + + add = desired_tile_stride << PAGE_SHIFT; + row_add = hw_tile_stride << PAGE_SHIFT; + mb(); + for (i = 0; i < rows; ++i) { + + addr = address; + end = addr + add; + + do { + next = psb_pd_addr_end(addr, end); + pt = psb_mmu_pt_map_lock(pd, addr); + if (!pt) + continue; + do { + psb_clflush(&pt->v[psb_mmu_pt_index(addr)]); + } while (addr += clflush_add, + (addr & clflush_mask) < next); + + psb_mmu_pt_unmap_unlock(pt); + } while (addr = next, next != end); + address += row_add; + } + mb(); +} + +void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd, + unsigned long address, uint32_t num_pages) +{ + struct psb_mmu_pt *pt; + unsigned long addr; + unsigned long end; + unsigned long next; + unsigned long f_address = address; + + down_read(&pd->driver->sem); + + addr = address; + end = addr + (num_pages << PAGE_SHIFT); + + do { + next = psb_pd_addr_end(addr, end); + pt = psb_mmu_pt_alloc_map_lock(pd, addr); + if (!pt) + goto out; + do { + psb_mmu_invalidate_pte(pt, addr); + --pt->count; + } while (addr += PAGE_SIZE, addr < next); + psb_mmu_pt_unmap_unlock(pt); + + } while (addr = next, next != end); + +out: + if (pd->hw_context != -1) + psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1); + + up_read(&pd->driver->sem); + + if (pd->hw_context != -1) + psb_mmu_flush(pd->driver); + + return; +} + +void psb_mmu_remove_pages(struct psb_mmu_pd *pd, unsigned long address, + uint32_t num_pages, uint32_t desired_tile_stride, + uint32_t hw_tile_stride) +{ + struct psb_mmu_pt *pt; + uint32_t rows = 1; + uint32_t i; + unsigned long addr; + unsigned long end; + unsigned long next; + unsigned long add; + unsigned long row_add; + unsigned long f_address = address; + + if (hw_tile_stride) + rows = num_pages / desired_tile_stride; + else + desired_tile_stride = num_pages; + + add = desired_tile_stride << PAGE_SHIFT; + row_add = hw_tile_stride << PAGE_SHIFT; + + down_read(&pd->driver->sem); + + /* Make sure we only need to flush this processor's cache */ + + for (i = 0; i < rows; ++i) { + + addr = address; + end = addr + add; + + do { + next = psb_pd_addr_end(addr, end); + pt = psb_mmu_pt_map_lock(pd, addr); + if (!pt) + continue; + do { + psb_mmu_invalidate_pte(pt, addr); + --pt->count; + + } while (addr += PAGE_SIZE, addr < next); + psb_mmu_pt_unmap_unlock(pt); + + } while (addr = next, next != end); + address += row_add; + } + if (pd->hw_context != -1) + psb_mmu_flush_ptes(pd, f_address, num_pages, + desired_tile_stride, hw_tile_stride); + + up_read(&pd->driver->sem); + + if (pd->hw_context != -1) + psb_mmu_flush(pd->driver); +} + +int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd, uint32_t start_pfn, + unsigned long address, uint32_t num_pages, + int type) +{ + struct psb_mmu_pt *pt; + uint32_t pte; + unsigned long addr; + unsigned long end; + unsigned long next; + unsigned long f_address = address; + int ret = -ENOMEM; + + down_read(&pd->driver->sem); + + addr = address; + end = addr + (num_pages << PAGE_SHIFT); + + do { + next = psb_pd_addr_end(addr, end); + pt = psb_mmu_pt_alloc_map_lock(pd, addr); + if (!pt) { + ret = -ENOMEM; + goto out; + } + do { + pte = psb_mmu_mask_pte(start_pfn++, type); + psb_mmu_set_pte(pt, addr, pte); + pt->count++; + } while (addr += PAGE_SIZE, addr < next); + psb_mmu_pt_unmap_unlock(pt); + + } while (addr = next, next != end); + ret = 0; + +out: + if (pd->hw_context != -1) + psb_mmu_flush_ptes(pd, f_address, num_pages, 1, 1); + + up_read(&pd->driver->sem); + + if (pd->hw_context != -1) + psb_mmu_flush(pd->driver); + + return ret; +} + +int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages, + unsigned long address, uint32_t num_pages, + uint32_t desired_tile_stride, uint32_t hw_tile_stride, + int type) +{ + struct psb_mmu_pt *pt; + uint32_t rows = 1; + uint32_t i; + uint32_t pte; + unsigned long addr; + unsigned long end; + unsigned long next; + unsigned long add; + unsigned long row_add; + unsigned long f_address = address; + int ret = -ENOMEM; + + if (hw_tile_stride) { + if (num_pages % desired_tile_stride != 0) + return -EINVAL; + rows = num_pages / desired_tile_stride; + } else { + desired_tile_stride = num_pages; + } + + add = desired_tile_stride << PAGE_SHIFT; + row_add = hw_tile_stride << PAGE_SHIFT; + + down_read(&pd->driver->sem); + + for (i = 0; i < rows; ++i) { + + addr = address; + end = addr + add; + + do { + next = psb_pd_addr_end(addr, end); + pt = psb_mmu_pt_alloc_map_lock(pd, addr); + if (!pt) + goto out; + do { + pte = psb_mmu_mask_pte(page_to_pfn(*pages++), + type); + psb_mmu_set_pte(pt, addr, pte); + pt->count++; + } while (addr += PAGE_SIZE, addr < next); + psb_mmu_pt_unmap_unlock(pt); + + } while (addr = next, next != end); + + address += row_add; + } + + ret = 0; +out: + if (pd->hw_context != -1) + psb_mmu_flush_ptes(pd, f_address, num_pages, + desired_tile_stride, hw_tile_stride); + + up_read(&pd->driver->sem); + + if (pd->hw_context != -1) + psb_mmu_flush(pd->driver); + + return ret; +} + +int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual, + unsigned long *pfn) +{ + int ret; + struct psb_mmu_pt *pt; + uint32_t tmp; + spinlock_t *lock = &pd->driver->lock; + + down_read(&pd->driver->sem); + pt = psb_mmu_pt_map_lock(pd, virtual); + if (!pt) { + uint32_t *v; + + spin_lock(lock); + v = kmap_atomic(pd->p); + tmp = v[psb_mmu_pd_index(virtual)]; + kunmap_atomic(v); + spin_unlock(lock); + + if (tmp != pd->invalid_pde || !(tmp & PSB_PTE_VALID) || + !(pd->invalid_pte & PSB_PTE_VALID)) { + ret = -EINVAL; + goto out; + } + ret = 0; + *pfn = pd->invalid_pte >> PAGE_SHIFT; + goto out; + } + tmp = pt->v[psb_mmu_pt_index(virtual)]; + if (!(tmp & PSB_PTE_VALID)) { + ret = -EINVAL; + } else { + ret = 0; + *pfn = tmp >> PAGE_SHIFT; + } + psb_mmu_pt_unmap_unlock(pt); +out: + up_read(&pd->driver->sem); + return ret; +} diff --git a/drivers/gpu/drm/gma500/mmu.h b/drivers/gpu/drm/gma500/mmu.h new file mode 100644 index 000000000..d4b5720ef --- /dev/null +++ b/drivers/gpu/drm/gma500/mmu.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2007-2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#ifndef __MMU_H +#define __MMU_H + +struct psb_mmu_driver { + /* protects driver- and pd structures. Always take in read mode + * before taking the page table spinlock. + */ + struct rw_semaphore sem; + + /* protects page tables, directory tables and pt tables. + * and pt structures. + */ + spinlock_t lock; + + atomic_t needs_tlbflush; + atomic_t *msvdx_mmu_invaldc; + struct psb_mmu_pd *default_pd; + uint32_t bif_ctrl; + int has_clflush; + int clflush_add; + unsigned long clflush_mask; + + struct drm_device *dev; +}; + +struct psb_mmu_pd; + +struct psb_mmu_pt { + struct psb_mmu_pd *pd; + uint32_t index; + uint32_t count; + struct page *p; + uint32_t *v; +}; + +struct psb_mmu_pd { + struct psb_mmu_driver *driver; + int hw_context; + struct psb_mmu_pt **tables; + struct page *p; + struct page *dummy_pt; + struct page *dummy_page; + uint32_t pd_mask; + uint32_t invalid_pde; + uint32_t invalid_pte; +}; + +extern struct psb_mmu_driver *psb_mmu_driver_init(struct drm_device *dev, + int trap_pagefaults, + int invalid_type, + atomic_t *msvdx_mmu_invaldc); +extern void psb_mmu_driver_takedown(struct psb_mmu_driver *driver); +extern struct psb_mmu_pd *psb_mmu_get_default_pd(struct psb_mmu_driver + *driver); +extern struct psb_mmu_pd *psb_mmu_alloc_pd(struct psb_mmu_driver *driver, + int trap_pagefaults, + int invalid_type); +extern void psb_mmu_free_pagedir(struct psb_mmu_pd *pd); +extern void psb_mmu_flush(struct psb_mmu_driver *driver); +extern void psb_mmu_remove_pfn_sequence(struct psb_mmu_pd *pd, + unsigned long address, + uint32_t num_pages); +extern int psb_mmu_insert_pfn_sequence(struct psb_mmu_pd *pd, + uint32_t start_pfn, + unsigned long address, + uint32_t num_pages, int type); +extern int psb_mmu_virtual_to_pfn(struct psb_mmu_pd *pd, uint32_t virtual, + unsigned long *pfn); +extern void psb_mmu_set_pd_context(struct psb_mmu_pd *pd, int hw_context); +extern int psb_mmu_insert_pages(struct psb_mmu_pd *pd, struct page **pages, + unsigned long address, uint32_t num_pages, + uint32_t desired_tile_stride, + uint32_t hw_tile_stride, int type); +extern void psb_mmu_remove_pages(struct psb_mmu_pd *pd, + unsigned long address, uint32_t num_pages, + uint32_t desired_tile_stride, + uint32_t hw_tile_stride); + +#endif diff --git a/drivers/gpu/drm/gma500/oaktrail.h b/drivers/gpu/drm/gma500/oaktrail.h new file mode 100644 index 000000000..8d20fa2ee --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail.h @@ -0,0 +1,247 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2007-2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +struct psb_intel_mode_device; + +/* MID device specific descriptors */ + +struct oaktrail_timing_info { + u16 pixel_clock; + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_offset_lo; + u8 hsync_pulse_width_lo; + u8 vsync_pulse_width_lo:4; + u8 vsync_offset_lo:4; + u8 vsync_pulse_width_hi:2; + u8 vsync_offset_hi:2; + u8 hsync_pulse_width_hi:2; + u8 hsync_offset_hi:2; + u8 width_mm_lo; + u8 height_mm_lo; + u8 height_mm_hi:4; + u8 width_mm_hi:4; + u8 hborder; + u8 vborder; + u8 unknown0:1; + u8 hsync_positive:1; + u8 vsync_positive:1; + u8 separate_sync:2; + u8 stereo:1; + u8 unknown6:1; + u8 interlaced:1; +} __packed; + +struct gct_r10_timing_info { + u16 pixel_clock; + u32 hactive_lo:8; + u32 hactive_hi:4; + u32 hblank_lo:8; + u32 hblank_hi:4; + u32 hsync_offset_lo:8; + u16 hsync_offset_hi:2; + u16 hsync_pulse_width_lo:8; + u16 hsync_pulse_width_hi:2; + u16 hsync_positive:1; + u16 rsvd_1:3; + u8 vactive_lo:8; + u16 vactive_hi:4; + u16 vblank_lo:8; + u16 vblank_hi:4; + u16 vsync_offset_lo:4; + u16 vsync_offset_hi:2; + u16 vsync_pulse_width_lo:4; + u16 vsync_pulse_width_hi:2; + u16 vsync_positive:1; + u16 rsvd_2:3; +} __packed; + +struct oaktrail_panel_descriptor_v1 { + u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */ + /* 0x61190 if MIPI */ + u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/ + u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/ + u32 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 dword */ + /* Register 0x61210 */ + struct oaktrail_timing_info DTD;/*18 bytes, Standard definition */ + u16 Panel_Backlight_Inverter_Descriptor;/* 16 bits, as follows */ + /* Bit 0, Frequency, 15 bits,0 - 32767Hz */ + /* Bit 15, Polarity, 1 bit, 0: Normal, 1: Inverted */ + u16 Panel_MIPI_Display_Descriptor; + /*16 bits, Defined as follows: */ + /* if MIPI, 0x0000 if LVDS */ + /* Bit 0, Type, 2 bits, */ + /* 0: Type-1, */ + /* 1: Type-2, */ + /* 2: Type-3, */ + /* 3: Type-4 */ + /* Bit 2, Pixel Format, 4 bits */ + /* Bit0: 16bpp (not supported in LNC), */ + /* Bit1: 18bpp loosely packed, */ + /* Bit2: 18bpp packed, */ + /* Bit3: 24bpp */ + /* Bit 6, Reserved, 2 bits, 00b */ + /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */ + /* Bit 14, Reserved, 2 bits, 00b */ +} __packed; + +struct oaktrail_panel_descriptor_v2 { + u32 Panel_Port_Control; /* 1 dword, Register 0x61180 if LVDS */ + /* 0x61190 if MIPI */ + u32 Panel_Power_On_Sequencing;/*1 dword,Register 0x61208,*/ + u32 Panel_Power_Off_Sequencing;/*1 dword,Register 0x6120C,*/ + u8 Panel_Power_Cycle_Delay_and_Reference_Divisor;/* 1 byte */ + /* Register 0x61210 */ + struct oaktrail_timing_info DTD;/*18 bytes, Standard definition */ + u16 Panel_Backlight_Inverter_Descriptor;/*16 bits, as follows*/ + /*Bit 0, Frequency, 16 bits, 0 - 32767Hz*/ + u8 Panel_Initial_Brightness;/* [7:0] 0 - 100% */ + /*Bit 7, Polarity, 1 bit,0: Normal, 1: Inverted*/ + u16 Panel_MIPI_Display_Descriptor; + /*16 bits, Defined as follows: */ + /* if MIPI, 0x0000 if LVDS */ + /* Bit 0, Type, 2 bits, */ + /* 0: Type-1, */ + /* 1: Type-2, */ + /* 2: Type-3, */ + /* 3: Type-4 */ + /* Bit 2, Pixel Format, 4 bits */ + /* Bit0: 16bpp (not supported in LNC), */ + /* Bit1: 18bpp loosely packed, */ + /* Bit2: 18bpp packed, */ + /* Bit3: 24bpp */ + /* Bit 6, Reserved, 2 bits, 00b */ + /* Bit 8, Minimum Supported Frame Rate, 6 bits, 0 - 63Hz */ + /* Bit 14, Reserved, 2 bits, 00b */ +} __packed; + +union oaktrail_panel_rx { + struct { + u16 NumberOfLanes:2; /*Num of Lanes, 2 bits,0 = 1 lane,*/ + /* 1 = 2 lanes, 2 = 3 lanes, 3 = 4 lanes. */ + u16 MaxLaneFreq:3; /* 0: 100MHz, 1: 200MHz, 2: 300MHz, */ + /*3: 400MHz, 4: 500MHz, 5: 600MHz, 6: 700MHz, 7: 800MHz.*/ + u16 SupportedVideoTransferMode:2; /*0: Non-burst only */ + /* 1: Burst and non-burst */ + /* 2/3: Reserved */ + u16 HSClkBehavior:1; /*0: Continuous, 1: Non-continuous*/ + u16 DuoDisplaySupport:1; /*1 bit,0: No, 1: Yes*/ + u16 ECC_ChecksumCapabilities:1;/*1 bit,0: No, 1: Yes*/ + u16 BidirectionalCommunication:1;/*1 bit,0: No, 1: Yes */ + u16 Rsvd:5;/*5 bits,00000b */ + } panelrx; + u16 panel_receiver; +} __packed; + +struct gct_r0 { + union { /*8 bits,Defined as follows: */ + struct { + u8 PanelType:4; /*4 bits, Bit field for panels*/ + /* 0 - 3: 0 = LVDS, 1 = MIPI*/ + /*2 bits,Specifies which of the*/ + u8 BootPanelIndex:2; + /* 4 panels to use by default*/ + u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/ + /* the 4 MIPI DSI receivers to use*/ + } PD; + u8 PanelDescriptor; + }; + struct oaktrail_panel_descriptor_v1 panel[4];/*panel descrs,38 bytes each*/ + union oaktrail_panel_rx panelrx[4]; /* panel receivers*/ +} __packed; + +struct gct_r1 { + union { /*8 bits,Defined as follows: */ + struct { + u8 PanelType:4; /*4 bits, Bit field for panels*/ + /* 0 - 3: 0 = LVDS, 1 = MIPI*/ + /*2 bits,Specifies which of the*/ + u8 BootPanelIndex:2; + /* 4 panels to use by default*/ + u8 BootMIPI_DSI_RxIndex:2;/*Specifies which of*/ + /* the 4 MIPI DSI receivers to use*/ + } PD; + u8 PanelDescriptor; + }; + struct oaktrail_panel_descriptor_v2 panel[4];/*panel descrs,38 bytes each*/ + union oaktrail_panel_rx panelrx[4]; /* panel receivers*/ +} __packed; + +struct gct_r10 { + struct gct_r10_timing_info DTD; + u16 Panel_MIPI_Display_Descriptor; + u16 Panel_MIPI_Receiver_Descriptor; + u16 Panel_Backlight_Inverter_Descriptor; + u8 Panel_Initial_Brightness; + u32 MIPI_Ctlr_Init_ptr; + u32 MIPI_Panel_Init_ptr; +} __packed; + +struct oaktrail_gct_data { + u8 bpi; /* boot panel index, number of panel used during boot */ + u8 pt; /* panel type, 4 bit field, 0=lvds, 1=mipi */ + struct oaktrail_timing_info DTD; /* timing info for the selected panel */ + u32 Panel_Port_Control; + u32 PP_On_Sequencing;/*1 dword,Register 0x61208,*/ + u32 PP_Off_Sequencing;/*1 dword,Register 0x6120C,*/ + u32 PP_Cycle_Delay; + u16 Panel_Backlight_Inverter_Descriptor; + u16 Panel_MIPI_Display_Descriptor; +} __packed; + +#define MODE_SETTING_IN_CRTC 0x1 +#define MODE_SETTING_IN_ENCODER 0x2 +#define MODE_SETTING_ON_GOING 0x3 +#define MODE_SETTING_IN_DSR 0x4 +#define MODE_SETTING_ENCODER_DONE 0x8 + +/* + * Moorestown HDMI interfaces + */ + +struct oaktrail_hdmi_dev { + struct pci_dev *dev; + void __iomem *regs; + unsigned int mmio, mmio_len; + int dpms_mode; + struct hdmi_i2c_dev *i2c_dev; + + /* register state */ + u32 saveDPLL_CTRL; + u32 saveDPLL_DIV_CTRL; + u32 saveDPLL_ADJUST; + u32 saveDPLL_UPDATE; + u32 saveDPLL_CLK_ENABLE; + u32 savePCH_HTOTAL_B; + u32 savePCH_HBLANK_B; + u32 savePCH_HSYNC_B; + u32 savePCH_VTOTAL_B; + u32 savePCH_VBLANK_B; + u32 savePCH_VSYNC_B; + u32 savePCH_PIPEBCONF; + u32 savePCH_PIPEBSRC; +}; + +extern void oaktrail_hdmi_setup(struct drm_device *dev); +extern void oaktrail_hdmi_teardown(struct drm_device *dev); +extern int oaktrail_hdmi_i2c_init(struct pci_dev *dev); +extern void oaktrail_hdmi_i2c_exit(struct pci_dev *dev); +extern void oaktrail_hdmi_save(struct drm_device *dev); +extern void oaktrail_hdmi_restore(struct drm_device *dev); +extern void oaktrail_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev); +extern int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y, + struct drm_framebuffer *old_fb); +extern void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode); + + diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c new file mode 100644 index 000000000..64761f46b --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c @@ -0,0 +1,666 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2009 Intel Corporation + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/pm_runtime.h> + +#include <drm/drm_fourcc.h> +#include <drm/drm_framebuffer.h> + +#include "framebuffer.h" +#include "gem.h" +#include "gma_display.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +#define MRST_LIMIT_LVDS_100L 0 +#define MRST_LIMIT_LVDS_83 1 +#define MRST_LIMIT_LVDS_100 2 +#define MRST_LIMIT_SDVO 3 + +#define MRST_DOT_MIN 19750 +#define MRST_DOT_MAX 120000 +#define MRST_M_MIN_100L 20 +#define MRST_M_MIN_100 10 +#define MRST_M_MIN_83 12 +#define MRST_M_MAX_100L 34 +#define MRST_M_MAX_100 17 +#define MRST_M_MAX_83 20 +#define MRST_P1_MIN 2 +#define MRST_P1_MAX_0 7 +#define MRST_P1_MAX_1 8 + +static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, struct gma_clock_t *best_clock); + +static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, struct gma_clock_t *best_clock); + +static const struct gma_limit_t mrst_limits[] = { + { /* MRST_LIMIT_LVDS_100L */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, + .find_pll = mrst_lvds_find_best_pll, + }, + { /* MRST_LIMIT_LVDS_83L */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0}, + .find_pll = mrst_lvds_find_best_pll, + }, + { /* MRST_LIMIT_LVDS_100 */ + .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX}, + .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100}, + .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1}, + .find_pll = mrst_lvds_find_best_pll, + }, + { /* MRST_LIMIT_SDVO */ + .vco = {.min = 1400000, .max = 2800000}, + .n = {.min = 3, .max = 7}, + .m = {.min = 80, .max = 137}, + .p1 = {.min = 1, .max = 2}, + .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 10}, + .find_pll = mrst_sdvo_find_best_pll, + }, +}; + +#define MRST_M_MIN 10 +static const u32 oaktrail_m_converts[] = { + 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C, + 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25, + 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c, +}; + +static const struct gma_limit_t *mrst_limit(struct drm_crtc *crtc, + int refclk) +{ + const struct gma_limit_t *limit = NULL; + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) + || gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) { + switch (dev_priv->core_freq) { + case 100: + limit = &mrst_limits[MRST_LIMIT_LVDS_100L]; + break; + case 166: + limit = &mrst_limits[MRST_LIMIT_LVDS_83]; + break; + case 200: + limit = &mrst_limits[MRST_LIMIT_LVDS_100]; + break; + } + } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { + limit = &mrst_limits[MRST_LIMIT_SDVO]; + } else { + limit = NULL; + dev_err(dev->dev, "mrst_limit Wrong display type.\n"); + } + + return limit; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ +static void mrst_lvds_clock(int refclk, struct gma_clock_t *clock) +{ + clock->dot = (refclk * clock->m) / (14 * clock->p1); +} + +static void mrst_print_pll(struct gma_clock_t *clock) +{ + DRM_DEBUG_DRIVER("dotclock=%d, m=%d, m1=%d, m2=%d, n=%d, p1=%d, p2=%d\n", + clock->dot, clock->m, clock->m1, clock->m2, clock->n, + clock->p1, clock->p2); +} + +static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, struct gma_clock_t *best_clock) +{ + struct gma_clock_t clock; + u32 target_vco, actual_freq; + s32 freq_error, min_error = 100000; + + memset(best_clock, 0, sizeof(*best_clock)); + memset(&clock, 0, sizeof(clock)); + + for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { + for (clock.n = limit->n.min; clock.n <= limit->n.max; + clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; clock.p1++) { + /* p2 value always stored in p2_slow on SDVO */ + clock.p = clock.p1 * limit->p2.p2_slow; + target_vco = target * clock.p; + + /* VCO will increase at this point so break */ + if (target_vco > limit->vco.max) + break; + + if (target_vco < limit->vco.min) + continue; + + actual_freq = (refclk * clock.m) / + (clock.n * clock.p); + freq_error = 10000 - + ((target * 10000) / actual_freq); + + if (freq_error < -min_error) { + /* freq_error will start to decrease at + this point so break */ + break; + } + + if (freq_error < 0) + freq_error = -freq_error; + + if (freq_error < min_error) { + min_error = freq_error; + *best_clock = clock; + } + } + } + if (min_error == 0) + break; + } + + return min_error == 0; +} + +/* + * Returns a set of divisors for the desired target clock with the given refclk, + * or FALSE. Divisor values are the actual divisors for + */ +static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit, + struct drm_crtc *crtc, int target, + int refclk, struct gma_clock_t *best_clock) +{ + struct gma_clock_t clock; + int err = target; + + memset(best_clock, 0, sizeof(*best_clock)); + memset(&clock, 0, sizeof(clock)); + + for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { + for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; + clock.p1++) { + int this_err; + + mrst_lvds_clock(refclk, &clock); + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + return err != target; +} + +/* + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + u32 temp; + int i; + int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0; + + if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) { + oaktrail_crtc_hdmi_dpms(crtc, mode); + return; + } + + if (!gma_power_begin(dev, true)) + return; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + for (i = 0; i <= need_aux; i++) { + /* Enable the DPLL */ + temp = REG_READ_WITH_AUX(map->dpll, i); + if ((temp & DPLL_VCO_ENABLE) == 0) { + REG_WRITE_WITH_AUX(map->dpll, temp, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE_WITH_AUX(map->dpll, + temp | DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE_WITH_AUX(map->dpll, + temp | DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Enable the pipe */ + temp = REG_READ_WITH_AUX(map->conf, i); + if ((temp & PIPEACONF_ENABLE) == 0) { + REG_WRITE_WITH_AUX(map->conf, + temp | PIPEACONF_ENABLE, i); + } + + /* Enable the plane */ + temp = REG_READ_WITH_AUX(map->cntr, i); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE_WITH_AUX(map->cntr, + temp | DISPLAY_PLANE_ENABLE, + i); + /* Flush the plane changes */ + REG_WRITE_WITH_AUX(map->base, + REG_READ_WITH_AUX(map->base, i), i); + } + + } + gma_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable + if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, true); TODO */ + break; + case DRM_MODE_DPMS_OFF: + /* Give the overlay scaler a chance to disable + * if it's on this pipe */ + /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ + + for (i = 0; i <= need_aux; i++) { + /* Disable the VGA plane that we never use */ + REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i); + /* Disable display plane */ + temp = REG_READ_WITH_AUX(map->cntr, i); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE_WITH_AUX(map->cntr, + temp & ~DISPLAY_PLANE_ENABLE, i); + /* Flush the plane changes */ + REG_WRITE_WITH_AUX(map->base, + REG_READ(map->base), i); + REG_READ_WITH_AUX(map->base, i); + } + + /* Next, disable display pipes */ + temp = REG_READ_WITH_AUX(map->conf, i); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE_WITH_AUX(map->conf, + temp & ~PIPEACONF_ENABLE, i); + REG_READ_WITH_AUX(map->conf, i); + } + /* Wait for the pipe disable to take effect. */ + gma_wait_for_vblank(dev); + + temp = REG_READ_WITH_AUX(map->dpll, i); + if ((temp & DPLL_VCO_ENABLE) != 0) { + REG_WRITE_WITH_AUX(map->dpll, + temp & ~DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + } + break; + } + + /* Set FIFO Watermarks (values taken from EMGD) */ + REG_WRITE(DSPARB, 0x3f80); + REG_WRITE(DSPFW1, 0x3f8f0404); + REG_WRITE(DSPFW2, 0x04040f04); + REG_WRITE(DSPFW3, 0x0); + REG_WRITE(DSPFW4, 0x04040404); + REG_WRITE(DSPFW5, 0x04040404); + REG_WRITE(DSPFW6, 0x78); + REG_WRITE(DSPCHICKENBIT, REG_READ(DSPCHICKENBIT) | 0xc040); + + gma_power_end(dev); +} + +/* + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int oaktrail_panel_fitter_pipe(struct drm_device *dev) +{ + u32 pfit_control; + + pfit_control = REG_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + return (pfit_control >> 29) & 3; +} + +static int oaktrail_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + int refclk = 0; + struct gma_clock_t clock; + const struct gma_limit_t *limit; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false; + bool is_lvds = false; + bool is_mipi = false; + struct gma_encoder *gma_encoder = NULL; + uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + int i; + int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0; + + if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) + return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + + if (!gma_power_begin(dev, true)) + return 0; + + drm_mode_copy(&gma_crtc->saved_mode, mode); + drm_mode_copy(&gma_crtc->saved_adjusted_mode, adjusted_mode); + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + gma_encoder = gma_attached_encoder(connector); + + switch (gma_encoder->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = true; + break; + case INTEL_OUTPUT_MIPI: + is_mipi = true; + break; + } + + break; + } + + if (gma_encoder) + drm_object_property_get_value(&connector->base, + dev->mode_config.scaling_mode_property, &scalingType); + + drm_connector_list_iter_end(&conn_iter); + + /* Disable the VGA plane that we never use */ + for (i = 0; i <= need_aux; i++) + REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i); + + /* Disable the panel fitter if it was on our pipe */ + if (oaktrail_panel_fitter_pipe(dev) == pipe) + REG_WRITE(PFIT_CONTROL, 0); + + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->src, ((mode->crtc_hdisplay - 1) << 16) | + (mode->crtc_vdisplay - 1), i); + } + + if (scalingType == DRM_MODE_SCALE_NO_SCALE) { + /* Moorestown doesn't have register support for centering so + * we need to mess with the h/vblank and h/vsync start and + * ends to get centering */ + int offsetX = 0, offsetY = 0; + + offsetX = (adjusted_mode->crtc_hdisplay - + mode->crtc_hdisplay) / 2; + offsetY = (adjusted_mode->crtc_vdisplay - + mode->crtc_vdisplay) / 2; + + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->htotal, (mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vtotal, (mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hblank, + (adjusted_mode->crtc_hblank_start - offsetX - 1) | + ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hsync, + (adjusted_mode->crtc_hsync_start - offsetX - 1) | + ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vblank, + (adjusted_mode->crtc_vblank_start - offsetY - 1) | + ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vsync, + (adjusted_mode->crtc_vsync_start - offsetY - 1) | + ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16), i); + } + } else { + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16), i); + } + } + + /* Flush the plane changes */ + { + const struct drm_crtc_helper_funcs *crtc_funcs = + crtc->helper_private; + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + } + + /* setup pipeconf */ + pipeconf = REG_READ(map->conf); + + /* Set up the display plane register */ + dspcntr = REG_READ(map->cntr); + dspcntr |= DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + if (is_mipi) + goto oaktrail_crtc_mode_set_exit; + + + dpll = 0; /*BIT16 = 0 for 100MHz reference */ + + refclk = is_sdvo ? 96000 : dev_priv->core_freq * 1000; + limit = mrst_limit(crtc, refclk); + ok = limit->find_pll(limit, crtc, adjusted_mode->clock, + refclk, &clock); + + if (is_sdvo) { + /* Convert calculated values to register values */ + clock.p1 = (1L << (clock.p1 - 1)); + clock.m -= 2; + clock.n = (1L << (clock.n - 1)); + } + + if (!ok) + DRM_ERROR("Failed to find proper PLL settings"); + + mrst_print_pll(&clock); + + if (is_sdvo) + fp = clock.n << 16 | clock.m; + else + fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8; + + dpll |= DPLL_VGA_MODE_DIS; + + + dpll |= DPLL_VCO_ENABLE; + + if (is_lvds) + dpll |= DPLLA_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + + if (is_sdvo) { + int sdvo_pixel_multiply = + adjusted_mode->clock / mode->clock; + + dpll |= DPLL_DVO_HIGH_SPEED; + dpll |= + (sdvo_pixel_multiply - + 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + + + /* compute bitmask from p1 value */ + if (is_sdvo) + dpll |= clock.p1 << 16; // dpll |= (1 << (clock.p1 - 1)) << 16; + else + dpll |= (1 << (clock.p1 - 2)) << 17; + + dpll |= DPLL_VCO_ENABLE; + + if (dpll & DPLL_VCO_ENABLE) { + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->fp0, fp, i); + REG_WRITE_WITH_AUX(map->dpll, dpll & ~DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Check the DPLLA lock bit PIPEACONF[29] */ + udelay(150); + } + } + + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->fp0, fp, i); + REG_WRITE_WITH_AUX(map->dpll, dpll, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + + /* write it again -- the BIOS does, after all */ + REG_WRITE_WITH_AUX(map->dpll, dpll, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + + REG_WRITE_WITH_AUX(map->conf, pipeconf, i); + REG_READ_WITH_AUX(map->conf, i); + gma_wait_for_vblank(dev); + + REG_WRITE_WITH_AUX(map->cntr, dspcntr, i); + gma_wait_for_vblank(dev); + } + +oaktrail_crtc_mode_set_exit: + gma_power_end(dev); + return 0; +} + +static int oaktrail_pipe_set_base(struct drm_crtc *crtc, + int x, int y, struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct drm_framebuffer *fb = crtc->primary->fb; + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + unsigned long start, offset; + + u32 dspcntr; + int ret = 0; + + /* no fb bound */ + if (!fb) { + dev_dbg(dev->dev, "No FB bound\n"); + return 0; + } + + if (!gma_power_begin(dev, true)) + return 0; + + start = to_psb_gem_object(fb->obj[0])->offset; + offset = y * fb->pitches[0] + x * fb->format->cpp[0]; + + REG_WRITE(map->stride, fb->pitches[0]); + + dspcntr = REG_READ(map->cntr); + dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; + + switch (fb->format->cpp[0] * 8) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (fb->format->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + dev_err(dev->dev, "Unknown color depth\n"); + ret = -EINVAL; + goto pipe_set_base_exit; + } + REG_WRITE(map->cntr, dspcntr); + + REG_WRITE(map->base, offset); + REG_READ(map->base); + REG_WRITE(map->surf, start); + REG_READ(map->surf); + +pipe_set_base_exit: + gma_power_end(dev); + return ret; +} + +const struct drm_crtc_helper_funcs oaktrail_helper_funcs = { + .dpms = oaktrail_crtc_dpms, + .mode_set = oaktrail_crtc_mode_set, + .mode_set_base = oaktrail_pipe_set_base, + .prepare = gma_crtc_prepare, + .commit = gma_crtc_commit, +}; + +/* Not used yet */ +const struct gma_clock_funcs mrst_clock_funcs = { + .clock = mrst_lvds_clock, + .limit = mrst_limit, + .pll_is_valid = gma_pll_is_valid, +}; diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c new file mode 100644 index 000000000..2531959d3 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_device.c @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/module.h> + +#include <drm/drm.h> + +#include "intel_bios.h" +#include "mid_bios.h" +#include "psb_drv.h" +#include "psb_intel_reg.h" +#include "psb_reg.h" + +static int oaktrail_output_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + if (dev_priv->iLVDS_enable) + oaktrail_lvds_init(dev, &dev_priv->mode_dev); + else + dev_err(dev->dev, "DSI is not supported\n"); + if (dev_priv->hdmi_priv) + oaktrail_hdmi_init(dev, &dev_priv->mode_dev); + + psb_intel_sdvo_init(dev, SDVOB); + + return 0; +} + +/* + * Provide the low level interfaces for the Moorestown backlight + */ + +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ +#define BLC_PWM_FREQ_CALC_CONSTANT 32 +#define MHz 1000000 +#define BLC_ADJUSTMENT_MAX 100 + +static void oaktrail_set_brightness(struct drm_device *dev, int level) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 blc_pwm_ctl; + u32 max_pwm_blc; + + if (gma_power_begin(dev, 0)) { + /* Calculate and set the brightness value */ + max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16; + blc_pwm_ctl = level * max_pwm_blc / 100; + + /* Adjust the backlight level with the percent in + * dev_priv->blc_adj1; + */ + blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1; + blc_pwm_ctl = blc_pwm_ctl / 100; + + /* Adjust the backlight level with the percent in + * dev_priv->blc_adj2; + */ + blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2; + blc_pwm_ctl = blc_pwm_ctl / 100; + + /* force PWM bit on */ + REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); + REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl); + gma_power_end(dev); + } +} + +static int oaktrail_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned long core_clock; + u16 bl_max_freq; + uint32_t value; + uint32_t blc_pwm_precision_factor; + + dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; + dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; + bl_max_freq = 256; + /* this needs to be set elsewhere */ + blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR; + + core_clock = dev_priv->core_freq; + + value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; + value *= blc_pwm_precision_factor; + value /= bl_max_freq; + value /= blc_pwm_precision_factor; + + if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ) + return -ERANGE; + + if (gma_power_begin(dev, false)) { + REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2))); + REG_WRITE(BLC_PWM_CTL, value | (value << 16)); + gma_power_end(dev); + } + + oaktrail_set_brightness(dev, PSB_MAX_BRIGHTNESS); + return 0; +} + +/* + * Provide the Moorestown specific chip logic and low level methods + * for power management + */ + +/** + * oaktrail_save_display_registers - save registers lost on suspend + * @dev: our DRM device + * + * Save the state we need in order to be able to restore the interface + * upon resume from suspend + */ +static int oaktrail_save_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_save_area *regs = &dev_priv->regs; + struct psb_pipe *p = ®s->pipe[0]; + int i; + u32 pp_stat; + + /* Display arbitration control + watermarks */ + regs->psb.saveDSPARB = PSB_RVDC32(DSPARB); + regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1); + regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2); + regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3); + regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4); + regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5); + regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6); + regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); + + /* Pipe & plane A info */ + p->conf = PSB_RVDC32(PIPEACONF); + p->src = PSB_RVDC32(PIPEASRC); + p->fp0 = PSB_RVDC32(MRST_FPA0); + p->fp1 = PSB_RVDC32(MRST_FPA1); + p->dpll = PSB_RVDC32(MRST_DPLL_A); + p->htotal = PSB_RVDC32(HTOTAL_A); + p->hblank = PSB_RVDC32(HBLANK_A); + p->hsync = PSB_RVDC32(HSYNC_A); + p->vtotal = PSB_RVDC32(VTOTAL_A); + p->vblank = PSB_RVDC32(VBLANK_A); + p->vsync = PSB_RVDC32(VSYNC_A); + regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A); + p->cntr = PSB_RVDC32(DSPACNTR); + p->stride = PSB_RVDC32(DSPASTRIDE); + p->addr = PSB_RVDC32(DSPABASE); + p->surf = PSB_RVDC32(DSPASURF); + p->linoff = PSB_RVDC32(DSPALINOFF); + p->tileoff = PSB_RVDC32(DSPATILEOFF); + + /* Save cursor regs */ + regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR); + regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE); + regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS); + + /* Save palette (gamma) */ + for (i = 0; i < 256; i++) + p->palette[i] = PSB_RVDC32(PALETTE_A + (i << 2)); + + if (dev_priv->hdmi_priv) + oaktrail_hdmi_save(dev); + + /* Save performance state */ + regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE); + + /* LVDS state */ + regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL); + regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); + regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS); + regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL); + regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2); + regs->psb.saveLVDS = PSB_RVDC32(LVDS); + regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); + regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON); + regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF); + regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE); + + /* HW overlay */ + regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD); + regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0); + regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1); + regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2); + regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3); + regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4); + regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5); + + /* DPST registers */ + regs->psb.saveHISTOGRAM_INT_CONTROL_REG = + PSB_RVDC32(HISTOGRAM_INT_CONTROL); + regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG = + PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL); + regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC); + + if (dev_priv->iLVDS_enable) { + /* Shut down the panel */ + PSB_WVDC32(0, PP_CONTROL); + + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x80000000); + + /* Turn off the plane */ + PSB_WVDC32(0x58000000, DSPACNTR); + /* Trigger the plane disable */ + PSB_WVDC32(0, DSPASURF); + + /* Wait ~4 ticks */ + msleep(4); + + /* Turn off pipe */ + PSB_WVDC32(0x0, PIPEACONF); + /* Wait ~8 ticks */ + msleep(8); + + /* Turn off PLLs */ + PSB_WVDC32(0, MRST_DPLL_A); + } + return 0; +} + +/** + * oaktrail_restore_display_registers - restore lost register state + * @dev: our DRM device + * + * Restore register state that was lost during suspend and resume. + */ +static int oaktrail_restore_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_save_area *regs = &dev_priv->regs; + struct psb_pipe *p = ®s->pipe[0]; + u32 pp_stat; + int i; + + /* Display arbitration + watermarks */ + PSB_WVDC32(regs->psb.saveDSPARB, DSPARB); + PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1); + PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2); + PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3); + PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4); + PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5); + PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6); + PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT); + + /* Make sure VGA plane is off. it initializes to on after reset!*/ + PSB_WVDC32(0x80000000, VGACNTRL); + + /* set the plls */ + PSB_WVDC32(p->fp0, MRST_FPA0); + PSB_WVDC32(p->fp1, MRST_FPA1); + + /* Actually enable it */ + PSB_WVDC32(p->dpll, MRST_DPLL_A); + udelay(150); + + /* Restore mode */ + PSB_WVDC32(p->htotal, HTOTAL_A); + PSB_WVDC32(p->hblank, HBLANK_A); + PSB_WVDC32(p->hsync, HSYNC_A); + PSB_WVDC32(p->vtotal, VTOTAL_A); + PSB_WVDC32(p->vblank, VBLANK_A); + PSB_WVDC32(p->vsync, VSYNC_A); + PSB_WVDC32(p->src, PIPEASRC); + PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A); + + /* Restore performance mode*/ + PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE); + + /* Enable the pipe*/ + if (dev_priv->iLVDS_enable) + PSB_WVDC32(p->conf, PIPEACONF); + + /* Set up the plane*/ + PSB_WVDC32(p->linoff, DSPALINOFF); + PSB_WVDC32(p->stride, DSPASTRIDE); + PSB_WVDC32(p->tileoff, DSPATILEOFF); + + /* Enable the plane */ + PSB_WVDC32(p->cntr, DSPACNTR); + PSB_WVDC32(p->surf, DSPASURF); + + /* Enable Cursor A */ + PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR); + PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS); + PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE); + + /* Restore palette (gamma) */ + for (i = 0; i < 256; i++) + PSB_WVDC32(p->palette[i], PALETTE_A + (i << 2)); + + if (dev_priv->hdmi_priv) + oaktrail_hdmi_restore(dev); + + if (dev_priv->iLVDS_enable) { + PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2); + PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/ + PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL); + PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); + PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS); + PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL); + PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON); + PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF); + PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE); + PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL); + } + + /* Wait for cycle delay */ + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x08000000); + + /* Wait for panel power up */ + do { + pp_stat = PSB_RVDC32(PP_STATUS); + } while (pp_stat & 0x10000000); + + /* Restore HW overlay */ + PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD); + PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0); + PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1); + PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2); + PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3); + PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4); + PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5); + + /* DPST registers */ + PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG, + HISTOGRAM_INT_CONTROL); + PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG, + HISTOGRAM_LOGIC_CONTROL); + PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC); + + return 0; +} + +/** + * oaktrail_power_down - power down the display island + * @dev: our DRM device + * + * Power down the display interface of our device + */ +static int oaktrail_power_down(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 pwr_mask ; + u32 pwr_sts; + + pwr_mask = PSB_PWRGT_DISPLAY_MASK; + outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC); + + while (true) { + pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); + if ((pwr_sts & pwr_mask) == pwr_mask) + break; + else + udelay(10); + } + return 0; +} + +/* + * oaktrail_power_up + * + * Restore power to the specified island(s) (powergating) + */ +static int oaktrail_power_up(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK; + u32 pwr_sts, pwr_cnt; + + pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC); + pwr_cnt &= ~pwr_mask; + outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC)); + + while (true) { + pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS); + if ((pwr_sts & pwr_mask) == 0) + break; + else + udelay(10); + } + return 0; +} + +/* Oaktrail */ +static const struct psb_offset oaktrail_regmap[2] = { + { + .fp0 = MRST_FPA0, + .fp1 = MRST_FPA1, + .cntr = DSPACNTR, + .conf = PIPEACONF, + .src = PIPEASRC, + .dpll = MRST_DPLL_A, + .htotal = HTOTAL_A, + .hblank = HBLANK_A, + .hsync = HSYNC_A, + .vtotal = VTOTAL_A, + .vblank = VBLANK_A, + .vsync = VSYNC_A, + .stride = DSPASTRIDE, + .size = DSPASIZE, + .pos = DSPAPOS, + .surf = DSPASURF, + .addr = MRST_DSPABASE, + .base = MRST_DSPABASE, + .status = PIPEASTAT, + .linoff = DSPALINOFF, + .tileoff = DSPATILEOFF, + .palette = PALETTE_A, + }, + { + .fp0 = FPB0, + .fp1 = FPB1, + .cntr = DSPBCNTR, + .conf = PIPEBCONF, + .src = PIPEBSRC, + .dpll = DPLL_B, + .htotal = HTOTAL_B, + .hblank = HBLANK_B, + .hsync = HSYNC_B, + .vtotal = VTOTAL_B, + .vblank = VBLANK_B, + .vsync = VSYNC_B, + .stride = DSPBSTRIDE, + .size = DSPBSIZE, + .pos = DSPBPOS, + .surf = DSPBSURF, + .addr = DSPBBASE, + .base = DSPBBASE, + .status = PIPEBSTAT, + .linoff = DSPBLINOFF, + .tileoff = DSPBTILEOFF, + .palette = PALETTE_B, + }, +}; + +static int oaktrail_chip_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int ret; + + dev_priv->use_msi = true; + dev_priv->regmap = oaktrail_regmap; + + ret = mid_chip_setup(dev); + if (ret < 0) + return ret; + if (!dev_priv->has_gct) { + /* Now pull the BIOS data */ + psb_intel_opregion_init(dev); + psb_intel_init_bios(dev); + } + gma_intel_setup_gmbus(dev); + oaktrail_hdmi_setup(dev); + return 0; +} + +static void oaktrail_teardown(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + gma_intel_teardown_gmbus(dev); + oaktrail_hdmi_teardown(dev); + if (!dev_priv->has_gct) + psb_intel_destroy_bios(dev); +} + +const struct psb_ops oaktrail_chip_ops = { + .name = "Oaktrail", + .pipes = 2, + .crtcs = 2, + .hdmi_mask = (1 << 1), + .lvds_mask = (1 << 0), + .sdvo_mask = (1 << 1), + .cursor_needs_phys = 0, + .sgx_offset = MRST_SGX_OFFSET, + + .chip_setup = oaktrail_chip_setup, + .chip_teardown = oaktrail_teardown, + .crtc_helper = &oaktrail_helper_funcs, + + .output_init = oaktrail_output_init, + + .backlight_init = oaktrail_backlight_init, + .backlight_set = oaktrail_set_brightness, + .backlight_name = "oaktrail-bl", + + .save_regs = oaktrail_save_display_registers, + .restore_regs = oaktrail_restore_display_registers, + .save_crtc = gma_crtc_save, + .restore_crtc = gma_crtc_restore, + .power_down = oaktrail_power_down, + .power_up = oaktrail_power_up, + + .i2c_bus = 1, +}; diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c new file mode 100644 index 000000000..95b7cb099 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c @@ -0,0 +1,840 @@ +/* + * Copyright © 2010 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Li Peng <peng.li@intel.com> + */ + +#include <linux/delay.h> + +#include <drm/drm.h> +#include <drm/drm_edid.h> +#include <drm/drm_simple_kms_helper.h> + +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg)) +#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg)) + +#define HDMI_HCR 0x1000 +#define HCR_ENABLE_HDCP (1 << 5) +#define HCR_ENABLE_AUDIO (1 << 2) +#define HCR_ENABLE_PIXEL (1 << 1) +#define HCR_ENABLE_TMDS (1 << 0) + +#define HDMI_HICR 0x1004 +#define HDMI_HSR 0x1008 +#define HDMI_HISR 0x100C +#define HDMI_DETECT_HDP (1 << 0) + +#define HDMI_VIDEO_REG 0x3000 +#define HDMI_UNIT_EN (1 << 7) +#define HDMI_MODE_OUTPUT (1 << 0) +#define HDMI_HBLANK_A 0x3100 + +#define HDMI_AUDIO_CTRL 0x4000 +#define HDMI_ENABLE_AUDIO (1 << 0) + +#define PCH_HTOTAL_B 0x3100 +#define PCH_HBLANK_B 0x3104 +#define PCH_HSYNC_B 0x3108 +#define PCH_VTOTAL_B 0x310C +#define PCH_VBLANK_B 0x3110 +#define PCH_VSYNC_B 0x3114 +#define PCH_PIPEBSRC 0x311C + +#define PCH_PIPEB_DSL 0x3800 +#define PCH_PIPEB_SLC 0x3804 +#define PCH_PIPEBCONF 0x3808 +#define PCH_PIPEBSTAT 0x3824 + +#define CDVO_DFT 0x5000 +#define CDVO_SLEWRATE 0x5004 +#define CDVO_STRENGTH 0x5008 +#define CDVO_RCOMP 0x500C + +#define DPLL_CTRL 0x6000 +#define DPLL_PDIV_SHIFT 16 +#define DPLL_PDIV_MASK (0xf << 16) +#define DPLL_PWRDN (1 << 4) +#define DPLL_RESET (1 << 3) +#define DPLL_FASTEN (1 << 2) +#define DPLL_ENSTAT (1 << 1) +#define DPLL_DITHEN (1 << 0) + +#define DPLL_DIV_CTRL 0x6004 +#define DPLL_CLKF_MASK 0xffffffc0 +#define DPLL_CLKR_MASK (0x3f) + +#define DPLL_CLK_ENABLE 0x6008 +#define DPLL_EN_DISP (1 << 31) +#define DPLL_SEL_HDMI (1 << 8) +#define DPLL_EN_HDMI (1 << 1) +#define DPLL_EN_VGA (1 << 0) + +#define DPLL_ADJUST 0x600C +#define DPLL_STATUS 0x6010 +#define DPLL_UPDATE 0x6014 +#define DPLL_DFT 0x6020 + +struct intel_range { + int min, max; +}; + +struct oaktrail_hdmi_limit { + struct intel_range vco, np, nr, nf; +}; + +struct oaktrail_hdmi_clock { + int np; + int nr; + int nf; + int dot; +}; + +#define VCO_MIN 320000 +#define VCO_MAX 1650000 +#define NP_MIN 1 +#define NP_MAX 15 +#define NR_MIN 1 +#define NR_MAX 64 +#define NF_MIN 2 +#define NF_MAX 4095 + +static const struct oaktrail_hdmi_limit oaktrail_hdmi_limit = { + .vco = { .min = VCO_MIN, .max = VCO_MAX }, + .np = { .min = NP_MIN, .max = NP_MAX }, + .nr = { .min = NR_MIN, .max = NR_MAX }, + .nf = { .min = NF_MIN, .max = NF_MAX }, +}; + +static void oaktrail_hdmi_audio_enable(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + + HDMI_WRITE(HDMI_HCR, 0x67); + HDMI_READ(HDMI_HCR); + + HDMI_WRITE(0x51a8, 0x10); + HDMI_READ(0x51a8); + + HDMI_WRITE(HDMI_AUDIO_CTRL, 0x1); + HDMI_READ(HDMI_AUDIO_CTRL); +} + +static void oaktrail_hdmi_audio_disable(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + + HDMI_WRITE(0x51a8, 0x0); + HDMI_READ(0x51a8); + + HDMI_WRITE(HDMI_AUDIO_CTRL, 0x0); + HDMI_READ(HDMI_AUDIO_CTRL); + + HDMI_WRITE(HDMI_HCR, 0x47); + HDMI_READ(HDMI_HCR); +} + +static unsigned int htotal_calculate(struct drm_display_mode *mode) +{ + u32 new_crtc_htotal; + + /* + * 1024 x 768 new_crtc_htotal = 0x1024; + * 1280 x 1024 new_crtc_htotal = 0x0c34; + */ + new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock; + + DRM_DEBUG_KMS("new crtc htotal 0x%4x\n", new_crtc_htotal); + return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16); +} + +static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target, + int refclk, struct oaktrail_hdmi_clock *best_clock) +{ + int np_min, np_max, nr_min, nr_max; + int np, nr, nf; + + np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10); + np_max = oaktrail_hdmi_limit.vco.max / (target * 10); + if (np_min < oaktrail_hdmi_limit.np.min) + np_min = oaktrail_hdmi_limit.np.min; + if (np_max > oaktrail_hdmi_limit.np.max) + np_max = oaktrail_hdmi_limit.np.max; + + nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max)); + nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min)); + if (nr_min < oaktrail_hdmi_limit.nr.min) + nr_min = oaktrail_hdmi_limit.nr.min; + if (nr_max > oaktrail_hdmi_limit.nr.max) + nr_max = oaktrail_hdmi_limit.nr.max; + + np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max)); + nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np)); + nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk); + DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf); + + /* + * 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000; + * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000; + */ + best_clock->np = np; + best_clock->nr = nr - 1; + best_clock->nf = (nf << 14); +} + +static void scu_busy_loop(void __iomem *scu_base) +{ + u32 status = 0; + u32 loop_count = 0; + + status = readl(scu_base + 0x04); + while (status & 1) { + udelay(1); /* scu processing time is in few u secods */ + status = readl(scu_base + 0x04); + loop_count++; + /* break if scu doesn't reset busy bit after huge retry */ + if (loop_count > 1000) { + DRM_DEBUG_KMS("SCU IPC timed out"); + return; + } + } +} + +/* + * You don't want to know, you really really don't want to know.... + * + * This is magic. However it's safe magic because of the way the platform + * works and it is necessary magic. + */ +static void oaktrail_hdmi_reset(struct drm_device *dev) +{ + void __iomem *base; + unsigned long scu_ipc_mmio = 0xff11c000UL; + int scu_len = 1024; + + base = ioremap((resource_size_t)scu_ipc_mmio, scu_len); + if (base == NULL) { + DRM_ERROR("failed to map scu mmio\n"); + return; + } + + /* scu ipc: assert hdmi controller reset */ + writel(0xff11d118, base + 0x0c); + writel(0x7fffffdf, base + 0x80); + writel(0x42005, base + 0x0); + scu_busy_loop(base); + + /* scu ipc: de-assert hdmi controller reset */ + writel(0xff11d118, base + 0x0c); + writel(0x7fffffff, base + 0x80); + writel(0x42005, base + 0x0); + scu_busy_loop(base); + + iounmap(base); +} + +int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + int pipe = 1; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; + int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int refclk; + struct oaktrail_hdmi_clock clock; + u32 dspcntr, pipeconf, dpll, temp; + int dspcntr_reg = DSPBCNTR; + + if (!gma_power_begin(dev, true)) + return 0; + + /* Disable the VGA plane that we never use */ + REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Disable dpll if necessary */ + dpll = REG_READ(DPLL_CTRL); + if ((dpll & DPLL_PWRDN) == 0) { + REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET)); + REG_WRITE(DPLL_DIV_CTRL, 0x00000000); + REG_WRITE(DPLL_STATUS, 0x1); + } + udelay(150); + + /* Reset controller */ + oaktrail_hdmi_reset(dev); + + /* program and enable dpll */ + refclk = 25000; + oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock); + + /* Set the DPLL */ + dpll = REG_READ(DPLL_CTRL); + dpll &= ~DPLL_PDIV_MASK; + dpll &= ~(DPLL_PWRDN | DPLL_RESET); + REG_WRITE(DPLL_CTRL, 0x00000008); + REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr)); + REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1)); + REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN)); + REG_WRITE(DPLL_UPDATE, 0x80000000); + REG_WRITE(DPLL_CLK_ENABLE, 0x80050102); + udelay(150); + + /* configure HDMI */ + HDMI_WRITE(0x1004, 0x1fd); + HDMI_WRITE(0x2000, 0x1); + HDMI_WRITE(0x2008, 0x0); + HDMI_WRITE(0x3130, 0x8); + HDMI_WRITE(0x101c, 0x1800810); + + temp = htotal_calculate(adjusted_mode); + REG_WRITE(htot_reg, temp); + REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); + REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); + + REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); + REG_WRITE(PCH_PIPEBSRC, ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); + + temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; + HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp); + + REG_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + REG_WRITE(dsppos_reg, 0); + + /* Flush the plane changes */ + { + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + } + + /* Set up the display plane register */ + dspcntr = REG_READ(dspcntr_reg); + dspcntr |= DISPPLANE_GAMMA_ENABLE; + dspcntr |= DISPPLANE_SEL_PIPE_B; + dspcntr |= DISPLAY_PLANE_ENABLE; + + /* setup pipeconf */ + pipeconf = REG_READ(pipeconf_reg); + pipeconf |= PIPEACONF_ENABLE; + + REG_WRITE(pipeconf_reg, pipeconf); + REG_READ(pipeconf_reg); + + REG_WRITE(PCH_PIPEBCONF, pipeconf); + REG_READ(PCH_PIPEBCONF); + gma_wait_for_vblank(dev); + + REG_WRITE(dspcntr_reg, dspcntr); + gma_wait_for_vblank(dev); + + gma_power_end(dev); + + return 0; +} + +void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + u32 temp; + + DRM_DEBUG_KMS("%s %d\n", __func__, mode); + + switch (mode) { + case DRM_MODE_DPMS_OFF: + REG_WRITE(VGACNTRL, 0x80000000); + + /* Disable plane */ + temp = REG_READ(DSPBCNTR); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE); + REG_READ(DSPBCNTR); + /* Flush the plane changes */ + REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); + REG_READ(DSPBSURF); + } + + /* Disable pipe B */ + temp = REG_READ(PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE); + REG_READ(PIPEBCONF); + } + + /* Disable LNW Pipes, etc */ + temp = REG_READ(PCH_PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE); + REG_READ(PCH_PIPEBCONF); + } + + /* wait for pipe off */ + udelay(150); + + /* Disable dpll */ + temp = REG_READ(DPLL_CTRL); + if ((temp & DPLL_PWRDN) == 0) { + REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET)); + REG_WRITE(DPLL_STATUS, 0x1); + } + + /* wait for dpll off */ + udelay(150); + + break; + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + /* Enable dpll */ + temp = REG_READ(DPLL_CTRL); + if ((temp & DPLL_PWRDN) != 0) { + REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET)); + temp = REG_READ(DPLL_CLK_ENABLE); + REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI); + REG_READ(DPLL_CLK_ENABLE); + } + /* wait for dpll warm up */ + udelay(150); + + /* Enable pipe B */ + temp = REG_READ(PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) == 0) { + REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE); + REG_READ(PIPEBCONF); + } + + /* Enable LNW Pipe B */ + temp = REG_READ(PCH_PIPEBCONF); + if ((temp & PIPEACONF_ENABLE) == 0) { + REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE); + REG_READ(PCH_PIPEBCONF); + } + + gma_wait_for_vblank(dev); + + /* Enable plane */ + temp = REG_READ(DSPBCNTR); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); + REG_READ(DSPBSURF); + } + + gma_crtc_load_lut(crtc); + } + + /* DSPARB */ + REG_WRITE(DSPARB, 0x00003fbf); + + /* FW1 */ + REG_WRITE(0x70034, 0x3f880a0a); + + /* FW2 */ + REG_WRITE(0x70038, 0x0b060808); + + /* FW4 */ + REG_WRITE(0x70050, 0x08030404); + + /* FW5 */ + REG_WRITE(0x70054, 0x04040404); + + /* LNC Chicken Bits - Squawk! */ + REG_WRITE(0x70400, 0x4000); + + return; +} + +static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode) +{ + static int dpms_mode = -1; + + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + u32 temp; + + if (dpms_mode == mode) + return; + + if (mode != DRM_MODE_DPMS_ON) + temp = 0x0; + else + temp = 0x99; + + dpms_mode = mode; + HDMI_WRITE(HDMI_VIDEO_REG, temp); +} + +static enum drm_mode_status oaktrail_hdmi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + if (mode->clock < 20000) + return MODE_CLOCK_LOW; + + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + return MODE_OK; +} + +static enum drm_connector_status +oaktrail_hdmi_detect(struct drm_connector *connector, bool force) +{ + enum drm_connector_status status; + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + u32 temp; + + temp = HDMI_READ(HDMI_HSR); + DRM_DEBUG_KMS("HDMI_HSR %x\n", temp); + + if ((temp & HDMI_DETECT_HDP) != 0) + status = connector_status_connected; + else + status = connector_status_disconnected; + + return status; +} + +static const unsigned char raw_edid[] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x10, 0xac, 0x2f, 0xa0, + 0x53, 0x55, 0x33, 0x30, 0x16, 0x13, 0x01, 0x03, 0x0e, 0x3a, 0x24, 0x78, + 0xea, 0xe9, 0xf5, 0xac, 0x51, 0x30, 0xb4, 0x25, 0x11, 0x50, 0x54, 0xa5, + 0x4b, 0x00, 0x81, 0x80, 0xa9, 0x40, 0x71, 0x4f, 0xb3, 0x00, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x28, 0x3c, 0x80, 0xa0, 0x70, 0xb0, + 0x23, 0x40, 0x30, 0x20, 0x36, 0x00, 0x46, 0x6c, 0x21, 0x00, 0x00, 0x1a, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x47, 0x4e, 0x37, 0x32, 0x31, 0x39, 0x35, + 0x52, 0x30, 0x33, 0x55, 0x53, 0x0a, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x44, + 0x45, 0x4c, 0x4c, 0x20, 0x32, 0x37, 0x30, 0x39, 0x57, 0x0a, 0x20, 0x20, + 0x00, 0x00, 0x00, 0xfd, 0x00, 0x38, 0x4c, 0x1e, 0x53, 0x11, 0x00, 0x0a, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x8d +}; + +static int oaktrail_hdmi_get_modes(struct drm_connector *connector) +{ + struct i2c_adapter *i2c_adap; + struct edid *edid; + int ret = 0; + + /* + * FIXME: We need to figure this lot out. In theory we can + * read the EDID somehow but I've yet to find working reference + * code. + */ + i2c_adap = i2c_get_adapter(3); + if (i2c_adap == NULL) { + DRM_ERROR("No ddc adapter available!\n"); + edid = (struct edid *)raw_edid; + } else { + edid = (struct edid *)raw_edid; + /* FIXME ? edid = drm_get_edid(connector, i2c_adap); */ + } + + if (edid) { + drm_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + } + return ret; +} + +static void oaktrail_hdmi_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + + oaktrail_hdmi_audio_enable(dev); + return; +} + +static void oaktrail_hdmi_destroy(struct drm_connector *connector) +{ + return; +} + +static const struct drm_encoder_helper_funcs oaktrail_hdmi_helper_funcs = { + .dpms = oaktrail_hdmi_dpms, + .prepare = gma_encoder_prepare, + .mode_set = oaktrail_hdmi_mode_set, + .commit = gma_encoder_commit, +}; + +static const struct drm_connector_helper_funcs + oaktrail_hdmi_connector_helper_funcs = { + .get_modes = oaktrail_hdmi_get_modes, + .mode_valid = oaktrail_hdmi_mode_valid, + .best_encoder = gma_best_encoder, +}; + +static const struct drm_connector_funcs oaktrail_hdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = oaktrail_hdmi_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = oaktrail_hdmi_destroy, +}; + +void oaktrail_hdmi_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct gma_encoder *gma_encoder; + struct gma_connector *gma_connector; + struct drm_connector *connector; + struct drm_encoder *encoder; + + gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); + if (!gma_encoder) + return; + + gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); + if (!gma_connector) + goto failed_connector; + + connector = &gma_connector->base; + encoder = &gma_encoder->base; + drm_connector_init(dev, connector, + &oaktrail_hdmi_connector_funcs, + DRM_MODE_CONNECTOR_DVID); + + drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS); + + gma_connector_attach_encoder(gma_connector, gma_encoder); + + gma_encoder->type = INTEL_OUTPUT_HDMI; + drm_encoder_helper_add(encoder, &oaktrail_hdmi_helper_funcs); + drm_connector_helper_add(connector, &oaktrail_hdmi_connector_helper_funcs); + + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + dev_info(dev->dev, "HDMI initialised.\n"); + + return; + +failed_connector: + kfree(gma_encoder); +} + +void oaktrail_hdmi_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev; + struct oaktrail_hdmi_dev *hdmi_dev; + int ret; + + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x080d, NULL); + if (!pdev) + return; + + hdmi_dev = kzalloc(sizeof(struct oaktrail_hdmi_dev), GFP_KERNEL); + if (!hdmi_dev) { + dev_err(dev->dev, "failed to allocate memory\n"); + goto out; + } + + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(dev->dev, "failed to enable hdmi controller\n"); + goto free; + } + + hdmi_dev->mmio = pci_resource_start(pdev, 0); + hdmi_dev->mmio_len = pci_resource_len(pdev, 0); + hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len); + if (!hdmi_dev->regs) { + dev_err(dev->dev, "failed to map hdmi mmio\n"); + goto free; + } + + hdmi_dev->dev = pdev; + pci_set_drvdata(pdev, hdmi_dev); + + /* Initialize i2c controller */ + ret = oaktrail_hdmi_i2c_init(hdmi_dev->dev); + if (ret) + dev_err(dev->dev, "HDMI I2C initialization failed\n"); + + dev_priv->hdmi_priv = hdmi_dev; + oaktrail_hdmi_audio_disable(dev); + + dev_info(dev->dev, "HDMI hardware present.\n"); + + return; + +free: + kfree(hdmi_dev); +out: + return; +} + +void oaktrail_hdmi_teardown(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + struct pci_dev *pdev; + + if (hdmi_dev) { + pdev = hdmi_dev->dev; + pci_set_drvdata(pdev, NULL); + oaktrail_hdmi_i2c_exit(pdev); + iounmap(hdmi_dev->regs); + kfree(hdmi_dev); + pci_dev_put(pdev); + } +} + +/* save HDMI register state */ +void oaktrail_hdmi_save(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + struct psb_state *regs = &dev_priv->regs.psb; + struct psb_pipe *pipeb = &dev_priv->regs.pipe[1]; + int i; + + /* dpll */ + hdmi_dev->saveDPLL_CTRL = PSB_RVDC32(DPLL_CTRL); + hdmi_dev->saveDPLL_DIV_CTRL = PSB_RVDC32(DPLL_DIV_CTRL); + hdmi_dev->saveDPLL_ADJUST = PSB_RVDC32(DPLL_ADJUST); + hdmi_dev->saveDPLL_UPDATE = PSB_RVDC32(DPLL_UPDATE); + hdmi_dev->saveDPLL_CLK_ENABLE = PSB_RVDC32(DPLL_CLK_ENABLE); + + /* pipe B */ + pipeb->conf = PSB_RVDC32(PIPEBCONF); + pipeb->src = PSB_RVDC32(PIPEBSRC); + pipeb->htotal = PSB_RVDC32(HTOTAL_B); + pipeb->hblank = PSB_RVDC32(HBLANK_B); + pipeb->hsync = PSB_RVDC32(HSYNC_B); + pipeb->vtotal = PSB_RVDC32(VTOTAL_B); + pipeb->vblank = PSB_RVDC32(VBLANK_B); + pipeb->vsync = PSB_RVDC32(VSYNC_B); + + hdmi_dev->savePCH_PIPEBCONF = PSB_RVDC32(PCH_PIPEBCONF); + hdmi_dev->savePCH_PIPEBSRC = PSB_RVDC32(PCH_PIPEBSRC); + hdmi_dev->savePCH_HTOTAL_B = PSB_RVDC32(PCH_HTOTAL_B); + hdmi_dev->savePCH_HBLANK_B = PSB_RVDC32(PCH_HBLANK_B); + hdmi_dev->savePCH_HSYNC_B = PSB_RVDC32(PCH_HSYNC_B); + hdmi_dev->savePCH_VTOTAL_B = PSB_RVDC32(PCH_VTOTAL_B); + hdmi_dev->savePCH_VBLANK_B = PSB_RVDC32(PCH_VBLANK_B); + hdmi_dev->savePCH_VSYNC_B = PSB_RVDC32(PCH_VSYNC_B); + + /* plane */ + pipeb->cntr = PSB_RVDC32(DSPBCNTR); + pipeb->stride = PSB_RVDC32(DSPBSTRIDE); + pipeb->addr = PSB_RVDC32(DSPBBASE); + pipeb->surf = PSB_RVDC32(DSPBSURF); + pipeb->linoff = PSB_RVDC32(DSPBLINOFF); + pipeb->tileoff = PSB_RVDC32(DSPBTILEOFF); + + /* cursor B */ + regs->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR); + regs->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE); + regs->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS); + + /* save palette */ + for (i = 0; i < 256; i++) + pipeb->palette[i] = PSB_RVDC32(PALETTE_B + (i << 2)); +} + +/* restore HDMI register state */ +void oaktrail_hdmi_restore(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; + struct psb_state *regs = &dev_priv->regs.psb; + struct psb_pipe *pipeb = &dev_priv->regs.pipe[1]; + int i; + + /* dpll */ + PSB_WVDC32(hdmi_dev->saveDPLL_CTRL, DPLL_CTRL); + PSB_WVDC32(hdmi_dev->saveDPLL_DIV_CTRL, DPLL_DIV_CTRL); + PSB_WVDC32(hdmi_dev->saveDPLL_ADJUST, DPLL_ADJUST); + PSB_WVDC32(hdmi_dev->saveDPLL_UPDATE, DPLL_UPDATE); + PSB_WVDC32(hdmi_dev->saveDPLL_CLK_ENABLE, DPLL_CLK_ENABLE); + udelay(150); + + /* pipe */ + PSB_WVDC32(pipeb->src, PIPEBSRC); + PSB_WVDC32(pipeb->htotal, HTOTAL_B); + PSB_WVDC32(pipeb->hblank, HBLANK_B); + PSB_WVDC32(pipeb->hsync, HSYNC_B); + PSB_WVDC32(pipeb->vtotal, VTOTAL_B); + PSB_WVDC32(pipeb->vblank, VBLANK_B); + PSB_WVDC32(pipeb->vsync, VSYNC_B); + + PSB_WVDC32(hdmi_dev->savePCH_PIPEBSRC, PCH_PIPEBSRC); + PSB_WVDC32(hdmi_dev->savePCH_HTOTAL_B, PCH_HTOTAL_B); + PSB_WVDC32(hdmi_dev->savePCH_HBLANK_B, PCH_HBLANK_B); + PSB_WVDC32(hdmi_dev->savePCH_HSYNC_B, PCH_HSYNC_B); + PSB_WVDC32(hdmi_dev->savePCH_VTOTAL_B, PCH_VTOTAL_B); + PSB_WVDC32(hdmi_dev->savePCH_VBLANK_B, PCH_VBLANK_B); + PSB_WVDC32(hdmi_dev->savePCH_VSYNC_B, PCH_VSYNC_B); + + PSB_WVDC32(pipeb->conf, PIPEBCONF); + PSB_WVDC32(hdmi_dev->savePCH_PIPEBCONF, PCH_PIPEBCONF); + + /* plane */ + PSB_WVDC32(pipeb->linoff, DSPBLINOFF); + PSB_WVDC32(pipeb->stride, DSPBSTRIDE); + PSB_WVDC32(pipeb->tileoff, DSPBTILEOFF); + PSB_WVDC32(pipeb->cntr, DSPBCNTR); + PSB_WVDC32(pipeb->surf, DSPBSURF); + + /* cursor B */ + PSB_WVDC32(regs->saveDSPBCURSOR_CTRL, CURBCNTR); + PSB_WVDC32(regs->saveDSPBCURSOR_POS, CURBPOS); + PSB_WVDC32(regs->saveDSPBCURSOR_BASE, CURBBASE); + + /* restore palette */ + for (i = 0; i < 256; i++) + PSB_WVDC32(pipeb->palette[i], PALETTE_B + (i << 2)); +} diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c new file mode 100644 index 000000000..fc9a34ed5 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_hdmi_i2c.c @@ -0,0 +1,331 @@ +/* + * Copyright © 2010 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Li Peng <peng.li@intel.com> + */ + +#include <linux/export.h> +#include <linux/mutex.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include "psb_drv.h" + +#define HDMI_READ(reg) readl(hdmi_dev->regs + (reg)) +#define HDMI_WRITE(reg, val) writel(val, hdmi_dev->regs + (reg)) + +#define HDMI_HCR 0x1000 +#define HCR_DETECT_HDP (1 << 6) +#define HCR_ENABLE_HDCP (1 << 5) +#define HCR_ENABLE_AUDIO (1 << 2) +#define HCR_ENABLE_PIXEL (1 << 1) +#define HCR_ENABLE_TMDS (1 << 0) +#define HDMI_HICR 0x1004 +#define HDMI_INTR_I2C_ERROR (1 << 4) +#define HDMI_INTR_I2C_FULL (1 << 3) +#define HDMI_INTR_I2C_DONE (1 << 2) +#define HDMI_INTR_HPD (1 << 0) +#define HDMI_HSR 0x1008 +#define HDMI_HISR 0x100C +#define HDMI_HI2CRDB0 0x1200 +#define HDMI_HI2CHCR 0x1240 +#define HI2C_HDCP_WRITE (0 << 2) +#define HI2C_HDCP_RI_READ (1 << 2) +#define HI2C_HDCP_READ (2 << 2) +#define HI2C_EDID_READ (3 << 2) +#define HI2C_READ_CONTINUE (1 << 1) +#define HI2C_ENABLE_TRANSACTION (1 << 0) + +#define HDMI_ICRH 0x1100 +#define HDMI_HI2CTDR0 0x1244 +#define HDMI_HI2CTDR1 0x1248 + +#define I2C_STAT_INIT 0 +#define I2C_READ_DONE 1 +#define I2C_TRANSACTION_DONE 2 + +struct hdmi_i2c_dev { + struct i2c_adapter *adap; + struct mutex i2c_lock; + struct completion complete; + int status; + struct i2c_msg *msg; + int buf_offset; +}; + +static void hdmi_i2c_irq_enable(struct oaktrail_hdmi_dev *hdmi_dev) +{ + u32 temp; + + temp = HDMI_READ(HDMI_HICR); + temp |= (HDMI_INTR_I2C_ERROR | HDMI_INTR_I2C_FULL | HDMI_INTR_I2C_DONE); + HDMI_WRITE(HDMI_HICR, temp); + HDMI_READ(HDMI_HICR); +} + +static void hdmi_i2c_irq_disable(struct oaktrail_hdmi_dev *hdmi_dev) +{ + HDMI_WRITE(HDMI_HICR, 0x0); + HDMI_READ(HDMI_HICR); +} + +static int xfer_read(struct i2c_adapter *adap, struct i2c_msg *pmsg) +{ + struct oaktrail_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap); + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + u32 temp; + + i2c_dev->status = I2C_STAT_INIT; + i2c_dev->msg = pmsg; + i2c_dev->buf_offset = 0; + reinit_completion(&i2c_dev->complete); + + /* Enable I2C transaction */ + temp = ((pmsg->len) << 20) | HI2C_EDID_READ | HI2C_ENABLE_TRANSACTION; + HDMI_WRITE(HDMI_HI2CHCR, temp); + HDMI_READ(HDMI_HI2CHCR); + + while (i2c_dev->status != I2C_TRANSACTION_DONE) + wait_for_completion_interruptible_timeout(&i2c_dev->complete, + 10 * HZ); + + return 0; +} + +static int xfer_write(struct i2c_adapter *adap, struct i2c_msg *pmsg) +{ + /* + * XXX: i2c write seems isn't useful for EDID probe, don't do anything + */ + return 0; +} + +static int oaktrail_hdmi_i2c_access(struct i2c_adapter *adap, + struct i2c_msg *pmsg, + int num) +{ + struct oaktrail_hdmi_dev *hdmi_dev = i2c_get_adapdata(adap); + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + int i; + + mutex_lock(&i2c_dev->i2c_lock); + + /* Enable i2c unit */ + HDMI_WRITE(HDMI_ICRH, 0x00008760); + + /* Enable irq */ + hdmi_i2c_irq_enable(hdmi_dev); + for (i = 0; i < num; i++) { + if (pmsg->len && pmsg->buf) { + if (pmsg->flags & I2C_M_RD) + xfer_read(adap, pmsg); + else + xfer_write(adap, pmsg); + } + pmsg++; /* next message */ + } + + /* Disable irq */ + hdmi_i2c_irq_disable(hdmi_dev); + + mutex_unlock(&i2c_dev->i2c_lock); + + return i; +} + +static u32 oaktrail_hdmi_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm oaktrail_hdmi_i2c_algorithm = { + .master_xfer = oaktrail_hdmi_i2c_access, + .functionality = oaktrail_hdmi_i2c_func, +}; + +static struct i2c_adapter oaktrail_hdmi_i2c_adapter = { + .name = "oaktrail_hdmi_i2c", + .nr = 3, + .owner = THIS_MODULE, + .class = I2C_CLASS_DDC, + .algo = &oaktrail_hdmi_i2c_algorithm, +}; + +static void hdmi_i2c_read(struct oaktrail_hdmi_dev *hdmi_dev) +{ + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + struct i2c_msg *msg = i2c_dev->msg; + u8 *buf = msg->buf; + u32 temp; + int i, offset; + + offset = i2c_dev->buf_offset; + for (i = 0; i < 0x10; i++) { + temp = HDMI_READ(HDMI_HI2CRDB0 + (i * 4)); + memcpy(buf + (offset + i * 4), &temp, 4); + } + i2c_dev->buf_offset += (0x10 * 4); + + /* clearing read buffer full intr */ + temp = HDMI_READ(HDMI_HISR); + HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_FULL); + HDMI_READ(HDMI_HISR); + + /* continue read transaction */ + temp = HDMI_READ(HDMI_HI2CHCR); + HDMI_WRITE(HDMI_HI2CHCR, temp | HI2C_READ_CONTINUE); + HDMI_READ(HDMI_HI2CHCR); + + i2c_dev->status = I2C_READ_DONE; + return; +} + +static void hdmi_i2c_transaction_done(struct oaktrail_hdmi_dev *hdmi_dev) +{ + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + u32 temp; + + /* clear transaction done intr */ + temp = HDMI_READ(HDMI_HISR); + HDMI_WRITE(HDMI_HISR, temp | HDMI_INTR_I2C_DONE); + HDMI_READ(HDMI_HISR); + + + temp = HDMI_READ(HDMI_HI2CHCR); + HDMI_WRITE(HDMI_HI2CHCR, temp & ~HI2C_ENABLE_TRANSACTION); + HDMI_READ(HDMI_HI2CHCR); + + i2c_dev->status = I2C_TRANSACTION_DONE; + return; +} + +static irqreturn_t oaktrail_hdmi_i2c_handler(int this_irq, void *dev) +{ + struct oaktrail_hdmi_dev *hdmi_dev = dev; + struct hdmi_i2c_dev *i2c_dev = hdmi_dev->i2c_dev; + u32 stat; + + stat = HDMI_READ(HDMI_HISR); + + if (stat & HDMI_INTR_HPD) { + HDMI_WRITE(HDMI_HISR, stat | HDMI_INTR_HPD); + HDMI_READ(HDMI_HISR); + } + + if (stat & HDMI_INTR_I2C_FULL) + hdmi_i2c_read(hdmi_dev); + + if (stat & HDMI_INTR_I2C_DONE) + hdmi_i2c_transaction_done(hdmi_dev); + + complete(&i2c_dev->complete); + + return IRQ_HANDLED; +} + +/* + * choose alternate function 2 of GPIO pin 52, 53, + * which is used by HDMI I2C logic + */ +static void oaktrail_hdmi_i2c_gpio_fix(void) +{ + void __iomem *base; + unsigned int gpio_base = 0xff12c000; + int gpio_len = 0x1000; + u32 temp; + + base = ioremap((resource_size_t)gpio_base, gpio_len); + if (base == NULL) { + DRM_ERROR("gpio ioremap fail\n"); + return; + } + + temp = readl(base + 0x44); + DRM_DEBUG_DRIVER("old gpio val %x\n", temp); + writel((temp | 0x00000a00), (base + 0x44)); + temp = readl(base + 0x44); + DRM_DEBUG_DRIVER("new gpio val %x\n", temp); + + iounmap(base); +} + +int oaktrail_hdmi_i2c_init(struct pci_dev *dev) +{ + struct oaktrail_hdmi_dev *hdmi_dev; + struct hdmi_i2c_dev *i2c_dev; + int ret; + + hdmi_dev = pci_get_drvdata(dev); + + i2c_dev = kzalloc(sizeof(struct hdmi_i2c_dev), GFP_KERNEL); + if (!i2c_dev) + return -ENOMEM; + + i2c_dev->adap = &oaktrail_hdmi_i2c_adapter; + i2c_dev->status = I2C_STAT_INIT; + init_completion(&i2c_dev->complete); + mutex_init(&i2c_dev->i2c_lock); + i2c_set_adapdata(&oaktrail_hdmi_i2c_adapter, hdmi_dev); + hdmi_dev->i2c_dev = i2c_dev; + + /* Enable HDMI I2C function on gpio */ + oaktrail_hdmi_i2c_gpio_fix(); + + /* request irq */ + ret = request_irq(dev->irq, oaktrail_hdmi_i2c_handler, IRQF_SHARED, + oaktrail_hdmi_i2c_adapter.name, hdmi_dev); + if (ret) { + DRM_ERROR("Failed to request IRQ for I2C controller\n"); + goto free_dev; + } + + /* Adapter registration */ + ret = i2c_add_numbered_adapter(&oaktrail_hdmi_i2c_adapter); + if (ret) { + DRM_ERROR("Failed to add I2C adapter\n"); + goto free_irq; + } + + return 0; + +free_irq: + free_irq(dev->irq, hdmi_dev); +free_dev: + kfree(i2c_dev); + + return ret; +} + +void oaktrail_hdmi_i2c_exit(struct pci_dev *dev) +{ + struct oaktrail_hdmi_dev *hdmi_dev; + struct hdmi_i2c_dev *i2c_dev; + + hdmi_dev = pci_get_drvdata(dev); + i2c_del_adapter(&oaktrail_hdmi_i2c_adapter); + + i2c_dev = hdmi_dev->i2c_dev; + kfree(i2c_dev); + free_irq(dev->irq, hdmi_dev); +} diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c new file mode 100644 index 000000000..75b4eb1c8 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2006-2009 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include <linux/pm_runtime.h> + +#include <asm/intel-mid.h> + +#include <drm/drm_edid.h> +#include <drm/drm_simple_kms_helper.h> + +#include "intel_bios.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +/* The max/min PWM frequency in BPCR[31:17] - */ +/* The smallest number is 1 (not 0) that can fit in the + * 15-bit field of the and then*/ +/* shifts to the left by one bit to get the actual 16-bit + * value that the 15-bits correspond to.*/ +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BRIGHTNESS_MAX_LEVEL 100 + +/* + * Sets the power state for the panel. + */ +static void oaktrail_lvds_set_power(struct drm_device *dev, + struct gma_encoder *gma_encoder, + bool on) +{ + u32 pp_status; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (!gma_power_begin(dev, true)) + return; + + if (on) { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); + dev_priv->is_lvds_on = true; + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, true); + } else { + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, false); + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while (pp_status & PP_ON); + dev_priv->is_lvds_on = false; + } + gma_power_end(dev); +} + +static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct gma_encoder *gma_encoder = to_gma_encoder(encoder); + + if (mode == DRM_MODE_DPMS_ON) + oaktrail_lvds_set_power(dev, gma_encoder, true); + else + oaktrail_lvds_set_power(dev, gma_encoder, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void oaktrail_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector = NULL; + struct drm_crtc *crtc = encoder->crtc; + u32 lvds_port; + uint64_t v = DRM_MODE_SCALE_FULLSCREEN; + + if (!gma_power_begin(dev, true)) + return; + + /* + * The LVDS pin pair will already have been turned on in the + * psb_intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + lvds_port = (REG_READ(LVDS) & + (~LVDS_PIPEB_SELECT)) | + LVDS_PORT_EN | + LVDS_BORDER_EN; + + /* If the firmware says dither on Moorestown, or the BIOS does + on Oaktrail then enable dithering */ + if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) + lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; + + REG_WRITE(LVDS, lvds_port); + + /* Find the connector we're trying to set up */ + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + if (connector->encoder && connector->encoder->crtc == crtc) + break; + } + + if (!connector) { + drm_connector_list_iter_end(&conn_iter); + DRM_ERROR("Couldn't find connector when setting mode"); + gma_power_end(dev); + return; + } + + drm_object_property_get_value( &connector->base, + dev->mode_config.scaling_mode_property, &v); + drm_connector_list_iter_end(&conn_iter); + + if (v == DRM_MODE_SCALE_NO_SCALE) + REG_WRITE(PFIT_CONTROL, 0); + else if (v == DRM_MODE_SCALE_ASPECT) { + if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || + (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { + if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == + (mode->hdisplay * adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + else if ((adjusted_mode->crtc_hdisplay * + mode->vdisplay) > (mode->hdisplay * + adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_PILLARBOX); + else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_LETTERBOX); + } else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + + gma_power_end(dev); +} + +static void oaktrail_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_encoder *gma_encoder = to_gma_encoder(encoder); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (!gma_power_begin(dev, true)) + return; + + mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + oaktrail_lvds_set_power(dev, gma_encoder, false); + gma_power_end(dev); +} + +static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 ret; + + if (gma_power_begin(dev, false)) { + ret = ((REG_READ(BLC_PWM_CTL) & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + gma_power_end(dev); + } else + ret = ((dev_priv->regs.saveBLC_PWM_CTL & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + return ret; +} + +static void oaktrail_lvds_commit(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_encoder *gma_encoder = to_gma_encoder(encoder); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (mode_dev->backlight_duty_cycle == 0) + mode_dev->backlight_duty_cycle = + oaktrail_lvds_get_max_backlight(dev); + oaktrail_lvds_set_power(dev, gma_encoder, true); +} + +static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = { + .dpms = oaktrail_lvds_dpms, + .mode_fixup = psb_intel_lvds_mode_fixup, + .prepare = oaktrail_lvds_prepare, + .mode_set = oaktrail_lvds_mode_set, + .commit = oaktrail_lvds_commit, +}; + +/* Returns the panel fixed mode from configuration. */ + +static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct drm_display_mode *mode = NULL; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD; + + mode_dev->panel_fixed_mode = NULL; + + /* Use the firmware provided data on Moorestown */ + if (dev_priv->has_gct) { + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return; + + mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; + mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; + mode->hsync_start = mode->hdisplay + \ + ((ti->hsync_offset_hi << 8) | \ + ti->hsync_offset_lo); + mode->hsync_end = mode->hsync_start + \ + ((ti->hsync_pulse_width_hi << 8) | \ + ti->hsync_pulse_width_lo); + mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ + ti->hblank_lo); + mode->vsync_start = \ + mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ + ti->vsync_offset_lo); + mode->vsync_end = \ + mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ + ti->vsync_pulse_width_lo); + mode->vtotal = mode->vdisplay + \ + ((ti->vblank_hi << 8) | ti->vblank_lo); + mode->clock = ti->pixel_clock * 10; +#if 0 + pr_info("hdisplay is %d\n", mode->hdisplay); + pr_info("vdisplay is %d\n", mode->vdisplay); + pr_info("HSS is %d\n", mode->hsync_start); + pr_info("HSE is %d\n", mode->hsync_end); + pr_info("htotal is %d\n", mode->htotal); + pr_info("VSS is %d\n", mode->vsync_start); + pr_info("VSE is %d\n", mode->vsync_end); + pr_info("vtotal is %d\n", mode->vtotal); + pr_info("clock is %d\n", mode->clock); +#endif + mode_dev->panel_fixed_mode = mode; + } + + /* Use the BIOS VBT mode if available */ + if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode) + mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, + mode_dev->vbt_mode); + + /* Then try the LVDS VBT mode */ + if (mode_dev->panel_fixed_mode == NULL) + if (dev_priv->lfp_lvds_vbt_mode) + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, + dev_priv->lfp_lvds_vbt_mode); + + /* If we still got no mode then bail */ + if (mode_dev->panel_fixed_mode == NULL) + return; + + drm_mode_set_name(mode_dev->panel_fixed_mode); + drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0); +} + +/** + * oaktrail_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * @mode_dev: PSB mode device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void oaktrail_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct gma_encoder *gma_encoder; + struct gma_connector *gma_connector; + struct gma_i2c_chan *ddc_bus; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct edid *edid; + struct i2c_adapter *i2c_adap; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + int ret; + + gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); + if (!gma_encoder) + return; + + gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); + if (!gma_connector) + goto err_free_encoder; + + connector = &gma_connector->base; + encoder = &gma_encoder->base; + dev_priv->is_lvds_on = true; + ret = drm_connector_init(dev, connector, + &psb_intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + if (ret) + goto err_free_connector; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); + if (ret) + goto err_connector_cleanup; + + gma_connector_attach_encoder(gma_connector, gma_encoder); + gma_encoder->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs); + drm_connector_helper_add(connector, + &psb_intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + drm_object_attach_property(&connector->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + drm_object_attach_property(&connector->base, + dev_priv->backlight_property, + BRIGHTNESS_MAX_LEVEL); + + mode_dev->panel_wants_dither = false; + if (dev_priv->has_gct) + mode_dev->panel_wants_dither = (dev_priv->gct_data. + Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); + if (dev_priv->lvds_dither) + mode_dev->panel_wants_dither = 1; + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + edid = NULL; + mutex_lock(&dev->mode_config.mutex); + + i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); + if (i2c_adap) + edid = drm_get_edid(connector, i2c_adap); + + if (edid == NULL && dev_priv->lpc_gpio_base) { + ddc_bus = oaktrail_lvds_i2c_init(dev); + if (!IS_ERR(ddc_bus)) { + i2c_adap = &ddc_bus->base; + edid = drm_get_edid(connector, i2c_adap); + } + } + + /* + * Due to the logic in probing for i2c buses above we do not know the + * i2c_adap until now. Hence we cannot use drm_connector_init_with_ddc() + * but must instead set connector->ddc manually here. + */ + connector->ddc = i2c_adap; + + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + if (edid) { + drm_connector_update_edid_property(connector, edid); + drm_add_edid_modes(connector, edid); + kfree(edid); + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + goto out; /* FIXME: check for quirks */ + } + } + } else + dev_err(dev->dev, "No ddc adapter available!\n"); + /* + * If we didn't get EDID, try geting panel timing + * from configuration data + */ + oaktrail_lvds_get_configuration_mode(dev, mode_dev); + + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + + /* If we still don't have a mode after all that, give up. */ + if (!mode_dev->panel_fixed_mode) { + dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); + goto err_unlock; + } + +out: + mutex_unlock(&dev->mode_config.mutex); + + return; + +err_unlock: + mutex_unlock(&dev->mode_config.mutex); + gma_i2c_destroy(to_gma_i2c_chan(connector->ddc)); + drm_encoder_cleanup(encoder); +err_connector_cleanup: + drm_connector_cleanup(connector); +err_free_connector: + kfree(gma_connector); +err_free_encoder: + kfree(gma_encoder); +} + diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c b/drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c new file mode 100644 index 000000000..06b5b2d70 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c @@ -0,0 +1,169 @@ +/* + * Copyright (c) 2002-2010, Intel Corporation. + * Copyright (c) 2014 ATRON electronic GmbH + * Author: Jan Safrata <jan.nikitenko@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include <linux/delay.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/types.h> + +#include "psb_drv.h" +#include "psb_intel_reg.h" + + +/* + * LPC GPIO based I2C bus for LVDS of Atom E6xx + */ + +/*----------------------------------------------------------------------------- + * LPC Register Offsets. Used for LVDS GPIO Bit Bashing. Registers are part + * Atom E6xx [D31:F0] + ----------------------------------------------------------------------------*/ +#define RGEN 0x20 +#define RGIO 0x24 +#define RGLVL 0x28 +#define RGTPE 0x2C +#define RGTNE 0x30 +#define RGGPE 0x34 +#define RGSMI 0x38 +#define RGTS 0x3C + +/* The LVDS GPIO clock lines are GPIOSUS[3] + * The LVDS GPIO data lines are GPIOSUS[4] + */ +#define GPIO_CLOCK 0x08 +#define GPIO_DATA 0x10 + +#define LPC_READ_REG(chan, r) inl((chan)->reg + (r)) +#define LPC_WRITE_REG(chan, r, val) outl((val), (chan)->reg + (r)) + +static int get_clock(void *data) +{ + struct gma_i2c_chan *chan = data; + u32 val; + + val = LPC_READ_REG(chan, RGIO); + val |= GPIO_CLOCK; + LPC_WRITE_REG(chan, RGIO, val); + LPC_READ_REG(chan, RGLVL); + val = (LPC_READ_REG(chan, RGLVL) & GPIO_CLOCK) ? 1 : 0; + + return val; +} + +static int get_data(void *data) +{ + struct gma_i2c_chan *chan = data; + u32 val; + + val = LPC_READ_REG(chan, RGIO); + val |= GPIO_DATA; + LPC_WRITE_REG(chan, RGIO, val); + LPC_READ_REG(chan, RGLVL); + val = (LPC_READ_REG(chan, RGLVL) & GPIO_DATA) ? 1 : 0; + + return val; +} + +static void set_clock(void *data, int state_high) +{ + struct gma_i2c_chan *chan = data; + u32 val; + + if (state_high) { + val = LPC_READ_REG(chan, RGIO); + val |= GPIO_CLOCK; + LPC_WRITE_REG(chan, RGIO, val); + } else { + val = LPC_READ_REG(chan, RGIO); + val &= ~GPIO_CLOCK; + LPC_WRITE_REG(chan, RGIO, val); + val = LPC_READ_REG(chan, RGLVL); + val &= ~GPIO_CLOCK; + LPC_WRITE_REG(chan, RGLVL, val); + } +} + +static void set_data(void *data, int state_high) +{ + struct gma_i2c_chan *chan = data; + u32 val; + + if (state_high) { + val = LPC_READ_REG(chan, RGIO); + val |= GPIO_DATA; + LPC_WRITE_REG(chan, RGIO, val); + } else { + val = LPC_READ_REG(chan, RGIO); + val &= ~GPIO_DATA; + LPC_WRITE_REG(chan, RGIO, val); + val = LPC_READ_REG(chan, RGLVL); + val &= ~GPIO_DATA; + LPC_WRITE_REG(chan, RGLVL, val); + } +} + +struct gma_i2c_chan *oaktrail_lvds_i2c_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_i2c_chan *chan; + int ret; + + chan = kzalloc(sizeof(struct gma_i2c_chan), GFP_KERNEL); + if (!chan) + return ERR_PTR(-ENOMEM); + + chan->drm_dev = dev; + chan->reg = dev_priv->lpc_gpio_base; + strncpy(chan->base.name, "gma500 LPC", I2C_NAME_SIZE - 1); + chan->base.owner = THIS_MODULE; + chan->base.algo_data = &chan->algo; + chan->base.dev.parent = dev->dev; + chan->algo.setsda = set_data; + chan->algo.setscl = set_clock; + chan->algo.getsda = get_data; + chan->algo.getscl = get_clock; + chan->algo.udelay = 100; + chan->algo.timeout = usecs_to_jiffies(2200); + chan->algo.data = chan; + + i2c_set_adapdata(&chan->base, chan); + + set_data(chan, 1); + set_clock(chan, 1); + udelay(50); + + ret = i2c_bit_add_bus(&chan->base); + if (ret < 0) { + kfree(chan); + return ERR_PTR(ret); + } + + return chan; +} diff --git a/drivers/gpu/drm/gma500/opregion.c b/drivers/gpu/drm/gma500/opregion.c new file mode 100644 index 000000000..0c271072a --- /dev/null +++ b/drivers/gpu/drm/gma500/opregion.c @@ -0,0 +1,352 @@ +/* + * Copyright 2011 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + */ +#include <linux/acpi.h> +#include "psb_drv.h" +#include "psb_irq.h" +#include "psb_intel_reg.h" + +#define PCI_ASLE 0xe4 +#define PCI_ASLS 0xfc + +#define OPREGION_HEADER_OFFSET 0 +#define OPREGION_ACPI_OFFSET 0x100 +#define ACPI_CLID 0x01ac /* current lid state indicator */ +#define ACPI_CDCK 0x01b0 /* current docking state indicator */ +#define OPREGION_SWSCI_OFFSET 0x200 +#define OPREGION_ASLE_OFFSET 0x300 +#define OPREGION_VBT_OFFSET 0x400 + +#define OPREGION_SIGNATURE "IntelGraphicsMem" +#define MBOX_ACPI (1<<0) +#define MBOX_SWSCI (1<<1) +#define MBOX_ASLE (1<<2) + +struct opregion_header { + u8 signature[16]; + u32 size; + u32 opregion_ver; + u8 bios_ver[32]; + u8 vbios_ver[16]; + u8 driver_ver[16]; + u32 mboxes; + u8 reserved[164]; +} __packed; + +/* OpRegion mailbox #1: public ACPI methods */ +struct opregion_acpi { + u32 drdy; /* driver readiness */ + u32 csts; /* notification status */ + u32 cevt; /* current event */ + u8 rsvd1[20]; + u32 didl[8]; /* supported display devices ID list */ + u32 cpdl[8]; /* currently presented display list */ + u32 cadl[8]; /* currently active display list */ + u32 nadl[8]; /* next active devices list */ + u32 aslp; /* ASL sleep time-out */ + u32 tidx; /* toggle table index */ + u32 chpd; /* current hotplug enable indicator */ + u32 clid; /* current lid state*/ + u32 cdck; /* current docking state */ + u32 sxsw; /* Sx state resume */ + u32 evts; /* ASL supported events */ + u32 cnot; /* current OS notification */ + u32 nrdy; /* driver status */ + u8 rsvd2[60]; +} __packed; + +/* OpRegion mailbox #2: SWSCI */ +struct opregion_swsci { + /*FIXME: add it later*/ +} __packed; + +/* OpRegion mailbox #3: ASLE */ +struct opregion_asle { + u32 ardy; /* driver readiness */ + u32 aslc; /* ASLE interrupt command */ + u32 tche; /* technology enabled indicator */ + u32 alsi; /* current ALS illuminance reading */ + u32 bclp; /* backlight brightness to set */ + u32 pfit; /* panel fitting state */ + u32 cblv; /* current brightness level */ + u16 bclm[20]; /* backlight level duty cycle mapping table */ + u32 cpfm; /* current panel fitting mode */ + u32 epfm; /* enabled panel fitting modes */ + u8 plut[74]; /* panel LUT and identifier */ + u32 pfmb; /* PWM freq and min brightness */ + u8 rsvd[102]; +} __packed; + +/* ASLE irq request bits */ +#define ASLE_SET_ALS_ILLUM (1 << 0) +#define ASLE_SET_BACKLIGHT (1 << 1) +#define ASLE_SET_PFIT (1 << 2) +#define ASLE_SET_PWM_FREQ (1 << 3) +#define ASLE_REQ_MSK 0xf + +/* response bits of ASLE irq request */ +#define ASLE_ALS_ILLUM_FAILED (1<<10) +#define ASLE_BACKLIGHT_FAILED (1<<12) +#define ASLE_PFIT_FAILED (1<<14) +#define ASLE_PWM_FREQ_FAILED (1<<16) + +/* ASLE backlight brightness to set */ +#define ASLE_BCLP_VALID (1<<31) +#define ASLE_BCLP_MSK (~(1<<31)) + +/* ASLE panel fitting request */ +#define ASLE_PFIT_VALID (1<<31) +#define ASLE_PFIT_CENTER (1<<0) +#define ASLE_PFIT_STRETCH_TEXT (1<<1) +#define ASLE_PFIT_STRETCH_GFX (1<<2) + +/* response bits of ASLE irq request */ +#define ASLE_ALS_ILLUM_FAILED (1<<10) +#define ASLE_BACKLIGHT_FAILED (1<<12) +#define ASLE_PFIT_FAILED (1<<14) +#define ASLE_PWM_FREQ_FAILED (1<<16) + +/* ASLE backlight brightness to set */ +#define ASLE_BCLP_VALID (1<<31) +#define ASLE_BCLP_MSK (~(1<<31)) + +/* ASLE panel fitting request */ +#define ASLE_PFIT_VALID (1<<31) +#define ASLE_PFIT_CENTER (1<<0) +#define ASLE_PFIT_STRETCH_TEXT (1<<1) +#define ASLE_PFIT_STRETCH_GFX (1<<2) + +/* PWM frequency and minimum brightness */ +#define ASLE_PFMB_BRIGHTNESS_MASK (0xff) +#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8) +#define ASLE_PFMB_PWM_MASK (0x7ffffe00) +#define ASLE_PFMB_PWM_VALID (1<<31) + +#define ASLE_CBLV_VALID (1<<31) + +static struct psb_intel_opregion *system_opregion; + +static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct opregion_asle *asle = dev_priv->opregion.asle; + + DRM_DEBUG_DRIVER("asle set backlight %x\n", bclp); + + if (!(bclp & ASLE_BCLP_VALID)) + return ASLE_BACKLIGHT_FAILED; + + bclp &= ASLE_BCLP_MSK; + if (bclp > 255) + return ASLE_BACKLIGHT_FAILED; + + gma_backlight_set(dev, bclp * PSB_MAX_BRIGHTNESS / 255); + + asle->cblv = (bclp * 0x64) / 0xff | ASLE_CBLV_VALID; + + return 0; +} + +static void psb_intel_opregion_asle_work(struct work_struct *work) +{ + struct psb_intel_opregion *opregion = + container_of(work, struct psb_intel_opregion, asle_work); + struct drm_psb_private *dev_priv = + container_of(opregion, struct drm_psb_private, opregion); + struct opregion_asle *asle = opregion->asle; + u32 asle_stat = 0; + u32 asle_req; + + if (!asle) + return; + + asle_req = asle->aslc & ASLE_REQ_MSK; + if (!asle_req) { + DRM_DEBUG_DRIVER("non asle set request??\n"); + return; + } + + if (asle_req & ASLE_SET_BACKLIGHT) + asle_stat |= asle_set_backlight(&dev_priv->dev, asle->bclp); + + asle->aslc = asle_stat; + +} + +void psb_intel_opregion_asle_intr(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (dev_priv->opregion.asle) + schedule_work(&dev_priv->opregion.asle_work); +} + +#define ASLE_ALS_EN (1<<0) +#define ASLE_BLC_EN (1<<1) +#define ASLE_PFIT_EN (1<<2) +#define ASLE_PFMB_EN (1<<3) + +void psb_intel_opregion_enable_asle(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct opregion_asle *asle = dev_priv->opregion.asle; + + if (asle && system_opregion ) { + /* Don't do this on Medfield or other non PC like devices, they + use the bit for something different altogether */ + gma_enable_pipestat(dev_priv, 0, PIPE_LEGACY_BLC_EVENT_ENABLE); + gma_enable_pipestat(dev_priv, 1, PIPE_LEGACY_BLC_EVENT_ENABLE); + + asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN + | ASLE_PFMB_EN; + asle->ardy = 1; + } +} + +#define ACPI_EV_DISPLAY_SWITCH (1<<0) +#define ACPI_EV_LID (1<<1) +#define ACPI_EV_DOCK (1<<2) + + +static int psb_intel_opregion_video_event(struct notifier_block *nb, + unsigned long val, void *data) +{ + /* The only video events relevant to opregion are 0x80. These indicate + either a docking event, lid switch or display switch request. In + Linux, these are handled by the dock, button and video drivers. + We might want to fix the video driver to be opregion-aware in + future, but right now we just indicate to the firmware that the + request has been handled */ + + struct opregion_acpi *acpi; + + if (!system_opregion) + return NOTIFY_DONE; + + acpi = system_opregion->acpi; + acpi->csts = 0; + + return NOTIFY_OK; +} + +static struct notifier_block psb_intel_opregion_notifier = { + .notifier_call = psb_intel_opregion_video_event, +}; + +void psb_intel_opregion_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_opregion *opregion = &dev_priv->opregion; + + if (!opregion->header) + return; + + if (opregion->acpi) { + /* Notify BIOS we are ready to handle ACPI video ext notifs. + * Right now, all the events are handled by the ACPI video + * module. We don't actually need to do anything with them. */ + opregion->acpi->csts = 0; + opregion->acpi->drdy = 1; + + system_opregion = opregion; + register_acpi_notifier(&psb_intel_opregion_notifier); + } +} + +void psb_intel_opregion_fini(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_opregion *opregion = &dev_priv->opregion; + + if (!opregion->header) + return; + + if (opregion->acpi) { + opregion->acpi->drdy = 0; + + system_opregion = NULL; + unregister_acpi_notifier(&psb_intel_opregion_notifier); + } + + cancel_work_sync(&opregion->asle_work); + + /* just clear all opregion memory pointers now */ + iounmap(opregion->header); + opregion->header = NULL; + opregion->acpi = NULL; + opregion->swsci = NULL; + opregion->asle = NULL; + opregion->vbt = NULL; +} + +int psb_intel_opregion_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct psb_intel_opregion *opregion = &dev_priv->opregion; + u32 opregion_phy, mboxes; + void __iomem *base; + int err = 0; + + pci_read_config_dword(pdev, PCI_ASLS, &opregion_phy); + if (opregion_phy == 0) { + DRM_DEBUG_DRIVER("ACPI Opregion not supported\n"); + return -ENOTSUPP; + } + + INIT_WORK(&opregion->asle_work, psb_intel_opregion_asle_work); + + DRM_DEBUG("OpRegion detected at 0x%8x\n", opregion_phy); + base = acpi_os_ioremap(opregion_phy, 8*1024); + if (!base) + return -ENOMEM; + + if (memcmp(base, OPREGION_SIGNATURE, 16)) { + DRM_DEBUG_DRIVER("opregion signature mismatch\n"); + err = -EINVAL; + goto err_out; + } + + opregion->header = base; + opregion->vbt = base + OPREGION_VBT_OFFSET; + + opregion->lid_state = base + ACPI_CLID; + + mboxes = opregion->header->mboxes; + if (mboxes & MBOX_ACPI) { + DRM_DEBUG_DRIVER("Public ACPI methods supported\n"); + opregion->acpi = base + OPREGION_ACPI_OFFSET; + } + + if (mboxes & MBOX_ASLE) { + DRM_DEBUG_DRIVER("ASLE supported\n"); + opregion->asle = base + OPREGION_ASLE_OFFSET; + } + + return 0; + +err_out: + iounmap(base); + return err; +} + diff --git a/drivers/gpu/drm/gma500/opregion.h b/drivers/gpu/drm/gma500/opregion.h new file mode 100644 index 000000000..4a90f8b0e --- /dev/null +++ b/drivers/gpu/drm/gma500/opregion.h @@ -0,0 +1,54 @@ +/* + * Copyright 2012 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + */ + +#if defined(CONFIG_ACPI) +extern void psb_intel_opregion_asle_intr(struct drm_device *dev); +extern void psb_intel_opregion_init(struct drm_device *dev); +extern void psb_intel_opregion_fini(struct drm_device *dev); +extern int psb_intel_opregion_setup(struct drm_device *dev); +extern void psb_intel_opregion_enable_asle(struct drm_device *dev); + +#else + +extern inline void psb_intel_opregion_asle_intr(struct drm_device *dev) +{ +} + +extern inline void psb_intel_opregion_init(struct drm_device *dev) +{ +} + +extern inline void psb_intel_opregion_fini(struct drm_device *dev) +{ +} + +extern inline int psb_intel_opregion_setup(struct drm_device *dev) +{ + return 0; +} + +extern inline void psb_intel_opregion_enable_asle(struct drm_device *dev) +{ +} +#endif diff --git a/drivers/gpu/drm/gma500/power.c b/drivers/gpu/drm/gma500/power.c new file mode 100644 index 000000000..186af29be --- /dev/null +++ b/drivers/gpu/drm/gma500/power.c @@ -0,0 +1,232 @@ +/************************************************************************** + * Copyright (c) 2009-2011, Intel Corporation. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Benjamin Defnet <benjamin.r.defnet@intel.com> + * Rajesh Poornachandran <rajesh.poornachandran@intel.com> + * Massively reworked + * Alan Cox <alan@linux.intel.com> + */ + +#include "gem.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_reg.h" +#include "psb_intel_reg.h" +#include "psb_irq.h" +#include <linux/mutex.h> +#include <linux/pm_runtime.h> + +/** + * gma_power_init - initialise power manager + * @dev: our device + * + * Set up for power management tracking of our hardware. + */ +void gma_power_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + /* FIXME: Move APM/OSPM base into relevant device code */ + dev_priv->apm_base = dev_priv->apm_reg & 0xffff; + dev_priv->ospm_base &= 0xffff; + + if (dev_priv->ops->init_pm) + dev_priv->ops->init_pm(dev); + + /* + * Runtime pm support is broken atm. So for now unconditionally + * call pm_runtime_get() here and put it again in psb_driver_unload() + * + * To fix this we need to call pm_runtime_get() once for each active + * pipe at boot and then put() / get() for each pipe disable / enable + * so that the device gets runtime suspended when no pipes are active. + * Once this is in place the pm_runtime_get() below should be replaced + * by a pm_runtime_allow() call to undo the pm_runtime_forbid() from + * pci_pm_init(). + */ + pm_runtime_get(dev->dev); + + dev_priv->pm_initialized = true; +} + +/** + * gma_power_uninit - end power manager + * @dev: device to end for + * + * Undo the effects of gma_power_init + */ +void gma_power_uninit(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + if (!dev_priv->pm_initialized) + return; + + pm_runtime_put_noidle(dev->dev); +} + +/** + * gma_suspend_display - suspend the display logic + * @dev: our DRM device + * + * Suspend the display logic of the graphics interface + */ +static void gma_suspend_display(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + dev_priv->ops->save_regs(dev); + dev_priv->ops->power_down(dev); +} + +/** + * gma_resume_display - resume display side logic + * @pdev: PCI device + * + * Resume the display hardware restoring state and enabling + * as necessary. + */ +static void gma_resume_display(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + /* turn on the display power island */ + dev_priv->ops->power_up(dev); + + PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL); + pci_write_config_word(pdev, PSB_GMCH_CTRL, + dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED); + + /* Rebuild our GTT mappings */ + psb_gtt_resume(dev); + psb_gem_mm_resume(dev); + dev_priv->ops->restore_regs(dev); +} + +/** + * gma_suspend_pci - suspend PCI side + * @pdev: PCI device + * + * Perform the suspend processing on our PCI device state + */ +static void gma_suspend_pci(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int bsm, vbt; + + pci_save_state(pdev); + pci_read_config_dword(pdev, 0x5C, &bsm); + dev_priv->regs.saveBSM = bsm; + pci_read_config_dword(pdev, 0xFC, &vbt); + dev_priv->regs.saveVBT = vbt; + + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); +} + +/** + * gma_resume_pci - resume helper + * @pdev: our PCI device + * + * Perform the resume processing on our PCI device state - rewrite + * register state and re-enable the PCI device + */ +static int gma_resume_pci(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_write_config_dword(pdev, 0x5c, dev_priv->regs.saveBSM); + pci_write_config_dword(pdev, 0xFC, dev_priv->regs.saveVBT); + + return pci_enable_device(pdev); +} + +/** + * gma_power_suspend - bus callback for suspend + * @_dev: our device + * + * Called back by the PCI layer during a suspend of the system. We + * perform the necessary shut down steps and save enough state that + * we can undo this when resume is called. + */ +int gma_power_suspend(struct device *_dev) +{ + struct pci_dev *pdev = to_pci_dev(_dev); + struct drm_device *dev = pci_get_drvdata(pdev); + + gma_irq_uninstall(dev); + gma_suspend_display(dev); + gma_suspend_pci(pdev); + return 0; +} + +/** + * gma_power_resume - resume power + * @_dev: our device + * + * Resume the PCI side of the graphics and then the displays + */ +int gma_power_resume(struct device *_dev) +{ + struct pci_dev *pdev = to_pci_dev(_dev); + struct drm_device *dev = pci_get_drvdata(pdev); + + gma_resume_pci(pdev); + gma_resume_display(pdev); + gma_irq_install(dev); + return 0; +} + +/** + * gma_power_begin - begin requiring power + * @dev: our DRM device + * @force_on: true to force power on + * + * Begin an action that requires the display power island is enabled. + * We refcount the islands. + */ +bool gma_power_begin(struct drm_device *dev, bool force_on) +{ + if (force_on) + return pm_runtime_resume_and_get(dev->dev) == 0; + else + return pm_runtime_get_if_in_use(dev->dev) == 1; +} + +/** + * gma_power_end - end use of power + * @dev: Our DRM device + * + * Indicate that one of our gma_power_begin() requested periods when + * the diplay island power is needed has completed. + */ +void gma_power_end(struct drm_device *dev) +{ + pm_runtime_put(dev->dev); +} diff --git a/drivers/gpu/drm/gma500/power.h b/drivers/gpu/drm/gma500/power.h new file mode 100644 index 000000000..063328d66 --- /dev/null +++ b/drivers/gpu/drm/gma500/power.h @@ -0,0 +1,54 @@ +/************************************************************************** + * Copyright (c) 2009-2011, Intel Corporation. + * All Rights Reserved. + + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Benjamin Defnet <benjamin.r.defnet@intel.com> + * Rajesh Poornachandran <rajesh.poornachandran@intel.com> + * Massively reworked + * Alan Cox <alan@linux.intel.com> + */ +#ifndef _PSB_POWERMGMT_H_ +#define _PSB_POWERMGMT_H_ + +#include <linux/pci.h> + +struct device; +struct drm_device; + +void gma_power_init(struct drm_device *dev); +void gma_power_uninit(struct drm_device *dev); + +/* + * The kernel bus power management will call these functions + */ +int gma_power_suspend(struct device *dev); +int gma_power_resume(struct device *dev); + +/* + * These are the functions the driver should use to wrap all hw access + * (i.e. register reads and writes) + */ +bool gma_power_begin(struct drm_device *dev, bool force); +void gma_power_end(struct drm_device *dev); + +#endif /*_PSB_POWERMGMT_H_*/ diff --git a/drivers/gpu/drm/gma500/psb_device.c b/drivers/gpu/drm/gma500/psb_device.c new file mode 100644 index 000000000..3c294c38b --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_device.c @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#include <drm/drm.h> + +#include "gma_device.h" +#include "intel_bios.h" +#include "psb_device.h" +#include "psb_drv.h" +#include "psb_intel_reg.h" +#include "psb_reg.h" + +static int psb_output_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + psb_intel_lvds_init(dev, &dev_priv->mode_dev); + psb_intel_sdvo_init(dev, SDVOB); + return 0; +} + +/* + * Poulsbo Backlight Interfaces + */ + +#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ +#define BLC_PWM_FREQ_CALC_CONSTANT 32 +#define MHz 1000000 + +#define PSB_BLC_PWM_PRECISION_FACTOR 10 +#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE +#define PSB_BLC_MIN_PWM_REG_FREQ 0x2 + +#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) +#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) + +static int psb_backlight_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned long core_clock; + /* u32 bl_max_freq; */ + /* unsigned long value; */ + u16 bl_max_freq; + uint32_t value; + uint32_t blc_pwm_precision_factor; + + /* get bl_max_freq and pol from dev_priv*/ + if (!dev_priv->lvds_bl) { + dev_err(dev->dev, "Has no valid LVDS backlight info\n"); + return -ENOENT; + } + bl_max_freq = dev_priv->lvds_bl->freq; + blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR; + + core_clock = dev_priv->core_freq; + + value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT; + value *= blc_pwm_precision_factor; + value /= bl_max_freq; + value /= blc_pwm_precision_factor; + + if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ || + value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ) + return -ERANGE; + else { + value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; + REG_WRITE(BLC_PWM_CTL, + (value << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (value)); + } + + psb_intel_lvds_set_brightness(dev, PSB_MAX_BRIGHTNESS); + /* This must occur after the backlight is properly initialised */ + psb_lid_timer_init(dev_priv); + return 0; +} + +/* + * Provide the Poulsbo specific chip logic and low level methods + * for power management + */ + +static void psb_init_pm(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL); + gating &= ~3; /* Disable 2D clock gating */ + gating |= 1; + PSB_WSGX32(gating, PSB_CR_CLKGATECTL); + PSB_RSGX32(PSB_CR_CLKGATECTL); +} + +/** + * psb_save_display_registers - save registers lost on suspend + * @dev: our DRM device + * + * Save the state we need in order to be able to restore the interface + * upon resume from suspend + */ +static int psb_save_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_connector *gma_connector; + struct drm_crtc *crtc; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + struct psb_state *regs = &dev_priv->regs.psb; + + /* Display arbitration control + watermarks */ + regs->saveDSPARB = PSB_RVDC32(DSPARB); + regs->saveDSPFW1 = PSB_RVDC32(DSPFW1); + regs->saveDSPFW2 = PSB_RVDC32(DSPFW2); + regs->saveDSPFW3 = PSB_RVDC32(DSPFW3); + regs->saveDSPFW4 = PSB_RVDC32(DSPFW4); + regs->saveDSPFW5 = PSB_RVDC32(DSPFW5); + regs->saveDSPFW6 = PSB_RVDC32(DSPFW6); + regs->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT); + + /* Save crtc and output state */ + drm_modeset_lock_all(dev); + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (drm_helper_crtc_in_use(crtc)) + dev_priv->ops->save_crtc(crtc); + } + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + gma_connector = to_gma_connector(connector); + if (gma_connector->save) + gma_connector->save(connector); + } + drm_connector_list_iter_end(&conn_iter); + + drm_modeset_unlock_all(dev); + return 0; +} + +/** + * psb_restore_display_registers - restore lost register state + * @dev: our DRM device + * + * Restore register state that was lost during suspend and resume. + */ +static int psb_restore_display_registers(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_connector *gma_connector; + struct drm_crtc *crtc; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + struct psb_state *regs = &dev_priv->regs.psb; + + /* Display arbitration + watermarks */ + PSB_WVDC32(regs->saveDSPARB, DSPARB); + PSB_WVDC32(regs->saveDSPFW1, DSPFW1); + PSB_WVDC32(regs->saveDSPFW2, DSPFW2); + PSB_WVDC32(regs->saveDSPFW3, DSPFW3); + PSB_WVDC32(regs->saveDSPFW4, DSPFW4); + PSB_WVDC32(regs->saveDSPFW5, DSPFW5); + PSB_WVDC32(regs->saveDSPFW6, DSPFW6); + PSB_WVDC32(regs->saveCHICKENBIT, DSPCHICKENBIT); + + /*make sure VGA plane is off. it initializes to on after reset!*/ + PSB_WVDC32(0x80000000, VGACNTRL); + + drm_modeset_lock_all(dev); + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) + if (drm_helper_crtc_in_use(crtc)) + dev_priv->ops->restore_crtc(crtc); + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + gma_connector = to_gma_connector(connector); + if (gma_connector->restore) + gma_connector->restore(connector); + } + drm_connector_list_iter_end(&conn_iter); + + drm_modeset_unlock_all(dev); + return 0; +} + +static int psb_power_down(struct drm_device *dev) +{ + return 0; +} + +static int psb_power_up(struct drm_device *dev) +{ + return 0; +} + +/* Poulsbo */ +static const struct psb_offset psb_regmap[2] = { + { + .fp0 = FPA0, + .fp1 = FPA1, + .cntr = DSPACNTR, + .conf = PIPEACONF, + .src = PIPEASRC, + .dpll = DPLL_A, + .htotal = HTOTAL_A, + .hblank = HBLANK_A, + .hsync = HSYNC_A, + .vtotal = VTOTAL_A, + .vblank = VBLANK_A, + .vsync = VSYNC_A, + .stride = DSPASTRIDE, + .size = DSPASIZE, + .pos = DSPAPOS, + .base = DSPABASE, + .surf = DSPASURF, + .addr = DSPABASE, + .status = PIPEASTAT, + .linoff = DSPALINOFF, + .tileoff = DSPATILEOFF, + .palette = PALETTE_A, + }, + { + .fp0 = FPB0, + .fp1 = FPB1, + .cntr = DSPBCNTR, + .conf = PIPEBCONF, + .src = PIPEBSRC, + .dpll = DPLL_B, + .htotal = HTOTAL_B, + .hblank = HBLANK_B, + .hsync = HSYNC_B, + .vtotal = VTOTAL_B, + .vblank = VBLANK_B, + .vsync = VSYNC_B, + .stride = DSPBSTRIDE, + .size = DSPBSIZE, + .pos = DSPBPOS, + .base = DSPBBASE, + .surf = DSPBSURF, + .addr = DSPBBASE, + .status = PIPEBSTAT, + .linoff = DSPBLINOFF, + .tileoff = DSPBTILEOFF, + .palette = PALETTE_B, + } +}; + +static int psb_chip_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + dev_priv->regmap = psb_regmap; + gma_get_core_freq(dev); + gma_intel_setup_gmbus(dev); + psb_intel_opregion_init(dev); + psb_intel_init_bios(dev); + return 0; +} + +static void psb_chip_teardown(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + psb_lid_timer_takedown(dev_priv); + gma_intel_teardown_gmbus(dev); +} + +const struct psb_ops psb_chip_ops = { + .name = "Poulsbo", + .pipes = 2, + .crtcs = 2, + .hdmi_mask = (1 << 0), + .lvds_mask = (1 << 1), + .sdvo_mask = (1 << 0), + .cursor_needs_phys = 1, + .sgx_offset = PSB_SGX_OFFSET, + .chip_setup = psb_chip_setup, + .chip_teardown = psb_chip_teardown, + + .crtc_helper = &psb_intel_helper_funcs, + .clock_funcs = &psb_clock_funcs, + + .output_init = psb_output_init, + + .backlight_init = psb_backlight_setup, + .backlight_set = psb_intel_lvds_set_brightness, + .backlight_name = "psb-bl", + + .init_pm = psb_init_pm, + .save_regs = psb_save_display_registers, + .restore_regs = psb_restore_display_registers, + .save_crtc = gma_crtc_save, + .restore_crtc = gma_crtc_restore, + .power_down = psb_power_down, + .power_up = psb_power_up, +}; + diff --git a/drivers/gpu/drm/gma500/psb_device.h b/drivers/gpu/drm/gma500/psb_device.h new file mode 100644 index 000000000..3f1117956 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_device.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright © 2013 Patrik Jakobsson + * Copyright © 2011 Intel Corporation + */ + +#ifndef _PSB_DEVICE_H_ +#define _PSB_DEVICE_H_ + +extern const struct gma_clock_funcs psb_clock_funcs; + +#endif diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c new file mode 100644 index 000000000..738eb558a --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_drv.c @@ -0,0 +1,526 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2007-2011, Intel Corporation. + * All Rights Reserved. + * Copyright (c) 2008, Tungsten Graphics, Inc. Cedar Park, TX., USA. + * All Rights Reserved. + * + **************************************************************************/ + +#include <linux/cpu.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/pm_runtime.h> +#include <linux/spinlock.h> +#include <linux/delay.h> + +#include <asm/set_memory.h> + +#include <acpi/video.h> + +#include <drm/drm.h> +#include <drm/drm_aperture.h> +#include <drm/drm_drv.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_file.h> +#include <drm/drm_ioctl.h> +#include <drm/drm_pciids.h> +#include <drm/drm_vblank.h> + +#include "framebuffer.h" +#include "gem.h" +#include "intel_bios.h" +#include "mid_bios.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_reg.h" +#include "psb_irq.h" +#include "psb_reg.h" + +static const struct drm_driver driver; +static int psb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent); + +/* + * The table below contains a mapping of the PCI vendor ID and the PCI Device ID + * to the different groups of PowerVR 5-series chip designs + * + * 0x8086 = Intel Corporation + * + * PowerVR SGX535 - Poulsbo - Intel GMA 500, Intel Atom Z5xx + * PowerVR SGX535 - Moorestown - Intel GMA 600 + * PowerVR SGX535 - Oaktrail - Intel GMA 600, Intel Atom Z6xx, E6xx + * PowerVR SGX545 - Cedartrail - Intel GMA 3600, Intel Atom D2500, N2600 + * PowerVR SGX545 - Cedartrail - Intel GMA 3650, Intel Atom D2550, D2700, + * N2800 + */ +static const struct pci_device_id pciidlist[] = { + /* Poulsbo */ + { 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops }, + { 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops }, + /* Oak Trail */ + { 0x8086, 0x4100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4107, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + { 0x8086, 0x4108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &oaktrail_chip_ops }, + /* Cedar Trail */ + { 0x8086, 0x0be0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0be9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0bea, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0beb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0bec, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0bed, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0bee, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0x8086, 0x0bef, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, pciidlist); + +/* + * Standard IOCTLs. + */ +static const struct drm_ioctl_desc psb_ioctls[] = { +}; + +/** + * psb_spank - reset the 2D engine + * @dev_priv: our PSB DRM device + * + * Soft reset the graphics engine and then reload the necessary registers. + */ +static void psb_spank(struct drm_psb_private *dev_priv) +{ + PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET | + _PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET | + _PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET | + _PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET); + PSB_RSGX32(PSB_CR_SOFT_RESET); + + msleep(1); + + PSB_WSGX32(0, PSB_CR_SOFT_RESET); + wmb(); + PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT, + PSB_CR_BIF_CTRL); + wmb(); + (void) PSB_RSGX32(PSB_CR_BIF_CTRL); + + msleep(1); + PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT, + PSB_CR_BIF_CTRL); + (void) PSB_RSGX32(PSB_CR_BIF_CTRL); + PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE); +} + +static int psb_do_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_gtt *pg = &dev_priv->gtt; + + uint32_t stolen_gtt; + + if (pg->mmu_gatt_start & 0x0FFFFFFF) { + dev_err(dev->dev, "Gatt must be 256M aligned. This is a bug.\n"); + return -EINVAL; + } + + stolen_gtt = (pg->stolen_size >> PAGE_SHIFT) * 4; + stolen_gtt = (stolen_gtt + PAGE_SIZE - 1) >> PAGE_SHIFT; + stolen_gtt = (stolen_gtt < pg->gtt_pages) ? stolen_gtt : pg->gtt_pages; + + dev_priv->gatt_free_offset = pg->mmu_gatt_start + + (stolen_gtt << PAGE_SHIFT) * 1024; + + spin_lock_init(&dev_priv->irqmask_lock); + + PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK0); + PSB_WSGX32(0x00000000, PSB_CR_BIF_BANK1); + PSB_RSGX32(PSB_CR_BIF_BANK1); + + /* Do not bypass any MMU access, let them pagefault instead */ + PSB_WSGX32((PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_MMU_ER_MASK), + PSB_CR_BIF_CTRL); + PSB_RSGX32(PSB_CR_BIF_CTRL); + + psb_spank(dev_priv); + + /* mmu_gatt ?? */ + PSB_WSGX32(pg->gatt_start, PSB_CR_BIF_TWOD_REQ_BASE); + PSB_RSGX32(PSB_CR_BIF_TWOD_REQ_BASE); /* Post */ + + return 0; +} + +static void psb_driver_unload(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + /* TODO: Kill vblank etc here */ + + gma_backlight_exit(dev); + psb_modeset_cleanup(dev); + + gma_irq_uninstall(dev); + + if (dev_priv->ops->chip_teardown) + dev_priv->ops->chip_teardown(dev); + + psb_intel_opregion_fini(dev); + + if (dev_priv->pf_pd) { + psb_mmu_free_pagedir(dev_priv->pf_pd); + dev_priv->pf_pd = NULL; + } + if (dev_priv->mmu) { + struct psb_gtt *pg = &dev_priv->gtt; + + psb_mmu_remove_pfn_sequence( + psb_mmu_get_default_pd + (dev_priv->mmu), + pg->mmu_gatt_start, + dev_priv->vram_stolen_size >> PAGE_SHIFT); + psb_mmu_driver_takedown(dev_priv->mmu); + dev_priv->mmu = NULL; + } + psb_gem_mm_fini(dev); + psb_gtt_fini(dev); + if (dev_priv->scratch_page) { + set_pages_wb(dev_priv->scratch_page, 1); + __free_page(dev_priv->scratch_page); + dev_priv->scratch_page = NULL; + } + if (dev_priv->vdc_reg) { + iounmap(dev_priv->vdc_reg); + dev_priv->vdc_reg = NULL; + } + if (dev_priv->sgx_reg) { + iounmap(dev_priv->sgx_reg); + dev_priv->sgx_reg = NULL; + } + if (dev_priv->aux_reg) { + iounmap(dev_priv->aux_reg); + dev_priv->aux_reg = NULL; + } + pci_dev_put(dev_priv->aux_pdev); + pci_dev_put(dev_priv->lpc_pdev); + + /* Destroy VBT data */ + psb_intel_destroy_bios(dev); + + gma_power_uninit(dev); +} + +static void psb_device_release(void *data) +{ + struct drm_device *dev = data; + + psb_driver_unload(dev); +} + +static int psb_driver_load(struct drm_device *dev, unsigned long flags) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned long resource_start, resource_len; + unsigned long irqflags; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + struct gma_encoder *gma_encoder; + struct psb_gtt *pg; + int ret = -ENOMEM; + + /* initializing driver private data */ + + dev_priv->ops = (struct psb_ops *)flags; + + pg = &dev_priv->gtt; + + pci_set_master(pdev); + + dev_priv->num_pipe = dev_priv->ops->pipes; + + resource_start = pci_resource_start(pdev, PSB_MMIO_RESOURCE); + + dev_priv->vdc_reg = + ioremap(resource_start + PSB_VDC_OFFSET, PSB_VDC_SIZE); + if (!dev_priv->vdc_reg) + goto out_err; + + dev_priv->sgx_reg = ioremap(resource_start + dev_priv->ops->sgx_offset, + PSB_SGX_SIZE); + if (!dev_priv->sgx_reg) + goto out_err; + + if (IS_MRST(dev)) { + int domain = pci_domain_nr(pdev->bus); + + dev_priv->aux_pdev = + pci_get_domain_bus_and_slot(domain, 0, + PCI_DEVFN(3, 0)); + + if (dev_priv->aux_pdev) { + resource_start = pci_resource_start(dev_priv->aux_pdev, + PSB_AUX_RESOURCE); + resource_len = pci_resource_len(dev_priv->aux_pdev, + PSB_AUX_RESOURCE); + dev_priv->aux_reg = ioremap(resource_start, + resource_len); + if (!dev_priv->aux_reg) + goto out_err; + + DRM_DEBUG_KMS("Found aux vdc"); + } else { + /* Couldn't find the aux vdc so map to primary vdc */ + dev_priv->aux_reg = dev_priv->vdc_reg; + DRM_DEBUG_KMS("Couldn't find aux pci device"); + } + dev_priv->gmbus_reg = dev_priv->aux_reg; + + dev_priv->lpc_pdev = + pci_get_domain_bus_and_slot(domain, 0, + PCI_DEVFN(31, 0)); + if (dev_priv->lpc_pdev) { + pci_read_config_word(dev_priv->lpc_pdev, PSB_LPC_GBA, + &dev_priv->lpc_gpio_base); + pci_write_config_dword(dev_priv->lpc_pdev, PSB_LPC_GBA, + (u32)dev_priv->lpc_gpio_base | (1L<<31)); + pci_read_config_word(dev_priv->lpc_pdev, PSB_LPC_GBA, + &dev_priv->lpc_gpio_base); + dev_priv->lpc_gpio_base &= 0xffc0; + if (dev_priv->lpc_gpio_base) + DRM_DEBUG_KMS("Found LPC GPIO at 0x%04x\n", + dev_priv->lpc_gpio_base); + else { + pci_dev_put(dev_priv->lpc_pdev); + dev_priv->lpc_pdev = NULL; + } + } + } else { + dev_priv->gmbus_reg = dev_priv->vdc_reg; + } + + psb_intel_opregion_setup(dev); + + ret = dev_priv->ops->chip_setup(dev); + if (ret) + goto out_err; + + /* Init OSPM support */ + gma_power_init(dev); + + ret = -ENOMEM; + + dev_priv->scratch_page = alloc_page(GFP_DMA32 | __GFP_ZERO); + if (!dev_priv->scratch_page) + goto out_err; + + set_pages_uc(dev_priv->scratch_page, 1); + + ret = psb_gtt_init(dev); + if (ret) + goto out_err; + ret = psb_gem_mm_init(dev); + if (ret) + goto out_err; + + ret = -ENOMEM; + + dev_priv->mmu = psb_mmu_driver_init(dev, 1, 0, NULL); + if (!dev_priv->mmu) + goto out_err; + + dev_priv->pf_pd = psb_mmu_alloc_pd(dev_priv->mmu, 1, 0); + if (!dev_priv->pf_pd) + goto out_err; + + ret = psb_do_init(dev); + if (ret) + return ret; + + /* Add stolen memory to SGX MMU */ + ret = psb_mmu_insert_pfn_sequence(psb_mmu_get_default_pd(dev_priv->mmu), + dev_priv->stolen_base >> PAGE_SHIFT, + pg->gatt_start, + pg->stolen_size >> PAGE_SHIFT, 0); + + psb_mmu_set_pd_context(psb_mmu_get_default_pd(dev_priv->mmu), 0); + psb_mmu_set_pd_context(dev_priv->pf_pd, 1); + + PSB_WSGX32(0x20000000, PSB_CR_PDS_EXEC_BASE); + PSB_WSGX32(0x30000000, PSB_CR_BIF_3D_REQ_BASE); + + acpi_video_register(); + + /* Setup vertical blanking handling */ + ret = drm_vblank_init(dev, dev_priv->num_pipe); + if (ret) + goto out_err; + + /* + * Install interrupt handlers prior to powering off SGX or else we will + * crash. + */ + dev_priv->vdc_irq_mask = 0; + dev_priv->pipestat[0] = 0; + dev_priv->pipestat[1] = 0; + dev_priv->pipestat[2] = 0; + spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); + PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); + PSB_WVDC32(0x00000000, PSB_INT_ENABLE_R); + PSB_WVDC32(0xFFFFFFFF, PSB_INT_MASK_R); + spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); + + gma_irq_install(dev); + + dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ + + psb_modeset_init(dev); + psb_fbdev_init(dev); + drm_kms_helper_poll_init(dev); + + /* Only add backlight support if we have LVDS or MIPI output */ + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + gma_encoder = gma_attached_encoder(connector); + + if (gma_encoder->type == INTEL_OUTPUT_LVDS || + gma_encoder->type == INTEL_OUTPUT_MIPI) { + ret = gma_backlight_init(dev); + if (ret == 0) + acpi_video_register_backlight(); + break; + } + } + drm_connector_list_iter_end(&conn_iter); + + if (ret) + return ret; + psb_intel_opregion_enable_asle(dev); + + return devm_add_action_or_reset(dev->dev, psb_device_release, dev); + +out_err: + psb_driver_unload(dev); + return ret; +} + +static int psb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct drm_psb_private *dev_priv; + struct drm_device *dev; + int ret; + + /* + * We cannot yet easily find the framebuffer's location in memory. So + * remove all framebuffers here. Note that we still want the pci special + * handling to kick out vgacon. + * + * TODO: Refactor psb_driver_load() to map vdc_reg earlier. Then we + * might be able to read the framebuffer range from the device. + */ + ret = drm_aperture_remove_framebuffers(&driver); + if (ret) + return ret; + + ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &driver); + if (ret) + return ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + dev_priv = devm_drm_dev_alloc(&pdev->dev, &driver, struct drm_psb_private, dev); + if (IS_ERR(dev_priv)) + return PTR_ERR(dev_priv); + dev = &dev_priv->dev; + + pci_set_drvdata(pdev, dev); + + ret = psb_driver_load(dev, ent->driver_data); + if (ret) + return ret; + + ret = drm_dev_register(dev, ent->driver_data); + if (ret) + return ret; + + return 0; +} + +static void psb_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); +} + +static DEFINE_RUNTIME_DEV_PM_OPS(psb_pm_ops, gma_power_suspend, gma_power_resume, NULL); + +static const struct file_operations psb_gem_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, + .compat_ioctl = drm_compat_ioctl, + .mmap = drm_gem_mmap, + .poll = drm_poll, + .read = drm_read, +}; + +static const struct drm_driver driver = { + .driver_features = DRIVER_MODESET | DRIVER_GEM, + .lastclose = drm_fb_helper_lastclose, + + .num_ioctls = ARRAY_SIZE(psb_ioctls), + + .dumb_create = psb_gem_dumb_create, + .ioctls = psb_ioctls, + .fops = &psb_gem_fops, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL +}; + +static struct pci_driver psb_pci_driver = { + .name = DRIVER_NAME, + .id_table = pciidlist, + .probe = psb_pci_probe, + .remove = psb_pci_remove, + .driver.pm = &psb_pm_ops, +}; + +static int __init psb_init(void) +{ + if (drm_firmware_drivers_only()) + return -ENODEV; + + return pci_register_driver(&psb_pci_driver); +} + +static void __exit psb_exit(void) +{ + pci_unregister_driver(&psb_pci_driver); +} + +late_initcall(psb_init); +module_exit(psb_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h new file mode 100644 index 000000000..52f9ed3c2 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_drv.h @@ -0,0 +1,737 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2007-2011, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#ifndef _PSB_DRV_H_ +#define _PSB_DRV_H_ + +#include <linux/kref.h> +#include <linux/mm_types.h> + +#include <drm/drm_device.h> + +#include "gtt.h" +#include "intel_bios.h" +#include "mmu.h" +#include "oaktrail.h" +#include "opregion.h" +#include "power.h" +#include "psb_intel_drv.h" +#include "psb_reg.h" + +#define DRIVER_AUTHOR "Alan Cox <alan@linux.intel.com> and others" + +#define DRIVER_NAME "gma500" +#define DRIVER_DESC "DRM driver for the Intel GMA500, GMA600, GMA3600, GMA3650" +#define DRIVER_DATE "20140314" + +#define DRIVER_MAJOR 1 +#define DRIVER_MINOR 0 +#define DRIVER_PATCHLEVEL 0 + +/* Append new drm mode definition here, align with libdrm definition */ +#define DRM_MODE_SCALE_NO_SCALE 2 + +#define IS_PSB(drm) ((to_pci_dev((drm)->dev)->device & 0xfffe) == 0x8108) +#define IS_MRST(drm) ((to_pci_dev((drm)->dev)->device & 0xfff0) == 0x4100) +#define IS_CDV(drm) ((to_pci_dev((drm)->dev)->device & 0xfff0) == 0x0be0) + +/* Hardware offsets */ +#define PSB_VDC_OFFSET 0x00000000 +#define PSB_VDC_SIZE 0x000080000 +#define MRST_MMIO_SIZE 0x0000C0000 +#define PSB_SGX_SIZE 0x8000 +#define PSB_SGX_OFFSET 0x00040000 +#define MRST_SGX_OFFSET 0x00080000 + +/* PCI resource identifiers */ +#define PSB_MMIO_RESOURCE 0 +#define PSB_AUX_RESOURCE 0 +#define PSB_GATT_RESOURCE 2 +#define PSB_GTT_RESOURCE 3 + +/* PCI configuration */ +#define PSB_GMCH_CTRL 0x52 +#define PSB_BSM 0x5C +#define _PSB_GMCH_ENABLED 0x4 +#define PSB_PGETBL_CTL 0x2020 +#define _PSB_PGETBL_ENABLED 0x00000001 +#define PSB_SGX_2D_SLAVE_PORT 0x4000 +#define PSB_LPC_GBA 0x44 + +/* TODO: To get rid of */ +#define PSB_TT_PRIV0_LIMIT (256*1024*1024) +#define PSB_TT_PRIV0_PLIMIT (PSB_TT_PRIV0_LIMIT >> PAGE_SHIFT) + +/* SGX side MMU definitions (these can probably go) */ + +/* Flags for external memory type field */ +#define PSB_MMU_CACHED_MEMORY 0x0001 /* Bind to MMU only */ +#define PSB_MMU_RO_MEMORY 0x0002 /* MMU RO memory */ +#define PSB_MMU_WO_MEMORY 0x0004 /* MMU WO memory */ + +/* PTE's and PDE's */ +#define PSB_PDE_MASK 0x003FFFFF +#define PSB_PDE_SHIFT 22 +#define PSB_PTE_SHIFT 12 + +/* Cache control */ +#define PSB_PTE_VALID 0x0001 /* PTE / PDE valid */ +#define PSB_PTE_WO 0x0002 /* Write only */ +#define PSB_PTE_RO 0x0004 /* Read only */ +#define PSB_PTE_CACHED 0x0008 /* CPU cache coherent */ + +/* VDC registers and bits */ +#define PSB_MSVDX_CLOCKGATING 0x2064 +#define PSB_TOPAZ_CLOCKGATING 0x2068 +#define PSB_HWSTAM 0x2098 +#define PSB_INSTPM 0x20C0 +#define PSB_INT_IDENTITY_R 0x20A4 +#define _PSB_IRQ_ASLE (1<<0) +#define _MDFLD_PIPEC_EVENT_FLAG (1<<2) +#define _MDFLD_PIPEC_VBLANK_FLAG (1<<3) +#define _PSB_DPST_PIPEB_FLAG (1<<4) +#define _MDFLD_PIPEB_EVENT_FLAG (1<<4) +#define _PSB_VSYNC_PIPEB_FLAG (1<<5) +#define _PSB_DPST_PIPEA_FLAG (1<<6) +#define _PSB_PIPEA_EVENT_FLAG (1<<6) +#define _PSB_VSYNC_PIPEA_FLAG (1<<7) +#define _PSB_IRQ_DISP_HOTSYNC (1<<17) +#define _PSB_IRQ_SGX_FLAG (1<<18) +#define _PSB_IRQ_MSVDX_FLAG (1<<19) +#define _LNC_IRQ_TOPAZ_FLAG (1<<20) + +#define _PSB_PIPE_EVENT_FLAG (_PSB_VSYNC_PIPEA_FLAG | \ + _PSB_VSYNC_PIPEB_FLAG) + +#define PSB_INT_IDENTITY_R 0x20A4 +#define PSB_INT_MASK_R 0x20A8 +#define PSB_INT_ENABLE_R 0x20A0 + +#define _PSB_MMU_ER_MASK 0x0001FF00 +#define _PSB_MMU_ER_HOST (1 << 16) +#define GPIOA 0x5010 +#define GPIOB 0x5014 +#define GPIOC 0x5018 +#define GPIOD 0x501c +#define GPIOE 0x5020 +#define GPIOF 0x5024 +#define GPIOG 0x5028 +#define GPIOH 0x502c +#define GPIO_CLOCK_DIR_MASK (1 << 0) +#define GPIO_CLOCK_DIR_IN (0 << 1) +#define GPIO_CLOCK_DIR_OUT (1 << 1) +#define GPIO_CLOCK_VAL_MASK (1 << 2) +#define GPIO_CLOCK_VAL_OUT (1 << 3) +#define GPIO_CLOCK_VAL_IN (1 << 4) +#define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) +#define GPIO_DATA_DIR_MASK (1 << 8) +#define GPIO_DATA_DIR_IN (0 << 9) +#define GPIO_DATA_DIR_OUT (1 << 9) +#define GPIO_DATA_VAL_MASK (1 << 10) +#define GPIO_DATA_VAL_OUT (1 << 11) +#define GPIO_DATA_VAL_IN (1 << 12) +#define GPIO_DATA_PULLUP_DISABLE (1 << 13) + +#define VCLK_DIVISOR_VGA0 0x6000 +#define VCLK_DIVISOR_VGA1 0x6004 +#define VCLK_POST_DIV 0x6010 + +#define PSB_COMM_2D (PSB_ENGINE_2D << 4) +#define PSB_COMM_3D (PSB_ENGINE_3D << 4) +#define PSB_COMM_TA (PSB_ENGINE_TA << 4) +#define PSB_COMM_HP (PSB_ENGINE_HP << 4) +#define PSB_COMM_USER_IRQ (1024 >> 2) +#define PSB_COMM_USER_IRQ_LOST (PSB_COMM_USER_IRQ + 1) +#define PSB_COMM_FW (2048 >> 2) + +#define PSB_UIRQ_VISTEST 1 +#define PSB_UIRQ_OOM_REPLY 2 +#define PSB_UIRQ_FIRE_TA_REPLY 3 +#define PSB_UIRQ_FIRE_RASTER_REPLY 4 + +#define PSB_2D_SIZE (256*1024*1024) +#define PSB_MAX_RELOC_PAGES 1024 + +#define PSB_LOW_REG_OFFS 0x0204 +#define PSB_HIGH_REG_OFFS 0x0600 + +#define PSB_NUM_VBLANKS 2 + + +#define PSB_2D_SIZE (256*1024*1024) +#define PSB_MAX_RELOC_PAGES 1024 + +#define PSB_LOW_REG_OFFS 0x0204 +#define PSB_HIGH_REG_OFFS 0x0600 + +#define PSB_NUM_VBLANKS 2 +#define PSB_WATCHDOG_DELAY (HZ * 2) +#define PSB_LID_DELAY (HZ / 10) + +#define PSB_MAX_BRIGHTNESS 100 + +#define PSB_PWR_STATE_ON 1 +#define PSB_PWR_STATE_OFF 2 + +#define PSB_PMPOLICY_NOPM 0 +#define PSB_PMPOLICY_CLOCKGATING 1 +#define PSB_PMPOLICY_POWERDOWN 2 + +#define PSB_PMSTATE_POWERUP 0 +#define PSB_PMSTATE_CLOCKGATED 1 +#define PSB_PMSTATE_POWERDOWN 2 +#define PSB_PCIx_MSI_ADDR_LOC 0x94 +#define PSB_PCIx_MSI_DATA_LOC 0x98 + +/* Medfield crystal settings */ +#define KSEL_CRYSTAL_19 1 +#define KSEL_BYPASS_19 5 +#define KSEL_BYPASS_25 6 +#define KSEL_BYPASS_83_100 7 + +struct drm_fb_helper; + +struct opregion_header; +struct opregion_acpi; +struct opregion_swsci; +struct opregion_asle; + +struct psb_intel_opregion { + struct opregion_header *header; + struct opregion_acpi *acpi; + struct opregion_swsci *swsci; + struct opregion_asle *asle; + void *vbt; + u32 __iomem *lid_state; + struct work_struct asle_work; +}; + +struct sdvo_device_mapping { + u8 initialized; + u8 dvo_port; + u8 slave_addr; + u8 dvo_wiring; + u8 i2c_pin; + u8 i2c_speed; + u8 ddc_pin; +}; + +struct intel_gmbus { + struct i2c_adapter adapter; + struct i2c_adapter *force_bit; + u32 reg0; +}; + +/* Register offset maps */ +struct psb_offset { + u32 fp0; + u32 fp1; + u32 cntr; + u32 conf; + u32 src; + u32 dpll; + u32 dpll_md; + u32 htotal; + u32 hblank; + u32 hsync; + u32 vtotal; + u32 vblank; + u32 vsync; + u32 stride; + u32 size; + u32 pos; + u32 surf; + u32 addr; + u32 base; + u32 status; + u32 linoff; + u32 tileoff; + u32 palette; +}; + +/* + * Register save state. This is used to hold the context when the + * device is powered off. In the case of Oaktrail this can (but does not + * yet) include screen blank. Operations occuring during the save + * update the register cache instead. + */ + +/* Common status for pipes */ +struct psb_pipe { + u32 fp0; + u32 fp1; + u32 cntr; + u32 conf; + u32 src; + u32 dpll; + u32 dpll_md; + u32 htotal; + u32 hblank; + u32 hsync; + u32 vtotal; + u32 vblank; + u32 vsync; + u32 stride; + u32 size; + u32 pos; + u32 base; + u32 surf; + u32 addr; + u32 status; + u32 linoff; + u32 tileoff; + u32 palette[256]; +}; + +struct psb_state { + uint32_t saveVCLK_DIVISOR_VGA0; + uint32_t saveVCLK_DIVISOR_VGA1; + uint32_t saveVCLK_POST_DIV; + uint32_t saveVGACNTRL; + uint32_t saveADPA; + uint32_t saveLVDS; + uint32_t saveDVOA; + uint32_t saveDVOB; + uint32_t saveDVOC; + uint32_t savePP_ON; + uint32_t savePP_OFF; + uint32_t savePP_CONTROL; + uint32_t savePP_CYCLE; + uint32_t savePFIT_CONTROL; + uint32_t saveCLOCKGATING; + uint32_t saveDSPARB; + uint32_t savePFIT_AUTO_RATIOS; + uint32_t savePFIT_PGM_RATIOS; + uint32_t savePP_ON_DELAYS; + uint32_t savePP_OFF_DELAYS; + uint32_t savePP_DIVISOR; + uint32_t saveBCLRPAT_A; + uint32_t saveBCLRPAT_B; + uint32_t savePERF_MODE; + uint32_t saveDSPFW1; + uint32_t saveDSPFW2; + uint32_t saveDSPFW3; + uint32_t saveDSPFW4; + uint32_t saveDSPFW5; + uint32_t saveDSPFW6; + uint32_t saveCHICKENBIT; + uint32_t saveDSPACURSOR_CTRL; + uint32_t saveDSPBCURSOR_CTRL; + uint32_t saveDSPACURSOR_BASE; + uint32_t saveDSPBCURSOR_BASE; + uint32_t saveDSPACURSOR_POS; + uint32_t saveDSPBCURSOR_POS; + uint32_t saveOV_OVADD; + uint32_t saveOV_OGAMC0; + uint32_t saveOV_OGAMC1; + uint32_t saveOV_OGAMC2; + uint32_t saveOV_OGAMC3; + uint32_t saveOV_OGAMC4; + uint32_t saveOV_OGAMC5; + uint32_t saveOVC_OVADD; + uint32_t saveOVC_OGAMC0; + uint32_t saveOVC_OGAMC1; + uint32_t saveOVC_OGAMC2; + uint32_t saveOVC_OGAMC3; + uint32_t saveOVC_OGAMC4; + uint32_t saveOVC_OGAMC5; + + /* DPST register save */ + uint32_t saveHISTOGRAM_INT_CONTROL_REG; + uint32_t saveHISTOGRAM_LOGIC_CONTROL_REG; + uint32_t savePWM_CONTROL_LOGIC; +}; + +struct cdv_state { + uint32_t saveDSPCLK_GATE_D; + uint32_t saveRAMCLK_GATE_D; + uint32_t saveDSPARB; + uint32_t saveDSPFW[6]; + uint32_t saveADPA; + uint32_t savePP_CONTROL; + uint32_t savePFIT_PGM_RATIOS; + uint32_t saveLVDS; + uint32_t savePFIT_CONTROL; + uint32_t savePP_ON_DELAYS; + uint32_t savePP_OFF_DELAYS; + uint32_t savePP_CYCLE; + uint32_t saveVGACNTRL; + uint32_t saveIER; + uint32_t saveIMR; + u8 saveLBB; +}; + +struct psb_save_area { + struct psb_pipe pipe[3]; + uint32_t saveBSM; + uint32_t saveVBT; + union { + struct psb_state psb; + struct cdv_state cdv; + }; + uint32_t saveBLC_PWM_CTL2; + uint32_t saveBLC_PWM_CTL; +}; + +struct psb_ops; + +#define PSB_NUM_PIPE 3 + +struct intel_scu_ipc_dev; + +struct drm_psb_private { + struct drm_device dev; + + struct pci_dev *aux_pdev; /* Currently only used by mrst */ + struct pci_dev *lpc_pdev; /* Currently only used by mrst */ + const struct psb_ops *ops; + const struct psb_offset *regmap; + + struct child_device_config *child_dev; + int child_dev_num; + + struct psb_gtt gtt; + + /* GTT Memory manager */ + struct psb_gtt_mm *gtt_mm; + struct page *scratch_page; + u32 __iomem *gtt_map; + uint32_t stolen_base; + u8 __iomem *vram_addr; + unsigned long vram_stolen_size; + u16 gmch_ctrl; /* Saved GTT setup */ + u32 pge_ctl; + + struct mutex gtt_mutex; + struct resource *gtt_mem; /* Our PCI resource */ + + struct mutex mmap_mutex; + + struct psb_mmu_driver *mmu; + struct psb_mmu_pd *pf_pd; + + /* Register base */ + uint8_t __iomem *sgx_reg; + uint8_t __iomem *vdc_reg; + uint8_t __iomem *aux_reg; /* Auxillary vdc pipe regs */ + uint16_t lpc_gpio_base; + uint32_t gatt_free_offset; + + /* Fencing / irq */ + uint32_t vdc_irq_mask; + uint32_t pipestat[PSB_NUM_PIPE]; + + spinlock_t irqmask_lock; + bool irq_enabled; + + /* Power */ + bool pm_initialized; + + /* Modesetting */ + struct psb_intel_mode_device mode_dev; + bool modeset; /* true if we have done the mode_device setup */ + + struct drm_crtc *plane_to_crtc_mapping[PSB_NUM_PIPE]; + struct drm_crtc *pipe_to_crtc_mapping[PSB_NUM_PIPE]; + uint32_t num_pipe; + + /* OSPM info (Power management base) (TODO: can go ?) */ + uint32_t ospm_base; + + /* Sizes info */ + u32 fuse_reg_value; + u32 video_device_fuse; + + /* PCI revision ID for B0:D2:F0 */ + uint8_t platform_rev_id; + + /* gmbus */ + struct intel_gmbus *gmbus; + uint8_t __iomem *gmbus_reg; + + /* Used by SDVO */ + int crt_ddc_pin; + /* FIXME: The mappings should be parsed from bios but for now we can + pretend there are no mappings available */ + struct sdvo_device_mapping sdvo_mappings[2]; + u32 hotplug_supported_mask; + struct drm_property *broadcast_rgb_property; + struct drm_property *force_audio_property; + + /* LVDS info */ + int backlight_duty_cycle; /* restore backlight to this value */ + bool panel_wants_dither; + struct drm_display_mode *panel_fixed_mode; + struct drm_display_mode *lfp_lvds_vbt_mode; + struct drm_display_mode *sdvo_lvds_vbt_mode; + + struct bdb_lvds_backlight *lvds_bl; /* LVDS backlight info from VBT */ + struct gma_i2c_chan *lvds_i2c_bus; /* FIXME: Remove this? */ + + /* Feature bits from the VBIOS */ + unsigned int int_tv_support:1; + unsigned int lvds_dither:1; + unsigned int lvds_vbt:1; + unsigned int int_crt_support:1; + unsigned int lvds_use_ssc:1; + int lvds_ssc_freq; + bool is_lvds_on; + bool is_mipi_on; + bool lvds_enabled_in_vbt; + u32 mipi_ctrl_display; + + unsigned int core_freq; + uint32_t iLVDS_enable; + + /* MID specific */ + bool use_msi; + bool has_gct; + struct oaktrail_gct_data gct_data; + + /* Oaktrail HDMI state */ + struct oaktrail_hdmi_dev *hdmi_priv; + + /* Register state */ + struct psb_save_area regs; + + /* Hotplug handling */ + struct work_struct hotplug_work; + + /* LID-Switch */ + spinlock_t lid_lock; + struct timer_list lid_timer; + struct psb_intel_opregion opregion; + u32 lid_last_state; + + /* Watchdog */ + uint32_t apm_reg; + uint16_t apm_base; + + /* + * Used for modifying backlight from + * xrandr -- consider removing and using HAL instead + */ + struct intel_scu_ipc_dev *scu; + struct backlight_device *backlight_device; + struct drm_property *backlight_property; + bool backlight_enabled; + int backlight_level; + uint32_t blc_adj1; + uint32_t blc_adj2; + + struct drm_fb_helper *fb_helper; + + bool dsr_enable; + u32 dsr_fb_update; + bool dpi_panel_on[3]; + void *dsi_configs[2]; + u32 bpp; + u32 bpp2; + + u32 pipeconf[3]; + u32 dspcntr[3]; + + bool dplla_96mhz; /* DPLL data from the VBT */ + + struct { + int rate; + int lanes; + int preemphasis; + int vswing; + + bool initialized; + bool support; + int bpp; + struct edp_power_seq pps; + } edp; + uint8_t panel_type; +}; + +static inline struct drm_psb_private *to_drm_psb_private(struct drm_device *dev) +{ + return container_of(dev, struct drm_psb_private, dev); +} + +/* Operations for each board type */ +struct psb_ops { + const char *name; + int pipes; /* Number of output pipes */ + int crtcs; /* Number of CRTCs */ + int sgx_offset; /* Base offset of SGX device */ + int hdmi_mask; /* Mask of HDMI CRTCs */ + int lvds_mask; /* Mask of LVDS CRTCs */ + int sdvo_mask; /* Mask of SDVO CRTCs */ + int cursor_needs_phys; /* If cursor base reg need physical address */ + + /* Sub functions */ + struct drm_crtc_helper_funcs const *crtc_helper; + const struct gma_clock_funcs *clock_funcs; + + /* Setup hooks */ + int (*chip_setup)(struct drm_device *dev); + void (*chip_teardown)(struct drm_device *dev); + /* Optional helper caller after modeset */ + void (*errata)(struct drm_device *dev); + + /* Display management hooks */ + int (*output_init)(struct drm_device *dev); + int (*hotplug)(struct drm_device *dev); + void (*hotplug_enable)(struct drm_device *dev, bool on); + /* Power management hooks */ + void (*init_pm)(struct drm_device *dev); + int (*save_regs)(struct drm_device *dev); + int (*restore_regs)(struct drm_device *dev); + void (*save_crtc)(struct drm_crtc *crtc); + void (*restore_crtc)(struct drm_crtc *crtc); + int (*power_up)(struct drm_device *dev); + int (*power_down)(struct drm_device *dev); + void (*update_wm)(struct drm_device *dev, struct drm_crtc *crtc); + void (*disable_sr)(struct drm_device *dev); + + void (*lvds_bl_power)(struct drm_device *dev, bool on); + + /* Backlight */ + int (*backlight_init)(struct drm_device *dev); + void (*backlight_set)(struct drm_device *dev, int level); + int (*backlight_get)(struct drm_device *dev); + const char *backlight_name; + + int i2c_bus; /* I2C bus identifier for Moorestown */ +}; + +/* psb_lid.c */ +extern void psb_lid_timer_init(struct drm_psb_private *dev_priv); +extern void psb_lid_timer_takedown(struct drm_psb_private *dev_priv); + +/* modesetting */ +extern void psb_modeset_init(struct drm_device *dev); +extern void psb_modeset_cleanup(struct drm_device *dev); +extern int psb_fbdev_init(struct drm_device *dev); + +/* backlight.c */ +int gma_backlight_init(struct drm_device *dev); +void gma_backlight_exit(struct drm_device *dev); +void gma_backlight_disable(struct drm_device *dev); +void gma_backlight_enable(struct drm_device *dev); +void gma_backlight_set(struct drm_device *dev, int v); + +/* oaktrail_crtc.c */ +extern const struct drm_crtc_helper_funcs oaktrail_helper_funcs; + +/* oaktrail_lvds.c */ +extern void oaktrail_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev); + +/* psb_intel_display.c */ +extern const struct drm_crtc_helper_funcs psb_intel_helper_funcs; + +/* psb_intel_lvds.c */ +extern const struct drm_connector_helper_funcs + psb_intel_lvds_connector_helper_funcs; +extern const struct drm_connector_funcs psb_intel_lvds_connector_funcs; + +/* gem.c */ +extern int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args); + +/* psb_device.c */ +extern const struct psb_ops psb_chip_ops; + +/* oaktrail_device.c */ +extern const struct psb_ops oaktrail_chip_ops; + +/* cdv_device.c */ +extern const struct psb_ops cdv_chip_ops; + +/* Utilities */ +static inline uint32_t REGISTER_READ(struct drm_device *dev, uint32_t reg) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + return ioread32(dev_priv->vdc_reg + reg); +} + +static inline uint32_t REGISTER_READ_AUX(struct drm_device *dev, uint32_t reg) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + return ioread32(dev_priv->aux_reg + reg); +} + +#define REG_READ(reg) REGISTER_READ(dev, (reg)) +#define REG_READ_AUX(reg) REGISTER_READ_AUX(dev, (reg)) + +/* Useful for post reads */ +static inline uint32_t REGISTER_READ_WITH_AUX(struct drm_device *dev, + uint32_t reg, int aux) +{ + uint32_t val; + + if (aux) + val = REG_READ_AUX(reg); + else + val = REG_READ(reg); + + return val; +} + +#define REG_READ_WITH_AUX(reg, aux) REGISTER_READ_WITH_AUX(dev, (reg), (aux)) + +static inline void REGISTER_WRITE(struct drm_device *dev, uint32_t reg, + uint32_t val) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + iowrite32((val), dev_priv->vdc_reg + (reg)); +} + +static inline void REGISTER_WRITE_AUX(struct drm_device *dev, uint32_t reg, + uint32_t val) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + iowrite32((val), dev_priv->aux_reg + (reg)); +} + +#define REG_WRITE(reg, val) REGISTER_WRITE(dev, (reg), (val)) +#define REG_WRITE_AUX(reg, val) REGISTER_WRITE_AUX(dev, (reg), (val)) + +static inline void REGISTER_WRITE_WITH_AUX(struct drm_device *dev, uint32_t reg, + uint32_t val, int aux) +{ + if (aux) + REG_WRITE_AUX(reg, val); + else + REG_WRITE(reg, val); +} + +#define REG_WRITE_WITH_AUX(reg, val, aux) REGISTER_WRITE_WITH_AUX(dev, (reg), (val), (aux)) + +static inline void REGISTER_WRITE16(struct drm_device *dev, + uint32_t reg, uint32_t val) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + iowrite16((val), dev_priv->vdc_reg + (reg)); +} + +#define REG_WRITE16(reg, val) REGISTER_WRITE16(dev, (reg), (val)) + +static inline void REGISTER_WRITE8(struct drm_device *dev, + uint32_t reg, uint32_t val) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + iowrite8((val), dev_priv->vdc_reg + (reg)); +} + +#define REG_WRITE8(reg, val) REGISTER_WRITE8(dev, (reg), (val)) + +#define PSB_WVDC32(_val, _offs) iowrite32(_val, dev_priv->vdc_reg + (_offs)) +#define PSB_RVDC32(_offs) ioread32(dev_priv->vdc_reg + (_offs)) + +#define PSB_RSGX32(_offs) ioread32(dev_priv->sgx_reg + (_offs)) +#define PSB_WSGX32(_val, _offs) iowrite32(_val, dev_priv->sgx_reg + (_offs)) + +#define PSB_WMSVDX32(_val, _offs) iowrite32(_val, dev_priv->msvdx_reg + (_offs)) +#define PSB_RMSVDX32(_offs) ioread32(dev_priv->msvdx_reg + (_offs)) + +#endif diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c new file mode 100644 index 000000000..531c1781a --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -0,0 +1,555 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2006-2011 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/delay.h> +#include <linux/i2c.h> + +#include "framebuffer.h" +#include "gem.h" +#include "gma_display.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +#define INTEL_LIMIT_I9XX_SDVO_DAC 0 +#define INTEL_LIMIT_I9XX_LVDS 1 + +static const struct gma_limit_t psb_intel_limits[] = { + { /* INTEL_LIMIT_I9XX_SDVO_DAC */ + .dot = {.min = 20000, .max = 400000}, + .vco = {.min = 1400000, .max = 2800000}, + .n = {.min = 1, .max = 6}, + .m = {.min = 70, .max = 120}, + .m1 = {.min = 8, .max = 18}, + .m2 = {.min = 3, .max = 7}, + .p = {.min = 5, .max = 80}, + .p1 = {.min = 1, .max = 8}, + .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 5}, + .find_pll = gma_find_best_pll, + }, + { /* INTEL_LIMIT_I9XX_LVDS */ + .dot = {.min = 20000, .max = 400000}, + .vco = {.min = 1400000, .max = 2800000}, + .n = {.min = 1, .max = 6}, + .m = {.min = 70, .max = 120}, + .m1 = {.min = 8, .max = 18}, + .m2 = {.min = 3, .max = 7}, + .p = {.min = 7, .max = 98}, + .p1 = {.min = 1, .max = 8}, + /* The single-channel range is 25-112Mhz, and dual-channel + * is 80-224Mhz. Prefer single channel as much as possible. + */ + .p2 = {.dot_limit = 112000, .p2_slow = 14, .p2_fast = 7}, + .find_pll = gma_find_best_pll, + }, +}; + +static const struct gma_limit_t *psb_intel_limit(struct drm_crtc *crtc, + int refclk) +{ + const struct gma_limit_t *limit; + + if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS]; + else + limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + return limit; +} + +static void psb_intel_clock(int refclk, struct gma_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +/* + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int psb_intel_panel_fitter_pipe(struct drm_device *dev) +{ + u32 pfit_control; + + pfit_control = REG_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + /* Must be on PIPE 1 for PSB */ + return 1; +} + +static int psb_intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + int refclk; + struct gma_clock_t clock; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false; + bool is_lvds = false, is_tv = false; + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + const struct gma_limit_t *limit; + + /* No scan out no play */ + if (crtc->primary->fb == NULL) { + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + return 0; + } + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + + if (!connector->encoder + || connector->encoder->crtc != crtc) + continue; + + switch (gma_encoder->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + } + + break; + } + drm_connector_list_iter_end(&conn_iter); + + refclk = 96000; + + limit = gma_crtc->clock_funcs->limit(crtc, refclk); + + ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, + &clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d", + adjusted_mode->clock, clock.dot); + return 0; + } + + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + + dpll = DPLL_VGA_MODE_DIS; + if (is_lvds) { + dpll |= DPLLB_MODE_LVDS; + dpll |= DPLL_DVO_HIGH_SPEED; + } else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) { + int sdvo_pixel_multiply = + adjusted_mode->clock / mode->clock; + dpll |= DPLL_DVO_HIGH_SPEED; + dpll |= + (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 1)) << 16; + switch (clock.p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + + if (is_tv) { + /* XXX: just matching BIOS for now */ +/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + } + dpll |= PLL_REF_INPUT_DREFCLK; + + /* setup pipeconf */ + pipeconf = REG_READ(map->conf); + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + dspcntr |= DISPLAY_PLANE_ENABLE; + pipeconf |= PIPEACONF_ENABLE; + dpll |= DPLL_VCO_ENABLE; + + + /* Disable the panel fitter if it was on our pipe */ + if (psb_intel_panel_fitter_pipe(dev) == pipe) + REG_WRITE(PFIT_CONTROL, 0); + + drm_mode_debug_printmodeline(mode); + + if (dpll & DPLL_VCO_ENABLE) { + REG_WRITE(map->fp0, fp); + REG_WRITE(map->dpll, dpll & ~DPLL_VCO_ENABLE); + REG_READ(map->dpll); + udelay(150); + } + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + u32 lvds = REG_READ(LVDS); + + lvds &= ~LVDS_PIPEB_SELECT; + if (pipe == 1) + lvds |= LVDS_PIPEB_SELECT; + + lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + /* Set the B0-B3 data pairs corresponding to + * whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + if (clock.p2 == 7) + lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more + * thoroughly into how panels behave in the two modes. + */ + + REG_WRITE(LVDS, lvds); + REG_READ(LVDS); + } + + REG_WRITE(map->fp0, fp); + REG_WRITE(map->dpll, dpll); + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + + /* write it again -- the BIOS does, after all */ + REG_WRITE(map->dpll, dpll); + + REG_READ(map->dpll); + /* Wait for the clocks to stabilize. */ + udelay(150); + + REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. + */ + REG_WRITE(map->size, + ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + REG_WRITE(map->pos, 0); + REG_WRITE(map->src, + ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + REG_WRITE(map->conf, pipeconf); + REG_READ(map->conf); + + gma_wait_for_vblank(dev); + + REG_WRITE(map->cntr, dspcntr); + + /* Flush the plane changes */ + crtc_funcs->mode_set_base(crtc, x, y, old_fb); + + gma_wait_for_vblank(dev); + + return 0; +} + +/* Returns the clock of the currently programmed mode of the given pipe. */ +static int psb_intel_crtc_clock_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + int pipe = gma_crtc->pipe; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + u32 dpll; + u32 fp; + struct gma_clock_t clock; + bool is_lvds; + struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; + + if (gma_power_begin(dev, false)) { + dpll = REG_READ(map->dpll); + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = REG_READ(map->fp0); + else + fp = REG_READ(map->fp1); + is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); + gma_power_end(dev); + } else { + dpll = p->dpll; + + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = p->fp0; + else + fp = p->fp1; + + is_lvds = (pipe == 1) && (dev_priv->regs.psb.saveLVDS & + LVDS_PORT_EN); + } + + clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; + clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; + clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; + + if (is_lvds) { + clock.p1 = + ffs((dpll & + DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> + DPLL_FPA01_P1_POST_DIV_SHIFT); + clock.p2 = 14; + + if ((dpll & PLL_REF_INPUT_MASK) == + PLLB_REF_INPUT_SPREADSPECTRUMIN) { + /* XXX: might not be 66MHz */ + psb_intel_clock(66000, &clock); + } else + psb_intel_clock(48000, &clock); + } else { + if (dpll & PLL_P1_DIVIDE_BY_TWO) + clock.p1 = 2; + else { + clock.p1 = + ((dpll & + DPLL_FPA01_P1_POST_DIV_MASK_I830) >> + DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; + } + if (dpll & PLL_P2_DIVIDE_BY_4) + clock.p2 = 4; + else + clock.p2 = 2; + + psb_intel_clock(48000, &clock); + } + + /* XXX: It would be nice to validate the clocks, but we can't reuse + * i830PllIsValid() because it relies on the xf86_config connector + * configuration being accurate, which it isn't necessarily. + */ + + return clock.dot; +} + +/** Returns the currently programmed mode of the given pipe. */ +struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + int pipe = gma_crtc->pipe; + struct drm_display_mode *mode; + int htot; + int hsync; + int vtot; + int vsync; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; + const struct psb_offset *map = &dev_priv->regmap[pipe]; + + if (gma_power_begin(dev, false)) { + htot = REG_READ(map->htotal); + hsync = REG_READ(map->hsync); + vtot = REG_READ(map->vtotal); + vsync = REG_READ(map->vsync); + gma_power_end(dev); + } else { + htot = p->htotal; + hsync = p->hsync; + vtot = p->vtotal; + vsync = p->vsync; + } + + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->clock = psb_intel_crtc_clock_get(dev, crtc); + mode->hdisplay = (htot & 0xffff) + 1; + mode->htotal = ((htot & 0xffff0000) >> 16) + 1; + mode->hsync_start = (hsync & 0xffff) + 1; + mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; + mode->vdisplay = (vtot & 0xffff) + 1; + mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; + mode->vsync_start = (vsync & 0xffff) + 1; + mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + return mode; +} + +const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { + .dpms = gma_crtc_dpms, + .mode_set = psb_intel_crtc_mode_set, + .mode_set_base = gma_pipe_set_base, + .prepare = gma_crtc_prepare, + .commit = gma_crtc_commit, + .disable = gma_crtc_disable, +}; + +const struct gma_clock_funcs psb_clock_funcs = { + .clock = psb_intel_clock, + .limit = psb_intel_limit, + .pll_is_valid = gma_pll_is_valid, +}; + +/* + * Set the default value of cursor control and base register + * to zero. This is a workaround for h/w defect on Oaktrail + */ +static void psb_intel_cursor_init(struct drm_device *dev, + struct gma_crtc *gma_crtc) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR }; + u32 base[3] = { CURABASE, CURBBASE, CURCBASE }; + struct psb_gem_object *cursor_pobj; + + if (dev_priv->ops->cursor_needs_phys) { + /* Allocate 4 pages of stolen mem for a hardware cursor. That + * is enough for the 64 x 64 ARGB cursors we support. + */ + cursor_pobj = psb_gem_create(dev, 4 * PAGE_SIZE, "cursor", true, PAGE_SIZE); + if (IS_ERR(cursor_pobj)) { + gma_crtc->cursor_pobj = NULL; + goto out; + } + gma_crtc->cursor_pobj = cursor_pobj; + gma_crtc->cursor_addr = dev_priv->stolen_base + cursor_pobj->offset; + } else { + gma_crtc->cursor_pobj = NULL; + } + +out: + REG_WRITE(control[gma_crtc->pipe], 0); + REG_WRITE(base[gma_crtc->pipe], 0); +} + +void psb_intel_crtc_init(struct drm_device *dev, int pipe, + struct psb_intel_mode_device *mode_dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_crtc *gma_crtc; + int i; + + /* We allocate a extra array of drm_connector pointers + * for fbdev after the crtc */ + gma_crtc = kzalloc(sizeof(struct gma_crtc) + + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), + GFP_KERNEL); + if (gma_crtc == NULL) + return; + + gma_crtc->crtc_state = + kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL); + if (!gma_crtc->crtc_state) { + dev_err(dev->dev, "Crtc state error: No memory\n"); + kfree(gma_crtc); + return; + } + + drm_crtc_init(dev, &gma_crtc->base, &gma_crtc_funcs); + + /* Set the CRTC clock functions from chip specific data */ + gma_crtc->clock_funcs = dev_priv->ops->clock_funcs; + + drm_mode_crtc_set_gamma_size(&gma_crtc->base, 256); + gma_crtc->pipe = pipe; + gma_crtc->plane = pipe; + + for (i = 0; i < 256; i++) + gma_crtc->lut_adj[i] = 0; + + gma_crtc->mode_dev = mode_dev; + gma_crtc->cursor_addr = 0; + + drm_crtc_helper_add(&gma_crtc->base, + dev_priv->ops->crtc_helper); + + /* Setup the array of drm_connector pointer array */ + gma_crtc->mode_set.crtc = &gma_crtc->base; + BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || + dev_priv->plane_to_crtc_mapping[gma_crtc->plane] != NULL); + dev_priv->plane_to_crtc_mapping[gma_crtc->plane] = &gma_crtc->base; + dev_priv->pipe_to_crtc_mapping[gma_crtc->pipe] = &gma_crtc->base; + gma_crtc->mode_set.connectors = (struct drm_connector **)(gma_crtc + 1); + gma_crtc->mode_set.num_connectors = 0; + psb_intel_cursor_init(dev, gma_crtc); + + /* Set to true so that the pipe is forced off on initial config. */ + gma_crtc->active = true; +} + +struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) +{ + struct drm_crtc *crtc; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + + if (gma_crtc->pipe == pipe) + return crtc; + } + return NULL; +} + +int gma_connector_clones(struct drm_device *dev, int type_mask) +{ + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + int index_mask = 0; + int entry = 0; + + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + if (type_mask & (1 << gma_encoder->type)) + index_mask |= (1 << entry); + entry++; + } + drm_connector_list_iter_end(&conn_iter); + + return index_mask; +} diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h new file mode 100644 index 000000000..8a1111fe7 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h @@ -0,0 +1,256 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2009-2011, Intel Corporation. + */ + +#ifndef __INTEL_DRV_H__ +#define __INTEL_DRV_H__ + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_encoder.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_vblank.h> +#include "gma_display.h" + +/* + * Display related stuff + */ + +/* maximum connectors per crtcs in the mode set */ +#define INTELFB_CONN_LIMIT 4 + +/* Intel Pipe Clone Bit */ +#define INTEL_HDMIB_CLONE_BIT 1 +#define INTEL_HDMIC_CLONE_BIT 2 +#define INTEL_HDMID_CLONE_BIT 3 +#define INTEL_HDMIE_CLONE_BIT 4 +#define INTEL_HDMIF_CLONE_BIT 5 +#define INTEL_SDVO_NON_TV_CLONE_BIT 6 +#define INTEL_SDVO_TV_CLONE_BIT 7 +#define INTEL_SDVO_LVDS_CLONE_BIT 8 +#define INTEL_ANALOG_CLONE_BIT 9 +#define INTEL_TV_CLONE_BIT 10 +#define INTEL_DP_B_CLONE_BIT 11 +#define INTEL_DP_C_CLONE_BIT 12 +#define INTEL_DP_D_CLONE_BIT 13 +#define INTEL_LVDS_CLONE_BIT 14 +#define INTEL_DVO_TMDS_CLONE_BIT 15 +#define INTEL_DVO_LVDS_CLONE_BIT 16 +#define INTEL_EDP_CLONE_BIT 17 + +/* these are outputs from the chip - integrated only + * external chips are via DVO or SDVO output */ +#define INTEL_OUTPUT_UNUSED 0 +#define INTEL_OUTPUT_ANALOG 1 +#define INTEL_OUTPUT_DVO 2 +#define INTEL_OUTPUT_SDVO 3 +#define INTEL_OUTPUT_LVDS 4 +#define INTEL_OUTPUT_TVOUT 5 +#define INTEL_OUTPUT_HDMI 6 +#define INTEL_OUTPUT_MIPI 7 +#define INTEL_OUTPUT_MIPI2 8 +#define INTEL_OUTPUT_DISPLAYPORT 9 +#define INTEL_OUTPUT_EDP 10 + +/* + * Hold information useally put on the device driver privates here, + * since it needs to be shared across multiple of devices drivers privates. + */ +struct psb_intel_mode_device { + + /* + * Abstracted memory manager operations + */ + size_t(*bo_offset) (struct drm_device *dev, void *bo); + + /* + * LVDS info + */ + int backlight_duty_cycle; /* restore backlight to this value */ + bool panel_wants_dither; + struct drm_display_mode *panel_fixed_mode; + struct drm_display_mode *panel_fixed_mode2; + struct drm_display_mode *vbt_mode; /* if any */ + + uint32_t saveBLC_PWM_CTL; +}; + +struct gma_i2c_chan { + struct i2c_adapter base; + struct i2c_algo_bit_data algo; + u8 slave_addr; + + /* for getting at dev. private (mmio etc.) */ + struct drm_device *drm_dev; + u32 reg; /* GPIO reg */ +}; + +struct gma_encoder { + struct drm_encoder base; + int type; + bool needs_tv_clock; + void (*hot_plug)(struct gma_encoder *); + int crtc_mask; + int clone_mask; + u32 ddi_select; /* Channel info */ +#define DDI0_SELECT 0x01 +#define DDI1_SELECT 0x02 +#define DP_MASK 0x8000 +#define DDI_MASK 0x03 + void *dev_priv; /* For sdvo_priv, lvds_priv, etc... */ + + /* FIXME: Either make SDVO and LVDS store it's i2c here or give CDV it's + own set of output privates */ + struct gma_i2c_chan *i2c_bus; +}; + +struct gma_connector { + struct drm_connector base; + struct gma_encoder *encoder; + + void (*save)(struct drm_connector *connector); + void (*restore)(struct drm_connector *connector); +}; + +struct psb_intel_crtc_state { + uint32_t saveDSPCNTR; + uint32_t savePIPECONF; + uint32_t savePIPESRC; + uint32_t saveDPLL; + uint32_t saveFP0; + uint32_t saveFP1; + uint32_t saveHTOTAL; + uint32_t saveHBLANK; + uint32_t saveHSYNC; + uint32_t saveVTOTAL; + uint32_t saveVBLANK; + uint32_t saveVSYNC; + uint32_t saveDSPSTRIDE; + uint32_t saveDSPSIZE; + uint32_t saveDSPPOS; + uint32_t saveDSPBASE; + uint32_t savePalette[256]; +}; + +struct gma_crtc { + struct drm_crtc base; + int pipe; + int plane; + uint32_t cursor_addr; + struct psb_gem_object *cursor_pobj; + u8 lut_adj[256]; + struct psb_intel_framebuffer *fbdev_fb; + /* a mode_set for fbdev users on this crtc */ + struct drm_mode_set mode_set; + + /* GEM object that holds our cursor */ + struct drm_gem_object *cursor_obj; + + struct drm_display_mode saved_mode; + struct drm_display_mode saved_adjusted_mode; + + struct psb_intel_mode_device *mode_dev; + + /*crtc mode setting flags*/ + u32 mode_flags; + + bool active; + + /* Saved Crtc HW states */ + struct psb_intel_crtc_state *crtc_state; + + const struct gma_clock_funcs *clock_funcs; + + struct drm_pending_vblank_event *page_flip_event; +}; + +#define to_gma_crtc(x) \ + container_of(x, struct gma_crtc, base) +#define to_gma_connector(x) \ + container_of(x, struct gma_connector, base) +#define to_gma_encoder(x) \ + container_of(x, struct gma_encoder, base) +#define to_psb_intel_framebuffer(x) \ + container_of(x, struct psb_intel_framebuffer, base) +#define to_gma_i2c_chan(x) \ + container_of(x, struct gma_i2c_chan, base) + +struct gma_i2c_chan *gma_i2c_create(struct drm_device *dev, const u32 reg, + const char *name); +void gma_i2c_destroy(struct gma_i2c_chan *chan); +int psb_intel_ddc_get_modes(struct drm_connector *connector, + struct i2c_adapter *adapter); +extern bool psb_intel_ddc_probe(struct i2c_adapter *adapter); + +extern void psb_intel_crtc_init(struct drm_device *dev, int pipe, + struct psb_intel_mode_device *mode_dev); +extern void psb_intel_crt_init(struct drm_device *dev); +extern bool psb_intel_sdvo_init(struct drm_device *dev, int output_device); +extern void psb_intel_dvo_init(struct drm_device *dev); +extern void psb_intel_tv_init(struct drm_device *dev); +extern void psb_intel_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev); +extern void psb_intel_lvds_set_brightness(struct drm_device *dev, int level); +extern void oaktrail_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev); +extern void oaktrail_wait_for_INTR_PKT_SENT(struct drm_device *dev); +struct gma_i2c_chan *oaktrail_lvds_i2c_init(struct drm_device *dev); +extern void mid_dsi_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev, int dsi_num); + +extern struct drm_encoder *gma_best_encoder(struct drm_connector *connector); +extern void gma_connector_attach_encoder(struct gma_connector *connector, + struct gma_encoder *encoder); + +static inline struct gma_encoder *gma_attached_encoder( + struct drm_connector *connector) +{ + return to_gma_connector(connector)->encoder; +} + +extern struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc); +extern struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, + int pipe); +extern struct drm_connector *psb_intel_sdvo_find(struct drm_device *dev, + int sdvoB); +extern int intelfb_probe(struct drm_device *dev); +extern int intelfb_remove(struct drm_device *dev, + struct drm_framebuffer *fb); +extern bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); +extern enum drm_mode_status psb_intel_lvds_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode); +extern int psb_intel_lvds_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value); +extern void psb_intel_lvds_destroy(struct drm_connector *connector); + +/* intel_gmbus.c */ +extern void gma_intel_i2c_reset(struct drm_device *dev); +extern int gma_intel_setup_gmbus(struct drm_device *dev); +extern void gma_intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed); +extern void gma_intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit); +extern void gma_intel_teardown_gmbus(struct drm_device *dev); + +/* DP support */ +extern void cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, int output_reg); +extern void cdv_intel_dp_set_m_n(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + +extern void psb_intel_attach_force_audio_property(struct drm_connector *connector); +extern void psb_intel_attach_broadcast_rgb_property(struct drm_connector *connector); + +extern int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val); +extern int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val); +extern void cdv_sb_reset(struct drm_device *dev); + +extern void cdv_intel_attach_force_audio_property(struct drm_connector *connector); +extern void cdv_intel_attach_broadcast_rgb_property(struct drm_connector *connector); + +#endif /* __INTEL_DRV_H__ */ diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c new file mode 100644 index 000000000..7ee6c8ce1 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c @@ -0,0 +1,800 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright © 2006-2007 Intel Corporation + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include <linux/pm_runtime.h> + +#include <drm/drm_simple_kms_helper.h> + +#include "intel_bios.h" +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" + +/* + * LVDS I2C backlight control macros + */ +#define BRIGHTNESS_MAX_LEVEL 100 +#define BRIGHTNESS_MASK 0xFF +#define BLC_I2C_TYPE 0x01 +#define BLC_PWM_TYPT 0x02 + +#define BLC_POLARITY_NORMAL 0 +#define BLC_POLARITY_INVERSE 1 + +#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE) +#define PSB_BLC_MIN_PWM_REG_FREQ (0x2) +#define PSB_BLC_PWM_PRECISION_FACTOR (10) +#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) +#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) + +struct psb_intel_lvds_priv { + /* + * Saved LVDO output states + */ + uint32_t savePP_ON; + uint32_t savePP_OFF; + uint32_t saveLVDS; + uint32_t savePP_CONTROL; + uint32_t savePP_CYCLE; + uint32_t savePFIT_CONTROL; + uint32_t savePFIT_PGM_RATIOS; + uint32_t saveBLC_PWM_CTL; + + struct gma_i2c_chan *i2c_bus; +}; + + +/* + * Returns the maximum level of the backlight duty cycle field. + */ +static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 ret; + + if (gma_power_begin(dev, false)) { + ret = REG_READ(BLC_PWM_CTL); + gma_power_end(dev); + } else /* Powered off, use the saved value */ + ret = dev_priv->regs.saveBLC_PWM_CTL; + + /* Top 15bits hold the frequency mask */ + ret = (ret & BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT; + + ret *= 2; /* Return a 16bit range as needed for setting */ + if (ret == 0) + dev_err(dev->dev, "BL bug: Reg %08x save %08X\n", + REG_READ(BLC_PWM_CTL), dev_priv->regs.saveBLC_PWM_CTL); + return ret; +} + +/* + * Set LVDS backlight level by I2C command + * + * FIXME: at some point we need to both track this for PM and also + * disable runtime pm on MRST if the brightness is nil (ie blanked) + */ +static int psb_lvds_i2c_set_brightness(struct drm_device *dev, + unsigned int level) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + struct gma_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus; + u8 out_buf[2]; + unsigned int blc_i2c_brightness; + + struct i2c_msg msgs[] = { + { + .addr = lvds_i2c_bus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + } + }; + + blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level * + BRIGHTNESS_MASK / + BRIGHTNESS_MAX_LEVEL); + + if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) + blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness; + + out_buf[0] = dev_priv->lvds_bl->brightnesscmd; + out_buf[1] = (u8)blc_i2c_brightness; + + if (i2c_transfer(&lvds_i2c_bus->base, msgs, 1) == 1) { + dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n", + dev_priv->lvds_bl->brightnesscmd, + blc_i2c_brightness); + return 0; + } + + dev_err(dev->dev, "I2C transfer error\n"); + return -1; +} + + +static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + u32 max_pwm_blc; + u32 blc_pwm_duty_cycle; + + max_pwm_blc = psb_intel_lvds_get_max_backlight(dev); + + /*BLC_PWM_CTL Should be initiated while backlight device init*/ + BUG_ON(max_pwm_blc == 0); + + blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL; + + if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) + blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle; + + blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; + REG_WRITE(BLC_PWM_CTL, + (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | + (blc_pwm_duty_cycle)); + + dev_info(dev->dev, "Backlight lvds set brightness %08x\n", + (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | + (blc_pwm_duty_cycle)); + + return 0; +} + +/* + * Set LVDS backlight level either by I2C or PWM + */ +void psb_intel_lvds_set_brightness(struct drm_device *dev, int level) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + dev_dbg(dev->dev, "backlight level is %d\n", level); + + if (!dev_priv->lvds_bl) { + dev_err(dev->dev, "NO LVDS backlight info\n"); + return; + } + + if (dev_priv->lvds_bl->type == BLC_I2C_TYPE) + psb_lvds_i2c_set_brightness(dev, level); + else + psb_lvds_pwm_set_brightness(dev, level); +} + +/* + * Sets the backlight level. + * + * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight(). + */ +static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 blc_pwm_ctl; + + if (gma_power_begin(dev, false)) { + blc_pwm_ctl = REG_READ(BLC_PWM_CTL); + blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; + REG_WRITE(BLC_PWM_CTL, + (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); + dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); + gma_power_end(dev); + } else { + blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL & + ~BACKLIGHT_DUTY_CYCLE_MASK; + dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); + } +} + +/* + * Sets the power state for the panel. + */ +static void psb_intel_lvds_set_power(struct drm_device *dev, bool on) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + u32 pp_status; + + if (!gma_power_begin(dev, true)) { + dev_err(dev->dev, "set power, chip off!\n"); + return; + } + + if (on) { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0); + + psb_intel_lvds_set_backlight(dev, + mode_dev->backlight_duty_cycle); + } else { + psb_intel_lvds_set_backlight(dev, 0); + + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while (pp_status & PP_ON); + } + + gma_power_end(dev); +} + +static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + + if (mode == DRM_MODE_DPMS_ON) + psb_intel_lvds_set_power(dev, true); + else + psb_intel_lvds_set_power(dev, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void psb_intel_lvds_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct psb_intel_lvds_priv *lvds_priv = + (struct psb_intel_lvds_priv *)gma_encoder->dev_priv; + + lvds_priv->savePP_ON = REG_READ(LVDSPP_ON); + lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF); + lvds_priv->saveLVDS = REG_READ(LVDS); + lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL); + lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE); + /*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/ + lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL); + lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); + + /*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/ + dev_priv->backlight_duty_cycle = (dev_priv->regs.saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + /* + * If the light is off at server startup, + * just make it full brightness + */ + if (dev_priv->backlight_duty_cycle == 0) + dev_priv->backlight_duty_cycle = + psb_intel_lvds_get_max_backlight(dev); + + dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", + lvds_priv->savePP_ON, + lvds_priv->savePP_OFF, + lvds_priv->saveLVDS, + lvds_priv->savePP_CONTROL, + lvds_priv->savePP_CYCLE, + lvds_priv->saveBLC_PWM_CTL); +} + +static void psb_intel_lvds_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + u32 pp_status; + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct psb_intel_lvds_priv *lvds_priv = + (struct psb_intel_lvds_priv *)gma_encoder->dev_priv; + + dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", + lvds_priv->savePP_ON, + lvds_priv->savePP_OFF, + lvds_priv->saveLVDS, + lvds_priv->savePP_CONTROL, + lvds_priv->savePP_CYCLE, + lvds_priv->saveBLC_PWM_CTL); + + REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL); + REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL); + REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS); + REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON); + REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF); + /*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/ + REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE); + REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL); + REG_WRITE(LVDS, lvds_priv->saveLVDS); + + if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0); + } else { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while (pp_status & PP_ON); + } +} + +enum drm_mode_status psb_intel_lvds_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct drm_display_mode *fixed_mode = + dev_priv->mode_dev.panel_fixed_mode; + + if (gma_encoder->type == INTEL_OUTPUT_MIPI2) + fixed_mode = dev_priv->mode_dev.panel_fixed_mode2; + + /* just in case */ + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + /* just in case */ + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + return MODE_NO_INTERLACE; + + if (fixed_mode) { + if (mode->hdisplay > fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > fixed_mode->vdisplay) + return MODE_PANEL; + } + return MODE_OK; +} + +bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc); + struct drm_encoder *tmp_encoder; + struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode; + struct gma_encoder *gma_encoder = to_gma_encoder(encoder); + + if (gma_encoder->type == INTEL_OUTPUT_MIPI2) + panel_fixed_mode = mode_dev->panel_fixed_mode2; + + /* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */ + if (!IS_MRST(dev) && gma_crtc->pipe == 0) { + pr_err("Can't support LVDS on pipe A\n"); + return false; + } + if (IS_MRST(dev) && gma_crtc->pipe != 0) { + pr_err("Must use PIPE A\n"); + return false; + } + /* Should never happen!! */ + list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, + head) { + if (tmp_encoder != encoder + && tmp_encoder->crtc == encoder->crtc) { + pr_err("Can't enable LVDS and another encoder on the same pipe\n"); + return false; + } + } + + /* + * If we have timings from the BIOS for the panel, put them in + * to the adjusted mode. The CRTC will be set up for this mode, + * with the panel scaling set up to source from the H/VDisplay + * of the original mode. + */ + if (panel_fixed_mode != NULL) { + adjusted_mode->hdisplay = panel_fixed_mode->hdisplay; + adjusted_mode->hsync_start = panel_fixed_mode->hsync_start; + adjusted_mode->hsync_end = panel_fixed_mode->hsync_end; + adjusted_mode->htotal = panel_fixed_mode->htotal; + adjusted_mode->vdisplay = panel_fixed_mode->vdisplay; + adjusted_mode->vsync_start = panel_fixed_mode->vsync_start; + adjusted_mode->vsync_end = panel_fixed_mode->vsync_end; + adjusted_mode->vtotal = panel_fixed_mode->vtotal; + adjusted_mode->clock = panel_fixed_mode->clock; + drm_mode_set_crtcinfo(adjusted_mode, + CRTC_INTERLACE_HALVE_V); + } + + /* + * XXX: It would be nice to support lower refresh rates on the + * panels to reduce power consumption, and perhaps match the + * user's requested refresh rate. + */ + + return true; +} + +static void psb_intel_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (!gma_power_begin(dev, true)) + return; + + mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + psb_intel_lvds_set_power(dev, false); + + gma_power_end(dev); +} + +static void psb_intel_lvds_commit(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (mode_dev->backlight_duty_cycle == 0) + mode_dev->backlight_duty_cycle = + psb_intel_lvds_get_max_backlight(dev); + + psb_intel_lvds_set_power(dev, true); +} + +static void psb_intel_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 pfit_control; + + /* + * The LVDS pin pair will already have been turned on in the + * psb_intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + + /* + * Enable automatic panel scaling so that non-native modes fill the + * screen. Should be enabled before the pipe is enabled, according to + * register description and PRM. + */ + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) + pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + else + pfit_control = 0; + + if (dev_priv->lvds_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + + REG_WRITE(PFIT_CONTROL, pfit_control); +} + +/* + * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. + */ +static int psb_intel_lvds_get_modes(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + int ret = 0; + + if (!IS_MRST(dev)) + ret = psb_intel_ddc_get_modes(connector, connector->ddc); + + if (ret) + return ret; + + if (mode_dev->panel_fixed_mode != NULL) { + struct drm_display_mode *mode = + drm_mode_duplicate(dev, mode_dev->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + return 1; + } + + return 0; +} + +void psb_intel_lvds_destroy(struct drm_connector *connector) +{ + struct gma_connector *gma_connector = to_gma_connector(connector); + struct gma_i2c_chan *ddc_bus = to_gma_i2c_chan(connector->ddc); + + gma_i2c_destroy(ddc_bus); + drm_connector_cleanup(connector); + kfree(gma_connector); +} + +int psb_intel_lvds_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_encoder *encoder = connector->encoder; + + if (!encoder) + return -1; + + if (!strcmp(property->name, "scaling mode")) { + struct gma_crtc *crtc = to_gma_crtc(encoder->crtc); + uint64_t curval; + + if (!crtc) + goto set_prop_error; + + switch (value) { + case DRM_MODE_SCALE_FULLSCREEN: + break; + case DRM_MODE_SCALE_NO_SCALE: + break; + case DRM_MODE_SCALE_ASPECT: + break; + default: + goto set_prop_error; + } + + if (drm_object_property_get_value(&connector->base, + property, + &curval)) + goto set_prop_error; + + if (curval == value) + goto set_prop_done; + + if (drm_object_property_set_value(&connector->base, + property, + value)) + goto set_prop_error; + + if (crtc->saved_mode.hdisplay != 0 && + crtc->saved_mode.vdisplay != 0) { + if (!drm_crtc_helper_set_mode(encoder->crtc, + &crtc->saved_mode, + encoder->crtc->x, + encoder->crtc->y, + encoder->crtc->primary->fb)) + goto set_prop_error; + } + } else if (!strcmp(property->name, "backlight")) { + if (drm_object_property_set_value(&connector->base, + property, + value)) + goto set_prop_error; + else + gma_backlight_set(encoder->dev, value); + } else if (!strcmp(property->name, "DPMS")) { + const struct drm_encoder_helper_funcs *hfuncs + = encoder->helper_private; + hfuncs->dpms(encoder, value); + } + +set_prop_done: + return 0; +set_prop_error: + return -1; +} + +static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = { + .dpms = psb_intel_lvds_encoder_dpms, + .mode_fixup = psb_intel_lvds_mode_fixup, + .prepare = psb_intel_lvds_prepare, + .mode_set = psb_intel_lvds_mode_set, + .commit = psb_intel_lvds_commit, +}; + +const struct drm_connector_helper_funcs + psb_intel_lvds_connector_helper_funcs = { + .get_modes = psb_intel_lvds_get_modes, + .mode_valid = psb_intel_lvds_mode_valid, + .best_encoder = gma_best_encoder, +}; + +const struct drm_connector_funcs psb_intel_lvds_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = psb_intel_lvds_set_property, + .destroy = psb_intel_lvds_destroy, +}; + +/** + * psb_intel_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * @mode_dev: mode device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void psb_intel_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct gma_encoder *gma_encoder; + struct gma_connector *gma_connector; + struct psb_intel_lvds_priv *lvds_priv; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + struct drm_crtc *crtc; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_i2c_chan *ddc_bus; + u32 lvds; + int pipe; + int ret; + + gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); + if (!gma_encoder) { + dev_err(dev->dev, "gma_encoder allocation error\n"); + return; + } + encoder = &gma_encoder->base; + + gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); + if (!gma_connector) { + dev_err(dev->dev, "gma_connector allocation error\n"); + goto err_free_encoder; + } + + lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL); + if (!lvds_priv) { + dev_err(dev->dev, "LVDS private allocation error\n"); + goto err_free_connector; + } + + gma_encoder->dev_priv = lvds_priv; + + connector = &gma_connector->base; + gma_connector->save = psb_intel_lvds_save; + gma_connector->restore = psb_intel_lvds_restore; + + /* Set up the DDC bus. */ + ddc_bus = gma_i2c_create(dev, GPIOC, "LVDSDDC_C"); + if (!ddc_bus) { + dev_printk(KERN_ERR, dev->dev, + "DDC bus registration " "failed.\n"); + goto err_free_lvds_priv; + } + + ret = drm_connector_init_with_ddc(dev, connector, + &psb_intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS, + &ddc_bus->base); + if (ret) + goto err_ddc_destroy; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); + if (ret) + goto err_connector_cleanup; + + gma_connector_attach_encoder(gma_connector, gma_encoder); + gma_encoder->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs); + drm_connector_helper_add(connector, + &psb_intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + /*Attach connector properties*/ + drm_object_attach_property(&connector->base, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + drm_object_attach_property(&connector->base, + dev_priv->backlight_property, + BRIGHTNESS_MAX_LEVEL); + + /* + * Set up I2C bus + * FIXME: distroy i2c_bus when exit + */ + lvds_priv->i2c_bus = gma_i2c_create(dev, GPIOB, "LVDSBLC_B"); + if (!lvds_priv->i2c_bus) { + dev_printk(KERN_ERR, + dev->dev, "I2C bus registration failed.\n"); + goto err_encoder_cleanup; + } + lvds_priv->i2c_bus->slave_addr = 0x2C; + dev_priv->lvds_i2c_bus = lvds_priv->i2c_bus; + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + mutex_lock(&dev->mode_config.mutex); + psb_intel_ddc_get_modes(connector, &ddc_bus->base); + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + DRM_DEBUG_KMS("Using mode from DDC\n"); + goto out; /* FIXME: check for quirks */ + } + } + + /* Failed to get EDID, what about VBT? do we need this? */ + if (dev_priv->lfp_lvds_vbt_mode) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); + + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + DRM_DEBUG_KMS("Using mode from VBT\n"); + goto out; + } + } + + /* + * If we didn't get EDID, try checking if the panel is already turned + * on. If so, assume that whatever is currently programmed is the + * correct mode. + */ + lvds = REG_READ(LVDS); + pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; + crtc = psb_intel_get_crtc_from_pipe(dev, pipe); + + if (crtc && (lvds & LVDS_PORT_EN)) { + mode_dev->panel_fixed_mode = + psb_intel_crtc_mode_get(dev, crtc); + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + DRM_DEBUG_KMS("Using pre-programmed mode\n"); + goto out; /* FIXME: check for quirks */ + } + } + + /* If we still don't have a mode after all that, give up. */ + if (!mode_dev->panel_fixed_mode) { + dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); + goto err_unlock; + } + + /* + * Blacklist machines with BIOSes that list an LVDS panel without + * actually having one. + */ +out: + mutex_unlock(&dev->mode_config.mutex); + return; + +err_unlock: + mutex_unlock(&dev->mode_config.mutex); + gma_i2c_destroy(lvds_priv->i2c_bus); +err_encoder_cleanup: + drm_encoder_cleanup(encoder); +err_connector_cleanup: + drm_connector_cleanup(connector); +err_ddc_destroy: + gma_i2c_destroy(ddc_bus); +err_free_lvds_priv: + kfree(lvds_priv); +err_free_connector: + kfree(gma_connector); +err_free_encoder: + kfree(gma_encoder); +} + diff --git a/drivers/gpu/drm/gma500/psb_intel_modes.c b/drivers/gpu/drm/gma500/psb_intel_modes.c new file mode 100644 index 000000000..8be0ec340 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_intel_modes.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2007 Intel Corporation + * + * Authers: Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> + +#include <drm/drm_edid.h> + +#include "psb_intel_drv.h" + +/** + * psb_intel_ddc_probe + * @adapter: Associated I2C adaptor + */ +bool psb_intel_ddc_probe(struct i2c_adapter *adapter) +{ + u8 out_buf[] = { 0x0, 0x0 }; + u8 buf[2]; + int ret; + struct i2c_msg msgs[] = { + { + .addr = 0x50, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + ret = i2c_transfer(adapter, msgs, 2); + if (ret == 2) + return true; + + return false; +} + +/** + * psb_intel_ddc_get_modes - get modelist from monitor + * @connector: DRM connector device to use + * @adapter: Associated I2C adaptor + * + * Fetch the EDID information from @connector using the DDC bus. + */ +int psb_intel_ddc_get_modes(struct drm_connector *connector, + struct i2c_adapter *adapter) +{ + struct edid *edid; + int ret = 0; + + edid = drm_get_edid(connector, adapter); + if (edid) { + drm_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } + return ret; +} diff --git a/drivers/gpu/drm/gma500/psb_intel_reg.h b/drivers/gpu/drm/gma500/psb_intel_reg.h new file mode 100644 index 000000000..ced7b433b --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_intel_reg.h @@ -0,0 +1,1491 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2009, Intel Corporation. + */ +#ifndef __PSB_INTEL_REG_H__ +#define __PSB_INTEL_REG_H__ + +/* + * GPIO regs + */ +#define GPIOA 0x5010 +#define GPIOB 0x5014 +#define GPIOC 0x5018 +#define GPIOD 0x501c +#define GPIOE 0x5020 +#define GPIOF 0x5024 +#define GPIOG 0x5028 +#define GPIOH 0x502c +# define GPIO_CLOCK_DIR_MASK (1 << 0) +# define GPIO_CLOCK_DIR_IN (0 << 1) +# define GPIO_CLOCK_DIR_OUT (1 << 1) +# define GPIO_CLOCK_VAL_MASK (1 << 2) +# define GPIO_CLOCK_VAL_OUT (1 << 3) +# define GPIO_CLOCK_VAL_IN (1 << 4) +# define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) +# define GPIO_DATA_DIR_MASK (1 << 8) +# define GPIO_DATA_DIR_IN (0 << 9) +# define GPIO_DATA_DIR_OUT (1 << 9) +# define GPIO_DATA_VAL_MASK (1 << 10) +# define GPIO_DATA_VAL_OUT (1 << 11) +# define GPIO_DATA_VAL_IN (1 << 12) +# define GPIO_DATA_PULLUP_DISABLE (1 << 13) + +#define GMBUS0 0x5100 /* clock/port select */ +#define GMBUS_RATE_100KHZ (0<<8) +#define GMBUS_RATE_50KHZ (1<<8) +#define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */ +#define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */ +#define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */ +#define GMBUS_PORT_DISABLED 0 +#define GMBUS_PORT_SSC 1 +#define GMBUS_PORT_VGADDC 2 +#define GMBUS_PORT_PANEL 3 +#define GMBUS_PORT_DPC 4 /* HDMIC */ +#define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */ + /* 6 reserved */ +#define GMBUS_PORT_DPD 7 /* HDMID */ +#define GMBUS_NUM_PORTS 8 +#define GMBUS1 0x5104 /* command/status */ +#define GMBUS_SW_CLR_INT (1<<31) +#define GMBUS_SW_RDY (1<<30) +#define GMBUS_ENT (1<<29) /* enable timeout */ +#define GMBUS_CYCLE_NONE (0<<25) +#define GMBUS_CYCLE_WAIT (1<<25) +#define GMBUS_CYCLE_INDEX (2<<25) +#define GMBUS_CYCLE_STOP (4<<25) +#define GMBUS_BYTE_COUNT_SHIFT 16 +#define GMBUS_SLAVE_INDEX_SHIFT 8 +#define GMBUS_SLAVE_ADDR_SHIFT 1 +#define GMBUS_SLAVE_READ (1<<0) +#define GMBUS_SLAVE_WRITE (0<<0) +#define GMBUS2 0x5108 /* status */ +#define GMBUS_INUSE (1<<15) +#define GMBUS_HW_WAIT_PHASE (1<<14) +#define GMBUS_STALL_TIMEOUT (1<<13) +#define GMBUS_INT (1<<12) +#define GMBUS_HW_RDY (1<<11) +#define GMBUS_SATOER (1<<10) +#define GMBUS_ACTIVE (1<<9) +#define GMBUS3 0x510c /* data buffer bytes 3-0 */ +#define GMBUS4 0x5110 /* interrupt mask (Pineview+) */ +#define GMBUS_SLAVE_TIMEOUT_EN (1<<4) +#define GMBUS_NAK_EN (1<<3) +#define GMBUS_IDLE_EN (1<<2) +#define GMBUS_HW_WAIT_EN (1<<1) +#define GMBUS_HW_RDY_EN (1<<0) +#define GMBUS5 0x5120 /* byte index */ +#define GMBUS_2BYTE_INDEX_EN (1<<31) + +#define BLC_PWM_CTL 0x61254 +#define BLC_PWM_CTL2 0x61250 +#define PWM_ENABLE (1 << 31) +#define PWM_LEGACY_MODE (1 << 30) +#define PWM_PIPE_B (1 << 29) +#define BLC_PWM_CTL_C 0x62254 +#define BLC_PWM_CTL2_C 0x62250 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +/* + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/* + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +#define I915_GCFGC 0xf0 +#define I915_LOW_FREQUENCY_ENABLE (1 << 7) +#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define I915_DISPLAY_CLOCK_MASK (7 << 4) + +#define I855_HPLLCC 0xc0 +#define I855_CLOCK_CONTROL_MASK (3 << 0) +#define I855_CLOCK_133_200 (0 << 0) +#define I855_CLOCK_100_200 (1 << 0) +#define I855_CLOCK_100_133 (2 << 0) +#define I855_CLOCK_166_250 (3 << 0) + +/* I830 CRTC registers */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +#define VSYNCSHIFT_A 0x60028 + +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +#define VSYNCSHIFT_B 0x61028 + +#define HTOTAL_C 0x62000 +#define HBLANK_C 0x62004 +#define HSYNC_C 0x62008 +#define VTOTAL_C 0x6200c +#define VBLANK_C 0x62010 +#define VSYNC_C 0x62014 +#define PIPECSRC 0x6201c +#define BCLRPAT_C 0x62020 +#define VSYNCSHIFT_C 0x62028 + +#define PP_STATUS 0x61200 +# define PP_ON (1 << 31) +/* + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +#define PP_READY (1 << 30) +#define PP_SEQUENCE_NONE (0 << 28) +#define PP_SEQUENCE_ON (1 << 28) +#define PP_SEQUENCE_OFF (2 << 28) +#define PP_SEQUENCE_MASK 0x30000000 +#define PP_CYCLE_DELAY_ACTIVE (1 << 27) +#define PP_SEQUENCE_STATE_ON_IDLE (1 << 3) +#define PP_SEQUENCE_STATE_MASK 0x0000000f + +#define PP_CONTROL 0x61204 +#define POWER_TARGET_ON (1 << 0) +#define PANEL_UNLOCK_REGS (0xabcd << 16) +#define PANEL_UNLOCK_MASK (0xffff << 16) +#define EDP_FORCE_VDD (1 << 3) +#define EDP_BLC_ENABLE (1 << 2) +#define PANEL_POWER_RESET (1 << 1) +#define PANEL_POWER_OFF (0 << 0) +#define PANEL_POWER_ON (1 << 0) + +/* Poulsbo/Oaktrail */ +#define LVDSPP_ON 0x61208 +#define LVDSPP_OFF 0x6120c +#define PP_CYCLE 0x61210 + +/* Cedartrail */ +#define PP_ON_DELAYS 0x61208 /* Cedartrail */ +#define PANEL_PORT_SELECT_MASK (3 << 30) +#define PANEL_PORT_SELECT_LVDS (0 << 30) +#define PANEL_PORT_SELECT_EDP (1 << 30) +#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000) +#define PANEL_POWER_UP_DELAY_SHIFT 16 +#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff) +#define PANEL_LIGHT_ON_DELAY_SHIFT 0 + +#define PP_OFF_DELAYS 0x6120c /* Cedartrail */ +#define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000) +#define PANEL_POWER_DOWN_DELAY_SHIFT 16 +#define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff) +#define PANEL_LIGHT_OFF_DELAY_SHIFT 0 + +#define PP_DIVISOR 0x61210 /* Cedartrail */ +#define PP_REFERENCE_DIVIDER_MASK (0xffffff00) +#define PP_REFERENCE_DIVIDER_SHIFT 8 +#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f) +#define PANEL_POWER_CYCLE_DELAY_SHIFT 0 + +#define PFIT_CONTROL 0x61230 +#define PFIT_ENABLE (1 << 31) +#define PFIT_PIPE_MASK (3 << 29) +#define PFIT_PIPE_SHIFT 29 +#define PFIT_SCALING_MODE_PILLARBOX (1 << 27) +#define PFIT_SCALING_MODE_LETTERBOX (3 << 26) +#define VERT_INTERP_DISABLE (0 << 10) +#define VERT_INTERP_BILINEAR (1 << 10) +#define VERT_INTERP_MASK (3 << 10) +#define VERT_AUTO_SCALE (1 << 9) +#define HORIZ_INTERP_DISABLE (0 << 6) +#define HORIZ_INTERP_BILINEAR (1 << 6) +#define HORIZ_INTERP_MASK (3 << 6) +#define HORIZ_AUTO_SCALE (1 << 5) +#define PANEL_8TO6_DITHER_ENABLE (1 << 3) + +#define PFIT_PGM_RATIOS 0x61234 +#define PFIT_VERT_SCALE_MASK 0xfff00000 +#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 + +#define PFIT_AUTO_RATIOS 0x61238 + +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +#define DPLL_VCO_ENABLE (1 << 31) +#define DPLL_DVO_HIGH_SPEED (1 << 30) +#define DPLL_SYNCLOCK_ENABLE (1 << 29) +#define DPLL_VGA_MODE_DIS (1 << 28) +#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +#define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +#define DPLL_MODE_MASK (3 << 26) +#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +#define DPLL_FPA0h1_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +#define DPLL_LOCK (1 << 15) /* CDV */ + +/* + * The i830 generation, in DAC/serial mode, defines p1 as two plus this + * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/* + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +#define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +#define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required + * in DVO non-gang */ +# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +#define PLL_REF_INPUT_DREFCLK (0 << 13) +#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO + * TVCLKIN */ +#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +#define PLL_REF_INPUT_MASK (3 << 13) +#define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +#define DISPLAY_RATE_SELECT_FPA1 (1 << 8) + +/* + * SDVO multiplier for 945G/GM. Not used on 965. + * + * DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_MULTIPLIER_MASK 0x000000ff +#define SDVO_MULTIPLIER_SHIFT_HIRES 4 +#define SDVO_MULTIPLIER_SHIFT_VGA 0 + +/* + * PLL_MD + */ +/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_A_MD 0x0601c +/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_B_MD 0x06020 +/* + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +#define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/* + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/* + * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 + +#define DPLL_TEST 0x606c +#define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +#define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +#define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +#define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +#define DPLLB_TEST_N_BYPASS (1 << 19) +#define DPLLB_TEST_M_BYPASS (1 << 18) +#define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +#define DPLLA_TEST_N_BYPASS (1 << 3) +#define DPLLA_TEST_M_BYPASS (1 << 2) +#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) + +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1 << 31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1 << 30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1 << 30) +#define ADPA_USE_VGA_HVPOLARITY (1 << 15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1 << 11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1 << 10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1 << 4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1 << 3) +#define ADPA_HSYNC_ACTIVE_LOW 0 + +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +#define FP_N_DIV_MASK 0x003f0000 +#define FP_N_DIV_SHIFT 16 +#define FP_M1_DIV_MASK 0x00003f00 +#define FP_M1_DIV_SHIFT 8 +#define FP_M2_DIV_MASK 0x0000003f +#define FP_M2_DIV_SHIFT 0 + +#define PORT_HOTPLUG_EN 0x61110 +#define HDMIB_HOTPLUG_INT_EN (1 << 29) +#define HDMIC_HOTPLUG_INT_EN (1 << 28) +#define HDMID_HOTPLUG_INT_EN (1 << 27) +#define SDVOB_HOTPLUG_INT_EN (1 << 26) +#define SDVOC_HOTPLUG_INT_EN (1 << 25) +#define TV_HOTPLUG_INT_EN (1 << 18) +#define CRT_HOTPLUG_INT_EN (1 << 9) +#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) +/* CDV.. */ +#define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) +#define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) +#define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) +#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) +#define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) +#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) +#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) +#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) +#define CRT_HOTPLUG_DETECT_MASK 0x000000F8 + +#define PORT_HOTPLUG_STAT 0x61114 +#define CRT_HOTPLUG_INT_STATUS (1 << 11) +#define TV_HOTPLUG_INT_STATUS (1 << 10) +#define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +#define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +#define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +#define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +#define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +#define SDVO_COLOR_RANGE_16_235 (1 << 8) +#define SDVO_AUDIO_ENABLE (1 << 6) + +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) +#define SDVOC_PRESERVE_MASK (1 << 17) + +/* + * This register controls the LVDS output enable, pipe selection, and data + * format selection. + * + * All of the clock/data pairs are force powered down by power sequencing. + */ +#define LVDS 0x61180 +/* + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +#define LVDS_PORT_EN (1 << 31) +/* Selects pipe B for LVDS data. Must be set on pre-965. */ +#define LVDS_PIPEB_SELECT (1 << 30) + +/* Turns on border drawing to allow centered display. */ +#define LVDS_BORDER_EN (1 << 15) + +/* + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +#define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/* + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +#define LVDS_A3_POWER_MASK (3 << 6) +#define LVDS_A3_POWER_DOWN (0 << 6) +#define LVDS_A3_POWER_UP (3 << 6) +/* + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +#define LVDS_CLKB_POWER_MASK (3 << 4) +#define LVDS_CLKB_POWER_DOWN (0 << 4) +#define LVDS_CLKB_POWER_UP (3 << 4) +/* + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +#define LVDS_B0B3_POWER_MASK (3 << 2) +#define LVDS_B0B3_POWER_DOWN (0 << 2) +#define LVDS_B0B3_POWER_UP (3 << 2) + +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1 << 31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1 << 30) +#define PIPECONF_ACTIVE (1 << 30) +#define PIPECONF_DSIPLL_LOCK (1 << 29) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_DSR (1 << 26) +#define PIPEACONF_PIPE_LOCKED (1 << 25) +#define PIPEACONF_PALETTE 0 +#define PIPECONF_FORCE_BORDER (1 << 25) +#define PIPEACONF_GAMMA (1 << 24) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) +#define PIPECONF_PLANE_OFF (1 << 19) +#define PIPECONF_CURSOR_OFF (1 << 18) + +#define PIPEBCONF 0x71008 +#define PIPEBCONF_ENABLE (1 << 31) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_DOUBLE_WIDE (1 << 30) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_GAMMA (1 << 24) +#define PIPEBCONF_PALETTE 0 + +#define PIPECCONF 0x72008 + +#define PIPEBGCMAXRED 0x71010 +#define PIPEBGCMAXGREEN 0x71014 +#define PIPEBGCMAXBLUE 0x71018 + +#define PIPEASTAT 0x70024 +#define PIPEBSTAT 0x71024 +#define PIPECSTAT 0x72024 +#define PIPE_VBLANK_INTERRUPT_STATUS (1UL << 1) +#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL << 2) +#define PIPE_VBLANK_CLEAR (1 << 1) +#define PIPE_VBLANK_STATUS (1 << 1) +#define PIPE_TE_STATUS (1UL << 6) +#define PIPE_DPST_EVENT_STATUS (1UL << 7) +#define PIPE_VSYNC_CLEAR (1UL << 9) +#define PIPE_VSYNC_STATUS (1UL << 9) +#define PIPE_HDMI_AUDIO_UNDERRUN_STATUS (1UL << 10) +#define PIPE_HDMI_AUDIO_BUFFER_DONE_STATUS (1UL << 11) +#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL << 17) +#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL << 18) +#define PIPE_TE_ENABLE (1UL << 22) +#define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL << 22) +#define PIPE_DPST_EVENT_ENABLE (1UL << 23) +#define PIPE_VSYNC_ENABL (1UL << 25) +#define PIPE_HDMI_AUDIO_UNDERRUN (1UL << 26) +#define PIPE_HDMI_AUDIO_BUFFER_DONE (1UL << 27) +#define PIPE_FIFO_UNDERRUN (1UL << 31) +#define PIPE_HDMI_AUDIO_INT_MASK (PIPE_HDMI_AUDIO_UNDERRUN | \ + PIPE_HDMI_AUDIO_BUFFER_DONE) +#define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16)) +#define PIPE_VBLANK_MASK ((1 << 25)|(1 << 24)|(1 << 18)|(1 << 17)) +#define HISTOGRAM_INT_CONTROL 0x61268 +#define HISTOGRAM_BIN_DATA 0X61264 +#define HISTOGRAM_LOGIC_CONTROL 0x61260 +#define PWM_CONTROL_LOGIC 0x61250 +#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL << 10) +#define HISTOGRAM_INTERRUPT_ENABLE (1UL << 31) +#define HISTOGRAM_LOGIC_ENABLE (1UL << 31) +#define PWM_LOGIC_ENABLE (1UL << 31) +#define PWM_PHASEIN_ENABLE (1UL << 25) +#define PWM_PHASEIN_INT_ENABLE (1UL << 24) +#define PWM_PHASEIN_VB_COUNT 0x00001f00 +#define PWM_PHASEIN_INC 0x0000001f +#define HISTOGRAM_INT_CTRL_CLEAR (1UL << 30) +#define DPST_YUV_LUMA_MODE 0 + +#define PIPEAFRAMEHIGH 0x70040 +#define PIPEAFRAMEPIXEL 0x70044 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 +#define PIPECFRAMEHIGH 0x72040 +#define PIPECFRAMEPIXEL 0x72044 +#define PIPE_FRAME_HIGH_MASK 0x0000ffff +#define PIPE_FRAME_HIGH_SHIFT 0 +#define PIPE_FRAME_LOW_MASK 0xff000000 +#define PIPE_FRAME_LOW_SHIFT 24 +#define PIPE_PIXEL_MASK 0x00ffffff +#define PIPE_PIXEL_SHIFT 0 + +#define FW_BLC_SELF 0x20e0 +#define FW_BLC_SELF_EN (1<<15) + +#define DSPARB 0x70030 +#define DSPFW1 0x70034 +#define DSP_FIFO_SR_WM_MASK 0xFF800000 +#define DSP_FIFO_SR_WM_SHIFT 23 +#define CURSOR_B_FIFO_WM_MASK 0x003F0000 +#define CURSOR_B_FIFO_WM_SHIFT 16 +#define DSPFW2 0x70038 +#define CURSOR_A_FIFO_WM_MASK 0x3F00 +#define CURSOR_A_FIFO_WM_SHIFT 8 +#define DSP_PLANE_C_FIFO_WM_MASK 0x7F +#define DSP_PLANE_C_FIFO_WM_SHIFT 0 +#define DSPFW3 0x7003c +#define DSPFW4 0x70050 +#define DSPFW5 0x70054 +#define DSP_PLANE_B_FIFO_WM1_SHIFT 24 +#define DSP_PLANE_A_FIFO_WM1_SHIFT 16 +#define CURSOR_B_FIFO_WM1_SHIFT 8 +#define CURSOR_FIFO_SR_WM1_SHIFT 0 +#define DSPFW6 0x70058 +#define DSPCHICKENBIT 0x70400 +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DSPCCNTR 0x72180 +#define DISPLAY_PLANE_ENABLE (1 << 31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1 << 30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf << 26) +#define DISPPLANE_8BPP (0x2 << 26) +#define DISPPLANE_15_16BPP (0x4 << 26) +#define DISPPLANE_16BPP (0x5 << 26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6 << 26) +#define DISPPLANE_32BPP (0x7 << 26) +#define DISPPLANE_STEREO_ENABLE (1 << 25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1 << 24) +#define DISPPLANE_SEL_PIPE_POS 24 +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1 << 24) +#define DISPPLANE_SRC_KEY_ENABLE (1 << 22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1 << 20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1 << 18) +/* plane B only */ +#define DISPPLANE_ALPHA_TRANS_ENABLE (1 << 15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) +#define DISPPLANE_BOTTOM (4) + +#define DSPABASE 0x70184 +#define DSPALINOFF 0x70184 +#define DSPASTRIDE 0x70188 + +#define DSPBBASE 0x71184 +#define DSPBLINOFF 0X71184 +#define DSPBADDR DSPBBASE +#define DSPBSTRIDE 0x71188 + +#define DSPCBASE 0x72184 +#define DSPCLINOFF 0x72184 +#define DSPCSTRIDE 0x72188 + +#define DSPAKEYVAL 0x70194 +#define DSPAKEYMASK 0x70198 + +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 +#define DSPCPOS 0x7218C +#define DSPCSIZE 0x72190 + +#define DSPASURF 0x7019C +#define DSPATILEOFF 0x701A4 + +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +#define DSPCSURF 0x7219C +#define DSPCTILEOFF 0x721A4 +#define DSPCKEYMAXVAL 0x721A0 +#define DSPCKEYMINVAL 0x72194 +#define DSPCKEYMSK 0x72198 + +#define VGACNTRL 0x71400 +#define VGA_DISP_DISABLE (1 << 31) +#define VGA_2X_MODE (1 << 30) +#define VGA_PIPE_B_SELECT (1 << 29) + +/* + * Overlay registers + */ +#define OV_C_OFFSET 0x08000 +#define OV_OVADD 0x30000 +#define OV_DOVASTA 0x30008 +# define OV_PIPE_SELECT ((1 << 6)|(1 << 7)) +# define OV_PIPE_SELECT_POS 6 +# define OV_PIPE_A 0 +# define OV_PIPE_C 1 +#define OV_OGAMC5 0x30010 +#define OV_OGAMC4 0x30014 +#define OV_OGAMC3 0x30018 +#define OV_OGAMC2 0x3001C +#define OV_OGAMC1 0x30020 +#define OV_OGAMC0 0x30024 +#define OVC_OVADD 0x38000 +#define OVC_DOVCSTA 0x38008 +#define OVC_OGAMC5 0x38010 +#define OVC_OGAMC4 0x38014 +#define OVC_OGAMC3 0x38018 +#define OVC_OGAMC2 0x3801C +#define OVC_OGAMC1 0x38020 +#define OVC_OGAMC0 0x38024 + +/* + * Some BIOS scratch area registers. The 845 (and 830?) store the amount + * of video memory available to the BIOS in SWF1. + */ +#define SWF0 0x71410 +#define SWF1 0x71414 +#define SWF2 0x71418 +#define SWF3 0x7141c +#define SWF4 0x71420 +#define SWF5 0x71424 +#define SWF6 0x71428 + +/* + * 855 scratch registers. + */ +#define SWF00 0x70410 +#define SWF01 0x70414 +#define SWF02 0x70418 +#define SWF03 0x7041c +#define SWF04 0x70420 +#define SWF05 0x70424 +#define SWF06 0x70428 + +#define SWF10 SWF0 +#define SWF11 SWF1 +#define SWF12 SWF2 +#define SWF13 SWF3 +#define SWF14 SWF4 +#define SWF15 SWF5 +#define SWF16 SWF6 + +#define SWF30 0x72414 +#define SWF31 0x72418 +#define SWF32 0x7241c + + +/* + * Palette registers + */ +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 +#define PALETTE_C 0x0ac00 + +/* Cursor A & B regs */ +#define CURACNTR 0x70080 +#define CURSOR_MODE_DISABLE 0x00 +#define CURSOR_MODE_64_32B_AX 0x07 +#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) +#define MCURSOR_GAMMA_ENABLE (1 << 26) +#define CURABASE 0x70084 +#define CURAPOS 0x70088 +#define CURSOR_POS_MASK 0x007FF +#define CURSOR_POS_SIGN 0x8000 +#define CURSOR_X_SHIFT 0 +#define CURSOR_Y_SHIFT 16 +#define CURBCNTR 0x700c0 +#define CURBBASE 0x700c4 +#define CURBPOS 0x700c8 +#define CURCCNTR 0x700e0 +#define CURCBASE 0x700e4 +#define CURCPOS 0x700e8 + +/* + * Interrupt Registers + */ +#define IER 0x020a0 +#define IIR 0x020a4 +#define IMR 0x020a8 +#define ISR 0x020ac + +/* + * MOORESTOWN delta registers + */ +#define MRST_DPLL_A 0x0f014 +#define DPLLA_MODE_LVDS (2 << 26) /* mrst */ +#define MRST_FPA0 0x0f040 +#define MRST_FPA1 0x0f044 +#define MRST_PERF_MODE 0x020f4 + +/* + * MEDFIELD HDMI registers + */ +#define HDMIPHYMISCCTL 0x61134 +#define HDMI_PHY_POWER_DOWN 0x7f +#define HDMIB_CONTROL 0x61140 +#define HDMIB_PORT_EN (1 << 31) +#define HDMIB_PIPE_B_SELECT (1 << 30) +#define HDMIB_NULL_PACKET (1 << 9) +#define HDMIB_HDCP_PORT (1 << 5) + +/* #define LVDS 0x61180 */ +#define MRST_PANEL_8TO6_DITHER_ENABLE (1 << 25) +#define MRST_PANEL_24_DOT_1_FORMAT (1 << 24) +#define LVDS_A3_POWER_UP_0_OUTPUT (1 << 6) + +#define MIPI 0x61190 +#define MIPI_C 0x62190 +#define MIPI_PORT_EN (1 << 31) +/* Turns on border drawing to allow centered display. */ +#define SEL_FLOPPED_HSTX (1 << 23) +#define PASS_FROM_SPHY_TO_AFE (1 << 16) +#define MIPI_BORDER_EN (1 << 15) +#define MIPIA_3LANE_MIPIC_1LANE 0x1 +#define MIPIA_2LANE_MIPIC_2LANE 0x2 +#define TE_TRIGGER_DSI_PROTOCOL (1 << 2) +#define TE_TRIGGER_GPIO_PIN (1 << 3) +#define MIPI_TE_COUNT 0x61194 + +/* #define PP_CONTROL 0x61204 */ +#define POWER_DOWN_ON_RESET (1 << 1) + +/* #define PFIT_CONTROL 0x61230 */ +#define PFIT_PIPE_SELECT (3 << 29) +#define PFIT_PIPE_SELECT_SHIFT (29) + +/* #define BLC_PWM_CTL 0x61254 */ +#define MRST_BACKLIGHT_MODULATION_FREQ_SHIFT (16) +#define MRST_BACKLIGHT_MODULATION_FREQ_MASK (0xffff << 16) + +/* #define PIPEACONF 0x70008 */ +#define PIPEACONF_PIPE_STATE (1 << 30) +/* #define DSPACNTR 0x70180 */ + +#define MRST_DSPABASE 0x7019c +#define MRST_DSPBBASE 0x7119c + +/* + * Moorestown registers. + */ + +/* + * MIPI IP registers + */ +#define MIPIC_REG_OFFSET 0x800 + +#define DEVICE_READY_REG 0xb000 +#define LP_OUTPUT_HOLD (1 << 16) +#define EXIT_ULPS_DEV_READY 0x3 +#define LP_OUTPUT_HOLD_RELEASE 0x810000 +# define ENTERING_ULPS (2 << 1) +# define EXITING_ULPS (1 << 1) +# define ULPS_MASK (3 << 1) +# define BUS_POSSESSION (1 << 3) +#define INTR_STAT_REG 0xb004 +#define RX_SOT_ERROR (1 << 0) +#define RX_SOT_SYNC_ERROR (1 << 1) +#define RX_ESCAPE_MODE_ENTRY_ERROR (1 << 3) +#define RX_LP_TX_SYNC_ERROR (1 << 4) +#define RX_HS_RECEIVE_TIMEOUT_ERROR (1 << 5) +#define RX_FALSE_CONTROL_ERROR (1 << 6) +#define RX_ECC_SINGLE_BIT_ERROR (1 << 7) +#define RX_ECC_MULTI_BIT_ERROR (1 << 8) +#define RX_CHECKSUM_ERROR (1 << 9) +#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 10) +#define RX_DSI_VC_ID_INVALID (1 << 11) +#define TX_FALSE_CONTROL_ERROR (1 << 12) +#define TX_ECC_SINGLE_BIT_ERROR (1 << 13) +#define TX_ECC_MULTI_BIT_ERROR (1 << 14) +#define TX_CHECKSUM_ERROR (1 << 15) +#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 16) +#define TX_DSI_VC_ID_INVALID (1 << 17) +#define HIGH_CONTENTION (1 << 18) +#define LOW_CONTENTION (1 << 19) +#define DPI_FIFO_UNDER_RUN (1 << 20) +#define HS_TX_TIMEOUT (1 << 21) +#define LP_RX_TIMEOUT (1 << 22) +#define TURN_AROUND_ACK_TIMEOUT (1 << 23) +#define ACK_WITH_NO_ERROR (1 << 24) +#define HS_GENERIC_WR_FIFO_FULL (1 << 27) +#define LP_GENERIC_WR_FIFO_FULL (1 << 28) +#define SPL_PKT_SENT (1 << 30) +#define INTR_EN_REG 0xb008 +#define DSI_FUNC_PRG_REG 0xb00c +#define DPI_CHANNEL_NUMBER_POS 0x03 +#define DBI_CHANNEL_NUMBER_POS 0x05 +#define FMT_DPI_POS 0x07 +#define FMT_DBI_POS 0x0A +#define DBI_DATA_WIDTH_POS 0x0D + +/* DPI PIXEL FORMATS */ +#define RGB_565_FMT 0x01 /* RGB 565 FORMAT */ +#define RGB_666_FMT 0x02 /* RGB 666 FORMAT */ +#define LRGB_666_FMT 0x03 /* RGB LOOSELY PACKED + * 666 FORMAT + */ +#define RGB_888_FMT 0x04 /* RGB 888 FORMAT */ +#define VIRTUAL_CHANNEL_NUMBER_0 0x00 /* Virtual channel 0 */ +#define VIRTUAL_CHANNEL_NUMBER_1 0x01 /* Virtual channel 1 */ +#define VIRTUAL_CHANNEL_NUMBER_2 0x02 /* Virtual channel 2 */ +#define VIRTUAL_CHANNEL_NUMBER_3 0x03 /* Virtual channel 3 */ + +#define DBI_NOT_SUPPORTED 0x00 /* command mode + * is not supported + */ +#define DBI_DATA_WIDTH_16BIT 0x01 /* 16 bit data */ +#define DBI_DATA_WIDTH_9BIT 0x02 /* 9 bit data */ +#define DBI_DATA_WIDTH_8BIT 0x03 /* 8 bit data */ +#define DBI_DATA_WIDTH_OPT1 0x04 /* option 1 */ +#define DBI_DATA_WIDTH_OPT2 0x05 /* option 2 */ + +#define HS_TX_TIMEOUT_REG 0xb010 +#define LP_RX_TIMEOUT_REG 0xb014 +#define TURN_AROUND_TIMEOUT_REG 0xb018 +#define DEVICE_RESET_REG 0xb01C +#define DPI_RESOLUTION_REG 0xb020 +#define RES_V_POS 0x10 +#define HORIZ_SYNC_PAD_COUNT_REG 0xb028 +#define HORIZ_BACK_PORCH_COUNT_REG 0xb02C +#define HORIZ_FRONT_PORCH_COUNT_REG 0xb030 +#define HORIZ_ACTIVE_AREA_COUNT_REG 0xb034 +#define VERT_SYNC_PAD_COUNT_REG 0xb038 +#define VERT_BACK_PORCH_COUNT_REG 0xb03c +#define VERT_FRONT_PORCH_COUNT_REG 0xb040 +#define HIGH_LOW_SWITCH_COUNT_REG 0xb044 +#define DPI_CONTROL_REG 0xb048 +#define DPI_SHUT_DOWN (1 << 0) +#define DPI_TURN_ON (1 << 1) +#define DPI_COLOR_MODE_ON (1 << 2) +#define DPI_COLOR_MODE_OFF (1 << 3) +#define DPI_BACK_LIGHT_ON (1 << 4) +#define DPI_BACK_LIGHT_OFF (1 << 5) +#define DPI_LP (1 << 6) +#define DPI_DATA_REG 0xb04c +#define DPI_BACK_LIGHT_ON_DATA 0x07 +#define DPI_BACK_LIGHT_OFF_DATA 0x17 +#define INIT_COUNT_REG 0xb050 +#define MAX_RET_PAK_REG 0xb054 +#define VIDEO_FMT_REG 0xb058 +#define COMPLETE_LAST_PCKT (1 << 2) +#define EOT_DISABLE_REG 0xb05c +#define ENABLE_CLOCK_STOPPING (1 << 1) +#define LP_BYTECLK_REG 0xb060 +#define LP_GEN_DATA_REG 0xb064 +#define HS_GEN_DATA_REG 0xb068 +#define LP_GEN_CTRL_REG 0xb06C +#define HS_GEN_CTRL_REG 0xb070 +#define DCS_CHANNEL_NUMBER_POS 0x6 +#define MCS_COMMANDS_POS 0x8 +#define WORD_COUNTS_POS 0x8 +#define MCS_PARAMETER_POS 0x10 +#define GEN_FIFO_STAT_REG 0xb074 +#define HS_DATA_FIFO_FULL (1 << 0) +#define HS_DATA_FIFO_HALF_EMPTY (1 << 1) +#define HS_DATA_FIFO_EMPTY (1 << 2) +#define LP_DATA_FIFO_FULL (1 << 8) +#define LP_DATA_FIFO_HALF_EMPTY (1 << 9) +#define LP_DATA_FIFO_EMPTY (1 << 10) +#define HS_CTRL_FIFO_FULL (1 << 16) +#define HS_CTRL_FIFO_HALF_EMPTY (1 << 17) +#define HS_CTRL_FIFO_EMPTY (1 << 18) +#define LP_CTRL_FIFO_FULL (1 << 24) +#define LP_CTRL_FIFO_HALF_EMPTY (1 << 25) +#define LP_CTRL_FIFO_EMPTY (1 << 26) +#define DBI_FIFO_EMPTY (1 << 27) +#define DPI_FIFO_EMPTY (1 << 28) +#define HS_LS_DBI_ENABLE_REG 0xb078 +#define TXCLKESC_REG 0xb07c +#define DPHY_PARAM_REG 0xb080 +#define DBI_BW_CTRL_REG 0xb084 +#define CLK_LANE_SWT_REG 0xb088 + +/* + * MIPI Adapter registers + */ +#define MIPI_CONTROL_REG 0xb104 +#define MIPI_2X_CLOCK_BITS ((1 << 0) | (1 << 1)) +#define MIPI_DATA_ADDRESS_REG 0xb108 +#define MIPI_DATA_LENGTH_REG 0xb10C +#define MIPI_COMMAND_ADDRESS_REG 0xb110 +#define MIPI_COMMAND_LENGTH_REG 0xb114 +#define MIPI_READ_DATA_RETURN_REG0 0xb118 +#define MIPI_READ_DATA_RETURN_REG1 0xb11C +#define MIPI_READ_DATA_RETURN_REG2 0xb120 +#define MIPI_READ_DATA_RETURN_REG3 0xb124 +#define MIPI_READ_DATA_RETURN_REG4 0xb128 +#define MIPI_READ_DATA_RETURN_REG5 0xb12C +#define MIPI_READ_DATA_RETURN_REG6 0xb130 +#define MIPI_READ_DATA_RETURN_REG7 0xb134 +#define MIPI_READ_DATA_VALID_REG 0xb138 + +/* DBI COMMANDS */ +#define soft_reset 0x01 +/* + * The display module performs a software reset. + * Registers are written with their SW Reset default values. + */ +#define get_power_mode 0x0a +/* + * The display module returns the current power mode + */ +#define get_address_mode 0x0b +/* + * The display module returns the current status. + */ +#define get_pixel_format 0x0c +/* + * This command gets the pixel format for the RGB image data + * used by the interface. + */ +#define get_display_mode 0x0d +/* + * The display module returns the Display Image Mode status. + */ +#define get_signal_mode 0x0e +/* + * The display module returns the Display Signal Mode. + */ +#define get_diagnostic_result 0x0f +/* + * The display module returns the self-diagnostic results following + * a Sleep Out command. + */ +#define enter_sleep_mode 0x10 +/* + * This command causes the display module to enter the Sleep mode. + * In this mode, all unnecessary blocks inside the display module are + * disabled except interface communication. This is the lowest power + * mode the display module supports. + */ +#define exit_sleep_mode 0x11 +/* + * This command causes the display module to exit Sleep mode. + * All blocks inside the display module are enabled. + */ +#define enter_partial_mode 0x12 +/* + * This command causes the display module to enter the Partial Display + * Mode. The Partial Display Mode window is described by the + * set_partial_area command. + */ +#define enter_normal_mode 0x13 +/* + * This command causes the display module to enter the Normal mode. + * Normal Mode is defined as Partial Display mode and Scroll mode are off + */ +#define exit_invert_mode 0x20 +/* + * This command causes the display module to stop inverting the image + * data on the display device. The frame memory contents remain unchanged. + * No status bits are changed. + */ +#define enter_invert_mode 0x21 +/* + * This command causes the display module to invert the image data only on + * the display device. The frame memory contents remain unchanged. + * No status bits are changed. + */ +#define set_gamma_curve 0x26 +/* + * This command selects the desired gamma curve for the display device. + * Four fixed gamma curves are defined in section DCS spec. + */ +#define set_display_off 0x28 +/* ************************************************************************* *\ +This command causes the display module to stop displaying the image data +on the display device. The frame memory contents remain unchanged. +No status bits are changed. +\* ************************************************************************* */ +#define set_display_on 0x29 +/* ************************************************************************* *\ +This command causes the display module to start displaying the image data +on the display device. The frame memory contents remain unchanged. +No status bits are changed. +\* ************************************************************************* */ +#define set_column_address 0x2a +/* + * This command defines the column extent of the frame memory accessed by + * the hostprocessor with the read_memory_continue and + * write_memory_continue commands. + * No status bits are changed. + */ +#define set_page_addr 0x2b +/* + * This command defines the page extent of the frame memory accessed by + * the host processor with the write_memory_continue and + * read_memory_continue command. + * No status bits are changed. + */ +#define write_mem_start 0x2c +/* + * This command transfers image data from the host processor to the + * display modules frame memory starting at the pixel location specified + * by preceding set_column_address and set_page_address commands. + */ +#define set_partial_area 0x30 +/* + * This command defines the Partial Display mode s display area. + * There are two parameters associated with this command, the first + * defines the Start Row (SR) and the second the End Row (ER). SR and ER + * refer to the Frame Memory Line Pointer. + */ +#define set_scroll_area 0x33 +/* + * This command defines the display modules Vertical Scrolling Area. + */ +#define set_tear_off 0x34 +/* + * This command turns off the display modules Tearing Effect output + * signal on the TE signal line. + */ +#define set_tear_on 0x35 +/* + * This command turns on the display modules Tearing Effect output signal + * on the TE signal line. + */ +#define set_address_mode 0x36 +/* + * This command sets the data order for transfers from the host processor + * to display modules frame memory,bits B[7:5] and B3, and from the + * display modules frame memory to the display device, bits B[2:0] and B4. + */ +#define set_scroll_start 0x37 +/* + * This command sets the start of the vertical scrolling area in the frame + * memory. The vertical scrolling area is fully defined when this command + * is used with the set_scroll_area command The set_scroll_start command + * has one parameter, the Vertical Scroll Pointer. The VSP defines the + * line in the frame memory that is written to the display device as the + * first line of the vertical scroll area. + */ +#define exit_idle_mode 0x38 +/* + * This command causes the display module to exit Idle mode. + */ +#define enter_idle_mode 0x39 +/* + * This command causes the display module to enter Idle Mode. + * In Idle Mode, color expression is reduced. Colors are shown on the + * display device using the MSB of each of the R, G and B color + * components in the frame memory + */ +#define set_pixel_format 0x3a +/* + * This command sets the pixel format for the RGB image data used by the + * interface. + * Bits D[6:4] DPI Pixel Format Definition + * Bits D[2:0] DBI Pixel Format Definition + * Bits D7 and D3 are not used. + */ +#define DCS_PIXEL_FORMAT_3bpp 0x1 +#define DCS_PIXEL_FORMAT_8bpp 0x2 +#define DCS_PIXEL_FORMAT_12bpp 0x3 +#define DCS_PIXEL_FORMAT_16bpp 0x5 +#define DCS_PIXEL_FORMAT_18bpp 0x6 +#define DCS_PIXEL_FORMAT_24bpp 0x7 + +#define write_mem_cont 0x3c + +/* + * This command transfers image data from the host processor to the + * display module's frame memory continuing from the pixel location + * following the previous write_memory_continue or write_memory_start + * command. + */ +#define set_tear_scanline 0x44 +/* + * This command turns on the display modules Tearing Effect output signal + * on the TE signal line when the display module reaches line N. + */ +#define get_scanline 0x45 +/* + * The display module returns the current scanline, N, used to update the + * display device. The total number of scanlines on a display device is + * defined as VSYNC + VBP + VACT + VFP.The first scanline is defined as + * the first line of V Sync and is denoted as Line 0. + * When in Sleep Mode, the value returned by get_scanline is undefined. + */ + +/* MCS or Generic COMMANDS */ +/* MCS/generic data type */ +#define GEN_SHORT_WRITE_0 0x03 /* generic short write, no parameters */ +#define GEN_SHORT_WRITE_1 0x13 /* generic short write, 1 parameters */ +#define GEN_SHORT_WRITE_2 0x23 /* generic short write, 2 parameters */ +#define GEN_READ_0 0x04 /* generic read, no parameters */ +#define GEN_READ_1 0x14 /* generic read, 1 parameters */ +#define GEN_READ_2 0x24 /* generic read, 2 parameters */ +#define GEN_LONG_WRITE 0x29 /* generic long write */ +#define MCS_SHORT_WRITE_0 0x05 /* MCS short write, no parameters */ +#define MCS_SHORT_WRITE_1 0x15 /* MCS short write, 1 parameters */ +#define MCS_READ 0x06 /* MCS read, no parameters */ +#define MCS_LONG_WRITE 0x39 /* MCS long write */ +/* MCS/generic commands */ +/* TPO MCS */ +#define write_display_profile 0x50 +#define write_display_brightness 0x51 +#define write_ctrl_display 0x53 +#define write_ctrl_cabc 0x55 + #define UI_IMAGE 0x01 + #define STILL_IMAGE 0x02 + #define MOVING_IMAGE 0x03 +#define write_hysteresis 0x57 +#define write_gamma_setting 0x58 +#define write_cabc_min_bright 0x5e +#define write_kbbc_profile 0x60 +/* TMD MCS */ +#define tmd_write_display_brightness 0x8c + +/* + * This command is used to control ambient light, panel backlight + * brightness and gamma settings. + */ +#define BRIGHT_CNTL_BLOCK_ON (1 << 5) +#define AMBIENT_LIGHT_SENSE_ON (1 << 4) +#define DISPLAY_DIMMING_ON (1 << 3) +#define BACKLIGHT_ON (1 << 2) +#define DISPLAY_BRIGHTNESS_AUTO (1 << 1) +#define GAMMA_AUTO (1 << 0) + +/* DCS Interface Pixel Formats */ +#define DCS_PIXEL_FORMAT_3BPP 0x1 +#define DCS_PIXEL_FORMAT_8BPP 0x2 +#define DCS_PIXEL_FORMAT_12BPP 0x3 +#define DCS_PIXEL_FORMAT_16BPP 0x5 +#define DCS_PIXEL_FORMAT_18BPP 0x6 +#define DCS_PIXEL_FORMAT_24BPP 0x7 +/* ONE PARAMETER READ DATA */ +#define addr_mode_data 0xfc +#define diag_res_data 0x00 +#define disp_mode_data 0x23 +#define pxl_fmt_data 0x77 +#define pwr_mode_data 0x74 +#define sig_mode_data 0x00 +/* TWO PARAMETERS READ DATA */ +#define scanline_data1 0xff +#define scanline_data2 0xff +#define NON_BURST_MODE_SYNC_PULSE 0x01 /* Non Burst Mode + * with Sync Pulse + */ +#define NON_BURST_MODE_SYNC_EVENTS 0x02 /* Non Burst Mode + * with Sync events + */ +#define BURST_MODE 0x03 /* Burst Mode */ +#define DBI_COMMAND_BUFFER_SIZE 0x240 /* 0x32 */ /* 0x120 */ + /* Allocate at least + * 0x100 Byte with 32 + * byte alignment + */ +#define DBI_DATA_BUFFER_SIZE 0x120 /* Allocate at least + * 0x100 Byte with 32 + * byte alignment + */ +#define DBI_CB_TIME_OUT 0xFFFF + +#define GEN_FB_TIME_OUT 2000 + +#define SKU_83 0x01 +#define SKU_100 0x02 +#define SKU_100L 0x04 +#define SKU_BYPASS 0x08 + +/* Some handy macros for playing with bitfields. */ +#define PSB_MASK(high, low) (((1<<((high)-(low)+1))-1)<<(low)) +#define SET_FIELD(value, field) (((value) << field ## _SHIFT) & field ## _MASK) +#define GET_FIELD(word, field) (((word) & field ## _MASK) >> field ## _SHIFT) + +#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) + +/* PCI config space */ + +#define SB_PCKT 0x02100 /* cedarview */ +# define SB_OPCODE_MASK PSB_MASK(31, 16) +# define SB_OPCODE_SHIFT 16 +# define SB_OPCODE_READ 0 +# define SB_OPCODE_WRITE 1 +# define SB_DEST_MASK PSB_MASK(15, 8) +# define SB_DEST_SHIFT 8 +# define SB_DEST_DPLL 0x88 +# define SB_BYTE_ENABLE_MASK PSB_MASK(7, 4) +# define SB_BYTE_ENABLE_SHIFT 4 +# define SB_BUSY (1 << 0) + +#define DSPCLK_GATE_D 0x6200 +# define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* Fixed value on CDV */ +# define DPOUNIT_CLOCK_GATE_DISABLE (1 << 11) +# define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) +# define DPUNIT_PIPEB_GATE_DISABLE (1 << 30) +# define DPUNIT_PIPEA_GATE_DISABLE (1 << 25) +# define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) +# define DPLSUNIT_CLOCK_GATE_DISABLE (1 << 13) + +#define RAMCLK_GATE_D 0x6210 + +/* 32-bit value read/written from the DPIO reg. */ +#define SB_DATA 0x02104 /* cedarview */ +/* 32-bit address of the DPIO reg to be read/written. */ +#define SB_ADDR 0x02108 /* cedarview */ +#define DPIO_CFG 0x02110 /* cedarview */ +# define DPIO_MODE_SELECT_1 (1 << 3) +# define DPIO_MODE_SELECT_0 (1 << 2) +# define DPIO_SFR_BYPASS (1 << 1) +/* reset is active low */ +# define DPIO_CMN_RESET_N (1 << 0) + +/* Cedarview sideband registers */ +#define _SB_M_A 0x8008 +#define _SB_M_B 0x8028 +#define SB_M(pipe) _PIPE(pipe, _SB_M_A, _SB_M_B) +# define SB_M_DIVIDER_MASK (0xFF << 24) +# define SB_M_DIVIDER_SHIFT 24 + +#define _SB_N_VCO_A 0x8014 +#define _SB_N_VCO_B 0x8034 +#define SB_N_VCO(pipe) _PIPE(pipe, _SB_N_VCO_A, _SB_N_VCO_B) +#define SB_N_VCO_SEL_MASK PSB_MASK(31, 30) +#define SB_N_VCO_SEL_SHIFT 30 +#define SB_N_DIVIDER_MASK PSB_MASK(29, 26) +#define SB_N_DIVIDER_SHIFT 26 +#define SB_N_CB_TUNE_MASK PSB_MASK(25, 24) +#define SB_N_CB_TUNE_SHIFT 24 + +/* the bit 14:13 is used to select between the different reference clock for Pipe A/B */ +#define SB_REF_DPLLA 0x8010 +#define SB_REF_DPLLB 0x8030 +#define REF_CLK_MASK (0x3 << 13) +#define REF_CLK_CORE (0 << 13) +#define REF_CLK_DPLL (1 << 13) +#define REF_CLK_DPLLA (2 << 13) +/* For the DPLL B, it will use the reference clk from DPLL A when using (2 << 13) */ + +#define _SB_REF_A 0x8018 +#define _SB_REF_B 0x8038 +#define SB_REF_SFR(pipe) _PIPE(pipe, _SB_REF_A, _SB_REF_B) + +#define _SB_P_A 0x801c +#define _SB_P_B 0x803c +#define SB_P(pipe) _PIPE(pipe, _SB_P_A, _SB_P_B) +#define SB_P2_DIVIDER_MASK PSB_MASK(31, 30) +#define SB_P2_DIVIDER_SHIFT 30 +#define SB_P2_10 0 /* HDMI, DP, DAC */ +#define SB_P2_5 1 /* DAC */ +#define SB_P2_14 2 /* LVDS single */ +#define SB_P2_7 3 /* LVDS double */ +#define SB_P1_DIVIDER_MASK PSB_MASK(15, 12) +#define SB_P1_DIVIDER_SHIFT 12 + +#define PSB_LANE0 0x120 +#define PSB_LANE1 0x220 +#define PSB_LANE2 0x2320 +#define PSB_LANE3 0x2420 + +#define LANE_PLL_MASK (0x7 << 20) +#define LANE_PLL_ENABLE (0x3 << 20) +#define LANE_PLL_PIPE(p) (((p) == 0) ? (1 << 21) : (0 << 21)) + +#define DP_B 0x64100 +#define DP_C 0x64200 + +#define DP_PORT_EN (1 << 31) +#define DP_PIPEB_SELECT (1 << 30) +#define DP_PIPE_MASK (1 << 30) + +/* Link training mode - select a suitable mode for each stage */ +#define DP_LINK_TRAIN_PAT_1 (0 << 28) +#define DP_LINK_TRAIN_PAT_2 (1 << 28) +#define DP_LINK_TRAIN_PAT_IDLE (2 << 28) +#define DP_LINK_TRAIN_OFF (3 << 28) +#define DP_LINK_TRAIN_MASK (3 << 28) +#define DP_LINK_TRAIN_SHIFT 28 + +/* Signal voltages. These are mostly controlled by the other end */ +#define DP_VOLTAGE_0_4 (0 << 25) +#define DP_VOLTAGE_0_6 (1 << 25) +#define DP_VOLTAGE_0_8 (2 << 25) +#define DP_VOLTAGE_1_2 (3 << 25) +#define DP_VOLTAGE_MASK (7 << 25) +#define DP_VOLTAGE_SHIFT 25 + +/* Signal pre-emphasis levels, like voltages, the other end tells us what + * they want + */ +#define DP_PRE_EMPHASIS_0 (0 << 22) +#define DP_PRE_EMPHASIS_3_5 (1 << 22) +#define DP_PRE_EMPHASIS_6 (2 << 22) +#define DP_PRE_EMPHASIS_9_5 (3 << 22) +#define DP_PRE_EMPHASIS_MASK (7 << 22) +#define DP_PRE_EMPHASIS_SHIFT 22 + +/* How many wires to use. I guess 3 was too hard */ +#define DP_PORT_WIDTH_1 (0 << 19) +#define DP_PORT_WIDTH_2 (1 << 19) +#define DP_PORT_WIDTH_4 (3 << 19) +#define DP_PORT_WIDTH_MASK (7 << 19) + +/* Mystic DPCD version 1.1 special mode */ +#define DP_ENHANCED_FRAMING (1 << 18) + +/** locked once port is enabled */ +#define DP_PORT_REVERSAL (1 << 15) + +/** sends the clock on lane 15 of the PEG for debug */ +#define DP_CLOCK_OUTPUT_ENABLE (1 << 13) + +#define DP_SCRAMBLING_DISABLE (1 << 12) +#define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7) + +/** limit RGB values to avoid confusing TVs */ +#define DP_COLOR_RANGE_16_235 (1 << 8) + +/** Turn on the audio link */ +#define DP_AUDIO_OUTPUT_ENABLE (1 << 6) + +/** vs and hs sync polarity */ +#define DP_SYNC_VS_HIGH (1 << 4) +#define DP_SYNC_HS_HIGH (1 << 3) + +/** A fantasy */ +#define DP_DETECTED (1 << 2) + +/** The aux channel provides a way to talk to the + * signal sink for DDC etc. Max packet size supported + * is 20 bytes in each direction, hence the 5 fixed + * data registers + */ +#define DPB_AUX_CH_CTL 0x64110 +#define DPB_AUX_CH_DATA1 0x64114 +#define DPB_AUX_CH_DATA2 0x64118 +#define DPB_AUX_CH_DATA3 0x6411c +#define DPB_AUX_CH_DATA4 0x64120 +#define DPB_AUX_CH_DATA5 0x64124 + +#define DPC_AUX_CH_CTL 0x64210 +#define DPC_AUX_CH_DATA1 0x64214 +#define DPC_AUX_CH_DATA2 0x64218 +#define DPC_AUX_CH_DATA3 0x6421c +#define DPC_AUX_CH_DATA4 0x64220 +#define DPC_AUX_CH_DATA5 0x64224 + +#define DP_AUX_CH_CTL_SEND_BUSY (1 << 31) +#define DP_AUX_CH_CTL_DONE (1 << 30) +#define DP_AUX_CH_CTL_INTERRUPT (1 << 29) +#define DP_AUX_CH_CTL_TIME_OUT_ERROR (1 << 28) +#define DP_AUX_CH_CTL_TIME_OUT_400us (0 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_600us (1 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_800us (2 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_1600us (3 << 26) +#define DP_AUX_CH_CTL_TIME_OUT_MASK (3 << 26) +#define DP_AUX_CH_CTL_RECEIVE_ERROR (1 << 25) +#define DP_AUX_CH_CTL_MESSAGE_SIZE_MASK (0x1f << 20) +#define DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT 20 +#define DP_AUX_CH_CTL_PRECHARGE_2US_MASK (0xf << 16) +#define DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT 16 +#define DP_AUX_CH_CTL_AUX_AKSV_SELECT (1 << 15) +#define DP_AUX_CH_CTL_MANCHESTER_TEST (1 << 14) +#define DP_AUX_CH_CTL_SYNC_TEST (1 << 13) +#define DP_AUX_CH_CTL_DEGLITCH_TEST (1 << 12) +#define DP_AUX_CH_CTL_PRECHARGE_TEST (1 << 11) +#define DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK (0x7ff) +#define DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT 0 + +/* + * Computing GMCH M and N values for the Display Port link + * + * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes + * + * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz) + * + * The GMCH value is used internally + * + * bytes_per_pixel is the number of bytes coming out of the plane, + * which is after the LUTs, so we want the bytes for our color format. + * For our current usage, this is always 3, one byte for R, G and B. + */ + +#define _PIPEA_GMCH_DATA_M 0x70050 +#define _PIPEB_GMCH_DATA_M 0x71050 + +/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */ +#define PIPE_GMCH_DATA_M_TU_SIZE_MASK (0x3f << 25) +#define PIPE_GMCH_DATA_M_TU_SIZE_SHIFT 25 + +#define PIPE_GMCH_DATA_M_MASK (0xffffff) + +#define _PIPEA_GMCH_DATA_N 0x70054 +#define _PIPEB_GMCH_DATA_N 0x71054 +#define PIPE_GMCH_DATA_N_MASK (0xffffff) + +/* + * Computing Link M and N values for the Display Port link + * + * Link M / N = pixel_clock / ls_clk + * + * (the DP spec calls pixel_clock the 'strm_clk') + * + * The Link value is transmitted in the Main Stream + * Attributes and VB-ID. + */ + +#define _PIPEA_DP_LINK_M 0x70060 +#define _PIPEB_DP_LINK_M 0x71060 +#define PIPEA_DP_LINK_M_MASK (0xffffff) + +#define _PIPEA_DP_LINK_N 0x70064 +#define _PIPEB_DP_LINK_N 0x71064 +#define PIPEA_DP_LINK_N_MASK (0xffffff) + +#define PIPE_GMCH_DATA_M(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_M, _PIPEB_GMCH_DATA_M) +#define PIPE_GMCH_DATA_N(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_N, _PIPEB_GMCH_DATA_N) +#define PIPE_DP_LINK_M(pipe) _PIPE(pipe, _PIPEA_DP_LINK_M, _PIPEB_DP_LINK_M) +#define PIPE_DP_LINK_N(pipe) _PIPE(pipe, _PIPEA_DP_LINK_N, _PIPEB_DP_LINK_N) + +#define PIPE_BPC_MASK (7 << 5) +#define PIPE_8BPC (0 << 5) +#define PIPE_10BPC (1 << 5) +#define PIPE_6BPC (2 << 5) + +#endif diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c new file mode 100644 index 000000000..bdced46dd --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c @@ -0,0 +1,2525 @@ +/* + * Copyright 2006 Dave Airlie <airlied@linux.ie> + * Copyright © 2006-2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_edid.h> + +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "psb_intel_sdvo_regs.h" + +#define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1) +#define SDVO_RGB_MASK (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1) +#define SDVO_LVDS_MASK (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1) +#define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0) + +#define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\ + SDVO_TV_MASK) + +#define IS_TV(c) (c->output_flag & SDVO_TV_MASK) +#define IS_TMDS(c) (c->output_flag & SDVO_TMDS_MASK) +#define IS_LVDS(c) (c->output_flag & SDVO_LVDS_MASK) +#define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK)) + + +static const char *tv_format_names[] = { + "NTSC_M" , "NTSC_J" , "NTSC_443", + "PAL_B" , "PAL_D" , "PAL_G" , + "PAL_H" , "PAL_I" , "PAL_M" , + "PAL_N" , "PAL_NC" , "PAL_60" , + "SECAM_B" , "SECAM_D" , "SECAM_G" , + "SECAM_K" , "SECAM_K1", "SECAM_L" , + "SECAM_60" +}; + +struct psb_intel_sdvo { + struct gma_encoder base; + + struct i2c_adapter *i2c; + u8 slave_addr; + + struct i2c_adapter ddc; + + /* Register for the SDVO device: SDVOB or SDVOC */ + int sdvo_reg; + + /* Active outputs controlled by this SDVO output */ + uint16_t controlled_output; + + /* + * Capabilities of the SDVO device returned by + * i830_sdvo_get_capabilities() + */ + struct psb_intel_sdvo_caps caps; + + /* Pixel clock limitations reported by the SDVO device, in kHz */ + int pixel_clock_min, pixel_clock_max; + + /* + * For multiple function SDVO device, + * this is for current attached outputs. + */ + uint16_t attached_output; + + /** + * This is used to select the color range of RBG outputs in HDMI mode. + * It is only valid when using TMDS encoding and 8 bit per color mode. + */ + uint32_t color_range; + + /** + * This is set if we're going to treat the device as TV-out. + * + * While we have these nice friendly flags for output types that ought + * to decide this for us, the S-Video output on our HDMI+S-Video card + * shows up as RGB1 (VGA). + */ + bool is_tv; + + /* This is for current tv format name */ + int tv_format_index; + + /** + * This is set if we treat the device as HDMI, instead of DVI. + */ + bool is_hdmi; + bool has_hdmi_monitor; + bool has_hdmi_audio; + + /** + * This is set if we detect output of sdvo device as LVDS and + * have a valid fixed mode to use with the panel. + */ + bool is_lvds; + + /** + * This is sdvo fixed panel mode pointer + */ + struct drm_display_mode *sdvo_lvds_fixed_mode; + + /* DDC bus used by this SDVO encoder */ + uint8_t ddc_bus; + + u8 pixel_multiplier; + + /* Input timings for adjusted_mode */ + struct psb_intel_sdvo_dtd input_dtd; + + /* Saved SDVO output states */ + uint32_t saveSDVO; /* Can be SDVOB or SDVOC depending on sdvo_reg */ +}; + +struct psb_intel_sdvo_connector { + struct gma_connector base; + + /* Mark the type of connector */ + uint16_t output_flag; + + int force_audio; + + /* This contains all current supported TV format */ + u8 tv_format_supported[ARRAY_SIZE(tv_format_names)]; + int format_supported_num; + struct drm_property *tv_format; + + /* add the property for the SDVO-TV */ + struct drm_property *left; + struct drm_property *right; + struct drm_property *top; + struct drm_property *bottom; + struct drm_property *hpos; + struct drm_property *vpos; + struct drm_property *contrast; + struct drm_property *saturation; + struct drm_property *hue; + struct drm_property *sharpness; + struct drm_property *flicker_filter; + struct drm_property *flicker_filter_adaptive; + struct drm_property *flicker_filter_2d; + struct drm_property *tv_chroma_filter; + struct drm_property *tv_luma_filter; + struct drm_property *dot_crawl; + + /* add the property for the SDVO-TV/LVDS */ + struct drm_property *brightness; + + /* Add variable to record current setting for the above property */ + u32 left_margin, right_margin, top_margin, bottom_margin; + + /* this is to get the range of margin.*/ + u32 max_hscan, max_vscan; + u32 max_hpos, cur_hpos; + u32 max_vpos, cur_vpos; + u32 cur_brightness, max_brightness; + u32 cur_contrast, max_contrast; + u32 cur_saturation, max_saturation; + u32 cur_hue, max_hue; + u32 cur_sharpness, max_sharpness; + u32 cur_flicker_filter, max_flicker_filter; + u32 cur_flicker_filter_adaptive, max_flicker_filter_adaptive; + u32 cur_flicker_filter_2d, max_flicker_filter_2d; + u32 cur_tv_chroma_filter, max_tv_chroma_filter; + u32 cur_tv_luma_filter, max_tv_luma_filter; + u32 cur_dot_crawl, max_dot_crawl; +}; + +static struct psb_intel_sdvo *to_psb_intel_sdvo(struct drm_encoder *encoder) +{ + return container_of(encoder, struct psb_intel_sdvo, base.base); +} + +static struct psb_intel_sdvo *intel_attached_sdvo(struct drm_connector *connector) +{ + return container_of(gma_attached_encoder(connector), + struct psb_intel_sdvo, base); +} + +static struct psb_intel_sdvo_connector *to_psb_intel_sdvo_connector(struct drm_connector *connector) +{ + return container_of(to_gma_connector(connector), struct psb_intel_sdvo_connector, base); +} + +static bool +psb_intel_sdvo_output_setup(struct psb_intel_sdvo *psb_intel_sdvo, uint16_t flags); +static bool +psb_intel_sdvo_tv_create_property(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector, + int type); +static bool +psb_intel_sdvo_create_enhance_property(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector); + +/* + * Writes the SDVOB or SDVOC with the given value, but always writes both + * SDVOB and SDVOC to work around apparent hardware issues (according to + * comments in the BIOS). + */ +static void psb_intel_sdvo_write_sdvox(struct psb_intel_sdvo *psb_intel_sdvo, u32 val) +{ + struct drm_device *dev = psb_intel_sdvo->base.base.dev; + u32 bval = val, cval = val; + int i, j; + int need_aux = IS_MRST(dev) ? 1 : 0; + + for (j = 0; j <= need_aux; j++) { + if (psb_intel_sdvo->sdvo_reg == SDVOB) + cval = REG_READ_WITH_AUX(SDVOC, j); + else + bval = REG_READ_WITH_AUX(SDVOB, j); + + /* + * Write the registers twice for luck. Sometimes, + * writing them only once doesn't appear to 'stick'. + * The BIOS does this too. Yay, magic + */ + for (i = 0; i < 2; i++) { + REG_WRITE_WITH_AUX(SDVOB, bval, j); + REG_READ_WITH_AUX(SDVOB, j); + REG_WRITE_WITH_AUX(SDVOC, cval, j); + REG_READ_WITH_AUX(SDVOC, j); + } + } +} + +static bool psb_intel_sdvo_read_byte(struct psb_intel_sdvo *psb_intel_sdvo, u8 addr, u8 *ch) +{ + struct i2c_msg msgs[] = { + { + .addr = psb_intel_sdvo->slave_addr, + .flags = 0, + .len = 1, + .buf = &addr, + }, + { + .addr = psb_intel_sdvo->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = ch, + } + }; + int ret; + + if ((ret = i2c_transfer(psb_intel_sdvo->i2c, msgs, 2)) == 2) + return true; + + DRM_DEBUG_KMS("i2c transfer returned %d\n", ret); + return false; +} + +#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} +/** Mapping of command numbers to names, for debug output */ +static const struct _sdvo_cmd_name { + u8 cmd; + const char *name; +} sdvo_cmd_names[] = { + SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS), + + /* Add the op code for SDVO enhancements */ + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HPOS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HPOS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HPOS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_VPOS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_VPOS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_VPOS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_2D), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_2D), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_2D), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SHARPNESS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SHARPNESS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SHARPNESS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DOT_CRAWL), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DOT_CRAWL), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_CHROMA_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_CHROMA_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_CHROMA_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_LUMA_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_LUMA_FILTER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_LUMA_FILTER), + + /* HDMI op code */ + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA), +}; + +#define IS_SDVOB(reg) (reg == SDVOB) +#define SDVO_NAME(svdo) (IS_SDVOB((svdo)->sdvo_reg) ? "SDVOB" : "SDVOC") + +static void psb_intel_sdvo_debug_write(struct psb_intel_sdvo *psb_intel_sdvo, + u8 cmd, const void *args, int args_len) +{ + struct drm_device *dev = psb_intel_sdvo->base.base.dev; + int i, pos = 0; + char buffer[73]; + +#define BUF_PRINT(args...) \ + pos += snprintf(buffer + pos, max_t(int, sizeof(buffer) - pos, 0), args) + + for (i = 0; i < args_len; i++) { + BUF_PRINT("%02X ", ((u8 *)args)[i]); + } + + for (; i < 8; i++) { + BUF_PRINT(" "); + } + + for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) { + if (cmd == sdvo_cmd_names[i].cmd) { + BUF_PRINT("(%s)", sdvo_cmd_names[i].name); + break; + } + } + + if (i == ARRAY_SIZE(sdvo_cmd_names)) + BUF_PRINT("(%02X)", cmd); + + drm_WARN_ON(dev, pos >= sizeof(buffer) - 1); +#undef BUF_PRINT + + DRM_DEBUG_KMS("%s: W: %02X %s\n", SDVO_NAME(psb_intel_sdvo), cmd, buffer); +} + +static const char *cmd_status_names[] = { + "Power on", + "Success", + "Not supported", + "Invalid arg", + "Pending", + "Target not specified", + "Scaling not supported" +}; + +#define MAX_ARG_LEN 32 + +static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 cmd, + const void *args, int args_len) +{ + u8 buf[MAX_ARG_LEN*2 + 2], status; + struct i2c_msg msgs[MAX_ARG_LEN + 3]; + int i, ret; + + if (args_len > MAX_ARG_LEN) { + DRM_ERROR("Need to increase arg length\n"); + return false; + } + + psb_intel_sdvo_debug_write(psb_intel_sdvo, cmd, args, args_len); + + for (i = 0; i < args_len; i++) { + msgs[i].addr = psb_intel_sdvo->slave_addr; + msgs[i].flags = 0; + msgs[i].len = 2; + msgs[i].buf = buf + 2 *i; + buf[2*i + 0] = SDVO_I2C_ARG_0 - i; + buf[2*i + 1] = ((u8*)args)[i]; + } + msgs[i].addr = psb_intel_sdvo->slave_addr; + msgs[i].flags = 0; + msgs[i].len = 2; + msgs[i].buf = buf + 2*i; + buf[2*i + 0] = SDVO_I2C_OPCODE; + buf[2*i + 1] = cmd; + + /* the following two are to read the response */ + status = SDVO_I2C_CMD_STATUS; + msgs[i+1].addr = psb_intel_sdvo->slave_addr; + msgs[i+1].flags = 0; + msgs[i+1].len = 1; + msgs[i+1].buf = &status; + + msgs[i+2].addr = psb_intel_sdvo->slave_addr; + msgs[i+2].flags = I2C_M_RD; + msgs[i+2].len = 1; + msgs[i+2].buf = &status; + + ret = i2c_transfer(psb_intel_sdvo->i2c, msgs, i+3); + if (ret < 0) { + DRM_DEBUG_KMS("I2c transfer returned %d\n", ret); + return false; + } + if (ret != i+3) { + /* failure in I2C transfer */ + DRM_DEBUG_KMS("I2c transfer returned %d/%d\n", ret, i+3); + return false; + } + + return true; +} + +static bool psb_intel_sdvo_read_response(struct psb_intel_sdvo *psb_intel_sdvo, + void *response, int response_len) +{ + struct drm_device *dev = psb_intel_sdvo->base.base.dev; + char buffer[73]; + int i, pos = 0; + u8 retry = 5; + u8 status; + + /* + * The documentation states that all commands will be + * processed within 15µs, and that we need only poll + * the status byte a maximum of 3 times in order for the + * command to be complete. + * + * Check 5 times in case the hardware failed to read the docs. + */ + if (!psb_intel_sdvo_read_byte(psb_intel_sdvo, + SDVO_I2C_CMD_STATUS, + &status)) + goto log_fail; + + while ((status == SDVO_CMD_STATUS_PENDING || + status == SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED) && retry--) { + udelay(15); + if (!psb_intel_sdvo_read_byte(psb_intel_sdvo, + SDVO_I2C_CMD_STATUS, + &status)) + goto log_fail; + } + +#define BUF_PRINT(args...) \ + pos += snprintf(buffer + pos, max_t(int, sizeof(buffer) - pos, 0), args) + + if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) + BUF_PRINT("(%s)", cmd_status_names[status]); + else + BUF_PRINT("(??? %d)", status); + + if (status != SDVO_CMD_STATUS_SUCCESS) + goto log_fail; + + /* Read the command response */ + for (i = 0; i < response_len; i++) { + if (!psb_intel_sdvo_read_byte(psb_intel_sdvo, + SDVO_I2C_RETURN_0 + i, + &((u8 *)response)[i])) + goto log_fail; + BUF_PRINT(" %02X", ((u8 *)response)[i]); + } + + drm_WARN_ON(dev, pos >= sizeof(buffer) - 1); +#undef BUF_PRINT + + DRM_DEBUG_KMS("%s: R: %s\n", SDVO_NAME(psb_intel_sdvo), buffer); + return true; + +log_fail: + DRM_DEBUG_KMS("%s: R: ... failed %s\n", + SDVO_NAME(psb_intel_sdvo), buffer); + return false; +} + +static int psb_intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) +{ + if (mode->clock >= 100000) + return 1; + else if (mode->clock >= 50000) + return 2; + else + return 4; +} + +static bool psb_intel_sdvo_set_control_bus_switch(struct psb_intel_sdvo *psb_intel_sdvo, + u8 ddc_bus) +{ + /* This must be the immediately preceding write before the i2c xfer */ + return psb_intel_sdvo_write_cmd(psb_intel_sdvo, + SDVO_CMD_SET_CONTROL_BUS_SWITCH, + &ddc_bus, 1); +} + +static bool psb_intel_sdvo_set_value(struct psb_intel_sdvo *psb_intel_sdvo, u8 cmd, const void *data, int len) +{ + if (!psb_intel_sdvo_write_cmd(psb_intel_sdvo, cmd, data, len)) + return false; + + return psb_intel_sdvo_read_response(psb_intel_sdvo, NULL, 0); +} + +static bool +psb_intel_sdvo_get_value(struct psb_intel_sdvo *psb_intel_sdvo, u8 cmd, void *value, int len) +{ + if (!psb_intel_sdvo_write_cmd(psb_intel_sdvo, cmd, NULL, 0)) + return false; + + return psb_intel_sdvo_read_response(psb_intel_sdvo, value, len); +} + +static bool psb_intel_sdvo_set_target_input(struct psb_intel_sdvo *psb_intel_sdvo) +{ + struct psb_intel_sdvo_set_target_input_args targets = {0}; + return psb_intel_sdvo_set_value(psb_intel_sdvo, + SDVO_CMD_SET_TARGET_INPUT, + &targets, sizeof(targets)); +} + +/* + * Return whether each input is trained. + * + * This function is making an assumption about the layout of the response, + * which should be checked against the docs. + */ +static bool psb_intel_sdvo_get_trained_inputs(struct psb_intel_sdvo *psb_intel_sdvo, bool *input_1, bool *input_2) +{ + struct psb_intel_sdvo_get_trained_inputs_response response; + + BUILD_BUG_ON(sizeof(response) != 1); + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, SDVO_CMD_GET_TRAINED_INPUTS, + &response, sizeof(response))) + return false; + + *input_1 = response.input0_trained; + *input_2 = response.input1_trained; + return true; +} + +static bool psb_intel_sdvo_set_active_outputs(struct psb_intel_sdvo *psb_intel_sdvo, + u16 outputs) +{ + return psb_intel_sdvo_set_value(psb_intel_sdvo, + SDVO_CMD_SET_ACTIVE_OUTPUTS, + &outputs, sizeof(outputs)); +} + +static bool psb_intel_sdvo_set_encoder_power_state(struct psb_intel_sdvo *psb_intel_sdvo, + int mode) +{ + u8 state = SDVO_ENCODER_STATE_ON; + + switch (mode) { + case DRM_MODE_DPMS_ON: + state = SDVO_ENCODER_STATE_ON; + break; + case DRM_MODE_DPMS_STANDBY: + state = SDVO_ENCODER_STATE_STANDBY; + break; + case DRM_MODE_DPMS_SUSPEND: + state = SDVO_ENCODER_STATE_SUSPEND; + break; + case DRM_MODE_DPMS_OFF: + state = SDVO_ENCODER_STATE_OFF; + break; + } + + return psb_intel_sdvo_set_value(psb_intel_sdvo, + SDVO_CMD_SET_ENCODER_POWER_STATE, &state, sizeof(state)); +} + +static bool psb_intel_sdvo_get_input_pixel_clock_range(struct psb_intel_sdvo *psb_intel_sdvo, + int *clock_min, + int *clock_max) +{ + struct psb_intel_sdvo_pixel_clock_range clocks; + + BUILD_BUG_ON(sizeof(clocks) != 4); + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, + &clocks, sizeof(clocks))) + return false; + + /* Convert the values from units of 10 kHz to kHz. */ + *clock_min = clocks.min * 10; + *clock_max = clocks.max * 10; + return true; +} + +static bool psb_intel_sdvo_set_target_output(struct psb_intel_sdvo *psb_intel_sdvo, + u16 outputs) +{ + return psb_intel_sdvo_set_value(psb_intel_sdvo, + SDVO_CMD_SET_TARGET_OUTPUT, + &outputs, sizeof(outputs)); +} + +static bool psb_intel_sdvo_set_timing(struct psb_intel_sdvo *psb_intel_sdvo, u8 cmd, + struct psb_intel_sdvo_dtd *dtd) +{ + return psb_intel_sdvo_set_value(psb_intel_sdvo, cmd, &dtd->part1, sizeof(dtd->part1)) && + psb_intel_sdvo_set_value(psb_intel_sdvo, cmd + 1, &dtd->part2, sizeof(dtd->part2)); +} + +static bool psb_intel_sdvo_set_input_timing(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_dtd *dtd) +{ + return psb_intel_sdvo_set_timing(psb_intel_sdvo, + SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd); +} + +static bool psb_intel_sdvo_set_output_timing(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_dtd *dtd) +{ + return psb_intel_sdvo_set_timing(psb_intel_sdvo, + SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); +} + +static bool +psb_intel_sdvo_create_preferred_input_timing(struct psb_intel_sdvo *psb_intel_sdvo, + uint16_t clock, + uint16_t width, + uint16_t height) +{ + struct psb_intel_sdvo_preferred_input_timing_args args; + + memset(&args, 0, sizeof(args)); + args.clock = clock; + args.width = width; + args.height = height; + args.interlace = 0; + + if (psb_intel_sdvo->is_lvds && + (psb_intel_sdvo->sdvo_lvds_fixed_mode->hdisplay != width || + psb_intel_sdvo->sdvo_lvds_fixed_mode->vdisplay != height)) + args.scaled = 1; + + return psb_intel_sdvo_set_value(psb_intel_sdvo, + SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING, + &args, sizeof(args)); +} + +static bool psb_intel_sdvo_get_preferred_input_timing(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_dtd *dtd) +{ + BUILD_BUG_ON(sizeof(dtd->part1) != 8); + BUILD_BUG_ON(sizeof(dtd->part2) != 8); + return psb_intel_sdvo_get_value(psb_intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1, + &dtd->part1, sizeof(dtd->part1)) && + psb_intel_sdvo_get_value(psb_intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2, + &dtd->part2, sizeof(dtd->part2)); +} + +static bool psb_intel_sdvo_set_clock_rate_mult(struct psb_intel_sdvo *psb_intel_sdvo, u8 val) +{ + return psb_intel_sdvo_set_value(psb_intel_sdvo, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1); +} + +static void psb_intel_sdvo_get_dtd_from_mode(struct psb_intel_sdvo_dtd *dtd, + const struct drm_display_mode *mode) +{ + uint16_t width, height; + uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; + uint16_t h_sync_offset, v_sync_offset; + + width = mode->crtc_hdisplay; + height = mode->crtc_vdisplay; + + /* do some mode translations */ + h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; + h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; + + v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; + v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; + + h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; + v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; + + dtd->part1.clock = mode->clock / 10; + dtd->part1.h_active = width & 0xff; + dtd->part1.h_blank = h_blank_len & 0xff; + dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | + ((h_blank_len >> 8) & 0xf); + dtd->part1.v_active = height & 0xff; + dtd->part1.v_blank = v_blank_len & 0xff; + dtd->part1.v_high = (((height >> 8) & 0xf) << 4) | + ((v_blank_len >> 8) & 0xf); + + dtd->part2.h_sync_off = h_sync_offset & 0xff; + dtd->part2.h_sync_width = h_sync_len & 0xff; + dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | + (v_sync_len & 0xf); + dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | + ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | + ((v_sync_len & 0x30) >> 4); + + dtd->part2.dtd_flags = 0x18; + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + dtd->part2.dtd_flags |= 0x2; + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + dtd->part2.dtd_flags |= 0x4; + + dtd->part2.sdvo_flags = 0; + dtd->part2.v_sync_off_high = v_sync_offset & 0xc0; + dtd->part2.reserved = 0; +} + +static void psb_intel_sdvo_get_mode_from_dtd(struct drm_display_mode * mode, + const struct psb_intel_sdvo_dtd *dtd) +{ + mode->hdisplay = dtd->part1.h_active; + mode->hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8; + mode->hsync_start = mode->hdisplay + dtd->part2.h_sync_off; + mode->hsync_start += (dtd->part2.sync_off_width_high & 0xc0) << 2; + mode->hsync_end = mode->hsync_start + dtd->part2.h_sync_width; + mode->hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4; + mode->htotal = mode->hdisplay + dtd->part1.h_blank; + mode->htotal += (dtd->part1.h_high & 0xf) << 8; + + mode->vdisplay = dtd->part1.v_active; + mode->vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8; + mode->vsync_start = mode->vdisplay; + mode->vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf; + mode->vsync_start += (dtd->part2.sync_off_width_high & 0x0c) << 2; + mode->vsync_start += dtd->part2.v_sync_off_high & 0xc0; + mode->vsync_end = mode->vsync_start + + (dtd->part2.v_sync_off_width & 0xf); + mode->vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4; + mode->vtotal = mode->vdisplay + dtd->part1.v_blank; + mode->vtotal += (dtd->part1.v_high & 0xf) << 8; + + mode->clock = dtd->part1.clock * 10; + + mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC); + if (dtd->part2.dtd_flags & 0x2) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + if (dtd->part2.dtd_flags & 0x4) + mode->flags |= DRM_MODE_FLAG_PVSYNC; +} + +static bool psb_intel_sdvo_check_supp_encode(struct psb_intel_sdvo *psb_intel_sdvo) +{ + struct psb_intel_sdvo_encode encode; + + BUILD_BUG_ON(sizeof(encode) != 2); + return psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_SUPP_ENCODE, + &encode, sizeof(encode)); +} + +static bool psb_intel_sdvo_set_encode(struct psb_intel_sdvo *psb_intel_sdvo, + uint8_t mode) +{ + return psb_intel_sdvo_set_value(psb_intel_sdvo, SDVO_CMD_SET_ENCODE, &mode, 1); +} + +static bool psb_intel_sdvo_set_colorimetry(struct psb_intel_sdvo *psb_intel_sdvo, + uint8_t mode) +{ + return psb_intel_sdvo_set_value(psb_intel_sdvo, SDVO_CMD_SET_COLORIMETRY, &mode, 1); +} + +#if 0 +static void psb_intel_sdvo_dump_hdmi_buf(struct psb_intel_sdvo *psb_intel_sdvo) +{ + int i, j; + uint8_t set_buf_index[2]; + uint8_t av_split; + uint8_t buf_size; + uint8_t buf[48]; + uint8_t *pos; + + psb_intel_sdvo_get_value(encoder, SDVO_CMD_GET_HBUF_AV_SPLIT, &av_split, 1); + + for (i = 0; i <= av_split; i++) { + set_buf_index[0] = i; set_buf_index[1] = 0; + psb_intel_sdvo_write_cmd(encoder, SDVO_CMD_SET_HBUF_INDEX, + set_buf_index, 2); + psb_intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_INFO, NULL, 0); + psb_intel_sdvo_read_response(encoder, &buf_size, 1); + + pos = buf; + for (j = 0; j <= buf_size; j += 8) { + psb_intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_DATA, + NULL, 0); + psb_intel_sdvo_read_response(encoder, pos, 8); + pos += 8; + } + } +} +#endif + +static bool psb_intel_sdvo_set_avi_infoframe(struct psb_intel_sdvo *psb_intel_sdvo) +{ + DRM_INFO("HDMI is not supported yet"); + + return false; +} + +static bool psb_intel_sdvo_set_tv_format(struct psb_intel_sdvo *psb_intel_sdvo) +{ + struct psb_intel_sdvo_tv_format format; + uint32_t format_map; + + format_map = 1 << psb_intel_sdvo->tv_format_index; + memset(&format, 0, sizeof(format)); + memcpy(&format, &format_map, min(sizeof(format), sizeof(format_map))); + + BUILD_BUG_ON(sizeof(format) != 6); + return psb_intel_sdvo_set_value(psb_intel_sdvo, + SDVO_CMD_SET_TV_FORMAT, + &format, sizeof(format)); +} + +static bool +psb_intel_sdvo_set_output_timings_from_mode(struct psb_intel_sdvo *psb_intel_sdvo, + const struct drm_display_mode *mode) +{ + struct psb_intel_sdvo_dtd output_dtd; + + if (!psb_intel_sdvo_set_target_output(psb_intel_sdvo, + psb_intel_sdvo->attached_output)) + return false; + + psb_intel_sdvo_get_dtd_from_mode(&output_dtd, mode); + if (!psb_intel_sdvo_set_output_timing(psb_intel_sdvo, &output_dtd)) + return false; + + return true; +} + +static bool +psb_intel_sdvo_set_input_timings_for_mode(struct psb_intel_sdvo *psb_intel_sdvo, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* Reset the input timing to the screen. Assume always input 0. */ + if (!psb_intel_sdvo_set_target_input(psb_intel_sdvo)) + return false; + + if (!psb_intel_sdvo_create_preferred_input_timing(psb_intel_sdvo, + mode->clock / 10, + mode->hdisplay, + mode->vdisplay)) + return false; + + if (!psb_intel_sdvo_get_preferred_input_timing(psb_intel_sdvo, + &psb_intel_sdvo->input_dtd)) + return false; + + psb_intel_sdvo_get_mode_from_dtd(adjusted_mode, &psb_intel_sdvo->input_dtd); + + drm_mode_set_crtcinfo(adjusted_mode, 0); + return true; +} + +static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(encoder); + + /* We need to construct preferred input timings based on our + * output timings. To do that, we have to set the output + * timings, even though this isn't really the right place in + * the sequence to do it. Oh well. + */ + if (psb_intel_sdvo->is_tv) { + if (!psb_intel_sdvo_set_output_timings_from_mode(psb_intel_sdvo, mode)) + return false; + + (void) psb_intel_sdvo_set_input_timings_for_mode(psb_intel_sdvo, + mode, + adjusted_mode); + } else if (psb_intel_sdvo->is_lvds) { + if (!psb_intel_sdvo_set_output_timings_from_mode(psb_intel_sdvo, + psb_intel_sdvo->sdvo_lvds_fixed_mode)) + return false; + + (void) psb_intel_sdvo_set_input_timings_for_mode(psb_intel_sdvo, + mode, + adjusted_mode); + } + + /* Make the CRTC code factor in the SDVO pixel multiplier. The + * SDVO device will factor out the multiplier during mode_set. + */ + psb_intel_sdvo->pixel_multiplier = + psb_intel_sdvo_get_pixel_multiplier(adjusted_mode); + adjusted_mode->clock *= psb_intel_sdvo->pixel_multiplier; + + return true; +} + +static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_crtc *crtc = encoder->crtc; + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(encoder); + u32 sdvox; + struct psb_intel_sdvo_in_out_map in_out; + struct psb_intel_sdvo_dtd input_dtd; + int rate; + int need_aux = IS_MRST(dev) ? 1 : 0; + + if (!mode) + return; + + /* First, set the input mapping for the first input to our controlled + * output. This is only correct if we're a single-input device, in + * which case the first input is the output from the appropriate SDVO + * channel on the motherboard. In a two-input device, the first input + * will be SDVOB and the second SDVOC. + */ + in_out.in0 = psb_intel_sdvo->attached_output; + in_out.in1 = 0; + + psb_intel_sdvo_set_value(psb_intel_sdvo, + SDVO_CMD_SET_IN_OUT_MAP, + &in_out, sizeof(in_out)); + + /* Set the output timings to the screen */ + if (!psb_intel_sdvo_set_target_output(psb_intel_sdvo, + psb_intel_sdvo->attached_output)) + return; + + /* We have tried to get input timing in mode_fixup, and filled into + * adjusted_mode. + */ + if (psb_intel_sdvo->is_tv || psb_intel_sdvo->is_lvds) { + input_dtd = psb_intel_sdvo->input_dtd; + } else { + /* Set the output timing to the screen */ + if (!psb_intel_sdvo_set_target_output(psb_intel_sdvo, + psb_intel_sdvo->attached_output)) + return; + + psb_intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + (void) psb_intel_sdvo_set_output_timing(psb_intel_sdvo, &input_dtd); + } + + /* Set the input timing to the screen. Assume always input 0. */ + if (!psb_intel_sdvo_set_target_input(psb_intel_sdvo)) + return; + + if (psb_intel_sdvo->has_hdmi_monitor) { + psb_intel_sdvo_set_encode(psb_intel_sdvo, SDVO_ENCODE_HDMI); + psb_intel_sdvo_set_colorimetry(psb_intel_sdvo, + SDVO_COLORIMETRY_RGB256); + psb_intel_sdvo_set_avi_infoframe(psb_intel_sdvo); + } else + psb_intel_sdvo_set_encode(psb_intel_sdvo, SDVO_ENCODE_DVI); + + if (psb_intel_sdvo->is_tv && + !psb_intel_sdvo_set_tv_format(psb_intel_sdvo)) + return; + + (void) psb_intel_sdvo_set_input_timing(psb_intel_sdvo, &input_dtd); + + switch (psb_intel_sdvo->pixel_multiplier) { + default: + case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break; + case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break; + case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break; + } + if (!psb_intel_sdvo_set_clock_rate_mult(psb_intel_sdvo, rate)) + return; + + /* Set the SDVO control regs. */ + if (need_aux) + sdvox = REG_READ_AUX(psb_intel_sdvo->sdvo_reg); + else + sdvox = REG_READ(psb_intel_sdvo->sdvo_reg); + + switch (psb_intel_sdvo->sdvo_reg) { + case SDVOB: + sdvox &= SDVOB_PRESERVE_MASK; + break; + case SDVOC: + sdvox &= SDVOC_PRESERVE_MASK; + break; + } + sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; + + if (gma_crtc->pipe == 1) + sdvox |= SDVO_PIPE_B_SELECT; + if (psb_intel_sdvo->has_hdmi_audio) + sdvox |= SDVO_AUDIO_ENABLE; + + /* FIXME: Check if this is needed for PSB + sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT; + */ + + if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL) + sdvox |= SDVO_STALL_SELECT; + psb_intel_sdvo_write_sdvox(psb_intel_sdvo, sdvox); +} + +static void psb_intel_sdvo_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(encoder); + u32 temp; + int i; + int need_aux = IS_MRST(dev) ? 1 : 0; + + switch (mode) { + case DRM_MODE_DPMS_ON: + DRM_DEBUG("DPMS_ON"); + break; + case DRM_MODE_DPMS_OFF: + DRM_DEBUG("DPMS_OFF"); + break; + default: + DRM_DEBUG("DPMS: %d", mode); + } + + if (mode != DRM_MODE_DPMS_ON) { + psb_intel_sdvo_set_active_outputs(psb_intel_sdvo, 0); + if (0) + psb_intel_sdvo_set_encoder_power_state(psb_intel_sdvo, mode); + + if (mode == DRM_MODE_DPMS_OFF) { + if (need_aux) + temp = REG_READ_AUX(psb_intel_sdvo->sdvo_reg); + else + temp = REG_READ(psb_intel_sdvo->sdvo_reg); + + if ((temp & SDVO_ENABLE) != 0) { + psb_intel_sdvo_write_sdvox(psb_intel_sdvo, temp & ~SDVO_ENABLE); + } + } + } else { + bool input1, input2; + u8 status; + + if (need_aux) + temp = REG_READ_AUX(psb_intel_sdvo->sdvo_reg); + else + temp = REG_READ(psb_intel_sdvo->sdvo_reg); + + if ((temp & SDVO_ENABLE) == 0) + psb_intel_sdvo_write_sdvox(psb_intel_sdvo, temp | SDVO_ENABLE); + + for (i = 0; i < 2; i++) + gma_wait_for_vblank(dev); + + status = psb_intel_sdvo_get_trained_inputs(psb_intel_sdvo, &input1, &input2); + /* Warn if the device reported failure to sync. + * A lot of SDVO devices fail to notify of sync, but it's + * a given it the status is a success, we succeeded. + */ + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { + DRM_DEBUG_KMS("First %s output reported failure to " + "sync\n", SDVO_NAME(psb_intel_sdvo)); + } + + if (0) + psb_intel_sdvo_set_encoder_power_state(psb_intel_sdvo, mode); + psb_intel_sdvo_set_active_outputs(psb_intel_sdvo, psb_intel_sdvo->attached_output); + } + return; +} + +static enum drm_mode_status psb_intel_sdvo_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector); + + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (psb_intel_sdvo->pixel_clock_min > mode->clock) + return MODE_CLOCK_LOW; + + if (psb_intel_sdvo->pixel_clock_max < mode->clock) + return MODE_CLOCK_HIGH; + + if (psb_intel_sdvo->is_lvds) { + if (mode->hdisplay > psb_intel_sdvo->sdvo_lvds_fixed_mode->hdisplay) + return MODE_PANEL; + + if (mode->vdisplay > psb_intel_sdvo->sdvo_lvds_fixed_mode->vdisplay) + return MODE_PANEL; + } + + return MODE_OK; +} + +static bool psb_intel_sdvo_get_capabilities(struct psb_intel_sdvo *psb_intel_sdvo, struct psb_intel_sdvo_caps *caps) +{ + BUILD_BUG_ON(sizeof(*caps) != 8); + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_DEVICE_CAPS, + caps, sizeof(*caps))) + return false; + + DRM_DEBUG_KMS("SDVO capabilities:\n" + " vendor_id: %d\n" + " device_id: %d\n" + " device_rev_id: %d\n" + " sdvo_version_major: %d\n" + " sdvo_version_minor: %d\n" + " sdvo_inputs_mask: %d\n" + " smooth_scaling: %d\n" + " sharp_scaling: %d\n" + " up_scaling: %d\n" + " down_scaling: %d\n" + " stall_support: %d\n" + " output_flags: %d\n", + caps->vendor_id, + caps->device_id, + caps->device_rev_id, + caps->sdvo_version_major, + caps->sdvo_version_minor, + caps->sdvo_inputs_mask, + caps->smooth_scaling, + caps->sharp_scaling, + caps->up_scaling, + caps->down_scaling, + caps->stall_support, + caps->output_flags); + + return true; +} + +static bool +psb_intel_sdvo_multifunc_encoder(struct psb_intel_sdvo *psb_intel_sdvo) +{ + /* Is there more than one type of output? */ + int caps = psb_intel_sdvo->caps.output_flags & 0xf; + return caps & -caps; +} + +static struct edid * +psb_intel_sdvo_get_edid(struct drm_connector *connector) +{ + struct psb_intel_sdvo *sdvo = intel_attached_sdvo(connector); + return drm_get_edid(connector, &sdvo->ddc); +} + +/* Mac mini hack -- use the same DDC as the analog connector */ +static struct edid * +psb_intel_sdvo_get_analog_edid(struct drm_connector *connector) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); + + return drm_get_edid(connector, + &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); +} + +static enum drm_connector_status +psb_intel_sdvo_hdmi_sink_detect(struct drm_connector *connector) +{ + struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector); + enum drm_connector_status status; + struct edid *edid; + + edid = psb_intel_sdvo_get_edid(connector); + + if (edid == NULL && psb_intel_sdvo_multifunc_encoder(psb_intel_sdvo)) { + u8 ddc, saved_ddc = psb_intel_sdvo->ddc_bus; + + /* + * Don't use the 1 as the argument of DDC bus switch to get + * the EDID. It is used for SDVO SPD ROM. + */ + for (ddc = psb_intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) { + psb_intel_sdvo->ddc_bus = ddc; + edid = psb_intel_sdvo_get_edid(connector); + if (edid) + break; + } + /* + * If we found the EDID on the other bus, + * assume that is the correct DDC bus. + */ + if (edid == NULL) + psb_intel_sdvo->ddc_bus = saved_ddc; + } + + /* + * When there is no edid and no monitor is connected with VGA + * port, try to use the CRT ddc to read the EDID for DVI-connector. + */ + if (edid == NULL) + edid = psb_intel_sdvo_get_analog_edid(connector); + + status = connector_status_unknown; + if (edid != NULL) { + /* DDC bus is shared, match EDID to connector type */ + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + status = connector_status_connected; + if (psb_intel_sdvo->is_hdmi) { + psb_intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid); + psb_intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid); + } + } else + status = connector_status_disconnected; + kfree(edid); + } + + if (status == connector_status_connected) { + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector = to_psb_intel_sdvo_connector(connector); + if (psb_intel_sdvo_connector->force_audio) + psb_intel_sdvo->has_hdmi_audio = psb_intel_sdvo_connector->force_audio > 0; + } + + return status; +} + +static enum drm_connector_status +psb_intel_sdvo_detect(struct drm_connector *connector, bool force) +{ + uint16_t response; + struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector); + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector = to_psb_intel_sdvo_connector(connector); + enum drm_connector_status ret; + + if (!psb_intel_sdvo_write_cmd(psb_intel_sdvo, + SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0)) + return connector_status_unknown; + + /* add 30ms delay when the output type might be TV */ + if (psb_intel_sdvo->caps.output_flags & + (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0)) + mdelay(30); + + if (!psb_intel_sdvo_read_response(psb_intel_sdvo, &response, 2)) + return connector_status_unknown; + + DRM_DEBUG_KMS("SDVO response %d %d [%x]\n", + response & 0xff, response >> 8, + psb_intel_sdvo_connector->output_flag); + + if (response == 0) + return connector_status_disconnected; + + psb_intel_sdvo->attached_output = response; + + psb_intel_sdvo->has_hdmi_monitor = false; + psb_intel_sdvo->has_hdmi_audio = false; + + if ((psb_intel_sdvo_connector->output_flag & response) == 0) + ret = connector_status_disconnected; + else if (IS_TMDS(psb_intel_sdvo_connector)) + ret = psb_intel_sdvo_hdmi_sink_detect(connector); + else { + struct edid *edid; + + /* if we have an edid check it matches the connection */ + edid = psb_intel_sdvo_get_edid(connector); + if (edid == NULL) + edid = psb_intel_sdvo_get_analog_edid(connector); + if (edid != NULL) { + if (edid->input & DRM_EDID_INPUT_DIGITAL) + ret = connector_status_disconnected; + else + ret = connector_status_connected; + kfree(edid); + } else + ret = connector_status_connected; + } + + /* May update encoder flag for like clock for SDVO TV, etc.*/ + if (ret == connector_status_connected) { + psb_intel_sdvo->is_tv = false; + psb_intel_sdvo->is_lvds = false; + psb_intel_sdvo->base.needs_tv_clock = false; + + if (response & SDVO_TV_MASK) { + psb_intel_sdvo->is_tv = true; + psb_intel_sdvo->base.needs_tv_clock = true; + } + if (response & SDVO_LVDS_MASK) + psb_intel_sdvo->is_lvds = psb_intel_sdvo->sdvo_lvds_fixed_mode != NULL; + } + + return ret; +} + +static void psb_intel_sdvo_get_ddc_modes(struct drm_connector *connector) +{ + struct edid *edid; + + /* set the bus switch and get the modes */ + edid = psb_intel_sdvo_get_edid(connector); + + /* + * Mac mini hack. On this device, the DVI-I connector shares one DDC + * link between analog and digital outputs. So, if the regular SDVO + * DDC fails, check to see if the analog output is disconnected, in + * which case we'll look there for the digital DDC data. + */ + if (edid == NULL) + edid = psb_intel_sdvo_get_analog_edid(connector); + + if (edid != NULL) { + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector = to_psb_intel_sdvo_connector(connector); + bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL); + bool connector_is_digital = !!IS_TMDS(psb_intel_sdvo_connector); + + if (connector_is_digital == monitor_is_digital) { + drm_connector_update_edid_property(connector, edid); + drm_add_edid_modes(connector, edid); + } + + kfree(edid); + } +} + +/* + * Set of SDVO TV modes. + * Note! This is in reply order (see loop in get_tv_modes). + * XXX: all 60Hz refresh? + */ +static const struct drm_display_mode sdvo_tv_modes[] = { + { DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815, 320, 321, 384, + 416, 0, 200, 201, 232, 233, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814, 320, 321, 384, + 416, 0, 240, 241, 272, 273, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910, 400, 401, 464, + 496, 0, 300, 301, 332, 333, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913, 640, 641, 704, + 736, 0, 350, 351, 382, 383, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121, 640, 641, 704, + 736, 0, 400, 401, 432, 433, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 22654, 640, 641, 704, + 736, 0, 480, 481, 512, 513, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624, 704, 705, 768, + 800, 0, 480, 481, 512, 513, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232, 704, 705, 768, + 800, 0, 576, 577, 608, 609, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751, 720, 721, 784, + 816, 0, 350, 351, 382, 383, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199, 720, 721, 784, + 816, 0, 400, 401, 432, 433, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116, 720, 721, 784, + 816, 0, 480, 481, 512, 513, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054, 720, 721, 784, + 816, 0, 540, 541, 572, 573, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816, 720, 721, 784, + 816, 0, 576, 577, 608, 609, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570, 768, 769, 832, + 864, 0, 576, 577, 608, 609, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030, 800, 801, 864, + 896, 0, 600, 601, 632, 633, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581, 832, 833, 896, + 928, 0, 624, 625, 656, 657, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707, 920, 921, 984, + 1016, 0, 766, 767, 798, 799, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827, 1024, 1025, 1088, + 1120, 0, 768, 769, 800, 801, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, + { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265, 1280, 1281, 1344, + 1376, 0, 1024, 1025, 1056, 1057, 0, + DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, +}; + +static void psb_intel_sdvo_get_tv_modes(struct drm_connector *connector) +{ + struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector); + struct psb_intel_sdvo_sdtv_resolution_request tv_res; + uint32_t reply = 0, format_map = 0; + int i; + + /* Read the list of supported input resolutions for the selected TV + * format. + */ + format_map = 1 << psb_intel_sdvo->tv_format_index; + memcpy(&tv_res, &format_map, + min(sizeof(format_map), sizeof(struct psb_intel_sdvo_sdtv_resolution_request))); + + if (!psb_intel_sdvo_set_target_output(psb_intel_sdvo, psb_intel_sdvo->attached_output)) + return; + + BUILD_BUG_ON(sizeof(tv_res) != 3); + if (!psb_intel_sdvo_write_cmd(psb_intel_sdvo, + SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT, + &tv_res, sizeof(tv_res))) + return; + if (!psb_intel_sdvo_read_response(psb_intel_sdvo, &reply, 3)) + return; + + for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++) + if (reply & (1 << i)) { + struct drm_display_mode *nmode; + nmode = drm_mode_duplicate(connector->dev, + &sdvo_tv_modes[i]); + if (nmode) + drm_mode_probed_add(connector, nmode); + } +} + +static void psb_intel_sdvo_get_lvds_modes(struct drm_connector *connector) +{ + struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector); + struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); + struct drm_display_mode *newmode; + + /* + * Attempt to get the mode list from DDC. + * Assume that the preferred modes are + * arranged in priority order. + */ + psb_intel_ddc_get_modes(connector, psb_intel_sdvo->i2c); + if (list_empty(&connector->probed_modes) == false) + goto end; + + /* Fetch modes from VBT */ + if (dev_priv->sdvo_lvds_vbt_mode != NULL) { + newmode = drm_mode_duplicate(connector->dev, + dev_priv->sdvo_lvds_vbt_mode); + if (newmode != NULL) { + /* Guarantee the mode is preferred */ + newmode->type = (DRM_MODE_TYPE_PREFERRED | + DRM_MODE_TYPE_DRIVER); + drm_mode_probed_add(connector, newmode); + } + } + +end: + list_for_each_entry(newmode, &connector->probed_modes, head) { + if (newmode->type & DRM_MODE_TYPE_PREFERRED) { + psb_intel_sdvo->sdvo_lvds_fixed_mode = + drm_mode_duplicate(connector->dev, newmode); + + drm_mode_set_crtcinfo(psb_intel_sdvo->sdvo_lvds_fixed_mode, + 0); + + psb_intel_sdvo->is_lvds = true; + break; + } + } + +} + +static int psb_intel_sdvo_get_modes(struct drm_connector *connector) +{ + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector = to_psb_intel_sdvo_connector(connector); + + if (IS_TV(psb_intel_sdvo_connector)) + psb_intel_sdvo_get_tv_modes(connector); + else if (IS_LVDS(psb_intel_sdvo_connector)) + psb_intel_sdvo_get_lvds_modes(connector); + else + psb_intel_sdvo_get_ddc_modes(connector); + + return !list_empty(&connector->probed_modes); +} + +static void psb_intel_sdvo_destroy(struct drm_connector *connector) +{ + struct gma_connector *gma_connector = to_gma_connector(connector); + + drm_connector_cleanup(connector); + kfree(gma_connector); +} + +static bool psb_intel_sdvo_detect_hdmi_audio(struct drm_connector *connector) +{ + struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector); + struct edid *edid; + bool has_audio = false; + + if (!psb_intel_sdvo->is_hdmi) + return false; + + edid = psb_intel_sdvo_get_edid(connector); + if (edid != NULL && edid->input & DRM_EDID_INPUT_DIGITAL) + has_audio = drm_detect_monitor_audio(edid); + + return has_audio; +} + +static int +psb_intel_sdvo_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t val) +{ + struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector); + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector = to_psb_intel_sdvo_connector(connector); + struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); + uint16_t temp_value; + uint8_t cmd; + int ret; + + ret = drm_object_property_set_value(&connector->base, property, val); + if (ret) + return ret; + + if (property == dev_priv->force_audio_property) { + int i = val; + bool has_audio; + + if (i == psb_intel_sdvo_connector->force_audio) + return 0; + + psb_intel_sdvo_connector->force_audio = i; + + if (i == 0) + has_audio = psb_intel_sdvo_detect_hdmi_audio(connector); + else + has_audio = i > 0; + + if (has_audio == psb_intel_sdvo->has_hdmi_audio) + return 0; + + psb_intel_sdvo->has_hdmi_audio = has_audio; + goto done; + } + + if (property == dev_priv->broadcast_rgb_property) { + if (val == !!psb_intel_sdvo->color_range) + return 0; + + psb_intel_sdvo->color_range = val ? SDVO_COLOR_RANGE_16_235 : 0; + goto done; + } + +#define CHECK_PROPERTY(name, NAME) \ + if (psb_intel_sdvo_connector->name == property) { \ + if (psb_intel_sdvo_connector->cur_##name == temp_value) return 0; \ + if (psb_intel_sdvo_connector->max_##name < temp_value) return -EINVAL; \ + cmd = SDVO_CMD_SET_##NAME; \ + psb_intel_sdvo_connector->cur_##name = temp_value; \ + goto set_value; \ + } + + if (property == psb_intel_sdvo_connector->tv_format) { + if (val >= ARRAY_SIZE(tv_format_names)) + return -EINVAL; + + if (psb_intel_sdvo->tv_format_index == + psb_intel_sdvo_connector->tv_format_supported[val]) + return 0; + + psb_intel_sdvo->tv_format_index = psb_intel_sdvo_connector->tv_format_supported[val]; + goto done; + } else if (IS_TV_OR_LVDS(psb_intel_sdvo_connector)) { + temp_value = val; + if (psb_intel_sdvo_connector->left == property) { + drm_object_property_set_value(&connector->base, + psb_intel_sdvo_connector->right, val); + if (psb_intel_sdvo_connector->left_margin == temp_value) + return 0; + + psb_intel_sdvo_connector->left_margin = temp_value; + psb_intel_sdvo_connector->right_margin = temp_value; + temp_value = psb_intel_sdvo_connector->max_hscan - + psb_intel_sdvo_connector->left_margin; + cmd = SDVO_CMD_SET_OVERSCAN_H; + goto set_value; + } else if (psb_intel_sdvo_connector->right == property) { + drm_object_property_set_value(&connector->base, + psb_intel_sdvo_connector->left, val); + if (psb_intel_sdvo_connector->right_margin == temp_value) + return 0; + + psb_intel_sdvo_connector->left_margin = temp_value; + psb_intel_sdvo_connector->right_margin = temp_value; + temp_value = psb_intel_sdvo_connector->max_hscan - + psb_intel_sdvo_connector->left_margin; + cmd = SDVO_CMD_SET_OVERSCAN_H; + goto set_value; + } else if (psb_intel_sdvo_connector->top == property) { + drm_object_property_set_value(&connector->base, + psb_intel_sdvo_connector->bottom, val); + if (psb_intel_sdvo_connector->top_margin == temp_value) + return 0; + + psb_intel_sdvo_connector->top_margin = temp_value; + psb_intel_sdvo_connector->bottom_margin = temp_value; + temp_value = psb_intel_sdvo_connector->max_vscan - + psb_intel_sdvo_connector->top_margin; + cmd = SDVO_CMD_SET_OVERSCAN_V; + goto set_value; + } else if (psb_intel_sdvo_connector->bottom == property) { + drm_object_property_set_value(&connector->base, + psb_intel_sdvo_connector->top, val); + if (psb_intel_sdvo_connector->bottom_margin == temp_value) + return 0; + + psb_intel_sdvo_connector->top_margin = temp_value; + psb_intel_sdvo_connector->bottom_margin = temp_value; + temp_value = psb_intel_sdvo_connector->max_vscan - + psb_intel_sdvo_connector->top_margin; + cmd = SDVO_CMD_SET_OVERSCAN_V; + goto set_value; + } + CHECK_PROPERTY(hpos, HPOS) + CHECK_PROPERTY(vpos, VPOS) + CHECK_PROPERTY(saturation, SATURATION) + CHECK_PROPERTY(contrast, CONTRAST) + CHECK_PROPERTY(hue, HUE) + CHECK_PROPERTY(brightness, BRIGHTNESS) + CHECK_PROPERTY(sharpness, SHARPNESS) + CHECK_PROPERTY(flicker_filter, FLICKER_FILTER) + CHECK_PROPERTY(flicker_filter_2d, FLICKER_FILTER_2D) + CHECK_PROPERTY(flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE) + CHECK_PROPERTY(tv_chroma_filter, TV_CHROMA_FILTER) + CHECK_PROPERTY(tv_luma_filter, TV_LUMA_FILTER) + CHECK_PROPERTY(dot_crawl, DOT_CRAWL) + } + + return -EINVAL; /* unknown property */ + +set_value: + if (!psb_intel_sdvo_set_value(psb_intel_sdvo, cmd, &temp_value, 2)) + return -EIO; + + +done: + if (psb_intel_sdvo->base.base.crtc) { + struct drm_crtc *crtc = psb_intel_sdvo->base.base.crtc; + drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x, + crtc->y, crtc->primary->fb); + } + + return 0; +#undef CHECK_PROPERTY +} + +static void psb_intel_sdvo_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct gma_encoder *gma_encoder = gma_attached_encoder(connector); + struct psb_intel_sdvo *sdvo = to_psb_intel_sdvo(&gma_encoder->base); + + sdvo->saveSDVO = REG_READ(sdvo->sdvo_reg); +} + +static void psb_intel_sdvo_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_encoder *encoder = &gma_attached_encoder(connector)->base; + struct psb_intel_sdvo *sdvo = to_psb_intel_sdvo(encoder); + struct drm_crtc *crtc = encoder->crtc; + + REG_WRITE(sdvo->sdvo_reg, sdvo->saveSDVO); + + /* Force a full mode set on the crtc. We're supposed to have the + mode_config lock already. */ + if (connector->status == connector_status_connected) + drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, + NULL); +} + +static const struct drm_encoder_helper_funcs psb_intel_sdvo_helper_funcs = { + .dpms = psb_intel_sdvo_dpms, + .mode_fixup = psb_intel_sdvo_mode_fixup, + .prepare = gma_encoder_prepare, + .mode_set = psb_intel_sdvo_mode_set, + .commit = gma_encoder_commit, +}; + +static const struct drm_connector_funcs psb_intel_sdvo_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = psb_intel_sdvo_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = psb_intel_sdvo_set_property, + .destroy = psb_intel_sdvo_destroy, +}; + +static const struct drm_connector_helper_funcs psb_intel_sdvo_connector_helper_funcs = { + .get_modes = psb_intel_sdvo_get_modes, + .mode_valid = psb_intel_sdvo_mode_valid, + .best_encoder = gma_best_encoder, +}; + +static void psb_intel_sdvo_enc_destroy(struct drm_encoder *encoder) +{ + struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(encoder); + + if (psb_intel_sdvo->sdvo_lvds_fixed_mode != NULL) + drm_mode_destroy(encoder->dev, + psb_intel_sdvo->sdvo_lvds_fixed_mode); + + i2c_del_adapter(&psb_intel_sdvo->ddc); + gma_encoder_destroy(encoder); +} + +static const struct drm_encoder_funcs psb_intel_sdvo_enc_funcs = { + .destroy = psb_intel_sdvo_enc_destroy, +}; + +static void +psb_intel_sdvo_guess_ddc_bus(struct psb_intel_sdvo *sdvo) +{ + /* FIXME: At the moment, ddc_bus = 2 is the only thing that works. + * We need to figure out if this is true for all available poulsbo + * hardware, or if we need to fiddle with the guessing code above. + * The problem might go away if we can parse sdvo mappings from bios */ + sdvo->ddc_bus = 2; + +#if 0 + uint16_t mask = 0; + unsigned int num_bits; + + /* Make a mask of outputs less than or equal to our own priority in the + * list. + */ + switch (sdvo->controlled_output) { + case SDVO_OUTPUT_LVDS1: + mask |= SDVO_OUTPUT_LVDS1; + case SDVO_OUTPUT_LVDS0: + mask |= SDVO_OUTPUT_LVDS0; + case SDVO_OUTPUT_TMDS1: + mask |= SDVO_OUTPUT_TMDS1; + case SDVO_OUTPUT_TMDS0: + mask |= SDVO_OUTPUT_TMDS0; + case SDVO_OUTPUT_RGB1: + mask |= SDVO_OUTPUT_RGB1; + case SDVO_OUTPUT_RGB0: + mask |= SDVO_OUTPUT_RGB0; + break; + } + + /* Count bits to find what number we are in the priority list. */ + mask &= sdvo->caps.output_flags; + num_bits = hweight16(mask); + /* If more than 3 outputs, default to DDC bus 3 for now. */ + if (num_bits > 3) + num_bits = 3; + + /* Corresponds to SDVO_CONTROL_BUS_DDCx */ + sdvo->ddc_bus = 1 << num_bits; +#endif +} + +/* + * Choose the appropriate DDC bus for control bus switch command for this + * SDVO output based on the controlled output. + * + * DDC bus number assignment is in a priority order of RGB outputs, then TMDS + * outputs, then LVDS outputs. + */ +static void +psb_intel_sdvo_select_ddc_bus(struct drm_psb_private *dev_priv, + struct psb_intel_sdvo *sdvo, u32 reg) +{ + struct sdvo_device_mapping *mapping; + + if (IS_SDVOB(reg)) + mapping = &(dev_priv->sdvo_mappings[0]); + else + mapping = &(dev_priv->sdvo_mappings[1]); + + if (mapping->initialized) + sdvo->ddc_bus = 1 << ((mapping->ddc_pin & 0xf0) >> 4); + else + psb_intel_sdvo_guess_ddc_bus(sdvo); +} + +static void +psb_intel_sdvo_select_i2c_bus(struct drm_psb_private *dev_priv, + struct psb_intel_sdvo *sdvo, u32 reg) +{ + struct sdvo_device_mapping *mapping; + u8 pin, speed; + + if (IS_SDVOB(reg)) + mapping = &dev_priv->sdvo_mappings[0]; + else + mapping = &dev_priv->sdvo_mappings[1]; + + pin = GMBUS_PORT_DPB; + speed = GMBUS_RATE_1MHZ >> 8; + if (mapping->initialized) { + pin = mapping->i2c_pin; + speed = mapping->i2c_speed; + } + + if (pin < GMBUS_NUM_PORTS) { + sdvo->i2c = &dev_priv->gmbus[pin].adapter; + gma_intel_gmbus_set_speed(sdvo->i2c, speed); + gma_intel_gmbus_force_bit(sdvo->i2c, true); + } else + sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter; +} + +static bool +psb_intel_sdvo_is_hdmi_connector(struct psb_intel_sdvo *psb_intel_sdvo, int device) +{ + return psb_intel_sdvo_check_supp_encode(psb_intel_sdvo); +} + +static u8 +psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct sdvo_device_mapping *my_mapping, *other_mapping; + + if (IS_SDVOB(sdvo_reg)) { + my_mapping = &dev_priv->sdvo_mappings[0]; + other_mapping = &dev_priv->sdvo_mappings[1]; + } else { + my_mapping = &dev_priv->sdvo_mappings[1]; + other_mapping = &dev_priv->sdvo_mappings[0]; + } + + /* If the BIOS described our SDVO device, take advantage of it. */ + if (my_mapping->slave_addr) + return my_mapping->slave_addr; + + /* If the BIOS only described a different SDVO device, use the + * address that it isn't using. + */ + if (other_mapping->slave_addr) { + if (other_mapping->slave_addr == 0x70) + return 0x72; + else + return 0x70; + } + + /* No SDVO device info is found for another DVO port, + * so use mapping assumption we had before BIOS parsing. + */ + if (IS_SDVOB(sdvo_reg)) + return 0x70; + else + return 0x72; +} + +static void +psb_intel_sdvo_connector_init(struct psb_intel_sdvo_connector *connector, + struct psb_intel_sdvo *encoder) +{ + drm_connector_init(encoder->base.base.dev, + &connector->base.base, + &psb_intel_sdvo_connector_funcs, + connector->base.base.connector_type); + + drm_connector_helper_add(&connector->base.base, + &psb_intel_sdvo_connector_helper_funcs); + + connector->base.base.interlace_allowed = 0; + connector->base.base.doublescan_allowed = 0; + connector->base.base.display_info.subpixel_order = SubPixelHorizontalRGB; + + connector->base.save = psb_intel_sdvo_save; + connector->base.restore = psb_intel_sdvo_restore; + + gma_connector_attach_encoder(&connector->base, &encoder->base); +} + +static void +psb_intel_sdvo_add_hdmi_properties(struct psb_intel_sdvo_connector *connector) +{ + /* FIXME: We don't support HDMI at the moment + struct drm_device *dev = connector->base.base.dev; + + intel_attach_force_audio_property(&connector->base.base); + intel_attach_broadcast_rgb_property(&connector->base.base); + */ +} + +static bool +psb_intel_sdvo_dvi_init(struct psb_intel_sdvo *psb_intel_sdvo, int device) +{ + struct drm_encoder *encoder = &psb_intel_sdvo->base.base; + struct drm_connector *connector; + struct gma_connector *intel_connector; + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector; + + psb_intel_sdvo_connector = kzalloc(sizeof(struct psb_intel_sdvo_connector), GFP_KERNEL); + if (!psb_intel_sdvo_connector) + return false; + + if (device == 0) { + psb_intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS0; + psb_intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS0; + } else if (device == 1) { + psb_intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS1; + psb_intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS1; + } + + intel_connector = &psb_intel_sdvo_connector->base; + connector = &intel_connector->base; + // connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; + encoder->encoder_type = DRM_MODE_ENCODER_TMDS; + connector->connector_type = DRM_MODE_CONNECTOR_DVID; + + if (psb_intel_sdvo_is_hdmi_connector(psb_intel_sdvo, device)) { + connector->connector_type = DRM_MODE_CONNECTOR_HDMIA; + psb_intel_sdvo->is_hdmi = true; + } + psb_intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) | + (1 << INTEL_ANALOG_CLONE_BIT)); + + psb_intel_sdvo_connector_init(psb_intel_sdvo_connector, psb_intel_sdvo); + if (psb_intel_sdvo->is_hdmi) + psb_intel_sdvo_add_hdmi_properties(psb_intel_sdvo_connector); + + return true; +} + +static bool +psb_intel_sdvo_tv_init(struct psb_intel_sdvo *psb_intel_sdvo, int type) +{ + struct drm_encoder *encoder = &psb_intel_sdvo->base.base; + struct drm_connector *connector; + struct gma_connector *intel_connector; + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector; + + psb_intel_sdvo_connector = kzalloc(sizeof(struct psb_intel_sdvo_connector), GFP_KERNEL); + if (!psb_intel_sdvo_connector) + return false; + + intel_connector = &psb_intel_sdvo_connector->base; + connector = &intel_connector->base; + encoder->encoder_type = DRM_MODE_ENCODER_TVDAC; + connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO; + + psb_intel_sdvo->controlled_output |= type; + psb_intel_sdvo_connector->output_flag = type; + + psb_intel_sdvo->is_tv = true; + psb_intel_sdvo->base.needs_tv_clock = true; + psb_intel_sdvo->base.clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT; + + psb_intel_sdvo_connector_init(psb_intel_sdvo_connector, psb_intel_sdvo); + + if (!psb_intel_sdvo_tv_create_property(psb_intel_sdvo, psb_intel_sdvo_connector, type)) + goto err; + + if (!psb_intel_sdvo_create_enhance_property(psb_intel_sdvo, psb_intel_sdvo_connector)) + goto err; + + return true; + +err: + psb_intel_sdvo_destroy(connector); + return false; +} + +static bool +psb_intel_sdvo_analog_init(struct psb_intel_sdvo *psb_intel_sdvo, int device) +{ + struct drm_encoder *encoder = &psb_intel_sdvo->base.base; + struct drm_connector *connector; + struct gma_connector *intel_connector; + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector; + + psb_intel_sdvo_connector = kzalloc(sizeof(struct psb_intel_sdvo_connector), GFP_KERNEL); + if (!psb_intel_sdvo_connector) + return false; + + intel_connector = &psb_intel_sdvo_connector->base; + connector = &intel_connector->base; + connector->polled = DRM_CONNECTOR_POLL_CONNECT; + encoder->encoder_type = DRM_MODE_ENCODER_DAC; + connector->connector_type = DRM_MODE_CONNECTOR_VGA; + + if (device == 0) { + psb_intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB0; + psb_intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB0; + } else if (device == 1) { + psb_intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB1; + psb_intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1; + } + + psb_intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) | + (1 << INTEL_ANALOG_CLONE_BIT)); + + psb_intel_sdvo_connector_init(psb_intel_sdvo_connector, + psb_intel_sdvo); + return true; +} + +static bool +psb_intel_sdvo_lvds_init(struct psb_intel_sdvo *psb_intel_sdvo, int device) +{ + struct drm_encoder *encoder = &psb_intel_sdvo->base.base; + struct drm_connector *connector; + struct gma_connector *intel_connector; + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector; + + psb_intel_sdvo_connector = kzalloc(sizeof(struct psb_intel_sdvo_connector), GFP_KERNEL); + if (!psb_intel_sdvo_connector) + return false; + + intel_connector = &psb_intel_sdvo_connector->base; + connector = &intel_connector->base; + encoder->encoder_type = DRM_MODE_ENCODER_LVDS; + connector->connector_type = DRM_MODE_CONNECTOR_LVDS; + + if (device == 0) { + psb_intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS0; + psb_intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS0; + } else if (device == 1) { + psb_intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS1; + psb_intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1; + } + + psb_intel_sdvo->base.clone_mask = ((1 << INTEL_ANALOG_CLONE_BIT) | + (1 << INTEL_SDVO_LVDS_CLONE_BIT)); + + psb_intel_sdvo_connector_init(psb_intel_sdvo_connector, psb_intel_sdvo); + if (!psb_intel_sdvo_create_enhance_property(psb_intel_sdvo, psb_intel_sdvo_connector)) + goto err; + + return true; + +err: + psb_intel_sdvo_destroy(connector); + return false; +} + +static bool +psb_intel_sdvo_output_setup(struct psb_intel_sdvo *psb_intel_sdvo, uint16_t flags) +{ + psb_intel_sdvo->is_tv = false; + psb_intel_sdvo->base.needs_tv_clock = false; + psb_intel_sdvo->is_lvds = false; + + /* SDVO requires XXX1 function may not exist unless it has XXX0 function.*/ + + if (flags & SDVO_OUTPUT_TMDS0) + if (!psb_intel_sdvo_dvi_init(psb_intel_sdvo, 0)) + return false; + + if ((flags & SDVO_TMDS_MASK) == SDVO_TMDS_MASK) + if (!psb_intel_sdvo_dvi_init(psb_intel_sdvo, 1)) + return false; + + /* TV has no XXX1 function block */ + if (flags & SDVO_OUTPUT_SVID0) + if (!psb_intel_sdvo_tv_init(psb_intel_sdvo, SDVO_OUTPUT_SVID0)) + return false; + + if (flags & SDVO_OUTPUT_CVBS0) + if (!psb_intel_sdvo_tv_init(psb_intel_sdvo, SDVO_OUTPUT_CVBS0)) + return false; + + if (flags & SDVO_OUTPUT_RGB0) + if (!psb_intel_sdvo_analog_init(psb_intel_sdvo, 0)) + return false; + + if ((flags & SDVO_RGB_MASK) == SDVO_RGB_MASK) + if (!psb_intel_sdvo_analog_init(psb_intel_sdvo, 1)) + return false; + + if (flags & SDVO_OUTPUT_LVDS0) + if (!psb_intel_sdvo_lvds_init(psb_intel_sdvo, 0)) + return false; + + if ((flags & SDVO_LVDS_MASK) == SDVO_LVDS_MASK) + if (!psb_intel_sdvo_lvds_init(psb_intel_sdvo, 1)) + return false; + + if ((flags & SDVO_OUTPUT_MASK) == 0) { + unsigned char bytes[2]; + + psb_intel_sdvo->controlled_output = 0; + memcpy(bytes, &psb_intel_sdvo->caps.output_flags, 2); + DRM_DEBUG_KMS("%s: Unknown SDVO output type (0x%02x%02x)\n", + SDVO_NAME(psb_intel_sdvo), + bytes[0], bytes[1]); + return false; + } + psb_intel_sdvo->base.crtc_mask = (1 << 0) | (1 << 1); + + return true; +} + +static bool psb_intel_sdvo_tv_create_property(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector, + int type) +{ + struct drm_device *dev = psb_intel_sdvo->base.base.dev; + struct psb_intel_sdvo_tv_format format; + uint32_t format_map, i; + + if (!psb_intel_sdvo_set_target_output(psb_intel_sdvo, type)) + return false; + + BUILD_BUG_ON(sizeof(format) != 6); + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_SUPPORTED_TV_FORMATS, + &format, sizeof(format))) + return false; + + memcpy(&format_map, &format, min(sizeof(format_map), sizeof(format))); + + if (format_map == 0) + return false; + + psb_intel_sdvo_connector->format_supported_num = 0; + for (i = 0 ; i < ARRAY_SIZE(tv_format_names); i++) + if (format_map & (1 << i)) + psb_intel_sdvo_connector->tv_format_supported[psb_intel_sdvo_connector->format_supported_num++] = i; + + + psb_intel_sdvo_connector->tv_format = + drm_property_create(dev, DRM_MODE_PROP_ENUM, + "mode", psb_intel_sdvo_connector->format_supported_num); + if (!psb_intel_sdvo_connector->tv_format) + return false; + + for (i = 0; i < psb_intel_sdvo_connector->format_supported_num; i++) + drm_property_add_enum( + psb_intel_sdvo_connector->tv_format, + i, tv_format_names[psb_intel_sdvo_connector->tv_format_supported[i]]); + + psb_intel_sdvo->tv_format_index = psb_intel_sdvo_connector->tv_format_supported[0]; + drm_object_attach_property(&psb_intel_sdvo_connector->base.base.base, + psb_intel_sdvo_connector->tv_format, 0); + return true; + +} + +#define ENHANCEMENT(name, NAME) do { \ + if (enhancements.name) { \ + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, SDVO_CMD_GET_MAX_##NAME, &data_value, 4) || \ + !psb_intel_sdvo_get_value(psb_intel_sdvo, SDVO_CMD_GET_##NAME, &response, 2)) \ + return false; \ + psb_intel_sdvo_connector->max_##name = data_value[0]; \ + psb_intel_sdvo_connector->cur_##name = response; \ + psb_intel_sdvo_connector->name = \ + drm_property_create_range(dev, 0, #name, 0, data_value[0]); \ + if (!psb_intel_sdvo_connector->name) return false; \ + drm_object_attach_property(&connector->base, \ + psb_intel_sdvo_connector->name, \ + psb_intel_sdvo_connector->cur_##name); \ + DRM_DEBUG_KMS(#name ": max %d, default %d, current %d\n", \ + data_value[0], data_value[1], response); \ + } \ +} while(0) + +static bool +psb_intel_sdvo_create_enhance_property_tv(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector, + struct psb_intel_sdvo_enhancements_reply enhancements) +{ + struct drm_device *dev = psb_intel_sdvo->base.base.dev; + struct drm_connector *connector = &psb_intel_sdvo_connector->base.base; + uint16_t response, data_value[2]; + + /* when horizontal overscan is supported, Add the left/right property */ + if (enhancements.overscan_h) { + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_MAX_OVERSCAN_H, + &data_value, 4)) + return false; + + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_OVERSCAN_H, + &response, 2)) + return false; + + psb_intel_sdvo_connector->max_hscan = data_value[0]; + psb_intel_sdvo_connector->left_margin = data_value[0] - response; + psb_intel_sdvo_connector->right_margin = psb_intel_sdvo_connector->left_margin; + psb_intel_sdvo_connector->left = + drm_property_create_range(dev, 0, "left_margin", 0, data_value[0]); + if (!psb_intel_sdvo_connector->left) + return false; + + drm_object_attach_property(&connector->base, + psb_intel_sdvo_connector->left, + psb_intel_sdvo_connector->left_margin); + + psb_intel_sdvo_connector->right = + drm_property_create_range(dev, 0, "right_margin", 0, data_value[0]); + if (!psb_intel_sdvo_connector->right) + return false; + + drm_object_attach_property(&connector->base, + psb_intel_sdvo_connector->right, + psb_intel_sdvo_connector->right_margin); + DRM_DEBUG_KMS("h_overscan: max %d, " + "default %d, current %d\n", + data_value[0], data_value[1], response); + } + + if (enhancements.overscan_v) { + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_MAX_OVERSCAN_V, + &data_value, 4)) + return false; + + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_OVERSCAN_V, + &response, 2)) + return false; + + psb_intel_sdvo_connector->max_vscan = data_value[0]; + psb_intel_sdvo_connector->top_margin = data_value[0] - response; + psb_intel_sdvo_connector->bottom_margin = psb_intel_sdvo_connector->top_margin; + psb_intel_sdvo_connector->top = + drm_property_create_range(dev, 0, "top_margin", 0, data_value[0]); + if (!psb_intel_sdvo_connector->top) + return false; + + drm_object_attach_property(&connector->base, + psb_intel_sdvo_connector->top, + psb_intel_sdvo_connector->top_margin); + + psb_intel_sdvo_connector->bottom = + drm_property_create_range(dev, 0, "bottom_margin", 0, data_value[0]); + if (!psb_intel_sdvo_connector->bottom) + return false; + + drm_object_attach_property(&connector->base, + psb_intel_sdvo_connector->bottom, + psb_intel_sdvo_connector->bottom_margin); + DRM_DEBUG_KMS("v_overscan: max %d, " + "default %d, current %d\n", + data_value[0], data_value[1], response); + } + + ENHANCEMENT(hpos, HPOS); + ENHANCEMENT(vpos, VPOS); + ENHANCEMENT(saturation, SATURATION); + ENHANCEMENT(contrast, CONTRAST); + ENHANCEMENT(hue, HUE); + ENHANCEMENT(sharpness, SHARPNESS); + ENHANCEMENT(brightness, BRIGHTNESS); + ENHANCEMENT(flicker_filter, FLICKER_FILTER); + ENHANCEMENT(flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE); + ENHANCEMENT(flicker_filter_2d, FLICKER_FILTER_2D); + ENHANCEMENT(tv_chroma_filter, TV_CHROMA_FILTER); + ENHANCEMENT(tv_luma_filter, TV_LUMA_FILTER); + + if (enhancements.dot_crawl) { + if (!psb_intel_sdvo_get_value(psb_intel_sdvo, SDVO_CMD_GET_DOT_CRAWL, &response, 2)) + return false; + + psb_intel_sdvo_connector->max_dot_crawl = 1; + psb_intel_sdvo_connector->cur_dot_crawl = response & 0x1; + psb_intel_sdvo_connector->dot_crawl = + drm_property_create_range(dev, 0, "dot_crawl", 0, 1); + if (!psb_intel_sdvo_connector->dot_crawl) + return false; + + drm_object_attach_property(&connector->base, + psb_intel_sdvo_connector->dot_crawl, + psb_intel_sdvo_connector->cur_dot_crawl); + DRM_DEBUG_KMS("dot crawl: current %d\n", response); + } + + return true; +} + +static bool +psb_intel_sdvo_create_enhance_property_lvds(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector, + struct psb_intel_sdvo_enhancements_reply enhancements) +{ + struct drm_device *dev = psb_intel_sdvo->base.base.dev; + struct drm_connector *connector = &psb_intel_sdvo_connector->base.base; + uint16_t response, data_value[2]; + + ENHANCEMENT(brightness, BRIGHTNESS); + + return true; +} +#undef ENHANCEMENT + +static bool psb_intel_sdvo_create_enhance_property(struct psb_intel_sdvo *psb_intel_sdvo, + struct psb_intel_sdvo_connector *psb_intel_sdvo_connector) +{ + union { + struct psb_intel_sdvo_enhancements_reply reply; + uint16_t response; + } enhancements; + + BUILD_BUG_ON(sizeof(enhancements) != 2); + + enhancements.response = 0; + psb_intel_sdvo_get_value(psb_intel_sdvo, + SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS, + &enhancements, sizeof(enhancements)); + if (enhancements.response == 0) { + DRM_DEBUG_KMS("No enhancement is supported\n"); + return true; + } + + if (IS_TV(psb_intel_sdvo_connector)) + return psb_intel_sdvo_create_enhance_property_tv(psb_intel_sdvo, psb_intel_sdvo_connector, enhancements.reply); + else if(IS_LVDS(psb_intel_sdvo_connector)) + return psb_intel_sdvo_create_enhance_property_lvds(psb_intel_sdvo, psb_intel_sdvo_connector, enhancements.reply); + else + return true; +} + +static int psb_intel_sdvo_ddc_proxy_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + struct psb_intel_sdvo *sdvo = adapter->algo_data; + + if (!psb_intel_sdvo_set_control_bus_switch(sdvo, sdvo->ddc_bus)) + return -EIO; + + return sdvo->i2c->algo->master_xfer(sdvo->i2c, msgs, num); +} + +static u32 psb_intel_sdvo_ddc_proxy_func(struct i2c_adapter *adapter) +{ + struct psb_intel_sdvo *sdvo = adapter->algo_data; + return sdvo->i2c->algo->functionality(sdvo->i2c); +} + +static const struct i2c_algorithm psb_intel_sdvo_ddc_proxy = { + .master_xfer = psb_intel_sdvo_ddc_proxy_xfer, + .functionality = psb_intel_sdvo_ddc_proxy_func +}; + +static bool +psb_intel_sdvo_init_ddc_proxy(struct psb_intel_sdvo *sdvo, + struct drm_device *dev) +{ + sdvo->ddc.owner = THIS_MODULE; + sdvo->ddc.class = I2C_CLASS_DDC; + snprintf(sdvo->ddc.name, I2C_NAME_SIZE, "SDVO DDC proxy"); + sdvo->ddc.dev.parent = dev->dev; + sdvo->ddc.algo_data = sdvo; + sdvo->ddc.algo = &psb_intel_sdvo_ddc_proxy; + + return i2c_add_adapter(&sdvo->ddc) == 0; +} + +bool psb_intel_sdvo_init(struct drm_device *dev, int sdvo_reg) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct gma_encoder *gma_encoder; + struct psb_intel_sdvo *psb_intel_sdvo; + int i; + + psb_intel_sdvo = kzalloc(sizeof(struct psb_intel_sdvo), GFP_KERNEL); + if (!psb_intel_sdvo) + return false; + + psb_intel_sdvo->sdvo_reg = sdvo_reg; + psb_intel_sdvo->slave_addr = psb_intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1; + psb_intel_sdvo_select_i2c_bus(dev_priv, psb_intel_sdvo, sdvo_reg); + if (!psb_intel_sdvo_init_ddc_proxy(psb_intel_sdvo, dev)) { + kfree(psb_intel_sdvo); + return false; + } + + /* encoder type will be decided later */ + gma_encoder = &psb_intel_sdvo->base; + gma_encoder->type = INTEL_OUTPUT_SDVO; + drm_encoder_init(dev, &gma_encoder->base, &psb_intel_sdvo_enc_funcs, + 0, NULL); + + /* Read the regs to test if we can talk to the device */ + for (i = 0; i < 0x40; i++) { + u8 byte; + + if (!psb_intel_sdvo_read_byte(psb_intel_sdvo, i, &byte)) { + DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n", + IS_SDVOB(sdvo_reg) ? 'B' : 'C'); + goto err; + } + } + + if (IS_SDVOB(sdvo_reg)) + dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS; + else + dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS; + + drm_encoder_helper_add(&gma_encoder->base, &psb_intel_sdvo_helper_funcs); + + /* In default case sdvo lvds is false */ + if (!psb_intel_sdvo_get_capabilities(psb_intel_sdvo, &psb_intel_sdvo->caps)) + goto err; + + if (psb_intel_sdvo_output_setup(psb_intel_sdvo, + psb_intel_sdvo->caps.output_flags) != true) { + DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n", + IS_SDVOB(sdvo_reg) ? 'B' : 'C'); + goto err; + } + + psb_intel_sdvo_select_ddc_bus(dev_priv, psb_intel_sdvo, sdvo_reg); + + /* Set the input timing to the screen. Assume always input 0. */ + if (!psb_intel_sdvo_set_target_input(psb_intel_sdvo)) + goto err; + + if (!psb_intel_sdvo_get_input_pixel_clock_range(psb_intel_sdvo, + &psb_intel_sdvo->pixel_clock_min, + &psb_intel_sdvo->pixel_clock_max)) + goto err; + + DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " + "clock range %dMHz - %dMHz, " + "input 1: %c, input 2: %c, " + "output 1: %c, output 2: %c\n", + SDVO_NAME(psb_intel_sdvo), + psb_intel_sdvo->caps.vendor_id, psb_intel_sdvo->caps.device_id, + psb_intel_sdvo->caps.device_rev_id, + psb_intel_sdvo->pixel_clock_min / 1000, + psb_intel_sdvo->pixel_clock_max / 1000, + (psb_intel_sdvo->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', + (psb_intel_sdvo->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', + /* check currently supported outputs */ + psb_intel_sdvo->caps.output_flags & + (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', + psb_intel_sdvo->caps.output_flags & + (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); + return true; + +err: + drm_encoder_cleanup(&gma_encoder->base); + i2c_del_adapter(&psb_intel_sdvo->ddc); + kfree(psb_intel_sdvo); + + return false; +} diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h b/drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h new file mode 100644 index 000000000..600e79744 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo_regs.h @@ -0,0 +1,723 @@ +/* + * Copyright ? 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +/** + * @file SDVO command definitions and structures. + */ + +#define SDVO_OUTPUT_FIRST (0) +#define SDVO_OUTPUT_TMDS0 (1 << 0) +#define SDVO_OUTPUT_RGB0 (1 << 1) +#define SDVO_OUTPUT_CVBS0 (1 << 2) +#define SDVO_OUTPUT_SVID0 (1 << 3) +#define SDVO_OUTPUT_YPRPB0 (1 << 4) +#define SDVO_OUTPUT_SCART0 (1 << 5) +#define SDVO_OUTPUT_LVDS0 (1 << 6) +#define SDVO_OUTPUT_TMDS1 (1 << 8) +#define SDVO_OUTPUT_RGB1 (1 << 9) +#define SDVO_OUTPUT_CVBS1 (1 << 10) +#define SDVO_OUTPUT_SVID1 (1 << 11) +#define SDVO_OUTPUT_YPRPB1 (1 << 12) +#define SDVO_OUTPUT_SCART1 (1 << 13) +#define SDVO_OUTPUT_LVDS1 (1 << 14) +#define SDVO_OUTPUT_LAST (14) + +struct psb_intel_sdvo_caps { + u8 vendor_id; + u8 device_id; + u8 device_rev_id; + u8 sdvo_version_major; + u8 sdvo_version_minor; + unsigned int sdvo_inputs_mask:2; + unsigned int smooth_scaling:1; + unsigned int sharp_scaling:1; + unsigned int up_scaling:1; + unsigned int down_scaling:1; + unsigned int stall_support:1; + unsigned int pad:1; + u16 output_flags; +} __attribute__((packed)); + +/** This matches the EDID DTD structure, more or less */ +struct psb_intel_sdvo_dtd { + struct { + u16 clock; /**< pixel clock, in 10kHz units */ + u8 h_active; /**< lower 8 bits (pixels) */ + u8 h_blank; /**< lower 8 bits (pixels) */ + u8 h_high; /**< upper 4 bits each h_active, h_blank */ + u8 v_active; /**< lower 8 bits (lines) */ + u8 v_blank; /**< lower 8 bits (lines) */ + u8 v_high; /**< upper 4 bits each v_active, v_blank */ + } part1; + + struct { + u8 h_sync_off; /**< lower 8 bits, from hblank start */ + u8 h_sync_width; /**< lower 8 bits (pixels) */ + /** lower 4 bits each vsync offset, vsync width */ + u8 v_sync_off_width; + /** + * 2 high bits of hsync offset, 2 high bits of hsync width, + * bits 4-5 of vsync offset, and 2 high bits of vsync width. + */ + u8 sync_off_width_high; + u8 dtd_flags; + u8 sdvo_flags; + /** bits 6-7 of vsync offset at bits 6-7 */ + u8 v_sync_off_high; + u8 reserved; + } part2; +} __attribute__((packed)); + +struct psb_intel_sdvo_pixel_clock_range { + u16 min; /**< pixel clock, in 10kHz units */ + u16 max; /**< pixel clock, in 10kHz units */ +} __attribute__((packed)); + +struct psb_intel_sdvo_preferred_input_timing_args { + u16 clock; + u16 width; + u16 height; + u8 interlace:1; + u8 scaled:1; + u8 pad:6; +} __attribute__((packed)); + +/* I2C registers for SDVO */ +#define SDVO_I2C_ARG_0 0x07 +#define SDVO_I2C_ARG_1 0x06 +#define SDVO_I2C_ARG_2 0x05 +#define SDVO_I2C_ARG_3 0x04 +#define SDVO_I2C_ARG_4 0x03 +#define SDVO_I2C_ARG_5 0x02 +#define SDVO_I2C_ARG_6 0x01 +#define SDVO_I2C_ARG_7 0x00 +#define SDVO_I2C_OPCODE 0x08 +#define SDVO_I2C_CMD_STATUS 0x09 +#define SDVO_I2C_RETURN_0 0x0a +#define SDVO_I2C_RETURN_1 0x0b +#define SDVO_I2C_RETURN_2 0x0c +#define SDVO_I2C_RETURN_3 0x0d +#define SDVO_I2C_RETURN_4 0x0e +#define SDVO_I2C_RETURN_5 0x0f +#define SDVO_I2C_RETURN_6 0x10 +#define SDVO_I2C_RETURN_7 0x11 +#define SDVO_I2C_VENDOR_BEGIN 0x20 + +/* Status results */ +#define SDVO_CMD_STATUS_POWER_ON 0x0 +#define SDVO_CMD_STATUS_SUCCESS 0x1 +#define SDVO_CMD_STATUS_NOTSUPP 0x2 +#define SDVO_CMD_STATUS_INVALID_ARG 0x3 +#define SDVO_CMD_STATUS_PENDING 0x4 +#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5 +#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6 + +/* SDVO commands, argument/result registers */ + +#define SDVO_CMD_RESET 0x01 + +/** Returns a struct intel_sdvo_caps */ +#define SDVO_CMD_GET_DEVICE_CAPS 0x02 + +#define SDVO_CMD_GET_FIRMWARE_REV 0x86 +# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0 +# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1 +# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2 + +/** + * Reports which inputs are trained (managed to sync). + * + * Devices must have trained within 2 vsyncs of a mode change. + */ +#define SDVO_CMD_GET_TRAINED_INPUTS 0x03 +struct psb_intel_sdvo_get_trained_inputs_response { + unsigned int input0_trained:1; + unsigned int input1_trained:1; + unsigned int pad:6; +} __attribute__((packed)); + +/** Returns a struct intel_sdvo_output_flags of active outputs. */ +#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04 + +/** + * Sets the current set of active outputs. + * + * Takes a struct intel_sdvo_output_flags. Must be preceded by a SET_IN_OUT_MAP + * on multi-output devices. + */ +#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05 + +/** + * Returns the current mapping of SDVO inputs to outputs on the device. + * + * Returns two struct intel_sdvo_output_flags structures. + */ +#define SDVO_CMD_GET_IN_OUT_MAP 0x06 +struct psb_intel_sdvo_in_out_map { + u16 in0, in1; +}; + +/** + * Sets the current mapping of SDVO inputs to outputs on the device. + * + * Takes two struct i380_sdvo_output_flags structures. + */ +#define SDVO_CMD_SET_IN_OUT_MAP 0x07 + +/** + * Returns a struct intel_sdvo_output_flags of attached displays. + */ +#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b + +/** + * Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging. + */ +#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c + +/** + * Takes a struct intel_sdvo_output_flags. + */ +#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d + +/** + * Returns a struct intel_sdvo_output_flags of displays with hot plug + * interrupts enabled. + */ +#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e + +#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f +struct intel_sdvo_get_interrupt_event_source_response { + u16 interrupt_status; + unsigned int ambient_light_interrupt:1; + unsigned int hdmi_audio_encrypt_change:1; + unsigned int pad:6; +} __attribute__((packed)); + +/** + * Selects which input is affected by future input commands. + * + * Commands affected include SET_INPUT_TIMINGS_PART[12], + * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12], + * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS. + */ +#define SDVO_CMD_SET_TARGET_INPUT 0x10 +struct psb_intel_sdvo_set_target_input_args { + unsigned int target_1:1; + unsigned int pad:7; +} __attribute__((packed)); + +/** + * Takes a struct intel_sdvo_output_flags of which outputs are targeted by + * future output commands. + * + * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12], + * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE. + */ +#define SDVO_CMD_SET_TARGET_OUTPUT 0x11 + +#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12 +#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19 +/* Part 1 */ +# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2 +# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3 +# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4 +# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5 +# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6 +# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7 +/* Part 2 */ +# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0 +# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1 +# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2 +# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4 +# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7) +# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5) +# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3) +# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1) +# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5 +# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7) +# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6) +# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6) +# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4) +# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6 + +/** + * Generates a DTD based on the given width, height, and flags. + * + * This will be supported by any device supporting scaling or interlaced + * modes. + */ +#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0) +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1) + +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c + +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e + +/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */ +#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f + +/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20 +/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21 +# define SDVO_CLOCK_RATE_MULT_1X (1 << 0) +# define SDVO_CLOCK_RATE_MULT_2X (1 << 1) +# define SDVO_CLOCK_RATE_MULT_4X (1 << 3) + +#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27 +/** 6 bytes of bit flags for TV formats shared by all TV format functions */ +struct psb_intel_sdvo_tv_format { + unsigned int ntsc_m:1; + unsigned int ntsc_j:1; + unsigned int ntsc_443:1; + unsigned int pal_b:1; + unsigned int pal_d:1; + unsigned int pal_g:1; + unsigned int pal_h:1; + unsigned int pal_i:1; + + unsigned int pal_m:1; + unsigned int pal_n:1; + unsigned int pal_nc:1; + unsigned int pal_60:1; + unsigned int secam_b:1; + unsigned int secam_d:1; + unsigned int secam_g:1; + unsigned int secam_k:1; + + unsigned int secam_k1:1; + unsigned int secam_l:1; + unsigned int secam_60:1; + unsigned int hdtv_std_smpte_240m_1080i_59:1; + unsigned int hdtv_std_smpte_240m_1080i_60:1; + unsigned int hdtv_std_smpte_260m_1080i_59:1; + unsigned int hdtv_std_smpte_260m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080i_50:1; + + unsigned int hdtv_std_smpte_274m_1080i_59:1; + unsigned int hdtv_std_smpte_274m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080p_23:1; + unsigned int hdtv_std_smpte_274m_1080p_24:1; + unsigned int hdtv_std_smpte_274m_1080p_25:1; + unsigned int hdtv_std_smpte_274m_1080p_29:1; + unsigned int hdtv_std_smpte_274m_1080p_30:1; + unsigned int hdtv_std_smpte_274m_1080p_50:1; + + unsigned int hdtv_std_smpte_274m_1080p_59:1; + unsigned int hdtv_std_smpte_274m_1080p_60:1; + unsigned int hdtv_std_smpte_295m_1080i_50:1; + unsigned int hdtv_std_smpte_295m_1080p_50:1; + unsigned int hdtv_std_smpte_296m_720p_59:1; + unsigned int hdtv_std_smpte_296m_720p_60:1; + unsigned int hdtv_std_smpte_296m_720p_50:1; + unsigned int hdtv_std_smpte_293m_480p_59:1; + + unsigned int hdtv_std_smpte_170m_480i_59:1; + unsigned int hdtv_std_iturbt601_576i_50:1; + unsigned int hdtv_std_iturbt601_576p_50:1; + unsigned int hdtv_std_eia_7702a_480i_60:1; + unsigned int hdtv_std_eia_7702a_480p_60:1; + unsigned int pad:3; +} __attribute__((packed)); + +#define SDVO_CMD_GET_TV_FORMAT 0x28 + +#define SDVO_CMD_SET_TV_FORMAT 0x29 + +/** Returns the resolutiosn that can be used with the given TV format */ +#define SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT 0x83 +struct psb_intel_sdvo_sdtv_resolution_request { + unsigned int ntsc_m:1; + unsigned int ntsc_j:1; + unsigned int ntsc_443:1; + unsigned int pal_b:1; + unsigned int pal_d:1; + unsigned int pal_g:1; + unsigned int pal_h:1; + unsigned int pal_i:1; + + unsigned int pal_m:1; + unsigned int pal_n:1; + unsigned int pal_nc:1; + unsigned int pal_60:1; + unsigned int secam_b:1; + unsigned int secam_d:1; + unsigned int secam_g:1; + unsigned int secam_k:1; + + unsigned int secam_k1:1; + unsigned int secam_l:1; + unsigned int secam_60:1; + unsigned int pad:5; +} __attribute__((packed)); + +struct psb_intel_sdvo_sdtv_resolution_reply { + unsigned int res_320x200:1; + unsigned int res_320x240:1; + unsigned int res_400x300:1; + unsigned int res_640x350:1; + unsigned int res_640x400:1; + unsigned int res_640x480:1; + unsigned int res_704x480:1; + unsigned int res_704x576:1; + + unsigned int res_720x350:1; + unsigned int res_720x400:1; + unsigned int res_720x480:1; + unsigned int res_720x540:1; + unsigned int res_720x576:1; + unsigned int res_768x576:1; + unsigned int res_800x600:1; + unsigned int res_832x624:1; + + unsigned int res_920x766:1; + unsigned int res_1024x768:1; + unsigned int res_1280x1024:1; + unsigned int pad:5; +} __attribute__((packed)); + +/* Get supported resolution with squire pixel aspect ratio that can be + scaled for the requested HDTV format */ +#define SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT 0x85 + +struct psb_intel_sdvo_hdtv_resolution_request { + unsigned int hdtv_std_smpte_240m_1080i_59:1; + unsigned int hdtv_std_smpte_240m_1080i_60:1; + unsigned int hdtv_std_smpte_260m_1080i_59:1; + unsigned int hdtv_std_smpte_260m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080i_50:1; + unsigned int hdtv_std_smpte_274m_1080i_59:1; + unsigned int hdtv_std_smpte_274m_1080i_60:1; + unsigned int hdtv_std_smpte_274m_1080p_23:1; + + unsigned int hdtv_std_smpte_274m_1080p_24:1; + unsigned int hdtv_std_smpte_274m_1080p_25:1; + unsigned int hdtv_std_smpte_274m_1080p_29:1; + unsigned int hdtv_std_smpte_274m_1080p_30:1; + unsigned int hdtv_std_smpte_274m_1080p_50:1; + unsigned int hdtv_std_smpte_274m_1080p_59:1; + unsigned int hdtv_std_smpte_274m_1080p_60:1; + unsigned int hdtv_std_smpte_295m_1080i_50:1; + + unsigned int hdtv_std_smpte_295m_1080p_50:1; + unsigned int hdtv_std_smpte_296m_720p_59:1; + unsigned int hdtv_std_smpte_296m_720p_60:1; + unsigned int hdtv_std_smpte_296m_720p_50:1; + unsigned int hdtv_std_smpte_293m_480p_59:1; + unsigned int hdtv_std_smpte_170m_480i_59:1; + unsigned int hdtv_std_iturbt601_576i_50:1; + unsigned int hdtv_std_iturbt601_576p_50:1; + + unsigned int hdtv_std_eia_7702a_480i_60:1; + unsigned int hdtv_std_eia_7702a_480p_60:1; + unsigned int pad:6; +} __attribute__((packed)); + +struct psb_intel_sdvo_hdtv_resolution_reply { + unsigned int res_640x480:1; + unsigned int res_800x600:1; + unsigned int res_1024x768:1; + unsigned int res_1280x960:1; + unsigned int res_1400x1050:1; + unsigned int res_1600x1200:1; + unsigned int res_1920x1440:1; + unsigned int res_2048x1536:1; + + unsigned int res_2560x1920:1; + unsigned int res_3200x2400:1; + unsigned int res_3840x2880:1; + unsigned int pad1:5; + + unsigned int res_848x480:1; + unsigned int res_1064x600:1; + unsigned int res_1280x720:1; + unsigned int res_1360x768:1; + unsigned int res_1704x960:1; + unsigned int res_1864x1050:1; + unsigned int res_1920x1080:1; + unsigned int res_2128x1200:1; + + unsigned int res_2560x1400:1; + unsigned int res_2728x1536:1; + unsigned int res_3408x1920:1; + unsigned int res_4264x2400:1; + unsigned int res_5120x2880:1; + unsigned int pad2:3; + + unsigned int res_768x480:1; + unsigned int res_960x600:1; + unsigned int res_1152x720:1; + unsigned int res_1124x768:1; + unsigned int res_1536x960:1; + unsigned int res_1680x1050:1; + unsigned int res_1728x1080:1; + unsigned int res_1920x1200:1; + + unsigned int res_2304x1440:1; + unsigned int res_2456x1536:1; + unsigned int res_3072x1920:1; + unsigned int res_3840x2400:1; + unsigned int res_4608x2880:1; + unsigned int pad3:3; + + unsigned int res_1280x1024:1; + unsigned int pad4:7; + + unsigned int res_1280x768:1; + unsigned int pad5:7; +} __attribute__((packed)); + +/* Get supported power state returns info for encoder and monitor, rely on + last SetTargetInput and SetTargetOutput calls */ +#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a +/* Get power state returns info for encoder and monitor, rely on last + SetTargetInput and SetTargetOutput calls */ +#define SDVO_CMD_GET_POWER_STATE 0x2b +#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b +#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c +# define SDVO_ENCODER_STATE_ON (1 << 0) +# define SDVO_ENCODER_STATE_STANDBY (1 << 1) +# define SDVO_ENCODER_STATE_SUSPEND (1 << 2) +# define SDVO_ENCODER_STATE_OFF (1 << 3) +# define SDVO_MONITOR_STATE_ON (1 << 4) +# define SDVO_MONITOR_STATE_STANDBY (1 << 5) +# define SDVO_MONITOR_STATE_SUSPEND (1 << 6) +# define SDVO_MONITOR_STATE_OFF (1 << 7) + +#define SDVO_CMD_GET_MAX_PANEL_POWER_SEQUENCING 0x2d +#define SDVO_CMD_GET_PANEL_POWER_SEQUENCING 0x2e +#define SDVO_CMD_SET_PANEL_POWER_SEQUENCING 0x2f +/** + * The panel power sequencing parameters are in units of milliseconds. + * The high fields are bits 8:9 of the 10-bit values. + */ +struct psb_sdvo_panel_power_sequencing { + u8 t0; + u8 t1; + u8 t2; + u8 t3; + u8 t4; + + unsigned int t0_high:2; + unsigned int t1_high:2; + unsigned int t2_high:2; + unsigned int t3_high:2; + + unsigned int t4_high:2; + unsigned int pad:6; +} __attribute__((packed)); + +#define SDVO_CMD_GET_MAX_BACKLIGHT_LEVEL 0x30 +struct sdvo_max_backlight_reply { + u8 max_value; + u8 default_value; +} __attribute__((packed)); + +#define SDVO_CMD_GET_BACKLIGHT_LEVEL 0x31 +#define SDVO_CMD_SET_BACKLIGHT_LEVEL 0x32 + +#define SDVO_CMD_GET_AMBIENT_LIGHT 0x33 +struct sdvo_get_ambient_light_reply { + u16 trip_low; + u16 trip_high; + u16 value; +} __attribute__((packed)); +#define SDVO_CMD_SET_AMBIENT_LIGHT 0x34 +struct sdvo_set_ambient_light_reply { + u16 trip_low; + u16 trip_high; + unsigned int enable:1; + unsigned int pad:7; +} __attribute__((packed)); + +/* Set display power state */ +#define SDVO_CMD_SET_DISPLAY_POWER_STATE 0x7d +# define SDVO_DISPLAY_STATE_ON (1 << 0) +# define SDVO_DISPLAY_STATE_STANDBY (1 << 1) +# define SDVO_DISPLAY_STATE_SUSPEND (1 << 2) +# define SDVO_DISPLAY_STATE_OFF (1 << 3) + +#define SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS 0x84 +struct psb_intel_sdvo_enhancements_reply { + unsigned int flicker_filter:1; + unsigned int flicker_filter_adaptive:1; + unsigned int flicker_filter_2d:1; + unsigned int saturation:1; + unsigned int hue:1; + unsigned int brightness:1; + unsigned int contrast:1; + unsigned int overscan_h:1; + + unsigned int overscan_v:1; + unsigned int hpos:1; + unsigned int vpos:1; + unsigned int sharpness:1; + unsigned int dot_crawl:1; + unsigned int dither:1; + unsigned int tv_chroma_filter:1; + unsigned int tv_luma_filter:1; +} __attribute__((packed)); + +/* Picture enhancement limits below are dependent on the current TV format, + * and thus need to be queried and set after it. + */ +#define SDVO_CMD_GET_MAX_FLICKER_FILTER 0x4d +#define SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE 0x7b +#define SDVO_CMD_GET_MAX_FLICKER_FILTER_2D 0x52 +#define SDVO_CMD_GET_MAX_SATURATION 0x55 +#define SDVO_CMD_GET_MAX_HUE 0x58 +#define SDVO_CMD_GET_MAX_BRIGHTNESS 0x5b +#define SDVO_CMD_GET_MAX_CONTRAST 0x5e +#define SDVO_CMD_GET_MAX_OVERSCAN_H 0x61 +#define SDVO_CMD_GET_MAX_OVERSCAN_V 0x64 +#define SDVO_CMD_GET_MAX_HPOS 0x67 +#define SDVO_CMD_GET_MAX_VPOS 0x6a +#define SDVO_CMD_GET_MAX_SHARPNESS 0x6d +#define SDVO_CMD_GET_MAX_TV_CHROMA_FILTER 0x74 +#define SDVO_CMD_GET_MAX_TV_LUMA_FILTER 0x77 +struct psb_intel_sdvo_enhancement_limits_reply { + u16 max_value; + u16 default_value; +} __attribute__((packed)); + +#define SDVO_CMD_GET_LVDS_PANEL_INFORMATION 0x7f +#define SDVO_CMD_SET_LVDS_PANEL_INFORMATION 0x80 +# define SDVO_LVDS_COLOR_DEPTH_18 (0 << 0) +# define SDVO_LVDS_COLOR_DEPTH_24 (1 << 0) +# define SDVO_LVDS_CONNECTOR_SPWG (0 << 2) +# define SDVO_LVDS_CONNECTOR_OPENLDI (1 << 2) +# define SDVO_LVDS_SINGLE_CHANNEL (0 << 4) +# define SDVO_LVDS_DUAL_CHANNEL (1 << 4) + +#define SDVO_CMD_GET_FLICKER_FILTER 0x4e +#define SDVO_CMD_SET_FLICKER_FILTER 0x4f +#define SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE 0x50 +#define SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE 0x51 +#define SDVO_CMD_GET_FLICKER_FILTER_2D 0x53 +#define SDVO_CMD_SET_FLICKER_FILTER_2D 0x54 +#define SDVO_CMD_GET_SATURATION 0x56 +#define SDVO_CMD_SET_SATURATION 0x57 +#define SDVO_CMD_GET_HUE 0x59 +#define SDVO_CMD_SET_HUE 0x5a +#define SDVO_CMD_GET_BRIGHTNESS 0x5c +#define SDVO_CMD_SET_BRIGHTNESS 0x5d +#define SDVO_CMD_GET_CONTRAST 0x5f +#define SDVO_CMD_SET_CONTRAST 0x60 +#define SDVO_CMD_GET_OVERSCAN_H 0x62 +#define SDVO_CMD_SET_OVERSCAN_H 0x63 +#define SDVO_CMD_GET_OVERSCAN_V 0x65 +#define SDVO_CMD_SET_OVERSCAN_V 0x66 +#define SDVO_CMD_GET_HPOS 0x68 +#define SDVO_CMD_SET_HPOS 0x69 +#define SDVO_CMD_GET_VPOS 0x6b +#define SDVO_CMD_SET_VPOS 0x6c +#define SDVO_CMD_GET_SHARPNESS 0x6e +#define SDVO_CMD_SET_SHARPNESS 0x6f +#define SDVO_CMD_GET_TV_CHROMA_FILTER 0x75 +#define SDVO_CMD_SET_TV_CHROMA_FILTER 0x76 +#define SDVO_CMD_GET_TV_LUMA_FILTER 0x78 +#define SDVO_CMD_SET_TV_LUMA_FILTER 0x79 +struct psb_intel_sdvo_enhancements_arg { + u16 value; +}__attribute__((packed)); + +#define SDVO_CMD_GET_DOT_CRAWL 0x70 +#define SDVO_CMD_SET_DOT_CRAWL 0x71 +# define SDVO_DOT_CRAWL_ON (1 << 0) +# define SDVO_DOT_CRAWL_DEFAULT_ON (1 << 1) + +#define SDVO_CMD_GET_DITHER 0x72 +#define SDVO_CMD_SET_DITHER 0x73 +# define SDVO_DITHER_ON (1 << 0) +# define SDVO_DITHER_DEFAULT_ON (1 << 1) + +#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a +# define SDVO_CONTROL_BUS_PROM (1 << 0) +# define SDVO_CONTROL_BUS_DDC1 (1 << 1) +# define SDVO_CONTROL_BUS_DDC2 (1 << 2) +# define SDVO_CONTROL_BUS_DDC3 (1 << 3) + +/* HDMI op codes */ +#define SDVO_CMD_GET_SUPP_ENCODE 0x9d +#define SDVO_CMD_GET_ENCODE 0x9e +#define SDVO_CMD_SET_ENCODE 0x9f + #define SDVO_ENCODE_DVI 0x0 + #define SDVO_ENCODE_HDMI 0x1 +#define SDVO_CMD_SET_PIXEL_REPLI 0x8b +#define SDVO_CMD_GET_PIXEL_REPLI 0x8c +#define SDVO_CMD_GET_COLORIMETRY_CAP 0x8d +#define SDVO_CMD_SET_COLORIMETRY 0x8e + #define SDVO_COLORIMETRY_RGB256 0x0 + #define SDVO_COLORIMETRY_RGB220 0x1 + #define SDVO_COLORIMETRY_YCrCb422 0x3 + #define SDVO_COLORIMETRY_YCrCb444 0x4 +#define SDVO_CMD_GET_COLORIMETRY 0x8f +#define SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER 0x90 +#define SDVO_CMD_SET_AUDIO_STAT 0x91 +#define SDVO_CMD_GET_AUDIO_STAT 0x92 +#define SDVO_CMD_SET_HBUF_INDEX 0x93 +#define SDVO_CMD_GET_HBUF_INDEX 0x94 +#define SDVO_CMD_GET_HBUF_INFO 0x95 +#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96 +#define SDVO_CMD_GET_HBUF_AV_SPLIT 0x97 +#define SDVO_CMD_SET_HBUF_DATA 0x98 +#define SDVO_CMD_GET_HBUF_DATA 0x99 +#define SDVO_CMD_SET_HBUF_TXRATE 0x9a +#define SDVO_CMD_GET_HBUF_TXRATE 0x9b + #define SDVO_HBUF_TX_DISABLED (0 << 6) + #define SDVO_HBUF_TX_ONCE (2 << 6) + #define SDVO_HBUF_TX_VSYNC (3 << 6) +#define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c +#define SDVO_NEED_TO_STALL (1 << 7) + +struct psb_intel_sdvo_encode { + u8 dvi_rev; + u8 hdmi_rev; +} __attribute__ ((packed)); diff --git a/drivers/gpu/drm/gma500/psb_irq.c b/drivers/gpu/drm/gma500/psb_irq.c new file mode 100644 index 000000000..ab2d49dab --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_irq.c @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2007, Intel Corporation. + * All Rights Reserved. + * + * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + * develop this driver. + * + **************************************************************************/ + +#include <drm/drm_drv.h> +#include <drm/drm_vblank.h> + +#include "power.h" +#include "psb_drv.h" +#include "psb_intel_reg.h" +#include "psb_irq.h" +#include "psb_reg.h" + +/* + * inline functions + */ + +static inline u32 gma_pipestat(int pipe) +{ + if (pipe == 0) + return PIPEASTAT; + if (pipe == 1) + return PIPEBSTAT; + if (pipe == 2) + return PIPECSTAT; + BUG(); +} + +static inline u32 gma_pipe_event(int pipe) +{ + if (pipe == 0) + return _PSB_PIPEA_EVENT_FLAG; + if (pipe == 1) + return _MDFLD_PIPEB_EVENT_FLAG; + if (pipe == 2) + return _MDFLD_PIPEC_EVENT_FLAG; + BUG(); +} + +static inline u32 gma_pipeconf(int pipe) +{ + if (pipe == 0) + return PIPEACONF; + if (pipe == 1) + return PIPEBCONF; + if (pipe == 2) + return PIPECCONF; + BUG(); +} + +void gma_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != mask) { + u32 reg = gma_pipestat(pipe); + dev_priv->pipestat[pipe] |= mask; + /* Enable the interrupt, clear any pending status */ + if (gma_power_begin(&dev_priv->dev, false)) { + u32 writeVal = PSB_RVDC32(reg); + writeVal |= (mask | (mask >> 16)); + PSB_WVDC32(writeVal, reg); + (void) PSB_RVDC32(reg); + gma_power_end(&dev_priv->dev); + } + } +} + +void gma_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != 0) { + u32 reg = gma_pipestat(pipe); + dev_priv->pipestat[pipe] &= ~mask; + if (gma_power_begin(&dev_priv->dev, false)) { + u32 writeVal = PSB_RVDC32(reg); + writeVal &= ~mask; + PSB_WVDC32(writeVal, reg); + (void) PSB_RVDC32(reg); + gma_power_end(&dev_priv->dev); + } + } +} + +/* + * Display controller interrupt handler for pipe event. + */ +static void gma_pipe_event_handler(struct drm_device *dev, int pipe) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + + uint32_t pipe_stat_val = 0; + uint32_t pipe_stat_reg = gma_pipestat(pipe); + uint32_t pipe_enable = dev_priv->pipestat[pipe]; + uint32_t pipe_status = dev_priv->pipestat[pipe] >> 16; + uint32_t pipe_clear; + uint32_t i = 0; + + spin_lock(&dev_priv->irqmask_lock); + + pipe_stat_val = PSB_RVDC32(pipe_stat_reg); + pipe_stat_val &= pipe_enable | pipe_status; + pipe_stat_val &= pipe_stat_val >> 16; + + spin_unlock(&dev_priv->irqmask_lock); + + /* Clear the 2nd level interrupt status bits + * Sometimes the bits are very sticky so we repeat until they unstick */ + for (i = 0; i < 0xffff; i++) { + PSB_WVDC32(PSB_RVDC32(pipe_stat_reg), pipe_stat_reg); + pipe_clear = PSB_RVDC32(pipe_stat_reg) & pipe_status; + + if (pipe_clear == 0) + break; + } + + if (pipe_clear) + dev_err(dev->dev, + "%s, can't clear status bits for pipe %d, its value = 0x%x.\n", + __func__, pipe, PSB_RVDC32(pipe_stat_reg)); + + if (pipe_stat_val & PIPE_VBLANK_STATUS) { + struct drm_crtc *crtc = drm_crtc_from_index(dev, pipe); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + unsigned long flags; + + drm_handle_vblank(dev, pipe); + + spin_lock_irqsave(&dev->event_lock, flags); + if (gma_crtc->page_flip_event) { + drm_crtc_send_vblank_event(crtc, + gma_crtc->page_flip_event); + gma_crtc->page_flip_event = NULL; + drm_crtc_vblank_put(crtc); + } + spin_unlock_irqrestore(&dev->event_lock, flags); + } +} + +/* + * Display controller interrupt handler. + */ +static void gma_vdc_interrupt(struct drm_device *dev, uint32_t vdc_stat) +{ + if (vdc_stat & _PSB_IRQ_ASLE) + psb_intel_opregion_asle_intr(dev); + + if (vdc_stat & _PSB_VSYNC_PIPEA_FLAG) + gma_pipe_event_handler(dev, 0); + + if (vdc_stat & _PSB_VSYNC_PIPEB_FLAG) + gma_pipe_event_handler(dev, 1); +} + +/* + * SGX interrupt handler + */ +static void gma_sgx_interrupt(struct drm_device *dev, u32 stat_1, u32 stat_2) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + u32 val, addr; + + if (stat_1 & _PSB_CE_TWOD_COMPLETE) + val = PSB_RSGX32(PSB_CR_2D_BLIT_STATUS); + + if (stat_2 & _PSB_CE2_BIF_REQUESTER_FAULT) { + val = PSB_RSGX32(PSB_CR_BIF_INT_STAT); + addr = PSB_RSGX32(PSB_CR_BIF_FAULT); + if (val) { + if (val & _PSB_CBI_STAT_PF_N_RW) + DRM_ERROR("SGX MMU page fault:"); + else + DRM_ERROR("SGX MMU read / write protection fault:"); + + if (val & _PSB_CBI_STAT_FAULT_CACHE) + DRM_ERROR("\tCache requestor"); + if (val & _PSB_CBI_STAT_FAULT_TA) + DRM_ERROR("\tTA requestor"); + if (val & _PSB_CBI_STAT_FAULT_VDM) + DRM_ERROR("\tVDM requestor"); + if (val & _PSB_CBI_STAT_FAULT_2D) + DRM_ERROR("\t2D requestor"); + if (val & _PSB_CBI_STAT_FAULT_PBE) + DRM_ERROR("\tPBE requestor"); + if (val & _PSB_CBI_STAT_FAULT_TSP) + DRM_ERROR("\tTSP requestor"); + if (val & _PSB_CBI_STAT_FAULT_ISP) + DRM_ERROR("\tISP requestor"); + if (val & _PSB_CBI_STAT_FAULT_USSEPDS) + DRM_ERROR("\tUSSEPDS requestor"); + if (val & _PSB_CBI_STAT_FAULT_HOST) + DRM_ERROR("\tHost requestor"); + + DRM_ERROR("\tMMU failing address is 0x%08x.\n", + (unsigned int)addr); + } + } + + /* Clear bits */ + PSB_WSGX32(stat_1, PSB_CR_EVENT_HOST_CLEAR); + PSB_WSGX32(stat_2, PSB_CR_EVENT_HOST_CLEAR2); + PSB_RSGX32(PSB_CR_EVENT_HOST_CLEAR2); +} + +static irqreturn_t gma_irq_handler(int irq, void *arg) +{ + struct drm_device *dev = arg; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + uint32_t vdc_stat, dsp_int = 0, sgx_int = 0, hotplug_int = 0; + u32 sgx_stat_1, sgx_stat_2; + int handled = 0; + + spin_lock(&dev_priv->irqmask_lock); + + vdc_stat = PSB_RVDC32(PSB_INT_IDENTITY_R); + + if (vdc_stat & (_PSB_PIPE_EVENT_FLAG|_PSB_IRQ_ASLE)) + dsp_int = 1; + + if (vdc_stat & _PSB_IRQ_SGX_FLAG) + sgx_int = 1; + if (vdc_stat & _PSB_IRQ_DISP_HOTSYNC) + hotplug_int = 1; + + vdc_stat &= dev_priv->vdc_irq_mask; + spin_unlock(&dev_priv->irqmask_lock); + + if (dsp_int) { + gma_vdc_interrupt(dev, vdc_stat); + handled = 1; + } + + if (sgx_int) { + sgx_stat_1 = PSB_RSGX32(PSB_CR_EVENT_STATUS); + sgx_stat_2 = PSB_RSGX32(PSB_CR_EVENT_STATUS2); + gma_sgx_interrupt(dev, sgx_stat_1, sgx_stat_2); + handled = 1; + } + + /* Note: this bit has other meanings on some devices, so we will + need to address that later if it ever matters */ + if (hotplug_int && dev_priv->ops->hotplug) { + handled = dev_priv->ops->hotplug(dev); + REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); + } + + PSB_WVDC32(vdc_stat, PSB_INT_IDENTITY_R); + (void) PSB_RVDC32(PSB_INT_IDENTITY_R); + rmb(); + + if (!handled) + return IRQ_NONE; + + return IRQ_HANDLED; +} + +void gma_irq_preinstall(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned long irqflags; + + spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); + + PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); + PSB_WVDC32(0x00000000, PSB_INT_MASK_R); + PSB_WVDC32(0x00000000, PSB_INT_ENABLE_R); + PSB_WSGX32(0x00000000, PSB_CR_EVENT_HOST_ENABLE); + PSB_RSGX32(PSB_CR_EVENT_HOST_ENABLE); + + if (dev->vblank[0].enabled) + dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG; + if (dev->vblank[1].enabled) + dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG; + + /* Revisit this area - want per device masks ? */ + if (dev_priv->ops->hotplug) + dev_priv->vdc_irq_mask |= _PSB_IRQ_DISP_HOTSYNC; + dev_priv->vdc_irq_mask |= _PSB_IRQ_ASLE | _PSB_IRQ_SGX_FLAG; + + /* This register is safe even if display island is off */ + PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); + spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); +} + +void gma_irq_postinstall(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned long irqflags; + unsigned int i; + + spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); + + /* Enable 2D and MMU fault interrupts */ + PSB_WSGX32(_PSB_CE2_BIF_REQUESTER_FAULT, PSB_CR_EVENT_HOST_ENABLE2); + PSB_WSGX32(_PSB_CE_TWOD_COMPLETE, PSB_CR_EVENT_HOST_ENABLE); + PSB_RSGX32(PSB_CR_EVENT_HOST_ENABLE); /* Post */ + + /* This register is safe even if display island is off */ + PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); + PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); + + for (i = 0; i < dev->num_crtcs; ++i) { + if (dev->vblank[i].enabled) + gma_enable_pipestat(dev_priv, i, PIPE_VBLANK_INTERRUPT_ENABLE); + else + gma_disable_pipestat(dev_priv, i, PIPE_VBLANK_INTERRUPT_ENABLE); + } + + if (dev_priv->ops->hotplug_enable) + dev_priv->ops->hotplug_enable(dev, true); + + spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); +} + +int gma_irq_install(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + int ret; + + if (dev_priv->use_msi && pci_enable_msi(pdev)) { + dev_warn(dev->dev, "Enabling MSI failed!\n"); + dev_priv->use_msi = false; + } + + if (pdev->irq == IRQ_NOTCONNECTED) + return -ENOTCONN; + + gma_irq_preinstall(dev); + + /* PCI devices require shared interrupts. */ + ret = request_irq(pdev->irq, gma_irq_handler, IRQF_SHARED, dev->driver->name, dev); + if (ret) + return ret; + + gma_irq_postinstall(dev); + + dev_priv->irq_enabled = true; + + return 0; +} + +void gma_irq_uninstall(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + unsigned long irqflags; + unsigned int i; + + if (!dev_priv->irq_enabled) + return; + + spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); + + if (dev_priv->ops->hotplug_enable) + dev_priv->ops->hotplug_enable(dev, false); + + PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM); + + for (i = 0; i < dev->num_crtcs; ++i) { + if (dev->vblank[i].enabled) + gma_disable_pipestat(dev_priv, i, PIPE_VBLANK_INTERRUPT_ENABLE); + } + + dev_priv->vdc_irq_mask &= _PSB_IRQ_SGX_FLAG | + _PSB_IRQ_MSVDX_FLAG | + _LNC_IRQ_TOPAZ_FLAG; + + /* These two registers are safe even if display island is off */ + PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); + PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); + + wmb(); + + /* This register is safe even if display island is off */ + PSB_WVDC32(PSB_RVDC32(PSB_INT_IDENTITY_R), PSB_INT_IDENTITY_R); + spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); + + free_irq(pdev->irq, dev); + if (dev_priv->use_msi) + pci_disable_msi(pdev); +} + +int gma_crtc_enable_vblank(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + unsigned int pipe = crtc->index; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned long irqflags; + uint32_t reg_val = 0; + uint32_t pipeconf_reg = gma_pipeconf(pipe); + + if (gma_power_begin(dev, false)) { + reg_val = REG_READ(pipeconf_reg); + gma_power_end(dev); + } + + if (!(reg_val & PIPEACONF_ENABLE)) + return -EINVAL; + + spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); + + if (pipe == 0) + dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEA_FLAG; + else if (pipe == 1) + dev_priv->vdc_irq_mask |= _PSB_VSYNC_PIPEB_FLAG; + + PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); + PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); + gma_enable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE); + + spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); + + return 0; +} + +void gma_crtc_disable_vblank(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + unsigned int pipe = crtc->index; + struct drm_psb_private *dev_priv = to_drm_psb_private(dev); + unsigned long irqflags; + + spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags); + + if (pipe == 0) + dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEA_FLAG; + else if (pipe == 1) + dev_priv->vdc_irq_mask &= ~_PSB_VSYNC_PIPEB_FLAG; + + PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R); + PSB_WVDC32(dev_priv->vdc_irq_mask, PSB_INT_ENABLE_R); + gma_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_ENABLE); + + spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); +} + +/* Called from drm generic code, passed a 'crtc', which + * we use as a pipe index + */ +u32 gma_crtc_get_vblank_counter(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + unsigned int pipe = crtc->index; + uint32_t high_frame = PIPEAFRAMEHIGH; + uint32_t low_frame = PIPEAFRAMEPIXEL; + uint32_t pipeconf_reg = PIPEACONF; + uint32_t reg_val = 0; + uint32_t high1 = 0, high2 = 0, low = 0, count = 0; + + switch (pipe) { + case 0: + break; + case 1: + high_frame = PIPEBFRAMEHIGH; + low_frame = PIPEBFRAMEPIXEL; + pipeconf_reg = PIPEBCONF; + break; + case 2: + high_frame = PIPECFRAMEHIGH; + low_frame = PIPECFRAMEPIXEL; + pipeconf_reg = PIPECCONF; + break; + default: + dev_err(dev->dev, "%s, invalid pipe.\n", __func__); + return 0; + } + + if (!gma_power_begin(dev, false)) + return 0; + + reg_val = REG_READ(pipeconf_reg); + + if (!(reg_val & PIPEACONF_ENABLE)) { + dev_err(dev->dev, "trying to get vblank count for disabled pipe %u\n", + pipe); + goto err_gma_power_end; + } + + /* + * High & low register fields aren't synchronized, so make sure + * we get a low value that's stable across two reads of the high + * register. + */ + do { + high1 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> + PIPE_FRAME_HIGH_SHIFT); + low = ((REG_READ(low_frame) & PIPE_FRAME_LOW_MASK) >> + PIPE_FRAME_LOW_SHIFT); + high2 = ((REG_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> + PIPE_FRAME_HIGH_SHIFT); + } while (high1 != high2); + + count = (high1 << 8) | low; + +err_gma_power_end: + gma_power_end(dev); + + return count; +} + diff --git a/drivers/gpu/drm/gma500/psb_irq.h b/drivers/gpu/drm/gma500/psb_irq.h new file mode 100644 index 000000000..7648f6982 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_irq.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * Copyright (c) 2009-2011, Intel Corporation. + * All Rights Reserved. + * + * Authors: + * Benjamin Defnet <benjamin.r.defnet@intel.com> + * Rajesh Poornachandran <rajesh.poornachandran@intel.com> + * + **************************************************************************/ + +#ifndef _PSB_IRQ_H_ +#define _PSB_IRQ_H_ + +struct drm_crtc; +struct drm_device; + +void gma_irq_preinstall(struct drm_device *dev); +void gma_irq_postinstall(struct drm_device *dev); +int gma_irq_install(struct drm_device *dev); +void gma_irq_uninstall(struct drm_device *dev); + +int gma_crtc_enable_vblank(struct drm_crtc *crtc); +void gma_crtc_disable_vblank(struct drm_crtc *crtc); +u32 gma_crtc_get_vblank_counter(struct drm_crtc *crtc); +void gma_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask); +void gma_disable_pipestat(struct drm_psb_private *dev_priv, int pipe, u32 mask); + +#endif /* _PSB_IRQ_H_ */ diff --git a/drivers/gpu/drm/gma500/psb_lid.c b/drivers/gpu/drm/gma500/psb_lid.c new file mode 100644 index 000000000..58a7fe392 --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_lid.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-only +/************************************************************************** + * Copyright (c) 2007, Intel Corporation. + * + * Authors: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com> + **************************************************************************/ + +#include <linux/spinlock.h> + +#include "psb_drv.h" +#include "psb_intel_reg.h" +#include "psb_reg.h" + +static void psb_lid_timer_func(struct timer_list *t) +{ + struct drm_psb_private *dev_priv = from_timer(dev_priv, t, lid_timer); + struct drm_device *dev = (struct drm_device *)&dev_priv->dev; + struct timer_list *lid_timer = &dev_priv->lid_timer; + unsigned long irq_flags; + u32 __iomem *lid_state = dev_priv->opregion.lid_state; + u32 pp_status; + + if (readl(lid_state) == dev_priv->lid_last_state) + goto lid_timer_schedule; + + if ((readl(lid_state)) & 0x01) { + /*lid state is open*/ + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0 && + (pp_status & PP_SEQUENCE_MASK) != 0); + + if (REG_READ(PP_STATUS) & PP_ON) { + /*FIXME: should be backlight level before*/ + psb_intel_lvds_set_brightness(dev, 100); + } else { + DRM_DEBUG("LVDS panel never powered up"); + return; + } + } else { + psb_intel_lvds_set_brightness(dev, 0); + + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0); + } + dev_priv->lid_last_state = readl(lid_state); + +lid_timer_schedule: + spin_lock_irqsave(&dev_priv->lid_lock, irq_flags); + if (!timer_pending(lid_timer)) { + lid_timer->expires = jiffies + PSB_LID_DELAY; + add_timer(lid_timer); + } + spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags); +} + +void psb_lid_timer_init(struct drm_psb_private *dev_priv) +{ + struct timer_list *lid_timer = &dev_priv->lid_timer; + unsigned long irq_flags; + + spin_lock_init(&dev_priv->lid_lock); + spin_lock_irqsave(&dev_priv->lid_lock, irq_flags); + + timer_setup(lid_timer, psb_lid_timer_func, 0); + + lid_timer->expires = jiffies + PSB_LID_DELAY; + + add_timer(lid_timer); + spin_unlock_irqrestore(&dev_priv->lid_lock, irq_flags); +} + +void psb_lid_timer_takedown(struct drm_psb_private *dev_priv) +{ + del_timer_sync(&dev_priv->lid_timer); +} + diff --git a/drivers/gpu/drm/gma500/psb_reg.h b/drivers/gpu/drm/gma500/psb_reg.h new file mode 100644 index 000000000..2a229a0ef --- /dev/null +++ b/drivers/gpu/drm/gma500/psb_reg.h @@ -0,0 +1,556 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/************************************************************************** + * + * Copyright (c) (2005-2007) Imagination Technologies Limited. + * Copyright (c) 2007, Intel Corporation. + * All Rights Reserved. + * + **************************************************************************/ + +#ifndef _PSB_REG_H_ +#define _PSB_REG_H_ + +#define PSB_CR_CLKGATECTL 0x0000 +#define _PSB_C_CLKGATECTL_AUTO_MAN_REG (1 << 24) +#define _PSB_C_CLKGATECTL_USE_CLKG_SHIFT (20) +#define _PSB_C_CLKGATECTL_USE_CLKG_MASK (0x3 << 20) +#define _PSB_C_CLKGATECTL_DPM_CLKG_SHIFT (16) +#define _PSB_C_CLKGATECTL_DPM_CLKG_MASK (0x3 << 16) +#define _PSB_C_CLKGATECTL_TA_CLKG_SHIFT (12) +#define _PSB_C_CLKGATECTL_TA_CLKG_MASK (0x3 << 12) +#define _PSB_C_CLKGATECTL_TSP_CLKG_SHIFT (8) +#define _PSB_C_CLKGATECTL_TSP_CLKG_MASK (0x3 << 8) +#define _PSB_C_CLKGATECTL_ISP_CLKG_SHIFT (4) +#define _PSB_C_CLKGATECTL_ISP_CLKG_MASK (0x3 << 4) +#define _PSB_C_CLKGATECTL_2D_CLKG_SHIFT (0) +#define _PSB_C_CLKGATECTL_2D_CLKG_MASK (0x3 << 0) +#define _PSB_C_CLKGATECTL_CLKG_ENABLED (0) +#define _PSB_C_CLKGATECTL_CLKG_DISABLED (1) +#define _PSB_C_CLKGATECTL_CLKG_AUTO (2) + +#define PSB_CR_CORE_ID 0x0010 +#define _PSB_CC_ID_ID_SHIFT (16) +#define _PSB_CC_ID_ID_MASK (0xFFFF << 16) +#define _PSB_CC_ID_CONFIG_SHIFT (0) +#define _PSB_CC_ID_CONFIG_MASK (0xFFFF << 0) + +#define PSB_CR_CORE_REVISION 0x0014 +#define _PSB_CC_REVISION_DESIGNER_SHIFT (24) +#define _PSB_CC_REVISION_DESIGNER_MASK (0xFF << 24) +#define _PSB_CC_REVISION_MAJOR_SHIFT (16) +#define _PSB_CC_REVISION_MAJOR_MASK (0xFF << 16) +#define _PSB_CC_REVISION_MINOR_SHIFT (8) +#define _PSB_CC_REVISION_MINOR_MASK (0xFF << 8) +#define _PSB_CC_REVISION_MAINTENANCE_SHIFT (0) +#define _PSB_CC_REVISION_MAINTENANCE_MASK (0xFF << 0) + +#define PSB_CR_DESIGNER_REV_FIELD1 0x0018 + +#define PSB_CR_SOFT_RESET 0x0080 +#define _PSB_CS_RESET_TSP_RESET (1 << 6) +#define _PSB_CS_RESET_ISP_RESET (1 << 5) +#define _PSB_CS_RESET_USE_RESET (1 << 4) +#define _PSB_CS_RESET_TA_RESET (1 << 3) +#define _PSB_CS_RESET_DPM_RESET (1 << 2) +#define _PSB_CS_RESET_TWOD_RESET (1 << 1) +#define _PSB_CS_RESET_BIF_RESET (1 << 0) + +#define PSB_CR_DESIGNER_REV_FIELD2 0x001C + +#define PSB_CR_EVENT_HOST_ENABLE2 0x0110 + +#define PSB_CR_EVENT_STATUS2 0x0118 + +#define PSB_CR_EVENT_HOST_CLEAR2 0x0114 +#define _PSB_CE2_BIF_REQUESTER_FAULT (1 << 4) + +#define PSB_CR_EVENT_STATUS 0x012C + +#define PSB_CR_EVENT_HOST_ENABLE 0x0130 + +#define PSB_CR_EVENT_HOST_CLEAR 0x0134 +#define _PSB_CE_MASTER_INTERRUPT (1 << 31) +#define _PSB_CE_TA_DPM_FAULT (1 << 28) +#define _PSB_CE_TWOD_COMPLETE (1 << 27) +#define _PSB_CE_DPM_OUT_OF_MEMORY_ZLS (1 << 25) +#define _PSB_CE_DPM_TA_MEM_FREE (1 << 24) +#define _PSB_CE_PIXELBE_END_RENDER (1 << 18) +#define _PSB_CE_SW_EVENT (1 << 14) +#define _PSB_CE_TA_FINISHED (1 << 13) +#define _PSB_CE_TA_TERMINATE (1 << 12) +#define _PSB_CE_DPM_REACHED_MEM_THRESH (1 << 3) +#define _PSB_CE_DPM_OUT_OF_MEMORY_GBL (1 << 2) +#define _PSB_CE_DPM_OUT_OF_MEMORY_MT (1 << 1) +#define _PSB_CE_DPM_3D_MEM_FREE (1 << 0) + + +#define PSB_USE_OFFSET_MASK 0x0007FFFF +#define PSB_USE_OFFSET_SIZE (PSB_USE_OFFSET_MASK + 1) +#define PSB_CR_USE_CODE_BASE0 0x0A0C +#define PSB_CR_USE_CODE_BASE1 0x0A10 +#define PSB_CR_USE_CODE_BASE2 0x0A14 +#define PSB_CR_USE_CODE_BASE3 0x0A18 +#define PSB_CR_USE_CODE_BASE4 0x0A1C +#define PSB_CR_USE_CODE_BASE5 0x0A20 +#define PSB_CR_USE_CODE_BASE6 0x0A24 +#define PSB_CR_USE_CODE_BASE7 0x0A28 +#define PSB_CR_USE_CODE_BASE8 0x0A2C +#define PSB_CR_USE_CODE_BASE9 0x0A30 +#define PSB_CR_USE_CODE_BASE10 0x0A34 +#define PSB_CR_USE_CODE_BASE11 0x0A38 +#define PSB_CR_USE_CODE_BASE12 0x0A3C +#define PSB_CR_USE_CODE_BASE13 0x0A40 +#define PSB_CR_USE_CODE_BASE14 0x0A44 +#define PSB_CR_USE_CODE_BASE15 0x0A48 +#define PSB_CR_USE_CODE_BASE(_i) (0x0A0C + ((_i) << 2)) +#define _PSB_CUC_BASE_DM_SHIFT (25) +#define _PSB_CUC_BASE_DM_MASK (0x3 << 25) +#define _PSB_CUC_BASE_ADDR_SHIFT (0) /* 1024-bit aligned address? */ +#define _PSB_CUC_BASE_ADDR_ALIGNSHIFT (7) +#define _PSB_CUC_BASE_ADDR_MASK (0x1FFFFFF << 0) +#define _PSB_CUC_DM_VERTEX (0) +#define _PSB_CUC_DM_PIXEL (1) +#define _PSB_CUC_DM_RESERVED (2) +#define _PSB_CUC_DM_EDM (3) + +#define PSB_CR_PDS_EXEC_BASE 0x0AB8 +#define _PSB_CR_PDS_EXEC_BASE_ADDR_SHIFT (20) /* 1MB aligned address */ +#define _PSB_CR_PDS_EXEC_BASE_ADDR_ALIGNSHIFT (20) + +#define PSB_CR_EVENT_KICKER 0x0AC4 +#define _PSB_CE_KICKER_ADDRESS_SHIFT (4) /* 128-bit aligned address */ + +#define PSB_CR_EVENT_KICK 0x0AC8 +#define _PSB_CE_KICK_NOW (1 << 0) + +#define PSB_CR_BIF_DIR_LIST_BASE1 0x0C38 + +#define PSB_CR_BIF_CTRL 0x0C00 +#define _PSB_CB_CTRL_CLEAR_FAULT (1 << 4) +#define _PSB_CB_CTRL_INVALDC (1 << 3) +#define _PSB_CB_CTRL_FLUSH (1 << 2) + +#define PSB_CR_BIF_INT_STAT 0x0C04 + +#define PSB_CR_BIF_FAULT 0x0C08 +#define _PSB_CBI_STAT_PF_N_RW (1 << 14) +#define _PSB_CBI_STAT_FAULT_SHIFT (0) +#define _PSB_CBI_STAT_FAULT_MASK (0x3FFF << 0) +#define _PSB_CBI_STAT_FAULT_CACHE (1 << 1) +#define _PSB_CBI_STAT_FAULT_TA (1 << 2) +#define _PSB_CBI_STAT_FAULT_VDM (1 << 3) +#define _PSB_CBI_STAT_FAULT_2D (1 << 4) +#define _PSB_CBI_STAT_FAULT_PBE (1 << 5) +#define _PSB_CBI_STAT_FAULT_TSP (1 << 6) +#define _PSB_CBI_STAT_FAULT_ISP (1 << 7) +#define _PSB_CBI_STAT_FAULT_USSEPDS (1 << 8) +#define _PSB_CBI_STAT_FAULT_HOST (1 << 9) + +#define PSB_CR_BIF_BANK0 0x0C78 +#define PSB_CR_BIF_BANK1 0x0C7C +#define PSB_CR_BIF_DIR_LIST_BASE0 0x0C84 +#define PSB_CR_BIF_TWOD_REQ_BASE 0x0C88 +#define PSB_CR_BIF_3D_REQ_BASE 0x0CAC + +#define PSB_CR_2D_SOCIF 0x0E18 +#define _PSB_C2_SOCIF_FREESPACE_SHIFT (0) +#define _PSB_C2_SOCIF_FREESPACE_MASK (0xFF << 0) +#define _PSB_C2_SOCIF_EMPTY (0x80 << 0) + +#define PSB_CR_2D_BLIT_STATUS 0x0E04 +#define _PSB_C2B_STATUS_BUSY (1 << 24) +#define _PSB_C2B_STATUS_COMPLETE_SHIFT (0) +#define _PSB_C2B_STATUS_COMPLETE_MASK (0xFFFFFF << 0) + +/* + * 2D defs. + */ + +/* + * 2D Slave Port Data : Block Header's Object Type + */ + +#define PSB_2D_CLIP_BH (0x00000000) +#define PSB_2D_PAT_BH (0x10000000) +#define PSB_2D_CTRL_BH (0x20000000) +#define PSB_2D_SRC_OFF_BH (0x30000000) +#define PSB_2D_MASK_OFF_BH (0x40000000) +#define PSB_2D_RESERVED1_BH (0x50000000) +#define PSB_2D_RESERVED2_BH (0x60000000) +#define PSB_2D_FENCE_BH (0x70000000) +#define PSB_2D_BLIT_BH (0x80000000) +#define PSB_2D_SRC_SURF_BH (0x90000000) +#define PSB_2D_DST_SURF_BH (0xA0000000) +#define PSB_2D_PAT_SURF_BH (0xB0000000) +#define PSB_2D_SRC_PAL_BH (0xC0000000) +#define PSB_2D_PAT_PAL_BH (0xD0000000) +#define PSB_2D_MASK_SURF_BH (0xE0000000) +#define PSB_2D_FLUSH_BH (0xF0000000) + +/* + * Clip Definition block (PSB_2D_CLIP_BH) + */ +#define PSB_2D_CLIPCOUNT_MAX (1) +#define PSB_2D_CLIPCOUNT_MASK (0x00000000) +#define PSB_2D_CLIPCOUNT_CLRMASK (0xFFFFFFFF) +#define PSB_2D_CLIPCOUNT_SHIFT (0) +/* clip rectangle min & max */ +#define PSB_2D_CLIP_XMAX_MASK (0x00FFF000) +#define PSB_2D_CLIP_XMAX_CLRMASK (0xFF000FFF) +#define PSB_2D_CLIP_XMAX_SHIFT (12) +#define PSB_2D_CLIP_XMIN_MASK (0x00000FFF) +#define PSB_2D_CLIP_XMIN_CLRMASK (0x00FFF000) +#define PSB_2D_CLIP_XMIN_SHIFT (0) +/* clip rectangle offset */ +#define PSB_2D_CLIP_YMAX_MASK (0x00FFF000) +#define PSB_2D_CLIP_YMAX_CLRMASK (0xFF000FFF) +#define PSB_2D_CLIP_YMAX_SHIFT (12) +#define PSB_2D_CLIP_YMIN_MASK (0x00000FFF) +#define PSB_2D_CLIP_YMIN_CLRMASK (0x00FFF000) +#define PSB_2D_CLIP_YMIN_SHIFT (0) + +/* + * Pattern Control (PSB_2D_PAT_BH) + */ +#define PSB_2D_PAT_HEIGHT_MASK (0x0000001F) +#define PSB_2D_PAT_HEIGHT_SHIFT (0) +#define PSB_2D_PAT_WIDTH_MASK (0x000003E0) +#define PSB_2D_PAT_WIDTH_SHIFT (5) +#define PSB_2D_PAT_YSTART_MASK (0x00007C00) +#define PSB_2D_PAT_YSTART_SHIFT (10) +#define PSB_2D_PAT_XSTART_MASK (0x000F8000) +#define PSB_2D_PAT_XSTART_SHIFT (15) + +/* + * 2D Control block (PSB_2D_CTRL_BH) + */ +/* Present Flags */ +#define PSB_2D_SRCCK_CTRL (0x00000001) +#define PSB_2D_DSTCK_CTRL (0x00000002) +#define PSB_2D_ALPHA_CTRL (0x00000004) +/* Colour Key Colour (SRC/DST)*/ +#define PSB_2D_CK_COL_MASK (0xFFFFFFFF) +#define PSB_2D_CK_COL_CLRMASK (0x00000000) +#define PSB_2D_CK_COL_SHIFT (0) +/* Colour Key Mask (SRC/DST)*/ +#define PSB_2D_CK_MASK_MASK (0xFFFFFFFF) +#define PSB_2D_CK_MASK_CLRMASK (0x00000000) +#define PSB_2D_CK_MASK_SHIFT (0) +/* Alpha Control (Alpha/RGB)*/ +#define PSB_2D_GBLALPHA_MASK (0x000FF000) +#define PSB_2D_GBLALPHA_CLRMASK (0xFFF00FFF) +#define PSB_2D_GBLALPHA_SHIFT (12) +#define PSB_2D_SRCALPHA_OP_MASK (0x00700000) +#define PSB_2D_SRCALPHA_OP_CLRMASK (0xFF8FFFFF) +#define PSB_2D_SRCALPHA_OP_SHIFT (20) +#define PSB_2D_SRCALPHA_OP_ONE (0x00000000) +#define PSB_2D_SRCALPHA_OP_SRC (0x00100000) +#define PSB_2D_SRCALPHA_OP_DST (0x00200000) +#define PSB_2D_SRCALPHA_OP_SG (0x00300000) +#define PSB_2D_SRCALPHA_OP_DG (0x00400000) +#define PSB_2D_SRCALPHA_OP_GBL (0x00500000) +#define PSB_2D_SRCALPHA_OP_ZERO (0x00600000) +#define PSB_2D_SRCALPHA_INVERT (0x00800000) +#define PSB_2D_SRCALPHA_INVERT_CLR (0xFF7FFFFF) +#define PSB_2D_DSTALPHA_OP_MASK (0x07000000) +#define PSB_2D_DSTALPHA_OP_CLRMASK (0xF8FFFFFF) +#define PSB_2D_DSTALPHA_OP_SHIFT (24) +#define PSB_2D_DSTALPHA_OP_ONE (0x00000000) +#define PSB_2D_DSTALPHA_OP_SRC (0x01000000) +#define PSB_2D_DSTALPHA_OP_DST (0x02000000) +#define PSB_2D_DSTALPHA_OP_SG (0x03000000) +#define PSB_2D_DSTALPHA_OP_DG (0x04000000) +#define PSB_2D_DSTALPHA_OP_GBL (0x05000000) +#define PSB_2D_DSTALPHA_OP_ZERO (0x06000000) +#define PSB_2D_DSTALPHA_INVERT (0x08000000) +#define PSB_2D_DSTALPHA_INVERT_CLR (0xF7FFFFFF) + +#define PSB_2D_PRE_MULTIPLICATION_ENABLE (0x10000000) +#define PSB_2D_PRE_MULTIPLICATION_CLRMASK (0xEFFFFFFF) +#define PSB_2D_ZERO_SOURCE_ALPHA_ENABLE (0x20000000) +#define PSB_2D_ZERO_SOURCE_ALPHA_CLRMASK (0xDFFFFFFF) + +/* + *Source Offset (PSB_2D_SRC_OFF_BH) + */ +#define PSB_2D_SRCOFF_XSTART_MASK ((0x00000FFF) << 12) +#define PSB_2D_SRCOFF_XSTART_SHIFT (12) +#define PSB_2D_SRCOFF_YSTART_MASK (0x00000FFF) +#define PSB_2D_SRCOFF_YSTART_SHIFT (0) + +/* + * Mask Offset (PSB_2D_MASK_OFF_BH) + */ +#define PSB_2D_MASKOFF_XSTART_MASK ((0x00000FFF) << 12) +#define PSB_2D_MASKOFF_XSTART_SHIFT (12) +#define PSB_2D_MASKOFF_YSTART_MASK (0x00000FFF) +#define PSB_2D_MASKOFF_YSTART_SHIFT (0) + +/* + * 2D Fence (see PSB_2D_FENCE_BH): bits 0:27 are ignored + */ + +/* + *Blit Rectangle (PSB_2D_BLIT_BH) + */ + +#define PSB_2D_ROT_MASK (3 << 25) +#define PSB_2D_ROT_CLRMASK (~PSB_2D_ROT_MASK) +#define PSB_2D_ROT_NONE (0 << 25) +#define PSB_2D_ROT_90DEGS (1 << 25) +#define PSB_2D_ROT_180DEGS (2 << 25) +#define PSB_2D_ROT_270DEGS (3 << 25) + +#define PSB_2D_COPYORDER_MASK (3 << 23) +#define PSB_2D_COPYORDER_CLRMASK (~PSB_2D_COPYORDER_MASK) +#define PSB_2D_COPYORDER_TL2BR (0 << 23) +#define PSB_2D_COPYORDER_BR2TL (1 << 23) +#define PSB_2D_COPYORDER_TR2BL (2 << 23) +#define PSB_2D_COPYORDER_BL2TR (3 << 23) + +#define PSB_2D_DSTCK_CLRMASK (0xFF9FFFFF) +#define PSB_2D_DSTCK_DISABLE (0x00000000) +#define PSB_2D_DSTCK_PASS (0x00200000) +#define PSB_2D_DSTCK_REJECT (0x00400000) + +#define PSB_2D_SRCCK_CLRMASK (0xFFE7FFFF) +#define PSB_2D_SRCCK_DISABLE (0x00000000) +#define PSB_2D_SRCCK_PASS (0x00080000) +#define PSB_2D_SRCCK_REJECT (0x00100000) + +#define PSB_2D_CLIP_ENABLE (0x00040000) + +#define PSB_2D_ALPHA_ENABLE (0x00020000) + +#define PSB_2D_PAT_CLRMASK (0xFFFEFFFF) +#define PSB_2D_PAT_MASK (0x00010000) +#define PSB_2D_USE_PAT (0x00010000) +#define PSB_2D_USE_FILL (0x00000000) +/* + * Tungsten Graphics note on rop codes: If rop A and rop B are + * identical, the mask surface will not be read and need not be + * set up. + */ + +#define PSB_2D_ROP3B_MASK (0x0000FF00) +#define PSB_2D_ROP3B_CLRMASK (0xFFFF00FF) +#define PSB_2D_ROP3B_SHIFT (8) +/* rop code A */ +#define PSB_2D_ROP3A_MASK (0x000000FF) +#define PSB_2D_ROP3A_CLRMASK (0xFFFFFF00) +#define PSB_2D_ROP3A_SHIFT (0) + +#define PSB_2D_ROP4_MASK (0x0000FFFF) +/* + * DWORD0: (Only pass if Pattern control == Use Fill Colour) + * Fill Colour RGBA8888 + */ +#define PSB_2D_FILLCOLOUR_MASK (0xFFFFFFFF) +#define PSB_2D_FILLCOLOUR_SHIFT (0) +/* + * DWORD1: (Always Present) + * X Start (Dest) + * Y Start (Dest) + */ +#define PSB_2D_DST_XSTART_MASK (0x00FFF000) +#define PSB_2D_DST_XSTART_CLRMASK (0xFF000FFF) +#define PSB_2D_DST_XSTART_SHIFT (12) +#define PSB_2D_DST_YSTART_MASK (0x00000FFF) +#define PSB_2D_DST_YSTART_CLRMASK (0xFFFFF000) +#define PSB_2D_DST_YSTART_SHIFT (0) +/* + * DWORD2: (Always Present) + * X Size (Dest) + * Y Size (Dest) + */ +#define PSB_2D_DST_XSIZE_MASK (0x00FFF000) +#define PSB_2D_DST_XSIZE_CLRMASK (0xFF000FFF) +#define PSB_2D_DST_XSIZE_SHIFT (12) +#define PSB_2D_DST_YSIZE_MASK (0x00000FFF) +#define PSB_2D_DST_YSIZE_CLRMASK (0xFFFFF000) +#define PSB_2D_DST_YSIZE_SHIFT (0) + +/* + * Source Surface (PSB_2D_SRC_SURF_BH) + */ +/* + * WORD 0 + */ + +#define PSB_2D_SRC_FORMAT_MASK (0x00078000) +#define PSB_2D_SRC_1_PAL (0x00000000) +#define PSB_2D_SRC_2_PAL (0x00008000) +#define PSB_2D_SRC_4_PAL (0x00010000) +#define PSB_2D_SRC_8_PAL (0x00018000) +#define PSB_2D_SRC_8_ALPHA (0x00020000) +#define PSB_2D_SRC_4_ALPHA (0x00028000) +#define PSB_2D_SRC_332RGB (0x00030000) +#define PSB_2D_SRC_4444ARGB (0x00038000) +#define PSB_2D_SRC_555RGB (0x00040000) +#define PSB_2D_SRC_1555ARGB (0x00048000) +#define PSB_2D_SRC_565RGB (0x00050000) +#define PSB_2D_SRC_0888ARGB (0x00058000) +#define PSB_2D_SRC_8888ARGB (0x00060000) +#define PSB_2D_SRC_8888UYVY (0x00068000) +#define PSB_2D_SRC_RESERVED (0x00070000) +#define PSB_2D_SRC_1555ARGB_LOOKUP (0x00078000) + + +#define PSB_2D_SRC_STRIDE_MASK (0x00007FFF) +#define PSB_2D_SRC_STRIDE_CLRMASK (0xFFFF8000) +#define PSB_2D_SRC_STRIDE_SHIFT (0) +/* + * WORD 1 - Base Address + */ +#define PSB_2D_SRC_ADDR_MASK (0x0FFFFFFC) +#define PSB_2D_SRC_ADDR_CLRMASK (0x00000003) +#define PSB_2D_SRC_ADDR_SHIFT (2) +#define PSB_2D_SRC_ADDR_ALIGNSHIFT (2) + +/* + * Pattern Surface (PSB_2D_PAT_SURF_BH) + */ +/* + * WORD 0 + */ + +#define PSB_2D_PAT_FORMAT_MASK (0x00078000) +#define PSB_2D_PAT_1_PAL (0x00000000) +#define PSB_2D_PAT_2_PAL (0x00008000) +#define PSB_2D_PAT_4_PAL (0x00010000) +#define PSB_2D_PAT_8_PAL (0x00018000) +#define PSB_2D_PAT_8_ALPHA (0x00020000) +#define PSB_2D_PAT_4_ALPHA (0x00028000) +#define PSB_2D_PAT_332RGB (0x00030000) +#define PSB_2D_PAT_4444ARGB (0x00038000) +#define PSB_2D_PAT_555RGB (0x00040000) +#define PSB_2D_PAT_1555ARGB (0x00048000) +#define PSB_2D_PAT_565RGB (0x00050000) +#define PSB_2D_PAT_0888ARGB (0x00058000) +#define PSB_2D_PAT_8888ARGB (0x00060000) + +#define PSB_2D_PAT_STRIDE_MASK (0x00007FFF) +#define PSB_2D_PAT_STRIDE_CLRMASK (0xFFFF8000) +#define PSB_2D_PAT_STRIDE_SHIFT (0) +/* + * WORD 1 - Base Address + */ +#define PSB_2D_PAT_ADDR_MASK (0x0FFFFFFC) +#define PSB_2D_PAT_ADDR_CLRMASK (0x00000003) +#define PSB_2D_PAT_ADDR_SHIFT (2) +#define PSB_2D_PAT_ADDR_ALIGNSHIFT (2) + +/* + * Destination Surface (PSB_2D_DST_SURF_BH) + */ +/* + * WORD 0 + */ + +#define PSB_2D_DST_FORMAT_MASK (0x00078000) +#define PSB_2D_DST_332RGB (0x00030000) +#define PSB_2D_DST_4444ARGB (0x00038000) +#define PSB_2D_DST_555RGB (0x00040000) +#define PSB_2D_DST_1555ARGB (0x00048000) +#define PSB_2D_DST_565RGB (0x00050000) +#define PSB_2D_DST_0888ARGB (0x00058000) +#define PSB_2D_DST_8888ARGB (0x00060000) +#define PSB_2D_DST_8888AYUV (0x00070000) + +#define PSB_2D_DST_STRIDE_MASK (0x00007FFF) +#define PSB_2D_DST_STRIDE_CLRMASK (0xFFFF8000) +#define PSB_2D_DST_STRIDE_SHIFT (0) +/* + * WORD 1 - Base Address + */ +#define PSB_2D_DST_ADDR_MASK (0x0FFFFFFC) +#define PSB_2D_DST_ADDR_CLRMASK (0x00000003) +#define PSB_2D_DST_ADDR_SHIFT (2) +#define PSB_2D_DST_ADDR_ALIGNSHIFT (2) + +/* + * Mask Surface (PSB_2D_MASK_SURF_BH) + */ +/* + * WORD 0 + */ +#define PSB_2D_MASK_STRIDE_MASK (0x00007FFF) +#define PSB_2D_MASK_STRIDE_CLRMASK (0xFFFF8000) +#define PSB_2D_MASK_STRIDE_SHIFT (0) +/* + * WORD 1 - Base Address + */ +#define PSB_2D_MASK_ADDR_MASK (0x0FFFFFFC) +#define PSB_2D_MASK_ADDR_CLRMASK (0x00000003) +#define PSB_2D_MASK_ADDR_SHIFT (2) +#define PSB_2D_MASK_ADDR_ALIGNSHIFT (2) + +/* + * Source Palette (PSB_2D_SRC_PAL_BH) + */ + +#define PSB_2D_SRCPAL_ADDR_SHIFT (0) +#define PSB_2D_SRCPAL_ADDR_CLRMASK (0xF0000007) +#define PSB_2D_SRCPAL_ADDR_MASK (0x0FFFFFF8) +#define PSB_2D_SRCPAL_BYTEALIGN (1024) + +/* + * Pattern Palette (PSB_2D_PAT_PAL_BH) + */ + +#define PSB_2D_PATPAL_ADDR_SHIFT (0) +#define PSB_2D_PATPAL_ADDR_CLRMASK (0xF0000007) +#define PSB_2D_PATPAL_ADDR_MASK (0x0FFFFFF8) +#define PSB_2D_PATPAL_BYTEALIGN (1024) + +/* + * Rop3 Codes (2 LS bytes) + */ + +#define PSB_2D_ROP3_SRCCOPY (0xCCCC) +#define PSB_2D_ROP3_PATCOPY (0xF0F0) +#define PSB_2D_ROP3_WHITENESS (0xFFFF) +#define PSB_2D_ROP3_BLACKNESS (0x0000) +#define PSB_2D_ROP3_SRC (0xCC) +#define PSB_2D_ROP3_PAT (0xF0) +#define PSB_2D_ROP3_DST (0xAA) + +/* + * Sizes. + */ + +#define PSB_SCENE_HW_COOKIE_SIZE 16 +#define PSB_TA_MEM_HW_COOKIE_SIZE 16 + +/* + * Scene stuff. + */ + +#define PSB_NUM_HW_SCENES 2 + +/* + * Scheduler completion actions. + */ + +#define PSB_RASTER_BLOCK 0 +#define PSB_RASTER 1 +#define PSB_RETURN 2 +#define PSB_TA 3 + +/* Power management */ +#define PSB_PUNIT_PORT 0x04 +#define PSB_OSPMBA 0x78 +#define PSB_APMBA 0x7a +#define PSB_APM_CMD 0x0 +#define PSB_APM_STS 0x04 +#define PSB_PWRGT_VID_ENC_MASK 0x30 +#define PSB_PWRGT_VID_DEC_MASK 0xc +#define PSB_PWRGT_GL3_MASK 0xc0 + +#define PSB_PM_SSC 0x20 +#define PSB_PM_SSS 0x30 +#define PSB_PWRGT_DISPLAY_MASK 0xc /*on a different BA than video/gfx*/ +/* Display SSS register bits are different in A0 vs. B0 */ +#define PSB_PWRGT_GFX_MASK 0x3 +#define PSB_PWRGT_GFX_MASK_B0 0xc3 +#endif |