diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 2386 |
1 files changed, 2386 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig new file mode 100644 index 000000000..a5143d01b --- /dev/null +++ b/drivers/hwmon/Kconfig @@ -0,0 +1,2386 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Hardware monitoring chip drivers configuration +# + +menuconfig HWMON + tristate "Hardware Monitoring support" + depends on HAS_IOMEM + default y + help + Hardware monitoring devices let you monitor the hardware health + of a system. Most modern motherboards include such a device. It + can include temperature sensors, voltage sensors, fan speed + sensors and various additional features such as the ability to + control the speed of the fans. If you want this support you + should say Y here and also to the specific driver(s) for your + sensors chip(s) below. + + To find out which specific driver(s) you need, use the + sensors-detect script from the lm_sensors package. Read + <file:Documentation/hwmon/userspace-tools.rst> for details. + + This support can also be built as a module. If so, the module + will be called hwmon. + +if HWMON + +config HWMON_VID + tristate + +config HWMON_DEBUG_CHIP + bool "Hardware Monitoring Chip debugging messages" + help + Say Y here if you want the I2C chip drivers to produce a bunch of + debug messages to the system log. Select this if you are having + a problem with I2C support and want to see more of what is going + on. + +comment "Native drivers" + +config SENSORS_ABITUGURU + tristate "Abit uGuru (rev 1 & 2)" + depends on X86 && DMI + help + If you say yes here you get support for the sensor part of the first + and second revision of the Abit uGuru chip. The voltage and frequency + control parts of the Abit uGuru are not supported. The Abit uGuru + chip can be found on Abit uGuru featuring motherboards (most modern + Abit motherboards from before end 2005). For more info and a list + of which motherboards have which revision see + Documentation/hwmon/abituguru.rst + + This driver can also be built as a module. If so, the module + will be called abituguru. + +config SENSORS_ABITUGURU3 + tristate "Abit uGuru (rev 3)" + depends on X86 && DMI + help + If you say yes here you get support for the sensor part of the + third revision of the Abit uGuru chip. Only reading the sensors + and their settings is supported. The third revision of the Abit + uGuru chip can be found on recent Abit motherboards (since end + 2005). For more info and a list of which motherboards have which + revision see Documentation/hwmon/abituguru3.rst + + This driver can also be built as a module. If so, the module + will be called abituguru3. + +config SENSORS_AD7314 + tristate "Analog Devices AD7314 and compatibles" + depends on SPI + help + If you say yes here you get support for the Analog Devices + AD7314, ADT7301 and ADT7302 temperature sensors. + + This driver can also be built as a module. If so, the module + will be called ad7314. + +config SENSORS_AD7414 + tristate "Analog Devices AD7414" + depends on I2C + help + If you say yes here you get support for the Analog Devices + AD7414 temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called ad7414. + +config SENSORS_AD7418 + tristate "Analog Devices AD7416, AD7417 and AD7418" + depends on I2C + help + If you say yes here you get support for the Analog Devices + AD7416, AD7417 and AD7418 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called ad7418. + +config SENSORS_ADM1021 + tristate "Analog Devices ADM1021 and compatibles" + depends on I2C + depends on SENSORS_LM90=n + help + If you say yes here you get support for Analog Devices ADM1021 + and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, + Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. + + This driver can also be built as a module. If so, the module + will be called adm1021. + +config SENSORS_ADM1025 + tristate "Analog Devices ADM1025 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for Analog Devices ADM1025 + and Philips NE1619 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm1025. + +config SENSORS_ADM1026 + tristate "Analog Devices ADM1026 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for Analog Devices ADM1026 + sensor chip. + + This driver can also be built as a module. If so, the module + will be called adm1026. + +config SENSORS_ADM1029 + tristate "Analog Devices ADM1029" + depends on I2C + help + If you say yes here you get support for Analog Devices ADM1029 + sensor chip. + Very rare chip, please let us know you use it. + + This driver can also be built as a module. If so, the module + will be called adm1029. + +config SENSORS_ADM1031 + tristate "Analog Devices ADM1031 and compatibles" + depends on I2C + help + If you say yes here you get support for Analog Devices ADM1031 + and ADM1030 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm1031. + +config SENSORS_ADM1177 + tristate "Analog Devices ADM1177 and compatibles" + depends on I2C + help + If you say yes here you get support for Analog Devices ADM1177 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm1177. + +config SENSORS_ADM9240 + tristate "Analog Devices ADM9240 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for Analog Devices ADM9240, + Dallas DS1780, National Semiconductor LM81 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm9240. + +config SENSORS_ADT7X10 + tristate + select REGMAP + help + This module contains common code shared by the ADT7310/ADT7320 and + ADT7410/ADT7420 temperature monitoring chip drivers. + + If built as a module, the module will be called adt7x10. + +config SENSORS_ADT7310 + tristate "Analog Devices ADT7310/ADT7320" + depends on SPI_MASTER + select SENSORS_ADT7X10 + help + If you say yes here you get support for the Analog Devices + ADT7310 and ADT7320 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7310. + +config SENSORS_ADT7410 + tristate "Analog Devices ADT7410/ADT7420" + depends on I2C + select SENSORS_ADT7X10 + help + If you say yes here you get support for the Analog Devices + ADT7410 and ADT7420 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7410. + +config SENSORS_ADT7411 + tristate "Analog Devices ADT7411" + depends on I2C + help + If you say yes here you get support for the Analog Devices + ADT7411 voltage and temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called adt7411. + +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + +config SENSORS_ADT7470 + tristate "Analog Devices ADT7470" + depends on I2C + help + If you say yes here you get support for the Analog Devices + ADT7470 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7470. + +config SENSORS_ADT7475 + tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for the Analog Devices + ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring + chips. + + This driver can also be built as a module. If so, the module + will be called adt7475. + +config SENSORS_AHT10 + tristate "Aosong AHT10" + depends on I2C + help + If you say yes here, you get support for the Aosong AHT10 + temperature and humidity sensors + + This driver can also be built as a module. If so, the module + will be called aht10. + +config SENSORS_AQUACOMPUTER_D5NEXT + tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" + depends on USB_HID + select CRC16 + help + If you say yes here you get support for sensors and fans of + the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan + controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow + Next sensor, where available. + + This driver can also be built as a module. If so, the module + will be called aquacomputer_d5next. + +config SENSORS_AS370 + tristate "Synaptics AS370 SoC hardware monitoring driver" + help + If you say yes here you get support for the PVT sensors of + the Synaptics AS370 SoC + + This driver can also be built as a module. If so, the module + will be called as370-hwmon. + + +config SENSORS_ASC7621 + tristate "Andigilog aSC7621" + depends on I2C + help + If you say yes here you get support for the aSC7621 + family of SMBus sensors chip found on most Intel X38, X48, X58, + 945, 965 and 975 desktop boards. Currently supported chips: + aSC7621 + aSC7621a + + This driver can also be built as a module. If so, the module + will be called asc7621. + +config SENSORS_AXI_FAN_CONTROL + tristate "Analog Devices FAN Control HDL Core driver" + help + If you say yes here you get support for the Analog Devices + AXI HDL FAN monitoring core. + + This driver can also be built as a module. If so, the module + will be called axi-fan-control + +config SENSORS_K8TEMP + tristate "AMD Athlon64/FX or Opteron temperature sensor" + depends on X86 && PCI + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported is whole AMD K8 + microarchitecture. Please note that you will need at least + lm-sensors 2.10.1 for proper userspace support. + + This driver can also be built as a module. If so, the module + will be called k8temp. + +config SENSORS_K10TEMP + tristate "AMD Family 10h+ temperature sensor" + depends on X86 && PCI && AMD_NB + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported are later revisions of + the AMD Family 10h and all revisions of the AMD Family 11h, + 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) + and 16h (Kabini/Mullins) microarchitectures. + + This driver can also be built as a module. If so, the module + will be called k10temp. + +config SENSORS_FAM15H_POWER + tristate "AMD Family 15h processor power" + depends on X86 && PCI && CPU_SUP_AMD + help + If you say yes here you get support for processor power + information of your AMD family 15h CPU. + + This driver can also be built as a module. If so, the module + will be called fam15h_power. + +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + help + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. + +config SENSORS_ARM_SCMI + tristate "ARM SCMI Sensors" + depends on ARM_SCMI_PROTOCOL + depends on THERMAL || !THERMAL_OF + help + This driver provides support for temperature, voltage, current + and power sensors available on SCMI based platforms. The actual + number and type of sensors exported depend on the platform. + + This driver can also be built as a module. If so, the module + will be called scmi-hwmon. + +config SENSORS_ARM_SCPI + tristate "ARM SCPI Sensors" + depends on ARM_SCPI_PROTOCOL + depends on THERMAL || !THERMAL_OF + help + This driver provides support for temperature, voltage, current + and power sensors available on ARM Ltd's SCP based platforms. The + actual number and type of sensors exported depend on the platform. + +config SENSORS_ASB100 + tristate "Asus ASB100 Bach" + depends on (X86 || COMPILE_TEST) && I2C + select HWMON_VID + help + If you say yes here you get support for the ASB100 Bach sensor + chip found on some Asus mainboards. + + This driver can also be built as a module. If so, the module + will be called asb100. + +config SENSORS_ASPEED + tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" + depends on ARCH_ASPEED || COMPILE_TEST + depends on THERMAL || THERMAL=n + select REGMAP + help + This driver provides support for ASPEED AST2400/AST2500 PWM + and Fan Tacho controllers. + + This driver can also be built as a module. If so, the module + will be called aspeed_pwm_tacho. + +config SENSORS_ATXP1 + tristate "Attansic ATXP1 VID controller" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for the Attansic ATXP1 VID + controller. + + If your board have such a chip, you are able to control your CPU + core and other voltages. + + This driver can also be built as a module. If so, the module + will be called atxp1. + +config SENSORS_BT1_PVT + tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" + depends on MIPS_BAIKAL_T1 || COMPILE_TEST + select POLYNOMIAL + help + If you say yes here you get support for Baikal-T1 PVT sensor + embedded into the SoC. + + This driver can also be built as a module. If so, the module will be + called bt1-pvt. + +config SENSORS_BT1_PVT_ALARMS + bool "Enable Baikal-T1 PVT sensor alarms" + depends on SENSORS_BT1_PVT + help + Baikal-T1 PVT IP-block provides threshold registers for each + supported sensor. But the corresponding interrupts might be + generated by the thresholds comparator only in synchronization with + a data conversion. Additionally there is only one sensor data can + be converted at a time. All of these makes the interface impossible + to be used for the hwmon alarms implementation without periodic + switch between the PVT sensors. By default the data conversion is + performed on demand from the user-space. If this config is enabled + the data conversion will be periodically performed and the data will be + saved in the internal driver cache. + +config SENSORS_CORSAIR_CPRO + tristate "Corsair Commander Pro controller" + depends on HID + help + If you say yes here you get support for the Corsair Commander Pro + controller. + + This driver can also be built as a module. If so, the module + will be called corsair-cpro. + +config SENSORS_CORSAIR_PSU + tristate "Corsair PSU HID controller" + depends on HID + help + If you say yes here you get support for Corsair PSUs with a HID + interface. + Currently this driver supports the (RM/HX)550i, (RM/HX)650i, + (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies + by Corsair. + + This driver can also be built as a module. If so, the module + will be called corsair-psu. + +config SENSORS_DRIVETEMP + tristate "Hard disk drives with temperature sensors" + depends on SCSI && ATA + help + If you say yes you get support for the temperature sensor on + hard disk drives. + + This driver can also be built as a module. If so, the module + will be called drivetemp. + +config SENSORS_DS620 + tristate "Dallas Semiconductor DS620" + depends on I2C + help + If you say yes here you get support for Dallas Semiconductor + DS620 sensor chip. + + This driver can also be built as a module. If so, the module + will be called ds620. + +config SENSORS_DS1621 + tristate "Dallas Semiconductor DS1621 and compatibles" + depends on I2C + help + If you say yes here you get support for Dallas Semiconductor/Maxim + Integrated DS1621 sensor chips and compatible models including: + + - Dallas Semiconductor DS1625 + - Maxim Integrated DS1631 + - Maxim Integrated DS1721 + - Maxim Integrated DS1731 + + This driver can also be built as a module. If so, the module + will be called ds1621. + +config SENSORS_DELL_SMM + tristate "Dell laptop SMM BIOS hwmon driver" + depends on X86 + imply THERMAL + help + This hwmon driver adds support for reporting temperature of different + sensors and controls the fans on Dell laptops via System Management + Mode provided by Dell BIOS. + + When option I8K is also enabled this driver provides legacy /proc/i8k + userspace interface for i8kutils package. + +config I8K + bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" + depends on SENSORS_DELL_SMM + depends on PROC_FS + help + This option enables the legacy /proc/i8k userspace interface of the + dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS + version, temperatures and allows control of fan speeds of some Dell + laptops. Sometimes it also reports power and hotkey status. + + This interface is required to run programs from the i8kutils package. + + Say Y if you intend to run userspace programs that use this interface. + Say N otherwise. + +config SENSORS_DA9052_ADC + tristate "Dialog DA9052/DA9053 ADC" + depends on PMIC_DA9052 + help + Say y here to support the ADC found on Dialog Semiconductor + DA9052-BC and DA9053-AA/Bx PMICs. + + This driver can also be built as module. If so, the module + will be called da9052-hwmon. + +config SENSORS_DA9055 + tristate "Dialog Semiconductor DA9055 ADC" + depends on MFD_DA9055 + help + If you say yes here you get support for ADC on the Dialog + Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055-hwmon. + +config SENSORS_I5K_AMB + tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" + depends on PCI + help + If you say yes here you get support for FB-DIMM AMB temperature + monitoring chips on systems with the Intel 5000 series chipset. + + This driver can also be built as a module. If so, the module + will be called i5k_amb. + +config SENSORS_SPARX5 + tristate "Sparx5 SoC temperature sensor" + depends on ARCH_SPARX5 || COMPILE_TEST + help + If you say yes here you get support for temperature monitoring + with the Microchip Sparx5 SoC. + + This driver can also be built as a module. If so, the module + will be called sparx5-temp. + +config SENSORS_F71805F + tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" + depends on !PPC + help + If you say yes here you get support for hardware monitoring + features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG + Super-I/O chips. + + This driver can also be built as a module. If so, the module + will be called f71805f. + +config SENSORS_F71882FG + tristate "Fintek F71882FG and compatibles" + depends on !PPC + help + If you say yes here you get support for hardware monitoring + features of many Fintek Super-I/O (LPC) chips. The currently + supported chips are: + F71808E/A + F71858FG + F71862FG + F71863FG + F71869F/E/A + F71882FG + F71883FG + F71889FG/ED/A + F8000 + F81801U + F81865F + + This driver can also be built as a module. If so, the module + will be called f71882fg. + +config SENSORS_F75375S + tristate "Fintek F75375S/SP, F75373 and F75387" + depends on I2C + help + If you say yes here you get support for hardware monitoring + features of the Fintek F75375S/SP, F75373 and F75387 + + This driver can also be built as a module. If so, the module + will be called f75375s. + +config SENSORS_GSC + tristate "Gateworks System Controller ADC" + depends on MFD_GATEWORKS_GSC + help + Support for the Gateworks System Controller A/D converters. + + To compile this driver as a module, choose M here: + the module will be called gsc-hwmon. + +config SENSORS_MC13783_ADC + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX + help + Support for the A/D converter on MC13783 and MC13892 PMIC. + +config SENSORS_FSCHMD + tristate "Fujitsu Siemens Computers sensor chips" + depends on (X86 || COMPILE_TEST) && I2C + help + If you say yes here you get support for the following Fujitsu + Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, + Heimdall, Heracles, Hades and Syleus including support for the + integrated watchdog. + + This is a merged driver for FSC sensor chips replacing the fscpos, + fscscy and fscher drivers and adding support for several other FSC + sensor chips. + + This driver can also be built as a module. If so, the module + will be called fschmd. + +config SENSORS_FTSTEUTATES + tristate "Fujitsu Technology Solutions sensor chip Teutates" + depends on I2C && WATCHDOG + select WATCHDOG_CORE + help + If you say yes here you get support for the Fujitsu Technology + Solutions (FTS) sensor chip "Teutates" including support for + the integrated watchdog. + + This driver can also be built as a module. If so, the module + will be called ftsteutates. + +config SENSORS_GL518SM + tristate "Genesys Logic GL518SM" + depends on I2C + help + If you say yes here you get support for Genesys Logic GL518SM + sensor chips. + + This driver can also be built as a module. If so, the module + will be called gl518sm. + +config SENSORS_GL520SM + tristate "Genesys Logic GL520SM" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for Genesys Logic GL520SM + sensor chips. + + This driver can also be built as a module. If so, the module + will be called gl520sm. + +config SENSORS_G760A + tristate "GMT G760A" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G760A fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g760a. + +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + +config SENSORS_GPIO_FAN + tristate "GPIO fan" + depends on OF_GPIO + depends on GPIOLIB || COMPILE_TEST + depends on THERMAL || THERMAL=n + help + If you say yes here you get support for fans connected to GPIO lines. + + This driver can also be built as a module. If so, the module + will be called gpio-fan. + +config SENSORS_HIH6130 + tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" + depends on I2C + help + If you say yes here you get support for Honeywell Humidicon + HIH-6130 and HIH-6131 Humidicon humidity sensors. + + This driver can also be built as a module. If so, the module + will be called hih6130. + +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HC10/HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. + +config SENSORS_IBMPEX + tristate "IBM PowerExecutive temperature/power sensors" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors in various IBM System X servers that support + PowerExecutive. So far this includes the x3350, x3550, x3650, + x3655, and x3755; the x3800, x3850, and x3950 models that have + PCI Express; and some of the HS2x, LS2x, and QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmpex. + +config SENSORS_IBMPOWERNV + tristate "IBM POWERNV platform sensors" + depends on PPC_POWERNV + default y + help + If you say yes here you get support for the temperature/fan/power + sensors on your PowerNV platform. + + This driver can also be built as a module. If so, the module + will be called ibmpowernv. + +config SENSORS_IIO_HWMON + tristate "Hwmon driver that uses channels specified via iio maps" + depends on IIO + help + This is a platform driver that in combination with a suitable + map allows IIO devices to provide basic hwmon functionality + for those channels specified in the map. This map can be provided + either via platform data or the device tree bindings. + +config SENSORS_I5500 + tristate "Intel 5500/5520/X58 temperature sensor" + depends on X86 && PCI + help + If you say yes here you get support for the temperature + sensor inside the Intel 5500, 5520 and X58 chipsets. + + This driver can also be built as a module. If so, the module + will be called i5500_temp. + +config SENSORS_CORETEMP + tristate "Intel Core/Core2/Atom temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check Documentation/hwmon/coretemp.rst for details. + +config SENSORS_IT87 + tristate "ITE IT87xx and compatibles" + depends on !PPC + select HWMON_VID + help + If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, + IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, + IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, + IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 + clone. + + This driver can also be built as a module. If so, the module + will be called it87. + +config SENSORS_JC42 + tristate "JEDEC JC42.4 compliant memory module temperature sensors" + depends on I2C + select REGMAP_I2C + help + If you say yes here, you get support for JEDEC JC42.4 compliant + temperature sensors, which are used on many DDR3 memory modules for + mobile devices and servers. Support will include, but not be limited + to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, + MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, + STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. + + This driver can also be built as a module. If so, the module + will be called jc42. + +config SENSORS_POWR1220 + tristate "Lattice POWR1220 Power Monitoring" + depends on I2C + help + If you say yes here you get access to the hardware monitoring + functions of the Lattice POWR1220 isp Power Supply Monitoring, + Sequencing and Margining Controller. + + This driver can also be built as a module. If so, the module + will be called powr1220. + +config SENSORS_LAN966X + tristate "Microchip LAN966x Hardware Monitoring" + depends on SOC_LAN966 || COMPILE_TEST + select REGMAP + select POLYNOMIAL + help + If you say yes here you get support for temperature monitoring + on the Microchip LAN966x SoC. + + This driver can also be built as a module. If so, the module + will be called lan966x-hwmon. + +config SENSORS_LINEAGE + tristate "Lineage Compact Power Line Power Entry Module" + depends on I2C + help + If you say yes here you get support for the Lineage Compact Power Line + series of DC/DC and AC/DC converters such as CP1800, CP2000AC, + CP2000DC, CP2725, and others. + + This driver can also be built as a module. If so, the module + will be called lineage-pem. + +config SENSORS_LOCHNAGAR + tristate "Lochnagar Hardware Monitor" + depends on MFD_LOCHNAGAR + help + If you say yes here you get support for Lochnagar 2 temperature, + voltage and current sensors abilities. + + This driver can also be built as a module. If so, the module + will be called lochnagar-hwmon. + +config SENSORS_LTC2945 + tristate "Linear Technology LTC2945" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Linear Technology LTC2945 + I2C System Monitor. + + This driver can also be built as a module. If so, the module will + be called ltc2945. + +config SENSORS_LTC2947 + tristate + +config SENSORS_LTC2947_I2C + tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" + depends on I2C + select REGMAP_I2C + select SENSORS_LTC2947 + help + If you say yes here you get support for Linear Technology LTC2947 + I2C High Precision Power and Energy Monitor + + This driver can also be built as a module. If so, the module will + be called ltc2947-i2c. + +config SENSORS_LTC2947_SPI + tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" + depends on SPI_MASTER + select REGMAP_SPI + select SENSORS_LTC2947 + help + If you say yes here you get support for Linear Technology LTC2947 + SPI High Precision Power and Energy Monitor + + This driver can also be built as a module. If so, the module will + be called ltc2947-spi. + +config SENSORS_LTC2990 + tristate "Linear Technology LTC2990" + depends on I2C + help + If you say yes here you get support for Linear Technology LTC2990 + I2C System Monitor. The LTC2990 supports a combination of voltage, + current and temperature monitoring. + + This driver can also be built as a module. If so, the module will + be called ltc2990. + +config SENSORS_LTC2992 + tristate "Linear Technology LTC2992" + depends on I2C + depends on GPIOLIB + help + If you say yes here you get support for Linear Technology LTC2992 + I2C System Monitor. The LTC2992 measures current, voltage, and + power of two supplies. + + This driver can also be built as a module. If so, the module will + be called ltc2992. + +config SENSORS_LTC4151 + tristate "Linear Technology LTC4151" + depends on I2C + help + If you say yes here you get support for Linear Technology LTC4151 + High Voltage I2C Current and Voltage Monitor interface. + + This driver can also be built as a module. If so, the module will + be called ltc4151. + +config SENSORS_LTC4215 + tristate "Linear Technology LTC4215" + depends on I2C + help + If you say yes here you get support for Linear Technology LTC4215 + Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4215. + +config SENSORS_LTC4222 + tristate "Linear Technology LTC4222" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Linear Technology LTC4222 + Dual Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4222. + +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + +config SENSORS_LTC4260 + tristate "Linear Technology LTC4260" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Linear Technology LTC4260 + Positive Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4260. + +config SENSORS_LTC4261 + tristate "Linear Technology LTC4261" + depends on I2C + help + If you say yes here you get support for Linear Technology LTC4261 + Negative Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4261. + +config SENSORS_LTQ_CPUTEMP + bool "Lantiq cpu temperature sensor driver" + depends on SOC_XWAY + help + If you say yes here you get support for the temperature + sensor inside your CPU. + +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 + ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + +config SENSORS_MAX127 + tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" + depends on I2C + help + Say y here to support Maxim's MAX127 DAS chips. + + This driver can also be built as a module. If so, the module + will be called max127. + +config SENSORS_MAX16065 + tristate "Maxim MAX16065 System Manager and compatibles" + depends on I2C + help + If you say yes here you get support for hardware monitoring + capabilities of the following Maxim System Manager chips. + MAX16065 + MAX16066 + MAX16067 + MAX16068 + MAX16070 + MAX16071 + + This driver can also be built as a module. If so, the module + will be called max16065. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_MAX1668 + tristate "Maxim MAX1668 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX1668, MAX1989 and + MAX1805 chips. + + This driver can also be built as a module. If so, the module + will be called max1668. + +config SENSORS_MAX197 + tristate "Maxim MAX197 and compatibles" + help + Support for the Maxim MAX197 A/D converter. + Support will include, but not be limited to, MAX197, and MAX199. + + This driver can also be built as a module. If so, the module + will be called max197. + +config SENSORS_MAX31722 + tristate "MAX31722 temperature sensor" + depends on SPI + help + Support for the Maxim Integrated MAX31722/MAX31723 digital + thermometers/thermostats operating over an SPI interface. + + This driver can also be built as a module. If so, the module + will be called max31722. + +config SENSORS_MAX31730 + tristate "MAX31730 temperature sensor" + depends on I2C + help + Support for the Maxim Integrated MAX31730 3-Channel Remote + Temperature Sensor. + + This driver can also be built as a module. If so, the module + will be called max31730. + +config SENSORS_MAX31760 + tristate "MAX31760 fan speed controller" + depends on I2C + select REGMAP_I2C + help + Support for the Analog Devices MAX31760 Precision Fan-Speed + Controller. MAX31760 integrates temperature sensing along with + precision PWM fan control. + + This driver can also be built as a module. If so, the module + will be called max31760. + +config SENSORS_MAX6620 + tristate "Maxim MAX6620 fan controller" + depends on I2C + help + If you say yes here you get support for the MAX6620 + fan controller. + + This driver can also be built as a module. If so, the module + will be called max6620. + +config SENSORS_MAX6621 + tristate "Maxim MAX6621 sensor chip" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for MAX6621 sensor chip. + MAX6621 is a PECI-to-I2C translator provides an efficient, + low-cost solution for PECI-to-SMBus/I2C protocol conversion. + It allows reading the temperature from the PECI-compliant + host directly from up to four PECI-enabled CPUs. + + This driver can also be built as a module. If so, the module + will be called max6621. + +config SENSORS_MAX6639 + tristate "Maxim MAX6639 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6639 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6639. + +config SENSORS_MAX6642 + tristate "Maxim MAX6642 sensor chip" + depends on I2C + depends on SENSORS_LM90=n + help + If you say yes here you get support for MAX6642 sensor chip. + MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor + with Overtemperature Alarm from Maxim. + + This driver can also be built as a module. If so, the module + will be called max6642. + +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C + depends on THERMAL || THERMAL=n + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + +config SENSORS_MAX6697 + tristate "Maxim MAX6697 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX6581, MAX6602, MAX6622, + MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6697. + +config SENSORS_MAX31790 + tristate "Maxim MAX31790 sensor chip" + depends on I2C + help + If you say yes here you get support for 6-Channel PWM-Output + Fan RPM Controller. + + This driver can also be built as a module. If so, the module + will be called max31790. + +config SENSORS_MCP3021 + tristate "Microchip MCP3021 and compatibles" + depends on I2C + help + If you say yes here you get support for MCP3021 and MCP3221. + The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 + with 12-bit resolution. + + This driver can also be built as a module. If so, the module + will be called mcp3021. + +config SENSORS_MLXREG_FAN + tristate "Mellanox FAN driver" + depends on MELLANOX_PLATFORM + imply THERMAL + select REGMAP + help + This option enables support for the FAN control on the Mellanox + Ethernet and InfiniBand switches. The driver can be activated by the + platform device add call. Say Y to enable these. To compile this + driver as a module, choose 'M' here: the module will be called + mlxreg-fan. + +config SENSORS_TC654 + tristate "Microchip TC654/TC655 and compatibles" + depends on I2C + help + If you say yes here you get support for TC654 and TC655. + The TC654 and TC655 are PWM mode fan speed controllers with + FanSense technology for use with brushless DC fans. + + This driver can also be built as a module. If so, the module + will be called tc654. + +config SENSORS_TPS23861 + tristate "Texas Instruments TPS23861 PoE PSE" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments + TPS23861 802.3at PoE PSE chips. + + This driver can also be built as a module. If so, the module + will be called tps23861. + +config SENSORS_MENF21BMC_HWMON + tristate "MEN 14F021P00 BMC Hardware Monitoring" + depends on MFD_MENF21BMC + help + Say Y here to include support for the MEN 14F021P00 BMC + hardware monitoring. + + This driver can also be built as a module. If so the module + will be called menf21bmc_hwmon. + +config SENSORS_MR75203 + tristate "Moortec Semiconductor MR75203 PVT Controller" + select REGMAP_MMIO + help + If you say yes here you get support for Moortec MR75203 + PVT controller. + + This driver can also be built as a module. If so, the module + will be called mr75203. + +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER + help + If you say yes here you get support for the National Semiconductor + ADC<bb><c>S<sss> chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + +config SENSORS_LM63 + tristate "National Semiconductor LM63 and compatibles" + depends on I2C + help + If you say yes here you get support for the National + Semiconductor LM63, LM64, and LM96163 remote diode digital temperature + sensors with integrated fan control. Such chips are found + on the Tyan S4882 (Thunder K8QS Pro) motherboard, among + others. + + This driver can also be built as a module. If so, the module + will be called lm63. + +config SENSORS_LM70 + tristate "National Semiconductor LM70 and compatibles" + depends on SPI_MASTER + help + If you say yes here you get support for the National Semiconductor + LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, + TMP125 digital temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm70. + +config SENSORS_LM73 + tristate "National Semiconductor LM73" + depends on I2C + help + If you say yes here you get support for National Semiconductor LM73 + sensor chips. + This driver can also be built as a module. If so, the module + will be called lm73. + +config SENSORS_LM75 + tristate "National Semiconductor LM75 and compatibles" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for one common type of + temperature sensor chip, with models including: + + - Analog Devices ADT75 + - Atmel (now Microchip) AT30TS74 + - Dallas Semiconductor DS75, DS1775 and DS7505 + - Global Mixed-mode Technology (GMT) G751 + - Maxim MAX6625 and MAX6626 + - Microchip MCP980x + - National Semiconductor LM75, LM75A + - NXP's LM75A + - ST Microelectronics STDS75 + - ST Microelectronics STLM75 + - TelCom (now Microchip) TCN75 + - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, + TMP175, TMP275 + + This driver supports driver model based binding through board + specific I2C device tables. + + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. + + This driver can also be built as a module. If so, the module + will be called lm75. + +config SENSORS_LM77 + tristate "National Semiconductor LM77" + depends on I2C + help + If you say yes here you get support for National Semiconductor LM77 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm77. + +config SENSORS_LM78 + tristate "National Semiconductor LM78 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for National Semiconductor LM78, + LM78-J and LM79. + + This driver can also be built as a module. If so, the module + will be called lm78. + +config SENSORS_LM80 + tristate "National Semiconductor LM80 and LM96080" + depends on I2C + help + If you say yes here you get support for National Semiconductor + LM80 and LM96080 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm80. + +config SENSORS_LM83 + tristate "National Semiconductor LM83 and compatibles" + depends on I2C + select REGMAP + help + If you say yes here you get support for National Semiconductor + LM82 and LM83 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm83. + +config SENSORS_LM85 + tristate "National Semiconductor LM85 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for National Semiconductor LM85 + sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, + EMC6D101, EMC6D102, and EMC6D103. + + This driver can also be built as a module. If so, the module + will be called lm85. + +config SENSORS_LM87 + tristate "National Semiconductor LM87 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for National Semiconductor LM87 + and Analog Devices ADM1024 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm87. + +config SENSORS_LM90 + tristate "National Semiconductor LM90 and compatibles" + depends on I2C + help + If you say yes here you get support for National Semiconductor LM84, + LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, + ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, + Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, + MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, + MAX6696, + ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, + Winbond/Nuvoton W83L771W/G/AWG/ASG, + Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm90. + +config SENSORS_LM92 + tristate "National Semiconductor LM92 and compatibles" + depends on I2C + help + If you say yes here you get support for National Semiconductor LM92 + and Maxim MAX6635 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm92. + +config SENSORS_LM93 + tristate "National Semiconductor LM93 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for National Semiconductor LM93, + LM94, and compatible sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm93. + +config SENSORS_LM95234 + tristate "National Semiconductor LM95234 and compatibles" + depends on I2C + help + If you say yes here you get support for the LM95233 and LM95234 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm95234. + +config SENSORS_LM95241 + tristate "National Semiconductor LM95241 and compatibles" + depends on I2C + help + If you say yes here you get support for LM95231 and LM95241 sensor + chips. + + This driver can also be built as a module. If so, the module + will be called lm95241. + +config SENSORS_LM95245 + tristate "National Semiconductor LM95245 and compatibles" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for LM95235 and LM95245 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm95245. + +config SENSORS_PC87360 + tristate "National Semiconductor PC87360 family" + depends on !PPC + select HWMON_VID + help + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC8736x Super-I/O chips. + The PC87360, PC87363 and PC87364 only have fan monitoring and + control. The PC87365 and PC87366 additionally have voltage and + temperature monitoring. + + This driver can also be built as a module. If so, the module + will be called pc87360. + +config SENSORS_PC87427 + tristate "National Semiconductor PC87427" + depends on !PPC + help + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC87427 Super-I/O chip. + The chip has two distinct logical devices, one for fan speed + monitoring and control, and one for voltage and temperature + monitoring. Fan speed monitoring and control are supported, as + well as temperature monitoring. Voltages aren't supported yet. + + This driver can also be built as a module. If so, the module + will be called pc87427. + +config SENSORS_NTC_THERMISTOR + tristate "NTC thermistor support" + depends on IIO + depends on THERMAL || !THERMAL_OF + help + This driver supports NTC thermistors sensor reading and its + interpretation. The driver can also monitor the temperature and + send notifications about the temperature. + + Currently, this driver supports + NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, + NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and + B57891S0103 from EPCOS. + + This driver can also be built as a module. If so, the module + will be called ntc-thermistor. + +config SENSORS_NCT6683 + tristate "Nuvoton NCT6683D" + depends on !PPC + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6683D eSIO chip. + + This driver can also be built as a module. If so, the module + will be called nct6683. + +config SENSORS_NCT6775_CORE + tristate + select REGMAP + help + This module contains common code shared by the platform and + i2c versions of the nct6775 driver; it is not useful on its + own. + + If built as a module, the module will be called + nct6775-core. + +config SENSORS_NCT6775 + tristate "Platform driver for Nuvoton NCT6775F and compatibles" + depends on !PPC + depends on ACPI || ACPI=n + select HWMON_VID + select SENSORS_NCT6775_CORE + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, + NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible + Super-I/O chips. This driver replaces the w83627ehf driver for + NCT6775F and NCT6776F. + + This driver can also be built as a module. If so, the module + will be called nct6775. + +config SENSORS_NCT6775_I2C + tristate "I2C driver for Nuvoton NCT6775F and compatibles" + depends on I2C + select REGMAP_I2C + select SENSORS_NCT6775_CORE + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, + NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible + Super-I/O chips via their I2C interface. + + If you're not building a kernel for a BMC, this is probably + not the driver you want (see CONFIG_SENSORS_NCT6775). + + This driver can also be built as a module. If so, the module + will be called nct6775-i2c. + +config SENSORS_NCT7802 + tristate "Nuvoton NCT7802Y" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Nuvoton NCT7802Y + hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called nct7802. + +config SENSORS_NCT7904 + tristate "Nuvoton NCT7904" + depends on I2C && WATCHDOG + select WATCHDOG_CORE + help + If you say yes here you get support for the Nuvoton NCT7904 + hardware monitoring chip, including manual fan speed control + and support for the integrated watchdog. + + This driver can also be built as a module. If so, the module + will be called nct7904. + +config SENSORS_NPCM7XX + tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" + imply THERMAL + help + This driver provides support for Nuvoton NPCM750/730/715/705 PWM + and Fan controllers. + + This driver can also be built as a module. If so, the module + will be called npcm750-pwm-fan. + +config SENSORS_NSA320 + tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" + depends on GPIOLIB && OF + depends on MACH_KIRKWOOD || COMPILE_TEST + help + If you say yes here you get support for hardware monitoring + for the ZyXEL NSA320 Media Server and other compatible devices + (probably the NSA325 and some NSA310 variants). + + The sensor data is taken from a Holtek HT46R065 microcontroller + connected to GPIO lines. + + This driver can also be built as a module. If so, the module + will be called nsa320-hwmon. + +config SENSORS_NZXT_KRAKEN2 + tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called nzxt-kraken2. + +config SENSORS_NZXT_SMART2 + tristate "NZXT RGB & Fan Controller/Smart Device v2" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT RGB & Fan Controller/Smart Device v2. + + This driver can also be built as a module. If so, the module + will be called nzxt-smart2. + +source "drivers/hwmon/occ/Kconfig" + +config SENSORS_PCF8591 + tristate "Philips PCF8591 ADC/DAC" + depends on I2C + help + If you say yes here you get support for Philips PCF8591 4-channel + ADC, 1-channel DAC chips. + + This driver can also be built as a module. If so, the module + will be called pcf8591. + + These devices are hard to detect and rarely found on mainstream + hardware. If unsure, say N. + +source "drivers/hwmon/peci/Kconfig" + +source "drivers/hwmon/pmbus/Kconfig" + +config SENSORS_PWM_FAN + tristate "PWM fan" + depends on (PWM && OF) || COMPILE_TEST + depends on THERMAL || THERMAL=n + help + If you say yes here you get support for fans connected to PWM lines. + The driver uses the generic PWM interface, thus it will work on a + variety of SoCs. + + This driver can also be built as a module. If so, the module + will be called pwm-fan. + +config SENSORS_RASPBERRYPI_HWMON + tristate "Raspberry Pi voltage monitor" + depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) + help + If you say yes here you get support for voltage sensor on the + Raspberry Pi. + + This driver can also be built as a module. If so, the module + will be called raspberrypi-hwmon. + +config SENSORS_SL28CPLD + tristate "Kontron sl28cpld hardware monitoring driver" + depends on MFD_SL28CPLD || COMPILE_TEST + help + If you say yes here you get support for the fan supervisor of the + sl28cpld board management controller. + + This driver can also be built as a module. If so, the module + will be called sl28cpld-hwmon. + +config SENSORS_SBTSI + tristate "Emulated SB-TSI temperature sensor" + depends on I2C + help + If you say yes here you get support for emulated temperature + sensors on AMD SoCs with SB-TSI interface connected to a BMC device. + + This driver can also be built as a module. If so, the module will + be called sbtsi_temp. + +config SENSORS_SBRMI + tristate "Emulated SB-RMI sensor" + depends on I2C + help + If you say yes here you get support for emulated RMI + sensors on AMD SoCs with APML interface connected to a BMC device. + + This driver can also be built as a module. If so, the module will + be called sbrmi. + +config SENSORS_SHT15 + tristate "Sensiron humidity and temperature sensors. SHT15 and compat." + depends on GPIOLIB || COMPILE_TEST + select BITREVERSE + help + If you say yes here you get support for the Sensiron SHT10, SHT11, + SHT15, SHT71, SHT75 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht15. + +config SENSORS_SHT21 + tristate "Sensiron humidity and temperature sensors. SHT21 and compat." + depends on I2C + help + If you say yes here you get support for the Sensiron SHT21, SHT25 + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht21. + +config SENSORS_SHT3x + tristate "Sensiron humidity and temperature sensors. SHT3x and compat." + depends on I2C + select CRC8 + help + If you say yes here you get support for the Sensiron SHT30 and SHT31 + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht3x. + +config SENSORS_SHT4x + tristate "Sensiron humidity and temperature sensors. SHT4x and compat." + depends on I2C + select CRC8 + help + If you say yes here you get support for the Sensiron SHT40, SHT41 and + SHT45 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht4x. + +config SENSORS_SHTC1 + tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." + depends on I2C + help + If you say yes here you get support for the Sensiron SHTC1, SHTW1, + and SHTC3 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called shtc1. + +config SENSORS_S3C + tristate "Samsung built-in ADC" + depends on S3C_ADC + help + If you say yes here you get support for the on-board ADCs of + the Samsung S3C24XX, S3C64XX and other series of SoC + + This driver can also be built as a module. If so, the module + will be called s3c-hwmon. + +config SENSORS_S3C_RAW + bool "Include raw channel attributes in sysfs" + depends on SENSORS_S3C + help + Say Y here if you want to include raw copies of all the ADC + channels in sysfs. + +config SENSORS_SIS5595 + tristate "Silicon Integrated Systems Corp. SiS5595" + depends on PCI + help + If you say yes here you get support for the integrated sensors in + SiS5595 South Bridges. + + This driver can also be built as a module. If so, the module + will be called sis5595. + +config SENSORS_SY7636A + tristate "Silergy SY7636A" + depends on MFD_SY7636A + help + If you say yes here you get support for the thermistor readout of + the Silergy SY7636A PMIC. + + This driver can also be built as a module. If so, the module + will be called sy7636a-hwmon. + +config SENSORS_DME1737 + tristate "SMSC DME1737, SCH311x and compatibles" + depends on I2C && !PPC + select HWMON_VID + help + If you say yes here you get support for the hardware monitoring + and fan control features of the SMSC DME1737, SCH311x, SCH5027, and + Asus A8000 Super-I/O chips. + + This driver can also be built as a module. If so, the module + will be called dme1737. + +config SENSORS_EMC1403 + tristate "SMSC EMC1403/23 thermal sensor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the SMSC EMC1403/23 + temperature monitoring chip. + + Threshold values can be configured using sysfs. + Data from the different diodes are accessible via sysfs. + +config SENSORS_EMC2103 + tristate "SMSC EMC2103" + depends on I2C + help + If you say yes here you get support for the temperature + and fan sensors of the SMSC EMC2103 chips. + + This driver can also be built as a module. If so, the module + will be called emc2103. + +config SENSORS_EMC2305 + tristate "Microchip EMC2305 and compatible EMC2301/2/3" + depends on I2C + imply THERMAL + help + If you say yes here you get support for the Microchip EMC2305 + fan controller chips. + The Microchip EMC2305 is a fan controller for up to 5 fans. + Fan rotation speeds are reported in RPM. + + This driver can also be built as a module. If so, the module + will be called emc2305. + +config SENSORS_EMC6W201 + tristate "SMSC EMC6W201" + depends on I2C + help + If you say yes here you get support for the SMSC EMC6W201 + hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called emc6w201. + +config SENSORS_SMSC47M1 + tristate "SMSC LPC47M10x and compatibles" + depends on !PPC + help + If you say yes here you get support for the integrated fan + monitoring and control capabilities of the SMSC LPC47B27x, + LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, + LPC47M192, LPC47M292 and LPC47M997 chips. + + The temperature and voltage sensor features of the LPC47M15x, + LPC47M192, LPC47M292 and LPC47M997 are supported by another + driver, select also "SMSC LPC47M192 and compatibles" below for + those. + + This driver can also be built as a module. If so, the module + will be called smsc47m1. + +config SENSORS_SMSC47M192 + tristate "SMSC LPC47M192 and compatibles" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for the temperature and + voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 + and LPC47M997 chips. + + The fan monitoring and control capabilities of these chips + are supported by another driver, select + "SMSC LPC47M10x and compatibles" above. You need both drivers + if you want fan control and voltage/temperature sensor support. + + This driver can also be built as a module. If so, the module + will be called smsc47m192. + +config SENSORS_SMSC47B397 + tristate "SMSC LPC47B397-NC" + depends on !PPC + help + If you say yes here you get support for the SMSC LPC47B397-NC + sensor chip. + + This driver can also be built as a module. If so, the module + will be called smsc47b397. + +config SENSORS_SCH56XX_COMMON + tristate + +config SENSORS_SCH5627 + tristate "SMSC SCH5627" + depends on !PPC && WATCHDOG + select SENSORS_SCH56XX_COMMON + select WATCHDOG_CORE + help + If you say yes here you get support for the hardware monitoring + features of the SMSC SCH5627 Super-I/O chip including support for + the integrated watchdog. + + This driver can also be built as a module. If so, the module + will be called sch5627. + +config SENSORS_SCH5636 + tristate "SMSC SCH5636" + depends on !PPC && WATCHDOG + select SENSORS_SCH56XX_COMMON + select WATCHDOG_CORE + help + SMSC SCH5636 Super I/O chips include an embedded microcontroller for + hardware monitoring solutions, allowing motherboard manufacturers to + create their own custom hwmon solution based upon the SCH5636. + + Currently this driver only supports the Fujitsu Theseus SCH5636 based + hwmon solution. Say yes here if you want support for the Fujitsu + Theseus' hardware monitoring features including support for the + integrated watchdog. + + This driver can also be built as a module. If so, the module + will be called sch5636. + +config SENSORS_STTS751 + tristate "ST Microelectronics STTS751" + depends on I2C + help + If you say yes here you get support for STTS751 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called stts751. + +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + +config SENSORS_ADC128D818 + tristate "Texas Instruments ADC128D818" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + ADC128D818 System Monitor with Temperature Sensor chip. + + This driver can also be built as a module. If so, the module + will be called adc128d818. + +config SENSORS_ADS7828 + tristate "Texas Instruments ADS7828 and compatibles" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments ADS7828 and + ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while + it is 8-bit on ADS7830. + + This driver can also be built as a module. If so, the module + will be called ads7828. + +config SENSORS_ADS7871 + tristate "Texas Instruments ADS7871 A/D converter" + depends on SPI + help + If you say yes here you get support for TI ADS7871 & ADS7870 + + This driver can also be built as a module. If so, the module + will be called ads7871. + +config SENSORS_AMC6821 + tristate "Texas Instruments AMC6821" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + AMC6821 hardware monitoring chips. + + This driver can also be built as a module. If so, the module + will be called amc6821. + +config SENSORS_INA209 + tristate "TI / Burr Brown INA209" + depends on I2C + help + If you say yes here you get support for the TI / Burr Brown INA209 + voltage / current / power monitor I2C interface. + + This driver can also be built as a module. If so, the module will + be called ina209. + +config SENSORS_INA2XX + tristate "Texas Instruments INA219 and compatibles" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for INA219, INA220, INA226, + INA230, and INA231 power monitor chips. + + The INA2xx driver is configured for the default configuration of + the part as described in the datasheet. + Default value for Rshunt is 10 mOhms. + This driver can also be built as a module. If so, the module + will be called ina2xx. + +config SENSORS_INA238 + tristate "Texas Instruments INA238" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the INA238 power monitor + chip. This driver supports voltage, current, power and temperature + measurements as well as alarm configuration. + + This driver can also be built as a module. If so, the module + will be called ina238. + +config SENSORS_INA3221 + tristate "Texas Instruments INA3221 Triple Power Monitor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the TI INA3221 Triple Power + Monitor. + + This driver can also be built as a module. If so, the module + will be called ina3221. + +config SENSORS_TC74 + tristate "Microchip TC74" + depends on I2C + help + If you say yes here you get support for Microchip TC74 single + input temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tc74. + +config SENSORS_THMC50 + tristate "Texas Instruments THMC50 / Analog Devices ADM1022" + depends on I2C + help + If you say yes here you get support for Texas Instruments THMC50 + sensor chips and clones: the Analog Devices ADM1022. + + This driver can also be built as a module. If so, the module + will be called thmc50. + +config SENSORS_TMP102 + tristate "Texas Instruments TMP102" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments TMP102 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp102. + +config SENSORS_TMP103 + tristate "Texas Instruments TMP103" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments TMP103 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp103. + +config SENSORS_TMP108 + tristate "Texas Instruments TMP108" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments TMP108 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp108. + +config SENSORS_TMP401 + tristate "Texas Instruments TMP401 and compatibles" + depends on I2C + select REGMAP + help + If you say yes here you get support for Texas Instruments TMP401, + TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp401. + +config SENSORS_TMP421 + tristate "Texas Instruments TMP421 and compatible" + depends on I2C + help + If you say yes here you get support for Texas Instruments TMP421, + TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp421. + +config SENSORS_TMP464 + tristate "Texas Instruments TMP464 and compatible" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments TMP464 + and TMP468 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp464. + +config SENSORS_TMP513 + tristate "Texas Instruments TMP513 and compatibles" + depends on I2C + help + If you say yes here you get support for Texas Instruments TMP512, + and TMP513 temperature and power supply sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp513. + +config SENSORS_VEXPRESS + tristate "Versatile Express" + depends on VEXPRESS_CONFIG + help + This driver provides support for hardware sensors available on + the ARM Ltd's Versatile Express platform. It can provide wide + range of information like temperature, power, energy. + +config SENSORS_VIA_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + select HWMON_VID + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the VIA C7 and Nano. + +config SENSORS_VIA686A + tristate "VIA686A" + depends on PCI + help + If you say yes here you get support for the integrated sensors in + Via 686A/B South Bridges. + + This driver can also be built as a module. If so, the module + will be called via686a. + +config SENSORS_VT1211 + tristate "VIA VT1211" + depends on !PPC + select HWMON_VID + help + If you say yes here then you get support for hardware monitoring + features of the VIA VT1211 Super-I/O chip. + + This driver can also be built as a module. If so, the module + will be called vt1211. + +config SENSORS_VT8231 + tristate "VIA VT8231" + depends on PCI + select HWMON_VID + help + If you say yes here then you get support for the integrated sensors + in the VIA VT8231 device. + + This driver can also be built as a module. If so, the module + will be called vt8231. + +config SENSORS_W83773G + tristate "Nuvoton W83773G" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Nuvoton W83773G hardware + monitoring chip. + + This driver can also be built as a module. If so, the module + will be called w83773g. + +config SENSORS_W83781D + tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for the Winbond W8378x series + of sensor chips: the W83781D, W83782D and W83783S, and the similar + Asus AS99127F. + + This driver can also be built as a module. If so, the module + will be called w83781d. + +config SENSORS_W83791D + tristate "Winbond W83791D" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for the Winbond W83791D chip. + + This driver can also be built as a module. If so, the module + will be called w83791d. + +config SENSORS_W83792D + tristate "Winbond W83792D" + depends on I2C + help + If you say yes here you get support for the Winbond W83792D chip. + + This driver can also be built as a module. If so, the module + will be called w83792d. + +config SENSORS_W83793 + tristate "Winbond W83793" + depends on I2C + select HWMON_VID + help + If you say yes here you get support for the Winbond W83793 + hardware monitoring chip, including support for the integrated + watchdog. + + This driver can also be built as a module. If so, the module + will be called w83793. + +config SENSORS_W83795 + tristate "Winbond/Nuvoton W83795G/ADG" + depends on I2C + help + If you say yes here you get support for the Winbond W83795G and + W83795ADG hardware monitoring chip, including manual fan speed + control. + + This driver can also be built as a module. If so, the module + will be called w83795. + +config SENSORS_W83795_FANCTRL + bool "Include automatic fan control support" + depends on SENSORS_W83795 + help + If you say yes here, support for automatic fan speed control + will be included in the driver. + + Please also note that this option will create sysfs attribute + files which may change in the future, so you shouldn't rely + on them being stable. + +config SENSORS_W83L785TS + tristate "Winbond W83L785TS-S" + depends on I2C + help + If you say yes here you get support for the Winbond W83L785TS-S + sensor chip, which is used on the Asus A7N8X, among other + motherboards. + + This driver can also be built as a module. If so, the module + will be called w83l785ts. + +config SENSORS_W83L786NG + tristate "Winbond W83L786NG, W83L786NR" + depends on I2C + help + If you say yes here you get support for the Winbond W83L786NG + and W83L786NR sensor chips. + + This driver can also be built as a module. If so, the module + will be called w83l786ng. + +config SENSORS_W83627HF + tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on !PPC + select HWMON_VID + help + If you say yes here you get support for the Winbond W836X7 series + of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and + W83697HF. + + This driver can also be built as a module. If so, the module + will be called w83627hf. + +config SENSORS_W83627EHF + tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" + depends on !PPC + select HWMON_VID + help + If you say yes here you get support for the hardware + monitoring functionality of the Winbond W83627EHF Super-I/O chip. + + This driver also supports the W83627EHG, which is the lead-free + version of the W83627EHF, and the W83627DHG, which is a similar + chip suited for specific Intel processors that use PECI such as + the Core 2 Duo. And also the W83627UHG, which is a stripped down + version of the W83627DHG (as far as hardware monitoring goes.) + + This driver also supports Nuvoton W83667HG and W83667HG-B. + + This driver can also be built as a module. If so, the module + will be called w83627ehf. + +config SENSORS_WM831X + tristate "WM831x PMICs" + depends on MFD_WM831X + help + If you say yes here you get support for the hardware + monitoring functionality of the Wolfson Microelectronics + WM831x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm831x-hwmon. + +config SENSORS_WM8350 + tristate "Wolfson Microelectronics WM835x" + depends on MFD_WM8350 + help + If you say yes here you get support for the hardware + monitoring features of the WM835x series of PMICs. + + This driver can also be built as a module. If so, the module + will be called wm8350-hwmon. + +config SENSORS_ULTRA45 + tristate "Sun Ultra45 PIC16F747" + depends on SPARC64 + help + This driver provides support for the Ultra45 workstation environmental + sensors. + +config SENSORS_XGENE + tristate "APM X-Gene SoC hardware monitoring driver" + depends on XGENE_SLIMPRO_MBOX || PCC + help + If you say yes here you get support for the temperature + and power sensors for APM X-Gene SoC. + +config SENSORS_INTEL_M10_BMC_HWMON + tristate "Intel MAX10 BMC Hardware Monitoring" + depends on MFD_INTEL_M10_BMC + help + This driver provides support for the hardware monitoring functionality + on Intel MAX10 BMC chip. + + This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its + sensors monitor various telemetry data of different components on the + card, e.g. board temperature, FPGA core temperature/voltage/current. + +if ACPI + +comment "ACPI drivers" + +config SENSORS_ACPI_POWER + tristate "ACPI 4.0 power meter" + help + This driver exposes ACPI 4.0 power meters as hardware monitoring + devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware + and a power meter. + + To compile this driver as a module, choose M here: + the module will be called acpi_power_meter. + +config SENSORS_ATK0110 + tristate "ASUS ATK0110" + depends on X86 + help + If you say yes here you get support for the ACPI hardware + monitoring interface found in many ASUS motherboards. This + driver will provide readings of fans, voltages and temperatures + through the system firmware. + + This driver can also be built as a module. If so, the module + will be called asus_atk0110. + +config SENSORS_ASUS_WMI + tristate "ASUS WMI X370/X470/B450/X399" + depends on ACPI_WMI + help + If you say yes here you get support for the ACPI hardware monitoring + interface found in X370/X470/B450/X399 ASUS motherboards. This driver + will provide readings of fans, voltages and temperatures through the system + firmware. + + This driver can also be built as a module. If so, the module + will be called asus_wmi_sensors. + +config SENSORS_ASUS_EC + tristate "ASUS EC Sensors" + depends on X86 + help + If you say yes here you get support for the ACPI embedded controller + hardware monitoring interface found in ASUS motherboards. The driver + currently supports B550/X570 boards, although other ASUS boards might + provide this monitoring interface as well. + + This driver can also be built as a module. If so, the module + will be called asus_ec_sensors. + +endif # ACPI + +endif # HWMON |