summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/adt7475.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/adt7475.c')
-rw-r--r--drivers/hwmon/adt7475.c2022
1 files changed, 2022 insertions, 0 deletions
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
new file mode 100644
index 000000000..6a6ebcc89
--- /dev/null
+++ b/drivers/hwmon/adt7475.c
@@ -0,0 +1,2022 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives
+ * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
+ * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2009 Jean Delvare <jdelvare@suse.de>
+ *
+ * Derived from the lm83 driver by Jean Delvare
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/util_macros.h>
+
+/* Indexes for the sysfs hooks */
+
+#define INPUT 0
+#define MIN 1
+#define MAX 2
+#define CONTROL 3
+#define OFFSET 3
+#define AUTOMIN 4
+#define THERM 5
+#define HYSTERSIS 6
+
+/*
+ * These are unique identifiers for the sysfs functions - unlike the
+ * numbers above, these are not also indexes into an array
+ */
+
+#define ALARM 9
+#define FAULT 10
+
+/* 7475 Common Registers */
+
+#define REG_DEVREV2 0x12 /* ADT7490 only */
+
+#define REG_VTT 0x1E /* ADT7490 only */
+#define REG_EXTEND3 0x1F /* ADT7490 only */
+
+#define REG_VOLTAGE_BASE 0x20
+#define REG_TEMP_BASE 0x25
+#define REG_TACH_BASE 0x28
+#define REG_PWM_BASE 0x30
+#define REG_PWM_MAX_BASE 0x38
+
+#define REG_DEVID 0x3D
+#define REG_VENDID 0x3E
+#define REG_DEVID2 0x3F
+
+#define REG_CONFIG1 0x40
+
+#define REG_STATUS1 0x41
+#define REG_STATUS2 0x42
+
+#define REG_VID 0x43 /* ADT7476 only */
+
+#define REG_VOLTAGE_MIN_BASE 0x44
+#define REG_VOLTAGE_MAX_BASE 0x45
+
+#define REG_TEMP_MIN_BASE 0x4E
+#define REG_TEMP_MAX_BASE 0x4F
+
+#define REG_TACH_MIN_BASE 0x54
+
+#define REG_PWM_CONFIG_BASE 0x5C
+
+#define REG_TEMP_TRANGE_BASE 0x5F
+
+#define REG_ENHANCE_ACOUSTICS1 0x62
+#define REG_ENHANCE_ACOUSTICS2 0x63
+
+#define REG_PWM_MIN_BASE 0x64
+
+#define REG_TEMP_TMIN_BASE 0x67
+#define REG_TEMP_THERM_BASE 0x6A
+
+#define REG_REMOTE1_HYSTERSIS 0x6D
+#define REG_REMOTE2_HYSTERSIS 0x6E
+
+#define REG_TEMP_OFFSET_BASE 0x70
+
+#define REG_CONFIG2 0x73
+
+#define REG_EXTEND1 0x76
+#define REG_EXTEND2 0x77
+
+#define REG_CONFIG3 0x78
+#define REG_CONFIG5 0x7C
+#define REG_CONFIG4 0x7D
+
+#define REG_STATUS4 0x81 /* ADT7490 only */
+
+#define REG_VTT_MIN 0x84 /* ADT7490 only */
+#define REG_VTT_MAX 0x86 /* ADT7490 only */
+
+#define VID_VIDSEL 0x80 /* ADT7476 only */
+
+#define CONFIG2_ATTN 0x20
+
+#define CONFIG3_SMBALERT 0x01
+#define CONFIG3_THERM 0x02
+
+#define CONFIG4_PINFUNC 0x03
+#define CONFIG4_THERM 0x01
+#define CONFIG4_SMBALERT 0x02
+#define CONFIG4_MAXDUTY 0x08
+#define CONFIG4_ATTN_IN10 0x30
+#define CONFIG4_ATTN_IN43 0xC0
+
+#define CONFIG5_TWOSCOMP 0x01
+#define CONFIG5_TEMPOFFSET 0x02
+#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */
+
+/* ADT7475 Settings */
+
+#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */
+#define ADT7475_TEMP_COUNT 3
+#define ADT7475_TACH_COUNT 4
+#define ADT7475_PWM_COUNT 3
+
+/* Macro to read the registers */
+
+#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg))
+
+/* Macros to easily index the registers */
+
+#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
+#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))
+
+#define PWM_REG(idx) (REG_PWM_BASE + (idx))
+#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
+#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
+#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))
+
+#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
+#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
+#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))
+
+#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
+#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
+#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
+#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
+#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
+#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
+#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
+
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+
+enum chips { adt7473, adt7475, adt7476, adt7490 };
+
+static const struct i2c_device_id adt7475_id[] = {
+ { "adt7473", adt7473 },
+ { "adt7475", adt7475 },
+ { "adt7476", adt7476 },
+ { "adt7490", adt7490 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7475_id);
+
+static const struct of_device_id __maybe_unused adt7475_of_match[] = {
+ {
+ .compatible = "adi,adt7473",
+ .data = (void *)adt7473
+ },
+ {
+ .compatible = "adi,adt7475",
+ .data = (void *)adt7475
+ },
+ {
+ .compatible = "adi,adt7476",
+ .data = (void *)adt7476
+ },
+ {
+ .compatible = "adi,adt7490",
+ .data = (void *)adt7490
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, adt7475_of_match);
+
+struct adt7475_data {
+ struct i2c_client *client;
+ struct mutex lock;
+
+ unsigned long measure_updated;
+ bool valid;
+
+ u8 config2;
+ u8 config4;
+ u8 config5;
+ u8 has_voltage;
+ u8 bypass_attn; /* Bypass voltage attenuator */
+ u8 has_pwm2:1;
+ u8 has_fan4:1;
+ u8 has_vid:1;
+ u32 alarms;
+ u16 voltage[3][6];
+ u16 temp[7][3];
+ u16 tach[2][4];
+ u8 pwm[4][3];
+ u8 range[3];
+ u8 pwmctl[3];
+ u8 pwmchan[3];
+ u8 enh_acoustics[2];
+
+ u8 vid;
+ u8 vrm;
+ const struct attribute_group *groups[9];
+};
+
+static struct i2c_driver adt7475_driver;
+static struct adt7475_data *adt7475_update_device(struct device *dev);
+static void adt7475_read_hystersis(struct i2c_client *client);
+static void adt7475_read_pwm(struct i2c_client *client, int index);
+
+/* Given a temp value, convert it to register value */
+
+static inline u16 temp2reg(struct adt7475_data *data, long val)
+{
+ u16 ret;
+
+ if (!(data->config5 & CONFIG5_TWOSCOMP)) {
+ val = clamp_val(val, -64000, 191000);
+ ret = (val + 64500) / 1000;
+ } else {
+ val = clamp_val(val, -128000, 127000);
+ if (val < -500)
+ ret = (256500 + val) / 1000;
+ else
+ ret = (val + 500) / 1000;
+ }
+
+ return ret << 2;
+}
+
+/* Given a register value, convert it to a real temp value */
+
+static inline int reg2temp(struct adt7475_data *data, u16 reg)
+{
+ if (data->config5 & CONFIG5_TWOSCOMP) {
+ if (reg >= 512)
+ return (reg - 1024) * 250;
+ else
+ return reg * 250;
+ } else
+ return (reg - 256) * 250;
+}
+
+static inline int tach2rpm(u16 tach)
+{
+ if (tach == 0 || tach == 0xFFFF)
+ return 0;
+
+ return (90000 * 60) / tach;
+}
+
+static inline u16 rpm2tach(unsigned long rpm)
+{
+ if (rpm == 0)
+ return 0;
+
+ return clamp_val((90000 * 60) / rpm, 1, 0xFFFF);
+}
+
+/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */
+static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
+ { 45, 94 }, /* +2.5V */
+ { 175, 525 }, /* Vccp */
+ { 68, 71 }, /* Vcc */
+ { 93, 47 }, /* +5V */
+ { 120, 20 }, /* +12V */
+ { 45, 45 }, /* Vtt */
+};
+
+static inline int reg2volt(int channel, u16 reg, u8 bypass_attn)
+{
+ const int *r = adt7473_in_scaling[channel];
+
+ if (bypass_attn & (1 << channel))
+ return DIV_ROUND_CLOSEST(reg * 2250, 1024);
+ return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
+}
+
+static inline u16 volt2reg(int channel, long volt, u8 bypass_attn)
+{
+ const int *r = adt7473_in_scaling[channel];
+ long reg;
+
+ if (bypass_attn & (1 << channel))
+ reg = DIV_ROUND_CLOSEST(volt * 1024, 2250);
+ else
+ reg = DIV_ROUND_CLOSEST(volt * r[1] * 1024,
+ (r[0] + r[1]) * 2250);
+ return clamp_val(reg, 0, 1023) & (0xff << 2);
+}
+
+static int adt7475_read_word(struct i2c_client *client, int reg)
+{
+ int val1, val2;
+
+ val1 = i2c_smbus_read_byte_data(client, reg);
+ if (val1 < 0)
+ return val1;
+ val2 = i2c_smbus_read_byte_data(client, reg + 1);
+ if (val2 < 0)
+ return val2;
+
+ return val1 | (val2 << 8);
+}
+
+static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
+{
+ i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
+ i2c_smbus_write_byte_data(client, reg, val & 0xFF);
+}
+
+static ssize_t voltage_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ unsigned short val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ switch (sattr->nr) {
+ case ALARM:
+ return sprintf(buf, "%d\n",
+ (data->alarms >> sattr->index) & 1);
+ default:
+ val = data->voltage[sattr->nr][sattr->index];
+ return sprintf(buf, "%d\n",
+ reg2volt(sattr->index, val, data->bypass_attn));
+ }
+}
+
+static ssize_t voltage_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ unsigned char reg;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ data->voltage[sattr->nr][sattr->index] =
+ volt2reg(sattr->index, val, data->bypass_attn);
+
+ if (sattr->index < ADT7475_VOLTAGE_COUNT) {
+ if (sattr->nr == MIN)
+ reg = VOLTAGE_MIN_REG(sattr->index);
+ else
+ reg = VOLTAGE_MAX_REG(sattr->index);
+ } else {
+ if (sattr->nr == MIN)
+ reg = REG_VTT_MIN;
+ else
+ reg = REG_VTT_MAX;
+ }
+
+ i2c_smbus_write_byte_data(client, reg,
+ data->voltage[sattr->nr][sattr->index] >> 2);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int out;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ switch (sattr->nr) {
+ case HYSTERSIS:
+ mutex_lock(&data->lock);
+ out = data->temp[sattr->nr][sattr->index];
+ if (sattr->index != 1)
+ out = (out >> 4) & 0xF;
+ else
+ out = (out & 0xF);
+ /*
+ * Show the value as an absolute number tied to
+ * THERM
+ */
+ out = reg2temp(data, data->temp[THERM][sattr->index]) -
+ out * 1000;
+ mutex_unlock(&data->lock);
+ break;
+
+ case OFFSET:
+ /*
+ * Offset is always 2's complement, regardless of the
+ * setting in CONFIG5
+ */
+ mutex_lock(&data->lock);
+ out = (s8)data->temp[sattr->nr][sattr->index];
+ if (data->config5 & CONFIG5_TEMPOFFSET)
+ out *= 1000;
+ else
+ out *= 500;
+ mutex_unlock(&data->lock);
+ break;
+
+ case ALARM:
+ out = (data->alarms >> (sattr->index + 4)) & 1;
+ break;
+
+ case FAULT:
+ /* Note - only for remote1 and remote2 */
+ out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000));
+ break;
+
+ default:
+ /* All other temp values are in the configured format */
+ out = reg2temp(data, data->temp[sattr->nr][sattr->index]);
+ }
+
+ return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t temp_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ unsigned char reg = 0;
+ u8 out;
+ int temp;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ /* We need the config register in all cases for temp <-> reg conv. */
+ data->config5 = adt7475_read(REG_CONFIG5);
+
+ switch (sattr->nr) {
+ case OFFSET:
+ if (data->config5 & CONFIG5_TEMPOFFSET) {
+ val = clamp_val(val, -63000, 127000);
+ out = data->temp[OFFSET][sattr->index] = val / 1000;
+ } else {
+ val = clamp_val(val, -63000, 64000);
+ out = data->temp[OFFSET][sattr->index] = val / 500;
+ }
+ break;
+
+ case HYSTERSIS:
+ /*
+ * The value will be given as an absolute value, turn it
+ * into an offset based on THERM
+ */
+
+ /* Read fresh THERM and HYSTERSIS values from the chip */
+ data->temp[THERM][sattr->index] =
+ adt7475_read(TEMP_THERM_REG(sattr->index)) << 2;
+ adt7475_read_hystersis(client);
+
+ temp = reg2temp(data, data->temp[THERM][sattr->index]);
+ val = clamp_val(val, temp - 15000, temp);
+ val = (temp - val) / 1000;
+
+ if (sattr->index != 1) {
+ data->temp[HYSTERSIS][sattr->index] &= 0x0F;
+ data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4;
+ } else {
+ data->temp[HYSTERSIS][sattr->index] &= 0xF0;
+ data->temp[HYSTERSIS][sattr->index] |= (val & 0xF);
+ }
+
+ out = data->temp[HYSTERSIS][sattr->index];
+ break;
+
+ default:
+ data->temp[sattr->nr][sattr->index] = temp2reg(data, val);
+
+ /*
+ * We maintain an extra 2 digits of precision for simplicity
+ * - shift those back off before writing the value
+ */
+ out = (u8) (data->temp[sattr->nr][sattr->index] >> 2);
+ }
+
+ switch (sattr->nr) {
+ case MIN:
+ reg = TEMP_MIN_REG(sattr->index);
+ break;
+ case MAX:
+ reg = TEMP_MAX_REG(sattr->index);
+ break;
+ case OFFSET:
+ reg = TEMP_OFFSET_REG(sattr->index);
+ break;
+ case AUTOMIN:
+ reg = TEMP_TMIN_REG(sattr->index);
+ break;
+ case THERM:
+ reg = TEMP_THERM_REG(sattr->index);
+ break;
+ case HYSTERSIS:
+ if (sattr->index != 2)
+ reg = REG_REMOTE1_HYSTERSIS;
+ else
+ reg = REG_REMOTE2_HYSTERSIS;
+
+ break;
+ }
+
+ i2c_smbus_write_byte_data(client, reg, out);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+/* Assuming CONFIG6[SLOW] is 0 */
+static const int ad7475_st_map[] = {
+ 37500, 18800, 12500, 7500, 4700, 3100, 1600, 800,
+};
+
+static ssize_t temp_st_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ long val;
+
+ switch (sattr->index) {
+ case 0:
+ val = data->enh_acoustics[0] & 0xf;
+ break;
+ case 1:
+ val = data->enh_acoustics[1] & 0xf;
+ break;
+ case 2:
+ default:
+ val = (data->enh_acoustics[1] >> 4) & 0xf;
+ break;
+ }
+
+ if (val & 0x8)
+ return sprintf(buf, "%d\n", ad7475_st_map[val & 0x7]);
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t temp_st_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ unsigned char reg;
+ int shift, idx;
+ ulong val;
+
+ if (kstrtoul(buf, 10, &val))
+ return -EINVAL;
+
+ switch (sattr->index) {
+ case 0:
+ reg = REG_ENHANCE_ACOUSTICS1;
+ shift = 0;
+ idx = 0;
+ break;
+ case 1:
+ reg = REG_ENHANCE_ACOUSTICS2;
+ shift = 0;
+ idx = 1;
+ break;
+ case 2:
+ default:
+ reg = REG_ENHANCE_ACOUSTICS2;
+ shift = 4;
+ idx = 1;
+ break;
+ }
+
+ if (val > 0) {
+ val = find_closest_descending(val, ad7475_st_map,
+ ARRAY_SIZE(ad7475_st_map));
+ val |= 0x8;
+ }
+
+ mutex_lock(&data->lock);
+
+ data->enh_acoustics[idx] &= ~(0xf << shift);
+ data->enh_acoustics[idx] |= (val << shift);
+
+ i2c_smbus_write_byte_data(client, reg, data->enh_acoustics[idx]);
+
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+/*
+ * Table of autorange values - the user will write the value in millidegrees,
+ * and we'll convert it
+ */
+static const int autorange_table[] = {
+ 2000, 2500, 3330, 4000, 5000, 6670, 8000,
+ 10000, 13330, 16000, 20000, 26670, 32000, 40000,
+ 53330, 80000
+};
+
+static ssize_t point2_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int out, val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ mutex_lock(&data->lock);
+ out = (data->range[sattr->index] >> 4) & 0x0F;
+ val = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+ mutex_unlock(&data->lock);
+
+ return sprintf(buf, "%d\n", val + autorange_table[out]);
+}
+
+static ssize_t point2_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int temp;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ /* Get a fresh copy of the needed registers */
+ data->config5 = adt7475_read(REG_CONFIG5);
+ data->temp[AUTOMIN][sattr->index] =
+ adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2;
+ data->range[sattr->index] =
+ adt7475_read(TEMP_TRANGE_REG(sattr->index));
+
+ /*
+ * The user will write an absolute value, so subtract the start point
+ * to figure the range
+ */
+ temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+ val = clamp_val(val, temp + autorange_table[0],
+ temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
+ val -= temp;
+
+ /* Find the nearest table entry to what the user wrote */
+ val = find_closest(val, autorange_table, ARRAY_SIZE(autorange_table));
+
+ data->range[sattr->index] &= ~0xF0;
+ data->range[sattr->index] |= val << 4;
+
+ i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+ data->range[sattr->index]);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+static ssize_t tach_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int out;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ if (sattr->nr == ALARM)
+ out = (data->alarms >> (sattr->index + 10)) & 1;
+ else
+ out = tach2rpm(data->tach[sattr->nr][sattr->index]);
+
+ return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t tach_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ data->tach[MIN][sattr->index] = rpm2tach(val);
+
+ adt7475_write_word(client, TACH_MIN_REG(sattr->index),
+ data->tach[MIN][sattr->index]);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]);
+}
+
+static ssize_t pwmchan_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", data->pwmchan[sattr->index]);
+}
+
+static ssize_t pwmctrl_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", data->pwmctl[sattr->index]);
+}
+
+static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ unsigned char reg = 0;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ switch (sattr->nr) {
+ case INPUT:
+ /* Get a fresh value for CONTROL */
+ data->pwm[CONTROL][sattr->index] =
+ adt7475_read(PWM_CONFIG_REG(sattr->index));
+
+ /*
+ * If we are not in manual mode, then we shouldn't allow
+ * the user to set the pwm speed
+ */
+ if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) {
+ mutex_unlock(&data->lock);
+ return count;
+ }
+
+ reg = PWM_REG(sattr->index);
+ break;
+
+ case MIN:
+ reg = PWM_MIN_REG(sattr->index);
+ break;
+
+ case MAX:
+ reg = PWM_MAX_REG(sattr->index);
+ break;
+ }
+
+ data->pwm[sattr->nr][sattr->index] = clamp_val(val, 0, 0xFF);
+ i2c_smbus_write_byte_data(client, reg,
+ data->pwm[sattr->nr][sattr->index]);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t stall_disable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+
+ u8 mask = BIT(5 + sattr->index);
+
+ return sprintf(buf, "%d\n", !!(data->enh_acoustics[0] & mask));
+}
+
+static ssize_t stall_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ long val;
+ u8 mask = BIT(5 + sattr->index);
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ data->enh_acoustics[0] &= ~mask;
+ if (val)
+ data->enh_acoustics[0] |= mask;
+
+ i2c_smbus_write_byte_data(client, REG_ENHANCE_ACOUSTICS1,
+ data->enh_acoustics[0]);
+
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+/* Called by set_pwmctrl and set_pwmchan */
+
+static int hw_set_pwm(struct i2c_client *client, int index,
+ unsigned int pwmctl, unsigned int pwmchan)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ long val = 0;
+
+ switch (pwmctl) {
+ case 0:
+ val = 0x03; /* Run at full speed */
+ break;
+ case 1:
+ val = 0x07; /* Manual mode */
+ break;
+ case 2:
+ switch (pwmchan) {
+ case 1:
+ /* Remote1 controls PWM */
+ val = 0x00;
+ break;
+ case 2:
+ /* local controls PWM */
+ val = 0x01;
+ break;
+ case 4:
+ /* remote2 controls PWM */
+ val = 0x02;
+ break;
+ case 6:
+ /* local/remote2 control PWM */
+ val = 0x05;
+ break;
+ case 7:
+ /* All three control PWM */
+ val = 0x06;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ data->pwmctl[index] = pwmctl;
+ data->pwmchan[index] = pwmchan;
+
+ data->pwm[CONTROL][index] &= ~0xE0;
+ data->pwm[CONTROL][index] |= (val & 7) << 5;
+
+ i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+ data->pwm[CONTROL][index]);
+
+ return 0;
+}
+
+static ssize_t pwmchan_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int r;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ /* Read Modify Write PWM values */
+ adt7475_read_pwm(client, sattr->index);
+ r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val);
+ if (r)
+ count = r;
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t pwmctrl_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int r;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ /* Read Modify Write PWM values */
+ adt7475_read_pwm(client, sattr->index);
+ r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]);
+ if (r)
+ count = r;
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+/* List of frequencies for the PWM */
+static const int pwmfreq_table[] = {
+ 11, 14, 22, 29, 35, 44, 58, 88, 22500
+};
+
+static ssize_t pwmfreq_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int idx;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+ idx = clamp_val(data->range[sattr->index] & 0xf, 0,
+ ARRAY_SIZE(pwmfreq_table) - 1);
+
+ return sprintf(buf, "%d\n", pwmfreq_table[idx]);
+}
+
+static ssize_t pwmfreq_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int out;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+
+ out = find_closest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
+
+ mutex_lock(&data->lock);
+
+ data->range[sattr->index] =
+ adt7475_read(TEMP_TRANGE_REG(sattr->index));
+ data->range[sattr->index] &= ~0xf;
+ data->range[sattr->index] |= out;
+
+ i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+ data->range[sattr->index]);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+static ssize_t pwm_use_point2_pwm_at_crit_show(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY));
+}
+
+static ssize_t pwm_use_point2_pwm_at_crit_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4);
+ if (val)
+ data->config4 |= CONFIG4_MAXDUTY;
+ else
+ data->config4 &= ~CONFIG4_MAXDUTY;
+ i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t vrm_show(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", (int)data->vrm);
+}
+
+static ssize_t vrm_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (kstrtol(buf, 10, &val))
+ return -EINVAL;
+ if (val < 0 || val > 255)
+ return -EINVAL;
+ data->vrm = val;
+
+ return count;
+}
+
+static ssize_t cpu0_vid_show(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static SENSOR_DEVICE_ATTR_2_RO(in0_input, voltage, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2_RW(in0_max, voltage, MAX, 0);
+static SENSOR_DEVICE_ATTR_2_RW(in0_min, voltage, MIN, 0);
+static SENSOR_DEVICE_ATTR_2_RO(in0_alarm, voltage, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2_RO(in1_input, voltage, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2_RW(in1_max, voltage, MAX, 1);
+static SENSOR_DEVICE_ATTR_2_RW(in1_min, voltage, MIN, 1);
+static SENSOR_DEVICE_ATTR_2_RO(in1_alarm, voltage, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2_RO(in2_input, voltage, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2_RW(in2_max, voltage, MAX, 2);
+static SENSOR_DEVICE_ATTR_2_RW(in2_min, voltage, MIN, 2);
+static SENSOR_DEVICE_ATTR_2_RO(in2_alarm, voltage, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2_RO(in3_input, voltage, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2_RW(in3_max, voltage, MAX, 3);
+static SENSOR_DEVICE_ATTR_2_RW(in3_min, voltage, MIN, 3);
+static SENSOR_DEVICE_ATTR_2_RO(in3_alarm, voltage, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2_RO(in4_input, voltage, INPUT, 4);
+static SENSOR_DEVICE_ATTR_2_RW(in4_max, voltage, MAX, 4);
+static SENSOR_DEVICE_ATTR_2_RW(in4_min, voltage, MIN, 4);
+static SENSOR_DEVICE_ATTR_2_RO(in4_alarm, voltage, ALARM, 8);
+static SENSOR_DEVICE_ATTR_2_RO(in5_input, voltage, INPUT, 5);
+static SENSOR_DEVICE_ATTR_2_RW(in5_max, voltage, MAX, 5);
+static SENSOR_DEVICE_ATTR_2_RW(in5_min, voltage, MIN, 5);
+static SENSOR_DEVICE_ATTR_2_RO(in5_alarm, voltage, ALARM, 31);
+static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2_RO(temp1_alarm, temp, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2_RO(temp1_fault, temp, FAULT, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp, MAX, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_min, temp, MIN, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_offset, temp, OFFSET, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point1_temp, temp, AUTOMIN, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point2_temp, point2, 0, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_crit, temp, THERM, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_crit_hyst, temp, HYSTERSIS, 0);
+static SENSOR_DEVICE_ATTR_2_RW(temp1_smoothing, temp_st, 0, 0);
+static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2_RO(temp2_alarm, temp, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_max, temp, MAX, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_min, temp, MIN, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_offset, temp, OFFSET, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point1_temp, temp, AUTOMIN, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point2_temp, point2, 0, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_crit, temp, THERM, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_crit_hyst, temp, HYSTERSIS, 1);
+static SENSOR_DEVICE_ATTR_2_RW(temp2_smoothing, temp_st, 0, 1);
+static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2_RO(temp3_alarm, temp, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2_RO(temp3_fault, temp, FAULT, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_max, temp, MAX, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_min, temp, MIN, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_offset, temp, OFFSET, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_auto_point1_temp, temp, AUTOMIN, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_auto_point2_temp, point2, 0, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_crit, temp, THERM, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_crit_hyst, temp, HYSTERSIS, 2);
+static SENSOR_DEVICE_ATTR_2_RW(temp3_smoothing, temp_st, 0, 2);
+static SENSOR_DEVICE_ATTR_2_RO(fan1_input, tach, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2_RW(fan1_min, tach, MIN, 0);
+static SENSOR_DEVICE_ATTR_2_RO(fan1_alarm, tach, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2_RO(fan2_input, tach, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2_RW(fan2_min, tach, MIN, 1);
+static SENSOR_DEVICE_ATTR_2_RO(fan2_alarm, tach, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2_RO(fan3_input, tach, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2_RW(fan3_min, tach, MIN, 2);
+static SENSOR_DEVICE_ATTR_2_RO(fan3_alarm, tach, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2_RO(fan4_input, tach, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2_RW(fan4_min, tach, MIN, 3);
+static SENSOR_DEVICE_ATTR_2_RO(fan4_alarm, tach, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1, pwm, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_freq, pwmfreq, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_enable, pwmctrl, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_channels_temp, pwmchan, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_pwm, pwm, MIN, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_pwm, pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm1_stall_disable, stall_disable, 0, 0);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2, pwm, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_freq, pwmfreq, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_enable, pwmctrl, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_channels_temp, pwmchan, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_pwm, pwm, MIN, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_pwm, pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm2_stall_disable, stall_disable, 0, 1);
+static SENSOR_DEVICE_ATTR_2_RW(pwm3, pwm, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm3_freq, pwmfreq, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm3_enable, pwmctrl, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_channels_temp, pwmchan, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point1_pwm, pwm, MIN, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point2_pwm, pwm, MAX, 2);
+static SENSOR_DEVICE_ATTR_2_RW(pwm3_stall_disable, stall_disable, 0, 2);
+
+/* Non-standard name, might need revisiting */
+static DEVICE_ATTR_RW(pwm_use_point2_pwm_at_crit);
+
+static DEVICE_ATTR_RW(vrm);
+static DEVICE_ATTR_RO(cpu0_vid);
+
+static struct attribute *adt7475_attrs[] = {
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_offset.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp1_smoothing.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_offset.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_smoothing.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_offset.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_smoothing.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_stall_disable.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_stall_disable.dev_attr.attr,
+ &dev_attr_pwm_use_point2_pwm_at_crit.attr,
+ NULL,
+};
+
+static struct attribute *fan4_attrs[] = {
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *pwm2_attrs[] = {
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_stall_disable.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in0_attrs[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in3_attrs[] = {
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in4_attrs[] = {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in5_attrs[] = {
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *vid_attrs[] = {
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+ NULL
+};
+
+static const struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static const struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
+static const struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
+static const struct attribute_group in0_attr_group = { .attrs = in0_attrs };
+static const struct attribute_group in3_attr_group = { .attrs = in3_attrs };
+static const struct attribute_group in4_attr_group = { .attrs = in4_attrs };
+static const struct attribute_group in5_attr_group = { .attrs = in5_attrs };
+static const struct attribute_group vid_attr_group = { .attrs = vid_attrs };
+
+static int adt7475_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int vendid, devid, devid2;
+ const char *name;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ vendid = adt7475_read(REG_VENDID);
+ devid2 = adt7475_read(REG_DEVID2);
+ if (vendid != 0x41 || /* Analog Devices */
+ (devid2 & 0xf8) != 0x68)
+ return -ENODEV;
+
+ devid = adt7475_read(REG_DEVID);
+ if (devid == 0x73)
+ name = "adt7473";
+ else if (devid == 0x75 && client->addr == 0x2e)
+ name = "adt7475";
+ else if (devid == 0x76)
+ name = "adt7476";
+ else if ((devid2 & 0xfc) == 0x6c)
+ name = "adt7490";
+ else {
+ dev_dbg(&adapter->dev,
+ "Couldn't detect an ADT7473/75/76/90 part at "
+ "0x%02x\n", (unsigned int)client->addr);
+ return -ENODEV;
+ }
+
+ strscpy(info->type, name, I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int adt7475_update_limits(struct i2c_client *client)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ int i;
+ int ret;
+
+ ret = adt7475_read(REG_CONFIG4);
+ if (ret < 0)
+ return ret;
+ data->config4 = ret;
+
+ ret = adt7475_read(REG_CONFIG5);
+ if (ret < 0)
+ return ret;
+ data->config5 = ret;
+
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
+ /* Adjust values so they match the input precision */
+ ret = adt7475_read(VOLTAGE_MIN_REG(i));
+ if (ret < 0)
+ return ret;
+ data->voltage[MIN][i] = ret << 2;
+
+ ret = adt7475_read(VOLTAGE_MAX_REG(i));
+ if (ret < 0)
+ return ret;
+ data->voltage[MAX][i] = ret << 2;
+ }
+
+ if (data->has_voltage & (1 << 5)) {
+ ret = adt7475_read(REG_VTT_MIN);
+ if (ret < 0)
+ return ret;
+ data->voltage[MIN][5] = ret << 2;
+
+ ret = adt7475_read(REG_VTT_MAX);
+ if (ret < 0)
+ return ret;
+ data->voltage[MAX][5] = ret << 2;
+ }
+
+ for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
+ /* Adjust values so they match the input precision */
+ ret = adt7475_read(TEMP_MIN_REG(i));
+ if (ret < 0)
+ return ret;
+ data->temp[MIN][i] = ret << 2;
+
+ ret = adt7475_read(TEMP_MAX_REG(i));
+ if (ret < 0)
+ return ret;
+ data->temp[MAX][i] = ret << 2;
+
+ ret = adt7475_read(TEMP_TMIN_REG(i));
+ if (ret < 0)
+ return ret;
+ data->temp[AUTOMIN][i] = ret << 2;
+
+ ret = adt7475_read(TEMP_THERM_REG(i));
+ if (ret < 0)
+ return ret;
+ data->temp[THERM][i] = ret << 2;
+
+ ret = adt7475_read(TEMP_OFFSET_REG(i));
+ if (ret < 0)
+ return ret;
+ data->temp[OFFSET][i] = ret;
+ }
+ adt7475_read_hystersis(client);
+
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
+ ret = adt7475_read_word(client, TACH_MIN_REG(i));
+ if (ret < 0)
+ return ret;
+ data->tach[MIN][i] = ret;
+ }
+
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
+ ret = adt7475_read(PWM_MAX_REG(i));
+ if (ret < 0)
+ return ret;
+ data->pwm[MAX][i] = ret;
+
+ ret = adt7475_read(PWM_MIN_REG(i));
+ if (ret < 0)
+ return ret;
+ data->pwm[MIN][i] = ret;
+ /* Set the channel and control information */
+ adt7475_read_pwm(client, i);
+ }
+
+ ret = adt7475_read(TEMP_TRANGE_REG(0));
+ if (ret < 0)
+ return ret;
+ data->range[0] = ret;
+
+ ret = adt7475_read(TEMP_TRANGE_REG(1));
+ if (ret < 0)
+ return ret;
+ data->range[1] = ret;
+
+ ret = adt7475_read(TEMP_TRANGE_REG(2));
+ if (ret < 0)
+ return ret;
+ data->range[2] = ret;
+
+ return 0;
+}
+
+static int load_config3(const struct i2c_client *client, const char *propname)
+{
+ const char *function;
+ u8 config3;
+ int ret;
+
+ ret = of_property_read_string(client->dev.of_node, propname, &function);
+ if (!ret) {
+ ret = adt7475_read(REG_CONFIG3);
+ if (ret < 0)
+ return ret;
+
+ config3 = ret & ~CONFIG3_SMBALERT;
+ if (!strcmp("pwm2", function))
+ ;
+ else if (!strcmp("smbalert#", function))
+ config3 |= CONFIG3_SMBALERT;
+ else
+ return -EINVAL;
+
+ return i2c_smbus_write_byte_data(client, REG_CONFIG3, config3);
+ }
+
+ return 0;
+}
+
+static int load_config4(const struct i2c_client *client, const char *propname)
+{
+ const char *function;
+ u8 config4;
+ int ret;
+
+ ret = of_property_read_string(client->dev.of_node, propname, &function);
+ if (!ret) {
+ ret = adt7475_read(REG_CONFIG4);
+ if (ret < 0)
+ return ret;
+
+ config4 = ret & ~CONFIG4_PINFUNC;
+
+ if (!strcmp("tach4", function))
+ ;
+ else if (!strcmp("therm#", function))
+ config4 |= CONFIG4_THERM;
+ else if (!strcmp("smbalert#", function))
+ config4 |= CONFIG4_SMBALERT;
+ else if (!strcmp("gpio", function))
+ config4 |= CONFIG4_PINFUNC;
+ else
+ return -EINVAL;
+
+ return i2c_smbus_write_byte_data(client, REG_CONFIG4, config4);
+ }
+
+ return 0;
+}
+
+static int load_config(const struct i2c_client *client, enum chips chip)
+{
+ int err;
+ const char *prop1, *prop2;
+
+ switch (chip) {
+ case adt7473:
+ case adt7475:
+ prop1 = "adi,pin5-function";
+ prop2 = "adi,pin9-function";
+ break;
+ case adt7476:
+ case adt7490:
+ prop1 = "adi,pin10-function";
+ prop2 = "adi,pin14-function";
+ break;
+ }
+
+ err = load_config3(client, prop1);
+ if (err) {
+ dev_err(&client->dev, "failed to configure %s\n", prop1);
+ return err;
+ }
+
+ err = load_config4(client, prop2);
+ if (err) {
+ dev_err(&client->dev, "failed to configure %s\n", prop2);
+ return err;
+ }
+
+ return 0;
+}
+
+static int set_property_bit(const struct i2c_client *client, char *property,
+ u8 *config, u8 bit_index)
+{
+ u32 prop_value = 0;
+ int ret = of_property_read_u32(client->dev.of_node, property,
+ &prop_value);
+
+ if (!ret) {
+ if (prop_value)
+ *config |= (1 << bit_index);
+ else
+ *config &= ~(1 << bit_index);
+ }
+
+ return ret;
+}
+
+static int load_attenuators(const struct i2c_client *client, enum chips chip,
+ struct adt7475_data *data)
+{
+ switch (chip) {
+ case adt7476:
+ case adt7490:
+ set_property_bit(client, "adi,bypass-attenuator-in0",
+ &data->config4, 4);
+ set_property_bit(client, "adi,bypass-attenuator-in1",
+ &data->config4, 5);
+ set_property_bit(client, "adi,bypass-attenuator-in3",
+ &data->config4, 6);
+ set_property_bit(client, "adi,bypass-attenuator-in4",
+ &data->config4, 7);
+
+ return i2c_smbus_write_byte_data(client, REG_CONFIG4,
+ data->config4);
+ case adt7473:
+ case adt7475:
+ set_property_bit(client, "adi,bypass-attenuator-in1",
+ &data->config2, 5);
+
+ return i2c_smbus_write_byte_data(client, REG_CONFIG2,
+ data->config2);
+ }
+
+ return 0;
+}
+
+static int adt7475_set_pwm_polarity(struct i2c_client *client)
+{
+ u32 states[ADT7475_PWM_COUNT];
+ int ret, i;
+ u8 val;
+
+ ret = device_property_read_u32_array(&client->dev,
+ "adi,pwm-active-state", states,
+ ARRAY_SIZE(states));
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ ret = adt7475_read(PWM_CONFIG_REG(i));
+ if (ret < 0)
+ return ret;
+ val = ret;
+ if (states[i])
+ val &= ~BIT(4);
+ else
+ val |= BIT(4);
+
+ ret = i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(i), val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int adt7475_probe(struct i2c_client *client)
+{
+ enum chips chip;
+ static const char * const names[] = {
+ [adt7473] = "ADT7473",
+ [adt7475] = "ADT7475",
+ [adt7476] = "ADT7476",
+ [adt7490] = "ADT7490",
+ };
+
+ struct adt7475_data *data;
+ struct device *hwmon_dev;
+ int i, ret = 0, revision, group_num = 0;
+ u8 config3;
+ const struct i2c_device_id *id = i2c_match_id(adt7475_id, client);
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ mutex_init(&data->lock);
+ data->client = client;
+ i2c_set_clientdata(client, data);
+
+ if (client->dev.of_node)
+ chip = (enum chips)of_device_get_match_data(&client->dev);
+ else
+ chip = id->driver_data;
+
+ /* Initialize device-specific values */
+ switch (chip) {
+ case adt7476:
+ data->has_voltage = 0x0e; /* in1 to in3 */
+ revision = adt7475_read(REG_DEVID2) & 0x07;
+ break;
+ case adt7490:
+ data->has_voltage = 0x3e; /* in1 to in5 */
+ revision = adt7475_read(REG_DEVID2) & 0x03;
+ if (revision == 0x03)
+ revision += adt7475_read(REG_DEVREV2);
+ break;
+ default:
+ data->has_voltage = 0x06; /* in1, in2 */
+ revision = adt7475_read(REG_DEVID2) & 0x07;
+ }
+
+ ret = load_config(client, chip);
+ if (ret)
+ return ret;
+
+ config3 = adt7475_read(REG_CONFIG3);
+ /* Pin PWM2 may alternatively be used for ALERT output */
+ if (!(config3 & CONFIG3_SMBALERT))
+ data->has_pwm2 = 1;
+ /* Meaning of this bit is inverted for the ADT7473-1 */
+ if (id->driver_data == adt7473 && revision >= 1)
+ data->has_pwm2 = !data->has_pwm2;
+
+ data->config4 = adt7475_read(REG_CONFIG4);
+ /* Pin TACH4 may alternatively be used for THERM */
+ if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
+ data->has_fan4 = 1;
+
+ /*
+ * THERM configuration is more complex on the ADT7476 and ADT7490,
+ * because 2 different pins (TACH4 and +2.5 Vin) can be used for
+ * this function
+ */
+ if (id->driver_data == adt7490) {
+ if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
+ !(config3 & CONFIG3_THERM))
+ data->has_fan4 = 1;
+ }
+ if (id->driver_data == adt7476 || id->driver_data == adt7490) {
+ if (!(config3 & CONFIG3_THERM) ||
+ (data->config4 & CONFIG4_PINFUNC) == 0x1)
+ data->has_voltage |= (1 << 0); /* in0 */
+ }
+
+ /*
+ * On the ADT7476, the +12V input pin may instead be used as VID5,
+ * and VID pins may alternatively be used as GPIO
+ */
+ if (id->driver_data == adt7476) {
+ u8 vid = adt7475_read(REG_VID);
+ if (!(vid & VID_VIDSEL))
+ data->has_voltage |= (1 << 4); /* in4 */
+
+ data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO);
+ }
+
+ /* Voltage attenuators can be bypassed, globally or individually */
+ data->config2 = adt7475_read(REG_CONFIG2);
+ ret = load_attenuators(client, chip, data);
+ if (ret)
+ dev_warn(&client->dev, "Error configuring attenuator bypass\n");
+
+ if (data->config2 & CONFIG2_ATTN) {
+ data->bypass_attn = (0x3 << 3) | 0x3;
+ } else {
+ data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
+ ((data->config4 & CONFIG4_ATTN_IN43) >> 3);
+ }
+ data->bypass_attn &= data->has_voltage;
+
+ /*
+ * Call adt7475_read_pwm for all pwm's as this will reprogram any
+ * pwm's which are disabled to manual mode with 0% duty cycle
+ */
+ for (i = 0; i < ADT7475_PWM_COUNT; i++)
+ adt7475_read_pwm(client, i);
+
+ ret = adt7475_set_pwm_polarity(client);
+ if (ret && ret != -EINVAL)
+ dev_warn(&client->dev, "Error configuring pwm polarity\n");
+
+ /* Start monitoring */
+ switch (chip) {
+ case adt7475:
+ case adt7476:
+ i2c_smbus_write_byte_data(client, REG_CONFIG1,
+ adt7475_read(REG_CONFIG1) | 0x01);
+ break;
+ default:
+ break;
+ }
+
+ data->groups[group_num++] = &adt7475_attr_group;
+
+ /* Features that can be disabled individually */
+ if (data->has_fan4) {
+ data->groups[group_num++] = &fan4_attr_group;
+ }
+ if (data->has_pwm2) {
+ data->groups[group_num++] = &pwm2_attr_group;
+ }
+ if (data->has_voltage & (1 << 0)) {
+ data->groups[group_num++] = &in0_attr_group;
+ }
+ if (data->has_voltage & (1 << 3)) {
+ data->groups[group_num++] = &in3_attr_group;
+ }
+ if (data->has_voltage & (1 << 4)) {
+ data->groups[group_num++] = &in4_attr_group;
+ }
+ if (data->has_voltage & (1 << 5)) {
+ data->groups[group_num++] = &in5_attr_group;
+ }
+ if (data->has_vid) {
+ data->vrm = vid_which_vrm();
+ data->groups[group_num] = &vid_attr_group;
+ }
+
+ /* register device with all the acquired attributes */
+ hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
+ client->name, data,
+ data->groups);
+
+ if (IS_ERR(hwmon_dev)) {
+ ret = PTR_ERR(hwmon_dev);
+ return ret;
+ }
+
+ dev_info(&client->dev, "%s device, revision %d\n",
+ names[id->driver_data], revision);
+ if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2)
+ dev_info(&client->dev, "Optional features:%s%s%s%s%s\n",
+ (data->has_voltage & (1 << 0)) ? " in0" : "",
+ (data->has_voltage & (1 << 4)) ? " in4" : "",
+ data->has_fan4 ? " fan4" : "",
+ data->has_pwm2 ? " pwm2" : "",
+ data->has_vid ? " vid" : "");
+ if (data->bypass_attn)
+ dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n",
+ (data->bypass_attn & (1 << 0)) ? " in0" : "",
+ (data->bypass_attn & (1 << 1)) ? " in1" : "",
+ (data->bypass_attn & (1 << 3)) ? " in3" : "",
+ (data->bypass_attn & (1 << 4)) ? " in4" : "");
+
+ /* Limits and settings, should never change update more than once */
+ ret = adt7475_update_limits(client);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static struct i2c_driver adt7475_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "adt7475",
+ .of_match_table = of_match_ptr(adt7475_of_match),
+ },
+ .probe_new = adt7475_probe,
+ .id_table = adt7475_id,
+ .detect = adt7475_detect,
+ .address_list = normal_i2c,
+};
+
+static void adt7475_read_hystersis(struct i2c_client *client)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+
+ data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS);
+ data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0];
+ data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS);
+}
+
+static void adt7475_read_pwm(struct i2c_client *client, int index)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ unsigned int v;
+
+ data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index));
+
+ /*
+ * Figure out the internal value for pwmctrl and pwmchan
+ * based on the current settings
+ */
+ v = (data->pwm[CONTROL][index] >> 5) & 7;
+
+ if (v == 3)
+ data->pwmctl[index] = 0;
+ else if (v == 7)
+ data->pwmctl[index] = 1;
+ else if (v == 4) {
+ /*
+ * The fan is disabled - we don't want to
+ * support that, so change to manual mode and
+ * set the duty cycle to 0 instead
+ */
+ data->pwm[INPUT][index] = 0;
+ data->pwm[CONTROL][index] &= ~0xE0;
+ data->pwm[CONTROL][index] |= (7 << 5);
+
+ i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+ data->pwm[INPUT][index]);
+
+ i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+ data->pwm[CONTROL][index]);
+
+ data->pwmctl[index] = 1;
+ } else {
+ data->pwmctl[index] = 2;
+
+ switch (v) {
+ case 0:
+ data->pwmchan[index] = 1;
+ break;
+ case 1:
+ data->pwmchan[index] = 2;
+ break;
+ case 2:
+ data->pwmchan[index] = 4;
+ break;
+ case 5:
+ data->pwmchan[index] = 6;
+ break;
+ case 6:
+ data->pwmchan[index] = 7;
+ break;
+ }
+ }
+}
+
+static int adt7475_update_measure(struct device *dev)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ u16 ext;
+ int i;
+ int ret;
+
+ ret = adt7475_read(REG_STATUS2);
+ if (ret < 0)
+ return ret;
+ data->alarms = ret << 8;
+
+ ret = adt7475_read(REG_STATUS1);
+ if (ret < 0)
+ return ret;
+ data->alarms |= ret;
+
+ ret = adt7475_read(REG_EXTEND2);
+ if (ret < 0)
+ return ret;
+
+ ext = (ret << 8);
+
+ ret = adt7475_read(REG_EXTEND1);
+ if (ret < 0)
+ return ret;
+
+ ext |= ret;
+
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
+ ret = adt7475_read(VOLTAGE_REG(i));
+ if (ret < 0)
+ return ret;
+ data->voltage[INPUT][i] =
+ (ret << 2) |
+ ((ext >> (i * 2)) & 3);
+ }
+
+ for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
+ ret = adt7475_read(TEMP_REG(i));
+ if (ret < 0)
+ return ret;
+ data->temp[INPUT][i] =
+ (ret << 2) |
+ ((ext >> ((i + 5) * 2)) & 3);
+ }
+
+ if (data->has_voltage & (1 << 5)) {
+ ret = adt7475_read(REG_STATUS4);
+ if (ret < 0)
+ return ret;
+ data->alarms |= ret << 24;
+
+ ret = adt7475_read(REG_EXTEND3);
+ if (ret < 0)
+ return ret;
+ ext = ret;
+
+ ret = adt7475_read(REG_VTT);
+ if (ret < 0)
+ return ret;
+ data->voltage[INPUT][5] = ret << 2 |
+ ((ext >> 4) & 3);
+ }
+
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
+ ret = adt7475_read_word(client, TACH_REG(i));
+ if (ret < 0)
+ return ret;
+ data->tach[INPUT][i] = ret;
+ }
+
+ /* Updated by hw when in auto mode */
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
+ ret = adt7475_read(PWM_REG(i));
+ if (ret < 0)
+ return ret;
+ data->pwm[INPUT][i] = ret;
+ }
+
+ if (data->has_vid) {
+ ret = adt7475_read(REG_VID);
+ if (ret < 0)
+ return ret;
+ data->vid = ret & 0x3f;
+ }
+
+ return 0;
+}
+
+static struct adt7475_data *adt7475_update_device(struct device *dev)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ /* Measurement values update every 2 seconds */
+ if (time_after(jiffies, data->measure_updated + HZ * 2) ||
+ !data->valid) {
+ ret = adt7475_update_measure(dev);
+ if (ret) {
+ data->valid = false;
+ mutex_unlock(&data->lock);
+ return ERR_PTR(ret);
+ }
+ data->measure_updated = jiffies;
+ data->valid = true;
+ }
+
+ mutex_unlock(&data->lock);
+
+ return data;
+}
+
+module_i2c_driver(adt7475_driver);
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("adt7475 driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 04:48:21 +0000