diff options
Diffstat (limited to 'drivers/hwmon/aquacomputer_d5next.c')
| -rw-r--r-- | drivers/hwmon/aquacomputer_d5next.c | 1059 |
1 files changed, 1059 insertions, 0 deletions
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c new file mode 100644 index 000000000..8c7796d3f --- /dev/null +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -0,0 +1,1059 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo, + * Quadro, High Flow Next) + * + * Aquacomputer devices send HID reports (with ID 0x01) every second to report + * sensor values. + * + * Copyright 2021 Aleksa Savic <savicaleksa83@gmail.com> + * Copyright 2022 Jack Doan <me@jackdoan.com> + */ + +#include <linux/crc16.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/hid.h> +#include <linux/hwmon.h> +#include <linux/jiffies.h> +#include <linux/ktime.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/seq_file.h> +#include <asm/unaligned.h> + +#define USB_VENDOR_ID_AQUACOMPUTER 0x0c70 +#define USB_PRODUCT_ID_FARBWERK 0xf00a +#define USB_PRODUCT_ID_QUADRO 0xf00d +#define USB_PRODUCT_ID_D5NEXT 0xf00e +#define USB_PRODUCT_ID_FARBWERK360 0xf010 +#define USB_PRODUCT_ID_OCTO 0xf011 +#define USB_PRODUCT_ID_HIGHFLOWNEXT 0xf012 + +enum kinds { d5next, farbwerk, farbwerk360, octo, quadro, highflownext }; + +static const char *const aqc_device_names[] = { + [d5next] = "d5next", + [farbwerk] = "farbwerk", + [farbwerk360] = "farbwerk360", + [octo] = "octo", + [quadro] = "quadro", + [highflownext] = "highflownext" +}; + +#define DRIVER_NAME "aquacomputer_d5next" + +#define STATUS_REPORT_ID 0x01 +#define STATUS_UPDATE_INTERVAL (2 * HZ) /* In seconds */ +#define SERIAL_FIRST_PART 3 +#define SERIAL_SECOND_PART 5 +#define FIRMWARE_VERSION 13 + +#define CTRL_REPORT_ID 0x03 + +#define CTRL_REPORT_DELAY 200 /* ms */ + +/* The HID report that the official software always sends + * after writing values, currently same for all devices + */ +#define SECONDARY_CTRL_REPORT_ID 0x02 +#define SECONDARY_CTRL_REPORT_SIZE 0x0B + +static u8 secondary_ctrl_report[] = { + 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6 +}; + +/* Register offsets for all Aquacomputer devices */ +#define AQC_TEMP_SENSOR_SIZE 0x02 +#define AQC_TEMP_SENSOR_DISCONNECTED 0x7FFF +#define AQC_FAN_PERCENT_OFFSET 0x00 +#define AQC_FAN_VOLTAGE_OFFSET 0x02 +#define AQC_FAN_CURRENT_OFFSET 0x04 +#define AQC_FAN_POWER_OFFSET 0x06 +#define AQC_FAN_SPEED_OFFSET 0x08 + +/* Register offsets for the D5 Next pump */ +#define D5NEXT_POWER_CYCLES 0x18 +#define D5NEXT_COOLANT_TEMP 0x57 +#define D5NEXT_NUM_FANS 2 +#define D5NEXT_NUM_SENSORS 1 +#define D5NEXT_NUM_VIRTUAL_SENSORS 8 +#define D5NEXT_VIRTUAL_SENSORS_START 0x3f +#define D5NEXT_PUMP_OFFSET 0x6c +#define D5NEXT_FAN_OFFSET 0x5f +#define D5NEXT_5V_VOLTAGE 0x39 +#define D5NEXT_12V_VOLTAGE 0x37 +#define D5NEXT_CTRL_REPORT_SIZE 0x329 +static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET }; + +/* Pump and fan speed registers in D5 Next control report (from 0-100%) */ +static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 }; + +/* Register offsets for the Farbwerk RGB controller */ +#define FARBWERK_NUM_SENSORS 4 +#define FARBWERK_SENSOR_START 0x2f + +/* Register offsets for the Farbwerk 360 RGB controller */ +#define FARBWERK360_NUM_SENSORS 4 +#define FARBWERK360_SENSOR_START 0x32 +#define FARBWERK360_NUM_VIRTUAL_SENSORS 16 +#define FARBWERK360_VIRTUAL_SENSORS_START 0x3a + +/* Register offsets for the Octo fan controller */ +#define OCTO_POWER_CYCLES 0x18 +#define OCTO_NUM_FANS 8 +#define OCTO_NUM_SENSORS 4 +#define OCTO_SENSOR_START 0x3D +#define OCTO_NUM_VIRTUAL_SENSORS 16 +#define OCTO_VIRTUAL_SENSORS_START 0x45 +#define OCTO_CTRL_REPORT_SIZE 0x65F +static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 }; + +/* Fan speed registers in Octo control report (from 0-100%) */ +static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE }; + +/* Register offsets for the Quadro fan controller */ +#define QUADRO_POWER_CYCLES 0x18 +#define QUADRO_NUM_FANS 4 +#define QUADRO_NUM_SENSORS 4 +#define QUADRO_SENSOR_START 0x34 +#define QUADRO_NUM_VIRTUAL_SENSORS 16 +#define QUADRO_VIRTUAL_SENSORS_START 0x3c +#define QUADRO_CTRL_REPORT_SIZE 0x3c1 +#define QUADRO_FLOW_SENSOR_OFFSET 0x6e +static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 }; + +/* Fan speed registers in Quadro control report (from 0-100%) */ +static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; + +/* Register offsets for the High Flow Next */ +#define HIGHFLOWNEXT_NUM_SENSORS 2 +#define HIGHFLOWNEXT_SENSOR_START 85 +#define HIGHFLOWNEXT_FLOW 81 +#define HIGHFLOWNEXT_WATER_QUALITY 89 +#define HIGHFLOWNEXT_POWER 91 +#define HIGHFLOWNEXT_CONDUCTIVITY 95 +#define HIGHFLOWNEXT_5V_VOLTAGE 97 +#define HIGHFLOWNEXT_5V_VOLTAGE_USB 99 + +/* Labels for D5 Next */ +static const char *const label_d5next_temp[] = { + "Coolant temp" +}; + +static const char *const label_d5next_speeds[] = { + "Pump speed", + "Fan speed" +}; + +static const char *const label_d5next_power[] = { + "Pump power", + "Fan power" +}; + +static const char *const label_d5next_voltages[] = { + "Pump voltage", + "Fan voltage", + "+5V voltage", + "+12V voltage" +}; + +static const char *const label_d5next_current[] = { + "Pump current", + "Fan current" +}; + +/* Labels for Farbwerk, Farbwerk 360 and Octo and Quadro temperature sensors */ +static const char *const label_temp_sensors[] = { + "Sensor 1", + "Sensor 2", + "Sensor 3", + "Sensor 4" +}; + +static const char *const label_virtual_temp_sensors[] = { + "Virtual sensor 1", + "Virtual sensor 2", + "Virtual sensor 3", + "Virtual sensor 4", + "Virtual sensor 5", + "Virtual sensor 6", + "Virtual sensor 7", + "Virtual sensor 8", + "Virtual sensor 9", + "Virtual sensor 10", + "Virtual sensor 11", + "Virtual sensor 12", + "Virtual sensor 13", + "Virtual sensor 14", + "Virtual sensor 15", + "Virtual sensor 16", +}; + +/* Labels for Octo and Quadro (except speed) */ +static const char *const label_fan_speed[] = { + "Fan 1 speed", + "Fan 2 speed", + "Fan 3 speed", + "Fan 4 speed", + "Fan 5 speed", + "Fan 6 speed", + "Fan 7 speed", + "Fan 8 speed" +}; + +static const char *const label_fan_power[] = { + "Fan 1 power", + "Fan 2 power", + "Fan 3 power", + "Fan 4 power", + "Fan 5 power", + "Fan 6 power", + "Fan 7 power", + "Fan 8 power" +}; + +static const char *const label_fan_voltage[] = { + "Fan 1 voltage", + "Fan 2 voltage", + "Fan 3 voltage", + "Fan 4 voltage", + "Fan 5 voltage", + "Fan 6 voltage", + "Fan 7 voltage", + "Fan 8 voltage" +}; + +static const char *const label_fan_current[] = { + "Fan 1 current", + "Fan 2 current", + "Fan 3 current", + "Fan 4 current", + "Fan 5 current", + "Fan 6 current", + "Fan 7 current", + "Fan 8 current" +}; + +/* Labels for Quadro fan speeds */ +static const char *const label_quadro_speeds[] = { + "Fan 1 speed", + "Fan 2 speed", + "Fan 3 speed", + "Fan 4 speed", + "Flow speed [dL/h]" +}; + +/* Labels for High Flow Next */ +static const char *const label_highflownext_temp_sensors[] = { + "Coolant temp", + "External sensor" +}; + +static const char *const label_highflownext_fan_speed[] = { + "Flow [dL/h]", + "Water quality [%]", + "Conductivity [nS/cm]", +}; + +static const char *const label_highflownext_power[] = { + "Dissipated power", +}; + +static const char *const label_highflownext_voltage[] = { + "+5V voltage", + "+5V USB voltage" +}; + +struct aqc_data { + struct hid_device *hdev; + struct device *hwmon_dev; + struct dentry *debugfs; + struct mutex mutex; /* Used for locking access when reading and writing PWM values */ + enum kinds kind; + const char *name; + + ktime_t last_ctrl_report_op; + int ctrl_report_delay; /* Delay between two ctrl report operations, in ms */ + + int buffer_size; + u8 *buffer; + int checksum_start; + int checksum_length; + int checksum_offset; + + int num_fans; + u8 *fan_sensor_offsets; + u16 *fan_ctrl_offsets; + int num_temp_sensors; + int temp_sensor_start_offset; + int num_virtual_temp_sensors; + int virtual_temp_sensor_start_offset; + u16 power_cycle_count_offset; + u8 flow_sensor_offset; + + /* General info, same across all devices */ + u32 serial_number[2]; + u16 firmware_version; + + /* How many times the device was powered on, if available */ + u32 power_cycles; + + /* Sensor values */ + s32 temp_input[20]; /* Max 4 physical and 16 virtual */ + u16 speed_input[8]; + u32 power_input[8]; + u16 voltage_input[8]; + u16 current_input[8]; + + /* Label values */ + const char *const *temp_label; + const char *const *virtual_temp_label; + const char *const *speed_label; + const char *const *power_label; + const char *const *voltage_label; + const char *const *current_label; + + unsigned long updated; +}; + +/* Converts from centi-percent */ +static int aqc_percent_to_pwm(u16 val) +{ + return DIV_ROUND_CLOSEST(val * 255, 100 * 100); +} + +/* Converts to centi-percent */ +static int aqc_pwm_to_percent(long val) +{ + if (val < 0 || val > 255) + return -EINVAL; + + return DIV_ROUND_CLOSEST(val * 100 * 100, 255); +} + +static void aqc_delay_ctrl_report(struct aqc_data *priv) +{ + /* + * If previous read or write is too close to this one, delay the current operation + * to give the device enough time to process the previous one. + */ + if (priv->ctrl_report_delay) { + s64 delta = ktime_ms_delta(ktime_get(), priv->last_ctrl_report_op); + + if (delta < priv->ctrl_report_delay) + msleep(priv->ctrl_report_delay - delta); + } +} + +/* Expects the mutex to be locked */ +static int aqc_get_ctrl_data(struct aqc_data *priv) +{ + int ret; + + aqc_delay_ctrl_report(priv); + + memset(priv->buffer, 0x00, priv->buffer_size); + ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size, + HID_FEATURE_REPORT, HID_REQ_GET_REPORT); + if (ret < 0) + ret = -ENODATA; + + priv->last_ctrl_report_op = ktime_get(); + + return ret; +} + +/* Expects the mutex to be locked */ +static int aqc_send_ctrl_data(struct aqc_data *priv) +{ + int ret; + u16 checksum; + + aqc_delay_ctrl_report(priv); + + /* Init and xorout value for CRC-16/USB is 0xffff */ + checksum = crc16(0xffff, priv->buffer + priv->checksum_start, priv->checksum_length); + checksum ^= 0xffff; + + /* Place the new checksum at the end of the report */ + put_unaligned_be16(checksum, priv->buffer + priv->checksum_offset); + + /* Send the patched up report back to the device */ + ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size, + HID_FEATURE_REPORT, HID_REQ_SET_REPORT); + if (ret < 0) + goto record_access_and_ret; + + /* The official software sends this report after every change, so do it here as well */ + ret = hid_hw_raw_request(priv->hdev, SECONDARY_CTRL_REPORT_ID, secondary_ctrl_report, + SECONDARY_CTRL_REPORT_SIZE, HID_FEATURE_REPORT, + HID_REQ_SET_REPORT); + +record_access_and_ret: + priv->last_ctrl_report_op = ktime_get(); + + return ret; +} + +/* Refreshes the control buffer and returns value at offset */ +static int aqc_get_ctrl_val(struct aqc_data *priv, int offset) +{ + int ret; + + mutex_lock(&priv->mutex); + + ret = aqc_get_ctrl_data(priv); + if (ret < 0) + goto unlock_and_return; + + ret = get_unaligned_be16(priv->buffer + offset); + +unlock_and_return: + mutex_unlock(&priv->mutex); + return ret; +} + +static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val) +{ + int ret; + + mutex_lock(&priv->mutex); + + ret = aqc_get_ctrl_data(priv); + if (ret < 0) + goto unlock_and_return; + + put_unaligned_be16((u16)val, priv->buffer + offset); + + ret = aqc_send_ctrl_data(priv); + +unlock_and_return: + mutex_unlock(&priv->mutex); + return ret; +} + +static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) +{ + const struct aqc_data *priv = data; + + switch (type) { + case hwmon_temp: + if (channel < priv->num_temp_sensors + priv->num_virtual_temp_sensors) + return 0444; + break; + case hwmon_pwm: + if (priv->fan_ctrl_offsets && channel < priv->num_fans) { + switch (attr) { + case hwmon_pwm_input: + return 0644; + default: + break; + } + } + break; + case hwmon_fan: + switch (priv->kind) { + case highflownext: + /* Special case to support flow sensor, water quality and conductivity */ + if (channel < 3) + return 0444; + break; + case quadro: + /* Special case to support flow sensor */ + if (channel < priv->num_fans + 1) + return 0444; + break; + default: + if (channel < priv->num_fans) + return 0444; + break; + } + break; + case hwmon_power: + switch (priv->kind) { + case highflownext: + /* Special case to support one power sensor */ + if (channel == 0) + return 0444; + break; + default: + if (channel < priv->num_fans) + return 0444; + break; + } + break; + case hwmon_curr: + if (channel < priv->num_fans) + return 0444; + break; + case hwmon_in: + switch (priv->kind) { + case d5next: + /* Special case to support +5V and +12V voltage sensors */ + if (channel < priv->num_fans + 2) + return 0444; + break; + case highflownext: + /* Special case to support two voltage sensors */ + if (channel < 2) + return 0444; + break; + default: + if (channel < priv->num_fans) + return 0444; + break; + } + break; + default: + break; + } + + return 0; +} + +static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + int ret; + struct aqc_data *priv = dev_get_drvdata(dev); + + if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL)) + return -ENODATA; + + switch (type) { + case hwmon_temp: + if (priv->temp_input[channel] == -ENODATA) + return -ENODATA; + + *val = priv->temp_input[channel]; + break; + case hwmon_fan: + *val = priv->speed_input[channel]; + break; + case hwmon_power: + *val = priv->power_input[channel]; + break; + case hwmon_pwm: + if (priv->fan_ctrl_offsets) { + ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel]); + if (ret < 0) + return ret; + + *val = aqc_percent_to_pwm(ret); + } + break; + case hwmon_in: + *val = priv->voltage_input[channel]; + break; + case hwmon_curr: + *val = priv->current_input[channel]; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int aqc_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, const char **str) +{ + struct aqc_data *priv = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + if (channel < priv->num_temp_sensors) + *str = priv->temp_label[channel]; + else + *str = priv->virtual_temp_label[channel - priv->num_temp_sensors]; + break; + case hwmon_fan: + *str = priv->speed_label[channel]; + break; + case hwmon_power: + *str = priv->power_label[channel]; + break; + case hwmon_in: + *str = priv->voltage_label[channel]; + break; + case hwmon_curr: + *str = priv->current_label[channel]; + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, + long val) +{ + int ret, pwm_value; + struct aqc_data *priv = dev_get_drvdata(dev); + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + if (priv->fan_ctrl_offsets) { + pwm_value = aqc_pwm_to_percent(val); + if (pwm_value < 0) + return pwm_value; + + ret = aqc_set_ctrl_val(priv, priv->fan_ctrl_offsets[channel], + pwm_value); + if (ret < 0) + return ret; + } + break; + default: + break; + } + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static const struct hwmon_ops aqc_hwmon_ops = { + .is_visible = aqc_is_visible, + .read = aqc_read, + .read_string = aqc_read_string, + .write = aqc_write +}; + +static const struct hwmon_channel_info *aqc_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL), + HWMON_CHANNEL_INFO(power, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL), + HWMON_CHANNEL_INFO(curr, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL), + NULL +}; + +static const struct hwmon_chip_info aqc_chip_info = { + .ops = &aqc_hwmon_ops, + .info = aqc_info, +}; + +static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) +{ + int i, j, sensor_value; + struct aqc_data *priv; + + if (report->id != STATUS_REPORT_ID) + return 0; + + priv = hid_get_drvdata(hdev); + + /* Info provided with every report */ + priv->serial_number[0] = get_unaligned_be16(data + SERIAL_FIRST_PART); + priv->serial_number[1] = get_unaligned_be16(data + SERIAL_SECOND_PART); + priv->firmware_version = get_unaligned_be16(data + FIRMWARE_VERSION); + + /* Physical temperature sensor readings */ + for (i = 0; i < priv->num_temp_sensors; i++) { + sensor_value = get_unaligned_be16(data + + priv->temp_sensor_start_offset + + i * AQC_TEMP_SENSOR_SIZE); + if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED) + priv->temp_input[i] = -ENODATA; + else + priv->temp_input[i] = sensor_value * 10; + } + + /* Virtual temperature sensor readings */ + for (j = 0; j < priv->num_virtual_temp_sensors; j++) { + sensor_value = get_unaligned_be16(data + + priv->virtual_temp_sensor_start_offset + + j * AQC_TEMP_SENSOR_SIZE); + if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED) + priv->temp_input[i] = -ENODATA; + else + priv->temp_input[i] = sensor_value * 10; + i++; + } + + /* Fan speed and related readings */ + for (i = 0; i < priv->num_fans; i++) { + priv->speed_input[i] = + get_unaligned_be16(data + priv->fan_sensor_offsets[i] + AQC_FAN_SPEED_OFFSET); + priv->power_input[i] = + get_unaligned_be16(data + priv->fan_sensor_offsets[i] + + AQC_FAN_POWER_OFFSET) * 10000; + priv->voltage_input[i] = + get_unaligned_be16(data + priv->fan_sensor_offsets[i] + + AQC_FAN_VOLTAGE_OFFSET) * 10; + priv->current_input[i] = + get_unaligned_be16(data + priv->fan_sensor_offsets[i] + AQC_FAN_CURRENT_OFFSET); + } + + if (priv->power_cycle_count_offset != 0) + priv->power_cycles = get_unaligned_be32(data + priv->power_cycle_count_offset); + + /* Special-case sensor readings */ + switch (priv->kind) { + case d5next: + priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10; + priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10; + break; + case quadro: + priv->speed_input[4] = get_unaligned_be16(data + priv->flow_sensor_offset); + break; + case highflownext: + /* If external temp sensor is not connected, its power reading is also N/A */ + if (priv->temp_input[1] == -ENODATA) + priv->power_input[0] = -ENODATA; + else + priv->power_input[0] = + get_unaligned_be16(data + HIGHFLOWNEXT_POWER) * 1000000; + + priv->voltage_input[0] = get_unaligned_be16(data + HIGHFLOWNEXT_5V_VOLTAGE) * 10; + priv->voltage_input[1] = + get_unaligned_be16(data + HIGHFLOWNEXT_5V_VOLTAGE_USB) * 10; + + priv->speed_input[0] = get_unaligned_be16(data + HIGHFLOWNEXT_FLOW); + priv->speed_input[1] = get_unaligned_be16(data + HIGHFLOWNEXT_WATER_QUALITY); + priv->speed_input[2] = get_unaligned_be16(data + HIGHFLOWNEXT_CONDUCTIVITY); + break; + default: + break; + } + + priv->updated = jiffies; + + return 0; +} + +#ifdef CONFIG_DEBUG_FS + +static int serial_number_show(struct seq_file *seqf, void *unused) +{ + struct aqc_data *priv = seqf->private; + + seq_printf(seqf, "%05u-%05u\n", priv->serial_number[0], priv->serial_number[1]); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(serial_number); + +static int firmware_version_show(struct seq_file *seqf, void *unused) +{ + struct aqc_data *priv = seqf->private; + + seq_printf(seqf, "%u\n", priv->firmware_version); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(firmware_version); + +static int power_cycles_show(struct seq_file *seqf, void *unused) +{ + struct aqc_data *priv = seqf->private; + + seq_printf(seqf, "%u\n", priv->power_cycles); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(power_cycles); + +static void aqc_debugfs_init(struct aqc_data *priv) +{ + char name[64]; + + scnprintf(name, sizeof(name), "%s_%s-%s", "aquacomputer", priv->name, + dev_name(&priv->hdev->dev)); + + priv->debugfs = debugfs_create_dir(name, NULL); + debugfs_create_file("serial_number", 0444, priv->debugfs, priv, &serial_number_fops); + debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops); + + if (priv->power_cycle_count_offset != 0) + debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops); +} + +#else + +static void aqc_debugfs_init(struct aqc_data *priv) +{ +} + +#endif + +static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + struct aqc_data *priv; + int ret; + + priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->hdev = hdev; + hid_set_drvdata(hdev, priv); + + priv->updated = jiffies - STATUS_UPDATE_INTERVAL; + + ret = hid_parse(hdev); + if (ret) + return ret; + + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (ret) + return ret; + + ret = hid_hw_open(hdev); + if (ret) + goto fail_and_stop; + + switch (hdev->product) { + case USB_PRODUCT_ID_D5NEXT: + priv->kind = d5next; + + priv->num_fans = D5NEXT_NUM_FANS; + priv->fan_sensor_offsets = d5next_sensor_fan_offsets; + priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets; + priv->num_temp_sensors = D5NEXT_NUM_SENSORS; + priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP; + priv->num_virtual_temp_sensors = D5NEXT_NUM_VIRTUAL_SENSORS; + priv->virtual_temp_sensor_start_offset = D5NEXT_VIRTUAL_SENSORS_START; + priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES; + priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE; + priv->ctrl_report_delay = CTRL_REPORT_DELAY; + + priv->temp_label = label_d5next_temp; + priv->virtual_temp_label = label_virtual_temp_sensors; + priv->speed_label = label_d5next_speeds; + priv->power_label = label_d5next_power; + priv->voltage_label = label_d5next_voltages; + priv->current_label = label_d5next_current; + break; + case USB_PRODUCT_ID_FARBWERK: + priv->kind = farbwerk; + + priv->num_fans = 0; + priv->num_temp_sensors = FARBWERK_NUM_SENSORS; + priv->temp_sensor_start_offset = FARBWERK_SENSOR_START; + priv->temp_label = label_temp_sensors; + break; + case USB_PRODUCT_ID_FARBWERK360: + priv->kind = farbwerk360; + + priv->num_fans = 0; + priv->num_temp_sensors = FARBWERK360_NUM_SENSORS; + priv->temp_sensor_start_offset = FARBWERK360_SENSOR_START; + priv->num_virtual_temp_sensors = FARBWERK360_NUM_VIRTUAL_SENSORS; + priv->virtual_temp_sensor_start_offset = FARBWERK360_VIRTUAL_SENSORS_START; + + priv->temp_label = label_temp_sensors; + priv->virtual_temp_label = label_virtual_temp_sensors; + break; + case USB_PRODUCT_ID_OCTO: + priv->kind = octo; + + priv->num_fans = OCTO_NUM_FANS; + priv->fan_sensor_offsets = octo_sensor_fan_offsets; + priv->fan_ctrl_offsets = octo_ctrl_fan_offsets; + priv->num_temp_sensors = OCTO_NUM_SENSORS; + priv->temp_sensor_start_offset = OCTO_SENSOR_START; + priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS; + priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START; + priv->power_cycle_count_offset = OCTO_POWER_CYCLES; + priv->buffer_size = OCTO_CTRL_REPORT_SIZE; + priv->ctrl_report_delay = CTRL_REPORT_DELAY; + + priv->temp_label = label_temp_sensors; + priv->virtual_temp_label = label_virtual_temp_sensors; + priv->speed_label = label_fan_speed; + priv->power_label = label_fan_power; + priv->voltage_label = label_fan_voltage; + priv->current_label = label_fan_current; + break; + case USB_PRODUCT_ID_QUADRO: + priv->kind = quadro; + + priv->num_fans = QUADRO_NUM_FANS; + priv->fan_sensor_offsets = quadro_sensor_fan_offsets; + priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets; + priv->num_temp_sensors = QUADRO_NUM_SENSORS; + priv->temp_sensor_start_offset = QUADRO_SENSOR_START; + priv->num_virtual_temp_sensors = QUADRO_NUM_VIRTUAL_SENSORS; + priv->virtual_temp_sensor_start_offset = QUADRO_VIRTUAL_SENSORS_START; + priv->power_cycle_count_offset = QUADRO_POWER_CYCLES; + priv->buffer_size = QUADRO_CTRL_REPORT_SIZE; + priv->ctrl_report_delay = CTRL_REPORT_DELAY; + priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET; + + priv->temp_label = label_temp_sensors; + priv->virtual_temp_label = label_virtual_temp_sensors; + priv->speed_label = label_quadro_speeds; + priv->power_label = label_fan_power; + priv->voltage_label = label_fan_voltage; + priv->current_label = label_fan_current; + break; + case USB_PRODUCT_ID_HIGHFLOWNEXT: + priv->kind = highflownext; + + priv->num_fans = 0; + priv->num_temp_sensors = HIGHFLOWNEXT_NUM_SENSORS; + priv->temp_sensor_start_offset = HIGHFLOWNEXT_SENSOR_START; + priv->power_cycle_count_offset = QUADRO_POWER_CYCLES; + + priv->temp_label = label_highflownext_temp_sensors; + priv->speed_label = label_highflownext_fan_speed; + priv->power_label = label_highflownext_power; + priv->voltage_label = label_highflownext_voltage; + break; + default: + break; + } + + if (priv->buffer_size != 0) { + priv->checksum_start = 0x01; + priv->checksum_length = priv->buffer_size - 3; + priv->checksum_offset = priv->buffer_size - 2; + } + + priv->name = aqc_device_names[priv->kind]; + + priv->buffer = devm_kzalloc(&hdev->dev, priv->buffer_size, GFP_KERNEL); + if (!priv->buffer) { + ret = -ENOMEM; + goto fail_and_close; + } + + mutex_init(&priv->mutex); + + priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, priv->name, priv, + &aqc_chip_info, NULL); + + if (IS_ERR(priv->hwmon_dev)) { + ret = PTR_ERR(priv->hwmon_dev); + goto fail_and_close; + } + + aqc_debugfs_init(priv); + + return 0; + +fail_and_close: + hid_hw_close(hdev); +fail_and_stop: + hid_hw_stop(hdev); + return ret; +} + +static void aqc_remove(struct hid_device *hdev) +{ + struct aqc_data *priv = hid_get_drvdata(hdev); + + debugfs_remove_recursive(priv->debugfs); + hwmon_device_unregister(priv->hwmon_dev); + + hid_hw_close(hdev); + hid_hw_stop(hdev); +} + +static const struct hid_device_id aqc_table[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_HIGHFLOWNEXT) }, + { } +}; + +MODULE_DEVICE_TABLE(hid, aqc_table); + +static struct hid_driver aqc_driver = { + .name = DRIVER_NAME, + .id_table = aqc_table, + .probe = aqc_probe, + .remove = aqc_remove, + .raw_event = aqc_raw_event, +}; + +static int __init aqc_init(void) +{ + return hid_register_driver(&aqc_driver); +} + +static void __exit aqc_exit(void) +{ + hid_unregister_driver(&aqc_driver); +} + +/* Request to initialize after the HID bus to ensure it's not being loaded before */ +late_initcall(aqc_init); +module_exit(aqc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>"); +MODULE_AUTHOR("Jack Doan <me@jackdoan.com>"); +MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices"); |