diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/iio/adc/exynos_adc.c | 1025 |
1 files changed, 1025 insertions, 0 deletions
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c new file mode 100644 index 000000000..43c8af41b --- /dev/null +++ b/drivers/iio/adc/exynos_adc.c @@ -0,0 +1,1025 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * exynos_adc.c - Support for ADC in EXYNOS SoCs + * + * 8 ~ 10 channel, 10/12-bit ADC + * + * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com> + */ + +#include <linux/compiler.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/regulator/consumer.h> +#include <linux/of_platform.h> +#include <linux/err.h> +#include <linux/input.h> + +#include <linux/iio/iio.h> +#include <linux/iio/machine.h> +#include <linux/iio/driver.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +#include <linux/platform_data/touchscreen-s3c2410.h> + +/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */ +#define ADC_V1_CON(x) ((x) + 0x00) +#define ADC_V1_TSC(x) ((x) + 0x04) +#define ADC_V1_DLY(x) ((x) + 0x08) +#define ADC_V1_DATX(x) ((x) + 0x0C) +#define ADC_V1_DATY(x) ((x) + 0x10) +#define ADC_V1_UPDN(x) ((x) + 0x14) +#define ADC_V1_INTCLR(x) ((x) + 0x18) +#define ADC_V1_MUX(x) ((x) + 0x1c) +#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20) + +/* S3C2410 ADC registers definitions */ +#define ADC_S3C2410_MUX(x) ((x) + 0x18) + +/* Future ADC_V2 registers definitions */ +#define ADC_V2_CON1(x) ((x) + 0x00) +#define ADC_V2_CON2(x) ((x) + 0x04) +#define ADC_V2_STAT(x) ((x) + 0x08) +#define ADC_V2_INT_EN(x) ((x) + 0x10) +#define ADC_V2_INT_ST(x) ((x) + 0x14) +#define ADC_V2_VER(x) ((x) + 0x20) + +/* Bit definitions for ADC_V1 */ +#define ADC_V1_CON_RES (1u << 16) +#define ADC_V1_CON_PRSCEN (1u << 14) +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) +#define ADC_V1_CON_STANDBY (1u << 2) + +/* Bit definitions for S3C2410 ADC */ +#define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3) +#define ADC_S3C2410_DATX_MASK 0x3FF +#define ADC_S3C2416_CON_RES_SEL (1u << 3) + +/* touch screen always uses channel 0 */ +#define ADC_S3C2410_MUX_TS 0 + +/* ADCTSC Register Bits */ +#define ADC_S3C2443_TSC_UD_SEN (1u << 8) +#define ADC_S3C2410_TSC_YM_SEN (1u << 7) +#define ADC_S3C2410_TSC_YP_SEN (1u << 6) +#define ADC_S3C2410_TSC_XM_SEN (1u << 5) +#define ADC_S3C2410_TSC_XP_SEN (1u << 4) +#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3) +#define ADC_S3C2410_TSC_AUTO_PST (1u << 2) +#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0) + +#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \ + ADC_S3C2410_TSC_YP_SEN | \ + ADC_S3C2410_TSC_XP_SEN | \ + ADC_S3C2410_TSC_XY_PST(3)) + +#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \ + ADC_S3C2410_TSC_YP_SEN | \ + ADC_S3C2410_TSC_XP_SEN | \ + ADC_S3C2410_TSC_AUTO_PST | \ + ADC_S3C2410_TSC_XY_PST(0)) + +/* Bit definitions for ADC_V2 */ +#define ADC_V2_CON1_SOFT_RESET (1u << 2) + +#define ADC_V2_CON2_OSEL (1u << 10) +#define ADC_V2_CON2_ESEL (1u << 9) +#define ADC_V2_CON2_HIGHF (1u << 8) +#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) +#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) +#define ADC_V2_CON2_ACH_MASK 0xF + +#define MAX_ADC_V2_CHANNELS 10 +#define MAX_ADC_V1_CHANNELS 8 +#define MAX_EXYNOS3250_ADC_CHANNELS 2 +#define MAX_EXYNOS4212_ADC_CHANNELS 4 +#define MAX_S5PV210_ADC_CHANNELS 10 + +/* Bit definitions common for ADC_V1 and ADC_V2 */ +#define ADC_CON_EN_START (1u << 0) +#define ADC_CON_EN_START_MASK (0x3 << 0) +#define ADC_DATX_PRESSED (1u << 15) +#define ADC_DATX_MASK 0xFFF +#define ADC_DATY_MASK 0xFFF + +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) + +#define EXYNOS_ADCV1_PHY_OFFSET 0x0718 +#define EXYNOS_ADCV2_PHY_OFFSET 0x0720 + +struct exynos_adc { + struct exynos_adc_data *data; + struct device *dev; + struct input_dev *input; + void __iomem *regs; + struct regmap *pmu_map; + struct clk *clk; + struct clk *sclk; + unsigned int irq; + unsigned int tsirq; + unsigned int delay; + struct regulator *vdd; + + struct completion completion; + + u32 value; + unsigned int version; + + bool ts_enabled; + + bool read_ts; + u32 ts_x; + u32 ts_y; + + /* + * Lock to protect from potential concurrent access to the + * completion callback during a manual conversion. For this driver + * a wait-callback is used to wait for the conversion result, + * so in the meantime no other read request (or conversion start) + * must be performed, otherwise it would interfere with the + * current conversion result. + */ + struct mutex lock; +}; + +struct exynos_adc_data { + int num_channels; + bool needs_sclk; + bool needs_adc_phy; + int phy_offset; + u32 mask; + + void (*init_hw)(struct exynos_adc *info); + void (*exit_hw)(struct exynos_adc *info); + void (*clear_irq)(struct exynos_adc *info); + void (*start_conv)(struct exynos_adc *info, unsigned long addr); +}; + +static void exynos_adc_unprepare_clk(struct exynos_adc *info) +{ + if (info->data->needs_sclk) + clk_unprepare(info->sclk); + clk_unprepare(info->clk); +} + +static int exynos_adc_prepare_clk(struct exynos_adc *info) +{ + int ret; + + ret = clk_prepare(info->clk); + if (ret) { + dev_err(info->dev, "failed preparing adc clock: %d\n", ret); + return ret; + } + + if (info->data->needs_sclk) { + ret = clk_prepare(info->sclk); + if (ret) { + clk_unprepare(info->clk); + dev_err(info->dev, + "failed preparing sclk_adc clock: %d\n", ret); + return ret; + } + } + + return 0; +} + +static void exynos_adc_disable_clk(struct exynos_adc *info) +{ + if (info->data->needs_sclk) + clk_disable(info->sclk); + clk_disable(info->clk); +} + +static int exynos_adc_enable_clk(struct exynos_adc *info) +{ + int ret; + + ret = clk_enable(info->clk); + if (ret) { + dev_err(info->dev, "failed enabling adc clock: %d\n", ret); + return ret; + } + + if (info->data->needs_sclk) { + ret = clk_enable(info->sclk); + if (ret) { + clk_disable(info->clk); + dev_err(info->dev, + "failed enabling sclk_adc clock: %d\n", ret); + return ret; + } + } + + return 0; +} + +static void exynos_adc_v1_init_hw(struct exynos_adc *info) +{ + u32 con1; + + if (info->data->needs_adc_phy) + regmap_write(info->pmu_map, info->data->phy_offset, 1); + + /* set default prescaler values and Enable prescaler */ + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; + + /* Enable 12-bit ADC resolution */ + con1 |= ADC_V1_CON_RES; + writel(con1, ADC_V1_CON(info->regs)); + + /* set touchscreen delay */ + writel(info->delay, ADC_V1_DLY(info->regs)); +} + +static void exynos_adc_v1_exit_hw(struct exynos_adc *info) +{ + u32 con; + + if (info->data->needs_adc_phy) + regmap_write(info->pmu_map, info->data->phy_offset, 0); + + con = readl(ADC_V1_CON(info->regs)); + con |= ADC_V1_CON_STANDBY; + writel(con, ADC_V1_CON(info->regs)); +} + +static void exynos_adc_v1_clear_irq(struct exynos_adc *info) +{ + writel(1, ADC_V1_INTCLR(info->regs)); +} + +static void exynos_adc_v1_start_conv(struct exynos_adc *info, + unsigned long addr) +{ + u32 con1; + + writel(addr, ADC_V1_MUX(info->regs)); + + con1 = readl(ADC_V1_CON(info->regs)); + writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); +} + +/* Exynos4212 and 4412 is like ADCv1 but with four channels only */ +static const struct exynos_adc_data exynos4212_adc_data = { + .num_channels = MAX_EXYNOS4212_ADC_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_adc_phy = true, + .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .clear_irq = exynos_adc_v1_clear_irq, + .start_conv = exynos_adc_v1_start_conv, +}; + +static const struct exynos_adc_data exynos_adc_v1_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_adc_phy = true, + .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .clear_irq = exynos_adc_v1_clear_irq, + .start_conv = exynos_adc_v1_start_conv, +}; + +static const struct exynos_adc_data exynos_adc_s5pv210_data = { + .num_channels = MAX_S5PV210_ADC_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .clear_irq = exynos_adc_v1_clear_irq, + .start_conv = exynos_adc_v1_start_conv, +}; + +static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info, + unsigned long addr) +{ + u32 con1; + + /* Enable 12 bit ADC resolution */ + con1 = readl(ADC_V1_CON(info->regs)); + con1 |= ADC_S3C2416_CON_RES_SEL; + writel(con1, ADC_V1_CON(info->regs)); + + /* Select channel for S3C2416 */ + writel(addr, ADC_S3C2410_MUX(info->regs)); + + con1 = readl(ADC_V1_CON(info->regs)); + writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); +} + +static struct exynos_adc_data const exynos_adc_s3c2416_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .start_conv = exynos_adc_s3c2416_start_conv, +}; + +static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info, + unsigned long addr) +{ + u32 con1; + + /* Select channel for S3C2433 */ + writel(addr, ADC_S3C2410_MUX(info->regs)); + + con1 = readl(ADC_V1_CON(info->regs)); + writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); +} + +static struct exynos_adc_data const exynos_adc_s3c2443_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .start_conv = exynos_adc_s3c2443_start_conv, +}; + +static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info, + unsigned long addr) +{ + u32 con1; + + con1 = readl(ADC_V1_CON(info->regs)); + con1 &= ~ADC_S3C2410_CON_SELMUX(0x7); + con1 |= ADC_S3C2410_CON_SELMUX(addr); + writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); +} + +static struct exynos_adc_data const exynos_adc_s3c24xx_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .start_conv = exynos_adc_s3c64xx_start_conv, +}; + +static struct exynos_adc_data const exynos_adc_s3c64xx_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .clear_irq = exynos_adc_v1_clear_irq, + .start_conv = exynos_adc_s3c64xx_start_conv, +}; + +static void exynos_adc_v2_init_hw(struct exynos_adc *info) +{ + u32 con1, con2; + + if (info->data->needs_adc_phy) + regmap_write(info->pmu_map, info->data->phy_offset, 1); + + con1 = ADC_V2_CON1_SOFT_RESET; + writel(con1, ADC_V2_CON1(info->regs)); + + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); + writel(con2, ADC_V2_CON2(info->regs)); + + /* Enable interrupts */ + writel(1, ADC_V2_INT_EN(info->regs)); +} + +static void exynos_adc_v2_exit_hw(struct exynos_adc *info) +{ + u32 con; + + if (info->data->needs_adc_phy) + regmap_write(info->pmu_map, info->data->phy_offset, 0); + + con = readl(ADC_V2_CON1(info->regs)); + con &= ~ADC_CON_EN_START; + writel(con, ADC_V2_CON1(info->regs)); +} + +static void exynos_adc_v2_clear_irq(struct exynos_adc *info) +{ + writel(1, ADC_V2_INT_ST(info->regs)); +} + +static void exynos_adc_v2_start_conv(struct exynos_adc *info, + unsigned long addr) +{ + u32 con1, con2; + + con2 = readl(ADC_V2_CON2(info->regs)); + con2 &= ~ADC_V2_CON2_ACH_MASK; + con2 |= ADC_V2_CON2_ACH_SEL(addr); + writel(con2, ADC_V2_CON2(info->regs)); + + con1 = readl(ADC_V2_CON1(info->regs)); + writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs)); +} + +static const struct exynos_adc_data exynos_adc_v2_data = { + .num_channels = MAX_ADC_V2_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_adc_phy = true, + .phy_offset = EXYNOS_ADCV2_PHY_OFFSET, + + .init_hw = exynos_adc_v2_init_hw, + .exit_hw = exynos_adc_v2_exit_hw, + .clear_irq = exynos_adc_v2_clear_irq, + .start_conv = exynos_adc_v2_start_conv, +}; + +static const struct exynos_adc_data exynos3250_adc_data = { + .num_channels = MAX_EXYNOS3250_ADC_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_sclk = true, + .needs_adc_phy = true, + .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, + + .init_hw = exynos_adc_v2_init_hw, + .exit_hw = exynos_adc_v2_exit_hw, + .clear_irq = exynos_adc_v2_clear_irq, + .start_conv = exynos_adc_v2_start_conv, +}; + +static void exynos_adc_exynos7_init_hw(struct exynos_adc *info) +{ + u32 con1, con2; + + con1 = ADC_V2_CON1_SOFT_RESET; + writel(con1, ADC_V2_CON1(info->regs)); + + con2 = readl(ADC_V2_CON2(info->regs)); + con2 &= ~ADC_V2_CON2_C_TIME(7); + con2 |= ADC_V2_CON2_C_TIME(0); + writel(con2, ADC_V2_CON2(info->regs)); + + /* Enable interrupts */ + writel(1, ADC_V2_INT_EN(info->regs)); +} + +static const struct exynos_adc_data exynos7_adc_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + + .init_hw = exynos_adc_exynos7_init_hw, + .exit_hw = exynos_adc_v2_exit_hw, + .clear_irq = exynos_adc_v2_clear_irq, + .start_conv = exynos_adc_v2_start_conv, +}; + +static const struct of_device_id exynos_adc_match[] = { + { + .compatible = "samsung,s3c2410-adc", + .data = &exynos_adc_s3c24xx_data, + }, { + .compatible = "samsung,s3c2416-adc", + .data = &exynos_adc_s3c2416_data, + }, { + .compatible = "samsung,s3c2440-adc", + .data = &exynos_adc_s3c24xx_data, + }, { + .compatible = "samsung,s3c2443-adc", + .data = &exynos_adc_s3c2443_data, + }, { + .compatible = "samsung,s3c6410-adc", + .data = &exynos_adc_s3c64xx_data, + }, { + .compatible = "samsung,s5pv210-adc", + .data = &exynos_adc_s5pv210_data, + }, { + .compatible = "samsung,exynos4212-adc", + .data = &exynos4212_adc_data, + }, { + .compatible = "samsung,exynos-adc-v1", + .data = &exynos_adc_v1_data, + }, { + .compatible = "samsung,exynos-adc-v2", + .data = &exynos_adc_v2_data, + }, { + .compatible = "samsung,exynos3250-adc", + .data = &exynos3250_adc_data, + }, { + .compatible = "samsung,exynos7-adc", + .data = &exynos7_adc_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos_adc_match); + +static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev) +{ + const struct of_device_id *match; + + match = of_match_node(exynos_adc_match, pdev->dev.of_node); + return (struct exynos_adc_data *)match->data; +} + +static int exynos_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct exynos_adc *info = iio_priv(indio_dev); + unsigned long timeout; + int ret; + + if (mask == IIO_CHAN_INFO_SCALE) { + ret = regulator_get_voltage(info->vdd); + if (ret < 0) + return ret; + + /* Regulator voltage is in uV, but need mV */ + *val = ret / 1000; + *val2 = info->data->mask; + + return IIO_VAL_FRACTIONAL; + } else if (mask != IIO_CHAN_INFO_RAW) { + return -EINVAL; + } + + mutex_lock(&info->lock); + reinit_completion(&info->completion); + + /* Select the channel to be used and Trigger conversion */ + if (info->data->start_conv) + info->data->start_conv(info, chan->address); + + timeout = wait_for_completion_timeout(&info->completion, + EXYNOS_ADC_TIMEOUT); + if (timeout == 0) { + dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); + if (info->data->init_hw) + info->data->init_hw(info); + ret = -ETIMEDOUT; + } else { + *val = info->value; + *val2 = 0; + ret = IIO_VAL_INT; + } + + mutex_unlock(&info->lock); + + return ret; +} + +static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y) +{ + struct exynos_adc *info = iio_priv(indio_dev); + unsigned long timeout; + int ret; + + mutex_lock(&info->lock); + info->read_ts = true; + + reinit_completion(&info->completion); + + writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST, + ADC_V1_TSC(info->regs)); + + /* Select the ts channel to be used and Trigger conversion */ + info->data->start_conv(info, ADC_S3C2410_MUX_TS); + + timeout = wait_for_completion_timeout(&info->completion, + EXYNOS_ADC_TIMEOUT); + if (timeout == 0) { + dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); + if (info->data->init_hw) + info->data->init_hw(info); + ret = -ETIMEDOUT; + } else { + *x = info->ts_x; + *y = info->ts_y; + ret = 0; + } + + info->read_ts = false; + mutex_unlock(&info->lock); + + return ret; +} + +static irqreturn_t exynos_adc_isr(int irq, void *dev_id) +{ + struct exynos_adc *info = dev_id; + u32 mask = info->data->mask; + + /* Read value */ + if (info->read_ts) { + info->ts_x = readl(ADC_V1_DATX(info->regs)); + info->ts_y = readl(ADC_V1_DATY(info->regs)); + writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs)); + } else { + info->value = readl(ADC_V1_DATX(info->regs)) & mask; + } + + /* clear irq */ + if (info->data->clear_irq) + info->data->clear_irq(info); + + complete(&info->completion); + + return IRQ_HANDLED; +} + +/* + * Here we (ab)use a threaded interrupt handler to stay running + * for as long as the touchscreen remains pressed, we report + * a new event with the latest data and then sleep until the + * next timer tick. This mirrors the behavior of the old + * driver, with much less code. + */ +static irqreturn_t exynos_ts_isr(int irq, void *dev_id) +{ + struct exynos_adc *info = dev_id; + struct iio_dev *dev = dev_get_drvdata(info->dev); + u32 x, y; + bool pressed; + int ret; + + while (READ_ONCE(info->ts_enabled)) { + ret = exynos_read_s3c64xx_ts(dev, &x, &y); + if (ret == -ETIMEDOUT) + break; + + pressed = x & y & ADC_DATX_PRESSED; + if (!pressed) { + input_report_key(info->input, BTN_TOUCH, 0); + input_sync(info->input); + break; + } + + input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK); + input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK); + input_report_key(info->input, BTN_TOUCH, 1); + input_sync(info->input); + + usleep_range(1000, 1100); + } + + writel(0, ADC_V1_CLRINTPNDNUP(info->regs)); + + return IRQ_HANDLED; +} + +static int exynos_adc_reg_access(struct iio_dev *indio_dev, + unsigned reg, unsigned writeval, + unsigned *readval) +{ + struct exynos_adc *info = iio_priv(indio_dev); + + if (readval == NULL) + return -EINVAL; + + *readval = readl(info->regs + reg); + + return 0; +} + +static const struct iio_info exynos_adc_iio_info = { + .read_raw = &exynos_read_raw, + .debugfs_reg_access = &exynos_adc_reg_access, +}; + +#define ADC_CHANNEL(_index, _id) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = _index, \ + .address = _index, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ + .datasheet_name = _id, \ +} + +static const struct iio_chan_spec exynos_adc_iio_channels[] = { + ADC_CHANNEL(0, "adc0"), + ADC_CHANNEL(1, "adc1"), + ADC_CHANNEL(2, "adc2"), + ADC_CHANNEL(3, "adc3"), + ADC_CHANNEL(4, "adc4"), + ADC_CHANNEL(5, "adc5"), + ADC_CHANNEL(6, "adc6"), + ADC_CHANNEL(7, "adc7"), + ADC_CHANNEL(8, "adc8"), + ADC_CHANNEL(9, "adc9"), +}; + +static int exynos_adc_remove_devices(struct device *dev, void *c) +{ + struct platform_device *pdev = to_platform_device(dev); + + platform_device_unregister(pdev); + + return 0; +} + +static int exynos_adc_ts_open(struct input_dev *dev) +{ + struct exynos_adc *info = input_get_drvdata(dev); + + WRITE_ONCE(info->ts_enabled, true); + enable_irq(info->tsirq); + + return 0; +} + +static void exynos_adc_ts_close(struct input_dev *dev) +{ + struct exynos_adc *info = input_get_drvdata(dev); + + WRITE_ONCE(info->ts_enabled, false); + disable_irq(info->tsirq); +} + +static int exynos_adc_ts_init(struct exynos_adc *info) +{ + int ret; + + if (info->tsirq <= 0) + return -ENODEV; + + info->input = input_allocate_device(); + if (!info->input) + return -ENOMEM; + + info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0); + input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0); + + info->input->name = "S3C24xx TouchScreen"; + info->input->id.bustype = BUS_HOST; + info->input->open = exynos_adc_ts_open; + info->input->close = exynos_adc_ts_close; + + input_set_drvdata(info->input, info); + + ret = input_register_device(info->input); + if (ret) { + input_free_device(info->input); + return ret; + } + + ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + "touchscreen", info); + if (ret) + input_unregister_device(info->input); + + return ret; +} + +static int exynos_adc_probe(struct platform_device *pdev) +{ + struct exynos_adc *info = NULL; + struct device_node *np = pdev->dev.of_node; + struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev); + struct iio_dev *indio_dev = NULL; + bool has_ts = false; + int ret; + int irq; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + + info->data = exynos_adc_get_data(pdev); + if (!info->data) { + dev_err(&pdev->dev, "failed getting exynos_adc_data\n"); + return -EINVAL; + } + + info->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + + if (info->data->needs_adc_phy) { + info->pmu_map = syscon_regmap_lookup_by_phandle( + pdev->dev.of_node, + "samsung,syscon-phandle"); + if (IS_ERR(info->pmu_map)) { + dev_err(&pdev->dev, "syscon regmap lookup failed.\n"); + return PTR_ERR(info->pmu_map); + } + } + + /* leave out any TS related code if unreachable */ + if (IS_REACHABLE(CONFIG_INPUT)) { + has_ts = of_property_read_bool(pdev->dev.of_node, + "has-touchscreen") || pdata; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + info->irq = irq; + + if (has_ts) { + irq = platform_get_irq(pdev, 1); + if (irq == -EPROBE_DEFER) + return irq; + + info->tsirq = irq; + } else { + info->tsirq = -1; + } + + info->dev = &pdev->dev; + + init_completion(&info->completion); + + info->clk = devm_clk_get(&pdev->dev, "adc"); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "failed getting clock, err = %ld\n", + PTR_ERR(info->clk)); + return PTR_ERR(info->clk); + } + + if (info->data->needs_sclk) { + info->sclk = devm_clk_get(&pdev->dev, "sclk"); + if (IS_ERR(info->sclk)) { + dev_err(&pdev->dev, + "failed getting sclk clock, err = %ld\n", + PTR_ERR(info->sclk)); + return PTR_ERR(info->sclk); + } + } + + info->vdd = devm_regulator_get(&pdev->dev, "vdd"); + if (IS_ERR(info->vdd)) + return dev_err_probe(&pdev->dev, PTR_ERR(info->vdd), + "failed getting regulator"); + + ret = regulator_enable(info->vdd); + if (ret) + return ret; + + ret = exynos_adc_prepare_clk(info); + if (ret) + goto err_disable_reg; + + ret = exynos_adc_enable_clk(info); + if (ret) + goto err_unprepare_clk; + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->info = &exynos_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = exynos_adc_iio_channels; + indio_dev->num_channels = info->data->num_channels; + + mutex_init(&info->lock); + + ret = request_irq(info->irq, exynos_adc_isr, + 0, dev_name(&pdev->dev), info); + if (ret < 0) { + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", + info->irq); + goto err_disable_clk; + } + + ret = iio_device_register(indio_dev); + if (ret) + goto err_irq; + + if (info->data->init_hw) + info->data->init_hw(info); + + if (pdata) + info->delay = pdata->delay; + else + info->delay = 10000; + + if (has_ts) + ret = exynos_adc_ts_init(info); + if (ret) + goto err_iio; + + ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed adding child nodes\n"); + goto err_of_populate; + } + + return 0; + +err_of_populate: + device_for_each_child(&indio_dev->dev, NULL, + exynos_adc_remove_devices); + if (has_ts) { + input_unregister_device(info->input); + free_irq(info->tsirq, info); + } +err_iio: + iio_device_unregister(indio_dev); +err_irq: + free_irq(info->irq, info); +err_disable_clk: + if (info->data->exit_hw) + info->data->exit_hw(info); + exynos_adc_disable_clk(info); +err_unprepare_clk: + exynos_adc_unprepare_clk(info); +err_disable_reg: + regulator_disable(info->vdd); + return ret; +} + +static int exynos_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct exynos_adc *info = iio_priv(indio_dev); + + if (IS_REACHABLE(CONFIG_INPUT) && info->input) { + free_irq(info->tsirq, info); + input_unregister_device(info->input); + } + device_for_each_child(&indio_dev->dev, NULL, + exynos_adc_remove_devices); + iio_device_unregister(indio_dev); + free_irq(info->irq, info); + if (info->data->exit_hw) + info->data->exit_hw(info); + exynos_adc_disable_clk(info); + exynos_adc_unprepare_clk(info); + regulator_disable(info->vdd); + + return 0; +} + +static int exynos_adc_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct exynos_adc *info = iio_priv(indio_dev); + + if (info->data->exit_hw) + info->data->exit_hw(info); + exynos_adc_disable_clk(info); + regulator_disable(info->vdd); + + return 0; +} + +static int exynos_adc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct exynos_adc *info = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(info->vdd); + if (ret) + return ret; + + ret = exynos_adc_enable_clk(info); + if (ret) + return ret; + + if (info->data->init_hw) + info->data->init_hw(info); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, exynos_adc_suspend, + exynos_adc_resume); + +static struct platform_driver exynos_adc_driver = { + .probe = exynos_adc_probe, + .remove = exynos_adc_remove, + .driver = { + .name = "exynos-adc", + .of_match_table = exynos_adc_match, + .pm = pm_sleep_ptr(&exynos_adc_pm_ops), + }, +}; + +module_platform_driver(exynos_adc_driver); + +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>"); +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); +MODULE_LICENSE("GPL v2"); |