diff options
Diffstat (limited to 'drivers/iio/light/veml6030.c')
| -rw-r--r-- | drivers/iio/light/veml6030.c | 903 |
1 files changed, 903 insertions, 0 deletions
diff --git a/drivers/iio/light/veml6030.c b/drivers/iio/light/veml6030.c new file mode 100644 index 000000000..9a7800cdf --- /dev/null +++ b/drivers/iio/light/veml6030.c @@ -0,0 +1,903 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * VEML6030 Ambient Light Sensor + * + * Copyright (c) 2019, Rishi Gupta <gupt21@gmail.com> + * + * Datasheet: https://www.vishay.com/docs/84366/veml6030.pdf + * Appnote-84367: https://www.vishay.com/docs/84367/designingveml6030.pdf + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/regmap.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> + +/* Device registers */ +#define VEML6030_REG_ALS_CONF 0x00 +#define VEML6030_REG_ALS_WH 0x01 +#define VEML6030_REG_ALS_WL 0x02 +#define VEML6030_REG_ALS_PSM 0x03 +#define VEML6030_REG_ALS_DATA 0x04 +#define VEML6030_REG_WH_DATA 0x05 +#define VEML6030_REG_ALS_INT 0x06 + +/* Bit masks for specific functionality */ +#define VEML6030_ALS_IT GENMASK(9, 6) +#define VEML6030_PSM GENMASK(2, 1) +#define VEML6030_ALS_PERS GENMASK(5, 4) +#define VEML6030_ALS_GAIN GENMASK(12, 11) +#define VEML6030_PSM_EN BIT(0) +#define VEML6030_INT_TH_LOW BIT(15) +#define VEML6030_INT_TH_HIGH BIT(14) +#define VEML6030_ALS_INT_EN BIT(1) +#define VEML6030_ALS_SD BIT(0) + +/* + * The resolution depends on both gain and integration time. The + * cur_resolution stores one of the resolution mentioned in the + * table during startup and gets updated whenever integration time + * or gain is changed. + * + * Table 'resolution and maximum detection range' in appnote 84367 + * is visualized as a 2D array. The cur_gain stores index of gain + * in this table (0-3) while the cur_integration_time holds index + * of integration time (0-5). + */ +struct veml6030_data { + struct i2c_client *client; + struct regmap *regmap; + int cur_resolution; + int cur_gain; + int cur_integration_time; +}; + +/* Integration time available in seconds */ +static IIO_CONST_ATTR(in_illuminance_integration_time_available, + "0.025 0.05 0.1 0.2 0.4 0.8"); + +/* + * Scale is 1/gain. Value 0.125 is ALS gain x (1/8), 0.25 is + * ALS gain x (1/4), 1.0 = ALS gain x 1 and 2.0 is ALS gain x 2. + */ +static IIO_CONST_ATTR(in_illuminance_scale_available, + "0.125 0.25 1.0 2.0"); + +static struct attribute *veml6030_attributes[] = { + &iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr, + &iio_const_attr_in_illuminance_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group veml6030_attr_group = { + .attrs = veml6030_attributes, +}; + +/* + * Persistence = 1/2/4/8 x integration time + * Minimum time for which light readings must stay above configured + * threshold to assert the interrupt. + */ +static const char * const period_values[] = { + "0.1 0.2 0.4 0.8", + "0.2 0.4 0.8 1.6", + "0.4 0.8 1.6 3.2", + "0.8 1.6 3.2 6.4", + "0.05 0.1 0.2 0.4", + "0.025 0.050 0.1 0.2" +}; + +/* + * Return list of valid period values in seconds corresponding to + * the currently active integration time. + */ +static ssize_t in_illuminance_period_available_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret, reg, x; + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct veml6030_data *data = iio_priv(indio_dev); + + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); + if (ret) { + dev_err(&data->client->dev, + "can't read als conf register %d\n", ret); + return ret; + } + + ret = ((reg >> 6) & 0xF); + switch (ret) { + case 0: + case 1: + case 2: + case 3: + x = ret; + break; + case 8: + x = 4; + break; + case 12: + x = 5; + break; + default: + return -EINVAL; + } + + return sysfs_emit(buf, "%s\n", period_values[x]); +} + +static IIO_DEVICE_ATTR_RO(in_illuminance_period_available, 0); + +static struct attribute *veml6030_event_attributes[] = { + &iio_dev_attr_in_illuminance_period_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group veml6030_event_attr_group = { + .attrs = veml6030_event_attributes, +}; + +static int veml6030_als_pwr_on(struct veml6030_data *data) +{ + return regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, + VEML6030_ALS_SD, 0); +} + +static int veml6030_als_shut_down(struct veml6030_data *data) +{ + return regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, + VEML6030_ALS_SD, 1); +} + +static void veml6030_als_shut_down_action(void *data) +{ + veml6030_als_shut_down(data); +} + +static const struct iio_event_spec veml6030_event_spec[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_VALUE), + }, { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_ENABLE), + }, +}; + +/* Channel number */ +enum veml6030_chan { + CH_ALS, + CH_WHITE, +}; + +static const struct iio_chan_spec veml6030_channels[] = { + { + .type = IIO_LIGHT, + .channel = CH_ALS, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_INT_TIME) | + BIT(IIO_CHAN_INFO_SCALE), + .event_spec = veml6030_event_spec, + .num_event_specs = ARRAY_SIZE(veml6030_event_spec), + }, + { + .type = IIO_INTENSITY, + .channel = CH_WHITE, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_BOTH, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_PROCESSED), + }, +}; + +static const struct regmap_config veml6030_regmap_config = { + .name = "veml6030_regmap", + .reg_bits = 8, + .val_bits = 16, + .max_register = VEML6030_REG_ALS_INT, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int veml6030_get_intgrn_tm(struct iio_dev *indio_dev, + int *val, int *val2) +{ + int ret, reg; + struct veml6030_data *data = iio_priv(indio_dev); + + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); + if (ret) { + dev_err(&data->client->dev, + "can't read als conf register %d\n", ret); + return ret; + } + + switch ((reg >> 6) & 0xF) { + case 0: + *val2 = 100000; + break; + case 1: + *val2 = 200000; + break; + case 2: + *val2 = 400000; + break; + case 3: + *val2 = 800000; + break; + case 8: + *val2 = 50000; + break; + case 12: + *val2 = 25000; + break; + default: + return -EINVAL; + } + + *val = 0; + return IIO_VAL_INT_PLUS_MICRO; +} + +static int veml6030_set_intgrn_tm(struct iio_dev *indio_dev, + int val, int val2) +{ + int ret, new_int_time, int_idx; + struct veml6030_data *data = iio_priv(indio_dev); + + if (val) + return -EINVAL; + + switch (val2) { + case 25000: + new_int_time = 0x300; + int_idx = 5; + break; + case 50000: + new_int_time = 0x200; + int_idx = 4; + break; + case 100000: + new_int_time = 0x00; + int_idx = 3; + break; + case 200000: + new_int_time = 0x40; + int_idx = 2; + break; + case 400000: + new_int_time = 0x80; + int_idx = 1; + break; + case 800000: + new_int_time = 0xC0; + int_idx = 0; + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, + VEML6030_ALS_IT, new_int_time); + if (ret) { + dev_err(&data->client->dev, + "can't update als integration time %d\n", ret); + return ret; + } + + /* + * Cache current integration time and update resolution. For every + * increase in integration time to next level, resolution is halved + * and vice-versa. + */ + if (data->cur_integration_time < int_idx) + data->cur_resolution <<= int_idx - data->cur_integration_time; + else if (data->cur_integration_time > int_idx) + data->cur_resolution >>= data->cur_integration_time - int_idx; + + data->cur_integration_time = int_idx; + + return ret; +} + +static int veml6030_read_persistence(struct iio_dev *indio_dev, + int *val, int *val2) +{ + int ret, reg, period, x, y; + struct veml6030_data *data = iio_priv(indio_dev); + + ret = veml6030_get_intgrn_tm(indio_dev, &x, &y); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); + if (ret) { + dev_err(&data->client->dev, + "can't read als conf register %d\n", ret); + } + + /* integration time multiplied by 1/2/4/8 */ + period = y * (1 << ((reg >> 4) & 0x03)); + + *val = period / 1000000; + *val2 = period % 1000000; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int veml6030_write_persistence(struct iio_dev *indio_dev, + int val, int val2) +{ + int ret, period, x, y; + struct veml6030_data *data = iio_priv(indio_dev); + + ret = veml6030_get_intgrn_tm(indio_dev, &x, &y); + if (ret < 0) + return ret; + + if (!val) { + period = val2 / y; + } else { + if ((val == 1) && (val2 == 600000)) + period = 1600000 / y; + else if ((val == 3) && (val2 == 200000)) + period = 3200000 / y; + else if ((val == 6) && (val2 == 400000)) + period = 6400000 / y; + else + period = -1; + } + + if (period <= 0 || period > 8 || hweight8(period) != 1) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, + VEML6030_ALS_PERS, (ffs(period) - 1) << 4); + if (ret) + dev_err(&data->client->dev, + "can't set persistence value %d\n", ret); + + return ret; +} + +static int veml6030_set_als_gain(struct iio_dev *indio_dev, + int val, int val2) +{ + int ret, new_gain, gain_idx; + struct veml6030_data *data = iio_priv(indio_dev); + + if (val == 0 && val2 == 125000) { + new_gain = 0x1000; /* 0x02 << 11 */ + gain_idx = 3; + } else if (val == 0 && val2 == 250000) { + new_gain = 0x1800; + gain_idx = 2; + } else if (val == 1 && val2 == 0) { + new_gain = 0x00; + gain_idx = 1; + } else if (val == 2 && val2 == 0) { + new_gain = 0x800; + gain_idx = 0; + } else { + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, + VEML6030_ALS_GAIN, new_gain); + if (ret) { + dev_err(&data->client->dev, + "can't set als gain %d\n", ret); + return ret; + } + + /* + * Cache currently set gain & update resolution. For every + * increase in the gain to next level, resolution is halved + * and vice-versa. + */ + if (data->cur_gain < gain_idx) + data->cur_resolution <<= gain_idx - data->cur_gain; + else if (data->cur_gain > gain_idx) + data->cur_resolution >>= data->cur_gain - gain_idx; + + data->cur_gain = gain_idx; + + return ret; +} + +static int veml6030_get_als_gain(struct iio_dev *indio_dev, + int *val, int *val2) +{ + int ret, reg; + struct veml6030_data *data = iio_priv(indio_dev); + + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); + if (ret) { + dev_err(&data->client->dev, + "can't read als conf register %d\n", ret); + return ret; + } + + switch ((reg >> 11) & 0x03) { + case 0: + *val = 1; + *val2 = 0; + break; + case 1: + *val = 2; + *val2 = 0; + break; + case 2: + *val = 0; + *val2 = 125000; + break; + case 3: + *val = 0; + *val2 = 250000; + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int veml6030_read_thresh(struct iio_dev *indio_dev, + int *val, int *val2, int dir) +{ + int ret, reg; + struct veml6030_data *data = iio_priv(indio_dev); + + if (dir == IIO_EV_DIR_RISING) + ret = regmap_read(data->regmap, VEML6030_REG_ALS_WH, ®); + else + ret = regmap_read(data->regmap, VEML6030_REG_ALS_WL, ®); + if (ret) { + dev_err(&data->client->dev, + "can't read als threshold value %d\n", ret); + return ret; + } + + *val = reg & 0xffff; + return IIO_VAL_INT; +} + +static int veml6030_write_thresh(struct iio_dev *indio_dev, + int val, int val2, int dir) +{ + int ret; + struct veml6030_data *data = iio_priv(indio_dev); + + if (val > 0xFFFF || val < 0 || val2) + return -EINVAL; + + if (dir == IIO_EV_DIR_RISING) { + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WH, val); + if (ret) + dev_err(&data->client->dev, + "can't set high threshold %d\n", ret); + } else { + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WL, val); + if (ret) + dev_err(&data->client->dev, + "can't set low threshold %d\n", ret); + } + + return ret; +} + +/* + * Provide both raw as well as light reading in lux. + * light (in lux) = resolution * raw reading + */ +static int veml6030_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret, reg; + struct veml6030_data *data = iio_priv(indio_dev); + struct regmap *regmap = data->regmap; + struct device *dev = &data->client->dev; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_LIGHT: + ret = regmap_read(regmap, VEML6030_REG_ALS_DATA, ®); + if (ret < 0) { + dev_err(dev, "can't read als data %d\n", ret); + return ret; + } + if (mask == IIO_CHAN_INFO_PROCESSED) { + *val = (reg * data->cur_resolution) / 10000; + *val2 = (reg * data->cur_resolution) % 10000; + return IIO_VAL_INT_PLUS_MICRO; + } + *val = reg; + return IIO_VAL_INT; + case IIO_INTENSITY: + ret = regmap_read(regmap, VEML6030_REG_WH_DATA, ®); + if (ret < 0) { + dev_err(dev, "can't read white data %d\n", ret); + return ret; + } + if (mask == IIO_CHAN_INFO_PROCESSED) { + *val = (reg * data->cur_resolution) / 10000; + *val2 = (reg * data->cur_resolution) % 10000; + return IIO_VAL_INT_PLUS_MICRO; + } + *val = reg; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_INT_TIME: + if (chan->type == IIO_LIGHT) + return veml6030_get_intgrn_tm(indio_dev, val, val2); + return -EINVAL; + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_LIGHT) + return veml6030_get_als_gain(indio_dev, val, val2); + return -EINVAL; + default: + return -EINVAL; + } +} + +static int veml6030_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + switch (chan->type) { + case IIO_LIGHT: + return veml6030_set_intgrn_tm(indio_dev, val, val2); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_LIGHT: + return veml6030_set_als_gain(indio_dev, val, val2); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int veml6030_read_event_val(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, enum iio_event_type type, + enum iio_event_direction dir, enum iio_event_info info, + int *val, int *val2) +{ + switch (info) { + case IIO_EV_INFO_VALUE: + switch (dir) { + case IIO_EV_DIR_RISING: + case IIO_EV_DIR_FALLING: + return veml6030_read_thresh(indio_dev, val, val2, dir); + default: + return -EINVAL; + } + break; + case IIO_EV_INFO_PERIOD: + return veml6030_read_persistence(indio_dev, val, val2); + default: + return -EINVAL; + } +} + +static int veml6030_write_event_val(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, enum iio_event_type type, + enum iio_event_direction dir, enum iio_event_info info, + int val, int val2) +{ + switch (info) { + case IIO_EV_INFO_VALUE: + return veml6030_write_thresh(indio_dev, val, val2, dir); + case IIO_EV_INFO_PERIOD: + return veml6030_write_persistence(indio_dev, val, val2); + default: + return -EINVAL; + } +} + +static int veml6030_read_interrupt_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, enum iio_event_type type, + enum iio_event_direction dir) +{ + int ret, reg; + struct veml6030_data *data = iio_priv(indio_dev); + + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); + if (ret) { + dev_err(&data->client->dev, + "can't read als conf register %d\n", ret); + return ret; + } + + if (reg & VEML6030_ALS_INT_EN) + return 1; + else + return 0; +} + +/* + * Sensor should not be measuring light when interrupt is configured. + * Therefore correct sequence to configure interrupt functionality is: + * shut down -> enable/disable interrupt -> power on + * + * state = 1 enables interrupt, state = 0 disables interrupt + */ +static int veml6030_write_interrupt_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, enum iio_event_type type, + enum iio_event_direction dir, int state) +{ + int ret; + struct veml6030_data *data = iio_priv(indio_dev); + + if (state < 0 || state > 1) + return -EINVAL; + + ret = veml6030_als_shut_down(data); + if (ret < 0) { + dev_err(&data->client->dev, + "can't disable als to configure interrupt %d\n", ret); + return ret; + } + + /* enable interrupt + power on */ + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, + VEML6030_ALS_INT_EN | VEML6030_ALS_SD, state << 1); + if (ret) + dev_err(&data->client->dev, + "can't enable interrupt & poweron als %d\n", ret); + + return ret; +} + +static const struct iio_info veml6030_info = { + .read_raw = veml6030_read_raw, + .write_raw = veml6030_write_raw, + .read_event_value = veml6030_read_event_val, + .write_event_value = veml6030_write_event_val, + .read_event_config = veml6030_read_interrupt_config, + .write_event_config = veml6030_write_interrupt_config, + .attrs = &veml6030_attr_group, + .event_attrs = &veml6030_event_attr_group, +}; + +static const struct iio_info veml6030_info_no_irq = { + .read_raw = veml6030_read_raw, + .write_raw = veml6030_write_raw, + .attrs = &veml6030_attr_group, +}; + +static irqreturn_t veml6030_event_handler(int irq, void *private) +{ + int ret, reg, evtdir; + struct iio_dev *indio_dev = private; + struct veml6030_data *data = iio_priv(indio_dev); + + ret = regmap_read(data->regmap, VEML6030_REG_ALS_INT, ®); + if (ret) { + dev_err(&data->client->dev, + "can't read als interrupt register %d\n", ret); + return IRQ_HANDLED; + } + + /* Spurious interrupt handling */ + if (!(reg & (VEML6030_INT_TH_HIGH | VEML6030_INT_TH_LOW))) + return IRQ_NONE; + + if (reg & VEML6030_INT_TH_HIGH) + evtdir = IIO_EV_DIR_RISING; + else + evtdir = IIO_EV_DIR_FALLING; + + iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, + 0, IIO_EV_TYPE_THRESH, evtdir), + iio_get_time_ns(indio_dev)); + + return IRQ_HANDLED; +} + +/* + * Set ALS gain to 1/8, integration time to 100 ms, PSM to mode 2, + * persistence to 1 x integration time and the threshold + * interrupt disabled by default. First shutdown the sensor, + * update registers and then power on the sensor. + */ +static int veml6030_hw_init(struct iio_dev *indio_dev) +{ + int ret, val; + struct veml6030_data *data = iio_priv(indio_dev); + struct i2c_client *client = data->client; + + ret = veml6030_als_shut_down(data); + if (ret) { + dev_err(&client->dev, "can't shutdown als %d\n", ret); + return ret; + } + + ret = regmap_write(data->regmap, VEML6030_REG_ALS_CONF, 0x1001); + if (ret) { + dev_err(&client->dev, "can't setup als configs %d\n", ret); + return ret; + } + + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_PSM, + VEML6030_PSM | VEML6030_PSM_EN, 0x03); + if (ret) { + dev_err(&client->dev, "can't setup default PSM %d\n", ret); + return ret; + } + + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WH, 0xFFFF); + if (ret) { + dev_err(&client->dev, "can't setup high threshold %d\n", ret); + return ret; + } + + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WL, 0x0000); + if (ret) { + dev_err(&client->dev, "can't setup low threshold %d\n", ret); + return ret; + } + + ret = veml6030_als_pwr_on(data); + if (ret) { + dev_err(&client->dev, "can't poweron als %d\n", ret); + return ret; + } + + /* Wait 4 ms to let processor & oscillator start correctly */ + usleep_range(4000, 4002); + + /* Clear stale interrupt status bits if any during start */ + ret = regmap_read(data->regmap, VEML6030_REG_ALS_INT, &val); + if (ret < 0) { + dev_err(&client->dev, + "can't clear als interrupt status %d\n", ret); + return ret; + } + + /* Cache currently active measurement parameters */ + data->cur_gain = 3; + data->cur_resolution = 4608; + data->cur_integration_time = 3; + + return ret; +} + +static int veml6030_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct veml6030_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c adapter doesn't support plain i2c\n"); + return -EOPNOTSUPP; + } + + regmap = devm_regmap_init_i2c(client, &veml6030_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "can't setup regmap\n"); + return PTR_ERR(regmap); + } + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + data->regmap = regmap; + + indio_dev->name = "veml6030"; + indio_dev->channels = veml6030_channels; + indio_dev->num_channels = ARRAY_SIZE(veml6030_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + if (client->irq) { + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, veml6030_event_handler, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "veml6030", indio_dev); + if (ret < 0) { + dev_err(&client->dev, + "irq %d request failed\n", client->irq); + return ret; + } + indio_dev->info = &veml6030_info; + } else { + indio_dev->info = &veml6030_info_no_irq; + } + + ret = veml6030_hw_init(indio_dev); + if (ret < 0) + return ret; + + ret = devm_add_action_or_reset(&client->dev, + veml6030_als_shut_down_action, data); + if (ret < 0) + return ret; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static int veml6030_runtime_suspend(struct device *dev) +{ + int ret; + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct veml6030_data *data = iio_priv(indio_dev); + + ret = veml6030_als_shut_down(data); + if (ret < 0) + dev_err(&data->client->dev, "can't suspend als %d\n", ret); + + return ret; +} + +static int veml6030_runtime_resume(struct device *dev) +{ + int ret; + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct veml6030_data *data = iio_priv(indio_dev); + + ret = veml6030_als_pwr_on(data); + if (ret < 0) + dev_err(&data->client->dev, "can't resume als %d\n", ret); + + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(veml6030_pm_ops, veml6030_runtime_suspend, + veml6030_runtime_resume, NULL); + +static const struct of_device_id veml6030_of_match[] = { + { .compatible = "vishay,veml6030" }, + { } +}; +MODULE_DEVICE_TABLE(of, veml6030_of_match); + +static const struct i2c_device_id veml6030_id[] = { + { "veml6030", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, veml6030_id); + +static struct i2c_driver veml6030_driver = { + .driver = { + .name = "veml6030", + .of_match_table = veml6030_of_match, + .pm = pm_ptr(&veml6030_pm_ops), + }, + .probe = veml6030_probe, + .id_table = veml6030_id, +}; +module_i2c_driver(veml6030_driver); + +MODULE_AUTHOR("Rishi Gupta <gupt21@gmail.com>"); +MODULE_DESCRIPTION("VEML6030 Ambient Light Sensor"); +MODULE_LICENSE("GPL v2"); |