summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib/qib_diag.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_diag.c')
-rw-r--r--drivers/infiniband/hw/qib/qib_diag.c906
1 files changed, 906 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_diag.c b/drivers/infiniband/hw/qib/qib_diag.c
new file mode 100644
index 000000000..11da796dd
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_diag.c
@@ -0,0 +1,906 @@
+/*
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file contains support for diagnostic functions. It is accessed by
+ * opening the qib_diag device, normally minor number 129. Diagnostic use
+ * of the QLogic_IB chip may render the chip or board unusable until the
+ * driver is unloaded, or in some cases, until the system is rebooted.
+ *
+ * Accesses to the chip through this interface are not similar to going
+ * through the /sys/bus/pci resource mmap interface.
+ */
+
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/vmalloc.h>
+#include <linux/export.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+
+#include "qib.h"
+#include "qib_common.h"
+
+#undef pr_fmt
+#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt
+
+/*
+ * Each client that opens the diag device must read then write
+ * offset 0, to prevent lossage from random cat or od. diag_state
+ * sequences this "handshake".
+ */
+enum diag_state { UNUSED = 0, OPENED, INIT, READY };
+
+/* State for an individual client. PID so children cannot abuse handshake */
+static struct qib_diag_client {
+ struct qib_diag_client *next;
+ struct qib_devdata *dd;
+ pid_t pid;
+ enum diag_state state;
+} *client_pool;
+
+/*
+ * Get a client struct. Recycled if possible, else kmalloc.
+ * Must be called with qib_mutex held
+ */
+static struct qib_diag_client *get_client(struct qib_devdata *dd)
+{
+ struct qib_diag_client *dc;
+
+ dc = client_pool;
+ if (dc)
+ /* got from pool remove it and use */
+ client_pool = dc->next;
+ else
+ /* None in pool, alloc and init */
+ dc = kmalloc(sizeof(*dc), GFP_KERNEL);
+
+ if (dc) {
+ dc->next = NULL;
+ dc->dd = dd;
+ dc->pid = current->pid;
+ dc->state = OPENED;
+ }
+ return dc;
+}
+
+/*
+ * Return to pool. Must be called with qib_mutex held
+ */
+static void return_client(struct qib_diag_client *dc)
+{
+ struct qib_devdata *dd = dc->dd;
+ struct qib_diag_client *tdc, *rdc;
+
+ rdc = NULL;
+ if (dc == dd->diag_client) {
+ dd->diag_client = dc->next;
+ rdc = dc;
+ } else {
+ tdc = dc->dd->diag_client;
+ while (tdc) {
+ if (dc == tdc->next) {
+ tdc->next = dc->next;
+ rdc = dc;
+ break;
+ }
+ tdc = tdc->next;
+ }
+ }
+ if (rdc) {
+ rdc->state = UNUSED;
+ rdc->dd = NULL;
+ rdc->pid = 0;
+ rdc->next = client_pool;
+ client_pool = rdc;
+ }
+}
+
+static int qib_diag_open(struct inode *in, struct file *fp);
+static int qib_diag_release(struct inode *in, struct file *fp);
+static ssize_t qib_diag_read(struct file *fp, char __user *data,
+ size_t count, loff_t *off);
+static ssize_t qib_diag_write(struct file *fp, const char __user *data,
+ size_t count, loff_t *off);
+
+static const struct file_operations diag_file_ops = {
+ .owner = THIS_MODULE,
+ .write = qib_diag_write,
+ .read = qib_diag_read,
+ .open = qib_diag_open,
+ .release = qib_diag_release,
+ .llseek = default_llseek,
+};
+
+static atomic_t diagpkt_count = ATOMIC_INIT(0);
+static struct cdev *diagpkt_cdev;
+static struct device *diagpkt_device;
+
+static ssize_t qib_diagpkt_write(struct file *fp, const char __user *data,
+ size_t count, loff_t *off);
+
+static const struct file_operations diagpkt_file_ops = {
+ .owner = THIS_MODULE,
+ .write = qib_diagpkt_write,
+ .llseek = noop_llseek,
+};
+
+int qib_diag_add(struct qib_devdata *dd)
+{
+ char name[16];
+ int ret = 0;
+
+ if (atomic_inc_return(&diagpkt_count) == 1) {
+ ret = qib_cdev_init(QIB_DIAGPKT_MINOR, "ipath_diagpkt",
+ &diagpkt_file_ops, &diagpkt_cdev,
+ &diagpkt_device);
+ if (ret)
+ goto done;
+ }
+
+ snprintf(name, sizeof(name), "ipath_diag%d", dd->unit);
+ ret = qib_cdev_init(QIB_DIAG_MINOR_BASE + dd->unit, name,
+ &diag_file_ops, &dd->diag_cdev,
+ &dd->diag_device);
+done:
+ return ret;
+}
+
+static void qib_unregister_observers(struct qib_devdata *dd);
+
+void qib_diag_remove(struct qib_devdata *dd)
+{
+ struct qib_diag_client *dc;
+
+ if (atomic_dec_and_test(&diagpkt_count))
+ qib_cdev_cleanup(&diagpkt_cdev, &diagpkt_device);
+
+ qib_cdev_cleanup(&dd->diag_cdev, &dd->diag_device);
+
+ /*
+ * Return all diag_clients of this device. There should be none,
+ * as we are "guaranteed" that no clients are still open
+ */
+ while (dd->diag_client)
+ return_client(dd->diag_client);
+
+ /* Now clean up all unused client structs */
+ while (client_pool) {
+ dc = client_pool;
+ client_pool = dc->next;
+ kfree(dc);
+ }
+ /* Clean up observer list */
+ qib_unregister_observers(dd);
+}
+
+/* qib_remap_ioaddr32 - remap an offset into chip address space to __iomem *
+ *
+ * @dd: the qlogic_ib device
+ * @offs: the offset in chip-space
+ * @cntp: Pointer to max (byte) count for transfer starting at offset
+ * This returns a u32 __iomem * so it can be used for both 64 and 32-bit
+ * mapping. It is needed because with the use of PAT for control of
+ * write-combining, the logically contiguous address-space of the chip
+ * may be split into virtually non-contiguous spaces, with different
+ * attributes, which are them mapped to contiguous physical space
+ * based from the first BAR.
+ *
+ * The code below makes the same assumptions as were made in
+ * init_chip_wc_pat() (qib_init.c), copied here:
+ * Assumes chip address space looks like:
+ * - kregs + sregs + cregs + uregs (in any order)
+ * - piobufs (2K and 4K bufs in either order)
+ * or:
+ * - kregs + sregs + cregs (in any order)
+ * - piobufs (2K and 4K bufs in either order)
+ * - uregs
+ *
+ * If cntp is non-NULL, returns how many bytes from offset can be accessed
+ * Returns 0 if the offset is not mapped.
+ */
+static u32 __iomem *qib_remap_ioaddr32(struct qib_devdata *dd, u32 offset,
+ u32 *cntp)
+{
+ u32 kreglen;
+ u32 snd_bottom, snd_lim = 0;
+ u32 __iomem *krb32 = (u32 __iomem *)dd->kregbase;
+ u32 __iomem *map = NULL;
+ u32 cnt = 0;
+ u32 tot4k, offs4k;
+
+ /* First, simplest case, offset is within the first map. */
+ kreglen = (dd->kregend - dd->kregbase) * sizeof(u64);
+ if (offset < kreglen) {
+ map = krb32 + (offset / sizeof(u32));
+ cnt = kreglen - offset;
+ goto mapped;
+ }
+
+ /*
+ * Next check for user regs, the next most common case,
+ * and a cheap check because if they are not in the first map
+ * they are last in chip.
+ */
+ if (dd->userbase) {
+ /* If user regs mapped, they are after send, so set limit. */
+ u32 ulim = (dd->cfgctxts * dd->ureg_align) + dd->uregbase;
+
+ if (!dd->piovl15base)
+ snd_lim = dd->uregbase;
+ krb32 = (u32 __iomem *)dd->userbase;
+ if (offset >= dd->uregbase && offset < ulim) {
+ map = krb32 + (offset - dd->uregbase) / sizeof(u32);
+ cnt = ulim - offset;
+ goto mapped;
+ }
+ }
+
+ /*
+ * Lastly, check for offset within Send Buffers.
+ * This is gnarly because struct devdata is deliberately vague
+ * about things like 7322 VL15 buffers, and we are not in
+ * chip-specific code here, so should not make many assumptions.
+ * The one we _do_ make is that the only chip that has more sndbufs
+ * than we admit is the 7322, and it has userregs above that, so
+ * we know the snd_lim.
+ */
+ /* Assume 2K buffers are first. */
+ snd_bottom = dd->pio2k_bufbase;
+ if (snd_lim == 0) {
+ u32 tot2k = dd->piobcnt2k * ALIGN(dd->piosize2k, dd->palign);
+
+ snd_lim = snd_bottom + tot2k;
+ }
+ /* If 4k buffers exist, account for them by bumping
+ * appropriate limit.
+ */
+ tot4k = dd->piobcnt4k * dd->align4k;
+ offs4k = dd->piobufbase >> 32;
+ if (dd->piobcnt4k) {
+ if (snd_bottom > offs4k)
+ snd_bottom = offs4k;
+ else {
+ /* 4k above 2k. Bump snd_lim, if needed*/
+ if (!dd->userbase || dd->piovl15base)
+ snd_lim = offs4k + tot4k;
+ }
+ }
+ /*
+ * Judgement call: can we ignore the space between SendBuffs and
+ * UserRegs, where we would like to see vl15 buffs, but not more?
+ */
+ if (offset >= snd_bottom && offset < snd_lim) {
+ offset -= snd_bottom;
+ map = (u32 __iomem *)dd->piobase + (offset / sizeof(u32));
+ cnt = snd_lim - offset;
+ }
+
+ if (!map && offs4k && dd->piovl15base) {
+ snd_lim = offs4k + tot4k + 2 * dd->align4k;
+ if (offset >= (offs4k + tot4k) && offset < snd_lim) {
+ map = (u32 __iomem *)dd->piovl15base +
+ ((offset - (offs4k + tot4k)) / sizeof(u32));
+ cnt = snd_lim - offset;
+ }
+ }
+
+mapped:
+ if (cntp)
+ *cntp = cnt;
+ return map;
+}
+
+/*
+ * qib_read_umem64 - read a 64-bit quantity from the chip into user space
+ * @dd: the qlogic_ib device
+ * @uaddr: the location to store the data in user memory
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @count: number of bytes to copy (multiple of 32 bits)
+ *
+ * This function also localizes all chip memory accesses.
+ * The copy should be written such that we read full cacheline packets
+ * from the chip. This is usually used for a single qword
+ *
+ * NOTE: This assumes the chip address is 64-bit aligned.
+ */
+static int qib_read_umem64(struct qib_devdata *dd, void __user *uaddr,
+ u32 regoffs, size_t count)
+{
+ const u64 __iomem *reg_addr;
+ const u64 __iomem *reg_end;
+ u32 limit;
+ int ret;
+
+ reg_addr = (const u64 __iomem *)qib_remap_ioaddr32(dd, regoffs, &limit);
+ if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (count >= limit)
+ count = limit;
+ reg_end = reg_addr + (count / sizeof(u64));
+
+ /* not very efficient, but it works for now */
+ while (reg_addr < reg_end) {
+ u64 data = readq(reg_addr);
+
+ if (copy_to_user(uaddr, &data, sizeof(u64))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ reg_addr++;
+ uaddr += sizeof(u64);
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+/*
+ * qib_write_umem64 - write a 64-bit quantity to the chip from user space
+ * @dd: the qlogic_ib device
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @uaddr: the source of the data in user memory
+ * @count: the number of bytes to copy (multiple of 32 bits)
+ *
+ * This is usually used for a single qword
+ * NOTE: This assumes the chip address is 64-bit aligned.
+ */
+
+static int qib_write_umem64(struct qib_devdata *dd, u32 regoffs,
+ const void __user *uaddr, size_t count)
+{
+ u64 __iomem *reg_addr;
+ const u64 __iomem *reg_end;
+ u32 limit;
+ int ret;
+
+ reg_addr = (u64 __iomem *)qib_remap_ioaddr32(dd, regoffs, &limit);
+ if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (count >= limit)
+ count = limit;
+ reg_end = reg_addr + (count / sizeof(u64));
+
+ /* not very efficient, but it works for now */
+ while (reg_addr < reg_end) {
+ u64 data;
+
+ if (copy_from_user(&data, uaddr, sizeof(data))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ writeq(data, reg_addr);
+
+ reg_addr++;
+ uaddr += sizeof(u64);
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+/*
+ * qib_read_umem32 - read a 32-bit quantity from the chip into user space
+ * @dd: the qlogic_ib device
+ * @uaddr: the location to store the data in user memory
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @count: number of bytes to copy
+ *
+ * read 32 bit values, not 64 bit; for memories that only
+ * support 32 bit reads; usually a single dword.
+ */
+static int qib_read_umem32(struct qib_devdata *dd, void __user *uaddr,
+ u32 regoffs, size_t count)
+{
+ const u32 __iomem *reg_addr;
+ const u32 __iomem *reg_end;
+ u32 limit;
+ int ret;
+
+ reg_addr = qib_remap_ioaddr32(dd, regoffs, &limit);
+ if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (count >= limit)
+ count = limit;
+ reg_end = reg_addr + (count / sizeof(u32));
+
+ /* not very efficient, but it works for now */
+ while (reg_addr < reg_end) {
+ u32 data = readl(reg_addr);
+
+ if (copy_to_user(uaddr, &data, sizeof(data))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ reg_addr++;
+ uaddr += sizeof(u32);
+
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+/*
+ * qib_write_umem32 - write a 32-bit quantity to the chip from user space
+ * @dd: the qlogic_ib device
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @uaddr: the source of the data in user memory
+ * @count: number of bytes to copy
+ *
+ * write 32 bit values, not 64 bit; for memories that only
+ * support 32 bit write; usually a single dword.
+ */
+
+static int qib_write_umem32(struct qib_devdata *dd, u32 regoffs,
+ const void __user *uaddr, size_t count)
+{
+ u32 __iomem *reg_addr;
+ const u32 __iomem *reg_end;
+ u32 limit;
+ int ret;
+
+ reg_addr = qib_remap_ioaddr32(dd, regoffs, &limit);
+ if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (count >= limit)
+ count = limit;
+ reg_end = reg_addr + (count / sizeof(u32));
+
+ while (reg_addr < reg_end) {
+ u32 data;
+
+ if (copy_from_user(&data, uaddr, sizeof(data))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ writel(data, reg_addr);
+
+ reg_addr++;
+ uaddr += sizeof(u32);
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+static int qib_diag_open(struct inode *in, struct file *fp)
+{
+ int unit = iminor(in) - QIB_DIAG_MINOR_BASE;
+ struct qib_devdata *dd;
+ struct qib_diag_client *dc;
+ int ret;
+
+ mutex_lock(&qib_mutex);
+
+ dd = qib_lookup(unit);
+
+ if (dd == NULL || !(dd->flags & QIB_PRESENT) ||
+ !dd->kregbase) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ dc = get_client(dd);
+ if (!dc) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+ dc->next = dd->diag_client;
+ dd->diag_client = dc;
+ fp->private_data = dc;
+ ret = 0;
+bail:
+ mutex_unlock(&qib_mutex);
+
+ return ret;
+}
+
+/**
+ * qib_diagpkt_write - write an IB packet
+ * @fp: the diag data device file pointer
+ * @data: qib_diag_pkt structure saying where to get the packet
+ * @count: size of data to write
+ * @off: unused by this code
+ */
+static ssize_t qib_diagpkt_write(struct file *fp,
+ const char __user *data,
+ size_t count, loff_t *off)
+{
+ u32 __iomem *piobuf;
+ u32 plen, pbufn, maxlen_reserve;
+ struct qib_diag_xpkt dp;
+ u32 *tmpbuf = NULL;
+ struct qib_devdata *dd;
+ struct qib_pportdata *ppd;
+ ssize_t ret = 0;
+
+ if (count != sizeof(dp)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (copy_from_user(&dp, data, sizeof(dp))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ dd = qib_lookup(dp.unit);
+ if (!dd || !(dd->flags & QIB_PRESENT) || !dd->kregbase) {
+ ret = -ENODEV;
+ goto bail;
+ }
+ if (!(dd->flags & QIB_INITTED)) {
+ /* no hardware, freeze, etc. */
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ if (dp.version != _DIAG_XPKT_VERS) {
+ qib_dev_err(dd, "Invalid version %u for diagpkt_write\n",
+ dp.version);
+ ret = -EINVAL;
+ goto bail;
+ }
+ /* send count must be an exact number of dwords */
+ if (dp.len & 3) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (!dp.port || dp.port > dd->num_pports) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ ppd = &dd->pport[dp.port - 1];
+
+ /*
+ * need total length before first word written, plus 2 Dwords. One Dword
+ * is for padding so we get the full user data when not aligned on
+ * a word boundary. The other Dword is to make sure we have room for the
+ * ICRC which gets tacked on later.
+ */
+ maxlen_reserve = 2 * sizeof(u32);
+ if (dp.len > ppd->ibmaxlen - maxlen_reserve) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ plen = sizeof(u32) + dp.len;
+
+ tmpbuf = vmalloc(plen);
+ if (!tmpbuf) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ if (copy_from_user(tmpbuf,
+ u64_to_user_ptr(dp.data),
+ dp.len)) {
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ plen >>= 2; /* in dwords */
+
+ if (dp.pbc_wd == 0)
+ dp.pbc_wd = plen;
+
+ piobuf = dd->f_getsendbuf(ppd, dp.pbc_wd, &pbufn);
+ if (!piobuf) {
+ ret = -EBUSY;
+ goto bail;
+ }
+ /* disarm it just to be extra sure */
+ dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbufn));
+
+ /* disable header check on pbufn for this packet */
+ dd->f_txchk_change(dd, pbufn, 1, TXCHK_CHG_TYPE_DIS1, NULL);
+
+ writeq(dp.pbc_wd, piobuf);
+ /*
+ * Copy all but the trigger word, then flush, so it's written
+ * to chip before trigger word, then write trigger word, then
+ * flush again, so packet is sent.
+ */
+ if (dd->flags & QIB_PIO_FLUSH_WC) {
+ qib_flush_wc();
+ qib_pio_copy(piobuf + 2, tmpbuf, plen - 1);
+ qib_flush_wc();
+ __raw_writel(tmpbuf[plen - 1], piobuf + plen + 1);
+ } else
+ qib_pio_copy(piobuf + 2, tmpbuf, plen);
+
+ if (dd->flags & QIB_USE_SPCL_TRIG) {
+ u32 spcl_off = (pbufn >= dd->piobcnt2k) ? 2047 : 1023;
+
+ qib_flush_wc();
+ __raw_writel(0xaebecede, piobuf + spcl_off);
+ }
+
+ /*
+ * Ensure buffer is written to the chip, then re-enable
+ * header checks (if supported by chip). The txchk
+ * code will ensure seen by chip before returning.
+ */
+ qib_flush_wc();
+ qib_sendbuf_done(dd, pbufn);
+ dd->f_txchk_change(dd, pbufn, 1, TXCHK_CHG_TYPE_ENAB1, NULL);
+
+ ret = sizeof(dp);
+
+bail:
+ vfree(tmpbuf);
+ return ret;
+}
+
+static int qib_diag_release(struct inode *in, struct file *fp)
+{
+ mutex_lock(&qib_mutex);
+ return_client(fp->private_data);
+ fp->private_data = NULL;
+ mutex_unlock(&qib_mutex);
+ return 0;
+}
+
+/*
+ * Chip-specific code calls to register its interest in
+ * a specific range.
+ */
+struct diag_observer_list_elt {
+ struct diag_observer_list_elt *next;
+ const struct diag_observer *op;
+};
+
+int qib_register_observer(struct qib_devdata *dd,
+ const struct diag_observer *op)
+{
+ struct diag_observer_list_elt *olp;
+ unsigned long flags;
+
+ if (!dd || !op)
+ return -EINVAL;
+ olp = vmalloc(sizeof(*olp));
+ if (!olp)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+ olp->op = op;
+ olp->next = dd->diag_observer_list;
+ dd->diag_observer_list = olp;
+ spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+
+ return 0;
+}
+
+/* Remove all registered observers when device is closed */
+static void qib_unregister_observers(struct qib_devdata *dd)
+{
+ struct diag_observer_list_elt *olp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+ olp = dd->diag_observer_list;
+ while (olp) {
+ /* Pop one observer, let go of lock */
+ dd->diag_observer_list = olp->next;
+ spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+ vfree(olp);
+ /* try again. */
+ spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+ olp = dd->diag_observer_list;
+ }
+ spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+}
+
+/*
+ * Find the observer, if any, for the specified address. Initial implementation
+ * is simple stack of observers. This must be called with diag transaction
+ * lock held.
+ */
+static const struct diag_observer *diag_get_observer(struct qib_devdata *dd,
+ u32 addr)
+{
+ struct diag_observer_list_elt *olp;
+ const struct diag_observer *op = NULL;
+
+ olp = dd->diag_observer_list;
+ while (olp) {
+ op = olp->op;
+ if (addr >= op->bottom && addr <= op->top)
+ break;
+ olp = olp->next;
+ }
+ if (!olp)
+ op = NULL;
+
+ return op;
+}
+
+static ssize_t qib_diag_read(struct file *fp, char __user *data,
+ size_t count, loff_t *off)
+{
+ struct qib_diag_client *dc = fp->private_data;
+ struct qib_devdata *dd = dc->dd;
+ ssize_t ret;
+
+ if (dc->pid != current->pid) {
+ ret = -EPERM;
+ goto bail;
+ }
+
+ if (count == 0)
+ ret = 0;
+ else if ((count % 4) || (*off % 4))
+ /* address or length is not 32-bit aligned, hence invalid */
+ ret = -EINVAL;
+ else if (dc->state < READY && (*off || count != 8))
+ ret = -EINVAL; /* prevent cat /dev/qib_diag* */
+ else {
+ unsigned long flags;
+ u64 data64 = 0;
+ int use_32;
+ const struct diag_observer *op;
+
+ use_32 = (count % 8) || (*off % 8);
+ ret = -1;
+ spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+ /*
+ * Check for observer on this address range.
+ * we only support a single 32 or 64-bit read
+ * via observer, currently.
+ */
+ op = diag_get_observer(dd, *off);
+ if (op) {
+ u32 offset = *off;
+
+ ret = op->hook(dd, op, offset, &data64, 0, use_32);
+ }
+ /*
+ * We need to release lock before any copy_to_user(),
+ * whether implicit in qib_read_umem* or explicit below.
+ */
+ spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+ if (!op) {
+ if (use_32)
+ /*
+ * Address or length is not 64-bit aligned;
+ * do 32-bit rd
+ */
+ ret = qib_read_umem32(dd, data, (u32) *off,
+ count);
+ else
+ ret = qib_read_umem64(dd, data, (u32) *off,
+ count);
+ } else if (ret == count) {
+ /* Below finishes case where observer existed */
+ ret = copy_to_user(data, &data64, use_32 ?
+ sizeof(u32) : sizeof(u64));
+ if (ret)
+ ret = -EFAULT;
+ }
+ }
+
+ if (ret >= 0) {
+ *off += count;
+ ret = count;
+ if (dc->state == OPENED)
+ dc->state = INIT;
+ }
+bail:
+ return ret;
+}
+
+static ssize_t qib_diag_write(struct file *fp, const char __user *data,
+ size_t count, loff_t *off)
+{
+ struct qib_diag_client *dc = fp->private_data;
+ struct qib_devdata *dd = dc->dd;
+ ssize_t ret;
+
+ if (dc->pid != current->pid) {
+ ret = -EPERM;
+ goto bail;
+ }
+
+ if (count == 0)
+ ret = 0;
+ else if ((count % 4) || (*off % 4))
+ /* address or length is not 32-bit aligned, hence invalid */
+ ret = -EINVAL;
+ else if (dc->state < READY &&
+ ((*off || count != 8) || dc->state != INIT))
+ /* No writes except second-step of init seq */
+ ret = -EINVAL; /* before any other write allowed */
+ else {
+ unsigned long flags;
+ const struct diag_observer *op = NULL;
+ int use_32 = (count % 8) || (*off % 8);
+
+ /*
+ * Check for observer on this address range.
+ * We only support a single 32 or 64-bit write
+ * via observer, currently. This helps, because
+ * we would otherwise have to jump through hoops
+ * to make "diag transaction" meaningful when we
+ * cannot do a copy_from_user while holding the lock.
+ */
+ if (count == 4 || count == 8) {
+ u64 data64;
+ u32 offset = *off;
+
+ ret = copy_from_user(&data64, data, count);
+ if (ret) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+ op = diag_get_observer(dd, *off);
+ if (op)
+ ret = op->hook(dd, op, offset, &data64, ~0Ull,
+ use_32);
+ spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+ }
+
+ if (!op) {
+ if (use_32)
+ /*
+ * Address or length is not 64-bit aligned;
+ * do 32-bit write
+ */
+ ret = qib_write_umem32(dd, (u32) *off, data,
+ count);
+ else
+ ret = qib_write_umem64(dd, (u32) *off, data,
+ count);
+ }
+ }
+
+ if (ret >= 0) {
+ *off += count;
+ ret = count;
+ if (dc->state == INIT)
+ dc->state = READY; /* all read/write OK now */
+ }
+bail:
+ return ret;
+}