summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib/qib_iba7220.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7220.c')
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7220.c4596
1 files changed, 4596 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
new file mode 100644
index 000000000..6af57067c
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -0,0 +1,4596 @@
+/*
+ * Copyright (c) 2011 - 2017 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+/*
+ * This file contains all of the code that is specific to the
+ * QLogic_IB 7220 chip (except that specific to the SerDes)
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <rdma/ib_verbs.h>
+
+#include "qib.h"
+#include "qib_7220.h"
+
+static void qib_setup_7220_setextled(struct qib_pportdata *, u32);
+static void qib_7220_handle_hwerrors(struct qib_devdata *, char *, size_t);
+static void sendctrl_7220_mod(struct qib_pportdata *ppd, u32 op);
+static u32 qib_7220_iblink_state(u64);
+static u8 qib_7220_phys_portstate(u64);
+static void qib_sdma_update_7220_tail(struct qib_pportdata *, u16);
+static void qib_set_ib_7220_lstate(struct qib_pportdata *, u16, u16);
+
+/*
+ * This file contains almost all the chip-specific register information and
+ * access functions for the QLogic QLogic_IB 7220 PCI-Express chip, with the
+ * exception of SerDes support, which in qib_sd7220.c.
+ */
+
+/* Below uses machine-generated qib_chipnum_regs.h file */
+#define KREG_IDX(regname) (QIB_7220_##regname##_OFFS / sizeof(u64))
+
+/* Use defines to tie machine-generated names to lower-case names */
+#define kr_control KREG_IDX(Control)
+#define kr_counterregbase KREG_IDX(CntrRegBase)
+#define kr_errclear KREG_IDX(ErrClear)
+#define kr_errmask KREG_IDX(ErrMask)
+#define kr_errstatus KREG_IDX(ErrStatus)
+#define kr_extctrl KREG_IDX(EXTCtrl)
+#define kr_extstatus KREG_IDX(EXTStatus)
+#define kr_gpio_clear KREG_IDX(GPIOClear)
+#define kr_gpio_mask KREG_IDX(GPIOMask)
+#define kr_gpio_out KREG_IDX(GPIOOut)
+#define kr_gpio_status KREG_IDX(GPIOStatus)
+#define kr_hrtbt_guid KREG_IDX(HRTBT_GUID)
+#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl)
+#define kr_hwerrclear KREG_IDX(HwErrClear)
+#define kr_hwerrmask KREG_IDX(HwErrMask)
+#define kr_hwerrstatus KREG_IDX(HwErrStatus)
+#define kr_ibcctrl KREG_IDX(IBCCtrl)
+#define kr_ibcddrctrl KREG_IDX(IBCDDRCtrl)
+#define kr_ibcddrstatus KREG_IDX(IBCDDRStatus)
+#define kr_ibcstatus KREG_IDX(IBCStatus)
+#define kr_ibserdesctrl KREG_IDX(IBSerDesCtrl)
+#define kr_intclear KREG_IDX(IntClear)
+#define kr_intmask KREG_IDX(IntMask)
+#define kr_intstatus KREG_IDX(IntStatus)
+#define kr_ncmodectrl KREG_IDX(IBNCModeCtrl)
+#define kr_palign KREG_IDX(PageAlign)
+#define kr_partitionkey KREG_IDX(RcvPartitionKey)
+#define kr_portcnt KREG_IDX(PortCnt)
+#define kr_rcvbthqp KREG_IDX(RcvBTHQP)
+#define kr_rcvctrl KREG_IDX(RcvCtrl)
+#define kr_rcvegrbase KREG_IDX(RcvEgrBase)
+#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt)
+#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt)
+#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize)
+#define kr_rcvhdrsize KREG_IDX(RcvHdrSize)
+#define kr_rcvpktledcnt KREG_IDX(RcvPktLEDCnt)
+#define kr_rcvtidbase KREG_IDX(RcvTIDBase)
+#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt)
+#define kr_revision KREG_IDX(Revision)
+#define kr_scratch KREG_IDX(Scratch)
+#define kr_sendbuffererror KREG_IDX(SendBufErr0)
+#define kr_sendctrl KREG_IDX(SendCtrl)
+#define kr_senddmabase KREG_IDX(SendDmaBase)
+#define kr_senddmabufmask0 KREG_IDX(SendDmaBufMask0)
+#define kr_senddmabufmask1 (KREG_IDX(SendDmaBufMask0) + 1)
+#define kr_senddmabufmask2 (KREG_IDX(SendDmaBufMask0) + 2)
+#define kr_senddmahead KREG_IDX(SendDmaHead)
+#define kr_senddmaheadaddr KREG_IDX(SendDmaHeadAddr)
+#define kr_senddmalengen KREG_IDX(SendDmaLenGen)
+#define kr_senddmastatus KREG_IDX(SendDmaStatus)
+#define kr_senddmatail KREG_IDX(SendDmaTail)
+#define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr)
+#define kr_sendpiobufbase KREG_IDX(SendBufBase)
+#define kr_sendpiobufcnt KREG_IDX(SendBufCnt)
+#define kr_sendpiosize KREG_IDX(SendBufSize)
+#define kr_sendregbase KREG_IDX(SendRegBase)
+#define kr_userregbase KREG_IDX(UserRegBase)
+#define kr_xgxs_cfg KREG_IDX(XGXSCfg)
+
+/* These must only be written via qib_write_kreg_ctxt() */
+#define kr_rcvhdraddr KREG_IDX(RcvHdrAddr0)
+#define kr_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0)
+
+
+#define CREG_IDX(regname) ((QIB_7220_##regname##_OFFS - \
+ QIB_7220_LBIntCnt_OFFS) / sizeof(u64))
+
+#define cr_badformat CREG_IDX(RxVersionErrCnt)
+#define cr_erricrc CREG_IDX(RxICRCErrCnt)
+#define cr_errlink CREG_IDX(RxLinkMalformCnt)
+#define cr_errlpcrc CREG_IDX(RxLPCRCErrCnt)
+#define cr_errpkey CREG_IDX(RxPKeyMismatchCnt)
+#define cr_rcvflowctrl_err CREG_IDX(RxFlowCtrlViolCnt)
+#define cr_err_rlen CREG_IDX(RxLenErrCnt)
+#define cr_errslen CREG_IDX(TxLenErrCnt)
+#define cr_errtidfull CREG_IDX(RxTIDFullErrCnt)
+#define cr_errtidvalid CREG_IDX(RxTIDValidErrCnt)
+#define cr_errvcrc CREG_IDX(RxVCRCErrCnt)
+#define cr_ibstatuschange CREG_IDX(IBStatusChangeCnt)
+#define cr_lbint CREG_IDX(LBIntCnt)
+#define cr_invalidrlen CREG_IDX(RxMaxMinLenErrCnt)
+#define cr_invalidslen CREG_IDX(TxMaxMinLenErrCnt)
+#define cr_lbflowstall CREG_IDX(LBFlowStallCnt)
+#define cr_pktrcv CREG_IDX(RxDataPktCnt)
+#define cr_pktrcvflowctrl CREG_IDX(RxFlowPktCnt)
+#define cr_pktsend CREG_IDX(TxDataPktCnt)
+#define cr_pktsendflow CREG_IDX(TxFlowPktCnt)
+#define cr_portovfl CREG_IDX(RxP0HdrEgrOvflCnt)
+#define cr_rcvebp CREG_IDX(RxEBPCnt)
+#define cr_rcvovfl CREG_IDX(RxBufOvflCnt)
+#define cr_senddropped CREG_IDX(TxDroppedPktCnt)
+#define cr_sendstall CREG_IDX(TxFlowStallCnt)
+#define cr_sendunderrun CREG_IDX(TxUnderrunCnt)
+#define cr_wordrcv CREG_IDX(RxDwordCnt)
+#define cr_wordsend CREG_IDX(TxDwordCnt)
+#define cr_txunsupvl CREG_IDX(TxUnsupVLErrCnt)
+#define cr_rxdroppkt CREG_IDX(RxDroppedPktCnt)
+#define cr_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt)
+#define cr_iblinkdown CREG_IDX(IBLinkDownedCnt)
+#define cr_ibsymbolerr CREG_IDX(IBSymbolErrCnt)
+#define cr_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt)
+#define cr_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt)
+#define cr_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt)
+#define cr_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt)
+#define cr_rxvlerr CREG_IDX(RxVlErrCnt)
+#define cr_rxdlidfltr CREG_IDX(RxDlidFltrCnt)
+#define cr_psstat CREG_IDX(PSStat)
+#define cr_psstart CREG_IDX(PSStart)
+#define cr_psinterval CREG_IDX(PSInterval)
+#define cr_psrcvdatacount CREG_IDX(PSRcvDataCount)
+#define cr_psrcvpktscount CREG_IDX(PSRcvPktsCount)
+#define cr_psxmitdatacount CREG_IDX(PSXmitDataCount)
+#define cr_psxmitpktscount CREG_IDX(PSXmitPktsCount)
+#define cr_psxmitwaitcount CREG_IDX(PSXmitWaitCount)
+#define cr_txsdmadesc CREG_IDX(TxSDmaDescCnt)
+#define cr_pcieretrydiag CREG_IDX(PcieRetryBufDiagQwordCnt)
+
+#define SYM_RMASK(regname, fldname) ((u64) \
+ QIB_7220_##regname##_##fldname##_RMASK)
+#define SYM_MASK(regname, fldname) ((u64) \
+ QIB_7220_##regname##_##fldname##_RMASK << \
+ QIB_7220_##regname##_##fldname##_LSB)
+#define SYM_LSB(regname, fldname) (QIB_7220_##regname##_##fldname##_LSB)
+#define SYM_FIELD(value, regname, fldname) ((u64) \
+ (((value) >> SYM_LSB(regname, fldname)) & \
+ SYM_RMASK(regname, fldname)))
+#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask)
+#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask)
+
+/* ibcctrl bits */
+#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
+/* cycle through TS1/TS2 till OK */
+#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3
+#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16
+
+#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
+#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
+#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
+
+#define BLOB_7220_IBCHG 0x81
+
+/*
+ * We could have a single register get/put routine, that takes a group type,
+ * but this is somewhat clearer and cleaner. It also gives us some error
+ * checking. 64 bit register reads should always work, but are inefficient
+ * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
+ * so we use kreg32 wherever possible. User register and counter register
+ * reads are always 32 bit reads, so only one form of those routines.
+ */
+
+/**
+ * qib_read_ureg32 - read 32-bit virtualized per-context register
+ * @dd: device
+ * @regno: register number
+ * @ctxt: context number
+ *
+ * Return the contents of a register that is virtualized to be per context.
+ * Returns -1 on errors (not distinguishable from valid contents at
+ * runtime; we may add a separate error variable at some point).
+ */
+static inline u32 qib_read_ureg32(const struct qib_devdata *dd,
+ enum qib_ureg regno, int ctxt)
+{
+ if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+ return 0;
+
+ if (dd->userbase)
+ return readl(regno + (u64 __iomem *)
+ ((char __iomem *)dd->userbase +
+ dd->ureg_align * ctxt));
+ else
+ return readl(regno + (u64 __iomem *)
+ (dd->uregbase +
+ (char __iomem *)dd->kregbase +
+ dd->ureg_align * ctxt));
+}
+
+/**
+ * qib_write_ureg - write 32-bit virtualized per-context register
+ * @dd: device
+ * @regno: register number
+ * @value: value
+ * @ctxt: context
+ *
+ * Write the contents of a register that is virtualized to be per context.
+ */
+static inline void qib_write_ureg(const struct qib_devdata *dd,
+ enum qib_ureg regno, u64 value, int ctxt)
+{
+ u64 __iomem *ubase;
+
+ if (dd->userbase)
+ ubase = (u64 __iomem *)
+ ((char __iomem *) dd->userbase +
+ dd->ureg_align * ctxt);
+ else
+ ubase = (u64 __iomem *)
+ (dd->uregbase +
+ (char __iomem *) dd->kregbase +
+ dd->ureg_align * ctxt);
+
+ if (dd->kregbase && (dd->flags & QIB_PRESENT))
+ writeq(value, &ubase[regno]);
+}
+
+/**
+ * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register
+ * @dd: the qlogic_ib device
+ * @regno: the register number to write
+ * @ctxt: the context containing the register
+ * @value: the value to write
+ */
+static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd,
+ const u16 regno, unsigned ctxt,
+ u64 value)
+{
+ qib_write_kreg(dd, regno + ctxt, value);
+}
+
+static inline void write_7220_creg(const struct qib_devdata *dd,
+ u16 regno, u64 value)
+{
+ if (dd->cspec->cregbase && (dd->flags & QIB_PRESENT))
+ writeq(value, &dd->cspec->cregbase[regno]);
+}
+
+static inline u64 read_7220_creg(const struct qib_devdata *dd, u16 regno)
+{
+ if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
+ return 0;
+ return readq(&dd->cspec->cregbase[regno]);
+}
+
+static inline u32 read_7220_creg32(const struct qib_devdata *dd, u16 regno)
+{
+ if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
+ return 0;
+ return readl(&dd->cspec->cregbase[regno]);
+}
+
+/* kr_revision bits */
+#define QLOGIC_IB_R_EMULATORREV_MASK ((1ULL << 22) - 1)
+#define QLOGIC_IB_R_EMULATORREV_SHIFT 40
+
+/* kr_control bits */
+#define QLOGIC_IB_C_RESET (1U << 7)
+
+/* kr_intstatus, kr_intclear, kr_intmask bits */
+#define QLOGIC_IB_I_RCVURG_MASK ((1ULL << 17) - 1)
+#define QLOGIC_IB_I_RCVURG_SHIFT 32
+#define QLOGIC_IB_I_RCVAVAIL_MASK ((1ULL << 17) - 1)
+#define QLOGIC_IB_I_RCVAVAIL_SHIFT 0
+#define QLOGIC_IB_I_SERDESTRIMDONE (1ULL << 27)
+
+#define QLOGIC_IB_C_FREEZEMODE 0x00000002
+#define QLOGIC_IB_C_LINKENABLE 0x00000004
+
+#define QLOGIC_IB_I_SDMAINT 0x8000000000000000ULL
+#define QLOGIC_IB_I_SDMADISABLED 0x4000000000000000ULL
+#define QLOGIC_IB_I_ERROR 0x0000000080000000ULL
+#define QLOGIC_IB_I_SPIOSENT 0x0000000040000000ULL
+#define QLOGIC_IB_I_SPIOBUFAVAIL 0x0000000020000000ULL
+#define QLOGIC_IB_I_GPIO 0x0000000010000000ULL
+
+/* variables for sanity checking interrupt and errors */
+#define QLOGIC_IB_I_BITSEXTANT \
+ (QLOGIC_IB_I_SDMAINT | QLOGIC_IB_I_SDMADISABLED | \
+ (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT) | \
+ (QLOGIC_IB_I_RCVAVAIL_MASK << \
+ QLOGIC_IB_I_RCVAVAIL_SHIFT) | \
+ QLOGIC_IB_I_ERROR | QLOGIC_IB_I_SPIOSENT | \
+ QLOGIC_IB_I_SPIOBUFAVAIL | QLOGIC_IB_I_GPIO | \
+ QLOGIC_IB_I_SERDESTRIMDONE)
+
+#define IB_HWE_BITSEXTANT \
+ (HWE_MASK(RXEMemParityErr) | \
+ HWE_MASK(TXEMemParityErr) | \
+ (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << \
+ QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) | \
+ QLOGIC_IB_HWE_PCIE1PLLFAILED | \
+ QLOGIC_IB_HWE_PCIE0PLLFAILED | \
+ QLOGIC_IB_HWE_PCIEPOISONEDTLP | \
+ QLOGIC_IB_HWE_PCIECPLTIMEOUT | \
+ QLOGIC_IB_HWE_PCIEBUSPARITYXTLH | \
+ QLOGIC_IB_HWE_PCIEBUSPARITYXADM | \
+ QLOGIC_IB_HWE_PCIEBUSPARITYRADM | \
+ HWE_MASK(PowerOnBISTFailed) | \
+ QLOGIC_IB_HWE_COREPLL_FBSLIP | \
+ QLOGIC_IB_HWE_COREPLL_RFSLIP | \
+ QLOGIC_IB_HWE_SERDESPLLFAILED | \
+ HWE_MASK(IBCBusToSPCParityErr) | \
+ HWE_MASK(IBCBusFromSPCParityErr) | \
+ QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR | \
+ QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR | \
+ QLOGIC_IB_HWE_SDMAMEMREADERR | \
+ QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED | \
+ QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT | \
+ QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT | \
+ QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT | \
+ QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT | \
+ QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR | \
+ QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR | \
+ QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR | \
+ QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR)
+
+#define IB_E_BITSEXTANT \
+ (ERR_MASK(RcvFormatErr) | ERR_MASK(RcvVCRCErr) | \
+ ERR_MASK(RcvICRCErr) | ERR_MASK(RcvMinPktLenErr) | \
+ ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvLongPktLenErr) | \
+ ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvUnexpectedCharErr) | \
+ ERR_MASK(RcvUnsupportedVLErr) | ERR_MASK(RcvEBPErr) | \
+ ERR_MASK(RcvIBFlowErr) | ERR_MASK(RcvBadVersionErr) | \
+ ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | \
+ ERR_MASK(RcvBadTidErr) | ERR_MASK(RcvHdrLenErr) | \
+ ERR_MASK(RcvHdrErr) | ERR_MASK(RcvIBLostLinkErr) | \
+ ERR_MASK(SendSpecialTriggerErr) | \
+ ERR_MASK(SDmaDisabledErr) | ERR_MASK(SendMinPktLenErr) | \
+ ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnderRunErr) | \
+ ERR_MASK(SendPktLenErr) | ERR_MASK(SendDroppedSmpPktErr) | \
+ ERR_MASK(SendDroppedDataPktErr) | \
+ ERR_MASK(SendPioArmLaunchErr) | \
+ ERR_MASK(SendUnexpectedPktNumErr) | \
+ ERR_MASK(SendUnsupportedVLErr) | ERR_MASK(SendBufMisuseErr) | \
+ ERR_MASK(SDmaGenMismatchErr) | ERR_MASK(SDmaOutOfBoundErr) | \
+ ERR_MASK(SDmaTailOutOfBoundErr) | ERR_MASK(SDmaBaseErr) | \
+ ERR_MASK(SDma1stDescErr) | ERR_MASK(SDmaRpyTagErr) | \
+ ERR_MASK(SDmaDwEnErr) | ERR_MASK(SDmaMissingDwErr) | \
+ ERR_MASK(SDmaUnexpDataErr) | \
+ ERR_MASK(IBStatusChanged) | ERR_MASK(InvalidAddrErr) | \
+ ERR_MASK(ResetNegated) | ERR_MASK(HardwareErr) | \
+ ERR_MASK(SDmaDescAddrMisalignErr) | \
+ ERR_MASK(InvalidEEPCmd))
+
+/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
+#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK 0x00000000000000ffULL
+#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT 0
+#define QLOGIC_IB_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL
+#define QLOGIC_IB_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL
+#define QLOGIC_IB_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL
+#define QLOGIC_IB_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL
+#define QLOGIC_IB_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL
+#define QLOGIC_IB_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
+#define QLOGIC_IB_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
+#define QLOGIC_IB_HWE_PCIE1PLLFAILED 0x0400000000000000ULL
+#define QLOGIC_IB_HWE_PCIE0PLLFAILED 0x0800000000000000ULL
+#define QLOGIC_IB_HWE_SERDESPLLFAILED 0x1000000000000000ULL
+/* specific to this chip */
+#define QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR 0x0000000000000040ULL
+#define QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR 0x0000000000000080ULL
+#define QLOGIC_IB_HWE_SDMAMEMREADERR 0x0000000010000000ULL
+#define QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED 0x2000000000000000ULL
+#define QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT 0x0100000000000000ULL
+#define QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT 0x0200000000000000ULL
+#define QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT 0x0400000000000000ULL
+#define QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT 0x0800000000000000ULL
+#define QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR 0x0000008000000000ULL
+#define QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL
+#define QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR 0x0000001000000000ULL
+#define QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR 0x0000002000000000ULL
+
+#define IBA7220_IBCC_LINKCMD_SHIFT 19
+
+/* kr_ibcddrctrl bits */
+#define IBA7220_IBC_DLIDLMC_MASK 0xFFFFFFFFUL
+#define IBA7220_IBC_DLIDLMC_SHIFT 32
+
+#define IBA7220_IBC_HRTBT_MASK (SYM_RMASK(IBCDDRCtrl, HRTBT_AUTO) | \
+ SYM_RMASK(IBCDDRCtrl, HRTBT_ENB))
+#define IBA7220_IBC_HRTBT_SHIFT SYM_LSB(IBCDDRCtrl, HRTBT_ENB)
+
+#define IBA7220_IBC_LANE_REV_SUPPORTED (1<<8)
+#define IBA7220_IBC_LREV_MASK 1
+#define IBA7220_IBC_LREV_SHIFT 8
+#define IBA7220_IBC_RXPOL_MASK 1
+#define IBA7220_IBC_RXPOL_SHIFT 7
+#define IBA7220_IBC_WIDTH_SHIFT 5
+#define IBA7220_IBC_WIDTH_MASK 0x3
+#define IBA7220_IBC_WIDTH_1X_ONLY (0 << IBA7220_IBC_WIDTH_SHIFT)
+#define IBA7220_IBC_WIDTH_4X_ONLY (1 << IBA7220_IBC_WIDTH_SHIFT)
+#define IBA7220_IBC_WIDTH_AUTONEG (2 << IBA7220_IBC_WIDTH_SHIFT)
+#define IBA7220_IBC_SPEED_AUTONEG (1 << 1)
+#define IBA7220_IBC_SPEED_SDR (1 << 2)
+#define IBA7220_IBC_SPEED_DDR (1 << 3)
+#define IBA7220_IBC_SPEED_AUTONEG_MASK (0x7 << 1)
+#define IBA7220_IBC_IBTA_1_2_MASK (1)
+
+/* kr_ibcddrstatus */
+/* link latency shift is 0, don't bother defining */
+#define IBA7220_DDRSTAT_LINKLAT_MASK 0x3ffffff
+
+/* kr_extstatus bits */
+#define QLOGIC_IB_EXTS_FREQSEL 0x2
+#define QLOGIC_IB_EXTS_SERDESSEL 0x4
+#define QLOGIC_IB_EXTS_MEMBIST_ENDTEST 0x0000000000004000
+#define QLOGIC_IB_EXTS_MEMBIST_DISABLED 0x0000000000008000
+
+/* kr_xgxsconfig bits */
+#define QLOGIC_IB_XGXS_RESET 0x5ULL
+#define QLOGIC_IB_XGXS_FC_SAFE (1ULL << 63)
+
+/* kr_rcvpktledcnt */
+#define IBA7220_LEDBLINK_ON_SHIFT 32 /* 4ns period on after packet */
+#define IBA7220_LEDBLINK_OFF_SHIFT 0 /* 4ns period off before next on */
+
+#define _QIB_GPIO_SDA_NUM 1
+#define _QIB_GPIO_SCL_NUM 0
+#define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7220 cards. */
+#define QIB_TWSI_TEMP_DEV 0x98
+
+/* HW counter clock is at 4nsec */
+#define QIB_7220_PSXMITWAIT_CHECK_RATE 4000
+
+#define IBA7220_R_INTRAVAIL_SHIFT 17
+#define IBA7220_R_PKEY_DIS_SHIFT 34
+#define IBA7220_R_TAILUPD_SHIFT 35
+#define IBA7220_R_CTXTCFG_SHIFT 36
+
+#define IBA7220_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */
+
+/*
+ * the size bits give us 2^N, in KB units. 0 marks as invalid,
+ * and 7 is reserved. We currently use only 2KB and 4KB
+ */
+#define IBA7220_TID_SZ_SHIFT 37 /* shift to 3bit size selector */
+#define IBA7220_TID_SZ_2K (1UL << IBA7220_TID_SZ_SHIFT) /* 2KB */
+#define IBA7220_TID_SZ_4K (2UL << IBA7220_TID_SZ_SHIFT) /* 4KB */
+#define IBA7220_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */
+#define PBC_7220_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */
+#define PBC_7220_VL15_SEND_CTRL (1ULL << 31) /* control version of same */
+
+#define AUTONEG_TRIES 5 /* sequential retries to negotiate DDR */
+
+/* packet rate matching delay multiplier */
+static u8 rate_to_delay[2][2] = {
+ /* 1x, 4x */
+ { 8, 2 }, /* SDR */
+ { 4, 1 } /* DDR */
+};
+
+static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
+ [IB_RATE_2_5_GBPS] = 8,
+ [IB_RATE_5_GBPS] = 4,
+ [IB_RATE_10_GBPS] = 2,
+ [IB_RATE_20_GBPS] = 1
+};
+
+#define IBA7220_LINKSPEED_SHIFT SYM_LSB(IBCStatus, LinkSpeedActive)
+#define IBA7220_LINKWIDTH_SHIFT SYM_LSB(IBCStatus, LinkWidthActive)
+
+/* link training states, from IBC */
+#define IB_7220_LT_STATE_DISABLED 0x00
+#define IB_7220_LT_STATE_LINKUP 0x01
+#define IB_7220_LT_STATE_POLLACTIVE 0x02
+#define IB_7220_LT_STATE_POLLQUIET 0x03
+#define IB_7220_LT_STATE_SLEEPDELAY 0x04
+#define IB_7220_LT_STATE_SLEEPQUIET 0x05
+#define IB_7220_LT_STATE_CFGDEBOUNCE 0x08
+#define IB_7220_LT_STATE_CFGRCVFCFG 0x09
+#define IB_7220_LT_STATE_CFGWAITRMT 0x0a
+#define IB_7220_LT_STATE_CFGIDLE 0x0b
+#define IB_7220_LT_STATE_RECOVERRETRAIN 0x0c
+#define IB_7220_LT_STATE_RECOVERWAITRMT 0x0e
+#define IB_7220_LT_STATE_RECOVERIDLE 0x0f
+
+/* link state machine states from IBC */
+#define IB_7220_L_STATE_DOWN 0x0
+#define IB_7220_L_STATE_INIT 0x1
+#define IB_7220_L_STATE_ARM 0x2
+#define IB_7220_L_STATE_ACTIVE 0x3
+#define IB_7220_L_STATE_ACT_DEFER 0x4
+
+static const u8 qib_7220_physportstate[0x20] = {
+ [IB_7220_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
+ [IB_7220_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
+ [IB_7220_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
+ [IB_7220_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
+ [IB_7220_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
+ [IB_7220_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
+ [IB_7220_LT_STATE_CFGDEBOUNCE] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7220_LT_STATE_CFGRCVFCFG] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7220_LT_STATE_CFGWAITRMT] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7220_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7220_LT_STATE_RECOVERRETRAIN] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [IB_7220_LT_STATE_RECOVERWAITRMT] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [IB_7220_LT_STATE_RECOVERIDLE] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
+};
+
+int qib_special_trigger;
+module_param_named(special_trigger, qib_special_trigger, int, S_IRUGO);
+MODULE_PARM_DESC(special_trigger, "Enable SpecialTrigger arm/launch");
+
+#define IBCBUSFRSPCPARITYERR HWE_MASK(IBCBusFromSPCParityErr)
+#define IBCBUSTOSPCPARITYERR HWE_MASK(IBCBusToSPCParityErr)
+
+#define SYM_MASK_BIT(regname, fldname, bit) ((u64) \
+ (1ULL << (SYM_LSB(regname, fldname) + (bit))))
+
+#define TXEMEMPARITYERR_PIOBUF \
+ SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 0)
+#define TXEMEMPARITYERR_PIOPBC \
+ SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 1)
+#define TXEMEMPARITYERR_PIOLAUNCHFIFO \
+ SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 2)
+
+#define RXEMEMPARITYERR_RCVBUF \
+ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 0)
+#define RXEMEMPARITYERR_LOOKUPQ \
+ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 1)
+#define RXEMEMPARITYERR_EXPTID \
+ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 2)
+#define RXEMEMPARITYERR_EAGERTID \
+ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 3)
+#define RXEMEMPARITYERR_FLAGBUF \
+ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 4)
+#define RXEMEMPARITYERR_DATAINFO \
+ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 5)
+#define RXEMEMPARITYERR_HDRINFO \
+ SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 6)
+
+/* 7220 specific hardware errors... */
+static const struct qib_hwerror_msgs qib_7220_hwerror_msgs[] = {
+ /* generic hardware errors */
+ QLOGIC_IB_HWE_MSG(IBCBUSFRSPCPARITYERR, "QIB2IB Parity"),
+ QLOGIC_IB_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2QIB Parity"),
+
+ QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOBUF,
+ "TXE PIOBUF Memory Parity"),
+ QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOPBC,
+ "TXE PIOPBC Memory Parity"),
+ QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOLAUNCHFIFO,
+ "TXE PIOLAUNCHFIFO Memory Parity"),
+
+ QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_RCVBUF,
+ "RXE RCVBUF Memory Parity"),
+ QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_LOOKUPQ,
+ "RXE LOOKUPQ Memory Parity"),
+ QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EAGERTID,
+ "RXE EAGERTID Memory Parity"),
+ QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EXPTID,
+ "RXE EXPTID Memory Parity"),
+ QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_FLAGBUF,
+ "RXE FLAGBUF Memory Parity"),
+ QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_DATAINFO,
+ "RXE DATAINFO Memory Parity"),
+ QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_HDRINFO,
+ "RXE HDRINFO Memory Parity"),
+
+ /* chip-specific hardware errors */
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEPOISONEDTLP,
+ "PCIe Poisoned TLP"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLTIMEOUT,
+ "PCIe completion timeout"),
+ /*
+ * In practice, it's unlikely that we'll see PCIe PLL, or bus
+ * parity or memory parity error failures, because most likely we
+ * won't be able to talk to the core of the chip. Nonetheless, we
+ * might see them, if they are in parts of the PCIe core that aren't
+ * essential.
+ */
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE1PLLFAILED,
+ "PCIePLL1"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE0PLLFAILED,
+ "PCIePLL0"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXTLH,
+ "PCIe XTLH core parity"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXADM,
+ "PCIe ADM TX core parity"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYRADM,
+ "PCIe ADM RX core parity"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SERDESPLLFAILED,
+ "SerDes PLL"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR,
+ "PCIe cpl header queue"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR,
+ "PCIe cpl data queue"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SDMAMEMREADERR,
+ "Send DMA memory read"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED,
+ "uC PLL clock not locked"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT,
+ "PCIe serdes Q0 no clock"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT,
+ "PCIe serdes Q1 no clock"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT,
+ "PCIe serdes Q2 no clock"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT,
+ "PCIe serdes Q3 no clock"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR,
+ "DDS RXEQ memory parity"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR,
+ "IB uC memory parity"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR,
+ "PCIe uC oct0 memory parity"),
+ QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR,
+ "PCIe uC oct1 memory parity"),
+};
+
+#define RXE_PARITY (RXEMEMPARITYERR_EAGERTID|RXEMEMPARITYERR_EXPTID)
+
+#define QLOGIC_IB_E_PKTERRS (\
+ ERR_MASK(SendPktLenErr) | \
+ ERR_MASK(SendDroppedDataPktErr) | \
+ ERR_MASK(RcvVCRCErr) | \
+ ERR_MASK(RcvICRCErr) | \
+ ERR_MASK(RcvShortPktLenErr) | \
+ ERR_MASK(RcvEBPErr))
+
+/* Convenience for decoding Send DMA errors */
+#define QLOGIC_IB_E_SDMAERRS ( \
+ ERR_MASK(SDmaGenMismatchErr) | \
+ ERR_MASK(SDmaOutOfBoundErr) | \
+ ERR_MASK(SDmaTailOutOfBoundErr) | ERR_MASK(SDmaBaseErr) | \
+ ERR_MASK(SDma1stDescErr) | ERR_MASK(SDmaRpyTagErr) | \
+ ERR_MASK(SDmaDwEnErr) | ERR_MASK(SDmaMissingDwErr) | \
+ ERR_MASK(SDmaUnexpDataErr) | \
+ ERR_MASK(SDmaDescAddrMisalignErr) | \
+ ERR_MASK(SDmaDisabledErr) | \
+ ERR_MASK(SendBufMisuseErr))
+
+/* These are all rcv-related errors which we want to count for stats */
+#define E_SUM_PKTERRS \
+ (ERR_MASK(RcvHdrLenErr) | ERR_MASK(RcvBadTidErr) | \
+ ERR_MASK(RcvBadVersionErr) | ERR_MASK(RcvHdrErr) | \
+ ERR_MASK(RcvLongPktLenErr) | ERR_MASK(RcvShortPktLenErr) | \
+ ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \
+ ERR_MASK(RcvFormatErr) | ERR_MASK(RcvUnsupportedVLErr) | \
+ ERR_MASK(RcvUnexpectedCharErr) | ERR_MASK(RcvEBPErr))
+
+/* These are all send-related errors which we want to count for stats */
+#define E_SUM_ERRS \
+ (ERR_MASK(SendPioArmLaunchErr) | ERR_MASK(SendUnexpectedPktNumErr) | \
+ ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \
+ ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnsupportedVLErr) | \
+ ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \
+ ERR_MASK(InvalidAddrErr))
+
+/*
+ * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore
+ * errors not related to freeze and cancelling buffers. Can't ignore
+ * armlaunch because could get more while still cleaning up, and need
+ * to cancel those as they happen.
+ */
+#define E_SPKT_ERRS_IGNORE \
+ (ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \
+ ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendMinPktLenErr) | \
+ ERR_MASK(SendPktLenErr))
+
+/*
+ * these are errors that can occur when the link changes state while
+ * a packet is being sent or received. This doesn't cover things
+ * like EBP or VCRC that can be the result of a sending having the
+ * link change state, so we receive a "known bad" packet.
+ */
+#define E_SUM_LINK_PKTERRS \
+ (ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \
+ ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \
+ ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \
+ ERR_MASK(RcvUnexpectedCharErr))
+
+static void autoneg_7220_work(struct work_struct *);
+static u32 __iomem *qib_7220_getsendbuf(struct qib_pportdata *, u64, u32 *);
+
+/*
+ * Called when we might have an error that is specific to a particular
+ * PIO buffer, and may need to cancel that buffer, so it can be re-used.
+ * because we don't need to force the update of pioavail.
+ */
+static void qib_disarm_7220_senderrbufs(struct qib_pportdata *ppd)
+{
+ unsigned long sbuf[3];
+ struct qib_devdata *dd = ppd->dd;
+
+ /*
+ * It's possible that sendbuffererror could have bits set; might
+ * have already done this as a result of hardware error handling.
+ */
+ /* read these before writing errorclear */
+ sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror);
+ sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1);
+ sbuf[2] = qib_read_kreg64(dd, kr_sendbuffererror + 2);
+
+ if (sbuf[0] || sbuf[1] || sbuf[2])
+ qib_disarm_piobufs_set(dd, sbuf,
+ dd->piobcnt2k + dd->piobcnt4k);
+}
+
+static void qib_7220_txe_recover(struct qib_devdata *dd)
+{
+ qib_devinfo(dd->pcidev, "Recovering from TXE PIO parity error\n");
+ qib_disarm_7220_senderrbufs(dd->pport);
+}
+
+/*
+ * This is called with interrupts disabled and sdma_lock held.
+ */
+static void qib_7220_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 set_sendctrl = 0;
+ u64 clr_sendctrl = 0;
+
+ if (op & QIB_SDMA_SENDCTRL_OP_ENABLE)
+ set_sendctrl |= SYM_MASK(SendCtrl, SDmaEnable);
+ else
+ clr_sendctrl |= SYM_MASK(SendCtrl, SDmaEnable);
+
+ if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE)
+ set_sendctrl |= SYM_MASK(SendCtrl, SDmaIntEnable);
+ else
+ clr_sendctrl |= SYM_MASK(SendCtrl, SDmaIntEnable);
+
+ if (op & QIB_SDMA_SENDCTRL_OP_HALT)
+ set_sendctrl |= SYM_MASK(SendCtrl, SDmaHalt);
+ else
+ clr_sendctrl |= SYM_MASK(SendCtrl, SDmaHalt);
+
+ spin_lock(&dd->sendctrl_lock);
+
+ dd->sendctrl |= set_sendctrl;
+ dd->sendctrl &= ~clr_sendctrl;
+
+ qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+
+ spin_unlock(&dd->sendctrl_lock);
+}
+
+static void qib_decode_7220_sdma_errs(struct qib_pportdata *ppd,
+ u64 err, char *buf, size_t blen)
+{
+ static const struct {
+ u64 err;
+ const char *msg;
+ } errs[] = {
+ { ERR_MASK(SDmaGenMismatchErr),
+ "SDmaGenMismatch" },
+ { ERR_MASK(SDmaOutOfBoundErr),
+ "SDmaOutOfBound" },
+ { ERR_MASK(SDmaTailOutOfBoundErr),
+ "SDmaTailOutOfBound" },
+ { ERR_MASK(SDmaBaseErr),
+ "SDmaBase" },
+ { ERR_MASK(SDma1stDescErr),
+ "SDma1stDesc" },
+ { ERR_MASK(SDmaRpyTagErr),
+ "SDmaRpyTag" },
+ { ERR_MASK(SDmaDwEnErr),
+ "SDmaDwEn" },
+ { ERR_MASK(SDmaMissingDwErr),
+ "SDmaMissingDw" },
+ { ERR_MASK(SDmaUnexpDataErr),
+ "SDmaUnexpData" },
+ { ERR_MASK(SDmaDescAddrMisalignErr),
+ "SDmaDescAddrMisalign" },
+ { ERR_MASK(SendBufMisuseErr),
+ "SendBufMisuse" },
+ { ERR_MASK(SDmaDisabledErr),
+ "SDmaDisabled" },
+ };
+ int i;
+ size_t bidx = 0;
+
+ for (i = 0; i < ARRAY_SIZE(errs); i++) {
+ if (err & errs[i].err)
+ bidx += scnprintf(buf + bidx, blen - bidx,
+ "%s ", errs[i].msg);
+ }
+}
+
+/*
+ * This is called as part of link down clean up so disarm and flush
+ * all send buffers so that SMP packets can be sent.
+ */
+static void qib_7220_sdma_hw_clean_up(struct qib_pportdata *ppd)
+{
+ /* This will trigger the Abort interrupt */
+ sendctrl_7220_mod(ppd, QIB_SENDCTRL_DISARM_ALL | QIB_SENDCTRL_FLUSH |
+ QIB_SENDCTRL_AVAIL_BLIP);
+ ppd->dd->upd_pio_shadow = 1; /* update our idea of what's busy */
+}
+
+static void qib_sdma_7220_setlengen(struct qib_pportdata *ppd)
+{
+ /*
+ * Set SendDmaLenGen and clear and set
+ * the MSB of the generation count to enable generation checking
+ * and load the internal generation counter.
+ */
+ qib_write_kreg(ppd->dd, kr_senddmalengen, ppd->sdma_descq_cnt);
+ qib_write_kreg(ppd->dd, kr_senddmalengen,
+ ppd->sdma_descq_cnt |
+ (1ULL << QIB_7220_SendDmaLenGen_Generation_MSB));
+}
+
+static void qib_7220_sdma_hw_start_up(struct qib_pportdata *ppd)
+{
+ qib_sdma_7220_setlengen(ppd);
+ qib_sdma_update_7220_tail(ppd, 0); /* Set SendDmaTail */
+ ppd->sdma_head_dma[0] = 0;
+}
+
+#define DISABLES_SDMA ( \
+ ERR_MASK(SDmaDisabledErr) | \
+ ERR_MASK(SDmaBaseErr) | \
+ ERR_MASK(SDmaTailOutOfBoundErr) | \
+ ERR_MASK(SDmaOutOfBoundErr) | \
+ ERR_MASK(SDma1stDescErr) | \
+ ERR_MASK(SDmaRpyTagErr) | \
+ ERR_MASK(SDmaGenMismatchErr) | \
+ ERR_MASK(SDmaDescAddrMisalignErr) | \
+ ERR_MASK(SDmaMissingDwErr) | \
+ ERR_MASK(SDmaDwEnErr))
+
+static void sdma_7220_errors(struct qib_pportdata *ppd, u64 errs)
+{
+ unsigned long flags;
+ struct qib_devdata *dd = ppd->dd;
+ char *msg;
+
+ errs &= QLOGIC_IB_E_SDMAERRS;
+
+ msg = dd->cspec->sdmamsgbuf;
+ qib_decode_7220_sdma_errs(ppd, errs, msg,
+ sizeof(dd->cspec->sdmamsgbuf));
+ spin_lock_irqsave(&ppd->sdma_lock, flags);
+
+ if (errs & ERR_MASK(SendBufMisuseErr)) {
+ unsigned long sbuf[3];
+
+ sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror);
+ sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1);
+ sbuf[2] = qib_read_kreg64(dd, kr_sendbuffererror + 2);
+
+ qib_dev_err(ppd->dd,
+ "IB%u:%u SendBufMisuse: %04lx %016lx %016lx\n",
+ ppd->dd->unit, ppd->port, sbuf[2], sbuf[1],
+ sbuf[0]);
+ }
+
+ if (errs & ERR_MASK(SDmaUnexpDataErr))
+ qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", ppd->dd->unit,
+ ppd->port);
+
+ switch (ppd->sdma_state.current_state) {
+ case qib_sdma_state_s00_hw_down:
+ /* not expecting any interrupts */
+ break;
+
+ case qib_sdma_state_s10_hw_start_up_wait:
+ /* handled in intr path */
+ break;
+
+ case qib_sdma_state_s20_idle:
+ /* not expecting any interrupts */
+ break;
+
+ case qib_sdma_state_s30_sw_clean_up_wait:
+ /* not expecting any interrupts */
+ break;
+
+ case qib_sdma_state_s40_hw_clean_up_wait:
+ if (errs & ERR_MASK(SDmaDisabledErr))
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e50_hw_cleaned);
+ break;
+
+ case qib_sdma_state_s50_hw_halt_wait:
+ /* handled in intr path */
+ break;
+
+ case qib_sdma_state_s99_running:
+ if (errs & DISABLES_SDMA)
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e7220_err_halted);
+ break;
+ }
+
+ spin_unlock_irqrestore(&ppd->sdma_lock, flags);
+}
+
+/*
+ * Decode the error status into strings, deciding whether to always
+ * print * it or not depending on "normal packet errors" vs everything
+ * else. Return 1 if "real" errors, otherwise 0 if only packet
+ * errors, so caller can decide what to print with the string.
+ */
+static int qib_decode_7220_err(struct qib_devdata *dd, char *buf, size_t blen,
+ u64 err)
+{
+ int iserr = 1;
+
+ *buf = '\0';
+ if (err & QLOGIC_IB_E_PKTERRS) {
+ if (!(err & ~QLOGIC_IB_E_PKTERRS))
+ iserr = 0;
+ if ((err & ERR_MASK(RcvICRCErr)) &&
+ !(err & (ERR_MASK(RcvVCRCErr) | ERR_MASK(RcvEBPErr))))
+ strlcat(buf, "CRC ", blen);
+ if (!iserr)
+ goto done;
+ }
+ if (err & ERR_MASK(RcvHdrLenErr))
+ strlcat(buf, "rhdrlen ", blen);
+ if (err & ERR_MASK(RcvBadTidErr))
+ strlcat(buf, "rbadtid ", blen);
+ if (err & ERR_MASK(RcvBadVersionErr))
+ strlcat(buf, "rbadversion ", blen);
+ if (err & ERR_MASK(RcvHdrErr))
+ strlcat(buf, "rhdr ", blen);
+ if (err & ERR_MASK(SendSpecialTriggerErr))
+ strlcat(buf, "sendspecialtrigger ", blen);
+ if (err & ERR_MASK(RcvLongPktLenErr))
+ strlcat(buf, "rlongpktlen ", blen);
+ if (err & ERR_MASK(RcvMaxPktLenErr))
+ strlcat(buf, "rmaxpktlen ", blen);
+ if (err & ERR_MASK(RcvMinPktLenErr))
+ strlcat(buf, "rminpktlen ", blen);
+ if (err & ERR_MASK(SendMinPktLenErr))
+ strlcat(buf, "sminpktlen ", blen);
+ if (err & ERR_MASK(RcvFormatErr))
+ strlcat(buf, "rformaterr ", blen);
+ if (err & ERR_MASK(RcvUnsupportedVLErr))
+ strlcat(buf, "runsupvl ", blen);
+ if (err & ERR_MASK(RcvUnexpectedCharErr))
+ strlcat(buf, "runexpchar ", blen);
+ if (err & ERR_MASK(RcvIBFlowErr))
+ strlcat(buf, "ribflow ", blen);
+ if (err & ERR_MASK(SendUnderRunErr))
+ strlcat(buf, "sunderrun ", blen);
+ if (err & ERR_MASK(SendPioArmLaunchErr))
+ strlcat(buf, "spioarmlaunch ", blen);
+ if (err & ERR_MASK(SendUnexpectedPktNumErr))
+ strlcat(buf, "sunexperrpktnum ", blen);
+ if (err & ERR_MASK(SendDroppedSmpPktErr))
+ strlcat(buf, "sdroppedsmppkt ", blen);
+ if (err & ERR_MASK(SendMaxPktLenErr))
+ strlcat(buf, "smaxpktlen ", blen);
+ if (err & ERR_MASK(SendUnsupportedVLErr))
+ strlcat(buf, "sunsupVL ", blen);
+ if (err & ERR_MASK(InvalidAddrErr))
+ strlcat(buf, "invalidaddr ", blen);
+ if (err & ERR_MASK(RcvEgrFullErr))
+ strlcat(buf, "rcvegrfull ", blen);
+ if (err & ERR_MASK(RcvHdrFullErr))
+ strlcat(buf, "rcvhdrfull ", blen);
+ if (err & ERR_MASK(IBStatusChanged))
+ strlcat(buf, "ibcstatuschg ", blen);
+ if (err & ERR_MASK(RcvIBLostLinkErr))
+ strlcat(buf, "riblostlink ", blen);
+ if (err & ERR_MASK(HardwareErr))
+ strlcat(buf, "hardware ", blen);
+ if (err & ERR_MASK(ResetNegated))
+ strlcat(buf, "reset ", blen);
+ if (err & QLOGIC_IB_E_SDMAERRS)
+ qib_decode_7220_sdma_errs(dd->pport, err, buf, blen);
+ if (err & ERR_MASK(InvalidEEPCmd))
+ strlcat(buf, "invalideepromcmd ", blen);
+done:
+ return iserr;
+}
+
+static void reenable_7220_chase(struct timer_list *t)
+{
+ struct qib_chippport_specific *cpspec = from_timer(cpspec, t,
+ chase_timer);
+ struct qib_pportdata *ppd = &cpspec->pportdata;
+
+ ppd->cpspec->chase_timer.expires = 0;
+ qib_set_ib_7220_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
+ QLOGIC_IB_IBCC_LINKINITCMD_POLL);
+}
+
+static void handle_7220_chase(struct qib_pportdata *ppd, u64 ibcst)
+{
+ u8 ibclt;
+ unsigned long tnow;
+
+ ibclt = (u8)SYM_FIELD(ibcst, IBCStatus, LinkTrainingState);
+
+ /*
+ * Detect and handle the state chase issue, where we can
+ * get stuck if we are unlucky on timing on both sides of
+ * the link. If we are, we disable, set a timer, and
+ * then re-enable.
+ */
+ switch (ibclt) {
+ case IB_7220_LT_STATE_CFGRCVFCFG:
+ case IB_7220_LT_STATE_CFGWAITRMT:
+ case IB_7220_LT_STATE_TXREVLANES:
+ case IB_7220_LT_STATE_CFGENH:
+ tnow = jiffies;
+ if (ppd->cpspec->chase_end &&
+ time_after(tnow, ppd->cpspec->chase_end)) {
+ ppd->cpspec->chase_end = 0;
+ qib_set_ib_7220_lstate(ppd,
+ QLOGIC_IB_IBCC_LINKCMD_DOWN,
+ QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+ ppd->cpspec->chase_timer.expires = jiffies +
+ QIB_CHASE_DIS_TIME;
+ add_timer(&ppd->cpspec->chase_timer);
+ } else if (!ppd->cpspec->chase_end)
+ ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME;
+ break;
+
+ default:
+ ppd->cpspec->chase_end = 0;
+ break;
+ }
+}
+
+static void handle_7220_errors(struct qib_devdata *dd, u64 errs)
+{
+ char *msg;
+ u64 ignore_this_time = 0;
+ u64 iserr = 0;
+ struct qib_pportdata *ppd = dd->pport;
+ u64 mask;
+
+ /* don't report errors that are masked */
+ errs &= dd->cspec->errormask;
+ msg = dd->cspec->emsgbuf;
+
+ /* do these first, they are most important */
+ if (errs & ERR_MASK(HardwareErr))
+ qib_7220_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf));
+
+ if (errs & QLOGIC_IB_E_SDMAERRS)
+ sdma_7220_errors(ppd, errs);
+
+ if (errs & ~IB_E_BITSEXTANT)
+ qib_dev_err(dd,
+ "error interrupt with unknown errors %llx set\n",
+ (unsigned long long) (errs & ~IB_E_BITSEXTANT));
+
+ if (errs & E_SUM_ERRS) {
+ qib_disarm_7220_senderrbufs(ppd);
+ if ((errs & E_SUM_LINK_PKTERRS) &&
+ !(ppd->lflags & QIBL_LINKACTIVE)) {
+ /*
+ * This can happen when trying to bring the link
+ * up, but the IB link changes state at the "wrong"
+ * time. The IB logic then complains that the packet
+ * isn't valid. We don't want to confuse people, so
+ * we just don't print them, except at debug
+ */
+ ignore_this_time = errs & E_SUM_LINK_PKTERRS;
+ }
+ } else if ((errs & E_SUM_LINK_PKTERRS) &&
+ !(ppd->lflags & QIBL_LINKACTIVE)) {
+ /*
+ * This can happen when SMA is trying to bring the link
+ * up, but the IB link changes state at the "wrong" time.
+ * The IB logic then complains that the packet isn't
+ * valid. We don't want to confuse people, so we just
+ * don't print them, except at debug
+ */
+ ignore_this_time = errs & E_SUM_LINK_PKTERRS;
+ }
+
+ qib_write_kreg(dd, kr_errclear, errs);
+
+ errs &= ~ignore_this_time;
+ if (!errs)
+ goto done;
+
+ /*
+ * The ones we mask off are handled specially below
+ * or above. Also mask SDMADISABLED by default as it
+ * is too chatty.
+ */
+ mask = ERR_MASK(IBStatusChanged) |
+ ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) |
+ ERR_MASK(HardwareErr) | ERR_MASK(SDmaDisabledErr);
+
+ qib_decode_7220_err(dd, msg, sizeof(dd->cspec->emsgbuf), errs & ~mask);
+
+ if (errs & E_SUM_PKTERRS)
+ qib_stats.sps_rcverrs++;
+ if (errs & E_SUM_ERRS)
+ qib_stats.sps_txerrs++;
+ iserr = errs & ~(E_SUM_PKTERRS | QLOGIC_IB_E_PKTERRS |
+ ERR_MASK(SDmaDisabledErr));
+
+ if (errs & ERR_MASK(IBStatusChanged)) {
+ u64 ibcs;
+
+ ibcs = qib_read_kreg64(dd, kr_ibcstatus);
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
+ handle_7220_chase(ppd, ibcs);
+
+ /* Update our picture of width and speed from chip */
+ ppd->link_width_active =
+ ((ibcs >> IBA7220_LINKWIDTH_SHIFT) & 1) ?
+ IB_WIDTH_4X : IB_WIDTH_1X;
+ ppd->link_speed_active =
+ ((ibcs >> IBA7220_LINKSPEED_SHIFT) & 1) ?
+ QIB_IB_DDR : QIB_IB_SDR;
+
+ /*
+ * Since going into a recovery state causes the link state
+ * to go down and since recovery is transitory, it is better
+ * if we "miss" ever seeing the link training state go into
+ * recovery (i.e., ignore this transition for link state
+ * special handling purposes) without updating lastibcstat.
+ */
+ if (qib_7220_phys_portstate(ibcs) !=
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER)
+ qib_handle_e_ibstatuschanged(ppd, ibcs);
+ }
+
+ if (errs & ERR_MASK(ResetNegated)) {
+ qib_dev_err(dd,
+ "Got reset, requires re-init (unload and reload driver)\n");
+ dd->flags &= ~QIB_INITTED; /* needs re-init */
+ /* mark as having had error */
+ *dd->devstatusp |= QIB_STATUS_HWERROR;
+ *dd->pport->statusp &= ~QIB_STATUS_IB_CONF;
+ }
+
+ if (*msg && iserr)
+ qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
+
+ if (ppd->state_wanted & ppd->lflags)
+ wake_up_interruptible(&ppd->state_wait);
+
+ /*
+ * If there were hdrq or egrfull errors, wake up any processes
+ * waiting in poll. We used to try to check which contexts had
+ * the overflow, but given the cost of that and the chip reads
+ * to support it, it's better to just wake everybody up if we
+ * get an overflow; waiters can poll again if it's not them.
+ */
+ if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) {
+ qib_handle_urcv(dd, ~0U);
+ if (errs & ERR_MASK(RcvEgrFullErr))
+ qib_stats.sps_buffull++;
+ else
+ qib_stats.sps_hdrfull++;
+ }
+done:
+ return;
+}
+
+/* enable/disable chip from delivering interrupts */
+static void qib_7220_set_intr_state(struct qib_devdata *dd, u32 enable)
+{
+ if (enable) {
+ if (dd->flags & QIB_BADINTR)
+ return;
+ qib_write_kreg(dd, kr_intmask, ~0ULL);
+ /* force re-interrupt of any pending interrupts. */
+ qib_write_kreg(dd, kr_intclear, 0ULL);
+ } else
+ qib_write_kreg(dd, kr_intmask, 0ULL);
+}
+
+/*
+ * Try to cleanup as much as possible for anything that might have gone
+ * wrong while in freeze mode, such as pio buffers being written by user
+ * processes (causing armlaunch), send errors due to going into freeze mode,
+ * etc., and try to avoid causing extra interrupts while doing so.
+ * Forcibly update the in-memory pioavail register copies after cleanup
+ * because the chip won't do it while in freeze mode (the register values
+ * themselves are kept correct).
+ * Make sure that we don't lose any important interrupts by using the chip
+ * feature that says that writing 0 to a bit in *clear that is set in
+ * *status will cause an interrupt to be generated again (if allowed by
+ * the *mask value).
+ * This is in chip-specific code because of all of the register accesses,
+ * even though the details are similar on most chips.
+ */
+static void qib_7220_clear_freeze(struct qib_devdata *dd)
+{
+ /* disable error interrupts, to avoid confusion */
+ qib_write_kreg(dd, kr_errmask, 0ULL);
+
+ /* also disable interrupts; errormask is sometimes overwritten */
+ qib_7220_set_intr_state(dd, 0);
+
+ qib_cancel_sends(dd->pport);
+
+ /* clear the freeze, and be sure chip saw it */
+ qib_write_kreg(dd, kr_control, dd->control);
+ qib_read_kreg32(dd, kr_scratch);
+
+ /* force in-memory update now we are out of freeze */
+ qib_force_pio_avail_update(dd);
+
+ /*
+ * force new interrupt if any hwerr, error or interrupt bits are
+ * still set, and clear "safe" send packet errors related to freeze
+ * and cancelling sends. Re-enable error interrupts before possible
+ * force of re-interrupt on pending interrupts.
+ */
+ qib_write_kreg(dd, kr_hwerrclear, 0ULL);
+ qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE);
+ qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
+ qib_7220_set_intr_state(dd, 1);
+}
+
+/**
+ * qib_7220_handle_hwerrors - display hardware errors.
+ * @dd: the qlogic_ib device
+ * @msg: the output buffer
+ * @msgl: the size of the output buffer
+ *
+ * Use same msg buffer as regular errors to avoid excessive stack
+ * use. Most hardware errors are catastrophic, but for right now,
+ * we'll print them and continue. We reuse the same message buffer as
+ * handle_7220_errors() to avoid excessive stack usage.
+ */
+static void qib_7220_handle_hwerrors(struct qib_devdata *dd, char *msg,
+ size_t msgl)
+{
+ u64 hwerrs;
+ u32 bits, ctrl;
+ int isfatal = 0;
+ char *bitsmsg;
+
+ hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
+ if (!hwerrs)
+ goto bail;
+ if (hwerrs == ~0ULL) {
+ qib_dev_err(dd,
+ "Read of hardware error status failed (all bits set); ignoring\n");
+ goto bail;
+ }
+ qib_stats.sps_hwerrs++;
+
+ /*
+ * Always clear the error status register, except MEMBISTFAIL,
+ * regardless of whether we continue or stop using the chip.
+ * We want that set so we know it failed, even across driver reload.
+ * We'll still ignore it in the hwerrmask. We do this partly for
+ * diagnostics, but also for support.
+ */
+ qib_write_kreg(dd, kr_hwerrclear,
+ hwerrs & ~HWE_MASK(PowerOnBISTFailed));
+
+ hwerrs &= dd->cspec->hwerrmask;
+
+ if (hwerrs & ~(TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC |
+ RXE_PARITY))
+ qib_devinfo(dd->pcidev,
+ "Hardware error: hwerr=0x%llx (cleared)\n",
+ (unsigned long long) hwerrs);
+
+ if (hwerrs & ~IB_HWE_BITSEXTANT)
+ qib_dev_err(dd,
+ "hwerror interrupt with unknown errors %llx set\n",
+ (unsigned long long) (hwerrs & ~IB_HWE_BITSEXTANT));
+
+ if (hwerrs & QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR)
+ qib_sd7220_clr_ibpar(dd);
+
+ ctrl = qib_read_kreg32(dd, kr_control);
+ if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) {
+ /*
+ * Parity errors in send memory are recoverable by h/w
+ * just do housekeeping, exit freeze mode and continue.
+ */
+ if (hwerrs & (TXEMEMPARITYERR_PIOBUF |
+ TXEMEMPARITYERR_PIOPBC)) {
+ qib_7220_txe_recover(dd);
+ hwerrs &= ~(TXEMEMPARITYERR_PIOBUF |
+ TXEMEMPARITYERR_PIOPBC);
+ }
+ if (hwerrs)
+ isfatal = 1;
+ else
+ qib_7220_clear_freeze(dd);
+ }
+
+ *msg = '\0';
+
+ if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
+ isfatal = 1;
+ strlcat(msg,
+ "[Memory BIST test failed, InfiniPath hardware unusable]",
+ msgl);
+ /* ignore from now on, so disable until driver reloaded */
+ dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
+ qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+ }
+
+ qib_format_hwerrors(hwerrs, qib_7220_hwerror_msgs,
+ ARRAY_SIZE(qib_7220_hwerror_msgs), msg, msgl);
+
+ bitsmsg = dd->cspec->bitsmsgbuf;
+ if (hwerrs & (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK <<
+ QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT)) {
+ bits = (u32) ((hwerrs >>
+ QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) &
+ QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK);
+ snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf),
+ "[PCIe Mem Parity Errs %x] ", bits);
+ strlcat(msg, bitsmsg, msgl);
+ }
+
+#define _QIB_PLL_FAIL (QLOGIC_IB_HWE_COREPLL_FBSLIP | \
+ QLOGIC_IB_HWE_COREPLL_RFSLIP)
+
+ if (hwerrs & _QIB_PLL_FAIL) {
+ isfatal = 1;
+ snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf),
+ "[PLL failed (%llx), InfiniPath hardware unusable]",
+ (unsigned long long) hwerrs & _QIB_PLL_FAIL);
+ strlcat(msg, bitsmsg, msgl);
+ /* ignore from now on, so disable until driver reloaded */
+ dd->cspec->hwerrmask &= ~(hwerrs & _QIB_PLL_FAIL);
+ qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+ }
+
+ if (hwerrs & QLOGIC_IB_HWE_SERDESPLLFAILED) {
+ /*
+ * If it occurs, it is left masked since the eternal
+ * interface is unused.
+ */
+ dd->cspec->hwerrmask &= ~QLOGIC_IB_HWE_SERDESPLLFAILED;
+ qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+ }
+
+ qib_dev_err(dd, "%s hardware error\n", msg);
+
+ if (isfatal && !dd->diag_client) {
+ qib_dev_err(dd,
+ "Fatal Hardware Error, no longer usable, SN %.16s\n",
+ dd->serial);
+ /*
+ * For /sys status file and user programs to print; if no
+ * trailing brace is copied, we'll know it was truncated.
+ */
+ if (dd->freezemsg)
+ snprintf(dd->freezemsg, dd->freezelen,
+ "{%s}", msg);
+ qib_disable_after_error(dd);
+ }
+bail:;
+}
+
+/**
+ * qib_7220_init_hwerrors - enable hardware errors
+ * @dd: the qlogic_ib device
+ *
+ * now that we have finished initializing everything that might reasonably
+ * cause a hardware error, and cleared those errors bits as they occur,
+ * we can enable hardware errors in the mask (potentially enabling
+ * freeze mode), and enable hardware errors as errors (along with
+ * everything else) in errormask
+ */
+static void qib_7220_init_hwerrors(struct qib_devdata *dd)
+{
+ u64 val;
+ u64 extsval;
+
+ extsval = qib_read_kreg64(dd, kr_extstatus);
+
+ if (!(extsval & (QLOGIC_IB_EXTS_MEMBIST_ENDTEST |
+ QLOGIC_IB_EXTS_MEMBIST_DISABLED)))
+ qib_dev_err(dd, "MemBIST did not complete!\n");
+ if (extsval & QLOGIC_IB_EXTS_MEMBIST_DISABLED)
+ qib_devinfo(dd->pcidev, "MemBIST is disabled.\n");
+
+ val = ~0ULL; /* default to all hwerrors become interrupts, */
+
+ val &= ~QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR;
+ dd->cspec->hwerrmask = val;
+
+ qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed));
+ qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+
+ /* clear all */
+ qib_write_kreg(dd, kr_errclear, ~0ULL);
+ /* enable errors that are masked, at least this first time. */
+ qib_write_kreg(dd, kr_errmask, ~0ULL);
+ dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask);
+ /* clear any interrupts up to this point (ints still not enabled) */
+ qib_write_kreg(dd, kr_intclear, ~0ULL);
+}
+
+/*
+ * Disable and enable the armlaunch error. Used for PIO bandwidth testing
+ * on chips that are count-based, rather than trigger-based. There is no
+ * reference counting, but that's also fine, given the intended use.
+ * Only chip-specific because it's all register accesses
+ */
+static void qib_set_7220_armlaunch(struct qib_devdata *dd, u32 enable)
+{
+ if (enable) {
+ qib_write_kreg(dd, kr_errclear, ERR_MASK(SendPioArmLaunchErr));
+ dd->cspec->errormask |= ERR_MASK(SendPioArmLaunchErr);
+ } else
+ dd->cspec->errormask &= ~ERR_MASK(SendPioArmLaunchErr);
+ qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
+}
+
+/*
+ * Formerly took parameter <which> in pre-shifted,
+ * pre-merged form with LinkCmd and LinkInitCmd
+ * together, and assuming the zero was NOP.
+ */
+static void qib_set_ib_7220_lstate(struct qib_pportdata *ppd, u16 linkcmd,
+ u16 linitcmd)
+{
+ u64 mod_wd;
+ struct qib_devdata *dd = ppd->dd;
+ unsigned long flags;
+
+ if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) {
+ /*
+ * If we are told to disable, note that so link-recovery
+ * code does not attempt to bring us back up.
+ */
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_LINK_DISABLED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) {
+ /*
+ * Any other linkinitcmd will lead to LINKDOWN and then
+ * to INIT (if all is well), so clear flag to let
+ * link-recovery code attempt to bring us back up.
+ */
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ }
+
+ mod_wd = (linkcmd << IBA7220_IBCC_LINKCMD_SHIFT) |
+ (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+
+ qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl | mod_wd);
+ /* write to chip to prevent back-to-back writes of ibc reg */
+ qib_write_kreg(dd, kr_scratch, 0);
+}
+
+/*
+ * All detailed interaction with the SerDes has been moved to qib_sd7220.c
+ *
+ * The portion of IBA7220-specific bringup_serdes() that actually deals with
+ * registers and memory within the SerDes itself is qib_sd7220_init().
+ */
+
+/**
+ * qib_7220_bringup_serdes - bring up the serdes
+ * @ppd: physical port on the qlogic_ib device
+ */
+static int qib_7220_bringup_serdes(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 val, prev_val, guid, ibc;
+ int ret = 0;
+
+ /* Put IBC in reset, sends disabled */
+ dd->control &= ~QLOGIC_IB_C_LINKENABLE;
+ qib_write_kreg(dd, kr_control, 0ULL);
+
+ if (qib_compat_ddr_negotiate) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymsnap = read_7220_creg32(dd, cr_ibsymbolerr);
+ ppd->cpspec->iblnkerrsnap =
+ read_7220_creg32(dd, cr_iblinkerrrecov);
+ }
+
+ /* flowcontrolwatermark is in units of KBytes */
+ ibc = 0x5ULL << SYM_LSB(IBCCtrl, FlowCtrlWaterMark);
+ /*
+ * How often flowctrl sent. More or less in usecs; balance against
+ * watermark value, so that in theory senders always get a flow
+ * control update in time to not let the IB link go idle.
+ */
+ ibc |= 0x3ULL << SYM_LSB(IBCCtrl, FlowCtrlPeriod);
+ /* max error tolerance */
+ ibc |= 0xfULL << SYM_LSB(IBCCtrl, PhyerrThreshold);
+ /* use "real" buffer space for */
+ ibc |= 4ULL << SYM_LSB(IBCCtrl, CreditScale);
+ /* IB credit flow control. */
+ ibc |= 0xfULL << SYM_LSB(IBCCtrl, OverrunThreshold);
+ /*
+ * set initial max size pkt IBC will send, including ICRC; it's the
+ * PIO buffer size in dwords, less 1; also see qib_set_mtu()
+ */
+ ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrl, MaxPktLen);
+ ppd->cpspec->ibcctrl = ibc; /* without linkcmd or linkinitcmd! */
+
+ /* initially come up waiting for TS1, without sending anything. */
+ val = ppd->cpspec->ibcctrl | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
+ QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+ qib_write_kreg(dd, kr_ibcctrl, val);
+
+ if (!ppd->cpspec->ibcddrctrl) {
+ /* not on re-init after reset */
+ ppd->cpspec->ibcddrctrl = qib_read_kreg64(dd, kr_ibcddrctrl);
+
+ if (ppd->link_speed_enabled == (QIB_IB_SDR | QIB_IB_DDR))
+ ppd->cpspec->ibcddrctrl |=
+ IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ else
+ ppd->cpspec->ibcddrctrl |=
+ ppd->link_speed_enabled == QIB_IB_DDR ?
+ IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
+ if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) ==
+ (IB_WIDTH_1X | IB_WIDTH_4X))
+ ppd->cpspec->ibcddrctrl |= IBA7220_IBC_WIDTH_AUTONEG;
+ else
+ ppd->cpspec->ibcddrctrl |=
+ ppd->link_width_enabled == IB_WIDTH_4X ?
+ IBA7220_IBC_WIDTH_4X_ONLY :
+ IBA7220_IBC_WIDTH_1X_ONLY;
+
+ /* always enable these on driver reload, not sticky */
+ ppd->cpspec->ibcddrctrl |=
+ IBA7220_IBC_RXPOL_MASK << IBA7220_IBC_RXPOL_SHIFT;
+ ppd->cpspec->ibcddrctrl |=
+ IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
+
+ /* enable automatic lane reversal detection for receive */
+ ppd->cpspec->ibcddrctrl |= IBA7220_IBC_LANE_REV_SUPPORTED;
+ } else
+ /* write to chip to prevent back-to-back writes of ibc reg */
+ qib_write_kreg(dd, kr_scratch, 0);
+
+ qib_write_kreg(dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+
+ qib_write_kreg(dd, kr_ncmodectrl, 0Ull);
+ qib_write_kreg(dd, kr_scratch, 0);
+
+ ret = qib_sd7220_init(dd);
+
+ val = qib_read_kreg64(dd, kr_xgxs_cfg);
+ prev_val = val;
+ val |= QLOGIC_IB_XGXS_FC_SAFE;
+ if (val != prev_val) {
+ qib_write_kreg(dd, kr_xgxs_cfg, val);
+ qib_read_kreg32(dd, kr_scratch);
+ }
+ if (val & QLOGIC_IB_XGXS_RESET)
+ val &= ~QLOGIC_IB_XGXS_RESET;
+ if (val != prev_val)
+ qib_write_kreg(dd, kr_xgxs_cfg, val);
+
+ /* first time through, set port guid */
+ if (!ppd->guid)
+ ppd->guid = dd->base_guid;
+ guid = be64_to_cpu(ppd->guid);
+
+ qib_write_kreg(dd, kr_hrtbt_guid, guid);
+ if (!ret) {
+ dd->control |= QLOGIC_IB_C_LINKENABLE;
+ qib_write_kreg(dd, kr_control, dd->control);
+ } else
+ /* write to chip to prevent back-to-back writes of ibc reg */
+ qib_write_kreg(dd, kr_scratch, 0);
+ return ret;
+}
+
+/**
+ * qib_7220_quiet_serdes - set serdes to txidle
+ * @ppd: physical port of the qlogic_ib device
+ * Called when driver is being unloaded
+ */
+static void qib_7220_quiet_serdes(struct qib_pportdata *ppd)
+{
+ u64 val;
+ struct qib_devdata *dd = ppd->dd;
+ unsigned long flags;
+
+ /* disable IBC */
+ dd->control &= ~QLOGIC_IB_C_LINKENABLE;
+ qib_write_kreg(dd, kr_control,
+ dd->control | QLOGIC_IB_C_FREEZEMODE);
+
+ ppd->cpspec->chase_end = 0;
+ if (ppd->cpspec->chase_timer.function) /* if initted */
+ del_timer_sync(&ppd->cpspec->chase_timer);
+
+ if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta ||
+ ppd->cpspec->ibdeltainprog) {
+ u64 diagc;
+
+ /* enable counter writes */
+ diagc = qib_read_kreg64(dd, kr_hwdiagctrl);
+ qib_write_kreg(dd, kr_hwdiagctrl,
+ diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable));
+
+ if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) {
+ val = read_7220_creg32(dd, cr_ibsymbolerr);
+ if (ppd->cpspec->ibdeltainprog)
+ val -= val - ppd->cpspec->ibsymsnap;
+ val -= ppd->cpspec->ibsymdelta;
+ write_7220_creg(dd, cr_ibsymbolerr, val);
+ }
+ if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) {
+ val = read_7220_creg32(dd, cr_iblinkerrrecov);
+ if (ppd->cpspec->ibdeltainprog)
+ val -= val - ppd->cpspec->iblnkerrsnap;
+ val -= ppd->cpspec->iblnkerrdelta;
+ write_7220_creg(dd, cr_iblinkerrrecov, val);
+ }
+
+ /* and disable counter writes */
+ qib_write_kreg(dd, kr_hwdiagctrl, diagc);
+ }
+ qib_set_ib_7220_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ wake_up(&ppd->cpspec->autoneg_wait);
+ cancel_delayed_work_sync(&ppd->cpspec->autoneg_work);
+
+ shutdown_7220_relock_poll(ppd->dd);
+ val = qib_read_kreg64(ppd->dd, kr_xgxs_cfg);
+ val |= QLOGIC_IB_XGXS_RESET;
+ qib_write_kreg(ppd->dd, kr_xgxs_cfg, val);
+}
+
+/**
+ * qib_setup_7220_setextled - set the state of the two external LEDs
+ * @ppd: the qlogic_ib device
+ * @on: whether the link is up or not
+ *
+ * The exact combo of LEDs if on is true is determined by looking
+ * at the ibcstatus.
+ *
+ * These LEDs indicate the physical and logical state of IB link.
+ * For this chip (at least with recommended board pinouts), LED1
+ * is Yellow (logical state) and LED2 is Green (physical state),
+ *
+ * Note: We try to match the Mellanox HCA LED behavior as best
+ * we can. Green indicates physical link state is OK (something is
+ * plugged in, and we can train).
+ * Amber indicates the link is logically up (ACTIVE).
+ * Mellanox further blinks the amber LED to indicate data packet
+ * activity, but we have no hardware support for that, so it would
+ * require waking up every 10-20 msecs and checking the counters
+ * on the chip, and then turning the LED off if appropriate. That's
+ * visible overhead, so not something we will do.
+ *
+ */
+static void qib_setup_7220_setextled(struct qib_pportdata *ppd, u32 on)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 extctl, ledblink = 0, val, lst, ltst;
+ unsigned long flags;
+
+ /*
+ * The diags use the LED to indicate diag info, so we leave
+ * the external LED alone when the diags are running.
+ */
+ if (dd->diag_client)
+ return;
+
+ if (ppd->led_override) {
+ ltst = (ppd->led_override & QIB_LED_PHYS) ?
+ IB_PHYSPORTSTATE_LINKUP : IB_PHYSPORTSTATE_DISABLED,
+ lst = (ppd->led_override & QIB_LED_LOG) ?
+ IB_PORT_ACTIVE : IB_PORT_DOWN;
+ } else if (on) {
+ val = qib_read_kreg64(dd, kr_ibcstatus);
+ ltst = qib_7220_phys_portstate(val);
+ lst = qib_7220_iblink_state(val);
+ } else {
+ ltst = 0;
+ lst = 0;
+ }
+
+ spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+ extctl = dd->cspec->extctrl & ~(SYM_MASK(EXTCtrl, LEDPriPortGreenOn) |
+ SYM_MASK(EXTCtrl, LEDPriPortYellowOn));
+ if (ltst == IB_PHYSPORTSTATE_LINKUP) {
+ extctl |= SYM_MASK(EXTCtrl, LEDPriPortGreenOn);
+ /*
+ * counts are in chip clock (4ns) periods.
+ * This is 1/16 sec (66.6ms) on,
+ * 3/16 sec (187.5 ms) off, with packets rcvd
+ */
+ ledblink = ((66600 * 1000UL / 4) << IBA7220_LEDBLINK_ON_SHIFT)
+ | ((187500 * 1000UL / 4) << IBA7220_LEDBLINK_OFF_SHIFT);
+ }
+ if (lst == IB_PORT_ACTIVE)
+ extctl |= SYM_MASK(EXTCtrl, LEDPriPortYellowOn);
+ dd->cspec->extctrl = extctl;
+ qib_write_kreg(dd, kr_extctrl, extctl);
+ spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+
+ if (ledblink) /* blink the LED on packet receive */
+ qib_write_kreg(dd, kr_rcvpktledcnt, ledblink);
+}
+
+/*
+ * qib_setup_7220_cleanup - clean up any per-chip chip-specific stuff
+ * @dd: the qlogic_ib device
+ *
+ * This is called during driver unload.
+ *
+ */
+static void qib_setup_7220_cleanup(struct qib_devdata *dd)
+{
+ qib_free_irq(dd);
+ kfree(dd->cspec->cntrs);
+ kfree(dd->cspec->portcntrs);
+}
+
+/*
+ * This is only called for SDmaInt.
+ * SDmaDisabled is handled on the error path.
+ */
+static void sdma_7220_intr(struct qib_pportdata *ppd, u64 istat)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ppd->sdma_lock, flags);
+
+ switch (ppd->sdma_state.current_state) {
+ case qib_sdma_state_s00_hw_down:
+ break;
+
+ case qib_sdma_state_s10_hw_start_up_wait:
+ __qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started);
+ break;
+
+ case qib_sdma_state_s20_idle:
+ break;
+
+ case qib_sdma_state_s30_sw_clean_up_wait:
+ break;
+
+ case qib_sdma_state_s40_hw_clean_up_wait:
+ break;
+
+ case qib_sdma_state_s50_hw_halt_wait:
+ __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted);
+ break;
+
+ case qib_sdma_state_s99_running:
+ /* too chatty to print here */
+ __qib_sdma_intr(ppd);
+ break;
+ }
+ spin_unlock_irqrestore(&ppd->sdma_lock, flags);
+}
+
+static void qib_wantpiobuf_7220_intr(struct qib_devdata *dd, u32 needint)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ if (needint) {
+ if (!(dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd)))
+ goto done;
+ /*
+ * blip the availupd off, next write will be on, so
+ * we ensure an avail update, regardless of threshold or
+ * buffers becoming free, whenever we want an interrupt
+ */
+ qib_write_kreg(dd, kr_sendctrl, dd->sendctrl &
+ ~SYM_MASK(SendCtrl, SendBufAvailUpd));
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+ dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail);
+ } else
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail);
+ qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0ULL);
+done:
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+}
+
+/*
+ * Handle errors and unusual events first, separate function
+ * to improve cache hits for fast path interrupt handling.
+ */
+static noinline void unlikely_7220_intr(struct qib_devdata *dd, u64 istat)
+{
+ if (unlikely(istat & ~QLOGIC_IB_I_BITSEXTANT))
+ qib_dev_err(dd,
+ "interrupt with unknown interrupts %Lx set\n",
+ istat & ~QLOGIC_IB_I_BITSEXTANT);
+
+ if (istat & QLOGIC_IB_I_GPIO) {
+ u32 gpiostatus;
+
+ /*
+ * Boards for this chip currently don't use GPIO interrupts,
+ * so clear by writing GPIOstatus to GPIOclear, and complain
+ * to alert developer. To avoid endless repeats, clear
+ * the bits in the mask, since there is some kind of
+ * programming error or chip problem.
+ */
+ gpiostatus = qib_read_kreg32(dd, kr_gpio_status);
+ /*
+ * In theory, writing GPIOstatus to GPIOclear could
+ * have a bad side-effect on some diagnostic that wanted
+ * to poll for a status-change, but the various shadows
+ * make that problematic at best. Diags will just suppress
+ * all GPIO interrupts during such tests.
+ */
+ qib_write_kreg(dd, kr_gpio_clear, gpiostatus);
+
+ if (gpiostatus) {
+ const u32 mask = qib_read_kreg32(dd, kr_gpio_mask);
+ u32 gpio_irq = mask & gpiostatus;
+
+ /*
+ * A bit set in status and (chip) Mask register
+ * would cause an interrupt. Since we are not
+ * expecting any, report it. Also check that the
+ * chip reflects our shadow, report issues,
+ * and refresh from the shadow.
+ */
+ /*
+ * Clear any troublemakers, and update chip
+ * from shadow
+ */
+ dd->cspec->gpio_mask &= ~gpio_irq;
+ qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
+ }
+ }
+
+ if (istat & QLOGIC_IB_I_ERROR) {
+ u64 estat;
+
+ qib_stats.sps_errints++;
+ estat = qib_read_kreg64(dd, kr_errstatus);
+ if (!estat)
+ qib_devinfo(dd->pcidev,
+ "error interrupt (%Lx), but no error bits set!\n",
+ istat);
+ else
+ handle_7220_errors(dd, estat);
+ }
+}
+
+static irqreturn_t qib_7220intr(int irq, void *data)
+{
+ struct qib_devdata *dd = data;
+ irqreturn_t ret;
+ u64 istat;
+ u64 ctxtrbits;
+ u64 rmask;
+ unsigned i;
+
+ if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) {
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ ret = IRQ_HANDLED;
+ goto bail;
+ }
+
+ istat = qib_read_kreg64(dd, kr_intstatus);
+
+ if (unlikely(!istat)) {
+ ret = IRQ_NONE; /* not our interrupt, or already handled */
+ goto bail;
+ }
+ if (unlikely(istat == -1)) {
+ qib_bad_intrstatus(dd);
+ /* don't know if it was our interrupt or not */
+ ret = IRQ_NONE;
+ goto bail;
+ }
+
+ this_cpu_inc(*dd->int_counter);
+ if (unlikely(istat & (~QLOGIC_IB_I_BITSEXTANT |
+ QLOGIC_IB_I_GPIO | QLOGIC_IB_I_ERROR)))
+ unlikely_7220_intr(dd, istat);
+
+ /*
+ * Clear the interrupt bits we found set, relatively early, so we
+ * "know" know the chip will have seen this by the time we process
+ * the queue, and will re-interrupt if necessary. The processor
+ * itself won't take the interrupt again until we return.
+ */
+ qib_write_kreg(dd, kr_intclear, istat);
+
+ /*
+ * Handle kernel receive queues before checking for pio buffers
+ * available since receives can overflow; piobuf waiters can afford
+ * a few extra cycles, since they were waiting anyway.
+ */
+ ctxtrbits = istat &
+ ((QLOGIC_IB_I_RCVAVAIL_MASK << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
+ (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT));
+ if (ctxtrbits) {
+ rmask = (1ULL << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
+ (1ULL << QLOGIC_IB_I_RCVURG_SHIFT);
+ for (i = 0; i < dd->first_user_ctxt; i++) {
+ if (ctxtrbits & rmask) {
+ ctxtrbits &= ~rmask;
+ qib_kreceive(dd->rcd[i], NULL, NULL);
+ }
+ rmask <<= 1;
+ }
+ if (ctxtrbits) {
+ ctxtrbits =
+ (ctxtrbits >> QLOGIC_IB_I_RCVAVAIL_SHIFT) |
+ (ctxtrbits >> QLOGIC_IB_I_RCVURG_SHIFT);
+ qib_handle_urcv(dd, ctxtrbits);
+ }
+ }
+
+ /* only call for SDmaInt */
+ if (istat & QLOGIC_IB_I_SDMAINT)
+ sdma_7220_intr(dd->pport, istat);
+
+ if ((istat & QLOGIC_IB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED))
+ qib_ib_piobufavail(dd);
+
+ ret = IRQ_HANDLED;
+bail:
+ return ret;
+}
+
+/*
+ * Set up our chip-specific interrupt handler.
+ * The interrupt type has already been setup, so
+ * we just need to do the registration and error checking.
+ * If we are using MSI interrupts, we may fall back to
+ * INTx later, if the interrupt handler doesn't get called
+ * within 1/2 second (see verify_interrupt()).
+ */
+static void qib_setup_7220_interrupt(struct qib_devdata *dd)
+{
+ int ret;
+
+ ret = pci_request_irq(dd->pcidev, 0, qib_7220intr, NULL, dd,
+ QIB_DRV_NAME);
+ if (ret)
+ qib_dev_err(dd, "Couldn't setup %s interrupt (irq=%d): %d\n",
+ dd->pcidev->msi_enabled ? "MSI" : "INTx",
+ pci_irq_vector(dd->pcidev, 0), ret);
+}
+
+/**
+ * qib_7220_boardname - fill in the board name
+ * @dd: the qlogic_ib device
+ *
+ * info is based on the board revision register
+ */
+static void qib_7220_boardname(struct qib_devdata *dd)
+{
+ u32 boardid;
+
+ boardid = SYM_FIELD(dd->revision, Revision,
+ BoardID);
+
+ switch (boardid) {
+ case 1:
+ dd->boardname = "InfiniPath_QLE7240";
+ break;
+ case 2:
+ dd->boardname = "InfiniPath_QLE7280";
+ break;
+ default:
+ qib_dev_err(dd, "Unknown 7220 board with ID %u\n", boardid);
+ dd->boardname = "Unknown_InfiniPath_7220";
+ break;
+ }
+
+ if (dd->majrev != 5 || !dd->minrev || dd->minrev > 2)
+ qib_dev_err(dd,
+ "Unsupported InfiniPath hardware revision %u.%u!\n",
+ dd->majrev, dd->minrev);
+
+ snprintf(dd->boardversion, sizeof(dd->boardversion),
+ "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
+ QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname,
+ (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch),
+ dd->majrev, dd->minrev,
+ (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW));
+}
+
+/*
+ * This routine sleeps, so it can only be called from user context, not
+ * from interrupt context.
+ */
+static int qib_setup_7220_reset(struct qib_devdata *dd)
+{
+ u64 val;
+ int i;
+ int ret;
+ u16 cmdval;
+ u8 int_line, clinesz;
+ unsigned long flags;
+
+ qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz);
+
+ /* Use dev_err so it shows up in logs, etc. */
+ qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit);
+
+ /* no interrupts till re-initted */
+ qib_7220_set_intr_state(dd, 0);
+
+ dd->pport->cpspec->ibdeltainprog = 0;
+ dd->pport->cpspec->ibsymdelta = 0;
+ dd->pport->cpspec->iblnkerrdelta = 0;
+
+ /*
+ * Keep chip from being accessed until we are ready. Use
+ * writeq() directly, to allow the write even though QIB_PRESENT
+ * isn't set.
+ */
+ dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
+ /* so we check interrupts work again */
+ dd->z_int_counter = qib_int_counter(dd);
+ val = dd->control | QLOGIC_IB_C_RESET;
+ writeq(val, &dd->kregbase[kr_control]);
+ mb(); /* prevent compiler reordering around actual reset */
+
+ for (i = 1; i <= 5; i++) {
+ /*
+ * Allow MBIST, etc. to complete; longer on each retry.
+ * We sometimes get machine checks from bus timeout if no
+ * response, so for now, make it *really* long.
+ */
+ msleep(1000 + (1 + i) * 2000);
+
+ qib_pcie_reenable(dd, cmdval, int_line, clinesz);
+
+ /*
+ * Use readq directly, so we don't need to mark it as PRESENT
+ * until we get a successful indication that all is well.
+ */
+ val = readq(&dd->kregbase[kr_revision]);
+ if (val == dd->revision) {
+ dd->flags |= QIB_PRESENT; /* it's back */
+ ret = qib_reinit_intr(dd);
+ goto bail;
+ }
+ }
+ ret = 0; /* failed */
+
+bail:
+ if (ret) {
+ if (qib_pcie_params(dd, dd->lbus_width, NULL))
+ qib_dev_err(dd,
+ "Reset failed to setup PCIe or interrupts; continuing anyway\n");
+
+ /* hold IBC in reset, no sends, etc till later */
+ qib_write_kreg(dd, kr_control, 0ULL);
+
+ /* clear the reset error, init error/hwerror mask */
+ qib_7220_init_hwerrors(dd);
+
+ /* do setup similar to speed or link-width changes */
+ if (dd->pport->cpspec->ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK)
+ dd->cspec->presets_needed = 1;
+ spin_lock_irqsave(&dd->pport->lflags_lock, flags);
+ dd->pport->lflags |= QIBL_IB_FORCE_NOTIFY;
+ dd->pport->lflags &= ~QIBL_IB_AUTONEG_FAILED;
+ spin_unlock_irqrestore(&dd->pport->lflags_lock, flags);
+ }
+
+ return ret;
+}
+
+/**
+ * qib_7220_put_tid - write a TID to the chip
+ * @dd: the qlogic_ib device
+ * @tidptr: pointer to the expected TID (in chip) to update
+ * @type: 0 for eager, 1 for expected
+ * @pa: physical address of in memory buffer; tidinvalid if freeing
+ */
+static void qib_7220_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr,
+ u32 type, unsigned long pa)
+{
+ if (pa != dd->tidinvalid) {
+ u64 chippa = pa >> IBA7220_TID_PA_SHIFT;
+
+ /* paranoia checks */
+ if (pa != (chippa << IBA7220_TID_PA_SHIFT)) {
+ qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
+ pa);
+ return;
+ }
+ if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
+ qib_dev_err(dd,
+ "Physical page address 0x%lx larger than supported\n",
+ pa);
+ return;
+ }
+
+ if (type == RCVHQ_RCV_TYPE_EAGER)
+ chippa |= dd->tidtemplate;
+ else /* for now, always full 4KB page */
+ chippa |= IBA7220_TID_SZ_4K;
+ pa = chippa;
+ }
+ writeq(pa, tidptr);
+}
+
+/**
+ * qib_7220_clear_tids - clear all TID entries for a ctxt, expected and eager
+ * @dd: the qlogic_ib device
+ * @rcd: the ctxt
+ *
+ * clear all TID entries for a ctxt, expected and eager.
+ * Used from qib_close(). On this chip, TIDs are only 32 bits,
+ * not 64, but they are still on 64 bit boundaries, so tidbase
+ * is declared as u64 * for the pointer math, even though we write 32 bits
+ */
+static void qib_7220_clear_tids(struct qib_devdata *dd,
+ struct qib_ctxtdata *rcd)
+{
+ u64 __iomem *tidbase;
+ unsigned long tidinv;
+ u32 ctxt;
+ int i;
+
+ if (!dd->kregbase || !rcd)
+ return;
+
+ ctxt = rcd->ctxt;
+
+ tidinv = dd->tidinvalid;
+ tidbase = (u64 __iomem *)
+ ((char __iomem *)(dd->kregbase) +
+ dd->rcvtidbase +
+ ctxt * dd->rcvtidcnt * sizeof(*tidbase));
+
+ for (i = 0; i < dd->rcvtidcnt; i++)
+ qib_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
+ tidinv);
+
+ tidbase = (u64 __iomem *)
+ ((char __iomem *)(dd->kregbase) +
+ dd->rcvegrbase +
+ rcd->rcvegr_tid_base * sizeof(*tidbase));
+
+ for (i = 0; i < rcd->rcvegrcnt; i++)
+ qib_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
+ tidinv);
+}
+
+/**
+ * qib_7220_tidtemplate - setup constants for TID updates
+ * @dd: the qlogic_ib device
+ *
+ * We setup stuff that we use a lot, to avoid calculating each time
+ */
+static void qib_7220_tidtemplate(struct qib_devdata *dd)
+{
+ if (dd->rcvegrbufsize == 2048)
+ dd->tidtemplate = IBA7220_TID_SZ_2K;
+ else if (dd->rcvegrbufsize == 4096)
+ dd->tidtemplate = IBA7220_TID_SZ_4K;
+ dd->tidinvalid = 0;
+}
+
+/**
+ * qib_7220_get_base_info - set chip-specific flags for user code
+ * @rcd: the qlogic_ib ctxt
+ * @kinfo: qib_base_info pointer
+ *
+ * We set the PCIE flag because the lower bandwidth on PCIe vs
+ * HyperTransport can affect some user packet algorithims.
+ */
+static int qib_7220_get_base_info(struct qib_ctxtdata *rcd,
+ struct qib_base_info *kinfo)
+{
+ kinfo->spi_runtime_flags |= QIB_RUNTIME_PCIE |
+ QIB_RUNTIME_NODMA_RTAIL | QIB_RUNTIME_SDMA;
+
+ if (rcd->dd->flags & QIB_USE_SPCL_TRIG)
+ kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER;
+
+ return 0;
+}
+
+static struct qib_message_header *
+qib_7220_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr)
+{
+ u32 offset = qib_hdrget_offset(rhf_addr);
+
+ return (struct qib_message_header *)
+ (rhf_addr - dd->rhf_offset + offset);
+}
+
+static void qib_7220_config_ctxts(struct qib_devdata *dd)
+{
+ unsigned long flags;
+ u32 nchipctxts;
+
+ nchipctxts = qib_read_kreg32(dd, kr_portcnt);
+ dd->cspec->numctxts = nchipctxts;
+ if (qib_n_krcv_queues > 1) {
+ dd->qpn_mask = 0x3e;
+ dd->first_user_ctxt = qib_n_krcv_queues * dd->num_pports;
+ if (dd->first_user_ctxt > nchipctxts)
+ dd->first_user_ctxt = nchipctxts;
+ } else
+ dd->first_user_ctxt = dd->num_pports;
+ dd->n_krcv_queues = dd->first_user_ctxt;
+
+ if (!qib_cfgctxts) {
+ int nctxts = dd->first_user_ctxt + num_online_cpus();
+
+ if (nctxts <= 5)
+ dd->ctxtcnt = 5;
+ else if (nctxts <= 9)
+ dd->ctxtcnt = 9;
+ else if (nctxts <= nchipctxts)
+ dd->ctxtcnt = nchipctxts;
+ } else if (qib_cfgctxts <= nchipctxts)
+ dd->ctxtcnt = qib_cfgctxts;
+ if (!dd->ctxtcnt) /* none of the above, set to max */
+ dd->ctxtcnt = nchipctxts;
+
+ /*
+ * Chip can be configured for 5, 9, or 17 ctxts, and choice
+ * affects number of eager TIDs per ctxt (1K, 2K, 4K).
+ * Lock to be paranoid about later motion, etc.
+ */
+ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
+ if (dd->ctxtcnt > 9)
+ dd->rcvctrl |= 2ULL << IBA7220_R_CTXTCFG_SHIFT;
+ else if (dd->ctxtcnt > 5)
+ dd->rcvctrl |= 1ULL << IBA7220_R_CTXTCFG_SHIFT;
+ /* else configure for default 5 receive ctxts */
+ if (dd->qpn_mask)
+ dd->rcvctrl |= 1ULL << QIB_7220_RcvCtrl_RcvQPMapEnable_LSB;
+ qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
+ spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+
+ /* kr_rcvegrcnt changes based on the number of contexts enabled */
+ dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt);
+ dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, IBA7220_KRCVEGRCNT);
+}
+
+static int qib_7220_get_ib_cfg(struct qib_pportdata *ppd, int which)
+{
+ int lsb, ret = 0;
+ u64 maskr; /* right-justified mask */
+
+ switch (which) {
+ case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */
+ ret = ppd->link_width_enabled;
+ goto done;
+
+ case QIB_IB_CFG_LWID: /* Get currently active Link-width */
+ ret = ppd->link_width_active;
+ goto done;
+
+ case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */
+ ret = ppd->link_speed_enabled;
+ goto done;
+
+ case QIB_IB_CFG_SPD: /* Get current Link spd */
+ ret = ppd->link_speed_active;
+ goto done;
+
+ case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */
+ lsb = IBA7220_IBC_RXPOL_SHIFT;
+ maskr = IBA7220_IBC_RXPOL_MASK;
+ break;
+
+ case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */
+ lsb = IBA7220_IBC_LREV_SHIFT;
+ maskr = IBA7220_IBC_LREV_MASK;
+ break;
+
+ case QIB_IB_CFG_LINKLATENCY:
+ ret = qib_read_kreg64(ppd->dd, kr_ibcddrstatus)
+ & IBA7220_DDRSTAT_LINKLAT_MASK;
+ goto done;
+
+ case QIB_IB_CFG_OP_VLS:
+ ret = ppd->vls_operational;
+ goto done;
+
+ case QIB_IB_CFG_VL_HIGH_CAP:
+ ret = 0;
+ goto done;
+
+ case QIB_IB_CFG_VL_LOW_CAP:
+ ret = 0;
+ goto done;
+
+ case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
+ ret = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
+ OverrunThreshold);
+ goto done;
+
+ case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
+ ret = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
+ PhyerrThreshold);
+ goto done;
+
+ case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
+ /* will only take effect when the link state changes */
+ ret = (ppd->cpspec->ibcctrl &
+ SYM_MASK(IBCCtrl, LinkDownDefaultState)) ?
+ IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL;
+ goto done;
+
+ case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
+ lsb = IBA7220_IBC_HRTBT_SHIFT;
+ maskr = IBA7220_IBC_HRTBT_MASK;
+ break;
+
+ case QIB_IB_CFG_PMA_TICKS:
+ /*
+ * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs
+ * Since the clock is always 250MHz, the value is 1 or 0.
+ */
+ ret = (ppd->link_speed_active == QIB_IB_DDR);
+ goto done;
+
+ default:
+ ret = -EINVAL;
+ goto done;
+ }
+ ret = (int)((ppd->cpspec->ibcddrctrl >> lsb) & maskr);
+done:
+ return ret;
+}
+
+static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 maskr; /* right-justified mask */
+ int lsb, ret = 0, setforce = 0;
+ u16 lcmd, licmd;
+ unsigned long flags;
+ u32 tmp = 0;
+
+ switch (which) {
+ case QIB_IB_CFG_LIDLMC:
+ /*
+ * Set LID and LMC. Combined to avoid possible hazard
+ * caller puts LMC in 16MSbits, DLID in 16LSbits of val
+ */
+ lsb = IBA7220_IBC_DLIDLMC_SHIFT;
+ maskr = IBA7220_IBC_DLIDLMC_MASK;
+ break;
+
+ case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */
+ /*
+ * As with speed, only write the actual register if
+ * the link is currently down, otherwise takes effect
+ * on next link change.
+ */
+ ppd->link_width_enabled = val;
+ if (!(ppd->lflags & QIBL_LINKDOWN))
+ goto bail;
+ /*
+ * We set the QIBL_IB_FORCE_NOTIFY bit so updown
+ * will get called because we want update
+ * link_width_active, and the change may not take
+ * effect for some time (if we are in POLL), so this
+ * flag will force the updown routine to be called
+ * on the next ibstatuschange down interrupt, even
+ * if it's not an down->up transition.
+ */
+ val--; /* convert from IB to chip */
+ maskr = IBA7220_IBC_WIDTH_MASK;
+ lsb = IBA7220_IBC_WIDTH_SHIFT;
+ setforce = 1;
+ break;
+
+ case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */
+ /*
+ * If we turn off IB1.2, need to preset SerDes defaults,
+ * but not right now. Set a flag for the next time
+ * we command the link down. As with width, only write the
+ * actual register if the link is currently down, otherwise
+ * takes effect on next link change. Since setting is being
+ * explicitly requested (via MAD or sysfs), clear autoneg
+ * failure status if speed autoneg is enabled.
+ */
+ ppd->link_speed_enabled = val;
+ if ((ppd->cpspec->ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK) &&
+ !(val & (val - 1)))
+ dd->cspec->presets_needed = 1;
+ if (!(ppd->lflags & QIBL_LINKDOWN))
+ goto bail;
+ /*
+ * We set the QIBL_IB_FORCE_NOTIFY bit so updown
+ * will get called because we want update
+ * link_speed_active, and the change may not take
+ * effect for some time (if we are in POLL), so this
+ * flag will force the updown routine to be called
+ * on the next ibstatuschange down interrupt, even
+ * if it's not an down->up transition.
+ */
+ if (val == (QIB_IB_SDR | QIB_IB_DDR)) {
+ val = IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ } else
+ val = val == QIB_IB_DDR ?
+ IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
+ maskr = IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ /* IBTA 1.2 mode + speed bits are contiguous */
+ lsb = SYM_LSB(IBCDDRCtrl, IB_ENHANCED_MODE);
+ setforce = 1;
+ break;
+
+ case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */
+ lsb = IBA7220_IBC_RXPOL_SHIFT;
+ maskr = IBA7220_IBC_RXPOL_MASK;
+ break;
+
+ case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */
+ lsb = IBA7220_IBC_LREV_SHIFT;
+ maskr = IBA7220_IBC_LREV_MASK;
+ break;
+
+ case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
+ maskr = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
+ OverrunThreshold);
+ if (maskr != val) {
+ ppd->cpspec->ibcctrl &=
+ ~SYM_MASK(IBCCtrl, OverrunThreshold);
+ ppd->cpspec->ibcctrl |= (u64) val <<
+ SYM_LSB(IBCCtrl, OverrunThreshold);
+ qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+ goto bail;
+
+ case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
+ maskr = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
+ PhyerrThreshold);
+ if (maskr != val) {
+ ppd->cpspec->ibcctrl &=
+ ~SYM_MASK(IBCCtrl, PhyerrThreshold);
+ ppd->cpspec->ibcctrl |= (u64) val <<
+ SYM_LSB(IBCCtrl, PhyerrThreshold);
+ qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+ goto bail;
+
+ case QIB_IB_CFG_PKEYS: /* update pkeys */
+ maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) |
+ ((u64) ppd->pkeys[2] << 32) |
+ ((u64) ppd->pkeys[3] << 48);
+ qib_write_kreg(dd, kr_partitionkey, maskr);
+ goto bail;
+
+ case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
+ /* will only take effect when the link state changes */
+ if (val == IB_LINKINITCMD_POLL)
+ ppd->cpspec->ibcctrl &=
+ ~SYM_MASK(IBCCtrl, LinkDownDefaultState);
+ else /* SLEEP */
+ ppd->cpspec->ibcctrl |=
+ SYM_MASK(IBCCtrl, LinkDownDefaultState);
+ qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ goto bail;
+
+ case QIB_IB_CFG_MTU: /* update the MTU in IBC */
+ /*
+ * Update our housekeeping variables, and set IBC max
+ * size, same as init code; max IBC is max we allow in
+ * buffer, less the qword pbc, plus 1 for ICRC, in dwords
+ * Set even if it's unchanged, print debug message only
+ * on changes.
+ */
+ val = (ppd->ibmaxlen >> 2) + 1;
+ ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, MaxPktLen);
+ ppd->cpspec->ibcctrl |= (u64)val << SYM_LSB(IBCCtrl, MaxPktLen);
+ qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ goto bail;
+
+ case QIB_IB_CFG_LSTATE: /* set the IB link state */
+ switch (val & 0xffff0000) {
+ case IB_LINKCMD_DOWN:
+ lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN;
+ if (!ppd->cpspec->ibdeltainprog &&
+ qib_compat_ddr_negotiate) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymsnap =
+ read_7220_creg32(dd, cr_ibsymbolerr);
+ ppd->cpspec->iblnkerrsnap =
+ read_7220_creg32(dd, cr_iblinkerrrecov);
+ }
+ break;
+
+ case IB_LINKCMD_ARMED:
+ lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED;
+ break;
+
+ case IB_LINKCMD_ACTIVE:
+ lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE;
+ break;
+
+ default:
+ ret = -EINVAL;
+ qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16);
+ goto bail;
+ }
+ switch (val & 0xffff) {
+ case IB_LINKINITCMD_NOP:
+ licmd = 0;
+ break;
+
+ case IB_LINKINITCMD_POLL:
+ licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL;
+ break;
+
+ case IB_LINKINITCMD_SLEEP:
+ licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP;
+ break;
+
+ case IB_LINKINITCMD_DISABLE:
+ licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE;
+ ppd->cpspec->chase_end = 0;
+ /*
+ * stop state chase counter and timer, if running.
+ * wait forpending timer, but don't clear .data (ppd)!
+ */
+ if (ppd->cpspec->chase_timer.expires) {
+ del_timer_sync(&ppd->cpspec->chase_timer);
+ ppd->cpspec->chase_timer.expires = 0;
+ }
+ break;
+
+ default:
+ ret = -EINVAL;
+ qib_dev_err(dd, "bad linkinitcmd req 0x%x\n",
+ val & 0xffff);
+ goto bail;
+ }
+ qib_set_ib_7220_lstate(ppd, lcmd, licmd);
+
+ maskr = IBA7220_IBC_WIDTH_MASK;
+ lsb = IBA7220_IBC_WIDTH_SHIFT;
+ tmp = (ppd->cpspec->ibcddrctrl >> lsb) & maskr;
+ /* If the width active on the chip does not match the
+ * width in the shadow register, write the new active
+ * width to the chip.
+ * We don't have to worry about speed as the speed is taken
+ * care of by set_7220_ibspeed_fast called by ib_updown.
+ */
+ if (ppd->link_width_enabled-1 != tmp) {
+ ppd->cpspec->ibcddrctrl &= ~(maskr << lsb);
+ ppd->cpspec->ibcddrctrl |=
+ (((u64)(ppd->link_width_enabled-1) & maskr) <<
+ lsb);
+ qib_write_kreg(dd, kr_ibcddrctrl,
+ ppd->cpspec->ibcddrctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ }
+ goto bail;
+
+ case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
+ if (val > IBA7220_IBC_HRTBT_MASK) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ lsb = IBA7220_IBC_HRTBT_SHIFT;
+ maskr = IBA7220_IBC_HRTBT_MASK;
+ break;
+
+ default:
+ ret = -EINVAL;
+ goto bail;
+ }
+ ppd->cpspec->ibcddrctrl &= ~(maskr << lsb);
+ ppd->cpspec->ibcddrctrl |= (((u64) val & maskr) << lsb);
+ qib_write_kreg(dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ if (setforce) {
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ }
+bail:
+ return ret;
+}
+
+static int qib_7220_set_loopback(struct qib_pportdata *ppd, const char *what)
+{
+ int ret = 0;
+ u64 val, ddr;
+
+ if (!strncmp(what, "ibc", 3)) {
+ ppd->cpspec->ibcctrl |= SYM_MASK(IBCCtrl, Loopback);
+ val = 0; /* disable heart beat, so link will come up */
+ qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n",
+ ppd->dd->unit, ppd->port);
+ } else if (!strncmp(what, "off", 3)) {
+ ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback);
+ /* enable heart beat again */
+ val = IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
+ qib_devinfo(ppd->dd->pcidev,
+ "Disabling IB%u:%u IBC loopback (normal)\n",
+ ppd->dd->unit, ppd->port);
+ } else
+ ret = -EINVAL;
+ if (!ret) {
+ qib_write_kreg(ppd->dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
+ ddr = ppd->cpspec->ibcddrctrl & ~(IBA7220_IBC_HRTBT_MASK
+ << IBA7220_IBC_HRTBT_SHIFT);
+ ppd->cpspec->ibcddrctrl = ddr | val;
+ qib_write_kreg(ppd->dd, kr_ibcddrctrl,
+ ppd->cpspec->ibcddrctrl);
+ qib_write_kreg(ppd->dd, kr_scratch, 0);
+ }
+ return ret;
+}
+
+static void qib_update_7220_usrhead(struct qib_ctxtdata *rcd, u64 hd,
+ u32 updegr, u32 egrhd, u32 npkts)
+{
+ if (updegr)
+ qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
+ qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+}
+
+static u32 qib_7220_hdrqempty(struct qib_ctxtdata *rcd)
+{
+ u32 head, tail;
+
+ head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt);
+ if (rcd->rcvhdrtail_kvaddr)
+ tail = qib_get_rcvhdrtail(rcd);
+ else
+ tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt);
+ return head == tail;
+}
+
+/*
+ * Modify the RCVCTRL register in chip-specific way. This
+ * is a function because bit positions and (future) register
+ * location is chip-specifc, but the needed operations are
+ * generic. <op> is a bit-mask because we often want to
+ * do multiple modifications.
+ */
+static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op,
+ int ctxt)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 mask, val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
+ if (op & QIB_RCVCTRL_TAILUPD_ENB)
+ dd->rcvctrl |= (1ULL << IBA7220_R_TAILUPD_SHIFT);
+ if (op & QIB_RCVCTRL_TAILUPD_DIS)
+ dd->rcvctrl &= ~(1ULL << IBA7220_R_TAILUPD_SHIFT);
+ if (op & QIB_RCVCTRL_PKEY_ENB)
+ dd->rcvctrl &= ~(1ULL << IBA7220_R_PKEY_DIS_SHIFT);
+ if (op & QIB_RCVCTRL_PKEY_DIS)
+ dd->rcvctrl |= (1ULL << IBA7220_R_PKEY_DIS_SHIFT);
+ if (ctxt < 0)
+ mask = (1ULL << dd->ctxtcnt) - 1;
+ else
+ mask = (1ULL << ctxt);
+ if (op & QIB_RCVCTRL_CTXT_ENB) {
+ /* always done for specific ctxt */
+ dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, PortEnable));
+ if (!(dd->flags & QIB_NODMA_RTAIL))
+ dd->rcvctrl |= 1ULL << IBA7220_R_TAILUPD_SHIFT;
+ /* Write these registers before the context is enabled. */
+ qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt,
+ dd->rcd[ctxt]->rcvhdrqtailaddr_phys);
+ qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt,
+ dd->rcd[ctxt]->rcvhdrq_phys);
+ dd->rcd[ctxt]->seq_cnt = 1;
+ }
+ if (op & QIB_RCVCTRL_CTXT_DIS)
+ dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, PortEnable));
+ if (op & QIB_RCVCTRL_INTRAVAIL_ENB)
+ dd->rcvctrl |= (mask << IBA7220_R_INTRAVAIL_SHIFT);
+ if (op & QIB_RCVCTRL_INTRAVAIL_DIS)
+ dd->rcvctrl &= ~(mask << IBA7220_R_INTRAVAIL_SHIFT);
+ qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
+ if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rhdrhead_intr_off) {
+ /* arm rcv interrupt */
+ val = qib_read_ureg32(dd, ur_rcvhdrhead, ctxt) |
+ dd->rhdrhead_intr_off;
+ qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
+ }
+ if (op & QIB_RCVCTRL_CTXT_ENB) {
+ /*
+ * Init the context registers also; if we were
+ * disabled, tail and head should both be zero
+ * already from the enable, but since we don't
+ * know, we have to do it explicitly.
+ */
+ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
+ qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
+
+ val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt);
+ dd->rcd[ctxt]->head = val;
+ /* If kctxt, interrupt on next receive. */
+ if (ctxt < dd->first_user_ctxt)
+ val |= dd->rhdrhead_intr_off;
+ qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
+ }
+ if (op & QIB_RCVCTRL_CTXT_DIS) {
+ if (ctxt >= 0) {
+ qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, 0);
+ qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, 0);
+ } else {
+ unsigned i;
+
+ for (i = 0; i < dd->cfgctxts; i++) {
+ qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr,
+ i, 0);
+ qib_write_kreg_ctxt(dd, kr_rcvhdraddr, i, 0);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+}
+
+/*
+ * Modify the SENDCTRL register in chip-specific way. This
+ * is a function there may be multiple such registers with
+ * slightly different layouts. To start, we assume the
+ * "canonical" register layout of the first chips.
+ * Chip requires no back-back sendctrl writes, so write
+ * scratch register after writing sendctrl
+ */
+static void sendctrl_7220_mod(struct qib_pportdata *ppd, u32 op)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u64 tmp_dd_sendctrl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+
+ /* First the ones that are "sticky", saved in shadow */
+ if (op & QIB_SENDCTRL_CLEAR)
+ dd->sendctrl = 0;
+ if (op & QIB_SENDCTRL_SEND_DIS)
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, SPioEnable);
+ else if (op & QIB_SENDCTRL_SEND_ENB) {
+ dd->sendctrl |= SYM_MASK(SendCtrl, SPioEnable);
+ if (dd->flags & QIB_USE_SPCL_TRIG)
+ dd->sendctrl |= SYM_MASK(SendCtrl,
+ SSpecialTriggerEn);
+ }
+ if (op & QIB_SENDCTRL_AVAIL_DIS)
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
+ else if (op & QIB_SENDCTRL_AVAIL_ENB)
+ dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd);
+
+ if (op & QIB_SENDCTRL_DISARM_ALL) {
+ u32 i, last;
+
+ tmp_dd_sendctrl = dd->sendctrl;
+ /*
+ * disarm any that are not yet launched, disabling sends
+ * and updates until done.
+ */
+ last = dd->piobcnt2k + dd->piobcnt4k;
+ tmp_dd_sendctrl &=
+ ~(SYM_MASK(SendCtrl, SPioEnable) |
+ SYM_MASK(SendCtrl, SendBufAvailUpd));
+ for (i = 0; i < last; i++) {
+ qib_write_kreg(dd, kr_sendctrl,
+ tmp_dd_sendctrl |
+ SYM_MASK(SendCtrl, Disarm) | i);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+ }
+
+ tmp_dd_sendctrl = dd->sendctrl;
+
+ if (op & QIB_SENDCTRL_FLUSH)
+ tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Abort);
+ if (op & QIB_SENDCTRL_DISARM)
+ tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) |
+ ((op & QIB_7220_SendCtrl_DisarmPIOBuf_RMASK) <<
+ SYM_LSB(SendCtrl, DisarmPIOBuf));
+ if ((op & QIB_SENDCTRL_AVAIL_BLIP) &&
+ (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd)))
+ tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
+
+ qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+
+ if (op & QIB_SENDCTRL_AVAIL_BLIP) {
+ qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
+ qib_write_kreg(dd, kr_scratch, 0);
+ }
+
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+
+ if (op & QIB_SENDCTRL_FLUSH) {
+ u32 v;
+ /*
+ * ensure writes have hit chip, then do a few
+ * more reads, to allow DMA of pioavail registers
+ * to occur, so in-memory copy is in sync with
+ * the chip. Not always safe to sleep.
+ */
+ v = qib_read_kreg32(dd, kr_scratch);
+ qib_write_kreg(dd, kr_scratch, v);
+ v = qib_read_kreg32(dd, kr_scratch);
+ qib_write_kreg(dd, kr_scratch, v);
+ qib_read_kreg32(dd, kr_scratch);
+ }
+}
+
+/**
+ * qib_portcntr_7220 - read a per-port counter
+ * @ppd: the qlogic_ib device
+ * @reg: the counter to snapshot
+ */
+static u64 qib_portcntr_7220(struct qib_pportdata *ppd, u32 reg)
+{
+ u64 ret = 0ULL;
+ struct qib_devdata *dd = ppd->dd;
+ u16 creg;
+ /* 0xffff for unimplemented or synthesized counters */
+ static const u16 xlator[] = {
+ [QIBPORTCNTR_PKTSEND] = cr_pktsend,
+ [QIBPORTCNTR_WORDSEND] = cr_wordsend,
+ [QIBPORTCNTR_PSXMITDATA] = cr_psxmitdatacount,
+ [QIBPORTCNTR_PSXMITPKTS] = cr_psxmitpktscount,
+ [QIBPORTCNTR_PSXMITWAIT] = cr_psxmitwaitcount,
+ [QIBPORTCNTR_SENDSTALL] = cr_sendstall,
+ [QIBPORTCNTR_PKTRCV] = cr_pktrcv,
+ [QIBPORTCNTR_PSRCVDATA] = cr_psrcvdatacount,
+ [QIBPORTCNTR_PSRCVPKTS] = cr_psrcvpktscount,
+ [QIBPORTCNTR_RCVEBP] = cr_rcvebp,
+ [QIBPORTCNTR_RCVOVFL] = cr_rcvovfl,
+ [QIBPORTCNTR_WORDRCV] = cr_wordrcv,
+ [QIBPORTCNTR_RXDROPPKT] = cr_rxdroppkt,
+ [QIBPORTCNTR_RXLOCALPHYERR] = cr_rxotherlocalphyerr,
+ [QIBPORTCNTR_RXVLERR] = cr_rxvlerr,
+ [QIBPORTCNTR_ERRICRC] = cr_erricrc,
+ [QIBPORTCNTR_ERRVCRC] = cr_errvcrc,
+ [QIBPORTCNTR_ERRLPCRC] = cr_errlpcrc,
+ [QIBPORTCNTR_BADFORMAT] = cr_badformat,
+ [QIBPORTCNTR_ERR_RLEN] = cr_err_rlen,
+ [QIBPORTCNTR_IBSYMBOLERR] = cr_ibsymbolerr,
+ [QIBPORTCNTR_INVALIDRLEN] = cr_invalidrlen,
+ [QIBPORTCNTR_UNSUPVL] = cr_txunsupvl,
+ [QIBPORTCNTR_EXCESSBUFOVFL] = cr_excessbufferovfl,
+ [QIBPORTCNTR_ERRLINK] = cr_errlink,
+ [QIBPORTCNTR_IBLINKDOWN] = cr_iblinkdown,
+ [QIBPORTCNTR_IBLINKERRRECOV] = cr_iblinkerrrecov,
+ [QIBPORTCNTR_LLI] = cr_locallinkintegrityerr,
+ [QIBPORTCNTR_PSINTERVAL] = cr_psinterval,
+ [QIBPORTCNTR_PSSTART] = cr_psstart,
+ [QIBPORTCNTR_PSSTAT] = cr_psstat,
+ [QIBPORTCNTR_VL15PKTDROP] = cr_vl15droppedpkt,
+ [QIBPORTCNTR_ERRPKEY] = cr_errpkey,
+ [QIBPORTCNTR_KHDROVFL] = 0xffff,
+ };
+
+ if (reg >= ARRAY_SIZE(xlator)) {
+ qib_devinfo(ppd->dd->pcidev,
+ "Unimplemented portcounter %u\n", reg);
+ goto done;
+ }
+ creg = xlator[reg];
+
+ if (reg == QIBPORTCNTR_KHDROVFL) {
+ int i;
+
+ /* sum over all kernel contexts */
+ for (i = 0; i < dd->first_user_ctxt; i++)
+ ret += read_7220_creg32(dd, cr_portovfl + i);
+ }
+ if (creg == 0xffff)
+ goto done;
+
+ /*
+ * only fast incrementing counters are 64bit; use 32 bit reads to
+ * avoid two independent reads when on opteron
+ */
+ if ((creg == cr_wordsend || creg == cr_wordrcv ||
+ creg == cr_pktsend || creg == cr_pktrcv))
+ ret = read_7220_creg(dd, creg);
+ else
+ ret = read_7220_creg32(dd, creg);
+ if (creg == cr_ibsymbolerr) {
+ if (dd->pport->cpspec->ibdeltainprog)
+ ret -= ret - ppd->cpspec->ibsymsnap;
+ ret -= dd->pport->cpspec->ibsymdelta;
+ } else if (creg == cr_iblinkerrrecov) {
+ if (dd->pport->cpspec->ibdeltainprog)
+ ret -= ret - ppd->cpspec->iblnkerrsnap;
+ ret -= dd->pport->cpspec->iblnkerrdelta;
+ }
+done:
+ return ret;
+}
+
+/*
+ * Device counter names (not port-specific), one line per stat,
+ * single string. Used by utilities like ipathstats to print the stats
+ * in a way which works for different versions of drivers, without changing
+ * the utility. Names need to be 12 chars or less (w/o newline), for proper
+ * display by utility.
+ * Non-error counters are first.
+ * Start of "error" counters is indicated by a leading "E " on the first
+ * "error" counter, and doesn't count in label length.
+ * The EgrOvfl list needs to be last so we truncate them at the configured
+ * context count for the device.
+ * cntr7220indices contains the corresponding register indices.
+ */
+static const char cntr7220names[] =
+ "Interrupts\n"
+ "HostBusStall\n"
+ "E RxTIDFull\n"
+ "RxTIDInvalid\n"
+ "Ctxt0EgrOvfl\n"
+ "Ctxt1EgrOvfl\n"
+ "Ctxt2EgrOvfl\n"
+ "Ctxt3EgrOvfl\n"
+ "Ctxt4EgrOvfl\n"
+ "Ctxt5EgrOvfl\n"
+ "Ctxt6EgrOvfl\n"
+ "Ctxt7EgrOvfl\n"
+ "Ctxt8EgrOvfl\n"
+ "Ctxt9EgrOvfl\n"
+ "Ctx10EgrOvfl\n"
+ "Ctx11EgrOvfl\n"
+ "Ctx12EgrOvfl\n"
+ "Ctx13EgrOvfl\n"
+ "Ctx14EgrOvfl\n"
+ "Ctx15EgrOvfl\n"
+ "Ctx16EgrOvfl\n";
+
+static const size_t cntr7220indices[] = {
+ cr_lbint,
+ cr_lbflowstall,
+ cr_errtidfull,
+ cr_errtidvalid,
+ cr_portovfl + 0,
+ cr_portovfl + 1,
+ cr_portovfl + 2,
+ cr_portovfl + 3,
+ cr_portovfl + 4,
+ cr_portovfl + 5,
+ cr_portovfl + 6,
+ cr_portovfl + 7,
+ cr_portovfl + 8,
+ cr_portovfl + 9,
+ cr_portovfl + 10,
+ cr_portovfl + 11,
+ cr_portovfl + 12,
+ cr_portovfl + 13,
+ cr_portovfl + 14,
+ cr_portovfl + 15,
+ cr_portovfl + 16,
+};
+
+/*
+ * same as cntr7220names and cntr7220indices, but for port-specific counters.
+ * portcntr7220indices is somewhat complicated by some registers needing
+ * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG
+ */
+static const char portcntr7220names[] =
+ "TxPkt\n"
+ "TxFlowPkt\n"
+ "TxWords\n"
+ "RxPkt\n"
+ "RxFlowPkt\n"
+ "RxWords\n"
+ "TxFlowStall\n"
+ "TxDmaDesc\n" /* 7220 and 7322-only */
+ "E RxDlidFltr\n" /* 7220 and 7322-only */
+ "IBStatusChng\n"
+ "IBLinkDown\n"
+ "IBLnkRecov\n"
+ "IBRxLinkErr\n"
+ "IBSymbolErr\n"
+ "RxLLIErr\n"
+ "RxBadFormat\n"
+ "RxBadLen\n"
+ "RxBufOvrfl\n"
+ "RxEBP\n"
+ "RxFlowCtlErr\n"
+ "RxICRCerr\n"
+ "RxLPCRCerr\n"
+ "RxVCRCerr\n"
+ "RxInvalLen\n"
+ "RxInvalPKey\n"
+ "RxPktDropped\n"
+ "TxBadLength\n"
+ "TxDropped\n"
+ "TxInvalLen\n"
+ "TxUnderrun\n"
+ "TxUnsupVL\n"
+ "RxLclPhyErr\n" /* 7220 and 7322-only */
+ "RxVL15Drop\n" /* 7220 and 7322-only */
+ "RxVlErr\n" /* 7220 and 7322-only */
+ "XcessBufOvfl\n" /* 7220 and 7322-only */
+ ;
+
+#define _PORT_VIRT_FLAG 0x8000 /* "virtual", need adjustments */
+static const size_t portcntr7220indices[] = {
+ QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG,
+ cr_pktsendflow,
+ QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG,
+ cr_pktrcvflowctrl,
+ QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG,
+ cr_txsdmadesc,
+ cr_rxdlidfltr,
+ cr_ibstatuschange,
+ QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_LLI | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG,
+ cr_rcvflowctrl_err,
+ QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG,
+ cr_invalidslen,
+ cr_senddropped,
+ cr_errslen,
+ cr_sendunderrun,
+ cr_txunsupvl,
+ QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG,
+ QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG,
+};
+
+/* do all the setup to make the counter reads efficient later */
+static void init_7220_cntrnames(struct qib_devdata *dd)
+{
+ int i, j = 0;
+ char *s;
+
+ for (i = 0, s = (char *)cntr7220names; s && j <= dd->cfgctxts;
+ i++) {
+ /* we always have at least one counter before the egrovfl */
+ if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12))
+ j = 1;
+ s = strchr(s + 1, '\n');
+ if (s && j)
+ j++;
+ }
+ dd->cspec->ncntrs = i;
+ if (!s)
+ /* full list; size is without terminating null */
+ dd->cspec->cntrnamelen = sizeof(cntr7220names) - 1;
+ else
+ dd->cspec->cntrnamelen = 1 + s - cntr7220names;
+ dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64),
+ GFP_KERNEL);
+
+ for (i = 0, s = (char *)portcntr7220names; s; i++)
+ s = strchr(s + 1, '\n');
+ dd->cspec->nportcntrs = i - 1;
+ dd->cspec->portcntrnamelen = sizeof(portcntr7220names) - 1;
+ dd->cspec->portcntrs = kmalloc_array(dd->cspec->nportcntrs,
+ sizeof(u64),
+ GFP_KERNEL);
+}
+
+static u32 qib_read_7220cntrs(struct qib_devdata *dd, loff_t pos, char **namep,
+ u64 **cntrp)
+{
+ u32 ret;
+
+ if (!dd->cspec->cntrs) {
+ ret = 0;
+ goto done;
+ }
+
+ if (namep) {
+ *namep = (char *)cntr7220names;
+ ret = dd->cspec->cntrnamelen;
+ if (pos >= ret)
+ ret = 0; /* final read after getting everything */
+ } else {
+ u64 *cntr = dd->cspec->cntrs;
+ int i;
+
+ ret = dd->cspec->ncntrs * sizeof(u64);
+ if (!cntr || pos >= ret) {
+ /* everything read, or couldn't get memory */
+ ret = 0;
+ goto done;
+ }
+
+ *cntrp = cntr;
+ for (i = 0; i < dd->cspec->ncntrs; i++)
+ *cntr++ = read_7220_creg32(dd, cntr7220indices[i]);
+ }
+done:
+ return ret;
+}
+
+static u32 qib_read_7220portcntrs(struct qib_devdata *dd, loff_t pos, u32 port,
+ char **namep, u64 **cntrp)
+{
+ u32 ret;
+
+ if (!dd->cspec->portcntrs) {
+ ret = 0;
+ goto done;
+ }
+ if (namep) {
+ *namep = (char *)portcntr7220names;
+ ret = dd->cspec->portcntrnamelen;
+ if (pos >= ret)
+ ret = 0; /* final read after getting everything */
+ } else {
+ u64 *cntr = dd->cspec->portcntrs;
+ struct qib_pportdata *ppd = &dd->pport[port];
+ int i;
+
+ ret = dd->cspec->nportcntrs * sizeof(u64);
+ if (!cntr || pos >= ret) {
+ /* everything read, or couldn't get memory */
+ ret = 0;
+ goto done;
+ }
+ *cntrp = cntr;
+ for (i = 0; i < dd->cspec->nportcntrs; i++) {
+ if (portcntr7220indices[i] & _PORT_VIRT_FLAG)
+ *cntr++ = qib_portcntr_7220(ppd,
+ portcntr7220indices[i] &
+ ~_PORT_VIRT_FLAG);
+ else
+ *cntr++ = read_7220_creg32(dd,
+ portcntr7220indices[i]);
+ }
+ }
+done:
+ return ret;
+}
+
+/**
+ * qib_get_7220_faststats - get word counters from chip before they overflow
+ * @t: contains a pointer to the qlogic_ib device qib_devdata
+ *
+ * This needs more work; in particular, decision on whether we really
+ * need traffic_wds done the way it is
+ * called from add_timer
+ */
+static void qib_get_7220_faststats(struct timer_list *t)
+{
+ struct qib_devdata *dd = from_timer(dd, t, stats_timer);
+ struct qib_pportdata *ppd = dd->pport;
+ unsigned long flags;
+ u64 traffic_wds;
+
+ /*
+ * don't access the chip while running diags, or memory diags can
+ * fail
+ */
+ if (!(dd->flags & QIB_INITTED) || dd->diag_client)
+ /* but re-arm the timer, for diags case; won't hurt other */
+ goto done;
+
+ /*
+ * We now try to maintain an activity timer, based on traffic
+ * exceeding a threshold, so we need to check the word-counts
+ * even if they are 64-bit.
+ */
+ traffic_wds = qib_portcntr_7220(ppd, cr_wordsend) +
+ qib_portcntr_7220(ppd, cr_wordrcv);
+ spin_lock_irqsave(&dd->eep_st_lock, flags);
+ traffic_wds -= dd->traffic_wds;
+ dd->traffic_wds += traffic_wds;
+ spin_unlock_irqrestore(&dd->eep_st_lock, flags);
+done:
+ mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
+}
+
+/*
+ * If we are using MSI, try to fallback to INTx.
+ */
+static int qib_7220_intr_fallback(struct qib_devdata *dd)
+{
+ if (!dd->msi_lo)
+ return 0;
+
+ qib_devinfo(dd->pcidev,
+ "MSI interrupt not detected, trying INTx interrupts\n");
+
+ qib_free_irq(dd);
+ dd->msi_lo = 0;
+ if (pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_LEGACY) < 0)
+ qib_dev_err(dd, "Failed to enable INTx\n");
+ qib_setup_7220_interrupt(dd);
+ return 1;
+}
+
+/*
+ * Reset the XGXS (between serdes and IBC). Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining. To do this right, we reset IBC
+ * as well.
+ */
+static void qib_7220_xgxs_reset(struct qib_pportdata *ppd)
+{
+ u64 val, prev_val;
+ struct qib_devdata *dd = ppd->dd;
+
+ prev_val = qib_read_kreg64(dd, kr_xgxs_cfg);
+ val = prev_val | QLOGIC_IB_XGXS_RESET;
+ prev_val &= ~QLOGIC_IB_XGXS_RESET; /* be sure */
+ qib_write_kreg(dd, kr_control,
+ dd->control & ~QLOGIC_IB_C_LINKENABLE);
+ qib_write_kreg(dd, kr_xgxs_cfg, val);
+ qib_read_kreg32(dd, kr_scratch);
+ qib_write_kreg(dd, kr_xgxs_cfg, prev_val);
+ qib_write_kreg(dd, kr_control, dd->control);
+}
+
+/*
+ * For this chip, we want to use the same buffer every time
+ * when we are trying to bring the link up (they are always VL15
+ * packets). At that link state the packet should always go out immediately
+ * (or at least be discarded at the tx interface if the link is down).
+ * If it doesn't, and the buffer isn't available, that means some other
+ * sender has gotten ahead of us, and is preventing our packet from going
+ * out. In that case, we flush all packets, and try again. If that still
+ * fails, we fail the request, and hope things work the next time around.
+ *
+ * We don't need very complicated heuristics on whether the packet had
+ * time to go out or not, since even at SDR 1X, it goes out in very short
+ * time periods, covered by the chip reads done here and as part of the
+ * flush.
+ */
+static u32 __iomem *get_7220_link_buf(struct qib_pportdata *ppd, u32 *bnum)
+{
+ u32 __iomem *buf;
+ u32 lbuf = ppd->dd->cspec->lastbuf_for_pio;
+ int do_cleanup;
+ unsigned long flags;
+
+ /*
+ * always blip to get avail list updated, since it's almost
+ * always needed, and is fairly cheap.
+ */
+ sendctrl_7220_mod(ppd->dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+ qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
+ buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
+ if (buf)
+ goto done;
+
+ spin_lock_irqsave(&ppd->sdma_lock, flags);
+ if (ppd->sdma_state.current_state == qib_sdma_state_s20_idle &&
+ ppd->sdma_state.current_state != qib_sdma_state_s00_hw_down) {
+ __qib_sdma_process_event(ppd, qib_sdma_event_e00_go_hw_down);
+ do_cleanup = 0;
+ } else {
+ do_cleanup = 1;
+ qib_7220_sdma_hw_clean_up(ppd);
+ }
+ spin_unlock_irqrestore(&ppd->sdma_lock, flags);
+
+ if (do_cleanup) {
+ qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
+ buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
+ }
+done:
+ return buf;
+}
+
+/*
+ * This code for non-IBTA-compliant IB speed negotiation is only known to
+ * work for the SDR to DDR transition, and only between an HCA and a switch
+ * with recent firmware. It is based on observed heuristics, rather than
+ * actual knowledge of the non-compliant speed negotiation.
+ * It has a number of hard-coded fields, since the hope is to rewrite this
+ * when a spec is available on how the negoation is intended to work.
+ */
+static void autoneg_7220_sendpkt(struct qib_pportdata *ppd, u32 *hdr,
+ u32 dcnt, u32 *data)
+{
+ int i;
+ u64 pbc;
+ u32 __iomem *piobuf;
+ u32 pnum;
+ struct qib_devdata *dd = ppd->dd;
+
+ i = 0;
+ pbc = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */
+ pbc |= PBC_7220_VL15_SEND;
+ while (!(piobuf = get_7220_link_buf(ppd, &pnum))) {
+ if (i++ > 5)
+ return;
+ udelay(2);
+ }
+ sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_DISARM_BUF(pnum));
+ writeq(pbc, piobuf);
+ qib_flush_wc();
+ qib_pio_copy(piobuf + 2, hdr, 7);
+ qib_pio_copy(piobuf + 9, data, dcnt);
+ if (dd->flags & QIB_USE_SPCL_TRIG) {
+ u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023;
+
+ qib_flush_wc();
+ __raw_writel(0xaebecede, piobuf + spcl_off);
+ }
+ qib_flush_wc();
+ qib_sendbuf_done(dd, pnum);
+}
+
+/*
+ * _start packet gets sent twice at start, _done gets sent twice at end
+ */
+static void autoneg_7220_send(struct qib_pportdata *ppd, int which)
+{
+ struct qib_devdata *dd = ppd->dd;
+ static u32 swapped;
+ u32 dw, i, hcnt, dcnt, *data;
+ static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba };
+ static u32 madpayload_start[0x40] = {
+ 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
+ 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+ 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */
+ };
+ static u32 madpayload_done[0x40] = {
+ 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
+ 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+ 0x40000001, 0x1388, 0x15e, /* rest 0's */
+ };
+
+ dcnt = ARRAY_SIZE(madpayload_start);
+ hcnt = ARRAY_SIZE(hdr);
+ if (!swapped) {
+ /* for maintainability, do it at runtime */
+ for (i = 0; i < hcnt; i++) {
+ dw = (__force u32) cpu_to_be32(hdr[i]);
+ hdr[i] = dw;
+ }
+ for (i = 0; i < dcnt; i++) {
+ dw = (__force u32) cpu_to_be32(madpayload_start[i]);
+ madpayload_start[i] = dw;
+ dw = (__force u32) cpu_to_be32(madpayload_done[i]);
+ madpayload_done[i] = dw;
+ }
+ swapped = 1;
+ }
+
+ data = which ? madpayload_done : madpayload_start;
+
+ autoneg_7220_sendpkt(ppd, hdr, dcnt, data);
+ qib_read_kreg64(dd, kr_scratch);
+ udelay(2);
+ autoneg_7220_sendpkt(ppd, hdr, dcnt, data);
+ qib_read_kreg64(dd, kr_scratch);
+ udelay(2);
+}
+
+/*
+ * Do the absolute minimum to cause an IB speed change, and make it
+ * ready, but don't actually trigger the change. The caller will
+ * do that when ready (if link is in Polling training state, it will
+ * happen immediately, otherwise when link next goes down)
+ *
+ * This routine should only be used as part of the DDR autonegotation
+ * code for devices that are not compliant with IB 1.2 (or code that
+ * fixes things up for same).
+ *
+ * When link has gone down, and autoneg enabled, or autoneg has
+ * failed and we give up until next time we set both speeds, and
+ * then we want IBTA enabled as well as "use max enabled speed.
+ */
+static void set_7220_ibspeed_fast(struct qib_pportdata *ppd, u32 speed)
+{
+ ppd->cpspec->ibcddrctrl &= ~(IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK);
+
+ if (speed == (QIB_IB_SDR | QIB_IB_DDR))
+ ppd->cpspec->ibcddrctrl |= IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ else
+ ppd->cpspec->ibcddrctrl |= speed == QIB_IB_DDR ?
+ IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
+
+ qib_write_kreg(ppd->dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl);
+ qib_write_kreg(ppd->dd, kr_scratch, 0);
+}
+
+/*
+ * This routine is only used when we are not talking to another
+ * IB 1.2-compliant device that we think can do DDR.
+ * (This includes all existing switch chips as of Oct 2007.)
+ * 1.2-compliant devices go directly to DDR prior to reaching INIT
+ */
+static void try_7220_autoneg(struct qib_pportdata *ppd)
+{
+ unsigned long flags;
+
+ /*
+ * Required for older non-IB1.2 DDR switches. Newer
+ * non-IB-compliant switches don't need it, but so far,
+ * aren't bothered by it either. "Magic constant"
+ */
+ qib_write_kreg(ppd->dd, kr_ncmodectrl, 0x3b9dc07);
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags |= QIBL_IB_AUTONEG_INPROG;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ autoneg_7220_send(ppd, 0);
+ set_7220_ibspeed_fast(ppd, QIB_IB_DDR);
+
+ toggle_7220_rclkrls(ppd->dd);
+ /* 2 msec is minimum length of a poll cycle */
+ queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work,
+ msecs_to_jiffies(2));
+}
+
+/*
+ * Handle the empirically determined mechanism for auto-negotiation
+ * of DDR speed with switches.
+ */
+static void autoneg_7220_work(struct work_struct *work)
+{
+ struct qib_pportdata *ppd;
+ struct qib_devdata *dd;
+ u32 i;
+ unsigned long flags;
+
+ ppd = &container_of(work, struct qib_chippport_specific,
+ autoneg_work.work)->pportdata;
+ dd = ppd->dd;
+
+ /*
+ * Busy wait for this first part, it should be at most a
+ * few hundred usec, since we scheduled ourselves for 2msec.
+ */
+ for (i = 0; i < 25; i++) {
+ if (SYM_FIELD(ppd->lastibcstat, IBCStatus, LinkTrainingState)
+ == IB_7220_LT_STATE_POLLQUIET) {
+ qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE);
+ break;
+ }
+ udelay(100);
+ }
+
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
+ goto done; /* we got there early or told to stop */
+
+ /* we expect this to timeout */
+ if (wait_event_timeout(ppd->cpspec->autoneg_wait,
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(90)))
+ goto done;
+
+ toggle_7220_rclkrls(dd);
+
+ /* we expect this to timeout */
+ if (wait_event_timeout(ppd->cpspec->autoneg_wait,
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(1700)))
+ goto done;
+
+ set_7220_ibspeed_fast(ppd, QIB_IB_SDR);
+ toggle_7220_rclkrls(dd);
+
+ /*
+ * Wait up to 250 msec for link to train and get to INIT at DDR;
+ * this should terminate early.
+ */
+ wait_event_timeout(ppd->cpspec->autoneg_wait,
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(250));
+done:
+ if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) {
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
+ if (dd->cspec->autoneg_tries == AUTONEG_TRIES) {
+ ppd->lflags |= QIBL_IB_AUTONEG_FAILED;
+ dd->cspec->autoneg_tries = 0;
+ }
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+ set_7220_ibspeed_fast(ppd, ppd->link_speed_enabled);
+ }
+}
+
+static u32 qib_7220_iblink_state(u64 ibcs)
+{
+ u32 state = (u32)SYM_FIELD(ibcs, IBCStatus, LinkState);
+
+ switch (state) {
+ case IB_7220_L_STATE_INIT:
+ state = IB_PORT_INIT;
+ break;
+ case IB_7220_L_STATE_ARM:
+ state = IB_PORT_ARMED;
+ break;
+ case IB_7220_L_STATE_ACTIVE:
+ case IB_7220_L_STATE_ACT_DEFER:
+ state = IB_PORT_ACTIVE;
+ break;
+ default:
+ fallthrough;
+ case IB_7220_L_STATE_DOWN:
+ state = IB_PORT_DOWN;
+ break;
+ }
+ return state;
+}
+
+/* returns the IBTA port state, rather than the IBC link training state */
+static u8 qib_7220_phys_portstate(u64 ibcs)
+{
+ u8 state = (u8)SYM_FIELD(ibcs, IBCStatus, LinkTrainingState);
+ return qib_7220_physportstate[state];
+}
+
+static int qib_7220_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
+{
+ int ret = 0, symadj = 0;
+ struct qib_devdata *dd = ppd->dd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY;
+ spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+
+ if (!ibup) {
+ /*
+ * When the link goes down we don't want AEQ running, so it
+ * won't interfere with IBC training, etc., and we need
+ * to go back to the static SerDes preset values.
+ */
+ if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
+ QIBL_IB_AUTONEG_INPROG)))
+ set_7220_ibspeed_fast(ppd, ppd->link_speed_enabled);
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ qib_sd7220_presets(dd);
+ qib_cancel_sends(ppd); /* initial disarm, etc. */
+ spin_lock_irqsave(&ppd->sdma_lock, flags);
+ if (__qib_sdma_running(ppd))
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e70_go_idle);
+ spin_unlock_irqrestore(&ppd->sdma_lock, flags);
+ }
+ /* this might better in qib_sd7220_presets() */
+ set_7220_relock_poll(dd, ibup);
+ } else {
+ if (qib_compat_ddr_negotiate &&
+ !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
+ QIBL_IB_AUTONEG_INPROG)) &&
+ ppd->link_speed_active == QIB_IB_SDR &&
+ (ppd->link_speed_enabled & (QIB_IB_DDR | QIB_IB_SDR)) ==
+ (QIB_IB_DDR | QIB_IB_SDR) &&
+ dd->cspec->autoneg_tries < AUTONEG_TRIES) {
+ /* we are SDR, and DDR auto-negotiation enabled */
+ ++dd->cspec->autoneg_tries;
+ if (!ppd->cpspec->ibdeltainprog) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymsnap = read_7220_creg32(dd,
+ cr_ibsymbolerr);
+ ppd->cpspec->iblnkerrsnap = read_7220_creg32(dd,
+ cr_iblinkerrrecov);
+ }
+ try_7220_autoneg(ppd);
+ ret = 1; /* no other IB status change processing */
+ } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
+ ppd->link_speed_active == QIB_IB_SDR) {
+ autoneg_7220_send(ppd, 1);
+ set_7220_ibspeed_fast(ppd, QIB_IB_DDR);
+ udelay(2);
+ toggle_7220_rclkrls(dd);
+ ret = 1; /* no other IB status change processing */
+ } else {
+ if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
+ (ppd->link_speed_active & QIB_IB_DDR)) {
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG |
+ QIBL_IB_AUTONEG_FAILED);
+ spin_unlock_irqrestore(&ppd->lflags_lock,
+ flags);
+ dd->cspec->autoneg_tries = 0;
+ /* re-enable SDR, for next link down */
+ set_7220_ibspeed_fast(ppd,
+ ppd->link_speed_enabled);
+ wake_up(&ppd->cpspec->autoneg_wait);
+ symadj = 1;
+ } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) {
+ /*
+ * Clear autoneg failure flag, and do setup
+ * so we'll try next time link goes down and
+ * back to INIT (possibly connected to a
+ * different device).
+ */
+ spin_lock_irqsave(&ppd->lflags_lock, flags);
+ ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
+ spin_unlock_irqrestore(&ppd->lflags_lock,
+ flags);
+ ppd->cpspec->ibcddrctrl |=
+ IBA7220_IBC_IBTA_1_2_MASK;
+ qib_write_kreg(dd, kr_ncmodectrl, 0);
+ symadj = 1;
+ }
+ }
+
+ if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
+ symadj = 1;
+
+ if (!ret) {
+ ppd->delay_mult = rate_to_delay
+ [(ibcs >> IBA7220_LINKSPEED_SHIFT) & 1]
+ [(ibcs >> IBA7220_LINKWIDTH_SHIFT) & 1];
+
+ set_7220_relock_poll(dd, ibup);
+ spin_lock_irqsave(&ppd->sdma_lock, flags);
+ /*
+ * Unlike 7322, the 7220 needs this, due to lack of
+ * interrupt in some cases when we have sdma active
+ * when the link goes down.
+ */
+ if (ppd->sdma_state.current_state !=
+ qib_sdma_state_s20_idle)
+ __qib_sdma_process_event(ppd,
+ qib_sdma_event_e00_go_hw_down);
+ spin_unlock_irqrestore(&ppd->sdma_lock, flags);
+ }
+ }
+
+ if (symadj) {
+ if (ppd->cpspec->ibdeltainprog) {
+ ppd->cpspec->ibdeltainprog = 0;
+ ppd->cpspec->ibsymdelta += read_7220_creg32(ppd->dd,
+ cr_ibsymbolerr) - ppd->cpspec->ibsymsnap;
+ ppd->cpspec->iblnkerrdelta += read_7220_creg32(ppd->dd,
+ cr_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap;
+ }
+ } else if (!ibup && qib_compat_ddr_negotiate &&
+ !ppd->cpspec->ibdeltainprog &&
+ !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ ppd->cpspec->ibdeltainprog = 1;
+ ppd->cpspec->ibsymsnap = read_7220_creg32(ppd->dd,
+ cr_ibsymbolerr);
+ ppd->cpspec->iblnkerrsnap = read_7220_creg32(ppd->dd,
+ cr_iblinkerrrecov);
+ }
+
+ if (!ret)
+ qib_setup_7220_setextled(ppd, ibup);
+ return ret;
+}
+
+/*
+ * Does read/modify/write to appropriate registers to
+ * set output and direction bits selected by mask.
+ * these are in their canonical positions (e.g. lsb of
+ * dir will end up in D48 of extctrl on existing chips).
+ * returns contents of GP Inputs.
+ */
+static int gpio_7220_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask)
+{
+ u64 read_val, new_out;
+ unsigned long flags;
+
+ if (mask) {
+ /* some bits being written, lock access to GPIO */
+ dir &= mask;
+ out &= mask;
+ spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+ dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe));
+ dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe));
+ new_out = (dd->cspec->gpio_out & ~mask) | out;
+
+ qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
+ qib_write_kreg(dd, kr_gpio_out, new_out);
+ dd->cspec->gpio_out = new_out;
+ spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+ }
+ /*
+ * It is unlikely that a read at this time would get valid
+ * data on a pin whose direction line was set in the same
+ * call to this function. We include the read here because
+ * that allows us to potentially combine a change on one pin with
+ * a read on another, and because the old code did something like
+ * this.
+ */
+ read_val = qib_read_kreg64(dd, kr_extstatus);
+ return SYM_FIELD(read_val, EXTStatus, GPIOIn);
+}
+
+/*
+ * Read fundamental info we need to use the chip. These are
+ * the registers that describe chip capabilities, and are
+ * saved in shadow registers.
+ */
+static void get_7220_chip_params(struct qib_devdata *dd)
+{
+ u64 val;
+ u32 piobufs;
+ int mtu;
+
+ dd->uregbase = qib_read_kreg32(dd, kr_userregbase);
+
+ dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt);
+ dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase);
+ dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase);
+ dd->palign = qib_read_kreg32(dd, kr_palign);
+ dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase);
+ dd->pio2k_bufbase = dd->piobufbase & 0xffffffff;
+
+ val = qib_read_kreg64(dd, kr_sendpiosize);
+ dd->piosize2k = val & ~0U;
+ dd->piosize4k = val >> 32;
+
+ mtu = ib_mtu_enum_to_int(qib_ibmtu);
+ if (mtu == -1)
+ mtu = QIB_DEFAULT_MTU;
+ dd->pport->ibmtu = (u32)mtu;
+
+ val = qib_read_kreg64(dd, kr_sendpiobufcnt);
+ dd->piobcnt2k = val & ~0U;
+ dd->piobcnt4k = val >> 32;
+ /* these may be adjusted in init_chip_wc_pat() */
+ dd->pio2kbase = (u32 __iomem *)
+ ((char __iomem *) dd->kregbase + dd->pio2k_bufbase);
+ if (dd->piobcnt4k) {
+ dd->pio4kbase = (u32 __iomem *)
+ ((char __iomem *) dd->kregbase +
+ (dd->piobufbase >> 32));
+ /*
+ * 4K buffers take 2 pages; we use roundup just to be
+ * paranoid; we calculate it once here, rather than on
+ * ever buf allocate
+ */
+ dd->align4k = ALIGN(dd->piosize4k, dd->palign);
+ }
+
+ piobufs = dd->piobcnt4k + dd->piobcnt2k;
+
+ dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) /
+ (sizeof(u64) * BITS_PER_BYTE / 2);
+}
+
+/*
+ * The chip base addresses in cspec and cpspec have to be set
+ * after possible init_chip_wc_pat(), rather than in
+ * qib_get_7220_chip_params(), so split out as separate function
+ */
+static void set_7220_baseaddrs(struct qib_devdata *dd)
+{
+ u32 cregbase;
+ /* init after possible re-map in init_chip_wc_pat() */
+ cregbase = qib_read_kreg32(dd, kr_counterregbase);
+ dd->cspec->cregbase = (u64 __iomem *)
+ ((char __iomem *) dd->kregbase + cregbase);
+
+ dd->egrtidbase = (u64 __iomem *)
+ ((char __iomem *) dd->kregbase + dd->rcvegrbase);
+}
+
+
+#define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl, SendIntBufAvail) | \
+ SYM_MASK(SendCtrl, SPioEnable) | \
+ SYM_MASK(SendCtrl, SSpecialTriggerEn) | \
+ SYM_MASK(SendCtrl, SendBufAvailUpd) | \
+ SYM_MASK(SendCtrl, AvailUpdThld) | \
+ SYM_MASK(SendCtrl, SDmaEnable) | \
+ SYM_MASK(SendCtrl, SDmaIntEnable) | \
+ SYM_MASK(SendCtrl, SDmaHalt) | \
+ SYM_MASK(SendCtrl, SDmaSingleDescriptor))
+
+static int sendctrl_hook(struct qib_devdata *dd,
+ const struct diag_observer *op,
+ u32 offs, u64 *data, u64 mask, int only_32)
+{
+ unsigned long flags;
+ unsigned idx = offs / sizeof(u64);
+ u64 local_data, all_bits;
+
+ if (idx != kr_sendctrl) {
+ qib_dev_err(dd, "SendCtrl Hook called with offs %X, %s-bit\n",
+ offs, only_32 ? "32" : "64");
+ return 0;
+ }
+
+ all_bits = ~0ULL;
+ if (only_32)
+ all_bits >>= 32;
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ if ((mask & all_bits) != all_bits) {
+ /*
+ * At least some mask bits are zero, so we need
+ * to read. The judgement call is whether from
+ * reg or shadow. First-cut: read reg, and complain
+ * if any bits which should be shadowed are different
+ * from their shadowed value.
+ */
+ if (only_32)
+ local_data = (u64)qib_read_kreg32(dd, idx);
+ else
+ local_data = qib_read_kreg64(dd, idx);
+ qib_dev_err(dd, "Sendctrl -> %X, Shad -> %X\n",
+ (u32)local_data, (u32)dd->sendctrl);
+ if ((local_data & SENDCTRL_SHADOWED) !=
+ (dd->sendctrl & SENDCTRL_SHADOWED))
+ qib_dev_err(dd, "Sendctrl read: %X shadow is %X\n",
+ (u32)local_data, (u32) dd->sendctrl);
+ *data = (local_data & ~mask) | (*data & mask);
+ }
+ if (mask) {
+ /*
+ * At least some mask bits are one, so we need
+ * to write, but only shadow some bits.
+ */
+ u64 sval, tval; /* Shadowed, transient */
+
+ /*
+ * New shadow val is bits we don't want to touch,
+ * ORed with bits we do, that are intended for shadow.
+ */
+ sval = (dd->sendctrl & ~mask);
+ sval |= *data & SENDCTRL_SHADOWED & mask;
+ dd->sendctrl = sval;
+ tval = sval | (*data & ~SENDCTRL_SHADOWED & mask);
+ qib_dev_err(dd, "Sendctrl <- %X, Shad <- %X\n",
+ (u32)tval, (u32)sval);
+ qib_write_kreg(dd, kr_sendctrl, tval);
+ qib_write_kreg(dd, kr_scratch, 0Ull);
+ }
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+
+ return only_32 ? 4 : 8;
+}
+
+static const struct diag_observer sendctrl_observer = {
+ sendctrl_hook, kr_sendctrl * sizeof(u64),
+ kr_sendctrl * sizeof(u64)
+};
+
+/*
+ * write the final few registers that depend on some of the
+ * init setup. Done late in init, just before bringing up
+ * the serdes.
+ */
+static int qib_late_7220_initreg(struct qib_devdata *dd)
+{
+ int ret = 0;
+ u64 val;
+
+ qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize);
+ qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize);
+ qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt);
+ qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
+ val = qib_read_kreg64(dd, kr_sendpioavailaddr);
+ if (val != dd->pioavailregs_phys) {
+ qib_dev_err(dd,
+ "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
+ (unsigned long) dd->pioavailregs_phys,
+ (unsigned long long) val);
+ ret = -EINVAL;
+ }
+ qib_register_observer(dd, &sendctrl_observer);
+ return ret;
+}
+
+static int qib_init_7220_variables(struct qib_devdata *dd)
+{
+ struct qib_chippport_specific *cpspec;
+ struct qib_pportdata *ppd;
+ int ret = 0;
+ u32 sbufs, updthresh;
+
+ cpspec = (struct qib_chippport_specific *)(dd + 1);
+ ppd = &cpspec->pportdata;
+ dd->pport = ppd;
+ dd->num_pports = 1;
+
+ dd->cspec = (struct qib_chip_specific *)(cpspec + dd->num_pports);
+ dd->cspec->dd = dd;
+ ppd->cpspec = cpspec;
+
+ spin_lock_init(&dd->cspec->sdepb_lock);
+ spin_lock_init(&dd->cspec->rcvmod_lock);
+ spin_lock_init(&dd->cspec->gpio_lock);
+
+ /* we haven't yet set QIB_PRESENT, so use read directly */
+ dd->revision = readq(&dd->kregbase[kr_revision]);
+
+ if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
+ qib_dev_err(dd,
+ "Revision register read failure, giving up initialization\n");
+ ret = -ENODEV;
+ goto bail;
+ }
+ dd->flags |= QIB_PRESENT; /* now register routines work */
+
+ dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R,
+ ChipRevMajor);
+ dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R,
+ ChipRevMinor);
+
+ get_7220_chip_params(dd);
+ qib_7220_boardname(dd);
+
+ /*
+ * GPIO bits for TWSI data and clock,
+ * used for serial EEPROM.
+ */
+ dd->gpio_sda_num = _QIB_GPIO_SDA_NUM;
+ dd->gpio_scl_num = _QIB_GPIO_SCL_NUM;
+ dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV;
+
+ dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY |
+ QIB_NODMA_RTAIL | QIB_HAS_THRESH_UPDATE;
+ dd->flags |= qib_special_trigger ?
+ QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA;
+
+ init_waitqueue_head(&cpspec->autoneg_wait);
+ INIT_DELAYED_WORK(&cpspec->autoneg_work, autoneg_7220_work);
+
+ ret = qib_init_pportdata(ppd, dd, 0, 1);
+ if (ret)
+ goto bail;
+ ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+ ppd->link_speed_supported = QIB_IB_SDR | QIB_IB_DDR;
+
+ ppd->link_width_enabled = ppd->link_width_supported;
+ ppd->link_speed_enabled = ppd->link_speed_supported;
+ /*
+ * Set the initial values to reasonable default, will be set
+ * for real when link is up.
+ */
+ ppd->link_width_active = IB_WIDTH_4X;
+ ppd->link_speed_active = QIB_IB_SDR;
+ ppd->delay_mult = rate_to_delay[0][1];
+ ppd->vls_supported = IB_VL_VL0;
+ ppd->vls_operational = ppd->vls_supported;
+
+ if (!qib_mini_init)
+ qib_write_kreg(dd, kr_rcvbthqp, QIB_KD_QP);
+
+ timer_setup(&ppd->cpspec->chase_timer, reenable_7220_chase, 0);
+
+ qib_num_cfg_vls = 1; /* if any 7220's, only one VL */
+
+ dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE;
+ dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE;
+ dd->rhf_offset =
+ dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
+
+ /* we always allocate at least 2048 bytes for eager buffers */
+ ret = ib_mtu_enum_to_int(qib_ibmtu);
+ dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU;
+ dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
+
+ qib_7220_tidtemplate(dd);
+
+ /*
+ * We can request a receive interrupt for 1 or
+ * more packets from current offset. For now, we set this
+ * up for a single packet.
+ */
+ dd->rhdrhead_intr_off = 1ULL << 32;
+
+ /* setup the stats timer; the add_timer is done at end of init */
+ timer_setup(&dd->stats_timer, qib_get_7220_faststats, 0);
+ dd->stats_timer.expires = jiffies + ACTIVITY_TIMER * HZ;
+
+ /*
+ * Control[4] has been added to change the arbitration within
+ * the SDMA engine between favoring data fetches over descriptor
+ * fetches. qib_sdma_fetch_arb==0 gives data fetches priority.
+ */
+ if (qib_sdma_fetch_arb)
+ dd->control |= 1 << 4;
+
+ dd->ureg_align = 0x10000; /* 64KB alignment */
+
+ dd->piosize2kmax_dwords = (dd->piosize2k >> 2)-1;
+ qib_7220_config_ctxts(dd);
+ qib_set_ctxtcnt(dd); /* needed for PAT setup */
+
+ ret = init_chip_wc_pat(dd, 0);
+ if (ret)
+ goto bail;
+ set_7220_baseaddrs(dd); /* set chip access pointers now */
+
+ ret = 0;
+ if (qib_mini_init)
+ goto bail;
+
+ ret = qib_create_ctxts(dd);
+ init_7220_cntrnames(dd);
+
+ /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA.
+ * reserve the update threshold amount for other kernel use, such
+ * as sending SMI, MAD, and ACKs, or 3, whichever is greater,
+ * unless we aren't enabling SDMA, in which case we want to use
+ * all the 4k bufs for the kernel.
+ * if this was less than the update threshold, we could wait
+ * a long time for an update. Coded this way because we
+ * sometimes change the update threshold for various reasons,
+ * and we want this to remain robust.
+ */
+ updthresh = 8U; /* update threshold */
+ if (dd->flags & QIB_HAS_SEND_DMA) {
+ dd->cspec->sdmabufcnt = dd->piobcnt4k;
+ sbufs = updthresh > 3 ? updthresh : 3;
+ } else {
+ dd->cspec->sdmabufcnt = 0;
+ sbufs = dd->piobcnt4k;
+ }
+
+ dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k -
+ dd->cspec->sdmabufcnt;
+ dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs;
+ dd->cspec->lastbuf_for_pio--; /* range is <= , not < */
+ dd->last_pio = dd->cspec->lastbuf_for_pio;
+ dd->pbufsctxt = dd->lastctxt_piobuf /
+ (dd->cfgctxts - dd->first_user_ctxt);
+
+ /*
+ * if we are at 16 user contexts, we will have one 7 sbufs
+ * per context, so drop the update threshold to match. We
+ * want to update before we actually run out, at low pbufs/ctxt
+ * so give ourselves some margin
+ */
+ if ((dd->pbufsctxt - 2) < updthresh)
+ updthresh = dd->pbufsctxt - 2;
+
+ dd->cspec->updthresh_dflt = updthresh;
+ dd->cspec->updthresh = updthresh;
+
+ /* before full enable, no interrupts, no locking needed */
+ dd->sendctrl |= (updthresh & SYM_RMASK(SendCtrl, AvailUpdThld))
+ << SYM_LSB(SendCtrl, AvailUpdThld);
+
+ dd->psxmitwait_supported = 1;
+ dd->psxmitwait_check_rate = QIB_7220_PSXMITWAIT_CHECK_RATE;
+bail:
+ return ret;
+}
+
+static u32 __iomem *qib_7220_getsendbuf(struct qib_pportdata *ppd, u64 pbc,
+ u32 *pbufnum)
+{
+ u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK;
+ struct qib_devdata *dd = ppd->dd;
+ u32 __iomem *buf;
+
+ if (((pbc >> 32) & PBC_7220_VL15_SEND_CTRL) &&
+ !(ppd->lflags & (QIBL_IB_AUTONEG_INPROG | QIBL_LINKACTIVE)))
+ buf = get_7220_link_buf(ppd, pbufnum);
+ else {
+ if ((plen + 1) > dd->piosize2kmax_dwords)
+ first = dd->piobcnt2k;
+ else
+ first = 0;
+ /* try 4k if all 2k busy, so same last for both sizes */
+ last = dd->cspec->lastbuf_for_pio;
+ buf = qib_getsendbuf_range(dd, pbufnum, first, last);
+ }
+ return buf;
+}
+
+/* these 2 "counters" are really control registers, and are always RW */
+static void qib_set_cntr_7220_sample(struct qib_pportdata *ppd, u32 intv,
+ u32 start)
+{
+ write_7220_creg(ppd->dd, cr_psinterval, intv);
+ write_7220_creg(ppd->dd, cr_psstart, start);
+}
+
+/*
+ * NOTE: no real attempt is made to generalize the SDMA stuff.
+ * At some point "soon" we will have a new more generalized
+ * set of sdma interface, and then we'll clean this up.
+ */
+
+/* Must be called with sdma_lock held, or before init finished */
+static void qib_sdma_update_7220_tail(struct qib_pportdata *ppd, u16 tail)
+{
+ /* Commit writes to memory and advance the tail on the chip */
+ wmb();
+ ppd->sdma_descq_tail = tail;
+ qib_write_kreg(ppd->dd, kr_senddmatail, tail);
+}
+
+static void qib_sdma_set_7220_desc_cnt(struct qib_pportdata *ppd, unsigned cnt)
+{
+}
+
+static struct sdma_set_state_action sdma_7220_action_table[] = {
+ [qib_sdma_state_s00_hw_down] = {
+ .op_enable = 0,
+ .op_intenable = 0,
+ .op_halt = 0,
+ .go_s99_running_tofalse = 1,
+ },
+ [qib_sdma_state_s10_hw_start_up_wait] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 1,
+ },
+ [qib_sdma_state_s20_idle] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 1,
+ },
+ [qib_sdma_state_s30_sw_clean_up_wait] = {
+ .op_enable = 0,
+ .op_intenable = 1,
+ .op_halt = 0,
+ },
+ [qib_sdma_state_s40_hw_clean_up_wait] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 1,
+ },
+ [qib_sdma_state_s50_hw_halt_wait] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 1,
+ },
+ [qib_sdma_state_s99_running] = {
+ .op_enable = 1,
+ .op_intenable = 1,
+ .op_halt = 0,
+ .go_s99_running_totrue = 1,
+ },
+};
+
+static void qib_7220_sdma_init_early(struct qib_pportdata *ppd)
+{
+ ppd->sdma_state.set_state_action = sdma_7220_action_table;
+}
+
+static int init_sdma_7220_regs(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ unsigned i, n;
+ u64 senddmabufmask[3] = { 0 };
+
+ /* Set SendDmaBase */
+ qib_write_kreg(dd, kr_senddmabase, ppd->sdma_descq_phys);
+ qib_sdma_7220_setlengen(ppd);
+ qib_sdma_update_7220_tail(ppd, 0); /* Set SendDmaTail */
+ /* Set SendDmaHeadAddr */
+ qib_write_kreg(dd, kr_senddmaheadaddr, ppd->sdma_head_phys);
+
+ /*
+ * Reserve all the former "kernel" piobufs, using high number range
+ * so we get as many 4K buffers as possible
+ */
+ n = dd->piobcnt2k + dd->piobcnt4k;
+ i = n - dd->cspec->sdmabufcnt;
+
+ for (; i < n; ++i) {
+ unsigned word = i / 64;
+ unsigned bit = i & 63;
+
+ senddmabufmask[word] |= 1ULL << bit;
+ }
+ qib_write_kreg(dd, kr_senddmabufmask0, senddmabufmask[0]);
+ qib_write_kreg(dd, kr_senddmabufmask1, senddmabufmask[1]);
+ qib_write_kreg(dd, kr_senddmabufmask2, senddmabufmask[2]);
+
+ ppd->sdma_state.first_sendbuf = i;
+ ppd->sdma_state.last_sendbuf = n;
+
+ return 0;
+}
+
+/* sdma_lock must be held */
+static u16 qib_sdma_7220_gethead(struct qib_pportdata *ppd)
+{
+ struct qib_devdata *dd = ppd->dd;
+ int sane;
+ int use_dmahead;
+ u16 swhead;
+ u16 swtail;
+ u16 cnt;
+ u16 hwhead;
+
+ use_dmahead = __qib_sdma_running(ppd) &&
+ (dd->flags & QIB_HAS_SDMA_TIMEOUT);
+retry:
+ hwhead = use_dmahead ?
+ (u16)le64_to_cpu(*ppd->sdma_head_dma) :
+ (u16)qib_read_kreg32(dd, kr_senddmahead);
+
+ swhead = ppd->sdma_descq_head;
+ swtail = ppd->sdma_descq_tail;
+ cnt = ppd->sdma_descq_cnt;
+
+ if (swhead < swtail) {
+ /* not wrapped */
+ sane = (hwhead >= swhead) & (hwhead <= swtail);
+ } else if (swhead > swtail) {
+ /* wrapped around */
+ sane = ((hwhead >= swhead) && (hwhead < cnt)) ||
+ (hwhead <= swtail);
+ } else {
+ /* empty */
+ sane = (hwhead == swhead);
+ }
+
+ if (unlikely(!sane)) {
+ if (use_dmahead) {
+ /* try one more time, directly from the register */
+ use_dmahead = 0;
+ goto retry;
+ }
+ /* assume no progress */
+ hwhead = swhead;
+ }
+
+ return hwhead;
+}
+
+static int qib_sdma_7220_busy(struct qib_pportdata *ppd)
+{
+ u64 hwstatus = qib_read_kreg64(ppd->dd, kr_senddmastatus);
+
+ return (hwstatus & SYM_MASK(SendDmaStatus, ScoreBoardDrainInProg)) ||
+ (hwstatus & SYM_MASK(SendDmaStatus, AbortInProg)) ||
+ (hwstatus & SYM_MASK(SendDmaStatus, InternalSDmaEnable)) ||
+ !(hwstatus & SYM_MASK(SendDmaStatus, ScbEmpty));
+}
+
+/*
+ * Compute the amount of delay before sending the next packet if the
+ * port's send rate differs from the static rate set for the QP.
+ * Since the delay affects this packet but the amount of the delay is
+ * based on the length of the previous packet, use the last delay computed
+ * and save the delay count for this packet to be used next time
+ * we get here.
+ */
+static u32 qib_7220_setpbc_control(struct qib_pportdata *ppd, u32 plen,
+ u8 srate, u8 vl)
+{
+ u8 snd_mult = ppd->delay_mult;
+ u8 rcv_mult = ib_rate_to_delay[srate];
+ u32 ret = ppd->cpspec->last_delay_mult;
+
+ ppd->cpspec->last_delay_mult = (rcv_mult > snd_mult) ?
+ (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0;
+
+ /* Indicate VL15, if necessary */
+ if (vl == 15)
+ ret |= PBC_7220_VL15_SEND_CTRL;
+ return ret;
+}
+
+static void qib_7220_initvl15_bufs(struct qib_devdata *dd)
+{
+}
+
+static void qib_7220_init_ctxt(struct qib_ctxtdata *rcd)
+{
+ if (!rcd->ctxt) {
+ rcd->rcvegrcnt = IBA7220_KRCVEGRCNT;
+ rcd->rcvegr_tid_base = 0;
+ } else {
+ rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt;
+ rcd->rcvegr_tid_base = IBA7220_KRCVEGRCNT +
+ (rcd->ctxt - 1) * rcd->rcvegrcnt;
+ }
+}
+
+static void qib_7220_txchk_change(struct qib_devdata *dd, u32 start,
+ u32 len, u32 which, struct qib_ctxtdata *rcd)
+{
+ int i;
+ unsigned long flags;
+
+ switch (which) {
+ case TXCHK_CHG_TYPE_KERN:
+ /* see if we need to raise avail update threshold */
+ spin_lock_irqsave(&dd->uctxt_lock, flags);
+ for (i = dd->first_user_ctxt;
+ dd->cspec->updthresh != dd->cspec->updthresh_dflt
+ && i < dd->cfgctxts; i++)
+ if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt &&
+ ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1)
+ < dd->cspec->updthresh_dflt)
+ break;
+ spin_unlock_irqrestore(&dd->uctxt_lock, flags);
+ if (i == dd->cfgctxts) {
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ dd->cspec->updthresh = dd->cspec->updthresh_dflt;
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
+ dd->sendctrl |= (dd->cspec->updthresh &
+ SYM_RMASK(SendCtrl, AvailUpdThld)) <<
+ SYM_LSB(SendCtrl, AvailUpdThld);
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+ }
+ break;
+ case TXCHK_CHG_TYPE_USER:
+ spin_lock_irqsave(&dd->sendctrl_lock, flags);
+ if (rcd && rcd->subctxt_cnt && ((rcd->piocnt
+ / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) {
+ dd->cspec->updthresh = (rcd->piocnt /
+ rcd->subctxt_cnt) - 1;
+ dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
+ dd->sendctrl |= (dd->cspec->updthresh &
+ SYM_RMASK(SendCtrl, AvailUpdThld))
+ << SYM_LSB(SendCtrl, AvailUpdThld);
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+ } else
+ spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+ break;
+ }
+}
+
+static void writescratch(struct qib_devdata *dd, u32 val)
+{
+ qib_write_kreg(dd, kr_scratch, val);
+}
+
+#define VALID_TS_RD_REG_MASK 0xBF
+/**
+ * qib_7220_tempsense_rd - read register of temp sensor via TWSI
+ * @dd: the qlogic_ib device
+ * @regnum: register to read from
+ *
+ * returns reg contents (0..255) or < 0 for error
+ */
+static int qib_7220_tempsense_rd(struct qib_devdata *dd, int regnum)
+{
+ int ret;
+ u8 rdata;
+
+ if (regnum > 7) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ /* return a bogus value for (the one) register we do not have */
+ if (!((1 << regnum) & VALID_TS_RD_REG_MASK)) {
+ ret = 0;
+ goto bail;
+ }
+
+ ret = mutex_lock_interruptible(&dd->eep_lock);
+ if (ret)
+ goto bail;
+
+ ret = qib_twsi_blk_rd(dd, QIB_TWSI_TEMP_DEV, regnum, &rdata, 1);
+ if (!ret)
+ ret = rdata;
+
+ mutex_unlock(&dd->eep_lock);
+
+ /*
+ * There are three possibilities here:
+ * ret is actual value (0..255)
+ * ret is -ENXIO or -EINVAL from twsi code or this file
+ * ret is -EINTR from mutex_lock_interruptible.
+ */
+bail:
+ return ret;
+}
+
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+static int qib_7220_notify_dca(struct qib_devdata *dd, unsigned long event)
+{
+ return 0;
+}
+#endif
+
+/* Dummy function, as 7220 boards never disable EEPROM Write */
+static int qib_7220_eeprom_wen(struct qib_devdata *dd, int wen)
+{
+ return 1;
+}
+
+/**
+ * qib_init_iba7220_funcs - set up the chip-specific function pointers
+ * @pdev: the pci_dev for qlogic_ib device
+ * @ent: pci_device_id struct for this dev
+ *
+ * This is global, and is called directly at init to set up the
+ * chip-specific function pointers for later use.
+ */
+struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct qib_devdata *dd;
+ int ret;
+ u32 boardid, minwidth;
+
+ dd = qib_alloc_devdata(pdev, sizeof(struct qib_chip_specific) +
+ sizeof(struct qib_chippport_specific));
+ if (IS_ERR(dd))
+ goto bail;
+
+ dd->f_bringup_serdes = qib_7220_bringup_serdes;
+ dd->f_cleanup = qib_setup_7220_cleanup;
+ dd->f_clear_tids = qib_7220_clear_tids;
+ dd->f_free_irq = qib_free_irq;
+ dd->f_get_base_info = qib_7220_get_base_info;
+ dd->f_get_msgheader = qib_7220_get_msgheader;
+ dd->f_getsendbuf = qib_7220_getsendbuf;
+ dd->f_gpio_mod = gpio_7220_mod;
+ dd->f_eeprom_wen = qib_7220_eeprom_wen;
+ dd->f_hdrqempty = qib_7220_hdrqempty;
+ dd->f_ib_updown = qib_7220_ib_updown;
+ dd->f_init_ctxt = qib_7220_init_ctxt;
+ dd->f_initvl15_bufs = qib_7220_initvl15_bufs;
+ dd->f_intr_fallback = qib_7220_intr_fallback;
+ dd->f_late_initreg = qib_late_7220_initreg;
+ dd->f_setpbc_control = qib_7220_setpbc_control;
+ dd->f_portcntr = qib_portcntr_7220;
+ dd->f_put_tid = qib_7220_put_tid;
+ dd->f_quiet_serdes = qib_7220_quiet_serdes;
+ dd->f_rcvctrl = rcvctrl_7220_mod;
+ dd->f_read_cntrs = qib_read_7220cntrs;
+ dd->f_read_portcntrs = qib_read_7220portcntrs;
+ dd->f_reset = qib_setup_7220_reset;
+ dd->f_init_sdma_regs = init_sdma_7220_regs;
+ dd->f_sdma_busy = qib_sdma_7220_busy;
+ dd->f_sdma_gethead = qib_sdma_7220_gethead;
+ dd->f_sdma_sendctrl = qib_7220_sdma_sendctrl;
+ dd->f_sdma_set_desc_cnt = qib_sdma_set_7220_desc_cnt;
+ dd->f_sdma_update_tail = qib_sdma_update_7220_tail;
+ dd->f_sdma_hw_clean_up = qib_7220_sdma_hw_clean_up;
+ dd->f_sdma_hw_start_up = qib_7220_sdma_hw_start_up;
+ dd->f_sdma_init_early = qib_7220_sdma_init_early;
+ dd->f_sendctrl = sendctrl_7220_mod;
+ dd->f_set_armlaunch = qib_set_7220_armlaunch;
+ dd->f_set_cntr_sample = qib_set_cntr_7220_sample;
+ dd->f_iblink_state = qib_7220_iblink_state;
+ dd->f_ibphys_portstate = qib_7220_phys_portstate;
+ dd->f_get_ib_cfg = qib_7220_get_ib_cfg;
+ dd->f_set_ib_cfg = qib_7220_set_ib_cfg;
+ dd->f_set_ib_loopback = qib_7220_set_loopback;
+ dd->f_set_intr_state = qib_7220_set_intr_state;
+ dd->f_setextled = qib_setup_7220_setextled;
+ dd->f_txchk_change = qib_7220_txchk_change;
+ dd->f_update_usrhead = qib_update_7220_usrhead;
+ dd->f_wantpiobuf_intr = qib_wantpiobuf_7220_intr;
+ dd->f_xgxs_reset = qib_7220_xgxs_reset;
+ dd->f_writescratch = writescratch;
+ dd->f_tempsense_rd = qib_7220_tempsense_rd;
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+ dd->f_notify_dca = qib_7220_notify_dca;
+#endif
+ /*
+ * Do remaining pcie setup and save pcie values in dd.
+ * Any error printing is already done by the init code.
+ * On return, we have the chip mapped, but chip registers
+ * are not set up until start of qib_init_7220_variables.
+ */
+ ret = qib_pcie_ddinit(dd, pdev, ent);
+ if (ret < 0)
+ goto bail_free;
+
+ /* initialize chip-specific variables */
+ ret = qib_init_7220_variables(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ if (qib_mini_init)
+ goto bail;
+
+ boardid = SYM_FIELD(dd->revision, Revision,
+ BoardID);
+ switch (boardid) {
+ case 0:
+ case 2:
+ case 10:
+ case 12:
+ minwidth = 16; /* x16 capable boards */
+ break;
+ default:
+ minwidth = 8; /* x8 capable boards */
+ break;
+ }
+ if (qib_pcie_params(dd, minwidth, NULL))
+ qib_dev_err(dd,
+ "Failed to setup PCIe or interrupts; continuing anyway\n");
+
+ if (qib_read_kreg64(dd, kr_hwerrstatus) &
+ QLOGIC_IB_HWE_SERDESPLLFAILED)
+ qib_write_kreg(dd, kr_hwerrclear,
+ QLOGIC_IB_HWE_SERDESPLLFAILED);
+
+ /* setup interrupt handler (interrupt type handled above) */
+ qib_setup_7220_interrupt(dd);
+ qib_7220_init_hwerrors(dd);
+
+ /* clear diagctrl register, in case diags were running and crashed */
+ qib_write_kreg(dd, kr_hwdiagctrl, 0);
+
+ goto bail;
+
+bail_cleanup:
+ qib_pcie_ddcleanup(dd);
+bail_free:
+ qib_free_devdata(dd);
+ dd = ERR_PTR(ret);
+bail:
+ return dd;
+}