summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib/qib_qsfp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_qsfp.c')
-rw-r--r--drivers/infiniband/hw/qib/qib_qsfp.c549
1 files changed, 549 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_qsfp.c b/drivers/infiniband/hw/qib/qib_qsfp.c
new file mode 100644
index 000000000..295d40a83
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_qsfp.c
@@ -0,0 +1,549 @@
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+
+#include "qib.h"
+#include "qib_qsfp.h"
+
+/*
+ * QSFP support for ib_qib driver, using "Two Wire Serial Interface" driver
+ * in qib_twsi.c
+ */
+#define QSFP_MAX_RETRY 4
+
+static int qsfp_read(struct qib_pportdata *ppd, int addr, void *bp, int len)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u32 out, mask;
+ int ret, cnt, pass = 0;
+ int stuck = 0;
+ u8 *buff = bp;
+
+ ret = mutex_lock_interruptible(&dd->eep_lock);
+ if (ret)
+ goto no_unlock;
+
+ if (dd->twsi_eeprom_dev == QIB_TWSI_NO_DEV) {
+ ret = -ENXIO;
+ goto bail;
+ }
+
+ /*
+ * We presume, if we are called at all, that this board has
+ * QSFP. This is on the same i2c chain as the legacy parts,
+ * but only responds if the module is selected via GPIO pins.
+ * Further, there are very long setup and hold requirements
+ * on MODSEL.
+ */
+ mask = QSFP_GPIO_MOD_SEL_N | QSFP_GPIO_MOD_RST_N | QSFP_GPIO_LP_MODE;
+ out = QSFP_GPIO_MOD_RST_N | QSFP_GPIO_LP_MODE;
+ if (ppd->hw_pidx) {
+ mask <<= QSFP_GPIO_PORT2_SHIFT;
+ out <<= QSFP_GPIO_PORT2_SHIFT;
+ }
+
+ dd->f_gpio_mod(dd, out, mask, mask);
+
+ /*
+ * Module could take up to 2 Msec to respond to MOD_SEL, and there
+ * is no way to tell if it is ready, so we must wait.
+ */
+ msleep(20);
+
+ /* Make sure TWSI bus is in sane state. */
+ ret = qib_twsi_reset(dd);
+ if (ret) {
+ qib_dev_porterr(dd, ppd->port,
+ "QSFP interface Reset for read failed\n");
+ ret = -EIO;
+ stuck = 1;
+ goto deselect;
+ }
+
+ /* All QSFP modules are at A0 */
+
+ cnt = 0;
+ while (cnt < len) {
+ unsigned in_page;
+ int wlen = len - cnt;
+
+ in_page = addr % QSFP_PAGESIZE;
+ if ((in_page + wlen) > QSFP_PAGESIZE)
+ wlen = QSFP_PAGESIZE - in_page;
+ ret = qib_twsi_blk_rd(dd, QSFP_DEV, addr, buff + cnt, wlen);
+ /* Some QSFP's fail first try. Retry as experiment */
+ if (ret && cnt == 0 && ++pass < QSFP_MAX_RETRY)
+ continue;
+ if (ret) {
+ /* qib_twsi_blk_rd() 1 for error, else 0 */
+ ret = -EIO;
+ goto deselect;
+ }
+ addr += wlen;
+ cnt += wlen;
+ }
+ ret = cnt;
+
+deselect:
+ /*
+ * Module could take up to 10 uSec after transfer before
+ * ready to respond to MOD_SEL negation, and there is no way
+ * to tell if it is ready, so we must wait.
+ */
+ udelay(10);
+ /* set QSFP MODSEL, RST. LP all high */
+ dd->f_gpio_mod(dd, mask, mask, mask);
+
+ /*
+ * Module could take up to 2 Msec to respond to MOD_SEL
+ * going away, and there is no way to tell if it is ready.
+ * so we must wait.
+ */
+ if (stuck)
+ qib_dev_err(dd, "QSFP interface bus stuck non-idle\n");
+
+ if (pass >= QSFP_MAX_RETRY && ret)
+ qib_dev_porterr(dd, ppd->port, "QSFP failed even retrying\n");
+ else if (pass)
+ qib_dev_porterr(dd, ppd->port, "QSFP retries: %d\n", pass);
+
+ msleep(20);
+
+bail:
+ mutex_unlock(&dd->eep_lock);
+
+no_unlock:
+ return ret;
+}
+
+/*
+ * qsfp_write
+ * We do not ordinarily write the QSFP, but this is needed to select
+ * the page on non-flat QSFPs, and possibly later unusual cases
+ */
+static int qib_qsfp_write(struct qib_pportdata *ppd, int addr, void *bp,
+ int len)
+{
+ struct qib_devdata *dd = ppd->dd;
+ u32 out, mask;
+ int ret, cnt;
+ u8 *buff = bp;
+
+ ret = mutex_lock_interruptible(&dd->eep_lock);
+ if (ret)
+ goto no_unlock;
+
+ if (dd->twsi_eeprom_dev == QIB_TWSI_NO_DEV) {
+ ret = -ENXIO;
+ goto bail;
+ }
+
+ /*
+ * We presume, if we are called at all, that this board has
+ * QSFP. This is on the same i2c chain as the legacy parts,
+ * but only responds if the module is selected via GPIO pins.
+ * Further, there are very long setup and hold requirements
+ * on MODSEL.
+ */
+ mask = QSFP_GPIO_MOD_SEL_N | QSFP_GPIO_MOD_RST_N | QSFP_GPIO_LP_MODE;
+ out = QSFP_GPIO_MOD_RST_N | QSFP_GPIO_LP_MODE;
+ if (ppd->hw_pidx) {
+ mask <<= QSFP_GPIO_PORT2_SHIFT;
+ out <<= QSFP_GPIO_PORT2_SHIFT;
+ }
+ dd->f_gpio_mod(dd, out, mask, mask);
+
+ /*
+ * Module could take up to 2 Msec to respond to MOD_SEL,
+ * and there is no way to tell if it is ready, so we must wait.
+ */
+ msleep(20);
+
+ /* Make sure TWSI bus is in sane state. */
+ ret = qib_twsi_reset(dd);
+ if (ret) {
+ qib_dev_porterr(dd, ppd->port,
+ "QSFP interface Reset for write failed\n");
+ ret = -EIO;
+ goto deselect;
+ }
+
+ /* All QSFP modules are at A0 */
+
+ cnt = 0;
+ while (cnt < len) {
+ unsigned in_page;
+ int wlen = len - cnt;
+
+ in_page = addr % QSFP_PAGESIZE;
+ if ((in_page + wlen) > QSFP_PAGESIZE)
+ wlen = QSFP_PAGESIZE - in_page;
+ ret = qib_twsi_blk_wr(dd, QSFP_DEV, addr, buff + cnt, wlen);
+ if (ret) {
+ /* qib_twsi_blk_wr() 1 for error, else 0 */
+ ret = -EIO;
+ goto deselect;
+ }
+ addr += wlen;
+ cnt += wlen;
+ }
+ ret = cnt;
+
+deselect:
+ /*
+ * Module could take up to 10 uSec after transfer before
+ * ready to respond to MOD_SEL negation, and there is no way
+ * to tell if it is ready, so we must wait.
+ */
+ udelay(10);
+ /* set QSFP MODSEL, RST, LP high */
+ dd->f_gpio_mod(dd, mask, mask, mask);
+ /*
+ * Module could take up to 2 Msec to respond to MOD_SEL
+ * going away, and there is no way to tell if it is ready.
+ * so we must wait.
+ */
+ msleep(20);
+
+bail:
+ mutex_unlock(&dd->eep_lock);
+
+no_unlock:
+ return ret;
+}
+
+/*
+ * For validation, we want to check the checksums, even of the
+ * fields we do not otherwise use. This function reads the bytes from
+ * <first> to <next-1> and returns the 8lsbs of the sum, or <0 for errors
+ */
+static int qsfp_cks(struct qib_pportdata *ppd, int first, int next)
+{
+ int ret;
+ u16 cks;
+ u8 bval;
+
+ cks = 0;
+ while (first < next) {
+ ret = qsfp_read(ppd, first, &bval, 1);
+ if (ret < 0)
+ goto bail;
+ cks += bval;
+ ++first;
+ }
+ ret = cks & 0xFF;
+bail:
+ return ret;
+
+}
+
+int qib_refresh_qsfp_cache(struct qib_pportdata *ppd, struct qib_qsfp_cache *cp)
+{
+ int ret;
+ int idx;
+ u16 cks;
+ u8 peek[4];
+
+ /* ensure sane contents on invalid reads, for cable swaps */
+ memset(cp, 0, sizeof(*cp));
+
+ if (!qib_qsfp_mod_present(ppd)) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ ret = qsfp_read(ppd, 0, peek, 3);
+ if (ret < 0)
+ goto bail;
+ if ((peek[0] & 0xFE) != 0x0C)
+ qib_dev_porterr(ppd->dd, ppd->port,
+ "QSFP byte0 is 0x%02X, S/B 0x0C/D\n", peek[0]);
+
+ if ((peek[2] & 4) == 0) {
+ /*
+ * If cable is paged, rather than "flat memory", we need to
+ * set the page to zero, Even if it already appears to be zero.
+ */
+ u8 poke = 0;
+
+ ret = qib_qsfp_write(ppd, 127, &poke, 1);
+ udelay(50);
+ if (ret != 1) {
+ qib_dev_porterr(ppd->dd, ppd->port,
+ "Failed QSFP Page set\n");
+ goto bail;
+ }
+ }
+
+ ret = qsfp_read(ppd, QSFP_MOD_ID_OFFS, &cp->id, 1);
+ if (ret < 0)
+ goto bail;
+ if ((cp->id & 0xFE) != 0x0C)
+ qib_dev_porterr(ppd->dd, ppd->port,
+ "QSFP ID byte is 0x%02X, S/B 0x0C/D\n", cp->id);
+ cks = cp->id;
+
+ ret = qsfp_read(ppd, QSFP_MOD_PWR_OFFS, &cp->pwr, 1);
+ if (ret < 0)
+ goto bail;
+ cks += cp->pwr;
+
+ ret = qsfp_cks(ppd, QSFP_MOD_PWR_OFFS + 1, QSFP_MOD_LEN_OFFS);
+ if (ret < 0)
+ goto bail;
+ cks += ret;
+
+ ret = qsfp_read(ppd, QSFP_MOD_LEN_OFFS, &cp->len, 1);
+ if (ret < 0)
+ goto bail;
+ cks += cp->len;
+
+ ret = qsfp_read(ppd, QSFP_MOD_TECH_OFFS, &cp->tech, 1);
+ if (ret < 0)
+ goto bail;
+ cks += cp->tech;
+
+ ret = qsfp_read(ppd, QSFP_VEND_OFFS, &cp->vendor, QSFP_VEND_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_VEND_LEN; ++idx)
+ cks += cp->vendor[idx];
+
+ ret = qsfp_read(ppd, QSFP_IBXCV_OFFS, &cp->xt_xcv, 1);
+ if (ret < 0)
+ goto bail;
+ cks += cp->xt_xcv;
+
+ ret = qsfp_read(ppd, QSFP_VOUI_OFFS, &cp->oui, QSFP_VOUI_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_VOUI_LEN; ++idx)
+ cks += cp->oui[idx];
+
+ ret = qsfp_read(ppd, QSFP_PN_OFFS, &cp->partnum, QSFP_PN_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_PN_LEN; ++idx)
+ cks += cp->partnum[idx];
+
+ ret = qsfp_read(ppd, QSFP_REV_OFFS, &cp->rev, QSFP_REV_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_REV_LEN; ++idx)
+ cks += cp->rev[idx];
+
+ ret = qsfp_read(ppd, QSFP_ATTEN_OFFS, &cp->atten, QSFP_ATTEN_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_ATTEN_LEN; ++idx)
+ cks += cp->atten[idx];
+
+ ret = qsfp_cks(ppd, QSFP_ATTEN_OFFS + QSFP_ATTEN_LEN, QSFP_CC_OFFS);
+ if (ret < 0)
+ goto bail;
+ cks += ret;
+
+ cks &= 0xFF;
+ ret = qsfp_read(ppd, QSFP_CC_OFFS, &cp->cks1, 1);
+ if (ret < 0)
+ goto bail;
+ if (cks != cp->cks1)
+ qib_dev_porterr(ppd->dd, ppd->port,
+ "QSFP cks1 is %02X, computed %02X\n", cp->cks1,
+ cks);
+
+ /* Second checksum covers 192 to (serial, date, lot) */
+ ret = qsfp_cks(ppd, QSFP_CC_OFFS + 1, QSFP_SN_OFFS);
+ if (ret < 0)
+ goto bail;
+ cks = ret;
+
+ ret = qsfp_read(ppd, QSFP_SN_OFFS, &cp->serial, QSFP_SN_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_SN_LEN; ++idx)
+ cks += cp->serial[idx];
+
+ ret = qsfp_read(ppd, QSFP_DATE_OFFS, &cp->date, QSFP_DATE_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_DATE_LEN; ++idx)
+ cks += cp->date[idx];
+
+ ret = qsfp_read(ppd, QSFP_LOT_OFFS, &cp->lot, QSFP_LOT_LEN);
+ if (ret < 0)
+ goto bail;
+ for (idx = 0; idx < QSFP_LOT_LEN; ++idx)
+ cks += cp->lot[idx];
+
+ ret = qsfp_cks(ppd, QSFP_LOT_OFFS + QSFP_LOT_LEN, QSFP_CC_EXT_OFFS);
+ if (ret < 0)
+ goto bail;
+ cks += ret;
+
+ ret = qsfp_read(ppd, QSFP_CC_EXT_OFFS, &cp->cks2, 1);
+ if (ret < 0)
+ goto bail;
+ cks &= 0xFF;
+ if (cks != cp->cks2)
+ qib_dev_porterr(ppd->dd, ppd->port,
+ "QSFP cks2 is %02X, computed %02X\n", cp->cks2,
+ cks);
+ return 0;
+
+bail:
+ cp->id = 0;
+ return ret;
+}
+
+const char * const qib_qsfp_devtech[16] = {
+ "850nm VCSEL", "1310nm VCSEL", "1550nm VCSEL", "1310nm FP",
+ "1310nm DFB", "1550nm DFB", "1310nm EML", "1550nm EML",
+ "Cu Misc", "1490nm DFB", "Cu NoEq", "Cu Eq",
+ "Undef", "Cu Active BothEq", "Cu FarEq", "Cu NearEq"
+};
+
+#define QSFP_DUMP_CHUNK 16 /* Holds longest string */
+#define QSFP_DEFAULT_HDR_CNT 224
+
+static const char *pwr_codes = "1.5W2.0W2.5W3.5W";
+
+int qib_qsfp_mod_present(struct qib_pportdata *ppd)
+{
+ u32 mask;
+ int ret;
+
+ mask = QSFP_GPIO_MOD_PRS_N <<
+ (ppd->hw_pidx * QSFP_GPIO_PORT2_SHIFT);
+ ret = ppd->dd->f_gpio_mod(ppd->dd, 0, 0, 0);
+
+ return !((ret & mask) >>
+ ((ppd->hw_pidx * QSFP_GPIO_PORT2_SHIFT) + 3));
+}
+
+/*
+ * Initialize structures that control access to QSFP. Called once per port
+ * on cards that support QSFP.
+ */
+void qib_qsfp_init(struct qib_qsfp_data *qd,
+ void (*fevent)(struct work_struct *))
+{
+ u32 mask, highs;
+
+ struct qib_devdata *dd = qd->ppd->dd;
+
+ /* Initialize work struct for later QSFP events */
+ INIT_WORK(&qd->work, fevent);
+
+ /*
+ * Later, we may want more validation. For now, just set up pins and
+ * blip reset. If module is present, call qib_refresh_qsfp_cache(),
+ * to do further init.
+ */
+ mask = QSFP_GPIO_MOD_SEL_N | QSFP_GPIO_MOD_RST_N | QSFP_GPIO_LP_MODE;
+ highs = mask - QSFP_GPIO_MOD_RST_N;
+ if (qd->ppd->hw_pidx) {
+ mask <<= QSFP_GPIO_PORT2_SHIFT;
+ highs <<= QSFP_GPIO_PORT2_SHIFT;
+ }
+ dd->f_gpio_mod(dd, highs, mask, mask);
+ udelay(20); /* Generous RST dwell */
+
+ dd->f_gpio_mod(dd, mask, mask, mask);
+}
+
+int qib_qsfp_dump(struct qib_pportdata *ppd, char *buf, int len)
+{
+ struct qib_qsfp_cache cd;
+ u8 bin_buff[QSFP_DUMP_CHUNK];
+ char lenstr[6];
+ int sofar, ret;
+ int bidx = 0;
+
+ sofar = 0;
+ ret = qib_refresh_qsfp_cache(ppd, &cd);
+ if (ret < 0)
+ goto bail;
+
+ lenstr[0] = ' ';
+ lenstr[1] = '\0';
+ if (QSFP_IS_CU(cd.tech))
+ sprintf(lenstr, "%dM ", cd.len);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "PWR:%.3sW\n", pwr_codes +
+ (QSFP_PWR(cd.pwr) * 4));
+
+ sofar += scnprintf(buf + sofar, len - sofar, "TECH:%s%s\n", lenstr,
+ qib_qsfp_devtech[cd.tech >> 4]);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Vendor:%.*s\n",
+ QSFP_VEND_LEN, cd.vendor);
+
+ sofar += scnprintf(buf + sofar, len - sofar, "OUI:%06X\n",
+ QSFP_OUI(cd.oui));
+
+ sofar += scnprintf(buf + sofar, len - sofar, "Part#:%.*s\n",
+ QSFP_PN_LEN, cd.partnum);
+ sofar += scnprintf(buf + sofar, len - sofar, "Rev:%.*s\n",
+ QSFP_REV_LEN, cd.rev);
+ if (QSFP_IS_CU(cd.tech))
+ sofar += scnprintf(buf + sofar, len - sofar, "Atten:%d, %d\n",
+ QSFP_ATTEN_SDR(cd.atten),
+ QSFP_ATTEN_DDR(cd.atten));
+ sofar += scnprintf(buf + sofar, len - sofar, "Serial:%.*s\n",
+ QSFP_SN_LEN, cd.serial);
+ sofar += scnprintf(buf + sofar, len - sofar, "Date:%.*s\n",
+ QSFP_DATE_LEN, cd.date);
+ sofar += scnprintf(buf + sofar, len - sofar, "Lot:%.*s\n",
+ QSFP_LOT_LEN, cd.lot);
+
+ while (bidx < QSFP_DEFAULT_HDR_CNT) {
+ int iidx;
+
+ ret = qsfp_read(ppd, bidx, bin_buff, QSFP_DUMP_CHUNK);
+ if (ret < 0)
+ goto bail;
+ for (iidx = 0; iidx < ret; ++iidx) {
+ sofar += scnprintf(buf + sofar, len-sofar, " %02X",
+ bin_buff[iidx]);
+ }
+ sofar += scnprintf(buf + sofar, len - sofar, "\n");
+ bidx += QSFP_DUMP_CHUNK;
+ }
+ ret = sofar;
+bail:
+ return ret;
+}