diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 1582 |
1 files changed, 1582 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c new file mode 100644 index 000000000..3f0732db7 --- /dev/null +++ b/drivers/input/touchscreen/goodix.c @@ -0,0 +1,1582 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Goodix Touchscreens + * + * Copyright (c) 2014 Red Hat Inc. + * Copyright (c) 2015 K. Merker <merker@debian.org> + * + * This code is based on gt9xx.c authored by andrew@goodix.com: + * + * 2010 - 2012 Goodix Technology. + */ + + +#include <linux/kernel.h> +#include <linux/dmi.h> +#include <linux/firmware.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/platform_data/x86/soc.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/of.h> +#include <asm/unaligned.h> +#include "goodix.h" + +#define GOODIX_GPIO_INT_NAME "irq" +#define GOODIX_GPIO_RST_NAME "reset" + +#define GOODIX_MAX_HEIGHT 4096 +#define GOODIX_MAX_WIDTH 4096 +#define GOODIX_INT_TRIGGER 1 +#define GOODIX_CONTACT_SIZE 8 +#define GOODIX_MAX_CONTACT_SIZE 9 +#define GOODIX_MAX_CONTACTS 10 + +#define GOODIX_CONFIG_MIN_LENGTH 186 +#define GOODIX_CONFIG_911_LENGTH 186 +#define GOODIX_CONFIG_967_LENGTH 228 +#define GOODIX_CONFIG_GT9X_LENGTH 240 + +#define GOODIX_BUFFER_STATUS_READY BIT(7) +#define GOODIX_HAVE_KEY BIT(4) +#define GOODIX_BUFFER_STATUS_TIMEOUT 20 + +#define RESOLUTION_LOC 1 +#define MAX_CONTACTS_LOC 5 +#define TRIGGER_LOC 6 + +/* Our special handling for GPIO accesses through ACPI is x86 specific */ +#if defined CONFIG_X86 && defined CONFIG_ACPI +#define ACPI_GPIO_SUPPORT +#endif + +struct goodix_chip_id { + const char *id; + const struct goodix_chip_data *data; +}; + +static int goodix_check_cfg_8(struct goodix_ts_data *ts, + const u8 *cfg, int len); +static int goodix_check_cfg_16(struct goodix_ts_data *ts, + const u8 *cfg, int len); +static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts); +static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts); + +static const struct goodix_chip_data gt1x_chip_data = { + .config_addr = GOODIX_GT1X_REG_CONFIG_DATA, + .config_len = GOODIX_CONFIG_GT9X_LENGTH, + .check_config = goodix_check_cfg_16, + .calc_config_checksum = goodix_calc_cfg_checksum_16, +}; + +static const struct goodix_chip_data gt911_chip_data = { + .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, + .config_len = GOODIX_CONFIG_911_LENGTH, + .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, +}; + +static const struct goodix_chip_data gt967_chip_data = { + .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, + .config_len = GOODIX_CONFIG_967_LENGTH, + .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, +}; + +static const struct goodix_chip_data gt9x_chip_data = { + .config_addr = GOODIX_GT9X_REG_CONFIG_DATA, + .config_len = GOODIX_CONFIG_GT9X_LENGTH, + .check_config = goodix_check_cfg_8, + .calc_config_checksum = goodix_calc_cfg_checksum_8, +}; + +static const struct goodix_chip_id goodix_chip_ids[] = { + { .id = "1151", .data = >1x_chip_data }, + { .id = "1158", .data = >1x_chip_data }, + { .id = "5663", .data = >1x_chip_data }, + { .id = "5688", .data = >1x_chip_data }, + { .id = "917S", .data = >1x_chip_data }, + { .id = "9286", .data = >1x_chip_data }, + + { .id = "911", .data = >911_chip_data }, + { .id = "9271", .data = >911_chip_data }, + { .id = "9110", .data = >911_chip_data }, + { .id = "9111", .data = >911_chip_data }, + { .id = "927", .data = >911_chip_data }, + { .id = "928", .data = >911_chip_data }, + + { .id = "912", .data = >967_chip_data }, + { .id = "9147", .data = >967_chip_data }, + { .id = "967", .data = >967_chip_data }, + { } +}; + +static const unsigned long goodix_irq_flags[] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, +}; + +static const struct dmi_system_id nine_bytes_report[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + /* Lenovo Yoga Book X90F / X90L */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"), + } + }, + { + /* Lenovo Yoga Book X91F / X91L */ + .matches = { + /* Non exact match to match F + L versions */ + DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"), + } + }, +#endif + {} +}; + +/* + * Those tablets have their x coordinate inverted + */ +static const struct dmi_system_id inverted_x_screen[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + .ident = "Cube I15-TC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Cube"), + DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC") + }, + }, +#endif + {} +}; + +/** + * goodix_i2c_read - read data from a register of the i2c slave device. + * + * @client: i2c device. + * @reg: the register to read from. + * @buf: raw write data buffer. + * @len: length of the buffer to write + */ +int goodix_i2c_read(struct i2c_client *client, u16 reg, u8 *buf, int len) +{ + struct i2c_msg msgs[2]; + __be16 wbuf = cpu_to_be16(reg); + int ret; + + msgs[0].flags = 0; + msgs[0].addr = client->addr; + msgs[0].len = 2; + msgs[0].buf = (u8 *)&wbuf; + + msgs[1].flags = I2C_M_RD; + msgs[1].addr = client->addr; + msgs[1].len = len; + msgs[1].buf = buf; + + ret = i2c_transfer(client->adapter, msgs, 2); + if (ret >= 0) + ret = (ret == ARRAY_SIZE(msgs) ? 0 : -EIO); + + if (ret) + dev_err(&client->dev, "Error reading %d bytes from 0x%04x: %d\n", + len, reg, ret); + return ret; +} + +/** + * goodix_i2c_write - write data to a register of the i2c slave device. + * + * @client: i2c device. + * @reg: the register to write to. + * @buf: raw data buffer to write. + * @len: length of the buffer to write + */ +int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, int len) +{ + u8 *addr_buf; + struct i2c_msg msg; + int ret; + + addr_buf = kmalloc(len + 2, GFP_KERNEL); + if (!addr_buf) + return -ENOMEM; + + addr_buf[0] = reg >> 8; + addr_buf[1] = reg & 0xFF; + memcpy(&addr_buf[2], buf, len); + + msg.flags = 0; + msg.addr = client->addr; + msg.buf = addr_buf; + msg.len = len + 2; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret >= 0) + ret = (ret == 1 ? 0 : -EIO); + + kfree(addr_buf); + + if (ret) + dev_err(&client->dev, "Error writing %d bytes to 0x%04x: %d\n", + len, reg, ret); + return ret; +} + +int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value) +{ + return goodix_i2c_write(client, reg, &value, sizeof(value)); +} + +static const struct goodix_chip_data *goodix_get_chip_data(const char *id) +{ + unsigned int i; + + for (i = 0; goodix_chip_ids[i].id; i++) { + if (!strcmp(goodix_chip_ids[i].id, id)) + return goodix_chip_ids[i].data; + } + + return >9x_chip_data; +} + +static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) +{ + unsigned long max_timeout; + int touch_num; + int error; + u16 addr = GOODIX_READ_COOR_ADDR; + /* + * We are going to read 1-byte header, + * ts->contact_size * max(1, touch_num) bytes of coordinates + * and 1-byte footer which contains the touch-key code. + */ + const int header_contact_keycode_size = 1 + ts->contact_size + 1; + + /* + * The 'buffer status' bit, which indicates that the data is valid, is + * not set as soon as the interrupt is raised, but slightly after. + * This takes around 10 ms to happen, so we poll for 20 ms. + */ + max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT); + do { + error = goodix_i2c_read(ts->client, addr, data, + header_contact_keycode_size); + if (error) + return error; + + if (data[0] & GOODIX_BUFFER_STATUS_READY) { + touch_num = data[0] & 0x0f; + if (touch_num > ts->max_touch_num) + return -EPROTO; + + if (touch_num > 1) { + addr += header_contact_keycode_size; + data += header_contact_keycode_size; + error = goodix_i2c_read(ts->client, + addr, data, + ts->contact_size * + (touch_num - 1)); + if (error) + return error; + } + + return touch_num; + } + + if (data[0] == 0 && ts->firmware_name) { + if (goodix_handle_fw_request(ts)) + return 0; + } + + usleep_range(1000, 2000); /* Poll every 1 - 2 ms */ + } while (time_before(jiffies, max_timeout)); + + /* + * The Goodix panel will send spurious interrupts after a + * 'finger up' event, which will always cause a timeout. + */ + return -ENOMSG; +} + +static int goodix_create_pen_input(struct goodix_ts_data *ts) +{ + struct device *dev = &ts->client->dev; + struct input_dev *input; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + input_copy_abs(input, ABS_X, ts->input_dev, ABS_MT_POSITION_X); + input_copy_abs(input, ABS_Y, ts->input_dev, ABS_MT_POSITION_Y); + /* + * The resolution of these touchscreens is about 10 units/mm, the actual + * resolution does not matter much since we set INPUT_PROP_DIRECT. + * Userspace wants something here though, so just set it to 10 units/mm. + */ + input_abs_set_res(input, ABS_X, 10); + input_abs_set_res(input, ABS_Y, 10); + input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0); + + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_STYLUS2); + __set_bit(INPUT_PROP_DIRECT, input->propbit); + + input->name = "Goodix Active Pen"; + input->phys = "input/pen"; + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0416; + if (kstrtou16(ts->id, 10, &input->id.product)) + input->id.product = 0x1001; + input->id.version = ts->version; + + ts->input_pen = input; + return 0; +} + +static void goodix_ts_report_pen_down(struct goodix_ts_data *ts, u8 *data) +{ + int input_x, input_y, input_w, error; + u8 key_value; + + if (!ts->pen_input_registered) { + error = input_register_device(ts->input_pen); + ts->pen_input_registered = (error == 0) ? 1 : error; + } + + if (ts->pen_input_registered < 0) + return; + + if (ts->contact_size == 9) { + input_x = get_unaligned_le16(&data[4]); + input_y = get_unaligned_le16(&data[6]); + input_w = get_unaligned_le16(&data[8]); + } else { + input_x = get_unaligned_le16(&data[2]); + input_y = get_unaligned_le16(&data[4]); + input_w = get_unaligned_le16(&data[6]); + } + + touchscreen_report_pos(ts->input_pen, &ts->prop, input_x, input_y, false); + input_report_abs(ts->input_pen, ABS_PRESSURE, input_w); + + input_report_key(ts->input_pen, BTN_TOUCH, 1); + input_report_key(ts->input_pen, BTN_TOOL_PEN, 1); + + if (data[0] & GOODIX_HAVE_KEY) { + key_value = data[1 + ts->contact_size]; + input_report_key(ts->input_pen, BTN_STYLUS, key_value & 0x10); + input_report_key(ts->input_pen, BTN_STYLUS2, key_value & 0x20); + } else { + input_report_key(ts->input_pen, BTN_STYLUS, 0); + input_report_key(ts->input_pen, BTN_STYLUS2, 0); + } + + input_sync(ts->input_pen); +} + +static void goodix_ts_report_pen_up(struct goodix_ts_data *ts) +{ + if (!ts->input_pen) + return; + + input_report_key(ts->input_pen, BTN_TOUCH, 0); + input_report_key(ts->input_pen, BTN_TOOL_PEN, 0); + input_report_key(ts->input_pen, BTN_STYLUS, 0); + input_report_key(ts->input_pen, BTN_STYLUS2, 0); + + input_sync(ts->input_pen); +} + +static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data) +{ + int id = coor_data[0] & 0x0F; + int input_x = get_unaligned_le16(&coor_data[1]); + int input_y = get_unaligned_le16(&coor_data[3]); + int input_w = get_unaligned_le16(&coor_data[5]); + + input_mt_slot(ts->input_dev, id); + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); + touchscreen_report_pos(ts->input_dev, &ts->prop, + input_x, input_y, true); + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w); + input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); +} + +static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data) +{ + int id = coor_data[1] & 0x0F; + int input_x = get_unaligned_le16(&coor_data[3]); + int input_y = get_unaligned_le16(&coor_data[5]); + int input_w = get_unaligned_le16(&coor_data[7]); + + input_mt_slot(ts->input_dev, id); + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); + touchscreen_report_pos(ts->input_dev, &ts->prop, + input_x, input_y, true); + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w); + input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); +} + +static void goodix_ts_release_keys(struct goodix_ts_data *ts) +{ + int i; + + for (i = 0; i < GOODIX_MAX_KEYS; i++) + input_report_key(ts->input_dev, ts->keymap[i], 0); +} + +static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data) +{ + int touch_num; + u8 key_value; + int i; + + if (data[0] & GOODIX_HAVE_KEY) { + touch_num = data[0] & 0x0f; + key_value = data[1 + ts->contact_size * touch_num]; + for (i = 0; i < GOODIX_MAX_KEYS; i++) + if (key_value & BIT(i)) + input_report_key(ts->input_dev, + ts->keymap[i], 1); + } else { + goodix_ts_release_keys(ts); + } +} + +/** + * goodix_process_events - Process incoming events + * + * @ts: our goodix_ts_data pointer + * + * Called when the IRQ is triggered. Read the current device state, and push + * the input events to the user space. + */ +static void goodix_process_events(struct goodix_ts_data *ts) +{ + u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; + int touch_num; + int i; + + touch_num = goodix_ts_read_input_report(ts, point_data); + if (touch_num < 0) + return; + + /* The pen being down is always reported as a single touch */ + if (touch_num == 1 && (point_data[1] & 0x80)) { + goodix_ts_report_pen_down(ts, point_data); + goodix_ts_release_keys(ts); + goto sync; /* Release any previously registered touches */ + } else { + goodix_ts_report_pen_up(ts); + } + + goodix_ts_report_key(ts, point_data); + + for (i = 0; i < touch_num; i++) + if (ts->contact_size == 9) + goodix_ts_report_touch_9b(ts, + &point_data[1 + ts->contact_size * i]); + else + goodix_ts_report_touch_8b(ts, + &point_data[1 + ts->contact_size * i]); + +sync: + input_mt_sync_frame(ts->input_dev); + input_sync(ts->input_dev); +} + +/** + * goodix_ts_irq_handler - The IRQ handler + * + * @irq: interrupt number. + * @dev_id: private data pointer. + */ +static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) +{ + struct goodix_ts_data *ts = dev_id; + + goodix_process_events(ts); + goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0); + + return IRQ_HANDLED; +} + +static void goodix_free_irq(struct goodix_ts_data *ts) +{ + devm_free_irq(&ts->client->dev, ts->client->irq, ts); +} + +static int goodix_request_irq(struct goodix_ts_data *ts) +{ + return devm_request_threaded_irq(&ts->client->dev, ts->client->irq, + NULL, goodix_ts_irq_handler, + ts->irq_flags, ts->client->name, ts); +} + +static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len) +{ + int i, raw_cfg_len = len - 2; + u8 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i++) + check_sum += cfg[i]; + check_sum = (~check_sum) + 1; + if (check_sum != cfg[raw_cfg_len]) { + dev_err(&ts->client->dev, + "The checksum of the config fw is not correct"); + return -EINVAL; + } + + if (cfg[raw_cfg_len + 1] != 1) { + dev_err(&ts->client->dev, + "Config fw must have Config_Fresh register set"); + return -EINVAL; + } + + return 0; +} + +static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts) +{ + int i, raw_cfg_len = ts->chip->config_len - 2; + u8 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i++) + check_sum += ts->config[i]; + check_sum = (~check_sum) + 1; + + ts->config[raw_cfg_len] = check_sum; + ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */ +} + +static int goodix_check_cfg_16(struct goodix_ts_data *ts, const u8 *cfg, + int len) +{ + int i, raw_cfg_len = len - 3; + u16 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i += 2) + check_sum += get_unaligned_be16(&cfg[i]); + check_sum = (~check_sum) + 1; + if (check_sum != get_unaligned_be16(&cfg[raw_cfg_len])) { + dev_err(&ts->client->dev, + "The checksum of the config fw is not correct"); + return -EINVAL; + } + + if (cfg[raw_cfg_len + 2] != 1) { + dev_err(&ts->client->dev, + "Config fw must have Config_Fresh register set"); + return -EINVAL; + } + + return 0; +} + +static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts) +{ + int i, raw_cfg_len = ts->chip->config_len - 3; + u16 check_sum = 0; + + for (i = 0; i < raw_cfg_len; i += 2) + check_sum += get_unaligned_be16(&ts->config[i]); + check_sum = (~check_sum) + 1; + + put_unaligned_be16(check_sum, &ts->config[raw_cfg_len]); + ts->config[raw_cfg_len + 2] = 1; /* Set "config_fresh" bit */ +} + +/** + * goodix_check_cfg - Checks if config fw is valid + * + * @ts: goodix_ts_data pointer + * @cfg: firmware config data + * @len: config data length + */ +static int goodix_check_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len) +{ + if (len < GOODIX_CONFIG_MIN_LENGTH || + len > GOODIX_CONFIG_MAX_LENGTH) { + dev_err(&ts->client->dev, + "The length of the config fw is not correct"); + return -EINVAL; + } + + return ts->chip->check_config(ts, cfg, len); +} + +/** + * goodix_send_cfg - Write fw config to device + * + * @ts: goodix_ts_data pointer + * @cfg: config firmware to write to device + * @len: config data length + */ +int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len) +{ + int error; + + error = goodix_check_cfg(ts, cfg, len); + if (error) + return error; + + error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg, len); + if (error) + return error; + + dev_dbg(&ts->client->dev, "Config sent successfully."); + + /* Let the firmware reconfigure itself, so sleep for 10ms */ + usleep_range(10000, 11000); + + return 0; +} + +#ifdef ACPI_GPIO_SUPPORT +static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts) +{ + acpi_handle handle = ACPI_HANDLE(&ts->client->dev); + acpi_status status; + + status = acpi_evaluate_object(handle, "INTI", NULL, NULL); + return ACPI_SUCCESS(status) ? 0 : -EIO; +} + +static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value) +{ + acpi_handle handle = ACPI_HANDLE(&ts->client->dev); + acpi_status status; + + status = acpi_execute_simple_method(handle, "INTO", value); + return ACPI_SUCCESS(status) ? 0 : -EIO; +} +#else +static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts) +{ + dev_err(&ts->client->dev, + "%s called on device without ACPI support\n", __func__); + return -EINVAL; +} + +static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value) +{ + dev_err(&ts->client->dev, + "%s called on device without ACPI support\n", __func__); + return -EINVAL; +} +#endif + +static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value) +{ + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_NONE: + dev_err(&ts->client->dev, + "%s called without an irq_pin_access_method set\n", + __func__); + return -EINVAL; + case IRQ_PIN_ACCESS_GPIO: + return gpiod_direction_output(ts->gpiod_int, value); + case IRQ_PIN_ACCESS_ACPI_GPIO: + /* + * The IRQ pin triggers on a falling edge, so its gets marked + * as active-low, use output_raw to avoid the value inversion. + */ + return gpiod_direction_output_raw(ts->gpiod_int, value); + case IRQ_PIN_ACCESS_ACPI_METHOD: + return goodix_pin_acpi_output_method(ts, value); + } + + return -EINVAL; /* Never reached */ +} + +static int goodix_irq_direction_input(struct goodix_ts_data *ts) +{ + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_NONE: + dev_err(&ts->client->dev, + "%s called without an irq_pin_access_method set\n", + __func__); + return -EINVAL; + case IRQ_PIN_ACCESS_GPIO: + return gpiod_direction_input(ts->gpiod_int); + case IRQ_PIN_ACCESS_ACPI_GPIO: + return gpiod_direction_input(ts->gpiod_int); + case IRQ_PIN_ACCESS_ACPI_METHOD: + return goodix_pin_acpi_direction_input(ts); + } + + return -EINVAL; /* Never reached */ +} + +int goodix_int_sync(struct goodix_ts_data *ts) +{ + int error; + + error = goodix_irq_direction_output(ts, 0); + if (error) + goto error; + + msleep(50); /* T5: 50ms */ + + error = goodix_irq_direction_input(ts); + if (error) + goto error; + + return 0; + +error: + dev_err(&ts->client->dev, "Controller irq sync failed.\n"); + return error; +} + +/** + * goodix_reset_no_int_sync - Reset device, leaving interrupt line in output mode + * + * @ts: goodix_ts_data pointer + */ +int goodix_reset_no_int_sync(struct goodix_ts_data *ts) +{ + int error; + + /* begin select I2C slave addr */ + error = gpiod_direction_output(ts->gpiod_rst, 0); + if (error) + goto error; + + msleep(20); /* T2: > 10ms */ + + /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ + error = goodix_irq_direction_output(ts, ts->client->addr == 0x14); + if (error) + goto error; + + usleep_range(100, 2000); /* T3: > 100us */ + + error = gpiod_direction_output(ts->gpiod_rst, 1); + if (error) + goto error; + + usleep_range(6000, 10000); /* T4: > 5ms */ + + /* + * Put the reset pin back in to input / high-impedance mode to save + * power. Only do this in the non ACPI case since some ACPI boards + * don't have a pull-up, so there the reset pin must stay active-high. + */ + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { + error = gpiod_direction_input(ts->gpiod_rst); + if (error) + goto error; + } + + return 0; + +error: + dev_err(&ts->client->dev, "Controller reset failed.\n"); + return error; +} + +/** + * goodix_reset - Reset device during power on + * + * @ts: goodix_ts_data pointer + */ +static int goodix_reset(struct goodix_ts_data *ts) +{ + int error; + + error = goodix_reset_no_int_sync(ts); + if (error) + return error; + + return goodix_int_sync(ts); +} + +#ifdef ACPI_GPIO_SUPPORT +static const struct acpi_gpio_params first_gpio = { 0, 0, false }; +static const struct acpi_gpio_params second_gpio = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_goodix_int_first_gpios[] = { + { GOODIX_GPIO_INT_NAME "-gpios", &first_gpio, 1 }, + { GOODIX_GPIO_RST_NAME "-gpios", &second_gpio, 1 }, + { }, +}; + +static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = { + { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 }, + { GOODIX_GPIO_INT_NAME "-gpios", &second_gpio, 1 }, + { }, +}; + +static const struct acpi_gpio_mapping acpi_goodix_reset_only_gpios[] = { + { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 }, + { }, +}; + +static int goodix_resource(struct acpi_resource *ares, void *data) +{ + struct goodix_ts_data *ts = data; + struct device *dev = &ts->client->dev; + struct acpi_resource_gpio *gpio; + + if (acpi_gpio_get_irq_resource(ares, &gpio)) { + if (ts->gpio_int_idx == -1) { + ts->gpio_int_idx = ts->gpio_count; + } else { + dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n"); + ts->gpio_int_idx = -2; + } + ts->gpio_count++; + } else if (acpi_gpio_get_io_resource(ares, &gpio)) + ts->gpio_count++; + + return 0; +} + +/* + * This function gets called in case we fail to get the irq GPIO directly + * because the ACPI tables lack GPIO-name to APCI _CRS index mappings + * (no _DSD UUID daffd814-6eba-4d8c-8a91-bc9bbf4aa301 data). + * In that case we add our own mapping and then goodix_get_gpio_config() + * retries to get the GPIOs based on the added mapping. + */ +static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) +{ + const struct acpi_gpio_mapping *gpio_mapping = NULL; + struct device *dev = &ts->client->dev; + LIST_HEAD(resources); + int irq, ret; + + ts->gpio_count = 0; + ts->gpio_int_idx = -1; + ret = acpi_dev_get_resources(ACPI_COMPANION(dev), &resources, + goodix_resource, ts); + if (ret < 0) { + dev_err(dev, "Error getting ACPI resources: %d\n", ret); + return ret; + } + + acpi_dev_free_resource_list(&resources); + + /* + * CHT devices should have a GpioInt + a regular GPIO ACPI resource. + * Some CHT devices have a bug (where the also is bogus Interrupt + * resource copied from a previous BYT based generation). i2c-core-acpi + * will use the non-working Interrupt resource, fix this up. + */ + if (soc_intel_is_cht() && ts->gpio_count == 2 && ts->gpio_int_idx != -1) { + irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0); + if (irq > 0 && irq != ts->client->irq) { + dev_warn(dev, "Overriding IRQ %d -> %d\n", ts->client->irq, irq); + ts->client->irq = irq; + } + } + + if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_first_gpios; + } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == -1 && + acpi_has_method(ACPI_HANDLE(dev), "INTI") && + acpi_has_method(ACPI_HANDLE(dev), "INTO")) { + dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n"); + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD; + gpio_mapping = acpi_goodix_reset_only_gpios; + } else if (soc_intel_is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { + dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); + ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; + gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == 0) { + /* + * On newer devices there is only 1 GpioInt resource and _PS0 + * does the whole reset sequence for us. + */ + acpi_device_fix_up_power(ACPI_COMPANION(dev)); + + /* + * Before the _PS0 call the int GPIO may have been in output + * mode and the call should have put the int GPIO in input mode, + * but the GPIO subsys cached state may still think it is + * in output mode, causing gpiochip_lock_as_irq() failure. + * + * Add a mapping for the int GPIO to make the + * gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, + * which will explicitly set the direction to input. + */ + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + gpio_mapping = acpi_goodix_int_first_gpios; + } else { + dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n", + ts->gpio_count, ts->gpio_int_idx); + /* + * On some devices _PS0 does a reset for us and + * sometimes this is necessary for things to work. + */ + acpi_device_fix_up_power(ACPI_COMPANION(dev)); + return -EINVAL; + } + + /* + * Normally we put the reset pin in input / high-impedance mode to save + * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI + * case, leave the pin as is. This results in the pin not being touched + * at all on x86/ACPI boards, except when needed for error-recover. + */ + ts->gpiod_rst_flags = GPIOD_ASIS; + + return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); +} +#else +static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) +{ + return -EINVAL; +} +#endif /* CONFIG_X86 && CONFIG_ACPI */ + +/** + * goodix_get_gpio_config - Get GPIO config from ACPI/DT + * + * @ts: goodix_ts_data pointer + */ +static int goodix_get_gpio_config(struct goodix_ts_data *ts) +{ + int error; + struct device *dev; + struct gpio_desc *gpiod; + bool added_acpi_mappings = false; + + if (!ts->client) + return -EINVAL; + dev = &ts->client->dev; + + /* + * By default we request the reset pin as input, leaving it in + * high-impedance when not resetting the controller to save power. + */ + ts->gpiod_rst_flags = GPIOD_IN; + + ts->avdd28 = devm_regulator_get(dev, "AVDD28"); + if (IS_ERR(ts->avdd28)) { + error = PTR_ERR(ts->avdd28); + if (error != -EPROBE_DEFER) + dev_err(dev, + "Failed to get AVDD28 regulator: %d\n", error); + return error; + } + + ts->vddio = devm_regulator_get(dev, "VDDIO"); + if (IS_ERR(ts->vddio)) { + error = PTR_ERR(ts->vddio); + if (error != -EPROBE_DEFER) + dev_err(dev, + "Failed to get VDDIO regulator: %d\n", error); + return error; + } + +retry_get_irq_gpio: + /* Get the interrupt GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_INT_NAME, error); + return error; + } + if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) { + added_acpi_mappings = true; + if (goodix_add_acpi_gpio_mappings(ts) == 0) + goto retry_get_irq_gpio; + } + + ts->gpiod_int = gpiod; + + /* Get the reset line GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_RST_NAME, error); + return error; + } + + ts->gpiod_rst = gpiod; + + switch (ts->irq_pin_access_method) { + case IRQ_PIN_ACCESS_ACPI_GPIO: + /* + * We end up here if goodix_add_acpi_gpio_mappings() has + * called devm_acpi_dev_add_driver_gpios() because the ACPI + * tables did not contain name to index mappings. + * Check that we successfully got both GPIOs after we've + * added our own acpi_gpio_mapping and if we did not get both + * GPIOs reset irq_pin_access_method to IRQ_PIN_ACCESS_NONE. + */ + if (!ts->gpiod_int || !ts->gpiod_rst) + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + break; + case IRQ_PIN_ACCESS_ACPI_METHOD: + if (!ts->gpiod_rst) + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + break; + default: + if (ts->gpiod_int && ts->gpiod_rst) { + ts->reset_controller_at_probe = true; + ts->load_cfg_from_disk = true; + ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO; + } + } + + return 0; +} + +/** + * goodix_read_config - Read the embedded configuration of the panel + * + * @ts: our goodix_ts_data pointer + * + * Must be called during probe + */ +static void goodix_read_config(struct goodix_ts_data *ts) +{ + int x_max, y_max; + int error; + + /* + * On controllers where we need to upload the firmware + * (controllers without flash) ts->config already has the config + * at this point and the controller itself does not have it yet! + */ + if (!ts->firmware_name) { + error = goodix_i2c_read(ts->client, ts->chip->config_addr, + ts->config, ts->chip->config_len); + if (error) { + ts->int_trigger_type = GOODIX_INT_TRIGGER; + ts->max_touch_num = GOODIX_MAX_CONTACTS; + return; + } + } + + ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03; + ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; + + x_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC]); + y_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC + 2]); + if (x_max && y_max) { + input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1); + input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1); + } + + ts->chip->calc_config_checksum(ts); +} + +/** + * goodix_read_version - Read goodix touchscreen version + * + * @ts: our goodix_ts_data pointer + */ +static int goodix_read_version(struct goodix_ts_data *ts) +{ + int error; + u8 buf[6]; + char id_str[GOODIX_ID_MAX_LEN + 1]; + + error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf)); + if (error) + return error; + + memcpy(id_str, buf, GOODIX_ID_MAX_LEN); + id_str[GOODIX_ID_MAX_LEN] = 0; + strscpy(ts->id, id_str, GOODIX_ID_MAX_LEN + 1); + + ts->version = get_unaligned_le16(&buf[4]); + + dev_info(&ts->client->dev, "ID %s, version: %04x\n", ts->id, + ts->version); + + return 0; +} + +/** + * goodix_i2c_test - I2C test function to check if the device answers. + * + * @client: the i2c client + */ +static int goodix_i2c_test(struct i2c_client *client) +{ + int retry = 0; + int error; + u8 test; + + while (retry++ < 2) { + error = goodix_i2c_read(client, GOODIX_REG_ID, &test, 1); + if (!error) + return 0; + + msleep(20); + } + + return error; +} + +/** + * goodix_configure_dev - Finish device initialization + * + * @ts: our goodix_ts_data pointer + * + * Must be called from probe to finish initialization of the device. + * Contains the common initialization code for both devices that + * declare gpio pins and devices that do not. It is either called + * directly from probe or from request_firmware_wait callback. + */ +static int goodix_configure_dev(struct goodix_ts_data *ts) +{ + int error; + int i; + + ts->int_trigger_type = GOODIX_INT_TRIGGER; + ts->max_touch_num = GOODIX_MAX_CONTACTS; + + ts->input_dev = devm_input_allocate_device(&ts->client->dev); + if (!ts->input_dev) { + dev_err(&ts->client->dev, "Failed to allocate input device."); + return -ENOMEM; + } + + ts->input_dev->name = "Goodix Capacitive TouchScreen"; + ts->input_dev->phys = "input/ts"; + ts->input_dev->id.bustype = BUS_I2C; + ts->input_dev->id.vendor = 0x0416; + if (kstrtou16(ts->id, 10, &ts->input_dev->id.product)) + ts->input_dev->id.product = 0x1001; + ts->input_dev->id.version = ts->version; + + ts->input_dev->keycode = ts->keymap; + ts->input_dev->keycodesize = sizeof(ts->keymap[0]); + ts->input_dev->keycodemax = GOODIX_MAX_KEYS; + + /* Capacitive Windows/Home button on some devices */ + for (i = 0; i < GOODIX_MAX_KEYS; ++i) { + if (i == 0) + ts->keymap[i] = KEY_LEFTMETA; + else + ts->keymap[i] = KEY_F1 + (i - 1); + + input_set_capability(ts->input_dev, EV_KEY, ts->keymap[i]); + } + + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y); + input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + +retry_read_config: + /* Read configuration and apply touchscreen parameters */ + goodix_read_config(ts); + + /* Try overriding touchscreen parameters via device properties */ + touchscreen_parse_properties(ts->input_dev, true, &ts->prop); + + if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) { + if (!ts->reset_controller_at_probe && + ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) { + dev_info(&ts->client->dev, "Config not set, resetting controller\n"); + /* Retry after a controller reset */ + ts->reset_controller_at_probe = true; + error = goodix_reset(ts); + if (error) + return error; + goto retry_read_config; + } + dev_err(&ts->client->dev, + "Invalid config (%d, %d, %d), using defaults\n", + ts->prop.max_x, ts->prop.max_y, ts->max_touch_num); + ts->prop.max_x = GOODIX_MAX_WIDTH - 1; + ts->prop.max_y = GOODIX_MAX_HEIGHT - 1; + ts->max_touch_num = GOODIX_MAX_CONTACTS; + input_abs_set_max(ts->input_dev, + ABS_MT_POSITION_X, ts->prop.max_x); + input_abs_set_max(ts->input_dev, + ABS_MT_POSITION_Y, ts->prop.max_y); + } + + if (dmi_check_system(nine_bytes_report)) { + ts->contact_size = 9; + + dev_dbg(&ts->client->dev, + "Non-standard 9-bytes report format quirk\n"); + } + + if (dmi_check_system(inverted_x_screen)) { + ts->prop.invert_x = true; + dev_dbg(&ts->client->dev, + "Applying 'inverted x screen' quirk\n"); + } + + error = input_mt_init_slots(ts->input_dev, ts->max_touch_num, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(&ts->client->dev, + "Failed to initialize MT slots: %d", error); + return error; + } + + error = input_register_device(ts->input_dev); + if (error) { + dev_err(&ts->client->dev, + "Failed to register input device: %d", error); + return error; + } + + /* + * Create the input_pen device before goodix_request_irq() calls + * devm_request_threaded_irq() so that the devm framework frees + * it after disabling the irq. + * Unfortunately there is no way to detect if the touchscreen has pen + * support, so registering the dev is delayed till the first pen event. + */ + error = goodix_create_pen_input(ts); + if (error) + return error; + + ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; + error = goodix_request_irq(ts); + if (error) { + dev_err(&ts->client->dev, "request IRQ failed: %d\n", error); + return error; + } + + return 0; +} + +/** + * goodix_config_cb - Callback to finish device init + * + * @cfg: firmware config + * @ctx: our goodix_ts_data pointer + * + * request_firmware_wait callback that finishes + * initialization of the device. + */ +static void goodix_config_cb(const struct firmware *cfg, void *ctx) +{ + struct goodix_ts_data *ts = ctx; + int error; + + if (ts->firmware_name) { + if (!cfg) + goto err_release_cfg; + + error = goodix_check_cfg(ts, cfg->data, cfg->size); + if (error) + goto err_release_cfg; + + memcpy(ts->config, cfg->data, cfg->size); + } else if (cfg) { + /* send device configuration to the firmware */ + error = goodix_send_cfg(ts, cfg->data, cfg->size); + if (error) + goto err_release_cfg; + } + + goodix_configure_dev(ts); + +err_release_cfg: + release_firmware(cfg); + complete_all(&ts->firmware_loading_complete); +} + +static void goodix_disable_regulators(void *arg) +{ + struct goodix_ts_data *ts = arg; + + regulator_disable(ts->vddio); + regulator_disable(ts->avdd28); +} + +static int goodix_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct goodix_ts_data *ts; + const char *cfg_name; + int error; + + dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C check functionality failed.\n"); + return -ENXIO; + } + + ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ts->client = client; + i2c_set_clientdata(client, ts); + init_completion(&ts->firmware_loading_complete); + ts->contact_size = GOODIX_CONTACT_SIZE; + + error = goodix_get_gpio_config(ts); + if (error) + return error; + + /* power up the controller */ + error = regulator_enable(ts->avdd28); + if (error) { + dev_err(&client->dev, + "Failed to enable AVDD28 regulator: %d\n", + error); + return error; + } + + error = regulator_enable(ts->vddio); + if (error) { + dev_err(&client->dev, + "Failed to enable VDDIO regulator: %d\n", + error); + regulator_disable(ts->avdd28); + return error; + } + + error = devm_add_action_or_reset(&client->dev, + goodix_disable_regulators, ts); + if (error) + return error; + +reset: + if (ts->reset_controller_at_probe) { + /* reset the controller */ + error = goodix_reset(ts); + if (error) + return error; + } + + error = goodix_i2c_test(client); + if (error) { + if (!ts->reset_controller_at_probe && + ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) { + /* Retry after a controller reset */ + ts->reset_controller_at_probe = true; + goto reset; + } + dev_err(&client->dev, "I2C communication failure: %d\n", error); + return error; + } + + error = goodix_firmware_check(ts); + if (error) + return error; + + error = goodix_read_version(ts); + if (error) + return error; + + ts->chip = goodix_get_chip_data(ts->id); + + if (ts->load_cfg_from_disk) { + /* update device config */ + error = device_property_read_string(&client->dev, + "goodix,config-name", + &cfg_name); + if (!error) + snprintf(ts->cfg_name, sizeof(ts->cfg_name), + "goodix/%s", cfg_name); + else + snprintf(ts->cfg_name, sizeof(ts->cfg_name), + "goodix_%s_cfg.bin", ts->id); + + error = request_firmware_nowait(THIS_MODULE, true, ts->cfg_name, + &client->dev, GFP_KERNEL, ts, + goodix_config_cb); + if (error) { + dev_err(&client->dev, + "Failed to invoke firmware loader: %d\n", + error); + return error; + } + + return 0; + } else { + error = goodix_configure_dev(ts); + if (error) + return error; + } + + return 0; +} + +static void goodix_ts_remove(struct i2c_client *client) +{ + struct goodix_ts_data *ts = i2c_get_clientdata(client); + + if (ts->load_cfg_from_disk) + wait_for_completion(&ts->firmware_loading_complete); +} + +static int __maybe_unused goodix_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct goodix_ts_data *ts = i2c_get_clientdata(client); + int error; + + if (ts->load_cfg_from_disk) + wait_for_completion(&ts->firmware_loading_complete); + + /* We need gpio pins to suspend/resume */ + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { + disable_irq(client->irq); + return 0; + } + + /* Free IRQ as IRQ pin is used as output in the suspend sequence */ + goodix_free_irq(ts); + + /* Save reference (calibration) info if necessary */ + goodix_save_bak_ref(ts); + + /* Output LOW on the INT pin for 5 ms */ + error = goodix_irq_direction_output(ts, 0); + if (error) { + goodix_request_irq(ts); + return error; + } + + usleep_range(5000, 6000); + + error = goodix_i2c_write_u8(ts->client, GOODIX_REG_COMMAND, + GOODIX_CMD_SCREEN_OFF); + if (error) { + goodix_irq_direction_input(ts); + goodix_request_irq(ts); + return -EAGAIN; + } + + /* + * The datasheet specifies that the interval between sending screen-off + * command and wake-up should be longer than 58 ms. To avoid waking up + * sooner, delay 58ms here. + */ + msleep(58); + return 0; +} + +static int __maybe_unused goodix_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct goodix_ts_data *ts = i2c_get_clientdata(client); + u8 config_ver; + int error; + + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { + enable_irq(client->irq); + return 0; + } + + /* + * Exit sleep mode by outputting HIGH level to INT pin + * for 2ms~5ms. + */ + error = goodix_irq_direction_output(ts, 1); + if (error) + return error; + + usleep_range(2000, 5000); + + error = goodix_int_sync(ts); + if (error) + return error; + + error = goodix_i2c_read(ts->client, ts->chip->config_addr, + &config_ver, 1); + if (!error && config_ver != ts->config[0]) + dev_info(dev, "Config version mismatch %d != %d, resetting controller\n", + config_ver, ts->config[0]); + + if (error != 0 || config_ver != ts->config[0]) { + error = goodix_reset(ts); + if (error) + return error; + + error = goodix_send_cfg(ts, ts->config, ts->chip->config_len); + if (error) + return error; + } + + error = goodix_request_irq(ts); + if (error) + return error; + + return 0; +} + +static SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume); + +static const struct i2c_device_id goodix_ts_id[] = { + { "GDIX1001:00", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, goodix_ts_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id goodix_acpi_match[] = { + { "GDIX1001", 0 }, + { "GDIX1002", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id goodix_of_match[] = { + { .compatible = "goodix,gt1151" }, + { .compatible = "goodix,gt1158" }, + { .compatible = "goodix,gt5663" }, + { .compatible = "goodix,gt5688" }, + { .compatible = "goodix,gt911" }, + { .compatible = "goodix,gt9110" }, + { .compatible = "goodix,gt912" }, + { .compatible = "goodix,gt9147" }, + { .compatible = "goodix,gt917s" }, + { .compatible = "goodix,gt927" }, + { .compatible = "goodix,gt9271" }, + { .compatible = "goodix,gt928" }, + { .compatible = "goodix,gt9286" }, + { .compatible = "goodix,gt967" }, + { } +}; +MODULE_DEVICE_TABLE(of, goodix_of_match); +#endif + +static struct i2c_driver goodix_ts_driver = { + .probe = goodix_ts_probe, + .remove = goodix_ts_remove, + .id_table = goodix_ts_id, + .driver = { + .name = "Goodix-TS", + .acpi_match_table = ACPI_PTR(goodix_acpi_match), + .of_match_table = of_match_ptr(goodix_of_match), + .pm = &goodix_pm_ops, + }, +}; +module_i2c_driver(goodix_ts_driver); + +MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>"); +MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>"); +MODULE_DESCRIPTION("Goodix touchscreen driver"); +MODULE_LICENSE("GPL v2"); |