diff options
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/mmci_stm32_sdmmc.c | 24 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-o2micro.c | 30 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-xenon-phy.c | 48 |
3 files changed, 93 insertions, 9 deletions
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index 60bca78a7..0511583ff 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -200,6 +200,8 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl) struct scatterlist *sg; int i; + host->dma_in_progress = true; + if (!host->variant->dma_lli || data->sg_len == 1 || idma->use_bounce_buffer) { u32 dma_addr; @@ -238,9 +240,30 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl) return 0; } +static void sdmmc_idma_error(struct mmci_host *host) +{ + struct mmc_data *data = host->data; + struct sdmmc_idma *idma = host->dma_priv; + + if (!dma_inprogress(host)) + return; + + writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR); + host->dma_in_progress = false; + data->host_cookie = 0; + + if (!idma->use_bounce_buffer) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + mmc_get_dma_dir(data)); +} + static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data) { + if (!dma_inprogress(host)) + return; + writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR); + host->dma_in_progress = false; if (!data->host_cookie) sdmmc_idma_unprep_data(host, data, 0); @@ -567,6 +590,7 @@ static struct mmci_host_ops sdmmc_variant_ops = { .dma_setup = sdmmc_idma_setup, .dma_start = sdmmc_idma_start, .dma_finalize = sdmmc_idma_finalize, + .dma_error = sdmmc_idma_error, .set_clkreg = mmci_sdmmc_set_clkreg, .set_pwrreg = mmci_sdmmc_set_pwrreg, .busy_complete = sdmmc_busy_complete, diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index bca1d095b..24bb0e980 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -602,6 +602,35 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_o2_enable_clk(host, clk); } +static void sdhci_pci_o2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd) +{ + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot = sdhci_priv(host); + u32 scratch_32 = 0; + u8 scratch_8 = 0; + + chip = slot->chip; + + if (mode == MMC_POWER_OFF) { + /* UnLock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); + scratch_8 &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + + /* Set PCR 0x354[16] to switch Clock Source back to OPE Clock */ + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32); + scratch_32 &= ~(O2_SD_SEL_DLL); + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32); + + /* Lock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); + scratch_8 |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + } + + sdhci_set_power(host, mode, vdd); +} + static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) { struct sdhci_pci_chip *chip; @@ -911,6 +940,7 @@ static const struct sdhci_ops sdhci_pci_o2_ops = { .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_power = sdhci_pci_o2_set_power, }; const struct sdhci_pci_fixes sdhci_o2 = { diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c index 8cf3a375d..cc9d28b75 100644 --- a/drivers/mmc/host/sdhci-xenon-phy.c +++ b/drivers/mmc/host/sdhci-xenon-phy.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/ktime.h> +#include <linux/iopoll.h> #include <linux/of_address.h> #include "sdhci-pltfm.h" @@ -109,6 +110,8 @@ #define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST (XENON_EMMC_PHY_REG_BASE + 0x18) #define XENON_LOGIC_TIMING_VALUE 0x00AA8977 +#define XENON_MAX_PHY_TIMEOUT_LOOPS 100 + /* * List offset of PHY registers and some special register values * in eMMC PHY 5.0 or eMMC PHY 5.1 @@ -216,6 +219,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host) return 0; } +static int xenon_check_stability_internal_clk(struct sdhci_host *host) +{ + u32 reg; + int err; + + err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE, + 1100, 20000, false, host, SDHCI_CLOCK_CONTROL); + if (err) + dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n"); + + return err; +} + /* * eMMC 5.0/5.1 PHY init/re-init. * eMMC PHY init should be executed after: @@ -232,6 +248,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host) struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs; + int ret = xenon_check_stability_internal_clk(host); + + if (ret) + return ret; + reg = sdhci_readl(host, phy_regs->timing_adj); reg |= XENON_PHY_INITIALIZAION; sdhci_writel(host, reg, phy_regs->timing_adj); @@ -259,18 +280,27 @@ static int xenon_emmc_phy_init(struct sdhci_host *host) /* get the wait time */ wait /= clock; wait++; - /* wait for host eMMC PHY init completes */ - udelay(wait); - reg = sdhci_readl(host, phy_regs->timing_adj); - reg &= XENON_PHY_INITIALIZAION; - if (reg) { + /* + * AC5X spec says bit must be polled until zero. + * We see cases in which timeout can take longer + * than the standard calculation on AC5X, which is + * expected following the spec comment above. + * According to the spec, we must wait as long as + * it takes for that bit to toggle on AC5X. + * Cap that with 100 delay loops so we won't get + * stuck here forever: + */ + + ret = read_poll_timeout(sdhci_readl, reg, + !(reg & XENON_PHY_INITIALIZAION), + wait, XENON_MAX_PHY_TIMEOUT_LOOPS * wait, + false, host, phy_regs->timing_adj); + if (ret) dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n", - wait); - return -ETIMEDOUT; - } + wait * XENON_MAX_PHY_TIMEOUT_LOOPS); - return 0; + return ret; } #define ARMADA_3700_SOC_PAD_1_8V 0x1 |