diff options
Diffstat (limited to 'drivers/mtd/nand/raw/Kconfig')
| -rw-r--r-- | drivers/mtd/nand/raw/Kconfig | 560 |
1 files changed, 560 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig new file mode 100644 index 000000000..4cd40af36 --- /dev/null +++ b/drivers/mtd/nand/raw/Kconfig @@ -0,0 +1,560 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig MTD_RAW_NAND + tristate "Raw/Parallel NAND Device Support" + select MTD_NAND_CORE + select MTD_NAND_ECC + help + This enables support for accessing all type of raw/parallel + NAND flash devices. For further information see + <http://www.linux-mtd.infradead.org/doc/nand.html>. + +if MTD_RAW_NAND + +comment "Raw/parallel NAND flash controllers" + +config MTD_NAND_DENALI + tristate + +config MTD_NAND_DENALI_PCI + tristate "Denali NAND controller on Intel Moorestown" + select MTD_NAND_DENALI + depends on PCI + help + Enable the driver for NAND flash on Intel Moorestown, using the + Denali NAND controller core. + +config MTD_NAND_DENALI_DT + tristate "Denali NAND controller as a DT device" + select MTD_NAND_DENALI + depends on HAS_DMA && HAVE_CLK && OF && HAS_IOMEM + help + Enable the driver for NAND flash on platforms using a Denali NAND + controller as a DT device. + +config MTD_NAND_AMS_DELTA + tristate "Amstrad E3 NAND controller" + depends on MACH_AMS_DELTA || COMPILE_TEST + default y + help + Support for NAND flash on Amstrad E3 (Delta). + +config MTD_NAND_OMAP2 + tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller" + depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + depends on HAS_IOMEM + depends on OMAP_GPMC + help + Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 + and Keystone platforms. + +config MTD_NAND_OMAP_BCH + depends on MTD_NAND_OMAP2 + bool "Support hardware based BCH error correction" + default n + select BCH + help + This config enables the ELM hardware engine, which can be used to + locate and correct errors when using BCH ECC scheme. This offloads + the cpu from doing ECC error searching and correction. However some + legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine + so this is optional for them. + +config MTD_NAND_OMAP_BCH_BUILD + def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH + +config MTD_NAND_AU1550 + tristate "Au1550/1200 NAND support" + depends on MIPS_ALCHEMY + help + This enables the driver for the NAND flash controller on the + AMD/Alchemy 1550 SOC. + +config MTD_NAND_NDFC + tristate "IBM/MCC 4xx NAND controller" + depends on 4xx + select MTD_NAND_ECC_SW_HAMMING + select MTD_NAND_ECC_SW_HAMMING_SMC + help + NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs + +config MTD_NAND_S3C2410 + tristate "Samsung S3C NAND controller" + depends on ARCH_S3C24XX || ARCH_S3C64XX + help + This enables the NAND flash controller on the S3C24xx and S3C64xx + SoCs + + No board specific support is done by this driver, each board + must advertise a platform_device for the driver to attach. + +config MTD_NAND_S3C2410_DEBUG + bool "Samsung S3C NAND controller debug" + depends on MTD_NAND_S3C2410 + help + Enable debugging of the S3C NAND driver + +config MTD_NAND_S3C2410_CLKSTOP + bool "Samsung S3C NAND IDLE clock stop" + depends on MTD_NAND_S3C2410 + default n + help + Stop the clock to the NAND controller when there is no chip + selected to save power. This will mean there is a small delay + when the is NAND chip selected or released, but will save + approximately 5mA of power when there is nothing happening. + +config MTD_NAND_SHARPSL + tristate "Sharp SL Series (C7xx + others) NAND controller" + depends on ARCH_PXA || COMPILE_TEST + depends on HAS_IOMEM + +config MTD_NAND_CAFE + tristate "OLPC CAFÉ NAND controller" + depends on PCI + select REED_SOLOMON + select REED_SOLOMON_DEC16 + help + Use NAND flash attached to the CAFÉ chip designed for the OLPC + laptop. + +config MTD_NAND_CS553X + tristate "CS5535/CS5536 (AMD Geode companion) NAND controller" + depends on X86_32 + depends on !UML && HAS_IOMEM + help + The CS553x companion chips for the AMD Geode processor + include NAND flash controllers with built-in hardware ECC + capabilities; enabling this option will allow you to use + these. The driver will check the MSRs to verify that the + controller is enabled for NAND, and currently requires that + the controller be in MMIO mode. + + If you say "m", the module will be called cs553x_nand. + +config MTD_NAND_ATMEL + tristate "Atmel AT91 NAND Flash/SmartMedia NAND controller" + depends on ARCH_AT91 || COMPILE_TEST + depends on HAS_IOMEM + select GENERIC_ALLOCATOR + select MFD_ATMEL_SMC + help + Enables support for NAND Flash / Smart Media Card interface + on Atmel AT91 processors. + +config MTD_NAND_ORION + tristate "Marvell Orion NAND controller" + depends on PLAT_ORION + help + This enables the NAND flash controller on Orion machines. + + No board specific support is done by this driver, each board + must advertise a platform_device for the driver to attach. + +config MTD_NAND_MARVELL + tristate "Marvell EBU NAND controller" + depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \ + COMPILE_TEST + depends on HAS_IOMEM + help + This enables the NAND flash controller driver for Marvell boards, + including: + - PXA3xx processors (NFCv1) + - 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2) + - 64-bit Aramda platforms (7k, 8k) (NFCv2) + +config MTD_NAND_SLC_LPC32XX + tristate "NXP LPC32xx SLC NAND controller" + depends on ARCH_LPC32XX || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell + chips) NAND controller. This is the default for the PHYTEC 3250 + reference board which contains a NAND256R3A2CZA6 chip. + + Please check the actual NAND chip connected and its support + by the SLC NAND controller. + +config MTD_NAND_MLC_LPC32XX + tristate "NXP LPC32xx MLC NAND controller" + depends on ARCH_LPC32XX || COMPILE_TEST + depends on HAS_IOMEM + help + Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND + controller. This is the default for the WORK92105 controller + board. + + Please check the actual NAND chip connected and its support + by the MLC NAND controller. + +config MTD_NAND_PASEMI + tristate "PA Semi PWRficient NAND controller" + depends on PPC_PASEMI + help + Enables support for NAND Flash interface on PA Semi PWRficient + based boards + +config MTD_NAND_TMIO + tristate "Toshiba Mobile IO NAND controller" + depends on MFD_TMIO + help + Support for NAND flash connected to a Toshiba Mobile IO + Controller in some PDAs, including the Sharp SL6000x. + +source "drivers/mtd/nand/raw/brcmnand/Kconfig" + +config MTD_NAND_BCM47XXNFLASH + tristate "BCM4706 BCMA NAND controller" + depends on BCMA_NFLASH + depends on BCMA + help + BCMA bus can have various flash memories attached, they are + registered by bcma as platform devices. This enables driver for + NAND flash memories. For now only BCM4706 is supported. + +config MTD_NAND_OXNAS + tristate "Oxford Semiconductor NAND controller" + depends on ARCH_OXNAS || COMPILE_TEST + depends on HAS_IOMEM + help + This enables the NAND flash controller on Oxford Semiconductor SoCs. + +config MTD_NAND_MPC5121_NFC + tristate "MPC5121 NAND controller" + depends on PPC_MPC512x + help + This enables the driver for the NAND flash controller on the + MPC5121 SoC. + +config MTD_NAND_GPMI_NAND + tristate "Freescale GPMI NAND controller" + depends on MXS_DMA + help + Enables NAND Flash support for IMX23, IMX28 or IMX6. + The GPMI controller is very powerful, with the help of BCH + module, it can do the hardware ECC. The GPMI supports several + NAND flashs at the same time. + +config MTD_NAND_FSL_ELBC + tristate "Freescale eLBC NAND controller" + depends on FSL_SOC + select FSL_LBC + help + Various Freescale chips, including the 8313, include a NAND Flash + Controller Module with built-in hardware ECC capabilities. + Enabling this option will enable you to use this to control + external NAND devices. + +config MTD_NAND_FSL_IFC + tristate "Freescale IFC NAND controller" + depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST + depends on HAS_IOMEM + select FSL_IFC + select MEMORY + help + Various Freescale chips e.g P1010, include a NAND Flash machine + with built-in hardware ECC capabilities. + Enabling this option will enable you to use this to control + external NAND devices. + +config MTD_NAND_FSL_UPM + tristate "Freescale UPM NAND controller" + depends on PPC_83xx || PPC_85xx + select FSL_LBC + help + Enables support for NAND Flash chips wired onto Freescale PowerPC + processor localbus with User-Programmable Machine support. + +config MTD_NAND_VF610_NFC + tristate "Freescale VF610/MPC5125 NAND controller" + depends on (SOC_VF610 || COMPILE_TEST) + depends on HAS_IOMEM + help + Enables support for NAND Flash Controller on some Freescale + processors like the VF610, MPC5125, MCF54418 or Kinetis K70. + The driver supports a maximum 2k page size. With 2k pages and + 64 bytes or more of OOB, hardware ECC with up to 32-bit error + correction is supported. Hardware ECC is only enabled through + device tree. + +config MTD_NAND_MXC + tristate "Freescale MXC NAND controller" + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM && OF + help + This enables the driver for the NAND flash controller on the + MXC processors. + +config MTD_NAND_SH_FLCTL + tristate "Renesas SuperH FLCTL NAND controller" + depends on SUPERH || COMPILE_TEST + depends on HAS_IOMEM + help + Several Renesas SuperH CPU has FLCTL. This option enables support + for NAND Flash using FLCTL. + +config MTD_NAND_DAVINCI + tristate "DaVinci/Keystone NAND controller" + depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST + depends on HAS_IOMEM + help + Enable the driver for NAND flash chips on Texas Instruments + DaVinci/Keystone processors. + +config MTD_NAND_TXX9NDFMC + tristate "TXx9 NAND controller" + depends on SOC_TX4938 || COMPILE_TEST + depends on HAS_IOMEM + help + This enables the NAND flash controller on the TXx9 SoCs. + +config MTD_NAND_SOCRATES + tristate "Socrates NAND controller" + depends on SOCRATES + help + Enables support for NAND Flash chips wired onto Socrates board. + +source "drivers/mtd/nand/raw/ingenic/Kconfig" + +config MTD_NAND_FSMC + tristate "ST Micros FSMC NAND controller" + depends on OF && HAS_IOMEM + depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST + help + Enables support for NAND Flash chips on the ST Microelectronics + Flexible Static Memory Controller (FSMC) + +config MTD_NAND_XWAY + bool "Lantiq XWAY NAND controller" + depends on LANTIQ && SOC_TYPE_XWAY + help + Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + to the External Bus Unit (EBU). + +config MTD_NAND_SUNXI + tristate "Allwinner NAND controller" + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NAND Flash chips on Allwinner SoCs. + +config MTD_NAND_HISI504 + tristate "Hisilicon Hip04 NAND controller" + depends on ARCH_HISI || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NAND controller on Hisilicon SoC Hip04. + +config MTD_NAND_QCOM + tristate "QCOM NAND controller" + depends on ARCH_QCOM || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NAND flash chips on SoCs containing the EBI2 NAND + controller. This controller is found on IPQ806x SoC. + +config MTD_NAND_MTK + tristate "MTK NAND controller" + depends on MTD_NAND_ECC_MEDIATEK + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NAND controller on MTK SoCs. + This controller is found on mt27xx, mt81xx, mt65xx SoCs. + +config MTD_NAND_MXIC + tristate "Macronix raw NAND controller" + depends on HAS_IOMEM || COMPILE_TEST + help + This selects the Macronix raw NAND controller driver. + +config MTD_NAND_TEGRA + tristate "NVIDIA Tegra NAND controller" + depends on ARCH_TEGRA || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NAND flash controller on NVIDIA Tegra SoC. + The driver has been developed and tested on a Tegra 2 SoC. DMA + support, raw read/write page as well as HW ECC read/write page + is supported. Extra OOB bytes when using HW ECC are currently + not supported. + +config MTD_NAND_STM32_FMC2 + tristate "Support for NAND controller on STM32MP SoCs" + depends on MACH_STM32MP157 || COMPILE_TEST + select MFD_SYSCON + help + Enables support for NAND Flash chips on SoCs containing the FMC2 + NAND controller. This controller is found on STM32MP SoCs. + The controller supports a maximum 8k page size and supports + a maximum 8-bit correction error per sector of 512 bytes. + +config MTD_NAND_MESON + tristate "Support for NAND controller on Amlogic's Meson SoCs" + depends on COMMON_CLK && (ARCH_MESON || COMPILE_TEST) + select MFD_SYSCON + help + Enables support for NAND controller on Amlogic's Meson SoCs. + This controller is found on Meson SoCs. + +config MTD_NAND_GPIO + tristate "GPIO assisted NAND controller" + depends on GPIOLIB || COMPILE_TEST + depends on HAS_IOMEM + help + This enables a NAND flash driver where control signals are + connected to GPIO pins, and commands and data are communicated + via a memory mapped interface. + +config MTD_NAND_PLATFORM + tristate "Generic NAND controller" + depends on HAS_IOMEM + help + This implements a generic NAND driver for on-SOC platform + devices. You will need to provide platform-specific functions + via platform_data. + +config MTD_NAND_CADENCE + tristate "Support Cadence NAND (HPNFC) controller" + depends on (OF || COMPILE_TEST) && HAS_IOMEM + help + Enable the driver for NAND flash on platforms using a Cadence NAND + controller. + +config MTD_NAND_ARASAN + tristate "Support for Arasan NAND flash controller" + depends on HAS_IOMEM && HAS_DMA + select BCH + help + Enables the driver for the Arasan NAND flash controller on + Zynq Ultrascale+ MPSoC. + +config MTD_NAND_INTEL_LGM + tristate "Support for NAND controller on Intel LGM SoC" + depends on OF || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NAND Flash chips on Intel's LGM SoC. + NAND flash controller interfaced through the External Bus Unit. + +config MTD_NAND_ROCKCHIP + tristate "Rockchip NAND controller" + depends on ARCH_ROCKCHIP && HAS_IOMEM + help + Enables support for NAND controller on Rockchip SoCs. + There are four different versions of NAND FLASH Controllers, + including: + NFC v600: RK2928, RK3066, RK3188 + NFC v622: RK3036, RK3128 + NFC v800: RK3308, RV1108 + NFC v900: PX30, RK3326 + +config MTD_NAND_PL35X + tristate "ARM PL35X NAND controller" + depends on OF || COMPILE_TEST + depends on PL353_SMC + help + Enables support for PrimeCell SMC PL351 and PL353 NAND + controller found on Zynq7000. + +config MTD_NAND_RENESAS + tristate "Renesas R-Car Gen3 & RZ/N1 NAND controller" + depends on ARCH_RENESAS || COMPILE_TEST + help + Enables support for the NAND controller found on Renesas R-Car + Gen3 and RZ/N1 SoC families. + +comment "Misc" + +config MTD_SM_COMMON + tristate + default n + +config MTD_NAND_NANDSIM + tristate "Support for NAND Flash Simulator" + help + The simulator may simulate various NAND flash chips for the + MTD nand layer. + +config MTD_NAND_RICOH + tristate "Ricoh xD card reader" + default n + depends on PCI + select MTD_SM_COMMON + help + Enable support for Ricoh R5C852 xD card reader + You also need to enable either + NAND SSFDC (SmartMedia) read only translation layer' or new + experimental, readwrite + 'SmartMedia/xD new translation layer' + +config MTD_NAND_DISKONCHIP + tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)" + depends on HAS_IOMEM + select REED_SOLOMON + select REED_SOLOMON_DEC16 + help + This is a reimplementation of M-Systems DiskOnChip 2000, + Millennium and Millennium Plus as a standard NAND device driver, + as opposed to the earlier self-contained MTD device drivers. + This should enable, among other things, proper JFFS2 operation on + these devices. + +config MTD_NAND_DISKONCHIP_PROBE_ADVANCED + bool "Advanced detection options for DiskOnChip" + depends on MTD_NAND_DISKONCHIP + help + This option allows you to specify nonstandard address at which to + probe for a DiskOnChip, or to change the detection options. You + are unlikely to need any of this unless you are using LinuxBIOS. + Say 'N'. + +config MTD_NAND_DISKONCHIP_PROBE_ADDRESS + hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED + depends on MTD_NAND_DISKONCHIP + default "0" + help + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option allows you to specify a single address at which to probe + for the device, which is useful if you have other devices in that + range which get upset when they are probed. + + (Note that on PowerPC, the normal probe will only check at + 0xE4000000.) + + Normally, you should leave this set to zero, to allow the probe at + the normal addresses. + +config MTD_NAND_DISKONCHIP_PROBE_HIGH + bool "Probe high addresses" + depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED + help + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option changes to make it probe between 0xFFFC8000 and + 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be + useful to you. Say 'N'. + +config MTD_NAND_DISKONCHIP_BBTWRITE + bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP" + depends on MTD_NAND_DISKONCHIP + help + On DiskOnChip devices shipped with the INFTL filesystem (Millennium + and 2000 TSOP/Alon), Linux reserves some space at the end of the + device for the Bad Block Table (BBT). If you have existing INFTL + data on your device (created by non-Linux tools such as M-Systems' + DOS drivers), your data might overlap the area Linux wants to use for + the BBT. If this is a concern for you, leave this option disabled and + Linux will not write BBT data into this area. + The downside of leaving this option disabled is that if bad blocks + are detected by Linux, they will not be recorded in the BBT, which + could cause future problems. + Once you enable this option, new filesystems (INFTL or others, created + in Linux or other operating systems) will not use the reserved area. + The only reason not to enable this option is to prevent damage to + preexisting filesystems. + Even if you leave this disabled, you can enable BBT writes at module + load time (assuming you build diskonchip as a module) with the module + parameter "inftl_bbt_write=1". + +endif # MTD_RAW_NAND |