summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/b53
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/b53')
-rw-r--r--drivers/net/dsa/b53/Kconfig47
-rw-r--r--drivers/net/dsa/b53/Makefile8
-rw-r--r--drivers/net/dsa/b53/b53_common.c2774
-rw-r--r--drivers/net/dsa/b53/b53_mdio.c399
-rw-r--r--drivers/net/dsa/b53/b53_mmap.c368
-rw-r--r--drivers/net/dsa/b53/b53_priv.h392
-rw-r--r--drivers/net/dsa/b53/b53_regs.h527
-rw-r--r--drivers/net/dsa/b53/b53_serdes.c249
-rw-r--r--drivers/net/dsa/b53/b53_serdes.h124
-rw-r--r--drivers/net/dsa/b53/b53_spi.c376
-rw-r--r--drivers/net/dsa/b53/b53_srab.c698
11 files changed, 5962 insertions, 0 deletions
diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig
new file mode 100644
index 000000000..90b525160
--- /dev/null
+++ b/drivers/net/dsa/b53/Kconfig
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig B53
+ tristate "Broadcom BCM53xx managed switch support"
+ depends on NET_DSA
+ select NET_DSA_TAG_BRCM
+ select NET_DSA_TAG_BRCM_LEGACY
+ select NET_DSA_TAG_BRCM_PREPEND
+ help
+ This driver adds support for Broadcom managed switch chips. It supports
+ BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX
+ integrated switches.
+
+config B53_SPI_DRIVER
+ tristate "B53 SPI connected switch driver"
+ depends on B53 && SPI
+ help
+ Select to enable support for registering switches configured through SPI.
+
+config B53_MDIO_DRIVER
+ tristate "B53 MDIO connected switch driver"
+ depends on B53
+ help
+ Select to enable support for registering switches configured through MDIO.
+
+config B53_MMAP_DRIVER
+ tristate "B53 MMAP connected switch driver"
+ depends on B53 && HAS_IOMEM
+ default BCM63XX || BMIPS_GENERIC
+ help
+ Select to enable support for memory-mapped switches like the BCM63XX
+ integrated switches.
+
+config B53_SRAB_DRIVER
+ tristate "B53 SRAB connected switch driver"
+ depends on B53 && HAS_IOMEM
+ depends on B53_SERDES || !B53_SERDES
+ default ARCH_BCM_IPROC
+ help
+ Select to enable support for memory-mapped Switch Register Access
+ Bridge Registers (SRAB) like it is found on the BCM53010
+
+config B53_SERDES
+ tristate "B53 SerDes support"
+ depends on B53
+ default ARCH_BCM_NSP
+ help
+ Select to enable support for SerDes on e.g: Northstar Plus SoCs.
diff --git a/drivers/net/dsa/b53/Makefile b/drivers/net/dsa/b53/Makefile
new file mode 100644
index 000000000..b1be13023
--- /dev/null
+++ b/drivers/net/dsa/b53/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_B53) += b53_common.o
+
+obj-$(CONFIG_B53_SPI_DRIVER) += b53_spi.o
+obj-$(CONFIG_B53_MDIO_DRIVER) += b53_mdio.o
+obj-$(CONFIG_B53_MMAP_DRIVER) += b53_mmap.o
+obj-$(CONFIG_B53_SRAB_DRIVER) += b53_srab.o
+obj-$(CONFIG_B53_SERDES) += b53_serdes.o
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
new file mode 100644
index 000000000..59cdfc51c
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -0,0 +1,2774 @@
+/*
+ * B53 switch driver main logic
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/b53.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+
+#include "b53_regs.h"
+#include "b53_priv.h"
+
+struct b53_mib_desc {
+ u8 size;
+ u8 offset;
+ const char *name;
+};
+
+/* BCM5365 MIB counters */
+static const struct b53_mib_desc b53_mibs_65[] = {
+ { 8, 0x00, "TxOctets" },
+ { 4, 0x08, "TxDropPkts" },
+ { 4, 0x10, "TxBroadcastPkts" },
+ { 4, 0x14, "TxMulticastPkts" },
+ { 4, 0x18, "TxUnicastPkts" },
+ { 4, 0x1c, "TxCollisions" },
+ { 4, 0x20, "TxSingleCollision" },
+ { 4, 0x24, "TxMultipleCollision" },
+ { 4, 0x28, "TxDeferredTransmit" },
+ { 4, 0x2c, "TxLateCollision" },
+ { 4, 0x30, "TxExcessiveCollision" },
+ { 4, 0x38, "TxPausePkts" },
+ { 8, 0x44, "RxOctets" },
+ { 4, 0x4c, "RxUndersizePkts" },
+ { 4, 0x50, "RxPausePkts" },
+ { 4, 0x54, "Pkts64Octets" },
+ { 4, 0x58, "Pkts65to127Octets" },
+ { 4, 0x5c, "Pkts128to255Octets" },
+ { 4, 0x60, "Pkts256to511Octets" },
+ { 4, 0x64, "Pkts512to1023Octets" },
+ { 4, 0x68, "Pkts1024to1522Octets" },
+ { 4, 0x6c, "RxOversizePkts" },
+ { 4, 0x70, "RxJabbers" },
+ { 4, 0x74, "RxAlignmentErrors" },
+ { 4, 0x78, "RxFCSErrors" },
+ { 8, 0x7c, "RxGoodOctets" },
+ { 4, 0x84, "RxDropPkts" },
+ { 4, 0x88, "RxUnicastPkts" },
+ { 4, 0x8c, "RxMulticastPkts" },
+ { 4, 0x90, "RxBroadcastPkts" },
+ { 4, 0x94, "RxSAChanges" },
+ { 4, 0x98, "RxFragments" },
+};
+
+#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65)
+
+/* BCM63xx MIB counters */
+static const struct b53_mib_desc b53_mibs_63xx[] = {
+ { 8, 0x00, "TxOctets" },
+ { 4, 0x08, "TxDropPkts" },
+ { 4, 0x0c, "TxQoSPkts" },
+ { 4, 0x10, "TxBroadcastPkts" },
+ { 4, 0x14, "TxMulticastPkts" },
+ { 4, 0x18, "TxUnicastPkts" },
+ { 4, 0x1c, "TxCollisions" },
+ { 4, 0x20, "TxSingleCollision" },
+ { 4, 0x24, "TxMultipleCollision" },
+ { 4, 0x28, "TxDeferredTransmit" },
+ { 4, 0x2c, "TxLateCollision" },
+ { 4, 0x30, "TxExcessiveCollision" },
+ { 4, 0x38, "TxPausePkts" },
+ { 8, 0x3c, "TxQoSOctets" },
+ { 8, 0x44, "RxOctets" },
+ { 4, 0x4c, "RxUndersizePkts" },
+ { 4, 0x50, "RxPausePkts" },
+ { 4, 0x54, "Pkts64Octets" },
+ { 4, 0x58, "Pkts65to127Octets" },
+ { 4, 0x5c, "Pkts128to255Octets" },
+ { 4, 0x60, "Pkts256to511Octets" },
+ { 4, 0x64, "Pkts512to1023Octets" },
+ { 4, 0x68, "Pkts1024to1522Octets" },
+ { 4, 0x6c, "RxOversizePkts" },
+ { 4, 0x70, "RxJabbers" },
+ { 4, 0x74, "RxAlignmentErrors" },
+ { 4, 0x78, "RxFCSErrors" },
+ { 8, 0x7c, "RxGoodOctets" },
+ { 4, 0x84, "RxDropPkts" },
+ { 4, 0x88, "RxUnicastPkts" },
+ { 4, 0x8c, "RxMulticastPkts" },
+ { 4, 0x90, "RxBroadcastPkts" },
+ { 4, 0x94, "RxSAChanges" },
+ { 4, 0x98, "RxFragments" },
+ { 4, 0xa0, "RxSymbolErrors" },
+ { 4, 0xa4, "RxQoSPkts" },
+ { 8, 0xa8, "RxQoSOctets" },
+ { 4, 0xb0, "Pkts1523to2047Octets" },
+ { 4, 0xb4, "Pkts2048to4095Octets" },
+ { 4, 0xb8, "Pkts4096to8191Octets" },
+ { 4, 0xbc, "Pkts8192to9728Octets" },
+ { 4, 0xc0, "RxDiscarded" },
+};
+
+#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx)
+
+/* MIB counters */
+static const struct b53_mib_desc b53_mibs[] = {
+ { 8, 0x00, "TxOctets" },
+ { 4, 0x08, "TxDropPkts" },
+ { 4, 0x10, "TxBroadcastPkts" },
+ { 4, 0x14, "TxMulticastPkts" },
+ { 4, 0x18, "TxUnicastPkts" },
+ { 4, 0x1c, "TxCollisions" },
+ { 4, 0x20, "TxSingleCollision" },
+ { 4, 0x24, "TxMultipleCollision" },
+ { 4, 0x28, "TxDeferredTransmit" },
+ { 4, 0x2c, "TxLateCollision" },
+ { 4, 0x30, "TxExcessiveCollision" },
+ { 4, 0x38, "TxPausePkts" },
+ { 8, 0x50, "RxOctets" },
+ { 4, 0x58, "RxUndersizePkts" },
+ { 4, 0x5c, "RxPausePkts" },
+ { 4, 0x60, "Pkts64Octets" },
+ { 4, 0x64, "Pkts65to127Octets" },
+ { 4, 0x68, "Pkts128to255Octets" },
+ { 4, 0x6c, "Pkts256to511Octets" },
+ { 4, 0x70, "Pkts512to1023Octets" },
+ { 4, 0x74, "Pkts1024to1522Octets" },
+ { 4, 0x78, "RxOversizePkts" },
+ { 4, 0x7c, "RxJabbers" },
+ { 4, 0x80, "RxAlignmentErrors" },
+ { 4, 0x84, "RxFCSErrors" },
+ { 8, 0x88, "RxGoodOctets" },
+ { 4, 0x90, "RxDropPkts" },
+ { 4, 0x94, "RxUnicastPkts" },
+ { 4, 0x98, "RxMulticastPkts" },
+ { 4, 0x9c, "RxBroadcastPkts" },
+ { 4, 0xa0, "RxSAChanges" },
+ { 4, 0xa4, "RxFragments" },
+ { 4, 0xa8, "RxJumboPkts" },
+ { 4, 0xac, "RxSymbolErrors" },
+ { 4, 0xc0, "RxDiscarded" },
+};
+
+#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
+
+static const struct b53_mib_desc b53_mibs_58xx[] = {
+ { 8, 0x00, "TxOctets" },
+ { 4, 0x08, "TxDropPkts" },
+ { 4, 0x0c, "TxQPKTQ0" },
+ { 4, 0x10, "TxBroadcastPkts" },
+ { 4, 0x14, "TxMulticastPkts" },
+ { 4, 0x18, "TxUnicastPKts" },
+ { 4, 0x1c, "TxCollisions" },
+ { 4, 0x20, "TxSingleCollision" },
+ { 4, 0x24, "TxMultipleCollision" },
+ { 4, 0x28, "TxDeferredCollision" },
+ { 4, 0x2c, "TxLateCollision" },
+ { 4, 0x30, "TxExcessiveCollision" },
+ { 4, 0x34, "TxFrameInDisc" },
+ { 4, 0x38, "TxPausePkts" },
+ { 4, 0x3c, "TxQPKTQ1" },
+ { 4, 0x40, "TxQPKTQ2" },
+ { 4, 0x44, "TxQPKTQ3" },
+ { 4, 0x48, "TxQPKTQ4" },
+ { 4, 0x4c, "TxQPKTQ5" },
+ { 8, 0x50, "RxOctets" },
+ { 4, 0x58, "RxUndersizePkts" },
+ { 4, 0x5c, "RxPausePkts" },
+ { 4, 0x60, "RxPkts64Octets" },
+ { 4, 0x64, "RxPkts65to127Octets" },
+ { 4, 0x68, "RxPkts128to255Octets" },
+ { 4, 0x6c, "RxPkts256to511Octets" },
+ { 4, 0x70, "RxPkts512to1023Octets" },
+ { 4, 0x74, "RxPkts1024toMaxPktsOctets" },
+ { 4, 0x78, "RxOversizePkts" },
+ { 4, 0x7c, "RxJabbers" },
+ { 4, 0x80, "RxAlignmentErrors" },
+ { 4, 0x84, "RxFCSErrors" },
+ { 8, 0x88, "RxGoodOctets" },
+ { 4, 0x90, "RxDropPkts" },
+ { 4, 0x94, "RxUnicastPkts" },
+ { 4, 0x98, "RxMulticastPkts" },
+ { 4, 0x9c, "RxBroadcastPkts" },
+ { 4, 0xa0, "RxSAChanges" },
+ { 4, 0xa4, "RxFragments" },
+ { 4, 0xa8, "RxJumboPkt" },
+ { 4, 0xac, "RxSymblErr" },
+ { 4, 0xb0, "InRangeErrCount" },
+ { 4, 0xb4, "OutRangeErrCount" },
+ { 4, 0xb8, "EEELpiEvent" },
+ { 4, 0xbc, "EEELpiDuration" },
+ { 4, 0xc0, "RxDiscard" },
+ { 4, 0xc8, "TxQPKTQ6" },
+ { 4, 0xcc, "TxQPKTQ7" },
+ { 4, 0xd0, "TxPkts64Octets" },
+ { 4, 0xd4, "TxPkts65to127Octets" },
+ { 4, 0xd8, "TxPkts128to255Octets" },
+ { 4, 0xdc, "TxPkts256to511Ocets" },
+ { 4, 0xe0, "TxPkts512to1023Ocets" },
+ { 4, 0xe4, "TxPkts1024toMaxPktOcets" },
+};
+
+#define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx)
+
+static int b53_do_vlan_op(struct b53_device *dev, u8 op)
+{
+ unsigned int i;
+
+ b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
+
+ for (i = 0; i < 10; i++) {
+ u8 vta;
+
+ b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
+ if (!(vta & VTA_START_CMD))
+ return 0;
+
+ usleep_range(100, 200);
+ }
+
+ return -EIO;
+}
+
+static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
+ struct b53_vlan *vlan)
+{
+ if (is5325(dev)) {
+ u32 entry = 0;
+
+ if (vlan->members) {
+ entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
+ VA_UNTAG_S_25) | vlan->members;
+ if (dev->core_rev >= 3)
+ entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
+ else
+ entry |= VA_VALID_25;
+ }
+
+ b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
+ VTA_RW_STATE_WR | VTA_RW_OP_EN);
+ } else if (is5365(dev)) {
+ u16 entry = 0;
+
+ if (vlan->members)
+ entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
+ VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
+
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
+ VTA_RW_STATE_WR | VTA_RW_OP_EN);
+ } else {
+ b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
+ b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
+ (vlan->untag << VTE_UNTAG_S) | vlan->members);
+
+ b53_do_vlan_op(dev, VTA_CMD_WRITE);
+ }
+
+ dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
+ vid, vlan->members, vlan->untag);
+}
+
+static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
+ struct b53_vlan *vlan)
+{
+ if (is5325(dev)) {
+ u32 entry = 0;
+
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
+ VTA_RW_STATE_RD | VTA_RW_OP_EN);
+ b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
+
+ if (dev->core_rev >= 3)
+ vlan->valid = !!(entry & VA_VALID_25_R4);
+ else
+ vlan->valid = !!(entry & VA_VALID_25);
+ vlan->members = entry & VA_MEMBER_MASK;
+ vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
+
+ } else if (is5365(dev)) {
+ u16 entry = 0;
+
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
+ VTA_RW_STATE_WR | VTA_RW_OP_EN);
+ b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
+
+ vlan->valid = !!(entry & VA_VALID_65);
+ vlan->members = entry & VA_MEMBER_MASK;
+ vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
+ } else {
+ u32 entry = 0;
+
+ b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
+ b53_do_vlan_op(dev, VTA_CMD_READ);
+ b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
+ vlan->members = entry & VTE_MEMBERS;
+ vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
+ vlan->valid = true;
+ }
+}
+
+static void b53_set_forwarding(struct b53_device *dev, int enable)
+{
+ u8 mgmt;
+
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+ if (enable)
+ mgmt |= SM_SW_FWD_EN;
+ else
+ mgmt &= ~SM_SW_FWD_EN;
+
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+ /* Include IMP port in dumb forwarding mode
+ */
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+ mgmt |= B53_MII_DUMB_FWDG_EN;
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+
+ /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
+ * frames should be flooded or not.
+ */
+ b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
+ mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
+ b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+}
+
+static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
+ bool enable_filtering)
+{
+ u8 mgmt, vc0, vc1, vc4 = 0, vc5;
+
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
+
+ if (is5325(dev) || is5365(dev)) {
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
+ } else if (is63xx(dev)) {
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
+ } else {
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
+ }
+
+ if (enable) {
+ vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
+ vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
+ vc4 &= ~VC4_ING_VID_CHECK_MASK;
+ if (enable_filtering) {
+ vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
+ vc5 |= VC5_DROP_VTABLE_MISS;
+ } else {
+ vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
+ vc5 &= ~VC5_DROP_VTABLE_MISS;
+ }
+
+ if (is5325(dev))
+ vc0 &= ~VC0_RESERVED_1;
+
+ if (is5325(dev) || is5365(dev))
+ vc1 |= VC1_RX_MCST_TAG_EN;
+
+ } else {
+ vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
+ vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
+ vc4 &= ~VC4_ING_VID_CHECK_MASK;
+ vc5 &= ~VC5_DROP_VTABLE_MISS;
+
+ if (is5325(dev) || is5365(dev))
+ vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
+ else
+ vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
+
+ if (is5325(dev) || is5365(dev))
+ vc1 &= ~VC1_RX_MCST_TAG_EN;
+ }
+
+ if (!is5325(dev) && !is5365(dev))
+ vc5 &= ~VC5_VID_FFF_EN;
+
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
+
+ if (is5325(dev) || is5365(dev)) {
+ /* enable the high 8 bit vid check on 5325 */
+ if (is5325(dev) && enable)
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
+ VC3_HIGH_8BIT_EN);
+ else
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
+
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
+ } else if (is63xx(dev)) {
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
+ } else {
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
+ b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
+ }
+
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+ dev->vlan_enabled = enable;
+
+ dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
+ port, enable, enable_filtering);
+}
+
+static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
+{
+ u32 port_mask = 0;
+ u16 max_size = JMS_MIN_SIZE;
+
+ if (is5325(dev) || is5365(dev))
+ return -EINVAL;
+
+ if (enable) {
+ port_mask = dev->enabled_ports;
+ max_size = JMS_MAX_SIZE;
+ if (allow_10_100)
+ port_mask |= JPM_10_100_JUMBO_EN;
+ }
+
+ b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
+ return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
+}
+
+static int b53_flush_arl(struct b53_device *dev, u8 mask)
+{
+ unsigned int i;
+
+ b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
+ FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
+
+ for (i = 0; i < 10; i++) {
+ u8 fast_age_ctrl;
+
+ b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
+ &fast_age_ctrl);
+
+ if (!(fast_age_ctrl & FAST_AGE_DONE))
+ goto out;
+
+ msleep(1);
+ }
+
+ return -ETIMEDOUT;
+out:
+ /* Only age dynamic entries (default behavior) */
+ b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
+ return 0;
+}
+
+static int b53_fast_age_port(struct b53_device *dev, int port)
+{
+ b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
+
+ return b53_flush_arl(dev, FAST_AGE_PORT);
+}
+
+static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
+{
+ b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
+
+ return b53_flush_arl(dev, FAST_AGE_VLAN);
+}
+
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+{
+ struct b53_device *dev = ds->priv;
+ unsigned int i;
+ u16 pvlan;
+
+ /* Enable the IMP port to be in the same VLAN as the other ports
+ * on a per-port basis such that we only have Port i and IMP in
+ * the same VLAN.
+ */
+ b53_for_each_port(dev, i) {
+ b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
+ pvlan |= BIT(cpu_port);
+ b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
+ }
+}
+EXPORT_SYMBOL(b53_imp_vlan_setup);
+
+static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
+ bool unicast)
+{
+ u16 uc;
+
+ b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
+ if (unicast)
+ uc |= BIT(port);
+ else
+ uc &= ~BIT(port);
+ b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
+}
+
+static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
+ bool multicast)
+{
+ u16 mc;
+
+ b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
+ if (multicast)
+ mc |= BIT(port);
+ else
+ mc &= ~BIT(port);
+ b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
+
+ b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
+ if (multicast)
+ mc |= BIT(port);
+ else
+ mc &= ~BIT(port);
+ b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
+}
+
+static void b53_port_set_learning(struct b53_device *dev, int port,
+ bool learning)
+{
+ u16 reg;
+
+ b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
+ if (learning)
+ reg &= ~BIT(port);
+ else
+ reg |= BIT(port);
+ b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
+}
+
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+ struct b53_device *dev = ds->priv;
+ unsigned int cpu_port;
+ int ret = 0;
+ u16 pvlan;
+
+ if (!dsa_is_user_port(ds, port))
+ return 0;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+
+ b53_port_set_ucast_flood(dev, port, true);
+ b53_port_set_mcast_flood(dev, port, true);
+ b53_port_set_learning(dev, port, false);
+
+ if (dev->ops->irq_enable)
+ ret = dev->ops->irq_enable(dev, port);
+ if (ret)
+ return ret;
+
+ /* Clear the Rx and Tx disable bits and set to no spanning tree */
+ b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
+
+ /* Set this port, and only this one to be in the default VLAN,
+ * if member of a bridge, restore its membership prior to
+ * bringing down this port.
+ */
+ b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
+ pvlan &= ~0x1ff;
+ pvlan |= BIT(port);
+ pvlan |= dev->ports[port].vlan_ctl_mask;
+ b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
+
+ b53_imp_vlan_setup(ds, cpu_port);
+
+ /* If EEE was enabled, restore it */
+ if (dev->ports[port].eee.eee_enabled)
+ b53_eee_enable_set(ds, port, true);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_enable_port);
+
+void b53_disable_port(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ u8 reg;
+
+ /* Disable Tx/Rx for the port */
+ b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
+ reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
+ b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
+
+ if (dev->ops->irq_disable)
+ dev->ops->irq_disable(dev, port);
+}
+EXPORT_SYMBOL(b53_disable_port);
+
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
+ u8 hdr_ctl, val;
+ u16 reg;
+
+ /* Resolve which bit controls the Broadcom tag */
+ switch (port) {
+ case 8:
+ val = BRCM_HDR_P8_EN;
+ break;
+ case 7:
+ val = BRCM_HDR_P7_EN;
+ break;
+ case 5:
+ val = BRCM_HDR_P5_EN;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ /* Enable management mode if tagging is requested */
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
+ if (tag_en)
+ hdr_ctl |= SM_SW_FWD_MODE;
+ else
+ hdr_ctl &= ~SM_SW_FWD_MODE;
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
+
+ /* Configure the appropriate IMP port */
+ b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
+ if (port == 8)
+ hdr_ctl |= GC_FRM_MGMT_PORT_MII;
+ else if (port == 5)
+ hdr_ctl |= GC_FRM_MGMT_PORT_M;
+ b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
+
+ /* Enable Broadcom tags for IMP port */
+ b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
+ if (tag_en)
+ hdr_ctl |= val;
+ else
+ hdr_ctl &= ~val;
+ b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
+
+ /* Registers below are only accessible on newer devices */
+ if (!is58xx(dev))
+ return;
+
+ /* Enable reception Broadcom tag for CPU TX (switch RX) to
+ * allow us to tag outgoing frames
+ */
+ b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
+ if (tag_en)
+ reg &= ~BIT(port);
+ else
+ reg |= BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
+
+ /* Enable transmission of Broadcom tags from the switch (CPU RX) to
+ * allow delivering frames to the per-port net_devices
+ */
+ b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
+ if (tag_en)
+ reg &= ~BIT(port);
+ else
+ reg |= BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
+}
+EXPORT_SYMBOL(b53_brcm_hdr_setup);
+
+static void b53_enable_cpu_port(struct b53_device *dev, int port)
+{
+ u8 port_ctrl;
+
+ /* BCM5325 CPU port is at 8 */
+ if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
+ port = B53_CPU_PORT;
+
+ port_ctrl = PORT_CTRL_RX_BCST_EN |
+ PORT_CTRL_RX_MCST_EN |
+ PORT_CTRL_RX_UCST_EN;
+ b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
+
+ b53_brcm_hdr_setup(dev->ds, port);
+
+ b53_port_set_ucast_flood(dev, port, true);
+ b53_port_set_mcast_flood(dev, port, true);
+ b53_port_set_learning(dev, port, false);
+}
+
+static void b53_enable_mib(struct b53_device *dev)
+{
+ u8 gc;
+
+ b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
+ gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
+ b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
+}
+
+static u16 b53_default_pvid(struct b53_device *dev)
+{
+ if (is5325(dev) || is5365(dev))
+ return 1;
+ else
+ return 0;
+}
+
+static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+
+ return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
+}
+
+int b53_configure_vlan(struct dsa_switch *ds)
+{
+ struct b53_device *dev = ds->priv;
+ struct b53_vlan vl = { 0 };
+ struct b53_vlan *v;
+ int i, def_vid;
+ u16 vid;
+
+ def_vid = b53_default_pvid(dev);
+
+ /* clear all vlan entries */
+ if (is5325(dev) || is5365(dev)) {
+ for (i = def_vid; i < dev->num_vlans; i++)
+ b53_set_vlan_entry(dev, i, &vl);
+ } else {
+ b53_do_vlan_op(dev, VTA_CMD_CLEAR);
+ }
+
+ b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
+
+ /* Create an untagged VLAN entry for the default PVID in case
+ * CONFIG_VLAN_8021Q is disabled and there are no calls to
+ * dsa_slave_vlan_rx_add_vid() to create the default VLAN
+ * entry. Do this only when the tagging protocol is not
+ * DSA_TAG_PROTO_NONE
+ */
+ b53_for_each_port(dev, i) {
+ v = &dev->vlans[def_vid];
+ v->members |= BIT(i);
+ if (!b53_vlan_port_needs_forced_tagged(ds, i))
+ v->untag = v->members;
+ b53_write16(dev, B53_VLAN_PAGE,
+ B53_VLAN_PORT_DEF_TAG(i), def_vid);
+ }
+
+ /* Upon initial call we have not set-up any VLANs, but upon
+ * system resume, we need to restore all VLAN entries.
+ */
+ for (vid = def_vid; vid < dev->num_vlans; vid++) {
+ v = &dev->vlans[vid];
+
+ if (!v->members)
+ continue;
+
+ b53_set_vlan_entry(dev, vid, v);
+ b53_fast_age_vlan(dev, vid);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_configure_vlan);
+
+static void b53_switch_reset_gpio(struct b53_device *dev)
+{
+ int gpio = dev->reset_gpio;
+
+ if (gpio < 0)
+ return;
+
+ /* Reset sequence: RESET low(50ms)->high(20ms)
+ */
+ gpio_set_value(gpio, 0);
+ mdelay(50);
+
+ gpio_set_value(gpio, 1);
+ mdelay(20);
+
+ dev->current_page = 0xff;
+}
+
+static int b53_switch_reset(struct b53_device *dev)
+{
+ unsigned int timeout = 1000;
+ u8 mgmt, reg;
+
+ b53_switch_reset_gpio(dev);
+
+ if (is539x(dev)) {
+ b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
+ b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
+ }
+
+ /* This is specific to 58xx devices here, do not use is58xx() which
+ * covers the larger Starfigther 2 family, including 7445/7278 which
+ * still use this driver as a library and need to perform the reset
+ * earlier.
+ */
+ if (dev->chip_id == BCM58XX_DEVICE_ID ||
+ dev->chip_id == BCM583XX_DEVICE_ID) {
+ b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+ reg |= SW_RST | EN_SW_RST | EN_CH_RST;
+ b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
+
+ do {
+ b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+ if (!(reg & SW_RST))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout-- > 0);
+
+ if (timeout == 0) {
+ dev_err(dev->dev,
+ "Timeout waiting for SW_RST to clear!\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+ if (!(mgmt & SM_SW_FWD_EN)) {
+ mgmt &= ~SM_SW_FWD_MODE;
+ mgmt |= SM_SW_FWD_EN;
+
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+ if (!(mgmt & SM_SW_FWD_EN)) {
+ dev_err(dev->dev, "Failed to enable switch!\n");
+ return -EINVAL;
+ }
+ }
+
+ b53_enable_mib(dev);
+
+ return b53_flush_arl(dev, FAST_AGE_STATIC);
+}
+
+static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
+{
+ struct b53_device *priv = ds->priv;
+ u16 value = 0;
+ int ret;
+
+ if (priv->ops->phy_read16)
+ ret = priv->ops->phy_read16(priv, addr, reg, &value);
+ else
+ ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
+ reg * 2, &value);
+
+ return ret ? ret : value;
+}
+
+static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ struct b53_device *priv = ds->priv;
+
+ if (priv->ops->phy_write16)
+ return priv->ops->phy_write16(priv, addr, reg, val);
+
+ return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
+}
+
+static int b53_reset_switch(struct b53_device *priv)
+{
+ /* reset vlans */
+ memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
+ memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
+
+ priv->serdes_lane = B53_INVALID_LANE;
+
+ return b53_switch_reset(priv);
+}
+
+static int b53_apply_config(struct b53_device *priv)
+{
+ /* disable switching */
+ b53_set_forwarding(priv, 0);
+
+ b53_configure_vlan(priv->ds);
+
+ /* enable switching */
+ b53_set_forwarding(priv, 1);
+
+ return 0;
+}
+
+static void b53_reset_mib(struct b53_device *priv)
+{
+ u8 gc;
+
+ b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
+
+ b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
+ msleep(1);
+ b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
+ msleep(1);
+}
+
+static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
+{
+ if (is5365(dev))
+ return b53_mibs_65;
+ else if (is63xx(dev))
+ return b53_mibs_63xx;
+ else if (is58xx(dev))
+ return b53_mibs_58xx;
+ else
+ return b53_mibs;
+}
+
+static unsigned int b53_get_mib_size(struct b53_device *dev)
+{
+ if (is5365(dev))
+ return B53_MIBS_65_SIZE;
+ else if (is63xx(dev))
+ return B53_MIBS_63XX_SIZE;
+ else if (is58xx(dev))
+ return B53_MIBS_58XX_SIZE;
+ else
+ return B53_MIBS_SIZE;
+}
+
+static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
+{
+ /* These ports typically do not have built-in PHYs */
+ switch (port) {
+ case B53_CPU_PORT_25:
+ case 7:
+ case B53_CPU_PORT:
+ return NULL;
+ }
+
+ return mdiobus_get_phy(ds->slave_mii_bus, port);
+}
+
+void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ struct b53_device *dev = ds->priv;
+ const struct b53_mib_desc *mibs = b53_get_mib(dev);
+ unsigned int mib_size = b53_get_mib_size(dev);
+ struct phy_device *phydev;
+ unsigned int i;
+
+ if (stringset == ETH_SS_STATS) {
+ for (i = 0; i < mib_size; i++)
+ strscpy(data + i * ETH_GSTRING_LEN,
+ mibs[i].name, ETH_GSTRING_LEN);
+ } else if (stringset == ETH_SS_PHY_STATS) {
+ phydev = b53_get_phy_device(ds, port);
+ if (!phydev)
+ return;
+
+ phy_ethtool_get_strings(phydev, data);
+ }
+}
+EXPORT_SYMBOL(b53_get_strings);
+
+void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+ struct b53_device *dev = ds->priv;
+ const struct b53_mib_desc *mibs = b53_get_mib(dev);
+ unsigned int mib_size = b53_get_mib_size(dev);
+ const struct b53_mib_desc *s;
+ unsigned int i;
+ u64 val = 0;
+
+ if (is5365(dev) && port == 5)
+ port = 8;
+
+ mutex_lock(&dev->stats_mutex);
+
+ for (i = 0; i < mib_size; i++) {
+ s = &mibs[i];
+
+ if (s->size == 8) {
+ b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
+ } else {
+ u32 val32;
+
+ b53_read32(dev, B53_MIB_PAGE(port), s->offset,
+ &val32);
+ val = val32;
+ }
+ data[i] = (u64)val;
+ }
+
+ mutex_unlock(&dev->stats_mutex);
+}
+EXPORT_SYMBOL(b53_get_ethtool_stats);
+
+void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+ struct phy_device *phydev;
+
+ phydev = b53_get_phy_device(ds, port);
+ if (!phydev)
+ return;
+
+ phy_ethtool_get_stats(phydev, NULL, data);
+}
+EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
+
+int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ struct b53_device *dev = ds->priv;
+ struct phy_device *phydev;
+
+ if (sset == ETH_SS_STATS) {
+ return b53_get_mib_size(dev);
+ } else if (sset == ETH_SS_PHY_STATS) {
+ phydev = b53_get_phy_device(ds, port);
+ if (!phydev)
+ return 0;
+
+ return phy_ethtool_get_sset_count(phydev);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_get_sset_count);
+
+enum b53_devlink_resource_id {
+ B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+};
+
+static u64 b53_devlink_vlan_table_get(void *priv)
+{
+ struct b53_device *dev = priv;
+ struct b53_vlan *vl;
+ unsigned int i;
+ u64 count = 0;
+
+ for (i = 0; i < dev->num_vlans; i++) {
+ vl = &dev->vlans[i];
+ if (vl->members)
+ count++;
+ }
+
+ return count;
+}
+
+int b53_setup_devlink_resources(struct dsa_switch *ds)
+{
+ struct devlink_resource_size_params size_params;
+ struct b53_device *dev = ds->priv;
+ int err;
+
+ devlink_resource_size_params_init(&size_params, dev->num_vlans,
+ dev->num_vlans,
+ 1, DEVLINK_RESOURCE_UNIT_ENTRY);
+
+ err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
+ B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+ DEVLINK_RESOURCE_ID_PARENT_TOP,
+ &size_params);
+ if (err)
+ goto out;
+
+ dsa_devlink_resource_occ_get_register(ds,
+ B53_DEVLINK_PARAM_ID_VLAN_TABLE,
+ b53_devlink_vlan_table_get, dev);
+
+ return 0;
+out:
+ dsa_devlink_resources_unregister(ds);
+ return err;
+}
+EXPORT_SYMBOL(b53_setup_devlink_resources);
+
+static int b53_setup(struct dsa_switch *ds)
+{
+ struct b53_device *dev = ds->priv;
+ unsigned int port;
+ int ret;
+
+ /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
+ * which forces the CPU port to be tagged in all VLANs.
+ */
+ ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
+
+ ret = b53_reset_switch(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+ return ret;
+ }
+
+ b53_reset_mib(dev);
+
+ ret = b53_apply_config(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to apply configuration\n");
+ return ret;
+ }
+
+ /* Configure IMP/CPU port, disable all other ports. Enabled
+ * ports will be configured with .port_enable
+ */
+ for (port = 0; port < dev->num_ports; port++) {
+ if (dsa_is_cpu_port(ds, port))
+ b53_enable_cpu_port(dev, port);
+ else
+ b53_disable_port(ds, port);
+ }
+
+ return b53_setup_devlink_resources(ds);
+}
+
+static void b53_teardown(struct dsa_switch *ds)
+{
+ dsa_devlink_resources_unregister(ds);
+}
+
+static void b53_force_link(struct b53_device *dev, int port, int link)
+{
+ u8 reg, val, off;
+
+ /* Override the port settings */
+ if (port == dev->imp_port) {
+ off = B53_PORT_OVERRIDE_CTRL;
+ val = PORT_OVERRIDE_EN;
+ } else {
+ off = B53_GMII_PORT_OVERRIDE_CTRL(port);
+ val = GMII_PO_EN;
+ }
+
+ b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+ reg |= val;
+ if (link)
+ reg |= PORT_OVERRIDE_LINK;
+ else
+ reg &= ~PORT_OVERRIDE_LINK;
+ b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
+
+static void b53_force_port_config(struct b53_device *dev, int port,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ u8 reg, val, off;
+
+ /* Override the port settings */
+ if (port == dev->imp_port) {
+ off = B53_PORT_OVERRIDE_CTRL;
+ val = PORT_OVERRIDE_EN;
+ } else {
+ off = B53_GMII_PORT_OVERRIDE_CTRL(port);
+ val = GMII_PO_EN;
+ }
+
+ b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+ reg |= val;
+ if (duplex == DUPLEX_FULL)
+ reg |= PORT_OVERRIDE_FULL_DUPLEX;
+ else
+ reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
+
+ switch (speed) {
+ case 2000:
+ reg |= PORT_OVERRIDE_SPEED_2000M;
+ fallthrough;
+ case SPEED_1000:
+ reg |= PORT_OVERRIDE_SPEED_1000M;
+ break;
+ case SPEED_100:
+ reg |= PORT_OVERRIDE_SPEED_100M;
+ break;
+ case SPEED_10:
+ reg |= PORT_OVERRIDE_SPEED_10M;
+ break;
+ default:
+ dev_err(dev->dev, "unknown speed: %d\n", speed);
+ return;
+ }
+
+ if (rx_pause)
+ reg |= PORT_OVERRIDE_RX_FLOW;
+ if (tx_pause)
+ reg |= PORT_OVERRIDE_TX_FLOW;
+
+ b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
+
+static void b53_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct b53_device *dev = ds->priv;
+ struct ethtool_eee *p = &dev->ports[port].eee;
+ u8 rgmii_ctrl = 0, reg = 0, off;
+ bool tx_pause = false;
+ bool rx_pause = false;
+
+ if (!phy_is_pseudo_fixed_link(phydev))
+ return;
+
+ /* Enable flow control on BCM5301x's CPU port */
+ if (is5301x(dev) && dsa_is_cpu_port(ds, port))
+ tx_pause = rx_pause = true;
+
+ if (phydev->pause) {
+ if (phydev->asym_pause)
+ tx_pause = true;
+ rx_pause = true;
+ }
+
+ b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
+ tx_pause, rx_pause);
+ b53_force_link(dev, port, phydev->link);
+
+ if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
+ if (port == dev->imp_port)
+ off = B53_RGMII_CTRL_IMP;
+ else
+ off = B53_RGMII_CTRL_P(port);
+
+ /* Configure the port RGMII clock delay by DLL disabled and
+ * tx_clk aligned timing (restoring to reset defaults)
+ */
+ b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
+ rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
+ RGMII_CTRL_TIMING_SEL);
+
+ /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
+ * sure that we enable the port TX clock internal delay to
+ * account for this internal delay that is inserted, otherwise
+ * the switch won't be able to receive correctly.
+ *
+ * PHY_INTERFACE_MODE_RGMII means that we are not introducing
+ * any delay neither on transmission nor reception, so the
+ * BCM53125 must also be configured accordingly to account for
+ * the lack of delay and introduce
+ *
+ * The BCM53125 switch has its RX clock and TX clock control
+ * swapped, hence the reason why we modify the TX clock path in
+ * the "RGMII" case
+ */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
+ rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
+ b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
+
+ dev_info(ds->dev, "Configured port %d for %s\n", port,
+ phy_modes(phydev->interface));
+ }
+
+ /* configure MII port if necessary */
+ if (is5325(dev)) {
+ b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+ &reg);
+
+ /* reverse mii needs to be enabled */
+ if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
+ b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+ reg | PORT_OVERRIDE_RV_MII_25);
+ b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+ &reg);
+
+ if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
+ dev_err(ds->dev,
+ "Failed to enable reverse MII mode\n");
+ return;
+ }
+ }
+ }
+
+ /* Re-negotiate EEE if it was enabled already */
+ p->eee_enabled = b53_eee_init(ds, port, phydev);
+}
+
+void b53_port_event(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ bool link;
+ u16 sts;
+
+ b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
+ link = !!(sts & BIT(port));
+ dsa_port_phylink_mac_change(ds, port, link);
+}
+EXPORT_SYMBOL(b53_port_event);
+
+static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ struct b53_device *dev = ds->priv;
+
+ /* Internal ports need GMII for PHYLIB */
+ __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
+
+ /* These switches appear to support MII and RevMII too, but beyond
+ * this, the code gives very few clues. FIXME: We probably need more
+ * interface modes here.
+ *
+ * According to b53_srab_mux_init(), ports 3..5 can support:
+ * SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
+ * However, the interface mode read from the MUX configuration is
+ * not passed back to DSA, so phylink uses NA.
+ * DT can specify RGMII for ports 0, 1.
+ * For MDIO, port 8 can be RGMII_TXID.
+ */
+ __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
+
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100;
+
+ /* 5325/5365 are not capable of gigabit speeds, everything else is.
+ * Note: the original code also exclulded Gigagbit for MII, RevMII
+ * and 802.3z modes. MII and RevMII are not able to work above 100M,
+ * so will be excluded by the generic validator implementation.
+ * However, the exclusion of Gigabit for 802.3z just seems wrong.
+ */
+ if (!(is5325(dev) || is5365(dev)))
+ config->mac_capabilities |= MAC_1000;
+
+ /* Get the implementation specific capabilities */
+ if (dev->ops->phylink_get_caps)
+ dev->ops->phylink_get_caps(dev, port, config);
+
+ /* This driver does not make use of the speed, duplex, pause or the
+ * advertisement in its mac_config, so it is safe to mark this driver
+ * as non-legacy.
+ */
+ config->legacy_pre_march2020 = false;
+}
+
+static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds,
+ int port,
+ phy_interface_t interface)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (!dev->ops->phylink_mac_select_pcs)
+ return NULL;
+
+ return dev->ops->phylink_mac_select_pcs(dev, port, interface);
+}
+
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+}
+EXPORT_SYMBOL(b53_phylink_mac_config);
+
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_link(dev, port, false);
+ return;
+ }
+
+ if (phy_interface_mode_is_8023z(interface) &&
+ dev->ops->serdes_link_set)
+ dev->ops->serdes_link_set(dev, port, mode, interface, false);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_down);
+
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_port_config(dev, port, speed, duplex,
+ tx_pause, rx_pause);
+ b53_force_link(dev, port, true);
+ return;
+ }
+
+ if (phy_interface_mode_is_8023z(interface) &&
+ dev->ops->serdes_link_set)
+ dev->ops->serdes_link_set(dev, port, mode, interface, true);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_up);
+
+int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct b53_device *dev = ds->priv;
+
+ b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_vlan_filtering);
+
+static int b53_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct b53_device *dev = ds->priv;
+
+ if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
+ return -EOPNOTSUPP;
+
+ /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
+ * receiving VLAN tagged frames at all, we can still allow the port to
+ * be configured for egress untagged.
+ */
+ if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
+ !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
+ return -EINVAL;
+
+ if (vlan->vid >= dev->num_vlans)
+ return -ERANGE;
+
+ b53_enable_vlan(dev, port, true, ds->vlan_filtering);
+
+ return 0;
+}
+
+int b53_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+{
+ struct b53_device *dev = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ struct b53_vlan *vl;
+ int err;
+
+ err = b53_vlan_prepare(ds, port, vlan);
+ if (err)
+ return err;
+
+ vl = &dev->vlans[vlan->vid];
+
+ b53_get_vlan_entry(dev, vlan->vid, vl);
+
+ if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
+ untagged = true;
+
+ vl->members |= BIT(port);
+ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
+ vl->untag |= BIT(port);
+ else
+ vl->untag &= ~BIT(port);
+
+ b53_set_vlan_entry(dev, vlan->vid, vl);
+ b53_fast_age_vlan(dev, vlan->vid);
+
+ if (pvid && !dsa_is_cpu_port(ds, port)) {
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
+ vlan->vid);
+ b53_fast_age_vlan(dev, vlan->vid);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_vlan_add);
+
+int b53_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct b53_device *dev = ds->priv;
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ struct b53_vlan *vl;
+ u16 pvid;
+
+ b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
+
+ vl = &dev->vlans[vlan->vid];
+
+ b53_get_vlan_entry(dev, vlan->vid, vl);
+
+ vl->members &= ~BIT(port);
+
+ if (pvid == vlan->vid)
+ pvid = b53_default_pvid(dev);
+
+ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
+ vl->untag &= ~(BIT(port));
+
+ b53_set_vlan_entry(dev, vlan->vid, vl);
+ b53_fast_age_vlan(dev, vlan->vid);
+
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
+ b53_fast_age_vlan(dev, pvid);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_vlan_del);
+
+/* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */
+static int b53_arl_op_wait(struct b53_device *dev)
+{
+ unsigned int timeout = 10;
+ u8 reg;
+
+ do {
+ b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
+ if (!(reg & ARLTBL_START_DONE))
+ return 0;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
+
+ return -ETIMEDOUT;
+}
+
+static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
+{
+ u8 reg;
+
+ if (op > ARLTBL_RW)
+ return -EINVAL;
+
+ b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
+ reg |= ARLTBL_START_DONE;
+ if (op)
+ reg |= ARLTBL_RW;
+ else
+ reg &= ~ARLTBL_RW;
+ if (dev->vlan_enabled)
+ reg &= ~ARLTBL_IVL_SVL_SELECT;
+ else
+ reg |= ARLTBL_IVL_SVL_SELECT;
+ b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
+
+ return b53_arl_op_wait(dev);
+}
+
+static int b53_arl_read(struct b53_device *dev, u64 mac,
+ u16 vid, struct b53_arl_entry *ent, u8 *idx)
+{
+ DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
+ unsigned int i;
+ int ret;
+
+ ret = b53_arl_op_wait(dev);
+ if (ret)
+ return ret;
+
+ bitmap_zero(free_bins, dev->num_arl_bins);
+
+ /* Read the bins */
+ for (i = 0; i < dev->num_arl_bins; i++) {
+ u64 mac_vid;
+ u32 fwd_entry;
+
+ b53_read64(dev, B53_ARLIO_PAGE,
+ B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
+ b53_read32(dev, B53_ARLIO_PAGE,
+ B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
+ b53_arl_to_entry(ent, mac_vid, fwd_entry);
+
+ if (!(fwd_entry & ARLTBL_VALID)) {
+ set_bit(i, free_bins);
+ continue;
+ }
+ if ((mac_vid & ARLTBL_MAC_MASK) != mac)
+ continue;
+ if (dev->vlan_enabled &&
+ ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
+ continue;
+ *idx = i;
+ return 0;
+ }
+
+ *idx = find_first_bit(free_bins, dev->num_arl_bins);
+ return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
+}
+
+static int b53_arl_op(struct b53_device *dev, int op, int port,
+ const unsigned char *addr, u16 vid, bool is_valid)
+{
+ struct b53_arl_entry ent;
+ u32 fwd_entry;
+ u64 mac, mac_vid = 0;
+ u8 idx = 0;
+ int ret;
+
+ /* Convert the array into a 64-bit MAC */
+ mac = ether_addr_to_u64(addr);
+
+ /* Perform a read for the given MAC and VID */
+ b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
+ b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
+
+ /* Issue a read operation for this MAC */
+ ret = b53_arl_rw_op(dev, 1);
+ if (ret)
+ return ret;
+
+ ret = b53_arl_read(dev, mac, vid, &ent, &idx);
+
+ /* If this is a read, just finish now */
+ if (op)
+ return ret;
+
+ switch (ret) {
+ case -ETIMEDOUT:
+ return ret;
+ case -ENOSPC:
+ dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+ addr, vid);
+ return is_valid ? ret : 0;
+ case -ENOENT:
+ /* We could not find a matching MAC, so reset to a new entry */
+ dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+ addr, vid, idx);
+ fwd_entry = 0;
+ break;
+ default:
+ dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+ addr, vid, idx);
+ break;
+ }
+
+ /* For multicast address, the port is a bitmask and the validity
+ * is determined by having at least one port being still active
+ */
+ if (!is_multicast_ether_addr(addr)) {
+ ent.port = port;
+ ent.is_valid = is_valid;
+ } else {
+ if (is_valid)
+ ent.port |= BIT(port);
+ else
+ ent.port &= ~BIT(port);
+
+ ent.is_valid = !!(ent.port);
+ }
+
+ ent.vid = vid;
+ ent.is_static = true;
+ ent.is_age = false;
+ memcpy(ent.mac, addr, ETH_ALEN);
+ b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
+
+ b53_write64(dev, B53_ARLIO_PAGE,
+ B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
+ b53_write32(dev, B53_ARLIO_PAGE,
+ B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
+
+ return b53_arl_rw_op(dev, 0);
+}
+
+int b53_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct b53_device *priv = ds->priv;
+ int ret;
+
+ /* 5325 and 5365 require some more massaging, but could
+ * be supported eventually
+ */
+ if (is5325(priv) || is5365(priv))
+ return -EOPNOTSUPP;
+
+ mutex_lock(&priv->arl_mutex);
+ ret = b53_arl_op(priv, 0, port, addr, vid, true);
+ mutex_unlock(&priv->arl_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(b53_fdb_add);
+
+int b53_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct b53_device *priv = ds->priv;
+ int ret;
+
+ mutex_lock(&priv->arl_mutex);
+ ret = b53_arl_op(priv, 0, port, addr, vid, false);
+ mutex_unlock(&priv->arl_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(b53_fdb_del);
+
+static int b53_arl_search_wait(struct b53_device *dev)
+{
+ unsigned int timeout = 1000;
+ u8 reg;
+
+ do {
+ b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
+ if (!(reg & ARL_SRCH_STDN))
+ return 0;
+
+ if (reg & ARL_SRCH_VLID)
+ return 0;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ return -ETIMEDOUT;
+}
+
+static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
+ struct b53_arl_entry *ent)
+{
+ u64 mac_vid;
+ u32 fwd_entry;
+
+ b53_read64(dev, B53_ARLIO_PAGE,
+ B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
+ b53_read32(dev, B53_ARLIO_PAGE,
+ B53_ARL_SRCH_RSTL(idx), &fwd_entry);
+ b53_arl_to_entry(ent, mac_vid, fwd_entry);
+}
+
+static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ if (!ent->is_valid)
+ return 0;
+
+ if (port != ent->port)
+ return 0;
+
+ return cb(ent->mac, ent->vid, ent->is_static, data);
+}
+
+int b53_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct b53_device *priv = ds->priv;
+ struct b53_arl_entry results[2];
+ unsigned int count = 0;
+ int ret;
+ u8 reg;
+
+ mutex_lock(&priv->arl_mutex);
+
+ /* Start search operation */
+ reg = ARL_SRCH_STDN;
+ b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
+
+ do {
+ ret = b53_arl_search_wait(priv);
+ if (ret)
+ break;
+
+ b53_arl_search_rd(priv, 0, &results[0]);
+ ret = b53_fdb_copy(port, &results[0], cb, data);
+ if (ret)
+ break;
+
+ if (priv->num_arl_bins > 2) {
+ b53_arl_search_rd(priv, 1, &results[1]);
+ ret = b53_fdb_copy(port, &results[1], cb, data);
+ if (ret)
+ break;
+
+ if (!results[0].is_valid && !results[1].is_valid)
+ break;
+ }
+
+ } while (count++ < b53_max_arl_entries(priv) / 2);
+
+ mutex_unlock(&priv->arl_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_fdb_dump);
+
+int b53_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db)
+{
+ struct b53_device *priv = ds->priv;
+ int ret;
+
+ /* 5325 and 5365 require some more massaging, but could
+ * be supported eventually
+ */
+ if (is5325(priv) || is5365(priv))
+ return -EOPNOTSUPP;
+
+ mutex_lock(&priv->arl_mutex);
+ ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
+ mutex_unlock(&priv->arl_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(b53_mdb_add);
+
+int b53_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db)
+{
+ struct b53_device *priv = ds->priv;
+ int ret;
+
+ mutex_lock(&priv->arl_mutex);
+ ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
+ mutex_unlock(&priv->arl_mutex);
+ if (ret)
+ dev_err(ds->dev, "failed to delete MDB entry\n");
+
+ return ret;
+}
+EXPORT_SYMBOL(b53_mdb_del);
+
+int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
+ bool *tx_fwd_offload, struct netlink_ext_ack *extack)
+{
+ struct b53_device *dev = ds->priv;
+ s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ u16 pvlan, reg;
+ unsigned int i;
+
+ /* On 7278, port 7 which connects to the ASP should only receive
+ * traffic from matching CFP rules.
+ */
+ if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
+ return -EINVAL;
+
+ /* Make this port leave the all VLANs join since we will have proper
+ * VLAN entries from now on
+ */
+ if (is58xx(dev)) {
+ b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
+ reg &= ~BIT(port);
+ if ((reg & BIT(cpu_port)) == BIT(cpu_port))
+ reg &= ~BIT(cpu_port);
+ b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
+ }
+
+ b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
+
+ b53_for_each_port(dev, i) {
+ if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+ continue;
+
+ /* Add this local port to the remote port VLAN control
+ * membership and update the remote port bitmask
+ */
+ b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
+ reg |= BIT(port);
+ b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
+ dev->ports[i].vlan_ctl_mask = reg;
+
+ pvlan |= BIT(i);
+ }
+
+ /* Configure the local port VLAN control membership to include
+ * remote ports and update the local port bitmask
+ */
+ b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
+ dev->ports[port].vlan_ctl_mask = pvlan;
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_br_join);
+
+void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
+{
+ struct b53_device *dev = ds->priv;
+ struct b53_vlan *vl = &dev->vlans[0];
+ s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ unsigned int i;
+ u16 pvlan, reg, pvid;
+
+ b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
+
+ b53_for_each_port(dev, i) {
+ /* Don't touch the remaining ports */
+ if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+ continue;
+
+ b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
+ reg &= ~BIT(port);
+ b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
+ dev->ports[port].vlan_ctl_mask = reg;
+
+ /* Prevent self removal to preserve isolation */
+ if (port != i)
+ pvlan &= ~BIT(i);
+ }
+
+ b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
+ dev->ports[port].vlan_ctl_mask = pvlan;
+
+ pvid = b53_default_pvid(dev);
+
+ /* Make this port join all VLANs without VLAN entries */
+ if (is58xx(dev)) {
+ b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
+ reg |= BIT(port);
+ if (!(reg & BIT(cpu_port)))
+ reg |= BIT(cpu_port);
+ b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
+ } else {
+ b53_get_vlan_entry(dev, pvid, vl);
+ vl->members |= BIT(port) | BIT(cpu_port);
+ vl->untag |= BIT(port) | BIT(cpu_port);
+ b53_set_vlan_entry(dev, pvid, vl);
+ }
+}
+EXPORT_SYMBOL(b53_br_leave);
+
+void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
+{
+ struct b53_device *dev = ds->priv;
+ u8 hw_state;
+ u8 reg;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ hw_state = PORT_CTRL_DIS_STATE;
+ break;
+ case BR_STATE_LISTENING:
+ hw_state = PORT_CTRL_LISTEN_STATE;
+ break;
+ case BR_STATE_LEARNING:
+ hw_state = PORT_CTRL_LEARN_STATE;
+ break;
+ case BR_STATE_FORWARDING:
+ hw_state = PORT_CTRL_FWD_STATE;
+ break;
+ case BR_STATE_BLOCKING:
+ hw_state = PORT_CTRL_BLOCK_STATE;
+ break;
+ default:
+ dev_err(ds->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
+ reg &= ~PORT_CTRL_STP_STATE_MASK;
+ reg |= hw_state;
+ b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
+}
+EXPORT_SYMBOL(b53_br_set_stp_state);
+
+void b53_br_fast_age(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (b53_fast_age_port(dev, port))
+ dev_err(ds->dev, "fast ageing failed\n");
+}
+EXPORT_SYMBOL(b53_br_fast_age);
+
+int b53_br_flags_pre(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack)
+{
+ if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_br_flags_pre);
+
+int b53_br_flags(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack)
+{
+ if (flags.mask & BR_FLOOD)
+ b53_port_set_ucast_flood(ds->priv, port,
+ !!(flags.val & BR_FLOOD));
+ if (flags.mask & BR_MCAST_FLOOD)
+ b53_port_set_mcast_flood(ds->priv, port,
+ !!(flags.val & BR_MCAST_FLOOD));
+ if (flags.mask & BR_LEARNING)
+ b53_port_set_learning(ds->priv, port,
+ !!(flags.val & BR_LEARNING));
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_br_flags);
+
+static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
+{
+ /* Broadcom switches will accept enabling Broadcom tags on the
+ * following ports: 5, 7 and 8, any other port is not supported
+ */
+ switch (port) {
+ case B53_CPU_PORT_25:
+ case 7:
+ case B53_CPU_PORT:
+ return true;
+ }
+
+ return false;
+}
+
+static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol tag_protocol)
+{
+ bool ret = b53_possible_cpu_port(ds, port);
+
+ if (!ret) {
+ dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
+ port);
+ return ret;
+ }
+
+ switch (tag_protocol) {
+ case DSA_TAG_PROTO_BRCM:
+ case DSA_TAG_PROTO_BRCM_PREPEND:
+ dev_warn(ds->dev,
+ "Port %d is stacked to Broadcom tag switch\n", port);
+ ret = false;
+ break;
+ default:
+ ret = true;
+ break;
+ }
+
+ return ret;
+}
+
+enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mprot)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
+ dev->tag_protocol = DSA_TAG_PROTO_NONE;
+ goto out;
+ }
+
+ /* Older models require a different 6 byte tag */
+ if (is5325(dev) || is5365(dev) || is63xx(dev)) {
+ dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
+ goto out;
+ }
+
+ /* Broadcom BCM58xx chips have a flow accelerator on Port 8
+ * which requires us to use the prepended Broadcom tag type
+ */
+ if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
+ dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
+ goto out;
+ }
+
+ dev->tag_protocol = DSA_TAG_PROTO_BRCM;
+out:
+ return dev->tag_protocol;
+}
+EXPORT_SYMBOL(b53_get_tag_protocol);
+
+int b53_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
+ struct netlink_ext_ack *extack)
+{
+ struct b53_device *dev = ds->priv;
+ u16 reg, loc;
+
+ if (ingress)
+ loc = B53_IG_MIR_CTL;
+ else
+ loc = B53_EG_MIR_CTL;
+
+ b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
+ reg |= BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, loc, reg);
+
+ b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
+ reg &= ~CAP_PORT_MASK;
+ reg |= mirror->to_local_port;
+ reg |= MIRROR_EN;
+ b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_mirror_add);
+
+void b53_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct b53_device *dev = ds->priv;
+ bool loc_disable = false, other_loc_disable = false;
+ u16 reg, loc;
+
+ if (mirror->ingress)
+ loc = B53_IG_MIR_CTL;
+ else
+ loc = B53_EG_MIR_CTL;
+
+ /* Update the desired ingress/egress register */
+ b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
+ reg &= ~BIT(port);
+ if (!(reg & MIRROR_MASK))
+ loc_disable = true;
+ b53_write16(dev, B53_MGMT_PAGE, loc, reg);
+
+ /* Now look at the other one to know if we can disable mirroring
+ * entirely
+ */
+ if (mirror->ingress)
+ b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
+ else
+ b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
+ if (!(reg & MIRROR_MASK))
+ other_loc_disable = true;
+
+ b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
+ /* Both no longer have ports, let's disable mirroring */
+ if (loc_disable && other_loc_disable) {
+ reg &= ~MIRROR_EN;
+ reg &= ~mirror->to_local_port;
+ }
+ b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
+}
+EXPORT_SYMBOL(b53_mirror_del);
+
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+ struct b53_device *dev = ds->priv;
+ u16 reg;
+
+ b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
+ if (enable)
+ reg |= BIT(port);
+ else
+ reg &= ~BIT(port);
+ b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
+}
+EXPORT_SYMBOL(b53_eee_enable_set);
+
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+ int ret;
+
+ ret = phy_init_eee(phy, false);
+ if (ret)
+ return 0;
+
+ b53_eee_enable_set(ds, port, true);
+
+ return 1;
+}
+EXPORT_SYMBOL(b53_eee_init);
+
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+ struct b53_device *dev = ds->priv;
+ struct ethtool_eee *p = &dev->ports[port].eee;
+ u16 reg;
+
+ if (is5325(dev) || is5365(dev))
+ return -EOPNOTSUPP;
+
+ b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
+ e->eee_enabled = p->eee_enabled;
+ e->eee_active = !!(reg & BIT(port));
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_get_mac_eee);
+
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+ struct b53_device *dev = ds->priv;
+ struct ethtool_eee *p = &dev->ports[port].eee;
+
+ if (is5325(dev) || is5365(dev))
+ return -EOPNOTSUPP;
+
+ p->eee_enabled = e->eee_enabled;
+ b53_eee_enable_set(ds, port, e->eee_enabled);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_set_mac_eee);
+
+static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+ struct b53_device *dev = ds->priv;
+ bool enable_jumbo;
+ bool allow_10_100;
+
+ if (is5325(dev) || is5365(dev))
+ return -EOPNOTSUPP;
+
+ enable_jumbo = (mtu >= JMS_MIN_SIZE);
+ allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
+
+ return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
+}
+
+static int b53_get_max_mtu(struct dsa_switch *ds, int port)
+{
+ return JMS_MAX_SIZE;
+}
+
+static const struct dsa_switch_ops b53_switch_ops = {
+ .get_tag_protocol = b53_get_tag_protocol,
+ .setup = b53_setup,
+ .teardown = b53_teardown,
+ .get_strings = b53_get_strings,
+ .get_ethtool_stats = b53_get_ethtool_stats,
+ .get_sset_count = b53_get_sset_count,
+ .get_ethtool_phy_stats = b53_get_ethtool_phy_stats,
+ .phy_read = b53_phy_read16,
+ .phy_write = b53_phy_write16,
+ .adjust_link = b53_adjust_link,
+ .phylink_get_caps = b53_phylink_get_caps,
+ .phylink_mac_select_pcs = b53_phylink_mac_select_pcs,
+ .phylink_mac_config = b53_phylink_mac_config,
+ .phylink_mac_link_down = b53_phylink_mac_link_down,
+ .phylink_mac_link_up = b53_phylink_mac_link_up,
+ .port_enable = b53_enable_port,
+ .port_disable = b53_disable_port,
+ .get_mac_eee = b53_get_mac_eee,
+ .set_mac_eee = b53_set_mac_eee,
+ .port_bridge_join = b53_br_join,
+ .port_bridge_leave = b53_br_leave,
+ .port_pre_bridge_flags = b53_br_flags_pre,
+ .port_bridge_flags = b53_br_flags,
+ .port_stp_state_set = b53_br_set_stp_state,
+ .port_fast_age = b53_br_fast_age,
+ .port_vlan_filtering = b53_vlan_filtering,
+ .port_vlan_add = b53_vlan_add,
+ .port_vlan_del = b53_vlan_del,
+ .port_fdb_dump = b53_fdb_dump,
+ .port_fdb_add = b53_fdb_add,
+ .port_fdb_del = b53_fdb_del,
+ .port_mirror_add = b53_mirror_add,
+ .port_mirror_del = b53_mirror_del,
+ .port_mdb_add = b53_mdb_add,
+ .port_mdb_del = b53_mdb_del,
+ .port_max_mtu = b53_get_max_mtu,
+ .port_change_mtu = b53_change_mtu,
+};
+
+struct b53_chip_data {
+ u32 chip_id;
+ const char *dev_name;
+ u16 vlans;
+ u16 enabled_ports;
+ u8 imp_port;
+ u8 cpu_port;
+ u8 vta_regs[3];
+ u8 arl_bins;
+ u16 arl_buckets;
+ u8 duplex_reg;
+ u8 jumbo_pm_reg;
+ u8 jumbo_size_reg;
+};
+
+#define B53_VTA_REGS \
+ { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
+#define B53_VTA_REGS_9798 \
+ { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
+#define B53_VTA_REGS_63XX \
+ { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
+
+static const struct b53_chip_data b53_switch_chips[] = {
+ {
+ .chip_id = BCM5325_DEVICE_ID,
+ .dev_name = "BCM5325",
+ .vlans = 16,
+ .enabled_ports = 0x3f,
+ .arl_bins = 2,
+ .arl_buckets = 1024,
+ .imp_port = 5,
+ .duplex_reg = B53_DUPLEX_STAT_FE,
+ },
+ {
+ .chip_id = BCM5365_DEVICE_ID,
+ .dev_name = "BCM5365",
+ .vlans = 256,
+ .enabled_ports = 0x3f,
+ .arl_bins = 2,
+ .arl_buckets = 1024,
+ .imp_port = 5,
+ .duplex_reg = B53_DUPLEX_STAT_FE,
+ },
+ {
+ .chip_id = BCM5389_DEVICE_ID,
+ .dev_name = "BCM5389",
+ .vlans = 4096,
+ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM5395_DEVICE_ID,
+ .dev_name = "BCM5395",
+ .vlans = 4096,
+ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM5397_DEVICE_ID,
+ .dev_name = "BCM5397",
+ .vlans = 4096,
+ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS_9798,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM5398_DEVICE_ID,
+ .dev_name = "BCM5398",
+ .vlans = 4096,
+ .enabled_ports = 0x17f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS_9798,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM53115_DEVICE_ID,
+ .dev_name = "BCM53115",
+ .vlans = 4096,
+ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .vta_regs = B53_VTA_REGS,
+ .imp_port = 8,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM53125_DEVICE_ID,
+ .dev_name = "BCM53125",
+ .vlans = 4096,
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM53128_DEVICE_ID,
+ .dev_name = "BCM53128",
+ .vlans = 4096,
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM63XX_DEVICE_ID,
+ .dev_name = "BCM63xx",
+ .vlans = 4096,
+ .enabled_ports = 0, /* pdata must provide them */
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS_63XX,
+ .duplex_reg = B53_DUPLEX_STAT_63XX,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
+ },
+ {
+ .chip_id = BCM53010_DEVICE_ID,
+ .dev_name = "BCM53010",
+ .vlans = 4096,
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM53011_DEVICE_ID,
+ .dev_name = "BCM53011",
+ .vlans = 4096,
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM53012_DEVICE_ID,
+ .dev_name = "BCM53012",
+ .vlans = 4096,
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM53018_DEVICE_ID,
+ .dev_name = "BCM53018",
+ .vlans = 4096,
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM53019_DEVICE_ID,
+ .dev_name = "BCM53019",
+ .vlans = 4096,
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM58XX_DEVICE_ID,
+ .dev_name = "BCM585xx/586xx/88312",
+ .vlans = 4096,
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM583XX_DEVICE_ID,
+ .dev_name = "BCM583xx/11360",
+ .vlans = 4096,
+ .enabled_ports = 0x103,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ /* Starfighter 2 */
+ {
+ .chip_id = BCM4908_DEVICE_ID,
+ .dev_name = "BCM4908",
+ .vlans = 4096,
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 256,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM7445_DEVICE_ID,
+ .dev_name = "BCM7445",
+ .vlans = 4096,
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+ {
+ .chip_id = BCM7278_DEVICE_ID,
+ .dev_name = "BCM7278",
+ .vlans = 4096,
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 256,
+ .imp_port = 8,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
+};
+
+static int b53_switch_init(struct b53_device *dev)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
+ const struct b53_chip_data *chip = &b53_switch_chips[i];
+
+ if (chip->chip_id == dev->chip_id) {
+ if (!dev->enabled_ports)
+ dev->enabled_ports = chip->enabled_ports;
+ dev->name = chip->dev_name;
+ dev->duplex_reg = chip->duplex_reg;
+ dev->vta_regs[0] = chip->vta_regs[0];
+ dev->vta_regs[1] = chip->vta_regs[1];
+ dev->vta_regs[2] = chip->vta_regs[2];
+ dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+ dev->imp_port = chip->imp_port;
+ dev->num_vlans = chip->vlans;
+ dev->num_arl_bins = chip->arl_bins;
+ dev->num_arl_buckets = chip->arl_buckets;
+ break;
+ }
+ }
+
+ /* check which BCM5325x version we have */
+ if (is5325(dev)) {
+ u8 vc4;
+
+ b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
+
+ /* check reserved bits */
+ switch (vc4 & 3) {
+ case 1:
+ /* BCM5325E */
+ break;
+ case 3:
+ /* BCM5325F - do not use port 4 */
+ dev->enabled_ports &= ~BIT(4);
+ break;
+ default:
+/* On the BCM47XX SoCs this is the supported internal switch.*/
+#ifndef CONFIG_BCM47XX
+ /* BCM5325M */
+ return -EINVAL;
+#else
+ break;
+#endif
+ }
+ }
+
+ dev->num_ports = fls(dev->enabled_ports);
+
+ dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
+
+ /* Include non standard CPU port built-in PHYs to be probed */
+ if (is539x(dev) || is531x5(dev)) {
+ for (i = 0; i < dev->num_ports; i++) {
+ if (!(dev->ds->phys_mii_mask & BIT(i)) &&
+ !b53_possible_cpu_port(dev->ds, i))
+ dev->ds->phys_mii_mask |= BIT(i);
+ }
+ }
+
+ dev->ports = devm_kcalloc(dev->dev,
+ dev->num_ports, sizeof(struct b53_port),
+ GFP_KERNEL);
+ if (!dev->ports)
+ return -ENOMEM;
+
+ dev->vlans = devm_kcalloc(dev->dev,
+ dev->num_vlans, sizeof(struct b53_vlan),
+ GFP_KERNEL);
+ if (!dev->vlans)
+ return -ENOMEM;
+
+ dev->reset_gpio = b53_switch_get_reset_gpio(dev);
+ if (dev->reset_gpio >= 0) {
+ ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
+ GPIOF_OUT_INIT_HIGH, "robo_reset");
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+struct b53_device *b53_switch_alloc(struct device *base,
+ const struct b53_io_ops *ops,
+ void *priv)
+{
+ struct dsa_switch *ds;
+ struct b53_device *dev;
+
+ ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
+ if (!ds)
+ return NULL;
+
+ ds->dev = base;
+
+ dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ ds->priv = dev;
+ dev->dev = base;
+
+ dev->ds = ds;
+ dev->priv = priv;
+ dev->ops = ops;
+ ds->ops = &b53_switch_ops;
+ dev->vlan_enabled = true;
+ /* Let DSA handle the case were multiple bridges span the same switch
+ * device and different VLAN awareness settings are requested, which
+ * would be breaking filtering semantics for any of the other bridge
+ * devices. (not hardware supported)
+ */
+ ds->vlan_filtering_is_global = true;
+
+ mutex_init(&dev->reg_mutex);
+ mutex_init(&dev->stats_mutex);
+ mutex_init(&dev->arl_mutex);
+
+ return dev;
+}
+EXPORT_SYMBOL(b53_switch_alloc);
+
+int b53_switch_detect(struct b53_device *dev)
+{
+ u32 id32;
+ u16 tmp;
+ u8 id8;
+ int ret;
+
+ ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
+ if (ret)
+ return ret;
+
+ switch (id8) {
+ case 0:
+ /* BCM5325 and BCM5365 do not have this register so reads
+ * return 0. But the read operation did succeed, so assume this
+ * is one of them.
+ *
+ * Next check if we can write to the 5325's VTA register; for
+ * 5365 it is read only.
+ */
+ b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
+ b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
+
+ if (tmp == 0xf)
+ dev->chip_id = BCM5325_DEVICE_ID;
+ else
+ dev->chip_id = BCM5365_DEVICE_ID;
+ break;
+ case BCM5389_DEVICE_ID:
+ case BCM5395_DEVICE_ID:
+ case BCM5397_DEVICE_ID:
+ case BCM5398_DEVICE_ID:
+ dev->chip_id = id8;
+ break;
+ default:
+ ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
+ if (ret)
+ return ret;
+
+ switch (id32) {
+ case BCM53115_DEVICE_ID:
+ case BCM53125_DEVICE_ID:
+ case BCM53128_DEVICE_ID:
+ case BCM53010_DEVICE_ID:
+ case BCM53011_DEVICE_ID:
+ case BCM53012_DEVICE_ID:
+ case BCM53018_DEVICE_ID:
+ case BCM53019_DEVICE_ID:
+ dev->chip_id = id32;
+ break;
+ default:
+ dev_err(dev->dev,
+ "unsupported switch detected (BCM53%02x/BCM%x)\n",
+ id8, id32);
+ return -ENODEV;
+ }
+ }
+
+ if (dev->chip_id == BCM5325_DEVICE_ID)
+ return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
+ &dev->core_rev);
+ else
+ return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
+ &dev->core_rev);
+}
+EXPORT_SYMBOL(b53_switch_detect);
+
+int b53_switch_register(struct b53_device *dev)
+{
+ int ret;
+
+ if (dev->pdata) {
+ dev->chip_id = dev->pdata->chip_id;
+ dev->enabled_ports = dev->pdata->enabled_ports;
+ }
+
+ if (!dev->chip_id && b53_switch_detect(dev))
+ return -EINVAL;
+
+ ret = b53_switch_init(dev);
+ if (ret)
+ return ret;
+
+ dev_info(dev->dev, "found switch: %s, rev %i\n",
+ dev->name, dev->core_rev);
+
+ return dsa_register_switch(dev->ds);
+}
+EXPORT_SYMBOL(b53_switch_register);
+
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 switch library");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c
new file mode 100644
index 000000000..6ddc03b58
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_mdio.c
@@ -0,0 +1,399 @@
+/*
+ * B53 register access through MII registers
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/brcmphy.h>
+#include <linux/rtnetlink.h>
+#include <net/dsa.h>
+
+#include "b53_priv.h"
+
+/* MII registers */
+#define REG_MII_PAGE 0x10 /* MII Page register */
+#define REG_MII_ADDR 0x11 /* MII Address register */
+#define REG_MII_DATA0 0x18 /* MII Data register 0 */
+#define REG_MII_DATA1 0x19 /* MII Data register 1 */
+#define REG_MII_DATA2 0x1a /* MII Data register 2 */
+#define REG_MII_DATA3 0x1b /* MII Data register 3 */
+
+#define REG_MII_PAGE_ENABLE BIT(0)
+#define REG_MII_ADDR_WRITE BIT(0)
+#define REG_MII_ADDR_READ BIT(1)
+
+static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
+{
+ int i;
+ u16 v;
+ int ret;
+ struct mii_bus *bus = dev->priv;
+
+ if (dev->current_page != page) {
+ /* set page number */
+ v = (page << 8) | REG_MII_PAGE_ENABLE;
+ ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_PAGE, v);
+ if (ret)
+ return ret;
+ dev->current_page = page;
+ }
+
+ /* set register address */
+ v = (reg << 8) | op;
+ ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v);
+ if (ret)
+ return ret;
+
+ /* check if operation completed */
+ for (i = 0; i < 5; ++i) {
+ v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_ADDR);
+ if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
+ break;
+ usleep_range(10, 100);
+ }
+
+ if (WARN_ON(i == 5))
+ return -EIO;
+
+ return 0;
+}
+
+static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+ struct mii_bus *bus = dev->priv;
+ int ret;
+
+ ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+ if (ret)
+ return ret;
+
+ *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0) & 0xff;
+
+ return 0;
+}
+
+static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+ struct mii_bus *bus = dev->priv;
+ int ret;
+
+ ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+ if (ret)
+ return ret;
+
+ *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
+
+ return 0;
+}
+
+static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+ struct mii_bus *bus = dev->priv;
+ int ret;
+
+ ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+ if (ret)
+ return ret;
+
+ *val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
+ *val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA1) << 16;
+
+ return 0;
+}
+
+static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ struct mii_bus *bus = dev->priv;
+ u64 temp = 0;
+ int i;
+ int ret;
+
+ ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+ if (ret)
+ return ret;
+
+ for (i = 2; i >= 0; i--) {
+ temp <<= 16;
+ temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0 + i);
+ }
+
+ *val = temp;
+
+ return 0;
+}
+
+static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ struct mii_bus *bus = dev->priv;
+ u64 temp = 0;
+ int i;
+ int ret;
+
+ ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+ if (ret)
+ return ret;
+
+ for (i = 3; i >= 0; i--) {
+ temp <<= 16;
+ temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0 + i);
+ }
+
+ *val = temp;
+
+ return 0;
+}
+
+static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+ struct mii_bus *bus = dev->priv;
+ int ret;
+
+ ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0, value);
+ if (ret)
+ return ret;
+
+ return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
+ u16 value)
+{
+ struct mii_bus *bus = dev->priv;
+ int ret;
+
+ ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0, value);
+ if (ret)
+ return ret;
+
+ return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
+ u32 value)
+{
+ struct mii_bus *bus = dev->priv;
+ unsigned int i;
+ u32 temp = value;
+
+ for (i = 0; i < 2; i++) {
+ int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0 + i,
+ temp & 0xffff);
+ if (ret)
+ return ret;
+ temp >>= 16;
+ }
+
+ return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
+ u64 value)
+{
+ struct mii_bus *bus = dev->priv;
+ unsigned int i;
+ u64 temp = value;
+
+ for (i = 0; i < 3; i++) {
+ int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0 + i,
+ temp & 0xffff);
+ if (ret)
+ return ret;
+ temp >>= 16;
+ }
+
+ return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
+ u64 value)
+{
+ struct mii_bus *bus = dev->priv;
+ unsigned int i;
+ u64 temp = value;
+
+ for (i = 0; i < 4; i++) {
+ int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
+ REG_MII_DATA0 + i,
+ temp & 0xffff);
+ if (ret)
+ return ret;
+ temp >>= 16;
+ }
+
+ return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg,
+ u16 *value)
+{
+ struct mii_bus *bus = dev->priv;
+
+ *value = mdiobus_read_nested(bus, addr, reg);
+
+ return 0;
+}
+
+static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg,
+ u16 value)
+{
+ struct mii_bus *bus = dev->bus;
+
+ return mdiobus_write_nested(bus, addr, reg, value);
+}
+
+static const struct b53_io_ops b53_mdio_ops = {
+ .read8 = b53_mdio_read8,
+ .read16 = b53_mdio_read16,
+ .read32 = b53_mdio_read32,
+ .read48 = b53_mdio_read48,
+ .read64 = b53_mdio_read64,
+ .write8 = b53_mdio_write8,
+ .write16 = b53_mdio_write16,
+ .write32 = b53_mdio_write32,
+ .write48 = b53_mdio_write48,
+ .write64 = b53_mdio_write64,
+ .phy_read16 = b53_mdio_phy_read16,
+ .phy_write16 = b53_mdio_phy_write16,
+};
+
+#define B53_BRCM_OUI_1 0x0143bc00
+#define B53_BRCM_OUI_2 0x03625c00
+#define B53_BRCM_OUI_3 0x00406000
+#define B53_BRCM_OUI_4 0x01410c00
+
+static int b53_mdio_probe(struct mdio_device *mdiodev)
+{
+ struct b53_device *dev;
+ u32 phy_id;
+ int ret;
+
+ /* allow the generic PHY driver to take over the non-management MDIO
+ * addresses
+ */
+ if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) {
+ dev_err(&mdiodev->dev, "leaving address %d to PHY\n",
+ mdiodev->addr);
+ return -ENODEV;
+ }
+
+ /* read the first port's id */
+ phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16;
+ phy_id |= mdiobus_read(mdiodev->bus, 0, 3);
+
+ /* BCM5325, BCM539x (OUI_1)
+ * BCM53125, BCM53128 (OUI_2)
+ * BCM5365 (OUI_3)
+ */
+ if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
+ (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
+ (phy_id & 0xfffffc00) != B53_BRCM_OUI_3 &&
+ (phy_id & 0xfffffc00) != B53_BRCM_OUI_4) {
+ dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
+ return -ENODEV;
+ }
+
+ /* First probe will come from SWITCH_MDIO controller on the 7445D0
+ * switch, which will conflict with the 7445 integrated switch
+ * pseudo-phy (we end-up programming both). In that case, we return
+ * -EPROBE_DEFER for the first time we get here, and wait until we come
+ * back with the slave MDIO bus which has the correct indirection
+ * layer setup
+ */
+ if (of_machine_is_compatible("brcm,bcm7445d0") &&
+ strcmp(mdiodev->bus->name, "sf2 slave mii"))
+ return -EPROBE_DEFER;
+
+ dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus);
+ if (!dev)
+ return -ENOMEM;
+
+ /* we don't use page 0xff, so force a page set */
+ dev->current_page = 0xff;
+ dev->bus = mdiodev->bus;
+
+ dev_set_drvdata(&mdiodev->dev, dev);
+
+ ret = b53_switch_register(dev);
+ if (ret) {
+ dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static void b53_mdio_remove(struct mdio_device *mdiodev)
+{
+ struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
+
+ if (!dev)
+ return;
+
+ b53_switch_remove(dev);
+}
+
+static void b53_mdio_shutdown(struct mdio_device *mdiodev)
+{
+ struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
+
+ if (!dev)
+ return;
+
+ b53_switch_shutdown(dev);
+
+ dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static const struct of_device_id b53_of_match[] = {
+ { .compatible = "brcm,bcm5325" },
+ { .compatible = "brcm,bcm53115" },
+ { .compatible = "brcm,bcm53125" },
+ { .compatible = "brcm,bcm53128" },
+ { .compatible = "brcm,bcm5365" },
+ { .compatible = "brcm,bcm5389" },
+ { .compatible = "brcm,bcm5395" },
+ { .compatible = "brcm,bcm5397" },
+ { .compatible = "brcm,bcm5398" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, b53_of_match);
+
+static struct mdio_driver b53_mdio_driver = {
+ .probe = b53_mdio_probe,
+ .remove = b53_mdio_remove,
+ .shutdown = b53_mdio_shutdown,
+ .mdiodrv.driver = {
+ .name = "bcm53xx",
+ .of_match_table = b53_of_match,
+ },
+};
+mdio_module_driver(b53_mdio_driver);
+
+MODULE_DESCRIPTION("B53 MDIO access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
new file mode 100644
index 000000000..d9434ed94
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -0,0 +1,368 @@
+/*
+ * B53 register access through memory mapped registers
+ *
+ * Copyright (C) 2012-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/b53.h>
+
+#include "b53_priv.h"
+
+struct b53_mmap_priv {
+ void __iomem *regs;
+};
+
+static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+
+ *val = readb(regs + (page << 8) + reg);
+
+ return 0;
+}
+
+static int b53_mmap_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+
+ if (WARN_ON(reg % 2))
+ return -EINVAL;
+
+ if (dev->pdata && dev->pdata->big_endian)
+ *val = ioread16be(regs + (page << 8) + reg);
+ else
+ *val = readw(regs + (page << 8) + reg);
+
+ return 0;
+}
+
+static int b53_mmap_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+
+ if (WARN_ON(reg % 4))
+ return -EINVAL;
+
+ if (dev->pdata && dev->pdata->big_endian)
+ *val = ioread32be(regs + (page << 8) + reg);
+ else
+ *val = readl(regs + (page << 8) + reg);
+
+ return 0;
+}
+
+static int b53_mmap_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+
+ if (WARN_ON(reg % 2))
+ return -EINVAL;
+
+ if (reg % 4) {
+ u16 lo;
+ u32 hi;
+
+ if (dev->pdata && dev->pdata->big_endian) {
+ lo = ioread16be(regs + (page << 8) + reg);
+ hi = ioread32be(regs + (page << 8) + reg + 2);
+ } else {
+ lo = readw(regs + (page << 8) + reg);
+ hi = readl(regs + (page << 8) + reg + 2);
+ }
+
+ *val = ((u64)hi << 16) | lo;
+ } else {
+ u32 lo;
+ u16 hi;
+
+ if (dev->pdata && dev->pdata->big_endian) {
+ lo = ioread32be(regs + (page << 8) + reg);
+ hi = ioread16be(regs + (page << 8) + reg + 4);
+ } else {
+ lo = readl(regs + (page << 8) + reg);
+ hi = readw(regs + (page << 8) + reg + 4);
+ }
+
+ *val = ((u64)hi << 32) | lo;
+ }
+
+ return 0;
+}
+
+static int b53_mmap_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+ u32 hi, lo;
+
+ if (WARN_ON(reg % 4))
+ return -EINVAL;
+
+ if (dev->pdata && dev->pdata->big_endian) {
+ lo = ioread32be(regs + (page << 8) + reg);
+ hi = ioread32be(regs + (page << 8) + reg + 4);
+ } else {
+ lo = readl(regs + (page << 8) + reg);
+ hi = readl(regs + (page << 8) + reg + 4);
+ }
+
+ *val = ((u64)hi << 32) | lo;
+
+ return 0;
+}
+
+static int b53_mmap_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+
+ writeb(value, regs + (page << 8) + reg);
+
+ return 0;
+}
+
+static int b53_mmap_write16(struct b53_device *dev, u8 page, u8 reg,
+ u16 value)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+
+ if (WARN_ON(reg % 2))
+ return -EINVAL;
+
+ if (dev->pdata && dev->pdata->big_endian)
+ iowrite16be(value, regs + (page << 8) + reg);
+ else
+ writew(value, regs + (page << 8) + reg);
+
+ return 0;
+}
+
+static int b53_mmap_write32(struct b53_device *dev, u8 page, u8 reg,
+ u32 value)
+{
+ struct b53_mmap_priv *priv = dev->priv;
+ void __iomem *regs = priv->regs;
+
+ if (WARN_ON(reg % 4))
+ return -EINVAL;
+
+ if (dev->pdata && dev->pdata->big_endian)
+ iowrite32be(value, regs + (page << 8) + reg);
+ else
+ writel(value, regs + (page << 8) + reg);
+
+ return 0;
+}
+
+static int b53_mmap_write48(struct b53_device *dev, u8 page, u8 reg,
+ u64 value)
+{
+ if (WARN_ON(reg % 2))
+ return -EINVAL;
+
+ if (reg % 4) {
+ u32 hi = (u32)(value >> 16);
+ u16 lo = (u16)value;
+
+ b53_mmap_write16(dev, page, reg, lo);
+ b53_mmap_write32(dev, page, reg + 2, hi);
+ } else {
+ u16 hi = (u16)(value >> 32);
+ u32 lo = (u32)value;
+
+ b53_mmap_write32(dev, page, reg, lo);
+ b53_mmap_write16(dev, page, reg + 4, hi);
+ }
+
+ return 0;
+}
+
+static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg,
+ u64 value)
+{
+ u32 hi, lo;
+
+ hi = upper_32_bits(value);
+ lo = lower_32_bits(value);
+
+ if (WARN_ON(reg % 4))
+ return -EINVAL;
+
+ b53_mmap_write32(dev, page, reg, lo);
+ b53_mmap_write32(dev, page, reg + 4, hi);
+
+ return 0;
+}
+
+static int b53_mmap_phy_read16(struct b53_device *dev, int addr, int reg,
+ u16 *value)
+{
+ return -EIO;
+}
+
+static int b53_mmap_phy_write16(struct b53_device *dev, int addr, int reg,
+ u16 value)
+{
+ return -EIO;
+}
+
+static const struct b53_io_ops b53_mmap_ops = {
+ .read8 = b53_mmap_read8,
+ .read16 = b53_mmap_read16,
+ .read32 = b53_mmap_read32,
+ .read48 = b53_mmap_read48,
+ .read64 = b53_mmap_read64,
+ .write8 = b53_mmap_write8,
+ .write16 = b53_mmap_write16,
+ .write32 = b53_mmap_write32,
+ .write48 = b53_mmap_write48,
+ .write64 = b53_mmap_write64,
+ .phy_read16 = b53_mmap_phy_read16,
+ .phy_write16 = b53_mmap_phy_write16,
+};
+
+static int b53_mmap_probe_of(struct platform_device *pdev,
+ struct b53_platform_data **ppdata)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *of_ports, *of_port;
+ struct device *dev = &pdev->dev;
+ struct b53_platform_data *pdata;
+ void __iomem *mem;
+
+ mem = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(mem))
+ return PTR_ERR(mem);
+
+ pdata = devm_kzalloc(dev, sizeof(struct b53_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->regs = mem;
+ pdata->chip_id = BCM63XX_DEVICE_ID;
+ pdata->big_endian = of_property_read_bool(np, "big-endian");
+
+ of_ports = of_get_child_by_name(np, "ports");
+ if (!of_ports) {
+ dev_err(dev, "no ports child node found\n");
+ return -EINVAL;
+ }
+
+ for_each_available_child_of_node(of_ports, of_port) {
+ u32 reg;
+
+ if (of_property_read_u32(of_port, "reg", &reg))
+ continue;
+
+ if (reg < B53_N_PORTS)
+ pdata->enabled_ports |= BIT(reg);
+ }
+
+ of_node_put(of_ports);
+ *ppdata = pdata;
+
+ return 0;
+}
+
+static int b53_mmap_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct b53_platform_data *pdata = pdev->dev.platform_data;
+ struct b53_mmap_priv *priv;
+ struct b53_device *dev;
+ int ret;
+
+ if (!pdata && np) {
+ ret = b53_mmap_probe_of(pdev, &pdata);
+ if (ret) {
+ dev_err(&pdev->dev, "OF probe error\n");
+ return ret;
+ }
+ }
+
+ if (!pdata)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->regs = pdata->regs;
+
+ dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, priv);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->pdata = pdata;
+
+ platform_set_drvdata(pdev, dev);
+
+ return b53_switch_register(dev);
+}
+
+static int b53_mmap_remove(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+
+ if (dev)
+ b53_switch_remove(dev);
+
+ return 0;
+}
+
+static void b53_mmap_shutdown(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+
+ if (dev)
+ b53_switch_shutdown(dev);
+
+ platform_set_drvdata(pdev, NULL);
+}
+
+static const struct of_device_id b53_mmap_of_table[] = {
+ { .compatible = "brcm,bcm3384-switch" },
+ { .compatible = "brcm,bcm6328-switch" },
+ { .compatible = "brcm,bcm6368-switch" },
+ { .compatible = "brcm,bcm63xx-switch" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, b53_mmap_of_table);
+
+static struct platform_driver b53_mmap_driver = {
+ .probe = b53_mmap_probe,
+ .remove = b53_mmap_remove,
+ .shutdown = b53_mmap_shutdown,
+ .driver = {
+ .name = "b53-switch",
+ .of_match_table = b53_mmap_of_table,
+ },
+};
+
+module_platform_driver(b53_mmap_driver);
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 MMAP access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
new file mode 100644
index 000000000..795cbffd5
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -0,0 +1,392 @@
+/*
+ * B53 common definitions
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_PRIV_H
+#define __B53_PRIV_H
+
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/phylink.h>
+#include <linux/etherdevice.h>
+#include <net/dsa.h>
+
+#include "b53_regs.h"
+
+struct b53_device;
+struct net_device;
+
+struct b53_io_ops {
+ int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value);
+ int (*read16)(struct b53_device *dev, u8 page, u8 reg, u16 *value);
+ int (*read32)(struct b53_device *dev, u8 page, u8 reg, u32 *value);
+ int (*read48)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
+ int (*read64)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
+ int (*write8)(struct b53_device *dev, u8 page, u8 reg, u8 value);
+ int (*write16)(struct b53_device *dev, u8 page, u8 reg, u16 value);
+ int (*write32)(struct b53_device *dev, u8 page, u8 reg, u32 value);
+ int (*write48)(struct b53_device *dev, u8 page, u8 reg, u64 value);
+ int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value);
+ int (*phy_read16)(struct b53_device *dev, int addr, int reg, u16 *value);
+ int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
+ int (*irq_enable)(struct b53_device *dev, int port);
+ void (*irq_disable)(struct b53_device *dev, int port);
+ void (*phylink_get_caps)(struct b53_device *dev, int port,
+ struct phylink_config *config);
+ struct phylink_pcs *(*phylink_mac_select_pcs)(struct b53_device *dev,
+ int port,
+ phy_interface_t interface);
+ u8 (*serdes_map_lane)(struct b53_device *dev, int port);
+ void (*serdes_link_set)(struct b53_device *dev, int port,
+ unsigned int mode, phy_interface_t interface,
+ bool link_up);
+};
+
+#define B53_INVALID_LANE 0xff
+
+enum {
+ BCM4908_DEVICE_ID = 0x4908,
+ BCM5325_DEVICE_ID = 0x25,
+ BCM5365_DEVICE_ID = 0x65,
+ BCM5389_DEVICE_ID = 0x89,
+ BCM5395_DEVICE_ID = 0x95,
+ BCM5397_DEVICE_ID = 0x97,
+ BCM5398_DEVICE_ID = 0x98,
+ BCM53115_DEVICE_ID = 0x53115,
+ BCM53125_DEVICE_ID = 0x53125,
+ BCM53128_DEVICE_ID = 0x53128,
+ BCM63XX_DEVICE_ID = 0x6300,
+ BCM53010_DEVICE_ID = 0x53010,
+ BCM53011_DEVICE_ID = 0x53011,
+ BCM53012_DEVICE_ID = 0x53012,
+ BCM53018_DEVICE_ID = 0x53018,
+ BCM53019_DEVICE_ID = 0x53019,
+ BCM58XX_DEVICE_ID = 0x5800,
+ BCM583XX_DEVICE_ID = 0x58300,
+ BCM7445_DEVICE_ID = 0x7445,
+ BCM7278_DEVICE_ID = 0x7278,
+};
+
+struct b53_pcs {
+ struct phylink_pcs pcs;
+ struct b53_device *dev;
+ u8 lane;
+};
+
+#define B53_N_PORTS 9
+#define B53_N_PORTS_25 6
+#define B53_N_PCS 2
+
+struct b53_port {
+ u16 vlan_ctl_mask;
+ struct ethtool_eee eee;
+};
+
+struct b53_vlan {
+ u16 members;
+ u16 untag;
+ bool valid;
+};
+
+struct b53_device {
+ struct dsa_switch *ds;
+ struct b53_platform_data *pdata;
+ const char *name;
+
+ struct mutex reg_mutex;
+ struct mutex stats_mutex;
+ struct mutex arl_mutex;
+ const struct b53_io_ops *ops;
+
+ /* chip specific data */
+ u32 chip_id;
+ u8 core_rev;
+ u8 vta_regs[3];
+ u8 duplex_reg;
+ u8 jumbo_pm_reg;
+ u8 jumbo_size_reg;
+ int reset_gpio;
+ u8 num_arl_bins;
+ u16 num_arl_buckets;
+ enum dsa_tag_protocol tag_protocol;
+
+ /* used ports mask */
+ u16 enabled_ports;
+ unsigned int imp_port;
+
+ /* connect specific data */
+ u8 current_page;
+ struct device *dev;
+ u8 serdes_lane;
+
+ /* Master MDIO bus we got probed from */
+ struct mii_bus *bus;
+
+ void *priv;
+
+ /* run time configuration */
+ bool enable_jumbo;
+
+ unsigned int num_vlans;
+ struct b53_vlan *vlans;
+ bool vlan_enabled;
+ unsigned int num_ports;
+ struct b53_port *ports;
+
+ struct b53_pcs pcs[B53_N_PCS];
+};
+
+#define b53_for_each_port(dev, i) \
+ for (i = 0; i < B53_N_PORTS; i++) \
+ if (dev->enabled_ports & BIT(i))
+
+
+static inline int is5325(struct b53_device *dev)
+{
+ return dev->chip_id == BCM5325_DEVICE_ID;
+}
+
+static inline int is5365(struct b53_device *dev)
+{
+#ifdef CONFIG_BCM47XX
+ return dev->chip_id == BCM5365_DEVICE_ID;
+#else
+ return 0;
+#endif
+}
+
+static inline int is5397_98(struct b53_device *dev)
+{
+ return dev->chip_id == BCM5397_DEVICE_ID ||
+ dev->chip_id == BCM5398_DEVICE_ID;
+}
+
+static inline int is539x(struct b53_device *dev)
+{
+ return dev->chip_id == BCM5395_DEVICE_ID ||
+ dev->chip_id == BCM5397_DEVICE_ID ||
+ dev->chip_id == BCM5398_DEVICE_ID;
+}
+
+static inline int is531x5(struct b53_device *dev)
+{
+ return dev->chip_id == BCM53115_DEVICE_ID ||
+ dev->chip_id == BCM53125_DEVICE_ID ||
+ dev->chip_id == BCM53128_DEVICE_ID;
+}
+
+static inline int is63xx(struct b53_device *dev)
+{
+ return dev->chip_id == BCM63XX_DEVICE_ID;
+}
+
+static inline int is5301x(struct b53_device *dev)
+{
+ return dev->chip_id == BCM53010_DEVICE_ID ||
+ dev->chip_id == BCM53011_DEVICE_ID ||
+ dev->chip_id == BCM53012_DEVICE_ID ||
+ dev->chip_id == BCM53018_DEVICE_ID ||
+ dev->chip_id == BCM53019_DEVICE_ID;
+}
+
+static inline int is58xx(struct b53_device *dev)
+{
+ return dev->chip_id == BCM58XX_DEVICE_ID ||
+ dev->chip_id == BCM583XX_DEVICE_ID ||
+ dev->chip_id == BCM7445_DEVICE_ID ||
+ dev->chip_id == BCM7278_DEVICE_ID;
+}
+
+#define B53_CPU_PORT_25 5
+#define B53_CPU_PORT 8
+
+static inline unsigned int b53_max_arl_entries(struct b53_device *dev)
+{
+ return dev->num_arl_buckets * dev->num_arl_bins;
+}
+
+struct b53_device *b53_switch_alloc(struct device *base,
+ const struct b53_io_ops *ops,
+ void *priv);
+
+int b53_switch_detect(struct b53_device *dev);
+
+int b53_switch_register(struct b53_device *dev);
+
+static inline void b53_switch_remove(struct b53_device *dev)
+{
+ dsa_unregister_switch(dev->ds);
+}
+
+static inline void b53_switch_shutdown(struct b53_device *dev)
+{
+ dsa_switch_shutdown(dev->ds);
+}
+
+#define b53_build_op(type_op_size, val_type) \
+static inline int b53_##type_op_size(struct b53_device *dev, u8 page, \
+ u8 reg, val_type val) \
+{ \
+ int ret; \
+ \
+ mutex_lock(&dev->reg_mutex); \
+ ret = dev->ops->type_op_size(dev, page, reg, val); \
+ mutex_unlock(&dev->reg_mutex); \
+ \
+ return ret; \
+}
+
+b53_build_op(read8, u8 *);
+b53_build_op(read16, u16 *);
+b53_build_op(read32, u32 *);
+b53_build_op(read48, u64 *);
+b53_build_op(read64, u64 *);
+
+b53_build_op(write8, u8);
+b53_build_op(write16, u16);
+b53_build_op(write32, u32);
+b53_build_op(write48, u64);
+b53_build_op(write64, u64);
+
+struct b53_arl_entry {
+ u16 port;
+ u8 mac[ETH_ALEN];
+ u16 vid;
+ u8 is_valid:1;
+ u8 is_age:1;
+ u8 is_static:1;
+};
+
+static inline void b53_arl_to_entry(struct b53_arl_entry *ent,
+ u64 mac_vid, u32 fwd_entry)
+{
+ memset(ent, 0, sizeof(*ent));
+ ent->port = fwd_entry & ARLTBL_DATA_PORT_ID_MASK;
+ ent->is_valid = !!(fwd_entry & ARLTBL_VALID);
+ ent->is_age = !!(fwd_entry & ARLTBL_AGE);
+ ent->is_static = !!(fwd_entry & ARLTBL_STATIC);
+ u64_to_ether_addr(mac_vid, ent->mac);
+ ent->vid = mac_vid >> ARLTBL_VID_S;
+}
+
+static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry,
+ const struct b53_arl_entry *ent)
+{
+ *mac_vid = ether_addr_to_u64(ent->mac);
+ *mac_vid |= (u64)(ent->vid & ARLTBL_VID_MASK) << ARLTBL_VID_S;
+ *fwd_entry = ent->port & ARLTBL_DATA_PORT_ID_MASK;
+ if (ent->is_valid)
+ *fwd_entry |= ARLTBL_VALID;
+ if (ent->is_static)
+ *fwd_entry |= ARLTBL_STATIC;
+ if (ent->is_age)
+ *fwd_entry |= ARLTBL_AGE;
+}
+
+#ifdef CONFIG_BCM47XX
+
+#include <linux/bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
+static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+ case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+ return 8;
+ default:
+ return bcm47xx_nvram_gpio_pin("robo_reset");
+ }
+}
+#else
+static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+{
+ return -ENOENT;
+}
+#endif
+
+/* Exported functions towards other drivers */
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port);
+int b53_configure_vlan(struct dsa_switch *ds);
+void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data);
+void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
+int b53_get_sset_count(struct dsa_switch *ds, int port, int sset);
+void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data);
+int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
+ bool *tx_fwd_offload, struct netlink_ext_ack *extack);
+void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge);
+void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state);
+void b53_br_fast_age(struct dsa_switch *ds, int port);
+int b53_br_flags_pre(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack);
+int b53_br_flags(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack);
+int b53_setup_devlink_resources(struct dsa_switch *ds);
+void b53_port_event(struct dsa_switch *ds, int port);
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state);
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface);
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause);
+int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack);
+int b53_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack);
+int b53_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+int b53_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db);
+int b53_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db);
+int b53_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data);
+int b53_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db);
+int b53_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db);
+int b53_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
+ struct netlink_ext_ack *extack);
+enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mprot);
+void b53_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror);
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+void b53_disable_port(struct dsa_switch *ds, int port);
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+
+#endif
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
new file mode 100644
index 000000000..b2c539a42
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -0,0 +1,527 @@
+/*
+ * B53 register definitions
+ *
+ * Copyright (C) 2004 Broadcom Corporation
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_REGS_H
+#define __B53_REGS_H
+
+/* Management Port (SMP) Page offsets */
+#define B53_CTRL_PAGE 0x00 /* Control */
+#define B53_STAT_PAGE 0x01 /* Status */
+#define B53_MGMT_PAGE 0x02 /* Management Mode */
+#define B53_MIB_AC_PAGE 0x03 /* MIB Autocast */
+#define B53_ARLCTRL_PAGE 0x04 /* ARL Control */
+#define B53_ARLIO_PAGE 0x05 /* ARL Access */
+#define B53_FRAMEBUF_PAGE 0x06 /* Management frame access */
+#define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */
+
+/* PHY Registers */
+#define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */
+#define B53_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */
+#define B53_ALL_PORT_PAGE 0x19 /* All ports MII (broadcast) */
+
+/* MIB registers */
+#define B53_MIB_PAGE(i) (0x20 + (i))
+
+/* Quality of Service (QoS) Registers */
+#define B53_QOS_PAGE 0x30
+
+/* Port VLAN Page */
+#define B53_PVLAN_PAGE 0x31
+
+/* VLAN Registers */
+#define B53_VLAN_PAGE 0x34
+
+/* Jumbo Frame Registers */
+#define B53_JUMBO_PAGE 0x40
+
+/* EEE Control Registers Page */
+#define B53_EEE_PAGE 0x92
+
+/* CFP Configuration Registers Page */
+#define B53_CFP_PAGE 0xa1
+
+/*************************************************************************
+ * Control Page registers
+ *************************************************************************/
+
+/* Port Control Register (8 bit) */
+#define B53_PORT_CTRL(i) (0x00 + (i))
+#define PORT_CTRL_RX_DISABLE BIT(0)
+#define PORT_CTRL_TX_DISABLE BIT(1)
+#define PORT_CTRL_RX_BCST_EN BIT(2) /* Broadcast RX (P8 only) */
+#define PORT_CTRL_RX_MCST_EN BIT(3) /* Multicast RX (P8 only) */
+#define PORT_CTRL_RX_UCST_EN BIT(4) /* Unicast RX (P8 only) */
+#define PORT_CTRL_STP_STATE_S 5
+#define PORT_CTRL_NO_STP (0 << PORT_CTRL_STP_STATE_S)
+#define PORT_CTRL_DIS_STATE (1 << PORT_CTRL_STP_STATE_S)
+#define PORT_CTRL_BLOCK_STATE (2 << PORT_CTRL_STP_STATE_S)
+#define PORT_CTRL_LISTEN_STATE (3 << PORT_CTRL_STP_STATE_S)
+#define PORT_CTRL_LEARN_STATE (4 << PORT_CTRL_STP_STATE_S)
+#define PORT_CTRL_FWD_STATE (5 << PORT_CTRL_STP_STATE_S)
+#define PORT_CTRL_STP_STATE_MASK (0x7 << PORT_CTRL_STP_STATE_S)
+
+/* SMP Control Register (8 bit) */
+#define B53_SMP_CTRL 0x0a
+
+/* Switch Mode Control Register (8 bit) */
+#define B53_SWITCH_MODE 0x0b
+#define SM_SW_FWD_MODE BIT(0) /* 1 = Managed Mode */
+#define SM_SW_FWD_EN BIT(1) /* Forwarding Enable */
+
+/* IMP Port state override register (8 bit) */
+#define B53_PORT_OVERRIDE_CTRL 0x0e
+#define PORT_OVERRIDE_LINK BIT(0)
+#define PORT_OVERRIDE_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */
+#define PORT_OVERRIDE_SPEED_S 2
+#define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S)
+#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S)
+#define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S)
+#define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */
+#define PORT_OVERRIDE_RX_FLOW BIT(4)
+#define PORT_OVERRIDE_TX_FLOW BIT(5)
+#define PORT_OVERRIDE_SPEED_2000M BIT(6) /* BCM5301X only, requires setting 1000M */
+#define PORT_OVERRIDE_EN BIT(7) /* Use the register contents */
+
+/* Power-down mode control */
+#define B53_PD_MODE_CTRL_25 0x0f
+
+/* IP Multicast control (8 bit) */
+#define B53_IP_MULTICAST_CTRL 0x21
+#define B53_IPMC_FWD_EN BIT(1)
+#define B53_UC_FWD_EN BIT(6)
+#define B53_MC_FWD_EN BIT(7)
+
+/* Switch control (8 bit) */
+#define B53_SWITCH_CTRL 0x22
+#define B53_MII_DUMB_FWDG_EN BIT(6)
+
+/* (16 bit) */
+#define B53_UC_FLOOD_MASK 0x32
+#define B53_MC_FLOOD_MASK 0x34
+#define B53_IPMC_FLOOD_MASK 0x36
+#define B53_DIS_LEARNING 0x3c
+
+/*
+ * Override Ports 0-7 State on devices with xMII interfaces (8 bit)
+ *
+ * For port 8 still use B53_PORT_OVERRIDE_CTRL
+ * Please note that not all ports are available on every hardware, e.g. BCM5301X
+ * don't include overriding port 6, BCM63xx also have some limitations.
+ */
+#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + (i))
+#define GMII_PO_LINK BIT(0)
+#define GMII_PO_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */
+#define GMII_PO_SPEED_S 2
+#define GMII_PO_SPEED_10M (0 << GMII_PO_SPEED_S)
+#define GMII_PO_SPEED_100M (1 << GMII_PO_SPEED_S)
+#define GMII_PO_SPEED_1000M (2 << GMII_PO_SPEED_S)
+#define GMII_PO_RX_FLOW BIT(4)
+#define GMII_PO_TX_FLOW BIT(5)
+#define GMII_PO_EN BIT(6) /* Use the register contents */
+#define GMII_PO_SPEED_2000M BIT(7) /* BCM5301X only, requires setting 1000M */
+
+#define B53_RGMII_CTRL_IMP 0x60
+#define RGMII_CTRL_ENABLE_GMII BIT(7)
+#define RGMII_CTRL_TIMING_SEL BIT(2)
+#define RGMII_CTRL_DLL_RXC BIT(1)
+#define RGMII_CTRL_DLL_TXC BIT(0)
+
+#define B53_RGMII_CTRL_P(i) (B53_RGMII_CTRL_IMP + (i))
+
+/* Software reset register (8 bit) */
+#define B53_SOFTRESET 0x79
+#define SW_RST BIT(7)
+#define EN_CH_RST BIT(6)
+#define EN_SW_RST BIT(4)
+
+/* Fast Aging Control register (8 bit) */
+#define B53_FAST_AGE_CTRL 0x88
+#define FAST_AGE_STATIC BIT(0)
+#define FAST_AGE_DYNAMIC BIT(1)
+#define FAST_AGE_PORT BIT(2)
+#define FAST_AGE_VLAN BIT(3)
+#define FAST_AGE_STP BIT(4)
+#define FAST_AGE_MC BIT(5)
+#define FAST_AGE_DONE BIT(7)
+
+/* Fast Aging Port Control register (8 bit) */
+#define B53_FAST_AGE_PORT_CTRL 0x89
+
+/* Fast Aging VID Control register (16 bit) */
+#define B53_FAST_AGE_VID_CTRL 0x8a
+
+/*************************************************************************
+ * Status Page registers
+ *************************************************************************/
+
+/* Link Status Summary Register (16bit) */
+#define B53_LINK_STAT 0x00
+
+/* Link Status Change Register (16 bit) */
+#define B53_LINK_STAT_CHANGE 0x02
+
+/* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */
+#define B53_SPEED_STAT 0x04
+#define SPEED_PORT_FE(reg, port) (((reg) >> (port)) & 1)
+#define SPEED_PORT_GE(reg, port) (((reg) >> 2 * (port)) & 3)
+#define SPEED_STAT_10M 0
+#define SPEED_STAT_100M 1
+#define SPEED_STAT_1000M 2
+
+/* Duplex Status Summary (16 bit) */
+#define B53_DUPLEX_STAT_FE 0x06
+#define B53_DUPLEX_STAT_GE 0x08
+#define B53_DUPLEX_STAT_63XX 0x0c
+
+/* Revision ID register for BCM5325 */
+#define B53_REV_ID_25 0x50
+
+/* Strap Value (48 bit) */
+#define B53_STRAP_VALUE 0x70
+#define SV_GMII_CTRL_115 BIT(27)
+
+/*************************************************************************
+ * Management Mode Page Registers
+ *************************************************************************/
+
+/* Global Management Config Register (8 bit) */
+#define B53_GLOBAL_CONFIG 0x00
+#define GC_RESET_MIB 0x01
+#define GC_RX_BPDU_EN 0x02
+#define GC_MIB_AC_HDR_EN 0x10
+#define GC_MIB_AC_EN 0x20
+#define GC_FRM_MGMT_PORT_M 0xC0
+#define GC_FRM_MGMT_PORT_04 0x00
+#define GC_FRM_MGMT_PORT_MII 0x80
+
+/* Broadcom Header control register (8 bit) */
+#define B53_BRCM_HDR 0x03
+#define BRCM_HDR_P8_EN BIT(0) /* Enable tagging on port 8 */
+#define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */
+#define BRCM_HDR_P7_EN BIT(2) /* Enable tagging on port 7 */
+
+/* Mirror capture control register (16 bit) */
+#define B53_MIR_CAP_CTL 0x10
+#define CAP_PORT_MASK 0xf
+#define BLK_NOT_MIR BIT(14)
+#define MIRROR_EN BIT(15)
+
+/* Ingress mirror control register (16 bit) */
+#define B53_IG_MIR_CTL 0x12
+#define MIRROR_MASK 0x1ff
+#define DIV_EN BIT(13)
+#define MIRROR_FILTER_MASK 0x3
+#define MIRROR_FILTER_SHIFT 14
+#define MIRROR_ALL 0
+#define MIRROR_DA 1
+#define MIRROR_SA 2
+
+/* Ingress mirror divider register (16 bit) */
+#define B53_IG_MIR_DIV 0x14
+#define IN_MIRROR_DIV_MASK 0x3ff
+
+/* Ingress mirror MAC address register (48 bit) */
+#define B53_IG_MIR_MAC 0x16
+
+/* Egress mirror control register (16 bit) */
+#define B53_EG_MIR_CTL 0x1C
+
+/* Egress mirror divider register (16 bit) */
+#define B53_EG_MIR_DIV 0x1E
+
+/* Egress mirror MAC address register (48 bit) */
+#define B53_EG_MIR_MAC 0x20
+
+/* Device ID register (8 or 32 bit) */
+#define B53_DEVICE_ID 0x30
+
+/* Revision ID register (8 bit) */
+#define B53_REV_ID 0x40
+
+/* Broadcom header RX control (16 bit) */
+#define B53_BRCM_HDR_RX_DIS 0x60
+
+/* Broadcom header TX control (16 bit) */
+#define B53_BRCM_HDR_TX_DIS 0x62
+
+/*************************************************************************
+ * ARL Access Page Registers
+ *************************************************************************/
+
+/* VLAN Table Access Register (8 bit) */
+#define B53_VT_ACCESS 0x80
+#define B53_VT_ACCESS_9798 0x60 /* for BCM5397/BCM5398 */
+#define B53_VT_ACCESS_63XX 0x60 /* for BCM6328/62/68 */
+#define VTA_CMD_WRITE 0
+#define VTA_CMD_READ 1
+#define VTA_CMD_CLEAR 2
+#define VTA_START_CMD BIT(7)
+
+/* VLAN Table Index Register (16 bit) */
+#define B53_VT_INDEX 0x81
+#define B53_VT_INDEX_9798 0x61
+#define B53_VT_INDEX_63XX 0x62
+
+/* VLAN Table Entry Register (32 bit) */
+#define B53_VT_ENTRY 0x83
+#define B53_VT_ENTRY_9798 0x63
+#define B53_VT_ENTRY_63XX 0x64
+#define VTE_MEMBERS 0x1ff
+#define VTE_UNTAG_S 9
+#define VTE_UNTAG (0x1ff << 9)
+
+/*************************************************************************
+ * ARL I/O Registers
+ *************************************************************************/
+
+/* ARL Table Read/Write Register (8 bit) */
+#define B53_ARLTBL_RW_CTRL 0x00
+#define ARLTBL_RW BIT(0)
+#define ARLTBL_IVL_SVL_SELECT BIT(6)
+#define ARLTBL_START_DONE BIT(7)
+
+/* MAC Address Index Register (48 bit) */
+#define B53_MAC_ADDR_IDX 0x02
+
+/* VLAN ID Index Register (16 bit) */
+#define B53_VLAN_ID_IDX 0x08
+
+/* ARL Table MAC/VID Entry N Registers (64 bit)
+ *
+ * BCM5325 and BCM5365 share most definitions below
+ */
+#define B53_ARLTBL_MAC_VID_ENTRY(n) ((0x10 * (n)) + 0x10)
+#define ARLTBL_MAC_MASK 0xffffffffffffULL
+#define ARLTBL_VID_S 48
+#define ARLTBL_VID_MASK_25 0xff
+#define ARLTBL_VID_MASK 0xfff
+#define ARLTBL_DATA_PORT_ID_S_25 48
+#define ARLTBL_DATA_PORT_ID_MASK_25 0xf
+#define ARLTBL_AGE_25 BIT(61)
+#define ARLTBL_STATIC_25 BIT(62)
+#define ARLTBL_VALID_25 BIT(63)
+
+/* ARL Table Data Entry N Registers (32 bit) */
+#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18)
+#define ARLTBL_DATA_PORT_ID_MASK 0x1ff
+#define ARLTBL_TC(tc) ((3 & tc) << 11)
+#define ARLTBL_AGE BIT(14)
+#define ARLTBL_STATIC BIT(15)
+#define ARLTBL_VALID BIT(16)
+
+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES 4
+
+/* ARL Search Control Register (8 bit) */
+#define B53_ARL_SRCH_CTL 0x50
+#define B53_ARL_SRCH_CTL_25 0x20
+#define ARL_SRCH_VLID BIT(0)
+#define ARL_SRCH_STDN BIT(7)
+
+/* ARL Search Address Register (16 bit) */
+#define B53_ARL_SRCH_ADDR 0x51
+#define B53_ARL_SRCH_ADDR_25 0x22
+#define B53_ARL_SRCH_ADDR_65 0x24
+#define ARL_ADDR_MASK GENMASK(14, 0)
+
+/* ARL Search MAC/VID Result (64 bit) */
+#define B53_ARL_SRCH_RSTL_0_MACVID 0x60
+
+/* Single register search result on 5325 */
+#define B53_ARL_SRCH_RSTL_0_MACVID_25 0x24
+/* Single register search result on 5365 */
+#define B53_ARL_SRCH_RSTL_0_MACVID_65 0x30
+
+/* ARL Search Data Result (32 bit) */
+#define B53_ARL_SRCH_RSTL_0 0x68
+
+#define B53_ARL_SRCH_RSTL_MACVID(x) (B53_ARL_SRCH_RSTL_0_MACVID + ((x) * 0x10))
+#define B53_ARL_SRCH_RSTL(x) (B53_ARL_SRCH_RSTL_0 + ((x) * 0x10))
+
+/*************************************************************************
+ * Port VLAN Registers
+ *************************************************************************/
+
+/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
+#define B53_PVLAN_PORT_MASK(i) ((i) * 2)
+
+/* Join all VLANs register (16 bit) */
+#define B53_JOIN_ALL_VLAN_EN 0x50
+
+/*************************************************************************
+ * 802.1Q Page Registers
+ *************************************************************************/
+
+/* Global QoS Control (8 bit) */
+#define B53_QOS_GLOBAL_CTL 0x00
+
+/* Enable 802.1Q for individual Ports (16 bit) */
+#define B53_802_1P_EN 0x04
+
+/*************************************************************************
+ * VLAN Page Registers
+ *************************************************************************/
+
+/* VLAN Control 0 (8 bit) */
+#define B53_VLAN_CTRL0 0x00
+#define VC0_8021PF_CTRL_MASK 0x3
+#define VC0_8021PF_CTRL_NONE 0x0
+#define VC0_8021PF_CTRL_CHANGE_PRI 0x1
+#define VC0_8021PF_CTRL_CHANGE_VID 0x2
+#define VC0_8021PF_CTRL_CHANGE_BOTH 0x3
+#define VC0_8021QF_CTRL_MASK 0xc
+#define VC0_8021QF_CTRL_CHANGE_PRI 0x1
+#define VC0_8021QF_CTRL_CHANGE_VID 0x2
+#define VC0_8021QF_CTRL_CHANGE_BOTH 0x3
+#define VC0_RESERVED_1 BIT(1)
+#define VC0_DROP_VID_MISS BIT(4)
+#define VC0_VID_HASH_VID BIT(5)
+#define VC0_VID_CHK_EN BIT(6) /* Use VID,DA or VID,SA */
+#define VC0_VLAN_EN BIT(7) /* 802.1Q VLAN Enabled */
+
+/* VLAN Control 1 (8 bit) */
+#define B53_VLAN_CTRL1 0x01
+#define VC1_RX_MCST_TAG_EN BIT(1)
+#define VC1_RX_MCST_FWD_EN BIT(2)
+#define VC1_RX_MCST_UNTAG_EN BIT(3)
+
+/* VLAN Control 2 (8 bit) */
+#define B53_VLAN_CTRL2 0x02
+
+/* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */
+#define B53_VLAN_CTRL3 0x03
+#define B53_VLAN_CTRL3_63XX 0x04
+#define VC3_MAXSIZE_1532 BIT(6) /* 5325 only */
+#define VC3_HIGH_8BIT_EN BIT(7) /* 5325 only */
+
+/* VLAN Control 4 (8 bit) */
+#define B53_VLAN_CTRL4 0x05
+#define B53_VLAN_CTRL4_25 0x04
+#define B53_VLAN_CTRL4_63XX 0x06
+#define VC4_ING_VID_CHECK_S 6
+#define VC4_ING_VID_CHECK_MASK (0x3 << VC4_ING_VID_CHECK_S)
+#define VC4_ING_VID_VIO_FWD 0 /* forward, but do not learn */
+#define VC4_ING_VID_VIO_DROP 1 /* drop VID violations */
+#define VC4_NO_ING_VID_CHK 2 /* do not check */
+#define VC4_ING_VID_VIO_TO_IMP 3 /* redirect to MII port */
+
+/* VLAN Control 5 (8 bit) */
+#define B53_VLAN_CTRL5 0x06
+#define B53_VLAN_CTRL5_25 0x05
+#define B53_VLAN_CTRL5_63XX 0x07
+#define VC5_VID_FFF_EN BIT(2)
+#define VC5_DROP_VTABLE_MISS BIT(3)
+
+/* VLAN Control 6 (8 bit) */
+#define B53_VLAN_CTRL6 0x07
+#define B53_VLAN_CTRL6_63XX 0x08
+
+/* VLAN Table Access Register (16 bit) */
+#define B53_VLAN_TABLE_ACCESS_25 0x06 /* BCM5325E/5350 */
+#define B53_VLAN_TABLE_ACCESS_65 0x08 /* BCM5365 */
+#define VTA_VID_LOW_MASK_25 0xf
+#define VTA_VID_LOW_MASK_65 0xff
+#define VTA_VID_HIGH_S_25 4
+#define VTA_VID_HIGH_S_65 8
+#define VTA_VID_HIGH_MASK_25 (0xff << VTA_VID_HIGH_S_25E)
+#define VTA_VID_HIGH_MASK_65 (0xf << VTA_VID_HIGH_S_65)
+#define VTA_RW_STATE BIT(12)
+#define VTA_RW_STATE_RD 0
+#define VTA_RW_STATE_WR BIT(12)
+#define VTA_RW_OP_EN BIT(13)
+
+/* VLAN Read/Write Registers for (16/32 bit) */
+#define B53_VLAN_WRITE_25 0x08
+#define B53_VLAN_WRITE_65 0x0a
+#define B53_VLAN_READ 0x0c
+#define VA_MEMBER_MASK 0x3f
+#define VA_UNTAG_S_25 6
+#define VA_UNTAG_MASK_25 0x3f
+#define VA_UNTAG_S_65 7
+#define VA_UNTAG_MASK_65 0x1f
+#define VA_VID_HIGH_S 12
+#define VA_VID_HIGH_MASK (0xffff << VA_VID_HIGH_S)
+#define VA_VALID_25 BIT(20)
+#define VA_VALID_25_R4 BIT(24)
+#define VA_VALID_65 BIT(14)
+
+/* VLAN Port Default Tag (16 bit) */
+#define B53_VLAN_PORT_DEF_TAG(i) (0x10 + 2 * (i))
+
+/*************************************************************************
+ * Jumbo Frame Page Registers
+ *************************************************************************/
+
+/* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */
+#define B53_JUMBO_PORT_MASK 0x01
+#define B53_JUMBO_PORT_MASK_63XX 0x04
+#define JPM_10_100_JUMBO_EN BIT(24) /* GigE always enabled */
+
+/* Good Frame Max Size without 802.1Q TAG (16 bit) */
+#define B53_JUMBO_MAX_SIZE 0x05
+#define B53_JUMBO_MAX_SIZE_63XX 0x08
+#define JMS_MIN_SIZE 1518
+#define JMS_MAX_SIZE 9724
+
+/*************************************************************************
+ * EEE Configuration Page Registers
+ *************************************************************************/
+
+/* EEE Enable control register (16 bit) */
+#define B53_EEE_EN_CTRL 0x00
+
+/* EEE LPI assert status register (16 bit) */
+#define B53_EEE_LPI_ASSERT_STS 0x02
+
+/* EEE LPI indicate status register (16 bit) */
+#define B53_EEE_LPI_INDICATE 0x4
+
+/* EEE Receiving idle symbols status register (16 bit) */
+#define B53_EEE_RX_IDLE_SYM_STS 0x6
+
+/* EEE Pipeline timer register (32 bit) */
+#define B53_EEE_PIP_TIMER 0xC
+
+/* EEE Sleep timer Gig register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_GIG(i) (0x10 + 4 * (i))
+
+/* EEE Sleep timer FE register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_FE(i) (0x34 + 4 * (i))
+
+/* EEE Minimum LP timer Gig register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_GIG(i) (0x58 + 4 * (i))
+
+/* EEE Minimum LP timer FE register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_FE(i) (0x7c + 4 * (i))
+
+/* EEE Wake timer Gig register (16 bit) */
+#define B53_EEE_WAKE_TIMER_GIG(i) (0xa0 + 2 * (i))
+
+/* EEE Wake timer FE register (16 bit) */
+#define B53_EEE_WAKE_TIMER_FE(i) (0xb2 + 2 * (i))
+
+
+/*************************************************************************
+ * CFP Configuration Page Registers
+ *************************************************************************/
+
+/* CFP Control Register with ports map (8 bit) */
+#define B53_CFP_CTRL 0x00
+
+#endif /* !__B53_REGS_H */
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c
new file mode 100644
index 000000000..069021077
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+/*
+ * Northstar Plus switch SerDes/SGMII PHY main logic
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <net/dsa.h>
+
+#include "b53_priv.h"
+#include "b53_serdes.h"
+#include "b53_regs.h"
+
+static inline struct b53_pcs *pcs_to_b53_pcs(struct phylink_pcs *pcs)
+{
+ return container_of(pcs, struct b53_pcs, pcs);
+}
+
+static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block,
+ u16 value)
+{
+ b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+ b53_write16(dev, B53_SERDES_PAGE, offset, value);
+}
+
+static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block)
+{
+ u16 value;
+
+ b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+ b53_read16(dev, B53_SERDES_PAGE, offset, &value);
+
+ return value;
+}
+
+static void b53_serdes_set_lane(struct b53_device *dev, u8 lane)
+{
+ if (dev->serdes_lane == lane)
+ return;
+
+ WARN_ON(lane > 1);
+
+ b53_serdes_write_blk(dev, B53_SERDES_LANE,
+ SERDES_XGXSBLK0_BLOCKADDRESS, lane);
+ dev->serdes_lane = lane;
+}
+
+static void b53_serdes_write(struct b53_device *dev, u8 lane,
+ u8 offset, u16 block, u16 value)
+{
+ b53_serdes_set_lane(dev, lane);
+ b53_serdes_write_blk(dev, offset, block, value);
+}
+
+static u16 b53_serdes_read(struct b53_device *dev, u8 lane,
+ u8 offset, u16 block)
+{
+ b53_serdes_set_lane(dev, lane);
+ return b53_serdes_read_blk(dev, offset, block);
+}
+
+static int b53_serdes_config(struct phylink_pcs *pcs, unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
+{
+ struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev;
+ u8 lane = pcs_to_b53_pcs(pcs)->lane;
+ u16 reg;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+ SERDES_DIGITAL_BLK);
+ if (interface == PHY_INTERFACE_MODE_1000BASEX)
+ reg |= FIBER_MODE_1000X;
+ else
+ reg &= ~FIBER_MODE_1000X;
+ b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+ SERDES_DIGITAL_BLK, reg);
+
+ return 0;
+}
+
+static void b53_serdes_an_restart(struct phylink_pcs *pcs)
+{
+ struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev;
+ u8 lane = pcs_to_b53_pcs(pcs)->lane;
+ u16 reg;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK);
+ reg |= BMCR_ANRESTART;
+ b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK, reg);
+}
+
+static void b53_serdes_get_state(struct phylink_pcs *pcs,
+ struct phylink_link_state *state)
+{
+ struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev;
+ u8 lane = pcs_to_b53_pcs(pcs)->lane;
+ u16 dig, bmsr;
+
+ dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS,
+ SERDES_DIGITAL_BLK);
+ bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR),
+ SERDES_MII_BLK);
+
+ switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) {
+ case SPEED_STATUS_10:
+ state->speed = SPEED_10;
+ break;
+ case SPEED_STATUS_100:
+ state->speed = SPEED_100;
+ break;
+ case SPEED_STATUS_1000:
+ state->speed = SPEED_1000;
+ break;
+ default:
+ case SPEED_STATUS_2500:
+ state->speed = SPEED_2500;
+ break;
+ }
+
+ state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF;
+ state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
+ state->link = !!(dig & LINK_STATUS);
+ if (dig & PAUSE_RESOLUTION_RX_SIDE)
+ state->pause |= MLO_PAUSE_RX;
+ if (dig & PAUSE_RESOLUTION_TX_SIDE)
+ state->pause |= MLO_PAUSE_TX;
+}
+
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+ phy_interface_t interface, bool link_up)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 reg;
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK);
+ if (link_up)
+ reg &= ~BMCR_PDOWN;
+ else
+ reg |= BMCR_PDOWN;
+ b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_link_set);
+
+static const struct phylink_pcs_ops b53_pcs_ops = {
+ .pcs_get_state = b53_serdes_get_state,
+ .pcs_config = b53_serdes_config,
+ .pcs_an_restart = b53_serdes_an_restart,
+};
+
+void b53_serdes_phylink_get_caps(struct b53_device *dev, int port,
+ struct phylink_config *config)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ switch (lane) {
+ case 0:
+ /* It appears lane 0 supports 2500base-X and 1000base-X */
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ config->supported_interfaces);
+ config->mac_capabilities |= MAC_2500FD;
+ fallthrough;
+ case 1:
+ /* It appears lane 1 only supports 1000base-X and SGMII */
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ config->supported_interfaces);
+ config->mac_capabilities |= MAC_1000FD;
+ break;
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL(b53_serdes_phylink_get_caps);
+
+struct phylink_pcs *b53_serdes_phylink_mac_select_pcs(struct b53_device *dev,
+ int port,
+ phy_interface_t interface)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+
+ if (lane == B53_INVALID_LANE || lane >= B53_N_PCS ||
+ !dev->pcs[lane].dev)
+ return NULL;
+
+ if (!phy_interface_mode_is_8023z(interface) &&
+ interface != PHY_INTERFACE_MODE_SGMII)
+ return NULL;
+
+ return &dev->pcs[lane].pcs;
+}
+EXPORT_SYMBOL(b53_serdes_phylink_mac_select_pcs);
+
+int b53_serdes_init(struct b53_device *dev, int port)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ struct b53_pcs *pcs;
+ u16 id0, msb, lsb;
+
+ if (lane == B53_INVALID_LANE)
+ return -EINVAL;
+
+ id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0);
+ msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1),
+ SERDES_MII_BLK);
+ lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2),
+ SERDES_MII_BLK);
+ if (id0 == 0 || id0 == 0xffff) {
+ dev_err(dev->dev, "SerDes not initialized, check settings\n");
+ return -ENODEV;
+ }
+
+ dev_info(dev->dev,
+ "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n",
+ lane, id0 & SERDES_ID0_MODEL_MASK,
+ (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41,
+ (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK,
+ (u32)msb << 16 | lsb);
+
+ pcs = &dev->pcs[lane];
+ pcs->dev = dev;
+ pcs->lane = lane;
+ pcs->pcs.ops = &b53_pcs_ops;
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_serdes_init);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("B53 Switch SerDes driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h
new file mode 100644
index 000000000..ef81f5da5
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
+ * Northstar Plus switch SerDes/SGMII PHY definitions
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#include <linux/phy.h>
+#include <linux/types.h>
+
+/* Non-standard page used to access SerDes PHY registers on NorthStar Plus */
+#define B53_SERDES_PAGE 0x16
+#define B53_SERDES_BLKADDR 0x3e
+#define B53_SERDES_LANE 0x3c
+
+#define B53_SERDES_ID0 0x20
+#define SERDES_ID0_MODEL_MASK 0x3f
+#define SERDES_ID0_REV_NUM_SHIFT 11
+#define SERDES_ID0_REV_NUM_MASK 0x7
+#define SERDES_ID0_REV_LETTER_SHIFT 14
+
+#define B53_SERDES_MII_REG(x) (0x20 + (x) * 2)
+#define B53_SERDES_DIGITAL_CONTROL(x) (0x1e + (x) * 2)
+#define B53_SERDES_DIGITAL_STATUS 0x28
+
+/* SERDES_DIGITAL_CONTROL1 */
+#define FIBER_MODE_1000X BIT(0)
+#define TBI_INTERFACE BIT(1)
+#define SIGNAL_DETECT_EN BIT(2)
+#define INVERT_SIGNAL_DETECT BIT(3)
+#define AUTODET_EN BIT(4)
+#define SGMII_MASTER_MODE BIT(5)
+#define DISABLE_DLL_PWRDOWN BIT(6)
+#define CRC_CHECKER_DIS BIT(7)
+#define COMMA_DET_EN BIT(8)
+#define ZERO_COMMA_DET_EN BIT(9)
+#define REMOTE_LOOPBACK BIT(10)
+#define SEL_RX_PKTS_FOR_CNTR BIT(11)
+#define MASTER_MDIO_PHY_SEL BIT(13)
+#define DISABLE_SIGNAL_DETECT_FLT BIT(14)
+
+/* SERDES_DIGITAL_CONTROL2 */
+#define EN_PARALLEL_DET BIT(0)
+#define DIS_FALSE_LINK BIT(1)
+#define FLT_FORCE_LINK BIT(2)
+#define EN_AUTONEG_ERR_TIMER BIT(3)
+#define DIS_REMOTE_FAULT_SENSING BIT(4)
+#define FORCE_XMIT_DATA BIT(5)
+#define AUTONEG_FAST_TIMERS BIT(6)
+#define DIS_CARRIER_EXTEND BIT(7)
+#define DIS_TRRR_GENERATION BIT(8)
+#define BYPASS_PCS_RX BIT(9)
+#define BYPASS_PCS_TX BIT(10)
+#define TEST_CNTR_EN BIT(11)
+#define TX_PACKET_SEQ_TEST BIT(12)
+#define TX_IDLE_JAM_SEQ_TEST BIT(13)
+#define CLR_BER_CNTR BIT(14)
+
+/* SERDES_DIGITAL_CONTROL3 */
+#define TX_FIFO_RST BIT(0)
+#define FIFO_ELAST_TX_RX_SHIFT 1
+#define FIFO_ELAST_TX_RX_5K 0
+#define FIFO_ELAST_TX_RX_10K 1
+#define FIFO_ELAST_TX_RX_13_5K 2
+#define FIFO_ELAST_TX_RX_18_5K 3
+#define BLOCK_TXEN_MODE BIT(9)
+#define JAM_FALSE_CARRIER_MODE BIT(10)
+#define EXT_PHY_CRS_MODE BIT(11)
+#define INVERT_EXT_PHY_CRS BIT(12)
+#define DISABLE_TX_CRS BIT(13)
+
+/* SERDES_DIGITAL_STATUS */
+#define SGMII_MODE BIT(0)
+#define LINK_STATUS BIT(1)
+#define DUPLEX_STATUS BIT(2)
+#define SPEED_STATUS_SHIFT 3
+#define SPEED_STATUS_10 0
+#define SPEED_STATUS_100 1
+#define SPEED_STATUS_1000 2
+#define SPEED_STATUS_2500 3
+#define SPEED_STATUS_MASK SPEED_STATUS_2500
+#define PAUSE_RESOLUTION_TX_SIDE BIT(5)
+#define PAUSE_RESOLUTION_RX_SIDE BIT(6)
+#define LINK_STATUS_CHANGE BIT(7)
+#define EARLY_END_EXT_DET BIT(8)
+#define CARRIER_EXT_ERR_DET BIT(9)
+#define RX_ERR_DET BIT(10)
+#define TX_ERR_DET BIT(11)
+#define CRC_ERR_DET BIT(12)
+#define FALSE_CARRIER_ERR_DET BIT(13)
+#define RXFIFO_ERR_DET BIT(14)
+#define TXFIFO_ERR_DET BIT(15)
+
+/* Block offsets */
+#define SERDES_DIGITAL_BLK 0x8300
+#define SERDES_ID0 0x8310
+#define SERDES_MII_BLK 0xffe0
+#define SERDES_XGXSBLK0_BLOCKADDRESS 0xffd0
+
+struct phylink_link_state;
+
+static inline u8 b53_serdes_map_lane(struct b53_device *dev, int port)
+{
+ if (!dev->ops->serdes_map_lane)
+ return B53_INVALID_LANE;
+
+ return dev->ops->serdes_map_lane(dev, port);
+}
+
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+ phy_interface_t interface, bool link_up);
+struct phylink_pcs *b53_serdes_phylink_mac_select_pcs(struct b53_device *dev,
+ int port,
+ phy_interface_t interface);
+void b53_serdes_phylink_get_caps(struct b53_device *dev, int port,
+ struct phylink_config *config);
+#if IS_ENABLED(CONFIG_B53_SERDES)
+int b53_serdes_init(struct b53_device *dev, int port);
+#else
+static inline int b53_serdes_init(struct b53_device *dev, int port)
+{
+ return -ENODEV;
+}
+#endif
diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c
new file mode 100644
index 000000000..308f15d38
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_spi.c
@@ -0,0 +1,376 @@
+/*
+ * B53 register access through SPI
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_data/b53.h>
+
+#include "b53_priv.h"
+
+#define B53_SPI_DATA 0xf0
+
+#define B53_SPI_STATUS 0xfe
+#define B53_SPI_CMD_SPIF BIT(7)
+#define B53_SPI_CMD_RACK BIT(5)
+
+#define B53_SPI_CMD_READ 0x00
+#define B53_SPI_CMD_WRITE 0x01
+#define B53_SPI_CMD_NORMAL 0x60
+#define B53_SPI_CMD_FAST 0x10
+
+#define B53_SPI_PAGE_SELECT 0xff
+
+static inline int b53_spi_read_reg(struct spi_device *spi, u8 reg, u8 *val,
+ unsigned int len)
+{
+ u8 txbuf[2];
+
+ txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_READ;
+ txbuf[1] = reg;
+
+ return spi_write_then_read(spi, txbuf, 2, val, len);
+}
+
+static inline int b53_spi_clear_status(struct spi_device *spi)
+{
+ unsigned int i;
+ u8 rxbuf;
+ int ret;
+
+ for (i = 0; i < 10; i++) {
+ ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
+ if (ret)
+ return ret;
+
+ if (!(rxbuf & B53_SPI_CMD_SPIF))
+ break;
+
+ mdelay(1);
+ }
+
+ if (i == 10)
+ return -EIO;
+
+ return 0;
+}
+
+static inline int b53_spi_set_page(struct spi_device *spi, u8 page)
+{
+ u8 txbuf[3];
+
+ txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+ txbuf[1] = B53_SPI_PAGE_SELECT;
+ txbuf[2] = page;
+
+ return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static inline int b53_prepare_reg_access(struct spi_device *spi, u8 page)
+{
+ int ret = b53_spi_clear_status(spi);
+
+ if (ret)
+ return ret;
+
+ return b53_spi_set_page(spi, page);
+}
+
+static int b53_spi_prepare_reg_read(struct spi_device *spi, u8 reg)
+{
+ u8 rxbuf;
+ int retry_count;
+ int ret;
+
+ ret = b53_spi_read_reg(spi, reg, &rxbuf, 1);
+ if (ret)
+ return ret;
+
+ for (retry_count = 0; retry_count < 10; retry_count++) {
+ ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
+ if (ret)
+ return ret;
+
+ if (rxbuf & B53_SPI_CMD_RACK)
+ break;
+
+ mdelay(1);
+ }
+
+ if (retry_count == 10)
+ return -EIO;
+
+ return 0;
+}
+
+static int b53_spi_read(struct b53_device *dev, u8 page, u8 reg, u8 *data,
+ unsigned int len)
+{
+ struct spi_device *spi = dev->priv;
+ int ret;
+
+ ret = b53_prepare_reg_access(spi, page);
+ if (ret)
+ return ret;
+
+ ret = b53_spi_prepare_reg_read(spi, reg);
+ if (ret)
+ return ret;
+
+ return b53_spi_read_reg(spi, B53_SPI_DATA, data, len);
+}
+
+static int b53_spi_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+ return b53_spi_read(dev, page, reg, val, 1);
+}
+
+static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+ __le16 value;
+ int ret;
+
+ ret = b53_spi_read(dev, page, reg, (u8 *)&value, 2);
+
+ if (!ret)
+ *val = le16_to_cpu(value);
+
+ return ret;
+}
+
+static int b53_spi_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+ __le32 value;
+ int ret;
+
+ ret = b53_spi_read(dev, page, reg, (u8 *)&value, 4);
+
+ if (!ret)
+ *val = le32_to_cpu(value);
+
+ return ret;
+}
+
+static int b53_spi_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ __le64 value;
+ int ret;
+
+ *val = 0;
+ ret = b53_spi_read(dev, page, reg, (u8 *)&value, 6);
+ if (!ret)
+ *val = le64_to_cpu(value);
+
+ return ret;
+}
+
+static int b53_spi_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ __le64 value;
+ int ret;
+
+ ret = b53_spi_read(dev, page, reg, (u8 *)&value, 8);
+
+ if (!ret)
+ *val = le64_to_cpu(value);
+
+ return ret;
+}
+
+static int b53_spi_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+ struct spi_device *spi = dev->priv;
+ int ret;
+ u8 txbuf[3];
+
+ ret = b53_prepare_reg_access(spi, page);
+ if (ret)
+ return ret;
+
+ txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+ txbuf[1] = reg;
+ txbuf[2] = value;
+
+ return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write16(struct b53_device *dev, u8 page, u8 reg, u16 value)
+{
+ struct spi_device *spi = dev->priv;
+ int ret;
+ u8 txbuf[4];
+
+ ret = b53_prepare_reg_access(spi, page);
+ if (ret)
+ return ret;
+
+ txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+ txbuf[1] = reg;
+ put_unaligned_le16(value, &txbuf[2]);
+
+ return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write32(struct b53_device *dev, u8 page, u8 reg, u32 value)
+{
+ struct spi_device *spi = dev->priv;
+ int ret;
+ u8 txbuf[6];
+
+ ret = b53_prepare_reg_access(spi, page);
+ if (ret)
+ return ret;
+
+ txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+ txbuf[1] = reg;
+ put_unaligned_le32(value, &txbuf[2]);
+
+ return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write48(struct b53_device *dev, u8 page, u8 reg, u64 value)
+{
+ struct spi_device *spi = dev->priv;
+ int ret;
+ u8 txbuf[10];
+
+ ret = b53_prepare_reg_access(spi, page);
+ if (ret)
+ return ret;
+
+ txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+ txbuf[1] = reg;
+ put_unaligned_le64(value, &txbuf[2]);
+
+ return spi_write(spi, txbuf, sizeof(txbuf) - 2);
+}
+
+static int b53_spi_write64(struct b53_device *dev, u8 page, u8 reg, u64 value)
+{
+ struct spi_device *spi = dev->priv;
+ int ret;
+ u8 txbuf[10];
+
+ ret = b53_prepare_reg_access(spi, page);
+ if (ret)
+ return ret;
+
+ txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+ txbuf[1] = reg;
+ put_unaligned_le64(value, &txbuf[2]);
+
+ return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static const struct b53_io_ops b53_spi_ops = {
+ .read8 = b53_spi_read8,
+ .read16 = b53_spi_read16,
+ .read32 = b53_spi_read32,
+ .read48 = b53_spi_read48,
+ .read64 = b53_spi_read64,
+ .write8 = b53_spi_write8,
+ .write16 = b53_spi_write16,
+ .write32 = b53_spi_write32,
+ .write48 = b53_spi_write48,
+ .write64 = b53_spi_write64,
+};
+
+static int b53_spi_probe(struct spi_device *spi)
+{
+ struct b53_device *dev;
+ int ret;
+
+ dev = b53_switch_alloc(&spi->dev, &b53_spi_ops, spi);
+ if (!dev)
+ return -ENOMEM;
+
+ if (spi->dev.platform_data)
+ dev->pdata = spi->dev.platform_data;
+
+ ret = b53_switch_register(dev);
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, dev);
+
+ return 0;
+}
+
+static void b53_spi_remove(struct spi_device *spi)
+{
+ struct b53_device *dev = spi_get_drvdata(spi);
+
+ if (dev)
+ b53_switch_remove(dev);
+}
+
+static void b53_spi_shutdown(struct spi_device *spi)
+{
+ struct b53_device *dev = spi_get_drvdata(spi);
+
+ if (dev)
+ b53_switch_shutdown(dev);
+
+ spi_set_drvdata(spi, NULL);
+}
+
+static const struct of_device_id b53_spi_of_match[] = {
+ { .compatible = "brcm,bcm5325" },
+ { .compatible = "brcm,bcm5365" },
+ { .compatible = "brcm,bcm5395" },
+ { .compatible = "brcm,bcm5397" },
+ { .compatible = "brcm,bcm5398" },
+ { .compatible = "brcm,bcm53115" },
+ { .compatible = "brcm,bcm53125" },
+ { .compatible = "brcm,bcm53128" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, b53_spi_of_match);
+
+static const struct spi_device_id b53_spi_ids[] = {
+ { .name = "bcm5325" },
+ { .name = "bcm5365" },
+ { .name = "bcm5395" },
+ { .name = "bcm5397" },
+ { .name = "bcm5398" },
+ { .name = "bcm53115" },
+ { .name = "bcm53125" },
+ { .name = "bcm53128" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, b53_spi_ids);
+
+static struct spi_driver b53_spi_driver = {
+ .driver = {
+ .name = "b53-switch",
+ .of_match_table = b53_spi_of_match,
+ },
+ .probe = b53_spi_probe,
+ .remove = b53_spi_remove,
+ .shutdown = b53_spi_shutdown,
+ .id_table = b53_spi_ids,
+};
+
+module_spi_driver(b53_spi_driver);
+
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 SPI access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
new file mode 100644
index 000000000..bcb440344
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -0,0 +1,698 @@
+/*
+ * B53 register access through Switch Register Access Bridge Registers
+ *
+ * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/b53.h>
+#include <linux/of.h>
+
+#include "b53_priv.h"
+#include "b53_serdes.h"
+
+/* command and status register of the SRAB */
+#define B53_SRAB_CMDSTAT 0x2c
+#define B53_SRAB_CMDSTAT_RST BIT(2)
+#define B53_SRAB_CMDSTAT_WRITE BIT(1)
+#define B53_SRAB_CMDSTAT_GORDYN BIT(0)
+#define B53_SRAB_CMDSTAT_PAGE 24
+#define B53_SRAB_CMDSTAT_REG 16
+
+/* high order word of write data to switch registe */
+#define B53_SRAB_WD_H 0x30
+
+/* low order word of write data to switch registe */
+#define B53_SRAB_WD_L 0x34
+
+/* high order word of read data from switch register */
+#define B53_SRAB_RD_H 0x38
+
+/* low order word of read data from switch register */
+#define B53_SRAB_RD_L 0x3c
+
+/* command and status register of the SRAB */
+#define B53_SRAB_CTRLS 0x40
+#define B53_SRAB_CTRLS_HOST_INTR BIT(1)
+#define B53_SRAB_CTRLS_RCAREQ BIT(3)
+#define B53_SRAB_CTRLS_RCAGNT BIT(4)
+#define B53_SRAB_CTRLS_SW_INIT_DONE BIT(6)
+
+/* the register captures interrupt pulses from the switch */
+#define B53_SRAB_INTR 0x44
+#define B53_SRAB_INTR_P(x) BIT(x)
+#define B53_SRAB_SWITCH_PHY BIT(8)
+#define B53_SRAB_1588_SYNC BIT(9)
+#define B53_SRAB_IMP1_SLEEP_TIMER BIT(10)
+#define B53_SRAB_P7_SLEEP_TIMER BIT(11)
+#define B53_SRAB_IMP0_SLEEP_TIMER BIT(12)
+
+/* Port mux configuration registers */
+#define B53_MUX_CONFIG_P5 0x00
+#define MUX_CONFIG_SGMII 0
+#define MUX_CONFIG_MII_LITE 1
+#define MUX_CONFIG_RGMII 2
+#define MUX_CONFIG_GMII 3
+#define MUX_CONFIG_GPHY 4
+#define MUX_CONFIG_INTERNAL 5
+#define MUX_CONFIG_MASK 0x7
+#define B53_MUX_CONFIG_P4 0x04
+
+struct b53_srab_port_priv {
+ int irq;
+ bool irq_enabled;
+ struct b53_device *dev;
+ unsigned int num;
+ phy_interface_t mode;
+};
+
+struct b53_srab_priv {
+ void __iomem *regs;
+ void __iomem *mux_config;
+ struct b53_srab_port_priv port_intrs[B53_N_PORTS];
+};
+
+static int b53_srab_request_grant(struct b53_device *dev)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ u32 ctrls;
+ int i;
+
+ ctrls = readl(regs + B53_SRAB_CTRLS);
+ ctrls |= B53_SRAB_CTRLS_RCAREQ;
+ writel(ctrls, regs + B53_SRAB_CTRLS);
+
+ for (i = 0; i < 20; i++) {
+ ctrls = readl(regs + B53_SRAB_CTRLS);
+ if (ctrls & B53_SRAB_CTRLS_RCAGNT)
+ break;
+ usleep_range(10, 100);
+ }
+ if (WARN_ON(i == 5))
+ return -EIO;
+
+ return 0;
+}
+
+static void b53_srab_release_grant(struct b53_device *dev)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ u32 ctrls;
+
+ ctrls = readl(regs + B53_SRAB_CTRLS);
+ ctrls &= ~B53_SRAB_CTRLS_RCAREQ;
+ writel(ctrls, regs + B53_SRAB_CTRLS);
+}
+
+static int b53_srab_op(struct b53_device *dev, u8 page, u8 reg, u32 op)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int i;
+ u32 cmdstat;
+
+ /* set register address */
+ cmdstat = (page << B53_SRAB_CMDSTAT_PAGE) |
+ (reg << B53_SRAB_CMDSTAT_REG) |
+ B53_SRAB_CMDSTAT_GORDYN |
+ op;
+ writel(cmdstat, regs + B53_SRAB_CMDSTAT);
+
+ /* check if operation completed */
+ for (i = 0; i < 5; ++i) {
+ cmdstat = readl(regs + B53_SRAB_CMDSTAT);
+ if (!(cmdstat & B53_SRAB_CMDSTAT_GORDYN))
+ break;
+ usleep_range(10, 100);
+ }
+
+ if (WARN_ON(i == 5))
+ return -EIO;
+
+ return 0;
+}
+
+static int b53_srab_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ ret = b53_srab_op(dev, page, reg, 0);
+ if (ret)
+ goto err;
+
+ *val = readl(regs + B53_SRAB_RD_L) & 0xff;
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ ret = b53_srab_op(dev, page, reg, 0);
+ if (ret)
+ goto err;
+
+ *val = readl(regs + B53_SRAB_RD_L) & 0xffff;
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ ret = b53_srab_op(dev, page, reg, 0);
+ if (ret)
+ goto err;
+
+ *val = readl(regs + B53_SRAB_RD_L);
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ ret = b53_srab_op(dev, page, reg, 0);
+ if (ret)
+ goto err;
+
+ *val = readl(regs + B53_SRAB_RD_L);
+ *val += ((u64)readl(regs + B53_SRAB_RD_H) & 0xffff) << 32;
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ ret = b53_srab_op(dev, page, reg, 0);
+ if (ret)
+ goto err;
+
+ *val = readl(regs + B53_SRAB_RD_L);
+ *val += (u64)readl(regs + B53_SRAB_RD_H) << 32;
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ writel(value, regs + B53_SRAB_WD_L);
+
+ ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_write16(struct b53_device *dev, u8 page, u8 reg,
+ u16 value)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ writel(value, regs + B53_SRAB_WD_L);
+
+ ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_write32(struct b53_device *dev, u8 page, u8 reg,
+ u32 value)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ writel(value, regs + B53_SRAB_WD_L);
+
+ ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_write48(struct b53_device *dev, u8 page, u8 reg,
+ u64 value)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ writel((u32)value, regs + B53_SRAB_WD_L);
+ writel((u16)(value >> 32), regs + B53_SRAB_WD_H);
+
+ ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
+ u64 value)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ u8 __iomem *regs = priv->regs;
+ int ret = 0;
+
+ ret = b53_srab_request_grant(dev);
+ if (ret)
+ goto err;
+
+ writel((u32)value, regs + B53_SRAB_WD_L);
+ writel((u32)(value >> 32), regs + B53_SRAB_WD_H);
+
+ ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
+
+err:
+ b53_srab_release_grant(dev);
+
+ return ret;
+}
+
+static irqreturn_t b53_srab_port_thread(int irq, void *dev_id)
+{
+ struct b53_srab_port_priv *port = dev_id;
+ struct b53_device *dev = port->dev;
+
+ if (port->mode == PHY_INTERFACE_MODE_SGMII)
+ b53_port_event(dev->ds, port->num);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t b53_srab_port_isr(int irq, void *dev_id)
+{
+ struct b53_srab_port_priv *port = dev_id;
+ struct b53_device *dev = port->dev;
+ struct b53_srab_priv *priv = dev->priv;
+
+ /* Acknowledge the interrupt */
+ writel(BIT(port->num), priv->regs + B53_SRAB_INTR);
+
+ return IRQ_WAKE_THREAD;
+}
+
+#if IS_ENABLED(CONFIG_B53_SERDES)
+static u8 b53_srab_serdes_map_lane(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+ if (p->mode != PHY_INTERFACE_MODE_SGMII)
+ return B53_INVALID_LANE;
+
+ switch (port) {
+ case 5:
+ return 0;
+ case 4:
+ return 1;
+ default:
+ return B53_INVALID_LANE;
+ }
+}
+#endif
+
+static int b53_srab_irq_enable(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+ int ret = 0;
+
+ /* Interrupt is optional and was not specified, do not make
+ * this fatal
+ */
+ if (p->irq == -ENXIO)
+ return ret;
+
+ ret = request_threaded_irq(p->irq, b53_srab_port_isr,
+ b53_srab_port_thread, 0,
+ dev_name(dev->dev), p);
+ if (!ret)
+ p->irq_enabled = true;
+
+ return ret;
+}
+
+static void b53_srab_irq_disable(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+ if (p->irq_enabled) {
+ free_irq(p->irq, p);
+ p->irq_enabled = false;
+ }
+}
+
+static void b53_srab_phylink_get_caps(struct b53_device *dev, int port,
+ struct phylink_config *config)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+ switch (p->mode) {
+ case PHY_INTERFACE_MODE_SGMII:
+#if IS_ENABLED(CONFIG_B53_SERDES)
+ /* If p->mode indicates SGMII mode, that essentially means we
+ * are using a serdes. As the serdes for the capabilities.
+ */
+ b53_serdes_phylink_get_caps(dev, port, config);
+#endif
+ break;
+
+ case PHY_INTERFACE_MODE_NA:
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII:
+ /* If we support RGMII, support all RGMII modes, since
+ * that dictates the PHY delay settings.
+ */
+ phy_interface_set_rgmii(config->supported_interfaces);
+ break;
+
+ default:
+ /* Some other mode (e.g. MII, GMII etc) */
+ __set_bit(p->mode, config->supported_interfaces);
+ break;
+ }
+}
+
+static const struct b53_io_ops b53_srab_ops = {
+ .read8 = b53_srab_read8,
+ .read16 = b53_srab_read16,
+ .read32 = b53_srab_read32,
+ .read48 = b53_srab_read48,
+ .read64 = b53_srab_read64,
+ .write8 = b53_srab_write8,
+ .write16 = b53_srab_write16,
+ .write32 = b53_srab_write32,
+ .write48 = b53_srab_write48,
+ .write64 = b53_srab_write64,
+ .irq_enable = b53_srab_irq_enable,
+ .irq_disable = b53_srab_irq_disable,
+ .phylink_get_caps = b53_srab_phylink_get_caps,
+#if IS_ENABLED(CONFIG_B53_SERDES)
+ .phylink_mac_select_pcs = b53_serdes_phylink_mac_select_pcs,
+ .serdes_map_lane = b53_srab_serdes_map_lane,
+ .serdes_link_set = b53_serdes_link_set,
+#endif
+};
+
+static const struct of_device_id b53_srab_of_match[] = {
+ { .compatible = "brcm,bcm53010-srab" },
+ { .compatible = "brcm,bcm53011-srab" },
+ { .compatible = "brcm,bcm53012-srab" },
+ { .compatible = "brcm,bcm53018-srab" },
+ { .compatible = "brcm,bcm53019-srab" },
+ { .compatible = "brcm,bcm5301x-srab" },
+ { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
+ { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,bcm58622-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
+ { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,omega-srab", .data = (void *)BCM583XX_DEVICE_ID },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, b53_srab_of_match);
+
+static void b53_srab_intr_set(struct b53_srab_priv *priv, bool set)
+{
+ u32 reg;
+
+ reg = readl(priv->regs + B53_SRAB_CTRLS);
+ if (set)
+ reg |= B53_SRAB_CTRLS_HOST_INTR;
+ else
+ reg &= ~B53_SRAB_CTRLS_HOST_INTR;
+ writel(reg, priv->regs + B53_SRAB_CTRLS);
+}
+
+static void b53_srab_prepare_irq(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *port;
+ unsigned int i;
+ char *name;
+
+ /* Clear all pending interrupts */
+ writel(0xffffffff, priv->regs + B53_SRAB_INTR);
+
+ for (i = 0; i < B53_N_PORTS; i++) {
+ port = &priv->port_intrs[i];
+
+ /* There is no port 6 */
+ if (i == 6)
+ continue;
+
+ name = kasprintf(GFP_KERNEL, "link_state_p%d", i);
+ if (!name)
+ return;
+
+ port->num = i;
+ port->dev = dev;
+ port->irq = platform_get_irq_byname_optional(pdev, name);
+ kfree(name);
+ }
+
+ b53_srab_intr_set(priv, true);
+}
+
+static void b53_srab_mux_init(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p;
+ unsigned int port;
+ u32 reg, off = 0;
+ int ret;
+
+ if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID)
+ return;
+
+ priv->mux_config = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(priv->mux_config))
+ return;
+
+ /* Obtain the port mux configuration so we know which lanes
+ * actually map to SerDes lanes
+ */
+ for (port = 5; port > 3; port--, off += 4) {
+ p = &priv->port_intrs[port];
+
+ reg = readl(priv->mux_config + B53_MUX_CONFIG_P5 + off);
+ switch (reg & MUX_CONFIG_MASK) {
+ case MUX_CONFIG_SGMII:
+ p->mode = PHY_INTERFACE_MODE_SGMII;
+ ret = b53_serdes_init(dev, port);
+ if (ret)
+ continue;
+ break;
+ case MUX_CONFIG_MII_LITE:
+ p->mode = PHY_INTERFACE_MODE_MII;
+ break;
+ case MUX_CONFIG_GMII:
+ p->mode = PHY_INTERFACE_MODE_GMII;
+ break;
+ case MUX_CONFIG_RGMII:
+ p->mode = PHY_INTERFACE_MODE_RGMII;
+ break;
+ case MUX_CONFIG_INTERNAL:
+ p->mode = PHY_INTERFACE_MODE_INTERNAL;
+ break;
+ default:
+ p->mode = PHY_INTERFACE_MODE_NA;
+ break;
+ }
+
+ if (p->mode != PHY_INTERFACE_MODE_NA)
+ dev_info(&pdev->dev, "Port %d mode: %s\n",
+ port, phy_modes(p->mode));
+ }
+}
+
+static int b53_srab_probe(struct platform_device *pdev)
+{
+ struct b53_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *dn = pdev->dev.of_node;
+ const struct of_device_id *of_id = NULL;
+ struct b53_srab_priv *priv;
+ struct b53_device *dev;
+
+ if (dn)
+ of_id = of_match_node(b53_srab_of_match, dn);
+
+ if (of_id) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->chip_id = (u32)(unsigned long)of_id->data;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->regs))
+ return PTR_ERR(priv->regs);
+
+ dev = b53_switch_alloc(&pdev->dev, &b53_srab_ops, priv);
+ if (!dev)
+ return -ENOMEM;
+
+ if (pdata)
+ dev->pdata = pdata;
+
+ platform_set_drvdata(pdev, dev);
+
+ b53_srab_prepare_irq(pdev);
+ b53_srab_mux_init(pdev);
+
+ return b53_switch_register(dev);
+}
+
+static int b53_srab_remove(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+
+ if (!dev)
+ return 0;
+
+ b53_srab_intr_set(dev->priv, false);
+ b53_switch_remove(dev);
+
+ return 0;
+}
+
+static void b53_srab_shutdown(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+
+ if (!dev)
+ return;
+
+ b53_switch_shutdown(dev);
+
+ platform_set_drvdata(pdev, NULL);
+}
+
+static struct platform_driver b53_srab_driver = {
+ .probe = b53_srab_probe,
+ .remove = b53_srab_remove,
+ .shutdown = b53_srab_shutdown,
+ .driver = {
+ .name = "b53-srab-switch",
+ .of_match_table = b53_srab_of_match,
+ },
+};
+
+module_platform_driver(b53_srab_driver);
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_DESCRIPTION("B53 Switch Register Access Bridge Registers (SRAB) access driver");
+MODULE_LICENSE("Dual BSD/GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 06:15:43 +0000