diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/dsa/realtek/realtek-mdio.c | 290 |
1 files changed, 290 insertions, 0 deletions
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c new file mode 100644 index 000000000..5a8fe707c --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Realtek MDIO interface driver + * + * ASICs we intend to support with this driver: + * + * RTL8366 - The original version, apparently + * RTL8369 - Similar enough to have the same datsheet as RTL8366 + * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite + * different register layout from the other two + * RTL8366S - Is this "RTL8366 super"? + * RTL8367 - Has an OpenWRT driver as well + * RTL8368S - Seems to be an alternative name for RTL8366RB + * RTL8370 - Also uses SMI + * + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com> + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com> + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/overflow.h> +#include <linux/regmap.h> + +#include "realtek.h" + +/* Read/write via mdiobus */ +#define REALTEK_MDIO_CTRL0_REG 31 +#define REALTEK_MDIO_START_REG 29 +#define REALTEK_MDIO_CTRL1_REG 21 +#define REALTEK_MDIO_ADDRESS_REG 23 +#define REALTEK_MDIO_DATA_WRITE_REG 24 +#define REALTEK_MDIO_DATA_READ_REG 25 + +#define REALTEK_MDIO_START_OP 0xFFFF +#define REALTEK_MDIO_ADDR_OP 0x000E +#define REALTEK_MDIO_READ_OP 0x0001 +#define REALTEK_MDIO_WRITE_OP 0x0003 + +static int realtek_mdio_write(void *ctx, u32 reg, u32 val) +{ + struct realtek_priv *priv = ctx; + struct mii_bus *bus = priv->bus; + int ret; + + mutex_lock(&bus->mdio_lock); + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP); + +out_unlock: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int realtek_mdio_read(void *ctx, u32 reg, u32 *val) +{ + struct realtek_priv *priv = ctx; + struct mii_bus *bus = priv->bus; + int ret; + + mutex_lock(&bus->mdio_lock); + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP); + if (ret) + goto out_unlock; + + ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG); + if (ret >= 0) { + *val = ret; + ret = 0; + } + +out_unlock: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static void realtek_mdio_lock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_lock(&priv->map_lock); +} + +static void realtek_mdio_unlock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_unlock(&priv->map_lock); +} + +static const struct regmap_config realtek_mdio_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* PHY regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = realtek_mdio_read, + .reg_write = realtek_mdio_write, + .cache_type = REGCACHE_NONE, + .lock = realtek_mdio_lock, + .unlock = realtek_mdio_unlock, +}; + +static const struct regmap_config realtek_mdio_nolock_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* PHY regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = realtek_mdio_read, + .reg_write = realtek_mdio_write, + .cache_type = REGCACHE_NONE, + .disable_locking = true, +}; + +static int realtek_mdio_probe(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv; + struct device *dev = &mdiodev->dev; + const struct realtek_variant *var; + struct regmap_config rc; + struct device_node *np; + int ret; + + var = of_device_get_match_data(dev); + if (!var) + return -EINVAL; + + priv = devm_kzalloc(&mdiodev->dev, + size_add(sizeof(*priv), var->chip_data_sz), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->map_lock); + + rc = realtek_mdio_regmap_config; + rc.lock_arg = priv; + priv->map = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map)) { + ret = PTR_ERR(priv->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + rc = realtek_mdio_nolock_regmap_config; + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map_nolock)) { + ret = PTR_ERR(priv->map_nolock); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + priv->mdio_addr = mdiodev->addr; + priv->bus = mdiodev->bus; + priv->dev = &mdiodev->dev; + priv->chip_data = (void *)priv + sizeof(*priv); + + priv->clk_delay = var->clk_delay; + priv->cmd_read = var->cmd_read; + priv->cmd_write = var->cmd_write; + priv->ops = var->ops; + + priv->write_reg_noack = realtek_mdio_write; + + np = dev->of_node; + + dev_set_drvdata(dev, priv); + + /* TODO: if power is software controlled, set up any regulators here */ + priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(priv->reset); + } + + if (priv->reset) { + gpiod_set_value(priv->reset, 1); + dev_dbg(dev, "asserted RESET\n"); + msleep(REALTEK_HW_STOP_DELAY); + gpiod_set_value(priv->reset, 0); + msleep(REALTEK_HW_START_DELAY); + dev_dbg(dev, "deasserted RESET\n"); + } + + ret = priv->ops->detect(priv); + if (ret) { + dev_err(dev, "unable to detect switch\n"); + return ret; + } + + priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->ds->dev = dev; + priv->ds->num_ports = priv->num_ports; + priv->ds->priv = priv; + priv->ds->ops = var->ds_ops_mdio; + + ret = dsa_register_switch(priv->ds); + if (ret) { + dev_err(priv->dev, "unable to register switch ret = %d\n", ret); + return ret; + } + + return 0; +} + +static void realtek_mdio_remove(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_unregister_switch(priv->ds); + + /* leave the device reset asserted */ + if (priv->reset) + gpiod_set_value(priv->reset, 1); +} + +static void realtek_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + +static const struct of_device_id realtek_mdio_of_match[] = { +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) + { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, +#endif +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) + { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, +#endif + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, realtek_mdio_of_match); + +static struct mdio_driver realtek_mdio_driver = { + .mdiodrv.driver = { + .name = "realtek-mdio", + .of_match_table = of_match_ptr(realtek_mdio_of_match), + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +mdio_module_driver(realtek_mdio_driver); + +MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); +MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface"); +MODULE_LICENSE("GPL"); |