summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/realtek
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/realtek')
-rw-r--r--drivers/net/dsa/realtek/Kconfig54
-rw-r--r--drivers/net/dsa/realtek/Makefile6
-rw-r--r--drivers/net/dsa/realtek/realtek-mdio.c290
-rw-r--r--drivers/net/dsa/realtek/realtek-smi.c570
-rw-r--r--drivers/net/dsa/realtek/realtek.h150
-rw-r--r--drivers/net/dsa/realtek/rtl8365mb.c2148
-rw-r--r--drivers/net/dsa/realtek/rtl8366-core.c448
-rw-r--r--drivers/net/dsa/realtek/rtl8366rb.c1873
8 files changed, 5539 insertions, 0 deletions
diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig
new file mode 100644
index 000000000..060165a85
--- /dev/null
+++ b/drivers/net/dsa/realtek/Kconfig
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig NET_DSA_REALTEK
+ tristate "Realtek Ethernet switch family support"
+ depends on NET_DSA
+ select FIXED_PHY
+ select IRQ_DOMAIN
+ select REALTEK_PHY
+ select REGMAP
+ help
+ Select to enable support for Realtek Ethernet switch chips.
+
+ Note that at least one interface driver must be enabled for the
+ subdrivers to be loaded. Moreover, an interface driver cannot achieve
+ anything without at least one subdriver enabled.
+
+if NET_DSA_REALTEK
+
+config NET_DSA_REALTEK_MDIO
+ tristate "Realtek MDIO interface driver"
+ depends on OF
+ depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB
+ depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB
+ depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB
+ help
+ Select to enable support for registering switches configured
+ through MDIO.
+
+config NET_DSA_REALTEK_SMI
+ tristate "Realtek SMI interface driver"
+ depends on OF
+ depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB
+ depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB
+ depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB
+ help
+ Select to enable support for registering switches connected
+ through SMI.
+
+config NET_DSA_REALTEK_RTL8365MB
+ tristate "Realtek RTL8365MB switch subdriver"
+ imply NET_DSA_REALTEK_SMI
+ imply NET_DSA_REALTEK_MDIO
+ select NET_DSA_TAG_RTL8_4
+ help
+ Select to enable support for Realtek RTL8365MB-VC and RTL8367S.
+
+config NET_DSA_REALTEK_RTL8366RB
+ tristate "Realtek RTL8366RB switch subdriver"
+ imply NET_DSA_REALTEK_SMI
+ imply NET_DSA_REALTEK_MDIO
+ select NET_DSA_TAG_RTL4_A
+ help
+ Select to enable support for Realtek RTL8366RB.
+
+endif
diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile
new file mode 100644
index 000000000..0aab57252
--- /dev/null
+++ b/drivers/net/dsa/realtek/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
+obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o
+rtl8366-objs := rtl8366-core.o rtl8366rb.o
+obj-$(CONFIG_NET_DSA_REALTEK_RTL8365MB) += rtl8365mb.o
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
new file mode 100644
index 000000000..5a8fe707c
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek-mdio.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek MDIO interface driver
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366 - The original version, apparently
+ * RTL8369 - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ * different register layout from the other two
+ * RTL8366S - Is this "RTL8366 super"?
+ * RTL8367 - Has an OpenWRT driver as well
+ * RTL8368S - Seems to be an alternative name for RTL8366RB
+ * RTL8370 - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/overflow.h>
+#include <linux/regmap.h>
+
+#include "realtek.h"
+
+/* Read/write via mdiobus */
+#define REALTEK_MDIO_CTRL0_REG 31
+#define REALTEK_MDIO_START_REG 29
+#define REALTEK_MDIO_CTRL1_REG 21
+#define REALTEK_MDIO_ADDRESS_REG 23
+#define REALTEK_MDIO_DATA_WRITE_REG 24
+#define REALTEK_MDIO_DATA_READ_REG 25
+
+#define REALTEK_MDIO_START_OP 0xFFFF
+#define REALTEK_MDIO_ADDR_OP 0x000E
+#define REALTEK_MDIO_READ_OP 0x0001
+#define REALTEK_MDIO_WRITE_OP 0x0003
+
+static int realtek_mdio_write(void *ctx, u32 reg, u32 val)
+{
+ struct realtek_priv *priv = ctx;
+ struct mii_bus *bus = priv->bus;
+ int ret;
+
+ mutex_lock(&bus->mdio_lock);
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP);
+
+out_unlock:
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
+{
+ struct realtek_priv *priv = ctx;
+ struct mii_bus *bus = priv->bus;
+ int ret;
+
+ mutex_lock(&bus->mdio_lock);
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP);
+ if (ret)
+ goto out_unlock;
+
+ ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG);
+ if (ret >= 0) {
+ *val = ret;
+ ret = 0;
+ }
+
+out_unlock:
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static void realtek_mdio_lock(void *ctx)
+{
+ struct realtek_priv *priv = ctx;
+
+ mutex_lock(&priv->map_lock);
+}
+
+static void realtek_mdio_unlock(void *ctx)
+{
+ struct realtek_priv *priv = ctx;
+
+ mutex_unlock(&priv->map_lock);
+}
+
+static const struct regmap_config realtek_mdio_regmap_config = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ /* PHY regs are at 0x8000 */
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = realtek_mdio_read,
+ .reg_write = realtek_mdio_write,
+ .cache_type = REGCACHE_NONE,
+ .lock = realtek_mdio_lock,
+ .unlock = realtek_mdio_unlock,
+};
+
+static const struct regmap_config realtek_mdio_nolock_regmap_config = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ /* PHY regs are at 0x8000 */
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = realtek_mdio_read,
+ .reg_write = realtek_mdio_write,
+ .cache_type = REGCACHE_NONE,
+ .disable_locking = true,
+};
+
+static int realtek_mdio_probe(struct mdio_device *mdiodev)
+{
+ struct realtek_priv *priv;
+ struct device *dev = &mdiodev->dev;
+ const struct realtek_variant *var;
+ struct regmap_config rc;
+ struct device_node *np;
+ int ret;
+
+ var = of_device_get_match_data(dev);
+ if (!var)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&mdiodev->dev,
+ size_add(sizeof(*priv), var->chip_data_sz),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_init(&priv->map_lock);
+
+ rc = realtek_mdio_regmap_config;
+ rc.lock_arg = priv;
+ priv->map = devm_regmap_init(dev, NULL, priv, &rc);
+ if (IS_ERR(priv->map)) {
+ ret = PTR_ERR(priv->map);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ rc = realtek_mdio_nolock_regmap_config;
+ priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
+ if (IS_ERR(priv->map_nolock)) {
+ ret = PTR_ERR(priv->map_nolock);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ priv->mdio_addr = mdiodev->addr;
+ priv->bus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+ priv->chip_data = (void *)priv + sizeof(*priv);
+
+ priv->clk_delay = var->clk_delay;
+ priv->cmd_read = var->cmd_read;
+ priv->cmd_write = var->cmd_write;
+ priv->ops = var->ops;
+
+ priv->write_reg_noack = realtek_mdio_write;
+
+ np = dev->of_node;
+
+ dev_set_drvdata(dev, priv);
+
+ /* TODO: if power is software controlled, set up any regulators here */
+ priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+ priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->reset)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return PTR_ERR(priv->reset);
+ }
+
+ if (priv->reset) {
+ gpiod_set_value(priv->reset, 1);
+ dev_dbg(dev, "asserted RESET\n");
+ msleep(REALTEK_HW_STOP_DELAY);
+ gpiod_set_value(priv->reset, 0);
+ msleep(REALTEK_HW_START_DELAY);
+ dev_dbg(dev, "deasserted RESET\n");
+ }
+
+ ret = priv->ops->detect(priv);
+ if (ret) {
+ dev_err(dev, "unable to detect switch\n");
+ return ret;
+ }
+
+ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = dev;
+ priv->ds->num_ports = priv->num_ports;
+ priv->ds->priv = priv;
+ priv->ds->ops = var->ds_ops_mdio;
+
+ ret = dsa_register_switch(priv->ds);
+ if (ret) {
+ dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void realtek_mdio_remove(struct mdio_device *mdiodev)
+{
+ struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+ if (!priv)
+ return;
+
+ dsa_unregister_switch(priv->ds);
+
+ /* leave the device reset asserted */
+ if (priv->reset)
+ gpiod_set_value(priv->reset, 1);
+}
+
+static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
+{
+ struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(priv->ds);
+
+ dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static const struct of_device_id realtek_mdio_of_match[] = {
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
+ { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
+ { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
+#endif
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_mdio_of_match);
+
+static struct mdio_driver realtek_mdio_driver = {
+ .mdiodrv.driver = {
+ .name = "realtek-mdio",
+ .of_match_table = of_match_ptr(realtek_mdio_of_match),
+ },
+ .probe = realtek_mdio_probe,
+ .remove = realtek_mdio_remove,
+ .shutdown = realtek_mdio_shutdown,
+};
+
+mdio_module_driver(realtek_mdio_driver);
+
+MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
+MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
new file mode 100644
index 000000000..1b447d96b
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek-smi.c
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek Simple Management Interface (SMI) driver
+ * It can be discussed how "simple" this interface is.
+ *
+ * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels
+ * but the protocol is not MDIO at all. Instead it is a Realtek
+ * pecularity that need to bit-bang the lines in a special way to
+ * communicate with the switch.
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366 - The original version, apparently
+ * RTL8369 - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ * different register layout from the other two
+ * RTL8366S - Is this "RTL8366 super"?
+ * RTL8367 - Has an OpenWRT driver as well
+ * RTL8368S - Seems to be an alternative name for RTL8366RB
+ * RTL8370 - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+
+#include "realtek.h"
+
+#define REALTEK_SMI_ACK_RETRY_COUNT 5
+
+static inline void realtek_smi_clk_delay(struct realtek_priv *priv)
+{
+ ndelay(priv->clk_delay);
+}
+
+static void realtek_smi_start(struct realtek_priv *priv)
+{
+ /* Set GPIO pins to output mode, with initial state:
+ * SCK = 0, SDA = 1
+ */
+ gpiod_direction_output(priv->mdc, 0);
+ gpiod_direction_output(priv->mdio, 1);
+ realtek_smi_clk_delay(priv);
+
+ /* CLK 1: 0 -> 1, 1 -> 0 */
+ gpiod_set_value(priv->mdc, 1);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 0);
+ realtek_smi_clk_delay(priv);
+
+ /* CLK 2: */
+ gpiod_set_value(priv->mdc, 1);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdio, 0);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 0);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdio, 1);
+}
+
+static void realtek_smi_stop(struct realtek_priv *priv)
+{
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdio, 0);
+ gpiod_set_value(priv->mdc, 1);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdio, 1);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 1);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 0);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 1);
+
+ /* Add a click */
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 0);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 1);
+
+ /* Set GPIO pins to input mode */
+ gpiod_direction_input(priv->mdio);
+ gpiod_direction_input(priv->mdc);
+}
+
+static void realtek_smi_write_bits(struct realtek_priv *priv, u32 data, u32 len)
+{
+ for (; len > 0; len--) {
+ realtek_smi_clk_delay(priv);
+
+ /* Prepare data */
+ gpiod_set_value(priv->mdio, !!(data & (1 << (len - 1))));
+ realtek_smi_clk_delay(priv);
+
+ /* Clocking */
+ gpiod_set_value(priv->mdc, 1);
+ realtek_smi_clk_delay(priv);
+ gpiod_set_value(priv->mdc, 0);
+ }
+}
+
+static void realtek_smi_read_bits(struct realtek_priv *priv, u32 len, u32 *data)
+{
+ gpiod_direction_input(priv->mdio);
+
+ for (*data = 0; len > 0; len--) {
+ u32 u;
+
+ realtek_smi_clk_delay(priv);
+
+ /* Clocking */
+ gpiod_set_value(priv->mdc, 1);
+ realtek_smi_clk_delay(priv);
+ u = !!gpiod_get_value(priv->mdio);
+ gpiod_set_value(priv->mdc, 0);
+
+ *data |= (u << (len - 1));
+ }
+
+ gpiod_direction_output(priv->mdio, 0);
+}
+
+static int realtek_smi_wait_for_ack(struct realtek_priv *priv)
+{
+ int retry_cnt;
+
+ retry_cnt = 0;
+ do {
+ u32 ack;
+
+ realtek_smi_read_bits(priv, 1, &ack);
+ if (ack == 0)
+ break;
+
+ if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) {
+ dev_err(priv->dev, "ACK timeout\n");
+ return -ETIMEDOUT;
+ }
+ } while (1);
+
+ return 0;
+}
+
+static int realtek_smi_write_byte(struct realtek_priv *priv, u8 data)
+{
+ realtek_smi_write_bits(priv, data, 8);
+ return realtek_smi_wait_for_ack(priv);
+}
+
+static int realtek_smi_write_byte_noack(struct realtek_priv *priv, u8 data)
+{
+ realtek_smi_write_bits(priv, data, 8);
+ return 0;
+}
+
+static int realtek_smi_read_byte0(struct realtek_priv *priv, u8 *data)
+{
+ u32 t;
+
+ /* Read data */
+ realtek_smi_read_bits(priv, 8, &t);
+ *data = (t & 0xff);
+
+ /* Send an ACK */
+ realtek_smi_write_bits(priv, 0x00, 1);
+
+ return 0;
+}
+
+static int realtek_smi_read_byte1(struct realtek_priv *priv, u8 *data)
+{
+ u32 t;
+
+ /* Read data */
+ realtek_smi_read_bits(priv, 8, &t);
+ *data = (t & 0xff);
+
+ /* Send an ACK */
+ realtek_smi_write_bits(priv, 0x01, 1);
+
+ return 0;
+}
+
+static int realtek_smi_read_reg(struct realtek_priv *priv, u32 addr, u32 *data)
+{
+ unsigned long flags;
+ u8 lo = 0;
+ u8 hi = 0;
+ int ret;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ realtek_smi_start(priv);
+
+ /* Send READ command */
+ ret = realtek_smi_write_byte(priv, priv->cmd_read);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[7:0] */
+ ret = realtek_smi_write_byte(priv, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[15:8] */
+ ret = realtek_smi_write_byte(priv, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* Read DATA[7:0] */
+ realtek_smi_read_byte0(priv, &lo);
+ /* Read DATA[15:8] */
+ realtek_smi_read_byte1(priv, &hi);
+
+ *data = ((u32)lo) | (((u32)hi) << 8);
+
+ ret = 0;
+
+ out:
+ realtek_smi_stop(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+}
+
+static int realtek_smi_write_reg(struct realtek_priv *priv,
+ u32 addr, u32 data, bool ack)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ realtek_smi_start(priv);
+
+ /* Send WRITE command */
+ ret = realtek_smi_write_byte(priv, priv->cmd_write);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[7:0] */
+ ret = realtek_smi_write_byte(priv, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[15:8] */
+ ret = realtek_smi_write_byte(priv, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* Write DATA[7:0] */
+ ret = realtek_smi_write_byte(priv, data & 0xff);
+ if (ret)
+ goto out;
+
+ /* Write DATA[15:8] */
+ if (ack)
+ ret = realtek_smi_write_byte(priv, data >> 8);
+ else
+ ret = realtek_smi_write_byte_noack(priv, data >> 8);
+ if (ret)
+ goto out;
+
+ ret = 0;
+
+ out:
+ realtek_smi_stop(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+}
+
+/* There is one single case when we need to use this accessor and that
+ * is when issueing soft reset. Since the device reset as soon as we write
+ * that bit, no ACK will come back for natural reasons.
+ */
+static int realtek_smi_write_reg_noack(void *ctx, u32 reg, u32 val)
+{
+ return realtek_smi_write_reg(ctx, reg, val, false);
+}
+
+/* Regmap accessors */
+
+static int realtek_smi_write(void *ctx, u32 reg, u32 val)
+{
+ struct realtek_priv *priv = ctx;
+
+ return realtek_smi_write_reg(priv, reg, val, true);
+}
+
+static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
+{
+ struct realtek_priv *priv = ctx;
+
+ return realtek_smi_read_reg(priv, reg, val);
+}
+
+static void realtek_smi_lock(void *ctx)
+{
+ struct realtek_priv *priv = ctx;
+
+ mutex_lock(&priv->map_lock);
+}
+
+static void realtek_smi_unlock(void *ctx)
+{
+ struct realtek_priv *priv = ctx;
+
+ mutex_unlock(&priv->map_lock);
+}
+
+static const struct regmap_config realtek_smi_regmap_config = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ /* PHY regs are at 0x8000 */
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = realtek_smi_read,
+ .reg_write = realtek_smi_write,
+ .cache_type = REGCACHE_NONE,
+ .lock = realtek_smi_lock,
+ .unlock = realtek_smi_unlock,
+};
+
+static const struct regmap_config realtek_smi_nolock_regmap_config = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ /* PHY regs are at 0x8000 */
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = realtek_smi_read,
+ .reg_write = realtek_smi_write,
+ .cache_type = REGCACHE_NONE,
+ .disable_locking = true,
+};
+
+static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct realtek_priv *priv = bus->priv;
+
+ return priv->ops->phy_read(priv, addr, regnum);
+}
+
+static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct realtek_priv *priv = bus->priv;
+
+ return priv->ops->phy_write(priv, addr, regnum, val);
+}
+
+static int realtek_smi_setup_mdio(struct dsa_switch *ds)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct device_node *mdio_np;
+ int ret;
+
+ mdio_np = of_get_compatible_child(priv->dev->of_node, "realtek,smi-mdio");
+ if (!mdio_np) {
+ dev_err(priv->dev, "no MDIO bus node\n");
+ return -ENODEV;
+ }
+
+ priv->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
+ if (!priv->slave_mii_bus) {
+ ret = -ENOMEM;
+ goto err_put_node;
+ }
+ priv->slave_mii_bus->priv = priv;
+ priv->slave_mii_bus->name = "SMI slave MII";
+ priv->slave_mii_bus->read = realtek_smi_mdio_read;
+ priv->slave_mii_bus->write = realtek_smi_mdio_write;
+ snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
+ ds->index);
+ priv->slave_mii_bus->dev.of_node = mdio_np;
+ priv->slave_mii_bus->parent = priv->dev;
+ ds->slave_mii_bus = priv->slave_mii_bus;
+
+ ret = devm_of_mdiobus_register(priv->dev, priv->slave_mii_bus, mdio_np);
+ if (ret) {
+ dev_err(priv->dev, "unable to register MDIO bus %s\n",
+ priv->slave_mii_bus->id);
+ goto err_put_node;
+ }
+
+ return 0;
+
+err_put_node:
+ of_node_put(mdio_np);
+
+ return ret;
+}
+
+static int realtek_smi_probe(struct platform_device *pdev)
+{
+ const struct realtek_variant *var;
+ struct device *dev = &pdev->dev;
+ struct realtek_priv *priv;
+ struct regmap_config rc;
+ struct device_node *np;
+ int ret;
+
+ var = of_device_get_match_data(dev);
+ np = dev->of_node;
+
+ priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->chip_data = (void *)priv + sizeof(*priv);
+
+ mutex_init(&priv->map_lock);
+
+ rc = realtek_smi_regmap_config;
+ rc.lock_arg = priv;
+ priv->map = devm_regmap_init(dev, NULL, priv, &rc);
+ if (IS_ERR(priv->map)) {
+ ret = PTR_ERR(priv->map);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ rc = realtek_smi_nolock_regmap_config;
+ priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
+ if (IS_ERR(priv->map_nolock)) {
+ ret = PTR_ERR(priv->map_nolock);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Link forward and backward */
+ priv->dev = dev;
+ priv->clk_delay = var->clk_delay;
+ priv->cmd_read = var->cmd_read;
+ priv->cmd_write = var->cmd_write;
+ priv->ops = var->ops;
+
+ priv->setup_interface = realtek_smi_setup_mdio;
+ priv->write_reg_noack = realtek_smi_write_reg_noack;
+
+ dev_set_drvdata(dev, priv);
+ spin_lock_init(&priv->lock);
+
+ /* TODO: if power is software controlled, set up any regulators here */
+
+ priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->reset)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return PTR_ERR(priv->reset);
+ }
+ if (priv->reset) {
+ gpiod_set_value(priv->reset, 1);
+ dev_dbg(dev, "asserted RESET\n");
+ msleep(REALTEK_HW_STOP_DELAY);
+ gpiod_set_value(priv->reset, 0);
+ msleep(REALTEK_HW_START_DELAY);
+ dev_dbg(dev, "deasserted RESET\n");
+ }
+
+ /* Fetch MDIO pins */
+ priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->mdc))
+ return PTR_ERR(priv->mdc);
+ priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->mdio))
+ return PTR_ERR(priv->mdio);
+
+ priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+ ret = priv->ops->detect(priv);
+ if (ret) {
+ dev_err(dev, "unable to detect switch\n");
+ return ret;
+ }
+
+ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = dev;
+ priv->ds->num_ports = priv->num_ports;
+ priv->ds->priv = priv;
+
+ priv->ds->ops = var->ds_ops_smi;
+ ret = dsa_register_switch(priv->ds);
+ if (ret) {
+ dev_err_probe(dev, ret, "unable to register switch\n");
+ return ret;
+ }
+ return 0;
+}
+
+static int realtek_smi_remove(struct platform_device *pdev)
+{
+ struct realtek_priv *priv = platform_get_drvdata(pdev);
+
+ if (!priv)
+ return 0;
+
+ dsa_unregister_switch(priv->ds);
+ if (priv->slave_mii_bus)
+ of_node_put(priv->slave_mii_bus->dev.of_node);
+
+ /* leave the device reset asserted */
+ if (priv->reset)
+ gpiod_set_value(priv->reset, 1);
+
+ return 0;
+}
+
+static void realtek_smi_shutdown(struct platform_device *pdev)
+{
+ struct realtek_priv *priv = platform_get_drvdata(pdev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(priv->ds);
+
+ platform_set_drvdata(pdev, NULL);
+}
+
+static const struct of_device_id realtek_smi_of_match[] = {
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
+ {
+ .compatible = "realtek,rtl8366rb",
+ .data = &rtl8366rb_variant,
+ },
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
+ {
+ .compatible = "realtek,rtl8365mb",
+ .data = &rtl8365mb_variant,
+ },
+#endif
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
+
+static struct platform_driver realtek_smi_driver = {
+ .driver = {
+ .name = "realtek-smi",
+ .of_match_table = of_match_ptr(realtek_smi_of_match),
+ },
+ .probe = realtek_smi_probe,
+ .remove = realtek_smi_remove,
+ .shutdown = realtek_smi_shutdown,
+};
+module_platform_driver(realtek_smi_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
new file mode 100644
index 000000000..4fa7c6ba8
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Realtek SMI interface driver defines
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#ifndef _REALTEK_H
+#define _REALTEK_H
+
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <net/dsa.h>
+
+#define REALTEK_HW_STOP_DELAY 25 /* msecs */
+#define REALTEK_HW_START_DELAY 100 /* msecs */
+
+struct realtek_ops;
+struct dentry;
+struct inode;
+struct file;
+
+struct rtl8366_mib_counter {
+ unsigned int base;
+ unsigned int offset;
+ unsigned int length;
+ const char *name;
+};
+
+/*
+ * struct rtl8366_vlan_mc - Virtual LAN member configuration
+ */
+struct rtl8366_vlan_mc {
+ u16 vid;
+ u16 untag;
+ u16 member;
+ u8 fid;
+ u8 priority;
+};
+
+struct rtl8366_vlan_4k {
+ u16 vid;
+ u16 untag;
+ u16 member;
+ u8 fid;
+};
+
+struct realtek_priv {
+ struct device *dev;
+ struct gpio_desc *reset;
+ struct gpio_desc *mdc;
+ struct gpio_desc *mdio;
+ struct regmap *map;
+ struct regmap *map_nolock;
+ struct mutex map_lock;
+ struct mii_bus *slave_mii_bus;
+ struct mii_bus *bus;
+ int mdio_addr;
+
+ unsigned int clk_delay;
+ u8 cmd_read;
+ u8 cmd_write;
+ spinlock_t lock; /* Locks around command writes */
+ struct dsa_switch *ds;
+ struct irq_domain *irqdomain;
+ bool leds_disabled;
+
+ unsigned int cpu_port;
+ unsigned int num_ports;
+ unsigned int num_vlan_mc;
+ unsigned int num_mib_counters;
+ struct rtl8366_mib_counter *mib_counters;
+
+ const struct realtek_ops *ops;
+ int (*setup_interface)(struct dsa_switch *ds);
+ int (*write_reg_noack)(void *ctx, u32 addr, u32 data);
+
+ int vlan_enabled;
+ int vlan4k_enabled;
+
+ char buf[4096];
+ void *chip_data; /* Per-chip extra variant data */
+};
+
+/*
+ * struct realtek_ops - vtable for the per-SMI-chiptype operations
+ * @detect: detects the chiptype
+ */
+struct realtek_ops {
+ int (*detect)(struct realtek_priv *priv);
+ int (*reset_chip)(struct realtek_priv *priv);
+ int (*setup)(struct realtek_priv *priv);
+ void (*cleanup)(struct realtek_priv *priv);
+ int (*get_mib_counter)(struct realtek_priv *priv,
+ int port,
+ struct rtl8366_mib_counter *mib,
+ u64 *mibvalue);
+ int (*get_vlan_mc)(struct realtek_priv *priv, u32 index,
+ struct rtl8366_vlan_mc *vlanmc);
+ int (*set_vlan_mc)(struct realtek_priv *priv, u32 index,
+ const struct rtl8366_vlan_mc *vlanmc);
+ int (*get_vlan_4k)(struct realtek_priv *priv, u32 vid,
+ struct rtl8366_vlan_4k *vlan4k);
+ int (*set_vlan_4k)(struct realtek_priv *priv,
+ const struct rtl8366_vlan_4k *vlan4k);
+ int (*get_mc_index)(struct realtek_priv *priv, int port, int *val);
+ int (*set_mc_index)(struct realtek_priv *priv, int port, int index);
+ bool (*is_vlan_valid)(struct realtek_priv *priv, unsigned int vlan);
+ int (*enable_vlan)(struct realtek_priv *priv, bool enable);
+ int (*enable_vlan4k)(struct realtek_priv *priv, bool enable);
+ int (*enable_port)(struct realtek_priv *priv, int port, bool enable);
+ int (*phy_read)(struct realtek_priv *priv, int phy, int regnum);
+ int (*phy_write)(struct realtek_priv *priv, int phy, int regnum,
+ u16 val);
+};
+
+struct realtek_variant {
+ const struct dsa_switch_ops *ds_ops_smi;
+ const struct dsa_switch_ops *ds_ops_mdio;
+ const struct realtek_ops *ops;
+ unsigned int clk_delay;
+ u8 cmd_read;
+ u8 cmd_write;
+ size_t chip_data_sz;
+};
+
+/* RTL8366 library helpers */
+int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used);
+int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member,
+ u32 untag, u32 fid);
+int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port,
+ unsigned int vid);
+int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable);
+int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable);
+int rtl8366_reset_vlan(struct realtek_priv *priv);
+int rtl8366_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack);
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data);
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset);
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
+
+extern const struct realtek_variant rtl8366rb_variant;
+extern const struct realtek_variant rtl8365mb_variant;
+
+#endif /* _REALTEK_H */
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
new file mode 100644
index 000000000..da31d8b83
--- /dev/null
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -0,0 +1,2148 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI subdriver for the Realtek RTL8365MB-VC ethernet switch.
+ *
+ * Copyright (C) 2021 Alvin Šipraga <alsi@bang-olufsen.dk>
+ * Copyright (C) 2021 Michael Rasmussen <mir@bang-olufsen.dk>
+ *
+ * The RTL8365MB-VC is a 4+1 port 10/100/1000M switch controller. It includes 4
+ * integrated PHYs for the user facing ports, and an extension interface which
+ * can be connected to the CPU - or another PHY - via either MII, RMII, or
+ * RGMII. The switch is configured via the Realtek Simple Management Interface
+ * (SMI), which uses the MDIO/MDC lines.
+ *
+ * Below is a simplified block diagram of the chip and its relevant interfaces.
+ *
+ * .-----------------------------------.
+ * | |
+ * UTP <---------------> Giga PHY <-> PCS <-> P0 GMAC |
+ * UTP <---------------> Giga PHY <-> PCS <-> P1 GMAC |
+ * UTP <---------------> Giga PHY <-> PCS <-> P2 GMAC |
+ * UTP <---------------> Giga PHY <-> PCS <-> P3 GMAC |
+ * | |
+ * CPU/PHY <-MII/RMII/RGMII---> Extension <---> Extension |
+ * | interface 1 GMAC 1 |
+ * | |
+ * SMI driver/ <-MDC/SCL---> Management ~~~~~~~~~~~~~~ |
+ * EEPROM <-MDIO/SDA--> interface ~REALTEK ~~~~~ |
+ * | ~RTL8365MB ~~~ |
+ * | ~GXXXC TAIWAN~ |
+ * GPIO <--------------> Reset ~~~~~~~~~~~~~~ |
+ * | |
+ * Interrupt <----------> Link UP/DOWN events |
+ * controller | |
+ * '-----------------------------------'
+ *
+ * The driver uses DSA to integrate the 4 user and 1 extension ports into the
+ * kernel. Netdevices are created for the user ports, as are PHY devices for
+ * their integrated PHYs. The device tree firmware should also specify the link
+ * partner of the extension port - either via a fixed-link or other phy-handle.
+ * See the device tree bindings for more detailed information. Note that the
+ * driver has only been tested with a fixed-link, but in principle it should not
+ * matter.
+ *
+ * NOTE: Currently, only the RGMII interface is implemented in this driver.
+ *
+ * The interrupt line is asserted on link UP/DOWN events. The driver creates a
+ * custom irqchip to handle this interrupt and demultiplex the events by reading
+ * the status registers via SMI. Interrupts are then propagated to the relevant
+ * PHY device.
+ *
+ * The EEPROM contains initial register values which the chip will read over I2C
+ * upon hardware reset. It is also possible to omit the EEPROM. In both cases,
+ * the driver will manually reprogram some registers using jam tables to reach
+ * an initial state defined by the vendor driver.
+ *
+ * This Linux driver is written based on an OS-agnostic vendor driver from
+ * Realtek. The reference GPL-licensed sources can be found in the OpenWrt
+ * source tree under the name rtl8367c. The vendor driver claims to support a
+ * number of similar switch controllers from Realtek, but the only hardware we
+ * have is the RTL8365MB-VC. Moreover, there does not seem to be any chip under
+ * the name RTL8367C. Although one wishes that the 'C' stood for some kind of
+ * common hardware revision, there exist examples of chips with the suffix -VC
+ * which are explicitly not supported by the rtl8367c driver and which instead
+ * require the rtl8367d vendor driver. With all this uncertainty, the driver has
+ * been modestly named rtl8365mb. Future implementors may wish to rename things
+ * accordingly.
+ *
+ * In the same family of chips, some carry up to 8 user ports and up to 2
+ * extension ports. Where possible this driver tries to make things generic, but
+ * more work must be done to support these configurations. According to
+ * documentation from Realtek, the family should include the following chips:
+ *
+ * - RTL8363NB
+ * - RTL8363NB-VB
+ * - RTL8363SC
+ * - RTL8363SC-VB
+ * - RTL8364NB
+ * - RTL8364NB-VB
+ * - RTL8365MB-VC
+ * - RTL8366SC
+ * - RTL8367RB-VB
+ * - RTL8367SB
+ * - RTL8367S
+ * - RTL8370MB
+ * - RTL8310SR
+ *
+ * Some of the register logic for these additional chips has been skipped over
+ * while implementing this driver. It is therefore not possible to assume that
+ * things will work out-of-the-box for other chips, and a careful review of the
+ * vendor driver may be needed to expand support. The RTL8365MB-VC seems to be
+ * one of the simpler chips.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/mutex.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/if_bridge.h>
+
+#include "realtek.h"
+
+/* Family-specific data and limits */
+#define RTL8365MB_PHYADDRMAX 7
+#define RTL8365MB_NUM_PHYREGS 32
+#define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1)
+#define RTL8365MB_MAX_NUM_PORTS 11
+#define RTL8365MB_MAX_NUM_EXTINTS 3
+#define RTL8365MB_LEARN_LIMIT_MAX 2112
+
+/* Chip identification registers */
+#define RTL8365MB_CHIP_ID_REG 0x1300
+
+#define RTL8365MB_CHIP_VER_REG 0x1301
+
+#define RTL8365MB_MAGIC_REG 0x13C2
+#define RTL8365MB_MAGIC_VALUE 0x0249
+
+/* Chip reset register */
+#define RTL8365MB_CHIP_RESET_REG 0x1322
+#define RTL8365MB_CHIP_RESET_SW_MASK 0x0002
+#define RTL8365MB_CHIP_RESET_HW_MASK 0x0001
+
+/* Interrupt polarity register */
+#define RTL8365MB_INTR_POLARITY_REG 0x1100
+#define RTL8365MB_INTR_POLARITY_MASK 0x0001
+#define RTL8365MB_INTR_POLARITY_HIGH 0
+#define RTL8365MB_INTR_POLARITY_LOW 1
+
+/* Interrupt control/status register - enable/check specific interrupt types */
+#define RTL8365MB_INTR_CTRL_REG 0x1101
+#define RTL8365MB_INTR_STATUS_REG 0x1102
+#define RTL8365MB_INTR_SLIENT_START_2_MASK 0x1000
+#define RTL8365MB_INTR_SLIENT_START_MASK 0x0800
+#define RTL8365MB_INTR_ACL_ACTION_MASK 0x0200
+#define RTL8365MB_INTR_CABLE_DIAG_FIN_MASK 0x0100
+#define RTL8365MB_INTR_INTERRUPT_8051_MASK 0x0080
+#define RTL8365MB_INTR_LOOP_DETECTION_MASK 0x0040
+#define RTL8365MB_INTR_GREEN_TIMER_MASK 0x0020
+#define RTL8365MB_INTR_SPECIAL_CONGEST_MASK 0x0010
+#define RTL8365MB_INTR_SPEED_CHANGE_MASK 0x0008
+#define RTL8365MB_INTR_LEARN_OVER_MASK 0x0004
+#define RTL8365MB_INTR_METER_EXCEEDED_MASK 0x0002
+#define RTL8365MB_INTR_LINK_CHANGE_MASK 0x0001
+#define RTL8365MB_INTR_ALL_MASK \
+ (RTL8365MB_INTR_SLIENT_START_2_MASK | \
+ RTL8365MB_INTR_SLIENT_START_MASK | \
+ RTL8365MB_INTR_ACL_ACTION_MASK | \
+ RTL8365MB_INTR_CABLE_DIAG_FIN_MASK | \
+ RTL8365MB_INTR_INTERRUPT_8051_MASK | \
+ RTL8365MB_INTR_LOOP_DETECTION_MASK | \
+ RTL8365MB_INTR_GREEN_TIMER_MASK | \
+ RTL8365MB_INTR_SPECIAL_CONGEST_MASK | \
+ RTL8365MB_INTR_SPEED_CHANGE_MASK | \
+ RTL8365MB_INTR_LEARN_OVER_MASK | \
+ RTL8365MB_INTR_METER_EXCEEDED_MASK | \
+ RTL8365MB_INTR_LINK_CHANGE_MASK)
+
+/* Per-port interrupt type status registers */
+#define RTL8365MB_PORT_LINKDOWN_IND_REG 0x1106
+#define RTL8365MB_PORT_LINKDOWN_IND_MASK 0x07FF
+
+#define RTL8365MB_PORT_LINKUP_IND_REG 0x1107
+#define RTL8365MB_PORT_LINKUP_IND_MASK 0x07FF
+
+/* PHY indirect access registers */
+#define RTL8365MB_INDIRECT_ACCESS_CTRL_REG 0x1F00
+#define RTL8365MB_INDIRECT_ACCESS_CTRL_RW_MASK 0x0002
+#define RTL8365MB_INDIRECT_ACCESS_CTRL_RW_READ 0
+#define RTL8365MB_INDIRECT_ACCESS_CTRL_RW_WRITE 1
+#define RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_MASK 0x0001
+#define RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_VALUE 1
+#define RTL8365MB_INDIRECT_ACCESS_STATUS_REG 0x1F01
+#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG 0x1F02
+#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK GENMASK(4, 0)
+#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(7, 5)
+#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK GENMASK(11, 8)
+#define RTL8365MB_PHY_BASE 0x2000
+#define RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG 0x1F03
+#define RTL8365MB_INDIRECT_ACCESS_READ_DATA_REG 0x1F04
+
+/* PHY OCP address prefix register */
+#define RTL8365MB_GPHY_OCP_MSB_0_REG 0x1D15
+#define RTL8365MB_GPHY_OCP_MSB_0_CFG_CPU_OCPADR_MASK 0x0FC0
+#define RTL8365MB_PHY_OCP_ADDR_PREFIX_MASK 0xFC00
+
+/* The PHY OCP addresses of PHY registers 0~31 start here */
+#define RTL8365MB_PHY_OCP_ADDR_PHYREG_BASE 0xA400
+
+/* External interface port mode values - used in DIGITAL_INTERFACE_SELECT */
+#define RTL8365MB_EXT_PORT_MODE_DISABLE 0
+#define RTL8365MB_EXT_PORT_MODE_RGMII 1
+#define RTL8365MB_EXT_PORT_MODE_MII_MAC 2
+#define RTL8365MB_EXT_PORT_MODE_MII_PHY 3
+#define RTL8365MB_EXT_PORT_MODE_TMII_MAC 4
+#define RTL8365MB_EXT_PORT_MODE_TMII_PHY 5
+#define RTL8365MB_EXT_PORT_MODE_GMII 6
+#define RTL8365MB_EXT_PORT_MODE_RMII_MAC 7
+#define RTL8365MB_EXT_PORT_MODE_RMII_PHY 8
+#define RTL8365MB_EXT_PORT_MODE_SGMII 9
+#define RTL8365MB_EXT_PORT_MODE_HSGMII 10
+#define RTL8365MB_EXT_PORT_MODE_1000X_100FX 11
+#define RTL8365MB_EXT_PORT_MODE_1000X 12
+#define RTL8365MB_EXT_PORT_MODE_100FX 13
+
+/* External interface mode configuration registers 0~1 */
+#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT1 */
+#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 0x13C3 /* EXT2 */
+#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(_extint) \
+ ((_extint) == 1 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 : \
+ (_extint) == 2 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 : \
+ 0x0)
+#define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(_extint) \
+ (0xF << (((_extint) % 2)))
+#define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_OFFSET(_extint) \
+ (((_extint) % 2) * 4)
+
+/* External interface RGMII TX/RX delay configuration registers 0~2 */
+#define RTL8365MB_EXT_RGMXF_REG0 0x1306 /* EXT0 */
+#define RTL8365MB_EXT_RGMXF_REG1 0x1307 /* EXT1 */
+#define RTL8365MB_EXT_RGMXF_REG2 0x13C5 /* EXT2 */
+#define RTL8365MB_EXT_RGMXF_REG(_extint) \
+ ((_extint) == 0 ? RTL8365MB_EXT_RGMXF_REG0 : \
+ (_extint) == 1 ? RTL8365MB_EXT_RGMXF_REG1 : \
+ (_extint) == 2 ? RTL8365MB_EXT_RGMXF_REG2 : \
+ 0x0)
+#define RTL8365MB_EXT_RGMXF_RXDELAY_MASK 0x0007
+#define RTL8365MB_EXT_RGMXF_TXDELAY_MASK 0x0008
+
+/* External interface port speed values - used in DIGITAL_INTERFACE_FORCE */
+#define RTL8365MB_PORT_SPEED_10M 0
+#define RTL8365MB_PORT_SPEED_100M 1
+#define RTL8365MB_PORT_SPEED_1000M 2
+
+/* External interface force configuration registers 0~2 */
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG0 0x1310 /* EXT0 */
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG1 0x1311 /* EXT1 */
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG2 0x13C4 /* EXT2 */
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG(_extint) \
+ ((_extint) == 0 ? RTL8365MB_DIGITAL_INTERFACE_FORCE_REG0 : \
+ (_extint) == 1 ? RTL8365MB_DIGITAL_INTERFACE_FORCE_REG1 : \
+ (_extint) == 2 ? RTL8365MB_DIGITAL_INTERFACE_FORCE_REG2 : \
+ 0x0)
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_EN_MASK 0x1000
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_NWAY_MASK 0x0080
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_TXPAUSE_MASK 0x0040
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_RXPAUSE_MASK 0x0020
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_LINK_MASK 0x0010
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_DUPLEX_MASK 0x0004
+#define RTL8365MB_DIGITAL_INTERFACE_FORCE_SPEED_MASK 0x0003
+
+/* CPU port mask register - controls which ports are treated as CPU ports */
+#define RTL8365MB_CPU_PORT_MASK_REG 0x1219
+#define RTL8365MB_CPU_PORT_MASK_MASK 0x07FF
+
+/* CPU control register */
+#define RTL8365MB_CPU_CTRL_REG 0x121A
+#define RTL8365MB_CPU_CTRL_TRAP_PORT_EXT_MASK 0x0400
+#define RTL8365MB_CPU_CTRL_TAG_FORMAT_MASK 0x0200
+#define RTL8365MB_CPU_CTRL_RXBYTECOUNT_MASK 0x0080
+#define RTL8365MB_CPU_CTRL_TAG_POSITION_MASK 0x0040
+#define RTL8365MB_CPU_CTRL_TRAP_PORT_MASK 0x0038
+#define RTL8365MB_CPU_CTRL_INSERTMODE_MASK 0x0006
+#define RTL8365MB_CPU_CTRL_EN_MASK 0x0001
+
+/* Maximum packet length register */
+#define RTL8365MB_CFG0_MAX_LEN_REG 0x088C
+#define RTL8365MB_CFG0_MAX_LEN_MASK 0x3FFF
+
+/* Port learning limit registers */
+#define RTL8365MB_LUT_PORT_LEARN_LIMIT_BASE 0x0A20
+#define RTL8365MB_LUT_PORT_LEARN_LIMIT_REG(_physport) \
+ (RTL8365MB_LUT_PORT_LEARN_LIMIT_BASE + (_physport))
+
+/* Port isolation (forwarding mask) registers */
+#define RTL8365MB_PORT_ISOLATION_REG_BASE 0x08A2
+#define RTL8365MB_PORT_ISOLATION_REG(_physport) \
+ (RTL8365MB_PORT_ISOLATION_REG_BASE + (_physport))
+#define RTL8365MB_PORT_ISOLATION_MASK 0x07FF
+
+/* MSTP port state registers - indexed by tree instance */
+#define RTL8365MB_MSTI_CTRL_BASE 0x0A00
+#define RTL8365MB_MSTI_CTRL_REG(_msti, _physport) \
+ (RTL8365MB_MSTI_CTRL_BASE + ((_msti) << 1) + ((_physport) >> 3))
+#define RTL8365MB_MSTI_CTRL_PORT_STATE_OFFSET(_physport) ((_physport) << 1)
+#define RTL8365MB_MSTI_CTRL_PORT_STATE_MASK(_physport) \
+ (0x3 << RTL8365MB_MSTI_CTRL_PORT_STATE_OFFSET((_physport)))
+
+/* MIB counter value registers */
+#define RTL8365MB_MIB_COUNTER_BASE 0x1000
+#define RTL8365MB_MIB_COUNTER_REG(_x) (RTL8365MB_MIB_COUNTER_BASE + (_x))
+
+/* MIB counter address register */
+#define RTL8365MB_MIB_ADDRESS_REG 0x1004
+#define RTL8365MB_MIB_ADDRESS_PORT_OFFSET 0x007C
+#define RTL8365MB_MIB_ADDRESS(_p, _x) \
+ (((RTL8365MB_MIB_ADDRESS_PORT_OFFSET) * (_p) + (_x)) >> 2)
+
+#define RTL8365MB_MIB_CTRL0_REG 0x1005
+#define RTL8365MB_MIB_CTRL0_RESET_MASK 0x0002
+#define RTL8365MB_MIB_CTRL0_BUSY_MASK 0x0001
+
+/* The DSA callback .get_stats64 runs in atomic context, so we are not allowed
+ * to block. On the other hand, accessing MIB counters absolutely requires us to
+ * block. The solution is thus to schedule work which polls the MIB counters
+ * asynchronously and updates some private data, which the callback can then
+ * fetch atomically. Three seconds should be a good enough polling interval.
+ */
+#define RTL8365MB_STATS_INTERVAL_JIFFIES (3 * HZ)
+
+enum rtl8365mb_mib_counter_index {
+ RTL8365MB_MIB_ifInOctets,
+ RTL8365MB_MIB_dot3StatsFCSErrors,
+ RTL8365MB_MIB_dot3StatsSymbolErrors,
+ RTL8365MB_MIB_dot3InPauseFrames,
+ RTL8365MB_MIB_dot3ControlInUnknownOpcodes,
+ RTL8365MB_MIB_etherStatsFragments,
+ RTL8365MB_MIB_etherStatsJabbers,
+ RTL8365MB_MIB_ifInUcastPkts,
+ RTL8365MB_MIB_etherStatsDropEvents,
+ RTL8365MB_MIB_ifInMulticastPkts,
+ RTL8365MB_MIB_ifInBroadcastPkts,
+ RTL8365MB_MIB_inMldChecksumError,
+ RTL8365MB_MIB_inIgmpChecksumError,
+ RTL8365MB_MIB_inMldSpecificQuery,
+ RTL8365MB_MIB_inMldGeneralQuery,
+ RTL8365MB_MIB_inIgmpSpecificQuery,
+ RTL8365MB_MIB_inIgmpGeneralQuery,
+ RTL8365MB_MIB_inMldLeaves,
+ RTL8365MB_MIB_inIgmpLeaves,
+ RTL8365MB_MIB_etherStatsOctets,
+ RTL8365MB_MIB_etherStatsUnderSizePkts,
+ RTL8365MB_MIB_etherOversizeStats,
+ RTL8365MB_MIB_etherStatsPkts64Octets,
+ RTL8365MB_MIB_etherStatsPkts65to127Octets,
+ RTL8365MB_MIB_etherStatsPkts128to255Octets,
+ RTL8365MB_MIB_etherStatsPkts256to511Octets,
+ RTL8365MB_MIB_etherStatsPkts512to1023Octets,
+ RTL8365MB_MIB_etherStatsPkts1024to1518Octets,
+ RTL8365MB_MIB_ifOutOctets,
+ RTL8365MB_MIB_dot3StatsSingleCollisionFrames,
+ RTL8365MB_MIB_dot3StatsMultipleCollisionFrames,
+ RTL8365MB_MIB_dot3StatsDeferredTransmissions,
+ RTL8365MB_MIB_dot3StatsLateCollisions,
+ RTL8365MB_MIB_etherStatsCollisions,
+ RTL8365MB_MIB_dot3StatsExcessiveCollisions,
+ RTL8365MB_MIB_dot3OutPauseFrames,
+ RTL8365MB_MIB_ifOutDiscards,
+ RTL8365MB_MIB_dot1dTpPortInDiscards,
+ RTL8365MB_MIB_ifOutUcastPkts,
+ RTL8365MB_MIB_ifOutMulticastPkts,
+ RTL8365MB_MIB_ifOutBroadcastPkts,
+ RTL8365MB_MIB_outOampduPkts,
+ RTL8365MB_MIB_inOampduPkts,
+ RTL8365MB_MIB_inIgmpJoinsSuccess,
+ RTL8365MB_MIB_inIgmpJoinsFail,
+ RTL8365MB_MIB_inMldJoinsSuccess,
+ RTL8365MB_MIB_inMldJoinsFail,
+ RTL8365MB_MIB_inReportSuppressionDrop,
+ RTL8365MB_MIB_inLeaveSuppressionDrop,
+ RTL8365MB_MIB_outIgmpReports,
+ RTL8365MB_MIB_outIgmpLeaves,
+ RTL8365MB_MIB_outIgmpGeneralQuery,
+ RTL8365MB_MIB_outIgmpSpecificQuery,
+ RTL8365MB_MIB_outMldReports,
+ RTL8365MB_MIB_outMldLeaves,
+ RTL8365MB_MIB_outMldGeneralQuery,
+ RTL8365MB_MIB_outMldSpecificQuery,
+ RTL8365MB_MIB_inKnownMulticastPkts,
+ RTL8365MB_MIB_END,
+};
+
+struct rtl8365mb_mib_counter {
+ u32 offset;
+ u32 length;
+ const char *name;
+};
+
+#define RTL8365MB_MAKE_MIB_COUNTER(_offset, _length, _name) \
+ [RTL8365MB_MIB_ ## _name] = { _offset, _length, #_name }
+
+static struct rtl8365mb_mib_counter rtl8365mb_mib_counters[] = {
+ RTL8365MB_MAKE_MIB_COUNTER(0, 4, ifInOctets),
+ RTL8365MB_MAKE_MIB_COUNTER(4, 2, dot3StatsFCSErrors),
+ RTL8365MB_MAKE_MIB_COUNTER(6, 2, dot3StatsSymbolErrors),
+ RTL8365MB_MAKE_MIB_COUNTER(8, 2, dot3InPauseFrames),
+ RTL8365MB_MAKE_MIB_COUNTER(10, 2, dot3ControlInUnknownOpcodes),
+ RTL8365MB_MAKE_MIB_COUNTER(12, 2, etherStatsFragments),
+ RTL8365MB_MAKE_MIB_COUNTER(14, 2, etherStatsJabbers),
+ RTL8365MB_MAKE_MIB_COUNTER(16, 2, ifInUcastPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(18, 2, etherStatsDropEvents),
+ RTL8365MB_MAKE_MIB_COUNTER(20, 2, ifInMulticastPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(22, 2, ifInBroadcastPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(24, 2, inMldChecksumError),
+ RTL8365MB_MAKE_MIB_COUNTER(26, 2, inIgmpChecksumError),
+ RTL8365MB_MAKE_MIB_COUNTER(28, 2, inMldSpecificQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(30, 2, inMldGeneralQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(32, 2, inIgmpSpecificQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(34, 2, inIgmpGeneralQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(36, 2, inMldLeaves),
+ RTL8365MB_MAKE_MIB_COUNTER(38, 2, inIgmpLeaves),
+ RTL8365MB_MAKE_MIB_COUNTER(40, 4, etherStatsOctets),
+ RTL8365MB_MAKE_MIB_COUNTER(44, 2, etherStatsUnderSizePkts),
+ RTL8365MB_MAKE_MIB_COUNTER(46, 2, etherOversizeStats),
+ RTL8365MB_MAKE_MIB_COUNTER(48, 2, etherStatsPkts64Octets),
+ RTL8365MB_MAKE_MIB_COUNTER(50, 2, etherStatsPkts65to127Octets),
+ RTL8365MB_MAKE_MIB_COUNTER(52, 2, etherStatsPkts128to255Octets),
+ RTL8365MB_MAKE_MIB_COUNTER(54, 2, etherStatsPkts256to511Octets),
+ RTL8365MB_MAKE_MIB_COUNTER(56, 2, etherStatsPkts512to1023Octets),
+ RTL8365MB_MAKE_MIB_COUNTER(58, 2, etherStatsPkts1024to1518Octets),
+ RTL8365MB_MAKE_MIB_COUNTER(60, 4, ifOutOctets),
+ RTL8365MB_MAKE_MIB_COUNTER(64, 2, dot3StatsSingleCollisionFrames),
+ RTL8365MB_MAKE_MIB_COUNTER(66, 2, dot3StatsMultipleCollisionFrames),
+ RTL8365MB_MAKE_MIB_COUNTER(68, 2, dot3StatsDeferredTransmissions),
+ RTL8365MB_MAKE_MIB_COUNTER(70, 2, dot3StatsLateCollisions),
+ RTL8365MB_MAKE_MIB_COUNTER(72, 2, etherStatsCollisions),
+ RTL8365MB_MAKE_MIB_COUNTER(74, 2, dot3StatsExcessiveCollisions),
+ RTL8365MB_MAKE_MIB_COUNTER(76, 2, dot3OutPauseFrames),
+ RTL8365MB_MAKE_MIB_COUNTER(78, 2, ifOutDiscards),
+ RTL8365MB_MAKE_MIB_COUNTER(80, 2, dot1dTpPortInDiscards),
+ RTL8365MB_MAKE_MIB_COUNTER(82, 2, ifOutUcastPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(84, 2, ifOutMulticastPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(86, 2, ifOutBroadcastPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(88, 2, outOampduPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(90, 2, inOampduPkts),
+ RTL8365MB_MAKE_MIB_COUNTER(92, 4, inIgmpJoinsSuccess),
+ RTL8365MB_MAKE_MIB_COUNTER(96, 2, inIgmpJoinsFail),
+ RTL8365MB_MAKE_MIB_COUNTER(98, 2, inMldJoinsSuccess),
+ RTL8365MB_MAKE_MIB_COUNTER(100, 2, inMldJoinsFail),
+ RTL8365MB_MAKE_MIB_COUNTER(102, 2, inReportSuppressionDrop),
+ RTL8365MB_MAKE_MIB_COUNTER(104, 2, inLeaveSuppressionDrop),
+ RTL8365MB_MAKE_MIB_COUNTER(106, 2, outIgmpReports),
+ RTL8365MB_MAKE_MIB_COUNTER(108, 2, outIgmpLeaves),
+ RTL8365MB_MAKE_MIB_COUNTER(110, 2, outIgmpGeneralQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(112, 2, outIgmpSpecificQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(114, 2, outMldReports),
+ RTL8365MB_MAKE_MIB_COUNTER(116, 2, outMldLeaves),
+ RTL8365MB_MAKE_MIB_COUNTER(118, 2, outMldGeneralQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(120, 2, outMldSpecificQuery),
+ RTL8365MB_MAKE_MIB_COUNTER(122, 2, inKnownMulticastPkts),
+};
+
+static_assert(ARRAY_SIZE(rtl8365mb_mib_counters) == RTL8365MB_MIB_END);
+
+struct rtl8365mb_jam_tbl_entry {
+ u16 reg;
+ u16 val;
+};
+
+/* Lifted from the vendor driver sources */
+static const struct rtl8365mb_jam_tbl_entry rtl8365mb_init_jam_8365mb_vc[] = {
+ { 0x13EB, 0x15BB }, { 0x1303, 0x06D6 }, { 0x1304, 0x0700 },
+ { 0x13E2, 0x003F }, { 0x13F9, 0x0090 }, { 0x121E, 0x03CA },
+ { 0x1233, 0x0352 }, { 0x1237, 0x00A0 }, { 0x123A, 0x0030 },
+ { 0x1239, 0x0084 }, { 0x0301, 0x1000 }, { 0x1349, 0x001F },
+ { 0x18E0, 0x4004 }, { 0x122B, 0x241C }, { 0x1305, 0xC000 },
+ { 0x13F0, 0x0000 },
+};
+
+static const struct rtl8365mb_jam_tbl_entry rtl8365mb_init_jam_common[] = {
+ { 0x1200, 0x7FCB }, { 0x0884, 0x0003 }, { 0x06EB, 0x0001 },
+ { 0x03Fa, 0x0007 }, { 0x08C8, 0x00C0 }, { 0x0A30, 0x020E },
+ { 0x0800, 0x0000 }, { 0x0802, 0x0000 }, { 0x09DA, 0x0013 },
+ { 0x1D32, 0x0002 },
+};
+
+enum rtl8365mb_phy_interface_mode {
+ RTL8365MB_PHY_INTERFACE_MODE_INVAL = 0,
+ RTL8365MB_PHY_INTERFACE_MODE_INTERNAL = BIT(0),
+ RTL8365MB_PHY_INTERFACE_MODE_MII = BIT(1),
+ RTL8365MB_PHY_INTERFACE_MODE_TMII = BIT(2),
+ RTL8365MB_PHY_INTERFACE_MODE_RMII = BIT(3),
+ RTL8365MB_PHY_INTERFACE_MODE_RGMII = BIT(4),
+ RTL8365MB_PHY_INTERFACE_MODE_SGMII = BIT(5),
+ RTL8365MB_PHY_INTERFACE_MODE_HSGMII = BIT(6),
+};
+
+/**
+ * struct rtl8365mb_extint - external interface info
+ * @port: the port with an external interface
+ * @id: the external interface ID, which is either 0, 1, or 2
+ * @supported_interfaces: a bitmask of supported PHY interface modes
+ *
+ * Represents a mapping: port -> { id, supported_interfaces }. To be embedded
+ * in &struct rtl8365mb_chip_info for every port with an external interface.
+ */
+struct rtl8365mb_extint {
+ int port;
+ int id;
+ unsigned int supported_interfaces;
+};
+
+/**
+ * struct rtl8365mb_chip_info - static chip-specific info
+ * @name: human-readable chip name
+ * @chip_id: chip identifier
+ * @chip_ver: chip silicon revision
+ * @extints: available external interfaces
+ * @jam_table: chip-specific initialization jam table
+ * @jam_size: size of the chip's jam table
+ *
+ * These data are specific to a given chip in the family of switches supported
+ * by this driver. When adding support for another chip in the family, a new
+ * chip info should be added to the rtl8365mb_chip_infos array.
+ */
+struct rtl8365mb_chip_info {
+ const char *name;
+ u32 chip_id;
+ u32 chip_ver;
+ const struct rtl8365mb_extint extints[RTL8365MB_MAX_NUM_EXTINTS];
+ const struct rtl8365mb_jam_tbl_entry *jam_table;
+ size_t jam_size;
+};
+
+/* Chip info for each supported switch in the family */
+#define PHY_INTF(_mode) (RTL8365MB_PHY_INTERFACE_MODE_ ## _mode)
+static const struct rtl8365mb_chip_info rtl8365mb_chip_infos[] = {
+ {
+ .name = "RTL8365MB-VC",
+ .chip_id = 0x6367,
+ .chip_ver = 0x0040,
+ .extints = {
+ { 6, 1, PHY_INTF(MII) | PHY_INTF(TMII) |
+ PHY_INTF(RMII) | PHY_INTF(RGMII) },
+ },
+ .jam_table = rtl8365mb_init_jam_8365mb_vc,
+ .jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc),
+ },
+ {
+ .name = "RTL8367S",
+ .chip_id = 0x6367,
+ .chip_ver = 0x00A0,
+ .extints = {
+ { 6, 1, PHY_INTF(SGMII) | PHY_INTF(HSGMII) },
+ { 7, 2, PHY_INTF(MII) | PHY_INTF(TMII) |
+ PHY_INTF(RMII) | PHY_INTF(RGMII) },
+ },
+ .jam_table = rtl8365mb_init_jam_8365mb_vc,
+ .jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc),
+ },
+ {
+ .name = "RTL8367RB-VB",
+ .chip_id = 0x6367,
+ .chip_ver = 0x0020,
+ .extints = {
+ { 6, 1, PHY_INTF(MII) | PHY_INTF(TMII) |
+ PHY_INTF(RMII) | PHY_INTF(RGMII) },
+ { 7, 2, PHY_INTF(MII) | PHY_INTF(TMII) |
+ PHY_INTF(RMII) | PHY_INTF(RGMII) },
+ },
+ .jam_table = rtl8365mb_init_jam_8365mb_vc,
+ .jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc),
+ },
+};
+
+enum rtl8365mb_stp_state {
+ RTL8365MB_STP_STATE_DISABLED = 0,
+ RTL8365MB_STP_STATE_BLOCKING = 1,
+ RTL8365MB_STP_STATE_LEARNING = 2,
+ RTL8365MB_STP_STATE_FORWARDING = 3,
+};
+
+enum rtl8365mb_cpu_insert {
+ RTL8365MB_CPU_INSERT_TO_ALL = 0,
+ RTL8365MB_CPU_INSERT_TO_TRAPPING = 1,
+ RTL8365MB_CPU_INSERT_TO_NONE = 2,
+};
+
+enum rtl8365mb_cpu_position {
+ RTL8365MB_CPU_POS_AFTER_SA = 0,
+ RTL8365MB_CPU_POS_BEFORE_CRC = 1,
+};
+
+enum rtl8365mb_cpu_format {
+ RTL8365MB_CPU_FORMAT_8BYTES = 0,
+ RTL8365MB_CPU_FORMAT_4BYTES = 1,
+};
+
+enum rtl8365mb_cpu_rxlen {
+ RTL8365MB_CPU_RXLEN_72BYTES = 0,
+ RTL8365MB_CPU_RXLEN_64BYTES = 1,
+};
+
+/**
+ * struct rtl8365mb_cpu - CPU port configuration
+ * @enable: enable/disable hardware insertion of CPU tag in switch->CPU frames
+ * @mask: port mask of ports that parse should parse CPU tags
+ * @trap_port: forward trapped frames to this port
+ * @insert: CPU tag insertion mode in switch->CPU frames
+ * @position: position of CPU tag in frame
+ * @rx_length: minimum CPU RX length
+ * @format: CPU tag format
+ *
+ * Represents the CPU tagging and CPU port configuration of the switch. These
+ * settings are configurable at runtime.
+ */
+struct rtl8365mb_cpu {
+ bool enable;
+ u32 mask;
+ u32 trap_port;
+ enum rtl8365mb_cpu_insert insert;
+ enum rtl8365mb_cpu_position position;
+ enum rtl8365mb_cpu_rxlen rx_length;
+ enum rtl8365mb_cpu_format format;
+};
+
+/**
+ * struct rtl8365mb_port - private per-port data
+ * @priv: pointer to parent realtek_priv data
+ * @index: DSA port index, same as dsa_port::index
+ * @stats: link statistics populated by rtl8365mb_stats_poll, ready for atomic
+ * access via rtl8365mb_get_stats64
+ * @stats_lock: protect the stats structure during read/update
+ * @mib_work: delayed work for polling MIB counters
+ */
+struct rtl8365mb_port {
+ struct realtek_priv *priv;
+ unsigned int index;
+ struct rtnl_link_stats64 stats;
+ spinlock_t stats_lock;
+ struct delayed_work mib_work;
+};
+
+/**
+ * struct rtl8365mb - driver private data
+ * @priv: pointer to parent realtek_priv data
+ * @irq: registered IRQ or zero
+ * @chip_info: chip-specific info about the attached switch
+ * @cpu: CPU tagging and CPU port configuration for this chip
+ * @mib_lock: prevent concurrent reads of MIB counters
+ * @ports: per-port data
+ *
+ * Private data for this driver.
+ */
+struct rtl8365mb {
+ struct realtek_priv *priv;
+ int irq;
+ const struct rtl8365mb_chip_info *chip_info;
+ struct rtl8365mb_cpu cpu;
+ struct mutex mib_lock;
+ struct rtl8365mb_port ports[RTL8365MB_MAX_NUM_PORTS];
+};
+
+static int rtl8365mb_phy_poll_busy(struct realtek_priv *priv)
+{
+ u32 val;
+
+ return regmap_read_poll_timeout(priv->map_nolock,
+ RTL8365MB_INDIRECT_ACCESS_STATUS_REG,
+ val, !val, 10, 100);
+}
+
+static int rtl8365mb_phy_ocp_prepare(struct realtek_priv *priv, int phy,
+ u32 ocp_addr)
+{
+ u32 val;
+ int ret;
+
+ /* Set OCP prefix */
+ val = FIELD_GET(RTL8365MB_PHY_OCP_ADDR_PREFIX_MASK, ocp_addr);
+ ret = regmap_update_bits(
+ priv->map_nolock, RTL8365MB_GPHY_OCP_MSB_0_REG,
+ RTL8365MB_GPHY_OCP_MSB_0_CFG_CPU_OCPADR_MASK,
+ FIELD_PREP(RTL8365MB_GPHY_OCP_MSB_0_CFG_CPU_OCPADR_MASK, val));
+ if (ret)
+ return ret;
+
+ /* Set PHY register address */
+ val = RTL8365MB_PHY_BASE;
+ val |= FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK, phy);
+ val |= FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK,
+ ocp_addr >> 1);
+ val |= FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK,
+ ocp_addr >> 6);
+ ret = regmap_write(priv->map_nolock,
+ RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy,
+ u32 ocp_addr, u16 *data)
+{
+ u32 val;
+ int ret;
+
+ mutex_lock(&priv->map_lock);
+
+ ret = rtl8365mb_phy_poll_busy(priv);
+ if (ret)
+ goto out;
+
+ ret = rtl8365mb_phy_ocp_prepare(priv, phy, ocp_addr);
+ if (ret)
+ goto out;
+
+ /* Execute read operation */
+ val = FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_MASK,
+ RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_VALUE) |
+ FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_RW_MASK,
+ RTL8365MB_INDIRECT_ACCESS_CTRL_RW_READ);
+ ret = regmap_write(priv->map_nolock, RTL8365MB_INDIRECT_ACCESS_CTRL_REG,
+ val);
+ if (ret)
+ goto out;
+
+ ret = rtl8365mb_phy_poll_busy(priv);
+ if (ret)
+ goto out;
+
+ /* Get PHY register data */
+ ret = regmap_read(priv->map_nolock,
+ RTL8365MB_INDIRECT_ACCESS_READ_DATA_REG, &val);
+ if (ret)
+ goto out;
+
+ *data = val & 0xFFFF;
+
+out:
+ mutex_unlock(&priv->map_lock);
+
+ return ret;
+}
+
+static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy,
+ u32 ocp_addr, u16 data)
+{
+ u32 val;
+ int ret;
+
+ mutex_lock(&priv->map_lock);
+
+ ret = rtl8365mb_phy_poll_busy(priv);
+ if (ret)
+ goto out;
+
+ ret = rtl8365mb_phy_ocp_prepare(priv, phy, ocp_addr);
+ if (ret)
+ goto out;
+
+ /* Set PHY register data */
+ ret = regmap_write(priv->map_nolock,
+ RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG, data);
+ if (ret)
+ goto out;
+
+ /* Execute write operation */
+ val = FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_MASK,
+ RTL8365MB_INDIRECT_ACCESS_CTRL_CMD_VALUE) |
+ FIELD_PREP(RTL8365MB_INDIRECT_ACCESS_CTRL_RW_MASK,
+ RTL8365MB_INDIRECT_ACCESS_CTRL_RW_WRITE);
+ ret = regmap_write(priv->map_nolock, RTL8365MB_INDIRECT_ACCESS_CTRL_REG,
+ val);
+ if (ret)
+ goto out;
+
+ ret = rtl8365mb_phy_poll_busy(priv);
+ if (ret)
+ goto out;
+
+out:
+ mutex_unlock(&priv->map_lock);
+
+ return 0;
+}
+
+static int rtl8365mb_phy_read(struct realtek_priv *priv, int phy, int regnum)
+{
+ u32 ocp_addr;
+ u16 val;
+ int ret;
+
+ if (phy > RTL8365MB_PHYADDRMAX)
+ return -EINVAL;
+
+ if (regnum > RTL8365MB_PHYREGMAX)
+ return -EINVAL;
+
+ ocp_addr = RTL8365MB_PHY_OCP_ADDR_PHYREG_BASE + regnum * 2;
+
+ ret = rtl8365mb_phy_ocp_read(priv, phy, ocp_addr, &val);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to read PHY%d reg %02x @ %04x, ret %d\n", phy,
+ regnum, ocp_addr, ret);
+ return ret;
+ }
+
+ dev_dbg(priv->dev, "read PHY%d register 0x%02x @ %04x, val <- %04x\n",
+ phy, regnum, ocp_addr, val);
+
+ return val;
+}
+
+static int rtl8365mb_phy_write(struct realtek_priv *priv, int phy, int regnum,
+ u16 val)
+{
+ u32 ocp_addr;
+ int ret;
+
+ if (phy > RTL8365MB_PHYADDRMAX)
+ return -EINVAL;
+
+ if (regnum > RTL8365MB_PHYREGMAX)
+ return -EINVAL;
+
+ ocp_addr = RTL8365MB_PHY_OCP_ADDR_PHYREG_BASE + regnum * 2;
+
+ ret = rtl8365mb_phy_ocp_write(priv, phy, ocp_addr, val);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to write PHY%d reg %02x @ %04x, ret %d\n", phy,
+ regnum, ocp_addr, ret);
+ return ret;
+ }
+
+ dev_dbg(priv->dev, "write PHY%d register 0x%02x @ %04x, val -> %04x\n",
+ phy, regnum, ocp_addr, val);
+
+ return 0;
+}
+
+static int rtl8365mb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ return rtl8365mb_phy_read(ds->priv, phy, regnum);
+}
+
+static int rtl8365mb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum,
+ u16 val)
+{
+ return rtl8365mb_phy_write(ds->priv, phy, regnum, val);
+}
+
+static const struct rtl8365mb_extint *
+rtl8365mb_get_port_extint(struct realtek_priv *priv, int port)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ int i;
+
+ for (i = 0; i < RTL8365MB_MAX_NUM_EXTINTS; i++) {
+ const struct rtl8365mb_extint *extint =
+ &mb->chip_info->extints[i];
+
+ if (!extint->supported_interfaces)
+ continue;
+
+ if (extint->port == port)
+ return extint;
+ }
+
+ return NULL;
+}
+
+static enum dsa_tag_protocol
+rtl8365mb_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mp)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_cpu *cpu;
+ struct rtl8365mb *mb;
+
+ mb = priv->chip_data;
+ cpu = &mb->cpu;
+
+ if (cpu->position == RTL8365MB_CPU_POS_BEFORE_CRC)
+ return DSA_TAG_PROTO_RTL8_4T;
+
+ return DSA_TAG_PROTO_RTL8_4;
+}
+
+static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port,
+ phy_interface_t interface)
+{
+ const struct rtl8365mb_extint *extint =
+ rtl8365mb_get_port_extint(priv, port);
+ struct device_node *dn;
+ struct dsa_port *dp;
+ int tx_delay = 0;
+ int rx_delay = 0;
+ u32 val;
+ int ret;
+
+ if (!extint)
+ return -ENODEV;
+
+ dp = dsa_to_port(priv->ds, port);
+ dn = dp->dn;
+
+ /* Set the RGMII TX/RX delay
+ *
+ * The Realtek vendor driver indicates the following possible
+ * configuration settings:
+ *
+ * TX delay:
+ * 0 = no delay, 1 = 2 ns delay
+ * RX delay:
+ * 0 = no delay, 7 = maximum delay
+ * Each step is approximately 0.3 ns, so the maximum delay is about
+ * 2.1 ns.
+ *
+ * The vendor driver also states that this must be configured *before*
+ * forcing the external interface into a particular mode, which is done
+ * in the rtl8365mb_phylink_mac_link_{up,down} functions.
+ *
+ * Only configure an RGMII TX (resp. RX) delay if the
+ * tx-internal-delay-ps (resp. rx-internal-delay-ps) OF property is
+ * specified. We ignore the detail of the RGMII interface mode
+ * (RGMII_{RXID, TXID, etc.}), as this is considered to be a PHY-only
+ * property.
+ */
+ if (!of_property_read_u32(dn, "tx-internal-delay-ps", &val)) {
+ val = val / 1000; /* convert to ns */
+
+ if (val == 0 || val == 2)
+ tx_delay = val / 2;
+ else
+ dev_warn(priv->dev,
+ "RGMII TX delay must be 0 or 2 ns\n");
+ }
+
+ if (!of_property_read_u32(dn, "rx-internal-delay-ps", &val)) {
+ val = DIV_ROUND_CLOSEST(val, 300); /* convert to 0.3 ns step */
+
+ if (val <= 7)
+ rx_delay = val;
+ else
+ dev_warn(priv->dev,
+ "RGMII RX delay must be 0 to 2.1 ns\n");
+ }
+
+ ret = regmap_update_bits(
+ priv->map, RTL8365MB_EXT_RGMXF_REG(extint->id),
+ RTL8365MB_EXT_RGMXF_TXDELAY_MASK |
+ RTL8365MB_EXT_RGMXF_RXDELAY_MASK,
+ FIELD_PREP(RTL8365MB_EXT_RGMXF_TXDELAY_MASK, tx_delay) |
+ FIELD_PREP(RTL8365MB_EXT_RGMXF_RXDELAY_MASK, rx_delay));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(
+ priv->map, RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(extint->id),
+ RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(extint->id),
+ RTL8365MB_EXT_PORT_MODE_RGMII
+ << RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_OFFSET(
+ extint->id));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rtl8365mb_ext_config_forcemode(struct realtek_priv *priv, int port,
+ bool link, int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ const struct rtl8365mb_extint *extint =
+ rtl8365mb_get_port_extint(priv, port);
+ u32 r_tx_pause;
+ u32 r_rx_pause;
+ u32 r_duplex;
+ u32 r_speed;
+ u32 r_link;
+ int val;
+ int ret;
+
+ if (!extint)
+ return -ENODEV;
+
+ if (link) {
+ /* Force the link up with the desired configuration */
+ r_link = 1;
+ r_rx_pause = rx_pause ? 1 : 0;
+ r_tx_pause = tx_pause ? 1 : 0;
+
+ if (speed == SPEED_1000) {
+ r_speed = RTL8365MB_PORT_SPEED_1000M;
+ } else if (speed == SPEED_100) {
+ r_speed = RTL8365MB_PORT_SPEED_100M;
+ } else if (speed == SPEED_10) {
+ r_speed = RTL8365MB_PORT_SPEED_10M;
+ } else {
+ dev_err(priv->dev, "unsupported port speed %s\n",
+ phy_speed_to_str(speed));
+ return -EINVAL;
+ }
+
+ if (duplex == DUPLEX_FULL) {
+ r_duplex = 1;
+ } else if (duplex == DUPLEX_HALF) {
+ r_duplex = 0;
+ } else {
+ dev_err(priv->dev, "unsupported duplex %s\n",
+ phy_duplex_to_str(duplex));
+ return -EINVAL;
+ }
+ } else {
+ /* Force the link down and reset any programmed configuration */
+ r_link = 0;
+ r_tx_pause = 0;
+ r_rx_pause = 0;
+ r_speed = 0;
+ r_duplex = 0;
+ }
+
+ val = FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_EN_MASK, 1) |
+ FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_TXPAUSE_MASK,
+ r_tx_pause) |
+ FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_RXPAUSE_MASK,
+ r_rx_pause) |
+ FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_LINK_MASK, r_link) |
+ FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_DUPLEX_MASK,
+ r_duplex) |
+ FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_SPEED_MASK, r_speed);
+ ret = regmap_write(priv->map,
+ RTL8365MB_DIGITAL_INTERFACE_FORCE_REG(extint->id),
+ val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ const struct rtl8365mb_extint *extint =
+ rtl8365mb_get_port_extint(ds->priv, port);
+
+ config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000FD;
+
+ if (!extint) {
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+
+ /* GMII is the default interface mode for phylib, so
+ * we have to support it for ports with integrated PHY.
+ */
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ return;
+ }
+
+ /* Populate according to the modes supported by _this driver_,
+ * not necessarily the modes supported by the hardware, some of
+ * which remain unimplemented.
+ */
+
+ if (extint->supported_interfaces & RTL8365MB_PHY_INTERFACE_MODE_RGMII)
+ phy_interface_set_rgmii(config->supported_interfaces);
+}
+
+static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct realtek_priv *priv = ds->priv;
+ int ret;
+
+ if (mode != MLO_AN_PHY && mode != MLO_AN_FIXED) {
+ dev_err(priv->dev,
+ "port %d supports only conventional PHY or fixed-link\n",
+ port);
+ return;
+ }
+
+ if (phy_interface_mode_is_rgmii(state->interface)) {
+ ret = rtl8365mb_ext_config_rgmii(priv, port, state->interface);
+ if (ret)
+ dev_err(priv->dev,
+ "failed to configure RGMII mode on port %d: %d\n",
+ port, ret);
+ return;
+ }
+
+ /* TODO: Implement MII and RMII modes, which the RTL8365MB-VC also
+ * supports
+ */
+}
+
+static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_port *p;
+ struct rtl8365mb *mb;
+ int ret;
+
+ mb = priv->chip_data;
+ p = &mb->ports[port];
+ cancel_delayed_work_sync(&p->mib_work);
+
+ if (phy_interface_mode_is_rgmii(interface)) {
+ ret = rtl8365mb_ext_config_forcemode(priv, port, false, 0, 0,
+ false, false);
+ if (ret)
+ dev_err(priv->dev,
+ "failed to reset forced mode on port %d: %d\n",
+ port, ret);
+
+ return;
+ }
+}
+
+static void rtl8365mb_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev, int speed,
+ int duplex, bool tx_pause,
+ bool rx_pause)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_port *p;
+ struct rtl8365mb *mb;
+ int ret;
+
+ mb = priv->chip_data;
+ p = &mb->ports[port];
+ schedule_delayed_work(&p->mib_work, 0);
+
+ if (phy_interface_mode_is_rgmii(interface)) {
+ ret = rtl8365mb_ext_config_forcemode(priv, port, true, speed,
+ duplex, tx_pause,
+ rx_pause);
+ if (ret)
+ dev_err(priv->dev,
+ "failed to force mode on port %d: %d\n", port,
+ ret);
+
+ return;
+ }
+}
+
+static void rtl8365mb_port_stp_state_set(struct dsa_switch *ds, int port,
+ u8 state)
+{
+ struct realtek_priv *priv = ds->priv;
+ enum rtl8365mb_stp_state val;
+ int msti = 0;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ val = RTL8365MB_STP_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ case BR_STATE_LISTENING:
+ val = RTL8365MB_STP_STATE_BLOCKING;
+ break;
+ case BR_STATE_LEARNING:
+ val = RTL8365MB_STP_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ val = RTL8365MB_STP_STATE_FORWARDING;
+ break;
+ default:
+ dev_err(priv->dev, "invalid STP state: %u\n", state);
+ return;
+ }
+
+ regmap_update_bits(priv->map, RTL8365MB_MSTI_CTRL_REG(msti, port),
+ RTL8365MB_MSTI_CTRL_PORT_STATE_MASK(port),
+ val << RTL8365MB_MSTI_CTRL_PORT_STATE_OFFSET(port));
+}
+
+static int rtl8365mb_port_set_learning(struct realtek_priv *priv, int port,
+ bool enable)
+{
+ /* Enable/disable learning by limiting the number of L2 addresses the
+ * port can learn. Realtek documentation states that a limit of zero
+ * disables learning. When enabling learning, set it to the chip's
+ * maximum.
+ */
+ return regmap_write(priv->map, RTL8365MB_LUT_PORT_LEARN_LIMIT_REG(port),
+ enable ? RTL8365MB_LEARN_LIMIT_MAX : 0);
+}
+
+static int rtl8365mb_port_set_isolation(struct realtek_priv *priv, int port,
+ u32 mask)
+{
+ return regmap_write(priv->map, RTL8365MB_PORT_ISOLATION_REG(port), mask);
+}
+
+static int rtl8365mb_mib_counter_read(struct realtek_priv *priv, int port,
+ u32 offset, u32 length, u64 *mibvalue)
+{
+ u64 tmpvalue = 0;
+ u32 val;
+ int ret;
+ int i;
+
+ /* The MIB address is an SRAM address. We request a particular address
+ * and then poll the control register before reading the value from some
+ * counter registers.
+ */
+ ret = regmap_write(priv->map, RTL8365MB_MIB_ADDRESS_REG,
+ RTL8365MB_MIB_ADDRESS(port, offset));
+ if (ret)
+ return ret;
+
+ /* Poll for completion */
+ ret = regmap_read_poll_timeout(priv->map, RTL8365MB_MIB_CTRL0_REG, val,
+ !(val & RTL8365MB_MIB_CTRL0_BUSY_MASK),
+ 10, 100);
+ if (ret)
+ return ret;
+
+ /* Presumably this indicates a MIB counter read failure */
+ if (val & RTL8365MB_MIB_CTRL0_RESET_MASK)
+ return -EIO;
+
+ /* There are four MIB counter registers each holding a 16 bit word of a
+ * MIB counter. Depending on the offset, we should read from the upper
+ * two or lower two registers. In case the MIB counter is 4 words, we
+ * read from all four registers.
+ */
+ if (length == 4)
+ offset = 3;
+ else
+ offset = (offset + 1) % 4;
+
+ /* Read the MIB counter 16 bits at a time */
+ for (i = 0; i < length; i++) {
+ ret = regmap_read(priv->map,
+ RTL8365MB_MIB_COUNTER_REG(offset - i), &val);
+ if (ret)
+ return ret;
+
+ tmpvalue = ((tmpvalue) << 16) | (val & 0xFFFF);
+ }
+
+ /* Only commit the result if no error occurred */
+ *mibvalue = tmpvalue;
+
+ return 0;
+}
+
+static void rtl8365mb_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb *mb;
+ int ret;
+ int i;
+
+ mb = priv->chip_data;
+
+ mutex_lock(&mb->mib_lock);
+ for (i = 0; i < RTL8365MB_MIB_END; i++) {
+ struct rtl8365mb_mib_counter *mib = &rtl8365mb_mib_counters[i];
+
+ ret = rtl8365mb_mib_counter_read(priv, port, mib->offset,
+ mib->length, &data[i]);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to read port %d counters: %d\n", port,
+ ret);
+ break;
+ }
+ }
+ mutex_unlock(&mb->mib_lock);
+}
+
+static void rtl8365mb_get_strings(struct dsa_switch *ds, int port, u32 stringset, u8 *data)
+{
+ int i;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ for (i = 0; i < RTL8365MB_MIB_END; i++) {
+ struct rtl8365mb_mib_counter *mib = &rtl8365mb_mib_counters[i];
+
+ strncpy(data + i * ETH_GSTRING_LEN, mib->name, ETH_GSTRING_LEN);
+ }
+}
+
+static int rtl8365mb_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ if (sset != ETH_SS_STATS)
+ return -EOPNOTSUPP;
+
+ return RTL8365MB_MIB_END;
+}
+
+static void rtl8365mb_get_phy_stats(struct dsa_switch *ds, int port,
+ struct ethtool_eth_phy_stats *phy_stats)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_mib_counter *mib;
+ struct rtl8365mb *mb;
+
+ mb = priv->chip_data;
+ mib = &rtl8365mb_mib_counters[RTL8365MB_MIB_dot3StatsSymbolErrors];
+
+ mutex_lock(&mb->mib_lock);
+ rtl8365mb_mib_counter_read(priv, port, mib->offset, mib->length,
+ &phy_stats->SymbolErrorDuringCarrier);
+ mutex_unlock(&mb->mib_lock);
+}
+
+static void rtl8365mb_get_mac_stats(struct dsa_switch *ds, int port,
+ struct ethtool_eth_mac_stats *mac_stats)
+{
+ u64 cnt[RTL8365MB_MIB_END] = {
+ [RTL8365MB_MIB_ifOutOctets] = 1,
+ [RTL8365MB_MIB_ifOutUcastPkts] = 1,
+ [RTL8365MB_MIB_ifOutMulticastPkts] = 1,
+ [RTL8365MB_MIB_ifOutBroadcastPkts] = 1,
+ [RTL8365MB_MIB_dot3OutPauseFrames] = 1,
+ [RTL8365MB_MIB_ifOutDiscards] = 1,
+ [RTL8365MB_MIB_ifInOctets] = 1,
+ [RTL8365MB_MIB_ifInUcastPkts] = 1,
+ [RTL8365MB_MIB_ifInMulticastPkts] = 1,
+ [RTL8365MB_MIB_ifInBroadcastPkts] = 1,
+ [RTL8365MB_MIB_dot3InPauseFrames] = 1,
+ [RTL8365MB_MIB_dot3StatsSingleCollisionFrames] = 1,
+ [RTL8365MB_MIB_dot3StatsMultipleCollisionFrames] = 1,
+ [RTL8365MB_MIB_dot3StatsFCSErrors] = 1,
+ [RTL8365MB_MIB_dot3StatsDeferredTransmissions] = 1,
+ [RTL8365MB_MIB_dot3StatsLateCollisions] = 1,
+ [RTL8365MB_MIB_dot3StatsExcessiveCollisions] = 1,
+
+ };
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb *mb;
+ int ret;
+ int i;
+
+ mb = priv->chip_data;
+
+ mutex_lock(&mb->mib_lock);
+ for (i = 0; i < RTL8365MB_MIB_END; i++) {
+ struct rtl8365mb_mib_counter *mib = &rtl8365mb_mib_counters[i];
+
+ /* Only fetch required MIB counters (marked = 1 above) */
+ if (!cnt[i])
+ continue;
+
+ ret = rtl8365mb_mib_counter_read(priv, port, mib->offset,
+ mib->length, &cnt[i]);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&mb->mib_lock);
+
+ /* The RTL8365MB-VC exposes MIB objects, which we have to translate into
+ * IEEE 802.3 Managed Objects. This is not always completely faithful,
+ * but we try out best. See RFC 3635 for a detailed treatment of the
+ * subject.
+ */
+
+ mac_stats->FramesTransmittedOK = cnt[RTL8365MB_MIB_ifOutUcastPkts] +
+ cnt[RTL8365MB_MIB_ifOutMulticastPkts] +
+ cnt[RTL8365MB_MIB_ifOutBroadcastPkts] +
+ cnt[RTL8365MB_MIB_dot3OutPauseFrames] -
+ cnt[RTL8365MB_MIB_ifOutDiscards];
+ mac_stats->SingleCollisionFrames =
+ cnt[RTL8365MB_MIB_dot3StatsSingleCollisionFrames];
+ mac_stats->MultipleCollisionFrames =
+ cnt[RTL8365MB_MIB_dot3StatsMultipleCollisionFrames];
+ mac_stats->FramesReceivedOK = cnt[RTL8365MB_MIB_ifInUcastPkts] +
+ cnt[RTL8365MB_MIB_ifInMulticastPkts] +
+ cnt[RTL8365MB_MIB_ifInBroadcastPkts] +
+ cnt[RTL8365MB_MIB_dot3InPauseFrames];
+ mac_stats->FrameCheckSequenceErrors =
+ cnt[RTL8365MB_MIB_dot3StatsFCSErrors];
+ mac_stats->OctetsTransmittedOK = cnt[RTL8365MB_MIB_ifOutOctets] -
+ 18 * mac_stats->FramesTransmittedOK;
+ mac_stats->FramesWithDeferredXmissions =
+ cnt[RTL8365MB_MIB_dot3StatsDeferredTransmissions];
+ mac_stats->LateCollisions = cnt[RTL8365MB_MIB_dot3StatsLateCollisions];
+ mac_stats->FramesAbortedDueToXSColls =
+ cnt[RTL8365MB_MIB_dot3StatsExcessiveCollisions];
+ mac_stats->OctetsReceivedOK = cnt[RTL8365MB_MIB_ifInOctets] -
+ 18 * mac_stats->FramesReceivedOK;
+ mac_stats->MulticastFramesXmittedOK =
+ cnt[RTL8365MB_MIB_ifOutMulticastPkts];
+ mac_stats->BroadcastFramesXmittedOK =
+ cnt[RTL8365MB_MIB_ifOutBroadcastPkts];
+ mac_stats->MulticastFramesReceivedOK =
+ cnt[RTL8365MB_MIB_ifInMulticastPkts];
+ mac_stats->BroadcastFramesReceivedOK =
+ cnt[RTL8365MB_MIB_ifInBroadcastPkts];
+}
+
+static void rtl8365mb_get_ctrl_stats(struct dsa_switch *ds, int port,
+ struct ethtool_eth_ctrl_stats *ctrl_stats)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_mib_counter *mib;
+ struct rtl8365mb *mb;
+
+ mb = priv->chip_data;
+ mib = &rtl8365mb_mib_counters[RTL8365MB_MIB_dot3ControlInUnknownOpcodes];
+
+ mutex_lock(&mb->mib_lock);
+ rtl8365mb_mib_counter_read(priv, port, mib->offset, mib->length,
+ &ctrl_stats->UnsupportedOpcodesReceived);
+ mutex_unlock(&mb->mib_lock);
+}
+
+static void rtl8365mb_stats_update(struct realtek_priv *priv, int port)
+{
+ u64 cnt[RTL8365MB_MIB_END] = {
+ [RTL8365MB_MIB_ifOutOctets] = 1,
+ [RTL8365MB_MIB_ifOutUcastPkts] = 1,
+ [RTL8365MB_MIB_ifOutMulticastPkts] = 1,
+ [RTL8365MB_MIB_ifOutBroadcastPkts] = 1,
+ [RTL8365MB_MIB_ifOutDiscards] = 1,
+ [RTL8365MB_MIB_ifInOctets] = 1,
+ [RTL8365MB_MIB_ifInUcastPkts] = 1,
+ [RTL8365MB_MIB_ifInMulticastPkts] = 1,
+ [RTL8365MB_MIB_ifInBroadcastPkts] = 1,
+ [RTL8365MB_MIB_etherStatsDropEvents] = 1,
+ [RTL8365MB_MIB_etherStatsCollisions] = 1,
+ [RTL8365MB_MIB_etherStatsFragments] = 1,
+ [RTL8365MB_MIB_etherStatsJabbers] = 1,
+ [RTL8365MB_MIB_dot3StatsFCSErrors] = 1,
+ [RTL8365MB_MIB_dot3StatsLateCollisions] = 1,
+ };
+ struct rtl8365mb *mb = priv->chip_data;
+ struct rtnl_link_stats64 *stats;
+ int ret;
+ int i;
+
+ stats = &mb->ports[port].stats;
+
+ mutex_lock(&mb->mib_lock);
+ for (i = 0; i < RTL8365MB_MIB_END; i++) {
+ struct rtl8365mb_mib_counter *c = &rtl8365mb_mib_counters[i];
+
+ /* Only fetch required MIB counters (marked = 1 above) */
+ if (!cnt[i])
+ continue;
+
+ ret = rtl8365mb_mib_counter_read(priv, port, c->offset,
+ c->length, &cnt[i]);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&mb->mib_lock);
+
+ /* Don't update statistics if there was an error reading the counters */
+ if (ret)
+ return;
+
+ spin_lock(&mb->ports[port].stats_lock);
+
+ stats->rx_packets = cnt[RTL8365MB_MIB_ifInUcastPkts] +
+ cnt[RTL8365MB_MIB_ifInMulticastPkts] +
+ cnt[RTL8365MB_MIB_ifInBroadcastPkts] -
+ cnt[RTL8365MB_MIB_ifOutDiscards];
+
+ stats->tx_packets = cnt[RTL8365MB_MIB_ifOutUcastPkts] +
+ cnt[RTL8365MB_MIB_ifOutMulticastPkts] +
+ cnt[RTL8365MB_MIB_ifOutBroadcastPkts];
+
+ /* if{In,Out}Octets includes FCS - remove it */
+ stats->rx_bytes = cnt[RTL8365MB_MIB_ifInOctets] - 4 * stats->rx_packets;
+ stats->tx_bytes =
+ cnt[RTL8365MB_MIB_ifOutOctets] - 4 * stats->tx_packets;
+
+ stats->rx_dropped = cnt[RTL8365MB_MIB_etherStatsDropEvents];
+ stats->tx_dropped = cnt[RTL8365MB_MIB_ifOutDiscards];
+
+ stats->multicast = cnt[RTL8365MB_MIB_ifInMulticastPkts];
+ stats->collisions = cnt[RTL8365MB_MIB_etherStatsCollisions];
+
+ stats->rx_length_errors = cnt[RTL8365MB_MIB_etherStatsFragments] +
+ cnt[RTL8365MB_MIB_etherStatsJabbers];
+ stats->rx_crc_errors = cnt[RTL8365MB_MIB_dot3StatsFCSErrors];
+ stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors;
+
+ stats->tx_aborted_errors = cnt[RTL8365MB_MIB_ifOutDiscards];
+ stats->tx_window_errors = cnt[RTL8365MB_MIB_dot3StatsLateCollisions];
+ stats->tx_errors = stats->tx_aborted_errors + stats->tx_window_errors;
+
+ spin_unlock(&mb->ports[port].stats_lock);
+}
+
+static void rtl8365mb_stats_poll(struct work_struct *work)
+{
+ struct rtl8365mb_port *p = container_of(to_delayed_work(work),
+ struct rtl8365mb_port,
+ mib_work);
+ struct realtek_priv *priv = p->priv;
+
+ rtl8365mb_stats_update(priv, p->index);
+
+ schedule_delayed_work(&p->mib_work, RTL8365MB_STATS_INTERVAL_JIFFIES);
+}
+
+static void rtl8365mb_get_stats64(struct dsa_switch *ds, int port,
+ struct rtnl_link_stats64 *s)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_port *p;
+ struct rtl8365mb *mb;
+
+ mb = priv->chip_data;
+ p = &mb->ports[port];
+
+ spin_lock(&p->stats_lock);
+ memcpy(s, &p->stats, sizeof(*s));
+ spin_unlock(&p->stats_lock);
+}
+
+static void rtl8365mb_stats_setup(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ int i;
+
+ /* Per-chip global mutex to protect MIB counter access, since doing
+ * so requires accessing a series of registers in a particular order.
+ */
+ mutex_init(&mb->mib_lock);
+
+ for (i = 0; i < priv->num_ports; i++) {
+ struct rtl8365mb_port *p = &mb->ports[i];
+
+ if (dsa_is_unused_port(priv->ds, i))
+ continue;
+
+ /* Per-port spinlock to protect the stats64 data */
+ spin_lock_init(&p->stats_lock);
+
+ /* This work polls the MIB counters and keeps the stats64 data
+ * up-to-date.
+ */
+ INIT_DELAYED_WORK(&p->mib_work, rtl8365mb_stats_poll);
+ }
+}
+
+static void rtl8365mb_stats_teardown(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ int i;
+
+ for (i = 0; i < priv->num_ports; i++) {
+ struct rtl8365mb_port *p = &mb->ports[i];
+
+ if (dsa_is_unused_port(priv->ds, i))
+ continue;
+
+ cancel_delayed_work_sync(&p->mib_work);
+ }
+}
+
+static int rtl8365mb_get_and_clear_status_reg(struct realtek_priv *priv, u32 reg,
+ u32 *val)
+{
+ int ret;
+
+ ret = regmap_read(priv->map, reg, val);
+ if (ret)
+ return ret;
+
+ return regmap_write(priv->map, reg, *val);
+}
+
+static irqreturn_t rtl8365mb_irq(int irq, void *data)
+{
+ struct realtek_priv *priv = data;
+ unsigned long line_changes = 0;
+ u32 stat;
+ int line;
+ int ret;
+
+ ret = rtl8365mb_get_and_clear_status_reg(priv, RTL8365MB_INTR_STATUS_REG,
+ &stat);
+ if (ret)
+ goto out_error;
+
+ if (stat & RTL8365MB_INTR_LINK_CHANGE_MASK) {
+ u32 linkdown_ind;
+ u32 linkup_ind;
+ u32 val;
+
+ ret = rtl8365mb_get_and_clear_status_reg(
+ priv, RTL8365MB_PORT_LINKUP_IND_REG, &val);
+ if (ret)
+ goto out_error;
+
+ linkup_ind = FIELD_GET(RTL8365MB_PORT_LINKUP_IND_MASK, val);
+
+ ret = rtl8365mb_get_and_clear_status_reg(
+ priv, RTL8365MB_PORT_LINKDOWN_IND_REG, &val);
+ if (ret)
+ goto out_error;
+
+ linkdown_ind = FIELD_GET(RTL8365MB_PORT_LINKDOWN_IND_MASK, val);
+
+ line_changes = linkup_ind | linkdown_ind;
+ }
+
+ if (!line_changes)
+ goto out_none;
+
+ for_each_set_bit(line, &line_changes, priv->num_ports) {
+ int child_irq = irq_find_mapping(priv->irqdomain, line);
+
+ handle_nested_irq(child_irq);
+ }
+
+ return IRQ_HANDLED;
+
+out_error:
+ dev_err(priv->dev, "failed to read interrupt status: %d\n", ret);
+
+out_none:
+ return IRQ_NONE;
+}
+
+static struct irq_chip rtl8365mb_irq_chip = {
+ .name = "rtl8365mb",
+ /* The hardware doesn't support masking IRQs on a per-port basis */
+};
+
+static int rtl8365mb_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, domain->host_data);
+ irq_set_chip_and_handler(irq, &rtl8365mb_irq_chip, handle_simple_irq);
+ irq_set_nested_thread(irq, 1);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static void rtl8365mb_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_set_nested_thread(irq, 0);
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops rtl8365mb_irqdomain_ops = {
+ .map = rtl8365mb_irq_map,
+ .unmap = rtl8365mb_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int rtl8365mb_set_irq_enable(struct realtek_priv *priv, bool enable)
+{
+ return regmap_update_bits(priv->map, RTL8365MB_INTR_CTRL_REG,
+ RTL8365MB_INTR_LINK_CHANGE_MASK,
+ FIELD_PREP(RTL8365MB_INTR_LINK_CHANGE_MASK,
+ enable ? 1 : 0));
+}
+
+static int rtl8365mb_irq_enable(struct realtek_priv *priv)
+{
+ return rtl8365mb_set_irq_enable(priv, true);
+}
+
+static int rtl8365mb_irq_disable(struct realtek_priv *priv)
+{
+ return rtl8365mb_set_irq_enable(priv, false);
+}
+
+static int rtl8365mb_irq_setup(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ struct device_node *intc;
+ u32 irq_trig;
+ int virq;
+ int irq;
+ u32 val;
+ int ret;
+ int i;
+
+ intc = of_get_child_by_name(priv->dev->of_node, "interrupt-controller");
+ if (!intc) {
+ dev_err(priv->dev, "missing child interrupt-controller node\n");
+ return -EINVAL;
+ }
+
+ /* rtl8365mb IRQs cascade off this one */
+ irq = of_irq_get(intc, 0);
+ if (irq <= 0) {
+ if (irq != -EPROBE_DEFER)
+ dev_err(priv->dev, "failed to get parent irq: %d\n",
+ irq);
+ ret = irq ? irq : -EINVAL;
+ goto out_put_node;
+ }
+
+ priv->irqdomain = irq_domain_add_linear(intc, priv->num_ports,
+ &rtl8365mb_irqdomain_ops, priv);
+ if (!priv->irqdomain) {
+ dev_err(priv->dev, "failed to add irq domain\n");
+ ret = -ENOMEM;
+ goto out_put_node;
+ }
+
+ for (i = 0; i < priv->num_ports; i++) {
+ virq = irq_create_mapping(priv->irqdomain, i);
+ if (!virq) {
+ dev_err(priv->dev,
+ "failed to create irq domain mapping\n");
+ ret = -EINVAL;
+ goto out_remove_irqdomain;
+ }
+
+ irq_set_parent(virq, irq);
+ }
+
+ /* Configure chip interrupt signal polarity */
+ irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+ switch (irq_trig) {
+ case IRQF_TRIGGER_RISING:
+ case IRQF_TRIGGER_HIGH:
+ val = RTL8365MB_INTR_POLARITY_HIGH;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ case IRQF_TRIGGER_LOW:
+ val = RTL8365MB_INTR_POLARITY_LOW;
+ break;
+ default:
+ dev_err(priv->dev, "unsupported irq trigger type %u\n",
+ irq_trig);
+ ret = -EINVAL;
+ goto out_remove_irqdomain;
+ }
+
+ ret = regmap_update_bits(priv->map, RTL8365MB_INTR_POLARITY_REG,
+ RTL8365MB_INTR_POLARITY_MASK,
+ FIELD_PREP(RTL8365MB_INTR_POLARITY_MASK, val));
+ if (ret)
+ goto out_remove_irqdomain;
+
+ /* Disable the interrupt in case the chip has it enabled on reset */
+ ret = rtl8365mb_irq_disable(priv);
+ if (ret)
+ goto out_remove_irqdomain;
+
+ /* Clear the interrupt status register */
+ ret = regmap_write(priv->map, RTL8365MB_INTR_STATUS_REG,
+ RTL8365MB_INTR_ALL_MASK);
+ if (ret)
+ goto out_remove_irqdomain;
+
+ ret = request_threaded_irq(irq, NULL, rtl8365mb_irq, IRQF_ONESHOT,
+ "rtl8365mb", priv);
+ if (ret) {
+ dev_err(priv->dev, "failed to request irq: %d\n", ret);
+ goto out_remove_irqdomain;
+ }
+
+ /* Store the irq so that we know to free it during teardown */
+ mb->irq = irq;
+
+ ret = rtl8365mb_irq_enable(priv);
+ if (ret)
+ goto out_free_irq;
+
+ of_node_put(intc);
+
+ return 0;
+
+out_free_irq:
+ free_irq(mb->irq, priv);
+ mb->irq = 0;
+
+out_remove_irqdomain:
+ for (i = 0; i < priv->num_ports; i++) {
+ virq = irq_find_mapping(priv->irqdomain, i);
+ irq_dispose_mapping(virq);
+ }
+
+ irq_domain_remove(priv->irqdomain);
+ priv->irqdomain = NULL;
+
+out_put_node:
+ of_node_put(intc);
+
+ return ret;
+}
+
+static void rtl8365mb_irq_teardown(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ int virq;
+ int i;
+
+ if (mb->irq) {
+ free_irq(mb->irq, priv);
+ mb->irq = 0;
+ }
+
+ if (priv->irqdomain) {
+ for (i = 0; i < priv->num_ports; i++) {
+ virq = irq_find_mapping(priv->irqdomain, i);
+ irq_dispose_mapping(virq);
+ }
+
+ irq_domain_remove(priv->irqdomain);
+ priv->irqdomain = NULL;
+ }
+}
+
+static int rtl8365mb_cpu_config(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ struct rtl8365mb_cpu *cpu = &mb->cpu;
+ u32 val;
+ int ret;
+
+ ret = regmap_update_bits(priv->map, RTL8365MB_CPU_PORT_MASK_REG,
+ RTL8365MB_CPU_PORT_MASK_MASK,
+ FIELD_PREP(RTL8365MB_CPU_PORT_MASK_MASK,
+ cpu->mask));
+ if (ret)
+ return ret;
+
+ val = FIELD_PREP(RTL8365MB_CPU_CTRL_EN_MASK, cpu->enable ? 1 : 0) |
+ FIELD_PREP(RTL8365MB_CPU_CTRL_INSERTMODE_MASK, cpu->insert) |
+ FIELD_PREP(RTL8365MB_CPU_CTRL_TAG_POSITION_MASK, cpu->position) |
+ FIELD_PREP(RTL8365MB_CPU_CTRL_RXBYTECOUNT_MASK, cpu->rx_length) |
+ FIELD_PREP(RTL8365MB_CPU_CTRL_TAG_FORMAT_MASK, cpu->format) |
+ FIELD_PREP(RTL8365MB_CPU_CTRL_TRAP_PORT_MASK, cpu->trap_port & 0x7) |
+ FIELD_PREP(RTL8365MB_CPU_CTRL_TRAP_PORT_EXT_MASK,
+ cpu->trap_port >> 3 & 0x1);
+ ret = regmap_write(priv->map, RTL8365MB_CPU_CTRL_REG, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rtl8365mb_change_tag_protocol(struct dsa_switch *ds,
+ enum dsa_tag_protocol proto)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_cpu *cpu;
+ struct rtl8365mb *mb;
+
+ mb = priv->chip_data;
+ cpu = &mb->cpu;
+
+ switch (proto) {
+ case DSA_TAG_PROTO_RTL8_4:
+ cpu->format = RTL8365MB_CPU_FORMAT_8BYTES;
+ cpu->position = RTL8365MB_CPU_POS_AFTER_SA;
+ break;
+ case DSA_TAG_PROTO_RTL8_4T:
+ cpu->format = RTL8365MB_CPU_FORMAT_8BYTES;
+ cpu->position = RTL8365MB_CPU_POS_BEFORE_CRC;
+ break;
+ /* The switch also supports a 4-byte format, similar to rtl4a but with
+ * the same 0x04 8-bit version and probably 8-bit port source/dest.
+ * There is no public doc about it. Not supported yet and it will probably
+ * never be.
+ */
+ default:
+ return -EPROTONOSUPPORT;
+ }
+
+ return rtl8365mb_cpu_config(priv);
+}
+
+static int rtl8365mb_switch_init(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ const struct rtl8365mb_chip_info *ci;
+ int ret;
+ int i;
+
+ ci = mb->chip_info;
+
+ /* Do any chip-specific init jam before getting to the common stuff */
+ if (ci->jam_table) {
+ for (i = 0; i < ci->jam_size; i++) {
+ ret = regmap_write(priv->map, ci->jam_table[i].reg,
+ ci->jam_table[i].val);
+ if (ret)
+ return ret;
+ }
+ }
+
+ /* Common init jam */
+ for (i = 0; i < ARRAY_SIZE(rtl8365mb_init_jam_common); i++) {
+ ret = regmap_write(priv->map, rtl8365mb_init_jam_common[i].reg,
+ rtl8365mb_init_jam_common[i].val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rtl8365mb_reset_chip(struct realtek_priv *priv)
+{
+ u32 val;
+
+ priv->write_reg_noack(priv, RTL8365MB_CHIP_RESET_REG,
+ FIELD_PREP(RTL8365MB_CHIP_RESET_HW_MASK, 1));
+
+ /* Realtek documentation says the chip needs 1 second to reset. Sleep
+ * for 100 ms before accessing any registers to prevent ACK timeouts.
+ */
+ msleep(100);
+ return regmap_read_poll_timeout(priv->map, RTL8365MB_CHIP_RESET_REG, val,
+ !(val & RTL8365MB_CHIP_RESET_HW_MASK),
+ 20000, 1e6);
+}
+
+static int rtl8365mb_setup(struct dsa_switch *ds)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8365mb_cpu *cpu;
+ struct dsa_port *cpu_dp;
+ struct rtl8365mb *mb;
+ int ret;
+ int i;
+
+ mb = priv->chip_data;
+ cpu = &mb->cpu;
+
+ ret = rtl8365mb_reset_chip(priv);
+ if (ret) {
+ dev_err(priv->dev, "failed to reset chip: %d\n", ret);
+ goto out_error;
+ }
+
+ /* Configure switch to vendor-defined initial state */
+ ret = rtl8365mb_switch_init(priv);
+ if (ret) {
+ dev_err(priv->dev, "failed to initialize switch: %d\n", ret);
+ goto out_error;
+ }
+
+ /* Set up cascading IRQs */
+ ret = rtl8365mb_irq_setup(priv);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ else if (ret)
+ dev_info(priv->dev, "no interrupt support\n");
+
+ /* Configure CPU tagging */
+ dsa_switch_for_each_cpu_port(cpu_dp, priv->ds) {
+ cpu->mask |= BIT(cpu_dp->index);
+
+ if (cpu->trap_port == RTL8365MB_MAX_NUM_PORTS)
+ cpu->trap_port = cpu_dp->index;
+ }
+ cpu->enable = cpu->mask > 0;
+ ret = rtl8365mb_cpu_config(priv);
+ if (ret)
+ goto out_teardown_irq;
+
+ /* Configure ports */
+ for (i = 0; i < priv->num_ports; i++) {
+ struct rtl8365mb_port *p = &mb->ports[i];
+
+ if (dsa_is_unused_port(priv->ds, i))
+ continue;
+
+ /* Forward only to the CPU */
+ ret = rtl8365mb_port_set_isolation(priv, i, cpu->mask);
+ if (ret)
+ goto out_teardown_irq;
+
+ /* Disable learning */
+ ret = rtl8365mb_port_set_learning(priv, i, false);
+ if (ret)
+ goto out_teardown_irq;
+
+ /* Set the initial STP state of all ports to DISABLED, otherwise
+ * ports will still forward frames to the CPU despite being
+ * administratively down by default.
+ */
+ rtl8365mb_port_stp_state_set(priv->ds, i, BR_STATE_DISABLED);
+
+ /* Set up per-port private data */
+ p->priv = priv;
+ p->index = i;
+ }
+
+ /* Set maximum packet length to 1536 bytes */
+ ret = regmap_update_bits(priv->map, RTL8365MB_CFG0_MAX_LEN_REG,
+ RTL8365MB_CFG0_MAX_LEN_MASK,
+ FIELD_PREP(RTL8365MB_CFG0_MAX_LEN_MASK, 1536));
+ if (ret)
+ goto out_teardown_irq;
+
+ if (priv->setup_interface) {
+ ret = priv->setup_interface(ds);
+ if (ret) {
+ dev_err(priv->dev, "could not set up MDIO bus\n");
+ goto out_teardown_irq;
+ }
+ }
+
+ /* Start statistics counter polling */
+ rtl8365mb_stats_setup(priv);
+
+ return 0;
+
+out_teardown_irq:
+ rtl8365mb_irq_teardown(priv);
+
+out_error:
+ return ret;
+}
+
+static void rtl8365mb_teardown(struct dsa_switch *ds)
+{
+ struct realtek_priv *priv = ds->priv;
+
+ rtl8365mb_stats_teardown(priv);
+ rtl8365mb_irq_teardown(priv);
+}
+
+static int rtl8365mb_get_chip_id_and_ver(struct regmap *map, u32 *id, u32 *ver)
+{
+ int ret;
+
+ /* For some reason we have to write a magic value to an arbitrary
+ * register whenever accessing the chip ID/version registers.
+ */
+ ret = regmap_write(map, RTL8365MB_MAGIC_REG, RTL8365MB_MAGIC_VALUE);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, RTL8365MB_CHIP_ID_REG, id);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, RTL8365MB_CHIP_VER_REG, ver);
+ if (ret)
+ return ret;
+
+ /* Reset magic register */
+ ret = regmap_write(map, RTL8365MB_MAGIC_REG, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rtl8365mb_detect(struct realtek_priv *priv)
+{
+ struct rtl8365mb *mb = priv->chip_data;
+ u32 chip_id;
+ u32 chip_ver;
+ int ret;
+ int i;
+
+ ret = rtl8365mb_get_chip_id_and_ver(priv->map, &chip_id, &chip_ver);
+ if (ret) {
+ dev_err(priv->dev, "failed to read chip id and version: %d\n",
+ ret);
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(rtl8365mb_chip_infos); i++) {
+ const struct rtl8365mb_chip_info *ci = &rtl8365mb_chip_infos[i];
+
+ if (ci->chip_id == chip_id && ci->chip_ver == chip_ver) {
+ mb->chip_info = ci;
+ break;
+ }
+ }
+
+ if (!mb->chip_info) {
+ dev_err(priv->dev,
+ "unrecognized switch (id=0x%04x, ver=0x%04x)", chip_id,
+ chip_ver);
+ return -ENODEV;
+ }
+
+ dev_info(priv->dev, "found an %s switch\n", mb->chip_info->name);
+
+ priv->num_ports = RTL8365MB_MAX_NUM_PORTS;
+ mb->priv = priv;
+ mb->cpu.trap_port = RTL8365MB_MAX_NUM_PORTS;
+ mb->cpu.insert = RTL8365MB_CPU_INSERT_TO_ALL;
+ mb->cpu.position = RTL8365MB_CPU_POS_AFTER_SA;
+ mb->cpu.rx_length = RTL8365MB_CPU_RXLEN_64BYTES;
+ mb->cpu.format = RTL8365MB_CPU_FORMAT_8BYTES;
+
+ return 0;
+}
+
+static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
+ .get_tag_protocol = rtl8365mb_get_tag_protocol,
+ .change_tag_protocol = rtl8365mb_change_tag_protocol,
+ .setup = rtl8365mb_setup,
+ .teardown = rtl8365mb_teardown,
+ .phylink_get_caps = rtl8365mb_phylink_get_caps,
+ .phylink_mac_config = rtl8365mb_phylink_mac_config,
+ .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
+ .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
+ .port_stp_state_set = rtl8365mb_port_stp_state_set,
+ .get_strings = rtl8365mb_get_strings,
+ .get_ethtool_stats = rtl8365mb_get_ethtool_stats,
+ .get_sset_count = rtl8365mb_get_sset_count,
+ .get_eth_phy_stats = rtl8365mb_get_phy_stats,
+ .get_eth_mac_stats = rtl8365mb_get_mac_stats,
+ .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats,
+ .get_stats64 = rtl8365mb_get_stats64,
+};
+
+static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = {
+ .get_tag_protocol = rtl8365mb_get_tag_protocol,
+ .change_tag_protocol = rtl8365mb_change_tag_protocol,
+ .setup = rtl8365mb_setup,
+ .teardown = rtl8365mb_teardown,
+ .phylink_get_caps = rtl8365mb_phylink_get_caps,
+ .phylink_mac_config = rtl8365mb_phylink_mac_config,
+ .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
+ .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
+ .phy_read = rtl8365mb_dsa_phy_read,
+ .phy_write = rtl8365mb_dsa_phy_write,
+ .port_stp_state_set = rtl8365mb_port_stp_state_set,
+ .get_strings = rtl8365mb_get_strings,
+ .get_ethtool_stats = rtl8365mb_get_ethtool_stats,
+ .get_sset_count = rtl8365mb_get_sset_count,
+ .get_eth_phy_stats = rtl8365mb_get_phy_stats,
+ .get_eth_mac_stats = rtl8365mb_get_mac_stats,
+ .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats,
+ .get_stats64 = rtl8365mb_get_stats64,
+};
+
+static const struct realtek_ops rtl8365mb_ops = {
+ .detect = rtl8365mb_detect,
+ .phy_read = rtl8365mb_phy_read,
+ .phy_write = rtl8365mb_phy_write,
+};
+
+const struct realtek_variant rtl8365mb_variant = {
+ .ds_ops_smi = &rtl8365mb_switch_ops_smi,
+ .ds_ops_mdio = &rtl8365mb_switch_ops_mdio,
+ .ops = &rtl8365mb_ops,
+ .clk_delay = 10,
+ .cmd_read = 0xb9,
+ .cmd_write = 0xb8,
+ .chip_data_sz = sizeof(struct rtl8365mb),
+};
+EXPORT_SYMBOL_GPL(rtl8365mb_variant);
+
+MODULE_AUTHOR("Alvin Šipraga <alsi@bang-olufsen.dk>");
+MODULE_DESCRIPTION("Driver for RTL8365MB-VC ethernet switch");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c
new file mode 100644
index 000000000..dc5f75be3
--- /dev/null
+++ b/drivers/net/dsa/realtek/rtl8366-core.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI library helpers for the RTL8366x variants
+ * RTL8366RB and RTL8366S
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ */
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+
+#include "realtek.h"
+
+int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used)
+{
+ int ret;
+ int i;
+
+ *used = 0;
+ for (i = 0; i < priv->num_ports; i++) {
+ int index = 0;
+
+ ret = priv->ops->get_mc_index(priv, i, &index);
+ if (ret)
+ return ret;
+
+ if (mc_index == index) {
+ *used = 1;
+ break;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
+
+/**
+ * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
+ * @priv: the Realtek SMI device instance
+ * @vid: the VLAN ID to look up or allocate
+ * @vlanmc: the pointer will be assigned to a pointer to a valid member config
+ * if successful
+ * @return: index of a new member config or negative error number
+ */
+static int rtl8366_obtain_mc(struct realtek_priv *priv, int vid,
+ struct rtl8366_vlan_mc *vlanmc)
+{
+ struct rtl8366_vlan_4k vlan4k;
+ int ret;
+ int i;
+
+ /* Try to find an existing member config entry for this VID */
+ for (i = 0; i < priv->num_vlan_mc; i++) {
+ ret = priv->ops->get_vlan_mc(priv, i, vlanmc);
+ if (ret) {
+ dev_err(priv->dev, "error searching for VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ if (vid == vlanmc->vid)
+ return i;
+ }
+
+ /* We have no MC entry for this VID, try to find an empty one */
+ for (i = 0; i < priv->num_vlan_mc; i++) {
+ ret = priv->ops->get_vlan_mc(priv, i, vlanmc);
+ if (ret) {
+ dev_err(priv->dev, "error searching for VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ if (vlanmc->vid == 0 && vlanmc->member == 0) {
+ /* Update the entry from the 4K table */
+ ret = priv->ops->get_vlan_4k(priv, vid, &vlan4k);
+ if (ret) {
+ dev_err(priv->dev, "error looking for 4K VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ vlanmc->vid = vid;
+ vlanmc->member = vlan4k.member;
+ vlanmc->untag = vlan4k.untag;
+ vlanmc->fid = vlan4k.fid;
+ ret = priv->ops->set_vlan_mc(priv, i, vlanmc);
+ if (ret) {
+ dev_err(priv->dev, "unable to set/update VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+
+ dev_dbg(priv->dev, "created new MC at index %d for VID %d\n",
+ i, vid);
+ return i;
+ }
+ }
+
+ /* MC table is full, try to find an unused entry and replace it */
+ for (i = 0; i < priv->num_vlan_mc; i++) {
+ int used;
+
+ ret = rtl8366_mc_is_used(priv, i, &used);
+ if (ret)
+ return ret;
+
+ if (!used) {
+ /* Update the entry from the 4K table */
+ ret = priv->ops->get_vlan_4k(priv, vid, &vlan4k);
+ if (ret)
+ return ret;
+
+ vlanmc->vid = vid;
+ vlanmc->member = vlan4k.member;
+ vlanmc->untag = vlan4k.untag;
+ vlanmc->fid = vlan4k.fid;
+ ret = priv->ops->set_vlan_mc(priv, i, vlanmc);
+ if (ret) {
+ dev_err(priv->dev, "unable to set/update VLAN MC %d for VID %d\n",
+ i, vid);
+ return ret;
+ }
+ dev_dbg(priv->dev, "recycled MC at index %i for VID %d\n",
+ i, vid);
+ return i;
+ }
+ }
+
+ dev_err(priv->dev, "all VLAN member configurations are in use\n");
+ return -ENOSPC;
+}
+
+int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member,
+ u32 untag, u32 fid)
+{
+ struct rtl8366_vlan_mc vlanmc;
+ struct rtl8366_vlan_4k vlan4k;
+ int mc;
+ int ret;
+
+ if (!priv->ops->is_vlan_valid(priv, vid))
+ return -EINVAL;
+
+ dev_dbg(priv->dev,
+ "setting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
+ vid, member, untag);
+
+ /* Update the 4K table */
+ ret = priv->ops->get_vlan_4k(priv, vid, &vlan4k);
+ if (ret)
+ return ret;
+
+ vlan4k.member |= member;
+ vlan4k.untag |= untag;
+ vlan4k.fid = fid;
+ ret = priv->ops->set_vlan_4k(priv, &vlan4k);
+ if (ret)
+ return ret;
+
+ dev_dbg(priv->dev,
+ "resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
+ vid, vlan4k.member, vlan4k.untag);
+
+ /* Find or allocate a member config for this VID */
+ ret = rtl8366_obtain_mc(priv, vid, &vlanmc);
+ if (ret < 0)
+ return ret;
+ mc = ret;
+
+ /* Update the MC entry */
+ vlanmc.member |= member;
+ vlanmc.untag |= untag;
+ vlanmc.fid = fid;
+
+ /* Commit updates to the MC entry */
+ ret = priv->ops->set_vlan_mc(priv, mc, &vlanmc);
+ if (ret)
+ dev_err(priv->dev, "failed to commit changes to VLAN MC index %d for VID %d\n",
+ mc, vid);
+ else
+ dev_dbg(priv->dev,
+ "resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
+ vid, vlanmc.member, vlanmc.untag);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
+
+int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port,
+ unsigned int vid)
+{
+ struct rtl8366_vlan_mc vlanmc;
+ int mc;
+ int ret;
+
+ if (!priv->ops->is_vlan_valid(priv, vid))
+ return -EINVAL;
+
+ /* Find or allocate a member config for this VID */
+ ret = rtl8366_obtain_mc(priv, vid, &vlanmc);
+ if (ret < 0)
+ return ret;
+ mc = ret;
+
+ ret = priv->ops->set_mc_index(priv, port, mc);
+ if (ret) {
+ dev_err(priv->dev, "set PVID: failed to set MC index %d for port %d\n",
+ mc, port);
+ return ret;
+ }
+
+ dev_dbg(priv->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n",
+ port, vid, mc);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
+
+int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable)
+{
+ int ret;
+
+ /* To enable 4k VLAN, ordinary VLAN must be enabled first,
+ * but if we disable 4k VLAN it is fine to leave ordinary
+ * VLAN enabled.
+ */
+ if (enable) {
+ /* Make sure VLAN is ON */
+ ret = priv->ops->enable_vlan(priv, true);
+ if (ret)
+ return ret;
+
+ priv->vlan_enabled = true;
+ }
+
+ ret = priv->ops->enable_vlan4k(priv, enable);
+ if (ret)
+ return ret;
+
+ priv->vlan4k_enabled = enable;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k);
+
+int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable)
+{
+ int ret;
+
+ ret = priv->ops->enable_vlan(priv, enable);
+ if (ret)
+ return ret;
+
+ priv->vlan_enabled = enable;
+
+ /* If we turn VLAN off, make sure that we turn off
+ * 4k VLAN as well, if that happened to be on.
+ */
+ if (!enable) {
+ priv->vlan4k_enabled = false;
+ ret = priv->ops->enable_vlan4k(priv, false);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan);
+
+int rtl8366_reset_vlan(struct realtek_priv *priv)
+{
+ struct rtl8366_vlan_mc vlanmc;
+ int ret;
+ int i;
+
+ rtl8366_enable_vlan(priv, false);
+ rtl8366_enable_vlan4k(priv, false);
+
+ /* Clear the 16 VLAN member configurations */
+ vlanmc.vid = 0;
+ vlanmc.priority = 0;
+ vlanmc.member = 0;
+ vlanmc.untag = 0;
+ vlanmc.fid = 0;
+ for (i = 0; i < priv->num_vlan_mc; i++) {
+ ret = priv->ops->set_vlan_mc(priv, i, &vlanmc);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
+
+int rtl8366_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+{
+ bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+ bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID);
+ struct realtek_priv *priv = ds->priv;
+ u32 member = 0;
+ u32 untag = 0;
+ int ret;
+
+ if (!priv->ops->is_vlan_valid(priv, vlan->vid)) {
+ NL_SET_ERR_MSG_MOD(extack, "VLAN ID not valid");
+ return -EINVAL;
+ }
+
+ /* Enable VLAN in the hardware
+ * FIXME: what's with this 4k business?
+ * Just rtl8366_enable_vlan() seems inconclusive.
+ */
+ ret = rtl8366_enable_vlan4k(priv, true);
+ if (ret) {
+ NL_SET_ERR_MSG_MOD(extack, "Failed to enable VLAN 4K");
+ return ret;
+ }
+
+ dev_dbg(priv->dev, "add VLAN %d on port %d, %s, %s\n",
+ vlan->vid, port, untagged ? "untagged" : "tagged",
+ pvid ? "PVID" : "no PVID");
+
+ member |= BIT(port);
+
+ if (untagged)
+ untag |= BIT(port);
+
+ ret = rtl8366_set_vlan(priv, vlan->vid, member, untag, 0);
+ if (ret) {
+ dev_err(priv->dev, "failed to set up VLAN %04x", vlan->vid);
+ return ret;
+ }
+
+ if (!pvid)
+ return 0;
+
+ ret = rtl8366_set_pvid(priv, port, vlan->vid);
+ if (ret) {
+ dev_err(priv->dev, "failed to set PVID on port %d to VLAN %04x",
+ port, vlan->vid);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
+
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct realtek_priv *priv = ds->priv;
+ int ret, i;
+
+ dev_dbg(priv->dev, "del VLAN %d on port %d\n", vlan->vid, port);
+
+ for (i = 0; i < priv->num_vlan_mc; i++) {
+ struct rtl8366_vlan_mc vlanmc;
+
+ ret = priv->ops->get_vlan_mc(priv, i, &vlanmc);
+ if (ret)
+ return ret;
+
+ if (vlan->vid == vlanmc.vid) {
+ /* Remove this port from the VLAN */
+ vlanmc.member &= ~BIT(port);
+ vlanmc.untag &= ~BIT(port);
+ /*
+ * If no ports are members of this VLAN
+ * anymore then clear the whole member
+ * config so it can be reused.
+ */
+ if (!vlanmc.member) {
+ vlanmc.vid = 0;
+ vlanmc.priority = 0;
+ vlanmc.fid = 0;
+ }
+ ret = priv->ops->set_vlan_mc(priv, i, &vlanmc);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to remove VLAN %04x\n",
+ vlan->vid);
+ return ret;
+ }
+ break;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_del);
+
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8366_mib_counter *mib;
+ int i;
+
+ if (port >= priv->num_ports)
+ return;
+
+ for (i = 0; i < priv->num_mib_counters; i++) {
+ mib = &priv->mib_counters[i];
+ strncpy(data + i * ETH_GSTRING_LEN,
+ mib->name, ETH_GSTRING_LEN);
+ }
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_strings);
+
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ struct realtek_priv *priv = ds->priv;
+
+ /* We only support SS_STATS */
+ if (sset != ETH_SS_STATS)
+ return 0;
+ if (port >= priv->num_ports)
+ return -EINVAL;
+
+ return priv->num_mib_counters;
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_sset_count);
+
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+ struct realtek_priv *priv = ds->priv;
+ int i;
+ int ret;
+
+ if (port >= priv->num_ports)
+ return;
+
+ for (i = 0; i < priv->num_mib_counters; i++) {
+ struct rtl8366_mib_counter *mib;
+ u64 mibvalue = 0;
+
+ mib = &priv->mib_counters[i];
+ ret = priv->ops->get_mib_counter(priv, port, mib, &mibvalue);
+ if (ret) {
+ dev_err(priv->dev, "error reading MIB counter %s\n",
+ mib->name);
+ }
+ data[i] = mibvalue;
+ }
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats);
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
new file mode 100644
index 000000000..25f88022b
--- /dev/null
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -0,0 +1,1873 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch
+ *
+ * This is a sparsely documented chip, the only viable documentation seems
+ * to be a patched up code drop from the vendor that appear in various
+ * GPL source trees.
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+#include "realtek.h"
+
+#define RTL8366RB_PORT_NUM_CPU 5
+#define RTL8366RB_NUM_PORTS 6
+#define RTL8366RB_PHY_NO_MAX 4
+#define RTL8366RB_PHY_ADDR_MAX 31
+
+/* Switch Global Configuration register */
+#define RTL8366RB_SGCR 0x0000
+#define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0)
+#define RTL8366RB_SGCR_MAX_LENGTH(a) ((a) << 4)
+#define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3)
+#define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0)
+#define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1)
+#define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2)
+#define RTL8366RB_SGCR_MAX_LENGTH_16000 RTL8366RB_SGCR_MAX_LENGTH(0x3)
+#define RTL8366RB_SGCR_EN_VLAN BIT(13)
+#define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14)
+
+/* Port Enable Control register */
+#define RTL8366RB_PECR 0x0001
+
+/* Switch per-port learning disablement register */
+#define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002
+
+/* Security control, actually aging register */
+#define RTL8366RB_SECURITY_CTRL 0x0003
+
+#define RTL8366RB_SSCR2 0x0004
+#define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0)
+
+/* Port Mode Control registers */
+#define RTL8366RB_PMC0 0x0005
+#define RTL8366RB_PMC0_SPI BIT(0)
+#define RTL8366RB_PMC0_EN_AUTOLOAD BIT(1)
+#define RTL8366RB_PMC0_PROBE BIT(2)
+#define RTL8366RB_PMC0_DIS_BISR BIT(3)
+#define RTL8366RB_PMC0_ADCTEST BIT(4)
+#define RTL8366RB_PMC0_SRAM_DIAG BIT(5)
+#define RTL8366RB_PMC0_EN_SCAN BIT(6)
+#define RTL8366RB_PMC0_P4_IOMODE_SHIFT 7
+#define RTL8366RB_PMC0_P4_IOMODE_MASK GENMASK(9, 7)
+#define RTL8366RB_PMC0_P5_IOMODE_SHIFT 10
+#define RTL8366RB_PMC0_P5_IOMODE_MASK GENMASK(12, 10)
+#define RTL8366RB_PMC0_SDSMODE_SHIFT 13
+#define RTL8366RB_PMC0_SDSMODE_MASK GENMASK(15, 13)
+#define RTL8366RB_PMC1 0x0006
+
+/* Port Mirror Control Register */
+#define RTL8366RB_PMCR 0x0007
+#define RTL8366RB_PMCR_SOURCE_PORT(a) (a)
+#define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f
+#define RTL8366RB_PMCR_MONITOR_PORT(a) ((a) << 4)
+#define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0
+#define RTL8366RB_PMCR_MIRROR_RX BIT(8)
+#define RTL8366RB_PMCR_MIRROR_TX BIT(9)
+#define RTL8366RB_PMCR_MIRROR_SPC BIT(10)
+#define RTL8366RB_PMCR_MIRROR_ISO BIT(11)
+
+/* bits 0..7 = port 0, bits 8..15 = port 1 */
+#define RTL8366RB_PAACR0 0x0010
+/* bits 0..7 = port 2, bits 8..15 = port 3 */
+#define RTL8366RB_PAACR1 0x0011
+/* bits 0..7 = port 4, bits 8..15 = port 5 */
+#define RTL8366RB_PAACR2 0x0012
+#define RTL8366RB_PAACR_SPEED_10M 0
+#define RTL8366RB_PAACR_SPEED_100M 1
+#define RTL8366RB_PAACR_SPEED_1000M 2
+#define RTL8366RB_PAACR_FULL_DUPLEX BIT(2)
+#define RTL8366RB_PAACR_LINK_UP BIT(4)
+#define RTL8366RB_PAACR_TX_PAUSE BIT(5)
+#define RTL8366RB_PAACR_RX_PAUSE BIT(6)
+#define RTL8366RB_PAACR_AN BIT(7)
+
+#define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \
+ RTL8366RB_PAACR_FULL_DUPLEX | \
+ RTL8366RB_PAACR_LINK_UP | \
+ RTL8366RB_PAACR_TX_PAUSE | \
+ RTL8366RB_PAACR_RX_PAUSE)
+
+/* bits 0..7 = port 0, bits 8..15 = port 1 */
+#define RTL8366RB_PSTAT0 0x0014
+/* bits 0..7 = port 2, bits 8..15 = port 3 */
+#define RTL8366RB_PSTAT1 0x0015
+/* bits 0..7 = port 4, bits 8..15 = port 5 */
+#define RTL8366RB_PSTAT2 0x0016
+
+#define RTL8366RB_POWER_SAVING_REG 0x0021
+
+/* Spanning tree status (STP) control, two bits per port per FID */
+#define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */
+#define RTL8366RB_STP_STATE_DISABLED 0x0
+#define RTL8366RB_STP_STATE_BLOCKING 0x1
+#define RTL8366RB_STP_STATE_LEARNING 0x2
+#define RTL8366RB_STP_STATE_FORWARDING 0x3
+#define RTL8366RB_STP_MASK GENMASK(1, 0)
+#define RTL8366RB_STP_STATE(port, state) \
+ ((state) << ((port) * 2))
+#define RTL8366RB_STP_STATE_MASK(port) \
+ RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK)
+
+/* CPU port control reg */
+#define RTL8368RB_CPU_CTRL_REG 0x0061
+#define RTL8368RB_CPU_PORTS_MSK 0x00FF
+/* Disables inserting custom tag length/type 0x8899 */
+#define RTL8368RB_CPU_NO_TAG BIT(15)
+
+#define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */
+#define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */
+#define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */
+
+#define RTL8366RB_RESET_CTRL_REG 0x0100
+#define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0)
+#define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1)
+
+#define RTL8366RB_CHIP_ID_REG 0x0509
+#define RTL8366RB_CHIP_ID_8366 0x5937
+#define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A
+#define RTL8366RB_CHIP_VERSION_MASK 0xf
+
+/* PHY registers control */
+#define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000
+#define RTL8366RB_PHY_CTRL_READ BIT(0)
+#define RTL8366RB_PHY_CTRL_WRITE 0
+#define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001
+#define RTL8366RB_PHY_INT_BUSY BIT(0)
+#define RTL8366RB_PHY_EXT_BUSY BIT(4)
+#define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002
+#define RTL8366RB_PHY_EXT_CTRL_REG 0x8010
+#define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011
+#define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012
+
+#define RTL8366RB_PHY_REG_MASK 0x1f
+#define RTL8366RB_PHY_PAGE_OFFSET 5
+#define RTL8366RB_PHY_PAGE_MASK (0xf << 5)
+#define RTL8366RB_PHY_NO_OFFSET 9
+#define RTL8366RB_PHY_NO_MASK (0x1f << 9)
+
+/* VLAN Ingress Control Register 1, one bit per port.
+ * bit 0 .. 5 will make the switch drop ingress frames without
+ * VID such as untagged or priority-tagged frames for respective
+ * port.
+ * bit 6 .. 11 will make the switch drop ingress frames carrying
+ * a C-tag with VID != 0 for respective port.
+ */
+#define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E
+#define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6))
+
+/* VLAN Ingress Control Register 2, one bit per port.
+ * bit0 .. bit5 will make the switch drop all ingress frames with
+ * a VLAN classification that does not include the port is in its
+ * member set.
+ */
+#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
+
+/* LED control registers */
+#define RTL8366RB_LED_BLINKRATE_REG 0x0430
+#define RTL8366RB_LED_BLINKRATE_MASK 0x0007
+#define RTL8366RB_LED_BLINKRATE_28MS 0x0000
+#define RTL8366RB_LED_BLINKRATE_56MS 0x0001
+#define RTL8366RB_LED_BLINKRATE_84MS 0x0002
+#define RTL8366RB_LED_BLINKRATE_111MS 0x0003
+#define RTL8366RB_LED_BLINKRATE_222MS 0x0004
+#define RTL8366RB_LED_BLINKRATE_446MS 0x0005
+
+#define RTL8366RB_LED_CTRL_REG 0x0431
+#define RTL8366RB_LED_OFF 0x0
+#define RTL8366RB_LED_DUP_COL 0x1
+#define RTL8366RB_LED_LINK_ACT 0x2
+#define RTL8366RB_LED_SPD1000 0x3
+#define RTL8366RB_LED_SPD100 0x4
+#define RTL8366RB_LED_SPD10 0x5
+#define RTL8366RB_LED_SPD1000_ACT 0x6
+#define RTL8366RB_LED_SPD100_ACT 0x7
+#define RTL8366RB_LED_SPD10_ACT 0x8
+#define RTL8366RB_LED_SPD100_10_ACT 0x9
+#define RTL8366RB_LED_FIBER 0xa
+#define RTL8366RB_LED_AN_FAULT 0xb
+#define RTL8366RB_LED_LINK_RX 0xc
+#define RTL8366RB_LED_LINK_TX 0xd
+#define RTL8366RB_LED_MASTER 0xe
+#define RTL8366RB_LED_FORCE 0xf
+#define RTL8366RB_LED_0_1_CTRL_REG 0x0432
+#define RTL8366RB_LED_1_OFFSET 6
+#define RTL8366RB_LED_2_3_CTRL_REG 0x0433
+#define RTL8366RB_LED_3_OFFSET 6
+
+#define RTL8366RB_MIB_COUNT 33
+#define RTL8366RB_GLOBAL_MIB_COUNT 1
+#define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050
+#define RTL8366RB_MIB_COUNTER_BASE 0x1000
+#define RTL8366RB_MIB_CTRL_REG 0x13F0
+#define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC
+#define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0)
+#define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1)
+#define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p))
+#define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11)
+
+#define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063
+#define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \
+ (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4)
+#define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf
+#define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4))
+
+#define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C
+#define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185
+
+#define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180
+#define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01
+#define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01
+
+#define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3)
+
+#define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014
+#define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003
+#define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004
+#define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010
+#define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020
+#define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040
+#define RTL8366RB_PORT_STATUS_AN_MASK 0x0080
+
+#define RTL8366RB_NUM_VLANS 16
+#define RTL8366RB_NUM_LEDGROUPS 4
+#define RTL8366RB_NUM_VIDS 4096
+#define RTL8366RB_PRIORITYMAX 7
+#define RTL8366RB_NUM_FIDS 8
+#define RTL8366RB_FIDMAX 7
+
+#define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */
+#define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */
+#define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */
+#define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */
+#define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */
+
+#define RTL8366RB_PORT_CPU BIT(5) /* CPU port */
+
+#define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \
+ RTL8366RB_PORT_2 | \
+ RTL8366RB_PORT_3 | \
+ RTL8366RB_PORT_4 | \
+ RTL8366RB_PORT_5 | \
+ RTL8366RB_PORT_CPU)
+
+#define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \
+ RTL8366RB_PORT_2 | \
+ RTL8366RB_PORT_3 | \
+ RTL8366RB_PORT_4 | \
+ RTL8366RB_PORT_5)
+
+#define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \
+ RTL8366RB_PORT_2 | \
+ RTL8366RB_PORT_3 | \
+ RTL8366RB_PORT_4)
+
+#define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU
+
+/* First configuration word per member config, VID and prio */
+#define RTL8366RB_VLAN_VID_MASK 0xfff
+#define RTL8366RB_VLAN_PRIORITY_SHIFT 12
+#define RTL8366RB_VLAN_PRIORITY_MASK 0x7
+/* Second configuration word per member config, member and untagged */
+#define RTL8366RB_VLAN_UNTAG_SHIFT 8
+#define RTL8366RB_VLAN_UNTAG_MASK 0xff
+#define RTL8366RB_VLAN_MEMBER_MASK 0xff
+/* Third config word per member config, STAG currently unused */
+#define RTL8366RB_VLAN_STAG_MBR_MASK 0xff
+#define RTL8366RB_VLAN_STAG_MBR_SHIFT 8
+#define RTL8366RB_VLAN_STAG_IDX_MASK 0x7
+#define RTL8366RB_VLAN_STAG_IDX_SHIFT 5
+#define RTL8366RB_VLAN_FID_MASK 0x7
+
+/* Port ingress bandwidth control */
+#define RTL8366RB_IB_BASE 0x0200
+#define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + (pnum))
+#define RTL8366RB_IB_BDTH_MASK 0x3fff
+#define RTL8366RB_IB_PREIFG BIT(14)
+
+/* Port egress bandwidth control */
+#define RTL8366RB_EB_BASE 0x02d1
+#define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + (pnum))
+#define RTL8366RB_EB_BDTH_MASK 0x3fff
+#define RTL8366RB_EB_PREIFG_REG 0x02f8
+#define RTL8366RB_EB_PREIFG BIT(9)
+
+#define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */
+#define RTL8366RB_BDTH_UNIT 64
+#define RTL8366RB_BDTH_REG_DEFAULT 16383
+
+/* QOS */
+#define RTL8366RB_QOS BIT(15)
+/* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */
+#define RTL8366RB_QOS_DEFAULT_PREIFG 1
+
+/* Interrupt handling */
+#define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440
+#define RTL8366RB_INTERRUPT_POLARITY BIT(0)
+#define RTL8366RB_P4_RGMII_LED BIT(2)
+#define RTL8366RB_INTERRUPT_MASK_REG 0x0441
+#define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0)
+#define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8)
+#define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9)
+#define RTL8366RB_INTERRUPT_P4_FIBER BIT(12)
+#define RTL8366RB_INTERRUPT_P4_UTP BIT(13)
+#define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \
+ RTL8366RB_INTERRUPT_ACLEXCEED | \
+ RTL8366RB_INTERRUPT_STORMEXCEED | \
+ RTL8366RB_INTERRUPT_P4_FIBER | \
+ RTL8366RB_INTERRUPT_P4_UTP)
+#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
+#define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
+
+/* Port isolation registers */
+#define RTL8366RB_PORT_ISO_BASE 0x0F08
+#define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum))
+#define RTL8366RB_PORT_ISO_EN BIT(0)
+#define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1)
+#define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1)
+
+/* bits 0..5 enable force when cleared */
+#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
+
+#define RTL8366RB_OAM_PARSER_REG 0x0F14
+#define RTL8366RB_OAM_MULTIPLEXER_REG 0x0F15
+
+#define RTL8366RB_GREEN_FEATURE_REG 0x0F51
+#define RTL8366RB_GREEN_FEATURE_MSK 0x0007
+#define RTL8366RB_GREEN_FEATURE_TX BIT(0)
+#define RTL8366RB_GREEN_FEATURE_RX BIT(2)
+
+/**
+ * struct rtl8366rb - RTL8366RB-specific data
+ * @max_mtu: per-port max MTU setting
+ * @pvid_enabled: if PVID is set for respective port
+ */
+struct rtl8366rb {
+ unsigned int max_mtu[RTL8366RB_NUM_PORTS];
+ bool pvid_enabled[RTL8366RB_NUM_PORTS];
+};
+
+static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
+ { 0, 0, 4, "IfInOctets" },
+ { 0, 4, 4, "EtherStatsOctets" },
+ { 0, 8, 2, "EtherStatsUnderSizePkts" },
+ { 0, 10, 2, "EtherFragments" },
+ { 0, 12, 2, "EtherStatsPkts64Octets" },
+ { 0, 14, 2, "EtherStatsPkts65to127Octets" },
+ { 0, 16, 2, "EtherStatsPkts128to255Octets" },
+ { 0, 18, 2, "EtherStatsPkts256to511Octets" },
+ { 0, 20, 2, "EtherStatsPkts512to1023Octets" },
+ { 0, 22, 2, "EtherStatsPkts1024to1518Octets" },
+ { 0, 24, 2, "EtherOversizeStats" },
+ { 0, 26, 2, "EtherStatsJabbers" },
+ { 0, 28, 2, "IfInUcastPkts" },
+ { 0, 30, 2, "EtherStatsMulticastPkts" },
+ { 0, 32, 2, "EtherStatsBroadcastPkts" },
+ { 0, 34, 2, "EtherStatsDropEvents" },
+ { 0, 36, 2, "Dot3StatsFCSErrors" },
+ { 0, 38, 2, "Dot3StatsSymbolErrors" },
+ { 0, 40, 2, "Dot3InPauseFrames" },
+ { 0, 42, 2, "Dot3ControlInUnknownOpcodes" },
+ { 0, 44, 4, "IfOutOctets" },
+ { 0, 48, 2, "Dot3StatsSingleCollisionFrames" },
+ { 0, 50, 2, "Dot3StatMultipleCollisionFrames" },
+ { 0, 52, 2, "Dot3sDeferredTransmissions" },
+ { 0, 54, 2, "Dot3StatsLateCollisions" },
+ { 0, 56, 2, "EtherStatsCollisions" },
+ { 0, 58, 2, "Dot3StatsExcessiveCollisions" },
+ { 0, 60, 2, "Dot3OutPauseFrames" },
+ { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" },
+ { 0, 64, 2, "Dot1dTpPortInDiscards" },
+ { 0, 66, 2, "IfOutUcastPkts" },
+ { 0, 68, 2, "IfOutMulticastPkts" },
+ { 0, 70, 2, "IfOutBroadcastPkts" },
+};
+
+static int rtl8366rb_get_mib_counter(struct realtek_priv *priv,
+ int port,
+ struct rtl8366_mib_counter *mib,
+ u64 *mibvalue)
+{
+ u32 addr, val;
+ int ret;
+ int i;
+
+ addr = RTL8366RB_MIB_COUNTER_BASE +
+ RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) +
+ mib->offset;
+
+ /* Writing access counter address first
+ * then ASIC will prepare 64bits counter wait for being retrived
+ */
+ ret = regmap_write(priv->map, addr, 0); /* Write whatever */
+ if (ret)
+ return ret;
+
+ /* Read MIB control register */
+ ret = regmap_read(priv->map, RTL8366RB_MIB_CTRL_REG, &val);
+ if (ret)
+ return -EIO;
+
+ if (val & RTL8366RB_MIB_CTRL_BUSY_MASK)
+ return -EBUSY;
+
+ if (val & RTL8366RB_MIB_CTRL_RESET_MASK)
+ return -EIO;
+
+ /* Read each individual MIB 16 bits at the time */
+ *mibvalue = 0;
+ for (i = mib->length; i > 0; i--) {
+ ret = regmap_read(priv->map, addr + (i - 1), &val);
+ if (ret)
+ return ret;
+ *mibvalue = (*mibvalue << 16) | (val & 0xFFFF);
+ }
+ return 0;
+}
+
+static u32 rtl8366rb_get_irqmask(struct irq_data *d)
+{
+ int line = irqd_to_hwirq(d);
+ u32 val;
+
+ /* For line interrupts we combine link down in bits
+ * 6..11 with link up in bits 0..5 into one interrupt.
+ */
+ if (line < 12)
+ val = BIT(line) | BIT(line + 6);
+ else
+ val = BIT(line);
+ return val;
+}
+
+static void rtl8366rb_mask_irq(struct irq_data *d)
+{
+ struct realtek_priv *priv = irq_data_get_irq_chip_data(d);
+ int ret;
+
+ ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG,
+ rtl8366rb_get_irqmask(d), 0);
+ if (ret)
+ dev_err(priv->dev, "could not mask IRQ\n");
+}
+
+static void rtl8366rb_unmask_irq(struct irq_data *d)
+{
+ struct realtek_priv *priv = irq_data_get_irq_chip_data(d);
+ int ret;
+
+ ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG,
+ rtl8366rb_get_irqmask(d),
+ rtl8366rb_get_irqmask(d));
+ if (ret)
+ dev_err(priv->dev, "could not unmask IRQ\n");
+}
+
+static irqreturn_t rtl8366rb_irq(int irq, void *data)
+{
+ struct realtek_priv *priv = data;
+ u32 stat;
+ int ret;
+
+ /* This clears the IRQ status register */
+ ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG,
+ &stat);
+ if (ret) {
+ dev_err(priv->dev, "can't read interrupt status\n");
+ return IRQ_NONE;
+ }
+ stat &= RTL8366RB_INTERRUPT_VALID;
+ if (!stat)
+ return IRQ_NONE;
+ while (stat) {
+ int line = __ffs(stat);
+ int child_irq;
+
+ stat &= ~BIT(line);
+ /* For line interrupts we combine link down in bits
+ * 6..11 with link up in bits 0..5 into one interrupt.
+ */
+ if (line < 12 && line > 5)
+ line -= 5;
+ child_irq = irq_find_mapping(priv->irqdomain, line);
+ handle_nested_irq(child_irq);
+ }
+ return IRQ_HANDLED;
+}
+
+static struct irq_chip rtl8366rb_irq_chip = {
+ .name = "RTL8366RB",
+ .irq_mask = rtl8366rb_mask_irq,
+ .irq_unmask = rtl8366rb_unmask_irq,
+};
+
+static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, domain->host_data);
+ irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq);
+ irq_set_nested_thread(irq, 1);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_set_nested_thread(irq, 0);
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops rtl8366rb_irqdomain_ops = {
+ .map = rtl8366rb_irq_map,
+ .unmap = rtl8366rb_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv)
+{
+ struct device_node *intc;
+ unsigned long irq_trig;
+ int irq;
+ int ret;
+ u32 val;
+ int i;
+
+ intc = of_get_child_by_name(priv->dev->of_node, "interrupt-controller");
+ if (!intc) {
+ dev_err(priv->dev, "missing child interrupt-controller node\n");
+ return -EINVAL;
+ }
+ /* RB8366RB IRQs cascade off this one */
+ irq = of_irq_get(intc, 0);
+ if (irq <= 0) {
+ dev_err(priv->dev, "failed to get parent IRQ\n");
+ ret = irq ? irq : -EINVAL;
+ goto out_put_node;
+ }
+
+ /* This clears the IRQ status register */
+ ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG,
+ &val);
+ if (ret) {
+ dev_err(priv->dev, "can't read interrupt status\n");
+ goto out_put_node;
+ }
+
+ /* Fetch IRQ edge information from the descriptor */
+ irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+ switch (irq_trig) {
+ case IRQF_TRIGGER_RISING:
+ case IRQF_TRIGGER_HIGH:
+ dev_info(priv->dev, "active high/rising IRQ\n");
+ val = 0;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ case IRQF_TRIGGER_LOW:
+ dev_info(priv->dev, "active low/falling IRQ\n");
+ val = RTL8366RB_INTERRUPT_POLARITY;
+ break;
+ }
+ ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_INTERRUPT_POLARITY,
+ val);
+ if (ret) {
+ dev_err(priv->dev, "could not configure IRQ polarity\n");
+ goto out_put_node;
+ }
+
+ ret = devm_request_threaded_irq(priv->dev, irq, NULL,
+ rtl8366rb_irq, IRQF_ONESHOT,
+ "RTL8366RB", priv);
+ if (ret) {
+ dev_err(priv->dev, "unable to request irq: %d\n", ret);
+ goto out_put_node;
+ }
+ priv->irqdomain = irq_domain_add_linear(intc,
+ RTL8366RB_NUM_INTERRUPT,
+ &rtl8366rb_irqdomain_ops,
+ priv);
+ if (!priv->irqdomain) {
+ dev_err(priv->dev, "failed to create IRQ domain\n");
+ ret = -EINVAL;
+ goto out_put_node;
+ }
+ for (i = 0; i < priv->num_ports; i++)
+ irq_set_parent(irq_create_mapping(priv->irqdomain, i), irq);
+
+out_put_node:
+ of_node_put(intc);
+ return ret;
+}
+
+static int rtl8366rb_set_addr(struct realtek_priv *priv)
+{
+ u8 addr[ETH_ALEN];
+ u16 val;
+ int ret;
+
+ eth_random_addr(addr);
+
+ dev_info(priv->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+ val = addr[0] << 8 | addr[1];
+ ret = regmap_write(priv->map, RTL8366RB_SMAR0, val);
+ if (ret)
+ return ret;
+ val = addr[2] << 8 | addr[3];
+ ret = regmap_write(priv->map, RTL8366RB_SMAR1, val);
+ if (ret)
+ return ret;
+ val = addr[4] << 8 | addr[5];
+ ret = regmap_write(priv->map, RTL8366RB_SMAR2, val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/* Found in a vendor driver */
+
+/* Struct for handling the jam tables' entries */
+struct rtl8366rb_jam_tbl_entry {
+ u16 reg;
+ u16 val;
+};
+
+/* For the "version 0" early silicon, appear in most source releases */
+static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_0[] = {
+ {0x000B, 0x0001}, {0x03A6, 0x0100}, {0x03A7, 0x0001}, {0x02D1, 0x3FFF},
+ {0x02D2, 0x3FFF}, {0x02D3, 0x3FFF}, {0x02D4, 0x3FFF}, {0x02D5, 0x3FFF},
+ {0x02D6, 0x3FFF}, {0x02D7, 0x3FFF}, {0x02D8, 0x3FFF}, {0x022B, 0x0688},
+ {0x022C, 0x0FAC}, {0x03D0, 0x4688}, {0x03D1, 0x01F5}, {0x0000, 0x0830},
+ {0x02F9, 0x0200}, {0x02F7, 0x7FFF}, {0x02F8, 0x03FF}, {0x0080, 0x03E8},
+ {0x0081, 0x00CE}, {0x0082, 0x00DA}, {0x0083, 0x0230}, {0xBE0F, 0x2000},
+ {0x0231, 0x422A}, {0x0232, 0x422A}, {0x0233, 0x422A}, {0x0234, 0x422A},
+ {0x0235, 0x422A}, {0x0236, 0x422A}, {0x0237, 0x422A}, {0x0238, 0x422A},
+ {0x0239, 0x422A}, {0x023A, 0x422A}, {0x023B, 0x422A}, {0x023C, 0x422A},
+ {0x023D, 0x422A}, {0x023E, 0x422A}, {0x023F, 0x422A}, {0x0240, 0x422A},
+ {0x0241, 0x422A}, {0x0242, 0x422A}, {0x0243, 0x422A}, {0x0244, 0x422A},
+ {0x0245, 0x422A}, {0x0246, 0x422A}, {0x0247, 0x422A}, {0x0248, 0x422A},
+ {0x0249, 0x0146}, {0x024A, 0x0146}, {0x024B, 0x0146}, {0xBE03, 0xC961},
+ {0x024D, 0x0146}, {0x024E, 0x0146}, {0x024F, 0x0146}, {0x0250, 0x0146},
+ {0xBE64, 0x0226}, {0x0252, 0x0146}, {0x0253, 0x0146}, {0x024C, 0x0146},
+ {0x0251, 0x0146}, {0x0254, 0x0146}, {0xBE62, 0x3FD0}, {0x0084, 0x0320},
+ {0x0255, 0x0146}, {0x0256, 0x0146}, {0x0257, 0x0146}, {0x0258, 0x0146},
+ {0x0259, 0x0146}, {0x025A, 0x0146}, {0x025B, 0x0146}, {0x025C, 0x0146},
+ {0x025D, 0x0146}, {0x025E, 0x0146}, {0x025F, 0x0146}, {0x0260, 0x0146},
+ {0x0261, 0xA23F}, {0x0262, 0x0294}, {0x0263, 0xA23F}, {0x0264, 0x0294},
+ {0x0265, 0xA23F}, {0x0266, 0x0294}, {0x0267, 0xA23F}, {0x0268, 0x0294},
+ {0x0269, 0xA23F}, {0x026A, 0x0294}, {0x026B, 0xA23F}, {0x026C, 0x0294},
+ {0x026D, 0xA23F}, {0x026E, 0x0294}, {0x026F, 0xA23F}, {0x0270, 0x0294},
+ {0x02F5, 0x0048}, {0xBE09, 0x0E00}, {0xBE1E, 0x0FA0}, {0xBE14, 0x8448},
+ {0xBE15, 0x1007}, {0xBE4A, 0xA284}, {0xC454, 0x3F0B}, {0xC474, 0x3F0B},
+ {0xBE48, 0x3672}, {0xBE4B, 0x17A7}, {0xBE4C, 0x0B15}, {0xBE52, 0x0EDD},
+ {0xBE49, 0x8C00}, {0xBE5B, 0x785C}, {0xBE5C, 0x785C}, {0xBE5D, 0x785C},
+ {0xBE61, 0x368A}, {0xBE63, 0x9B84}, {0xC456, 0xCC13}, {0xC476, 0xCC13},
+ {0xBE65, 0x307D}, {0xBE6D, 0x0005}, {0xBE6E, 0xE120}, {0xBE2E, 0x7BAF},
+};
+
+/* This v1 init sequence is from Belkin F5D8235 U-Boot release */
+static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_1[] = {
+ {0x0000, 0x0830}, {0x0001, 0x8000}, {0x0400, 0x8130}, {0xBE78, 0x3C3C},
+ {0x0431, 0x5432}, {0xBE37, 0x0CE4}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0},
+ {0xC44C, 0x1585}, {0xC44C, 0x1185}, {0xC44C, 0x1585}, {0xC46C, 0x1585},
+ {0xC46C, 0x1185}, {0xC46C, 0x1585}, {0xC451, 0x2135}, {0xC471, 0x2135},
+ {0xBE10, 0x8140}, {0xBE15, 0x0007}, {0xBE6E, 0xE120}, {0xBE69, 0xD20F},
+ {0xBE6B, 0x0320}, {0xBE24, 0xB000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF20},
+ {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800}, {0xBE24, 0x0000},
+ {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60}, {0xBE21, 0x0140},
+ {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000}, {0xBE2E, 0x7B7A},
+ {0xBE36, 0x0CE4}, {0x02F5, 0x0048}, {0xBE77, 0x2940}, {0x000A, 0x83E0},
+ {0xBE79, 0x3C3C}, {0xBE00, 0x1340},
+};
+
+/* This v2 init sequence is from Belkin F5D8235 U-Boot release */
+static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_2[] = {
+ {0x0450, 0x0000}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432},
+ {0xC44F, 0x6250}, {0xC46F, 0x6250}, {0xC456, 0x0C14}, {0xC476, 0x0C14},
+ {0xC44C, 0x1C85}, {0xC44C, 0x1885}, {0xC44C, 0x1C85}, {0xC46C, 0x1C85},
+ {0xC46C, 0x1885}, {0xC46C, 0x1C85}, {0xC44C, 0x0885}, {0xC44C, 0x0881},
+ {0xC44C, 0x0885}, {0xC46C, 0x0885}, {0xC46C, 0x0881}, {0xC46C, 0x0885},
+ {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001},
+ {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6E, 0x0320},
+ {0xBE77, 0x2940}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120},
+ {0x8000, 0x0001}, {0xBE15, 0x1007}, {0x8000, 0x0000}, {0xBE15, 0x1007},
+ {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160}, {0xBE10, 0x8140},
+ {0xBE00, 0x1340}, {0x0F51, 0x0010},
+};
+
+/* Appears in a DDWRT code dump */
+static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_3[] = {
+ {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432},
+ {0x0F51, 0x0017}, {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0},
+ {0xC456, 0x0C14}, {0xC476, 0x0C14}, {0xC454, 0x3F8B}, {0xC474, 0x3F8B},
+ {0xC450, 0x2071}, {0xC470, 0x2071}, {0xC451, 0x226B}, {0xC471, 0x226B},
+ {0xC452, 0xA293}, {0xC472, 0xA293}, {0xC44C, 0x1585}, {0xC44C, 0x1185},
+ {0xC44C, 0x1585}, {0xC46C, 0x1585}, {0xC46C, 0x1185}, {0xC46C, 0x1585},
+ {0xC44C, 0x0185}, {0xC44C, 0x0181}, {0xC44C, 0x0185}, {0xC46C, 0x0185},
+ {0xC46C, 0x0181}, {0xC46C, 0x0185}, {0xBE24, 0xB000}, {0xBE23, 0xFF51},
+ {0xBE22, 0xDF20}, {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800},
+ {0xBE24, 0x0000}, {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60},
+ {0xBE21, 0x0140}, {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000},
+ {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001},
+ {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6B, 0x0320},
+ {0xBE77, 0x2800}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120},
+ {0x8000, 0x0001}, {0xBE10, 0x8140}, {0x8000, 0x0000}, {0xBE10, 0x8140},
+ {0xBE15, 0x1007}, {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160},
+ {0xBE10, 0x8140}, {0xBE00, 0x1340}, {0x0450, 0x0000}, {0x0401, 0x0000},
+};
+
+/* Belkin F5D8235 v1, "belkin,f5d8235-v1" */
+static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_f5d8235[] = {
+ {0x0242, 0x02BF}, {0x0245, 0x02BF}, {0x0248, 0x02BF}, {0x024B, 0x02BF},
+ {0x024E, 0x02BF}, {0x0251, 0x02BF}, {0x0254, 0x0A3F}, {0x0256, 0x0A3F},
+ {0x0258, 0x0A3F}, {0x025A, 0x0A3F}, {0x025C, 0x0A3F}, {0x025E, 0x0A3F},
+ {0x0263, 0x007C}, {0x0100, 0x0004}, {0xBE5B, 0x3500}, {0x800E, 0x200F},
+ {0xBE1D, 0x0F00}, {0x8001, 0x5011}, {0x800A, 0xA2F4}, {0x800B, 0x17A3},
+ {0xBE4B, 0x17A3}, {0xBE41, 0x5011}, {0xBE17, 0x2100}, {0x8000, 0x8304},
+ {0xBE40, 0x8304}, {0xBE4A, 0xA2F4}, {0x800C, 0xA8D5}, {0x8014, 0x5500},
+ {0x8015, 0x0004}, {0xBE4C, 0xA8D5}, {0xBE59, 0x0008}, {0xBE09, 0x0E00},
+ {0xBE36, 0x1036}, {0xBE37, 0x1036}, {0x800D, 0x00FF}, {0xBE4D, 0x00FF},
+};
+
+/* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */
+static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_dgn3500[] = {
+ {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0F51, 0x0017},
+ {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, {0x0450, 0x0000},
+ {0x0401, 0x0000}, {0x0431, 0x0960},
+};
+
+/* This jam table activates "green ethernet", which means low power mode
+ * and is claimed to detect the cable length and not use more power than
+ * necessary, and the ports should enter power saving mode 10 seconds after
+ * a cable is disconnected. Seems to always be the same.
+ */
+static const struct rtl8366rb_jam_tbl_entry rtl8366rb_green_jam[] = {
+ {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7},
+ {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C},
+ {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C},
+};
+
+/* Function that jams the tables in the proper registers */
+static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table,
+ int jam_size, struct realtek_priv *priv,
+ bool write_dbg)
+{
+ u32 val;
+ int ret;
+ int i;
+
+ for (i = 0; i < jam_size; i++) {
+ if ((jam_table[i].reg & 0xBE00) == 0xBE00) {
+ ret = regmap_read(priv->map,
+ RTL8366RB_PHY_ACCESS_BUSY_REG,
+ &val);
+ if (ret)
+ return ret;
+ if (!(val & RTL8366RB_PHY_INT_BUSY)) {
+ ret = regmap_write(priv->map,
+ RTL8366RB_PHY_ACCESS_CTRL_REG,
+ RTL8366RB_PHY_CTRL_WRITE);
+ if (ret)
+ return ret;
+ }
+ }
+ if (write_dbg)
+ dev_dbg(priv->dev, "jam %04x into register %04x\n",
+ jam_table[i].val,
+ jam_table[i].reg);
+ ret = regmap_write(priv->map,
+ jam_table[i].reg,
+ jam_table[i].val);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+static int rtl8366rb_setup(struct dsa_switch *ds)
+{
+ struct realtek_priv *priv = ds->priv;
+ const struct rtl8366rb_jam_tbl_entry *jam_table;
+ struct rtl8366rb *rb;
+ u32 chip_ver = 0;
+ u32 chip_id = 0;
+ int jam_size;
+ u32 val;
+ int ret;
+ int i;
+
+ rb = priv->chip_data;
+
+ ret = regmap_read(priv->map, RTL8366RB_CHIP_ID_REG, &chip_id);
+ if (ret) {
+ dev_err(priv->dev, "unable to read chip id\n");
+ return ret;
+ }
+
+ switch (chip_id) {
+ case RTL8366RB_CHIP_ID_8366:
+ break;
+ default:
+ dev_err(priv->dev, "unknown chip id (%04x)\n", chip_id);
+ return -ENODEV;
+ }
+
+ ret = regmap_read(priv->map, RTL8366RB_CHIP_VERSION_CTRL_REG,
+ &chip_ver);
+ if (ret) {
+ dev_err(priv->dev, "unable to read chip version\n");
+ return ret;
+ }
+
+ dev_info(priv->dev, "RTL%04x ver %u chip found\n",
+ chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK);
+
+ /* Do the init dance using the right jam table */
+ switch (chip_ver) {
+ case 0:
+ jam_table = rtl8366rb_init_jam_ver_0;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0);
+ break;
+ case 1:
+ jam_table = rtl8366rb_init_jam_ver_1;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1);
+ break;
+ case 2:
+ jam_table = rtl8366rb_init_jam_ver_2;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2);
+ break;
+ default:
+ jam_table = rtl8366rb_init_jam_ver_3;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3);
+ break;
+ }
+
+ /* Special jam tables for special routers
+ * TODO: are these necessary? Maintainers, please test
+ * without them, using just the off-the-shelf tables.
+ */
+ if (of_machine_is_compatible("belkin,f5d8235-v1")) {
+ jam_table = rtl8366rb_init_jam_f5d8235;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235);
+ }
+ if (of_machine_is_compatible("netgear,dgn3500") ||
+ of_machine_is_compatible("netgear,dgn3500b")) {
+ jam_table = rtl8366rb_init_jam_dgn3500;
+ jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500);
+ }
+
+ ret = rtl8366rb_jam_table(jam_table, jam_size, priv, true);
+ if (ret)
+ return ret;
+
+ /* Isolate all user ports so they can only send packets to itself and the CPU port */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) |
+ RTL8366RB_PORT_ISO_EN);
+ if (ret)
+ return ret;
+ }
+ /* CPU port can send packets to all ports */
+ ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
+ RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) |
+ RTL8366RB_PORT_ISO_EN);
+ if (ret)
+ return ret;
+
+ /* Set up the "green ethernet" feature */
+ ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
+ ARRAY_SIZE(rtl8366rb_green_jam), priv, false);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->map,
+ RTL8366RB_GREEN_FEATURE_REG,
+ (chip_ver == 1) ? 0x0007 : 0x0003);
+ if (ret)
+ return ret;
+
+ /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */
+ ret = regmap_write(priv->map, 0x0c, 0x240);
+ if (ret)
+ return ret;
+ ret = regmap_write(priv->map, 0x0d, 0x240);
+ if (ret)
+ return ret;
+
+ /* Set some random MAC address */
+ ret = rtl8366rb_set_addr(priv);
+ if (ret)
+ return ret;
+
+ /* Enable CPU port with custom DSA tag 8899.
+ *
+ * If you set RTL8368RB_CPU_NO_TAG (bit 15) in this registers
+ * the custom tag is turned off.
+ */
+ ret = regmap_update_bits(priv->map, RTL8368RB_CPU_CTRL_REG,
+ 0xFFFF,
+ BIT(priv->cpu_port));
+ if (ret)
+ return ret;
+
+ /* Make sure we default-enable the fixed CPU port */
+ ret = regmap_update_bits(priv->map, RTL8366RB_PECR,
+ BIT(priv->cpu_port),
+ 0);
+ if (ret)
+ return ret;
+
+ /* Set maximum packet length to 1536 bytes */
+ ret = regmap_update_bits(priv->map, RTL8366RB_SGCR,
+ RTL8366RB_SGCR_MAX_LENGTH_MASK,
+ RTL8366RB_SGCR_MAX_LENGTH_1536);
+ if (ret)
+ return ret;
+ for (i = 0; i < RTL8366RB_NUM_PORTS; i++)
+ /* layer 2 size, see rtl8366rb_change_mtu() */
+ rb->max_mtu[i] = 1532;
+
+ /* Disable learning for all ports */
+ ret = regmap_write(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL,
+ RTL8366RB_PORT_ALL);
+ if (ret)
+ return ret;
+
+ /* Enable auto ageing for all ports */
+ ret = regmap_write(priv->map, RTL8366RB_SECURITY_CTRL, 0);
+ if (ret)
+ return ret;
+
+ /* Port 4 setup: this enables Port 4, usually the WAN port,
+ * common PHY IO mode is apparently mode 0, and this is not what
+ * the port is initialized to. There is no explanation of the
+ * IO modes in the Realtek source code, if your WAN port is
+ * connected to something exotic such as fiber, then this might
+ * be worth experimenting with.
+ */
+ ret = regmap_update_bits(priv->map, RTL8366RB_PMC0,
+ RTL8366RB_PMC0_P4_IOMODE_MASK,
+ 0 << RTL8366RB_PMC0_P4_IOMODE_SHIFT);
+ if (ret)
+ return ret;
+
+ /* Accept all packets by default, we enable filtering on-demand */
+ ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+ 0);
+ if (ret)
+ return ret;
+ ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+ 0);
+ if (ret)
+ return ret;
+
+ /* Don't drop packets whose DA has not been learned */
+ ret = regmap_update_bits(priv->map, RTL8366RB_SSCR2,
+ RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0);
+ if (ret)
+ return ret;
+
+ /* Set blinking, TODO: make this configurable */
+ ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG,
+ RTL8366RB_LED_BLINKRATE_MASK,
+ RTL8366RB_LED_BLINKRATE_56MS);
+ if (ret)
+ return ret;
+
+ /* Set up LED activity:
+ * Each port has 4 LEDs, we configure all ports to the same
+ * behaviour (no individual config) but we can set up each
+ * LED separately.
+ */
+ if (priv->leds_disabled) {
+ /* Turn everything off */
+ regmap_update_bits(priv->map,
+ RTL8366RB_LED_0_1_CTRL_REG,
+ 0x0FFF, 0);
+ regmap_update_bits(priv->map,
+ RTL8366RB_LED_2_3_CTRL_REG,
+ 0x0FFF, 0);
+ regmap_update_bits(priv->map,
+ RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_P4_RGMII_LED,
+ 0);
+ val = RTL8366RB_LED_OFF;
+ } else {
+ /* TODO: make this configurable per LED */
+ val = RTL8366RB_LED_FORCE;
+ }
+ for (i = 0; i < 4; i++) {
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_CTRL_REG,
+ 0xf << (i * 4),
+ val << (i * 4));
+ if (ret)
+ return ret;
+ }
+
+ ret = rtl8366_reset_vlan(priv);
+ if (ret)
+ return ret;
+
+ ret = rtl8366rb_setup_cascaded_irq(priv);
+ if (ret)
+ dev_info(priv->dev, "no interrupt support\n");
+
+ if (priv->setup_interface) {
+ ret = priv->setup_interface(ds);
+ if (ret) {
+ dev_err(priv->dev, "could not set up MDIO bus\n");
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds,
+ int port,
+ enum dsa_tag_protocol mp)
+{
+ /* This switch uses the 4 byte protocol A Realtek DSA tag */
+ return DSA_TAG_PROTO_RTL4_A;
+}
+
+static void
+rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface, struct phy_device *phydev,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
+{
+ struct realtek_priv *priv = ds->priv;
+ int ret;
+
+ if (port != priv->cpu_port)
+ return;
+
+ dev_dbg(priv->dev, "MAC link up on CPU port (%d)\n", port);
+
+ /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */
+ ret = regmap_update_bits(priv->map, RTL8366RB_MAC_FORCE_CTRL_REG,
+ BIT(port), BIT(port));
+ if (ret) {
+ dev_err(priv->dev, "failed to force 1Gbit on CPU port\n");
+ return;
+ }
+
+ ret = regmap_update_bits(priv->map, RTL8366RB_PAACR2,
+ 0xFF00U,
+ RTL8366RB_PAACR_CPU_PORT << 8);
+ if (ret) {
+ dev_err(priv->dev, "failed to set PAACR on CPU port\n");
+ return;
+ }
+
+ /* Enable the CPU port */
+ ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
+ 0);
+ if (ret) {
+ dev_err(priv->dev, "failed to enable the CPU port\n");
+ return;
+ }
+}
+
+static void
+rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct realtek_priv *priv = ds->priv;
+ int ret;
+
+ if (port != priv->cpu_port)
+ return;
+
+ dev_dbg(priv->dev, "MAC link down on CPU port (%d)\n", port);
+
+ /* Disable the CPU port */
+ ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
+ BIT(port));
+ if (ret) {
+ dev_err(priv->dev, "failed to disable the CPU port\n");
+ return;
+ }
+}
+
+static void rb8366rb_set_port_led(struct realtek_priv *priv,
+ int port, bool enable)
+{
+ u16 val = enable ? 0x3f : 0;
+ int ret;
+
+ if (priv->leds_disabled)
+ return;
+
+ switch (port) {
+ case 0:
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_0_1_CTRL_REG,
+ 0x3F, val);
+ break;
+ case 1:
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_0_1_CTRL_REG,
+ 0x3F << RTL8366RB_LED_1_OFFSET,
+ val << RTL8366RB_LED_1_OFFSET);
+ break;
+ case 2:
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_2_3_CTRL_REG,
+ 0x3F, val);
+ break;
+ case 3:
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_2_3_CTRL_REG,
+ 0x3F << RTL8366RB_LED_3_OFFSET,
+ val << RTL8366RB_LED_3_OFFSET);
+ break;
+ case 4:
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_P4_RGMII_LED,
+ enable ? RTL8366RB_P4_RGMII_LED : 0);
+ break;
+ default:
+ dev_err(priv->dev, "no LED for port %d\n", port);
+ return;
+ }
+ if (ret)
+ dev_err(priv->dev, "error updating LED on port %d\n", port);
+}
+
+static int
+rtl8366rb_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct realtek_priv *priv = ds->priv;
+ int ret;
+
+ dev_dbg(priv->dev, "enable port %d\n", port);
+ ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
+ 0);
+ if (ret)
+ return ret;
+
+ rb8366rb_set_port_led(priv, port, true);
+ return 0;
+}
+
+static void
+rtl8366rb_port_disable(struct dsa_switch *ds, int port)
+{
+ struct realtek_priv *priv = ds->priv;
+ int ret;
+
+ dev_dbg(priv->dev, "disable port %d\n", port);
+ ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
+ BIT(port));
+ if (ret)
+ return;
+
+ rb8366rb_set_port_led(priv, port, false);
+}
+
+static int
+rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge,
+ bool *tx_fwd_offload,
+ struct netlink_ext_ack *extack)
+{
+ struct realtek_priv *priv = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ /* Loop over all other ports than the current one */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ /* Current port handled last */
+ if (i == port)
+ continue;
+ /* Not on this bridge */
+ if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+ continue;
+ /* Join this port to each other port on the bridge */
+ ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_PORTS(BIT(port)),
+ RTL8366RB_PORT_ISO_PORTS(BIT(port)));
+ if (ret)
+ dev_err(priv->dev, "failed to join port %d\n", port);
+
+ port_bitmap |= BIT(i);
+ }
+
+ /* Set the bits for the ports we can access */
+ return regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port),
+ RTL8366RB_PORT_ISO_PORTS(port_bitmap),
+ RTL8366RB_PORT_ISO_PORTS(port_bitmap));
+}
+
+static void
+rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge)
+{
+ struct realtek_priv *priv = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ /* Loop over all other ports than this one */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ /* Current port handled last */
+ if (i == port)
+ continue;
+ /* Not on this bridge */
+ if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+ continue;
+ /* Remove this port from any other port on the bridge */
+ ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0);
+ if (ret)
+ dev_err(priv->dev, "failed to leave port %d\n", port);
+
+ port_bitmap |= BIT(i);
+ }
+
+ /* Clear the bits for the ports we can not access, leave ourselves */
+ regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port),
+ RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
+}
+
+/**
+ * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames
+ * @priv: SMI state container
+ * @port: the port to drop untagged and C-tagged frames on
+ * @drop: whether to drop or pass untagged and C-tagged frames
+ *
+ * Return: zero for success, a negative number on error.
+ */
+static int rtl8366rb_drop_untagged(struct realtek_priv *priv, int port, bool drop)
+{
+ return regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+ RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port),
+ drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0);
+}
+
+static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8366rb *rb;
+ int ret;
+
+ rb = priv->chip_data;
+
+ dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port,
+ vlan_filtering ? "enable" : "disable");
+
+ /* If the port is not in the member set, the frame will be dropped */
+ ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+ BIT(port), vlan_filtering ? BIT(port) : 0);
+ if (ret)
+ return ret;
+
+ /* If VLAN filtering is enabled and PVID is also enabled, we must
+ * not drop any untagged or C-tagged frames. If we turn off VLAN
+ * filtering on a port, we need to accept any frames.
+ */
+ if (vlan_filtering)
+ ret = rtl8366rb_drop_untagged(priv, port, !rb->pvid_enabled[port]);
+ else
+ ret = rtl8366rb_drop_untagged(priv, port, false);
+
+ return ret;
+}
+
+static int
+rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack)
+{
+ /* We support enabling/disabling learning */
+ if (flags.mask & ~(BR_LEARNING))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int
+rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack)
+{
+ struct realtek_priv *priv = ds->priv;
+ int ret;
+
+ if (flags.mask & BR_LEARNING) {
+ ret = regmap_update_bits(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL,
+ BIT(port),
+ (flags.val & BR_LEARNING) ? 0 : BIT(port));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void
+rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct realtek_priv *priv = ds->priv;
+ u32 val;
+ int i;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ val = RTL8366RB_STP_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ case BR_STATE_LISTENING:
+ val = RTL8366RB_STP_STATE_BLOCKING;
+ break;
+ case BR_STATE_LEARNING:
+ val = RTL8366RB_STP_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ val = RTL8366RB_STP_STATE_FORWARDING;
+ break;
+ default:
+ dev_err(priv->dev, "unknown bridge state requested\n");
+ return;
+ }
+
+ /* Set the same status for the port on all the FIDs */
+ for (i = 0; i < RTL8366RB_NUM_FIDS; i++) {
+ regmap_update_bits(priv->map, RTL8366RB_STP_STATE_BASE + i,
+ RTL8366RB_STP_STATE_MASK(port),
+ RTL8366RB_STP_STATE(port, val));
+ }
+}
+
+static void
+rtl8366rb_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct realtek_priv *priv = ds->priv;
+
+ /* This will age out any learned L2 entries */
+ regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL,
+ BIT(port), BIT(port));
+ /* Restore the normal state of things */
+ regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL,
+ BIT(port), 0);
+}
+
+static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct realtek_priv *priv = ds->priv;
+ struct rtl8366rb *rb;
+ unsigned int max_mtu;
+ u32 len;
+ int i;
+
+ /* Cache the per-port MTU setting */
+ rb = priv->chip_data;
+ rb->max_mtu[port] = new_mtu;
+
+ /* Roof out the MTU for the entire switch to the greatest
+ * common denominator: the biggest set for any one port will
+ * be the biggest MTU for the switch.
+ *
+ * The first setting, 1522 bytes, is max IP packet 1500 bytes,
+ * plus ethernet header, 1518 bytes, plus CPU tag, 4 bytes.
+ * This function should consider the parameter an SDU, so the
+ * MTU passed for this setting is 1518 bytes. The same logic
+ * of subtracting the DSA tag of 4 bytes apply to the other
+ * settings.
+ */
+ max_mtu = 1518;
+ for (i = 0; i < RTL8366RB_NUM_PORTS; i++) {
+ if (rb->max_mtu[i] > max_mtu)
+ max_mtu = rb->max_mtu[i];
+ }
+ if (max_mtu <= 1518)
+ len = RTL8366RB_SGCR_MAX_LENGTH_1522;
+ else if (max_mtu > 1518 && max_mtu <= 1532)
+ len = RTL8366RB_SGCR_MAX_LENGTH_1536;
+ else if (max_mtu > 1532 && max_mtu <= 1548)
+ len = RTL8366RB_SGCR_MAX_LENGTH_1552;
+ else
+ len = RTL8366RB_SGCR_MAX_LENGTH_16000;
+
+ return regmap_update_bits(priv->map, RTL8366RB_SGCR,
+ RTL8366RB_SGCR_MAX_LENGTH_MASK,
+ len);
+}
+
+static int rtl8366rb_max_mtu(struct dsa_switch *ds, int port)
+{
+ /* The max MTU is 16000 bytes, so we subtract the CPU tag
+ * and the max presented to the system is 15996 bytes.
+ */
+ return 15996;
+}
+
+static int rtl8366rb_get_vlan_4k(struct realtek_priv *priv, u32 vid,
+ struct rtl8366_vlan_4k *vlan4k)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k));
+
+ if (vid >= RTL8366RB_NUM_VIDS)
+ return -EINVAL;
+
+ /* write VID */
+ ret = regmap_write(priv->map, RTL8366RB_VLAN_TABLE_WRITE_BASE,
+ vid & RTL8366RB_VLAN_VID_MASK);
+ if (ret)
+ return ret;
+
+ /* write table access control word */
+ ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
+ RTL8366RB_TABLE_VLAN_READ_CTRL);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_read(priv->map,
+ RTL8366RB_VLAN_TABLE_READ_BASE + i,
+ &data[i]);
+ if (ret)
+ return ret;
+ }
+
+ vlan4k->vid = vid;
+ vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
+ RTL8366RB_VLAN_UNTAG_MASK;
+ vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
+ vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
+
+ return 0;
+}
+
+static int rtl8366rb_set_vlan_4k(struct realtek_priv *priv,
+ const struct rtl8366_vlan_4k *vlan4k)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ if (vlan4k->vid >= RTL8366RB_NUM_VIDS ||
+ vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK ||
+ vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK ||
+ vlan4k->fid > RTL8366RB_FIDMAX)
+ return -EINVAL;
+
+ data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK;
+ data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) |
+ ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
+ RTL8366RB_VLAN_UNTAG_SHIFT);
+ data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_write(priv->map,
+ RTL8366RB_VLAN_TABLE_WRITE_BASE + i,
+ data[i]);
+ if (ret)
+ return ret;
+ }
+
+ /* write table access control word */
+ ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG,
+ RTL8366RB_TABLE_VLAN_WRITE_CTRL);
+
+ return ret;
+}
+
+static int rtl8366rb_get_vlan_mc(struct realtek_priv *priv, u32 index,
+ struct rtl8366_vlan_mc *vlanmc)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc));
+
+ if (index >= RTL8366RB_NUM_VLANS)
+ return -EINVAL;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_read(priv->map,
+ RTL8366RB_VLAN_MC_BASE(index) + i,
+ &data[i]);
+ if (ret)
+ return ret;
+ }
+
+ vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK;
+ vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) &
+ RTL8366RB_VLAN_PRIORITY_MASK;
+ vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) &
+ RTL8366RB_VLAN_UNTAG_MASK;
+ vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK;
+ vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK;
+
+ return 0;
+}
+
+static int rtl8366rb_set_vlan_mc(struct realtek_priv *priv, u32 index,
+ const struct rtl8366_vlan_mc *vlanmc)
+{
+ u32 data[3];
+ int ret;
+ int i;
+
+ if (index >= RTL8366RB_NUM_VLANS ||
+ vlanmc->vid >= RTL8366RB_NUM_VIDS ||
+ vlanmc->priority > RTL8366RB_PRIORITYMAX ||
+ vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK ||
+ vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK ||
+ vlanmc->fid > RTL8366RB_FIDMAX)
+ return -EINVAL;
+
+ data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) |
+ ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) <<
+ RTL8366RB_VLAN_PRIORITY_SHIFT);
+ data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) |
+ ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) <<
+ RTL8366RB_VLAN_UNTAG_SHIFT);
+ data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK;
+
+ for (i = 0; i < 3; i++) {
+ ret = regmap_write(priv->map,
+ RTL8366RB_VLAN_MC_BASE(index) + i,
+ data[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val)
+{
+ u32 data;
+ int ret;
+
+ if (port >= priv->num_ports)
+ return -EINVAL;
+
+ ret = regmap_read(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+ &data);
+ if (ret)
+ return ret;
+
+ *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) &
+ RTL8366RB_PORT_VLAN_CTRL_MASK;
+
+ return 0;
+}
+
+static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index)
+{
+ struct rtl8366rb *rb;
+ bool pvid_enabled;
+ int ret;
+
+ rb = priv->chip_data;
+ pvid_enabled = !!index;
+
+ if (port >= priv->num_ports || index >= RTL8366RB_NUM_VLANS)
+ return -EINVAL;
+
+ ret = regmap_update_bits(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+ RTL8366RB_PORT_VLAN_CTRL_MASK <<
+ RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
+ (index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
+ RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
+ if (ret)
+ return ret;
+
+ rb->pvid_enabled[port] = pvid_enabled;
+
+ /* If VLAN filtering is enabled and PVID is also enabled, we must
+ * not drop any untagged or C-tagged frames. Make sure to update the
+ * filtering setting.
+ */
+ if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port)))
+ ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled);
+
+ return ret;
+}
+
+static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan)
+{
+ unsigned int max = RTL8366RB_NUM_VLANS - 1;
+
+ if (priv->vlan4k_enabled)
+ max = RTL8366RB_NUM_VIDS - 1;
+
+ if (vlan > max)
+ return false;
+
+ return true;
+}
+
+static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable)
+{
+ dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable");
+ return regmap_update_bits(priv->map,
+ RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN,
+ enable ? RTL8366RB_SGCR_EN_VLAN : 0);
+}
+
+static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable)
+{
+ dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable");
+ return regmap_update_bits(priv->map, RTL8366RB_SGCR,
+ RTL8366RB_SGCR_EN_VLAN_4KTB,
+ enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0);
+}
+
+static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum)
+{
+ u32 val;
+ u32 reg;
+ int ret;
+
+ if (phy > RTL8366RB_PHY_NO_MAX)
+ return -EINVAL;
+
+ mutex_lock(&priv->map_lock);
+
+ ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
+ RTL8366RB_PHY_CTRL_READ);
+ if (ret)
+ goto out;
+
+ reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
+
+ ret = regmap_write(priv->map_nolock, reg, 0);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to write PHY%d reg %04x @ %04x, ret %d\n",
+ phy, regnum, reg, ret);
+ goto out;
+ }
+
+ ret = regmap_read(priv->map_nolock, RTL8366RB_PHY_ACCESS_DATA_REG,
+ &val);
+ if (ret)
+ goto out;
+
+ ret = val;
+
+ dev_dbg(priv->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n",
+ phy, regnum, reg, val);
+
+out:
+ mutex_unlock(&priv->map_lock);
+
+ return ret;
+}
+
+static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum,
+ u16 val)
+{
+ u32 reg;
+ int ret;
+
+ if (phy > RTL8366RB_PHY_NO_MAX)
+ return -EINVAL;
+
+ mutex_lock(&priv->map_lock);
+
+ ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG,
+ RTL8366RB_PHY_CTRL_WRITE);
+ if (ret)
+ goto out;
+
+ reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum;
+
+ dev_dbg(priv->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n",
+ phy, regnum, reg, val);
+
+ ret = regmap_write(priv->map_nolock, reg, val);
+ if (ret)
+ goto out;
+
+out:
+ mutex_unlock(&priv->map_lock);
+
+ return ret;
+}
+
+static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ return rtl8366rb_phy_read(ds->priv, phy, regnum);
+}
+
+static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum,
+ u16 val)
+{
+ return rtl8366rb_phy_write(ds->priv, phy, regnum, val);
+}
+
+static int rtl8366rb_reset_chip(struct realtek_priv *priv)
+{
+ int timeout = 10;
+ u32 val;
+ int ret;
+
+ priv->write_reg_noack(priv, RTL8366RB_RESET_CTRL_REG,
+ RTL8366RB_CHIP_CTRL_RESET_HW);
+ do {
+ usleep_range(20000, 25000);
+ ret = regmap_read(priv->map, RTL8366RB_RESET_CTRL_REG, &val);
+ if (ret)
+ return ret;
+
+ if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW))
+ break;
+ } while (--timeout);
+
+ if (!timeout) {
+ dev_err(priv->dev, "timeout waiting for the switch to reset\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rtl8366rb_detect(struct realtek_priv *priv)
+{
+ struct device *dev = priv->dev;
+ int ret;
+ u32 val;
+
+ /* Detect device */
+ ret = regmap_read(priv->map, 0x5c, &val);
+ if (ret) {
+ dev_err(dev, "can't get chip ID (%d)\n", ret);
+ return ret;
+ }
+
+ switch (val) {
+ case 0x6027:
+ dev_info(dev, "found an RTL8366S switch\n");
+ dev_err(dev, "this switch is not yet supported, submit patches!\n");
+ return -ENODEV;
+ case 0x5937:
+ dev_info(dev, "found an RTL8366RB switch\n");
+ priv->cpu_port = RTL8366RB_PORT_NUM_CPU;
+ priv->num_ports = RTL8366RB_NUM_PORTS;
+ priv->num_vlan_mc = RTL8366RB_NUM_VLANS;
+ priv->mib_counters = rtl8366rb_mib_counters;
+ priv->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters);
+ break;
+ default:
+ dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n",
+ val);
+ break;
+ }
+
+ ret = rtl8366rb_reset_chip(priv);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = {
+ .get_tag_protocol = rtl8366_get_tag_protocol,
+ .setup = rtl8366rb_setup,
+ .phylink_mac_link_up = rtl8366rb_mac_link_up,
+ .phylink_mac_link_down = rtl8366rb_mac_link_down,
+ .get_strings = rtl8366_get_strings,
+ .get_ethtool_stats = rtl8366_get_ethtool_stats,
+ .get_sset_count = rtl8366_get_sset_count,
+ .port_bridge_join = rtl8366rb_port_bridge_join,
+ .port_bridge_leave = rtl8366rb_port_bridge_leave,
+ .port_vlan_filtering = rtl8366rb_vlan_filtering,
+ .port_vlan_add = rtl8366_vlan_add,
+ .port_vlan_del = rtl8366_vlan_del,
+ .port_enable = rtl8366rb_port_enable,
+ .port_disable = rtl8366rb_port_disable,
+ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
+ .port_bridge_flags = rtl8366rb_port_bridge_flags,
+ .port_stp_state_set = rtl8366rb_port_stp_state_set,
+ .port_fast_age = rtl8366rb_port_fast_age,
+ .port_change_mtu = rtl8366rb_change_mtu,
+ .port_max_mtu = rtl8366rb_max_mtu,
+};
+
+static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = {
+ .get_tag_protocol = rtl8366_get_tag_protocol,
+ .setup = rtl8366rb_setup,
+ .phy_read = rtl8366rb_dsa_phy_read,
+ .phy_write = rtl8366rb_dsa_phy_write,
+ .phylink_mac_link_up = rtl8366rb_mac_link_up,
+ .phylink_mac_link_down = rtl8366rb_mac_link_down,
+ .get_strings = rtl8366_get_strings,
+ .get_ethtool_stats = rtl8366_get_ethtool_stats,
+ .get_sset_count = rtl8366_get_sset_count,
+ .port_bridge_join = rtl8366rb_port_bridge_join,
+ .port_bridge_leave = rtl8366rb_port_bridge_leave,
+ .port_vlan_filtering = rtl8366rb_vlan_filtering,
+ .port_vlan_add = rtl8366_vlan_add,
+ .port_vlan_del = rtl8366_vlan_del,
+ .port_enable = rtl8366rb_port_enable,
+ .port_disable = rtl8366rb_port_disable,
+ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
+ .port_bridge_flags = rtl8366rb_port_bridge_flags,
+ .port_stp_state_set = rtl8366rb_port_stp_state_set,
+ .port_fast_age = rtl8366rb_port_fast_age,
+ .port_change_mtu = rtl8366rb_change_mtu,
+ .port_max_mtu = rtl8366rb_max_mtu,
+};
+
+static const struct realtek_ops rtl8366rb_ops = {
+ .detect = rtl8366rb_detect,
+ .get_vlan_mc = rtl8366rb_get_vlan_mc,
+ .set_vlan_mc = rtl8366rb_set_vlan_mc,
+ .get_vlan_4k = rtl8366rb_get_vlan_4k,
+ .set_vlan_4k = rtl8366rb_set_vlan_4k,
+ .get_mc_index = rtl8366rb_get_mc_index,
+ .set_mc_index = rtl8366rb_set_mc_index,
+ .get_mib_counter = rtl8366rb_get_mib_counter,
+ .is_vlan_valid = rtl8366rb_is_vlan_valid,
+ .enable_vlan = rtl8366rb_enable_vlan,
+ .enable_vlan4k = rtl8366rb_enable_vlan4k,
+ .phy_read = rtl8366rb_phy_read,
+ .phy_write = rtl8366rb_phy_write,
+};
+
+const struct realtek_variant rtl8366rb_variant = {
+ .ds_ops_smi = &rtl8366rb_switch_ops_smi,
+ .ds_ops_mdio = &rtl8366rb_switch_ops_mdio,
+ .ops = &rtl8366rb_ops,
+ .clk_delay = 10,
+ .cmd_read = 0xa9,
+ .cmd_write = 0xa8,
+ .chip_data_sz = sizeof(struct rtl8366rb),
+};
+EXPORT_SYMBOL_GPL(rtl8366rb_variant);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch");
+MODULE_LICENSE("GPL");