diff options
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 287 | ||||
| -rw-r--r-- | drivers/net/dsa/mt7530.h | 11 |
2 files changed, 249 insertions, 49 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 07065c1af..1aba0cf38 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -419,6 +419,20 @@ static void mt7530_pll_setup(struct mt7530_priv *priv) core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); } +/* If port 6 is available as a CPU port, always prefer that as the default, + * otherwise don't care. + */ +static struct dsa_port * +mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds) +{ + struct dsa_port *cpu_dp = dsa_to_port(ds, 6); + + if (dsa_port_is_cpu(cpu_dp)) + return cpu_dp; + + return NULL; +} + /* Setup port 6 interface mode and TRGMII TX circuit */ static int mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) @@ -998,20 +1012,173 @@ unlock_exit: mutex_unlock(&priv->reg_mutex); } -/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std - * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA - * must only be propagated to C-VLAN and MAC Bridge components. That means - * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports, - * these frames are supposed to be processed by the CPU (software). So we make - * the switch only forward them to the CPU port. And if received from a CPU - * port, forward to a single port. The software is responsible of making the - * switch conform to the latter by setting a single port as destination port on - * the special tag. +/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) + * of the Open Systems Interconnection basic reference model (OSI/RM) are + * described; the medium access control (MAC) and logical link control (LLC) + * sublayers. The MAC sublayer is the one facing the physical layer. + * + * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A + * Bridge component comprises a MAC Relay Entity for interconnecting the Ports + * of the Bridge, at least two Ports, and higher layer entities with at least a + * Spanning Tree Protocol Entity included. + * + * Each Bridge Port also functions as an end station and shall provide the MAC + * Service to an LLC Entity. Each instance of the MAC Service is provided to a + * distinct LLC Entity that supports protocol identification, multiplexing, and + * demultiplexing, for protocol data unit (PDU) transmission and reception by + * one or more higher layer entities. + * + * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC + * Entity associated with each Bridge Port is modeled as being directly + * connected to the attached Local Area Network (LAN). + * + * On the switch with CPU port architecture, CPU port functions as Management + * Port, and the Management Port functionality is provided by software which + * functions as an end station. Software is connected to an IEEE 802 LAN that is + * wholly contained within the system that incorporates the Bridge. Software + * provides access to the LLC Entity associated with each Bridge Port by the + * value of the source port field on the special tag on the frame received by + * software. + * + * We call frames that carry control information to determine the active + * topology and current extent of each Virtual Local Area Network (VLAN), i.e., + * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration + * Protocol Data Units (MVRPDUs), and frames from other link constrained + * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and + * Link Layer Discovery Protocol (LLDP), link-local frames. They are not + * forwarded by a Bridge. Permanently configured entries in the filtering + * database (FDB) ensure that such frames are discarded by the Forwarding + * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: + * + * Each of the reserved MAC addresses specified in Table 8-1 + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be + * permanently configured in the FDB in C-VLAN components and ERs. + * + * Each of the reserved MAC addresses specified in Table 8-2 + * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently + * configured in the FDB in S-VLAN components. + * + * Each of the reserved MAC addresses specified in Table 8-3 + * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in + * TPMR components. + * + * The FDB entries for reserved MAC addresses shall specify filtering for all + * Bridge Ports and all VIDs. Management shall not provide the capability to + * modify or remove entries for reserved MAC addresses. + * + * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of + * propagation of PDUs within a Bridged Network, as follows: + * + * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no + * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) + * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. + * PDUs transmitted using this destination address, or any other addresses + * that appear in Table 8-1, Table 8-2, and Table 8-3 + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can + * therefore travel no further than those stations that can be reached via a + * single individual LAN from the originating station. + * + * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an + * address that no conformant S-VLAN component, C-VLAN component, or MAC + * Bridge can forward; however, this address is relayed by a TPMR component. + * PDUs using this destination address, or any of the other addresses that + * appear in both Table 8-1 and Table 8-2 but not in Table 8-3 + * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by + * any TPMRs but will propagate no further than the nearest S-VLAN component, + * C-VLAN component, or MAC Bridge. + * + * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address + * that no conformant C-VLAN component, MAC Bridge can forward; however, it is + * relayed by TPMR components and S-VLAN components. PDUs using this + * destination address, or any of the other addresses that appear in Table 8-1 + * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), + * will be relayed by TPMR components and S-VLAN components but will propagate + * no further than the nearest C-VLAN component or MAC Bridge. + * + * Because the LLC Entity associated with each Bridge Port is provided via CPU + * port, we must not filter these frames but forward them to CPU port. + * + * In a Bridge, the transmission Port is majorly decided by ingress and egress + * rules, FDB, and spanning tree Port State functions of the Forwarding Process. + * For link-local frames, only CPU port should be designated as destination port + * in the FDB, and the other functions of the Forwarding Process must not + * interfere with the decision of the transmission Port. We call this process + * trapping frames to CPU port. + * + * Therefore, on the switch with CPU port architecture, link-local frames must + * be trapped to CPU port, and certain link-local frames received by a Port of a + * Bridge comprising a TPMR component or an S-VLAN component must be excluded + * from it. + * + * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port + * MAC Relay (TPMR) component as a TPMR component supports only a subset of the + * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port + * doesn't count) of this architecture will either function as a standard MAC + * Bridge or a standard VLAN Bridge. + * + * Therefore, a Bridge of this architecture can only comprise S-VLAN components, + * C-VLAN components, or MAC Bridge components. Since there's no TPMR component, + * we don't need to relay PDUs using the destination addresses specified on the + * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge + * section where they must be relayed by TPMR components. + * + * One option to trap link-local frames to CPU port is to add static FDB entries + * with CPU port designated as destination port. However, because that + * Independent VLAN Learning (IVL) is being used on every VID, each entry only + * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC + * Bridge component or a C-VLAN component, there would have to be 16 times 4096 + * entries. This switch intellectual property can only hold a maximum of 2048 + * entries. Using this option, there also isn't a mechanism to prevent + * link-local frames from being discarded when the spanning tree Port State of + * the reception Port is discarding. + * + * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 + * registers. Whilst this applies to every VID, it doesn't contain all of the + * reserved MAC addresses without affecting the remaining Standard Group MAC + * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the + * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination + * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF + * destination addresses which may be relayed by MAC Bridges or VLAN Bridges. + * The latter option provides better but not complete conformance. * - * This switch intellectual property cannot conform to this part of the standard - * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC - * DAs, it also includes :22-FF which the scope of propagation is not supposed - * to be restricted for these MAC DAs. + * This switch intellectual property also does not provide a mechanism to trap + * link-local frames with specific destination addresses to CPU port by Bridge, + * to conform to the filtering rules for the distinct Bridge components. + * + * Therefore, regardless of the type of the Bridge component, link-local frames + * with these destination addresses will be trapped to CPU port: + * + * 01-80-C2-00-00-[00,01,02,03,0E] + * + * In a Bridge comprising a MAC Bridge component or a C-VLAN component: + * + * Link-local frames with these destination addresses won't be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] + * + * In a Bridge comprising an S-VLAN component: + * + * Link-local frames with these destination addresses will be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-00 + * + * Link-local frames with these destination addresses won't be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-[04,05,06,07,08,09,0A] + * + * To trap link-local frames to CPU port as conformant as this switch + * intellectual property can allow, link-local frames are made to be regarded as + * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual + * property only lets the frames regarded as BPDUs bypass the spanning tree Port + * State function of the Forwarding Process. + * + * The only remaining interference is the ingress rules. When the reception Port + * has no PVID assigned on software, VLAN-untagged frames won't be allowed in. + * There doesn't seem to be a mechanism on the switch intellectual property to + * have link-local frames bypass this function of the Forwarding Process. */ static void mt753x_trap_frames(struct mt7530_priv *priv) @@ -1019,35 +1186,43 @@ mt753x_trap_frames(struct mt7530_priv *priv) /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them * VLAN-untagged. */ - mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK | - MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK | - MT753X_BPDU_PORT_FW_MASK, - MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) | - MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_BPDU_CPU_ONLY); + mt7530_rmw(priv, MT753X_BPC, + MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK | + MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK | + MT753X_BPDU_PORT_FW_MASK, + MT753X_PAE_BPDU_FR | + MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) | + MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_BPDU_CPU_ONLY); /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress * them VLAN-untagged. */ - mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK | - MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK | - MT753X_R01_PORT_FW_MASK, - MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) | - MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_BPDU_CPU_ONLY); + mt7530_rmw(priv, MT753X_RGAC1, + MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK | + MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR | + MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK, + MT753X_R02_BPDU_FR | + MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) | + MT753X_R01_BPDU_FR | + MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_BPDU_CPU_ONLY); /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress * them VLAN-untagged. */ - mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK | - MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK | - MT753X_R03_PORT_FW_MASK, - MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) | - MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_BPDU_CPU_ONLY); + mt7530_rmw(priv, MT753X_RGAC2, + MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK | + MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR | + MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK, + MT753X_R0E_BPDU_FR | + MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) | + MT753X_R03_BPDU_FR | + MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_BPDU_CPU_ONLY); } static int @@ -1075,6 +1250,13 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) if (priv->id == ID_MT7530 || priv->id == ID_MT7621) mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); + /* Add the CPU port to the CPU port bitmap for MT7531. Trapped frames + * will be forwarded to the CPU port that is affine to the inbound user + * port. + */ + if (priv->id == ID_MT7531) + mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port))); + /* CPU port gets connected to all user ports of * the switch. */ @@ -2252,8 +2434,6 @@ mt7530_setup(struct dsa_switch *ds) SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); - mt7530_pll_setup(priv); - /* Lower Tx driving for TRGMII path */ for (i = 0; i < NUM_TRGMII_CTRL; i++) mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), @@ -2271,6 +2451,9 @@ mt7530_setup(struct dsa_switch *ds) priv->p6_interface = PHY_INTERFACE_MODE_NA; + if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ) + mt7530_pll_setup(priv); + mt753x_trap_frames(priv); /* Enable and reset MIB counters */ @@ -2300,6 +2483,9 @@ mt7530_setup(struct dsa_switch *ds) PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } + /* Allow mirroring frames received on the local port (monitor port). */ + mt7530_set(priv, MT753X_AGC, LOCAL_EN); + /* Setup VLAN ID 0 for VLAN-unaware bridges */ ret = mt7530_setup_vlan0(priv); if (ret) @@ -2370,16 +2556,8 @@ static int mt7531_setup_common(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; - struct dsa_port *cpu_dp; int ret, i; - /* BPDU to CPU port */ - dsa_switch_for_each_cpu_port(cpu_dp, ds) { - mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, - BIT(cpu_dp->index)); - break; - } - mt753x_trap_frames(priv); /* Enable and reset MIB counters */ @@ -2416,6 +2594,9 @@ mt7531_setup_common(struct dsa_switch *ds) PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } + /* Allow mirroring frames received on the local port (monitor port). */ + mt7530_set(priv, MT753X_AGC, LOCAL_EN); + /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) @@ -2494,18 +2675,25 @@ mt7531_setup(struct dsa_switch *ds) priv->p5_interface = PHY_INTERFACE_MODE_NA; priv->p6_interface = PHY_INTERFACE_MODE_NA; - /* Enable PHY core PLL, since phy_device has not yet been created - * provided for phy_[read,write]_mmd_indirect is called, we provide - * our own mt7531_ind_mmd_phy_[read,write] to complete this - * function. + /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since + * phy_device has not yet been created provided for + * phy_[read,write]_mmd_indirect is called, we provide our own + * mt7531_ind_mmd_phy_[read,write] to complete this function. */ val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, CORE_PLL_GROUP4); - val |= MT7531_PHY_PLL_BYPASS_MODE; + val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE; val &= ~MT7531_PHY_PLL_OFF; mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, CORE_PLL_GROUP4, val); + /* Disable EEE advertisement on the switch PHYs. */ + for (i = MT753X_CTRL_PHY_ADDR; + i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) { + mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV, + 0); + } + mt7531_setup_common(ds); /* Setup VLAN ID 0 for VLAN-unaware bridges */ @@ -3239,6 +3427,7 @@ static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, + .preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port, .get_strings = mt7530_get_strings, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index fa2afa67c..6441e8d7f 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -31,6 +31,10 @@ enum mt753x_id { #define SYSC_REG_RSTCTRL 0x34 #define RESET_MCM BIT(2) +/* Register for ARL global control */ +#define MT753X_AGC 0xc +#define LOCAL_EN BIT(7) + /* Registers to mac forward control for unknown frames */ #define MT7530_MFC 0x10 #define BC_FFP(x) (((x) & 0xff) << 24) @@ -53,6 +57,7 @@ enum mt753x_id { #define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK) #define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) #define MT7531_CPU_PMAP_MASK GENMASK(7, 0) +#define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x) #define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \ MT7531_CFC : MT7530_MFC) @@ -63,6 +68,7 @@ enum mt753x_id { /* Registers for BPDU and PAE frame control*/ #define MT753X_BPC 0x24 +#define MT753X_PAE_BPDU_FR BIT(25) #define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22) #define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x) #define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16) @@ -73,20 +79,24 @@ enum mt753x_id { /* Register for :01 and :02 MAC DA frame control */ #define MT753X_RGAC1 0x28 +#define MT753X_R02_BPDU_FR BIT(25) #define MT753X_R02_EG_TAG_MASK GENMASK(24, 22) #define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x) #define MT753X_R02_PORT_FW_MASK GENMASK(18, 16) #define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x) +#define MT753X_R01_BPDU_FR BIT(9) #define MT753X_R01_EG_TAG_MASK GENMASK(8, 6) #define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x) #define MT753X_R01_PORT_FW_MASK GENMASK(2, 0) /* Register for :03 and :0E MAC DA frame control */ #define MT753X_RGAC2 0x2c +#define MT753X_R0E_BPDU_FR BIT(25) #define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22) #define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x) #define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16) #define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x) +#define MT753X_R03_BPDU_FR BIT(9) #define MT753X_R03_EG_TAG_MASK GENMASK(8, 6) #define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x) #define MT753X_R03_PORT_FW_MASK GENMASK(2, 0) @@ -663,6 +673,7 @@ enum mt7531_clk_skew { #define RG_SYSPLL_DDSFBK_EN BIT(12) #define RG_SYSPLL_BIAS_EN BIT(11) #define RG_SYSPLL_BIAS_LPF_EN BIT(10) +#define MT7531_RG_SYSPLL_DMY2 BIT(6) #define MT7531_PHY_PLL_OFF BIT(5) #define MT7531_PHY_PLL_BYPASS_MODE BIT(4) |