diff options
Diffstat (limited to 'drivers/net/phy/Kconfig')
| -rw-r--r-- | drivers/net/phy/Kconfig | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig new file mode 100644 index 000000000..c57a0262f --- /dev/null +++ b/drivers/net/phy/Kconfig @@ -0,0 +1,374 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# PHY Layer Configuration +# + +config PHYLINK + tristate + depends on NETDEVICES + select PHYLIB + select SWPHY + help + PHYlink models the link between the PHY and MAC, allowing fixed + configuration links, PHYs, and Serdes links with MAC level + autonegotiation modes. + +menuconfig PHYLIB + tristate "PHY Device support and infrastructure" + depends on NETDEVICES + select MDIO_DEVICE + select MDIO_DEVRES + help + Ethernet controllers are usually attached to PHY + devices. This option provides infrastructure for + managing PHY devices. + +if PHYLIB + +config SWPHY + bool + +config LED_TRIGGER_PHY + bool "Support LED triggers for tracking link state" + depends on LEDS_TRIGGERS + help + Adds support for a set of LED trigger events per-PHY. Link + state change will trigger the events, for consumption by an + LED class driver. There are triggers for each link speed currently + supported by the PHY and also a one common "link" trigger as a + logical-or of all the link speed ones. + All these triggers are named according to the following pattern: + <mii bus id>:<phy>:<speed> + + Where speed is in the form: + <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link + for any speed known to the PHY. + + +config FIXED_PHY + tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB + select SWPHY + help + Adds the platform "fixed" MDIO Bus to cover the boards that use + PHYs that are not connected to the real MDIO bus. + + Currently tested with mpc866ads and mpc8349e-mitx. + +config SFP + tristate "SFP cage support" + depends on I2C && PHYLINK + depends on HWMON || HWMON=n + select MDIO_I2C + +comment "MII PHY device drivers" + +config AMD_PHY + tristate "AMD PHYs" + help + Currently supports the am79c874 + +config MESON_GXL_PHY + tristate "Amlogic Meson GXL Internal PHY" + depends on ARCH_MESON || COMPILE_TEST + help + Currently has a driver for the Amlogic Meson GXL Internal PHY + +config ADIN_PHY + tristate "Analog Devices Industrial Ethernet PHYs" + help + Adds support for the Analog Devices Industrial Ethernet PHYs. + Currently supports the: + - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY + - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit + Ethernet PHY + +config ADIN1100_PHY + tristate "Analog Devices Industrial Ethernet T1L PHYs" + help + Adds support for the Analog Devices Industrial T1L Ethernet PHYs. + Currently supports the: + - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY + +config AQUANTIA_PHY + tristate "Aquantia PHYs" + help + Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 + +config AX88796B_PHY + tristate "Asix PHYs" + help + Currently supports the Asix Electronics PHY found in the X-Surf 100 + AX88796B package. + +config BROADCOM_PHY + tristate "Broadcom 54XX PHYs" + select BCM_NET_PHYLIB + select BCM_NET_PHYPTP if NETWORK_PHY_TIMESTAMPING + depends on PTP_1588_CLOCK_OPTIONAL + help + Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, + BCM5481, BCM54810 and BCM5482 PHYs. + +config BCM54140_PHY + tristate "Broadcom BCM54140 PHY" + depends on PHYLIB + depends on HWMON || HWMON=n + select BCM_NET_PHYLIB + help + Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. + + This driver also supports the hardware monitoring of this PHY and + exposes voltage and temperature sensors. + +config BCM63XX_PHY + tristate "Broadcom 63xx SOCs internal PHY" + depends on BCM63XX || COMPILE_TEST + select BCM_NET_PHYLIB + help + Currently supports the 6348 and 6358 PHYs. + +config BCM7XXX_PHY + tristate "Broadcom 7xxx SOCs internal PHYs" + select BCM_NET_PHYLIB + help + Currently supports the BCM7366, BCM7439, BCM7445, and + 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. + +config BCM84881_PHY + tristate "Broadcom BCM84881 PHY" + depends on PHYLIB + help + Support the Broadcom BCM84881 PHY. + +config BCM87XX_PHY + tristate "Broadcom BCM8706 and BCM8727 PHYs" + help + Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. + +config BCM_CYGNUS_PHY + tristate "Broadcom Cygnus/Omega SoC internal PHY" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on MDIO_BCM_IPROC + select BCM_NET_PHYLIB + help + This PHY driver is for the 1G internal PHYs of the Broadcom + Cygnus and Omega Family SoC. + + Currently supports internal PHY's used in the BCM11300, + BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, + BCM58303 & BCM58305 Broadcom Cygnus SoCs. + +config BCM_NET_PHYLIB + tristate + +config BCM_NET_PHYPTP + tristate + +config CICADA_PHY + tristate "Cicada PHYs" + help + Currently supports the cis8204 + +config CORTINA_PHY + tristate "Cortina EDC CDR 10G Ethernet PHY" + help + Currently supports the CS4340 phy. + +config DAVICOM_PHY + tristate "Davicom PHYs" + help + Currently supports dm9161e and dm9131 + +config ICPLUS_PHY + tristate "ICPlus PHYs" + help + Currently supports the IP175C and IP1001 PHYs. + +config LXT_PHY + tristate "Intel LXT PHYs" + help + Currently supports the lxt970, lxt971 + +config INTEL_XWAY_PHY + tristate "Intel XWAY PHYs" + help + Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs. + These PHYs are marked as standalone chips under the names + PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel + SoCs xRX200, xRX300, xRX330, xRX350 and xRX550. + +config LSI_ET1011C_PHY + tristate "LSI ET1011C PHY" + help + Supports the LSI ET1011C PHY. + +config MARVELL_PHY + tristate "Marvell Alaska PHYs" + help + Currently has a driver for the 88E1XXX + +config MARVELL_10G_PHY + tristate "Marvell Alaska 10Gbit PHYs" + help + Support for the Marvell Alaska MV88X3310 and compatible PHYs. + +config MARVELL_88X2222_PHY + tristate "Marvell 88X2222 PHY" + help + Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet + Transceiver. + +config MAXLINEAR_GPHY + tristate "Maxlinear Ethernet PHYs" + select POLYNOMIAL if HWMON + depends on HWMON || HWMON=n + help + Support for the Maxlinear GPY115, GPY211, GPY212, GPY215, + GPY241, GPY245 PHYs. + +config MEDIATEK_GE_PHY + tristate "MediaTek Gigabit Ethernet PHYs" + help + Supports the MediaTek Gigabit Ethernet PHYs. + +config MICREL_PHY + tristate "Micrel PHYs" + depends on PTP_1588_CLOCK_OPTIONAL + help + Supports the KSZ9021, VSC8201, KS8001 PHYs. + +config MICROCHIP_PHY + tristate "Microchip PHYs" + help + Supports the LAN88XX PHYs. + +config MICROCHIP_T1_PHY + tristate "Microchip T1 PHYs" + help + Supports the LAN87XX PHYs. + +config MICROSEMI_PHY + tristate "Microsemi PHYs" + depends on MACSEC || MACSEC=n + depends on PTP_1588_CLOCK_OPTIONAL || !NETWORK_PHY_TIMESTAMPING + select CRYPTO_LIB_AES if MACSEC + help + Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs + +config MOTORCOMM_PHY + tristate "Motorcomm PHYs" + help + Enables support for Motorcomm network PHYs. + Currently supports the YT8511 gigabit PHY. + +config NATIONAL_PHY + tristate "National Semiconductor PHYs" + help + Currently supports the DP83865 PHY. + +config NXP_C45_TJA11XX_PHY + tristate "NXP C45 TJA11XX PHYs" + depends on PTP_1588_CLOCK_OPTIONAL + help + Enable support for NXP C45 TJA11XX PHYs. + Currently supports only the TJA1103 PHY. + +config NXP_TJA11XX_PHY + tristate "NXP TJA11xx PHYs support" + depends on HWMON + help + Currently supports the NXP TJA1100 and TJA1101 PHY. + +config AT803X_PHY + tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs" + depends on REGULATOR + help + Currently supports the AR8030, AR8031, AR8033, AR8035 and internal + QCA8337(Internal qca8k PHY) model + +config QSEMI_PHY + tristate "Quality Semiconductor PHYs" + help + Currently supports the qs6612 + +config REALTEK_PHY + tristate "Realtek PHYs" + help + Supports the Realtek 821x PHY. + +config RENESAS_PHY + tristate "Renesas PHYs" + help + Supports the Renesas PHYs uPD60620 and uPD60620A. + +config ROCKCHIP_PHY + tristate "Rockchip Ethernet PHYs" + help + Currently supports the integrated Ethernet PHY. + +config SMSC_PHY + tristate "SMSC PHYs" + help + Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs + +config STE10XP + tristate "STMicroelectronics STe10Xp PHYs" + help + This is the driver for the STe100p and STe101p PHYs. + +config TERANETICS_PHY + tristate "Teranetics PHYs" + help + Currently supports the Teranetics TN2020 + +config DP83822_PHY + tristate "Texas Instruments DP83822/825/826 PHYs" + help + Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S, + DP83826C and DP83826NC PHYs. + +config DP83TC811_PHY + tristate "Texas Instruments DP83TC811 PHY" + help + Supports the DP83TC811 PHY. + +config DP83848_PHY + tristate "Texas Instruments DP83848 PHY" + help + Supports the DP83848 PHY. + +config DP83867_PHY + tristate "Texas Instruments DP83867 Gigabit PHY" + help + Currently supports the DP83867 PHY. + +config DP83869_PHY + tristate "Texas Instruments DP83869 Gigabit PHY" + help + Currently supports the DP83869 PHY. This PHY supports copper and + fiber connections. + +config DP83TD510_PHY + tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY" + help + Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports + a 10M single pair Ethernet connection for up to 1000 meter cable. + +config VITESSE_PHY + tristate "Vitesse PHYs" + help + Currently supports the vsc8244 + +config XILINX_GMII2RGMII + tristate "Xilinx GMII2RGMII converter driver" + help + This driver support xilinx GMII to RGMII IP core it provides + the Reduced Gigabit Media Independent Interface(RGMII) between + Ethernet physical media devices and the Gigabit Ethernet controller. + +endif # PHYLIB + +config MICREL_KS8995MA + tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" + depends on SPI |