diff options
Diffstat (limited to 'drivers/net/phy/bcm7xxx.c')
| -rw-r--r-- | drivers/net/phy/bcm7xxx.c | 975 |
1 files changed, 975 insertions, 0 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c new file mode 100644 index 000000000..dc5b27cb4 --- /dev/null +++ b/drivers/net/phy/bcm7xxx.c @@ -0,0 +1,975 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Broadcom BCM7xxx internal transceivers support. + * + * Copyright (C) 2014-2017 Broadcom + */ + +#include <linux/module.h> +#include <linux/phy.h> +#include <linux/delay.h> +#include "bcm-phy-lib.h" +#include <linux/bitops.h> +#include <linux/brcmphy.h> +#include <linux/clk.h> +#include <linux/mdio.h> + +/* Broadcom BCM7xxx internal PHY registers */ + +/* EPHY only register definitions */ +#define MII_BCM7XXX_100TX_AUX_CTL 0x10 +#define MII_BCM7XXX_100TX_FALSE_CAR 0x13 +#define MII_BCM7XXX_100TX_DISC 0x14 +#define MII_BCM7XXX_AUX_MODE 0x1d +#define MII_BCM7XXX_64CLK_MDIO BIT(12) +#define MII_BCM7XXX_TEST 0x1f +#define MII_BCM7XXX_SHD_MODE_2 BIT(2) +#define MII_BCM7XXX_SHD_2_ADDR_CTRL 0xe +#define MII_BCM7XXX_SHD_2_CTRL_STAT 0xf +#define MII_BCM7XXX_SHD_2_BIAS_TRIM 0x1a +#define MII_BCM7XXX_SHD_3_PCS_CTRL 0x0 +#define MII_BCM7XXX_SHD_3_PCS_STATUS 0x1 +#define MII_BCM7XXX_SHD_3_EEE_CAP 0x2 +#define MII_BCM7XXX_SHD_3_AN_EEE_ADV 0x3 +#define MII_BCM7XXX_SHD_3_EEE_LP 0x4 +#define MII_BCM7XXX_SHD_3_EEE_WK_ERR 0x5 +#define MII_BCM7XXX_SHD_3_PCS_CTRL_2 0x6 +#define MII_BCM7XXX_PCS_CTRL_2_DEF 0x4400 +#define MII_BCM7XXX_SHD_3_AN_STAT 0xb +#define MII_BCM7XXX_AN_NULL_MSG_EN BIT(0) +#define MII_BCM7XXX_AN_EEE_EN BIT(1) +#define MII_BCM7XXX_SHD_3_EEE_THRESH 0xe +#define MII_BCM7XXX_EEE_THRESH_DEF 0x50 +#define MII_BCM7XXX_SHD_3_TL4 0x23 +#define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1)) + +struct bcm7xxx_phy_priv { + u64 *stats; + struct clk *clk; +}; + +static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) +{ + /* AFE_RXCONFIG_0 */ + bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); + + /* AFE_RXCONFIG_1 */ + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + + /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */ + bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); + + /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */ + bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + + /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); + + /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + + /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */ + bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); + + /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal + * offset for HT=0 code + */ + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + + /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); + + /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); + + /* Reset R_CAL/RC_CAL engine */ + bcm_phy_r_rc_cal_reset(phydev); + + return 0; +} + +static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) +{ + /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */ + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + + /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); + + /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + + /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal + * offset for HT=0 code + */ + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + + /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); + + /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); + + /* Reset R_CAL/RC_CAL engine */ + bcm_phy_r_rc_cal_reset(phydev); + + return 0; +} + +static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev) +{ + /* +1 RC_CAL codes for RL centering for both LT and HT conditions */ + bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003); + + /* Cut master bias current by 2% to compensate for RC_CAL offset */ + bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b); + + /* Improve hybrid leakage */ + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3); + + /* Change rx_on_tune 8 to 0xf */ + bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6); + + /* Change 100Tx EEE bandwidth */ + bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d); + + /* Enable ffe zero detection for Vitesse interoperability */ + bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015); + + bcm_phy_r_rc_cal_reset(phydev); + + return 0; +} + +static int bcm7xxx_28nm_config_init(struct phy_device *phydev) +{ + u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); + u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags); + u8 count; + int ret = 0; + + /* Newer devices have moved the revision information back into a + * standard location in MII_PHYS_ID[23] + */ + if (rev == 0) + rev = phydev->phy_id & ~phydev->drv->phy_id_mask; + + pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n", + phydev_name(phydev), phydev->drv->name, rev, patch); + + /* Dummy read to a register to workaround an issue upon reset where the + * internal inverter may not allow the first MDIO transaction to pass + * the MDIO management controller and make us return 0xffff for such + * reads. + */ + phy_read(phydev, MII_BMSR); + + switch (rev) { + case 0xa0: + case 0xb0: + ret = bcm_phy_28nm_a0b0_afe_config_init(phydev); + break; + case 0xd0: + ret = bcm7xxx_28nm_d0_afe_config_init(phydev); + break; + case 0xe0: + case 0xf0: + /* Rev G0 introduces a roll over */ + case 0x10: + ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev); + break; + case 0x01: + ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev); + break; + default: + break; + } + + if (ret) + return ret; + + ret = bcm_phy_enable_jumbo(phydev); + if (ret) + return ret; + + ret = bcm_phy_downshift_get(phydev, &count); + if (ret) + return ret; + + /* Only enable EEE if Wirespeed/downshift is disabled */ + ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE); + if (ret) + return ret; + + return bcm_phy_enable_apd(phydev, true); +} + +static int bcm7xxx_28nm_resume(struct phy_device *phydev) +{ + int ret; + + /* Re-apply workarounds coming out suspend/resume */ + ret = bcm7xxx_28nm_config_init(phydev); + if (ret) + return ret; + + /* 28nm Gigabit PHYs come out of reset without any half-duplex + * or "hub" compliant advertised mode, fix that. This does not + * cause any problems with the PHY library since genphy_config_aneg() + * gracefully handles auto-negotiated and forced modes. + */ + return genphy_config_aneg(phydev); +} + +static int __phy_set_clr_bits(struct phy_device *dev, int location, + int set_mask, int clr_mask) +{ + int v, ret; + + v = __phy_read(dev, location); + if (v < 0) + return v; + + v &= ~clr_mask; + v |= set_mask; + + ret = __phy_write(dev, location, v); + if (ret < 0) + return ret; + + return v; +} + +static int phy_set_clr_bits(struct phy_device *dev, int location, + int set_mask, int clr_mask) +{ + int ret; + + mutex_lock(&dev->mdio.bus->mdio_lock); + ret = __phy_set_clr_bits(dev, location, set_mask, clr_mask); + mutex_unlock(&dev->mdio.bus->mdio_lock); + + return ret; +} + +static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev) +{ + int ret; + + /* set shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Set current trim values INT_trim = -1, Ext_trim =0 */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_BIAS_TRIM, 0x3BE0); + if (ret < 0) + goto reset_shadow_mode; + + /* Cal reset */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_TL4); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MII_BCM7XXX_TL4_RST_MSK, 0); + if (ret < 0) + goto reset_shadow_mode; + + /* Cal reset disable */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_TL4); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + 0, MII_BCM7XXX_TL4_RST_MSK); + if (ret < 0) + goto reset_shadow_mode; + +reset_shadow_mode: + /* reset shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + + return 0; +} + +/* The 28nm EPHY does not support Clause 45 (MMD) used by bcm-phy-lib */ +static int bcm7xxx_28nm_ephy_apd_enable(struct phy_device *phydev) +{ + int ret; + + /* set shadow mode 1 */ + ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, + MII_BRCM_FET_BT_SRE, 0); + if (ret < 0) + return ret; + + /* Enable auto-power down */ + ret = phy_set_clr_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2, + MII_BRCM_FET_SHDW_AS2_APDE, 0); + if (ret < 0) + return ret; + + /* reset shadow mode 1 */ + ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0, + MII_BRCM_FET_BT_SRE); + if (ret < 0) + return ret; + + return 0; +} + +static int bcm7xxx_28nm_ephy_eee_enable(struct phy_device *phydev) +{ + int ret; + + /* set shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Advertise supported modes */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_AN_EEE_ADV); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MDIO_EEE_100TX); + if (ret < 0) + goto reset_shadow_mode; + + /* Restore Defaults */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_PCS_CTRL_2); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MII_BCM7XXX_PCS_CTRL_2_DEF); + if (ret < 0) + goto reset_shadow_mode; + + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_EEE_THRESH); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + MII_BCM7XXX_EEE_THRESH_DEF); + if (ret < 0) + goto reset_shadow_mode; + + /* Enable EEE autonegotiation */ + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, + MII_BCM7XXX_SHD_3_AN_STAT); + if (ret < 0) + goto reset_shadow_mode; + ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, + (MII_BCM7XXX_AN_NULL_MSG_EN | MII_BCM7XXX_AN_EEE_EN)); + if (ret < 0) + goto reset_shadow_mode; + +reset_shadow_mode: + /* reset shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + + /* Restart autoneg */ + phy_write(phydev, MII_BMCR, + (BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART)); + + return 0; +} + +static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev) +{ + u8 rev = phydev->phy_id & ~phydev->drv->phy_id_mask; + int ret = 0; + + pr_info_once("%s: %s PHY revision: 0x%02x\n", + phydev_name(phydev), phydev->drv->name, rev); + + /* Dummy read to a register to workaround a possible issue upon reset + * where the internal inverter may not allow the first MDIO transaction + * to pass the MDIO management controller and make us return 0xffff for + * such reads. + */ + phy_read(phydev, MII_BMSR); + + /* Apply AFE software work-around if necessary */ + if (rev == 0x01) { + ret = bcm7xxx_28nm_ephy_01_afe_config_init(phydev); + if (ret) + return ret; + } + + ret = bcm7xxx_28nm_ephy_eee_enable(phydev); + if (ret) + return ret; + + return bcm7xxx_28nm_ephy_apd_enable(phydev); +} + +static int bcm7xxx_16nm_ephy_afe_config(struct phy_device *phydev) +{ + int tmp, rcalcode, rcalnewcodelp, rcalnewcode11, rcalnewcode11d2; + + /* Reset PHY */ + tmp = genphy_soft_reset(phydev); + if (tmp) + return tmp; + + /* Reset AFE and PLL */ + bcm_phy_write_exp_sel(phydev, 0x0003, 0x0006); + /* Clear reset */ + bcm_phy_write_exp_sel(phydev, 0x0003, 0x0000); + + /* Write PLL/AFE control register to select 54MHz crystal */ + bcm_phy_write_misc(phydev, 0x0030, 0x0001, 0x0000); + bcm_phy_write_misc(phydev, 0x0031, 0x0000, 0x044a); + + /* Change Ka,Kp,Ki to pdiv=1 */ + bcm_phy_write_misc(phydev, 0x0033, 0x0002, 0x71a1); + /* Configuration override */ + bcm_phy_write_misc(phydev, 0x0033, 0x0001, 0x8000); + + /* Change PLL_NDIV and PLL_NUDGE */ + bcm_phy_write_misc(phydev, 0x0031, 0x0001, 0x2f68); + bcm_phy_write_misc(phydev, 0x0031, 0x0002, 0x0000); + + /* Reference frequency is 54Mhz, config_mode[15:14] = 3 (low + * phase) + */ + bcm_phy_write_misc(phydev, 0x0030, 0x0003, 0xc036); + + /* Initialize bypass mode */ + bcm_phy_write_misc(phydev, 0x0032, 0x0003, 0x0000); + /* Bypass code, default: VCOCLK enabled */ + bcm_phy_write_misc(phydev, 0x0033, 0x0000, 0x0002); + /* LDOs at default setting */ + bcm_phy_write_misc(phydev, 0x0030, 0x0002, 0x01c0); + /* Release PLL reset */ + bcm_phy_write_misc(phydev, 0x0030, 0x0001, 0x0001); + + /* Bandgap curvature correction to correct default */ + bcm_phy_write_misc(phydev, 0x0038, 0x0000, 0x0010); + + /* Run RCAL */ + bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x0038); + bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x003b); + udelay(2); + bcm_phy_write_misc(phydev, 0x0039, 0x0003, 0x003f); + mdelay(5); + + /* AFE_CAL_CONFIG_0, Vref=1000, Target=10, averaging enabled */ + bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x1c82); + /* AFE_CAL_CONFIG_0, no reset and analog powerup */ + bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9e82); + udelay(2); + /* AFE_CAL_CONFIG_0, start calibration */ + bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9f82); + udelay(100); + /* AFE_CAL_CONFIG_0, clear start calibration, set HiBW */ + bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9e86); + udelay(2); + /* AFE_CAL_CONFIG_0, start calibration with hi BW mode set */ + bcm_phy_write_misc(phydev, 0x0039, 0x0001, 0x9f86); + udelay(100); + + /* Adjust 10BT amplitude additional +7% and 100BT +2% */ + bcm_phy_write_misc(phydev, 0x0038, 0x0001, 0xe7ea); + /* Adjust 1G mode amplitude and 1G testmode1 */ + bcm_phy_write_misc(phydev, 0x0038, 0x0002, 0xede0); + + /* Read CORE_EXPA9 */ + tmp = bcm_phy_read_exp_sel(phydev, 0x00a9); + /* CORE_EXPA9[6:1] is rcalcode[5:0] */ + rcalcode = (tmp & 0x7e) / 2; + /* Correct RCAL code + 1 is -1% rprogr, LP: +16 */ + rcalnewcodelp = rcalcode + 16; + /* Correct RCAL code + 1 is -15 rprogr, 11: +10 */ + rcalnewcode11 = rcalcode + 10; + /* Saturate if necessary */ + if (rcalnewcodelp > 0x3f) + rcalnewcodelp = 0x3f; + if (rcalnewcode11 > 0x3f) + rcalnewcode11 = 0x3f; + /* REXT=1 BYP=1 RCAL_st1<5:0>=new rcal code */ + tmp = 0x00f8 + rcalnewcodelp * 256; + /* Program into AFE_CAL_CONFIG_2 */ + bcm_phy_write_misc(phydev, 0x0039, 0x0003, tmp); + /* AFE_BIAS_CONFIG_0 10BT bias code (Bias: E4) */ + bcm_phy_write_misc(phydev, 0x0038, 0x0001, 0xe7e4); + /* invert adc clock output and 'adc refp ldo current To correct + * default + */ + bcm_phy_write_misc(phydev, 0x003b, 0x0000, 0x8002); + /* 100BT stair case, high BW, 1G stair case, alternate encode */ + bcm_phy_write_misc(phydev, 0x003c, 0x0003, 0xf882); + /* 1000BT DAC transition method per Erol, bits[32], DAC Shuffle + * sequence 1 + 10BT imp adjust bits + */ + bcm_phy_write_misc(phydev, 0x003d, 0x0000, 0x3201); + /* Non-overlap fix */ + bcm_phy_write_misc(phydev, 0x003a, 0x0002, 0x0c00); + + /* pwdb override (rxconfig<5>) to turn on RX LDO indpendent of + * pwdb controls from DSP_TAP10 + */ + bcm_phy_write_misc(phydev, 0x003a, 0x0001, 0x0020); + + /* Remove references to channel 2 and 3 */ + bcm_phy_write_misc(phydev, 0x003b, 0x0002, 0x0000); + bcm_phy_write_misc(phydev, 0x003b, 0x0003, 0x0000); + + /* Set cal_bypassb bit rxconfig<43> */ + bcm_phy_write_misc(phydev, 0x003a, 0x0003, 0x0800); + udelay(2); + + /* Revert pwdb_override (rxconfig<5>) to 0 so that the RX pwr + * is controlled by DSP. + */ + bcm_phy_write_misc(phydev, 0x003a, 0x0001, 0x0000); + + /* Drop LSB */ + rcalnewcode11d2 = (rcalnewcode11 & 0xfffe) / 2; + tmp = bcm_phy_read_misc(phydev, 0x003d, 0x0001); + /* Clear bits [11:5] */ + tmp &= ~0xfe0; + /* set txcfg_ch0<5>=1 (enable + set local rcal) */ + tmp |= 0x0020 | (rcalnewcode11d2 * 64); + bcm_phy_write_misc(phydev, 0x003d, 0x0001, tmp); + bcm_phy_write_misc(phydev, 0x003d, 0x0002, tmp); + + tmp = bcm_phy_read_misc(phydev, 0x003d, 0x0000); + /* set txcfg<45:44>=11 (enable Rextra + invert fullscaledetect) + */ + tmp &= ~0x3000; + tmp |= 0x3000; + bcm_phy_write_misc(phydev, 0x003d, 0x0000, tmp); + + return 0; +} + +static int bcm7xxx_16nm_ephy_config_init(struct phy_device *phydev) +{ + int ret, val; + + ret = bcm7xxx_16nm_ephy_afe_config(phydev); + if (ret) + return ret; + + ret = bcm_phy_set_eee(phydev, true); + if (ret) + return ret; + + ret = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); + if (ret < 0) + return ret; + + val = ret; + + /* Auto power down of DLL enabled, + * TXC/RXC disabled during auto power down. + */ + val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS; + val |= BIT(8); + + ret = bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); + if (ret < 0) + return ret; + + return bcm_phy_enable_apd(phydev, true); +} + +static int bcm7xxx_16nm_ephy_resume(struct phy_device *phydev) +{ + int ret; + + /* Re-apply workarounds coming out suspend/resume */ + ret = bcm7xxx_16nm_ephy_config_init(phydev); + if (ret) + return ret; + + return genphy_config_aneg(phydev); +} + +#define MII_BCM7XXX_REG_INVALID 0xff + +static u8 bcm7xxx_28nm_ephy_regnum_to_shd(u16 regnum) +{ + switch (regnum) { + case MDIO_CTRL1: + return MII_BCM7XXX_SHD_3_PCS_CTRL; + case MDIO_STAT1: + return MII_BCM7XXX_SHD_3_PCS_STATUS; + case MDIO_PCS_EEE_ABLE: + return MII_BCM7XXX_SHD_3_EEE_CAP; + case MDIO_AN_EEE_ADV: + return MII_BCM7XXX_SHD_3_AN_EEE_ADV; + case MDIO_AN_EEE_LPABLE: + return MII_BCM7XXX_SHD_3_EEE_LP; + case MDIO_PCS_EEE_WK_ERR: + return MII_BCM7XXX_SHD_3_EEE_WK_ERR; + default: + return MII_BCM7XXX_REG_INVALID; + } +} + +static bool bcm7xxx_28nm_ephy_dev_valid(int devnum) +{ + return devnum == MDIO_MMD_AN || devnum == MDIO_MMD_PCS; +} + +static int bcm7xxx_28nm_ephy_read_mmd(struct phy_device *phydev, + int devnum, u16 regnum) +{ + u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum); + int ret; + + if (!bcm7xxx_28nm_ephy_dev_valid(devnum) || + shd == MII_BCM7XXX_REG_INVALID) + return -EOPNOTSUPP; + + /* set shadow mode 2 */ + ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Access the desired shadow register address */ + ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd); + if (ret < 0) + goto reset_shadow_mode; + + ret = __phy_read(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT); + +reset_shadow_mode: + /* reset shadow mode 2 */ + __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); + return ret; +} + +static int bcm7xxx_28nm_ephy_write_mmd(struct phy_device *phydev, + int devnum, u16 regnum, u16 val) +{ + u8 shd = bcm7xxx_28nm_ephy_regnum_to_shd(regnum); + int ret; + + if (!bcm7xxx_28nm_ephy_dev_valid(devnum) || + shd == MII_BCM7XXX_REG_INVALID) + return -EOPNOTSUPP; + + /* set shadow mode 2 */ + ret = __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, 0); + if (ret < 0) + return ret; + + /* Access the desired shadow register address */ + ret = __phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL, shd); + if (ret < 0) + goto reset_shadow_mode; + + /* Write the desired value in the shadow register */ + __phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT, val); + +reset_shadow_mode: + /* reset shadow mode 2 */ + return __phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, + MII_BCM7XXX_SHD_MODE_2); +} + +static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev) +{ + int ret; + + /* Re-apply workarounds coming out suspend/resume */ + ret = bcm7xxx_28nm_ephy_config_init(phydev); + if (ret) + return ret; + + return genphy_config_aneg(phydev); +} + +static int bcm7xxx_config_init(struct phy_device *phydev) +{ + int ret; + + /* Enable 64 clock MDIO */ + phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO); + phy_read(phydev, MII_BCM7XXX_AUX_MODE); + + /* set shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + + /* set iddq_clkbias */ + phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00); + udelay(10); + + /* reset iddq_clkbias */ + phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00); + + phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555); + + /* reset shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + + return 0; +} + +/* Workaround for putting the PHY in IDDQ mode, required + * for all BCM7XXX 40nm and 65nm PHYs + */ +static int bcm7xxx_suspend(struct phy_device *phydev) +{ + int ret; + static const struct bcm7xxx_regs { + int reg; + u16 value; + } bcm7xxx_suspend_cfg[] = { + { MII_BCM7XXX_TEST, 0x008b }, + { MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 }, + { MII_BCM7XXX_100TX_DISC, 0x7000 }, + { MII_BCM7XXX_TEST, 0x000f }, + { MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 }, + { MII_BCM7XXX_TEST, 0x000b }, + }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) { + ret = phy_write(phydev, + bcm7xxx_suspend_cfg[i].reg, + bcm7xxx_suspend_cfg[i].value); + if (ret) + return ret; + } + + return 0; +} + +static int bcm7xxx_28nm_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, + void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return bcm_phy_downshift_get(phydev, (u8 *)data); + default: + return -EOPNOTSUPP; + } +} + +static int bcm7xxx_28nm_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, + const void *data) +{ + u8 count = *(u8 *)data; + int ret; + + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + ret = bcm_phy_downshift_set(phydev, count); + break; + default: + return -EOPNOTSUPP; + } + + if (ret) + return ret; + + /* Disable EEE advertisement since this prevents the PHY + * from successfully linking up, trigger auto-negotiation restart + * to let the MAC decide what to do. + */ + ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE); + if (ret) + return ret; + + return genphy_restart_aneg(phydev); +} + +static void bcm7xxx_28nm_get_phy_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + struct bcm7xxx_phy_priv *priv = phydev->priv; + + bcm_phy_get_stats(phydev, priv->stats, stats, data); +} + +static int bcm7xxx_28nm_probe(struct phy_device *phydev) +{ + struct bcm7xxx_phy_priv *priv; + int ret = 0; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + priv->stats = devm_kcalloc(&phydev->mdio.dev, + bcm_phy_get_sset_count(phydev), sizeof(u64), + GFP_KERNEL); + if (!priv->stats) + return -ENOMEM; + + priv->clk = devm_clk_get_optional(&phydev->mdio.dev, NULL); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + /* Dummy read to a register to workaround an issue upon reset where the + * internal inverter may not allow the first MDIO transaction to pass + * the MDIO management controller and make us return 0xffff for such + * reads. This is needed to ensure that any subsequent reads to the + * PHY will succeed. + */ + phy_read(phydev, MII_BMSR); + + return ret; +} + +static void bcm7xxx_28nm_remove(struct phy_device *phydev) +{ + struct bcm7xxx_phy_priv *priv = phydev->priv; + + clk_disable_unprepare(priv->clk); +} + +#define BCM7XXX_28NM_GPHY(_oui, _name) \ +{ \ + .phy_id = (_oui), \ + .phy_id_mask = 0xfffffff0, \ + .name = _name, \ + /* PHY_GBIT_FEATURES */ \ + .flags = PHY_IS_INTERNAL, \ + .config_init = bcm7xxx_28nm_config_init, \ + .resume = bcm7xxx_28nm_resume, \ + .get_tunable = bcm7xxx_28nm_get_tunable, \ + .set_tunable = bcm7xxx_28nm_set_tunable, \ + .get_sset_count = bcm_phy_get_sset_count, \ + .get_strings = bcm_phy_get_strings, \ + .get_stats = bcm7xxx_28nm_get_phy_stats, \ + .probe = bcm7xxx_28nm_probe, \ + .remove = bcm7xxx_28nm_remove, \ +} + +#define BCM7XXX_28NM_EPHY(_oui, _name) \ +{ \ + .phy_id = (_oui), \ + .phy_id_mask = 0xfffffff0, \ + .name = _name, \ + /* PHY_BASIC_FEATURES */ \ + .flags = PHY_IS_INTERNAL, \ + .config_init = bcm7xxx_28nm_ephy_config_init, \ + .resume = bcm7xxx_28nm_ephy_resume, \ + .get_sset_count = bcm_phy_get_sset_count, \ + .get_strings = bcm_phy_get_strings, \ + .get_stats = bcm7xxx_28nm_get_phy_stats, \ + .probe = bcm7xxx_28nm_probe, \ + .remove = bcm7xxx_28nm_remove, \ + .read_mmd = bcm7xxx_28nm_ephy_read_mmd, \ + .write_mmd = bcm7xxx_28nm_ephy_write_mmd, \ +} + +#define BCM7XXX_40NM_EPHY(_oui, _name) \ +{ \ + .phy_id = (_oui), \ + .phy_id_mask = 0xfffffff0, \ + .name = _name, \ + /* PHY_BASIC_FEATURES */ \ + .flags = PHY_IS_INTERNAL, \ + .soft_reset = genphy_soft_reset, \ + .config_init = bcm7xxx_config_init, \ + .suspend = bcm7xxx_suspend, \ + .resume = bcm7xxx_config_init, \ +} + +#define BCM7XXX_16NM_EPHY(_oui, _name) \ +{ \ + .phy_id = (_oui), \ + .phy_id_mask = 0xfffffff0, \ + .name = _name, \ + /* PHY_BASIC_FEATURES */ \ + .flags = PHY_IS_INTERNAL, \ + .get_sset_count = bcm_phy_get_sset_count, \ + .get_strings = bcm_phy_get_strings, \ + .get_stats = bcm7xxx_28nm_get_phy_stats, \ + .probe = bcm7xxx_28nm_probe, \ + .remove = bcm7xxx_28nm_remove, \ + .config_init = bcm7xxx_16nm_ephy_config_init, \ + .config_aneg = genphy_config_aneg, \ + .read_status = genphy_read_status, \ + .resume = bcm7xxx_16nm_ephy_resume, \ +} + +static struct phy_driver bcm7xxx_driver[] = { + BCM7XXX_28NM_EPHY(PHY_ID_BCM72113, "Broadcom BCM72113"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM72116, "Broadcom BCM72116"), + BCM7XXX_16NM_EPHY(PHY_ID_BCM72165, "Broadcom BCM72165"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM7255, "Broadcom BCM7255"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM7268, "Broadcom BCM7268"), + BCM7XXX_28NM_EPHY(PHY_ID_BCM7271, "Broadcom BCM7271"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM74371, "Broadcom BCM74371"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"), + BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"), + BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"), + BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"), + BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"), + BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"), + BCM7XXX_16NM_EPHY(PHY_ID_BCM7712, "Broadcom BCM7712"), +}; + +static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { + { PHY_ID_BCM72113, 0xfffffff0 }, + { PHY_ID_BCM72116, 0xfffffff0, }, + { PHY_ID_BCM72165, 0xfffffff0, }, + { PHY_ID_BCM7250, 0xfffffff0, }, + { PHY_ID_BCM7255, 0xfffffff0, }, + { PHY_ID_BCM7260, 0xfffffff0, }, + { PHY_ID_BCM7268, 0xfffffff0, }, + { PHY_ID_BCM7271, 0xfffffff0, }, + { PHY_ID_BCM7278, 0xfffffff0, }, + { PHY_ID_BCM7364, 0xfffffff0, }, + { PHY_ID_BCM7366, 0xfffffff0, }, + { PHY_ID_BCM7346, 0xfffffff0, }, + { PHY_ID_BCM7362, 0xfffffff0, }, + { PHY_ID_BCM7425, 0xfffffff0, }, + { PHY_ID_BCM7429, 0xfffffff0, }, + { PHY_ID_BCM74371, 0xfffffff0, }, + { PHY_ID_BCM7439, 0xfffffff0, }, + { PHY_ID_BCM7435, 0xfffffff0, }, + { PHY_ID_BCM7445, 0xfffffff0, }, + { PHY_ID_BCM7712, 0xfffffff0, }, + { } +}; + +module_phy_driver(bcm7xxx_driver); + +MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl); + +MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Broadcom Corporation"); |