diff options
Diffstat (limited to 'drivers/net/phy/national.c')
| -rw-r--r-- | drivers/net/phy/national.c | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c new file mode 100644 index 000000000..9ae9cc6b2 --- /dev/null +++ b/drivers/net/phy/national.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/net/phy/national.c + * + * Driver for National Semiconductor PHYs + * + * Author: Stuart Menefy <stuart.menefy@st.com> + * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * Copyright (c) 2008 STMicroelectronics Limited + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> +#include <linux/netdevice.h> + +/* DP83865 phy identifier values */ +#define DP83865_PHY_ID 0x20005c7a + +#define DP83865_INT_STATUS 0x14 +#define DP83865_INT_MASK 0x15 +#define DP83865_INT_CLEAR 0x17 + +#define DP83865_INT_REMOTE_FAULT 0x0008 +#define DP83865_INT_ANE_COMPLETED 0x0010 +#define DP83865_INT_LINK_CHANGE 0xe000 +#define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \ + DP83865_INT_ANE_COMPLETED | \ + DP83865_INT_LINK_CHANGE) + +/* Advanced proprietary configuration */ +#define NS_EXP_MEM_CTL 0x16 +#define NS_EXP_MEM_DATA 0x1d +#define NS_EXP_MEM_ADD 0x1e + +#define LED_CTRL_REG 0x13 +#define AN_FALLBACK_AN 0x0001 +#define AN_FALLBACK_CRC 0x0002 +#define AN_FALLBACK_IE 0x0004 +#define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE) + +enum hdx_loopback { + hdx_loopback_on = 0, + hdx_loopback_off = 1, +}; + +static u8 ns_exp_read(struct phy_device *phydev, u16 reg) +{ + phy_write(phydev, NS_EXP_MEM_ADD, reg); + return phy_read(phydev, NS_EXP_MEM_DATA); +} + +static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data) +{ + phy_write(phydev, NS_EXP_MEM_ADD, reg); + phy_write(phydev, NS_EXP_MEM_DATA, data); +} + +static int ns_ack_interrupt(struct phy_device *phydev) +{ + int ret = phy_read(phydev, DP83865_INT_STATUS); + if (ret < 0) + return ret; + + /* Clear the interrupt status bit by writing a “1” + * to the corresponding bit in INT_CLEAR (2:0 are reserved) + */ + ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7); + + return ret; +} + +static irqreturn_t ns_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read(phydev, DP83865_INT_STATUS); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & DP83865_INT_MASK_DEFAULT)) + return IRQ_NONE; + + /* clear the interrupt */ + phy_write(phydev, DP83865_INT_CLEAR, irq_status & ~0x7); + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int ns_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = ns_ack_interrupt(phydev); + if (err) + return err; + + err = phy_write(phydev, DP83865_INT_MASK, + DP83865_INT_MASK_DEFAULT); + } else { + err = phy_write(phydev, DP83865_INT_MASK, 0); + if (err) + return err; + + err = ns_ack_interrupt(phydev); + } + + return err; +} + +static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) +{ + int bmcr = phy_read(phydev, MII_BMCR); + + phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); + + /* Enable 8 bit expended memory read/write (no auto increment) */ + phy_write(phydev, NS_EXP_MEM_CTL, 0); + phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0); + phy_write(phydev, NS_EXP_MEM_DATA, 0x0008); + phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); + phy_write(phydev, LED_CTRL_REG, mode); +} + +static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) +{ + u16 lb_dis = BIT(1); + + if (disable) + ns_exp_write(phydev, 0x1c0, + ns_exp_read(phydev, 0x1c0) | lb_dis); + else + ns_exp_write(phydev, 0x1c0, + ns_exp_read(phydev, 0x1c0) & ~lb_dis); + + pr_debug("10BASE-T HDX loopback %s\n", + (ns_exp_read(phydev, 0x1c0) & lb_dis) ? "off" : "on"); +} + +static int ns_config_init(struct phy_device *phydev) +{ + ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); + /* In the latest MAC or switches design, the 10 Mbps loopback + * is desired to be turned off. + */ + ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); + return ns_ack_interrupt(phydev); +} + +static struct phy_driver dp83865_driver[] = { { + .phy_id = DP83865_PHY_ID, + .phy_id_mask = 0xfffffff0, + .name = "NatSemi DP83865", + /* PHY_GBIT_FEATURES */ + .config_init = ns_config_init, + .config_intr = ns_config_intr, + .handle_interrupt = ns_handle_interrupt, +} }; + +module_phy_driver(dp83865_driver); + +MODULE_DESCRIPTION("NatSemi PHY driver"); +MODULE_AUTHOR("Stuart Menefy"); +MODULE_LICENSE("GPL"); + +static struct mdio_device_id __maybe_unused ns_tbl[] = { + { DP83865_PHY_ID, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, ns_tbl); |