diff options
Diffstat (limited to 'drivers/pci/controller')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-designware-ep.c | 7 | ||||
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom.c | 153 | ||||
| -rw-r--r-- | drivers/pci/controller/pci-hyperv.c | 3 |
3 files changed, 89 insertions, 74 deletions
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 4086a7818..506d6d061 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -669,8 +669,13 @@ int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep) nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >> PCI_REBAR_CTRL_NBAR_SHIFT; + /* + * PCIe r6.0, sec 7.8.6.2 require us to support at least one + * size in the range from 1 MB to 512 GB. Advertise support + * for 1 MB BAR size only. + */ for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL) - dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0); + dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, BIT(4)); } dw_pcie_setup(pci); diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 0ccd92faf..0bad23ec5 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -50,6 +50,7 @@ #define PARF_SLV_ADDR_SPACE_SIZE 0x358 #define PARF_DEVICE_TYPE 0x1000 #define PARF_BDF_TO_SID_TABLE_N 0x2000 +#define PARF_BDF_TO_SID_CFG 0x2c00 /* ELBI registers */ #define ELBI_SYS_CTRL 0x04 @@ -102,6 +103,9 @@ /* PARF_DEVICE_TYPE register fields */ #define DEVICE_TYPE_RC 0x4 +/* PARF_BDF_TO_SID_CFG fields */ +#define BDF_TO_SID_BYPASS BIT(0) + /* ELBI_SYS_CTRL register fields */ #define ELBI_SYS_CTRL_LT_ENABLE BIT(0) @@ -1312,6 +1316,82 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie) regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); } +static int qcom_pcie_config_sid_1_9_0(struct qcom_pcie *pcie) +{ + /* iommu map structure */ + struct { + u32 bdf; + u32 phandle; + u32 smmu_sid; + u32 smmu_sid_len; + } *map; + void __iomem *bdf_to_sid_base = pcie->parf + PARF_BDF_TO_SID_TABLE_N; + struct device *dev = pcie->pci->dev; + u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE]; + int i, nr_map, size = 0; + u32 smmu_sid_base; + u32 val; + + of_get_property(dev->of_node, "iommu-map", &size); + if (!size) + return 0; + + /* Enable BDF to SID translation by disabling bypass mode (default) */ + val = readl(pcie->parf + PARF_BDF_TO_SID_CFG); + val &= ~BDF_TO_SID_BYPASS; + writel(val, pcie->parf + PARF_BDF_TO_SID_CFG); + + map = kzalloc(size, GFP_KERNEL); + if (!map) + return -ENOMEM; + + of_property_read_u32_array(dev->of_node, "iommu-map", (u32 *)map, + size / sizeof(u32)); + + nr_map = size / (sizeof(*map)); + + crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL); + + /* Registers need to be zero out first */ + memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32)); + + /* Extract the SMMU SID base from the first entry of iommu-map */ + smmu_sid_base = map[0].smmu_sid; + + /* Look for an available entry to hold the mapping */ + for (i = 0; i < nr_map; i++) { + __be16 bdf_be = cpu_to_be16(map[i].bdf); + u32 val; + u8 hash; + + hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be), 0); + + val = readl(bdf_to_sid_base + hash * sizeof(u32)); + + /* If the register is already populated, look for next available entry */ + while (val) { + u8 current_hash = hash++; + u8 next_mask = 0xff; + + /* If NEXT field is NULL then update it with next hash */ + if (!(val & next_mask)) { + val |= (u32)hash; + writel(val, bdf_to_sid_base + current_hash * sizeof(u32)); + } + + val = readl(bdf_to_sid_base + hash * sizeof(u32)); + } + + /* BDF [31:16] | SID [15:8] | NEXT [7:0] */ + val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0; + writel(val, bdf_to_sid_base + hash * sizeof(u32)); + } + + kfree(map); + + return 0; +} + static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) { struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; @@ -1429,77 +1509,6 @@ static int qcom_pcie_link_up(struct dw_pcie *pci) return !!(val & PCI_EXP_LNKSTA_DLLLA); } -static int qcom_pcie_config_sid_sm8250(struct qcom_pcie *pcie) -{ - /* iommu map structure */ - struct { - u32 bdf; - u32 phandle; - u32 smmu_sid; - u32 smmu_sid_len; - } *map; - void __iomem *bdf_to_sid_base = pcie->parf + PARF_BDF_TO_SID_TABLE_N; - struct device *dev = pcie->pci->dev; - u8 qcom_pcie_crc8_table[CRC8_TABLE_SIZE]; - int i, nr_map, size = 0; - u32 smmu_sid_base; - - of_get_property(dev->of_node, "iommu-map", &size); - if (!size) - return 0; - - map = kzalloc(size, GFP_KERNEL); - if (!map) - return -ENOMEM; - - of_property_read_u32_array(dev->of_node, - "iommu-map", (u32 *)map, size / sizeof(u32)); - - nr_map = size / (sizeof(*map)); - - crc8_populate_msb(qcom_pcie_crc8_table, QCOM_PCIE_CRC8_POLYNOMIAL); - - /* Registers need to be zero out first */ - memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32)); - - /* Extract the SMMU SID base from the first entry of iommu-map */ - smmu_sid_base = map[0].smmu_sid; - - /* Look for an available entry to hold the mapping */ - for (i = 0; i < nr_map; i++) { - __be16 bdf_be = cpu_to_be16(map[i].bdf); - u32 val; - u8 hash; - - hash = crc8(qcom_pcie_crc8_table, (u8 *)&bdf_be, sizeof(bdf_be), - 0); - - val = readl(bdf_to_sid_base + hash * sizeof(u32)); - - /* If the register is already populated, look for next available entry */ - while (val) { - u8 current_hash = hash++; - u8 next_mask = 0xff; - - /* If NEXT field is NULL then update it with next hash */ - if (!(val & next_mask)) { - val |= (u32)hash; - writel(val, bdf_to_sid_base + current_hash * sizeof(u32)); - } - - val = readl(bdf_to_sid_base + hash * sizeof(u32)); - } - - /* BDF [31:16] | SID [15:8] | NEXT [7:0] */ - val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0; - writel(val, bdf_to_sid_base + hash * sizeof(u32)); - } - - kfree(map); - - return 0; -} - static int qcom_pcie_host_init(struct dw_pcie_rp *pp) { struct dw_pcie *pci = to_dw_pcie_from_pp(pp); @@ -1616,7 +1625,7 @@ static const struct qcom_pcie_ops ops_1_9_0 = { .init = qcom_pcie_init_2_7_0, .deinit = qcom_pcie_deinit_2_7_0, .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, - .config_sid = qcom_pcie_config_sid_sm8250, + .config_sid = qcom_pcie_config_sid_1_9_0, }; /* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 9693bab59..b36cbc913 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -49,6 +49,7 @@ #include <linux/refcount.h> #include <linux/irqdomain.h> #include <linux/acpi.h> +#include <linux/sizes.h> #include <asm/mshyperv.h> /* @@ -465,7 +466,7 @@ struct pci_eject_response { u32 status; } __packed; -static int pci_ring_size = (4 * PAGE_SIZE); +static int pci_ring_size = VMBUS_RING_SIZE(SZ_16K); /* * Driver specific state. |