diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/pci/pci.c | 78 |
1 files changed, 52 insertions, 26 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5368a3715..67956bfeb 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1258,6 +1258,7 @@ end: /** * pci_set_full_power_state - Put a PCI device into D0 and update its state * @dev: PCI device to power up + * @locked: whether pci_bus_sem is held * * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register * to confirm the state change, restore its BARs if they might be lost and @@ -1267,7 +1268,7 @@ end: * to D0, it is more efficient to use pci_power_up() directly instead of this * function. */ -static int pci_set_full_power_state(struct pci_dev *dev) +static int pci_set_full_power_state(struct pci_dev *dev, bool locked) { u16 pmcsr; int ret; @@ -1303,7 +1304,7 @@ static int pci_set_full_power_state(struct pci_dev *dev) } if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); + pcie_aspm_pm_state_change(dev->bus->self, locked); return 0; } @@ -1332,10 +1333,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) pci_walk_bus(bus, __pci_dev_set_current_state, &state); } +static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked) +{ + if (!bus) + return; + + if (locked) + pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state); + else + pci_walk_bus(bus, __pci_dev_set_current_state, &state); +} + /** * pci_set_low_power_state - Put a PCI device into a low-power state. * @dev: PCI device to handle. * @state: PCI power state (D1, D2, D3hot) to put the device into. + * @locked: whether pci_bus_sem is held * * Use the device's PCI_PM_CTRL register to put it into a low-power state. * @@ -1346,7 +1359,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) * 0 if device already is in the requested state. * 0 if device's power state has been successfully changed. */ -static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) +static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked) { u16 pmcsr; @@ -1400,29 +1413,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) pci_power_name(state)); if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); + pcie_aspm_pm_state_change(dev->bus->self, locked); return 0; } -/** - * pci_set_power_state - Set the power state of a PCI device - * @dev: PCI device to handle. - * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. - * - * Transition a device to a new power state, using the platform firmware and/or - * the device's PCI PM registers. - * - * RETURN VALUE: - * -EINVAL if the requested state is invalid. - * -EIO if device does not support PCI PM or its PM capabilities register has a - * wrong version, or device doesn't support the requested state. - * 0 if the transition is to D1 or D2 but D1 and D2 are not supported. - * 0 if device already is in the requested state. - * 0 if the transition is to D3 but D3 is not supported. - * 0 if device's power state has been successfully changed. - */ -int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked) { int error; @@ -1446,7 +1442,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; if (state == PCI_D0) - return pci_set_full_power_state(dev); + return pci_set_full_power_state(dev, locked); /* * This device is quirked not to be put into D3, so don't put it in @@ -1460,16 +1456,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) * To put the device in D3cold, put it into D3hot in the native * way, then put it into D3cold using platform ops. */ - error = pci_set_low_power_state(dev, PCI_D3hot); + error = pci_set_low_power_state(dev, PCI_D3hot, locked); if (pci_platform_power_transition(dev, PCI_D3cold)) return error; /* Powering off a bridge may power off the whole hierarchy */ if (dev->current_state == PCI_D3cold) - pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + __pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked); } else { - error = pci_set_low_power_state(dev, state); + error = pci_set_low_power_state(dev, state, locked); if (pci_platform_power_transition(dev, state)) return error; @@ -1477,8 +1473,38 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } + +/** + * pci_set_power_state - Set the power state of a PCI device + * @dev: PCI device to handle. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * + * Transition a device to a new power state, using the platform firmware and/or + * the device's PCI PM registers. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if the transition is to D1 or D2 but D1 and D2 are not supported. + * 0 if device already is in the requested state. + * 0 if the transition is to D3 but D3 is not supported. + * 0 if device's power state has been successfully changed. + */ +int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +{ + return __pci_set_power_state(dev, state, false); +} EXPORT_SYMBOL(pci_set_power_state); +int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state) +{ + lockdep_assert_held(&pci_bus_sem); + + return __pci_set_power_state(dev, state, true); +} +EXPORT_SYMBOL(pci_set_power_state_locked); + #define PCI_EXP_SAVE_REGS 7 static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev, |