summaryrefslogtreecommitdiffstats
path: root/drivers/phy/qualcomm/phy-qcom-qusb2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-qusb2.c')
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qusb2.c1106
1 files changed, 1106 insertions, 0 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
new file mode 100644
index 000000000..2ef638b32
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -0,0 +1,1106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+
+#define QUSB2PHY_PLL 0x0
+#define QUSB2PHY_PLL_TEST 0x04
+#define CLK_REF_SEL BIT(7)
+
+#define QUSB2PHY_PLL_TUNE 0x08
+#define QUSB2PHY_PLL_USER_CTL1 0x0c
+#define QUSB2PHY_PLL_USER_CTL2 0x10
+#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c
+#define QUSB2PHY_PLL_PWR_CTRL 0x18
+
+/* QUSB2PHY_PLL_STATUS register bits */
+#define PLL_LOCKED BIT(5)
+
+/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */
+#define CORE_READY_STATUS BIT(0)
+
+/* QUSB2PHY_PORT_POWERDOWN register bits */
+#define CLAMP_N_EN BIT(5)
+#define FREEZIO_N BIT(1)
+#define POWER_DOWN BIT(0)
+
+/* QUSB2PHY_PWR_CTRL1 register bits */
+#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5)
+#define PWR_CTRL1_CLAMP_N_EN BIT(1)
+
+#define QUSB2PHY_REFCLK_ENABLE BIT(0)
+
+#define PHY_CLK_SCHEME_SEL BIT(0)
+
+/* QUSB2PHY_INTR_CTRL register bits */
+#define DMSE_INTR_HIGH_SEL BIT(4)
+#define DPSE_INTR_HIGH_SEL BIT(3)
+#define CHG_DET_INTR_EN BIT(2)
+#define DMSE_INTR_EN BIT(1)
+#define DPSE_INTR_EN BIT(0)
+
+/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */
+#define CORE_PLL_EN_FROM_RESET BIT(4)
+#define CORE_RESET BIT(5)
+#define CORE_RESET_MUX BIT(6)
+
+/* QUSB2PHY_IMP_CTRL1 register bits */
+#define IMP_RES_OFFSET_MASK GENMASK(5, 0)
+#define IMP_RES_OFFSET_SHIFT 0x0
+
+/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */
+#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0)
+#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0
+
+/* QUSB2PHY_CHG_CONTROL_2 register bits */
+#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4)
+#define CHG_CTRL2_OFFSET_SHIFT 0x4
+
+/* QUSB2PHY_PORT_TUNE1 register bits */
+#define HSTX_TRIM_MASK GENMASK(7, 4)
+#define HSTX_TRIM_SHIFT 0x4
+#define PREEMPH_WIDTH_HALF_BIT BIT(2)
+#define PREEMPHASIS_EN_MASK GENMASK(1, 0)
+#define PREEMPHASIS_EN_SHIFT 0x0
+
+/* QUSB2PHY_PORT_TUNE2 register bits */
+#define HSDISC_TRIM_MASK GENMASK(1, 0)
+#define HSDISC_TRIM_SHIFT 0x0
+
+#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04
+#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c
+#define QUSB2PHY_PLL_CMODE 0x2c
+#define QUSB2PHY_PLL_LOCK_DELAY 0x184
+#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4
+#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194
+#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198
+#define QUSB2PHY_PWR_CTRL2 0x214
+#define QUSB2PHY_IMP_CTRL1 0x220
+#define QUSB2PHY_IMP_CTRL2 0x224
+#define QUSB2PHY_CHG_CTRL2 0x23c
+
+struct qusb2_phy_init_tbl {
+ unsigned int offset;
+ unsigned int val;
+ /*
+ * register part of layout ?
+ * if yes, then offset gives index in the reg-layout
+ */
+ int in_layout;
+};
+
+#define QUSB2_PHY_INIT_CFG(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ }
+
+#define QUSB2_PHY_INIT_CFG_L(o, v) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .in_layout = 1, \
+ }
+
+/* set of registers with offsets different per-PHY */
+enum qusb2phy_reg_layout {
+ QUSB2PHY_PLL_CORE_INPUT_OVERRIDE,
+ QUSB2PHY_PLL_STATUS,
+ QUSB2PHY_PORT_TUNE1,
+ QUSB2PHY_PORT_TUNE2,
+ QUSB2PHY_PORT_TUNE3,
+ QUSB2PHY_PORT_TUNE4,
+ QUSB2PHY_PORT_TUNE5,
+ QUSB2PHY_PORT_TEST1,
+ QUSB2PHY_PORT_TEST2,
+ QUSB2PHY_PORT_POWERDOWN,
+ QUSB2PHY_INTR_CTRL,
+};
+
+static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
+};
+
+static const unsigned int ipq6018_regs_layout[] = {
+ [QUSB2PHY_PLL_STATUS] = 0x38,
+ [QUSB2PHY_PORT_TUNE1] = 0x80,
+ [QUSB2PHY_PORT_TUNE2] = 0x84,
+ [QUSB2PHY_PORT_TUNE3] = 0x88,
+ [QUSB2PHY_PORT_TUNE4] = 0x8C,
+ [QUSB2PHY_PORT_TUNE5] = 0x90,
+ [QUSB2PHY_PORT_TEST1] = 0x98,
+ [QUSB2PHY_PORT_TEST2] = 0x9C,
+ [QUSB2PHY_PORT_POWERDOWN] = 0xB4,
+ [QUSB2PHY_INTR_CTRL] = 0xBC,
+};
+
+static const unsigned int msm8996_regs_layout[] = {
+ [QUSB2PHY_PLL_STATUS] = 0x38,
+ [QUSB2PHY_PORT_TUNE1] = 0x80,
+ [QUSB2PHY_PORT_TUNE2] = 0x84,
+ [QUSB2PHY_PORT_TUNE3] = 0x88,
+ [QUSB2PHY_PORT_TUNE4] = 0x8c,
+ [QUSB2PHY_PORT_TUNE5] = 0x90,
+ [QUSB2PHY_PORT_TEST1] = 0xb8,
+ [QUSB2PHY_PORT_TEST2] = 0x9c,
+ [QUSB2PHY_PORT_POWERDOWN] = 0xb4,
+ [QUSB2PHY_INTR_CTRL] = 0xbc,
+};
+
+static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc0),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+};
+
+static const unsigned int msm8998_regs_layout[] = {
+ [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
+ [QUSB2PHY_PLL_STATUS] = 0x1a0,
+ [QUSB2PHY_PORT_TUNE1] = 0x23c,
+ [QUSB2PHY_PORT_TUNE2] = 0x240,
+ [QUSB2PHY_PORT_TUNE3] = 0x244,
+ [QUSB2PHY_PORT_TUNE4] = 0x248,
+ [QUSB2PHY_PORT_TEST1] = 0x24c,
+ [QUSB2PHY_PORT_TEST2] = 0x250,
+ [QUSB2PHY_PORT_POWERDOWN] = 0x210,
+ [QUSB2PHY_INTR_CTRL] = 0x22c,
+};
+
+static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+};
+
+static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+};
+
+static const unsigned int qusb2_v2_regs_layout[] = {
+ [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
+ [QUSB2PHY_PLL_STATUS] = 0x1a0,
+ [QUSB2PHY_PORT_TUNE1] = 0x240,
+ [QUSB2PHY_PORT_TUNE2] = 0x244,
+ [QUSB2PHY_PORT_TUNE3] = 0x248,
+ [QUSB2PHY_PORT_TUNE4] = 0x24c,
+ [QUSB2PHY_PORT_TUNE5] = 0x250,
+ [QUSB2PHY_PORT_TEST1] = 0x254,
+ [QUSB2PHY_PORT_TEST2] = 0x258,
+ [QUSB2PHY_PORT_POWERDOWN] = 0x210,
+ [QUSB2PHY_INTR_CTRL] = 0x230,
+};
+
+static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
+};
+
+struct qusb2_phy_cfg {
+ const struct qusb2_phy_init_tbl *tbl;
+ /* number of entries in the table */
+ unsigned int tbl_num;
+ /* offset to PHY_CLK_SCHEME register in TCSR map */
+ unsigned int clk_scheme_offset;
+
+ /* array of registers with different offsets */
+ const unsigned int *regs;
+ unsigned int mask_core_ready;
+ unsigned int disable_ctrl;
+ unsigned int autoresume_en;
+
+ /* true if PHY has PLL_TEST register to select clk_scheme */
+ bool has_pll_test;
+
+ /* true if TUNE1 register must be updated by fused value, else TUNE2 */
+ bool update_tune1_with_efuse;
+
+ /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
+ bool has_pll_override;
+
+ /* true if PHY default clk scheme is single-ended */
+ bool se_clk_scheme_default;
+};
+
+static const struct qusb2_phy_cfg msm8996_phy_cfg = {
+ .tbl = msm8996_init_tbl,
+ .tbl_num = ARRAY_SIZE(msm8996_init_tbl),
+ .regs = msm8996_regs_layout,
+
+ .has_pll_test = true,
+ .se_clk_scheme_default = true,
+ .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+ .mask_core_ready = PLL_LOCKED,
+ .autoresume_en = BIT(3),
+};
+
+static const struct qusb2_phy_cfg msm8998_phy_cfg = {
+ .tbl = msm8998_init_tbl,
+ .tbl_num = ARRAY_SIZE(msm8998_init_tbl),
+ .regs = msm8998_regs_layout,
+
+ .disable_ctrl = POWER_DOWN,
+ .mask_core_ready = CORE_READY_STATUS,
+ .has_pll_override = true,
+ .se_clk_scheme_default = true,
+ .autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
+};
+
+static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
+ .tbl = ipq6018_init_tbl,
+ .tbl_num = ARRAY_SIZE(ipq6018_init_tbl),
+ .regs = ipq6018_regs_layout,
+
+ .disable_ctrl = POWER_DOWN,
+ .mask_core_ready = PLL_LOCKED,
+ /* autoresume not used */
+ .autoresume_en = BIT(0),
+};
+
+static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
+ .tbl = qusb2_v2_init_tbl,
+ .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
+ .regs = qusb2_v2_regs_layout,
+
+ .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
+ POWER_DOWN),
+ .mask_core_ready = CORE_READY_STATUS,
+ .has_pll_override = true,
+ .se_clk_scheme_default = true,
+ .autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
+};
+
+static const struct qusb2_phy_cfg sdm660_phy_cfg = {
+ .tbl = msm8996_init_tbl,
+ .tbl_num = ARRAY_SIZE(msm8996_init_tbl),
+ .regs = msm8996_regs_layout,
+
+ .has_pll_test = true,
+ .se_clk_scheme_default = false,
+ .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+ .mask_core_ready = PLL_LOCKED,
+ .autoresume_en = BIT(3),
+};
+
+static const struct qusb2_phy_cfg sm6115_phy_cfg = {
+ .tbl = sm6115_init_tbl,
+ .tbl_num = ARRAY_SIZE(sm6115_init_tbl),
+ .regs = msm8996_regs_layout,
+
+ .has_pll_test = true,
+ .se_clk_scheme_default = true,
+ .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+ .mask_core_ready = PLL_LOCKED,
+ .autoresume_en = BIT(3),
+};
+
+static const char * const qusb2_phy_vreg_names[] = {
+ "vdd", "vdda-pll", "vdda-phy-dpdm",
+};
+
+#define QUSB2_NUM_VREGS ARRAY_SIZE(qusb2_phy_vreg_names)
+
+/* struct override_param - structure holding qusb2 v2 phy overriding param
+ * set override true if the device tree property exists and read and assign
+ * to value
+ */
+struct override_param {
+ bool override;
+ u8 value;
+};
+
+/*struct override_params - structure holding qusb2 v2 phy overriding params
+ * @imp_res_offset: rescode offset to be updated in IMP_CTRL1 register
+ * @hstx_trim: HSTX_TRIM to be updated in TUNE1 register
+ * @preemphasis: Amplitude Pre-Emphasis to be updated in TUNE1 register
+ * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1
+ * @bias_ctrl: bias ctrl to be updated in BIAS_CONTROL_2 register
+ * @charge_ctrl: charge ctrl to be updated in CHG_CTRL2 register
+ * @hsdisc_trim: disconnect threshold to be updated in TUNE2 register
+ */
+struct override_params {
+ struct override_param imp_res_offset;
+ struct override_param hstx_trim;
+ struct override_param preemphasis;
+ struct override_param preemphasis_width;
+ struct override_param bias_ctrl;
+ struct override_param charge_ctrl;
+ struct override_param hsdisc_trim;
+};
+
+/**
+ * struct qusb2_phy - structure holding qusb2 phy attributes
+ *
+ * @phy: generic phy
+ * @base: iomapped memory space for qubs2 phy
+ *
+ * @cfg_ahb_clk: AHB2PHY interface clock
+ * @ref_clk: phy reference clock
+ * @iface_clk: phy interface clock
+ * @phy_reset: phy reset control
+ * @vregs: regulator supplies bulk data
+ *
+ * @tcsr: TCSR syscon register map
+ * @cell: nvmem cell containing phy tuning value
+ *
+ * @overrides: pointer to structure for all overriding tuning params
+ *
+ * @cfg: phy config data
+ * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
+ * @phy_initialized: indicate if PHY has been initialized
+ * @mode: current PHY mode
+ */
+struct qusb2_phy {
+ struct phy *phy;
+ void __iomem *base;
+
+ struct clk *cfg_ahb_clk;
+ struct clk *ref_clk;
+ struct clk *iface_clk;
+ struct reset_control *phy_reset;
+ struct regulator_bulk_data vregs[QUSB2_NUM_VREGS];
+
+ struct regmap *tcsr;
+ struct nvmem_cell *cell;
+
+ struct override_params overrides;
+
+ const struct qusb2_phy_cfg *cfg;
+ bool has_se_clk_scheme;
+ bool phy_initialized;
+ enum phy_mode mode;
+};
+
+static inline void qusb2_write_mask(void __iomem *base, u32 offset,
+ u32 val, u32 mask)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~mask;
+ reg |= val & mask;
+ writel(reg, base + offset);
+
+ /* Ensure above write is completed */
+ readl(base + offset);
+}
+
+static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg |= val;
+ writel(reg, base + offset);
+
+ /* Ensure above write is completed */
+ readl(base + offset);
+}
+
+static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~val;
+ writel(reg, base + offset);
+
+ /* Ensure above write is completed */
+ readl(base + offset);
+}
+
+static inline
+void qcom_qusb2_phy_configure(void __iomem *base,
+ const unsigned int *regs,
+ const struct qusb2_phy_init_tbl tbl[], int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ if (tbl[i].in_layout)
+ writel(tbl[i].val, base + regs[tbl[i].offset]);
+ else
+ writel(tbl[i].val, base + tbl[i].offset);
+ }
+}
+
+/*
+ * Update board specific PHY tuning override values if specified from
+ * device tree.
+ */
+static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy)
+{
+ const struct qusb2_phy_cfg *cfg = qphy->cfg;
+ struct override_params *or = &qphy->overrides;
+
+ if (or->imp_res_offset.override)
+ qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1,
+ or->imp_res_offset.value << IMP_RES_OFFSET_SHIFT,
+ IMP_RES_OFFSET_MASK);
+
+ if (or->bias_ctrl.override)
+ qusb2_write_mask(qphy->base, QUSB2PHY_PLL_BIAS_CONTROL_2,
+ or->bias_ctrl.value << BIAS_CTRL2_RES_OFFSET_SHIFT,
+ BIAS_CTRL2_RES_OFFSET_MASK);
+
+ if (or->charge_ctrl.override)
+ qusb2_write_mask(qphy->base, QUSB2PHY_CHG_CTRL2,
+ or->charge_ctrl.value << CHG_CTRL2_OFFSET_SHIFT,
+ CHG_CTRL2_OFFSET_MASK);
+
+ if (or->hstx_trim.override)
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+ or->hstx_trim.value << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
+
+ if (or->preemphasis.override)
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+ or->preemphasis.value << PREEMPHASIS_EN_SHIFT,
+ PREEMPHASIS_EN_MASK);
+
+ if (or->preemphasis_width.override) {
+ if (or->preemphasis_width.value ==
+ QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT)
+ qusb2_setbits(qphy->base,
+ cfg->regs[QUSB2PHY_PORT_TUNE1],
+ PREEMPH_WIDTH_HALF_BIT);
+ else
+ qusb2_clrbits(qphy->base,
+ cfg->regs[QUSB2PHY_PORT_TUNE1],
+ PREEMPH_WIDTH_HALF_BIT);
+ }
+
+ if (or->hsdisc_trim.override)
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+ or->hsdisc_trim.value << HSDISC_TRIM_SHIFT,
+ HSDISC_TRIM_MASK);
+}
+
+/*
+ * Fetches HS Tx tuning value from nvmem and sets the
+ * QUSB2PHY_PORT_TUNE1/2 register.
+ * For error case, skip setting the value and use the default value.
+ */
+static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
+{
+ struct device *dev = &qphy->phy->dev;
+ const struct qusb2_phy_cfg *cfg = qphy->cfg;
+ u8 *val, hstx_trim;
+
+ /* efuse register is optional */
+ if (!qphy->cell)
+ return;
+
+ /*
+ * Read efuse register having TUNE2/1 parameter's high nibble.
+ * If efuse register shows value as 0x0 (indicating value is not
+ * fused), or if we fail to find a valid efuse register setting,
+ * then use default value for high nibble that we have already
+ * set while configuring the phy.
+ */
+ val = nvmem_cell_read(qphy->cell, NULL);
+ if (IS_ERR(val)) {
+ dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
+ return;
+ }
+ hstx_trim = val[0];
+ kfree(val);
+ if (!hstx_trim) {
+ dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
+ return;
+ }
+
+ /* Fused TUNE1/2 value is the higher nibble only */
+ if (cfg->update_tune1_with_efuse)
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+ hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
+ else
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+ hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
+}
+
+static int qusb2_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct qusb2_phy *qphy = phy_get_drvdata(phy);
+
+ qphy->mode = mode;
+
+ return 0;
+}
+
+static int __maybe_unused qusb2_phy_runtime_suspend(struct device *dev)
+{
+ struct qusb2_phy *qphy = dev_get_drvdata(dev);
+ const struct qusb2_phy_cfg *cfg = qphy->cfg;
+ u32 intr_mask;
+
+ dev_vdbg(dev, "Suspending QUSB2 Phy, mode:%d\n", qphy->mode);
+
+ if (!qphy->phy_initialized) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ /*
+ * Enable DP/DM interrupts to detect line state changes based on current
+ * speed. In other words, enable the triggers _opposite_ of what the
+ * current D+/D- levels are e.g. if currently D+ high, D- low
+ * (HS 'J'/Suspend), configure the mask to trigger on D+ low OR D- high
+ */
+ intr_mask = DPSE_INTR_EN | DMSE_INTR_EN;
+ switch (qphy->mode) {
+ case PHY_MODE_USB_HOST_HS:
+ case PHY_MODE_USB_HOST_FS:
+ case PHY_MODE_USB_DEVICE_HS:
+ case PHY_MODE_USB_DEVICE_FS:
+ intr_mask |= DMSE_INTR_HIGH_SEL;
+ break;
+ case PHY_MODE_USB_HOST_LS:
+ case PHY_MODE_USB_DEVICE_LS:
+ intr_mask |= DPSE_INTR_HIGH_SEL;
+ break;
+ default:
+ /* No device connected, enable both DP/DM high interrupt */
+ intr_mask |= DMSE_INTR_HIGH_SEL;
+ intr_mask |= DPSE_INTR_HIGH_SEL;
+ break;
+ }
+
+ writel(intr_mask, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
+
+ /* hold core PLL into reset */
+ if (cfg->has_pll_override) {
+ qusb2_setbits(qphy->base,
+ cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
+ CORE_PLL_EN_FROM_RESET | CORE_RESET |
+ CORE_RESET_MUX);
+ }
+
+ /* enable phy auto-resume only if device is connected on bus */
+ if (qphy->mode != PHY_MODE_INVALID) {
+ qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
+ cfg->autoresume_en);
+ /* Autoresume bit has to be toggled in order to enable it */
+ qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
+ cfg->autoresume_en);
+ }
+
+ if (!qphy->has_se_clk_scheme)
+ clk_disable_unprepare(qphy->ref_clk);
+
+ clk_disable_unprepare(qphy->cfg_ahb_clk);
+ clk_disable_unprepare(qphy->iface_clk);
+
+ return 0;
+}
+
+static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev)
+{
+ struct qusb2_phy *qphy = dev_get_drvdata(dev);
+ const struct qusb2_phy_cfg *cfg = qphy->cfg;
+ int ret;
+
+ dev_vdbg(dev, "Resuming QUSB2 phy, mode:%d\n", qphy->mode);
+
+ if (!qphy->phy_initialized) {
+ dev_vdbg(dev, "PHY not initialized, bailing out\n");
+ return 0;
+ }
+
+ ret = clk_prepare_enable(qphy->iface_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable iface_clk, %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(qphy->cfg_ahb_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable cfg ahb clock, %d\n", ret);
+ goto disable_iface_clk;
+ }
+
+ if (!qphy->has_se_clk_scheme) {
+ ret = clk_prepare_enable(qphy->ref_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable ref clk, %d\n", ret);
+ goto disable_ahb_clk;
+ }
+ }
+
+ writel(0x0, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
+
+ /* bring core PLL out of reset */
+ if (cfg->has_pll_override) {
+ qusb2_clrbits(qphy->base,
+ cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
+ CORE_RESET | CORE_RESET_MUX);
+ }
+
+ return 0;
+
+disable_ahb_clk:
+ clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+ clk_disable_unprepare(qphy->iface_clk);
+
+ return ret;
+}
+
+static int qusb2_phy_init(struct phy *phy)
+{
+ struct qusb2_phy *qphy = phy_get_drvdata(phy);
+ const struct qusb2_phy_cfg *cfg = qphy->cfg;
+ unsigned int val = 0;
+ unsigned int clk_scheme;
+ int ret;
+
+ dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
+
+ /* turn on regulator supplies */
+ ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(qphy->iface_clk);
+ if (ret) {
+ dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
+ goto poweroff_phy;
+ }
+
+ /* enable ahb interface clock to program phy */
+ ret = clk_prepare_enable(qphy->cfg_ahb_clk);
+ if (ret) {
+ dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
+ goto disable_iface_clk;
+ }
+
+ /* Perform phy reset */
+ ret = reset_control_assert(qphy->phy_reset);
+ if (ret) {
+ dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
+ goto disable_ahb_clk;
+ }
+
+ /* 100 us delay to keep PHY in reset mode */
+ usleep_range(100, 150);
+
+ ret = reset_control_deassert(qphy->phy_reset);
+ if (ret) {
+ dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
+ goto disable_ahb_clk;
+ }
+
+ /* Disable the PHY */
+ qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+ qphy->cfg->disable_ctrl);
+
+ if (cfg->has_pll_test) {
+ /* save reset value to override reference clock scheme later */
+ val = readl(qphy->base + QUSB2PHY_PLL_TEST);
+ }
+
+ qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl,
+ cfg->tbl_num);
+
+ /* Override board specific PHY tuning values */
+ qusb2_phy_override_phy_params(qphy);
+
+ /* Set efuse value for tuning the PHY */
+ qusb2_phy_set_tune2_param(qphy);
+
+ /* Enable the PHY */
+ qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+ POWER_DOWN);
+
+ /* Required to get phy pll lock successfully */
+ usleep_range(150, 160);
+
+ /*
+ * Not all the SoCs have got a readable TCSR_PHY_CLK_SCHEME
+ * register in the TCSR so, if there's none, use the default
+ * value hardcoded in the configuration.
+ */
+ qphy->has_se_clk_scheme = cfg->se_clk_scheme_default;
+
+ /*
+ * read TCSR_PHY_CLK_SCHEME register to check if single-ended
+ * clock scheme is selected. If yes, then disable differential
+ * ref_clk and use single-ended clock, otherwise use differential
+ * ref_clk only.
+ */
+ if (qphy->tcsr) {
+ ret = regmap_read(qphy->tcsr, qphy->cfg->clk_scheme_offset,
+ &clk_scheme);
+ if (ret) {
+ dev_err(&phy->dev, "failed to read clk scheme reg\n");
+ goto assert_phy_reset;
+ }
+
+ /* is it a differential clock scheme ? */
+ if (!(clk_scheme & PHY_CLK_SCHEME_SEL)) {
+ dev_vdbg(&phy->dev, "%s(): select differential clk\n",
+ __func__);
+ qphy->has_se_clk_scheme = false;
+ } else {
+ dev_vdbg(&phy->dev, "%s(): select single-ended clk\n",
+ __func__);
+ }
+ }
+
+ if (!qphy->has_se_clk_scheme) {
+ ret = clk_prepare_enable(qphy->ref_clk);
+ if (ret) {
+ dev_err(&phy->dev, "failed to enable ref clk, %d\n",
+ ret);
+ goto assert_phy_reset;
+ }
+ }
+
+ if (cfg->has_pll_test) {
+ if (!qphy->has_se_clk_scheme)
+ val &= ~CLK_REF_SEL;
+ else
+ val |= CLK_REF_SEL;
+
+ writel(val, qphy->base + QUSB2PHY_PLL_TEST);
+
+ /* ensure above write is through */
+ readl(qphy->base + QUSB2PHY_PLL_TEST);
+ }
+
+ /* Required to get phy pll lock successfully */
+ usleep_range(100, 110);
+
+ val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]);
+ if (!(val & cfg->mask_core_ready)) {
+ dev_err(&phy->dev,
+ "QUSB2PHY pll lock failed: status reg = %x\n", val);
+ ret = -EBUSY;
+ goto disable_ref_clk;
+ }
+ qphy->phy_initialized = true;
+
+ return 0;
+
+disable_ref_clk:
+ if (!qphy->has_se_clk_scheme)
+ clk_disable_unprepare(qphy->ref_clk);
+assert_phy_reset:
+ reset_control_assert(qphy->phy_reset);
+disable_ahb_clk:
+ clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+ clk_disable_unprepare(qphy->iface_clk);
+poweroff_phy:
+ regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+
+ return ret;
+}
+
+static int qusb2_phy_exit(struct phy *phy)
+{
+ struct qusb2_phy *qphy = phy_get_drvdata(phy);
+
+ /* Disable the PHY */
+ qusb2_setbits(qphy->base, qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN],
+ qphy->cfg->disable_ctrl);
+
+ if (!qphy->has_se_clk_scheme)
+ clk_disable_unprepare(qphy->ref_clk);
+
+ reset_control_assert(qphy->phy_reset);
+
+ clk_disable_unprepare(qphy->cfg_ahb_clk);
+ clk_disable_unprepare(qphy->iface_clk);
+
+ regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+
+ qphy->phy_initialized = false;
+
+ return 0;
+}
+
+static const struct phy_ops qusb2_phy_gen_ops = {
+ .init = qusb2_phy_init,
+ .exit = qusb2_phy_exit,
+ .set_mode = qusb2_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id qusb2_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,ipq6018-qusb2-phy",
+ .data = &ipq6018_phy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qusb2-phy",
+ .data = &msm8996_phy_cfg,
+ }, {
+ .compatible = "qcom,msm8953-qusb2-phy",
+ .data = &msm8996_phy_cfg,
+ }, {
+ .compatible = "qcom,msm8996-qusb2-phy",
+ .data = &msm8996_phy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qusb2-phy",
+ .data = &msm8998_phy_cfg,
+ }, {
+ .compatible = "qcom,qcm2290-qusb2-phy",
+ .data = &sm6115_phy_cfg,
+ }, {
+ .compatible = "qcom,sdm660-qusb2-phy",
+ .data = &sdm660_phy_cfg,
+ }, {
+ .compatible = "qcom,sm4250-qusb2-phy",
+ .data = &sm6115_phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qusb2-phy",
+ .data = &sm6115_phy_cfg,
+ }, {
+ /*
+ * Deprecated. Only here to support legacy device
+ * trees that didn't include "qcom,qusb2-v2-phy"
+ */
+ .compatible = "qcom,sdm845-qusb2-phy",
+ .data = &qusb2_v2_phy_cfg,
+ }, {
+ .compatible = "qcom,qusb2-v2-phy",
+ .data = &qusb2_v2_phy_cfg,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table);
+
+static const struct dev_pm_ops qusb2_phy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qusb2_phy_runtime_suspend,
+ qusb2_phy_runtime_resume, NULL)
+};
+
+static int qusb2_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct qusb2_phy *qphy;
+ struct phy_provider *phy_provider;
+ struct phy *generic_phy;
+ int ret, i;
+ int num;
+ u32 value;
+ struct override_params *or;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+ or = &qphy->overrides;
+
+ qphy->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(qphy->base))
+ return PTR_ERR(qphy->base);
+
+ qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb");
+ if (IS_ERR(qphy->cfg_ahb_clk))
+ return dev_err_probe(dev, PTR_ERR(qphy->cfg_ahb_clk),
+ "failed to get cfg ahb clk\n");
+
+ qphy->ref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(qphy->ref_clk))
+ return dev_err_probe(dev, PTR_ERR(qphy->ref_clk),
+ "failed to get ref clk\n");
+
+ qphy->iface_clk = devm_clk_get_optional(dev, "iface");
+ if (IS_ERR(qphy->iface_clk))
+ return PTR_ERR(qphy->iface_clk);
+
+ qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0);
+ if (IS_ERR(qphy->phy_reset)) {
+ dev_err(dev, "failed to get phy core reset\n");
+ return PTR_ERR(qphy->phy_reset);
+ }
+
+ num = ARRAY_SIZE(qphy->vregs);
+ for (i = 0; i < num; i++)
+ qphy->vregs[i].supply = qusb2_phy_vreg_names[i];
+
+ ret = devm_regulator_bulk_get(dev, num, qphy->vregs);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to get regulator supplies\n");
+
+ /* Get the specific init parameters of QMP phy */
+ qphy->cfg = of_device_get_match_data(dev);
+
+ qphy->tcsr = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "qcom,tcsr-syscon");
+ if (IS_ERR(qphy->tcsr)) {
+ dev_dbg(dev, "failed to lookup TCSR regmap\n");
+ qphy->tcsr = NULL;
+ }
+
+ qphy->cell = devm_nvmem_cell_get(dev, NULL);
+ if (IS_ERR(qphy->cell)) {
+ if (PTR_ERR(qphy->cell) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ qphy->cell = NULL;
+ dev_dbg(dev, "failed to lookup tune2 hstx trim value\n");
+ }
+
+ if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value",
+ &value)) {
+ or->imp_res_offset.value = (u8)value;
+ or->imp_res_offset.override = true;
+ }
+
+ if (!of_property_read_u32(dev->of_node, "qcom,bias-ctrl-value",
+ &value)) {
+ or->bias_ctrl.value = (u8)value;
+ or->bias_ctrl.override = true;
+ }
+
+ if (!of_property_read_u32(dev->of_node, "qcom,charge-ctrl-value",
+ &value)) {
+ or->charge_ctrl.value = (u8)value;
+ or->charge_ctrl.override = true;
+ }
+
+ if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value",
+ &value)) {
+ or->hstx_trim.value = (u8)value;
+ or->hstx_trim.override = true;
+ }
+
+ if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level",
+ &value)) {
+ or->preemphasis.value = (u8)value;
+ or->preemphasis.override = true;
+ }
+
+ if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width",
+ &value)) {
+ or->preemphasis_width.value = (u8)value;
+ or->preemphasis_width.override = true;
+ }
+
+ if (!of_property_read_u32(dev->of_node, "qcom,hsdisc-trim-value",
+ &value)) {
+ or->hsdisc_trim.value = (u8)value;
+ or->hsdisc_trim.override = true;
+ }
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
+ generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create phy, %d\n", ret);
+ pm_runtime_disable(dev);
+ return ret;
+ }
+ qphy->phy = generic_phy;
+
+ dev_set_drvdata(dev, qphy);
+ phy_set_drvdata(generic_phy, qphy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Qcom-QUSB2 phy\n");
+ else
+ pm_runtime_disable(dev);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver qusb2_phy_driver = {
+ .probe = qusb2_phy_probe,
+ .driver = {
+ .name = "qcom-qusb2-phy",
+ .pm = &qusb2_phy_pm_ops,
+ .of_match_table = qusb2_phy_of_match_table,
+ },
+};
+
+module_platform_driver(qusb2_phy_driver);
+
+MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm QUSB2 PHY driver");
+MODULE_LICENSE("GPL v2");