diff options
Diffstat (limited to 'drivers/phy/sunplus/phy-sunplus-usb2.c')
| -rw-r--r-- | drivers/phy/sunplus/phy-sunplus-usb2.c | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/drivers/phy/sunplus/phy-sunplus-usb2.c b/drivers/phy/sunplus/phy-sunplus-usb2.c new file mode 100644 index 000000000..56de41091 --- /dev/null +++ b/drivers/phy/sunplus/phy-sunplus-usb2.c @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Sunplus SP7021 USB 2.0 phy driver + * + * Copyright (C) 2022 Sunplus Technology Inc., All rights reserved. + * + * Note 1 : non-posted write command for the registers accesses of + * Sunplus SP7021. + * + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/reset.h> + +#define HIGH_MASK_BITS GENMASK(31, 16) +#define LOW_MASK_BITS GENMASK(15, 0) +#define OTP_DISC_LEVEL_DEFAULT 0xd + +/* GROUP UPHY */ +#define CONFIG1 0x4 +#define J_HS_TX_PWRSAV BIT(5) +#define CONFIG3 0xc +#define J_FORCE_DISC_ON BIT(5) +#define J_DEBUG_CTRL_ADDR_MACRO BIT(0) +#define CONFIG7 0x1c +#define J_DISC 0X1f +#define CONFIG9 0x24 +#define J_ECO_PATH BIT(6) +#define CONFIG16 0x40 +#define J_TBCWAIT_MASK GENMASK(6, 5) +#define J_TBCWAIT_1P1_MS FIELD_PREP(J_TBCWAIT_MASK, 0) +#define J_TVDM_SRC_DIS_MASK GENMASK(4, 3) +#define J_TVDM_SRC_DIS_8P2_MS FIELD_PREP(J_TVDM_SRC_DIS_MASK, 3) +#define J_TVDM_SRC_EN_MASK GENMASK(2, 1) +#define J_TVDM_SRC_EN_1P6_MS FIELD_PREP(J_TVDM_SRC_EN_MASK, 0) +#define J_BC_EN BIT(0) +#define CONFIG17 0x44 +#define IBG_TRIM0_MASK GENMASK(7, 5) +#define IBG_TRIM0_SSLVHT FIELD_PREP(IBG_TRIM0_MASK, 4) +#define J_VDATREE_TRIM_MASK GENMASK(4, 1) +#define J_VDATREE_TRIM_DEFAULT FIELD_PREP(J_VDATREE_TRIM_MASK, 9) +#define CONFIG23 0x5c +#define PROB_MASK GENMASK(5, 3) +#define PROB FIELD_PREP(PROB_MASK, 7) + +/* GROUP MOON4 */ +#define UPHY_CONTROL0 0x0 +#define UPHY_CONTROL1 0x4 +#define UPHY_CONTROL2 0x8 +#define MO1_UPHY_RX_CLK_SEL BIT(6) +#define MASK_MO1_UPHY_RX_CLK_SEL BIT(6 + 16) +#define UPHY_CONTROL3 0xc +#define MO1_UPHY_PLL_POWER_OFF_SEL BIT(7) +#define MASK_MO1_UPHY_PLL_POWER_OFF_SEL BIT(7 + 16) +#define MO1_UPHY_PLL_POWER_OFF BIT(3) +#define MASK_UPHY_PLL_POWER_OFF BIT(3 + 16) + +struct sp_usbphy { + struct device *dev; + struct resource *phy_res_mem; + struct resource *moon4_res_mem; + struct reset_control *rstc; + struct clk *phy_clk; + void __iomem *phy_regs; + void __iomem *moon4_regs; + u32 disc_vol_addr_off; +}; + +static int update_disc_vol(struct sp_usbphy *usbphy) +{ + struct nvmem_cell *cell; + char *disc_name = "disc_vol"; + ssize_t otp_l = 0; + char *otp_v; + u32 val, set; + + cell = nvmem_cell_get(usbphy->dev, disc_name); + if (IS_ERR_OR_NULL(cell)) { + if (PTR_ERR(cell) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + + otp_v = nvmem_cell_read(cell, &otp_l); + nvmem_cell_put(cell); + + if (!IS_ERR(otp_v)) { + set = *(otp_v + 1); + set = (set << (sizeof(char) * 8)) | *otp_v; + set = (set >> usbphy->disc_vol_addr_off) & J_DISC; + } + + if (IS_ERR(otp_v) || set == 0) + set = OTP_DISC_LEVEL_DEFAULT; + + val = readl(usbphy->phy_regs + CONFIG7); + val = (val & ~J_DISC) | set; + writel(val, usbphy->phy_regs + CONFIG7); + + return 0; +} + +static int sp_uphy_init(struct phy *phy) +{ + struct sp_usbphy *usbphy = phy_get_drvdata(phy); + u32 val; + int ret; + + ret = clk_prepare_enable(usbphy->phy_clk); + if (ret) + goto err_clk; + + ret = reset_control_deassert(usbphy->rstc); + if (ret) + goto err_reset; + + /* Default value modification */ + writel(HIGH_MASK_BITS | 0x4002, usbphy->moon4_regs + UPHY_CONTROL0); + writel(HIGH_MASK_BITS | 0x8747, usbphy->moon4_regs + UPHY_CONTROL1); + + /* disconnect voltage */ + ret = update_disc_vol(usbphy); + if (ret < 0) + return ret; + + /* board uphy 0 internal register modification for tid certification */ + val = readl(usbphy->phy_regs + CONFIG9); + val &= ~(J_ECO_PATH); + writel(val, usbphy->phy_regs + CONFIG9); + + val = readl(usbphy->phy_regs + CONFIG1); + val &= ~(J_HS_TX_PWRSAV); + writel(val, usbphy->phy_regs + CONFIG1); + + val = readl(usbphy->phy_regs + CONFIG23); + val = (val & ~PROB) | PROB; + writel(val, usbphy->phy_regs + CONFIG23); + + /* port 0 uphy clk fix */ + writel(MASK_MO1_UPHY_RX_CLK_SEL | MO1_UPHY_RX_CLK_SEL, + usbphy->moon4_regs + UPHY_CONTROL2); + + /* battery charger */ + writel(J_TBCWAIT_1P1_MS | J_TVDM_SRC_DIS_8P2_MS | J_TVDM_SRC_EN_1P6_MS | J_BC_EN, + usbphy->phy_regs + CONFIG16); + writel(IBG_TRIM0_SSLVHT | J_VDATREE_TRIM_DEFAULT, usbphy->phy_regs + CONFIG17); + + /* chirp mode */ + writel(J_FORCE_DISC_ON | J_DEBUG_CTRL_ADDR_MACRO, usbphy->phy_regs + CONFIG3); + + return 0; + +err_reset: + reset_control_assert(usbphy->rstc); +err_clk: + clk_disable_unprepare(usbphy->phy_clk); + + return ret; +} + +static int sp_uphy_power_on(struct phy *phy) +{ + struct sp_usbphy *usbphy = phy_get_drvdata(phy); + u32 pll_pwr_on, pll_pwr_off; + + /* PLL power off/on twice */ + pll_pwr_off = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~LOW_MASK_BITS) + | MO1_UPHY_PLL_POWER_OFF_SEL | MO1_UPHY_PLL_POWER_OFF; + pll_pwr_on = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~LOW_MASK_BITS) + | MO1_UPHY_PLL_POWER_OFF_SEL; + + writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_off, + usbphy->moon4_regs + UPHY_CONTROL3); + mdelay(1); + writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_on, + usbphy->moon4_regs + UPHY_CONTROL3); + mdelay(1); + writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_off, + usbphy->moon4_regs + UPHY_CONTROL3); + mdelay(1); + writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_on, + usbphy->moon4_regs + UPHY_CONTROL3); + mdelay(1); + writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | 0x0, + usbphy->moon4_regs + UPHY_CONTROL3); + + return 0; +} + +static int sp_uphy_power_off(struct phy *phy) +{ + struct sp_usbphy *usbphy = phy_get_drvdata(phy); + u32 pll_pwr_off; + + pll_pwr_off = (readl(usbphy->moon4_regs + UPHY_CONTROL3) & ~LOW_MASK_BITS) + | MO1_UPHY_PLL_POWER_OFF_SEL | MO1_UPHY_PLL_POWER_OFF; + + writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | pll_pwr_off, + usbphy->moon4_regs + UPHY_CONTROL3); + mdelay(1); + writel(MASK_MO1_UPHY_PLL_POWER_OFF_SEL | MASK_UPHY_PLL_POWER_OFF | 0x0, + usbphy->moon4_regs + UPHY_CONTROL3); + + return 0; +} + +static int sp_uphy_exit(struct phy *phy) +{ + struct sp_usbphy *usbphy = phy_get_drvdata(phy); + + reset_control_assert(usbphy->rstc); + clk_disable_unprepare(usbphy->phy_clk); + + return 0; +} + +static const struct phy_ops sp_uphy_ops = { + .init = sp_uphy_init, + .power_on = sp_uphy_power_on, + .power_off = sp_uphy_power_off, + .exit = sp_uphy_exit, +}; + +static const struct of_device_id sp_uphy_dt_ids[] = { + {.compatible = "sunplus,sp7021-usb2-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, sp_uphy_dt_ids); + +static int sp_usb_phy_probe(struct platform_device *pdev) +{ + struct sp_usbphy *usbphy; + struct phy_provider *phy_provider; + struct phy *phy; + int ret; + + usbphy = devm_kzalloc(&pdev->dev, sizeof(*usbphy), GFP_KERNEL); + if (!usbphy) + return -ENOMEM; + + usbphy->dev = &pdev->dev; + + usbphy->phy_res_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); + usbphy->phy_regs = devm_ioremap_resource(&pdev->dev, usbphy->phy_res_mem); + if (IS_ERR(usbphy->phy_regs)) + return PTR_ERR(usbphy->phy_regs); + + usbphy->moon4_res_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "moon4"); + if (!usbphy->moon4_res_mem) + return -EINVAL; + + usbphy->moon4_regs = devm_ioremap(&pdev->dev, usbphy->moon4_res_mem->start, + resource_size(usbphy->moon4_res_mem)); + if (!usbphy->moon4_regs) + return -ENOMEM; + + usbphy->phy_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(usbphy->phy_clk)) + return PTR_ERR(usbphy->phy_clk); + + usbphy->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(usbphy->rstc)) + return PTR_ERR(usbphy->rstc); + + of_property_read_u32(pdev->dev.of_node, "sunplus,disc-vol-addr-off", + &usbphy->disc_vol_addr_off); + + phy = devm_phy_create(&pdev->dev, NULL, &sp_uphy_ops); + if (IS_ERR(phy)) { + ret = -PTR_ERR(phy); + return ret; + } + + phy_set_drvdata(phy, usbphy); + phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver sunplus_usb_phy_driver = { + .probe = sp_usb_phy_probe, + .driver = { + .name = "sunplus-usb2-phy", + .of_match_table = sp_uphy_dt_ids, + }, +}; +module_platform_driver(sunplus_usb_phy_driver); + +MODULE_AUTHOR("Vincent Shih <vincent.shih@sunplus.com>"); +MODULE_DESCRIPTION("Sunplus USB 2.0 phy driver"); +MODULE_LICENSE("GPL"); |